staging: brcm80211: cleanup on the brcm80211 include directory

moved several files to specific source directory as these do not
need to be shared between drivers. Also removed some unused include
files from the include directory.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 98 insertions, 0 deletions

diff --git a/drivers/staging/brcm80211/brcmfmac/bcmcdc.h b/drivers/staging/brcm80211/brcmfmac/bcmcdc.h
new file mode 100644
index 000000000000..ed4c4a517eca
--- /dev/null
+++ b/drivers/staging/brcm80211/brcmfmac/bcmcdc.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/if_ether.h>
+
+typedef struct cdc_ioctl {
+	u32 cmd;		/* ioctl command value */
+	u32 len;		/* lower 16: output buflen; upper 16:
+				 input buflen (excludes header) */
+	u32 flags;		/* flag defns given below */
+	u32 status;		/* status code returned from the device */
+} cdc_ioctl_t;
+
+/* Max valid buffer size that can be sent to the dongle */
+#define CDC_MAX_MSG_SIZE	(ETH_FRAME_LEN+ETH_FCS_LEN)
+
+/* len field is divided into input and output buffer lengths */
+#define CDCL_IOC_OUTLEN_MASK   0x0000FFFF	/* maximum or expected
+						 response length, */
+					   /* excluding IOCTL header */
+#define CDCL_IOC_OUTLEN_SHIFT  0
+#define CDCL_IOC_INLEN_MASK    0xFFFF0000	/* input buffer length,
+						 excluding IOCTL header */
+#define CDCL_IOC_INLEN_SHIFT   16
+
+/* CDC flag definitions */
+#define CDCF_IOC_ERROR		0x01	/* 0=success, 1=ioctl cmd failed */
+#define CDCF_IOC_SET		0x02	/* 0=get, 1=set cmd */
+#define CDCF_IOC_IF_MASK	0xF000	/* I/F index */
+#define CDCF_IOC_IF_SHIFT	12
+#define CDCF_IOC_ID_MASK	0xFFFF0000	/* used to uniquely id an ioctl
+						 req/resp pairing */
+#define CDCF_IOC_ID_SHIFT	16	/* # of bits of shift for ID Mask */
+
+#define CDC_IOC_IF_IDX(flags)	\
+	(((flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT)
+#define CDC_IOC_ID(flags)	\
+	(((flags) & CDCF_IOC_ID_MASK) >> CDCF_IOC_ID_SHIFT)
+
+#define CDC_GET_IF_IDX(hdr) \
+	((int)((((hdr)->flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT))
+#define CDC_SET_IF_IDX(hdr, idx) \
+	((hdr)->flags = (((hdr)->flags & ~CDCF_IOC_IF_MASK) | \
+	((idx) << CDCF_IOC_IF_SHIFT)))
+
+/*
+ * BDC header
+ *
+ *   The BDC header is used on data packets to convey priority across USB.
+ */
+
+#define	BDC_HEADER_LEN		4
+
+#define BDC_PROTO_VER		1	/* Protocol version */
+
+#define BDC_FLAG_VER_MASK	0xf0	/* Protocol version mask */
+#define BDC_FLAG_VER_SHIFT	4	/* Protocol version shift */
+
+#define BDC_FLAG__UNUSED	0x03	/* Unassigned */
+#define BDC_FLAG_SUM_GOOD	0x04	/* Dongle has verified good
+					 RX checksums */
+#define BDC_FLAG_SUM_NEEDED	0x08	/* Dongle needs to do TX checksums */
+
+#define BDC_PRIORITY_MASK	0x7
+
+#define BDC_FLAG2_FC_FLAG	0x10	/* flag to indicate if pkt contains */
+						/* FLOW CONTROL info only */
+#define BDC_PRIORITY_FC_SHIFT	4	/* flow control info shift */
+
+#define BDC_FLAG2_IF_MASK	0x0f	/* APSTA: interface on which the
+					 packet was received */
+#define BDC_FLAG2_IF_SHIFT	0
+
+#define BDC_GET_IF_IDX(hdr) \
+	((int)((((hdr)->flags2) & BDC_FLAG2_IF_MASK) >> BDC_FLAG2_IF_SHIFT))
+#define BDC_SET_IF_IDX(hdr, idx) \
+	((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_IF_MASK) | \
+	((idx) << BDC_FLAG2_IF_SHIFT)))
+
+struct bdc_header {
+	u8 flags;		/* Flags */
+	u8 priority;		/* 802.1d Priority 0:2 bits, 4:7 flow
+				 control info for usb */
+	u8 flags2;
+	u8 rssi;
+};