Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

124 files changed, 43777 insertions, 0 deletions

diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
new file mode 100644
index 000000000000..933787a46b4c
--- /dev/null
+++ b/arch/i386/kernel/Makefile
@@ -0,0 +1,71 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := head.o init_task.o vmlinux.lds
+
+obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
+		ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
+		pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
+		doublefault.o quirks.o
+
+obj-y				+= cpu/
+obj-y				+= timers/
+obj-$(CONFIG_ACPI_BOOT)		+= acpi/
+obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot.o
+obj-$(CONFIG_MCA)		+= mca.o
+obj-$(CONFIG_X86_MSR)		+= msr.o
+obj-$(CONFIG_X86_CPUID)		+= cpuid.o
+obj-$(CONFIG_MICROCODE)		+= microcode.o
+obj-$(CONFIG_APM)		+= apm.o
+obj-$(CONFIG_X86_SMP)		+= smp.o smpboot.o
+obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
+obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o nmi.o
+obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
+obj-$(CONFIG_X86_NUMAQ)		+= numaq.o
+obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_MODULES)		+= module.o
+obj-y				+= sysenter.o vsyscall.o
+obj-$(CONFIG_ACPI_SRAT) 	+= srat.o
+obj-$(CONFIG_HPET_TIMER) 	+= time_hpet.o
+obj-$(CONFIG_EFI) 		+= efi.o efi_stub.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+
+EXTRA_AFLAGS   := -traditional
+
+obj-$(CONFIG_SCx200)		+= scx200.o
+
+# vsyscall.o contains the vsyscall DSO images as __initdata.
+# We must build both images before we can assemble it.
+# Note: kbuild does not track this dependency due to usage of .incbin
+$(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
+targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
+targets += vsyscall.lds
+
+# The DSO images are built using a special linker script.
+quiet_cmd_syscall = SYSCALL $@
+      cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
+		          -Wl,-T,$(filter-out FORCE,$^) -o $@
+
+export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH)
+
+vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1
+SYSCFLAGS_vsyscall-sysenter.so	= $(vsyscall-flags)
+SYSCFLAGS_vsyscall-int80.so	= $(vsyscall-flags)
+
+$(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so: \
+$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
+	$(call if_changed,syscall)
+
+# We also create a special relocatable object that should mirror the symbol
+# table and layout of the linked DSO.  With ld -R we can then refer to
+# these symbols in the kernel code rather than hand-coded addresses.
+extra-y += vsyscall-syms.o
+$(obj)/built-in.o: $(obj)/vsyscall-syms.o
+$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
+
+SYSCFLAGS_vsyscall-syms.o = -r
+$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds $(obj)/vsyscall-sysenter.o FORCE
+	$(call if_changed,syscall)
diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile
new file mode 100644
index 000000000000..ee75cb286cfe
--- /dev/null
+++ b/arch/i386/kernel/acpi/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_ACPI_BOOT)		:= boot.o
+obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
+obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
+
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
new file mode 100644
index 000000000000..9ba0b957d11f
--- /dev/null
+++ b/arch/i386/kernel/acpi/boot.c
@@ -0,0 +1,908 @@
+/*
+ *  boot.c - Architecture-Specific Low-Level ACPI Boot Support
+ *
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/pgtable.h>
+#include <asm/io_apic.h>
+#include <asm/apic.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpspec.h>
+
+#ifdef	CONFIG_X86_64
+
+static inline void  acpi_madt_oem_check(char *oem_id, char *oem_table_id) { }
+extern void __init clustered_apic_check(void);
+static inline int ioapic_setup_disabled(void) { return 0; }
+#include <asm/proto.h>
+
+#else	/* X86 */
+
+#ifdef	CONFIG_X86_LOCAL_APIC
+#include <mach_apic.h>
+#include <mach_mpparse.h>
+#endif	/* CONFIG_X86_LOCAL_APIC */
+
+#endif	/* X86 */
+
+#define BAD_MADT_ENTRY(entry, end) (					    \
+		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
+		((acpi_table_entry_header *)entry)->length != sizeof(*entry))
+
+#define PREFIX			"ACPI: "
+
+#ifdef CONFIG_ACPI_PCI
+int acpi_noirq __initdata;	/* skip ACPI IRQ initialization */
+int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
+#else
+int acpi_noirq __initdata = 1;
+int acpi_pci_disabled __initdata = 1;
+#endif
+int acpi_ht __initdata = 1;	/* enable HT */
+
+int acpi_lapic;
+int acpi_ioapic;
+int acpi_strict;
+EXPORT_SYMBOL(acpi_strict);
+
+acpi_interrupt_flags acpi_sci_flags __initdata;
+int acpi_sci_override_gsi __initdata;
+int acpi_skip_timer_override __initdata;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
+#endif
+
+#ifndef __HAVE_ARCH_CMPXCHG
+#warning ACPI uses CMPXCHG, i486 and later hardware
+#endif
+
+#define MAX_MADT_ENTRIES	256
+u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] =
+			{ [0 ... MAX_MADT_ENTRIES-1] = 0xff };
+EXPORT_SYMBOL(x86_acpiid_to_apicid);
+
+/* --------------------------------------------------------------------------
+                              Boot-time Configuration
+   -------------------------------------------------------------------------- */
+
+/*
+ * The default interrupt routing model is PIC (8259).  This gets
+ * overriden if IOAPICs are enumerated (below).
+ */
+enum acpi_irq_model_id		acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+
+#ifdef	CONFIG_X86_64
+
+/* rely on all ACPI tables being in the direct mapping */
+char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
+{
+	if (!phys_addr || !size)
+	return NULL;
+
+	if (phys_addr < (end_pfn_map << PAGE_SHIFT))
+		return __va(phys_addr);
+
+	return NULL;
+}
+
+#else
+
+/*
+ * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
+ * to map the target physical address. The problem is that set_fixmap()
+ * provides a single page, and it is possible that the page is not
+ * sufficient.
+ * By using this area, we can map up to MAX_IO_APICS pages temporarily,
+ * i.e. until the next __va_range() call.
+ *
+ * Important Safety Note:  The fixed I/O APIC page numbers are *subtracted*
+ * from the fixed base.  That's why we start at FIX_IO_APIC_BASE_END and
+ * count idx down while incrementing the phys address.
+ */
+char *__acpi_map_table(unsigned long phys, unsigned long size)
+{
+	unsigned long base, offset, mapped_size;
+	int idx;
+
+	if (phys + size < 8*1024*1024) 
+		return __va(phys); 
+
+	offset = phys & (PAGE_SIZE - 1);
+	mapped_size = PAGE_SIZE - offset;
+	set_fixmap(FIX_ACPI_END, phys);
+	base = fix_to_virt(FIX_ACPI_END);
+
+	/*
+	 * Most cases can be covered by the below.
+	 */
+	idx = FIX_ACPI_END;
+	while (mapped_size < size) {
+		if (--idx < FIX_ACPI_BEGIN)
+			return NULL;	/* cannot handle this */
+		phys += PAGE_SIZE;
+		set_fixmap(idx, phys);
+		mapped_size += PAGE_SIZE;
+	}
+
+	return ((unsigned char *) base + offset);
+}
+#endif
+
+#ifdef CONFIG_PCI_MMCONFIG
+static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+{
+	struct acpi_table_mcfg *mcfg;
+
+	if (!phys_addr || !size)
+		return -EINVAL;
+
+	mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size);
+	if (!mcfg) {
+		printk(KERN_WARNING PREFIX "Unable to map MCFG\n");
+		return -ENODEV;
+	}
+
+	if (mcfg->base_reserved) {
+		printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n");
+		return -ENODEV;
+	}
+
+	pci_mmcfg_base_addr = mcfg->base_address;
+
+	return 0;
+}
+#else
+#define	acpi_parse_mcfg NULL
+#endif /* !CONFIG_PCI_MMCONFIG */
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static int __init
+acpi_parse_madt (
+	unsigned long		phys_addr,
+	unsigned long		size)
+{
+	struct acpi_table_madt	*madt = NULL;
+
+	if (!phys_addr || !size)
+		return -EINVAL;
+
+	madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size);
+	if (!madt) {
+		printk(KERN_WARNING PREFIX "Unable to map MADT\n");
+		return -ENODEV;
+	}
+
+	if (madt->lapic_address) {
+		acpi_lapic_addr = (u64) madt->lapic_address;
+
+		printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
+			madt->lapic_address);
+	}
+
+	acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
+	
+	return 0;
+}
+
+
+static int __init
+acpi_parse_lapic (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_lapic	*processor = NULL;
+
+	processor = (struct acpi_table_lapic*) header;
+
+	if (BAD_MADT_ENTRY(processor, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	/* no utility in registering a disabled processor */
+	if (processor->flags.enabled == 0)
+		return 0;
+
+	x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
+
+	mp_register_lapic (
+		processor->id,					   /* APIC ID */
+		processor->flags.enabled);			  /* Enabled? */
+
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic_addr_ovr (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;
+
+	lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header;
+
+	if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
+		return -EINVAL;
+
+	acpi_lapic_addr = lapic_addr_ovr->address;
+
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic_nmi (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_lapic_nmi *lapic_nmi = NULL;
+
+	lapic_nmi = (struct acpi_table_lapic_nmi*) header;
+
+	if (BAD_MADT_ENTRY(lapic_nmi, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	if (lapic_nmi->lint != 1)
+		printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
+
+	return 0;
+}
+
+
+#endif /*CONFIG_X86_LOCAL_APIC*/
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+
+static int __init
+acpi_parse_ioapic (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_ioapic *ioapic = NULL;
+
+	ioapic = (struct acpi_table_ioapic*) header;
+
+	if (BAD_MADT_ENTRY(ioapic, end))
+		return -EINVAL;
+ 
+	acpi_table_print_madt_entry(header);
+
+	mp_register_ioapic (
+		ioapic->id,
+		ioapic->address,
+		ioapic->global_irq_base);
+ 
+	return 0;
+}
+
+/*
+ * Parse Interrupt Source Override for the ACPI SCI
+ */
+static void
+acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+{
+	if (trigger == 0)	/* compatible SCI trigger is level */
+		trigger = 3;
+
+	if (polarity == 0)	/* compatible SCI polarity is low */
+		polarity = 3;
+
+	/* Command-line over-ride via acpi_sci= */
+	if (acpi_sci_flags.trigger)
+		trigger = acpi_sci_flags.trigger;
+
+	if (acpi_sci_flags.polarity)
+		polarity = acpi_sci_flags.polarity;
+
+	/*
+ 	 * mp_config_acpi_legacy_irqs() already setup IRQs < 16
+	 * If GSI is < 16, this will update its flags,
+	 * else it will create a new mp_irqs[] entry.
+	 */
+	mp_override_legacy_irq(gsi, polarity, trigger, gsi);
+
+	/*
+	 * stash over-ride to indicate we've been here
+	 * and for later update of acpi_fadt
+	 */
+	acpi_sci_override_gsi = gsi;
+	return;
+}
+
+static int __init
+acpi_parse_int_src_ovr (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_int_src_ovr *intsrc = NULL;
+
+	intsrc = (struct acpi_table_int_src_ovr*) header;
+
+	if (BAD_MADT_ENTRY(intsrc, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	if (intsrc->bus_irq == acpi_fadt.sci_int) {
+		acpi_sci_ioapic_setup(intsrc->global_irq,
+			intsrc->flags.polarity, intsrc->flags.trigger);
+		return 0;
+	}
+
+	if (acpi_skip_timer_override &&
+		intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
+			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+			return 0;
+	}
+
+	mp_override_legacy_irq (
+		intsrc->bus_irq,
+		intsrc->flags.polarity,
+		intsrc->flags.trigger,
+		intsrc->global_irq);
+
+	return 0;
+}
+
+
+static int __init
+acpi_parse_nmi_src (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_nmi_src *nmi_src = NULL;
+
+	nmi_src = (struct acpi_table_nmi_src*) header;
+
+	if (BAD_MADT_ENTRY(nmi_src, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	/* TBD: Support nimsrc entries? */
+
+	return 0;
+}
+
+#endif /* CONFIG_X86_IO_APIC */
+
+#ifdef	CONFIG_ACPI_BUS
+
+/*
+ * acpi_pic_sci_set_trigger()
+ * 
+ * use ELCR to set PIC-mode trigger type for SCI
+ *
+ * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
+ * it may require Edge Trigger -- use "acpi_sci=edge"
+ *
+ * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
+ * for the 8259 PIC.  bit[n] = 1 means irq[n] is Level, otherwise Edge.
+ * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
+ */
+
+void __init
+acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
+{
+	unsigned int mask = 1 << irq;
+	unsigned int old, new;
+
+	/* Real old ELCR mask */
+	old = inb(0x4d0) | (inb(0x4d1) << 8);
+
+	/*
+	 * If we use ACPI to set PCI irq's, then we should clear ELCR
+	 * since we will set it correctly as we enable the PCI irq
+	 * routing.
+	 */
+	new = acpi_noirq ? old : 0;
+
+	/*
+	 * Update SCI information in the ELCR, it isn't in the PCI
+	 * routing tables..
+	 */
+	switch (trigger) {
+	case 1:	/* Edge - clear */
+		new &= ~mask;
+		break;
+	case 3: /* Level - set */
+		new |= mask;
+		break;
+	}
+
+	if (old == new)
+		return;
+
+	printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old);
+	outb(new, 0x4d0);
+	outb(new >> 8, 0x4d1);
+}
+
+
+#endif /* CONFIG_ACPI_BUS */
+
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+#ifdef CONFIG_X86_IO_APIC
+	if (use_pci_vector() && !platform_legacy_irq(gsi))
+ 		*irq = IO_APIC_VECTOR(gsi);
+	else
+#endif
+		*irq = gsi;
+	return 0;
+}
+
+unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+{
+	unsigned int irq;
+	unsigned int plat_gsi = gsi;
+
+#ifdef CONFIG_PCI
+	/*
+	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
+	 */
+	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
+		extern void eisa_set_level_irq(unsigned int irq);
+
+		if (edge_level == ACPI_LEVEL_SENSITIVE)
+				eisa_set_level_irq(gsi);
+	}
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
+		plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
+	}
+#endif
+	acpi_gsi_to_irq(plat_gsi, &irq);
+	return irq;
+}
+EXPORT_SYMBOL(acpi_register_gsi);
+
+/*
+ *  ACPI based hotplug support for CPU
+ */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+int
+acpi_map_lsapic(acpi_handle handle, int *pcpu)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_map_lsapic);
+
+
+int
+acpi_unmap_lsapic(int cpu)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_unmap_lsapic);
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+static unsigned long __init
+acpi_scan_rsdp (
+	unsigned long		start,
+	unsigned long		length)
+{
+	unsigned long		offset = 0;
+	unsigned long		sig_len = sizeof("RSD PTR ") - 1;
+
+	/*
+	 * Scan all 16-byte boundaries of the physical memory region for the
+	 * RSDP signature.
+	 */
+	for (offset = 0; offset < length; offset += 16) {
+		if (strncmp((char *) (start + offset), "RSD PTR ", sig_len))
+			continue;
+		return (start + offset);
+	}
+
+	return 0;
+}
+
+static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size)
+{
+	struct acpi_table_sbf *sb;
+
+	if (!phys_addr || !size)
+	return -EINVAL;
+
+	sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size);
+	if (!sb) {
+		printk(KERN_WARNING PREFIX "Unable to map SBF\n");
+		return -ENODEV;
+	}
+
+	sbf_port = sb->sbf_cmos; /* Save CMOS port */
+
+	return 0;
+}
+
+
+#ifdef CONFIG_HPET_TIMER
+
+static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
+{
+	struct acpi_table_hpet *hpet_tbl;
+
+	if (!phys || !size)
+		return -EINVAL;
+
+	hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size);
+	if (!hpet_tbl) {
+		printk(KERN_WARNING PREFIX "Unable to map HPET\n");
+		return -ENODEV;
+	}
+
+	if (hpet_tbl->addr.space_id != ACPI_SPACE_MEM) {
+		printk(KERN_WARNING PREFIX "HPET timers must be located in "
+		       "memory.\n");
+		return -1;
+	}
+
+#ifdef	CONFIG_X86_64
+        vxtime.hpet_address = hpet_tbl->addr.addrl |
+                ((long) hpet_tbl->addr.addrh << 32);
+
+        printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+               hpet_tbl->id, vxtime.hpet_address);
+#else	/* X86 */
+	{
+		extern unsigned long hpet_address;
+
+		hpet_address = hpet_tbl->addr.addrl;
+		printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+			hpet_tbl->id, hpet_address);
+	}
+#endif	/* X86 */
+
+	return 0;
+}
+#else
+#define	acpi_parse_hpet	NULL
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+extern u32 pmtmr_ioport;
+#endif
+
+static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
+{
+	struct fadt_descriptor_rev2 *fadt = NULL;
+
+	fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size);
+	if(!fadt) {
+		printk(KERN_WARNING PREFIX "Unable to map FADT\n");
+		return 0;
+	}
+
+#ifdef	CONFIG_ACPI_INTERPRETER
+	/* initialize sci_int early for INT_SRC_OVR MADT parsing */
+	acpi_fadt.sci_int = fadt->sci_int;
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+	/* detect the location of the ACPI PM Timer */
+	if (fadt->revision >= FADT2_REVISION_ID) {
+		/* FADT rev. 2 */
+		if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO)
+			return 0;
+
+		pmtmr_ioport = fadt->xpm_tmr_blk.address;
+	} else {
+		/* FADT rev. 1 */
+		pmtmr_ioport = fadt->V1_pm_tmr_blk;
+	}
+	if (pmtmr_ioport)
+		printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport);
+#endif
+	return 0;
+}
+
+
+unsigned long __init
+acpi_find_rsdp (void)
+{
+	unsigned long		rsdp_phys = 0;
+
+	if (efi_enabled) {
+		if (efi.acpi20)
+			return __pa(efi.acpi20);
+		else if (efi.acpi)
+			return __pa(efi.acpi);
+	}
+	/*
+	 * Scan memory looking for the RSDP signature. First search EBDA (low
+	 * memory) paragraphs and then search upper memory (E0000-FFFFF).
+	 */
+	rsdp_phys = acpi_scan_rsdp (0, 0x400);
+	if (!rsdp_phys)
+		rsdp_phys = acpi_scan_rsdp (0xE0000, 0xFFFFF);
+
+	return rsdp_phys;
+}
+
+#ifdef	CONFIG_X86_LOCAL_APIC
+/*
+ * Parse LAPIC entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_lapic_entries(void)
+{
+	int count;
+
+	/* 
+	 * Note that the LAPIC address is obtained from the MADT (32-bit value)
+	 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+	 */
+
+	count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
+		return count;
+	}
+
+	mp_register_lapic_address(acpi_lapic_addr);
+
+	count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
+				       MAX_APICS);
+	if (!count) { 
+		printk(KERN_ERR PREFIX "No LAPIC entries present\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return -ENODEV;
+	}
+	else if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+	return 0;
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+/*
+ * Parse IOAPIC related entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_ioapic_entries(void)
+{
+	int count;
+
+	/*
+	 * ACPI interpreter is required to complete interrupt setup,
+	 * so if it is off, don't enumerate the io-apics with ACPI.
+	 * If MPS is present, it will handle them,
+	 * otherwise the system will stay in PIC mode
+	 */
+	if (acpi_disabled || acpi_noirq) {
+		return -ENODEV;
+        }
+
+	/*
+ 	 * if "noapic" boot option, don't look for IO-APICs
+	 */
+	if (skip_ioapic_setup) {
+		printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
+			"due to 'noapic' option.\n");
+		return -ENODEV;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS);
+	if (!count) {
+		printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
+		return -ENODEV;
+	}
+	else if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
+		return count;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	/*
+	 * If BIOS did not supply an INT_SRC_OVR for the SCI
+	 * pretend we got one so we can set the SCI flags.
+	 */
+	if (!acpi_sci_override_gsi)
+		acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0);
+
+	/* Fill in identity legacy mapings where no override */
+	mp_config_acpi_legacy_irqs();
+
+	count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	return 0;
+}
+#else
+static inline int acpi_parse_madt_ioapic_entries(void)
+{
+	return -1;
+}
+#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */
+
+
+static void __init
+acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	int count, error;
+
+	count = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
+	if (count >= 1) {
+
+		/*
+		 * Parse MADT LAPIC entries
+		 */
+		error = acpi_parse_madt_lapic_entries();
+		if (!error) {
+			acpi_lapic = 1;
+
+			/*
+			 * Parse MADT IO-APIC entries
+			 */
+			error = acpi_parse_madt_ioapic_entries();
+			if (!error) {
+				acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
+				acpi_irq_balance_set(NULL);
+				acpi_ioapic = 1;
+
+				smp_found_config = 1;
+				clustered_apic_check();
+			}
+		}
+		if (error == -EINVAL) {
+			/*
+			 * Dell Precision Workstation 410, 610 come here.
+			 */
+			printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n");
+			disable_acpi();
+		}
+	}
+#endif
+	return;
+}
+
+/*
+ * acpi_boot_table_init() and acpi_boot_init()
+ *  called from setup_arch(), always.
+ *	1. checksums all tables
+ *	2. enumerates lapics
+ *	3. enumerates io-apics
+ *
+ * acpi_table_init() is separate to allow reading SRAT without
+ * other side effects.
+ *
+ * side effects of acpi_boot_init:
+ *	acpi_lapic = 1 if LAPIC found
+ *	acpi_ioapic = 1 if IOAPIC found
+ *	if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
+ *	if acpi_blacklisted() acpi_disabled = 1;
+ *	acpi_irq_model=...
+ *	...
+ *
+ * return value: (currently ignored)
+ *	0: success
+ *	!0: failure
+ */
+
+int __init
+acpi_boot_table_init(void)
+{
+	int error;
+
+	/*
+	 * If acpi_disabled, bail out
+	 * One exception: acpi=ht continues far enough to enumerate LAPICs
+	 */
+	if (acpi_disabled && !acpi_ht)
+		 return 1;
+
+	/* 
+	 * Initialize the ACPI boot-time table parser.
+	 */
+	error = acpi_table_init();
+	if (error) {
+		disable_acpi();
+		return error;
+	}
+
+#ifdef __i386__
+	check_acpi_pci();
+#endif
+
+	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+	/*
+	 * blacklist may disable ACPI entirely
+	 */
+	error = acpi_blacklisted();
+	if (error) {
+		extern int acpi_force;
+
+		if (acpi_force) {
+			printk(KERN_WARNING PREFIX "acpi=force override\n");
+		} else {
+			printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
+			disable_acpi();
+			return error;
+		}
+	}
+
+	return 0;
+}
+
+
+int __init acpi_boot_init(void)
+{
+	/*
+	 * If acpi_disabled, bail out
+	 * One exception: acpi=ht continues far enough to enumerate LAPICs
+	 */
+	if (acpi_disabled && !acpi_ht)
+		 return 1;
+
+	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+	/*
+	 * set sci_int and PM timer address
+	 */
+	acpi_table_parse(ACPI_FADT, acpi_parse_fadt);
+
+	/*
+	 * Process the Multiple APIC Description Table (MADT), if present
+	 */
+	acpi_process_madt();
+
+	acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
+	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+
+	return 0;
+}
+
diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c
new file mode 100644
index 000000000000..726a5ca4b165
--- /dev/null
+++ b/arch/i386/kernel/acpi/earlyquirk.c
@@ -0,0 +1,51 @@
+/* 
+ * Do early PCI probing for bug detection when the main PCI subsystem is 
+ * not up yet.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+#include <asm/acpi.h>
+
+static int __init check_bridge(int vendor, int device) 
+{
+	/* According to Nvidia all timer overrides are bogus. Just ignore
+	   them all. */
+	if (vendor == PCI_VENDOR_ID_NVIDIA) { 
+		acpi_skip_timer_override = 1; 		
+	}
+	return 0;
+}
+   
+void __init check_acpi_pci(void) 
+{ 
+	int num,slot,func; 
+
+	/* Assume the machine supports type 1. If not it will 
+	   always read ffffffff and should not have any side effect. */
+
+	/* Poor man's PCI discovery */
+	for (num = 0; num < 32; num++) { 
+		for (slot = 0; slot < 32; slot++) { 
+			for (func = 0; func < 8; func++) { 
+				u32 class;
+				u32 vendor;
+				class = read_pci_config(num,slot,func,
+							PCI_CLASS_REVISION);
+				if (class == 0xffffffff)
+					break; 
+
+				if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
+					continue; 
+				
+				vendor = read_pci_config(num, slot, func, 
+							 PCI_VENDOR_ID);
+				
+				if (check_bridge(vendor&0xffff, vendor >> 16))
+					return; 
+			} 
+			
+		}
+	}
+}
diff --git a/arch/i386/kernel/acpi/sleep.c b/arch/i386/kernel/acpi/sleep.c
new file mode 100644
index 000000000000..28bb0514bb6e
--- /dev/null
+++ b/arch/i386/kernel/acpi/sleep.c
@@ -0,0 +1,93 @@
+/*
+ * sleep.c - x86-specific ACPI sleep support.
+ *
+ *  Copyright (C) 2001-2003 Patrick Mochel
+ *  Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
+ */
+
+#include <linux/acpi.h>
+#include <linux/bootmem.h>
+#include <asm/smp.h>
+#include <asm/tlbflush.h>
+
+/* address in low memory of the wakeup routine. */
+unsigned long acpi_wakeup_address = 0;
+unsigned long acpi_video_flags;
+extern char wakeup_start, wakeup_end;
+
+extern void zap_low_mappings(void);
+
+extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long));
+
+static void init_low_mapping(pgd_t *pgd, int pgd_limit)
+{
+	int pgd_ofs = 0;
+
+	while ((pgd_ofs < pgd_limit) && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) {
+		set_pgd(pgd, *(pgd+USER_PTRS_PER_PGD));
+		pgd_ofs++, pgd++;
+	}
+	flush_tlb_all();
+}
+
+/**
+ * acpi_save_state_mem - save kernel state
+ *
+ * Create an identity mapped page table and copy the wakeup routine to
+ * low memory.
+ */
+int acpi_save_state_mem (void)
+{
+	if (!acpi_wakeup_address)
+		return 1;
+	init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD);
+	memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start);
+	acpi_copy_wakeup_routine(acpi_wakeup_address);
+
+	return 0;
+}
+
+/*
+ * acpi_restore_state - undo effects of acpi_save_state_mem
+ */
+void acpi_restore_state_mem (void)
+{
+	zap_low_mappings();
+}
+
+/**
+ * acpi_reserve_bootmem - do _very_ early ACPI initialisation
+ *
+ * We allocate a page from the first 1MB of memory for the wakeup
+ * routine for when we come back from a sleep state. The
+ * runtime allocator allows specification of <16MB pages, but not
+ * <1MB pages.
+ */
+void __init acpi_reserve_bootmem(void)
+{
+	if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) {
+		printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n");
+		return;
+	}
+
+	acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE);
+	if (!acpi_wakeup_address)
+		printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
+}
+
+static int __init acpi_sleep_setup(char *str)
+{
+	while ((str != NULL) && (*str != '\0')) {
+		if (strncmp(str, "s3_bios", 7) == 0)
+			acpi_video_flags = 1;
+		if (strncmp(str, "s3_mode", 7) == 0)
+			acpi_video_flags |= 2;
+		str = strchr(str, ',');
+		if (str != NULL)
+			str += strspn(str, ", \t");
+	}
+	return 1;
+}
+
+
+__setup("acpi_sleep=", acpi_sleep_setup);
diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S
new file mode 100644
index 000000000000..39d32484f6f5
--- /dev/null
+++ b/arch/i386/kernel/acpi/wakeup.S
@@ -0,0 +1,318 @@
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+
+#
+# wakeup_code runs in real mode, and at unknown address (determined at run-time).
+# Therefore it must only use relative jumps/calls. 
+#
+# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
+#
+# If physical address of wakeup_code is 0x12345, BIOS should call us with
+# cs = 0x1234, eip = 0x05
+# 
+
+ALIGN
+	.align	4096
+ENTRY(wakeup_start)
+wakeup_code:
+	wakeup_code_start = .
+	.code16
+
+ 	movw	$0xb800, %ax
+	movw	%ax,%fs
+	movw	$0x0e00 + 'L', %fs:(0x10)
+
+	cli
+	cld
+
+	# setup data segment
+	movw	%cs, %ax
+	movw	%ax, %ds					# Make ds:0 point to wakeup_start
+	movw	%ax, %ss
+	mov	$(wakeup_stack - wakeup_code), %sp		# Private stack is needed for ASUS board
+	movw	$0x0e00 + 'S', %fs:(0x12)
+
+	pushl	$0						# Kill any dangerous flags
+	popfl
+
+	movl	real_magic - wakeup_code, %eax
+	cmpl	$0x12345678, %eax
+	jne	bogus_real_magic
+
+	testl	$1, video_flags - wakeup_code
+	jz	1f
+	lcall   $0xc000,$3
+	movw	%cs, %ax
+	movw	%ax, %ds					# Bios might have played with that
+	movw	%ax, %ss
+1:
+
+	testl	$2, video_flags - wakeup_code
+	jz	1f
+	mov	video_mode - wakeup_code, %ax
+	call	mode_set
+1:
+
+	# set up page table
+	movl	$swapper_pg_dir-__PAGE_OFFSET, %eax
+	movl	%eax, %cr3
+
+	testl	$1, real_efer_save_restore - wakeup_code
+	jz	4f
+	# restore efer setting
+	movl	real_save_efer_edx - wakeup_code, %edx
+	movl	real_save_efer_eax - wakeup_code, %eax
+	mov     $0xc0000080, %ecx
+	wrmsr
+4:
+	# make sure %cr4 is set correctly (features, etc)
+	movl	real_save_cr4 - wakeup_code, %eax
+	movl	%eax, %cr4
+	movw	$0xb800, %ax
+	movw	%ax,%fs
+	movw	$0x0e00 + 'i', %fs:(0x12)
+	
+	# need a gdt
+	lgdt	real_save_gdt - wakeup_code
+
+	movl	real_save_cr0 - wakeup_code, %eax
+	movl	%eax, %cr0
+	jmp 1f
+1:
+	movw	$0x0e00 + 'n', %fs:(0x14)
+
+	movl	real_magic - wakeup_code, %eax
+	cmpl	$0x12345678, %eax
+	jne	bogus_real_magic
+
+	ljmpl	$__KERNEL_CS,$wakeup_pmode_return
+
+real_save_gdt:	.word 0
+		.long 0
+real_save_cr0:	.long 0
+real_save_cr3:	.long 0
+real_save_cr4:	.long 0
+real_magic:	.long 0
+video_mode:	.long 0
+video_flags:	.long 0
+real_efer_save_restore:	.long 0
+real_save_efer_edx: 	.long 0
+real_save_efer_eax: 	.long 0
+
+bogus_real_magic:
+	movw	$0x0e00 + 'B', %fs:(0x12)
+	jmp bogus_real_magic
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ *	NORMAL_VGA (-1)
+ *	EXTENDED_VGA (-2)
+ *	ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+# Setting of user mode (AX=mode ID) => CF=success
+mode_set:
+	movw	%ax, %bx
+#if 0
+	cmpb	$0xff, %ah
+	jz	setalias
+
+	testb	$VIDEO_RECALC>>8, %ah
+	jnz	_setrec
+
+	cmpb	$VIDEO_FIRST_RESOLUTION>>8, %ah
+	jnc	setres
+	
+	cmpb	$VIDEO_FIRST_SPECIAL>>8, %ah
+	jz	setspc
+
+	cmpb	$VIDEO_FIRST_V7>>8, %ah
+	jz	setv7
+#endif
+	
+	cmpb	$VIDEO_FIRST_VESA>>8, %ah
+	jnc	check_vesa
+#if 0	
+	orb	%ah, %ah
+	jz	setmenu
+#endif
+	
+	decb	%ah
+#	jz	setbios				  Add bios modes later
+
+setbad:	clc
+	ret
+
+check_vesa:
+	subb	$VIDEO_FIRST_VESA>>8, %bh
+	orw	$0x4000, %bx			# Use linear frame buffer
+	movw	$0x4f02, %ax			# VESA BIOS mode set call
+	int	$0x10
+	cmpw	$0x004f, %ax			# AL=4f if implemented
+	jnz	_setbad				# AH=0 if OK
+
+	stc
+	ret
+
+_setbad: jmp setbad
+
+	.code32
+	ALIGN
+
+.org	0x800
+wakeup_stack_begin:	# Stack grows down
+
+.org	0xff0		# Just below end of page
+wakeup_stack:
+ENTRY(wakeup_end)
+	
+.org	0x1000
+
+wakeup_pmode_return:
+	movw	$__KERNEL_DS, %ax
+	movw	%ax, %ss
+	movw	%ax, %ds
+	movw	%ax, %es
+	movw	%ax, %fs
+	movw	%ax, %gs
+	movw	$0x0e00 + 'u', 0xb8016
+
+	# reload the gdt, as we need the full 32 bit address
+	lgdt	saved_gdt
+	lidt	saved_idt
+	lldt	saved_ldt
+	ljmp	$(__KERNEL_CS),$1f
+1:
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+	wbinvd
+
+	# and restore the stack ... but you need gdt for this to work
+	movl	saved_context_esp, %esp
+
+	movl	%cs:saved_magic, %eax
+	cmpl	$0x12345678, %eax
+	jne	bogus_magic
+
+	# jump to place where we left off
+	movl	saved_eip,%eax
+	jmp	*%eax
+
+bogus_magic:
+	movw	$0x0e00 + 'B', 0xb8018
+	jmp	bogus_magic
+
+
+##
+# acpi_copy_wakeup_routine
+#
+# Copy the above routine to low memory.
+#
+# Parameters:
+# %eax:	place to copy wakeup routine to
+#
+# Returned address is location of code in low memory (past data and stack)
+#
+ENTRY(acpi_copy_wakeup_routine)
+
+	sgdt	saved_gdt
+	sidt	saved_idt
+	sldt	saved_ldt
+	str	saved_tss
+
+	movl	nx_enabled, %edx
+	movl	%edx, real_efer_save_restore - wakeup_start (%eax)
+	testl	$1, real_efer_save_restore - wakeup_start (%eax)
+	jz	2f
+	# save efer setting
+	pushl	%eax
+	movl	%eax, %ebx
+	mov     $0xc0000080, %ecx
+	rdmsr
+	movl	%edx, real_save_efer_edx - wakeup_start (%ebx)
+	movl	%eax, real_save_efer_eax - wakeup_start (%ebx)
+	popl	%eax
+2:
+
+	movl    %cr3, %edx
+	movl    %edx, real_save_cr3 - wakeup_start (%eax)
+	movl    %cr4, %edx
+	movl    %edx, real_save_cr4 - wakeup_start (%eax)
+	movl	%cr0, %edx
+	movl	%edx, real_save_cr0 - wakeup_start (%eax)
+	sgdt    real_save_gdt - wakeup_start (%eax)
+
+	movl	saved_videomode, %edx
+	movl	%edx, video_mode - wakeup_start (%eax)
+	movl	acpi_video_flags, %edx
+	movl	%edx, video_flags - wakeup_start (%eax)
+	movl	$0x12345678, real_magic - wakeup_start (%eax)
+	movl	$0x12345678, saved_magic
+	ret
+
+.data
+ALIGN
+ENTRY(saved_magic)	.long	0
+ENTRY(saved_eip)	.long	0
+
+save_registers:
+	leal	4(%esp), %eax
+	movl	%eax, saved_context_esp
+	movl %ebx, saved_context_ebx
+	movl %ebp, saved_context_ebp
+	movl %esi, saved_context_esi
+	movl %edi, saved_context_edi
+	pushfl ; popl saved_context_eflags
+
+	movl $ret_point, saved_eip
+	ret
+
+
+restore_registers:
+	movl saved_context_ebp, %ebp
+	movl saved_context_ebx, %ebx
+	movl saved_context_esi, %esi
+	movl saved_context_edi, %edi
+	pushl saved_context_eflags ; popfl
+	ret	
+
+ENTRY(do_suspend_lowlevel)
+	call	save_processor_state
+	call	save_registers
+	pushl	$3
+	call	acpi_enter_sleep_state
+	addl	$4, %esp
+	ret
+	.p2align 4,,7
+ret_point:
+	call	restore_registers
+	call	restore_processor_state
+	ret
+
+ENTRY(do_suspend_lowlevel_s4bios)
+	call save_processor_state
+	call save_registers
+	call acpi_enter_sleep_state_s4bios
+	ret
+
+ALIGN
+# saved registers
+saved_gdt:	.long	0,0
+saved_idt:	.long	0,0
+saved_ldt:	.long	0
+saved_tss:	.long	0
+
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
new file mode 100644
index 000000000000..35c1751ea0b0
--- /dev/null
+++ b/arch/i386/kernel/apic.c
@@ -0,0 +1,1278 @@
+/*
+ *	Local APIC handling, local APIC timers
+ *
+ *	(c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ *	Fixes
+ *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
+ *					thanks to Eric Gilmore
+ *					and Rolf G. Tews
+ *					for testing these extensively.
+ *	Maciej W. Rozycki	:	Various updates and fixes.
+ *	Mikael Pettersson	:	Power Management for UP-APIC.
+ *	Pavel Machek and
+ *	Mikael Pettersson	:	PM converted to driver model.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/desc.h>
+#include <asm/arch_hooks.h>
+#include <asm/hpet.h>
+
+#include <mach_apic.h>
+
+#include "io_ports.h"
+
+/*
+ * Debug level
+ */
+int apic_verbosity;
+
+
+static void apic_pm_activate(void);
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+	printk("unexpected IRQ trap at vector %02x\n", irq);
+	/*
+	 * Currently unexpected vectors happen only on SMP and APIC.
+	 * We _must_ ack these because every local APIC has only N
+	 * irq slots per priority level, and a 'hanging, unacked' IRQ
+	 * holds up an irq slot - in excessive cases (when multiple
+	 * unexpected vectors occur) that might lock up the APIC
+	 * completely.
+	 */
+	ack_APIC_irq();
+}
+
+void __init apic_intr_init(void)
+{
+#ifdef CONFIG_SMP
+	smp_intr_init();
+#endif
+	/* self generated IPI for local APIC timer */
+	set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+	/* IPI vectors for APIC spurious and error interrupts */
+	set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+	set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+	/* thermal monitor LVT interrupt */
+#ifdef CONFIG_X86_MCE_P4THERMAL
+	set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+}
+
+/* Using APIC to generate smp_local_timer_interrupt? */
+int using_apic_timer = 0;
+
+static DEFINE_PER_CPU(int, prof_multiplier) = 1;
+static DEFINE_PER_CPU(int, prof_old_multiplier) = 1;
+static DEFINE_PER_CPU(int, prof_counter) = 1;
+
+static int enabled_via_apicbase;
+
+void enable_NMI_through_LVT0 (void * dummy)
+{
+	unsigned int v, ver;
+
+	ver = apic_read(APIC_LVR);
+	ver = GET_APIC_VERSION(ver);
+	v = APIC_DM_NMI;			/* unmask and set to NMI */
+	if (!APIC_INTEGRATED(ver))		/* 82489DX */
+		v |= APIC_LVT_LEVEL_TRIGGER;
+	apic_write_around(APIC_LVT0, v);
+}
+
+int get_physical_broadcast(void)
+{
+	unsigned int lvr, version;
+	lvr = apic_read(APIC_LVR);
+	version = GET_APIC_VERSION(lvr);
+	if (!APIC_INTEGRATED(version) || version >= 0x14)
+		return 0xff;
+	else
+		return 0xf;
+}
+
+int get_maxlvt(void)
+{
+	unsigned int v, ver, maxlvt;
+
+	v = apic_read(APIC_LVR);
+	ver = GET_APIC_VERSION(v);
+	/* 82489DXs do not report # of LVT entries. */
+	maxlvt = APIC_INTEGRATED(ver) ? GET_APIC_MAXLVT(v) : 2;
+	return maxlvt;
+}
+
+void clear_local_APIC(void)
+{
+	int maxlvt;
+	unsigned long v;
+
+	maxlvt = get_maxlvt();
+
+	/*
+	 * Masking an LVT entry on a P6 can trigger a local APIC error
+	 * if the vector is zero. Mask LVTERR first to prevent this.
+	 */
+	if (maxlvt >= 3) {
+		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
+		apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
+	}
+	/*
+	 * Careful: we have to set masks only first to deassert
+	 * any level-triggered sources.
+	 */
+	v = apic_read(APIC_LVTT);
+	apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+	v = apic_read(APIC_LVT0);
+	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+	v = apic_read(APIC_LVT1);
+	apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
+	if (maxlvt >= 4) {
+		v = apic_read(APIC_LVTPC);
+		apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
+	}
+
+/* lets not touch this if we didn't frob it */
+#ifdef CONFIG_X86_MCE_P4THERMAL
+	if (maxlvt >= 5) {
+		v = apic_read(APIC_LVTTHMR);
+		apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+	}
+#endif
+	/*
+	 * Clean APIC state for other OSs:
+	 */
+	apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
+	apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
+	apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
+	if (maxlvt >= 3)
+		apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
+	if (maxlvt >= 4)
+		apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+	if (maxlvt >= 5)
+		apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
+#endif
+	v = GET_APIC_VERSION(apic_read(APIC_LVR));
+	if (APIC_INTEGRATED(v)) {	/* !82489DX */
+		if (maxlvt > 3)		/* Due to Pentium errata 3AP and 11AP. */
+			apic_write(APIC_ESR, 0);
+		apic_read(APIC_ESR);
+	}
+}
+
+void __init connect_bsp_APIC(void)
+{
+	if (pic_mode) {
+		/*
+		 * Do not trust the local APIC being empty at bootup.
+		 */
+		clear_local_APIC();
+		/*
+		 * PIC mode, enable APIC mode in the IMCR, i.e.
+		 * connect BSP's local APIC to INT and NMI lines.
+		 */
+		apic_printk(APIC_VERBOSE, "leaving PIC mode, "
+				"enabling APIC mode.\n");
+		outb(0x70, 0x22);
+		outb(0x01, 0x23);
+	}
+	enable_apic_mode();
+}
+
+void disconnect_bsp_APIC(void)
+{
+	if (pic_mode) {
+		/*
+		 * Put the board back into PIC mode (has an effect
+		 * only on certain older boards).  Note that APIC
+		 * interrupts, including IPIs, won't work beyond
+		 * this point!  The only exception are INIT IPIs.
+		 */
+		apic_printk(APIC_VERBOSE, "disabling APIC mode, "
+				"entering PIC mode.\n");
+		outb(0x70, 0x22);
+		outb(0x00, 0x23);
+	}
+}
+
+void disable_local_APIC(void)
+{
+	unsigned long value;
+
+	clear_local_APIC();
+
+	/*
+	 * Disable APIC (implies clearing of registers
+	 * for 82489DX!).
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_SPIV_APIC_ENABLED;
+	apic_write_around(APIC_SPIV, value);
+
+	if (enabled_via_apicbase) {
+		unsigned int l, h;
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		l &= ~MSR_IA32_APICBASE_ENABLE;
+		wrmsr(MSR_IA32_APICBASE, l, h);
+	}
+}
+
+/*
+ * This is to verify that we're looking at a real local APIC.
+ * Check these against your board if the CPUs aren't getting
+ * started for no apparent reason.
+ */
+int __init verify_local_APIC(void)
+{
+	unsigned int reg0, reg1;
+
+	/*
+	 * The version register is read-only in a real APIC.
+	 */
+	reg0 = apic_read(APIC_LVR);
+	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
+	apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
+	reg1 = apic_read(APIC_LVR);
+	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
+
+	/*
+	 * The two version reads above should print the same
+	 * numbers.  If the second one is different, then we
+	 * poke at a non-APIC.
+	 */
+	if (reg1 != reg0)
+		return 0;
+
+	/*
+	 * Check if the version looks reasonably.
+	 */
+	reg1 = GET_APIC_VERSION(reg0);
+	if (reg1 == 0x00 || reg1 == 0xff)
+		return 0;
+	reg1 = get_maxlvt();
+	if (reg1 < 0x02 || reg1 == 0xff)
+		return 0;
+
+	/*
+	 * The ID register is read/write in a real APIC.
+	 */
+	reg0 = apic_read(APIC_ID);
+	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
+
+	/*
+	 * The next two are just to see if we have sane values.
+	 * They're only really relevant if we're in Virtual Wire
+	 * compatibility mode, but most boxes are anymore.
+	 */
+	reg0 = apic_read(APIC_LVT0);
+	apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
+	reg1 = apic_read(APIC_LVT1);
+	apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
+
+	return 1;
+}
+
+void __init sync_Arb_IDs(void)
+{
+	/* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
+	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+	if (ver >= 0x14)	/* P4 or higher */
+		return;
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+
+	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
+	apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
+				| APIC_DM_INIT);
+}
+
+extern void __error_in_apic_c (void);
+
+/*
+ * An initial setup of the virtual wire mode.
+ */
+void __init init_bsp_APIC(void)
+{
+	unsigned long value, ver;
+
+	/*
+	 * Don't do the setup now if we have a SMP BIOS as the
+	 * through-I/O-APIC virtual wire mode might be active.
+	 */
+	if (smp_found_config || !cpu_has_apic)
+		return;
+
+	value = apic_read(APIC_LVR);
+	ver = GET_APIC_VERSION(value);
+
+	/*
+	 * Do not trust the local APIC being empty at bootup.
+	 */
+	clear_local_APIC();
+
+	/*
+	 * Enable APIC.
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	value |= APIC_SPIV_APIC_ENABLED;
+	
+	/* This bit is reserved on P4/Xeon and should be cleared */
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15))
+		value &= ~APIC_SPIV_FOCUS_DISABLED;
+	else
+		value |= APIC_SPIV_FOCUS_DISABLED;
+	value |= SPURIOUS_APIC_VECTOR;
+	apic_write_around(APIC_SPIV, value);
+
+	/*
+	 * Set up the virtual wire mode.
+	 */
+	apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+	value = APIC_DM_NMI;
+	if (!APIC_INTEGRATED(ver))		/* 82489DX */
+		value |= APIC_LVT_LEVEL_TRIGGER;
+	apic_write_around(APIC_LVT1, value);
+}
+
+void __init setup_local_APIC (void)
+{
+	unsigned long oldvalue, value, ver, maxlvt;
+
+	/* Pound the ESR really hard over the head with a big hammer - mbligh */
+	if (esr_disable) {
+		apic_write(APIC_ESR, 0);
+		apic_write(APIC_ESR, 0);
+		apic_write(APIC_ESR, 0);
+		apic_write(APIC_ESR, 0);
+	}
+
+	value = apic_read(APIC_LVR);
+	ver = GET_APIC_VERSION(value);
+
+	if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f)
+		__error_in_apic_c();
+
+	/*
+	 * Double-check whether this APIC is really registered.
+	 */
+	if (!apic_id_registered())
+		BUG();
+
+	/*
+	 * Intel recommends to set DFR, LDR and TPR before enabling
+	 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+	 * document number 292116).  So here it goes...
+	 */
+	init_apic_ldr();
+
+	/*
+	 * Set Task Priority to 'accept all'. We never change this
+	 * later on.
+	 */
+	value = apic_read(APIC_TASKPRI);
+	value &= ~APIC_TPRI_MASK;
+	apic_write_around(APIC_TASKPRI, value);
+
+	/*
+	 * Now that we are all set up, enable the APIC
+	 */
+	value = apic_read(APIC_SPIV);
+	value &= ~APIC_VECTOR_MASK;
+	/*
+	 * Enable APIC
+	 */
+	value |= APIC_SPIV_APIC_ENABLED;
+
+	/*
+	 * Some unknown Intel IO/APIC (or APIC) errata is biting us with
+	 * certain networking cards. If high frequency interrupts are
+	 * happening on a particular IOAPIC pin, plus the IOAPIC routing
+	 * entry is masked/unmasked at a high rate as well then sooner or
+	 * later IOAPIC line gets 'stuck', no more interrupts are received
+	 * from the device. If focus CPU is disabled then the hang goes
+	 * away, oh well :-(
+	 *
+	 * [ This bug can be reproduced easily with a level-triggered
+	 *   PCI Ne2000 networking cards and PII/PIII processors, dual
+	 *   BX chipset. ]
+	 */
+	/*
+	 * Actually disabling the focus CPU check just makes the hang less
+	 * frequent as it makes the interrupt distributon model be more
+	 * like LRU than MRU (the short-term load is more even across CPUs).
+	 * See also the comment in end_level_ioapic_irq().  --macro
+	 */
+#if 1
+	/* Enable focus processor (bit==0) */
+	value &= ~APIC_SPIV_FOCUS_DISABLED;
+#else
+	/* Disable focus processor (bit==1) */
+	value |= APIC_SPIV_FOCUS_DISABLED;
+#endif
+	/*
+	 * Set spurious IRQ vector
+	 */
+	value |= SPURIOUS_APIC_VECTOR;
+	apic_write_around(APIC_SPIV, value);
+
+	/*
+	 * Set up LVT0, LVT1:
+	 *
+	 * set up through-local-APIC on the BP's LINT0. This is not
+	 * strictly necessery in pure symmetric-IO mode, but sometimes
+	 * we delegate interrupts to the 8259A.
+	 */
+	/*
+	 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
+	 */
+	value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
+	if (!smp_processor_id() && (pic_mode || !value)) {
+		value = APIC_DM_EXTINT;
+		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
+				smp_processor_id());
+	} else {
+		value = APIC_DM_EXTINT | APIC_LVT_MASKED;
+		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
+				smp_processor_id());
+	}
+	apic_write_around(APIC_LVT0, value);
+
+	/*
+	 * only the BP should see the LINT1 NMI signal, obviously.
+	 */
+	if (!smp_processor_id())
+		value = APIC_DM_NMI;
+	else
+		value = APIC_DM_NMI | APIC_LVT_MASKED;
+	if (!APIC_INTEGRATED(ver))		/* 82489DX */
+		value |= APIC_LVT_LEVEL_TRIGGER;
+	apic_write_around(APIC_LVT1, value);
+
+	if (APIC_INTEGRATED(ver) && !esr_disable) {		/* !82489DX */
+		maxlvt = get_maxlvt();
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
+			apic_write(APIC_ESR, 0);
+		oldvalue = apic_read(APIC_ESR);
+
+		value = ERROR_APIC_VECTOR;      // enables sending errors
+		apic_write_around(APIC_LVTERR, value);
+		/*
+		 * spec says clear errors after enabling vector.
+		 */
+		if (maxlvt > 3)
+			apic_write(APIC_ESR, 0);
+		value = apic_read(APIC_ESR);
+		if (value != oldvalue)
+			apic_printk(APIC_VERBOSE, "ESR value before enabling "
+				"vector: 0x%08lx  after: 0x%08lx\n",
+				oldvalue, value);
+	} else {
+		if (esr_disable)	
+			/* 
+			 * Something untraceble is creating bad interrupts on 
+			 * secondary quads ... for the moment, just leave the
+			 * ESR disabled - we can't do anything useful with the
+			 * errors anyway - mbligh
+			 */
+			printk("Leaving ESR disabled.\n");
+		else 
+			printk("No ESR for 82489DX.\n");
+	}
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		setup_apic_nmi_watchdog();
+	apic_pm_activate();
+}
+
+/*
+ * If Linux enabled the LAPIC against the BIOS default
+ * disable it down before re-entering the BIOS on shutdown.
+ * Otherwise the BIOS may get confused and not power-off.
+ */
+void lapic_shutdown(void)
+{
+	if (!cpu_has_apic || !enabled_via_apicbase)
+		return;
+
+	local_irq_disable();
+	disable_local_APIC();
+	local_irq_enable();
+}
+
+#ifdef CONFIG_PM
+
+static struct {
+	int active;
+	/* r/w apic fields */
+	unsigned int apic_id;
+	unsigned int apic_taskpri;
+	unsigned int apic_ldr;
+	unsigned int apic_dfr;
+	unsigned int apic_spiv;
+	unsigned int apic_lvtt;
+	unsigned int apic_lvtpc;
+	unsigned int apic_lvt0;
+	unsigned int apic_lvt1;
+	unsigned int apic_lvterr;
+	unsigned int apic_tmict;
+	unsigned int apic_tdcr;
+	unsigned int apic_thmr;
+} apic_pm_state;
+
+static int lapic_suspend(struct sys_device *dev, u32 state)
+{
+	unsigned long flags;
+
+	if (!apic_pm_state.active)
+		return 0;
+
+	apic_pm_state.apic_id = apic_read(APIC_ID);
+	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
+	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
+	apic_pm_state.apic_dfr = apic_read(APIC_DFR);
+	apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
+	apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
+	apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
+	apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
+	apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
+	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
+	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
+	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
+	apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
+	
+	local_irq_save(flags);
+	disable_local_APIC();
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int lapic_resume(struct sys_device *dev)
+{
+	unsigned int l, h;
+	unsigned long flags;
+
+	if (!apic_pm_state.active)
+		return 0;
+
+	local_irq_save(flags);
+
+	/*
+	 * Make sure the APICBASE points to the right address
+	 *
+	 * FIXME! This will be wrong if we ever support suspend on
+	 * SMP! We'll need to do this as part of the CPU restore!
+	 */
+	rdmsr(MSR_IA32_APICBASE, l, h);
+	l &= ~MSR_IA32_APICBASE_BASE;
+	l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+	wrmsr(MSR_IA32_APICBASE, l, h);
+
+	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
+	apic_write(APIC_ID, apic_pm_state.apic_id);
+	apic_write(APIC_DFR, apic_pm_state.apic_dfr);
+	apic_write(APIC_LDR, apic_pm_state.apic_ldr);
+	apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
+	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
+	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
+	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
+	apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
+	apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
+	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
+	apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
+	apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
+	apic_write(APIC_ESR, 0);
+	apic_read(APIC_ESR);
+	apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
+	apic_write(APIC_ESR, 0);
+	apic_read(APIC_ESR);
+	local_irq_restore(flags);
+	return 0;
+}
+
+/*
+ * This device has no shutdown method - fully functioning local APICs
+ * are needed on every CPU up until machine_halt/restart/poweroff.
+ */
+
+static struct sysdev_class lapic_sysclass = {
+	set_kset_name("lapic"),
+	.resume		= lapic_resume,
+	.suspend	= lapic_suspend,
+};
+
+static struct sys_device device_lapic = {
+	.id	= 0,
+	.cls	= &lapic_sysclass,
+};
+
+static void __init apic_pm_activate(void)
+{
+	apic_pm_state.active = 1;
+}
+
+static int __init init_lapic_sysfs(void)
+{
+	int error;
+
+	if (!cpu_has_apic)
+		return 0;
+	/* XXX: remove suspend/resume procs if !apic_pm_state.active? */
+
+	error = sysdev_class_register(&lapic_sysclass);
+	if (!error)
+		error = sysdev_register(&device_lapic);
+	return error;
+}
+device_initcall(init_lapic_sysfs);
+
+#else	/* CONFIG_PM */
+
+static void apic_pm_activate(void) { }
+
+#endif	/* CONFIG_PM */
+
+/*
+ * Detect and enable local APICs on non-SMP boards.
+ * Original code written by Keir Fraser.
+ */
+
+/*
+ * Knob to control our willingness to enable the local APIC.
+ */
+int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
+
+static int __init lapic_disable(char *str)
+{
+	enable_local_apic = -1;
+	clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+	return 0;
+}
+__setup("nolapic", lapic_disable);
+
+static int __init lapic_enable(char *str)
+{
+	enable_local_apic = 1;
+	return 0;
+}
+__setup("lapic", lapic_enable);
+
+static int __init apic_set_verbosity(char *str)
+{
+	if (strcmp("debug", str) == 0)
+		apic_verbosity = APIC_DEBUG;
+	else if (strcmp("verbose", str) == 0)
+		apic_verbosity = APIC_VERBOSE;
+	else
+		printk(KERN_WARNING "APIC Verbosity level %s not recognised"
+				" use apic=verbose or apic=debug", str);
+
+	return 0;
+}
+
+__setup("apic=", apic_set_verbosity);
+
+static int __init detect_init_APIC (void)
+{
+	u32 h, l, features;
+	extern void get_cpu_vendor(struct cpuinfo_x86*);
+
+	/* Disabled by kernel option? */
+	if (enable_local_apic < 0)
+		return -1;
+
+	/* Workaround for us being called before identify_cpu(). */
+	get_cpu_vendor(&boot_cpu_data);
+
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
+		    (boot_cpu_data.x86 == 15))	    
+			break;
+		goto no_apic;
+	case X86_VENDOR_INTEL:
+		if (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15 ||
+		    (boot_cpu_data.x86 == 5 && cpu_has_apic))
+			break;
+		goto no_apic;
+	default:
+		goto no_apic;
+	}
+
+	if (!cpu_has_apic) {
+		/*
+		 * Over-ride BIOS and try to enable the local
+		 * APIC only if "lapic" specified.
+		 */
+		if (enable_local_apic <= 0) {
+			printk("Local APIC disabled by BIOS -- "
+			       "you can enable it with \"lapic\"\n");
+			return -1;
+		}
+		/*
+		 * Some BIOSes disable the local APIC in the
+		 * APIC_BASE MSR. This can only be done in
+		 * software for Intel P6 or later and AMD K7
+		 * (Model > 1) or later.
+		 */
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+			printk("Local APIC disabled by BIOS -- reenabling.\n");
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+			enabled_via_apicbase = 1;
+		}
+	}
+	/*
+	 * The APIC feature bit should now be enabled
+	 * in `cpuid'
+	 */
+	features = cpuid_edx(1);
+	if (!(features & (1 << X86_FEATURE_APIC))) {
+		printk("Could not enable APIC!\n");
+		return -1;
+	}
+	set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	/* The BIOS may have set up the APIC at some other address */
+	rdmsr(MSR_IA32_APICBASE, l, h);
+	if (l & MSR_IA32_APICBASE_ENABLE)
+		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+
+	if (nmi_watchdog != NMI_NONE)
+		nmi_watchdog = NMI_LOCAL_APIC;
+
+	printk("Found and enabled local APIC!\n");
+
+	apic_pm_activate();
+
+	return 0;
+
+no_apic:
+	printk("No local APIC present or hardware disabled\n");
+	return -1;
+}
+
+void __init init_apic_mappings(void)
+{
+	unsigned long apic_phys;
+
+	/*
+	 * If no local APIC can be found then set up a fake all
+	 * zeroes page to simulate the local APIC and another
+	 * one for the IO-APIC.
+	 */
+	if (!smp_found_config && detect_init_APIC()) {
+		apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
+		apic_phys = __pa(apic_phys);
+	} else
+		apic_phys = mp_lapic_addr;
+
+	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+	printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE,
+	       apic_phys);
+
+	/*
+	 * Fetch the APIC ID of the BSP in case we have a
+	 * default configuration (or the MP table is broken).
+	 */
+	if (boot_cpu_physical_apicid == -1U)
+		boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+
+#ifdef CONFIG_X86_IO_APIC
+	{
+		unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
+		int i;
+
+		for (i = 0; i < nr_ioapics; i++) {
+			if (smp_found_config) {
+				ioapic_phys = mp_ioapics[i].mpc_apicaddr;
+				if (!ioapic_phys) {
+					printk(KERN_ERR
+					       "WARNING: bogus zero IO-APIC "
+					       "address found in MPTABLE, "
+					       "disabling IO/APIC support!\n");
+					smp_found_config = 0;
+					skip_ioapic_setup = 1;
+					goto fake_ioapic_page;
+				}
+			} else {
+fake_ioapic_page:
+				ioapic_phys = (unsigned long)
+					      alloc_bootmem_pages(PAGE_SIZE);
+				ioapic_phys = __pa(ioapic_phys);
+			}
+			set_fixmap_nocache(idx, ioapic_phys);
+			printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
+			       __fix_to_virt(idx), ioapic_phys);
+			idx++;
+		}
+	}
+#endif
+}
+
+/*
+ * This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts
+ * per second. We assume that the caller has already set up the local
+ * APIC.
+ *
+ * The APIC timer is not exactly sync with the external timer chip, it
+ * closely follows bus clocks.
+ */
+
+/*
+ * The timer chip is already set up at HZ interrupts per second here,
+ * but we do not accept timer interrupts yet. We only allow the BP
+ * to calibrate.
+ */
+static unsigned int __init get_8254_timer_count(void)
+{
+	extern spinlock_t i8253_lock;
+	unsigned long flags;
+
+	unsigned int count;
+
+	spin_lock_irqsave(&i8253_lock, flags);
+
+	outb_p(0x00, PIT_MODE);
+	count = inb_p(PIT_CH0);
+	count |= inb_p(PIT_CH0) << 8;
+
+	spin_unlock_irqrestore(&i8253_lock, flags);
+
+	return count;
+}
+
+/* next tick in 8254 can be caught by catching timer wraparound */
+static void __init wait_8254_wraparound(void)
+{
+	unsigned int curr_count, prev_count;
+
+	curr_count = get_8254_timer_count();
+	do {
+		prev_count = curr_count;
+		curr_count = get_8254_timer_count();
+
+		/* workaround for broken Mercury/Neptune */
+		if (prev_count >= curr_count + 0x100)
+			curr_count = get_8254_timer_count();
+
+	} while (prev_count >= curr_count);
+}
+
+/*
+ * Default initialization for 8254 timers. If we use other timers like HPET,
+ * we override this later
+ */
+void (*wait_timer_tick)(void) __initdata = wait_8254_wraparound;
+
+/*
+ * This function sets up the local APIC timer, with a timeout of
+ * 'clocks' APIC bus clock. During calibration we actually call
+ * this function twice on the boot CPU, once with a bogus timeout
+ * value, second time for real. The other (noncalibrating) CPUs
+ * call this function only once, with the real, calibrated value.
+ *
+ * We do reads before writes even if unnecessary, to get around the
+ * P5 APIC double write bug.
+ */
+
+#define APIC_DIVISOR 16
+
+static void __setup_APIC_LVTT(unsigned int clocks)
+{
+	unsigned int lvtt_value, tmp_value, ver;
+
+	ver = GET_APIC_VERSION(apic_read(APIC_LVR));
+	lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR;
+	if (!APIC_INTEGRATED(ver))
+		lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
+	apic_write_around(APIC_LVTT, lvtt_value);
+
+	/*
+	 * Divide PICLK by 16
+	 */
+	tmp_value = apic_read(APIC_TDCR);
+	apic_write_around(APIC_TDCR, (tmp_value
+				& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
+				| APIC_TDR_DIV_16);
+
+	apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
+}
+
+static void __init setup_APIC_timer(unsigned int clocks)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/*
+	 * Wait for IRQ0's slice:
+	 */
+	wait_timer_tick();
+
+	__setup_APIC_LVTT(clocks);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * In this function we calibrate APIC bus clocks to the external
+ * timer. Unfortunately we cannot use jiffies and the timer irq
+ * to calibrate, since some later bootup code depends on getting
+ * the first irq? Ugh.
+ *
+ * We want to do the calibration only once since we
+ * want to have local timer irqs syncron. CPUs connected
+ * by the same APIC bus have the very same bus frequency.
+ * And we want to have irqs off anyways, no accidental
+ * APIC irq that way.
+ */
+
+static int __init calibrate_APIC_clock(void)
+{
+	unsigned long long t1 = 0, t2 = 0;
+	long tt1, tt2;
+	long result;
+	int i;
+	const int LOOPS = HZ/10;
+
+	apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n");
+
+	/*
+	 * Put whatever arbitrary (but long enough) timeout
+	 * value into the APIC clock, we just want to get the
+	 * counter running for calibration.
