Add support for aspeed hardware

3 files changed, 45 insertions, 5 deletions

diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 403aa505f27e..b0068f76778b 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -24,12 +24,14 @@ struct mmc_cid {
 };
 
 struct mmc_csd {
+	unsigned char		structure;
 	unsigned char		mmca_vsn;
 	unsigned short		cmdclass;
 	unsigned short		tacc_clks;
 	unsigned int		tacc_ns;
 	unsigned int		r2w_factor;
 	unsigned int		max_dtr;
+	unsigned int		erase_size;		/* In sectors */
 	unsigned int		read_blkbits;
 	unsigned int		write_blkbits;
 	unsigned int		capacity;
@@ -40,8 +42,17 @@ struct mmc_csd {
 };
 
 struct mmc_ext_csd {
+	u8			rev;
+	u8			erase_group_def;
+	u8			sec_feature_support;
+	unsigned int		sa_timeout;		/* Units: 100ns */
 	unsigned int		hs_max_dtr;
 	unsigned int		sectors;
+	unsigned int		hc_erase_size;		/* In sectors */
+	unsigned int		hc_erase_timeout;	/* In milliseconds */
+	unsigned int		sec_trim_mult;	/* Secure trim multiplier  */
+	unsigned int		sec_erase_mult;	/* Secure erase multiplier */
+	unsigned int		trim_timeout;		/* In milliseconds */
 };
 
 struct sd_scr {
@@ -89,12 +100,18 @@ struct mmc_card {
 #define MMC_TYPE_MMC		0		/* MMC card */
 #define MMC_TYPE_SD		1		/* SD card */
 #define MMC_TYPE_SDIO		2		/* SDIO card */
+#define MMC_TYPE_SD_COMBO	3		/* SD combo (IO+mem) card */
 	unsigned int		state;		/* (our) card state */
 #define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
 #define MMC_STATE_READONLY	(1<<1)		/* card is read-only */
 #define MMC_STATE_HIGHSPEED	(1<<2)		/* card is in high speed mode */
 #define MMC_STATE_BLOCKADDR	(1<<3)		/* card uses block-addressing */
 
+	unsigned int		erase_size;	/* erase size in sectors */
+ 	unsigned int		erase_shift;	/* if erase unit is power 2 */
+ 	unsigned int		pref_erase;	/* in sectors */
+ 	u8			erased_byte;	/* value of erased bytes */
+
 	u32			raw_cid[4];	/* raw card CID */
 	u32			raw_csd[4];	/* raw card CSD */
 	u32			raw_scr[2];	/* raw card SCR */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 14b81f3e5232..dd11ae51fb68 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -31,6 +31,7 @@
 #define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
 #define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
 #define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
+#define MMC_SLEEP_AWAKE		  5   /* ac   [31:16] RCA 15:flg R1b */
 #define MMC_SWITCH                6   /* ac   [31:0] See below   R1b */
 #define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
 #define MMC_SEND_EXT_CSD          8   /* adtc                    R1  */
@@ -127,6 +128,7 @@
 #define R1_STATUS(x)            (x & 0xFFFFE000)
 #define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
 #define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
+#define R1_SWITCH_ERROR		(1 << 7)	/* sx, c */
 #define R1_APP_CMD		(1 << 5)	/* sr, c */
 
 /*
@@ -249,11 +251,21 @@ struct _mmc_csd {
  * EXT_CSD fields
  */
 
-#define EXT_CSD_BUS_WIDTH	183	/* R/W */
-#define EXT_CSD_HS_TIMING	185	/* R/W */
-#define EXT_CSD_CARD_TYPE	196	/* RO */
-#define EXT_CSD_REV		192	/* RO */
-#define EXT_CSD_SEC_CNT		212	/* RO, 4 bytes */
+#define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
+#define EXT_CSD_ERASED_MEM_CONT		181	/* RO */
+#define EXT_CSD_BUS_WIDTH		183	/* R/W */
+#define EXT_CSD_HS_TIMING		185	/* R/W */
+#define EXT_CSD_REV			192	/* RO */
+#define EXT_CSD_STRUCTURE		194	/* RO */
+#define EXT_CSD_CARD_TYPE		196	/* RO */
+#define EXT_CSD_SEC_CNT			212	/* RO, 4 bytes */
+#define EXT_CSD_S_A_TIMEOUT		217	/* RO */
+#define EXT_CSD_ERASE_TIMEOUT_MULT	223	/* RO */
+#define EXT_CSD_HC_ERASE_GRP_SIZE	224	/* RO */
+#define EXT_CSD_SEC_TRIM_MULT		229	/* RO */
+#define EXT_CSD_SEC_ERASE_MULT		230	/* RO */
+#define EXT_CSD_SEC_FEATURE_SUPPORT	231	/* RO */
+#define EXT_CSD_TRIM_MULT		232	/* RO */
 
 /*
  * EXT_CSD field definitions
@@ -265,11 +277,16 @@ struct _mmc_csd {
 
 #define EXT_CSD_CARD_TYPE_26	(1<<0)	/* Card can run at 26MHz */
 #define EXT_CSD_CARD_TYPE_52	(1<<1)	/* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_MASK	0x3	/* Mask out reserved and DDR bits */
 
 #define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
 #define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
 #define EXT_CSD_BUS_WIDTH_8	2	/* Card is in 8 bit mode */
 
+#define EXT_CSD_SEC_ER_EN	BIT(0)
+#define EXT_CSD_SEC_BD_BLK_EN	BIT(2)
+#define EXT_CSD_SEC_GB_CL_EN	BIT(4)
+
 /*
  * MMC_SWITCH access modes
  */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 733d3f3b4eb8..ff8a12495ff8 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -599,6 +599,12 @@ struct platform_nand_ctrl {
 	void		(*select_chip)(struct mtd_info *mtd, int chip);
 	void		(*cmd_ctrl)(struct mtd_info *mtd, int dat,
 				    unsigned int ctrl);
+	int 	(*calculate)(struct mtd_info *mtd,
+					 const uint8_t *dat,
+					 uint8_t *ecc_code);
+	int 		(*correct)(struct mtd_info *mtd, uint8_t *dat,
+					   uint8_t *read_ecc,
+					   uint8_t *calc_ecc);
 	void		*priv;
 };