+	 */
+	__setup_APIC_LVTT(1000000000);
+
+	/*
+	 * The timer chip counts down to zero. Let's wait
+	 * for a wraparound to start exact measurement:
+	 * (the current tick might have been already half done)
+	 */
+
+	wait_timer_tick();
+
+	/*
+	 * We wrapped around just now. Let's start:
+	 */
+	if (cpu_has_tsc)
+		rdtscll(t1);
+	tt1 = apic_read(APIC_TMCCT);
+
+	/*
+	 * Let's wait LOOPS wraprounds:
+	 */
+	for (i = 0; i < LOOPS; i++)
+		wait_timer_tick();
+
+	tt2 = apic_read(APIC_TMCCT);
+	if (cpu_has_tsc)
+		rdtscll(t2);
+
+	/*
+	 * The APIC bus clock counter is 32 bits only, it
+	 * might have overflown, but note that we use signed
+	 * longs, thus no extra care needed.
+	 *
+	 * underflown to be exact, as the timer counts down ;)
+	 */
+
+	result = (tt1-tt2)*APIC_DIVISOR/LOOPS;
+
+	if (cpu_has_tsc)
+		apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
+			"%ld.%04ld MHz.\n",
+			((long)(t2-t1)/LOOPS)/(1000000/HZ),
+			((long)(t2-t1)/LOOPS)%(1000000/HZ));
+
+	apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
+		"%ld.%04ld MHz.\n",
+		result/(1000000/HZ),
+		result%(1000000/HZ));
+
+	return result;
+}
+
+static unsigned int calibration_result;
+
+void __init setup_boot_APIC_clock(void)
+{
+	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
+	using_apic_timer = 1;
+
+	local_irq_disable();
+
+	calibration_result = calibrate_APIC_clock();
+	/*
+	 * Now set up the timer for real.
+	 */
+	setup_APIC_timer(calibration_result);
+
+	local_irq_enable();
+}
+
+void __init setup_secondary_APIC_clock(void)
+{
+	setup_APIC_timer(calibration_result);
+}
+
+void __init disable_APIC_timer(void)
+{
+	if (using_apic_timer) {
+		unsigned long v;
+
+		v = apic_read(APIC_LVTT);
+		apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+	}
+}
+
+void enable_APIC_timer(void)
+{
+	if (using_apic_timer) {
+		unsigned long v;
+
+		v = apic_read(APIC_LVTT);
+		apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED);
+	}
+}
+
+/*
+ * the frequency of the profiling timer can be changed
+ * by writing a multiplier value into /proc/profile.
+ */
+int setup_profiling_timer(unsigned int multiplier)
+{
+	int i;
+
+	/*
+	 * Sanity check. [at least 500 APIC cycles should be
+	 * between APIC interrupts as a rule of thumb, to avoid
+	 * irqs flooding us]
+	 */
+	if ( (!multiplier) || (calibration_result/multiplier < 500))
+		return -EINVAL;
+
+	/* 
+	 * Set the new multiplier for each CPU. CPUs don't start using the
+	 * new values until the next timer interrupt in which they do process
+	 * accounting. At that time they also adjust their APIC timers
+	 * accordingly.
+	 */
+	for (i = 0; i < NR_CPUS; ++i)
+		per_cpu(prof_multiplier, i) = multiplier;
+
+	return 0;
+}
+
+#undef APIC_DIVISOR
+
+/*
+ * Local timer interrupt handler. It does both profiling and
+ * process statistics/rescheduling.
+ *
+ * We do profiling in every local tick, statistics/rescheduling
+ * happen only every 'profiling multiplier' ticks. The default
+ * multiplier is 1 and it can be changed by writing the new multiplier
+ * value into /proc/profile.
+ */
+
+inline void smp_local_timer_interrupt(struct pt_regs * regs)
+{
+	int cpu = smp_processor_id();
+
+	profile_tick(CPU_PROFILING, regs);
+	if (--per_cpu(prof_counter, cpu) <= 0) {
+		/*
+		 * The multiplier may have changed since the last time we got
+		 * to this point as a result of the user writing to
+		 * /proc/profile. In this case we need to adjust the APIC
+		 * timer accordingly.
+		 *
+		 * Interrupts are already masked off at this point.
+		 */
+		per_cpu(prof_counter, cpu) = per_cpu(prof_multiplier, cpu);
+		if (per_cpu(prof_counter, cpu) !=
+					per_cpu(prof_old_multiplier, cpu)) {
+			__setup_APIC_LVTT(
+					calibration_result/
+					per_cpu(prof_counter, cpu));
+			per_cpu(prof_old_multiplier, cpu) =
+						per_cpu(prof_counter, cpu);
+		}
+
+#ifdef CONFIG_SMP
+		update_process_times(user_mode(regs));
+#endif
+	}
+
+	/*
+	 * We take the 'long' return path, and there every subsystem
+	 * grabs the apropriate locks (kernel lock/ irq lock).
+	 *
+	 * we might want to decouple profiling from the 'long path',
+	 * and do the profiling totally in assembly.
+	 *
+	 * Currently this isn't too much of an issue (performance wise),
+	 * we can take more than 100K local irqs per second on a 100 MHz P5.
+	 */
+}
+
+/*
+ * Local APIC timer interrupt. This is the most natural way for doing
+ * local interrupts, but local timer interrupts can be emulated by
+ * broadcast interrupts too. [in case the hw doesn't support APIC timers]
+ *
+ * [ if a single-CPU system runs an SMP kernel then we call the local
+ *   interrupt as well. Thus we cannot inline the local irq ... ]
+ */
+
+fastcall void smp_apic_timer_interrupt(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+
+	/*
+	 * the NMI deadlock-detector uses this.
+	 */
+	per_cpu(irq_stat, cpu).apic_timer_irqs++;
+
+	/*
+	 * NOTE! We'd better ACK the irq immediately,
+	 * because timer handling can be slow.
+	 */
+	ack_APIC_irq();
+	/*
+	 * update_process_times() expects us to have done irq_enter().
+	 * Besides, if we don't timer interrupts ignore the global
+	 * interrupt lock, which is the WrongThing (tm) to do.
+	 */
+	irq_enter();
+	smp_local_timer_interrupt(regs);
+	irq_exit();
+}
+
+/*
+ * This interrupt should _never_ happen with our APIC/SMP architecture
+ */
+fastcall void smp_spurious_interrupt(struct pt_regs *regs)
+{
+	unsigned long v;
+
+	irq_enter();
+	/*
+	 * Check if this really is a spurious interrupt and ACK it
+	 * if it is a vectored one.  Just in case...
+	 * Spurious interrupts should not be ACKed.
+	 */
+	v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
+	if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
+		ack_APIC_irq();
+
+	/* see sw-dev-man vol 3, chapter 7.4.13.5 */
+	printk(KERN_INFO "spurious APIC interrupt on CPU#%d, should never happen.\n",
+			smp_processor_id());
+	irq_exit();
+}
+
+/*
+ * This interrupt should never happen with our APIC/SMP architecture
+ */
+
+fastcall void smp_error_interrupt(struct pt_regs *regs)
+{
+	unsigned long v, v1;
+
+	irq_enter();
+	/* First tickle the hardware, only then report what went on. -- REW */
+	v = apic_read(APIC_ESR);
+	apic_write(APIC_ESR, 0);
+	v1 = apic_read(APIC_ESR);
+	ack_APIC_irq();
+	atomic_inc(&irq_err_count);
+
+	/* Here is what the APIC error bits mean:
+	   0: Send CS error
+	   1: Receive CS error
+	   2: Send accept error
+	   3: Receive accept error
+	   4: Reserved
+	   5: Send illegal vector
+	   6: Received illegal vector
+	   7: Illegal register address
+	*/
+	printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
+	        smp_processor_id(), v , v1);
+	irq_exit();
+}
+
+/*
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
+ */
+int __init APIC_init_uniprocessor (void)
+{
+	if (enable_local_apic < 0)
+		clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+
+	if (!smp_found_config && !cpu_has_apic)
+		return -1;
+
+	/*
+	 * Complain if the BIOS pretends there is one.
+	 */
+	if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
+			boot_cpu_physical_apicid);
+		return -1;
+	}
+
+	verify_local_APIC();
+
+	connect_bsp_APIC();
+
+	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+
+	setup_local_APIC();
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		check_nmi_watchdog();
+#ifdef CONFIG_X86_IO_APIC
+	if (smp_found_config)
+		if (!skip_ioapic_setup && nr_ioapics)
+			setup_IO_APIC();
+#endif
+	setup_boot_APIC_clock();
+
+	return 0;
+}
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
new file mode 100644
index 000000000000..45641a872550
--- /dev/null
+++ b/arch/i386/kernel/apm.c
@@ -0,0 +1,2428 @@
+/* -*- linux-c -*-
+ * APM BIOS driver for Linux
+ * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
+ *
+ * Initial development of this driver was funded by NEC Australia P/L
+ *	and NEC Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * October 1995, Rik Faith (faith@cs.unc.edu):
+ *    Minor enhancements and updates (to the patch set) for 1.3.x
+ *    Documentation
+ * January 1996, Rik Faith (faith@cs.unc.edu):
+ *    Make /proc/apm easy to format (bump driver version)
+ * March 1996, Rik Faith (faith@cs.unc.edu):
+ *    Prohibit APM BIOS calls unless apm_enabled.
+ *    (Thanks to Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>)
+ * April 1996, Stephen Rothwell (sfr@canb.auug.org.au)
+ *    Version 1.0 and 1.1
+ * May 1996, Version 1.2
+ * Feb 1998, Version 1.3
+ * Feb 1998, Version 1.4
+ * Aug 1998, Version 1.5
+ * Sep 1998, Version 1.6
+ * Nov 1998, Version 1.7
+ * Jan 1999, Version 1.8
+ * Jan 1999, Version 1.9
+ * Oct 1999, Version 1.10
+ * Nov 1999, Version 1.11
+ * Jan 2000, Version 1.12
+ * Feb 2000, Version 1.13
+ * Nov 2000, Version 1.14
+ * Oct 2001, Version 1.15
+ * Jan 2002, Version 1.16
+ * Oct 2002, Version 1.16ac
+ *
+ * History:
+ *    0.6b: first version in official kernel, Linux 1.3.46
+ *    0.7: changed /proc/apm format, Linux 1.3.58
+ *    0.8: fixed gcc 2.7.[12] compilation problems, Linux 1.3.59
+ *    0.9: only call bios if bios is present, Linux 1.3.72
+ *    1.0: use fixed device number, consolidate /proc/apm into this file,
+ *         Linux 1.3.85
+ *    1.1: support user-space standby and suspend, power off after system
+ *         halted, Linux 1.3.98
+ *    1.2: When resetting RTC after resume, take care so that the time
+ *         is only incorrect by 30-60mS (vs. 1S previously) (Gabor J. Toth
+ *         <jtoth@princeton.edu>); improve interaction between
+ *         screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4
+ *    1.2a:Simple change to stop mysterious bug reports with SMP also added
+ *	   levels to the printk calls. APM is not defined for SMP machines.
+ *         The new replacment for it is, but Linux doesn't yet support this.
+ *         Alan Cox Linux 2.1.55
+ *    1.3: Set up a valid data descriptor 0x40 for buggy BIOS's
+ *    1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by
+ *         Dean Gaudet <dgaudet@arctic.org>.
+ *         C. Scott Ananian <cananian@alumni.princeton.edu> Linux 2.1.87
+ *    1.5: Fix segment register reloading (in case of bad segments saved
+ *         across BIOS call).
+ *         Stephen Rothwell
+ *    1.6: Cope with complier/assembler differences.
+ *         Only try to turn off the first display device.
+ *         Fix OOPS at power off with no APM BIOS by Jan Echternach
+ *                   <echter@informatik.uni-rostock.de>
+ *         Stephen Rothwell
+ *    1.7: Modify driver's cached copy of the disabled/disengaged flags
+ *         to reflect current state of APM BIOS.
+ *         Chris Rankin <rankinc@bellsouth.net>
+ *         Reset interrupt 0 timer to 100Hz after suspend
+ *         Chad Miller <cmiller@surfsouth.com>
+ *         Add CONFIG_APM_IGNORE_SUSPEND_BOUNCE
+ *         Richard Gooch <rgooch@atnf.csiro.au>
+ *         Allow boot time disabling of APM
+ *         Make boot messages far less verbose by default
+ *         Make asm safer
+ *         Stephen Rothwell
+ *    1.8: Add CONFIG_APM_RTC_IS_GMT
+ *         Richard Gooch <rgooch@atnf.csiro.au>
+ *         change APM_NOINTS to CONFIG_APM_ALLOW_INTS
+ *         remove dependency on CONFIG_PROC_FS
+ *         Stephen Rothwell
+ *    1.9: Fix small typo.  <laslo@wodip.opole.pl>
+ *         Try to cope with BIOS's that need to have all display
+ *         devices blanked and not just the first one.
+ *         Ross Paterson <ross@soi.city.ac.uk>
+ *         Fix segment limit setting it has always been wrong as
+ *         the segments needed to have byte granularity.
+ *         Mark a few things __init.
+ *         Add hack to allow power off of SMP systems by popular request.
+ *         Use CONFIG_SMP instead of __SMP__
+ *         Ignore BOUNCES for three seconds.
+ *         Stephen Rothwell
+ *   1.10: Fix for Thinkpad return code.
+ *         Merge 2.2 and 2.3 drivers.
+ *         Remove APM dependencies in arch/i386/kernel/process.c
+ *         Remove APM dependencies in drivers/char/sysrq.c
+ *         Reset time across standby.
+ *         Allow more inititialisation on SMP.
+ *         Remove CONFIG_APM_POWER_OFF and make it boot time
+ *         configurable (default on).
+ *         Make debug only a boot time parameter (remove APM_DEBUG).
+ *         Try to blank all devices on any error.
+ *   1.11: Remove APM dependencies in drivers/char/console.c
+ *         Check nr_running to detect if we are idle (from
+ *         Borislav Deianov <borislav@lix.polytechnique.fr>)
+ *         Fix for bioses that don't zero the top part of the
+ *         entrypoint offset (Mario Sitta <sitta@al.unipmn.it>)
+ *         (reported by Panos Katsaloulis <teras@writeme.com>).
+ *         Real mode power off patch (Walter Hofmann
+ *         <Walter.Hofmann@physik.stud.uni-erlangen.de>).
+ *   1.12: Remove CONFIG_SMP as the compiler will optimize
+ *         the code away anyway (smp_num_cpus == 1 in UP)
+ *         noted by Artur Skawina <skawina@geocities.com>.
+ *         Make power off under SMP work again.
+ *         Fix thinko with initial engaging of BIOS.
+ *         Make sure power off only happens on CPU 0
+ *         (Paul "Rusty" Russell <rusty@rustcorp.com.au>).
+ *         Do error notification to user mode if BIOS calls fail.
+ *         Move entrypoint offset fix to ...boot/setup.S
+ *         where it belongs (Cosmos <gis88564@cis.nctu.edu.tw>).
+ *         Remove smp-power-off. SMP users must now specify
+ *         "apm=power-off" on the kernel command line. Suggested
+ *         by Jim Avera <jima@hal.com>, modified by Alan Cox
+ *         <alan@lxorguk.ukuu.org.uk>.
+ *         Register the /proc/apm entry even on SMP so that
+ *         scripts that check for it before doing power off
+ *         work (Jim Avera <jima@hal.com>).
+ *   1.13: Changes for new pm_ interfaces (Andy Henroid
+ *         <andy_henroid@yahoo.com>).
+ *         Modularize the code.
+ *         Fix the Thinkpad (again) :-( (CONFIG_APM_IGNORE_MULTIPLE_SUSPENDS
+ *         is now the way life works).
+ *         Fix thinko in suspend() (wrong return).
+ *         Notify drivers on critical suspend.
+ *         Make kapmd absorb more idle time (Pavel Machek <pavel@suse.cz>
+ *         modified by sfr).
+ *         Disable interrupts while we are suspended (Andy Henroid
+ *         <andy_henroid@yahoo.com> fixed by sfr).
+ *         Make power off work on SMP again (Tony Hoyle
+ *         <tmh@magenta-logic.com> and <zlatko@iskon.hr>) modified by sfr.
+ *         Remove CONFIG_APM_SUSPEND_BOUNCE.  The bounce ignore
+ *         interval is now configurable.
+ *   1.14: Make connection version persist across module unload/load.
+ *         Enable and engage power management earlier.
+ *         Disengage power management on module unload.
+ *         Changed to use the sysrq-register hack for registering the
+ *         power off function called by magic sysrq based upon discussions
+ *         in irc://irc.openprojects.net/#kernelnewbies
+ *         (Crutcher Dunnavant <crutcher+kernel@datastacks.com>).
+ *         Make CONFIG_APM_REAL_MODE_POWER_OFF run time configurable.
+ *         (Arjan van de Ven <arjanv@redhat.com>) modified by sfr.
+ *         Work around byte swap bug in one of the Vaio's BIOS's
+ *         (Marc Boucher <marc@mbsi.ca>).
+ *         Exposed the disable flag to dmi so that we can handle known
+ *         broken APM (Alan Cox <alan@redhat.com>).
+ *   1.14ac: If the BIOS says "I slowed the CPU down" then don't spin
+ *         calling it - instead idle. (Alan Cox <alan@redhat.com>)
+ *         If an APM idle fails log it and idle sensibly
+ *   1.15: Don't queue events to clients who open the device O_WRONLY.
+ *         Don't expect replies from clients who open the device O_RDONLY.
+ *         (Idea from Thomas Hood)
+ *         Minor waitqueue cleanups. (John Fremlin <chief@bandits.org>)
+ *   1.16: Fix idle calling. (Andreas Steinmetz <ast@domdv.de> et al.)
+ *         Notify listeners of standby or suspend events before notifying
+ *         drivers. Return EBUSY to ioctl() if suspend is rejected.
+ *         (Russell King <rmk@arm.linux.org.uk> and Thomas Hood)
+ *         Ignore first resume after we generate our own resume event
+ *         after a suspend (Thomas Hood)
+ *         Daemonize now gets rid of our controlling terminal (sfr).
+ *         CONFIG_APM_CPU_IDLE now just affects the default value of
+ *         idle_threshold (sfr).
+ *         Change name of kernel apm daemon (as it no longer idles) (sfr).
+ *   1.16ac: Fix up SMP support somewhat. You can now force SMP on and we
+ *	   make _all_ APM calls on the CPU#0. Fix unsafe sign bug.
+ *	   TODO: determine if its "boot CPU" or "CPU0" we want to lock to.
+ *
+ * APM 1.1 Reference:
+ *
+ *   Intel Corporation, Microsoft Corporation. Advanced Power Management
+ *   (APM) BIOS Interface Specification, Revision 1.1, September 1993.
+ *   Intel Order Number 241704-001.  Microsoft Part Number 781-110-X01.
+ *
+ * [This document is available free from Intel by calling 800.628.8686 (fax
+ * 916.356.6100) or 800.548.4725; or via anonymous ftp from
+ * ftp://ftp.intel.com/pub/IAL/software_specs/apmv11.doc.  It is also
+ * available from Microsoft by calling 206.882.8080.]
+ *
+ * APM 1.2 Reference:
+ *   Intel Corporation, Microsoft Corporation. Advanced Power Management
+ *   (APM) BIOS Interface Specification, Revision 1.2, February 1996.
+ *
+ * [This document is available from Microsoft at:
+ *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/poll.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/timer.h>
+#include <linux/fcntl.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/proc_fs.h>
+#include <linux/miscdevice.h>
+#include <linux/apm_bios.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/dmi.h>
+#include <linux/suspend.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/desc.h>
+
+#include "io_ports.h"
+
+extern spinlock_t i8253_lock;
+extern unsigned long get_cmos_time(void);
+extern void machine_real_restart(unsigned char *, int);
+
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+extern int (*console_blank_hook)(int);
+#endif
+
+/*
+ * The apm_bios device is one of the misc char devices.
+ * This is its minor number.
+ */
+#define	APM_MINOR_DEV	134
+
+/*
+ * See Documentation/Config.help for the configuration options.
+ *
+ * Various options can be changed at boot time as follows:
+ * (We allow underscores for compatibility with the modules code)
+ *	apm=on/off			enable/disable APM
+ *	    [no-]allow[-_]ints		allow interrupts during BIOS calls
+ *	    [no-]broken[-_]psr		BIOS has a broken GetPowerStatus call
+ *	    [no-]realmode[-_]power[-_]off	switch to real mode before
+ *	    					powering off
+ *	    [no-]debug			log some debugging messages
+ *	    [no-]power[-_]off		power off on shutdown
+ *	    [no-]smp			Use apm even on an SMP box
+ *	    bounce[-_]interval=<n>	number of ticks to ignore suspend
+ *	    				bounces
+ *          idle[-_]threshold=<n>       System idle percentage above which to
+ *                                      make APM BIOS idle calls. Set it to
+ *                                      100 to disable.
+ *          idle[-_]period=<n>          Period (in 1/100s of a second) over
+ *                                      which the idle percentage is
+ *                                      calculated.
+ */
+
+/* KNOWN PROBLEM MACHINES:
+ *
+ * U: TI 4000M TravelMate: BIOS is *NOT* APM compliant
+ *                         [Confirmed by TI representative]
+ * ?: ACER 486DX4/75: uses dseg 0040, in violation of APM specification
+ *                    [Confirmed by BIOS disassembly]
+ *                    [This may work now ...]
+ * P: Toshiba 1950S: battery life information only gets updated after resume
+ * P: Midwest Micro Soundbook Elite DX2/66 monochrome: screen blanking
+ * 	broken in BIOS [Reported by Garst R. Reese <reese@isn.net>]
+ * ?: AcerNote-950: oops on reading /proc/apm - workaround is a WIP
+ * 	Neale Banks <neale@lowendale.com.au> December 2000
+ *
+ * Legend: U = unusable with APM patches
+ *         P = partially usable with APM patches
+ */
+
+/*
+ * Define as 1 to make the driver always call the APM BIOS busy
+ * routine even if the clock was not reported as slowed by the
+ * idle routine.  Otherwise, define as 0.
+ */
+#define ALWAYS_CALL_BUSY   1
+
+/*
+ * Define to make the APM BIOS calls zero all data segment registers (so
+ * that an incorrect BIOS implementation will cause a kernel panic if it
+ * tries to write to arbitrary memory).
+ */
+#define APM_ZERO_SEGS
+
+#include "apm.h"
+
+/*
+ * Define to make all _set_limit calls use 64k limits.  The APM 1.1 BIOS is
+ * supposed to provide limit information that it recognizes.  Many machines
+ * do this correctly, but many others do not restrict themselves to their
+ * claimed limit.  When this happens, they will cause a segmentation
+ * violation in the kernel at boot time.  Most BIOS's, however, will
+ * respect a 64k limit, so we use that.  If you want to be pedantic and
+ * hold your BIOS to its claims, then undefine this.
+ */
+#define APM_RELAX_SEGMENTS
+
+/*
+ * Define to re-initialize the interrupt 0 timer to 100 Hz after a suspend.
+ * This patched by Chad Miller <cmiller@surfsouth.com>, original code by
+ * David Chen <chen@ctpa04.mit.edu>
+ */
+#undef INIT_TIMER_AFTER_SUSPEND
+
+#ifdef INIT_TIMER_AFTER_SUSPEND
+#include <linux/timex.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#endif
+
+/*
+ * Need to poll the APM BIOS every second
+ */
+#define APM_CHECK_TIMEOUT	(HZ)
+
+/*
+ * Ignore suspend events for this amount of time after a resume
+ */
+#define DEFAULT_BOUNCE_INTERVAL		(3 * HZ)
+
+/*
+ * Maximum number of events stored
+ */
+#define APM_MAX_EVENTS		20
+
+/*
+ * The per-file APM data
+ */
+struct apm_user {
+	int		magic;
+	struct apm_user *	next;
+	int		suser: 1;
+	int		writer: 1;
+	int		reader: 1;
+	int		suspend_wait: 1;
+	int		suspend_result;
+	int		suspends_pending;
+	int		standbys_pending;
+	int		suspends_read;
+	int		standbys_read;
+	int		event_head;
+	int		event_tail;
+	apm_event_t	events[APM_MAX_EVENTS];
+};
+
+/*
+ * The magic number in apm_user
+ */
+#define APM_BIOS_MAGIC		0x4101
+
+/*
+ * idle percentage above which bios idle calls are done
+ */
+#ifdef CONFIG_APM_CPU_IDLE
+#define DEFAULT_IDLE_THRESHOLD	95
+#else
+#define DEFAULT_IDLE_THRESHOLD	100
+#endif
+#define DEFAULT_IDLE_PERIOD	(100 / 3)
+
+/*
+ * Local variables
+ */
+static struct {
+	unsigned long	offset;
+	unsigned short	segment;
+}				apm_bios_entry;
+static int			clock_slowed;
+static int			idle_threshold = DEFAULT_IDLE_THRESHOLD;
+static int			idle_period = DEFAULT_IDLE_PERIOD;
+static int			set_pm_idle;
+static int			suspends_pending;
+static int			standbys_pending;
+static int			ignore_sys_suspend;
+static int			ignore_normal_resume;
+static int			bounce_interval = DEFAULT_BOUNCE_INTERVAL;
+
+#ifdef CONFIG_APM_RTC_IS_GMT
+#	define	clock_cmos_diff	0
+#	define	got_clock_diff	1
+#else
+static long			clock_cmos_diff;
+static int			got_clock_diff;
+#endif
+static int			debug;
+static int			smp;
+static int			apm_disabled = -1;
+#ifdef CONFIG_SMP
+static int			power_off;
+#else
+static int			power_off = 1;
+#endif
+#ifdef CONFIG_APM_REAL_MODE_POWER_OFF
+static int			realmode_power_off = 1;
+#else
+static int			realmode_power_off;
+#endif
+static int			exit_kapmd;
+static int			kapmd_running;
+#ifdef CONFIG_APM_ALLOW_INTS
+static int			allow_ints = 1;
+#else
+static int			allow_ints;
+#endif
+static int			broken_psr;
+
+static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
+static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
+static struct apm_user *	user_list;
+static DEFINE_SPINLOCK(user_list_lock);
+static struct desc_struct	bad_bios_desc = { 0, 0x00409200 };
+
+static char			driver_version[] = "1.16ac";	/* no spaces */
+
+/*
+ *	APM event names taken from the APM 1.2 specification. These are
+ *	the message codes that the BIOS uses to tell us about events
+ */
+static char *	apm_event_name[] = {
+	"system standby",
+	"system suspend",
+	"normal resume",
+	"critical resume",
+	"low battery",
+	"power status change",
+	"update time",
+	"critical suspend",
+	"user standby",
+	"user suspend",
+	"system standby resume",
+	"capabilities change"
+};
+#define NR_APM_EVENT_NAME	\
+		(sizeof(apm_event_name) / sizeof(apm_event_name[0]))
+
+typedef struct lookup_t {
+	int	key;
+	char *	msg;
+} lookup_t;
+
+/*
+ *	The BIOS returns a set of standard error codes in AX when the
+ *	carry flag is set.
+ */
+ 
+static const lookup_t error_table[] = {
+/* N/A	{ APM_SUCCESS,		"Operation succeeded" }, */
+	{ APM_DISABLED,		"Power management disabled" },
+	{ APM_CONNECTED,	"Real mode interface already connected" },
+	{ APM_NOT_CONNECTED,	"Interface not connected" },
+	{ APM_16_CONNECTED,	"16 bit interface already connected" },
+/* N/A	{ APM_16_UNSUPPORTED,	"16 bit interface not supported" }, */
+	{ APM_32_CONNECTED,	"32 bit interface already connected" },
+	{ APM_32_UNSUPPORTED,	"32 bit interface not supported" },
+	{ APM_BAD_DEVICE,	"Unrecognized device ID" },
+	{ APM_BAD_PARAM,	"Parameter out of range" },
+	{ APM_NOT_ENGAGED,	"Interface not engaged" },
+	{ APM_BAD_FUNCTION,     "Function not supported" },
+	{ APM_RESUME_DISABLED,	"Resume timer disabled" },
+	{ APM_BAD_STATE,	"Unable to enter requested state" },
+/* N/A	{ APM_NO_EVENTS,	"No events pending" }, */
+	{ APM_NO_ERROR,		"BIOS did not set a return code" },
+	{ APM_NOT_PRESENT,	"No APM present" }
+};
+#define ERROR_COUNT	(sizeof(error_table)/sizeof(lookup_t))
+
+/**
+ *	apm_error	-	display an APM error
+ *	@str: information string
+ *	@err: APM BIOS return code
+ *
+ *	Write a meaningful log entry to the kernel log in the event of
+ *	an APM error.
+ */
+ 
+static void apm_error(char *str, int err)
+{
+	int	i;
+
+	for (i = 0; i < ERROR_COUNT; i++)
+		if (error_table[i].key == err) break;
+	if (i < ERROR_COUNT)
+		printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg);
+	else
+		printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n",
+			str, err);
+}
+
+/*
+ * Lock APM functionality to physical CPU 0
+ */
+ 
+#ifdef CONFIG_SMP
+
+static cpumask_t apm_save_cpus(void)
+{
+	cpumask_t x = current->cpus_allowed;
+	/* Some bioses don't like being called from CPU != 0 */
+	set_cpus_allowed(current, cpumask_of_cpu(0));
+	BUG_ON(smp_processor_id() != 0);
+	return x;
+}
+
+static inline void apm_restore_cpus(cpumask_t mask)
+{
+	set_cpus_allowed(current, mask);
+}
+
+#else
+
+/*
+ *	No CPU lockdown needed on a uniprocessor
+ */
+ 
+#define apm_save_cpus()		(current->cpus_allowed)
+#define apm_restore_cpus(x)	(void)(x)
+
+#endif
+
+/*
+ * These are the actual BIOS calls.  Depending on APM_ZERO_SEGS and
+ * apm_info.allow_ints, we are being really paranoid here!  Not only
+ * are interrupts disabled, but all the segment registers (except SS)
+ * are saved and zeroed this means that if the BIOS tries to reference
+ * any data without explicitly loading the segment registers, the kernel
+ * will fault immediately rather than have some unforeseen circumstances
+ * for the rest of the kernel.  And it will be very obvious!  :-) Doing
+ * this depends on CS referring to the same physical memory as DS so that
+ * DS can be zeroed before the call. Unfortunately, we can't do anything
+ * about the stack segment/pointer.  Also, we tell the compiler that
+ * everything could change.
+ *
+ * Also, we KNOW that for the non error case of apm_bios_call, there
+ * is no useful data returned in the low order 8 bits of eax.
+ */
+#define APM_DO_CLI	\
+	if (apm_info.allow_ints) \
+		local_irq_enable(); \
+	else \
+		local_irq_disable();
+
+#ifdef APM_ZERO_SEGS
+#	define APM_DECL_SEGS \
+		unsigned int saved_fs; unsigned int saved_gs;
+#	define APM_DO_SAVE_SEGS \
+		savesegment(fs, saved_fs); savesegment(gs, saved_gs)
+#	define APM_DO_RESTORE_SEGS \
+		loadsegment(fs, saved_fs); loadsegment(gs, saved_gs)
+#else
+#	define APM_DECL_SEGS
+#	define APM_DO_SAVE_SEGS
+#	define APM_DO_RESTORE_SEGS
+#endif
+
+/**
+ *	apm_bios_call	-	Make an APM BIOS 32bit call
+ *	@func: APM function to execute
+ *	@ebx_in: EBX register for call entry
+ *	@ecx_in: ECX register for call entry
+ *	@eax: EAX register return
+ *	@ebx: EBX register return
+ *	@ecx: ECX register return
+ *	@edx: EDX register return
+ *	@esi: ESI register return
+ *
+ *	Make an APM call using the 32bit protected mode interface. The
+ *	caller is responsible for knowing if APM BIOS is configured and
+ *	enabled. This call can disable interrupts for a long period of
+ *	time on some laptops.  The return value is in AH and the carry
+ *	flag is loaded into AL.  If there is an error, then the error
+ *	code is returned in AH (bits 8-15 of eax) and this function
+ *	returns non-zero.
+ */
+ 
+static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
+	u32 *eax, u32 *ebx, u32 *ecx, u32 *edx, u32 *esi)
+{
+	APM_DECL_SEGS
+	unsigned long		flags;
+	cpumask_t		cpus;
+	int			cpu;
+	struct desc_struct	save_desc_40;
+
+	cpus = apm_save_cpus();
+	
+	cpu = get_cpu();
+	save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
+	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+
+	local_save_flags(flags);
+	APM_DO_CLI;
+	APM_DO_SAVE_SEGS;
+	apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi);
+	APM_DO_RESTORE_SEGS;
+	local_irq_restore(flags);
+	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = save_desc_40;
+	put_cpu();
+	apm_restore_cpus(cpus);
+	
+	return *eax & 0xff;
+}
+
+/**
+ *	apm_bios_call_simple	-	make a simple APM BIOS 32bit call
+ *	@func: APM function to invoke
+ *	@ebx_in: EBX register value for BIOS call
+ *	@ecx_in: ECX register value for BIOS call
+ *	@eax: EAX register on return from the BIOS call
+ *
+ *	Make a BIOS call that does only returns one value, or just status.
+ *	If there is an error, then the error code is returned in AH
+ *	(bits 8-15 of eax) and this function returns non-zero. This is
+ *	used for simpler BIOS operations. This call may hold interrupts
+ *	off for a long time on some laptops.
+ */
+
+static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
+{
+	u8			error;
+	APM_DECL_SEGS
+	unsigned long		flags;
+	cpumask_t		cpus;
+	int			cpu;
+	struct desc_struct	save_desc_40;
+
+
+	cpus = apm_save_cpus();
+	
+	cpu = get_cpu();
+	save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
+	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+
+	local_save_flags(flags);
+	APM_DO_CLI;
+	APM_DO_SAVE_SEGS;
+	error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax);
+	APM_DO_RESTORE_SEGS;
+	local_irq_restore(flags);
+	__get_cpu_var(cpu_gdt_table)[0x40 / 8] = save_desc_40;
+	put_cpu();
+	apm_restore_cpus(cpus);
+	return error;
+}
+
+/**
+ *	apm_driver_version	-	APM driver version
+ *	@val:	loaded with the APM version on return
+ *
+ *	Retrieve the APM version supported by the BIOS. This is only
+ *	supported for APM 1.1 or higher. An error indicates APM 1.0 is
+ *	probably present.
+ *
+ *	On entry val should point to a value indicating the APM driver
+ *	version with the high byte being the major and the low byte the
+ *	minor number both in BCD
+ *
+ *	On return it will hold the BIOS revision supported in the
+ *	same format.
+ */
+
+static int apm_driver_version(u_short *val)
+{
+	u32	eax;
+
+	if (apm_bios_call_simple(APM_FUNC_VERSION, 0, *val, &eax))
+		return (eax >> 8) & 0xff;
+	*val = eax;
+	return APM_SUCCESS;
+}
+
+/**
+ *	apm_get_event	-	get an APM event from the BIOS
+ *	@event: pointer to the event
+ *	@info: point to the event information
+ *
+ *	The APM BIOS provides a polled information for event
+ *	reporting. The BIOS expects to be polled at least every second
+ *	when events are pending. When a message is found the caller should
+ *	poll until no more messages are present.  However, this causes
+ *	problems on some laptops where a suspend event notification is
+ *	not cleared until it is acknowledged.
+ *
+ *	Additional information is returned in the info pointer, providing
+ *	that APM 1.2 is in use. If no messges are pending the value 0x80
+ *	is returned (No power management events pending).
+ */
+ 
+static int apm_get_event(apm_event_t *event, apm_eventinfo_t *info)
+{
+	u32	eax;
+	u32	ebx;
+	u32	ecx;
+	u32	dummy;
+
+	if (apm_bios_call(APM_FUNC_GET_EVENT, 0, 0, &eax, &ebx, &ecx,
+			&dummy, &dummy))
+		return (eax >> 8) & 0xff;
+	*event = ebx;
+	if (apm_info.connection_version < 0x0102)
+		*info = ~0; /* indicate info not valid */
+	else
+		*info = ecx;
+	return APM_SUCCESS;
+}
+
+/**
+ *	set_power_state	-	set the power management state
+ *	@what: which items to transition
+ *	@state: state to transition to
+ *
+ *	Request an APM change of state for one or more system devices. The
+ *	processor state must be transitioned last of all. what holds the
+ *	class of device in the upper byte and the device number (0xFF for
+ *	all) for the object to be transitioned.
+ *
+ *	The state holds the state to transition to, which may in fact
+ *	be an acceptance of a BIOS requested state change.
+ */
+ 
+static int set_power_state(u_short what, u_short state)
+{
+	u32	eax;
+
+	if (apm_bios_call_simple(APM_FUNC_SET_STATE, what, state, &eax))
+		return (eax >> 8) & 0xff;
+	return APM_SUCCESS;
+}
+
+/**
+ *	set_system_power_state - set system wide power state
+ *	@state: which state to enter
+ *
+ *	Transition the entire system into a new APM power state.
+ */
+ 
+static int set_system_power_state(u_short state)
+{
+	return set_power_state(APM_DEVICE_ALL, state);
+}
+
+/**
+ *	apm_do_idle	-	perform power saving
+ *
+ *	This function notifies the BIOS that the processor is (in the view
+ *	of the OS) idle. It returns -1 in the event that the BIOS refuses
+ *	to handle the idle request. On a success the function returns 1
+ *	if the BIOS did clock slowing or 0 otherwise.
+ */
+ 
+static int apm_do_idle(void)
+{
+	u32	eax;
+
+	if (apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax)) {
+		static unsigned long t;
+
+		/* This always fails on some SMP boards running UP kernels.
+		 * Only report the failure the first 5 times.
+		 */
+		if (++t < 5)
+		{
+			printk(KERN_DEBUG "apm_do_idle failed (%d)\n",
+					(eax >> 8) & 0xff);
+			t = jiffies;
+		}
+		return -1;
+	}
+	clock_slowed = (apm_info.bios.flags & APM_IDLE_SLOWS_CLOCK) != 0;
+	return clock_slowed;
+}
+
+/**
+ *	apm_do_busy	-	inform the BIOS the CPU is busy
+ *
+ *	Request that the BIOS brings the CPU back to full performance. 
+ */
+ 
+static void apm_do_busy(void)
+{
+	u32	dummy;
+
+	if (clock_slowed || ALWAYS_CALL_BUSY) {
+		(void) apm_bios_call_simple(APM_FUNC_BUSY, 0, 0, &dummy);
+		clock_slowed = 0;
+	}
+}
+
+/*
+ * If no process has really been interested in
+ * the CPU for some time, we want to call BIOS
+ * power management - we probably want
+ * to conserve power.
+ */
+#define IDLE_CALC_LIMIT   (HZ * 100)
+#define IDLE_LEAKY_MAX    16
+
+static void (*original_pm_idle)(void);
+
+extern void default_idle(void);
+
+/**
+ * apm_cpu_idle		-	cpu idling for APM capable Linux
+ *
+ * This is the idling function the kernel executes when APM is available. It 
+ * tries to do BIOS powermanagement based on the average system idle time.
+ * Furthermore it calls the system default idle routine.
+ */
+
+static void apm_cpu_idle(void)
+{
+	static int use_apm_idle; /* = 0 */
+	static unsigned int last_jiffies; /* = 0 */
+	static unsigned int last_stime; /* = 0 */
+
+	int apm_idle_done = 0;
+	unsigned int jiffies_since_last_check = jiffies - last_jiffies;
+	unsigned int bucket;
+
+recalc:
+	if (jiffies_since_last_check > IDLE_CALC_LIMIT) {
+		use_apm_idle = 0;
+		last_jiffies = jiffies;
+		last_stime = current->stime;
+	} else if (jiffies_since_last_check > idle_period) {
+		unsigned int idle_percentage;
+
+		idle_percentage = current->stime - last_stime;
+		idle_percentage *= 100;
+		idle_percentage /= jiffies_since_last_check;
+		use_apm_idle = (idle_percentage > idle_threshold);
+		if (apm_info.forbid_idle)
+			use_apm_idle = 0;
+		last_jiffies = jiffies;
+		last_stime = current->stime;
+	}
+
+	bucket = IDLE_LEAKY_MAX;
+
+	while (!need_resched()) {
+		if (use_apm_idle) {
+			unsigned int t;
+
+			t = jiffies;
+			switch (apm_do_idle()) {
+			case 0: apm_idle_done = 1;
+				if (t != jiffies) {
+					if (bucket) {
+						bucket = IDLE_LEAKY_MAX;
+						continue;
+					}
+				} else if (bucket) {
+					bucket--;
+					continue;
+				}
+				break;
+			case 1: apm_idle_done = 1;
+				break;
+			default: /* BIOS refused */
+				break;
+			}
+		}
+		if (original_pm_idle)
+			original_pm_idle();
+		else
+			default_idle();
+		jiffies_since_last_check = jiffies - last_jiffies;
+		if (jiffies_since_last_check > idle_period)
+			goto recalc;
+	}
+
+	if (apm_idle_done)
+		apm_do_busy();
+}
+
+/**
+ *	apm_power_off	-	ask the BIOS to power off
+ *
+ *	Handle the power off sequence. This is the one piece of code we
+ *	will execute even on SMP machines. In order to deal with BIOS
+ *	bugs we support real mode APM BIOS power off calls. We also make
+ *	the SMP call on CPU0 as some systems will only honour this call
+ *	on their first cpu.
+ */
+ 
+static void apm_power_off(void)
+{
+	unsigned char	po_bios_call[] = {
+		0xb8, 0x00, 0x10,	/* movw  $0x1000,ax  */
+		0x8e, 0xd0,		/* movw  ax,ss       */
+		0xbc, 0x00, 0xf0,	/* movw  $0xf000,sp  */
+		0xb8, 0x07, 0x53,	/* movw  $0x5307,ax  */
+		0xbb, 0x01, 0x00,	/* movw  $0x0001,bx  */
+		0xb9, 0x03, 0x00,	/* movw  $0x0003,cx  */
+		0xcd, 0x15		/* int   $0x15       */
+	};
+
+	/*
+	 * This may be called on an SMP machine.
+	 */
+#ifdef CONFIG_SMP
+	/* Some bioses don't like being called from CPU != 0 */
+	set_cpus_allowed(current, cpumask_of_cpu(0));
+	BUG_ON(smp_processor_id() != 0);
+#endif
+	if (apm_info.realmode_power_off)
+	{
+		(void)apm_save_cpus();
+		machine_real_restart(po_bios_call, sizeof(po_bios_call));
+	}
+	else
+		(void) set_system_power_state(APM_STATE_OFF);
+}
+
+#ifdef CONFIG_APM_DO_ENABLE
+
+/**
+ *	apm_enable_power_management - enable BIOS APM power management
+ *	@enable: enable yes/no
+ *
+ *	Enable or disable the APM BIOS power services. 
+ */
+ 
+static int apm_enable_power_management(int enable)
+{
+	u32	eax;
+
+	if ((enable == 0) && (apm_info.bios.flags & APM_BIOS_DISENGAGED))
+		return APM_NOT_ENGAGED;
+	if (apm_bios_call_simple(APM_FUNC_ENABLE_PM, APM_DEVICE_BALL,
+			enable, &eax))
+		return (eax >> 8) & 0xff;
+	if (enable)
+		apm_info.bios.flags &= ~APM_BIOS_DISABLED;
+	else
+		apm_info.bios.flags |= APM_BIOS_DISABLED;
+	return APM_SUCCESS;
+}
+#endif
+
+/**
+ *	apm_get_power_status	-	get current power state
+ *	@status: returned status
+ *	@bat: battery info
+ *	@life: estimated life
+ *
+ *	Obtain the current power status from the APM BIOS. We return a
+ *	status which gives the rough battery status, and current power
+ *	source. The bat value returned give an estimate as a percentage
+ *	of life and a status value for the battery. The estimated life
+ *	if reported is a lifetime in secodnds/minutes at current powwer
+ *	consumption.
+ */
+ 
+static int apm_get_power_status(u_short *status, u_short *bat, u_short *life)
+{
+	u32	eax;
+	u32	ebx;
+	u32	ecx;
+	u32	edx;
+	u32	dummy;
+
+	if (apm_info.get_power_status_broken)
+		return APM_32_UNSUPPORTED;
+	if (apm_bios_call(APM_FUNC_GET_STATUS, APM_DEVICE_ALL, 0,
+			&eax, &ebx, &ecx, &edx, &dummy))
+		return (eax >> 8) & 0xff;
+	*status = ebx;
+	*bat = ecx;
+	if (apm_info.get_power_status_swabinminutes) {
+		*life = swab16((u16)edx);
+		*life |= 0x8000;
+	} else
+		*life = edx;
+	return APM_SUCCESS;
+}
+
+#if 0
+static int apm_get_battery_status(u_short which, u_short *status,
+				  u_short *bat, u_short *life, u_short *nbat)
+{
+	u32	eax;
+	u32	ebx;
+	u32	ecx;
+	u32	edx;
+	u32	esi;
+
+	if (apm_info.connection_version < 0x0102) {
+		/* pretend we only have one battery. */
+		if (which != 1)
+			return APM_BAD_DEVICE;
+		*nbat = 1;
+		return apm_get_power_status(status, bat, life);
+	}
+
+	if (apm_bios_call(APM_FUNC_GET_STATUS, (0x8000 | (which)), 0, &eax,
+			&ebx, &ecx, &edx, &esi))
+		return (eax >> 8) & 0xff;
+	*status = ebx;
+	*bat = ecx;
+	*life = edx;
+	*nbat = esi;
+	return APM_SUCCESS;
+}
+#endif
+
+/**
+ *	apm_engage_power_management	-	enable PM on a device
+ *	@device: identity of device
+ *	@enable: on/off
+ *
+ *	Activate or deactive power management on either a specific device
+ *	or the entire system (%APM_DEVICE_ALL).
+ */
+ 
+static int apm_engage_power_management(u_short device, int enable)
+{
+	u32	eax;
+
+	if ((enable == 0) && (device == APM_DEVICE_ALL)
+	    && (apm_info.bios.flags & APM_BIOS_DISABLED))
+		return APM_DISABLED;
+	if (apm_bios_call_simple(APM_FUNC_ENGAGE_PM, device, enable, &eax))
+		return (eax >> 8) & 0xff;
+	if (device == APM_DEVICE_ALL) {
+		if (enable)
+			apm_info.bios.flags &= ~APM_BIOS_DISENGAGED;
+		else
+			apm_info.bios.flags |= APM_BIOS_DISENGAGED;
+	}
+	return APM_SUCCESS;
+}
+
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+
+/**
+ *	apm_console_blank	-	blank the display
+ *	@blank: on/off
+ *
+ *	Attempt to blank the console, firstly by blanking just video device
+ *	zero, and if that fails (some BIOSes don't support it) then it blanks
+ *	all video devices. Typically the BIOS will do laptop backlight and
+ *	monitor powerdown for us.
+ */
+ 
+static int apm_console_blank(int blank)
+{
+	int	error;
+	u_short	state;
+
+	state = blank ? APM_STATE_STANDBY : APM_STATE_READY;
+	/* Blank the first display device */
+	error = set_power_state(0x100, state);
+	if ((error != APM_SUCCESS) && (error != APM_NO_ERROR)) {
+		/* try to blank them all instead */
+		error = set_power_state(0x1ff, state);
+		if ((error != APM_SUCCESS) && (error != APM_NO_ERROR))
+			/* try to blank device one instead */
+			error = set_power_state(0x101, state);
+	}
+	if ((error == APM_SUCCESS) || (error == APM_NO_ERROR))
+		return 1;
+	if (error == APM_NOT_ENGAGED) {
+		static int tried;
+		int eng_error;
+		if (tried++ == 0) {
+			eng_error = apm_engage_power_management(APM_DEVICE_ALL, 1);
+			if (eng_error) {
+				apm_error("set display", error);
+				apm_error("engage interface", eng_error);
+				return 0;
+			} else
+				return apm_console_blank(blank);
+		}
+	}
+	apm_error("set display", error);
+	return 0;
+}
+#endif
+
+static int queue_empty(struct apm_user *as)
+{
+	return as->event_head == as->event_tail;
+}
+
+static apm_event_t get_queued_event(struct apm_user *as)
+{
+	as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS;
+	return as->events[as->event_tail];
+}
+
+static void queue_event(apm_event_t event, struct apm_user *sender)
+{
+	struct apm_user *	as;
+
+	spin_lock(&user_list_lock);
+	if (user_list == NULL)
+		goto out;
+	for (as = user_list; as != NULL; as = as->next) {
+		if ((as == sender) || (!as->reader))
+			continue;
+		as->event_head = (as->event_head + 1) % APM_MAX_EVENTS;
+		if (as->event_head == as->event_tail) {
+			static int notified;
+
+			if (notified++ == 0)
+			    printk(KERN_ERR "apm: an event queue overflowed\n");
+			as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS;
+		}
+		as->events[as->event_head] = event;
+		if ((!as->suser) || (!as->writer))
+			continue;
+		switch (event) {
+		case APM_SYS_SUSPEND:
+		case APM_USER_SUSPEND:
+			as->suspends_pending++;
+			suspends_pending++;
+			break;
+
+		case APM_SYS_STANDBY:
+		case APM_USER_STANDBY:
+			as->standbys_pending++;
+			standbys_pending++;
+			break;
+		}
+	}
+	wake_up_interruptible(&apm_waitqueue);
+out:
+	spin_unlock(&user_list_lock);
+}
+
+static void set_time(void)
+{
+	if (got_clock_diff) {	/* Must know time zone in order to set clock */
+		xtime.tv_sec = get_cmos_time() + clock_cmos_diff;
+		xtime.tv_nsec = 0; 
+	} 
+}
+
+static void get_time_diff(void)
+{
+#ifndef CONFIG_APM_RTC_IS_GMT
+	/*
+	 * Estimate time zone so that set_time can update the clock
+	 */
+	clock_cmos_diff = -get_cmos_time();
+	clock_cmos_diff += get_seconds();
+	got_clock_diff = 1;
+#endif
+}
+
+static void reinit_timer(void)
+{
+#ifdef INIT_TIMER_AFTER_SUSPEND
+	unsigned long	flags;
+	extern spinlock_t i8253_lock;
+
+	spin_lock_irqsave(&i8253_lock, flags);
+	/* set the clock to 100 Hz */
+	outb_p(0x34, PIT_MODE);		/* binary, mode 2, LSB/MSB, ch 0 */
+	udelay(10);
+	outb_p(LATCH & 0xff, PIT_CH0);	/* LSB */
+	udelay(10);
+	outb(LATCH >> 8, PIT_CH0);	/* MSB */
+	udelay(10);
+	spin_unlock_irqrestore(&i8253_lock, flags);
+#endif
+}
+
+static int suspend(int vetoable)
+{
+	int		err;
+	struct apm_user	*as;
+
+	if (pm_send_all(PM_SUSPEND, (void *)3)) {
+		/* Vetoed */
+		if (vetoable) {
+			if (apm_info.connection_version > 0x100)
+				set_system_power_state(APM_STATE_REJECT);
+			err = -EBUSY;
+			ignore_sys_suspend = 0;
+			printk(KERN_WARNING "apm: suspend was vetoed.\n");
+			goto out;
+		}
+		printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n");
+	}
+
+	device_suspend(PMSG_SUSPEND);
+	local_irq_disable();
+	device_power_down(PMSG_SUSPEND);
+
+	/* serialize with the timer interrupt */
+	write_seqlock(&xtime_lock);
+
+	/* protect against access to timer chip registers */
+	spin_lock(&i8253_lock);
+
+	get_time_diff();
+	/*
+	 * Irq spinlock must be dropped around set_system_power_state.
+	 * We'll undo any timer changes due to interrupts below.
+	 */
+	spin_unlock(&i8253_lock);
+	write_sequnlock(&xtime_lock);
+	local_irq_enable();
+
+	save_processor_state();
+	err = set_system_power_state(APM_STATE_SUSPEND);
+	restore_processor_state();
+
+	local_irq_disable();
+	write_seqlock(&xtime_lock);
+	spin_lock(&i8253_lock);
+	reinit_timer();
+	set_time();
+	ignore_normal_resume = 1;
+
+	spin_unlock(&i8253_lock);
+	write_sequnlock(&xtime_lock);
+
+	if (err == APM_NO_ERROR)
+		err = APM_SUCCESS;
+	if (err != APM_SUCCESS)
+		apm_error("suspend", err);
+	err = (err == APM_SUCCESS) ? 0 : -EIO;
+	device_power_up();
+	local_irq_enable();
+	device_resume();
+	pm_send_all(PM_RESUME, (void *)0);
+	queue_event(APM_NORMAL_RESUME, NULL);
+ out:
+	spin_lock(&user_list_lock);
+	for (as = user_list; as != NULL; as = as->next) {
+		as->suspend_wait = 0;
+		as->suspend_result = err;
+	}
+	spin_unlock(&user_list_lock);
+	wake_up_interruptible(&apm_suspend_waitqueue);
+	return err;
+}
+
+static void standby(void)
+{
+	int	err;
+
+	local_irq_disable();
+	device_power_down(PMSG_SUSPEND);
+	/* serialize with the timer interrupt */
+	write_seqlock(&xtime_lock);
+	/* If needed, notify drivers here */
+	get_time_diff();
+	write_sequnlock(&xtime_lock);
+	local_irq_enable();
+
+	err = set_system_power_state(APM_STATE_STANDBY);
+	if ((err != APM_SUCCESS) && (err != APM_NO_ERROR))
+		apm_error("standby", err);
+
+	local_irq_disable();
+	device_power_up();
+	local_irq_enable();
+}
+
+static apm_event_t get_event(void)
+{
+	int		error;
+	apm_event_t	event;
+	apm_eventinfo_t	info;
+
+	static int notified;
+
+	/* we don't use the eventinfo */
+	error = apm_get_event(&event, &info);
+	if (error == APM_SUCCESS)
+		return event;
+
+	if ((error != APM_NO_EVENTS) && (notified++ == 0))
+		apm_error("get_event", error);
+
+	return 0;
+}
+
+static void check_events(void)
+{
+	apm_event_t		event;
+	static unsigned long	last_resume;
+	static int		ignore_bounce;
+
+	while ((event = get_event()) != 0) {
+		if (debug) {
+			if (event <= NR_APM_EVENT_NAME)
+				printk(KERN_DEBUG "apm: received %s notify\n",
+				       apm_event_name[event - 1]);
+			else
+				printk(KERN_DEBUG "apm: received unknown "
+				       "event 0x%02x\n", event);
+		}
+		if (ignore_bounce
+		    && ((jiffies - last_resume) > bounce_interval))
+			ignore_bounce = 0;
+
+		switch (event) {
+		case APM_SYS_STANDBY:
+		case APM_USER_STANDBY:
+			queue_event(event, NULL);
+			if (standbys_pending <= 0)
+				standby();
+			break;
+
+		case APM_USER_SUSPEND:
+#ifdef CONFIG_APM_IGNORE_USER_SUSPEND
+			if (apm_info.connection_version > 0x100)
+				set_system_power_state(APM_STATE_REJECT);
+			break;
+#endif
+		case APM_SYS_SUSPEND:
+			if (ignore_bounce) {
+				if (apm_info.connection_version > 0x100)
+					set_system_power_state(APM_STATE_REJECT);
+				break;
+			}
+			/*
+			 * If we are already processing a SUSPEND,
+			 * then further SUSPEND events from the BIOS
+			 * will be ignored.  We also return here to
+			 * cope with the fact that the Thinkpads keep
+			 * sending a SUSPEND event until something else
+			 * happens!
+			 */
+			if (ignore_sys_suspend)
+				return;
+			ignore_sys_suspend = 1;
+			queue_event(event, NULL);
+			if (suspends_pending <= 0)
+				(void) suspend(1);
+			break;
+
+		case APM_NORMAL_RESUME:
+		case APM_CRITICAL_RESUME:
+		case APM_STANDBY_RESUME:
+			ignore_sys_suspend = 0;
+			last_resume = jiffies;
+			ignore_bounce = 1;
+			if ((event != APM_NORMAL_RESUME)
+			    || (ignore_normal_resume == 0)) {
+				write_seqlock_irq(&xtime_lock);
+				set_time();
+				write_sequnlock_irq(&xtime_lock);
+				device_resume();
+				pm_send_all(PM_RESUME, (void *)0);
+				queue_event(event, NULL);
+			}
+			ignore_normal_resume = 0;
+			break;
+
+		case APM_CAPABILITY_CHANGE:
+		case APM_LOW_BATTERY:
+		case APM_POWER_STATUS_CHANGE:
+			queue_event(event, NULL);
+			/* If needed, notify drivers here */
+			break;
+
+		case APM_UPDATE_TIME:
+			write_seqlock_irq(&xtime_lock);
+			set_time();
+			write_sequnlock_irq(&xtime_lock);
+			break;
+
+		case APM_CRITICAL_SUSPEND:
+			/*
+			 * We are not allowed to reject a critical suspend.
+			 */
+			(void) suspend(0);
+			break;
+		}
+	}
+}
+
+static void apm_event_handler(void)
+{
+	static int	pending_count = 4;
+	int		err;
+
+	if ((standbys_pending > 0) || (suspends_pending > 0)) {
+		if ((apm_info.connection_version > 0x100) &&
+				(pending_count-- <= 0)) {
+			pending_count = 4;
+			if (debug)
+				printk(KERN_DEBUG "apm: setting state busy\n");
+			err = set_system_power_state(APM_STATE_BUSY);
+			if (err)
+				apm_error("busy", err);
+		}
+	} else
+		pending_count = 4;
+	check_events();
+}
+
+/*
+ * This is the APM thread main loop.
+ */
+
+static void apm_mainloop(void)
+{
+	DECLARE_WAITQUEUE(wait, current);
+
+	add_wait_queue(&apm_waitqueue, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	for (;;) {
+		schedule_timeout(APM_CHECK_TIMEOUT);
+		if (exit_kapmd)
+			break;
+		/*
+		 * Ok, check all events, check for idle (and mark us sleeping
+		 * so as not to count towards the load average)..
+		 */
+		set_current_state(TASK_INTERRUPTIBLE);
+		apm_event_handler();
+	}
+	remove_wait_queue(&apm_waitqueue, &wait);
+}
+
+static int check_apm_user(struct apm_user *as, const char *func)
+{
+	if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) {
+		printk(KERN_ERR "apm: %s passed bad filp\n", func);
+		return 1;
+	}
+	return 0;
+}
+
+static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
+{
+	struct apm_user *	as;
+	int			i;
+	apm_event_t		event;
+
+	as = fp->private_data;
+	if (check_apm_user(as, "read"))
+		return -EIO;
+	if ((int)count < sizeof(apm_event_t))
+		return -EINVAL;
+	if ((queue_empty(as)) && (fp->f_flags & O_NONBLOCK))
+		return -EAGAIN;
+	wait_event_interruptible(apm_waitqueue, !queue_empty(as));
+	i = count;
+	while ((i >= sizeof(event)) && !queue_empty(as)) {
+		event = get_queued_event(as);
+		if (copy_to_user(buf, &event, sizeof(event))) {
+			if (i < count)
+				break;
+			return -EFAULT;
+		}
+		switch (event) {
+		case APM_SYS_SUSPEND:
+		case APM_USER_SUSPEND:
+			as->suspends_read++;
+			break;
+
+		case APM_SYS_STANDBY:
+		case APM_USER_STANDBY:
+			as->standbys_read++;
+			break;
+		}
+		buf += sizeof(event);
+		i -= sizeof(event);
+	}
+	if (i < count)
+		return count - i;
+	if (signal_pending(current))
+		return -ERESTARTSYS;
+	return 0;
+}
+
+static unsigned int do_poll(struct file *fp, poll_table * wait)
+{
+	struct apm_user * as;
+
+	as = fp->private_data;
+	if (check_apm_user(as, "poll"))
+		return 0;
+	poll_wait(fp, &apm_waitqueue, wait);
+	if (!queue_empty(as))
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static int do_ioctl(struct inode * inode, struct file *filp,
+		    u_int cmd, u_long arg)
+{
+	struct apm_user *	as;
+
+	as = filp->private_data;
+	if (check_apm_user(as, "ioctl"))
+		return -EIO;
+	if ((!as->suser) || (!as->writer))
+		return -EPERM;
+	switch (cmd) {
+	case APM_IOC_STANDBY:
+		if (as->standbys_read > 0) {
+			as->standbys_read--;
+			as->standbys_pending--;
+			standbys_pending--;
+		} else
+			queue_event(APM_USER_STANDBY, as);
+		if (standbys_pending <= 0)
+			standby();
+		break;
+	case APM_IOC_SUSPEND:
+		if (as->suspends_read > 0) {
+			as->suspends_read--;
+			as->suspends_pending--;
+			suspends_pending--;
+		} else
+			queue_event(APM_USER_SUSPEND, as);
+		if (suspends_pending <= 0) {
+			return suspend(1);
+		} else {
+			as->suspend_wait = 1;
+			wait_event_interruptible(apm_suspend_waitqueue,
+					as->suspend_wait == 0);
+			return as->suspend_result;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int do_release(struct inode * inode, struct file * filp)
+{
+	struct apm_user *	as;
+
+	as = filp->private_data;
+	if (check_apm_user(as, "release"))
+		return 0;
+	filp->private_data = NULL;
+	if (as->standbys_pending > 0) {
+		standbys_pending -= as->standbys_pending;
+		if (standbys_pending <= 0)
+			standby();
+	}
+	if (as->suspends_pending > 0) {
+		suspends_pending -= as->suspends_pending;
+		if (suspends_pending <= 0)
+			(void) suspend(1);
+	}
+  	spin_lock(&user_list_lock);
+	if (user_list == as)
+		user_list = as->next;
+	else {
+		struct apm_user *	as1;
+
+		for (as1 = user_list;
+		     (as1 != NULL) && (as1->next != as);
+		     as1 = as1->next)
+			;
+		if (as1 == NULL)
+			printk(KERN_ERR "apm: filp not in user list\n");
+		else
+			as1->next = as->next;
+	}
+	spin_unlock(&user_list_lock);
+	kfree(as);
+	return 0;
+}
+
+static int do_open(struct inode * inode, struct file * filp)
+{
+	struct apm_user *	as;
+
+	as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
+	if (as == NULL) {
+		printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
+		       sizeof(*as));
+		return -ENOMEM;
+	}
+	as->magic = APM_BIOS_MAGIC;
+	as->event_tail = as->event_head = 0;
+	as->suspends_pending = as->standbys_pending = 0;
+	as->suspends_read = as->standbys_read = 0;
+	/*
+	 * XXX - this is a tiny bit broken, when we consider BSD
+         * process accounting. If the device is opened by root, we
+	 * instantly flag that we used superuser privs. Who knows,
+	 * we might close the device immediately without doing a
+	 * privileged operation -- cevans
+	 */
+	as->suser = capable(CAP_SYS_ADMIN);
+	as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
+	as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
+	spin_lock(&user_list_lock);
+	as->next = user_list;
+	user_list = as;
+	spin_unlock(&user_list_lock);
+	filp->private_data = as;
+	return 0;
+}
+
+static int apm_get_info(char *buf, char **start, off_t fpos, int length)
+{
+	char *		p;
+	unsigned short	bx;
+	unsigned short	cx;
+	unsigned short	dx;
+	int		error;
+	unsigned short  ac_line_status = 0xff;
+	unsigned short  battery_status = 0xff;
+	unsigned short  battery_flag   = 0xff;
+	int		percentage     = -1;
+	int             time_units     = -1;
+	char            *units         = "?";
+
+	p = buf;
+
+	if ((num_online_cpus() == 1) &&
+	    !(error = apm_get_power_status(&bx, &cx, &dx))) {
+		ac_line_status = (bx >> 8) & 0xff;
+		battery_status = bx & 0xff;
+		if ((cx & 0xff) != 0xff)
+			percentage = cx & 0xff;
+
+		if (apm_info.connection_version > 0x100) {
+			battery_flag = (cx >> 8) & 0xff;
+			if (dx != 0xffff) {
+				units = (dx & 0x8000) ? "min" : "sec";
+				time_units = dx & 0x7fff;
+			}
+		}
+	}
+	/* Arguments, with symbols from linux/apm_bios.h.  Information is
+	   from the Get Power Status (0x0a) call unless otherwise noted.
+
+	   0) Linux driver version (this will change if format changes)
+	   1) APM BIOS Version.  Usually 1.0, 1.1 or 1.2.
+	   2) APM flags from APM Installation Check (0x00):
+	      bit 0: APM_16_BIT_SUPPORT
+	      bit 1: APM_32_BIT_SUPPORT
+	      bit 2: APM_IDLE_SLOWS_CLOCK
+	      bit 3: APM_BIOS_DISABLED
+	      bit 4: APM_BIOS_DISENGAGED
+	   3) AC line status
+	      0x00: Off-line
+	      0x01: On-line
+	      0x02: On backup power (BIOS >= 1.1 only)
+	      0xff: Unknown
+	   4) Battery status
+	      0x00: High
+	      0x01: Low
+	      0x02: Critical
+	      0x03: Charging
+	      0x04: Selected battery not present (BIOS >= 1.2 only)
+	      0xff: Unknown
+	   5) Battery flag
+	      bit 0: High
+	      bit 1: Low
+	      bit 2: Critical
+	      bit 3: Charging
+	      bit 7: No system battery
+	      0xff: Unknown
+	   6) Remaining battery life (percentage of charge):
+	      0-100: valid
+	      -1: Unknown
+	   7) Remaining battery life (time units):
+	      Number of remaining minutes or seconds
+	      -1: Unknown
+	   8) min = minutes; sec = seconds */
+
+	p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+		     driver_version,
+		     (apm_info.bios.version >> 8) & 0xff,
+		     apm_info.bios.version & 0xff,
+		     apm_info.bios.flags,
+		     ac_line_status,
+		     battery_status,
+		     battery_flag,
+		     percentage,
+		     time_units,
+		     units);
+
+	return p - buf;
+}
+
+static int apm(void *unused)
+{
+	unsigned short	bx;
+	unsigned short	cx;
+	unsigned short	dx;
+	int		error;
+	char *		power_stat;
+	char *		bat_stat;
+
+	kapmd_running = 1;
+
+	daemonize("kapmd");
+
+	current->flags |= PF_NOFREEZE;
+
+#ifdef CONFIG_SMP
+	/* 2002/08/01 - WT
+	 * This is to avoid random crashes at boot time during initialization
+	 * on SMP systems in case of "apm=power-off" mode. Seen on ASUS A7M266D.
+	 * Some bioses don't like being called from CPU != 0.
+	 * Method suggested by Ingo Molnar.
+	 */
+	set_cpus_allowed(current, cpumask_of_cpu(0));
+	BUG_ON(smp_processor_id() != 0);
+#endif
+
+	if (apm_info.connection_version == 0) {
+		apm_info.connection_version = apm_info.bios.version;
+		if (apm_info.connection_version > 0x100) {
+			/*
+			 * We only support BIOSs up to version 1.2
+			 */
+			if (apm_info.connection_version > 0x0102)
+				apm_info.connection_version = 0x0102;
+			error = apm_driver_version(&apm_info.connection_version);
+			if (error != APM_SUCCESS) {
+				apm_error("driver version", error);
+				/* Fall back to an APM 1.0 connection. */
+				apm_info.connection_version = 0x100;
+			}
+		}
+	}
+
+	if (debug)
+		printk(KERN_INFO "apm: Connection version %d.%d\n",
+			(apm_info.connection_version >> 8) & 0xff,
+			apm_info.connection_version & 0xff);
+
+#ifdef CONFIG_APM_DO_ENABLE
+	if (apm_info.bios.flags & APM_BIOS_DISABLED) {
+		/*
+		 * This call causes my NEC UltraLite Versa 33/C to hang if it
+		 * is booted with PM disabled but not in the docking station.
+		 * Unfortunate ...
+		 */
+		error = apm_enable_power_management(1);
+		if (error) {
+			apm_error("enable power management", error);
+			return -1;
+		}
+	}
+#endif
+
+	if ((apm_info.bios.flags & APM_BIOS_DISENGAGED)
+	    && (apm_info.connection_version > 0x0100)) {
+		error = apm_engage_power_management(APM_DEVICE_ALL, 1);
+		if (error) {
+			apm_error("engage power management", error);
+			return -1;
+		}
+	}
+
+	if (debug && (num_online_cpus() == 1 || smp )) {
+		error = apm_get_power_status(&bx, &cx, &dx);
+		if (error)
+			printk(KERN_INFO "apm: power status not available\n");
+		else {
+			switch ((bx >> 8) & 0xff) {
+			case 0: power_stat = "off line"; break;
+			case 1: power_stat = "on line"; break;
+			case 2: power_stat = "on backup power"; break;
+			default: power_stat = "unknown"; break;
+			}
+			switch (bx & 0xff) {
+			case 0: bat_stat = "high"; break;
+			case 1: bat_stat = "low"; break;
+			case 2: bat_stat = "critical"; break;
+			case 3: bat_stat = "charging"; break;
+			default: bat_stat = "unknown"; break;
+			}
+			printk(KERN_INFO
+			       "apm: AC %s, battery status %s, battery life ",
+			       power_stat, bat_stat);
+			if ((cx & 0xff) == 0xff)
+				printk("unknown\n");
+			else
+				printk("%d%%\n", cx & 0xff);
+			if (apm_info.connection_version > 0x100) {
+				printk(KERN_INFO
+				       "apm: battery flag 0x%02x, battery life ",
+				       (cx >> 8) & 0xff);
+				if (dx == 0xffff)
+					printk("unknown\n");
+				else
+					printk("%d %s\n", dx & 0x7fff,
+						(dx & 0x8000) ?
+						"minutes" : "seconds");
+			}
+		}
+	}
+
+	/* Install our power off handler.. */
+	if (power_off)
+		pm_power_off = apm_power_off;
+
+	if (num_online_cpus() == 1 || smp) {
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+		console_blank_hook = apm_console_blank;
+#endif
+		apm_mainloop();
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+		console_blank_hook = NULL;
+#endif
+	}
+	kapmd_running = 0;
+
+	return 0;
+}
+
+#ifndef MODULE
+static int __init apm_setup(char *str)
+{
+	int	invert;
+
+	while ((str != NULL) && (*str != '\0')) {
+		if (strncmp(str, "off", 3) == 0)
+			apm_disabled = 1;
+		if (strncmp(str, "on", 2) == 0)
+			apm_disabled = 0;
+		if ((strncmp(str, "bounce-interval=", 16) == 0) ||
+		    (strncmp(str, "bounce_interval=", 16) == 0))
+			bounce_interval = simple_strtol(str + 16, NULL, 0);
+		if ((strncmp(str, "idle-threshold=", 15) == 0) ||
+		    (strncmp(str, "idle_threshold=", 15) == 0))
+			idle_threshold = simple_strtol(str + 15, NULL, 0);
+		if ((strncmp(str, "idle-period=", 12) == 0) ||
+		    (strncmp(str, "idle_period=", 12) == 0))
+			idle_period = simple_strtol(str + 12, NULL, 0);
+		invert = (strncmp(str, "no-", 3) == 0) ||
+			(strncmp(str, "no_", 3) == 0);
+		if (invert)
+			str += 3;
+		if (strncmp(str, "debug", 5) == 0)
+			debug = !invert;
+		if ((strncmp(str, "power-off", 9) == 0) ||
+		    (strncmp(str, "power_off", 9) == 0))
+			power_off = !invert;
+		if (strncmp(str, "smp", 3) == 0)
+		{
+			smp = !invert;
+			idle_threshold = 100;
+		}
+		if ((strncmp(str, "allow-ints", 10) == 0) ||
+		    (strncmp(str, "allow_ints", 10) == 0))
+ 			apm_info.allow_ints = !invert;
+		if ((strncmp(str, "broken-psr", 10) == 0) ||
+		    (strncmp(str, "broken_psr", 10) == 0))
+			apm_info.get_power_status_broken = !invert;
+		if ((strncmp(str, "realmode-power-off", 18) == 0) ||
+		    (strncmp(str, "realmode_power_off", 18) == 0))
+			apm_info.realmode_power_off = !invert;
+		str = strchr(str, ',');
+		if (str != NULL)
+			str += strspn(str, ", \t");
+	}
+	return 1;
+}
+
+__setup("apm=", apm_setup);
+#endif
+
+static struct file_operations apm_bios_fops = {
+	.owner		= THIS_MODULE,
+	.read		= do_read,
+	.poll		= do_poll,
+	.ioctl		= do_ioctl,
+	.open		= do_open,
+	.release	= do_release,
+};
+
+static struct miscdevice apm_device = {
+	APM_MINOR_DEV,
+	"apm_bios",
+	&apm_bios_fops
+};
+
+
+/* Simple "print if true" callback */
+static int __init print_if_true(struct dmi_system_id *d)
+{
+	printk("%s\n", d->ident);
+	return 0;
+}
+
+/*
+ * Some Bioses enable the PS/2 mouse (touchpad) at resume, even if it was
+ * disabled before the suspend. Linux used to get terribly confused by that.
+ */
+static int __init broken_ps2_resume(struct dmi_system_id *d)
+{
+	printk(KERN_INFO "%s machine detected. Mousepad Resume Bug workaround hopefully not needed.\n", d->ident);
+	return 0;
+}
+
+/* Some bioses have a broken protected mode poweroff and need to use realmode */
+static int __init set_realmode_power_off(struct dmi_system_id *d)
+{
+	if (apm_info.realmode_power_off == 0) {
+		apm_info.realmode_power_off = 1;
+		printk(KERN_INFO "%s bios detected. Using realmode poweroff only.\n", d->ident);
+	}
+	return 0;
+}
+
+/* Some laptops require interrupts to be enabled during APM calls */
+static int __init set_apm_ints(struct dmi_system_id *d)
+{
+	if (apm_info.allow_ints == 0) {
+		apm_info.allow_ints = 1;
+		printk(KERN_INFO "%s machine detected. Enabling interrupts during APM calls.\n", d->ident);
+	}
+	return 0;
+}
+
+/* Some APM bioses corrupt memory or just plain do not work */
+static int __init apm_is_horked(struct dmi_system_id *d)
+{
+	if (apm_info.disabled == 0) {
+		apm_info.disabled = 1;
+		printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident);
+	}
+	return 0;
+}
+
+static int __init apm_is_horked_d850md(struct dmi_system_id *d)
+{
+	if (apm_info.disabled == 0) {
+		apm_info.disabled = 1;
+		printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident);
+		printk(KERN_INFO "This bug is fixed in bios P15 which is available for \n");
+		printk(KERN_INFO "download from support.intel.com \n");
+	}
+	return 0;
+}
+
+/* Some APM bioses hang on APM idle calls */
+static int __init apm_likes_to_melt(struct dmi_system_id *d)
+{
+	if (apm_info.forbid_idle == 0) {
+		apm_info.forbid_idle = 1;
+		printk(KERN_INFO "%s machine detected. Disabling APM idle calls.\n", d->ident);
+	}
+	return 0;
+}
+
+/*
+ *  Check for clue free BIOS implementations who use
+ *  the following QA technique
+ *
+ *      [ Write BIOS Code ]<------
+ *               |                ^
+ *      < Does it Compile >----N--
+ *               |Y               ^
+ *	< Does it Boot Win98 >-N--
+ *               |Y
+ *           [Ship It]
+ *
+ *	Phoenix A04  08/24/2000 is known bad (Dell Inspiron 5000e)
+ *	Phoenix A07  09/29/2000 is known good (Dell Inspiron 5000)
+ */
+static int __init broken_apm_power(struct dmi_system_id *d)
+{
+	apm_info.get_power_status_broken = 1;
+	printk(KERN_WARNING "BIOS strings suggest APM bugs, disabling power status reporting.\n");
+	return 0;
+}
+
+/*
+ * This bios swaps the APM minute reporting bytes over (Many sony laptops
+ * have this problem).
+ */
+static int __init swab_apm_power_in_minutes(struct dmi_system_id *d)
+{
+	apm_info.get_power_status_swabinminutes = 1;
+	printk(KERN_WARNING "BIOS strings suggest APM reports battery life in minutes and wrong byte order.\n");
+	return 0;
+}
+
+static struct dmi_system_id __initdata apm_dmi_table[] = {
+	{
+		print_if_true,
+		KERN_WARNING "IBM T23 - BIOS 1.03b+ and controller firmware 1.02+ may be needed for Linux APM.",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+			DMI_MATCH(DMI_BIOS_VERSION, "1AET38WW (1.01b)"), },
+	},
+	{	/* Handle problems with APM on the C600 */
+		broken_ps2_resume, "Dell Latitude C600",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C600"), },
+	},
+	{	/* Allow interrupts during suspend on Dell Latitude laptops*/
+		set_apm_ints, "Dell Latitude",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C510"), }
+	},
+	{	/* APM crashes */
+		apm_is_horked, "Dell Inspiron 2500",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"),
+			DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+	},
+	{	/* Allow interrupts during suspend on Dell Inspiron laptops*/
+		set_apm_ints, "Dell Inspiron", {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 4000"), },
+	},
+	{	/* Handle problems with APM on Inspiron 5000e */
+		broken_apm_power, "Dell Inspiron 5000e",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "A04"),
+			DMI_MATCH(DMI_BIOS_DATE, "08/24/2000"), },
+	},
+	{	/* Handle problems with APM on Inspiron 2500 */
+		broken_apm_power, "Dell Inspiron 2500",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "A12"),
+			DMI_MATCH(DMI_BIOS_DATE, "02/04/2002"), },
+	},
+	{	/* APM crashes */
+		apm_is_horked, "Dell Dimension 4100",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"),
+			DMI_MATCH(DMI_BIOS_VENDOR,"Intel Corp."),
+			DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+	},
+	{	/* Allow interrupts during suspend on Compaq Laptops*/
+		set_apm_ints, "Compaq 12XL125",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Compaq PC"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION,"4.06"), },
+	},
+	{	/* Allow interrupts during APM or the clock goes slow */
+		set_apm_ints, "ASUSTeK",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "L8400K series Notebook PC"), },
+	},
+	{	/* APM blows on shutdown */
+		apm_is_horked, "ABIT KX7-333[R]",
+		{	DMI_MATCH(DMI_BOARD_VENDOR, "ABIT"),
+			DMI_MATCH(DMI_BOARD_NAME, "VT8367-8233A (KX7-333[R])"), },
+	},
+	{	/* APM crashes */
+		apm_is_horked, "Trigem Delhi3",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "TriGem Computer, Inc"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Delhi3"), },
+	},
+	{	/* APM crashes */
+		apm_is_horked, "Fujitsu-Siemens",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "hoenix/FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_BIOS_VERSION, "Version1.01"), },
+	},
+	{	/* APM crashes */
+		apm_is_horked_d850md, "Intel D850MD",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+			DMI_MATCH(DMI_BIOS_VERSION, "MV85010A.86A.0016.P07.0201251536"), },
+	},
+	{	/* APM crashes */
+		apm_is_horked, "Intel D810EMO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+			DMI_MATCH(DMI_BIOS_VERSION, "MO81010A.86A.0008.P04.0004170800"), },
+	},
+	{	/* APM crashes */
+		apm_is_horked, "Dell XPS-Z",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+			DMI_MATCH(DMI_BIOS_VERSION, "A11"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), },
+	},
+	{	/* APM crashes */
+		apm_is_horked, "Sharp PC-PJ/AX",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PC-PJ/AX"),
+			DMI_MATCH(DMI_BIOS_VENDOR,"SystemSoft"),
+			DMI_MATCH(DMI_BIOS_VERSION,"Version R2.08"), },
+	},
+	{	/* APM crashes */
+		apm_is_horked, "Dell Inspiron 2500",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"),
+			DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+	},
+	{	/* APM idle hangs */
+		apm_likes_to_melt, "Jabil AMD",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+			DMI_MATCH(DMI_BIOS_VERSION, "0AASNP06"), },
+	},
+	{	/* APM idle hangs */
+		apm_likes_to_melt, "AMI Bios",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+			DMI_MATCH(DMI_BIOS_VERSION, "0AASNP05"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-N505X(DE) */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0206H"),
+			DMI_MATCH(DMI_BIOS_DATE, "08/23/99"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-N505VX */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "W2K06H0"),
+			DMI_MATCH(DMI_BIOS_DATE, "02/03/00"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-XG29 */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0117A0"),
+			DMI_MATCH(DMI_BIOS_DATE, "04/25/00"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-Z600NE */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0121Z1"),
+			DMI_MATCH(DMI_BIOS_DATE, "05/11/00"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-Z600NE */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "WME01Z1"),
+			DMI_MATCH(DMI_BIOS_DATE, "08/11/00"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-Z600LEK(DE) */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0206Z3"),
+			DMI_MATCH(DMI_BIOS_DATE, "12/25/00"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-Z505LS */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0203D0"),
+			DMI_MATCH(DMI_BIOS_DATE, "05/12/00"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-Z505LS */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0203Z3"),
+			DMI_MATCH(DMI_BIOS_DATE, "08/25/00"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-Z505LS (with updated BIOS) */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0209Z3"),
+			DMI_MATCH(DMI_BIOS_DATE, "05/12/01"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-F104K */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0204K2"),
+			DMI_MATCH(DMI_BIOS_DATE, "08/28/00"), },
+	},
+
+	{	/* Handle problems with APM on Sony Vaio PCG-C1VN/C1VE */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0208P1"),
+			DMI_MATCH(DMI_BIOS_DATE, "11/09/00"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-C1VE */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "R0204P1"),
+			DMI_MATCH(DMI_BIOS_DATE, "09/12/00"), },
+	},
+	{	/* Handle problems with APM on Sony Vaio PCG-C1VE */
+		swab_apm_power_in_minutes, "Sony VAIO",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "WXPO1Z3"),
+			DMI_MATCH(DMI_BIOS_DATE, "10/26/01"), },
+	},
+	{	/* broken PM poweroff bios */
+		set_realmode_power_off, "Award Software v4.60 PGMA",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."),
+			DMI_MATCH(DMI_BIOS_VERSION, "4.60 PGMA"),
+			DMI_MATCH(DMI_BIOS_DATE, "134526184"), },
+	},
+
+	/* Generic per vendor APM settings  */
+
+	{	/* Allow interrupts during suspend on IBM laptops */
+		set_apm_ints, "IBM",
+		{	DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
+	},
+
+	{ }
+};
+
+/*
+ * Just start the APM thread. We do NOT want to do APM BIOS
+ * calls from anything but the APM thread, if for no other reason
+ * than the fact that we don't trust the APM BIOS. This way,
+ * most common APM BIOS problems that lead to protection errors
+ * etc will have at least some level of being contained...
+ *
+ * In short, if something bad happens, at least we have a choice
+ * of just killing the apm thread..
+ */
+static int __init apm_init(void)
+{
+	struct proc_dir_entry *apm_proc;
+	int ret;
+	int i;
+
+	dmi_check_system(apm_dmi_table);
+
+	if (apm_info.bios.version == 0) {
+		printk(KERN_INFO "apm: BIOS not found.\n");
+		return -ENODEV;
+	}
+	printk(KERN_INFO
+		"apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n",
+		((apm_info.bios.version >> 8) & 0xff),
+		(apm_info.bios.version & 0xff),
+		apm_info.bios.flags,
+		driver_version);
+	if ((apm_info.bios.flags & APM_32_BIT_SUPPORT) == 0) {
+		printk(KERN_INFO "apm: no 32 bit BIOS support\n");
+		return -ENODEV;
+	}
+
+	if (allow_ints)
+		apm_info.allow_ints = 1;
+	if (broken_psr)
+		apm_info.get_power_status_broken = 1;
+	if (realmode_power_off)
+		apm_info.realmode_power_off = 1;
+	/* User can override, but default is to trust DMI */
+	if (apm_disabled != -1)
+		apm_info.disabled = apm_disabled;
+
+	/*
+	 * Fix for the Compaq Contura 3/25c which reports BIOS version 0.1
+	 * but is reportedly a 1.0 BIOS.
+	 */
+	if (apm_info.bios.version == 0x001)
+		apm_info.bios.version = 0x100;
+
+	/* BIOS < 1.2 doesn't set cseg_16_len */
+	if (apm_info.bios.version < 0x102)
+		apm_info.bios.cseg_16_len = 0; /* 64k */
+
+	if (debug) {
+		printk(KERN_INFO "apm: entry %x:%lx cseg16 %x dseg %x",
+			apm_info.bios.cseg, apm_info.bios.offset,
+			apm_info.bios.cseg_16, apm_info.bios.dseg);
+		if (apm_info.bios.version > 0x100)
+			printk(" cseg len %x, dseg len %x",
+				apm_info.bios.cseg_len,
+				apm_info.bios.dseg_len);
+		if (apm_info.bios.version > 0x101)
+			printk(" cseg16 len %x", apm_info.bios.cseg_16_len);
+		printk("\n");
+	}
+
+	if (apm_info.disabled) {
+		printk(KERN_NOTICE "apm: disabled on user request.\n");
+		return -ENODEV;
+	}
+	if ((num_online_cpus() > 1) && !power_off && !smp) {
+		printk(KERN_NOTICE "apm: disabled - APM is not SMP safe.\n");
+		apm_info.disabled = 1;
+		return -ENODEV;
+	}
+	if (PM_IS_ACTIVE()) {
+		printk(KERN_NOTICE "apm: overridden by ACPI.\n");
+		apm_info.disabled = 1;
+		return -ENODEV;
+	}
+	pm_active = 1;
+
+	/*
+	 * Set up a segment that references the real mode segment 0x40
+	 * that extends up to the end of page zero (that we have reserved).
+	 * This is for buggy BIOS's that refer to (real mode) segment 0x40
+	 * even though they are called in protected mode.
+	 */
+	set_base(bad_bios_desc, __va((unsigned long)0x40 << 4));
+	_set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4));
+
+	apm_bios_entry.offset = apm_info.bios.offset;
+	apm_bios_entry.segment = APM_CS;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		set_base(per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+			 __va((unsigned long)apm_info.bios.cseg << 4));
+		set_base(per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+			 __va((unsigned long)apm_info.bios.cseg_16 << 4));
+		set_base(per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+			 __va((unsigned long)apm_info.bios.dseg << 4));
+#ifndef APM_RELAX_SEGMENTS
+		if (apm_info.bios.version == 0x100) {
+#endif
+			/* For ASUS motherboard, Award BIOS rev 110 (and others?) */
+			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 - 1);
+			/* For some unknown machine. */
+			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], 64 * 1024 - 1);
+			/* For the DEC Hinote Ultra CT475 (and others?) */
+			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3], 64 * 1024 - 1);
+#ifndef APM_RELAX_SEGMENTS
+		} else {
+			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+				(apm_info.bios.cseg_len - 1) & 0xffff);
+			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+				(apm_info.bios.cseg_16_len - 1) & 0xffff);
+			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+				(apm_info.bios.dseg_len - 1) & 0xffff);
+		      /* workaround for broken BIOSes */
+	                if (apm_info.bios.cseg_len <= apm_info.bios.offset)
+        	                _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 -1);
+                       if (apm_info.bios.dseg_len <= 0x40) { /* 0x40 * 4kB == 64kB */
+                        	/* for the BIOS that assumes granularity = 1 */
+                        	per_cpu(cpu_gdt_table, i)[APM_DS >> 3].b |= 0x800000;
+                        	printk(KERN_NOTICE "apm: we set the granularity of dseg.\n");
+        	        }
+		}
+#endif
+	}
+
+	apm_proc = create_proc_info_entry("apm", 0, NULL, apm_get_info);
+	if (apm_proc)
+		apm_proc->owner = THIS_MODULE;
+
+	ret = kernel_thread(apm, NULL, CLONE_KERNEL | SIGCHLD);
+	if (ret < 0) {
+		printk(KERN_ERR "apm: disabled - Unable to start kernel thread.\n");
+		return -ENOMEM;
+	}
+
+	if (num_online_cpus() > 1 && !smp ) {
+		printk(KERN_NOTICE
+		   "apm: disabled - APM is not SMP safe (power off active).\n");
+		return 0;
+	}
+
+	misc_register(&apm_device);
+
+	if (HZ != 100)
+		idle_period = (idle_period * HZ) / 100;
+	if (idle_threshold < 100) {
+		original_pm_idle = pm_idle;
+		pm_idle  = apm_cpu_idle;
+		set_pm_idle = 1;
+	}
+
+	return 0;
+}
+
+static void __exit apm_exit(void)
+{
+	int	error;
+
+	if (set_pm_idle) {
+		pm_idle = original_pm_idle;
+		/*
+		 * We are about to unload the current idle thread pm callback
+		 * (pm_idle), Wait for all processors to update cached/local
+		 * copies of pm_idle before proceeding.
+		 */
+		cpu_idle_wait();
+	}
+	if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0)
+	    && (apm_info.connection_version > 0x0100)) {
+		error = apm_engage_power_management(APM_DEVICE_ALL, 0);
+		if (error)
+			apm_error("disengage power management", error);
+	}
+	misc_deregister(&apm_device);
+	remove_proc_entry("apm", NULL);
+	if (power_off)
+		pm_power_off = NULL;
+	exit_kapmd = 1;
+	while (kapmd_running)
+		schedule();
+	pm_active = 0;
+}
+
+module_init(apm_init);
+module_exit(apm_exit);
+
+MODULE_AUTHOR("Stephen Rothwell");
+MODULE_DESCRIPTION("Advanced Power Management");
+MODULE_LICENSE("GPL");
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Enable debug mode");
+module_param(power_off, bool, 0444);
+MODULE_PARM_DESC(power_off, "Enable power off");
+module_param(bounce_interval, int, 0444);
+MODULE_PARM_DESC(bounce_interval,
+		"Set the number of ticks to ignore suspend bounces");
+module_param(allow_ints, bool, 0444);
+MODULE_PARM_DESC(allow_ints, "Allow interrupts during BIOS calls");
+module_param(broken_psr, bool, 0444);
+MODULE_PARM_DESC(broken_psr, "BIOS has a broken GetPowerStatus call");
+module_param(realmode_power_off, bool, 0444);
+MODULE_PARM_DESC(realmode_power_off,
+		"Switch to real mode before powering off");
+module_param(idle_threshold, int, 0444);
+MODULE_PARM_DESC(idle_threshold,
+	"System idle percentage above which to make APM BIOS idle calls");
+module_param(idle_period, int, 0444);
+MODULE_PARM_DESC(idle_period,
+	"Period (in sec/100) over which to caculate the idle percentage");
+module_param(smp, bool, 0444);
+MODULE_PARM_DESC(smp,
+	"Set this to enable APM use on an SMP platform. Use with caution on older systems");
+MODULE_ALIAS_MISCDEV(APM_MINOR_DEV);
diff --git a/arch/i386/kernel/asm-offsets.c b/arch/i386/kernel/asm-offsets.c
new file mode 100644
index 000000000000..36d66e2077d0
--- /dev/null
+++ b/arch/i386/kernel/asm-offsets.c
@@ -0,0 +1,72 @@
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <asm/ucontext.h>
+#include "sigframe.h"
+#include <asm/fixmap.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+
+#define DEFINE(sym, val) \
+        asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+#define OFFSET(sym, str, mem) \
+	DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+	OFFSET(SIGCONTEXT_eax, sigcontext, eax);
+	OFFSET(SIGCONTEXT_ebx, sigcontext, ebx);
+	OFFSET(SIGCONTEXT_ecx, sigcontext, ecx);
+	OFFSET(SIGCONTEXT_edx, sigcontext, edx);
+	OFFSET(SIGCONTEXT_esi, sigcontext, esi);
+	OFFSET(SIGCONTEXT_edi, sigcontext, edi);
+	OFFSET(SIGCONTEXT_ebp, sigcontext, ebp);
+	OFFSET(SIGCONTEXT_esp, sigcontext, esp);
+	OFFSET(SIGCONTEXT_eip, sigcontext, eip);
+	BLANK();
+
+	OFFSET(CPUINFO_x86, cpuinfo_x86, x86);
+	OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor);
+	OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model);
+	OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask);
+	OFFSET(CPUINFO_hard_math, cpuinfo_x86, hard_math);
+	OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level);
+	OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability);
+	OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id);
+	BLANK();
+
+	OFFSET(TI_task, thread_info, task);
+	OFFSET(TI_exec_domain, thread_info, exec_domain);
+	OFFSET(TI_flags, thread_info, flags);
+	OFFSET(TI_status, thread_info, status);
+	OFFSET(TI_cpu, thread_info, cpu);
+	OFFSET(TI_preempt_count, thread_info, preempt_count);
+	OFFSET(TI_addr_limit, thread_info, addr_limit);
+	OFFSET(TI_restart_block, thread_info, restart_block);
+	BLANK();
+
+	OFFSET(EXEC_DOMAIN_handler, exec_domain, handler);
+	OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext);
+	BLANK();
+
+	OFFSET(pbe_address, pbe, address);
+	OFFSET(pbe_orig_address, pbe, orig_address);
+	OFFSET(pbe_next, pbe, next);
+
+	/* Offset from the sysenter stack to tss.esp0 */
+	DEFINE(TSS_sysenter_esp0, offsetof(struct tss_struct, esp0) -
+		 sizeof(struct tss_struct));
+
+	DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+	DEFINE(VSYSCALL_BASE, __fix_to_virt(FIX_VSYSCALL));
+}
diff --git a/arch/i386/kernel/bootflag.c b/arch/i386/kernel/bootflag.c
new file mode 100644
index 000000000000..4c30ed01f4e1
--- /dev/null
+++ b/arch/i386/kernel/bootflag.c
@@ -0,0 +1,99 @@
+/*
+ *	Implement 'Simple Boot Flag Specification 2.0'
+ */
+
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/acpi.h>
+#include <asm/io.h>
+
+#include <linux/mc146818rtc.h>
+
+
+#define SBF_RESERVED (0x78)
+#define SBF_PNPOS    (1<<0)
+#define SBF_BOOTING  (1<<1)
+#define SBF_DIAG     (1<<2)
+#define SBF_PARITY   (1<<7)
+
+
+int sbf_port __initdata = -1;	/* set via acpi_boot_init() */
+
+
+static int __init parity(u8 v)
+{
+	int x = 0;
+	int i;
+	
+	for(i=0;i<8;i++)
+	{
+		x^=(v&1);
+		v>>=1;
+	}
+	return x;
+}
+
+static void __init sbf_write(u8 v)
+{
+	unsigned long flags;
+	if(sbf_port != -1)
+	{
+		v &= ~SBF_PARITY;
+		if(!parity(v))
+			v|=SBF_PARITY;
+
+		printk(KERN_INFO "Simple Boot Flag at 0x%x set to 0x%x\n", sbf_port, v);
+
+		spin_lock_irqsave(&rtc_lock, flags);
+		CMOS_WRITE(v, sbf_port);
+		spin_unlock_irqrestore(&rtc_lock, flags);
+	}
+}
+
+static u8 __init sbf_read(void)
+{
+	u8 v;
+	unsigned long flags;
+	if(sbf_port == -1)
+		return 0;
+	spin_lock_irqsave(&rtc_lock, flags);
+	v = CMOS_READ(sbf_port);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return v;
+}
+
+static int __init sbf_value_valid(u8 v)
+{
+	if(v&SBF_RESERVED)		/* Reserved bits */
+		return 0;
+	if(!parity(v))
+		return 0;
+	return 1;
+}
+
+static int __init sbf_init(void)
+{
+	u8 v;
+	if(sbf_port == -1)
+		return 0;
+	v = sbf_read();
+	if(!sbf_value_valid(v))
+		printk(KERN_WARNING "Simple Boot Flag value 0x%x read from CMOS RAM was invalid\n",v);
+
+	v &= ~SBF_RESERVED;
+	v &= ~SBF_BOOTING;
+	v &= ~SBF_DIAG;
+#if defined(CONFIG_ISAPNP)
+	v |= SBF_PNPOS;
+#endif
+	sbf_write(v);
+	return 0;
+}
+
+module_init(sbf_init);
diff --git a/arch/i386/kernel/cpu/Makefile b/arch/i386/kernel/cpu/Makefile
new file mode 100644
index 000000000000..010aecfffbc1
--- /dev/null
+++ b/arch/i386/kernel/cpu/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for x86-compatible CPU details and quirks
+#
+
+obj-y	:=	common.o proc.o
+
+obj-y	+=	amd.o
+obj-y	+=	cyrix.o
+obj-y	+=	centaur.o
+obj-y	+=	transmeta.o
+obj-y	+=	intel.o intel_cacheinfo.o
+obj-y	+=	rise.o
+obj-y	+=	nexgen.o
+obj-y	+=	umc.o
+
+obj-$(CONFIG_X86_MCE)	+=	mcheck/
+
+obj-$(CONFIG_MTRR)	+= 	mtrr/
+obj-$(CONFIG_CPU_FREQ)	+=	cpufreq/
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
new file mode 100644
index 000000000000..ae94585d0445
--- /dev/null
+++ b/arch/i386/kernel/cpu/amd.c
@@ -0,0 +1,249 @@
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ *	B step AMD K6 before B 9730xxxx have hardware bugs that can cause
+ *	misexecution of code under Linux. Owners of such processors should
+ *	contact AMD for precise details and a CPU swap.
+ *
+ *	See	http://www.multimania.com/poulot/k6bug.html
+ *		http://www.amd.com/K6/k6docs/revgd.html
+ *
+ *	The following test is erm.. interesting. AMD neglected to up
+ *	the chip setting when fixing the bug but they also tweaked some
+ *	performance at the same time..
+ */
+ 
+extern void vide(void);
+__asm__(".align 4\nvide: ret");
+
+static void __init init_amd(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	int mbytes = num_physpages >> (20-PAGE_SHIFT);
+	int r;
+
+	/*
+	 *	FIXME: We should handle the K5 here. Set up the write
+	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
+	 *	no bus pipeline)
+	 */
+
+	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+	clear_bit(0*32+31, c->x86_capability);
+	
+	r = get_model_name(c);
+
+	switch(c->x86)
+	{
+		case 4:
+		/*
+		 * General Systems BIOSen alias the cpu frequency registers
+		 * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+		 * drivers subsequently pokes it, and changes the CPU speed.
+		 * Workaround : Remove the unneeded alias.
+		 */
+#define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
+#define CBAR_ENB	(0x80000000)
+#define CBAR_KEY	(0X000000CB)
+			if (c->x86_model==9 || c->x86_model == 10) {
+				if (inl (CBAR) & CBAR_ENB)
+					outl (0 | CBAR_KEY, CBAR);
+			}
+			break;
+		case 5:
+			if( c->x86_model < 6 )
+			{
+				/* Based on AMD doc 20734R - June 2000 */
+				if ( c->x86_model == 0 ) {
+					clear_bit(X86_FEATURE_APIC, c->x86_capability);
+					set_bit(X86_FEATURE_PGE, c->x86_capability);
+				}
+				break;
+			}
+			
+			if ( c->x86_model == 6 && c->x86_mask == 1 ) {
+				const int K6_BUG_LOOP = 1000000;
+				int n;
+				void (*f_vide)(void);
+				unsigned long d, d2;
+				
+				printk(KERN_INFO "AMD K6 stepping B detected - ");
+				
+				/*
+				 * It looks like AMD fixed the 2.6.2 bug and improved indirect 
+				 * calls at the same time.
+				 */
+
+				n = K6_BUG_LOOP;
+				f_vide = vide;
+				rdtscl(d);
+				while (n--) 
+					f_vide();
+				rdtscl(d2);
+				d = d2-d;
+				
+				/* Knock these two lines out if it debugs out ok */
+				printk(KERN_INFO "AMD K6 stepping B detected - ");
+				/* -- cut here -- */
+				if (d > 20*K6_BUG_LOOP) 
+					printk("system stability may be impaired when more than 32 MB are used.\n");
+				else 
+					printk("probably OK (after B9730xxxx).\n");
+				printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
+			}
+
+			/* K6 with old style WHCR */
+			if (c->x86_model < 8 ||
+			   (c->x86_model== 8 && c->x86_mask < 8)) {
+				/* We can only write allocate on the low 508Mb */
+				if(mbytes>508)
+					mbytes=508;
+
+				rdmsr(MSR_K6_WHCR, l, h);
+				if ((l&0x0000FFFF)==0) {
+					unsigned long flags;
+					l=(1<<0)|((mbytes/4)<<1);
+					local_irq_save(flags);
+					wbinvd();
+					wrmsr(MSR_K6_WHCR, l, h);
+					local_irq_restore(flags);
+					printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+						mbytes);
+				}
+				break;
+			}
+
+			if ((c->x86_model == 8 && c->x86_mask >7) ||
+			     c->x86_model == 9 || c->x86_model == 13) {
+				/* The more serious chips .. */
+
+				if(mbytes>4092)
+					mbytes=4092;
+
+				rdmsr(MSR_K6_WHCR, l, h);
+				if ((l&0xFFFF0000)==0) {
+					unsigned long flags;
+					l=((mbytes>>2)<<22)|(1<<16);
+					local_irq_save(flags);
+					wbinvd();
+					wrmsr(MSR_K6_WHCR, l, h);
+					local_irq_restore(flags);
+					printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+						mbytes);
+				}
+
+				/*  Set MTRR capability flag if appropriate */
+				if (c->x86_model == 13 || c->x86_model == 9 ||
+				   (c->x86_model == 8 && c->x86_mask >= 8))
+					set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
+				break;
+			}
+			break;
+
+		case 6: /* An Athlon/Duron */
+ 
+			/* Bit 15 of Athlon specific MSR 15, needs to be 0
+ 			 * to enable SSE on Palomino/Morgan/Barton CPU's.
+			 * If the BIOS didn't enable it already, enable it here.
+			 */
+			if (c->x86_model >= 6 && c->x86_model <= 10) {
+				if (!cpu_has(c, X86_FEATURE_XMM)) {
+					printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+					rdmsr(MSR_K7_HWCR, l, h);
+					l &= ~0x00008000;
+					wrmsr(MSR_K7_HWCR, l, h);
+					set_bit(X86_FEATURE_XMM, c->x86_capability);
+				}
+			}
+
+			/* It's been determined by AMD that Athlons since model 8 stepping 1
+			 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
+			 * As per AMD technical note 27212 0.2
+			 */
+			if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) {
+				rdmsr(MSR_K7_CLK_CTL, l, h);
+				if ((l & 0xfff00000) != 0x20000000) {
+					printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
+						((l & 0x000fffff)|0x20000000));
+					wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
+				}
+			}
+			break;
+	}
+
+	switch (c->x86) {
+	case 15:
+		set_bit(X86_FEATURE_K8, c->x86_capability);
+		break;
+	case 6:
+		set_bit(X86_FEATURE_K7, c->x86_capability); 
+		break;
+	}
+
+	display_cacheinfo(c);
+	detect_ht(c);
+
+#ifdef CONFIG_X86_HT
+	/* AMD dual core looks like HT but isn't really. Hide it from the
+	   scheduler. This works around problems with the domain scheduler.
+	   Also probably gives slightly better scheduling and disables
+	   SMT nice which is harmful on dual core.
+	   TBD tune the domain scheduler for dual core. */
+	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+		smp_num_siblings = 1;
+#endif
+
+	if (cpuid_eax(0x80000000) >= 0x80000008) {
+		c->x86_num_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+		if (c->x86_num_cores & (c->x86_num_cores - 1))
+			c->x86_num_cores = 1;
+	}
+}
+
+static unsigned int amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+	/* AMD errata T13 (order #21922) */
+	if ((c->x86 == 6)) {
+		if (c->x86_model == 3 && c->x86_mask == 0)	/* Duron Rev A0 */
+			size = 64;
+		if (c->x86_model == 4 &&
+		    (c->x86_mask==0 || c->x86_mask==1))	/* Tbird rev A1/A2 */
+			size = 256;
+	}
+	return size;
+}
+
+static struct cpu_dev amd_cpu_dev __initdata = {
+	.c_vendor	= "AMD",
+	.c_ident 	= { "AuthenticAMD" },
+	.c_models = {
+		{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
+		  {
+			  [3] = "486 DX/2",
+			  [7] = "486 DX/2-WB",
+			  [8] = "486 DX/4", 
+			  [9] = "486 DX/4-WB", 
+			  [14] = "Am5x86-WT",
+			  [15] = "Am5x86-WB" 
+		  }
+		},
+	},
+	.c_init		= init_amd,
+	.c_identify	= generic_identify,
+	.c_size_cache	= amd_size_cache,
+};
+
+int __init amd_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(amd_init_cpu);
diff --git a/arch/i386/kernel/cpu/centaur.c b/arch/i386/kernel/cpu/centaur.c
new file mode 100644
index 000000000000..394814e57672
--- /dev/null
+++ b/arch/i386/kernel/cpu/centaur.c
@@ -0,0 +1,476 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/e820.h>
+#include "cpu.h"
+
+#ifdef CONFIG_X86_OOSTORE
+
+static u32 __init power2(u32 x)
+{
+	u32 s=1;
+	while(s<=x)
+		s<<=1;
+	return s>>=1;
+}
+
+
+/*
+ *	Set up an actual MCR
+ */
+ 
+static void __init centaur_mcr_insert(int reg, u32 base, u32 size, int key)
+{
+	u32 lo, hi;
+	
+	hi = base & ~0xFFF;
+	lo = ~(size-1);		/* Size is a power of 2 so this makes a mask */
+	lo &= ~0xFFF;		/* Remove the ctrl value bits */
+	lo |= key;		/* Attribute we wish to set */
+	wrmsr(reg+MSR_IDT_MCR0, lo, hi);
+	mtrr_centaur_report_mcr(reg, lo, hi);	/* Tell the mtrr driver */
+}
+
+/*
+ *	Figure what we can cover with MCR's
+ *
+ *	Shortcut: We know you can't put 4Gig of RAM on a winchip
+ */
+
+static u32 __init ramtop(void)		/* 16388 */
+{
+	int i;
+	u32 top = 0;
+	u32 clip = 0xFFFFFFFFUL;
+	
+	for (i = 0; i < e820.nr_map; i++) {
+		unsigned long start, end;
+
+		if (e820.map[i].addr > 0xFFFFFFFFUL)
+			continue;
+		/*
+		 *	Don't MCR over reserved space. Ignore the ISA hole
+		 *	we frob around that catastrophy already
+		 */
+		 			
+		if (e820.map[i].type == E820_RESERVED)
+		{
+			if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
+				clip = e820.map[i].addr;
+			continue;
+		}
+		start = e820.map[i].addr;
+		end = e820.map[i].addr + e820.map[i].size;
+		if (start >= end)
+			continue;
+		if (end > top)
+			top = end;
+	}
+	/* Everything below 'top' should be RAM except for the ISA hole.
+	   Because of the limited MCR's we want to map NV/ACPI into our
+	   MCR range for gunk in RAM 
+	   
+	   Clip might cause us to MCR insufficient RAM but that is an
+	   acceptable failure mode and should only bite obscure boxes with
+	   a VESA hole at 15Mb
+	   
+	   The second case Clip sometimes kicks in is when the EBDA is marked
+	   as reserved. Again we fail safe with reasonable results
+	*/
+	
+	if(top>clip)
+		top=clip;
+		
+	return top;
+}
+
+/*
+ *	Compute a set of MCR's to give maximum coverage
+ */
+
+static int __init centaur_mcr_compute(int nr, int key)
+{
+	u32 mem = ramtop();
+	u32 root = power2(mem);
+	u32 base = root;
+	u32 top = root;
+	u32 floor = 0;
+	int ct = 0;
+	
+	while(ct<nr)
+	{
+		u32 fspace = 0;
+
+		/*
+		 *	Find the largest block we will fill going upwards
+		 */
+
+		u32 high = power2(mem-top);	
+
+		/*
+		 *	Find the largest block we will fill going downwards
+		 */
+
+		u32 low = base/2;
+
+		/*
+		 *	Don't fill below 1Mb going downwards as there
+		 *	is an ISA hole in the way.
+		 */		
+		 
+		if(base <= 1024*1024)
+			low = 0;
+			
+		/*
+		 *	See how much space we could cover by filling below
+		 *	the ISA hole
+		 */
+		 
+		if(floor == 0)
+			fspace = 512*1024;
+		else if(floor ==512*1024)
+			fspace = 128*1024;
+
+		/* And forget ROM space */
+		
+		/*
+		 *	Now install the largest coverage we get
+		 */
+		 
+		if(fspace > high && fspace > low)
+		{
+			centaur_mcr_insert(ct, floor, fspace, key);
+			floor += fspace;
+		}
+		else if(high > low)
+		{
+			centaur_mcr_insert(ct, top, high, key);
+			top += high;
+		}
+		else if(low > 0)
+		{
+			base -= low;
+			centaur_mcr_insert(ct, base, low, key);
+		}
+		else break;
+		ct++;
+	}
+	/*
+	 *	We loaded ct values. We now need to set the mask. The caller
+	 *	must do this bit.
+	 */
+	 
+	return ct;
+}
+
+static void __init centaur_create_optimal_mcr(void)
+{
+	int i;
+	/*
+	 *	Allocate up to 6 mcrs to mark as much of ram as possible
+	 *	as write combining and weak write ordered.
+	 *
+	 *	To experiment with: Linux never uses stack operations for 
+	 *	mmio spaces so we could globally enable stack operation wc
+	 *
+	 *	Load the registers with type 31 - full write combining, all
+	 *	writes weakly ordered.
+	 */
+	int used = centaur_mcr_compute(6, 31);
+
+	/*
+	 *	Wipe unused MCRs
+	 */
+	 
+	for(i=used;i<8;i++)
+		wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+static void __init winchip2_create_optimal_mcr(void)
+{
+	u32 lo, hi;
+	int i;
+
+	/*
+	 *	Allocate up to 6 mcrs to mark as much of ram as possible
+	 *	as write combining, weak store ordered.
+	 *
+	 *	Load the registers with type 25
+	 *		8	-	weak write ordering
+	 *		16	-	weak read ordering
+	 *		1	-	write combining
+	 */
+
+	int used = centaur_mcr_compute(6, 25);
+	
+	/*
+	 *	Mark the registers we are using.
+	 */
+	 
+	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+	for(i=0;i<used;i++)
+		lo|=1<<(9+i);
+	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+	
+	/*
+	 *	Wipe unused MCRs
+	 */
+	 
+	for(i=used;i<8;i++)
+		wrmsr(MSR_IDT_MCR0+i, 0, 0);
+}
+
+/*
+ *	Handle the MCR key on the Winchip 2.
+ */
+
+static void __init winchip2_unprotect_mcr(void)
+{
+	u32 lo, hi;
+	u32 key;
+	
+	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+	lo&=~0x1C0;	/* blank bits 8-6 */
+	key = (lo>>17) & 7;
+	lo |= key<<6;	/* replace with unlock key */
+	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+
+static void __init winchip2_protect_mcr(void)
+{
+	u32 lo, hi;
+	
+	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+	lo&=~0x1C0;	/* blank bits 8-6 */
+	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+#endif /* CONFIG_X86_OOSTORE */
+
+#define ACE_PRESENT	(1 << 6)
+#define ACE_ENABLED	(1 << 7)
+#define ACE_FCR		(1 << 28)	/* MSR_VIA_FCR */
+
+#define RNG_PRESENT	(1 << 2)
+#define RNG_ENABLED	(1 << 3)
+#define RNG_ENABLE	(1 << 6)	/* MSR_VIA_RNG */
+
+static void __init init_c3(struct cpuinfo_x86 *c)
+{
+	u32  lo, hi;
+
+	/* Test for Centaur Extended Feature Flags presence */
+	if (cpuid_eax(0xC0000000) >= 0xC0000001) {
+		u32 tmp = cpuid_edx(0xC0000001);
+
+		/* enable ACE unit, if present and disabled */
+		if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) {
+			rdmsr (MSR_VIA_FCR, lo, hi);
+			lo |= ACE_FCR;		/* enable ACE unit */
+			wrmsr (MSR_VIA_FCR, lo, hi);
+			printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n");
+		}
+
+		/* enable RNG unit, if present and disabled */
+		if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) {
+			rdmsr (MSR_VIA_RNG, lo, hi);
+			lo |= RNG_ENABLE;	/* enable RNG unit */
+			wrmsr (MSR_VIA_RNG, lo, hi);
+			printk(KERN_INFO "CPU: Enabled h/w RNG\n");
+		}
+
+		/* store Centaur Extended Feature Flags as
+		 * word 5 of the CPU capability bit array
+		 */
+		c->x86_capability[5] = cpuid_edx(0xC0000001);
+	}
+
+	/* Cyrix III family needs CX8 & PGE explicity enabled. */
+	if (c->x86_model >=6 && c->x86_model <= 9) {
+		rdmsr (MSR_VIA_FCR, lo, hi);
+		lo |= (1<<1 | 1<<7);
+		wrmsr (MSR_VIA_FCR, lo, hi);
+		set_bit(X86_FEATURE_CX8, c->x86_capability);
+	}
+
+	/* Before Nehemiah, the C3's had 3dNOW! */
+	if (c->x86_model >=6 && c->x86_model <9)
+		set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+
+	get_model_name(c);
+	display_cacheinfo(c);
+}
+
+static void __init init_centaur(struct cpuinfo_x86 *c)
+{
+	enum {
+		ECX8=1<<1,
+		EIERRINT=1<<2,
+		DPM=1<<3,
+		DMCE=1<<4,
+		DSTPCLK=1<<5,
+		ELINEAR=1<<6,
+		DSMC=1<<7,
+		DTLOCK=1<<8,
+		EDCTLB=1<<8,
+		EMMX=1<<9,
+		DPDC=1<<11,
+		EBRPRED=1<<12,
+		DIC=1<<13,
+		DDC=1<<14,
+		DNA=1<<15,
+		ERETSTK=1<<16,
+		E2MMX=1<<19,
+		EAMD3D=1<<20,
+	};
+
+	char *name;
+	u32  fcr_set=0;
+	u32  fcr_clr=0;
+	u32  lo,hi,newlo;
+	u32  aa,bb,cc,dd;
+
+	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+	clear_bit(0*32+31, c->x86_capability);
+
+	switch (c->x86) {
+
+		case 5:
+			switch(c->x86_model) {
+			case 4:
+				name="C6";
+				fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
+				fcr_clr=DPDC;
+				printk(KERN_NOTICE "Disabling bugged TSC.\n");
+				clear_bit(X86_FEATURE_TSC, c->x86_capability);
+#ifdef CONFIG_X86_OOSTORE
+				centaur_create_optimal_mcr();
+				/* Enable
+					write combining on non-stack, non-string
+					write combining on string, all types
+					weak write ordering 
+					
+				   The C6 original lacks weak read order 
+				   
+				   Note 0x120 is write only on Winchip 1 */
+				   
+				wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
+#endif				
+				break;
+			case 8:
+				switch(c->x86_mask) {
+				default:
+					name="2";
+					break;
+				case 7 ... 9:
+					name="2A";
+					break;
+				case 10 ... 15:
+					name="2B";
+					break;
+				}
+				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+				fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+				winchip2_unprotect_mcr();
+				winchip2_create_optimal_mcr();
+				rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+				/* Enable
+					write combining on non-stack, non-string
+					write combining on string, all types
+					weak write ordering 
+				*/
+				lo|=31;				
+				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+				winchip2_protect_mcr();
+#endif
+				break;
+			case 9:
+				name="3";
+				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+				fcr_clr=DPDC;
+#ifdef CONFIG_X86_OOSTORE
+				winchip2_unprotect_mcr();
+				winchip2_create_optimal_mcr();
+				rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+				/* Enable
+					write combining on non-stack, non-string
+					write combining on string, all types
+					weak write ordering 
+				*/
+				lo|=31;				
+				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+				winchip2_protect_mcr();
+#endif
+				break;
+			case 10:
+				name="4";
+				/* no info on the WC4 yet */
+				break;
+			default:
+				name="??";
+			}
+
+			rdmsr(MSR_IDT_FCR1, lo, hi);
+			newlo=(lo|fcr_set) & (~fcr_clr);
+
+			if (newlo!=lo) {
+				printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
+				wrmsr(MSR_IDT_FCR1, newlo, hi );
+			} else {
+				printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
+			}
+			/* Emulate MTRRs using Centaur's MCR. */
+			set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
+			/* Report CX8 */
+			set_bit(X86_FEATURE_CX8, c->x86_capability);
+			/* Set 3DNow! on Winchip 2 and above. */
+			if (c->x86_model >=8)
+				set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+			/* See if we can find out some more. */
+			if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
+				/* Yes, we can. */
+				cpuid(0x80000005,&aa,&bb,&cc,&dd);
+				/* Add L1 data and code cache sizes. */
+				c->x86_cache_size = (cc>>24)+(dd>>24);
+			}
+			sprintf( c->x86_model_id, "WinChip %s", name );
+			break;
+
+		case 6:
+			init_c3(c);
+			break;
+	}
+}
+
+static unsigned int centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+	/* VIA C3 CPUs (670-68F) need further shifting. */
+	if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
+		size >>= 8;
+
+	/* VIA also screwed up Nehemiah stepping 1, and made
+	   it return '65KB' instead of '64KB'
+	   - Note, it seems this may only be in engineering samples. */
+	if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65))
+		size -=1;
+
+	return size;
+}
+
+static struct cpu_dev centaur_cpu_dev __initdata = {
+	.c_vendor	= "Centaur",
+	.c_ident	= { "CentaurHauls" },
+	.c_init		= init_centaur,
+	.c_size_cache	= centaur_size_cache,
+};
+
+int __init centaur_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_CENTAUR] = &centaur_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(centaur_init_cpu);
diff --git a/arch/i386/kernel/cpu/changelog b/arch/i386/kernel/cpu/changelog
new file mode 100644
index 000000000000..cef76b80a710
--- /dev/null
+++ b/arch/i386/kernel/cpu/changelog
@@ -0,0 +1,63 @@
+/*
+ *  Enhanced CPU type detection by Mike Jagdis, Patrick St. Jean
+ *  and Martin Mares, November 1997.
+ *
+ *  Force Cyrix 6x86(MX) and M II processors to report MTRR capability
+ *  and Cyrix "coma bug" recognition by
+ *  Zoltán Böszörményi <zboszor@mail.externet.hu> February 1999.
+ * 
+ *  Force Centaur C6 processors to report MTRR capability.
+ *  Bart Hartgers <bart@etpmod.phys.tue.nl>, May 1999.
+ *
+ *  Intel Mobile Pentium II detection fix. Sean Gilley, June 1999.
+ *
+ *  IDT Winchip tweaks, misc clean ups.
+ *  Dave Jones <davej@suse.de>, August 1999
+ *
+ *  Better detection of Centaur/IDT WinChip models.
+ *  Bart Hartgers <bart@etpmod.phys.tue.nl>, August 1999.
+ *
+ *  Cleaned up cache-detection code
+ *  Dave Jones <davej@suse.de>, October 1999
+ *
+ *  Added proper L2 cache detection for Coppermine
+ *  Dragan Stancevic <visitor@valinux.com>, October 1999
+ *
+ *  Added the original array for capability flags but forgot to credit 
+ *  myself :) (~1998) Fixed/cleaned up some cpu_model_info and other stuff
+ *  Jauder Ho <jauderho@carumba.com>, January 2000
+ *
+ *  Detection for Celeron coppermine, identify_cpu() overhauled,
+ *  and a few other clean ups.
+ *  Dave Jones <davej@suse.de>, April 2000
+ *
+ *  Pentium III FXSR, SSE support
+ *  General FPU state handling cleanups
+ *  Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ *  Added proper Cascades CPU and L2 cache detection for Cascades
+ *  and 8-way type cache happy bunch from Intel:^)
+ *  Dragan Stancevic <visitor@valinux.com>, May 2000 
+ *
+ *  Forward port AMD Duron errata T13 from 2.2.17pre
+ *  Dave Jones <davej@suse.de>, August 2000
+ *
+ *  Forward port lots of fixes/improvements from 2.2.18pre
+ *  Cyrix III, Pentium IV support.
+ *  Dave Jones <davej@suse.de>, October 2000
+ *
+ *  Massive cleanup of CPU detection and bug handling;
+ *  Transmeta CPU detection,
+ *  H. Peter Anvin <hpa@zytor.com>, November 2000
+ *
+ *  VIA C3 Support.
+ *  Dave Jones <davej@suse.de>, March 2001
+ *
+ *  AMD Athlon/Duron/Thunderbird bluesmoke support.
+ *  Dave Jones <davej@suse.de>, April 2001.
+ *
+ *  CacheSize bug workaround updates for AMD, Intel & VIA Cyrix.
+ *  Dave Jones <davej@suse.de>, September, October 2001.
+ *
+ */
+
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
new file mode 100644
index 000000000000..ebd5d8247faa
--- /dev/null
+++ b/arch/i386/kernel/cpu/common.c
@@ -0,0 +1,634 @@
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+#endif
+
+#include "cpu.h"
+
+DEFINE_PER_CPU(struct desc_struct, cpu_gdt_table[GDT_ENTRIES]);
+EXPORT_PER_CPU_SYMBOL(cpu_gdt_table);
+
+DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
+EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
+
+static int cachesize_override __initdata = -1;
+static int disable_x86_fxsr __initdata = 0;
+static int disable_x86_serial_nr __initdata = 1;
+
+struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
+
+extern void mcheck_init(struct cpuinfo_x86 *c);
+
+extern int disable_pse;
+
+static void default_init(struct cpuinfo_x86 * c)
+{
+	/* Not much we can do here... */
+	/* Check if at least it has cpuid */
+	if (c->cpuid_level == -1) {
+		/* No cpuid. It must be an ancient CPU */
+		if (c->x86 == 4)
+			strcpy(c->x86_model_id, "486");
+		else if (c->x86 == 3)
+			strcpy(c->x86_model_id, "386");
+	}
+}
+
+static struct cpu_dev default_cpu = {
+	.c_init	= default_init,
+};
+static struct cpu_dev * this_cpu = &default_cpu;
+
+static int __init cachesize_setup(char *str)
+{
+	get_option (&str, &cachesize_override);
+	return 1;
+}
+__setup("cachesize=", cachesize_setup);
+
+int __init get_model_name(struct cpuinfo_x86 *c)
+{
+	unsigned int *v;
+	char *p, *q;
+
+	if (cpuid_eax(0x80000000) < 0x80000004)
+		return 0;
+
+	v = (unsigned int *) c->x86_model_id;
+	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
+	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
+	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
+	c->x86_model_id[48] = 0;
+
+	/* Intel chips right-justify this string for some dumb reason;
+	   undo that brain damage */
+	p = q = &c->x86_model_id[0];
+	while ( *p == ' ' )
+	     p++;
+	if ( p != q ) {
+	     while ( *p )
+		  *q++ = *p++;
+	     while ( q <= &c->x86_model_id[48] )
+		  *q++ = '\0';	/* Zero-pad the rest */
+	}
+
+	return 1;
+}
+
+
+void __init display_cacheinfo(struct cpuinfo_x86 *c)
+{
+	unsigned int n, dummy, ecx, edx, l2size;
+
+	n = cpuid_eax(0x80000000);
+
+	if (n >= 0x80000005) {
+		cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
+		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
+			edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+		c->x86_cache_size=(ecx>>24)+(edx>>24);	
+	}
+
+	if (n < 0x80000006)	/* Some chips just has a large L1. */
+		return;
+
+	ecx = cpuid_ecx(0x80000006);
+	l2size = ecx >> 16;
+	
+	/* do processor-specific cache resizing */
+	if (this_cpu->c_size_cache)
+		l2size = this_cpu->c_size_cache(c,l2size);
+
+	/* Allow user to override all this if necessary. */
+	if (cachesize_override != -1)
+		l2size = cachesize_override;
+
+	if ( l2size == 0 )
+		return;		/* Again, no L2 cache is possible */
+
+	c->x86_cache_size = l2size;
+
+	printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
+	       l2size, ecx & 0xFF);
+}
+
+/* Naming convention should be: <Name> [(<Codename>)] */
+/* This table only is used unless init_<vendor>() below doesn't set it; */
+/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
+
+/* Look up CPU names by table lookup. */
+static char __init *table_lookup_model(struct cpuinfo_x86 *c)
+{
+	struct cpu_model_info *info;
+
+	if ( c->x86_model >= 16 )
+		return NULL;	/* Range check */
+
+	if (!this_cpu)
+		return NULL;
+
+	info = this_cpu->c_models;
+
+	while (info && info->family) {
+		if (info->family == c->x86)
+			return info->model_names[c->x86_model];
+		info++;
+	}
+	return NULL;		/* Not found */
+}
+
+
+void __init get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+{
+	char *v = c->x86_vendor_id;
+	int i;
+
+	for (i = 0; i < X86_VENDOR_NUM; i++) {
+		if (cpu_devs[i]) {
+			if (!strcmp(v,cpu_devs[i]->c_ident[0]) ||
+			    (cpu_devs[i]->c_ident[1] && 
+			     !strcmp(v,cpu_devs[i]->c_ident[1]))) {
+				c->x86_vendor = i;
+				if (!early)
+					this_cpu = cpu_devs[i];
+				break;
+			}
+		}
+	}
+}
+
+
+static int __init x86_fxsr_setup(char * s)
+{
+	disable_x86_fxsr = 1;
+	return 1;
+}
+__setup("nofxsr", x86_fxsr_setup);
+
+
+/* Standard macro to see if a specific flag is changeable */
+static inline int flag_is_changeable_p(u32 flag)
+{
+	u32 f1, f2;
+
+	asm("pushfl\n\t"
+	    "pushfl\n\t"
+	    "popl %0\n\t"
+	    "movl %0,%1\n\t"
+	    "xorl %2,%0\n\t"
+	    "pushl %0\n\t"
+	    "popfl\n\t"
+	    "pushfl\n\t"
+	    "popl %0\n\t"
+	    "popfl\n\t"
+	    : "=&r" (f1), "=&r" (f2)
+	    : "ir" (flag));
+
+	return ((f1^f2) & flag) != 0;
+}
+
+
+/* Probe for the CPUID instruction */
+static int __init have_cpuid_p(void)
+{
+	return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+/* Do minimum CPU detection early.
+   Fields really needed: vendor, cpuid_level, family, model, mask, cache alignment.
+   The others are not touched to avoid unwanted side effects. */
+static void __init early_cpu_detect(void)
+{
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	c->x86_cache_alignment = 32;
+
+	if (!have_cpuid_p())
+		return;
+
+	/* Get vendor name */
+	cpuid(0x00000000, &c->cpuid_level,
+	      (int *)&c->x86_vendor_id[0],
+	      (int *)&c->x86_vendor_id[8],
+	      (int *)&c->x86_vendor_id[4]);
+
+	get_cpu_vendor(c, 1);
+
+	c->x86 = 4;
+	if (c->cpuid_level >= 0x00000001) {
+		u32 junk, tfms, cap0, misc;
+		cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
+		c->x86 = (tfms >> 8) & 15;
+		c->x86_model = (tfms >> 4) & 15;
+		if (c->x86 == 0xf) {
+			c->x86 += (tfms >> 20) & 0xff;
+			c->x86_model += ((tfms >> 16) & 0xF) << 4;
+		}
+		c->x86_mask = tfms & 15;
+		if (cap0 & (1<<19))
+			c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
+	}
+
+	early_intel_workaround(c);
+}
+
+void __init generic_identify(struct cpuinfo_x86 * c)
+{
+	u32 tfms, xlvl;
+	int junk;
+
+	if (have_cpuid_p()) {
+		/* Get vendor name */
+		cpuid(0x00000000, &c->cpuid_level,
+		      (int *)&c->x86_vendor_id[0],
+		      (int *)&c->x86_vendor_id[8],
+		      (int *)&c->x86_vendor_id[4]);
+		
+		get_cpu_vendor(c, 0);
+		/* Initialize the standard set of capabilities */
+		/* Note that the vendor-specific code below might override */
+	
+		/* Intel-defined flags: level 0x00000001 */
+		if ( c->cpuid_level >= 0x00000001 ) {
+			u32 capability, excap;
+			cpuid(0x00000001, &tfms, &junk, &excap, &capability);
+			c->x86_capability[0] = capability;
+			c->x86_capability[4] = excap;
+			c->x86 = (tfms >> 8) & 15;
+			c->x86_model = (tfms >> 4) & 15;
+			if (c->x86 == 0xf) {
+				c->x86 += (tfms >> 20) & 0xff;
+				c->x86_model += ((tfms >> 16) & 0xF) << 4;
+			} 
+			c->x86_mask = tfms & 15;
+		} else {
+			/* Have CPUID level 0 only - unheard of */
+			c->x86 = 4;
+		}
+
+		/* AMD-defined flags: level 0x80000001 */
+		xlvl = cpuid_eax(0x80000000);
+		if ( (xlvl & 0xffff0000) == 0x80000000 ) {
+			if ( xlvl >= 0x80000001 ) {
+				c->x86_capability[1] = cpuid_edx(0x80000001);
+				c->x86_capability[6] = cpuid_ecx(0x80000001);
+			}
+			if ( xlvl >= 0x80000004 )
+				get_model_name(c); /* Default name */
+		}
+	}
+}
+
+static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+	if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
+		/* Disable processor serial number */
+		unsigned long lo,hi;
+		rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+		lo |= 0x200000;
+		wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+		printk(KERN_NOTICE "CPU serial number disabled.\n");
+		clear_bit(X86_FEATURE_PN, c->x86_capability);
+
+		/* Disabling the serial number may affect the cpuid level */
+		c->cpuid_level = cpuid_eax(0);
+	}
+}
+
+static int __init x86_serial_nr_setup(char *s)
+{
+	disable_x86_serial_nr = 0;
+	return 1;
+}
+__setup("serialnumber", x86_serial_nr_setup);
+
+
+
+/*
+ * This does the hard work of actually picking apart the CPU stuff...
+ */
+void __init identify_cpu(struct cpuinfo_x86 *c)
+{
+	int i;
+
+	c->loops_per_jiffy = loops_per_jiffy;
+	c->x86_cache_size = -1;
+	c->x86_vendor = X86_VENDOR_UNKNOWN;
+	c->cpuid_level = -1;	/* CPUID not detected */
+	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
+	c->x86_vendor_id[0] = '\0'; /* Unset */
+	c->x86_model_id[0] = '\0';  /* Unset */
+	c->x86_num_cores = 1;
+	memset(&c->x86_capability, 0, sizeof c->x86_capability);
+
+	if (!have_cpuid_p()) {
+		/* First of all, decide if this is a 486 or higher */
+		/* It's a 486 if we can modify the AC flag */
+		if ( flag_is_changeable_p(X86_EFLAGS_AC) )
+			c->x86 = 4;
+		else
+			c->x86 = 3;
+	}
+
+	generic_identify(c);
+
+	printk(KERN_DEBUG "CPU: After generic identify, caps:");
+	for (i = 0; i < NCAPINTS; i++)
+		printk(" %08lx", c->x86_capability[i]);
+	printk("\n");
+
+	if (this_cpu->c_identify) {
+		this_cpu->c_identify(c);
+
+		printk(KERN_DEBUG "CPU: After vendor identify, caps:");
+		for (i = 0; i < NCAPINTS; i++)
+			printk(" %08lx", c->x86_capability[i]);
+		printk("\n");
+	}
+
+	/*
+	 * Vendor-specific initialization.  In this section we
+	 * canonicalize the feature flags, meaning if there are
+	 * features a certain CPU supports which CPUID doesn't
+	 * tell us, CPUID claiming incorrect flags, or other bugs,
+	 * we handle them here.
+	 *
+	 * At the end of this section, c->x86_capability better
+	 * indicate the features this CPU genuinely supports!
+	 */
+	if (this_cpu->c_init)
+		this_cpu->c_init(c);
+
+	/* Disable the PN if appropriate */
+	squash_the_stupid_serial_number(c);
+
+	/*
+	 * The vendor-specific functions might have changed features.  Now
+	 * we do "generic changes."
+	 */
+
+	/* TSC disabled? */
+	if ( tsc_disable )
+		clear_bit(X86_FEATURE_TSC, c->x86_capability);
+
+	/* FXSR disabled? */
+	if (disable_x86_fxsr) {
+		clear_bit(X86_FEATURE_FXSR, c->x86_capability);
+		clear_bit(X86_FEATURE_XMM, c->x86_capability);
+	}
+
+	if (disable_pse)
+		clear_bit(X86_FEATURE_PSE, c->x86_capability);
+
+	/* If the model name is still unset, do table lookup. */
+	if ( !c->x86_model_id[0] ) {
+		char *p;
+		p = table_lookup_model(c);
+		if ( p )
+			strcpy(c->x86_model_id, p);
+		else
+			/* Last resort... */
+			sprintf(c->x86_model_id, "%02x/%02x",
+				c->x86_vendor, c->x86_model);
+	}
+
+	/* Now the feature flags better reflect actual CPU features! */
+
+	printk(KERN_DEBUG "CPU: After all inits, caps:");
+	for (i = 0; i < NCAPINTS; i++)
+		printk(" %08lx", c->x86_capability[i]);
+	printk("\n");
+
+	/*
+	 * On SMP, boot_cpu_data holds the common feature set between
+	 * all CPUs; so make sure that we indicate which features are
+	 * common between the CPUs.  The first time this routine gets
+	 * executed, c == &boot_cpu_data.
+	 */
+	if ( c != &boot_cpu_data ) {
+		/* AND the already accumulated flags with these */
+		for ( i = 0 ; i < NCAPINTS ; i++ )
+			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
+	}
+
+	/* Init Machine Check Exception if available. */
+#ifdef CONFIG_X86_MCE
+	mcheck_init(c);
+#endif
+}
+
+#ifdef CONFIG_X86_HT
+void __init detect_ht(struct cpuinfo_x86 *c)
+{
+	u32 	eax, ebx, ecx, edx;
+	int 	index_lsb, index_msb, tmp;
+	int 	cpu = smp_processor_id();
+
+	if (!cpu_has(c, X86_FEATURE_HT))
+		return;
+
+	cpuid(1, &eax, &ebx, &ecx, &edx);
+	smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+	if (smp_num_siblings == 1) {
+		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
+	} else if (smp_num_siblings > 1 ) {
+		index_lsb = 0;
+		index_msb = 31;
+
+		if (smp_num_siblings > NR_CPUS) {
+			printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
+			smp_num_siblings = 1;
+			return;
+		}
+		tmp = smp_num_siblings;
+		while ((tmp & 1) == 0) {
+			tmp >>=1 ;
+			index_lsb++;
+		}
+		tmp = smp_num_siblings;
+		while ((tmp & 0x80000000 ) == 0) {
+			tmp <<=1 ;
+			index_msb--;
+		}
+		if (index_lsb != index_msb )
+			index_msb++;
+		phys_proc_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
+
+		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+		       phys_proc_id[cpu]);
+	}
+}
+#endif
+
+void __init print_cpu_info(struct cpuinfo_x86 *c)
+{
+	char *vendor = NULL;
+
+	if (c->x86_vendor < X86_VENDOR_NUM)
+		vendor = this_cpu->c_vendor;
+	else if (c->cpuid_level >= 0)
+		vendor = c->x86_vendor_id;
+
+	if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
+		printk("%s ", vendor);
+
+	if (!c->x86_model_id[0])
+		printk("%d86", c->x86);
+	else
+		printk("%s", c->x86_model_id);
+
+	if (c->x86_mask || c->cpuid_level >= 0) 
+		printk(" stepping %02x\n", c->x86_mask);
+	else
+		printk("\n");
+}
+
+cpumask_t cpu_initialized __initdata = CPU_MASK_NONE;
+
+/* This is hacky. :)
+ * We're emulating future behavior.
+ * In the future, the cpu-specific init functions will be called implicitly
+ * via the magic of initcalls.
+ * They will insert themselves into the cpu_devs structure.
+ * Then, when cpu_init() is called, we can just iterate over that array.
+ */
+
+extern int intel_cpu_init(void);
+extern int cyrix_init_cpu(void);
+extern int nsc_init_cpu(void);
+extern int amd_init_cpu(void);
+extern int centaur_init_cpu(void);
+extern int transmeta_init_cpu(void);
+extern int rise_init_cpu(void);
+extern int nexgen_init_cpu(void);
+extern int umc_init_cpu(void);
+
+void __init early_cpu_init(void)
+{
+	intel_cpu_init();
+	cyrix_init_cpu();
+	nsc_init_cpu();
+	amd_init_cpu();
+	centaur_init_cpu();
+	transmeta_init_cpu();
+	rise_init_cpu();
+	nexgen_init_cpu();
+	umc_init_cpu();
+	early_cpu_detect();
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	/* pse is not compatible with on-the-fly unmapping,
+	 * disable it even if the cpus claim to support it.
+	 */
+	clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+	disable_pse = 1;
+#endif
+}
+/*
+ * cpu_init() initializes state that is per-CPU. Some data is already
+ * initialized (naturally) in the bootstrap process, such as the GDT
+ * and IDT. We reload them nevertheless, this function acts as a
+ * 'CPU state barrier', nothing should get across.
+ */
+void __init cpu_init (void)
+{
+	int cpu = smp_processor_id();
+	struct tss_struct * t = &per_cpu(init_tss, cpu);
+	struct thread_struct *thread = &current->thread;
+	__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
+
+	if (cpu_test_and_set(cpu, cpu_initialized)) {
+		printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
+		for (;;) local_irq_enable();
+	}
+	printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+
+	if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
+		clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+	if (tsc_disable && cpu_has_tsc) {
+		printk(KERN_NOTICE "Disabling TSC...\n");
+		/**** FIX-HPA: DOES THIS REALLY BELONG HERE? ****/
+		clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability);
+		set_in_cr4(X86_CR4_TSD);
+	}
+
+	/*
+	 * Initialize the per-CPU GDT with the boot GDT,
+	 * and set up the GDT descriptor:
+	 */
+	memcpy(&per_cpu(cpu_gdt_table, cpu), cpu_gdt_table,
+	       GDT_SIZE);
+
+	/* Set up GDT entry for 16bit stack */
+	*(__u64 *)&(per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_ESPFIX_SS]) |=
+		((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) |
+		((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
+		(CPU_16BIT_STACK_SIZE - 1);
+
+	cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
+	cpu_gdt_descr[cpu].address =
+	    (unsigned long)&per_cpu(cpu_gdt_table, cpu);
+
+	/*
+	 * Set up the per-thread TLS descriptor cache:
+	 */
+	memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu),
+		GDT_ENTRY_TLS_ENTRIES * 8);
+
+	__asm__ __volatile__("lgdt %0" : : "m" (cpu_gdt_descr[cpu]));
+	__asm__ __volatile__("lidt %0" : : "m" (idt_descr));
+
+	/*
+	 * Delete NT
+	 */
+	__asm__("pushfl ; andl $0xffffbfff,(%esp) ; popfl");
+
+	/*
+	 * Set up and load the per-CPU TSS and LDT
+	 */
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+	if (current->mm)
+		BUG();
+	enter_lazy_tlb(&init_mm, current);
+
+	load_esp0(t, thread);
+	set_tss_desc(cpu,t);
+	load_TR_desc();
+	load_LDT(&init_mm.context);
+
+	/* Set up doublefault TSS pointer in the GDT */
+	__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
+
+	/* Clear %fs and %gs. */
+	asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
+
+	/* Clear all 6 debug registers: */
+
+#define CD(register) __asm__("movl %0,%%db" #register ::"r"(0) );
+
+	CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
+
+#undef CD
+
+	/*
+	 * Force FPU initialization:
+	 */
+	current_thread_info()->status = 0;
+	clear_used_math();
+	mxcsr_feature_mask_init();
+}
diff --git a/arch/i386/kernel/cpu/cpu.h b/arch/i386/kernel/cpu/cpu.h
new file mode 100644
index 000000000000..5a1d4f163e84
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpu.h
@@ -0,0 +1,30 @@
+
+struct cpu_model_info {
+	int vendor;
+	int family;
+	char *model_names[16];
+};
+
+/* attempt to consolidate cpu attributes */
+struct cpu_dev {
+	char	* c_vendor;
+
+	/* some have two possibilities for cpuid string */
+	char	* c_ident[2];	
+
+	struct		cpu_model_info c_models[4];
+
+	void		(*c_init)(struct cpuinfo_x86 * c);
+	void		(*c_identify)(struct cpuinfo_x86 * c);
+	unsigned int	(*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
+};
+
+extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+
+extern int get_model_name(struct cpuinfo_x86 *c);
+extern void display_cacheinfo(struct cpuinfo_x86 *c);
+
+extern void generic_identify(struct cpuinfo_x86 * c);
+
+extern void early_intel_workaround(struct cpuinfo_x86 *c);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
new file mode 100644
index 000000000000..f25ffd74235c
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -0,0 +1,231 @@
+#
+# CPU Frequency scaling
+#
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+if CPU_FREQ
+
+comment "CPUFreq processor drivers"
+
+config X86_ACPI_CPUFREQ
+	tristate "ACPI Processor P-States driver"
+	select CPU_FREQ_TABLE
+	depends on ACPI_PROCESSOR
+	help
+	  This driver adds a CPUFreq driver which utilizes the ACPI
+	  Processor Performance States.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config ELAN_CPUFREQ
+	tristate "AMD Elan"
+	select CPU_FREQ_TABLE
+	depends on X86_ELAN
+	---help---
+	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
+	  processors.
+
+	  You need to specify the processor maximum speed as boot
+	  parameter: elanfreq=maxspeed (in kHz) or as module
+	  parameter "max_freq".
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_POWERNOW_K6
+	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
+	  AMD K6-3+ processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_POWERNOW_K7
+	tristate "AMD Mobile Athlon/Duron PowerNow!"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for mobile AMD K7 mobile processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_POWERNOW_K7_ACPI
+	bool
+	depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
+	depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+	default y
+
+config X86_POWERNOW_K8
+	tristate "AMD Opteron/Athlon64 PowerNow!"
+	select CPU_FREQ_TABLE
+	depends on EXPERIMENTAL
+	help
+	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_POWERNOW_K8_ACPI
+	bool
+	depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
+	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
+	default y
+
+config X86_GX_SUSPMOD
+	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+	help
+	 This add the CPUFreq driver for NatSemi Geode processors which
+	 support suspend modulation.
+
+	 For details, take a look at <file:Documentation/cpu-freq/>.
+
+	 If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO
+	tristate "Intel Enhanced SpeedStep"
+	select CPU_FREQ_TABLE
+	select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI)
+	help
+	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
+	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs. However,
+	  you also need to say Y to "Use ACPI tables to decode..." below
+	  [which might imply enabling ACPI] if you want to use this driver
+	  on non-Banias CPUs.
+	  
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+	  
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO_ACPI
+	bool "Use ACPI tables to decode valid frequency/voltage pairs"
+	depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
+	depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
+	default y
+	help
+	  Use primarily the information provided in the BIOS ACPI tables
+	  to determine valid CPU frequency and voltage pairings. It is
+	  required for the driver to work on non-Banias CPUs.
+
+	  If in doubt, say Y.
+
+config X86_SPEEDSTEP_CENTRINO_TABLE
+	bool "Built-in tables for Banias CPUs"
+	depends on X86_SPEEDSTEP_CENTRINO
+	default y
+	help
+	  Use built-in tables for Banias CPUs if ACPI encoding
+	  is not available.
+
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_ICH
+	tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for certain mobile Intel Pentium III
+	  (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
+	  mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, 
+	  ICH3 or ICH4 southbridge.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_SMI
+	tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
+	select CPU_FREQ_TABLE
+	depends on EXPERIMENTAL
+	help
+	  This adds the CPUFreq driver for certain mobile Intel Pentium III
+	  (Coppermine), all mobile Intel Pentium III-M (Tualatin)  
+	  on systems which have an Intel 440BX/ZX/MX southbridge.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_P4_CLOCKMOD
+	tristate "Intel Pentium 4 clock modulation"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for Intel Pentium 4 / XEON
+	  processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_CPUFREQ_NFORCE2
+	tristate "nVidia nForce2 FSB changing"
+	depends on EXPERIMENTAL
+	help
+	  This adds the CPUFreq driver for FSB changing on nVidia nForce2
+	  platforms.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_LONGRUN
+	tristate "Transmeta LongRun"
+	help
+	  This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
+	  which support LongRun.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+config X86_LONGHAUL
+	tristate "VIA Cyrix III Longhaul"
+	select CPU_FREQ_TABLE
+	help
+	  This adds the CPUFreq driver for VIA Samuel/CyrixIII, 
+	  VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T 
+	  processors.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+comment "shared options"
+
+config X86_ACPI_CPUFREQ_PROC_INTF
+        bool "/proc/acpi/processor/../performance interface (deprecated)"
+	depends on PROC_FS
+	depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
+	help
+	  This enables the deprecated /proc/acpi/processor/../performance 
+	  interface. While it is helpful for debugging, the generic,
+	  cross-architecture cpufreq interfaces should be used.
+
+	  If in doubt, say N.
+
+config X86_SPEEDSTEP_LIB
+	tristate
+	default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD
+
+config X86_SPEEDSTEP_RELAXED_CAP_CHECK
+	bool "Relaxed speedstep capability checks"
+	depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+	help
+	  Don't perform all checks for a speedstep capable system which would 
+	  normally be done. Some ancient or strange systems, though speedstep 
+	  capable, don't always indicate that they are speedstep capable. This 
+	  option lets the probing code bypass some of those checks if the
+	  parameter "relaxed_check=1" is passed to the module.
+
+endif	# CPU_FREQ
+
+endmenu
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
new file mode 100644
index 000000000000..a922e97aeedd
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -0,0 +1,14 @@
+obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
+obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
+obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
+obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
+obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
+obj-$(CONFIG_X86_LONGRUN)		+= longrun.o  
+obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
+obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
+obj-$(CONFIG_X86_SPEEDSTEP_LIB)		+= speedstep-lib.o
+obj-$(CONFIG_X86_SPEEDSTEP_SMI)		+= speedstep-smi.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o
+obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
+obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
new file mode 100644
index 000000000000..963e17aa205d
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -0,0 +1,537 @@
+/*
+ * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.3 $)
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+
+#include "speedstep-est-common.h"
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
+
+MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
+MODULE_DESCRIPTION("ACPI Processor P-States Driver");
+MODULE_LICENSE("GPL");
+
+
+struct cpufreq_acpi_io {
+	struct acpi_processor_performance	acpi_data;
+	struct cpufreq_frequency_table		*freq_table;
+	unsigned int				resume;
+};
+
+static struct cpufreq_acpi_io	*acpi_io_data[NR_CPUS];
+
+static struct cpufreq_driver acpi_cpufreq_driver;
+
+static int
+acpi_processor_write_port(
+	u16	port,
+	u8	bit_width,
+	u32	value)
+{
+	if (bit_width <= 8) {
+		outb(value, port);
+	} else if (bit_width <= 16) {
+		outw(value, port);
+	} else if (bit_width <= 32) {
+		outl(value, port);
+	} else {
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int
+acpi_processor_read_port(
+	u16	port,
+	u8	bit_width,
+	u32	*ret)
+{
+	*ret = 0;
+	if (bit_width <= 8) {
+		*ret = inb(port);
+	} else if (bit_width <= 16) {
+		*ret = inw(port);
+	} else if (bit_width <= 32) {
+		*ret = inl(port);
+	} else {
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int
+acpi_processor_set_performance (
+	struct cpufreq_acpi_io	*data,
+	unsigned int		cpu,
+	int			state)
+{
+	u16			port = 0;
+	u8			bit_width = 0;
+	int			ret = 0;
+	u32			value = 0;
+	int			i = 0;
+	struct cpufreq_freqs    cpufreq_freqs;
+	cpumask_t		saved_mask;
+	int			retval;
+
+	dprintk("acpi_processor_set_performance\n");
+
+	/*
+	 * TBD: Use something other than set_cpus_allowed.
+	 * As set_cpus_allowed is a bit racy, 
+	 * with any other set_cpus_allowed for this process.
+	 */
+	saved_mask = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	if (smp_processor_id() != cpu) {
+		return (-EAGAIN);
+	}
+	
+	if (state == data->acpi_data.state) {
+		if (unlikely(data->resume)) {
+			dprintk("Called after resume, resetting to P%d\n", state);
+			data->resume = 0;
+		} else {
+			dprintk("Already at target state (P%d)\n", state);
+			retval = 0;
+			goto migrate_end;
+		}
+	}
+
+	dprintk("Transitioning from P%d to P%d\n",
+		data->acpi_data.state, state);
+
+	/* cpufreq frequency struct */
+	cpufreq_freqs.cpu = cpu;
+	cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency;
+	cpufreq_freqs.new = data->freq_table[state].frequency;
+
+	/* notify cpufreq */
+	cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
+
+	/*
+	 * First we write the target state's 'control' value to the
+	 * control_register.
+	 */
+
+	port = data->acpi_data.control_register.address;
+	bit_width = data->acpi_data.control_register.bit_width;
+	value = (u32) data->acpi_data.states[state].control;
+
+	dprintk("Writing 0x%08x to port 0x%04x\n", value, port);
+
+	ret = acpi_processor_write_port(port, bit_width, value);
+	if (ret) {
+		dprintk("Invalid port width 0x%04x\n", bit_width);
+		retval = ret;
+		goto migrate_end;
+	}
+
+	/*
+	 * Then we read the 'status_register' and compare the value with the
+	 * target state's 'status' to make sure the transition was successful.
+	 * Note that we'll poll for up to 1ms (100 cycles of 10us) before
+	 * giving up.
+	 */
+
+	port = data->acpi_data.status_register.address;
+	bit_width = data->acpi_data.status_register.bit_width;
+
+	dprintk("Looking for 0x%08x from port 0x%04x\n",
+		(u32) data->acpi_data.states[state].status, port);
+
+	for (i=0; i<100; i++) {
+		ret = acpi_processor_read_port(port, bit_width, &value);
+		if (ret) {	
+			dprintk("Invalid port width 0x%04x\n", bit_width);
+			retval = ret;
+			goto migrate_end;
+		}
+		if (value == (u32) data->acpi_data.states[state].status)
+			break;
+		udelay(10);
+	}
+
+	/* notify cpufreq */
+	cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
+
+	if (value != (u32) data->acpi_data.states[state].status) {
+		unsigned int tmp = cpufreq_freqs.new;
+		cpufreq_freqs.new = cpufreq_freqs.old;
+		cpufreq_freqs.old = tmp;
+		cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
+		cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
+		printk(KERN_WARNING "acpi-cpufreq: Transition failed\n");
+		retval = -ENODEV;
+		goto migrate_end;
+	}
+
+	dprintk("Transition successful after %d microseconds\n", i * 10);
+
+	data->acpi_data.state = state;
+
+	retval = 0;
+migrate_end:
+	set_cpus_allowed(current, saved_mask);
+	return (retval);
+}
+
+
+static int
+acpi_cpufreq_target (
+	struct cpufreq_policy   *policy,
+	unsigned int target_freq,
+	unsigned int relation)
+{
+	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+	unsigned int next_state = 0;
+	unsigned int result = 0;
+
+	dprintk("acpi_cpufreq_setpolicy\n");
+
+	result = cpufreq_frequency_table_target(policy,
+			data->freq_table,
+			target_freq,
+			relation,
+			&next_state);
+	if (result)
+		return (result);
+
+	result = acpi_processor_set_performance (data, policy->cpu, next_state);
+
+	return (result);
+}
+
+
+static int
+acpi_cpufreq_verify (
+	struct cpufreq_policy   *policy)
+{
+	unsigned int result = 0;
+	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+	dprintk("acpi_cpufreq_verify\n");
+
+	result = cpufreq_frequency_table_verify(policy, 
+			data->freq_table);
+
+	return (result);
+}
+
+
+static unsigned long
+acpi_cpufreq_guess_freq (
+	struct cpufreq_acpi_io	*data,
+	unsigned int		cpu)
+{
+	if (cpu_khz) {
+		/* search the closest match to cpu_khz */
+		unsigned int i;
+		unsigned long freq;
+		unsigned long freqn = data->acpi_data.states[0].core_frequency * 1000;
+
+		for (i=0; i < (data->acpi_data.state_count - 1); i++) {
+			freq = freqn;
+			freqn = data->acpi_data.states[i+1].core_frequency * 1000;
+			if ((2 * cpu_khz) > (freqn + freq)) {
+				data->acpi_data.state = i;
+				return (freq);
+			}
+		}
+		data->acpi_data.state = data->acpi_data.state_count - 1;
+		return (freqn);
+	} else
+		/* assume CPU is at P0... */
+		data->acpi_data.state = 0;
+		return data->acpi_data.states[0].core_frequency * 1000;
+	
+}
+
+
+/* 
+ * acpi_processor_cpu_init_pdc_est - let BIOS know about the SMP capabilities
+ * of this driver
+ * @perf: processor-specific acpi_io_data struct
+ * @cpu: CPU being initialized
+ *
+ * To avoid issues with legacy OSes, some BIOSes require to be informed of
+ * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC 
+ * accordingly, for Enhanced Speedstep. Actual call to _PDC is done in
+ * driver/acpi/processor.c
+ */
+static void 
+acpi_processor_cpu_init_pdc_est(
+		struct acpi_processor_performance *perf, 
+		unsigned int cpu,
+		struct acpi_object_list *obj_list
+		)
+{
+	union acpi_object *obj;
+	u32 *buf;
+	struct cpuinfo_x86 *c = cpu_data + cpu;
+	dprintk("acpi_processor_cpu_init_pdc_est\n");
+
+	if (!cpu_has(c, X86_FEATURE_EST))
+		return;
+
+	/* Initialize pdc. It will be used later. */
+	if (!obj_list)
+		return;
+		
+	if (!(obj_list->count && obj_list->pointer))
+		return;
+
+	obj = obj_list->pointer;
+	if ((obj->buffer.length == 12) && obj->buffer.pointer) {
+		buf = (u32 *)obj->buffer.pointer;
+       		buf[0] = ACPI_PDC_REVISION_ID;
+       		buf[1] = 1;
+       		buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
+		perf->pdc = obj_list;
+	}
+	return;
+}
+ 
+
+/* CPU specific PDC initialization */
+static void 
+acpi_processor_cpu_init_pdc(
+		struct acpi_processor_performance *perf, 
+		unsigned int cpu,
+		struct acpi_object_list *obj_list
+		)
+{
+	struct cpuinfo_x86 *c = cpu_data + cpu;
+	dprintk("acpi_processor_cpu_init_pdc\n");
+	perf->pdc = NULL;
+	if (cpu_has(c, X86_FEATURE_EST))
+		acpi_processor_cpu_init_pdc_est(perf, cpu, obj_list);
+	return;
+}
+
+
+static int
+acpi_cpufreq_cpu_init (
+	struct cpufreq_policy   *policy)
+{
+	unsigned int		i;
+	unsigned int		cpu = policy->cpu;
+	struct cpufreq_acpi_io	*data;
+	unsigned int		result = 0;
+
+	union acpi_object		arg0 = {ACPI_TYPE_BUFFER};
+	u32				arg0_buf[3];
+	struct acpi_object_list 	arg_list = {1, &arg0};
+
+	dprintk("acpi_cpufreq_cpu_init\n");
+	/* setup arg_list for _PDC settings */
+        arg0.buffer.length = 12;
+        arg0.buffer.pointer = (u8 *) arg0_buf;
+
+	data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
+	if (!data)
+		return (-ENOMEM);
+	memset(data, 0, sizeof(struct cpufreq_acpi_io));
+
+	acpi_io_data[cpu] = data;
+
+	acpi_processor_cpu_init_pdc(&data->acpi_data, cpu, &arg_list);
+	result = acpi_processor_register_performance(&data->acpi_data, cpu);
+	data->acpi_data.pdc = NULL;
+
+	if (result)
+		goto err_free;
+
+	if (is_const_loops_cpu(cpu)) {
+		acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
+	}
+
+	/* capability check */
+	if (data->acpi_data.state_count <= 1) {
+		dprintk("No P-States\n");
+		result = -ENODEV;
+		goto err_unreg;
+	}
+	if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) ||
+	    (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
+		dprintk("Unsupported address space [%d, %d]\n",
+			(u32) (data->acpi_data.control_register.space_id),
+			(u32) (data->acpi_data.status_register.space_id));
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	/* alloc freq_table */
+	data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * (data->acpi_data.state_count + 1), GFP_KERNEL);
+	if (!data->freq_table) {
+		result = -ENOMEM;
+		goto err_unreg;
+	}
+
+	/* detect transition latency */
+	policy->cpuinfo.transition_latency = 0;
+	for (i=0; i<data->acpi_data.state_count; i++) {
+		if ((data->acpi_data.states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency)
+			policy->cpuinfo.transition_latency = data->acpi_data.states[i].transition_latency * 1000;
+	}
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/* The current speed is unknown and not detectable by ACPI...  */
+	policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
+
+	/* table init */
+	for (i=0; i<=data->acpi_data.state_count; i++)
+	{
+		data->freq_table[i].index = i;
+		if (i<data->acpi_data.state_count)
+			data->freq_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
+		else
+			data->freq_table[i].frequency = CPUFREQ_TABLE_END;
+	}
+
+	result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
+	if (result) {
+		goto err_freqfree;
+	}
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management activated.\n",
+	       cpu);
+	for (i = 0; i < data->acpi_data.state_count; i++)
+		dprintk("     %cP%d: %d MHz, %d mW, %d uS\n",
+			(i == data->acpi_data.state?'*':' '), i,
+			(u32) data->acpi_data.states[i].core_frequency,
+			(u32) data->acpi_data.states[i].power,
+			(u32) data->acpi_data.states[i].transition_latency);
+
+	cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
+	return (result);
+
+ err_freqfree:
+	kfree(data->freq_table);
+ err_unreg:
+	acpi_processor_unregister_performance(&data->acpi_data, cpu);
+ err_free:
+	kfree(data);
+	acpi_io_data[cpu] = NULL;
+
+	return (result);
+}
+
+
+static int
+acpi_cpufreq_cpu_exit (
+	struct cpufreq_policy   *policy)
+{
+	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+
+	dprintk("acpi_cpufreq_cpu_exit\n");
+
+	if (data) {
+		cpufreq_frequency_table_put_attr(policy->cpu);
+		acpi_io_data[policy->cpu] = NULL;
+		acpi_processor_unregister_performance(&data->acpi_data, policy->cpu);
+		kfree(data);
+	}
+
+	return (0);
+}
+
+static int
+acpi_cpufreq_resume (
+	struct cpufreq_policy   *policy)
+{
+	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+
+	dprintk("acpi_cpufreq_resume\n");
+
+	data->resume = 1;
+
+	return (0);
+}
+
+
+static struct freq_attr* acpi_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver acpi_cpufreq_driver = {
+	.verify 	= acpi_cpufreq_verify,
+	.target 	= acpi_cpufreq_target,
+	.init		= acpi_cpufreq_cpu_init,
+	.exit		= acpi_cpufreq_cpu_exit,
+	.resume		= acpi_cpufreq_resume,
+	.name		= "acpi-cpufreq",
+	.owner		= THIS_MODULE,
+	.attr           = acpi_cpufreq_attr,
+};
+
+
+static int __init
+acpi_cpufreq_init (void)
+{
+	int                     result = 0;
+
+	dprintk("acpi_cpufreq_init\n");
+
+ 	result = cpufreq_register_driver(&acpi_cpufreq_driver);
+	
+	return (result);
+}
+
+
+static void __exit
+acpi_cpufreq_exit (void)
+{
+	dprintk("acpi_cpufreq_exit\n");
+
+	cpufreq_unregister_driver(&acpi_cpufreq_driver);
+
+	return;
+}
+
+
+late_initcall(acpi_cpufreq_init);
+module_exit(acpi_cpufreq_exit);
+
+MODULE_ALIAS("acpi");
diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
new file mode 100644
index 000000000000..04a405345203
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -0,0 +1,457 @@
+/*
+ * (C) 2004  Sebastian Witt <se.witt@gmx.net>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon reverse engineered information
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#define NFORCE2_XTAL 25
+#define NFORCE2_BOOTFSB 0x48
+#define NFORCE2_PLLENABLE 0xa8
+#define NFORCE2_PLLREG 0xa4
+#define NFORCE2_PLLADR 0xa0
+#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div)
+
+#define NFORCE2_MIN_FSB 50
+#define NFORCE2_SAFE_DISTANCE 50
+
+/* Delay in ms between FSB changes */
+//#define NFORCE2_DELAY 10
+
+/* nforce2_chipset:
+ * FSB is changed using the chipset
+ */
+static struct pci_dev *nforce2_chipset_dev;
+
+/* fid:
+ * multiplier * 10
+ */
+static int fid = 0;
+
+/* min_fsb, max_fsb:
+ * minimum and maximum FSB (= FSB at boot time) 
+ */
+static int min_fsb = 0;
+static int max_fsb = 0;
+
+MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
+MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
+MODULE_LICENSE("GPL");
+
+module_param(fid, int, 0444);
+module_param(min_fsb, int, 0444);
+
+MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
+MODULE_PARM_DESC(min_fsb,
+                 "Minimum FSB to use, if not defined: current FSB - 50");
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
+
+/*
+ * nforce2_calc_fsb - calculate FSB
+ * @pll: PLL value
+ * 
+ *   Calculates FSB from PLL value
+ */
+static int nforce2_calc_fsb(int pll)
+{
+	unsigned char mul, div;
+
+	mul = (pll >> 8) & 0xff;
+	div = pll & 0xff;
+
+	if (div > 0)
+		return NFORCE2_XTAL * mul / div;
+
+	return 0;
+}
+
+/*
+ * nforce2_calc_pll - calculate PLL value
+ * @fsb: FSB
+ * 
+ *   Calculate PLL value for given FSB
+ */
+static int nforce2_calc_pll(unsigned int fsb)
+{
+	unsigned char xmul, xdiv;
+	unsigned char mul = 0, div = 0;
+	int tried = 0;
+
+	/* Try to calculate multiplier and divider up to 4 times */
+	while (((mul == 0) || (div == 0)) && (tried <= 3)) {
+		for (xdiv = 1; xdiv <= 0x80; xdiv++)
+			for (xmul = 1; xmul <= 0xfe; xmul++)
+				if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) ==
+				    fsb + tried) {
+					mul = xmul;
+					div = xdiv;
+				}
+		tried++;
+	}
+
+	if ((mul == 0) || (div == 0))
+		return -1;
+
+	return NFORCE2_PLL(mul, div);
+}
+
+/*
+ * nforce2_write_pll - write PLL value to chipset
+ * @pll: PLL value
+ * 
+ *   Writes new FSB PLL value to chipset
+ */
+static void nforce2_write_pll(int pll)
+{
+	int temp;
+
+	/* Set the pll addr. to 0x00 */
+	temp = 0x00;
+	pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp);
+
+	/* Now write the value in all 64 registers */
+	for (temp = 0; temp <= 0x3f; temp++) {
+		pci_write_config_dword(nforce2_chipset_dev, 
+                                       NFORCE2_PLLREG, pll);
+	}
+
+	return;
+}
+
+/*
+ * nforce2_fsb_read - Read FSB
+ *
+ *   Read FSB from chipset
+ *   If bootfsb != 0, return FSB at boot-time
+ */
+static unsigned int nforce2_fsb_read(int bootfsb)
+{
+	struct pci_dev *nforce2_sub5;
+	u32 fsb, temp = 0;
+
+	
+	/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
+	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+                                      0x01EF,
+                                      PCI_ANY_ID,
+                                      PCI_ANY_ID,
+                                      NULL);
+	
+	if (!nforce2_sub5)
+		return 0;
+
+	pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb);
+	fsb /= 1000000;
+	
+	/* Check if PLL register is already set */
+	pci_read_config_byte(nforce2_chipset_dev, 
+                             NFORCE2_PLLENABLE, (u8 *)&temp);
+	
+	if(bootfsb || !temp)
+		return fsb;
+		
+	/* Use PLL register FSB value */
+	pci_read_config_dword(nforce2_chipset_dev, 
+                              NFORCE2_PLLREG, &temp);
+	fsb = nforce2_calc_fsb(temp);
+
+	return fsb;
+}
+
+/*
+ * nforce2_set_fsb - set new FSB
+ * @fsb: New FSB
+ * 
+ *   Sets new FSB
+ */
+static int nforce2_set_fsb(unsigned int fsb)
+{
+	u32 pll, temp = 0;
+	unsigned int tfsb;
+	int diff;
+
+	if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
+		printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb);
+		return -EINVAL;
+	}
+	
+	tfsb = nforce2_fsb_read(0);
+	if (!tfsb) {
+		printk(KERN_ERR "cpufreq: Error while reading the FSB\n");
+		return -EINVAL;
+	}
+
+	/* First write? Then set actual value */
+	pci_read_config_byte(nforce2_chipset_dev, 
+                             NFORCE2_PLLENABLE, (u8 *)&temp);
+	if (!temp) {
+		pll = nforce2_calc_pll(tfsb);
+
+		if (pll < 0)
+			return -EINVAL;
+
+		nforce2_write_pll(pll);
+	}
+
+	/* Enable write access */
+	temp = 0x01;
+	pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp);
+
+	diff = tfsb - fsb;
+
+	if (!diff)
+		return 0;
+
+	while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) {
+		if (diff < 0)
+			tfsb++;
+		else
+			tfsb--;
+
+		/* Calculate the PLL reg. value */
+		if ((pll = nforce2_calc_pll(tfsb)) == -1)
+			return -EINVAL;
+		
+		nforce2_write_pll(pll);
+#ifdef NFORCE2_DELAY
+		mdelay(NFORCE2_DELAY);
+#endif
+	}
+
+	temp = 0x40;
+	pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp);
+
+	return 0;
+}
+
+/**
+ * nforce2_get - get the CPU frequency
+ * @cpu: CPU number
+ * 
+ * Returns the CPU frequency
+ */
+static unsigned int nforce2_get(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+	return nforce2_fsb_read(0) * fid * 100;
+}
+
+/**
+ * nforce2_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int nforce2_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq, unsigned int relation)
+{
+//        unsigned long         flags;
+	struct cpufreq_freqs freqs;
+	unsigned int target_fsb;
+
+	if ((target_freq > policy->max) || (target_freq < policy->min))
+		return -EINVAL;
+
+	target_fsb = target_freq / (fid * 100);
+
+	freqs.old = nforce2_get(policy->cpu);
+	freqs.new = target_fsb * fid * 100;
+	freqs.cpu = 0;		/* Only one CPU on nForce2 plattforms */
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	dprintk(KERN_INFO "cpufreq: Old CPU frequency %d kHz, new %d kHz\n",
+	       freqs.old, freqs.new);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Disable IRQs */
+	//local_irq_save(flags);
+
+	if (nforce2_set_fsb(target_fsb) < 0)
+		printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
+                       target_fsb);
+	else
+		dprintk(KERN_INFO "cpufreq: Changed FSB successfully to %d\n",
+                       target_fsb);
+
+	/* Enable IRQs */
+	//local_irq_restore(flags);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+/**
+ * nforce2_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ */
+static int nforce2_verify(struct cpufreq_policy *policy)
+{
+	unsigned int fsb_pol_max;
+
+	fsb_pol_max = policy->max / (fid * 100);
+
+	if (policy->min < (fsb_pol_max * fid * 100))
+		policy->max = (fsb_pol_max + 1) * fid * 100;
+
+	cpufreq_verify_within_limits(policy,
+                                     policy->cpuinfo.min_freq,
+                                     policy->cpuinfo.max_freq);
+	return 0;
+}
+
+static int nforce2_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int fsb;
+	unsigned int rfid;
+
+	/* capability check */
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* Get current FSB */
+	fsb = nforce2_fsb_read(0);
+
+	if (!fsb)
+		return -EIO;
+
+	/* FIX: Get FID from CPU */
+	if (!fid) {
+		if (!cpu_khz) {
+			printk(KERN_WARNING
+			       "cpufreq: cpu_khz not set, can't calculate multiplier!\n");
+			return -ENODEV;
+		}
+
+		fid = cpu_khz / (fsb * 100);
+		rfid = fid % 5;
+
+		if (rfid) {
+			if (rfid > 2)
+				fid += 5 - rfid;
+			else
+				fid -= rfid;
+		}
+	}
+
+	printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb,
+	       fid / 10, fid % 10);
+	
+	/* Set maximum FSB to FSB at boot time */
+	max_fsb = nforce2_fsb_read(1);
+	
+	if(!max_fsb)
+		return -EIO;
+
+	if (!min_fsb)
+		min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE;
+
+	if (min_fsb < NFORCE2_MIN_FSB)
+		min_fsb = NFORCE2_MIN_FSB;
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.min_freq = min_fsb * fid * 100;
+	policy->cpuinfo.max_freq = max_fsb * fid * 100;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = nforce2_get(policy->cpu);
+	policy->min = policy->cpuinfo.min_freq;
+	policy->max = policy->cpuinfo.max_freq;
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	return 0;
+}
+
+static int nforce2_cpu_exit(struct cpufreq_policy *policy)
+{
+	return 0;
+}
+
+static struct cpufreq_driver nforce2_driver = {
+	.name = "nforce2",
+	.verify = nforce2_verify,
+	.target = nforce2_target,
+	.get = nforce2_get,
+	.init = nforce2_cpu_init,
+	.exit = nforce2_cpu_exit,
+	.owner = THIS_MODULE,
+};
+
+/**
+ * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
+ *
+ * Detects nForce2 A2 and C1 stepping
+ * 
+ */
+static unsigned int nforce2_detect_chipset(void)
+{
+	u8 revision;
+
+	nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+                                             PCI_DEVICE_ID_NVIDIA_NFORCE2,
+                                             PCI_ANY_ID,
+                                             PCI_ANY_ID,
+                                             NULL);
+
+	if (nforce2_chipset_dev == NULL)
+		return -ENODEV;
+
+	pci_read_config_byte(nforce2_chipset_dev, PCI_REVISION_ID, &revision);
+
+	printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
+	       revision);
+	printk(KERN_INFO
+	       "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n");
+
+	return 0;
+}
+
+/**
+ * nforce2_init - initializes the nForce2 CPUFreq driver
+ *
+ * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init nforce2_init(void)
+{
+	/* TODO: do we need to detect the processor? */
+
+	/* detect chipset */
+	if (nforce2_detect_chipset()) {
+		printk(KERN_ERR "cpufreq: No nForce2 chipset.\n");
+		return -ENODEV;
+	}
+
+	return cpufreq_register_driver(&nforce2_driver);
+}
+
+/**
+ * nforce2_exit - unregisters cpufreq module
+ *
+ *   Unregisters nForce2 FSB change support.
+ */
+static void __exit nforce2_exit(void)
+{
+	cpufreq_unregister_driver(&nforce2_driver);
+}
+
+module_init(nforce2_init);
+module_exit(nforce2_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/elanfreq.c b/arch/i386/kernel/cpu/cpufreq/elanfreq.c
new file mode 100644
index 000000000000..3f7caa4ae6d6
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/elanfreq.c
@@ -0,0 +1,312 @@
+/*
+ * 	elanfreq: 	cpufreq driver for the AMD ELAN family
+ *
+ *	(c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ *	Parts of this code are (c) Sven Geggus <sven@geggus.net> 
+ *
+ *      All Rights Reserved. 
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version. 
+ *
+ *	2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define REG_CSCIR 0x22 		/* Chip Setup and Control Index Register    */
+#define REG_CSCDR 0x23		/* Chip Setup and Control Data  Register    */
+
+/* Module parameter */
+static int max_freq;
+
+struct s_elan_multiplier {
+	int clock;		/* frequency in kHz                         */
+	int val40h;		/* PMU Force Mode register                  */
+	int val80h;		/* CPU Clock Speed Register                 */
+};
+
+/*
+ * It is important that the frequencies 
+ * are listed in ascending order here!
+ */
+struct s_elan_multiplier elan_multiplier[] = {
+	{1000,	0x02,	0x18},
+	{2000,	0x02,	0x10},
+	{4000,	0x02,	0x08},
+	{8000,	0x00,	0x00},
+	{16000,	0x00,	0x02},
+	{33000,	0x00,	0x04},
+	{66000,	0x01,	0x04},
+	{99000,	0x01,	0x05}
+};
+
+static struct cpufreq_frequency_table elanfreq_table[] = {
+	{0,	1000},
+	{1,	2000},
+	{2,	4000},
+	{3,	8000},
+	{4,	16000},
+	{5,	33000},
+	{6,	66000},
+	{7,	99000},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+
+/**
+ *	elanfreq_get_cpu_frequency: determine current cpu speed
+ *
+ *	Finds out at which frequency the CPU of the Elan SOC runs
+ *	at the moment. Frequencies from 1 to 33 MHz are generated 
+ *	the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
+ *	and have the rest of the chip running with 33 MHz. 
+ */
+
+static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
+{
+        u8 clockspeed_reg;    /* Clock Speed Register */
+	
+	local_irq_disable();
+        outb_p(0x80,REG_CSCIR);
+        clockspeed_reg = inb_p(REG_CSCDR);
+	local_irq_enable();
+
+        if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; }
+
+        /* Are we in CPU clock multiplied mode (66/99 MHz)? */
+        if ((clockspeed_reg & 0xE0) == 0xC0) {
+                if ((clockspeed_reg & 0x01) == 0) {
+			return 66000;
+		} else {
+			return 99000;             
+		}
+        }
+
+	/* 33 MHz is not 32 MHz... */
+	if ((clockspeed_reg & 0xE0)==0xA0)
+		return 33000;
+
+        return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
+}
+
+
+/**
+ *      elanfreq_set_cpu_frequency: Change the CPU core frequency
+ * 	@cpu: cpu number
+ *	@freq: frequency in kHz
+ *
+ *      This function takes a frequency value and changes the CPU frequency 
+ *	according to this. Note that the frequency has to be checked by
+ *	elanfreq_validatespeed() for correctness!
+ *	
+ *	There is no return value. 
+ */
+
+static void elanfreq_set_cpu_state (unsigned int state) {
+
+	struct cpufreq_freqs    freqs;
+
+	freqs.old = elanfreq_get_cpu_frequency(0);
+	freqs.new = elan_multiplier[state].clock;
+	freqs.cpu = 0; /* elanfreq.c is UP only driver */
+	
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock);
+
+
+	/* 
+	 * Access to the Elan's internal registers is indexed via    
+	 * 0x22: Chip Setup & Control Register Index Register (CSCI) 
+	 * 0x23: Chip Setup & Control Register Data  Register (CSCD) 
+	 *
+	 */
+
+	/* 
+	 * 0x40 is the Power Management Unit's Force Mode Register. 
+	 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
+	 */
+
+	local_irq_disable();
+	outb_p(0x40,REG_CSCIR); 	/* Disable hyperspeed mode          */
+	outb_p(0x00,REG_CSCDR);
+	local_irq_enable();		/* wait till internal pipelines and */
+	udelay(1000);			/* buffers have cleaned up          */
+
+	local_irq_disable();
+
+	/* now, set the CPU clock speed register (0x80) */
+	outb_p(0x80,REG_CSCIR);
+	outb_p(elan_multiplier[state].val80h,REG_CSCDR);
+
+	/* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
+	outb_p(0x40,REG_CSCIR);
+	outb_p(elan_multiplier[state].val40h,REG_CSCDR);
+	udelay(10000);
+	local_irq_enable();
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+
+/**
+ *	elanfreq_validatespeed: test if frequency range is valid
+ *      @policy: the policy to validate
+ *
+ *	This function checks if a given frequency range in kHz is valid 
+ *      for the hardware supported by the driver. 
+ */
+
+static int elanfreq_verify (struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
+}
+
+static int elanfreq_target (struct cpufreq_policy *policy, 
+			    unsigned int target_freq, 
+			    unsigned int relation)
+{
+	unsigned int    newstate = 0;
+
+	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
+		return -EINVAL;
+
+	elanfreq_set_cpu_state(newstate);
+
+	return 0;
+}
+
+
+/*
+ *	Module init and exit code
+ */
+
+static int elanfreq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+	unsigned int i;
+	int result;
+
+	/* capability check */
+	if ((c->x86_vendor != X86_VENDOR_AMD) ||
+	    (c->x86 != 4) || (c->x86_model!=10))
+		return -ENODEV;
+
+	/* max freq */
+	if (!max_freq)
+		max_freq = elanfreq_get_cpu_frequency(0);
+
+	/* table init */
+ 	for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if (elanfreq_table[i].frequency > max_freq)
+			elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+	}
+
+	/* cpuinfo and default policy values */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = elanfreq_get_cpu_frequency(0);
+
+	result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
+	if (result)
+		return (result);
+
+        cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
+
+	return 0;
+}
+
+
+static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+
+#ifndef MODULE
+/**
+ * elanfreq_setup - elanfreq command line parameter parsing
+ *
+ * elanfreq command line parameter.  Use:
+ *  elanfreq=66000
+ * to set the maximum CPU frequency to 66 MHz. Note that in
+ * case you do not give this boot parameter, the maximum
+ * frequency will fall back to _current_ CPU frequency which
+ * might be lower. If you build this as a module, use the
+ * max_freq module parameter instead.
+ */
+static int __init elanfreq_setup(char *str)
+{
+	max_freq = simple_strtoul(str, &str, 0);
+	printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+	return 1;
+}
+__setup("elanfreq=", elanfreq_setup);
+#endif
+
+
+static struct freq_attr* elanfreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+
+static struct cpufreq_driver elanfreq_driver = {
+	.get	 	= elanfreq_get_cpu_frequency,
+	.verify 	= elanfreq_verify,
+	.target 	= elanfreq_target,
+	.init		= elanfreq_cpu_init,
+	.exit		= elanfreq_cpu_exit,
+	.name		= "elanfreq",
+	.owner		= THIS_MODULE,
+	.attr		= elanfreq_attr,
+};
+
+
+static int __init elanfreq_init(void) 
+{	
+	struct cpuinfo_x86 *c = cpu_data;
+
+	/* Test if we have the right hardware */
+	if ((c->x86_vendor != X86_VENDOR_AMD) ||
+		(c->x86 != 4) || (c->x86_model!=10))
+	{
+		printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
+                return -ENODEV;
+	}
+	
+	return cpufreq_register_driver(&elanfreq_driver);
+}
+
+
+static void __exit elanfreq_exit(void) 
+{
+	cpufreq_unregister_driver(&elanfreq_driver);
+}
+
+
+module_param (max_freq, int, 0444);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
+
+module_init(elanfreq_init);
+module_exit(elanfreq_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
new file mode 100644
index 000000000000..1a49adb1f4a6
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
@@ -0,0 +1,502 @@
+/*
+ *	Cyrix MediaGX and NatSemi Geode Suspend Modulation
+ *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ *	(C) 2002 Hiroshi Miura   <miura@da-cha.org>
+ *	All Rights Reserved
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      version 2 as published by the Free Software Foundation 
+ *
+ *      The author(s) of this software shall not be held liable for damages
+ *      of any nature resulting due to the use of this software. This
+ *      software is provided AS-IS with no warranties.
+ *	
+ * Theoritical note:
+ *
+ *	(see Geode(tm) CS5530 manual (rev.4.1) page.56)
+ *
+ *	CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0
+ *	are based on Suspend Moduration.
+ *
+ *	Suspend Modulation works by asserting and de-asserting the SUSP# pin
+ *	to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
+ *	the CPU enters an idle state. GX1 stops its core clock when SUSP# is 
+ *	asserted then power consumption is reduced.
+ *
+ *	Suspend Modulation's OFF/ON duration are configurable 
+ *	with 'Suspend Modulation OFF Count Register'
+ *	and 'Suspend Modulation ON Count Register'.
+ *	These registers are 8bit counters that represent the number of 
+ *	32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
+ *	to the processor.
+ *
+ *	These counters define a ratio which is the effective frequency 
+ * 	of operation of the system.
+ *
+ *			       OFF Count
+ *	F_eff = Fgx * ----------------------
+ *	                OFF Count + ON Count
+ *
+ *	0 <= On Count, Off Count <= 255
+ *
+ *	From these limits, we can get register values 
+ *
+ *	off_duration + on_duration <= MAX_DURATION
+ *	on_duration = off_duration * (stock_freq - freq) / freq
+ *
+ *      off_duration  =  (freq * DURATION) / stock_freq 
+ *      on_duration = DURATION - off_duration 
+ *
+ *
+ *---------------------------------------------------------------------------
+ *
+ * ChangeLog:
+ *  	Dec. 12, 2003	Hiroshi Miura <miura@da-cha.org>
+ *  		- fix on/off register mistake
+ *  		- fix cpu_khz calc when it stops cpu modulation.
+ *
+ *	Dec. 11, 2002 	Hiroshi Miura <miura@da-cha.org>
+ *		- rewrite for Cyrix MediaGX Cx5510/5520 and 
+ *		  NatSemi Geode Cs5530(A).
+ *
+ *	Jul. ??, 2002  Zwane Mwaikambo <zwane@commfireservices.com>
+ *		- cs5530_mod patch for 2.4.19-rc1.
+ *
+ *---------------------------------------------------------------------------
+ *
+ * Todo
+ *	Test on machines with 5510, 5530, 5530A
+ */
+
+/************************************************************************
+ *			Suspend Modulation - Definitions		*
+ ************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <asm/processor.h> 
+#include <asm/errno.h>
+
+/* PCI config registers, all at F0 */
+#define PCI_PMER1              0x80    /* power management enable register 1 */
+#define PCI_PMER2              0x81    /* power management enable register 2 */
+#define PCI_PMER3              0x82    /* power management enable register 3 */
+#define PCI_IRQTC              0x8c    /* irq speedup timer counter register:typical 2 to 4ms */
+#define PCI_VIDTC              0x8d    /* video speedup timer counter register: typical 50 to 100ms */
+#define PCI_MODOFF             0x94    /* suspend modulation OFF counter register, 1 = 32us */
+#define PCI_MODON              0x95    /* suspend modulation ON counter register */
+#define PCI_SUSCFG             0x96    /* suspend configuration register */
+
+/* PMER1 bits */
+#define GPM                    (1<<0)  /* global power management */
+#define GIT                    (1<<1)  /* globally enable PM device idle timers */
+#define GTR                    (1<<2)  /* globally enable IO traps */
+#define IRQ_SPDUP              (1<<3)  /* disable clock throttle during interrupt handling */
+#define VID_SPDUP              (1<<4)  /* disable clock throttle during vga video handling */
+
+/* SUSCFG bits */
+#define SUSMOD                 (1<<0)  /* enable/disable suspend modulation */
+/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ 
+#define SMISPDUP               (1<<1)  /* select how SMI re-enable suspend modulation: */
+                                       /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
+#define SUSCFG                 (1<<2)  /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
+/* the belows support only with cs5530A */ 
+#define PWRSVE_ISA             (1<<3)  /* stop ISA clock  */
+#define PWRSVE                 (1<<4)  /* active idle */
+
+struct gxfreq_params {
+	u8 on_duration;
+	u8 off_duration;
+	u8 pci_suscfg;
+	u8 pci_pmer1;
+	u8 pci_pmer2;
+	u8 pci_rev;
+	struct pci_dev *cs55x0;
+};
+
+static struct gxfreq_params *gx_params;
+static int stock_freq;
+
+/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
+static int pci_busclk = 0;
+module_param (pci_busclk, int, 0444);
+
+/* maximum duration for which the cpu may be suspended
+ * (32us * MAX_DURATION). If no parameter is given, this defaults
+ * to 255. 
+ * Note that this leads to a maximum of 8 ms(!) where the CPU clock
+ * is suspended -- processing power is just 0.39% of what it used to be,
+ * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
+static int max_duration = 255;
+module_param (max_duration, int, 0444);
+
+/* For the default policy, we want at least some processing power
+ * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
+ */
+#define POLICY_MIN_DIV 20
+
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
+
+/**
+ *      we can detect a core multipiler from dir0_lsb 
+ *      from GX1 datasheet p.56, 
+ *	   MULT[3:0]:
+ *	   0000 = SYSCLK multiplied by 4 (test only)
+ *	   0001 = SYSCLK multiplied by 10
+ *	   0010 = SYSCLK multiplied by 4
+ *	   0011 = SYSCLK multiplied by 6
+ *	   0100 = SYSCLK multiplied by 9
+ *	   0101 = SYSCLK multiplied by 5
+ *	   0110 = SYSCLK multiplied by 7
+ *	   0111 = SYSCLK multiplied by 8
+ *              of 33.3MHz
+ **/
+static int gx_freq_mult[16] = {
+		4, 10, 4, 6, 9, 5, 7, 8,
+		0, 0, 0, 0, 0, 0, 0, 0
+};
+
+
+/****************************************************************
+ * 	Low Level chipset interface				*
+ ****************************************************************/
+static struct pci_device_id gx_chipset_tbl[] __initdata = {
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
+        { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
+        { 0, },
+};
+
+/**
+ *     gx_detect_chipset:
+ *
+ **/
+static __init struct pci_dev *gx_detect_chipset(void)
+{
+	struct pci_dev *gx_pci = NULL;
+
+	/* check if CPU is a MediaGX or a Geode. */
+        if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && 
+	    (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
+		dprintk("error: no MediaGX/Geode processor found!\n");
+		return NULL;		
+	}
+
+	/* detect which companion chip is used */
+	while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) {
+		if ((pci_match_device (gx_chipset_tbl, gx_pci)) != NULL) {
+			return gx_pci;
+		}
+	}
+
+	dprintk("error: no supported chipset found!\n");
+	return NULL;
+}
+
+/**
+ *      gx_get_cpuspeed:
+ *
+ * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
+ */
+static unsigned int gx_get_cpuspeed(unsigned int cpu)
+{
+	if ((gx_params->pci_suscfg & SUSMOD) == 0) 
+		return stock_freq;
+
+	return (stock_freq * gx_params->off_duration) 
+		/ (gx_params->on_duration + gx_params->off_duration);
+}
+
+/**
+ *      gx_validate_speed:
+ *      determine current cpu speed
+ *       
+**/
+
+static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration)
+{
+	unsigned int i;
+	u8 tmp_on, tmp_off;
+	int old_tmp_freq = stock_freq;
+	int tmp_freq;
+
+	*off_duration=1;
+	*on_duration=0;
+
+	for (i=max_duration; i>0; i--) {
+		tmp_off = ((khz * i) / stock_freq) & 0xff; 
+		tmp_on = i - tmp_off;
+		tmp_freq = (stock_freq * tmp_off) / i;
+		/* if this relation is closer to khz, use this. If it's equal,
+		 * prefer it, too - lower latency */
+		if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) {
+			*on_duration = tmp_on;
+			*off_duration = tmp_off;
+			old_tmp_freq = tmp_freq;
+		}
+	}
+
+	return old_tmp_freq;
+}
+
+
+/**
+ * 	gx_set_cpuspeed:
+ *		set cpu speed in khz.
+ **/
+
+static void gx_set_cpuspeed(unsigned int khz)
+{
+        u8 suscfg, pmer1;
+	unsigned int new_khz;
+	unsigned long flags;
+	struct cpufreq_freqs freqs;
+
+
+	freqs.cpu = 0;
+	freqs.old = gx_get_cpuspeed(0);
+
+	new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration);
+
+	freqs.new = new_khz;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	local_irq_save(flags);
+
+	if (new_khz != stock_freq) {  /* if new khz == 100% of CPU speed, it is special case */
+		switch (gx_params->cs55x0->device) {
+		case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
+			pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
+			/* FIXME: need to test other values -- Zwane,Miura */
+			pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */
+			pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
+			pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
+
+			if (gx_params->pci_rev < 0x10) {   /* CS5530(rev 1.2, 1.3) */
+				suscfg = gx_params->pci_suscfg | SUSMOD;
+			} else {                           /* CS5530A,B.. */
+				suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
+			}
+			break;
+		case PCI_DEVICE_ID_CYRIX_5520:
+		case PCI_DEVICE_ID_CYRIX_5510:
+			suscfg = gx_params->pci_suscfg | SUSMOD;
+			break;
+		default:
+			local_irq_restore(flags);
+			dprintk("fatal: try to set unknown chipset.\n");
+			return;
+		}
+	} else {
+		suscfg = gx_params->pci_suscfg & ~(SUSMOD);
+		gx_params->off_duration = 0;
+		gx_params->on_duration = 0;
+		dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n");
+	}
+
+	pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
+	pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
+
+        pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
+        pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
+
+        local_irq_restore(flags);
+
+	gx_params->pci_suscfg = suscfg;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+        dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
+                gx_params->on_duration * 32, gx_params->off_duration * 32);
+	dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); 
+}
+
+/****************************************************************
+ *             High level functions                             *
+ ****************************************************************/
+
+/*
+ *	cpufreq_gx_verify: test if frequency range is valid 
+ *
+ *	This function checks if a given frequency range in kHz is valid 
+ *      for the hardware supported by the driver. 
+ */
+
+static int cpufreq_gx_verify(struct cpufreq_policy *policy)
+{
+	unsigned int tmp_freq = 0;
+	u8 tmp1, tmp2;
+
+        if (!stock_freq || !policy)
+                return -EINVAL;
+
+	policy->cpu = 0;
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+
+	/* it needs to be assured that at least one supported frequency is
+	 * within policy->min and policy->max. If it is not, policy->max
+	 * needs to be increased until one freuqency is supported.
+	 * policy->min may not be decreased, though. This way we guarantee a 
+	 * specific processing capacity.
+	 */
+	tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
+	if (tmp_freq < policy->min) 
+		tmp_freq += stock_freq / max_duration;
+	policy->min = tmp_freq;
+	if (policy->min > policy->max) 
+		policy->max = tmp_freq;
+	tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
+	if (tmp_freq > policy->max)
+		tmp_freq -= stock_freq / max_duration;
+	policy->max = tmp_freq;
+	if (policy->max < policy->min)
+		policy->max = policy->min;
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+	
+	return 0;
+}
+
+/*
+ *      cpufreq_gx_target:  
+ *
+ */
+static int cpufreq_gx_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	u8 tmp1, tmp2;
+	unsigned int tmp_freq;
+
+        if (!stock_freq || !policy)
+                return -EINVAL;
+
+	policy->cpu = 0;
+
+	tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2);
+	while (tmp_freq < policy->min) {
+		tmp_freq += stock_freq / max_duration;
+		tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+	}
+	while (tmp_freq > policy->max) {
+		tmp_freq -= stock_freq / max_duration;
+		tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
+	}
+
+	gx_set_cpuspeed(tmp_freq);
+
+	return 0;
+}
+
+static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int maxfreq, curfreq;
+
+	if (!policy || policy->cpu != 0)
+		return -ENODEV;
+
+	/* determine maximum frequency */
+	if (pci_busclk) {
+		maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+	} else if (cpu_khz) {
+		maxfreq = cpu_khz;
+	} else {
+		maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
+	}
+	stock_freq = maxfreq;
+	curfreq = gx_get_cpuspeed(0);
+
+	dprintk("cpu max frequency is %d.\n", maxfreq);
+	dprintk("cpu current frequency is %dkHz.\n",curfreq);
+
+	/* setup basic struct for cpufreq API */
+	policy->cpu = 0;
+
+	if (max_duration < POLICY_MIN_DIV)
+		policy->min = maxfreq / max_duration;
+	else
+		policy->min = maxfreq / POLICY_MIN_DIV;
+	policy->max = maxfreq;
+	policy->cur = curfreq;
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.min_freq = maxfreq / max_duration;
+	policy->cpuinfo.max_freq = maxfreq;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+
+	return 0;
+}
+
+/* 
+ * cpufreq_gx_init:
+ *   MediaGX/Geode GX initialize cpufreq driver
+ */
+static struct cpufreq_driver gx_suspmod_driver = {
+	.get		= gx_get_cpuspeed,
+	.verify		= cpufreq_gx_verify,
+	.target		= cpufreq_gx_target,
+	.init		= cpufreq_gx_cpu_init,
+	.name		= "gx-suspmod",
+	.owner		= THIS_MODULE,
+};
+
+static int __init cpufreq_gx_init(void)
+{
+	int ret;
+	struct gxfreq_params *params;
+	struct pci_dev *gx_pci;
+	u32 class_rev;
+
+	/* Test if we have the right hardware */
+	if ((gx_pci = gx_detect_chipset()) == NULL) 
+		return -ENODEV;
+
+	/* check whether module parameters are sane */
+	if (max_duration > 0xff)
+		max_duration = 0xff;
+
+	dprintk("geode suspend modulation available.\n");
+
+	params = kmalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
+	if (params == NULL)
+		return -ENOMEM;
+	memset(params, 0, sizeof(struct gxfreq_params));
+
+	params->cs55x0 = gx_pci;
+	gx_params = params;
+
+	/* keep cs55x0 configurations */
+	pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg));
+	pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
+	pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
+	pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
+	pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
+        pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
+	params->pci_rev = class_rev && 0xff;
+
+	if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { 
+		kfree(params);
+		return ret;                   /* register error! */
+	}
+
+	return 0;
+}
+
+static void __exit cpufreq_gx_exit(void)
+{
+	cpufreq_unregister_driver(&gx_suspmod_driver);
+	pci_dev_put(gx_params->cs55x0);
+	kfree(gx_params);
+}
+
+MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE ("GPL");
+
+module_init(cpufreq_gx_init);
+module_exit(cpufreq_gx_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
new file mode 100644
index 000000000000..ab0f9f5aac11
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -0,0 +1,658 @@
+/*
+ *  (C) 2001-2004  Dave Jones. <davej@codemonkey.org.uk>
+ *  (C) 2002  Padraig Brady. <padraig@antefacto.com>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by VIA.
+ *
+ *  VIA have currently 3 different versions of Longhaul.
+ *  Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
+ *   It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
+ *  Version 2 of longhaul is the same as v1, but adds voltage scaling.
+ *   Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C)
+ *   voltage scaling support has currently been disabled in this driver
+ *   until we have code that gets it right.
+ *  Version 3 of longhaul got renamed to Powersaver and redesigned
+ *   to use the POWERSAVER MSR at 0x110a.
+ *   It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
+ *   It's pretty much the same feature wise to longhaul v2, though
+ *   there is provision for scaling FSB too, but this doesn't work
+ *   too well in practice so we don't even try to use this.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#include "longhaul.h"
+
+#define PFX "longhaul: "
+
+#define TYPE_LONGHAUL_V1	1
+#define TYPE_LONGHAUL_V2	2
+#define TYPE_POWERSAVER		3
+
+#define	CPU_SAMUEL	1
+#define	CPU_SAMUEL2	2
+#define	CPU_EZRA	3
+#define	CPU_EZRA_T	4
+#define	CPU_NEHEMIAH	5
+
+static int cpu_model;
+static unsigned int numscales=16, numvscales;
+static unsigned int fsb;
+static int minvid, maxvid;
+static unsigned int minmult, maxmult;
+static int can_scale_voltage;
+static int vrmrev;
+
+/* Module parameters */
+static int dont_scale_voltage;
+
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
+
+
+#define __hlt()     __asm__ __volatile__("hlt": : :"memory")
+
+/* Clock ratios multiplied by 10 */
+static int clock_ratio[32];
+static int eblcr_table[32];
+static int voltage_table[32];
+static unsigned int highest_speed, lowest_speed; /* kHz */
+static int longhaul_version;
+static struct cpufreq_frequency_table *longhaul_table;
+
+#ifdef CONFIG_CPU_FREQ_DEBUG
+static char speedbuffer[8];
+
+static char *print_speed(int speed)
+{
+	if (speed > 1000) {
+		if (speed%1000 == 0)
+			sprintf (speedbuffer, "%dGHz", speed/1000);
+		else
+			sprintf (speedbuffer, "%d.%dGHz", speed/1000, (speed%1000)/100);
+	} else
+		sprintf (speedbuffer, "%dMHz", speed);
+
+	return speedbuffer;
+}
+#endif
+
+
+static unsigned int calc_speed(int mult)
+{
+	int khz;
+	khz = (mult/10)*fsb;
+	if (mult%10)
+		khz += fsb/2;
+	khz *= 1000;
+	return khz;
+}
+
+
+static int longhaul_get_cpu_mult(void)
+{
+	unsigned long invalue=0,lo, hi;
+
+	rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
+	invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22;
+	if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) {
+		if (lo & (1<<27))
+			invalue+=16;
+	}
+	return eblcr_table[invalue];
+}
+
+
+static void do_powersaver(union msr_longhaul *longhaul,
+			unsigned int clock_ratio_index)
+{
+	int version;
+
+	switch (cpu_model) {
+	case CPU_EZRA_T:
+		version = 3;
+		break;
+	case CPU_NEHEMIAH:
+		version = 0xf;
+		break;
+	default:
+		return;
+	}
+
+	rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+	longhaul->bits.SoftBusRatio = clock_ratio_index & 0xf;
+	longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
+	longhaul->bits.EnableSoftBusRatio = 1;
+	longhaul->bits.RevisionKey = 0;
+	local_irq_disable();
+	wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+	local_irq_enable();
+	__hlt();
+
+	rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+	longhaul->bits.EnableSoftBusRatio = 0;
+	longhaul->bits.RevisionKey = version;
+	local_irq_disable();
+	wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+	local_irq_enable();
+}
+
+/**
+ * longhaul_set_cpu_frequency()
+ * @clock_ratio_index : bitpattern of the new multiplier.
+ *
+ * Sets a new clock ratio.
+ */
+
+static void longhaul_setstate(unsigned int clock_ratio_index)
+{
+	int speed, mult;
+	struct cpufreq_freqs freqs;
+	union msr_longhaul longhaul;
+	union msr_bcr2 bcr2;
+	static unsigned int old_ratio=-1;
+
+	if (old_ratio == clock_ratio_index)
+		return;
+	old_ratio = clock_ratio_index;
+
+	mult = clock_ratio[clock_ratio_index];
+	if (mult == -1)
+		return;
+
+	speed = calc_speed(mult);
+	if ((speed > highest_speed) || (speed < lowest_speed))
+		return;
+
+	freqs.old = calc_speed(longhaul_get_cpu_mult());
+	freqs.new = speed;
+	freqs.cpu = 0; /* longhaul.c is UP only driver */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
+			fsb, mult/10, mult%10, print_speed(speed/1000));
+
+	switch (longhaul_version) {
+
+	/*
+	 * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
+	 * Software controlled multipliers only.
+	 *
+	 * *NB* Until we get voltage scaling working v1 & v2 are the same code.
+	 * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5b] and Ezra [C5C]
+	 */
+	case TYPE_LONGHAUL_V1:
+	case TYPE_LONGHAUL_V2:
+		rdmsrl (MSR_VIA_BCR2, bcr2.val);
+		/* Enable software clock multiplier */
+		bcr2.bits.ESOFTBF = 1;
+		bcr2.bits.CLOCKMUL = clock_ratio_index;
+		local_irq_disable();
+		wrmsrl (MSR_VIA_BCR2, bcr2.val);
+		local_irq_enable();
+
+		__hlt();
+
+		/* Disable software clock multiplier */
+		rdmsrl (MSR_VIA_BCR2, bcr2.val);
+		bcr2.bits.ESOFTBF = 0;
+		local_irq_disable();
+		wrmsrl (MSR_VIA_BCR2, bcr2.val);
+		local_irq_enable();
+		break;
+
+	/*
+	 * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
+	 * We can scale voltage with this too, but that's currently
+	 * disabled until we come up with a decent 'match freq to voltage'
+	 * algorithm.
+	 * When we add voltage scaling, we will also need to do the
+	 * voltage/freq setting in order depending on the direction
+	 * of scaling (like we do in powernow-k7.c)
+	 * Nehemiah can do FSB scaling too, but this has never been proven
+	 * to work in practice.
+	 */
+	case TYPE_POWERSAVER:
+		do_powersaver(&longhaul, clock_ratio_index);
+		break;
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+}
+
+/*
+ * Centaur decided to make life a little more tricky.
+ * Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
+ * Samuel2 and above have to try and guess what the FSB is.
+ * We do this by assuming we booted at maximum multiplier, and interpolate
+ * between that value multiplied by possible FSBs and cpu_mhz which
+ * was calculated at boot time. Really ugly, but no other way to do this.
+ */
+
+#define ROUNDING	0xf
+
+static int _guess(int guess)
+{
+	int target;
+
+	target = ((maxmult/10)*guess);
+	if (maxmult%10 != 0)
+		target += (guess/2);
+	target += ROUNDING/2;
+	target &= ~ROUNDING;
+	return target;
+}
+
+
+static int guess_fsb(void)
+{
+	int speed = (cpu_khz/1000);
+	int i;
+	int speeds[3] = { 66, 100, 133 };
+
+	speed += ROUNDING/2;
+	speed &= ~ROUNDING;
+
+	for (i=0; i<3; i++) {
+		if (_guess(speeds[i]) == speed)
+			return speeds[i];
+	}
+	return 0;
+}
+
+
+static int __init longhaul_get_ranges(void)
+{
+	unsigned long invalue;
+	unsigned int multipliers[32]= {
+		50,30,40,100,55,35,45,95,90,70,80,60,120,75,85,65,
+		-1,110,120,-1,135,115,125,105,130,150,160,140,-1,155,-1,145 };
+	unsigned int j, k = 0;
+	union msr_longhaul longhaul;
+	unsigned long lo, hi;
+	unsigned int eblcr_fsb_table_v1[] = { 66, 133, 100, -1 };
+	unsigned int eblcr_fsb_table_v2[] = { 133, 100, -1, 66 };
+
+	switch (longhaul_version) {
+	case TYPE_LONGHAUL_V1:
+	case TYPE_LONGHAUL_V2:
+		/* Ugh, Longhaul v1 didn't have the min/max MSRs.
+		   Assume min=3.0x & max = whatever we booted at. */
+		minmult = 30;
+		maxmult = longhaul_get_cpu_mult();
+		rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
+		invalue = (lo & (1<<18|1<<19)) >>18;
+		if (cpu_model==CPU_SAMUEL || cpu_model==CPU_SAMUEL2)
+			fsb = eblcr_fsb_table_v1[invalue];
+		else
+			fsb = guess_fsb();
+		break;
+
+	case TYPE_POWERSAVER:
+		/* Ezra-T */
+		if (cpu_model==CPU_EZRA_T) {
+			rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+			invalue = longhaul.bits.MaxMHzBR;
+			if (longhaul.bits.MaxMHzBR4)
+				invalue += 16;
+			maxmult=multipliers[invalue];
+
+			invalue = longhaul.bits.MinMHzBR;
+			if (longhaul.bits.MinMHzBR4 == 1)
+				minmult = 30;
+			else
+				minmult = multipliers[invalue];
+			fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
+			break;
+		}
+
+		/* Nehemiah */
+		if (cpu_model==CPU_NEHEMIAH) {
+			rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+
+			/*
+			 * TODO: This code works, but raises a lot of questions.
+			 * - Some Nehemiah's seem to have broken Min/MaxMHzBR's.
+			 *   We get around this by using a hardcoded multiplier of 4.0x
+			 *   for the minimimum speed, and the speed we booted up at for the max.
+			 *   This is done in longhaul_get_cpu_mult() by reading the EBLCR register.
+			 * - According to some VIA documentation EBLCR is only
+			 *   in pre-Nehemiah C3s. How this still works is a mystery.
+			 *   We're possibly using something undocumented and unsupported,
+			 *   But it works, so we don't grumble.
+			 */
+			minmult=40;
+			maxmult=longhaul_get_cpu_mult();
+
+			/* Starting with the 1.2GHz parts, theres a 200MHz bus. */
+			if ((cpu_khz/1000) > 1200)
+				fsb = 200;
+			else
+				fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
+			break;
+		}
+	}
+
+	dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
+		 minmult/10, minmult%10, maxmult/10, maxmult%10);
+
+	if (fsb == -1) {
+		printk (KERN_INFO PFX "Invalid (reserved) FSB!\n");
+		return -EINVAL;
+	}
+
+	highest_speed = calc_speed(maxmult);
+	lowest_speed = calc_speed(minmult);
+	dprintk ("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
+		 print_speed(lowest_speed/1000), 
+		 print_speed(highest_speed/1000));
+
+	if (lowest_speed == highest_speed) {
+		printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+		return -EINVAL;
+	}
+	if (lowest_speed > highest_speed) {
+		printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+			lowest_speed, highest_speed);
+		return -EINVAL;
+	}
+
+	longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL);
+	if(!longhaul_table)
+		return -ENOMEM;
+
+	for (j=0; j < numscales; j++) {
+		unsigned int ratio;
+		ratio = clock_ratio[j];
+		if (ratio == -1)
+			continue;
+		if (ratio > maxmult || ratio < minmult)
+			continue;
+		longhaul_table[k].frequency = calc_speed(ratio);
+		longhaul_table[k].index	= j;
+		k++;
+	}
+
+	longhaul_table[k].frequency = CPUFREQ_TABLE_END;
+	if (!k) {
+		kfree (longhaul_table);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+static void __init longhaul_setup_voltagescaling(void)
+{
+	union msr_longhaul longhaul;
+
+	rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+
+	if (!(longhaul.bits.RevisionID & 1))
+		return;
+
+	minvid = longhaul.bits.MinimumVID;
+	maxvid = longhaul.bits.MaximumVID;
+	vrmrev = longhaul.bits.VRMRev;
+
+	if (minvid == 0 || maxvid == 0) {
+		printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
+					"Voltage scaling disabled.\n",
+					minvid/1000, minvid%1000, maxvid/1000, maxvid%1000);
+		return;
+	}
+
+	if (minvid == maxvid) {
+		printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
+				"both %d.%03d. Voltage scaling disabled\n",
+				maxvid/1000, maxvid%1000);
+		return;
+	}
+
+	if (vrmrev==0) {
+		dprintk ("VRM 8.5 \n");
+		memcpy (voltage_table, vrm85scales, sizeof(voltage_table));
+		numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25;
+	} else {
+		dprintk ("Mobile VRM \n");
+		memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table));
+		numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5;
+	}
+
+	/* Current voltage isn't readable at first, so we need to
+	   set it to a known value. The spec says to use maxvid */
+	longhaul.bits.RevisionKey = longhaul.bits.RevisionID;	/* FIXME: This is bad. */
+	longhaul.bits.EnableSoftVID = 1;
+	longhaul.bits.SoftVID = maxvid;
+	wrmsrl (MSR_VIA_LONGHAUL, longhaul.val);
+
+	minvid = voltage_table[minvid];
+	maxvid = voltage_table[maxvid];
+
+	dprintk ("Min VID=%d.%03d Max VID=%d.%03d, %d possible voltage scales\n",
+		maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales);
+
+	can_scale_voltage = 1;
+}
+
+
+static int longhaul_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, longhaul_table);
+}
+
+
+static int longhaul_target(struct cpufreq_policy *policy,
+			    unsigned int target_freq, unsigned int relation)
+{
+	unsigned int table_index = 0;
+	unsigned int new_clock_ratio = 0;
+
+	if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
+		return -EINVAL;
+
+	new_clock_ratio = longhaul_table[table_index].index & 0xFF;
+
+	longhaul_setstate(new_clock_ratio);
+
+	return 0;
+}
+
+
+static unsigned int longhaul_get(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+	return calc_speed(longhaul_get_cpu_mult());
+}
+
+
+static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+	char *cpuname=NULL;
+	int ret;
+
+	switch (c->x86_model) {
+	case 6:
+		cpu_model = CPU_SAMUEL;
+		cpuname = "C3 'Samuel' [C5A]";
+		longhaul_version = TYPE_LONGHAUL_V1;
+		memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
+		memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr));
+		break;
+
+	case 7:
+		longhaul_version = TYPE_LONGHAUL_V1;
+		switch (c->x86_mask) {
+		case 0:
+			cpu_model = CPU_SAMUEL2;
+			cpuname = "C3 'Samuel 2' [C5B]";
+			/* Note, this is not a typo, early Samuel2's had Samuel1 ratios. */
+			memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
+			memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr));
+			break;
+		case 1 ... 15:
+			if (c->x86_mask < 8) {
+				cpu_model = CPU_SAMUEL2;
+				cpuname = "C3 'Samuel 2' [C5B]";
+			} else {
+				cpu_model = CPU_EZRA;
+				cpuname = "C3 'Ezra' [C5C]";
+			}
+			memcpy (clock_ratio, ezra_clock_ratio, sizeof(ezra_clock_ratio));
+			memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr));
+			break;
+		}
+		break;
+
+	case 8:
+		cpu_model = CPU_EZRA_T;
+		cpuname = "C3 'Ezra-T' [C5M]";
+		longhaul_version = TYPE_POWERSAVER;
+		numscales=32;
+		memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio));
+		memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr));
+		break;
+
+	case 9:
+		cpu_model = CPU_NEHEMIAH;
+		longhaul_version = TYPE_POWERSAVER;
+		numscales=32;
+		switch (c->x86_mask) {
+		case 0 ... 1:
+			cpuname = "C3 'Nehemiah A' [C5N]";
+			memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio));
+			memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr));
+			break;
+		case 2 ... 4:
+			cpuname = "C3 'Nehemiah B' [C5N]";
+			memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio));
+			memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr));
+			break;
+		case 5 ... 15:
+			cpuname = "C3 'Nehemiah C' [C5N]";
+			memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio));
+			memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr));
+			break;
+		}
+		break;
+
+	default:
+		cpuname = "Unknown";
+		break;
+	}
+
+	printk (KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
+	switch (longhaul_version) {
+	case TYPE_LONGHAUL_V1:
+	case TYPE_LONGHAUL_V2:
+		printk ("Longhaul v%d supported.\n", longhaul_version);
+		break;
+	case TYPE_POWERSAVER:
+		printk ("Powersaver supported.\n");
+		break;
+	};
+
+	ret = longhaul_get_ranges();
+	if (ret != 0)
+		return ret;
+
+	if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) &&
+		 (dont_scale_voltage==0))
+		longhaul_setup_voltagescaling();
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = calc_speed(longhaul_get_cpu_mult());
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
+	if (ret)
+		return ret;
+
+	cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
+
+	return 0;
+}
+
+static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr* longhaul_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver longhaul_driver = {
+	.verify	= longhaul_verify,
+	.target	= longhaul_target,
+	.get	= longhaul_get,
+	.init	= longhaul_cpu_init,
+	.exit	= __devexit_p(longhaul_cpu_exit),
+	.name	= "longhaul",
+	.owner	= THIS_MODULE,
+	.attr	= longhaul_attr,
+};
+
+
+static int __init longhaul_init(void)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+
+	if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
+		return -ENODEV;
+
+	switch (c->x86_model) {
+	case 6 ... 9:
+		return cpufreq_register_driver(&longhaul_driver);
+	default:
+		printk (KERN_INFO PFX "Unknown VIA CPU. Contact davej@codemonkey.org.uk\n");
+	}
+
+	return -ENODEV;
+}
+
+
+static void __exit longhaul_exit(void)
+{
+	int i=0;
+
+	for (i=0; i < numscales; i++) {
+		if (clock_ratio[i] == maxmult) {
+			longhaul_setstate(i);
+			break;
+		}
+	}
+
+	cpufreq_unregister_driver(&longhaul_driver);
+	kfree(longhaul_table);
+}
+
+module_param (dont_scale_voltage, int, 0644);
+MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor");
+
+MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(longhaul_init);
+module_exit(longhaul_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h
new file mode 100644
index 000000000000..2a495c162ec7
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h
@@ -0,0 +1,466 @@
+/*
+ *  longhaul.h
+ *  (C) 2003 Dave Jones.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  VIA-specific information
+ */
+
+union msr_bcr2 {
+	struct {
+		unsigned Reseved:19,	// 18:0
+		ESOFTBF:1,		// 19
+		Reserved2:3,		// 22:20
+		CLOCKMUL:4,		// 26:23
+		Reserved3:5;		// 31:27
+	} bits;
+	unsigned long val;
+};
+
+union msr_longhaul {
+	struct {
+		unsigned RevisionID:4,	// 3:0
+		RevisionKey:4,		// 7:4
+		EnableSoftBusRatio:1,	// 8
+		EnableSoftVID:1,	// 9
+		EnableSoftBSEL:1,	// 10
+		Reserved:3,		// 11:13
+		SoftBusRatio4:1,	// 14
+		VRMRev:1,		// 15
+		SoftBusRatio:4,		// 19:16
+		SoftVID:5,		// 24:20
+		Reserved2:3,		// 27:25
+		SoftBSEL:2,		// 29:28
+		Reserved3:2,		// 31:30
+		MaxMHzBR:4,		// 35:32
+		MaximumVID:5,		// 40:36
+		MaxMHzFSB:2,		// 42:41
+		MaxMHzBR4:1,		// 43
+		Reserved4:4,		// 47:44
+		MinMHzBR:4,		// 51:48
+		MinimumVID:5,		// 56:52
+		MinMHzFSB:2,		// 58:57
+		MinMHzBR4:1,		// 59
+		Reserved5:4;		// 63:60
+	} bits;
+	unsigned long long val;
+};
+
+/*
+ * Clock ratio tables. Div/Mod by 10 to get ratio.
+ * The eblcr ones specify the ratio read from the CPU.
+ * The clock_ratio ones specify what to write to the CPU.
+ */
+
+/*
+ * VIA C3 Samuel 1  & Samuel 2 (stepping 0)
+ */
+static int __initdata samuel1_clock_ratio[16] = {
+	-1, /* 0000 -> RESERVED */
+	30, /* 0001 ->  3.0x */
+	40, /* 0010 ->  4.0x */
+	-1, /* 0011 -> RESERVED */
+	-1, /* 0100 -> RESERVED */
+	35, /* 0101 ->  3.5x */
+	45, /* 0110 ->  4.5x */
+	55, /* 0111 ->  5.5x */
+	60, /* 1000 ->  6.0x */
+	70, /* 1001 ->  7.0x */
+	80, /* 1010 ->  8.0x */
+	50, /* 1011 ->  5.0x */
+	65, /* 1100 ->  6.5x */
+	75, /* 1101 ->  7.5x */
+	-1, /* 1110 -> RESERVED */
+	-1, /* 1111 -> RESERVED */
+};
+
+static int __initdata samuel1_eblcr[16] = {
+	50, /* 0000 -> RESERVED */
+	30, /* 0001 ->  3.0x */
+	40, /* 0010 ->  4.0x */
+	-1, /* 0011 -> RESERVED */
+	55, /* 0100 ->  5.5x */
+	35, /* 0101 ->  3.5x */
+	45, /* 0110 ->  4.5x */
+	-1, /* 0111 -> RESERVED */
+	-1, /* 1000 -> RESERVED */
+	70, /* 1001 ->  7.0x */
+	80, /* 1010 ->  8.0x */
+	60, /* 1011 ->  6.0x */
+	-1, /* 1100 -> RESERVED */
+	75, /* 1101 ->  7.5x */
+	-1, /* 1110 -> RESERVED */
+	65, /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 Samuel2 Stepping 1->15
+ */
+static int __initdata samuel2_eblcr[16] = {
+	50,  /* 0000 ->  5.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	110, /* 0111 -> 11.0x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	130, /* 1110 -> 13.0x */
+	65,  /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 Ezra
+ */
+static int __initdata ezra_clock_ratio[16] = {
+	100, /* 0000 -> 10.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 -> 12.0x */
+};
+
+static int __initdata ezra_eblcr[16] = {
+	50,  /* 0000 ->  5.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+};
+
+/*
+ * VIA C3 (Ezra-T) [C5M].
+ */
+static int __initdata ezrat_clock_ratio[32] = {
+	100, /* 0000 -> 10.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 ->  12.0x */
+
+	-1,  /* 0000 -> RESERVED (10.0x) */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	-1,  /* 0011 -> RESERVED (9.0x)*/
+	105, /* 0100 -> 10.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	135, /* 0111 -> 13.5x */
+	140, /* 1000 -> 14.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	130, /* 1011 -> 13.0x */
+	145, /* 1100 -> 14.5x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	-1,  /* 1111 -> RESERVED (12.0x) */
+};
+
+static int __initdata ezrat_eblcr[32] = {
+	50,  /* 0000 ->  5.0x */
+	30,  /* 0001 ->  3.0x */
+	40,  /* 0010 ->  4.0x */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	35,  /* 0101 ->  3.5x */
+	45,  /* 0110 ->  4.5x */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+
+	-1,  /* 0000 -> RESERVED (9.0x) */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	-1,  /* 0011 -> RESERVED (10.0x)*/
+	135, /* 0100 -> 13.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	105, /* 0111 -> 10.5x */
+	130, /* 1000 -> 13.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	140, /* 1011 -> 14.0x */
+	-1,  /* 1100 -> RESERVED (12.0x) */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	145, /* 1111 -> 14.5x */
+};
+
+/*
+ * VIA C3 Nehemiah */
+ 
+static int __initdata nehemiah_a_clock_ratio[32] = {
+	100, /* 0000 -> 10.0x */
+	160, /* 0001 -> 16.0x */
+	-1,  /* 0010 ->  RESERVED */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	-1,  /* 0101 ->  RESERVED */
+	-1,  /* 0110 ->  RESERVED */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 -> 12.0x */
+	100, /* 0000 -> 10.0x */
+	-1,  /* 0001 -> RESERVED */
+	120, /* 0010 -> 12.0x */
+	90,  /* 0011 ->  9.0x */
+	105, /* 0100 -> 10.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	135, /* 0111 -> 13.5x */
+	140, /* 1000 -> 14.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	130, /* 1011 -> 13.0x */
+	145, /* 1100 -> 14.5x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	120, /* 1111 -> 12.0x */
+};
+
+static int __initdata  nehemiah_b_clock_ratio[32] = {
+	100, /* 0000 -> 10.0x */
+	160, /* 0001 -> 16.0x */
+	-1,  /* 0010 ->  RESERVED */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	-1,  /* 0101 ->  RESERVED */
+	-1,  /* 0110 ->  RESERVED */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 -> 12.0x */
+	100, /* 0000 -> 10.0x */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	90,  /* 0011 ->  9.0x */
+	105, /* 0100 -> 10.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	135, /* 0111 -> 13.5x */
+	140, /* 1000 -> 14.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	130, /* 1011 -> 13.0x */
+	145, /* 1100 -> 14.5x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	120, /* 1111 -> 12.0x */
+};
+
+static int __initdata  nehemiah_c_clock_ratio[32] = {
+	100, /* 0000 -> 10.0x */
+	160, /* 0001 -> 16.0x */
+	40,  /* 0010 ->  RESERVED */
+	90,  /* 0011 ->  9.0x */
+	95,  /* 0100 ->  9.5x */
+	-1,  /* 0101 ->  RESERVED */
+	45,  /* 0110 ->  RESERVED */
+	55,  /* 0111 ->  5.5x */
+	60,  /* 1000 ->  6.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	50,  /* 1011 ->  5.0x */
+	65,  /* 1100 ->  6.5x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	120, /* 1111 -> 12.0x */
+	100, /* 0000 -> 10.0x */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	90,  /* 0011 ->  9.0x */
+	105, /* 0100 -> 10.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	135, /* 0111 -> 13.5x */
+	140, /* 1000 -> 14.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	130, /* 1011 -> 13.0x */
+	145, /* 1100 -> 14.5x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	120, /* 1111 -> 12.0x */
+};
+
+static int __initdata nehemiah_a_eblcr[32] = {
+	50,  /* 0000 ->  5.0x */
+	160, /* 0001 -> 16.0x */
+	-1,  /* 0010 ->  RESERVED */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	-1,  /* 0101 ->  RESERVED */
+	-1,  /* 0110 ->  RESERVED */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+	90,  /* 0000 ->  9.0x */
+	-1,  /* 0001 -> RESERVED */
+	120, /* 0010 -> 12.0x */
+	100, /* 0011 -> 10.0x */
+	135, /* 0100 -> 13.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	105, /* 0111 -> 10.5x */
+	130, /* 1000 -> 13.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	140, /* 1011 -> 14.0x */
+	120, /* 1100 -> 12.0x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	145 /* 1111 -> 14.5x */
+   /* end of table  */
+};
+static int __initdata nehemiah_b_eblcr[32] = {
+	50,  /* 0000 ->  5.0x */
+	160, /* 0001 -> 16.0x */
+	-1,  /* 0010 ->  RESERVED */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	-1,  /* 0101 ->  RESERVED */
+	-1,  /* 0110 ->  RESERVED */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+	90,  /* 0000 ->  9.0x */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	100, /* 0011 -> 10.0x */
+	135, /* 0100 -> 13.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	105, /* 0111 -> 10.5x */
+	130, /* 1000 -> 13.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	140, /* 1011 -> 14.0x */
+	120, /* 1100 -> 12.0x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	145 /* 1111 -> 14.5x */
+	   /* end of table  */
+};
+static int __initdata nehemiah_c_eblcr[32] = {
+	50,  /* 0000 ->  5.0x */
+	160, /* 0001 -> 16.0x */
+	40,  /* 0010 ->  RESERVED */
+	100, /* 0011 -> 10.0x */
+	55,  /* 0100 ->  5.5x */
+	-1,  /* 0101 ->  RESERVED */
+	45,  /* 0110 ->  RESERVED */
+	95,  /* 0111 ->  9.5x */
+	90,  /* 1000 ->  9.0x */
+	70,  /* 1001 ->  7.0x */
+	80,  /* 1010 ->  8.0x */
+	60,  /* 1011 ->  6.0x */
+	120, /* 1100 -> 12.0x */
+	75,  /* 1101 ->  7.5x */
+	85,  /* 1110 ->  8.5x */
+	65,  /* 1111 ->  6.5x */
+	90,  /* 0000 ->  9.0x */
+	110, /* 0001 -> 11.0x */
+	120, /* 0010 -> 12.0x */
+	100, /* 0011 -> 10.0x */
+	135, /* 0100 -> 13.5x */
+	115, /* 0101 -> 11.5x */
+	125, /* 0110 -> 12.5x */
+	105, /* 0111 -> 10.5x */
+	130, /* 1000 -> 13.0x */
+	150, /* 1001 -> 15.0x */
+	160, /* 1010 -> 16.0x */
+	140, /* 1011 -> 14.0x */
+	120, /* 1100 -> 12.0x */
+	155, /* 1101 -> 15.5x */
+	-1,  /* 1110 -> RESERVED (13.0x) */
+	145 /* 1111 -> 14.5x */
+	  /* end of table  */
+};
+
+/* 
+ * Voltage scales. Div/Mod by 1000 to get actual voltage.
+ * Which scale to use depends on the VRM type in use.
+ */
+static int __initdata vrm85scales[32] = {
+	1250, 1200, 1150, 1100, 1050, 1800, 1750, 1700,
+	1650, 1600, 1550, 1500, 1450, 1400, 1350, 1300,
+	1275, 1225, 1175, 1125, 1075, 1825, 1775, 1725,
+	1675, 1625, 1575, 1525, 1475, 1425, 1375, 1325,
+};
+
+static int __initdata mobilevrmscales[32] = {
+	2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+	1600, 1550, 1500, 1450, 1500, 1350, 1300, -1,
+	1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+	1075, 1050, 1025, 1000, 975, 950, 925, -1,
+};
+
diff --git a/arch/i386/kernel/cpu/cpufreq/longrun.c b/arch/i386/kernel/cpu/cpufreq/longrun.c
new file mode 100644
index 000000000000..e3868de4dc2e
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/longrun.c
@@ -0,0 +1,326 @@
+/*
+ * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/timex.h>
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg)
+
+static struct cpufreq_driver	longrun_driver;
+
+/**
+ * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz
+ * values into per cent values. In TMTA microcode, the following is valid:
+ * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+ */
+static unsigned int longrun_low_freq, longrun_high_freq;
+
+
+/**
+ * longrun_get_policy - get the current LongRun policy
+ * @policy: struct cpufreq_policy where current policy is written into
+ *
+ * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS
+ * and MSR_TMTA_LONGRUN_CTRL
+ */
+static void __init longrun_get_policy(struct cpufreq_policy *policy)
+{
+	u32 msr_lo, msr_hi;
+
+	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+	dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi);
+	if (msr_lo & 0x01)
+		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+	else
+		policy->policy = CPUFREQ_POLICY_POWERSAVE;
+
+	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+	dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi);
+	msr_lo &= 0x0000007F;
+	msr_hi &= 0x0000007F;
+
+	if ( longrun_high_freq <= longrun_low_freq ) {
+		/* Assume degenerate Longrun table */
+		policy->min = policy->max = longrun_high_freq;
+	} else {
+		policy->min = longrun_low_freq + msr_lo *
+			((longrun_high_freq - longrun_low_freq) / 100);
+		policy->max = longrun_low_freq + msr_hi *
+			((longrun_high_freq - longrun_low_freq) / 100);
+	}
+	policy->cpu = 0;
+}
+
+
+/**
+ * longrun_set_policy - sets a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Sets a new CPUFreq policy on LongRun-capable processors. This function
+ * has to be called with cpufreq_driver locked.
+ */
+static int longrun_set_policy(struct cpufreq_policy *policy)
+{
+	u32 msr_lo, msr_hi;
+	u32 pctg_lo, pctg_hi;
+
+	if (!policy)
+		return -EINVAL;
+
+	if ( longrun_high_freq <= longrun_low_freq ) {
+		/* Assume degenerate Longrun table */
+		pctg_lo = pctg_hi = 100;
+	} else {
+		pctg_lo = (policy->min - longrun_low_freq) /
+			((longrun_high_freq - longrun_low_freq) / 100);
+		pctg_hi = (policy->max - longrun_low_freq) /
+			((longrun_high_freq - longrun_low_freq) / 100);
+	}
+
+	if (pctg_hi > 100)
+		pctg_hi = 100;
+	if (pctg_lo > pctg_hi)
+		pctg_lo = pctg_hi;
+
+	/* performance or economy mode */
+	rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+	msr_lo &= 0xFFFFFFFE;
+	switch (policy->policy) {
+	case CPUFREQ_POLICY_PERFORMANCE:
+		msr_lo |= 0x00000001;
+		break;
+	case CPUFREQ_POLICY_POWERSAVE:
+		break;
+	}
+	wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi);
+
+	/* lower and upper boundary */
+	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+	msr_lo &= 0xFFFFFF80;
+	msr_hi &= 0xFFFFFF80;
+	msr_lo |= pctg_lo;
+	msr_hi |= pctg_hi;
+	wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+	return 0;
+}
+
+
+/**
+ * longrun_verify_poliy - verifies a new CPUFreq policy
+ * @policy: the policy to verify
+ *
+ * Validates a new CPUFreq policy. This function has to be called with
+ * cpufreq_driver locked.
+ */
+static int longrun_verify_policy(struct cpufreq_policy *policy)
+{
+	if (!policy)
+		return -EINVAL;
+
+	policy->cpu = 0;
+	cpufreq_verify_within_limits(policy,
+		policy->cpuinfo.min_freq,
+		policy->cpuinfo.max_freq);
+
+	if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) &&
+	    (policy->policy != CPUFREQ_POLICY_PERFORMANCE))
+		return -EINVAL;
+
+	return 0;
+}
+
+static unsigned int longrun_get(unsigned int cpu)
+{
+	u32 eax, ebx, ecx, edx;
+
+	if (cpu)
+		return 0;
+
+	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+	dprintk("cpuid eax is %u\n", eax);
+
+	return (eax * 1000);
+}
+
+/**
+ * longrun_determine_freqs - determines the lowest and highest possible core frequency
+ * @low_freq: an int to put the lowest frequency into
+ * @high_freq: an int to put the highest frequency into
+ *
+ * Determines the lowest and highest possible core frequencies on this CPU.
+ * This is necessary to calculate the performance percentage according to
+ * TMTA rules:
+ * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq)
+ */
+static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
+						   unsigned int *high_freq)
+{
+	u32 msr_lo, msr_hi;
+	u32 save_lo, save_hi;
+	u32 eax, ebx, ecx, edx;
+	u32 try_hi;
+	struct cpuinfo_x86 *c = cpu_data;
+
+	if (!low_freq || !high_freq)
+		return -EINVAL;
+
+	if (cpu_has(c, X86_FEATURE_LRTI)) {
+		/* if the LongRun Table Interface is present, the
+		 * detection is a bit easier:
+		 * For minimum frequency, read out the maximum
+		 * level (msr_hi), write that into "currently
+		 * selected level", and read out the frequency.
+		 * For maximum frequency, read out level zero.
+		 */
+		/* minimum */
+		rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi);
+		wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi);
+		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+		*low_freq = msr_lo * 1000; /* to kHz */
+
+		/* maximum */
+		wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi);
+		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
+		*high_freq = msr_lo * 1000; /* to kHz */
+
+		dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq);
+
+		if (*low_freq > *high_freq)
+			*low_freq = *high_freq;
+		return 0;
+	}
+
+	/* set the upper border to the value determined during TSC init */
+	*high_freq = (cpu_khz / 1000);
+	*high_freq = *high_freq * 1000;
+	dprintk("high frequency is %u kHz\n", *high_freq);
+
+	/* get current borders */
+	rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+	save_lo = msr_lo & 0x0000007F;
+	save_hi = msr_hi & 0x0000007F;
+
+	/* if current perf_pctg is larger than 90%, we need to decrease the
+	 * upper limit to make the calculation more accurate.
+	 */
+	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+	/* try decreasing in 10% steps, some processors react only
+	 * on some barrier values */
+	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) {
+		/* set to 0 to try_hi perf_pctg */
+		msr_lo &= 0xFFFFFF80;
+		msr_hi &= 0xFFFFFF80;
+		msr_lo |= 0;
+		msr_hi |= try_hi;
+		wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi);
+
+		/* read out current core MHz and current perf_pctg */
+		cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
+
+		/* restore values */
+		wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi);
+	}
+	dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax);
+
+	/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
+	 * eqals
+	 * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
+	 *
+	 * high_freq * perf_pctg is stored tempoarily into "ebx".
+	 */
+	ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */
+
+	if ((ecx > 95) || (ecx == 0) || (eax < ebx))
+		return -EIO;
+
+	edx = (eax - ebx) / (100 - ecx);
+	*low_freq = edx * 1000; /* back to kHz */
+
+	dprintk("low frequency is %u kHz\n", *low_freq);
+
+	if (*low_freq > *high_freq)
+		*low_freq = *high_freq;
+
+	return 0;
+}
+
+
+static int __init longrun_cpu_init(struct cpufreq_policy *policy)
+{
+	int result = 0;
+
+	/* capability check */
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* detect low and high frequency */
+	result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq);
+	if (result)
+		return result;
+
+	/* cpuinfo and default policy values */
+	policy->cpuinfo.min_freq = longrun_low_freq;
+	policy->cpuinfo.max_freq = longrun_high_freq;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	longrun_get_policy(policy);
+
+	return 0;
+}
+
+
+static struct cpufreq_driver longrun_driver = {
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.verify		= longrun_verify_policy,
+	.setpolicy	= longrun_set_policy,
+	.get		= longrun_get,
+	.init		= longrun_cpu_init,
+	.name		= "longrun",
+	.owner		= THIS_MODULE,
+};
+
+
+/**
+ * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
+ *
+ * Initializes the LongRun support.
+ */
+static int __init longrun_init(void)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+
+	if (c->x86_vendor != X86_VENDOR_TRANSMETA ||
+	    !cpu_has(c, X86_FEATURE_LONGRUN))
+		return -ENODEV;
+
+	return cpufreq_register_driver(&longrun_driver);
+}
+
+
+/**
+ * longrun_exit - unregisters LongRun support
+ */
+static void __exit longrun_exit(void)
+{
+	cpufreq_unregister_driver(&longrun_driver);
+}
+
+
+MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(longrun_init);
+module_exit(longrun_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
new file mode 100644
index 000000000000..aa622d52c6e5
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -0,0 +1,337 @@
+/*
+ *	Pentium 4/Xeon CPU on demand clock modulation/speed scaling
+ *	(C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *	(C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ *	(C) 2002 Arjan van de Ven <arjanv@redhat.com>
+ *	(C) 2002 Tora T. Engstad
+ *	All Rights Reserved
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      The author(s) of this software shall not be held liable for damages
+ *      of any nature resulting due to the use of this software. This
+ *      software is provided AS-IS with no warranties.
+ *	
+ *	Date		Errata			Description
+ *	20020525	N44, O17	12.5% or 25% DC causes lockup
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/cpumask.h>
+
+#include <asm/processor.h> 
+#include <asm/msr.h>
+#include <asm/timex.h>
+
+#include "speedstep-lib.h"
+
+#define PFX	"p4-clockmod: "
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
+
+/*
+ * Duty Cycle (3bits), note DC_DISABLE is not specified in
+ * intel docs i just use it to mean disable
+ */
+enum {
+	DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
+	DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
+};
+
+#define DC_ENTRIES	8
+
+
+static int has_N44_O17_errata[NR_CPUS];
+static unsigned int stock_freq;
+static struct cpufreq_driver p4clockmod_driver;
+static unsigned int cpufreq_p4_get(unsigned int cpu);
+
+static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
+{
+	u32 l, h;
+
+	if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
+		return -EINVAL;
+
+	rdmsr(MSR_IA32_THERM_STATUS, l, h);
+
+	if (l & 0x01)
+		dprintk("CPU#%d currently thermal throttled\n", cpu);
+
+	if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
+		newstate = DC_38PT;
+
+	rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+	if (newstate == DC_DISABLE) {
+		dprintk("CPU#%d disabling modulation\n", cpu);
+		wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
+	} else {
+		dprintk("CPU#%d setting duty cycle to %d%%\n",
+			cpu, ((125 * newstate) / 10));
+		/* bits 63 - 5	: reserved 
+		 * bit  4	: enable/disable
+		 * bits 3-1	: duty cycle
+		 * bit  0	: reserved
+		 */
+		l = (l & ~14);
+		l = l | (1<<4) | ((newstate & 0x7)<<1);
+		wrmsr(MSR_IA32_THERM_CONTROL, l, h);
+	}
+
+	return 0;
+}
+
+
+static struct cpufreq_frequency_table p4clockmod_table[] = {
+	{DC_RESV, CPUFREQ_ENTRY_INVALID},
+	{DC_DFLT, 0},
+	{DC_25PT, 0},
+	{DC_38PT, 0},
+	{DC_50PT, 0},
+	{DC_64PT, 0},
+	{DC_75PT, 0},
+	{DC_88PT, 0},
+	{DC_DISABLE, 0},
+	{DC_RESV, CPUFREQ_TABLE_END},
+};
+
+
+static int cpufreq_p4_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	unsigned int    newstate = DC_RESV;
+	struct cpufreq_freqs freqs;
+	cpumask_t cpus_allowed;
+	int i;
+
+	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
+		return -EINVAL;
+
+	freqs.old = cpufreq_p4_get(policy->cpu);
+	freqs.new = stock_freq * p4clockmod_table[newstate].index / 8;
+
+	if (freqs.new == freqs.old)
+		return 0;
+
+	/* notifiers */
+	for_each_cpu_mask(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
+
+	/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
+	 * Developer's Manual, Volume 3 
+	 */
+	cpus_allowed = current->cpus_allowed;
+
+	for_each_cpu_mask(i, policy->cpus) {
+		cpumask_t this_cpu = cpumask_of_cpu(i);
+
+		set_cpus_allowed(current, this_cpu);
+		BUG_ON(smp_processor_id() != i);
+
+		cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
+	}
+	set_cpus_allowed(current, cpus_allowed);
+
+	/* notifiers */
+	for_each_cpu_mask(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
+
+	return 0;
+}
+
+
+static int cpufreq_p4_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]);
+}
+
+
+static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
+{
+	if ((c->x86 == 0x06) && (c->x86_model == 0x09)) {
+		/* Pentium M (Banias) */
+		printk(KERN_WARNING PFX "Warning: Pentium M detected. "
+		       "The speedstep_centrino module offers voltage scaling"
+		       " in addition of frequency scaling. You should use "
+		       "that instead of p4-clockmod, if possible.\n");
+		return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+	}
+
+	if ((c->x86 == 0x06) && (c->x86_model == 0x0D)) {
+		/* Pentium M (Dothan) */
+		printk(KERN_WARNING PFX "Warning: Pentium M detected. "
+		       "The speedstep_centrino module offers voltage scaling"
+		       " in addition of frequency scaling. You should use "
+		       "that instead of p4-clockmod, if possible.\n");
+		/* on P-4s, the TSC runs with constant frequency independent whether
+		 * throttling is active or not. */
+		p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+		return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+	}
+
+	if (c->x86 != 0xF) {
+		printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <linux@brodo.de>\n");
+		return 0;
+	}
+
+	/* on P-4s, the TSC runs with constant frequency independent whether
+	 * throttling is active or not. */
+	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+
+	if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) {
+		printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
+		       "The speedstep-ich or acpi cpufreq modules offer "
+		       "voltage scaling in addition of frequency scaling. "
+		       "You should use either one instead of p4-clockmod, "
+		       "if possible.\n");
+		return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M);
+	}
+
+	return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
+}
+
+ 
+
+static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = &cpu_data[policy->cpu];
+	int cpuid = 0;
+	unsigned int i;
+
+#ifdef CONFIG_SMP
+	policy->cpus = cpu_sibling_map[policy->cpu];
+#endif
+
+	/* Errata workaround */
+	cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
+	switch (cpuid) {
+	case 0x0f07:
+	case 0x0f0a:
+	case 0x0f11:
+	case 0x0f12:
+		has_N44_O17_errata[policy->cpu] = 1;
+		dprintk("has errata -- disabling low frequencies\n");
+	}
+	
+	/* get max frequency */
+	stock_freq = cpufreq_p4_get_frequency(c);
+	if (!stock_freq)
+		return -EINVAL;
+
+	/* table init */
+	for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if ((i<2) && (has_N44_O17_errata[policy->cpu]))
+			p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		else
+			p4clockmod_table[i].frequency = (stock_freq * i)/8;
+	}
+	cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
+	
+	/* cpuinfo and default policy values */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = 1000000; /* assumed */
+	policy->cur = stock_freq;
+
+	return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
+}
+
+
+static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);    
+	return 0;
+}
+
+static unsigned int cpufreq_p4_get(unsigned int cpu)
+{
+	cpumask_t cpus_allowed;
+	u32 l, h;
+
+	cpus_allowed = current->cpus_allowed;
+
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	BUG_ON(smp_processor_id() != cpu);
+
+	rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+
+	set_cpus_allowed(current, cpus_allowed);
+
+	if (l & 0x10) {
+		l = l >> 1;
+		l &= 0x7;
+	} else
+		l = DC_DISABLE;
+
+	if (l != DC_DISABLE)
+		return (stock_freq * l / 8);
+
+	return stock_freq;
+}
+
+static struct freq_attr* p4clockmod_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver p4clockmod_driver = {
+	.verify 	= cpufreq_p4_verify,
+	.target		= cpufreq_p4_target,
+	.init		= cpufreq_p4_cpu_init,
+	.exit		= cpufreq_p4_cpu_exit,
+	.get		= cpufreq_p4_get,
+	.name		= "p4-clockmod",
+	.owner		= THIS_MODULE,
+	.attr		= p4clockmod_attr,
+};
+
+
+static int __init cpufreq_p4_init(void)
+{	
+	struct cpuinfo_x86 *c = cpu_data;
+	int ret;
+
+	/*
+	 * THERM_CONTROL is architectural for IA32 now, so 
+	 * we can rely on the capability checks
+	 */
+	if (c->x86_vendor != X86_VENDOR_INTEL)
+		return -ENODEV;
+
+	if (!test_bit(X86_FEATURE_ACPI, c->x86_capability) ||
+		!test_bit(X86_FEATURE_ACC, c->x86_capability))
+		return -ENODEV;
+
+	ret = cpufreq_register_driver(&p4clockmod_driver);
+	if (!ret)
+		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
+
+	return (ret);
+}
+
+
+static void __exit cpufreq_p4_exit(void)
+{
+	cpufreq_unregister_driver(&p4clockmod_driver);
+}
+
+
+MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE ("GPL");
+
+late_initcall(cpufreq_p4_init);
+module_exit(cpufreq_p4_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
new file mode 100644
index 000000000000..222f8cfe3c57
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
@@ -0,0 +1,256 @@
+/*
+ *  This file was based upon code in Powertweak Linux (http://powertweak.sf.net)
+ *  (C) 2000-2003  Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+
+#define POWERNOW_IOPORT 0xfff0         /* it doesn't matter where, as long
+					  as it is unused */
+
+static unsigned int                     busfreq;   /* FSB, in 10 kHz */
+static unsigned int                     max_multiplier;
+
+
+/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
+static struct cpufreq_frequency_table clock_ratio[] = {
+	{45,  /* 000 -> 4.5x */ 0},
+	{50,  /* 001 -> 5.0x */ 0},
+	{40,  /* 010 -> 4.0x */ 0},
+	{55,  /* 011 -> 5.5x */ 0},
+	{20,  /* 100 -> 2.0x */ 0},
+	{30,  /* 101 -> 3.0x */ 0},
+	{60,  /* 110 -> 6.0x */ 0},
+	{35,  /* 111 -> 3.5x */ 0},
+	{0, CPUFREQ_TABLE_END}
+};
+
+
+/**
+ * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
+ *
+ *   Returns the current setting of the frequency multiplier. Core clock
+ * speed is frequency of the Front-Side Bus multiplied with this value.
+ */
+static int powernow_k6_get_cpu_multiplier(void)
+{
+	u64             invalue = 0;
+	u32             msrval;
+	
+	msrval = POWERNOW_IOPORT + 0x1;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+	invalue=inl(POWERNOW_IOPORT + 0x8);
+	msrval = POWERNOW_IOPORT + 0x0;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+	return clock_ratio[(invalue >> 5)&7].index;
+}
+
+
+/**
+ * powernow_k6_set_state - set the PowerNow! multiplier
+ * @best_i: clock_ratio[best_i] is the target multiplier
+ *
+ *   Tries to change the PowerNow! multiplier
+ */
+static void powernow_k6_set_state (unsigned int best_i)
+{
+	unsigned long           outvalue=0, invalue=0;
+	unsigned long           msrval;
+	struct cpufreq_freqs    freqs;
+
+	if (clock_ratio[best_i].index > max_multiplier) {
+		printk(KERN_ERR "cpufreq: invalid target frequency\n");
+		return;
+	}
+
+	freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
+	freqs.new = busfreq * clock_ratio[best_i].index;
+	freqs.cpu = 0; /* powernow-k6.c is UP only driver */
+	
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* we now need to transform best_i to the BVC format, see AMD#23446 */
+
+	outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+
+	msrval = POWERNOW_IOPORT + 0x1;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+	invalue=inl(POWERNOW_IOPORT + 0x8);
+	invalue = invalue & 0xf;
+	outvalue = outvalue | invalue;
+	outl(outvalue ,(POWERNOW_IOPORT + 0x8));
+	msrval = POWERNOW_IOPORT + 0x0;
+	wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return;
+}
+
+
+/**
+ * powernow_k6_verify - verifies a new CPUfreq policy
+ * @policy: new policy
+ *
+ * Policy must be within lowest and highest possible CPU Frequency,
+ * and at least one possible state must be within min and max.
+ */
+static int powernow_k6_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &clock_ratio[0]);
+}
+
+
+/**
+ * powernow_k6_setpolicy - sets a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * sets a new CPUFreq policy
+ */
+static int powernow_k6_target (struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int relation)
+{
+	unsigned int    newstate = 0;
+
+	if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate))
+		return -EINVAL;
+
+	powernow_k6_set_state(newstate);
+
+	return 0;
+}
+
+
+static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	int result;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	/* get frequencies */
+	max_multiplier = powernow_k6_get_cpu_multiplier();
+	busfreq = cpu_khz / max_multiplier;
+
+	/* table init */
+ 	for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if (clock_ratio[i].index > max_multiplier)
+			clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
+		else
+			clock_ratio[i].frequency = busfreq * clock_ratio[i].index;
+	}
+
+	/* cpuinfo and default policy values */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = busfreq * max_multiplier;
+
+	result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio);
+	if (result)
+		return (result);
+
+	cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu);
+
+	return 0;
+}
+
+
+static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int i;
+	for (i=0; i<8; i++) {
+		if (i==max_multiplier)
+			powernow_k6_set_state(i);
+	}
+	cpufreq_frequency_table_put_attr(policy->cpu);
+ 	return 0;
+}
+
+static unsigned int powernow_k6_get(unsigned int cpu)
+{
+	return busfreq * powernow_k6_get_cpu_multiplier();
+}
+
+static struct freq_attr* powernow_k6_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver powernow_k6_driver = {
+	.verify 	= powernow_k6_verify,
+	.target 	= powernow_k6_target,
+	.init		= powernow_k6_cpu_init,
+	.exit		= powernow_k6_cpu_exit,
+	.get		= powernow_k6_get,
+	.name		= "powernow-k6",
+	.owner		= THIS_MODULE,
+	.attr		= powernow_k6_attr,
+};
+
+
+/**
+ * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
+ *
+ *   Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported
+ * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero
+ * on success.
+ */
+static int __init powernow_k6_init(void)
+{	
+	struct cpuinfo_x86      *c = cpu_data;
+
+	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
+		((c->x86_model != 12) && (c->x86_model != 13)))
+		return -ENODEV;
+
+	if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
+		printk("cpufreq: PowerNow IOPORT region already used.\n");
+		return -EIO;
+	}
+
+	if (cpufreq_register_driver(&powernow_k6_driver)) {
+		release_region (POWERNOW_IOPORT, 16);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/**
+ * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support
+ *
+ *   Unregisters AMD K6-2+ / K6-3+ PowerNow! support.
+ */
+static void __exit powernow_k6_exit(void)
+{
+	cpufreq_unregister_driver(&powernow_k6_driver);
+	release_region (POWERNOW_IOPORT, 16);
+}
+
+
+MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
+MODULE_LICENSE ("GPL");
+
+module_init(powernow_k6_init);
+module_exit(powernow_k6_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
new file mode 100644
index 000000000000..913f652623d9
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -0,0 +1,690 @@
+/*
+ *  AMD K7 Powernow driver.
+ *  (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs.
+ *  (C) 2003-2004 Dave Jones <davej@redhat.com>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt.
+ * - We cli/sti on stepping A0 CPUs around the FID/VID transition.
+ * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect.
+ * - We disable half multipliers if ACPI is used on A0 stepping CPUs.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#include "powernow-k7.h"
+
+#define PFX "powernow: "
+
+
+struct psb_s {
+	u8 signature[10];
+	u8 tableversion;
+	u8 flags;
+	u16 settlingtime;
+	u8 reserved1;
+	u8 numpst;
+};
+
+struct pst_s {
+	u32 cpuid;
+	u8 fsbspeed;
+	u8 maxfid;
+	u8 startvid;
+	u8 numpstates;
+};
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+union powernow_acpi_control_t {
+	struct {
+		unsigned long fid:5,
+		vid:5,
+		sgtc:20,
+		res1:2;
+	} bits;
+	unsigned long val;
+};
+#endif
+
+#ifdef CONFIG_CPU_FREQ_DEBUG
+/* divide by 1000 to get VCore voltage in V. */
+static int mobile_vid_table[32] = {
+    2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+    1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
+    1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+    1075, 1050, 1025, 1000, 975, 950, 925, 0,
+};
+#endif
+
+/* divide by 10 to get FID. */
+static int fid_codes[32] = {
+    110, 115, 120, 125, 50, 55, 60, 65,
+    70, 75, 80, 85, 90, 95, 100, 105,
+    30, 190, 40, 200, 130, 135, 140, 210,
+    150, 225, 160, 165, 170, 180, -1, -1,
+};
+
+/* This parameter is used in order to force ACPI instead of legacy method for
+ * configuration purpose.
+ */
+
+static int acpi_force;
+
+static struct cpufreq_frequency_table *powernow_table;
+
+static unsigned int can_scale_bus;
+static unsigned int can_scale_vid;
+static unsigned int minimum_speed=-1;
+static unsigned int maximum_speed;
+static unsigned int number_scales;
+static unsigned int fsb;
+static unsigned int latency;
+static char have_a0;
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg)
+
+static int check_fsb(unsigned int fsbspeed)
+{
+	int delta;
+	unsigned int f = fsb / 1000;
+
+	delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
+	return (delta < 5);
+}
+
+static int check_powernow(void)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+	unsigned int maxei, eax, ebx, ecx, edx;
+
+	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) {
+#ifdef MODULE
+		printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n");
+#endif
+		return 0;
+	}
+
+	/* Get maximum capabilities */
+	maxei = cpuid_eax (0x80000000);
+	if (maxei < 0x80000007) {	/* Any powernow info ? */
+#ifdef MODULE
+		printk (KERN_INFO PFX "No powernow capabilities detected\n");
+#endif
+		return 0;
+	}
+
+	if ((c->x86_model == 6) && (c->x86_mask == 0)) {
+		printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n");
+		have_a0 = 1;
+	}
+
+	cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
+
+	/* Check we can actually do something before we say anything.*/
+	if (!(edx & (1 << 1 | 1 << 2)))
+		return 0;
+
+	printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
+
+	if (edx & 1 << 1) {
+		printk ("frequency");
+		can_scale_bus=1;
+	}
+
+	if ((edx & (1 << 1 | 1 << 2)) == 0x6)
+		printk (" and ");
+
+	if (edx & 1 << 2) {
+		printk ("voltage");
+		can_scale_vid=1;
+	}
+
+	printk (".\n");
+	return 1;
+}
+
+
+static int get_ranges (unsigned char *pst)
+{
+	unsigned int j;
+	unsigned int speed;
+	u8 fid, vid;
+
+	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL);
+	if (!powernow_table)
+		return -ENOMEM;
+	memset(powernow_table, 0, (sizeof(struct cpufreq_frequency_table) * (number_scales + 1)));
+
+	for (j=0 ; j < number_scales; j++) {
+		fid = *pst++;
+
+		powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
+		powernow_table[j].index = fid; /* lower 8 bits */
+
+		speed = powernow_table[j].frequency;
+
+		if ((fid_codes[fid] % 10)==5) {
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+			if (have_a0 == 1)
+				powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID;
+#endif
+		}
+
+		if (speed < minimum_speed)
+			minimum_speed = speed;
+		if (speed > maximum_speed)
+			maximum_speed = speed;
+
+		vid = *pst++;
+		powernow_table[j].index |= (vid << 8); /* upper 8 bits */
+
+		dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
+			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, 
+			 fid_codes[fid] % 10, speed/1000, vid,	
+			 mobile_vid_table[vid]/1000,
+			 mobile_vid_table[vid]%1000);
+	}
+	powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
+	powernow_table[number_scales].index = 0;
+
+	return 0;
+}
+
+
+static void change_FID(int fid)
+{
+	union msr_fidvidctl fidvidctl;
+
+	rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+	if (fidvidctl.bits.FID != fid) {
+		fidvidctl.bits.SGTC = latency;
+		fidvidctl.bits.FID = fid;
+		fidvidctl.bits.VIDC = 0;
+		fidvidctl.bits.FIDC = 1;
+		wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+	}
+}
+
+
+static void change_VID(int vid)
+{
+	union msr_fidvidctl fidvidctl;
+
+	rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+	if (fidvidctl.bits.VID != vid) {
+		fidvidctl.bits.SGTC = latency;
+		fidvidctl.bits.VID = vid;
+		fidvidctl.bits.FIDC = 0;
+		fidvidctl.bits.VIDC = 1;
+		wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+	}
+}
+
+
+static void change_speed (unsigned int index)
+{
+	u8 fid, vid;
+	struct cpufreq_freqs freqs;
+	union msr_fidvidstatus fidvidstatus;
+	int cfid;
+
+	/* fid are the lower 8 bits of the index we stored into
+	 * the cpufreq frequency table in powernow_decode_bios,
+	 * vid are the upper 8 bits.
+	 */
+
+	fid = powernow_table[index].index & 0xFF;
+	vid = (powernow_table[index].index & 0xFF00) >> 8;
+
+	freqs.cpu = 0;
+
+	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	cfid = fidvidstatus.bits.CFID;
+	freqs.old = fsb * fid_codes[cfid] / 10;
+
+	freqs.new = powernow_table[index].frequency;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* Now do the magic poking into the MSRs.  */
+
+	if (have_a0 == 1)	/* A0 errata 5 */
+		local_irq_disable();
+
+	if (freqs.old > freqs.new) {
+		/* Going down, so change FID first */
+		change_FID(fid);
+		change_VID(vid);
+	} else {
+		/* Going up, so change VID first */
+		change_VID(vid);
+		change_FID(fid);
+	}
+
+
+	if (have_a0 == 1)
+		local_irq_enable();
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+}
+
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+
+static struct acpi_processor_performance *acpi_processor_perf;
+
+static int powernow_acpi_init(void)
+{
+	int i;
+	int retval = 0;
+	union powernow_acpi_control_t pc;
+
+	if (acpi_processor_perf != NULL && powernow_table != NULL) {
+		retval = -EINVAL;
+		goto err0;
+	}
+
+	acpi_processor_perf = kmalloc(sizeof(struct acpi_processor_performance),
+				      GFP_KERNEL);
+
+	if (!acpi_processor_perf) {
+		retval = -ENOMEM;
+		goto err0;
+	}
+
+	memset(acpi_processor_perf, 0, sizeof(struct acpi_processor_performance));
+
+	if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
+		retval = -EIO;
+		goto err1;
+	}
+
+	if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	number_scales = acpi_processor_perf->state_count;
+
+	if (number_scales < 2) {
+		retval = -ENODEV;
+		goto err2;
+	}
+
+	powernow_table = kmalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL);
+	if (!powernow_table) {
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	memset(powernow_table, 0, ((number_scales + 1) * sizeof(struct cpufreq_frequency_table)));
+
+	pc.val = (unsigned long) acpi_processor_perf->states[0].control;
+	for (i = 0; i < number_scales; i++) {
+		u8 fid, vid;
+		unsigned int speed;
+
+		pc.val = (unsigned long) acpi_processor_perf->states[i].control;
+		dprintk ("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
+			 i,
+			 (u32) acpi_processor_perf->states[i].core_frequency,
+			 (u32) acpi_processor_perf->states[i].power,
+			 (u32) acpi_processor_perf->states[i].transition_latency,
+			 (u32) acpi_processor_perf->states[i].control,
+			 pc.bits.sgtc);
+
+		vid = pc.bits.vid;
+		fid = pc.bits.fid;
+
+		powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
+		powernow_table[i].index = fid; /* lower 8 bits */
+		powernow_table[i].index |= (vid << 8); /* upper 8 bits */
+
+		speed = powernow_table[i].frequency;
+
+		if ((fid_codes[fid] % 10)==5) {
+			if (have_a0 == 1)
+				powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		}
+
+		dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
+			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, 
+			 fid_codes[fid] % 10, speed/1000, vid,	
+			 mobile_vid_table[vid]/1000,
+			 mobile_vid_table[vid]%1000);
+
+		if (latency < pc.bits.sgtc)
+			latency = pc.bits.sgtc;
+
+		if (speed < minimum_speed)
+			minimum_speed = speed;
+		if (speed > maximum_speed)
+			maximum_speed = speed;
+	}
+
+	powernow_table[i].frequency = CPUFREQ_TABLE_END;
+	powernow_table[i].index = 0;
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	return 0;
+
+err2:
+	acpi_processor_unregister_performance(acpi_processor_perf, 0);
+err1:
+	kfree(acpi_processor_perf);
+err0:
+	printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n");
+	acpi_processor_perf = NULL;
+	return retval;
+}
+#else
+static int powernow_acpi_init(void)
+{
+	printk(KERN_INFO PFX "no support for ACPI processor found."
+	       "  Please recompile your kernel with ACPI processor\n");
+	return -EINVAL;
+}
+#endif
+
+static int powernow_decode_bios (int maxfid, int startvid)
+{
+	struct psb_s *psb;
+	struct pst_s *pst;
+	unsigned int i, j;
+	unsigned char *p;
+	unsigned int etuple;
+	unsigned int ret;
+
+	etuple = cpuid_eax(0x80000001);
+
+	for (i=0xC0000; i < 0xffff0 ; i+=16) {
+
+		p = phys_to_virt(i);
+
+		if (memcmp(p, "AMDK7PNOW!",  10) == 0){
+			dprintk ("Found PSB header at %p\n", p);
+			psb = (struct psb_s *) p;
+			dprintk ("Table version: 0x%x\n", psb->tableversion);
+			if (psb->tableversion != 0x12) {
+				printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n");
+				return -ENODEV;
+			}
+
+			dprintk ("Flags: 0x%x\n", psb->flags);
+			if ((psb->flags & 1)==0) {
+				dprintk ("Mobile voltage regulator\n");
+			} else {
+				dprintk ("Desktop voltage regulator\n");
+			}
+
+			latency = psb->settlingtime;
+			if (latency < 100) {
+				printk (KERN_INFO PFX "BIOS set settling time to %d microseconds."
+						"Should be at least 100. Correcting.\n", latency);
+				latency = 100;
+			}
+			dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime);
+			dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst);
+
+			p += sizeof (struct psb_s);
+
+			pst = (struct pst_s *) p;
+
+			for (i = 0 ; i <psb->numpst; i++) {
+				pst = (struct pst_s *) p;
+				number_scales = pst->numpstates;
+
+				if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) &&
+				    (maxfid==pst->maxfid) && (startvid==pst->startvid))
+				{
+					dprintk ("PST:%d (@%p)\n", i, pst);
+					dprintk (" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n", 
+						 pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
+
+					ret = get_ranges ((char *) pst + sizeof (struct pst_s));
+					return ret;
+
+				} else {
+					p = (char *) pst + sizeof (struct pst_s);
+					for (j=0 ; j < number_scales; j++)
+						p+=2;
+				}
+			}
+			printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple);
+			printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n");
+
+			return -EINVAL;
+		}
+		p++;
+	}
+
+	return -ENODEV;
+}
+
+
+static int powernow_target (struct cpufreq_policy *policy,
+			    unsigned int target_freq,
+			    unsigned int relation)
+{
+	unsigned int newstate;
+
+	if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate))
+		return -EINVAL;
+
+	change_speed(newstate);
+
+	return 0;
+}
+
+
+static int powernow_verify (struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, powernow_table);
+}
+
+/*
+ * We use the fact that the bus frequency is somehow
+ * a multiple of 100000/3 khz, then we compute sgtc according
+ * to this multiple.
+ * That way, we match more how AMD thinks all of that work.
+ * We will then get the same kind of behaviour already tested under
+ * the "well-known" other OS.
+ */
+static int __init fixup_sgtc(void)
+{
+	unsigned int sgtc;
+	unsigned int m;
+
+	m = fsb / 3333;
+	if ((m % 10) >= 5)
+		m += 5;
+
+	m /= 10;
+
+	sgtc = 100 * m * latency;
+	sgtc = sgtc / 3;
+	if (sgtc > 0xfffff) {
+		printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
+		sgtc = 0xfffff;
+	}
+	return sgtc;
+}
+
+static unsigned int powernow_get(unsigned int cpu)
+{
+	union msr_fidvidstatus fidvidstatus;
+	unsigned int cfid;
+
+	if (cpu)
+		return 0;
+	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	cfid = fidvidstatus.bits.CFID;
+
+	return (fsb * fid_codes[cfid] / 10);
+}
+
+
+static int __init acer_cpufreq_pst(struct dmi_system_id *d)
+{
+	printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident);
+	printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
+	printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n");
+	return 0;
+}
+
+/*
+ * Some Athlon laptops have really fucked PST tables.
+ * A BIOS update is all that can save them.
+ * Mention this, and disable cpufreq.
+ */
+static struct dmi_system_id __initdata powernow_dmi_table[] = {
+	{
+		.callback = acer_cpufreq_pst,
+		.ident = "Acer Aspire",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"),
+			DMI_MATCH(DMI_BIOS_VERSION, "3A71"),
+		},
+	},
+	{ }
+};
+
+static int __init powernow_cpu_init (struct cpufreq_policy *policy)
+{
+	union msr_fidvidstatus fidvidstatus;
+	int result;
+
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+
+	/* A K7 with powernow technology is set to max frequency by BIOS */
+	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID];
+	if (!fsb) {
+		printk(KERN_WARNING PFX "can not determine bus frequency\n");
+		return -EINVAL;
+	}
+	dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000);
+
+	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
+		printk (KERN_INFO PFX "PSB/PST known to be broken.  Trying ACPI instead\n");
+		result = powernow_acpi_init();
+	} else {
+		result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID);
+		if (result) {
+			printk (KERN_INFO PFX "Trying ACPI perflib\n");
+			maximum_speed = 0;
+			minimum_speed = -1;
+			latency = 0;
+			result = powernow_acpi_init();
+			if (result) {
+				printk (KERN_INFO PFX "ACPI and legacy methods failed\n");
+				printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml\n");
+			}
+		} else {
+			/* SGTC use the bus clock as timer */
+			latency = fixup_sgtc();
+			printk(KERN_INFO PFX "SGTC: %d\n", latency);
+		}
+	}
+
+	if (result)
+		return result;
+
+	printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
+				minimum_speed/1000, maximum_speed/1000);
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency);
+
+	policy->cur = powernow_get(0);
+
+	cpufreq_frequency_table_get_attr(powernow_table, policy->cpu);
+
+	return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
+}
+
+static int powernow_cpu_exit (struct cpufreq_policy *policy) {
+	cpufreq_frequency_table_put_attr(policy->cpu);
+
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+	if (acpi_processor_perf) {
+		acpi_processor_unregister_performance(acpi_processor_perf, 0);
+		kfree(acpi_processor_perf);
+	}
+#endif
+
+	if (powernow_table)
+		kfree(powernow_table);
+
+	return 0;
+}
+
+static struct freq_attr* powernow_table_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver powernow_driver = {
+	.verify	= powernow_verify,
+	.target	= powernow_target,
+	.get	= powernow_get,
+	.init	= powernow_cpu_init,
+	.exit	= powernow_cpu_exit,
+	.name	= "powernow-k7",
+	.owner	= THIS_MODULE,
+	.attr	= powernow_table_attr,
+};
+
+static int __init powernow_init (void)
+{
+	if (check_powernow()==0)
+		return -ENODEV;
+	return cpufreq_register_driver(&powernow_driver);
+}
+
+
+static void __exit powernow_exit (void)
+{
+	cpufreq_unregister_driver(&powernow_driver);
+}
+
+module_param(acpi_force,  int, 0444);
+MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
+
+MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
+MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
+MODULE_LICENSE ("GPL");
+
+late_initcall(powernow_init);
+module_exit(powernow_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.h b/arch/i386/kernel/cpu/cpufreq/powernow-k7.h
new file mode 100644
index 000000000000..f8a63b3664e3
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.h
@@ -0,0 +1,44 @@
+/*
+ *  $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $
+ *  (C) 2003 Dave Jones.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  AMD-specific information
+ *
+ */
+
+union msr_fidvidctl {
+	struct {
+		unsigned FID:5,			// 4:0
+		reserved1:3,	// 7:5
+		VID:5,			// 12:8
+		reserved2:3,	// 15:13
+		FIDC:1,			// 16
+		VIDC:1,			// 17
+		reserved3:2,	// 19:18
+		FIDCHGRATIO:1,	// 20
+		reserved4:11,	// 31-21
+		SGTC:20,		// 32:51
+		reserved5:12;	// 63:52
+	} bits;
+	unsigned long long val;
+};
+
+union msr_fidvidstatus {
+	struct {
+		unsigned CFID:5,			// 4:0
+		reserved1:3,	// 7:5
+		SFID:5,			// 12:8
+		reserved2:3,	// 15:13
+		MFID:5,			// 20:16
+		reserved3:11,	// 31:21
+		CVID:5,			// 36:32
+		reserved4:3,	// 39:37
+		SVID:5,			// 44:40
+		reserved5:3,	// 47:45
+		MVID:5,			// 52:48
+		reserved6:11;	// 63:53
+	} bits;
+	unsigned long long val;
+};
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
new file mode 100644
index 000000000000..a65ff7e32e5d
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -0,0 +1,1135 @@
+/*
+ *   (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ *
+ *  Support : paul.devriendt@amd.com
+ *
+ *  Based on the powernow-k7.c module written by Dave Jones.
+ *  (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs
+ *  (C) 2004 Dominik Brodowski <linux@brodo.de>
+ *  (C) 2004 Pavel Machek <pavel@suse.cz>
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon datasheets & sample CPUs kindly provided by AMD.
+ *
+ *  Valuable input gratefully received from Dave Jones, Pavel Machek,
+ *  Dominik Brodowski, and others.
+ *  Processor information obtained from Chapter 9 (Power and Thermal Management)
+ *  of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
+ *  Opteron Processors" available for download from www.amd.com
+ *
+ *  Tables for specific CPUs can be infrerred from
+ *	http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#define PFX "powernow-k8: "
+#define BFX PFX "BIOS error: "
+#define VERSION "version 1.00.09e"
+#include "powernow-k8.h"
+
+/* serialize freq changes  */
+static DECLARE_MUTEX(fidvid_sem);
+
+static struct powernow_k8_data *powernow_data[NR_CPUS];
+
+/* Return a frequency in MHz, given an input fid */
+static u32 find_freq_from_fid(u32 fid)
+{
+	return 800 + (fid * 100);
+}
+
+/* Return a frequency in KHz, given an input fid */
+static u32 find_khz_freq_from_fid(u32 fid)
+{
+	return 1000 * find_freq_from_fid(fid);
+}
+
+/* Return a voltage in miliVolts, given an input vid */
+static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid)
+{
+	return 1550-vid*25;
+}
+
+/* Return the vco fid for an input fid
+ *
+ * Each "low" fid has corresponding "high" fid, and you can get to "low" fids
+ * only from corresponding high fids. This returns "high" fid corresponding to
+ * "low" one.
+ */
+static u32 convert_fid_to_vco_fid(u32 fid)
+{
+	if (fid < HI_FID_TABLE_BOTTOM) {
+		return 8 + (2 * fid);
+	} else {
+		return fid;
+	}
+}
+
+/*
+ * Return 1 if the pending bit is set. Unless we just instructed the processor
+ * to transition to a new state, seeing this bit set is really bad news.
+ */
+static int pending_bit_stuck(void)
+{
+	u32 lo, hi;
+
+	rdmsr(MSR_FIDVID_STATUS, lo, hi);
+	return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0;
+}
+
+/*
+ * Update the global current fid / vid values from the status msr.
+ * Returns 1 on error.
+ */
+static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
+{
+	u32 lo, hi;
+	u32 i = 0;
+
+	lo = MSR_S_LO_CHANGE_PENDING;
+	while (lo & MSR_S_LO_CHANGE_PENDING) {
+		if (i++ > 0x1000000) {
+			printk(KERN_ERR PFX "detected change pending stuck\n");
+			return 1;
+		}
+		rdmsr(MSR_FIDVID_STATUS, lo, hi);
+	}
+
+	data->currvid = hi & MSR_S_HI_CURRENT_VID;
+	data->currfid = lo & MSR_S_LO_CURRENT_FID;
+
+	return 0;
+}
+
+/* the isochronous relief time */
+static void count_off_irt(struct powernow_k8_data *data)
+{
+	udelay((1 << data->irt) * 10);
+	return;
+}
+
+/* the voltage stabalization time */
+static void count_off_vst(struct powernow_k8_data *data)
+{
+	udelay(data->vstable * VST_UNITS_20US);
+	return;
+}
+
+/* need to init the control msr to a safe value (for each cpu) */
+static void fidvid_msr_init(void)
+{
+	u32 lo, hi;
+	u8 fid, vid;
+
+	rdmsr(MSR_FIDVID_STATUS, lo, hi);
+	vid = hi & MSR_S_HI_CURRENT_VID;
+	fid = lo & MSR_S_LO_CURRENT_FID;
+	lo = fid | (vid << MSR_C_LO_VID_SHIFT);
+	hi = MSR_C_HI_STP_GNT_BENIGN;
+	dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi);
+	wrmsr(MSR_FIDVID_CTL, lo, hi);
+}
+
+
+/* write the new fid value along with the other control fields to the msr */
+static int write_new_fid(struct powernow_k8_data *data, u32 fid)
+{
+	u32 lo;
+	u32 savevid = data->currvid;
+
+	if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
+		printk(KERN_ERR PFX "internal error - overflow on fid write\n");
+		return 1;
+	}
+
+	lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+
+	dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
+		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
+
+	wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	count_off_irt(data);
+
+	if (savevid != data->currvid) {
+		printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n",
+		       savevid, data->currvid);
+		return 1;
+	}
+
+	if (fid != data->currfid) {
+		printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid,
+		        data->currfid);
+		return 1;
+	}
+
+	return 0;
+}
+
+/* Write a new vid to the hardware */
+static int write_new_vid(struct powernow_k8_data *data, u32 vid)
+{
+	u32 lo;
+	u32 savefid = data->currfid;
+
+	if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
+		printk(KERN_ERR PFX "internal error - overflow on vid write\n");
+		return 1;
+	}
+
+	lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+
+	dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
+		vid, lo, STOP_GRANT_5NS);
+
+	wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (savefid != data->currfid) {
+		printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",
+		       savefid, data->currfid);
+		return 1;
+	}
+
+	if (vid != data->currvid) {
+		printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid,
+				data->currvid);
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Reduce the vid by the max of step or reqvid.
+ * Decreasing vid codes represent increasing voltages:
+ * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off.
+ */
+static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
+{
+	if ((data->currvid - reqvid) > step)
+		reqvid = data->currvid - step;
+
+	if (write_new_vid(data, reqvid))
+		return 1;
+
+	count_off_vst(data);
+
+	return 0;
+}
+
+/* Change the fid and vid, by the 3 phases. */
+static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid)
+{
+	if (core_voltage_pre_transition(data, reqvid))
+		return 1;
+
+	if (core_frequency_transition(data, reqfid))
+		return 1;
+
+	if (core_voltage_post_transition(data, reqvid))
+		return 1;
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
+		printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n",
+				smp_processor_id(),
+				reqfid, reqvid, data->currfid, data->currvid);
+		return 1;
+	}
+
+	dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n",
+		smp_processor_id(), data->currfid, data->currvid);
+
+	return 0;
+}
+
+/* Phase 1 - core voltage transition ... setup voltage */
+static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid)
+{
+	u32 rvosteps = data->rvo;
+	u32 savefid = data->currfid;
+
+	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
+		smp_processor_id(),
+		data->currfid, data->currvid, reqvid, data->rvo);
+
+	while (data->currvid > reqvid) {
+		dprintk("ph1: curr 0x%x, req vid 0x%x\n",
+			data->currvid, reqvid);
+		if (decrease_vid_code_by_step(data, reqvid, data->vidmvs))
+			return 1;
+	}
+
+	while ((rvosteps > 0)  && ((data->rvo + data->currvid) > reqvid)) {
+		if (data->currvid == 0) {
+			rvosteps = 0;
+		} else {
+			dprintk("ph1: changing vid for rvo, req 0x%x\n",
+				data->currvid - 1);
+			if (decrease_vid_code_by_step(data, data->currvid - 1, 1))
+				return 1;
+			rvosteps--;
+		}
+	}
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (savefid != data->currfid) {
+		printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid);
+		return 1;
+	}
+
+	dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n",
+		data->currfid, data->currvid);
+
+	return 0;
+}
+
+/* Phase 2 - core frequency transition */
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
+{
+	u32 vcoreqfid, vcocurrfid, vcofiddiff, savevid = data->currvid;
+
+	if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
+		printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
+			reqfid, data->currfid);
+		return 1;
+	}
+
+	if (data->currfid == reqfid) {
+		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid);
+		return 0;
+	}
+
+	dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n",
+		smp_processor_id(),
+		data->currfid, data->currvid, reqfid);
+
+	vcoreqfid = convert_fid_to_vco_fid(reqfid);
+	vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+	    : vcoreqfid - vcocurrfid;
+
+	while (vcofiddiff > 2) {
+		if (reqfid > data->currfid) {
+			if (data->currfid > LO_FID_TABLE_TOP) {
+				if (write_new_fid(data, data->currfid + 2)) {
+					return 1;
+				}
+			} else {
+				if (write_new_fid
+				    (data, 2 + convert_fid_to_vco_fid(data->currfid))) {
+					return 1;
+				}
+			}
+		} else {
+			if (write_new_fid(data, data->currfid - 2))
+				return 1;
+		}
+
+		vcocurrfid = convert_fid_to_vco_fid(data->currfid);
+		vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
+		    : vcoreqfid - vcocurrfid;
+	}
+
+	if (write_new_fid(data, reqfid))
+		return 1;
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (data->currfid != reqfid) {
+		printk(KERN_ERR PFX
+			"ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n",
+			data->currfid, reqfid);
+		return 1;
+	}
+
+	if (savevid != data->currvid) {
+		printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n",
+			savevid, data->currvid);
+		return 1;
+	}
+
+	dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n",
+		data->currfid, data->currvid);
+
+	return 0;
+}
+
+/* Phase 3 - core voltage transition flow ... jump to the final vid. */
+static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid)
+{
+	u32 savefid = data->currfid;
+	u32 savereqvid = reqvid;
+
+	dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n",
+		smp_processor_id(),
+		data->currfid, data->currvid);
+
+	if (reqvid != data->currvid) {
+		if (write_new_vid(data, reqvid))
+			return 1;
+
+		if (savefid != data->currfid) {
+			printk(KERN_ERR PFX
+			       "ph3: bad fid change, save 0x%x, curr 0x%x\n",
+			       savefid, data->currfid);
+			return 1;
+		}
+
+		if (data->currvid != reqvid) {
+			printk(KERN_ERR PFX
+			       "ph3: failed vid transition\n, req 0x%x, curr 0x%x",
+			       reqvid, data->currvid);
+			return 1;
+		}
+	}
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if (savereqvid != data->currvid) {
+		dprintk("ph3 failed, currvid 0x%x\n", data->currvid);
+		return 1;
+	}
+
+	if (savefid != data->currfid) {
+		dprintk("ph3 failed, currfid changed 0x%x\n",
+			data->currfid);
+		return 1;
+	}
+
+	dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n",
+		data->currfid, data->currvid);
+
+	return 0;
+}
+
+static int check_supported_cpu(unsigned int cpu)
+{
+	cpumask_t oldmask = CPU_MASK_ALL;
+	u32 eax, ebx, ecx, edx;
+	unsigned int rc = 0;
+
+	oldmask = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	schedule();
+
+	if (smp_processor_id() != cpu) {
+		printk(KERN_ERR "limiting to cpu %u failed\n", cpu);
+		goto out;
+	}
+
+	if (current_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		goto out;
+
+	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+	if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
+	    ((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
+	    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) {
+		printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
+		goto out;
+	}
+
+	eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
+	if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
+		printk(KERN_INFO PFX
+		       "No frequency change capabilities detected\n");
+		goto out;
+	}
+
+	cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+	if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
+		printk(KERN_INFO PFX "Power state transitions not supported\n");
+		goto out;
+	}
+
+	rc = 1;
+
+out:
+	set_cpus_allowed(current, oldmask);
+	schedule();
+	return rc;
+
+}
+
+static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+{
+	unsigned int j;
+	u8 lastfid = 0xff;
+
+	for (j = 0; j < data->numps; j++) {
+		if (pst[j].vid > LEAST_VID) {
+			printk(KERN_ERR PFX "vid %d invalid : 0x%x\n", j, pst[j].vid);
+			return -EINVAL;
+		}
+		if (pst[j].vid < data->rvo) {	/* vid + rvo >= 0 */
+			printk(KERN_ERR BFX "0 vid exceeded with pstate %d\n", j);
+			return -ENODEV;
+		}
+		if (pst[j].vid < maxvid + data->rvo) {	/* vid + rvo >= maxvid */
+			printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j);
+			return -ENODEV;
+		}
+		if ((pst[j].fid > MAX_FID)
+		    || (pst[j].fid & 1)
+		    || (j && (pst[j].fid < HI_FID_TABLE_BOTTOM))) {
+			/* Only first fid is allowed to be in "low" range */
+			printk(KERN_ERR PFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
+			return -EINVAL;
+		}
+		if (pst[j].fid < lastfid)
+			lastfid = pst[j].fid;
+	}
+	if (lastfid & 1) {
+		printk(KERN_ERR PFX "lastfid invalid\n");
+		return -EINVAL;
+	}
+	if (lastfid > LO_FID_TABLE_TOP)
+		printk(KERN_INFO PFX  "first fid not from lo freq table\n");
+
+	return 0;
+}
+
+static void print_basics(struct powernow_k8_data *data)
+{
+	int j;
+	for (j = 0; j < data->numps; j++) {
+		if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID)
+			printk(KERN_INFO PFX "   %d : fid 0x%x (%d MHz), vid 0x%x (%d mV)\n", j,
+				data->powernow_table[j].index & 0xff,
+				data->powernow_table[j].frequency/1000,
+				data->powernow_table[j].index >> 8,
+				find_millivolts_from_vid(data, data->powernow_table[j].index >> 8));
+	}
+	if (data->batps)
+		printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps);
+}
+
+static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+{
+	struct cpufreq_frequency_table *powernow_table;
+	unsigned int j;
+
+	if (data->batps) {    /* use ACPI support to get full speed on mains power */
+		printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps);
+		data->numps = data->batps;
+	}
+
+	for ( j=1; j<data->numps; j++ ) {
+		if (pst[j-1].fid >= pst[j].fid) {
+			printk(KERN_ERR PFX "PST out of sequence\n");
+			return -EINVAL;
+		}
+	}
+
+	if (data->numps < 2) {
+		printk(KERN_ERR PFX "no p states to transition\n");
+		return -ENODEV;
+	}
+
+	if (check_pst_table(data, pst, maxvid))
+		return -EINVAL;
+
+	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
+		* (data->numps + 1)), GFP_KERNEL);
+	if (!powernow_table) {
+		printk(KERN_ERR PFX "powernow_table memory alloc failure\n");
+		return -ENOMEM;
+	}
+
+	for (j = 0; j < data->numps; j++) {
+		powernow_table[j].index = pst[j].fid; /* lower 8 bits */
+		powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
+		powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid);
+	}
+	powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
+	powernow_table[data->numps].index = 0;
+
+	if (query_current_values_with_pending_wait(data)) {
+		kfree(powernow_table);
+		return -EIO;
+	}
+
+	dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
+	data->powernow_table = powernow_table;
+	print_basics(data);
+
+	for (j = 0; j < data->numps; j++)
+		if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid))
+			return 0;
+
+	dprintk("currfid/vid do not match PST, ignoring\n");
+	return 0;
+}
+
+/* Find and validate the PSB/PST table in BIOS. */
+static int find_psb_table(struct powernow_k8_data *data)
+{
+	struct psb_s *psb;
+	unsigned int i;
+	u32 mvs;
+	u8 maxvid;
+	u32 cpst = 0;
+	u32 thiscpuid;
+
+	for (i = 0xc0000; i < 0xffff0; i += 0x10) {
+		/* Scan BIOS looking for the signature. */
+		/* It can not be at ffff0 - it is too big. */
+
+		psb = phys_to_virt(i);
+		if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0)
+			continue;
+
+		dprintk("found PSB header at 0x%p\n", psb);
+
+		dprintk("table vers: 0x%x\n", psb->tableversion);
+		if (psb->tableversion != PSB_VERSION_1_4) {
+			printk(KERN_INFO BFX "PSB table is not v1.4\n");
+			return -ENODEV;
+		}
+
+		dprintk("flags: 0x%x\n", psb->flags1);
+		if (psb->flags1) {
+			printk(KERN_ERR BFX "unknown flags\n");
+			return -ENODEV;
+		}
+
+		data->vstable = psb->vstable;
+		dprintk("voltage stabilization time: %d(*20us)\n", data->vstable);
+
+		dprintk("flags2: 0x%x\n", psb->flags2);
+		data->rvo = psb->flags2 & 3;
+		data->irt = ((psb->flags2) >> 2) & 3;
+		mvs = ((psb->flags2) >> 4) & 3;
+		data->vidmvs = 1 << mvs;
+		data->batps = ((psb->flags2) >> 6) & 3;
+
+		dprintk("ramp voltage offset: %d\n", data->rvo);
+		dprintk("isochronous relief time: %d\n", data->irt);
+		dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs);
+
+		dprintk("numpst: 0x%x\n", psb->num_tables);
+		cpst = psb->num_tables;
+		if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){
+			thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+			if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) {
+				cpst = 1;
+			}
+		}
+		if (cpst != 1) {
+			printk(KERN_ERR BFX "numpst must be 1\n");
+			return -ENODEV;
+		}
+
+		data->plllock = psb->plllocktime;
+		dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime);
+		dprintk("maxfid: 0x%x\n", psb->maxfid);
+		dprintk("maxvid: 0x%x\n", psb->maxvid);
+		maxvid = psb->maxvid;
+
+		data->numps = psb->numps;
+		dprintk("numpstates: 0x%x\n", data->numps);
+		return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid);
+	}
+	/*
+	 * If you see this message, complain to BIOS manufacturer. If
+	 * he tells you "we do not support Linux" or some similar
+	 * nonsense, remember that Windows 2000 uses the same legacy
+	 * mechanism that the old Linux PSB driver uses. Tell them it
+	 * is broken with Windows 2000.
+	 *
+	 * The reference to the AMD documentation is chapter 9 in the
+	 * BIOS and Kernel Developer's Guide, which is available on
+	 * www.amd.com
+	 */
+	printk(KERN_ERR PFX "BIOS error - no PSB\n");
+	return -ENODEV;
+}
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
+{
+	if (!data->acpi_data.state_count)
+		return;
+
+	data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
+	data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
+	data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
+	data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
+	data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
+}
+
+static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
+{
+	int i;
+	int cntlofreq = 0;
+	struct cpufreq_frequency_table *powernow_table;
+
+	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
+		dprintk("register performance failed\n");
+		return -EIO;
+	}
+
+	/* verify the data contained in the ACPI structures */
+	if (data->acpi_data.state_count <= 1) {
+		dprintk("No ACPI P-States\n");
+		goto err_out;
+	}
+
+	if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+		(data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+		dprintk("Invalid control/status registers (%x - %x)\n",
+			data->acpi_data.control_register.space_id,
+			data->acpi_data.status_register.space_id);
+		goto err_out;
+	}
+
+	/* fill in data->powernow_table */
+	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
+		* (data->acpi_data.state_count + 1)), GFP_KERNEL);
+	if (!powernow_table) {
+		dprintk("powernow_table memory alloc failure\n");
+		goto err_out;
+	}
+
+	for (i = 0; i < data->acpi_data.state_count; i++) {
+		u32 fid = data->acpi_data.states[i].control & FID_MASK;
+		u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+
+		dprintk("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
+
+		powernow_table[i].index = fid; /* lower 8 bits */
+		powernow_table[i].index |= (vid << 8); /* upper 8 bits */
+		powernow_table[i].frequency = find_khz_freq_from_fid(fid);
+
+		/* verify frequency is OK */
+		if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) ||
+			(powernow_table[i].frequency < (MIN_FREQ * 1000))) {
+			dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency);
+			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			continue;
+		}
+
+		/* verify voltage is OK - BIOSs are using "off" to indicate invalid */
+		if (vid == 0x1f) {
+			dprintk("invalid vid %u, ignoring\n", vid);
+			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			continue;
+		}
+
+ 		if (fid < HI_FID_TABLE_BOTTOM) {
+ 			if (cntlofreq) {
+ 				/* if both entries are the same, ignore this
+ 				 * one... 
+ 				 */
+ 				if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
+ 				    (powernow_table[i].index != powernow_table[cntlofreq].index)) {
+ 					printk(KERN_ERR PFX "Too many lo freq table entries\n");
+ 					goto err_out_mem;
+ 				}
+				
+ 				dprintk("double low frequency table entry, ignoring it.\n");
+ 				powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ 				continue;
+ 			} else
+ 				cntlofreq = i;
+		}
+
+		if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
+			printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
+				powernow_table[i].frequency,
+				(unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
+			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			continue;
+		}
+	}
+
+	powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+	powernow_table[data->acpi_data.state_count].index = 0;
+	data->powernow_table = powernow_table;
+
+	/* fill in data */
+	data->numps = data->acpi_data.state_count;
+	print_basics(data);
+	powernow_k8_acpi_pst_values(data, 0);
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	return 0;
+
+err_out_mem:
+	kfree(powernow_table);
+
+err_out:
+	acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+
+	/* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
+	data->acpi_data.state_count = 0;
+
+	return -ENODEV;
+}
+
+static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
+{
+	if (data->acpi_data.state_count)
+		acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+}
+
+#else
+static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
+static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
+#endif /* CONFIG_X86_POWERNOW_K8_ACPI */
+
+/* Take a frequency, and issue the fid/vid transition command */
+static int transition_frequency(struct powernow_k8_data *data, unsigned int index)
+{
+	u32 fid;
+	u32 vid;
+	int res;
+	struct cpufreq_freqs freqs;
+
+	dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+
+	/* fid are the lower 8 bits of the index we stored into
+	 * the cpufreq frequency table in find_psb_table, vid are 
+	 * the upper 8 bits.
+	 */
+
+	fid = data->powernow_table[index].index & 0xFF;
+	vid = (data->powernow_table[index].index & 0xFF00) >> 8;
+
+	dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid);
+
+	if (query_current_values_with_pending_wait(data))
+		return 1;
+
+	if ((data->currvid == vid) && (data->currfid == fid)) {
+		dprintk("target matches current values (fid 0x%x, vid 0x%x)\n",
+			fid, vid);
+		return 0;
+	}
+
+	if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
+		printk("ignoring illegal change in lo freq table-%x to 0x%x\n",
+		       data->currfid, fid);
+		return 1;
+	}
+
+	dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
+		smp_processor_id(), fid, vid);
+
+	freqs.cpu = data->cpu;
+
+	freqs.old = find_khz_freq_from_fid(data->currfid);
+	freqs.new = find_khz_freq_from_fid(fid);
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	down(&fidvid_sem);
+	res = transition_fid_vid(data, fid, vid);
+	up(&fidvid_sem);
+
+	freqs.new = find_khz_freq_from_fid(data->currfid);
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return res;
+}
+
+/* Driver entry point to switch to the target frequency */
+static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
+{
+	cpumask_t oldmask = CPU_MASK_ALL;
+	struct powernow_k8_data *data = powernow_data[pol->cpu];
+	u32 checkfid = data->currfid;
+	u32 checkvid = data->currvid;
+	unsigned int newstate;
+	int ret = -EIO;
+
+	/* only run on specific CPU from here on */
+	oldmask = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
+	schedule();
+
+	if (smp_processor_id() != pol->cpu) {
+		printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+		goto err_out;
+	}
+
+	if (pending_bit_stuck()) {
+		printk(KERN_ERR PFX "failing targ, change pending bit set\n");
+		goto err_out;
+	}
+
+	dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
+		pol->cpu, targfreq, pol->min, pol->max, relation);
+
+	if (query_current_values_with_pending_wait(data)) {
+		ret = -EIO;
+		goto err_out;
+	}
+
+	dprintk("targ: curr fid 0x%x, vid 0x%x\n",
+		data->currfid, data->currvid);
+
+	if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
+		printk(KERN_ERR PFX
+		       "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n",
+		       checkfid, data->currfid, checkvid, data->currvid);
+	}
+
+	if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
+		goto err_out;
+
+	powernow_k8_acpi_pst_values(data, newstate);
+
+	if (transition_frequency(data, newstate)) {
+		printk(KERN_ERR PFX "transition frequency failed\n");
+		ret = 1;
+		goto err_out;
+	}
+
+	pol->cur = find_khz_freq_from_fid(data->currfid);
+	ret = 0;
+
+err_out:
+	set_cpus_allowed(current, oldmask);
+	schedule();
+
+	return ret;
+}
+
+/* Driver entry point to verify the policy and range of frequencies */
+static int powernowk8_verify(struct cpufreq_policy *pol)
+{
+	struct powernow_k8_data *data = powernow_data[pol->cpu];
+
+	return cpufreq_frequency_table_verify(pol, data->powernow_table);
+}
+
+/* per CPU init entry point to the driver */
+static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
+{
+	struct powernow_k8_data *data;
+	cpumask_t oldmask = CPU_MASK_ALL;
+	int rc;
+
+	if (!check_supported_cpu(pol->cpu))
+		return -ENODEV;
+
+	data = kmalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
+	if (!data) {
+		printk(KERN_ERR PFX "unable to alloc powernow_k8_data");
+		return -ENOMEM;
+	}
+	memset(data,0,sizeof(struct powernow_k8_data));
+
+	data->cpu = pol->cpu;
+
+	if (powernow_k8_cpu_init_acpi(data)) {
+		/*
+		 * Use the PSB BIOS structure. This is only availabe on
+		 * an UP version, and is deprecated by AMD.
+		 */
+
+		if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
+			printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n");
+			kfree(data);
+			return -ENODEV;
+		}
+		if (pol->cpu != 0) {
+			printk(KERN_ERR PFX "init not cpu 0\n");
+			kfree(data);
+			return -ENODEV;
+		}
+		rc = find_psb_table(data);
+		if (rc) {
+			kfree(data);
+			return -ENODEV;
+		}
+	}
+
+	/* only run on specific CPU from here on */
+	oldmask = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
+	schedule();
+
+	if (smp_processor_id() != pol->cpu) {
+		printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+		goto err_out;
+	}
+
+	if (pending_bit_stuck()) {
+		printk(KERN_ERR PFX "failing init, change pending bit set\n");
+		goto err_out;
+	}
+
+	if (query_current_values_with_pending_wait(data))
+		goto err_out;
+
+	fidvid_msr_init();
+
+	/* run on any CPU again */
+	set_cpus_allowed(current, oldmask);
+	schedule();
+
+	pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/* Take a crude guess here. 
+	 * That guess was in microseconds, so multiply with 1000 */
+	pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
+	    + (3 * (1 << data->irt) * 10)) * 1000;
+
+	pol->cur = find_khz_freq_from_fid(data->currfid);
+	dprintk("policy current frequency %d kHz\n", pol->cur);
+
+	/* min/max the cpu is capable of */
+	if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
+		printk(KERN_ERR PFX "invalid powernow_table\n");
+		powernow_k8_cpu_exit_acpi(data);
+		kfree(data->powernow_table);
+		kfree(data);
+		return -EINVAL;
+	}
+
+	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
+
+	printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
+	       data->currfid, data->currvid);
+
+	powernow_data[pol->cpu] = data;
+
+	return 0;
+
+err_out:
+	set_cpus_allowed(current, oldmask);
+	schedule();
+	powernow_k8_cpu_exit_acpi(data);
+
+	kfree(data);
+	return -ENODEV;
+}
+
+static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol)
+{
+	struct powernow_k8_data *data = powernow_data[pol->cpu];
+
+	if (!data)
+		return -EINVAL;
+
+	powernow_k8_cpu_exit_acpi(data);
+
+	cpufreq_frequency_table_put_attr(pol->cpu);
+
+	kfree(data->powernow_table);
+	kfree(data);
+
+	return 0;
+}
+
+static unsigned int powernowk8_get (unsigned int cpu)
+{
+	struct powernow_k8_data *data = powernow_data[cpu];
+	cpumask_t oldmask = current->cpus_allowed;
+	unsigned int khz = 0;
+
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	if (smp_processor_id() != cpu) {
+		printk(KERN_ERR PFX "limiting to CPU %d failed in powernowk8_get\n", cpu);
+		set_cpus_allowed(current, oldmask);
+		return 0;
+	}
+	preempt_disable();
+
+	if (query_current_values_with_pending_wait(data))
+		goto out;
+
+	khz = find_khz_freq_from_fid(data->currfid);
+
+ out:
+	preempt_enable_no_resched();
+	set_cpus_allowed(current, oldmask);
+
+	return khz;
+}
+
+static struct freq_attr* powernow_k8_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver cpufreq_amd64_driver = {
+	.verify = powernowk8_verify,
+	.target = powernowk8_target,
+	.init = powernowk8_cpu_init,
+	.exit = __devexit_p(powernowk8_cpu_exit),
+	.get = powernowk8_get,
+	.name = "powernow-k8",
+	.owner = THIS_MODULE,
+	.attr = powernow_k8_attr,
+};
+
+/* driver entry point for init */
+static int __init powernowk8_init(void)
+{
+	unsigned int i, supported_cpus = 0;
+
+	for (i=0; i<NR_CPUS; i++) {
+		if (!cpu_online(i))
+			continue;
+		if (check_supported_cpu(i))
+			supported_cpus++;
+	}
+
+	if (supported_cpus == num_online_cpus()) {
+		printk(KERN_INFO PFX "Found %d AMD Athlon 64 / Opteron processors (" VERSION ")\n",
+			supported_cpus);
+		return cpufreq_register_driver(&cpufreq_amd64_driver);
+	}
+
+	return -ENODEV;
+}
+
+/* driver entry point for term */
+static void __exit powernowk8_exit(void)
+{
+	dprintk("exit\n");
+
+	cpufreq_unregister_driver(&cpufreq_amd64_driver);
+}
+
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
+MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
+MODULE_LICENSE("GPL");
+
+late_initcall(powernowk8_init);
+module_exit(powernowk8_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
new file mode 100644
index 000000000000..63ebc8470f52
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -0,0 +1,176 @@
+/*
+ *  (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ */
+
+struct powernow_k8_data {
+	unsigned int cpu;
+
+	u32 numps;  /* number of p-states */
+	u32 batps;  /* number of p-states supported on battery */
+
+	/* these values are constant when the PSB is used to determine
+	 * vid/fid pairings, but are modified during the ->target() call
+	 * when ACPI is used */
+	u32 rvo;     /* ramp voltage offset */
+	u32 irt;     /* isochronous relief time */
+	u32 vidmvs;  /* usable value calculated from mvs */
+	u32 vstable; /* voltage stabilization time, units 20 us */
+	u32 plllock; /* pll lock time, units 1 us */
+
+	/* keep track of the current fid / vid */
+	u32 currvid, currfid;
+
+	/* the powernow_table includes all frequency and vid/fid pairings:
+	 * fid are the lower 8 bits of the index, vid are the upper 8 bits.
+	 * frequency is in kHz */
+	struct cpufreq_frequency_table  *powernow_table;
+
+#ifdef CONFIG_X86_POWERNOW_K8_ACPI
+	/* the acpi table needs to be kept. it's only available if ACPI was
+	 * used to determine valid frequency/vid/fid states */
+	struct acpi_processor_performance acpi_data;
+#endif
+};
+
+
+/* processor's cpuid instruction support */
+#define CPUID_PROCESSOR_SIGNATURE	1	/* function 1 */
+#define CPUID_XFAM			0x0ff00000	/* extended family */
+#define CPUID_XFAM_K8			0
+#define CPUID_XMOD			0x000f0000	/* extended model */
+#define CPUID_XMOD_REV_E		0x00020000
+#define CPUID_USE_XFAM_XMOD		0x00000f00
+#define CPUID_GET_MAX_CAPABILITIES	0x80000000
+#define CPUID_FREQ_VOLT_CAPABILITIES	0x80000007
+#define P_STATE_TRANSITION_CAPABLE	6
+
+/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For     */
+/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and   */
+/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */
+/* the register number is placed in ecx, and the data is returned in edx:eax. */
+
+#define MSR_FIDVID_CTL      0xc0010041
+#define MSR_FIDVID_STATUS   0xc0010042
+
+/* Field definitions within the FID VID Low Control MSR : */
+#define MSR_C_LO_INIT_FID_VID     0x00010000
+#define MSR_C_LO_NEW_VID          0x00001f00
+#define MSR_C_LO_NEW_FID          0x0000002f
+#define MSR_C_LO_VID_SHIFT        8
+
+/* Field definitions within the FID VID High Control MSR : */
+#define MSR_C_HI_STP_GNT_TO       0x000fffff
+
+/* Field definitions within the FID VID Low Status MSR : */
+#define MSR_S_LO_CHANGE_PENDING   0x80000000	/* cleared when completed */
+#define MSR_S_LO_MAX_RAMP_VID     0x1f000000
+#define MSR_S_LO_MAX_FID          0x003f0000
+#define MSR_S_LO_START_FID        0x00003f00
+#define MSR_S_LO_CURRENT_FID      0x0000003f
+
+/* Field definitions within the FID VID High Status MSR : */
+#define MSR_S_HI_MAX_WORKING_VID  0x001f0000
+#define MSR_S_HI_START_VID        0x00001f00
+#define MSR_S_HI_CURRENT_VID      0x0000001f
+#define MSR_C_HI_STP_GNT_BENIGN   0x00000001
+
+/*
+ * There are restrictions frequencies have to follow:
+ * - only 1 entry in the low fid table ( <=1.4GHz )
+ * - lowest entry in the high fid table must be >= 2 * the entry in the
+ *   low fid table
+ * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry
+ *   in the low fid table
+ * - the parts can only step at 200 MHz intervals, so 1.9 GHz is never valid
+ * - lowest frequency must be >= interprocessor hypertransport link speed
+ *   (only applies to MP systems obviously)
+ */
+
+/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */
+#define LO_FID_TABLE_TOP     6	/* fid values marking the boundary    */
+#define HI_FID_TABLE_BOTTOM  8	/* between the low and high tables    */
+
+#define LO_VCOFREQ_TABLE_TOP    1400	/* corresponding vco frequency values */
+#define HI_VCOFREQ_TABLE_BOTTOM 1600
+
+#define MIN_FREQ_RESOLUTION  200 /* fids jump by 2 matching freq jumps by 200 */
+
+#define MAX_FID 0x2a	/* Spec only gives FID values as far as 5 GHz */
+#define LEAST_VID 0x1e	/* Lowest (numerically highest) useful vid value */
+
+#define MIN_FREQ 800	/* Min and max freqs, per spec */
+#define MAX_FREQ 5000
+
+#define INVALID_FID_MASK 0xffffffc1  /* not a valid fid if these bits are set */
+#define INVALID_VID_MASK 0xffffffe0  /* not a valid vid if these bits are set */
+
+#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
+
+#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */
+
+#define MAXIMUM_VID_STEPS 1  /* Current cpus only allow a single step of 25mV */
+#define VST_UNITS_20US 20   /* Voltage Stabalization Time is in units of 20us */
+
+/*
+ * Most values of interest are enocoded in a single field of the _PSS
+ * entries: the "control" value.
+ */
+                                                                                                    
+#define IRT_SHIFT      30
+#define RVO_SHIFT      28
+#define PLL_L_SHIFT    20
+#define MVS_SHIFT      18
+#define VST_SHIFT      11
+#define VID_SHIFT       6
+#define IRT_MASK        3
+#define RVO_MASK        3
+#define PLL_L_MASK   0x7f
+#define MVS_MASK        3
+#define VST_MASK     0x7f
+#define VID_MASK     0x1f
+#define FID_MASK     0x3f
+
+
+/*
+ * Version 1.4 of the PSB table. This table is constructed by BIOS and is
+ * to tell the OS's power management driver which VIDs and FIDs are
+ * supported by this particular processor.
+ * If the data in the PSB / PST is wrong, then this driver will program the
+ * wrong values into hardware, which is very likely to lead to a crash.
+ */
+
+#define PSB_ID_STRING      "AMDK7PNOW!"
+#define PSB_ID_STRING_LEN  10
+
+#define PSB_VERSION_1_4  0x14
+
+struct psb_s {
+	u8 signature[10];
+	u8 tableversion;
+	u8 flags1;
+	u16 vstable;
+	u8 flags2;
+	u8 num_tables;
+	u32 cpuid;
+	u8 plllocktime;
+	u8 maxfid;
+	u8 maxvid;
+	u8 numps;
+};
+
+/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */
+struct pst_s {
+	u8 fid;
+	u8 vid;
+};
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
+
+static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
+
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
new file mode 100644
index 000000000000..07d5612dc00f
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -0,0 +1,715 @@
+/*
+ * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
+ * M (part of the Centrino chipset).
+ *
+ * Despite the "SpeedStep" in the name, this is almost entirely unlike
+ * traditional SpeedStep.
+ *
+ * Modelled on speedstep.c
+ *
+ * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
+ *
+ * WARNING WARNING WARNING
+ *
+ * This driver manipulates the PERF_CTL MSR, which is only somewhat
+ * documented.  While it seems to work on my laptop, it has not been
+ * tested anywhere else, and it may not work for you, do strange
+ * things or simply crash.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/compiler.h>
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+
+#include "speedstep-est-common.h"
+
+#define PFX		"speedstep-centrino: "
+#define MAINTAINER	"Jeremy Fitzhardinge <jeremy@goop.org>"
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+
+
+struct cpu_id
+{
+	__u8	x86;            /* CPU family */
+	__u8	x86_model;	/* model */
+	__u8	x86_mask;	/* stepping */
+};
+
+enum {
+	CPU_BANIAS,
+	CPU_DOTHAN_A1,
+	CPU_DOTHAN_A2,
+	CPU_DOTHAN_B0,
+};
+
+static const struct cpu_id cpu_ids[] = {
+	[CPU_BANIAS]	= { 6,  9, 5 },
+	[CPU_DOTHAN_A1]	= { 6, 13, 1 },
+	[CPU_DOTHAN_A2]	= { 6, 13, 2 },
+	[CPU_DOTHAN_B0]	= { 6, 13, 6 },
+};
+#define N_IDS	(sizeof(cpu_ids)/sizeof(cpu_ids[0]))
+
+struct cpu_model
+{
+	const struct cpu_id *cpu_id;
+	const char	*model_name;
+	unsigned	max_freq; /* max clock in kHz */
+
+	struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
+};
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x);
+
+/* Operating points for current CPU */
+static struct cpu_model *centrino_model[NR_CPUS];
+static const struct cpu_id *centrino_cpu[NR_CPUS];
+
+static struct cpufreq_driver centrino_driver;
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
+
+/* Computes the correct form for IA32_PERF_CTL MSR for a particular
+   frequency/voltage operating point; frequency in MHz, volts in mV.
+   This is stored as "index" in the structure. */
+#define OP(mhz, mv)							\
+	{								\
+		.frequency = (mhz) * 1000,				\
+		.index = (((mhz)/100) << 8) | ((mv - 700) / 16)		\
+	}
+
+/*
+ * These voltage tables were derived from the Intel Pentium M
+ * datasheet, document 25261202.pdf, Table 5.  I have verified they
+ * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
+ * M.
+ */
+
+/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
+static struct cpufreq_frequency_table banias_900[] =
+{
+	OP(600,  844),
+	OP(800,  988),
+	OP(900, 1004),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
+static struct cpufreq_frequency_table banias_1000[] =
+{
+	OP(600,   844),
+	OP(800,   972),
+	OP(900,   988),
+	OP(1000, 1004),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
+static struct cpufreq_frequency_table banias_1100[] =
+{
+	OP( 600,  956),
+	OP( 800, 1020),
+	OP( 900, 1100),
+	OP(1000, 1164),
+	OP(1100, 1180),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+
+/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
+static struct cpufreq_frequency_table banias_1200[] =
+{
+	OP( 600,  956),
+	OP( 800, 1004),
+	OP( 900, 1020),
+	OP(1000, 1100),
+	OP(1100, 1164),
+	OP(1200, 1180),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.30GHz (Banias) */
+static struct cpufreq_frequency_table banias_1300[] =
+{
+	OP( 600,  956),
+	OP( 800, 1260),
+	OP(1000, 1292),
+	OP(1200, 1356),
+	OP(1300, 1388),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.40GHz (Banias) */
+static struct cpufreq_frequency_table banias_1400[] =
+{
+	OP( 600,  956),
+	OP( 800, 1180),
+	OP(1000, 1308),
+	OP(1200, 1436),
+	OP(1400, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.50GHz (Banias) */
+static struct cpufreq_frequency_table banias_1500[] =
+{
+	OP( 600,  956),
+	OP( 800, 1116),
+	OP(1000, 1228),
+	OP(1200, 1356),
+	OP(1400, 1452),
+	OP(1500, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.60GHz (Banias) */
+static struct cpufreq_frequency_table banias_1600[] =
+{
+	OP( 600,  956),
+	OP( 800, 1036),
+	OP(1000, 1164),
+	OP(1200, 1276),
+	OP(1400, 1420),
+	OP(1600, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+
+/* Intel Pentium M processor 1.70GHz (Banias) */
+static struct cpufreq_frequency_table banias_1700[] =
+{
+	OP( 600,  956),
+	OP( 800, 1004),
+	OP(1000, 1116),
+	OP(1200, 1228),
+	OP(1400, 1308),
+	OP(1700, 1484),
+	{ .frequency = CPUFREQ_TABLE_END }
+};
+#undef OP
+
+#define _BANIAS(cpuid, max, name)	\
+{	.cpu_id		= cpuid,	\
+	.model_name	= "Intel(R) Pentium(R) M processor " name "MHz", \
+	.max_freq	= (max)*1000,	\
+	.op_points	= banias_##max,	\
+}
+#define BANIAS(max)	_BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
+
+/* CPU models, their operating frequency range, and freq/voltage
+   operating points */
+static struct cpu_model models[] =
+{
+	_BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
+	BANIAS(1000),
+	BANIAS(1100),
+	BANIAS(1200),
+	BANIAS(1300),
+	BANIAS(1400),
+	BANIAS(1500),
+	BANIAS(1600),
+	BANIAS(1700),
+
+	/* NULL model_name is a wildcard */
+	{ &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
+	{ &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
+	{ &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
+
+	{ NULL, }
+};
+#undef _BANIAS
+#undef BANIAS
+
+static int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu];
+	struct cpu_model *model;
+
+	for(model = models; model->cpu_id != NULL; model++)
+		if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
+		    (model->model_name == NULL ||
+		     strcmp(cpu->x86_model_id, model->model_name) == 0))
+			break;
+
+	if (model->cpu_id == NULL) {
+		/* No match at all */
+		dprintk(KERN_INFO PFX "no support for CPU model \"%s\": "
+		       "send /proc/cpuinfo to " MAINTAINER "\n",
+		       cpu->x86_model_id);
+		return -ENOENT;
+	}
+
+	if (model->op_points == NULL) {
+		/* Matched a non-match */
+		dprintk(KERN_INFO PFX "no table support for CPU model \"%s\": \n",
+		       cpu->x86_model_id);
+#ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+		dprintk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n");
+#endif
+		return -ENOENT;
+	}
+
+	centrino_model[policy->cpu] = model;
+
+	dprintk("found \"%s\": max frequency: %dkHz\n",
+	       model->model_name, model->max_freq);
+
+	return 0;
+}
+
+#else
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; }
+#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
+
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x)
+{
+	if ((c->x86 == x->x86) &&
+	    (c->x86_model == x->x86_model) &&
+	    (c->x86_mask == x->x86_mask))
+		return 1;
+	return 0;
+}
+
+/* To be called only after centrino_model is initialized */
+static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
+{
+	int i;
+
+	/*
+	 * Extract clock in kHz from PERF_CTL value
+	 * for centrino, as some DSDTs are buggy.
+	 * Ideally, this can be done using the acpi_data structure.
+	 */
+	if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) ||
+	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) ||
+	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) {
+		msr = (msr >> 8) & 0xff;
+		return msr * 100000;
+	}
+
+	if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points))
+		return 0;
+
+	msr &= 0xffff;
+	for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) {
+		if (msr == centrino_model[cpu]->op_points[i].index)
+			return centrino_model[cpu]->op_points[i].frequency;
+	}
+	if (failsafe)
+		return centrino_model[cpu]->op_points[i-1].frequency;
+	else
+		return 0;
+}
+
+/* Return the current CPU frequency in kHz */
+static unsigned int get_cur_freq(unsigned int cpu)
+{
+	unsigned l, h;
+	unsigned clock_freq;
+	cpumask_t saved_mask;
+
+	saved_mask = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	if (smp_processor_id() != cpu)
+		return 0;
+
+	rdmsr(MSR_IA32_PERF_STATUS, l, h);
+	clock_freq = extract_clock(l, cpu, 0);
+
+	if (unlikely(clock_freq == 0)) {
+		/*
+		 * On some CPUs, we can see transient MSR values (which are
+		 * not present in _PSS), while CPU is doing some automatic
+		 * P-state transition (like TM2). Get the last freq set 
+		 * in PERF_CTL.
+		 */
+		rdmsr(MSR_IA32_PERF_CTL, l, h);
+		clock_freq = extract_clock(l, cpu, 1);
+	}
+
+	set_cpus_allowed(current, saved_mask);
+	return clock_freq;
+}
+
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+
+static struct acpi_processor_performance p;
+
+/*
+ * centrino_cpu_init_acpi - register with ACPI P-States library
+ *
+ * Register with the ACPI P-States library (part of drivers/acpi/processor.c)
+ * in order to determine correct frequency and voltage pairings by reading
+ * the _PSS of the ACPI DSDT or SSDT tables.
+ */
+static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
+{
+	union acpi_object		arg0 = {ACPI_TYPE_BUFFER};
+	u32				arg0_buf[3];
+	struct acpi_object_list		arg_list = {1, &arg0};
+	unsigned long			cur_freq;
+	int				result = 0, i;
+	unsigned int			cpu = policy->cpu;
+
+	/* _PDC settings */
+	arg0.buffer.length = 12;
+	arg0.buffer.pointer = (u8 *) arg0_buf;
+	arg0_buf[0] = ACPI_PDC_REVISION_ID;
+	arg0_buf[1] = 1;
+	arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_MSR;
+
+	p.pdc = &arg_list;
+
+	/* register with ACPI core */
+	if (acpi_processor_register_performance(&p, cpu)) {
+		dprintk(KERN_INFO PFX "obtaining ACPI data failed\n");
+		return -EIO;
+	}
+
+	/* verify the acpi_data */
+	if (p.state_count <= 1) {
+		dprintk("No P-States\n");
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	if ((p.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+	    (p.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+		dprintk("Invalid control/status registers (%x - %x)\n",
+			p.control_register.space_id, p.status_register.space_id);
+		result = -EIO;
+		goto err_unreg;
+	}
+
+	for (i=0; i<p.state_count; i++) {
+		if (p.states[i].control != p.states[i].status) {
+			dprintk("Different control (%x) and status values (%x)\n",
+				p.states[i].control, p.states[i].status);
+			result = -EINVAL;
+			goto err_unreg;
+		}
+
+		if (!p.states[i].core_frequency) {
+			dprintk("Zero core frequency for state %u\n", i);
+			result = -EINVAL;
+			goto err_unreg;
+		}
+
+		if (p.states[i].core_frequency > p.states[0].core_frequency) {
+			dprintk("P%u has larger frequency (%u) than P0 (%u), skipping\n", i,
+				p.states[i].core_frequency, p.states[0].core_frequency);
+			p.states[i].core_frequency = 0;
+			continue;
+		}
+	}
+
+	centrino_model[cpu] = kmalloc(sizeof(struct cpu_model), GFP_KERNEL);
+	if (!centrino_model[cpu]) {
+		result = -ENOMEM;
+		goto err_unreg;
+	}
+	memset(centrino_model[cpu], 0, sizeof(struct cpu_model));
+
+	centrino_model[cpu]->model_name=NULL;
+	centrino_model[cpu]->max_freq = p.states[0].core_frequency * 1000;
+	centrino_model[cpu]->op_points =  kmalloc(sizeof(struct cpufreq_frequency_table) *
+					     (p.state_count + 1), GFP_KERNEL);
+        if (!centrino_model[cpu]->op_points) {
+                result = -ENOMEM;
+                goto err_kfree;
+        }
+
+        for (i=0; i<p.state_count; i++) {
+		centrino_model[cpu]->op_points[i].index = p.states[i].control;
+		centrino_model[cpu]->op_points[i].frequency = p.states[i].core_frequency * 1000;
+		dprintk("adding state %i with frequency %u and control value %04x\n", 
+			i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index);
+	}
+	centrino_model[cpu]->op_points[p.state_count].frequency = CPUFREQ_TABLE_END;
+
+	cur_freq = get_cur_freq(cpu);
+
+	for (i=0; i<p.state_count; i++) {
+		if (!p.states[i].core_frequency) {
+			dprintk("skipping state %u\n", i);
+			centrino_model[cpu]->op_points[i].frequency = CPUFREQ_ENTRY_INVALID;
+			continue;
+		}
+		
+		if (extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0) !=
+		    (centrino_model[cpu]->op_points[i].frequency)) {
+			dprintk("Invalid encoded frequency (%u vs. %u)\n",
+				extract_clock(centrino_model[cpu]->op_points[i].index, cpu, 0),
+				centrino_model[cpu]->op_points[i].frequency);
+			result = -EINVAL;
+			goto err_kfree_all;
+		}
+
+		if (cur_freq == centrino_model[cpu]->op_points[i].frequency)
+			p.state = i;
+	}
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	return 0;
+
+ err_kfree_all:
+	kfree(centrino_model[cpu]->op_points);
+ err_kfree:
+	kfree(centrino_model[cpu]);
+ err_unreg:
+	acpi_processor_unregister_performance(&p, cpu);
+	dprintk(KERN_INFO PFX "invalid ACPI data\n");
+	return (result);
+}
+#else
+static inline int centrino_cpu_init_acpi(struct cpufreq_policy *policy) { return -ENODEV; }
+#endif
+
+static int centrino_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu];
+	unsigned freq;
+	unsigned l, h;
+	int ret;
+	int i;
+
+	/* Only Intel makes Enhanced Speedstep-capable CPUs */
+	if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST))
+		return -ENODEV;
+
+	for (i = 0; i < N_IDS; i++)
+		if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
+			break;
+
+	if (i != N_IDS)
+		centrino_cpu[policy->cpu] = &cpu_ids[i];
+
+	if (is_const_loops_cpu(policy->cpu)) {
+		centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
+	}
+
+	if (centrino_cpu_init_acpi(policy)) {
+		if (policy->cpu != 0)
+			return -ENODEV;
+
+		if (!centrino_cpu[policy->cpu]) {
+			dprintk(KERN_INFO PFX "found unsupported CPU with "
+			"Enhanced SpeedStep: send /proc/cpuinfo to "
+			MAINTAINER "\n");
+			return -ENODEV;
+		}
+
+		if (centrino_cpu_init_table(policy)) {
+			return -ENODEV;
+		}
+	}
+
+	/* Check to see if Enhanced SpeedStep is enabled, and try to
+	   enable it if not. */
+	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+	if (!(l & (1<<16))) {
+		l |= (1<<16);
+		dprintk("trying to enable Enhanced SpeedStep (%x)\n", l);
+		wrmsr(MSR_IA32_MISC_ENABLE, l, h);
+
+		/* check to see if it stuck */
+		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+		if (!(l & (1<<16))) {
+			printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n");
+			return -ENODEV;
+		}
+	}
+
+	freq = get_cur_freq(policy->cpu);
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
+	policy->cur = freq;
+
+	dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points);
+	if (ret)
+		return (ret);
+
+	cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu);
+
+	return 0;
+}
+
+static int centrino_cpu_exit(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+
+	if (!centrino_model[cpu])
+		return -ENODEV;
+
+	cpufreq_frequency_table_put_attr(cpu);
+
+#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
+	if (!centrino_model[cpu]->model_name) {
+		dprintk("unregistering and freeing ACPI data\n");
+		acpi_processor_unregister_performance(&p, cpu);
+		kfree(centrino_model[cpu]->op_points);
+		kfree(centrino_model[cpu]);
+	}
+#endif
+
+	centrino_model[cpu] = NULL;
+
+	return 0;
+}
+
+/**
+ * centrino_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within this model's frequency range at least one
+ * border included.
+ */
+static int centrino_verify (struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points);
+}
+
+/**
+ * centrino_setpolicy - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int centrino_target (struct cpufreq_policy *policy,
+			    unsigned int target_freq,
+			    unsigned int relation)
+{
+	unsigned int    newstate = 0;
+	unsigned int	msr, oldmsr, h, cpu = policy->cpu;
+	struct cpufreq_freqs	freqs;
+	cpumask_t		saved_mask;
+	int			retval;
+
+	if (centrino_model[cpu] == NULL)
+		return -ENODEV;
+
+	/*
+	 * Support for SMP systems.
+	 * Make sure we are running on the CPU that wants to change frequency
+	 */
+	saved_mask = current->cpus_allowed;
+	set_cpus_allowed(current, policy->cpus);
+	if (!cpu_isset(smp_processor_id(), policy->cpus)) {
+		dprintk("couldn't limit to CPUs in this domain\n");
+		return(-EAGAIN);
+	}
+
+	if (cpufreq_frequency_table_target(policy, centrino_model[cpu]->op_points, target_freq,
+					   relation, &newstate)) {
+		retval = -EINVAL;
+		goto migrate_end;
+	}
+
+	msr = centrino_model[cpu]->op_points[newstate].index;
+	rdmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+
+	if (msr == (oldmsr & 0xffff)) {
+		retval = 0;
+		dprintk("no change needed - msr was and needs to be %x\n", oldmsr);
+		goto migrate_end;
+	}
+
+	freqs.cpu = cpu;
+	freqs.old = extract_clock(oldmsr, cpu, 0);
+	freqs.new = extract_clock(msr, cpu, 0);
+
+	dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
+		target_freq, freqs.old, freqs.new, msr);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* all but 16 LSB are "reserved", so treat them with
+	   care */
+	oldmsr &= ~0xffff;
+	msr &= 0xffff;
+	oldmsr |= msr;
+
+	wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	retval = 0;
+migrate_end:
+	set_cpus_allowed(current, saved_mask);
+	return (retval);
+}
+
+static struct freq_attr* centrino_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver centrino_driver = {
+	.name		= "centrino", /* should be speedstep-centrino,
+					 but there's a 16 char limit */
+	.init		= centrino_cpu_init,
+	.exit		= centrino_cpu_exit,
+	.verify		= centrino_verify,
+	.target		= centrino_target,
+	.get		= get_cur_freq,
+	.attr           = centrino_attr,
+	.owner		= THIS_MODULE,
+};
+
+
+/**
+ * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
+ *
+ * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
+ * unsupported devices, -ENOENT if there's no voltage table for this
+ * particular CPU model, -EINVAL on problems during initiatization,
+ * and zero on success.
+ *
+ * This is quite picky.  Not only does the CPU have to advertise the
+ * "est" flag in the cpuid capability flags, we look for a specific
+ * CPU model and stepping, and we need to have the exact model name in
+ * our voltage tables.  That is, be paranoid about not releasing
+ * someone's valuable magic smoke.
+ */
+static int __init centrino_init(void)
+{
+	struct cpuinfo_x86 *cpu = cpu_data;
+
+	if (!cpu_has(cpu, X86_FEATURE_EST))
+		return -ENODEV;
+
+	return cpufreq_register_driver(&centrino_driver);
+}
+
+static void __exit centrino_exit(void)
+{
+	cpufreq_unregister_driver(&centrino_driver);
+}
+
+MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
+MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
+MODULE_LICENSE ("GPL");
+
+late_initcall(centrino_init);
+module_exit(centrino_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-est-common.h b/arch/i386/kernel/cpu/cpufreq/speedstep-est-common.h
new file mode 100644
index 000000000000..5ce995c9d866
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-est-common.h
@@ -0,0 +1,25 @@
+/*
+ * Routines common for drivers handling Enhanced Speedstep Technology
+ *  Copyright (C) 2004 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2 -- see
+ *  COPYING for details.
+ */
+
+static inline int is_const_loops_cpu(unsigned int cpu)
+{
+	struct cpuinfo_x86 	*c = cpu_data + cpu;
+
+	if (c->x86_vendor != X86_VENDOR_INTEL || !cpu_has(c, X86_FEATURE_EST))
+		return 0;
+
+	/*
+	 * on P-4s, the TSC runs with constant frequency independent of cpu freq
+	 * when we use EST
+	 */
+	if (c->x86 == 0xf)
+		return 1;
+
+	return 0;
+}
+
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
new file mode 100644
index 000000000000..5b7d18a06afa
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c
@@ -0,0 +1,424 @@
+/*
+ * (C) 2001  Dave Jones, Arjan van de ven.
+ * (C) 2002 - 2003  Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *  Based upon reverse engineered information, and on Intel documentation
+ *  for chipsets ICH2-M and ICH3-M.
+ *
+ *  Many thanks to Ducrot Bruno for finding and fixing the last
+ *  "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler
+ *  for extensive testing.
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+/*********************************************************************
+ *                        SPEEDSTEP - DEFINITIONS                    *
+ *********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include "speedstep-lib.h"
+
+
+/* speedstep_chipset:
+ *   It is necessary to know which chipset is used. As accesses to
+ * this device occur at various places in this module, we need a
+ * static struct pci_dev * pointing to that device.
+ */
+static struct pci_dev *speedstep_chipset_dev;
+
+
+/* speedstep_processor
+ */
+static unsigned int speedstep_processor = 0;
+
+
+/*
+ *   There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+	{SPEEDSTEP_HIGH,	0},
+	{SPEEDSTEP_LOW,		0},
+	{0,			CPUFREQ_TABLE_END},
+};
+
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg)
+
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ *   Tries to change the SpeedStep state.
+ */
+static void speedstep_set_state (unsigned int state)
+{
+	u32 pmbase;
+	u8 pm2_blk;
+	u8 value;
+	unsigned long flags;
+
+	if (!speedstep_chipset_dev || (state > 0x1))
+		return;
+
+	/* get PMBASE */
+	pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
+	if (!(pmbase & 0x01)) {
+		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+		return;
+	}
+
+	pmbase &= 0xFFFFFFFE;
+	if (!pmbase) {
+		printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+		return;
+	}
+
+	/* Disable IRQs */
+	local_irq_save(flags);
+
+	/* read state */
+	value = inb(pmbase + 0x50);
+
+	dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+	/* write new state */
+	value &= 0xFE;
+	value |= state;
+
+	dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase);
+
+	/* Disable bus master arbitration */
+	pm2_blk = inb(pmbase + 0x20);
+	pm2_blk |= 0x01;
+	outb(pm2_blk, (pmbase + 0x20));
+
+	/* Actual transition */
+	outb(value, (pmbase + 0x50));
+
+	/* Restore bus master arbitration */
+	pm2_blk &= 0xfe;
+	outb(pm2_blk, (pmbase + 0x20));
+
+	/* check if transition was successful */
+	value = inb(pmbase + 0x50);
+
+	/* Enable IRQs */
+	local_irq_restore(flags);
+
+	dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
+
+	if (state == (value & 0x1)) {
+		dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000));
+	} else {
+		printk (KERN_ERR "cpufreq: change failed - I/O error\n");
+	}
+
+	return;
+}
+
+
+/**
+ * speedstep_activate - activate SpeedStep control in the chipset
+ *
+ *   Tries to activate the SpeedStep status and control registers.
+ * Returns -EINVAL on an unsupported chipset, and zero on success.
+ */
+static int speedstep_activate (void)
+{
+	u16 value = 0;
+
+	if (!speedstep_chipset_dev)
+		return -EINVAL;
+
+	pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value);
+	if (!(value & 0x08)) {
+		value |= 0x08;
+		dprintk("activating SpeedStep (TM) registers\n");
+		pci_write_config_word(speedstep_chipset_dev, 0x00A0, value);
+	}
+
+	return 0;
+}
+
+
+/**
+ * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic
+ *
+ *   Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to
+ * the LPC bridge / PM module which contains all power-management
+ * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
+ * chipset, or zero on failure.
+ */
+static unsigned int speedstep_detect_chipset (void)
+{
+	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82801DB_12,
+			      PCI_ANY_ID,
+			      PCI_ANY_ID,
+			      NULL);
+	if (speedstep_chipset_dev)
+		return 4; /* 4-M */
+
+	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82801CA_12,
+			      PCI_ANY_ID,
+			      PCI_ANY_ID,
+			      NULL);
+	if (speedstep_chipset_dev)
+		return 3; /* 3-M */
+
+
+	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82801BA_10,
+			      PCI_ANY_ID,
+			      PCI_ANY_ID,
+			      NULL);
+	if (speedstep_chipset_dev) {
+		/* speedstep.c causes lockups on Dell Inspirons 8000 and
+		 * 8100 which use a pretty old revision of the 82815
+		 * host brige. Abort on these systems.
+		 */
+		static struct pci_dev *hostbridge;
+		u8 rev = 0;
+
+		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			      PCI_DEVICE_ID_INTEL_82815_MC,
+			      PCI_ANY_ID,
+			      PCI_ANY_ID,
+			      NULL);
+
+		if (!hostbridge)
+			return 2; /* 2-M */
+
+		pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev);
+		if (rev < 5) {
+			dprintk("hostbridge does not support speedstep\n");
+			speedstep_chipset_dev = NULL;
+			pci_dev_put(hostbridge);
+			return 0;
+		}
+
+		pci_dev_put(hostbridge);
+		return 2; /* 2-M */
+	}
+
+	return 0;
+}
+
+static unsigned int _speedstep_get(cpumask_t cpus)
+{
+	unsigned int speed;
+	cpumask_t cpus_allowed;
+
+	cpus_allowed = current->cpus_allowed;
+	set_cpus_allowed(current, cpus);
+	speed = speedstep_get_processor_frequency(speedstep_processor);
+	set_cpus_allowed(current, cpus_allowed);
+	dprintk("detected %u kHz as current frequency\n", speed);
+	return speed;
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+	return _speedstep_get(cpumask_of_cpu(cpu));
+}
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: the target frequency
+ * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ *
+ * Sets a new CPUFreq policy.
+ */
+static int speedstep_target (struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	unsigned int newstate = 0;
+	struct cpufreq_freqs freqs;
+	cpumask_t cpus_allowed;
+	int i;
+
+	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+		return -EINVAL;
+
+	freqs.old = _speedstep_get(policy->cpus);
+	freqs.new = speedstep_freqs[newstate].frequency;
+	freqs.cpu = policy->cpu;
+
+	dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new);
+
+	/* no transition necessary */
+	if (freqs.old == freqs.new)
+		return 0;
+
+	cpus_allowed = current->cpus_allowed;
+
+	for_each_cpu_mask(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
+
+	/* switch to physical CPU where state is to be changed */
+	set_cpus_allowed(current, policy->cpus);
+
+	speedstep_set_state(newstate);
+
+	/* allow to be run on all CPUs */
+	set_cpus_allowed(current, cpus_allowed);
+
+	for_each_cpu_mask(i, policy->cpus) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
+
+	return 0;
+}
+
+
+/**
+ * speedstep_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within speedstep_low_freq and speedstep_high_freq, with
+ * at least one border included.
+ */
+static int speedstep_verify (struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
+}
+
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+	int result = 0;
+	unsigned int speed;
+	cpumask_t cpus_allowed;
+
+	/* only run on CPU to be set, or on its sibling */
+#ifdef CONFIG_SMP
+	policy->cpus = cpu_sibling_map[policy->cpu];
+#endif
+
+	cpus_allowed = current->cpus_allowed;
+	set_cpus_allowed(current, policy->cpus);
+
+	/* detect low and high frequency */
+	result = speedstep_get_freqs(speedstep_processor,
+				     &speedstep_freqs[SPEEDSTEP_LOW].frequency,
+				     &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+				     &speedstep_set_state);
+	set_cpus_allowed(current, cpus_allowed);
+	if (result)
+		return result;
+
+	/* get current speed setting */
+	speed = _speedstep_get(policy->cpus);
+	if (!speed)
+		return -EIO;
+
+	dprintk("currently at %s speed setting - %i MHz\n",
+		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+		(speed / 1000));
+
+	/* cpuinfo and default policy values */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = speed;
+
+	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
+	if (result)
+		return (result);
+
+        cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+
+	return 0;
+}
+
+
+static int speedstep_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr* speedstep_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+
+static struct cpufreq_driver speedstep_driver = {
+	.name	= "speedstep-ich",
+	.verify	= speedstep_verify,
+	.target	= speedstep_target,
+	.init	= speedstep_cpu_init,
+	.exit	= speedstep_cpu_exit,
+	.get	= speedstep_get,
+	.owner	= THIS_MODULE,
+	.attr	= speedstep_attr,
+};
+
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * devices, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+	/* detect processor */
+	speedstep_processor = speedstep_detect_processor();
+	if (!speedstep_processor) {
+		dprintk("Intel(R) SpeedStep(TM) capable processor not found\n");
+		return -ENODEV;
+	}
+
+	/* detect chipset */
+	if (!speedstep_detect_chipset()) {
+		dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n");
+		return -ENODEV;
+	}
+
+	/* activate speedstep support */
+	if (speedstep_activate()) {
+		pci_dev_put(speedstep_chipset_dev);
+		return -EINVAL;
+	}
+
+	return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ *   Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+	pci_dev_put(speedstep_chipset_dev);
+	cpufreq_unregister_driver(&speedstep_driver);
+}
+
+
+MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
+MODULE_LICENSE ("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
new file mode 100644
index 000000000000..8ba430a9c3a2
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
@@ -0,0 +1,385 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include "speedstep-lib.h"
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg)
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+static int relaxed_check = 0;
+#else
+#define relaxed_check 0
+#endif
+
+/*********************************************************************
+ *                   GET PROCESSOR CORE SPEED IN KHZ                 *
+ *********************************************************************/
+
+static unsigned int pentium3_get_frequency (unsigned int processor)
+{
+        /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
+	struct {
+		unsigned int ratio;	/* Frequency Multiplier (x10) */
+		u8 bitmap;	        /* power on configuration bits
+					   [27, 25:22] (in MSR 0x2a) */
+	} msr_decode_mult [] = {
+		{ 30, 0x01 },
+		{ 35, 0x05 },
+		{ 40, 0x02 },
+		{ 45, 0x06 },
+		{ 50, 0x00 },
+		{ 55, 0x04 },
+		{ 60, 0x0b },
+		{ 65, 0x0f },
+		{ 70, 0x09 },
+		{ 75, 0x0d },
+		{ 80, 0x0a },
+		{ 85, 0x26 },
+		{ 90, 0x20 },
+		{ 100, 0x2b },
+		{ 0, 0xff }     /* error or unknown value */
+	};
+
+	/* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
+	struct {
+		unsigned int value;     /* Front Side Bus speed in MHz */
+		u8 bitmap;              /* power on configuration bits [18: 19]
+					   (in MSR 0x2a) */
+	} msr_decode_fsb [] = {
+		{  66, 0x0 },
+		{ 100, 0x2 },
+		{ 133, 0x1 },
+		{   0, 0xff}
+	};
+
+	u32     msr_lo, msr_tmp;
+	int     i = 0, j = 0;
+
+	/* read MSR 0x2a - we only need the low 32 bits */
+	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+	dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+	msr_tmp = msr_lo;
+
+	/* decode the FSB */
+	msr_tmp &= 0x00c0000;
+	msr_tmp >>= 18;
+	while (msr_tmp != msr_decode_fsb[i].bitmap) {
+		if (msr_decode_fsb[i].bitmap == 0xff)
+			return 0;
+		i++;
+	}
+
+	/* decode the multiplier */
+	if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) {
+		dprintk("workaround for early PIIIs\n");
+		msr_lo &= 0x03c00000;
+	} else
+		msr_lo &= 0x0bc00000;
+	msr_lo >>= 22;
+	while (msr_lo != msr_decode_mult[j].bitmap) {
+		if (msr_decode_mult[j].bitmap == 0xff)
+			return 0;
+		j++;
+	}
+
+	dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
+
+	return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100);
+}
+
+
+static unsigned int pentiumM_get_frequency(void)
+{
+	u32     msr_lo, msr_tmp;
+
+	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+	dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+
+	/* see table B-2 of 24547212.pdf */
+	if (msr_lo & 0x00040000) {
+		printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp);
+		return 0;
+	}
+
+	msr_tmp = (msr_lo >> 22) & 0x1f;
+	dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000));
+
+	return (msr_tmp * 100 * 1000);
+}
+
+
+static unsigned int pentium4_get_frequency(void)
+{
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+	u32 msr_lo, msr_hi, mult;
+	unsigned int fsb = 0;
+
+	rdmsr(0x2c, msr_lo, msr_hi);
+
+	dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
+
+	/* decode the FSB: see IA-32 Intel (C) Architecture Software 
+	 * Developer's Manual, Volume 3: System Prgramming Guide,
+	 * revision #12 in Table B-1: MSRs in the Pentium 4 and
+	 * Intel Xeon Processors, on page B-4 and B-5.
+	 */
+	if (c->x86_model < 2)
+		fsb = 100 * 1000;
+	else {
+		u8 fsb_code = (msr_lo >> 16) & 0x7;
+		switch (fsb_code) {
+		case 0:
+			fsb = 100 * 1000;
+			break;
+		case 1:
+			fsb = 13333 * 10;
+			break;
+		case 2:
+			fsb = 200 * 1000;
+			break;
+		}
+	}
+
+	if (!fsb)
+		printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n");
+
+	/* Multiplier. */
+	if (c->x86_model < 2)
+		mult = msr_lo >> 27;
+	else
+		mult = msr_lo >> 24;
+
+	dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult));
+
+	return (fsb * mult);
+}
+
+ 
+unsigned int speedstep_get_processor_frequency(unsigned int processor)
+{
+	switch (processor) {
+	case SPEEDSTEP_PROCESSOR_PM:
+		return pentiumM_get_frequency();
+	case SPEEDSTEP_PROCESSOR_P4D:
+	case SPEEDSTEP_PROCESSOR_P4M:
+		return pentium4_get_frequency();
+	case SPEEDSTEP_PROCESSOR_PIII_T:
+	case SPEEDSTEP_PROCESSOR_PIII_C:
+	case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+		return pentium3_get_frequency(processor);
+	default:
+		return 0;
+	};
+	return 0;
+}
+EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency);
+
+
+/*********************************************************************
+ *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
+ *********************************************************************/
+
+unsigned int speedstep_detect_processor (void)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+	u32			ebx, msr_lo, msr_hi;
+
+	dprintk("x86: %x, model: %x\n", c->x86, c->x86_model);
+
+	if ((c->x86_vendor != X86_VENDOR_INTEL) || 
+	    ((c->x86 != 6) && (c->x86 != 0xF)))
+		return 0;
+
+	if (c->x86 == 0xF) {
+		/* Intel Mobile Pentium 4-M
+		 * or Intel Mobile Pentium 4 with 533 MHz FSB */
+		if (c->x86_model != 2)
+			return 0;
+
+		ebx = cpuid_ebx(0x00000001);
+		ebx &= 0x000000FF;
+
+		dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
+
+		switch (c->x86_mask) {
+		case 4: 
+			/*
+			 * B-stepping [M-P4-M] 
+			 * sample has ebx = 0x0f, production has 0x0e.
+			 */
+			if ((ebx == 0x0e) || (ebx == 0x0f))
+				return SPEEDSTEP_PROCESSOR_P4M;
+			break;
+		case 7: 
+			/*
+			 * C-stepping [M-P4-M]
+			 * needs to have ebx=0x0e, else it's a celeron:
+			 * cf. 25130917.pdf / page 7, footnote 5 even
+			 * though 25072120.pdf / page 7 doesn't say
+			 * samples are only of B-stepping...
+			 */
+			if (ebx == 0x0e)
+				return SPEEDSTEP_PROCESSOR_P4M;
+			break;
+		case 9:
+			/*
+			 * D-stepping [M-P4-M or M-P4/533]
+			 *
+			 * this is totally strange: CPUID 0x0F29 is
+			 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
+			 * The latter need to be sorted out as they don't
+			 * support speedstep.
+			 * Celerons with CPUID 0x0F29 may have either
+			 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
+			 * specific.
+			 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
+			 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
+			 * also, M-P4M HTs have ebx=0x8, too
+			 * For now, they are distinguished by the model_id string
+			 */
+		        if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) 
+				return SPEEDSTEP_PROCESSOR_P4M;
+			break;
+		default:
+			break;
+		}
+		return 0;
+	}
+
+	switch (c->x86_model) {
+	case 0x0B: /* Intel PIII [Tualatin] */
+		/* cpuid_ebx(1) is 0x04 for desktop PIII, 
+		                   0x06 for mobile PIII-M */
+		ebx = cpuid_ebx(0x00000001);
+		dprintk("ebx is %x\n", ebx);
+
+		ebx &= 0x000000FF;
+
+		if (ebx != 0x06)
+			return 0;
+
+		/* So far all PIII-M processors support SpeedStep. See
+		 * Intel's 24540640.pdf of June 2003 
+		 */
+
+		return SPEEDSTEP_PROCESSOR_PIII_T;
+
+	case 0x08: /* Intel PIII [Coppermine] */
+
+		/* all mobile PIII Coppermines have FSB 100 MHz
+		 * ==> sort out a few desktop PIIIs. */
+		rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
+		dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi);
+		msr_lo &= 0x00c0000;
+		if (msr_lo != 0x0080000)
+			return 0;
+
+		/*
+		 * If the processor is a mobile version,
+		 * platform ID has bit 50 set
+		 * it has SpeedStep technology if either
+		 * bit 56 or 57 is set
+		 */
+		rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
+		dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi);
+		if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
+			if (c->x86_mask == 0x01) {
+				dprintk("early PIII version\n");
+				return SPEEDSTEP_PROCESSOR_PIII_C_EARLY;
+			} else
+				return SPEEDSTEP_PROCESSOR_PIII_C;
+		}
+
+	default:
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(speedstep_detect_processor);
+
+
+/*********************************************************************
+ *                     DETECT SPEEDSTEP SPEEDS                       *
+ *********************************************************************/
+
+unsigned int speedstep_get_freqs(unsigned int processor,
+				  unsigned int *low_speed,
+				  unsigned int *high_speed,
+				  void (*set_state) (unsigned int state))
+{
+	unsigned int prev_speed;
+	unsigned int ret = 0;
+	unsigned long flags;
+
+	if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
+		return -EINVAL;
+
+	dprintk("trying to determine both speeds\n");
+
+	/* get current speed */
+	prev_speed = speedstep_get_processor_frequency(processor);
+	if (!prev_speed)
+		return -EIO;
+
+	dprintk("previous seped is %u\n", prev_speed);
+	
+	local_irq_save(flags);
+
+	/* switch to low state */
+	set_state(SPEEDSTEP_LOW);
+	*low_speed = speedstep_get_processor_frequency(processor);
+	if (!*low_speed) {
+		ret = -EIO;
+		goto out;
+	}
+
+	dprintk("low seped is %u\n", *low_speed);
+
+	/* switch to high state */
+	set_state(SPEEDSTEP_HIGH);
+	*high_speed = speedstep_get_processor_frequency(processor);
+	if (!*high_speed) {
+		ret = -EIO;
+		goto out;
+	}
+
+	dprintk("high seped is %u\n", *high_speed);
+
+	if (*low_speed == *high_speed) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* switch to previous state, if necessary */
+	if (*high_speed != prev_speed)
+		set_state(SPEEDSTEP_LOW);
+
+ out:
+	local_irq_restore(flags);
+	return (ret);
+}
+EXPORT_SYMBOL_GPL(speedstep_get_freqs);
+
+#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
+module_param(relaxed_check, int, 0444);
+MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability.");
+#endif
+
+MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
+MODULE_LICENSE ("GPL");
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
new file mode 100644
index 000000000000..261a2c9b7f6b
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h
@@ -0,0 +1,47 @@
+/*
+ * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Library for common functions for Intel SpeedStep v.1 and v.2 support
+ *
+ *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+
+
+/* processors */
+
+#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY	0x00000001  /* Coppermine core */
+#define SPEEDSTEP_PROCESSOR_PIII_C		0x00000002  /* Coppermine core */
+#define SPEEDSTEP_PROCESSOR_PIII_T 		0x00000003  /* Tualatin core */
+#define SPEEDSTEP_PROCESSOR_P4M			0x00000004  /* P4-M  */
+
+/* the following processors are not speedstep-capable and are not auto-detected
+ * in speedstep_detect_processor(). However, their speed can be detected using
+ * the speedstep_get_processor_frequency() call. */
+#define SPEEDSTEP_PROCESSOR_PM			0xFFFFFF03  /* Pentium M  */
+#define SPEEDSTEP_PROCESSOR_P4D			0xFFFFFF04  /* desktop P4  */
+
+/* speedstep states -- only two of them */
+
+#define SPEEDSTEP_HIGH                  0x00000000
+#define SPEEDSTEP_LOW                   0x00000001
+
+
+/* detect a speedstep-capable processor */
+extern unsigned int speedstep_detect_processor (void);
+
+/* detect the current speed (in khz) of the processor */
+extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
+
+
+/* detect the low and high speeds of the processor. The callback 
+ * set_state"'s first argument is either SPEEDSTEP_HIGH or 
+ * SPEEDSTEP_LOW; the second argument is zero so that no 
+ * cpufreq_notify_transition calls are initiated.
+ */
+extern unsigned int speedstep_get_freqs(unsigned int processor,
+	  unsigned int *low_speed,
+	  unsigned int *high_speed,
+	  void (*set_state) (unsigned int state));
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
new file mode 100644
index 000000000000..79440b3f087e
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -0,0 +1,424 @@
+/*
+ * Intel SpeedStep SMI driver.
+ *
+ * (C) 2003  Hiroshi Miura <miura@da-cha.org>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ */
+
+
+/*********************************************************************
+ *                        SPEEDSTEP - DEFINITIONS                    *
+ *********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h> 
+#include <linux/moduleparam.h> 
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <asm/ist.h>
+
+#include "speedstep-lib.h"
+
+/* speedstep system management interface port/command.
+ *
+ * These parameters are got from IST-SMI BIOS call.
+ * If user gives it, these are used.
+ * 
+ */
+static int		smi_port	= 0;
+static int		smi_cmd		= 0;
+static unsigned int	smi_sig		= 0;
+
+/* info about the processor */
+static unsigned int	speedstep_processor = 0;
+
+/* 
+ *   There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+	{SPEEDSTEP_HIGH, 	0},
+	{SPEEDSTEP_LOW,		0},
+	{0,			CPUFREQ_TABLE_END},
+};
+
+#define GET_SPEEDSTEP_OWNER 0
+#define GET_SPEEDSTEP_STATE 1
+#define SET_SPEEDSTEP_STATE 2
+#define GET_SPEEDSTEP_FREQS 4
+
+/* how often shall the SMI call be tried if it failed, e.g. because
+ * of DMA activity going on? */
+#define SMI_TRIES 5
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg)
+
+/**
+ * speedstep_smi_ownership
+ */
+static int speedstep_smi_ownership (void)
+{
+	u32 command, result, magic;
+	u32 function = GET_SPEEDSTEP_OWNER;
+	unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+	magic = virt_to_phys(magic_data);
+
+	dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
+
+	__asm__ __volatile__(
+		"out %%al, (%%dx)\n"
+		: "=D" (result)
+		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic)
+	);
+
+	dprintk("result is %x\n", result);
+
+	return result;
+}
+
+/**
+ * speedstep_smi_get_freqs - get SpeedStep preferred & current freq.
+ * @low: the low frequency value is placed here
+ * @high: the high frequency value is placed here
+ *
+ * Only available on later SpeedStep-enabled systems, returns false results or
+ * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
+ * shows that the latter occurs if !(ist_info.event & 0xFFFF).
+ */
+static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
+{
+	u32 command, result = 0, edi, high_mhz, low_mhz;
+	u32 state=0;
+	u32 function = GET_SPEEDSTEP_FREQS;
+
+	if (!(ist_info.event & 0xFFFF)) {
+		dprintk("bug #1422 -- can't read freqs from BIOS\n", result);
+		return -ENODEV;
+	}
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+	dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
+
+	__asm__ __volatile__("movl $0, %%edi\n"
+		"out %%al, (%%dx)\n"
+		: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
+		: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+	);
+
+	dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
+
+	/* abort if results are obviously incorrect... */
+	if ((high_mhz + low_mhz) < 600)
+		return -EINVAL;
+
+	*high = high_mhz * 1000;
+	*low  = low_mhz  * 1000;
+
+	return result;
+} 
+
+/**
+ * speedstep_get_state - set the SpeedStep state
+ * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ */
+static int speedstep_get_state (void)
+{
+	u32 function=GET_SPEEDSTEP_STATE;
+	u32 result, state, edi, command;
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+	dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
+
+	__asm__ __volatile__("movl $0, %%edi\n"
+		"out %%al, (%%dx)\n"
+		: "=a" (result), "=b" (state), "=D" (edi)
+		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
+	);
+
+	dprintk("state is %x, result is %x\n", state, result);
+
+	return (state & 1);
+}
+
+
+/**
+ * speedstep_set_state - set the SpeedStep state
+ * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
+ *
+ */
+static void speedstep_set_state (unsigned int state)
+{
+	unsigned int result = 0, command, new_state;
+	unsigned long flags;
+	unsigned int function=SET_SPEEDSTEP_STATE;
+	unsigned int retry = 0;
+
+	if (state > 0x1)
+		return;
+
+	/* Disable IRQs */
+	local_irq_save(flags);
+
+	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
+
+	dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port);
+
+	do {
+		if (retry) {
+			dprintk("retry %u, previous result %u, waiting...\n", retry, result);
+			mdelay(retry * 50);
+		}
+		retry++;
+		__asm__ __volatile__(
+			"movl $0, %%edi\n"
+			"out %%al, (%%dx)\n"
+			: "=b" (new_state), "=D" (result)
+			: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+			);
+	} while ((new_state != state) && (retry <= SMI_TRIES));
+
+	/* enable IRQs */
+	local_irq_restore(flags);
+
+	if (new_state == state) {
+		dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
+	} else {
+		printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
+	}
+
+	return;
+}
+
+
+/**
+ * speedstep_target - set a new CPUFreq policy
+ * @policy: new policy
+ * @target_freq: new freq
+ * @relation: 
+ *
+ * Sets a new CPUFreq policy/freq.
+ */
+static int speedstep_target (struct cpufreq_policy *policy,
+			unsigned int target_freq, unsigned int relation)
+{
+	unsigned int newstate = 0;
+	struct cpufreq_freqs freqs;
+
+	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+		return -EINVAL;
+
+	freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
+	freqs.new = speedstep_freqs[newstate].frequency;
+	freqs.cpu = 0; /* speedstep.c is UP only driver */
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	speedstep_set_state(newstate);
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+
+/**
+ * speedstep_verify - verifies a new CPUFreq policy
+ * @policy: new policy
+ *
+ * Limit must be within speedstep_low_freq and speedstep_high_freq, with
+ * at least one border included.
+ */
+static int speedstep_verify (struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
+}
+
+
+static int speedstep_cpu_init(struct cpufreq_policy *policy)
+{
+	int result;
+	unsigned int speed,state;
+
+	/* capability check */
+	if (policy->cpu != 0)
+		return -ENODEV;
+
+	result = speedstep_smi_ownership();
+	if (result) {
+		dprintk("fails in aquiring ownership of a SMI interface.\n");
+		return -EINVAL;
+	}
+
+	/* detect low and high frequency */
+	result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency,
+				&speedstep_freqs[SPEEDSTEP_HIGH].frequency);
+	if (result) {
+		/* fall back to speedstep_lib.c dection mechanism: try both states out */
+		dprintk("could not detect low and high frequencies by SMI call.\n");
+		result = speedstep_get_freqs(speedstep_processor,
+				&speedstep_freqs[SPEEDSTEP_LOW].frequency,
+				&speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+				&speedstep_set_state);
+
+		if (result) {
+			dprintk("could not detect two different speeds -- aborting.\n");
+			return result;
+		} else
+			dprintk("workaround worked.\n");
+	}
+
+	/* get current speed setting */
+	state = speedstep_get_state();
+	speed = speedstep_freqs[state].frequency;
+
+	dprintk("currently at %s speed setting - %i MHz\n", 
+		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+		(speed / 1000));
+
+	/* cpuinfo and default policy values */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cur = speed;
+
+	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
+	if (result)
+		return (result);
+
+        cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+
+	return 0;
+}
+
+static int speedstep_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static unsigned int speedstep_get(unsigned int cpu)
+{
+	if (cpu)
+		return -ENODEV;
+	return speedstep_get_processor_frequency(speedstep_processor);
+}
+
+
+static int speedstep_resume(struct cpufreq_policy *policy)
+{
+	int result = speedstep_smi_ownership();
+
+	if (result)
+		dprintk("fails in re-aquiring ownership of a SMI interface.\n");
+
+	return result;
+}
+
+static struct freq_attr* speedstep_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver speedstep_driver = {
+	.name		= "speedstep-smi",
+	.verify 	= speedstep_verify,
+	.target 	= speedstep_target,
+	.init		= speedstep_cpu_init,
+	.exit		= speedstep_cpu_exit,
+	.get		= speedstep_get,
+	.resume		= speedstep_resume,
+	.owner		= THIS_MODULE,
+	.attr		= speedstep_attr,
+};
+
+/**
+ * speedstep_init - initializes the SpeedStep CPUFreq driver
+ *
+ *   Initializes the SpeedStep support. Returns -ENODEV on unsupported
+ * BIOS, -EINVAL on problems during initiatization, and zero on
+ * success.
+ */
+static int __init speedstep_init(void)
+{
+	speedstep_processor = speedstep_detect_processor();
+
+	switch (speedstep_processor) {
+	case SPEEDSTEP_PROCESSOR_PIII_T:
+	case SPEEDSTEP_PROCESSOR_PIII_C:
+	case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+		break;
+	default:
+		speedstep_processor = 0;
+	}
+
+	if (!speedstep_processor) {
+		dprintk ("No supported Intel CPU detected.\n");
+		return -ENODEV;
+	}
+
+	dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", 
+		ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
+
+
+	/* Error if no IST-SMI BIOS or no PARM 
+		 sig= 'ISGE' aka 'Intel Speedstep Gate E' */
+	if ((ist_info.signature !=  0x47534943) && ( 
+	    (smi_port == 0) || (smi_cmd == 0)))
+		return -ENODEV;
+
+	if (smi_sig == 1)
+		smi_sig = 0x47534943;
+	else
+		smi_sig = ist_info.signature;
+
+	/* setup smi_port from MODLULE_PARM or BIOS */
+	if ((smi_port > 0xff) || (smi_port < 0)) {
+		return -EINVAL;
+	} else if (smi_port == 0) {
+		smi_port = ist_info.command & 0xff;
+	}
+
+	if ((smi_cmd > 0xff) || (smi_cmd < 0)) {
+		return -EINVAL;
+	} else if (smi_cmd == 0) {
+		smi_cmd = (ist_info.command >> 16) & 0xff;
+	}
+
+	return cpufreq_register_driver(&speedstep_driver);
+}
+
+
+/**
+ * speedstep_exit - unregisters SpeedStep support
+ *
+ *   Unregisters SpeedStep support.
+ */
+static void __exit speedstep_exit(void)
+{
+	cpufreq_unregister_driver(&speedstep_driver);
+}
+
+module_param(smi_port,  int, 0444);
+module_param(smi_cmd,   int, 0444);
+module_param(smi_sig,  uint, 0444);
+
+MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2");
+MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82");
+MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface.");
+
+MODULE_AUTHOR ("Hiroshi Miura");
+MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface.");
+MODULE_LICENSE ("GPL");
+
+module_init(speedstep_init);
+module_exit(speedstep_exit);
diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
new file mode 100644
index 000000000000..ba4b01138c8f
--- /dev/null
+++ b/arch/i386/kernel/cpu/cyrix.c
@@ -0,0 +1,439 @@
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/timer.h>
+
+#include "cpu.h"
+
+/*
+ * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
+ */
+static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+	unsigned char ccr2, ccr3;
+	unsigned long flags;
+	
+	/* we test for DEVID by checking whether CCR3 is writable */
+	local_irq_save(flags);
+	ccr3 = getCx86(CX86_CCR3);
+	setCx86(CX86_CCR3, ccr3 ^ 0x80);
+	getCx86(0xc0);   /* dummy to change bus */
+
+	if (getCx86(CX86_CCR3) == ccr3) {       /* no DEVID regs. */
+		ccr2 = getCx86(CX86_CCR2);
+		setCx86(CX86_CCR2, ccr2 ^ 0x04);
+		getCx86(0xc0);  /* dummy */
+
+		if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */
+			*dir0 = 0xfd;
+		else {                          /* Cx486S A step */
+			setCx86(CX86_CCR2, ccr2);
+			*dir0 = 0xfe;
+		}
+	}
+	else {
+		setCx86(CX86_CCR3, ccr3);  /* restore CCR3 */
+
+		/* read DIR0 and DIR1 CPU registers */
+		*dir0 = getCx86(CX86_DIR0);
+		*dir1 = getCx86(CX86_DIR1);
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
+ * order to identify the Cyrix CPU model after we're out of setup.c
+ *
+ * Actually since bugs.h doesn't even reference this perhaps someone should
+ * fix the documentation ???
+ */
+static unsigned char Cx86_dir0_msb __initdata = 0;
+
+static char Cx86_model[][9] __initdata = {
+	"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
+	"M II ", "Unknown"
+};
+static char Cx486_name[][5] __initdata = {
+	"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
+	"SRx2", "DRx2"
+};
+static char Cx486S_name[][4] __initdata = {
+	"S", "S2", "Se", "S2e"
+};
+static char Cx486D_name[][4] __initdata = {
+	"DX", "DX2", "?", "?", "?", "DX4"
+};
+static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
+static char cyrix_model_mult1[] __initdata = "12??43";
+static char cyrix_model_mult2[] __initdata = "12233445";
+
+/*
+ * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
+ * BIOSes for compatibility with DOS games.  This makes the udelay loop
+ * work correctly, and improves performance.
+ *
+ * FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP
+ */
+
+extern void calibrate_delay(void) __init;
+
+static void __init check_cx686_slop(struct cpuinfo_x86 *c)
+{
+	unsigned long flags;
+	
+	if (Cx86_dir0_msb == 3) {
+		unsigned char ccr3, ccr5;
+
+		local_irq_save(flags);
+		ccr3 = getCx86(CX86_CCR3);
+		setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+		ccr5 = getCx86(CX86_CCR5);
+		if (ccr5 & 2)
+			setCx86(CX86_CCR5, ccr5 & 0xfd);  /* reset SLOP */
+		setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
+		local_irq_restore(flags);
+
+		if (ccr5 & 2) { /* possible wrong calibration done */
+			printk(KERN_INFO "Recalibrating delay loop with SLOP bit reset\n");
+			calibrate_delay();
+			c->loops_per_jiffy = loops_per_jiffy;
+		}
+	}
+}
+
+
+static void __init set_cx86_reorder(void)
+{
+	u8 ccr3;
+
+	printk(KERN_INFO "Enable Memory access reorder on Cyrix/NSC processor.\n");
+	ccr3 = getCx86(CX86_CCR3);
+	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+
+	/* Load/Store Serialize to mem access disable (=reorder it)  */
+	setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+	/* set load/store serialize from 1GB to 4GB */
+	ccr3 |= 0xe0;
+	setCx86(CX86_CCR3, ccr3);
+}
+
+static void __init set_cx86_memwb(void)
+{
+	u32 cr0;
+
+	printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
+
+	/* CCR2 bit 2: unlock NW bit */
+	setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+	/* set 'Not Write-through' */
+	cr0 = 0x20000000;
+	__asm__("movl %%cr0,%%eax\n\t"
+		"orl %0,%%eax\n\t"
+		"movl %%eax,%%cr0\n"
+		: : "r" (cr0)
+		:"ax");
+	/* CCR2 bit 2: lock NW bit and set WT1 */
+	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
+}
+
+static void __init set_cx86_inc(void)
+{
+	unsigned char ccr3;
+
+	printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
+
+	ccr3 = getCx86(CX86_CCR3);
+	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+	/* PCR1 -- Performance Control */
+	/* Incrementor on, whatever that is */
+	setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
+	/* PCR0 -- Performance Control */
+	/* Incrementor Margin 10 */
+	setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04); 
+	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
+}
+
+/*
+ *	Configure later MediaGX and/or Geode processor.
+ */
+
+static void __init geode_configure(void)
+{
+	unsigned long flags;
+	u8 ccr3, ccr4;
+	local_irq_save(flags);
+
+	/* Suspend on halt power saving and enable #SUSP pin */
+	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+
+	ccr3 = getCx86(CX86_CCR3);
+	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* Enable */
+	
+	ccr4 = getCx86(CX86_CCR4);
+	ccr4 |= 0x38;		/* FPU fast, DTE cache, Mem bypass */
+	
+	setCx86(CX86_CCR3, ccr3);
+	
+	set_cx86_memwb();
+	set_cx86_reorder();	
+	set_cx86_inc();
+	
+	local_irq_restore(flags);
+}
+
+
+#ifdef CONFIG_PCI
+static struct pci_device_id cyrix_55x0[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) },
+	{ },
+};
+#endif
+
+static void __init init_cyrix(struct cpuinfo_x86 *c)
+{
+	unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
+	char *buf = c->x86_model_id;
+	const char *p = NULL;
+
+	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+	clear_bit(0*32+31, c->x86_capability);
+
+	/* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
+	if ( test_bit(1*32+24, c->x86_capability) ) {
+		clear_bit(1*32+24, c->x86_capability);
+		set_bit(X86_FEATURE_CXMMX, c->x86_capability);
+	}
+
+	do_cyrix_devid(&dir0, &dir1);
+
+	check_cx686_slop(c);
+
+	Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
+	dir0_lsn = dir0 & 0xf;                /* model or clock multiplier */
+
+	/* common case step number/rev -- exceptions handled below */
+	c->x86_model = (dir1 >> 4) + 1;
+	c->x86_mask = dir1 & 0xf;
+
+	/* Now cook; the original recipe is by Channing Corn, from Cyrix.
+	 * We do the same thing for each generation: we work out
+	 * the model, multiplier and stepping.  Black magic included,
+	 * to make the silicon step/rev numbers match the printed ones.
+	 */
+	 
+	switch (dir0_msn) {
+		unsigned char tmp;
+
+	case 0: /* Cx486SLC/DLC/SRx/DRx */
+		p = Cx486_name[dir0_lsn & 7];
+		break;
+
+	case 1: /* Cx486S/DX/DX2/DX4 */
+		p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5]
+			: Cx486S_name[dir0_lsn & 3];
+		break;
+
+	case 2: /* 5x86 */
+		Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+		p = Cx86_cb+2;
+		break;
+
+	case 3: /* 6x86/6x86L */
+		Cx86_cb[1] = ' ';
+		Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
+		if (dir1 > 0x21) { /* 686L */
+			Cx86_cb[0] = 'L';
+			p = Cx86_cb;
+			(c->x86_model)++;
+		} else             /* 686 */
+			p = Cx86_cb+1;
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+		/* 6x86's contain this bug */
+		c->coma_bug = 1;
+		break;
+
+	case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
+#ifdef CONFIG_PCI
+		/* It isn't really a PCI quirk directly, but the cure is the
+		   same. The MediaGX has deep magic SMM stuff that handles the
+		   SB emulation. It thows away the fifo on disable_dma() which
+		   is wrong and ruins the audio. 
+
+		   Bug2: VSA1 has a wrap bug so that using maximum sized DMA 
+		   causes bad things. According to NatSemi VSA2 has another
+		   bug to do with 'hlt'. I've not seen any boards using VSA2
+		   and X doesn't seem to support it either so who cares 8).
+		   VSA1 we work around however.
+		*/
+
+		printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
+		isa_dma_bridge_buggy = 2;
+#endif		
+		c->x86_cache_size=16;	/* Yep 16K integrated cache thats it */
+ 
+		/*
+		 *  The 5510/5520 companion chips have a funky PIT.
+		 */  
+		if (pci_dev_present(cyrix_55x0))
+			pit_latch_buggy = 1;
+
+		/* GXm supports extended cpuid levels 'ala' AMD */
+		if (c->cpuid_level == 2) {
+			/* Enable cxMMX extensions (GX1 Datasheet 54) */
+			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+			
+			/* GXlv/GXm/GX1 */
+			if((dir1 >= 0x50 && dir1 <= 0x54) || dir1 >= 0x63)
+				geode_configure();
+			get_model_name(c);  /* get CPU marketing name */
+			return;
+		}
+		else {  /* MediaGX */
+			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
+			p = Cx86_cb+2;
+			c->x86_model = (dir1 & 0x20) ? 1 : 2;
+		}
+		break;
+
+        case 5: /* 6x86MX/M II */
+		if (dir1 > 7)
+		{
+			dir0_msn++;  /* M II */
+			/* Enable MMX extensions (App note 108) */
+			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+		}
+		else
+		{
+			c->coma_bug = 1;      /* 6x86MX, it has the bug. */
+		}
+		tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
+		Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
+		p = Cx86_cb+tmp;
+        	if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
+			(c->x86_model)++;
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+		break;
+
+	case 0xf:  /* Cyrix 486 without DEVID registers */
+		switch (dir0_lsn) {
+		case 0xd:  /* either a 486SLC or DLC w/o DEVID */
+			dir0_msn = 0;
+			p = Cx486_name[(c->hard_math) ? 1 : 0];
+			break;
+
+		case 0xe:  /* a 486S A step */
+			dir0_msn = 0;
+			p = Cx486S_name[0];
+			break;
+		}
+		break;
+
+	default:  /* unknown (shouldn't happen, we know everyone ;-) */
+		dir0_msn = 7;
+		break;
+	}
+	strcpy(buf, Cx86_model[dir0_msn & 7]);
+	if (p) strcat(buf, p);
+	return;
+}
+
+/*
+ * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
+ * by the fact that they preserve the flags across the division of 5/2.
+ * PII and PPro exhibit this behavior too, but they have cpuid available.
+ */
+ 
+/*
+ * Perform the Cyrix 5/2 test. A Cyrix won't change
+ * the flags, while other 486 chips will.
+ */
+static inline int test_cyrix_52div(void)
+{
+	unsigned int test;
+
+	__asm__ __volatile__(
+	     "sahf\n\t"		/* clear flags (%eax = 0x0005) */
+	     "div %b2\n\t"	/* divide 5 by 2 */
+	     "lahf"		/* store flags into %ah */
+	     : "=a" (test)
+	     : "0" (5), "q" (2)
+	     : "cc");
+
+	/* AH is 0x02 on Cyrix after the divide.. */
+	return (unsigned char) (test >> 8) == 0x02;
+}
+
+static void cyrix_identify(struct cpuinfo_x86 * c)
+{
+	/* Detect Cyrix with disabled CPUID */
+	if ( c->x86 == 4 && test_cyrix_52div() ) {
+		unsigned char dir0, dir1;
+		
+		strcpy(c->x86_vendor_id, "CyrixInstead");
+	        c->x86_vendor = X86_VENDOR_CYRIX;
+	        
+	        /* Actually enable cpuid on the older cyrix */
+	    
+	    	/* Retrieve CPU revisions */
+	    	
+		do_cyrix_devid(&dir0, &dir1);
+
+		dir0>>=4;		
+		
+		/* Check it is an affected model */
+		
+   	        if (dir0 == 5 || dir0 == 3)
+   	        {
+			unsigned char ccr3, ccr4;
+			unsigned long flags;
+			printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
+			local_irq_save(flags);
+			ccr3 = getCx86(CX86_CCR3);
+			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN  */
+			ccr4 = getCx86(CX86_CCR4);
+			setCx86(CX86_CCR4, ccr4 | 0x80);          /* enable cpuid  */
+			setCx86(CX86_CCR3, ccr3);                 /* disable MAPEN */
+			local_irq_restore(flags);
+		}
+	}
+	generic_identify(c);
+}
+
+static struct cpu_dev cyrix_cpu_dev __initdata = {
+	.c_vendor	= "Cyrix",
+	.c_ident 	= { "CyrixInstead" },
+	.c_init		= init_cyrix,
+	.c_identify	= cyrix_identify,
+};
+
+int __init cyrix_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_CYRIX] = &cyrix_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(cyrix_init_cpu);
+
+static struct cpu_dev nsc_cpu_dev __initdata = {
+	.c_vendor	= "NSC",
+	.c_ident 	= { "Geode by NSC" },
+	.c_init		= init_cyrix,
+	.c_identify	= generic_identify,
+};
+
+int __init nsc_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_NSC] = &nsc_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(nsc_init_cpu);
diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c
new file mode 100644
index 000000000000..b8d847b850dc
--- /dev/null
+++ b/arch/i386/kernel/cpu/intel.c
@@ -0,0 +1,248 @@
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+
+#include "cpu.h"
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+#endif
+
+extern int trap_init_f00f_bug(void);
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+/*
+ * Alignment at which movsl is preferred for bulk memory copies.
+ */
+struct movsl_mask movsl_mask;
+#endif
+
+void __init early_intel_workaround(struct cpuinfo_x86 *c)
+{
+	if (c->x86_vendor != X86_VENDOR_INTEL)
+		return;
+	/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
+	if (c->x86 == 15 && c->x86_cache_alignment == 64)
+		c->x86_cache_alignment = 128;
+}
+
+/*
+ *	Early probe support logic for ppro memory erratum #50
+ *
+ *	This is called before we do cpu ident work
+ */
+ 
+int __init ppro_with_ram_bug(void)
+{
+	/* Uses data from early_cpu_detect now */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+	    boot_cpu_data.x86 == 6 &&
+	    boot_cpu_data.x86_model == 1 &&
+	    boot_cpu_data.x86_mask < 8) {
+		printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
+		return 1;
+	}
+	return 0;
+}
+	
+
+/*
+ * P4 Xeon errata 037 workaround.
+ * Hardware prefetcher may cause stale data to be loaded into the cache.
+ */
+static void __init Intel_errata_workarounds(struct cpuinfo_x86 *c)
+{
+	unsigned long lo, hi;
+
+	if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
+		rdmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+		if ((lo & (1<<9)) == 0) {
+			printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
+			printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
+			lo |= (1<<9);	/* Disable hw prefetching */
+			wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+		}
+	}
+}
+
+
+static void __init init_intel(struct cpuinfo_x86 *c)
+{
+	unsigned int l2 = 0;
+	char *p = NULL;
+
+#ifdef CONFIG_X86_F00F_BUG
+	/*
+	 * All current models of Pentium and Pentium with MMX technology CPUs
+	 * have the F0 0F bug, which lets nonprivileged users lock up the system.
+	 * Note that the workaround only should be initialized once...
+	 */
+	c->f00f_bug = 0;
+	if ( c->x86 == 5 ) {
+		static int f00f_workaround_enabled = 0;
+
+		c->f00f_bug = 1;
+		if ( !f00f_workaround_enabled ) {
+			trap_init_f00f_bug();
+			printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
+			f00f_workaround_enabled = 1;
+		}
+	}
+#endif
+
+	select_idle_routine(c);
+	l2 = init_intel_cacheinfo(c);
+
+	/* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
+	if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
+		clear_bit(X86_FEATURE_SEP, c->x86_capability);
+
+	/* Names for the Pentium II/Celeron processors 
+	   detectable only by also checking the cache size.
+	   Dixon is NOT a Celeron. */
+	if (c->x86 == 6) {
+		switch (c->x86_model) {
+		case 5:
+			if (c->x86_mask == 0) {
+				if (l2 == 0)
+					p = "Celeron (Covington)";
+				else if (l2 == 256)
+					p = "Mobile Pentium II (Dixon)";
+			}
+			break;
+			
+		case 6:
+			if (l2 == 128)
+				p = "Celeron (Mendocino)";
+			else if (c->x86_mask == 0 || c->x86_mask == 5)
+				p = "Celeron-A";
+			break;
+			
+		case 8:
+			if (l2 == 128)
+				p = "Celeron (Coppermine)";
+			break;
+		}
+	}
+
+	if ( p )
+		strcpy(c->x86_model_id, p);
+	
+	detect_ht(c);
+
+	/* Work around errata */
+	Intel_errata_workarounds(c);
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+	/*
+	 * Set up the preferred alignment for movsl bulk memory moves
+	 */
+	switch (c->x86) {
+	case 4:		/* 486: untested */
+		break;
+	case 5:		/* Old Pentia: untested */
+		break;
+	case 6:		/* PII/PIII only like movsl with 8-byte alignment */
+		movsl_mask.mask = 7;
+		break;
+	case 15:	/* P4 is OK down to 8-byte alignment */
+		movsl_mask.mask = 7;
+		break;
+	}
+#endif
+
+	if (c->x86 == 15) 
+		set_bit(X86_FEATURE_P4, c->x86_capability);
+	if (c->x86 == 6) 
+		set_bit(X86_FEATURE_P3, c->x86_capability);
+}
+
+
+static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+{
+	/* Intel PIII Tualatin. This comes in two flavours.
+	 * One has 256kb of cache, the other 512. We have no way
+	 * to determine which, so we use a boottime override
+	 * for the 512kb model, and assume 256 otherwise.
+	 */
+	if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
+		size = 256;
+	return size;
+}
+
+static struct cpu_dev intel_cpu_dev __initdata = {
+	.c_vendor	= "Intel",
+	.c_ident 	= { "GenuineIntel" },
+	.c_models = {
+		{ .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = 
+		  { 
+			  [0] = "486 DX-25/33", 
+			  [1] = "486 DX-50", 
+			  [2] = "486 SX", 
+			  [3] = "486 DX/2", 
+			  [4] = "486 SL", 
+			  [5] = "486 SX/2", 
+			  [7] = "486 DX/2-WB", 
+			  [8] = "486 DX/4", 
+			  [9] = "486 DX/4-WB"
+		  }
+		},
+		{ .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
+		  { 
+			  [0] = "Pentium 60/66 A-step", 
+			  [1] = "Pentium 60/66", 
+			  [2] = "Pentium 75 - 200",
+			  [3] = "OverDrive PODP5V83", 
+			  [4] = "Pentium MMX",
+			  [7] = "Mobile Pentium 75 - 200", 
+			  [8] = "Mobile Pentium MMX"
+		  }
+		},
+		{ .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
+		  { 
+			  [0] = "Pentium Pro A-step",
+			  [1] = "Pentium Pro", 
+			  [3] = "Pentium II (Klamath)", 
+			  [4] = "Pentium II (Deschutes)", 
+			  [5] = "Pentium II (Deschutes)", 
+			  [6] = "Mobile Pentium II",
+			  [7] = "Pentium III (Katmai)", 
+			  [8] = "Pentium III (Coppermine)", 
+			  [10] = "Pentium III (Cascades)",
+			  [11] = "Pentium III (Tualatin)",
+		  }
+		},
+		{ .vendor = X86_VENDOR_INTEL, .family = 15, .model_names =
+		  {
+			  [0] = "Pentium 4 (Unknown)",
+			  [1] = "Pentium 4 (Willamette)",
+			  [2] = "Pentium 4 (Northwood)",
+			  [4] = "Pentium 4 (Foster)",
+			  [5] = "Pentium 4 (Foster)",
+		  }
+		},
+	},
+	.c_init		= init_intel,
+	.c_identify	= generic_identify,
+	.c_size_cache	= intel_size_cache,
+};
+
+__init int intel_cpu_init(void)
+{
+	cpu_devs[X86_VENDOR_INTEL] = &intel_cpu_dev;
+	return 0;
+}
+
+// arch_initcall(intel_cpu_init);
+
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
new file mode 100644
index 000000000000..aeb5b4ef8c8b
--- /dev/null
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -0,0 +1,598 @@
+/*
+ *      Routines to indentify caches on Intel CPU.
+ *
+ *      Changes:
+ *      Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/compiler.h>
+#include <linux/cpu.h>
+
+#include <asm/processor.h>
+#include <asm/smp.h>
+
+#define LVL_1_INST	1
+#define LVL_1_DATA	2
+#define LVL_2		3
+#define LVL_3		4
+#define LVL_TRACE	5
+
+struct _cache_table
+{
+	unsigned char descriptor;
+	char cache_type;
+	short size;
+};
+
+/* all the cache descriptor types we care about (no TLB or trace cache entries) */
+static struct _cache_table cache_table[] __initdata =
+{
+	{ 0x06, LVL_1_INST, 8 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x08, LVL_1_INST, 16 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x0a, LVL_1_DATA, 8 },	/* 2 way set assoc, 32 byte line size */
+	{ 0x0c, LVL_1_DATA, 16 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x22, LVL_3,      512 },	/* 4-way set assoc, sectored cache, 64 byte line size */
+	{ 0x23, LVL_3,      1024 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x25, LVL_3,      2048 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x29, LVL_3,      4096 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x2c, LVL_1_DATA, 32 },	/* 8-way set assoc, 64 byte line size */
+	{ 0x30, LVL_1_INST, 32 },	/* 8-way set assoc, 64 byte line size */
+	{ 0x39, LVL_2,      128 },	/* 4-way set assoc, sectored cache, 64 byte line size */
+	{ 0x3b, LVL_2,      128 },	/* 2-way set assoc, sectored cache, 64 byte line size */
+	{ 0x3c, LVL_2,      256 },	/* 4-way set assoc, sectored cache, 64 byte line size */
+	{ 0x41, LVL_2,      128 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x42, LVL_2,      256 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x43, LVL_2,      512 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x44, LVL_2,      1024 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x45, LVL_2,      2048 },	/* 4-way set assoc, 32 byte line size */
+	{ 0x60, LVL_1_DATA, 16 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x66, LVL_1_DATA, 8 },	/* 4-way set assoc, sectored cache, 64 byte line size */
+	{ 0x67, LVL_1_DATA, 16 },	/* 4-way set assoc, sectored cache, 64 byte line size */
+	{ 0x68, LVL_1_DATA, 32 },	/* 4-way set assoc, sectored cache, 64 byte line size */
+	{ 0x70, LVL_TRACE,  12 },	/* 8-way set assoc */
+	{ 0x71, LVL_TRACE,  16 },	/* 8-way set assoc */
+	{ 0x72, LVL_TRACE,  32 },	/* 8-way set assoc */
+	{ 0x78, LVL_2,    1024 },	/* 4-way set assoc, 64 byte line size */
+	{ 0x79, LVL_2,     128 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x7a, LVL_2,     256 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x7b, LVL_2,     512 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x7c, LVL_2,    1024 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x7d, LVL_2,    2048 },	/* 8-way set assoc, 64 byte line size */
+	{ 0x7f, LVL_2,     512 },	/* 2-way set assoc, 64 byte line size */
+	{ 0x82, LVL_2,     256 },	/* 8-way set assoc, 32 byte line size */
+	{ 0x83, LVL_2,     512 },	/* 8-way set assoc, 32 byte line size */
+	{ 0x84, LVL_2,    1024 },	/* 8-way set assoc, 32 byte line size */
+	{ 0x85, LVL_2,    2048 },	/* 8-way set assoc, 32 byte line size */
+	{ 0x86, LVL_2,     512 },	/* 4-way set assoc, 64 byte line size */
+	{ 0x87, LVL_2,    1024 },	/* 8-way set assoc, 64 byte line size */
+	{ 0x00, 0, 0}
+};
+
+
+enum _cache_type
+{
+	CACHE_TYPE_NULL	= 0,
+	CACHE_TYPE_DATA = 1,
+	CACHE_TYPE_INST = 2,
+	CACHE_TYPE_UNIFIED = 3
+};
+
+union _cpuid4_leaf_eax {
+	struct {
+		enum _cache_type	type:5;
+		unsigned int		level:3;
+		unsigned int		is_self_initializing:1;
+		unsigned int		is_fully_associative:1;
+		unsigned int		reserved:4;
+		unsigned int		num_threads_sharing:12;
+		unsigned int		num_cores_on_die:6;
+	} split;
+	u32 full;
+};
+
+union _cpuid4_leaf_ebx {
+	struct {
+		unsigned int		coherency_line_size:12;
+		unsigned int		physical_line_partition:10;
+		unsigned int		ways_of_associativity:10;
+	} split;
+	u32 full;
+};
+
+union _cpuid4_leaf_ecx {
+	struct {
+		unsigned int		number_of_sets:32;
+	} split;
+	u32 full;
+};
+
+struct _cpuid4_info {
+	union _cpuid4_leaf_eax eax;
+	union _cpuid4_leaf_ebx ebx;
+	union _cpuid4_leaf_ecx ecx;
+	unsigned long size;
+	cpumask_t shared_cpu_map;
+};
+
+#define MAX_CACHE_LEAVES		4
+static unsigned short __devinitdata	num_cache_leaves;
+
+static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+{
+	unsigned int		eax, ebx, ecx, edx;
+	union _cpuid4_leaf_eax	cache_eax;
+
+	cpuid_count(4, index, &eax, &ebx, &ecx, &edx);
+	cache_eax.full = eax;
+	if (cache_eax.split.type == CACHE_TYPE_NULL)
+		return -1;
+
+	this_leaf->eax.full = eax;
+	this_leaf->ebx.full = ebx;
+	this_leaf->ecx.full = ecx;
+	this_leaf->size = (this_leaf->ecx.split.number_of_sets + 1) *
+		(this_leaf->ebx.split.coherency_line_size + 1) *
+		(this_leaf->ebx.split.physical_line_partition + 1) *
+		(this_leaf->ebx.split.ways_of_associativity + 1);
+	return 0;
+}
+
+static int __init find_num_cache_leaves(void)
+{
+	unsigned int		eax, ebx, ecx, edx;
+	union _cpuid4_leaf_eax	cache_eax;
+	int 			i;
+	int 			retval;
+
+	retval = MAX_CACHE_LEAVES;
+	/* Do cpuid(4) loop to find out num_cache_leaves */
+	for (i = 0; i < MAX_CACHE_LEAVES; i++) {
+		cpuid_count(4, i, &eax, &ebx, &ecx, &edx);
+		cache_eax.full = eax;
+		if (cache_eax.split.type == CACHE_TYPE_NULL) {
+			retval = i;
+			break;
+		}
+	}
+	return retval;
+}
+
+unsigned int __init init_intel_cacheinfo(struct cpuinfo_x86 *c)
+{
+	unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
+	unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
+	unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */
+
+	if (c->cpuid_level > 4) {
+		static int is_initialized;
+
+		if (is_initialized == 0) {
+			/* Init num_cache_leaves from boot CPU */
+			num_cache_leaves = find_num_cache_leaves();
+			is_initialized++;
+		}
+
+		/*
+		 * Whenever possible use cpuid(4), deterministic cache
+		 * parameters cpuid leaf to find the cache details
+		 */
+		for (i = 0; i < num_cache_leaves; i++) {
+			struct _cpuid4_info this_leaf;
+
+			int retval;
+
+			retval = cpuid4_cache_lookup(i, &this_leaf);
+			if (retval >= 0) {
+				switch(this_leaf.eax.split.level) {
+				    case 1:
+					if (this_leaf.eax.split.type ==
+							CACHE_TYPE_DATA)
+						new_l1d = this_leaf.size/1024;
+					else if (this_leaf.eax.split.type ==
+							CACHE_TYPE_INST)
+						new_l1i = this_leaf.size/1024;
+					break;
+				    case 2:
+					new_l2 = this_leaf.size/1024;
+					break;
+				    case 3:
+					new_l3 = this_leaf.size/1024;
+					break;
+				    default:
+					break;
+				}
+			}
+		}
+	}
+	if (c->cpuid_level > 1) {
+		/* supports eax=2  call */
+		int i, j, n;
+		int regs[4];
+		unsigned char *dp = (unsigned char *)regs;
+
+		/* Number of times to iterate */
+		n = cpuid_eax(2) & 0xFF;
+
+		for ( i = 0 ; i < n ; i++ ) {
+			cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]);
+
+			/* If bit 31 is set, this is an unknown format */
+			for ( j = 0 ; j < 3 ; j++ ) {
+				if ( regs[j] < 0 ) regs[j] = 0;
+			}
+
+			/* Byte 0 is level count, not a descriptor */
+			for ( j = 1 ; j < 16 ; j++ ) {
+				unsigned char des = dp[j];
+				unsigned char k = 0;
+
+				/* look up this descriptor in the table */
+				while (cache_table[k].descriptor != 0)
+				{
+					if (cache_table[k].descriptor == des) {
+						switch (cache_table[k].cache_type) {
+						case LVL_1_INST:
+							l1i += cache_table[k].size;
+							break;
+						case LVL_1_DATA:
+							l1d += cache_table[k].size;
+							break;
+						case LVL_2:
+							l2 += cache_table[k].size;
+							break;
+						case LVL_3:
+							l3 += cache_table[k].size;
+							break;
+						case LVL_TRACE:
+							trace += cache_table[k].size;
+							break;
+						}
+
+						break;
+					}
+
+					k++;
+				}
+			}
+		}
+
+		if (new_l1d)
+			l1d = new_l1d;
+
+		if (new_l1i)
+			l1i = new_l1i;
+
+		if (new_l2)
+			l2 = new_l2;
+
+		if (new_l3)
+			l3 = new_l3;
+
+		if ( trace )
+			printk (KERN_INFO "CPU: Trace cache: %dK uops", trace);
+		else if ( l1i )
+			printk (KERN_INFO "CPU: L1 I cache: %dK", l1i);
+		if ( l1d )
+			printk(", L1 D cache: %dK\n", l1d);
+		else
+			printk("\n");
+		if ( l2 )
+			printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
+		if ( l3 )
+			printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
+
+		/*
+		 * This assumes the L3 cache is shared; it typically lives in
+		 * the northbridge.  The L1 caches are included by the L2
+		 * cache, and so should not be included for the purpose of
+		 * SMP switching weights.
+		 */
+		c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+	}
+
+	return l2;
+}
+
+/* pointer to _cpuid4_info array (for each cache leaf) */
+static struct _cpuid4_info *cpuid4_info[NR_CPUS];
+#define CPUID4_INFO_IDX(x,y)    (&((cpuid4_info[x])[y]))
+
+#ifdef CONFIG_SMP
+static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+	struct _cpuid4_info	*this_leaf;
+	unsigned long num_threads_sharing;
+
+	this_leaf = CPUID4_INFO_IDX(cpu, index);
+	num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
+
+	if (num_threads_sharing == 1)
+		cpu_set(cpu, this_leaf->shared_cpu_map);
+#ifdef CONFIG_X86_HT
+	else if (num_threads_sharing == smp_num_siblings)
+		this_leaf->shared_cpu_map = cpu_sibling_map[cpu];
+#endif
+	else
+		printk(KERN_INFO "Number of CPUs sharing cache didn't match "
+				"any known set of CPUs\n");
+}
+#else
+static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {}
+#endif
+
+static void free_cache_attributes(unsigned int cpu)
+{
+	kfree(cpuid4_info[cpu]);
+	cpuid4_info[cpu] = NULL;
+}
+
+static int __devinit detect_cache_attributes(unsigned int cpu)
+{
+	struct _cpuid4_info	*this_leaf;
+	unsigned long 		j;
+	int 			retval;
+
+	if (num_cache_leaves == 0)
+		return -ENOENT;
+
+	cpuid4_info[cpu] = kmalloc(
+	    sizeof(struct _cpuid4_info) * num_cache_leaves, GFP_KERNEL);
+	if (unlikely(cpuid4_info[cpu] == NULL))
+		return -ENOMEM;
+	memset(cpuid4_info[cpu], 0,
+	    sizeof(struct _cpuid4_info) * num_cache_leaves);
+
+	/* Do cpuid and store the results */
+	for (j = 0; j < num_cache_leaves; j++) {
+		this_leaf = CPUID4_INFO_IDX(cpu, j);
+		retval = cpuid4_cache_lookup(j, this_leaf);
+		if (unlikely(retval < 0))
+			goto err_out;
+		cache_shared_cpu_map_setup(cpu, j);
+	}
+	return 0;
+
+err_out:
+	free_cache_attributes(cpu);
+	return -ENOMEM;
+}
+
+#ifdef CONFIG_SYSFS
+
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */
+
+/* pointer to kobject for cpuX/cache */
+static struct kobject * cache_kobject[NR_CPUS];
+
+struct _index_kobject {
+	struct kobject kobj;
+	unsigned int cpu;
+	unsigned short index;
+};
+
+/* pointer to array of kobjects for cpuX/cache/indexY */
+static struct _index_kobject *index_kobject[NR_CPUS];
+#define INDEX_KOBJECT_PTR(x,y)    (&((index_kobject[x])[y]))
+
+#define show_one_plus(file_name, object, val)				\
+static ssize_t show_##file_name						\
+			(struct _cpuid4_info *this_leaf, char *buf)	\
+{									\
+	return sprintf (buf, "%lu\n", (unsigned long)this_leaf->object + val); \
+}
+
+show_one_plus(level, eax.split.level, 0);
+show_one_plus(coherency_line_size, ebx.split.coherency_line_size, 1);
+show_one_plus(physical_line_partition, ebx.split.physical_line_partition, 1);
+show_one_plus(ways_of_associativity, ebx.split.ways_of_associativity, 1);
+show_one_plus(number_of_sets, ecx.split.number_of_sets, 1);
+
+static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf)
+{
+	return sprintf (buf, "%luK\n", this_leaf->size / 1024);
+}
+
+static ssize_t show_shared_cpu_map(struct _cpuid4_info *this_leaf, char *buf)
+{
+	char mask_str[NR_CPUS];
+	cpumask_scnprintf(mask_str, NR_CPUS, this_leaf->shared_cpu_map);
+	return sprintf(buf, "%s\n", mask_str);
+}
+
+static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) {
+	switch(this_leaf->eax.split.type) {
+	    case CACHE_TYPE_DATA:
+		return sprintf(buf, "Data\n");
+		break;
+	    case CACHE_TYPE_INST:
+		return sprintf(buf, "Instruction\n");
+		break;
+	    case CACHE_TYPE_UNIFIED:
+		return sprintf(buf, "Unified\n");
+		break;
+	    default:
+		return sprintf(buf, "Unknown\n");
+		break;
+	}
+}
+
+struct _cache_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct _cpuid4_info *, char *);
+	ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count);
+};
+
+#define define_one_ro(_name) \
+static struct _cache_attr _name = \
+	__ATTR(_name, 0444, show_##_name, NULL)
+
+define_one_ro(level);
+define_one_ro(type);
+define_one_ro(coherency_line_size);
+define_one_ro(physical_line_partition);
+define_one_ro(ways_of_associativity);
+define_one_ro(number_of_sets);
+define_one_ro(size);
+define_one_ro(shared_cpu_map);
+
+static struct attribute * default_attrs[] = {
+	&type.attr,
+	&level.attr,
+	&coherency_line_size.attr,
+	&physical_line_partition.attr,
+	&ways_of_associativity.attr,
+	&number_of_sets.attr,
+	&size.attr,
+	&shared_cpu_map.attr,
+	NULL
+};
+
+#define to_object(k) container_of(k, struct _index_kobject, kobj)
+#define to_attr(a) container_of(a, struct _cache_attr, attr)
+
+static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
+{
+	struct _cache_attr *fattr = to_attr(attr);
+	struct _index_kobject *this_leaf = to_object(kobj);
+	ssize_t ret;
+
+	ret = fattr->show ?
+		fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
+			buf) :
+	       	0;
+	return ret;
+}
+
+static ssize_t store(struct kobject * kobj, struct attribute * attr,
+		     const char * buf, size_t count)
+{
+	return 0;
+}
+
+static struct sysfs_ops sysfs_ops = {
+	.show   = show,
+	.store  = store,
+};
+
+static struct kobj_type ktype_cache = {
+	.sysfs_ops	= &sysfs_ops,
+	.default_attrs	= default_attrs,
+};
+
+static struct kobj_type ktype_percpu_entry = {
+	.sysfs_ops	= &sysfs_ops,
+};
+
+static void cpuid4_cache_sysfs_exit(unsigned int cpu)
+{
+	kfree(cache_kobject[cpu]);
+	kfree(index_kobject[cpu]);
+	cache_kobject[cpu] = NULL;
+	index_kobject[cpu] = NULL;
+	free_cache_attributes(cpu);
+}
+
+static int __devinit cpuid4_cache_sysfs_init(unsigned int cpu)
+{
+
+	if (num_cache_leaves == 0)
+		return -ENOENT;
+
+	detect_cache_attributes(cpu);
+	if (cpuid4_info[cpu] == NULL)
+		return -ENOENT;
+
+	/* Allocate all required memory */
+	cache_kobject[cpu] = kmalloc(sizeof(struct kobject), GFP_KERNEL);
+	if (unlikely(cache_kobject[cpu] == NULL))
+		goto err_out;
+	memset(cache_kobject[cpu], 0, sizeof(struct kobject));
+
+	index_kobject[cpu] = kmalloc(
+	    sizeof(struct _index_kobject ) * num_cache_leaves, GFP_KERNEL);
+	if (unlikely(index_kobject[cpu] == NULL))
+		goto err_out;
+	memset(index_kobject[cpu], 0,
+	    sizeof(struct _index_kobject) * num_cache_leaves);
+
+	return 0;
+
+err_out:
+	cpuid4_cache_sysfs_exit(cpu);
+	return -ENOMEM;
+}
+
+/* Add/Remove cache interface for CPU device */
+static int __devinit cache_add_dev(struct sys_device * sys_dev)
+{
+	unsigned int cpu = sys_dev->id;
+	unsigned long i, j;
+	struct _index_kobject *this_object;
+	int retval = 0;
+
+	retval = cpuid4_cache_sysfs_init(cpu);
+	if (unlikely(retval < 0))
+		return retval;
+
+	cache_kobject[cpu]->parent = &sys_dev->kobj;
+	kobject_set_name(cache_kobject[cpu], "%s", "cache");
+	cache_kobject[cpu]->ktype = &ktype_percpu_entry;
+	retval = kobject_register(cache_kobject[cpu]);
+
+	for (i = 0; i < num_cache_leaves; i++) {
+		this_object = INDEX_KOBJECT_PTR(cpu,i);
+		this_object->cpu = cpu;
+		this_object->index = i;
+		this_object->kobj.parent = cache_kobject[cpu];
+		kobject_set_name(&(this_object->kobj), "index%1lu", i);
+		this_object->kobj.ktype = &ktype_cache;
+		retval = kobject_register(&(this_object->kobj));
+		if (unlikely(retval)) {
+			for (j = 0; j < i; j++) {
+				kobject_unregister(
+					&(INDEX_KOBJECT_PTR(cpu,j)->kobj));
+			}
+			kobject_unregister(cache_kobject[cpu]);
+			cpuid4_cache_sysfs_exit(cpu);
+			break;
+		}
+	}
+	return retval;
+}
+
+static int __devexit cache_remove_dev(struct sys_device * sys_dev)
+{
+	unsigned int cpu = sys_dev->id;
+	unsigned long i;
+
+	for (i = 0; i < num_cache_leaves; i++)
+		kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
+	kobject_unregister(cache_kobject[cpu]);
+	cpuid4_cache_sysfs_exit(cpu);
+	return 0;
+}
+
+static struct sysdev_driver cache_sysdev_driver = {
+	.add = cache_add_dev,
+	.remove = __devexit_p(cache_remove_dev),
+};
+
+/* Register/Unregister the cpu_cache driver */
+static int __devinit cache_register_driver(void)
+{
+	if (num_cache_leaves == 0)
+		return 0;
+
+	return sysdev_driver_register(&cpu_sysdev_class,&cache_sysdev_driver);
+}
+
+device_initcall(cache_register_driver);
+
+#endif
+
diff --git a/arch/i386/kernel/cpu/mcheck/Makefile b/arch/i386/kernel/cpu/mcheck/Makefile
new file mode 100644
index 000000000000..30808f3d6715
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/Makefile
@@ -0,0 +1,2 @@
+obj-y	=	mce.o k7.o p4.o p5.o p6.o winchip.o
+obj-$(CONFIG_X86_MCE_NONFATAL)	+=	non-fatal.o
diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c
new file mode 100644
index 000000000000..8df52e86c4d2
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/k7.c
@@ -0,0 +1,97 @@
+/*
+ * Athlon/Hammer specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Dave Jones <davej@codemonkey.org.uk>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For AMD Athlon/Duron */
+static fastcall void k7_machine_check(struct pt_regs * regs, long error_code)
+{
+	int recover=1;
+	u32 alow, ahigh, high, low;
+	u32 mcgstl, mcgsth;
+	int i;
+
+	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	if (mcgstl & (1<<0))	/* Recoverable ? */
+		recover=0;
+
+	printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+		smp_processor_id(), mcgsth, mcgstl);
+
+	for (i=1; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+		if (high&(1<<31)) {
+			if (high & (1<<29))
+				recover |= 1;
+			if (high & (1<<25))
+				recover |= 2;
+			printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+			high &= ~(1<<31);
+			if (high & (1<<27)) {
+				rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+				printk ("[%08x%08x]", ahigh, alow);
+			}
+			if (high & (1<<26)) {
+				rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+				printk (" at %08x%08x", ahigh, alow);
+			}
+			printk ("\n");
+			/* Clear it */
+			wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+			/* Serialize */
+			wmb();
+			add_taint(TAINT_MACHINE_CHECK);
+		}
+	}
+
+	if (recover&2)
+		panic ("CPU context corrupt");
+	if (recover&1)
+		panic ("Unable to continue");
+	printk (KERN_EMERG "Attempting to continue.\n");
+	mcgstl &= ~(1<<2);
+	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+
+/* AMD K7 machine check is Intel like */
+void __init amd_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	int i;
+
+	machine_check_vector = k7_machine_check;
+	wmb();
+
+	printk (KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<8))	/* Control register present ? */
+		wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+	nr_mce_banks = l & 0xff;
+
+	/* Clear status for MC index 0 separately, we don't touch CTL,
+	 * as some Athlons cause spurious MCEs when its enabled. */
+	wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0);
+	for (i=1; i<nr_mce_banks; i++) {
+		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	}
+
+	set_in_cr4 (X86_CR4_MCE);
+	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+		smp_processor_id());
+}
diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c
new file mode 100644
index 000000000000..bf6d1aefafc0
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/mce.c
@@ -0,0 +1,77 @@
+/*
+ * mce.c - x86 Machine Check Exception Reporting
+ * (c) 2002 Alan Cox <alan@redhat.com>, Dave Jones <davej@codemonkey.org.uk>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+
+#include "mce.h"
+
+int mce_disabled __initdata = 0;
+int nr_mce_banks;
+
+EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
+
+/* Handle unconfigured int18 (should never happen) */
+static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_code)
+{	
+	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check;
+
+/* This has to be run for each processor */
+void __init mcheck_init(struct cpuinfo_x86 *c)
+{
+	if (mce_disabled==1)
+		return;
+
+	switch (c->x86_vendor) {
+		case X86_VENDOR_AMD:
+			if (c->x86==6 || c->x86==15)
+				amd_mcheck_init(c);
+			break;
+
+		case X86_VENDOR_INTEL:
+			if (c->x86==5)
+				intel_p5_mcheck_init(c);
+			if (c->x86==6)
+				intel_p6_mcheck_init(c);
+			if (c->x86==15)
+				intel_p4_mcheck_init(c);
+			break;
+
+		case X86_VENDOR_CENTAUR:
+			if (c->x86==5)
+				winchip_mcheck_init(c);
+			break;
+
+		default:
+			break;
+	}
+}
+
+static int __init mcheck_disable(char *str)
+{
+	mce_disabled = 1;
+	return 0;
+}
+
+static int __init mcheck_enable(char *str)
+{
+	mce_disabled = -1;
+	return 0;
+}
+
+__setup("nomce", mcheck_disable);
+__setup("mce", mcheck_enable);
diff --git a/arch/i386/kernel/cpu/mcheck/mce.h b/arch/i386/kernel/cpu/mcheck/mce.h
new file mode 100644
index 000000000000..dc2416dfef15
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/mce.h
@@ -0,0 +1,14 @@
+#include <linux/init.h>
+
+void amd_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
+void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
+void winchip_mcheck_init(struct cpuinfo_x86 *c);
+
+/* Call the installed machine check handler for this CPU setup. */
+extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code);
+
+extern int mce_disabled __initdata;
+extern int nr_mce_banks;
+
diff --git a/arch/i386/kernel/cpu/mcheck/non-fatal.c b/arch/i386/kernel/cpu/mcheck/non-fatal.c
new file mode 100644
index 000000000000..7864ddfccf07
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/non-fatal.c
@@ -0,0 +1,93 @@
+/*
+ * Non Fatal Machine Check Exception Reporting
+ *
+ * (C) Copyright 2002 Dave Jones. <davej@codemonkey.org.uk>
+ *
+ * This file contains routines to check for non-fatal MCEs every 15s
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+static int firstbank;
+
+#define MCE_RATE	15*HZ	/* timer rate is 15s */
+
+static void mce_checkregs (void *info)
+{
+	u32 low, high;
+	int i;
+
+	for (i=firstbank; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high);
+
+		if (high & (1<<31)) {
+			printk(KERN_INFO "MCE: The hardware reports a non "
+				"fatal, correctable incident occurred on "
+				"CPU %d.\n",
+				smp_processor_id());
+			printk (KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
+
+			/* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
+			wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+
+			/* Serialize */
+			wmb();
+			add_taint(TAINT_MACHINE_CHECK);
+		}
+	}
+}
+
+static void mce_work_fn(void *data);
+static DECLARE_WORK(mce_work, mce_work_fn, NULL);
+
+static void mce_work_fn(void *data)
+{ 
+	on_each_cpu(mce_checkregs, NULL, 1, 1);
+	schedule_delayed_work(&mce_work, MCE_RATE);
+} 
+
+static int __init init_nonfatal_mce_checker(void)
+{
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	/* Check for MCE support */
+	if (!cpu_has(c, X86_FEATURE_MCE))
+		return -ENODEV;
+
+	/* Check for PPro style MCA */
+	if (!cpu_has(c, X86_FEATURE_MCA))
+		return -ENODEV;
+
+	/* Some Athlons misbehave when we frob bank 0 */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+		boot_cpu_data.x86 == 6)
+			firstbank = 1;
+	else
+			firstbank = 0;
+
+	/*
+	 * Check for non-fatal errors every MCE_RATE s
+	 */
+	schedule_delayed_work(&mce_work, MCE_RATE);
+	printk(KERN_INFO "Machine check exception polling timer started.\n");
+	return 0;
+}
+module_init(init_nonfatal_mce_checker);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c
new file mode 100644
index 000000000000..8b16ceb929b4
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/p4.c
@@ -0,0 +1,271 @@
+/*
+ * P4 specific Machine Check Exception Reporting
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+#include <asm/apic.h>
+
+#include "mce.h"
+
+/* as supported by the P4/Xeon family */
+struct intel_mce_extended_msrs {
+	u32 eax;
+	u32 ebx;
+	u32 ecx;
+	u32 edx;
+	u32 esi;
+	u32 edi;
+	u32 ebp;
+	u32 esp;
+	u32 eflags;
+	u32 eip;
+	/* u32 *reserved[]; */
+};
+
+static int mce_num_extended_msrs = 0;
+
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+static void unexpected_thermal_interrupt(struct pt_regs *regs)
+{	
+	printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
+			smp_processor_id());
+	add_taint(TAINT_MACHINE_CHECK);
+}
+
+/* P4/Xeon Thermal transition interrupt handler */
+static void intel_thermal_interrupt(struct pt_regs *regs)
+{
+	u32 l, h;
+	unsigned int cpu = smp_processor_id();
+	static unsigned long next[NR_CPUS];
+
+	ack_APIC_irq();
+
+	if (time_after(next[cpu], jiffies))
+		return;
+
+	next[cpu] = jiffies + HZ*5;
+	rdmsr(MSR_IA32_THERM_STATUS, l, h);
+	if (l & 0x1) {
+		printk(KERN_EMERG "CPU%d: Temperature above threshold\n", cpu);
+		printk(KERN_EMERG "CPU%d: Running in modulated clock mode\n",
+				cpu);
+		add_taint(TAINT_MACHINE_CHECK);
+	} else {
+		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+	}
+}
+
+/* Thermal interrupt handler for this CPU setup */
+static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_thermal_interrupt;
+
+fastcall void smp_thermal_interrupt(struct pt_regs *regs)
+{
+	irq_enter();
+	vendor_thermal_interrupt(regs);
+	irq_exit();
+}
+
+/* P4/Xeon Thermal regulation detect and init */
+static void __init intel_init_thermal(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	unsigned int cpu = smp_processor_id();
+
+	/* Thermal monitoring */
+	if (!cpu_has(c, X86_FEATURE_ACPI))
+		return;	/* -ENODEV */
+
+	/* Clock modulation */
+	if (!cpu_has(c, X86_FEATURE_ACC))
+		return;	/* -ENODEV */
+
+	/* first check if its enabled already, in which case there might
+	 * be some SMM goo which handles it, so we can't even put a handler
+	 * since it might be delivered via SMI already -zwanem.
+	 */
+	rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+	h = apic_read(APIC_LVTTHMR);
+	if ((l & (1<<3)) && (h & APIC_DM_SMI)) {
+		printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
+				cpu);
+		return; /* -EBUSY */
+	}
+
+	/* check whether a vector already exists, temporarily masked? */	
+	if (h & APIC_VECTOR_MASK) {
+		printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
+				"installed\n",
+			cpu, (h & APIC_VECTOR_MASK));
+		return; /* -EBUSY */
+	}
+
+	/* The temperature transition interrupt handler setup */
+	h = THERMAL_APIC_VECTOR;		/* our delivery vector */
+	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);	/* we'll mask till we're ready */
+	apic_write_around(APIC_LVTTHMR, h);
+
+	rdmsr (MSR_IA32_THERM_INTERRUPT, l, h);
+	wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
+
+	/* ok we're good to go... */
+	vendor_thermal_interrupt = intel_thermal_interrupt;
+	
+	rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+	wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
+	
+	l = apic_read (APIC_LVTTHMR);
+	apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+	printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
+	return;
+}
+#endif /* CONFIG_X86_MCE_P4THERMAL */
+
+
+/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
+static inline int intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
+{
+	u32 h;
+
+	if (mce_num_extended_msrs == 0)
+		goto done;
+
+	rdmsr (MSR_IA32_MCG_EAX, r->eax, h);
+	rdmsr (MSR_IA32_MCG_EBX, r->ebx, h);
+	rdmsr (MSR_IA32_MCG_ECX, r->ecx, h);
+	rdmsr (MSR_IA32_MCG_EDX, r->edx, h);
+	rdmsr (MSR_IA32_MCG_ESI, r->esi, h);
+	rdmsr (MSR_IA32_MCG_EDI, r->edi, h);
+	rdmsr (MSR_IA32_MCG_EBP, r->ebp, h);
+	rdmsr (MSR_IA32_MCG_ESP, r->esp, h);
+	rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h);
+	rdmsr (MSR_IA32_MCG_EIP, r->eip, h);
+
+	/* can we rely on kmalloc to do a dynamic
+	 * allocation for the reserved registers?
+	 */
+done:
+	return mce_num_extended_msrs;
+}
+
+static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
+{
+	int recover=1;
+	u32 alow, ahigh, high, low;
+	u32 mcgstl, mcgsth;
+	int i;
+	struct intel_mce_extended_msrs dbg;
+
+	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	if (mcgstl & (1<<0))	/* Recoverable ? */
+		recover=0;
+
+	printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+		smp_processor_id(), mcgsth, mcgstl);
+
+	if (intel_get_extended_msrs(&dbg)) {
+		printk (KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n",
+			smp_processor_id(), dbg.eip, dbg.eflags);
+		printk (KERN_DEBUG "\teax: %08x ebx: %08x ecx: %08x edx: %08x\n",
+			dbg.eax, dbg.ebx, dbg.ecx, dbg.edx);
+		printk (KERN_DEBUG "\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
+			dbg.esi, dbg.edi, dbg.ebp, dbg.esp);
+	}
+
+	for (i=0; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+		if (high & (1<<31)) {
+			if (high & (1<<29))
+				recover |= 1;
+			if (high & (1<<25))
+				recover |= 2;
+			printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+			high &= ~(1<<31);
+			if (high & (1<<27)) {
+				rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+				printk ("[%08x%08x]", ahigh, alow);
+			}
+			if (high & (1<<26)) {
+				rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+				printk (" at %08x%08x", ahigh, alow);
+			}
+			printk ("\n");
+		}
+	}
+
+	if (recover & 2)
+		panic ("CPU context corrupt");
+	if (recover & 1)
+		panic ("Unable to continue");
+
+	printk(KERN_EMERG "Attempting to continue.\n");
+	/* 
+	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+	 * recoverable/continuable.This will allow BIOS to look at the MSRs
+	 * for errors if the OS could not log the error.
+	 */
+	for (i=0; i<nr_mce_banks; i++) {
+		u32 msr;
+		msr = MSR_IA32_MC0_STATUS+i*4;
+		rdmsr (msr, low, high);
+		if (high&(1<<31)) {
+			/* Clear it */
+			wrmsr(msr, 0UL, 0UL);
+			/* Serialize */
+			wmb();
+			add_taint(TAINT_MACHINE_CHECK);
+		}
+	}
+	mcgstl &= ~(1<<2);
+	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+
+void __init intel_p4_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	int i;
+	
+	machine_check_vector = intel_machine_check;
+	wmb();
+
+	printk (KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<8))	/* Control register present ? */
+		wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+	nr_mce_banks = l & 0xff;
+
+	for (i=0; i<nr_mce_banks; i++) {
+		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	}
+
+	set_in_cr4 (X86_CR4_MCE);
+	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+		smp_processor_id());
+
+	/* Check for P4/Xeon extended MCE MSRs */
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<9))	{/* MCG_EXT_P */
+		mce_num_extended_msrs = (l >> 16) & 0xff;
+		printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
+				" available\n",
+			smp_processor_id(), mce_num_extended_msrs);
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+		/* Check for P4/Xeon Thermal monitor */
+		intel_init_thermal(c);
+#endif
+	}
+}
diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c
new file mode 100644
index 000000000000..c45a1b485c80
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/p5.c
@@ -0,0 +1,54 @@
+/*
+ * P5 specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for Pentium class Intel */
+static fastcall void pentium_machine_check(struct pt_regs * regs, long error_code)
+{
+	u32 loaddr, hi, lotype;
+	rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
+	rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
+	printk(KERN_EMERG "CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
+	if(lotype&(1<<5))
+		printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
+	add_taint(TAINT_MACHINE_CHECK);
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p5_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	
+	/*Check for MCE support */
+	if( !cpu_has(c, X86_FEATURE_MCE) )
+		return;	
+
+	/* Default P5 to off as its often misconnected */
+	if(mce_disabled != -1)
+		return;
+	machine_check_vector = pentium_machine_check;
+	wmb();
+
+	/* Read registers before enabling */
+	rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
+	rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
+	printk(KERN_INFO "Intel old style machine check architecture supported.\n");
+
+ 	/* Enable MCE */
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
+}
diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c
new file mode 100644
index 000000000000..46640f8c2494
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/p6.c
@@ -0,0 +1,115 @@
+/*
+ * P6 specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine Check Handler For PII/PIII */
+static fastcall void intel_machine_check(struct pt_regs * regs, long error_code)
+{
+	int recover=1;
+	u32 alow, ahigh, high, low;
+	u32 mcgstl, mcgsth;
+	int i;
+
+	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	if (mcgstl & (1<<0))	/* Recoverable ? */
+		recover=0;
+
+	printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
+		smp_processor_id(), mcgsth, mcgstl);
+
+	for (i=0; i<nr_mce_banks; i++) {
+		rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high);
+		if (high & (1<<31)) {
+			if (high & (1<<29))
+				recover |= 1;
+			if (high & (1<<25))
+				recover |= 2;
+			printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low);
+			high &= ~(1<<31);
+			if (high & (1<<27)) {
+				rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh);
+				printk ("[%08x%08x]", ahigh, alow);
+			}
+			if (high & (1<<26)) {
+				rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
+				printk (" at %08x%08x", ahigh, alow);
+			}
+			printk ("\n");
+		}
+	}
+
+	if (recover & 2)
+		panic ("CPU context corrupt");
+	if (recover & 1)
+		panic ("Unable to continue");
+
+	printk (KERN_EMERG "Attempting to continue.\n");
+	/* 
+	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+	 * recoverable/continuable.This will allow BIOS to look at the MSRs
+	 * for errors if the OS could not log the error.
+	 */
+	for (i=0; i<nr_mce_banks; i++) {
+		unsigned int msr;
+		msr = MSR_IA32_MC0_STATUS+i*4;
+		rdmsr (msr,low, high);
+		if (high & (1<<31)) {
+			/* Clear it */
+			wrmsr (msr, 0UL, 0UL);
+			/* Serialize */
+			wmb();
+			add_taint(TAINT_MACHINE_CHECK);
+		}
+	}
+	mcgstl &= ~(1<<2);
+	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+}
+
+/* Set up machine check reporting for processors with Intel style MCE */
+void __init intel_p6_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 l, h;
+	int i;
+	
+	/* Check for MCE support */
+	if (!cpu_has(c, X86_FEATURE_MCE))
+		return;
+
+	/* Check for PPro style MCA */
+ 	if (!cpu_has(c, X86_FEATURE_MCA))
+		return;
+
+	/* Ok machine check is available */
+	machine_check_vector = intel_machine_check;
+	wmb();
+
+	printk (KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	if (l & (1<<8))	/* Control register present ? */
+		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+	nr_mce_banks = l & 0xff;
+
+	/* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
+	for (i=1; i<nr_mce_banks; i++) {
+		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	}
+
+	set_in_cr4 (X86_CR4_MCE);
+	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+		smp_processor_id());
+}
diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c
new file mode 100644
index 000000000000..753fa7acb984
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/winchip.c
@@ -0,0 +1,37 @@
+/*
+ * IDT Winchip specific Machine Check Exception Reporting
+ * (C) Copyright 2002 Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/processor.h> 
+#include <asm/system.h>
+#include <asm/msr.h>
+
+#include "mce.h"
+
+/* Machine check handler for WinChip C6 */
+static fastcall void winchip_machine_check(struct pt_regs * regs, long error_code)
+{
+	printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
+	add_taint(TAINT_MACHINE_CHECK);
+}
+
+/* Set up machine check reporting on the Winchip C6 series */
+void __init winchip_mcheck_init(struct cpuinfo_x86 *c)
+{
+	u32 lo, hi;
+	machine_check_vector = winchip_machine_check;
+	wmb();
+	rdmsr(MSR_IDT_FCR1, lo, hi);
+	lo|= (1<<2);	/* Enable EIERRINT (int 18 MCE) */
+	lo&= ~(1<<4);	/* Enable MCE */
+	wrmsr(MSR_IDT_FCR1, lo, hi);
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
+}
diff --git a/arch/i386/kernel/cpu/mtrr/Makefile b/arch/i386/kernel/cpu/mtrr/Makefile
new file mode 100644
index 000000000000..a25b701ab84e
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/Makefile
@@ -0,0 +1,5 @@
+obj-y		:= main.o if.o generic.o state.o
+obj-y		+= amd.o
+obj-y		+= cyrix.o
+obj-y		+= centaur.o
+
diff --git a/arch/i386/kernel/cpu/mtrr/amd.c b/arch/i386/kernel/cpu/mtrr/amd.c
new file mode 100644
index 000000000000..1a1e04b6fd00
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/amd.c
@@ -0,0 +1,121 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+
+#include "mtrr.h"
+
+static void
+amd_get_mtrr(unsigned int reg, unsigned long *base,
+	     unsigned int *size, mtrr_type * type)
+{
+	unsigned long low, high;
+
+	rdmsr(MSR_K6_UWCCR, low, high);
+	/*  Upper dword is region 1, lower is region 0  */
+	if (reg == 1)
+		low = high;
+	/*  The base masks off on the right alignment  */
+	*base = (low & 0xFFFE0000) >> PAGE_SHIFT;
+	*type = 0;
+	if (low & 1)
+		*type = MTRR_TYPE_UNCACHABLE;
+	if (low & 2)
+		*type = MTRR_TYPE_WRCOMB;
+	if (!(low & 3)) {
+		*size = 0;
+		return;
+	}
+	/*
+	 *  This needs a little explaining. The size is stored as an
+	 *  inverted mask of bits of 128K granularity 15 bits long offset
+	 *  2 bits
+	 *
+	 *  So to get a size we do invert the mask and add 1 to the lowest
+	 *  mask bit (4 as its 2 bits in). This gives us a size we then shift
+	 *  to turn into 128K blocks
+	 *
+	 *  eg              111 1111 1111 1100      is 512K
+	 *
+	 *  invert          000 0000 0000 0011
+	 *  +1              000 0000 0000 0100
+	 *  *128K   ...
+	 */
+	low = (~low) & 0x1FFFC;
+	*size = (low + 4) << (15 - PAGE_SHIFT);
+	return;
+}
+
+static void amd_set_mtrr(unsigned int reg, unsigned long base,
+			 unsigned long size, mtrr_type type)
+/*  [SUMMARY] Set variable MTRR register on the local CPU.
+    <reg> The register to set.
+    <base> The base address of the region.
+    <size> The size of the region. If this is 0 the region is disabled.
+    <type> The type of the region.
+    <do_safe> If TRUE, do the change safely. If FALSE, safety measures should
+    be done externally.
+    [RETURNS] Nothing.
+*/
+{
+	u32 regs[2];
+
+	/*
+	 *  Low is MTRR0 , High MTRR 1
+	 */
+	rdmsr(MSR_K6_UWCCR, regs[0], regs[1]);
+	/*
+	 *  Blank to disable
+	 */
+	if (size == 0)
+		regs[reg] = 0;
+	else
+		/* Set the register to the base, the type (off by one) and an
+		   inverted bitmask of the size The size is the only odd
+		   bit. We are fed say 512K We invert this and we get 111 1111
+		   1111 1011 but if you subtract one and invert you get the   
+		   desired 111 1111 1111 1100 mask
+
+		   But ~(x - 1) == ~x + 1 == -x. Two's complement rocks!  */
+		regs[reg] = (-size >> (15 - PAGE_SHIFT) & 0x0001FFFC)
+		    | (base << PAGE_SHIFT) | (type + 1);
+
+	/*
+	 *  The writeback rule is quite specific. See the manual. Its
+	 *  disable local interrupts, write back the cache, set the mtrr
+	 */
+	wbinvd();
+	wrmsr(MSR_K6_UWCCR, regs[0], regs[1]);
+}
+
+static int amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+{
+	/* Apply the K6 block alignment and size rules
+	   In order
+	   o Uncached or gathering only
+	   o 128K or bigger block
+	   o Power of 2 block
+	   o base suitably aligned to the power
+	*/
+	if (type > MTRR_TYPE_WRCOMB || size < (1 << (17 - PAGE_SHIFT))
+	    || (size & ~(size - 1)) - size || (base & (size - 1)))
+		return -EINVAL;
+	return 0;
+}
+
+static struct mtrr_ops amd_mtrr_ops = {
+	.vendor            = X86_VENDOR_AMD,
+	.set               = amd_set_mtrr,
+	.get               = amd_get_mtrr,
+	.get_free_region   = generic_get_free_region,
+	.validate_add_page = amd_validate_add_page,
+	.have_wrcomb       = positive_have_wrcomb,
+};
+
+int __init amd_init_mtrr(void)
+{
+	set_mtrr_ops(&amd_mtrr_ops);
+	return 0;
+}
+
+//arch_initcall(amd_mtrr_init);
diff --git a/arch/i386/kernel/cpu/mtrr/centaur.c b/arch/i386/kernel/cpu/mtrr/centaur.c
new file mode 100644
index 000000000000..33f00ac314ef
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/centaur.c
@@ -0,0 +1,223 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include "mtrr.h"
+
+static struct {
+	unsigned long high;
+	unsigned long low;
+} centaur_mcr[8];
+
+static u8 centaur_mcr_reserved;
+static u8 centaur_mcr_type;	/* 0 for winchip, 1 for winchip2 */
+
+/*
+ *	Report boot time MCR setups 
+ */
+
+static int
+centaur_get_free_region(unsigned long base, unsigned long size)
+/*  [SUMMARY] Get a free MTRR.
+    <base> The starting (base) address of the region.
+    <size> The size (in bytes) of the region.
+    [RETURNS] The index of the region on success, else -1 on error.
+*/
+{
+	int i, max;
+	mtrr_type ltype;
+	unsigned long lbase;
+	unsigned int lsize;
+
+	max = num_var_ranges;
+	for (i = 0; i < max; ++i) {
+		if (centaur_mcr_reserved & (1 << i))
+			continue;
+		mtrr_if->get(i, &lbase, &lsize, &ltype);
+		if (lsize == 0)
+			return i;
+	}
+	return -ENOSPC;
+}
+
+void
+mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+{
+	centaur_mcr[mcr].low = lo;
+	centaur_mcr[mcr].high = hi;
+}
+
+static void
+centaur_get_mcr(unsigned int reg, unsigned long *base,
+		unsigned int *size, mtrr_type * type)
+{
+	*base = centaur_mcr[reg].high >> PAGE_SHIFT;
+	*size = -(centaur_mcr[reg].low & 0xfffff000) >> PAGE_SHIFT;
+	*type = MTRR_TYPE_WRCOMB;	/*  If it is there, it is write-combining  */
+	if (centaur_mcr_type == 1 && ((centaur_mcr[reg].low & 31) & 2))
+		*type = MTRR_TYPE_UNCACHABLE;
+	if (centaur_mcr_type == 1 && (centaur_mcr[reg].low & 31) == 25)
+		*type = MTRR_TYPE_WRBACK;
+	if (centaur_mcr_type == 0 && (centaur_mcr[reg].low & 31) == 31)
+		*type = MTRR_TYPE_WRBACK;
+
+}
+
+static void centaur_set_mcr(unsigned int reg, unsigned long base,
+			    unsigned long size, mtrr_type type)
+{
+	unsigned long low, high;
+
+	if (size == 0) {
+		/*  Disable  */
+		high = low = 0;
+	} else {
+		high = base << PAGE_SHIFT;
+		if (centaur_mcr_type == 0)
+			low = -size << PAGE_SHIFT | 0x1f;	/* only support write-combining... */
+		else {
+			if (type == MTRR_TYPE_UNCACHABLE)
+				low = -size << PAGE_SHIFT | 0x02;	/* NC */
+			else
+				low = -size << PAGE_SHIFT | 0x09;	/* WWO,WC */
+		}
+	}
+	centaur_mcr[reg].high = high;
+	centaur_mcr[reg].low = low;
+	wrmsr(MSR_IDT_MCR0 + reg, low, high);
+}
+
+#if 0
+/*
+ *	Initialise the later (saner) Winchip MCR variant. In this version
+ *	the BIOS can pass us the registers it has used (but not their values)
+ *	and the control register is read/write
+ */
+
+static void __init
+centaur_mcr1_init(void)
+{
+	unsigned i;
+	u32 lo, hi;
+
+	/* Unfortunately, MCR's are read-only, so there is no way to
+	 * find out what the bios might have done.
+	 */
+
+	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+	if (((lo >> 17) & 7) == 1) {	/* Type 1 Winchip2 MCR */
+		lo &= ~0x1C0;	/* clear key */
+		lo |= 0x040;	/* set key to 1 */
+		wrmsr(MSR_IDT_MCR_CTRL, lo, hi);	/* unlock MCR */
+	}
+
+	centaur_mcr_type = 1;
+
+	/*
+	 *  Clear any unconfigured MCR's.
+	 */
+
+	for (i = 0; i < 8; ++i) {
+		if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0) {
+			if (!(lo & (1 << (9 + i))))
+				wrmsr(MSR_IDT_MCR0 + i, 0, 0);
+			else
+				/*
+				 *      If the BIOS set up an MCR we cannot see it
+				 *      but we don't wish to obliterate it
+				 */
+				centaur_mcr_reserved |= (1 << i);
+		}
+	}
+	/*  
+	 *  Throw the main write-combining switch... 
+	 *  However if OOSTORE is enabled then people have already done far
+	 *  cleverer things and we should behave. 
+	 */
+
+	lo |= 15;		/* Write combine enables */
+	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+}
+
+/*
+ *	Initialise the original winchip with read only MCR registers
+ *	no used bitmask for the BIOS to pass on and write only control
+ */
+
+static void __init
+centaur_mcr0_init(void)
+{
+	unsigned i;
+
+	/* Unfortunately, MCR's are read-only, so there is no way to
+	 * find out what the bios might have done.
+	 */
+
+	/* Clear any unconfigured MCR's.
+	 * This way we are sure that the centaur_mcr array contains the actual
+	 * values. The disadvantage is that any BIOS tweaks are thus undone.
+	 *
+	 */
+	for (i = 0; i < 8; ++i) {
+		if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0)
+			wrmsr(MSR_IDT_MCR0 + i, 0, 0);
+	}
+
+	wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);	/* Write only */
+}
+
+/*
+ *	Initialise Winchip series MCR registers
+ */
+
+static void __init
+centaur_mcr_init(void)
+{
+	struct set_mtrr_context ctxt;
+
+	set_mtrr_prepare_save(&ctxt);
+	set_mtrr_cache_disable(&ctxt);
+
+	if (boot_cpu_data.x86_model == 4)
+		centaur_mcr0_init();
+	else if (boot_cpu_data.x86_model == 8 || boot_cpu_data.x86_model == 9)
+		centaur_mcr1_init();
+
+	set_mtrr_done(&ctxt);
+}
+#endif
+
+static int centaur_validate_add_page(unsigned long base, 
+				     unsigned long size, unsigned int type)
+{
+	/*
+	 *  FIXME: Winchip2 supports uncached
+	 */
+	if (type != MTRR_TYPE_WRCOMB && 
+	    (centaur_mcr_type == 0 || type != MTRR_TYPE_UNCACHABLE)) {
+		printk(KERN_WARNING
+		       "mtrr: only write-combining%s supported\n",
+		       centaur_mcr_type ? " and uncacheable are"
+		       : " is");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct mtrr_ops centaur_mtrr_ops = {
+	.vendor            = X86_VENDOR_CENTAUR,
+//	.init              = centaur_mcr_init,
+	.set               = centaur_set_mcr,
+	.get               = centaur_get_mcr,
+	.get_free_region   = centaur_get_free_region,
+	.validate_add_page = centaur_validate_add_page,
+	.have_wrcomb       = positive_have_wrcomb,
+};
+
+int __init centaur_init_mtrr(void)
+{
+	set_mtrr_ops(&centaur_mtrr_ops);
+	return 0;
+}
+
+//arch_initcall(centaur_init_mtrr);
diff --git a/arch/i386/kernel/cpu/mtrr/changelog b/arch/i386/kernel/cpu/mtrr/changelog
new file mode 100644
index 000000000000..af1368535955
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/changelog
@@ -0,0 +1,229 @@
+    ChangeLog
+
+    Prehistory Martin Tischhäuser <martin@ikcbarka.fzk.de>
+	       Initial register-setting code (from proform-1.0).
+    19971216   Richard Gooch <rgooch@atnf.csiro.au>
+               Original version for /proc/mtrr interface, SMP-safe.
+  v1.0
+    19971217   Richard Gooch <rgooch@atnf.csiro.au>
+               Bug fix for ioctls()'s.
+	       Added sample code in Documentation/mtrr.txt
+  v1.1
+    19971218   Richard Gooch <rgooch@atnf.csiro.au>
+               Disallow overlapping regions.
+    19971219   Jens Maurer <jmaurer@menuett.rhein-main.de>
+               Register-setting fixups.
+  v1.2
+    19971222   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixups for kernel 2.1.75.
+  v1.3
+    19971229   David Wragg <dpw@doc.ic.ac.uk>
+               Register-setting fixups and conformity with Intel conventions.
+    19971229   Richard Gooch <rgooch@atnf.csiro.au>
+               Cosmetic changes and wrote this ChangeLog ;-)
+    19980106   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixups for kernel 2.1.78.
+  v1.4
+    19980119   David Wragg <dpw@doc.ic.ac.uk>
+               Included passive-release enable code (elsewhere in PCI setup).
+  v1.5
+    19980131   Richard Gooch <rgooch@atnf.csiro.au>
+               Replaced global kernel lock with private spinlock.
+  v1.6
+    19980201   Richard Gooch <rgooch@atnf.csiro.au>
+               Added wait for other CPUs to complete changes.
+  v1.7
+    19980202   Richard Gooch <rgooch@atnf.csiro.au>
+               Bug fix in definition of <set_mtrr> for UP.
+  v1.8
+    19980319   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixups for kernel 2.1.90.
+    19980323   Richard Gooch <rgooch@atnf.csiro.au>
+               Move SMP BIOS fixup before secondary CPUs call <calibrate_delay>
+  v1.9
+    19980325   Richard Gooch <rgooch@atnf.csiro.au>
+               Fixed test for overlapping regions: confused by adjacent regions
+    19980326   Richard Gooch <rgooch@atnf.csiro.au>
+               Added wbinvd in <set_mtrr_prepare>.
+    19980401   Richard Gooch <rgooch@atnf.csiro.au>
+               Bug fix for non-SMP compilation.
+    19980418   David Wragg <dpw@doc.ic.ac.uk>
+               Fixed-MTRR synchronisation for SMP and use atomic operations
+	       instead of spinlocks.
+    19980418   Richard Gooch <rgooch@atnf.csiro.au>
+	       Differentiate different MTRR register classes for BIOS fixup.
+  v1.10
+    19980419   David Wragg <dpw@doc.ic.ac.uk>
+	       Bug fix in variable MTRR synchronisation.
+  v1.11
+    19980419   Richard Gooch <rgooch@atnf.csiro.au>
+	       Fixups for kernel 2.1.97.
+  v1.12
+    19980421   Richard Gooch <rgooch@atnf.csiro.au>
+	       Safer synchronisation across CPUs when changing MTRRs.
+  v1.13
+    19980423   Richard Gooch <rgooch@atnf.csiro.au>
+	       Bugfix for SMP systems without MTRR support.
+  v1.14
+    19980427   Richard Gooch <rgooch@atnf.csiro.au>
+	       Trap calls to <mtrr_add> and <mtrr_del> on non-MTRR machines.
+  v1.15
+    19980427   Richard Gooch <rgooch@atnf.csiro.au>
+	       Use atomic bitops for setting SMP change mask.
+  v1.16
+    19980428   Richard Gooch <rgooch@atnf.csiro.au>
+	       Removed spurious diagnostic message.
+  v1.17
+    19980429   Richard Gooch <rgooch@atnf.csiro.au>
+	       Moved register-setting macros into this file.
+	       Moved setup code from init/main.c to i386-specific areas.
+  v1.18
+    19980502   Richard Gooch <rgooch@atnf.csiro.au>
+	       Moved MTRR detection outside conditionals in <mtrr_init>.
+  v1.19
+    19980502   Richard Gooch <rgooch@atnf.csiro.au>
+	       Documentation improvement: mention Pentium II and AGP.
+  v1.20
+    19980521   Richard Gooch <rgooch@atnf.csiro.au>
+	       Only manipulate interrupt enable flag on local CPU.
+	       Allow enclosed uncachable regions.
+  v1.21
+    19980611   Richard Gooch <rgooch@atnf.csiro.au>
+	       Always define <main_lock>.
+  v1.22
+    19980901   Richard Gooch <rgooch@atnf.csiro.au>
+	       Removed module support in order to tidy up code.
+	       Added sanity check for <mtrr_add>/<mtrr_del> before <mtrr_init>.
+	       Created addition queue for prior to SMP commence.
+  v1.23
+    19980902   Richard Gooch <rgooch@atnf.csiro.au>
+	       Ported patch to kernel 2.1.120-pre3.
+  v1.24
+    19980910   Richard Gooch <rgooch@atnf.csiro.au>
+	       Removed sanity checks and addition queue: Linus prefers an OOPS.
+  v1.25
+    19981001   Richard Gooch <rgooch@atnf.csiro.au>
+	       Fixed harmless compiler warning in include/asm-i386/mtrr.h
+	       Fixed version numbering and history for v1.23 -> v1.24.
+  v1.26
+    19990118   Richard Gooch <rgooch@atnf.csiro.au>
+	       Added devfs support.
+  v1.27
+    19990123   Richard Gooch <rgooch@atnf.csiro.au>
+	       Changed locking to spin with reschedule.
+	       Made use of new <smp_call_function>.
+  v1.28
+    19990201   Zoltán Böszörményi <zboszor@mail.externet.hu>
+	       Extended the driver to be able to use Cyrix style ARRs.
+    19990204   Richard Gooch <rgooch@atnf.csiro.au>
+	       Restructured Cyrix support.
+  v1.29
+    19990204   Zoltán Böszörményi <zboszor@mail.externet.hu>
+	       Refined ARR support: enable MAPEN in set_mtrr_prepare()
+	       and disable MAPEN in set_mtrr_done().
+    19990205   Richard Gooch <rgooch@atnf.csiro.au>
+	       Minor cleanups.
+  v1.30
+    19990208   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Protect plain 6x86s (and other processors without the
+               Page Global Enable feature) against accessing CR4 in
+               set_mtrr_prepare() and set_mtrr_done().
+    19990210   Richard Gooch <rgooch@atnf.csiro.au>
+	       Turned <set_mtrr_up> and <get_mtrr> into function pointers.
+  v1.31
+    19990212   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Major rewrite of cyrix_arr_init(): do not touch ARRs,
+               leave them as the BIOS have set them up.
+               Enable usage of all 8 ARRs.
+               Avoid multiplications by 3 everywhere and other
+               code clean ups/speed ups.
+    19990213   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Set up other Cyrix processors identical to the boot cpu.
+               Since Cyrix don't support Intel APIC, this is l'art pour l'art.
+               Weigh ARRs by size:
+               If size <= 32M is given, set up ARR# we were given.
+               If size >  32M is given, set up ARR7 only if it is free,
+               fail otherwise.
+    19990214   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Also check for size >= 256K if we are to set up ARR7,
+               mtrr_add() returns the value it gets from set_mtrr()
+    19990218   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Remove Cyrix "coma bug" workaround from here.
+               Moved to linux/arch/i386/kernel/setup.c and
+               linux/include/asm-i386/bugs.h
+    19990228   Richard Gooch <rgooch@atnf.csiro.au>
+	       Added MTRRIOC_KILL_ENTRY ioctl(2)
+	       Trap for counter underflow in <mtrr_file_del>.
+	       Trap for 4 MiB aligned regions for PPro, stepping <= 7.
+    19990301   Richard Gooch <rgooch@atnf.csiro.au>
+	       Created <get_free_region> hook.
+    19990305   Richard Gooch <rgooch@atnf.csiro.au>
+	       Temporarily disable AMD support now MTRR capability flag is set.
+  v1.32
+    19990308   Zoltán Böszörményi <zboszor@mail.externet.hu>
+	       Adjust my changes (19990212-19990218) to Richard Gooch's
+	       latest changes. (19990228-19990305)
+  v1.33
+    19990309   Richard Gooch <rgooch@atnf.csiro.au>
+	       Fixed typo in <printk> message.
+    19990310   Richard Gooch <rgooch@atnf.csiro.au>
+	       Support K6-II/III based on Alan Cox's <alan@redhat.com> patches.
+  v1.34
+    19990511   Bart Hartgers <bart@etpmod.phys.tue.nl>
+	       Support Centaur C6 MCR's.
+    19990512   Richard Gooch <rgooch@atnf.csiro.au>
+	       Minor cleanups.
+  v1.35
+    19990707   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Check whether ARR3 is protected in cyrix_get_free_region()
+               and mtrr_del(). The code won't attempt to delete or change it
+               from now on if the BIOS protected ARR3. It silently skips ARR3
+               in cyrix_get_free_region() or returns with an error code from
+               mtrr_del().
+    19990711   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Reset some bits in the CCRs in cyrix_arr_init() to disable SMM
+               if ARR3 isn't protected. This is needed because if SMM is active
+               and ARR3 isn't protected then deleting and setting ARR3 again
+               may lock up the processor. With SMM entirely disabled, it does
+               not happen.
+    19990812   Zoltán Böszörményi <zboszor@mail.externet.hu>
+               Rearrange switch() statements so the driver accomodates to
+               the fact that the AMD Athlon handles its MTRRs the same way
+               as Intel does.
+    19990814   Zoltán Böszörményi <zboszor@mail.externet.hu>
+	       Double check for Intel in mtrr_add()'s big switch() because
+	       that revision check is only valid for Intel CPUs.
+    19990819   Alan Cox <alan@redhat.com>
+               Tested Zoltan's changes on a pre production Athlon - 100%
+               success.
+    19991008   Manfred Spraul <manfreds@colorfullife.com>
+    	       replaced spin_lock_reschedule() with a normal semaphore.
+  v1.36
+    20000221   Richard Gooch <rgooch@atnf.csiro.au>
+               Compile fix if procfs and devfs not enabled.
+	       Formatting changes.
+  v1.37
+    20001109   H. Peter Anvin <hpa@zytor.com>
+	       Use the new centralized CPU feature detects.
+
+  v1.38
+    20010309   Dave Jones <davej@suse.de>
+	       Add support for Cyrix III.
+
+  v1.39
+    20010312   Dave Jones <davej@suse.de>
+               Ugh, I broke AMD support.
+	       Reworked fix by Troels Walsted Hansen <troels@thule.no>
+
+  v1.40
+    20010327   Dave Jones <davej@suse.de>
+	       Adapted Cyrix III support to include VIA C3.
+
+  v2.0
+    20020306   Patrick Mochel <mochel@osdl.org>
+               Split mtrr.c -> mtrr/*.c
+               Converted to Linux Kernel Coding Style
+               Fixed several minor nits in form
+               Moved some SMP-only functions out, so they can be used
+                for power management in the future.
+               TODO: Fix user interface cruft.
diff --git a/arch/i386/kernel/cpu/mtrr/cyrix.c b/arch/i386/kernel/cpu/mtrr/cyrix.c
new file mode 100644
index 000000000000..933b0dd62f48
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/cyrix.c
@@ -0,0 +1,364 @@
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include "mtrr.h"
+
+int arr3_protected;
+
+static void
+cyrix_get_arr(unsigned int reg, unsigned long *base,
+	      unsigned int *size, mtrr_type * type)
+{
+	unsigned long flags;
+	unsigned char arr, ccr3, rcr, shift;
+
+	arr = CX86_ARR_BASE + (reg << 1) + reg;	/* avoid multiplication by 3 */
+
+	/* Save flags and disable interrupts */
+	local_irq_save(flags);
+
+	ccr3 = getCx86(CX86_CCR3);
+	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* enable MAPEN */
+	((unsigned char *) base)[3] = getCx86(arr);
+	((unsigned char *) base)[2] = getCx86(arr + 1);
+	((unsigned char *) base)[1] = getCx86(arr + 2);
+	rcr = getCx86(CX86_RCR_BASE + reg);
+	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
+
+	/* Enable interrupts if it was enabled previously */
+	local_irq_restore(flags);
+	shift = ((unsigned char *) base)[1] & 0x0f;
+	*base >>= PAGE_SHIFT;
+
+	/* Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
+	 * Note: shift==0xf means 4G, this is unsupported.
+	 */
+	if (shift)
+		*size = (reg < 7 ? 0x1UL : 0x40UL) << (shift - 1);
+	else
+		*size = 0;
+
+	/* Bit 0 is Cache Enable on ARR7, Cache Disable on ARR0-ARR6 */
+	if (reg < 7) {
+		switch (rcr) {
+		case 1:
+			*type = MTRR_TYPE_UNCACHABLE;
+			break;
+		case 8:
+			*type = MTRR_TYPE_WRBACK;
+			break;
+		case 9:
+			*type = MTRR_TYPE_WRCOMB;
+			break;
+		case 24:
+		default:
+			*type = MTRR_TYPE_WRTHROUGH;
+			break;
+		}
+	} else {
+		switch (rcr) {
+		case 0:
+			*type = MTRR_TYPE_UNCACHABLE;
+			break;
+		case 8:
+			*type = MTRR_TYPE_WRCOMB;
+			break;
+		case 9:
+			*type = MTRR_TYPE_WRBACK;
+			break;
+		case 25:
+		default:
+			*type = MTRR_TYPE_WRTHROUGH;
+			break;
+		}
+	}
+}
+
+static int
+cyrix_get_free_region(unsigned long base, unsigned long size)
+/*  [SUMMARY] Get a free ARR.
+    <base> The starting (base) address of the region.
+    <size> The size (in bytes) of the region.
+    [RETURNS] The index of the region on success, else -1 on error.
+*/
+{
+	int i;
+	mtrr_type ltype;
+	unsigned long lbase;
+	unsigned int  lsize;
+
+	/* If we are to set up a region >32M then look at ARR7 immediately */
+	if (size > 0x2000) {
+		cyrix_get_arr(7, &lbase, &lsize, &ltype);
+		if (lsize == 0)
+			return 7;
+		/*  Else try ARR0-ARR6 first  */
+	} else {
+		for (i = 0; i < 7; i++) {
+			cyrix_get_arr(i, &lbase, &lsize, &ltype);
+			if ((i == 3) && arr3_protected)
+				continue;
+			if (lsize == 0)
+				return i;
+		}
+		/* ARR0-ARR6 isn't free, try ARR7 but its size must be at least 256K */
+		cyrix_get_arr(i, &lbase, &lsize, &ltype);
+		if ((lsize == 0) && (size >= 0x40))
+			return i;
+	}
+	return -ENOSPC;
+}
+
+static u32 cr4 = 0;
+static u32 ccr3;
+
+static void prepare_set(void)
+{
+	u32 cr0;
+
+	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
+	if ( cpu_has_pge ) {
+		cr4 = read_cr4();
+		write_cr4(cr4 & (unsigned char) ~(1 << 7));
+	}
+
+	/*  Disable and flush caches. Note that wbinvd flushes the TLBs as
+	    a side-effect  */
+	cr0 = read_cr0() | 0x40000000;
+	wbinvd();
+	write_cr0(cr0);
+	wbinvd();
+
+	/* Cyrix ARRs - everything else were excluded at the top */
+	ccr3 = getCx86(CX86_CCR3);
+
+	/* Cyrix ARRs - everything else were excluded at the top */
+	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+
+}
+
+static void post_set(void)
+{
+	/*  Flush caches and TLBs  */
+	wbinvd();
+
+	/* Cyrix ARRs - everything else was excluded at the top */
+	setCx86(CX86_CCR3, ccr3);
+		
+	/*  Enable caches  */
+	write_cr0(read_cr0() & 0xbfffffff);
+
+	/*  Restore value of CR4  */
+	if ( cpu_has_pge )
+		write_cr4(cr4);
+}
+
+static void cyrix_set_arr(unsigned int reg, unsigned long base,
+			  unsigned long size, mtrr_type type)
+{
+	unsigned char arr, arr_type, arr_size;
+
+	arr = CX86_ARR_BASE + (reg << 1) + reg;	/* avoid multiplication by 3 */
+
+	/* count down from 32M (ARR0-ARR6) or from 2G (ARR7) */
+	if (reg >= 7)
+		size >>= 6;
+
+	size &= 0x7fff;		/* make sure arr_size <= 14 */
+	for (arr_size = 0; size; arr_size++, size >>= 1) ;
+
+	if (reg < 7) {
+		switch (type) {
+		case MTRR_TYPE_UNCACHABLE:
+			arr_type = 1;
+			break;
+		case MTRR_TYPE_WRCOMB:
+			arr_type = 9;
+			break;
+		case MTRR_TYPE_WRTHROUGH:
+			arr_type = 24;
+			break;
+		default:
+			arr_type = 8;
+			break;
+		}
+	} else {
+		switch (type) {
+		case MTRR_TYPE_UNCACHABLE:
+			arr_type = 0;
+			break;
+		case MTRR_TYPE_WRCOMB:
+			arr_type = 8;
+			break;
+		case MTRR_TYPE_WRTHROUGH:
+			arr_type = 25;
+			break;
+		default:
+			arr_type = 9;
+			break;
+		}
+	}
+
+	prepare_set();
+
+	base <<= PAGE_SHIFT;
+	setCx86(arr, ((unsigned char *) &base)[3]);
+	setCx86(arr + 1, ((unsigned char *) &base)[2]);
+	setCx86(arr + 2, (((unsigned char *) &base)[1]) | arr_size);
+	setCx86(CX86_RCR_BASE + reg, arr_type);
+
+	post_set();
+}
+
+typedef struct {
+	unsigned long base;
+	unsigned int size;
+	mtrr_type type;
+} arr_state_t;
+
+static arr_state_t arr_state[8] __initdata = {
+	{0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL},
+	{0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}
+};
+
+static unsigned char ccr_state[7] __initdata = { 0, 0, 0, 0, 0, 0, 0 };
+
+static void cyrix_set_all(void)
+{
+	int i;
+
+	prepare_set();
+
+	/* the CCRs are not contiguous */
+	for (i = 0; i < 4; i++)
+		setCx86(CX86_CCR0 + i, ccr_state[i]);
+	for (; i < 7; i++)
+		setCx86(CX86_CCR4 + i, ccr_state[i]);
+	for (i = 0; i < 8; i++)
+		cyrix_set_arr(i, arr_state[i].base, 
+			      arr_state[i].size, arr_state[i].type);
+
+	post_set();
+}
+
+#if 0
+/*
+ * On Cyrix 6x86(MX) and M II the ARR3 is special: it has connection
+ * with the SMM (System Management Mode) mode. So we need the following:
+ * Check whether SMI_LOCK (CCR3 bit 0) is set
+ *   if it is set, write a warning message: ARR3 cannot be changed!
+ *     (it cannot be changed until the next processor reset)
+ *   if it is reset, then we can change it, set all the needed bits:
+ *   - disable access to SMM memory through ARR3 range (CCR1 bit 7 reset)
+ *   - disable access to SMM memory (CCR1 bit 2 reset)
+ *   - disable SMM mode (CCR1 bit 1 reset)
+ *   - disable write protection of ARR3 (CCR6 bit 1 reset)
+ *   - (maybe) disable ARR3
+ * Just to be sure, we enable ARR usage by the processor (CCR5 bit 5 set)
+ */
+static void __init
+cyrix_arr_init(void)
+{
+	struct set_mtrr_context ctxt;
+	unsigned char ccr[7];
+	int ccrc[7] = { 0, 0, 0, 0, 0, 0, 0 };
+#ifdef CONFIG_SMP
+	int i;
+#endif
+
+	/* flush cache and enable MAPEN */
+	set_mtrr_prepare_save(&ctxt);
+	set_mtrr_cache_disable(&ctxt);
+
+	/* Save all CCRs locally */
+	ccr[0] = getCx86(CX86_CCR0);
+	ccr[1] = getCx86(CX86_CCR1);
+	ccr[2] = getCx86(CX86_CCR2);
+	ccr[3] = ctxt.ccr3;
+	ccr[4] = getCx86(CX86_CCR4);
+	ccr[5] = getCx86(CX86_CCR5);
+	ccr[6] = getCx86(CX86_CCR6);
+
+	if (ccr[3] & 1) {
+		ccrc[3] = 1;
+		arr3_protected = 1;
+	} else {
+		/* Disable SMM mode (bit 1), access to SMM memory (bit 2) and
+		 * access to SMM memory through ARR3 (bit 7).
+		 */
+		if (ccr[1] & 0x80) {
+			ccr[1] &= 0x7f;
+			ccrc[1] |= 0x80;
+		}
+		if (ccr[1] & 0x04) {
+			ccr[1] &= 0xfb;
+			ccrc[1] |= 0x04;
+		}
+		if (ccr[1] & 0x02) {
+			ccr[1] &= 0xfd;
+			ccrc[1] |= 0x02;
+		}
+		arr3_protected = 0;
+		if (ccr[6] & 0x02) {
+			ccr[6] &= 0xfd;
+			ccrc[6] = 1;	/* Disable write protection of ARR3 */
+			setCx86(CX86_CCR6, ccr[6]);
+		}
+		/* Disable ARR3. This is safe now that we disabled SMM. */
+		/* cyrix_set_arr_up (3, 0, 0, 0, FALSE); */
+	}
+	/* If we changed CCR1 in memory, change it in the processor, too. */
+	if (ccrc[1])
+		setCx86(CX86_CCR1, ccr[1]);
+
+	/* Enable ARR usage by the processor */
+	if (!(ccr[5] & 0x20)) {
+		ccr[5] |= 0x20;
+		ccrc[5] = 1;
+		setCx86(CX86_CCR5, ccr[5]);
+	}
+#ifdef CONFIG_SMP
+	for (i = 0; i < 7; i++)
+		ccr_state[i] = ccr[i];
+	for (i = 0; i < 8; i++)
+		cyrix_get_arr(i,
+			      &arr_state[i].base, &arr_state[i].size,
+			      &arr_state[i].type);
+#endif
+
+	set_mtrr_done(&ctxt);	/* flush cache and disable MAPEN */
+
+	if (ccrc[5])
+		printk(KERN_INFO "mtrr: ARR usage was not enabled, enabled manually\n");
+	if (ccrc[3])
+		printk(KERN_INFO "mtrr: ARR3 cannot be changed\n");
+/*
+    if ( ccrc[1] & 0x80) printk ("mtrr: SMM memory access through ARR3 disabled\n");
+    if ( ccrc[1] & 0x04) printk ("mtrr: SMM memory access disabled\n");
+    if ( ccrc[1] & 0x02) printk ("mtrr: SMM mode disabled\n");
+*/
+	if (ccrc[6])
+		printk(KERN_INFO "mtrr: ARR3 was write protected, unprotected\n");
+}
+#endif
+
+static struct mtrr_ops cyrix_mtrr_ops = {
+	.vendor            = X86_VENDOR_CYRIX,
+//	.init              = cyrix_arr_init,
+	.set_all	   = cyrix_set_all,
+	.set               = cyrix_set_arr,
+	.get               = cyrix_get_arr,
+	.get_free_region   = cyrix_get_free_region,
+	.validate_add_page = generic_validate_add_page,
+	.have_wrcomb       = positive_have_wrcomb,
+};
+
+int __init cyrix_init_mtrr(void)
+{
+	set_mtrr_ops(&cyrix_mtrr_ops);
+	return 0;
+}
+
+//arch_initcall(cyrix_init_mtrr);
diff --git a/arch/i386/kernel/cpu/mtrr/generic.c b/arch/i386/kernel/cpu/mtrr/generic.c
new file mode 100644
index 000000000000..a4cce454d09b
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/generic.c
@@ -0,0 +1,417 @@
+/* This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
+   because MTRRs can span upto 40 bits (36bits on most modern x86) */ 
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include <asm/system.h>
+#include <asm/cpufeature.h>
+#include <asm/tlbflush.h>
+#include "mtrr.h"
+
+struct mtrr_state {
+	struct mtrr_var_range *var_ranges;
+	mtrr_type fixed_ranges[NUM_FIXED_RANGES];
+	unsigned char enabled;
+	mtrr_type def_type;
+};
+
+static unsigned long smp_changes_mask;
+static struct mtrr_state mtrr_state = {};
+
+/*  Get the MSR pair relating to a var range  */
+static void __init
+get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
+{
+	rdmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
+	rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
+}
+
+static void __init
+get_fixed_ranges(mtrr_type * frs)
+{
+	unsigned int *p = (unsigned int *) frs;
+	int i;
+
+	rdmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+
+	for (i = 0; i < 2; i++)
+		rdmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2], p[3 + i * 2]);
+	for (i = 0; i < 8; i++)
+		rdmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2], p[7 + i * 2]);
+}
+
+/*  Grab all of the MTRR state for this CPU into *state  */
+void __init get_mtrr_state(void)
+{
+	unsigned int i;
+	struct mtrr_var_range *vrs;
+	unsigned lo, dummy;
+
+	if (!mtrr_state.var_ranges) {
+		mtrr_state.var_ranges = kmalloc(num_var_ranges * sizeof (struct mtrr_var_range), 
+						GFP_KERNEL);
+		if (!mtrr_state.var_ranges)
+			return;
+	} 
+	vrs = mtrr_state.var_ranges;
+
+	for (i = 0; i < num_var_ranges; i++)
+		get_mtrr_var_range(i, &vrs[i]);
+	get_fixed_ranges(mtrr_state.fixed_ranges);
+
+	rdmsr(MTRRdefType_MSR, lo, dummy);
+	mtrr_state.def_type = (lo & 0xff);
+	mtrr_state.enabled = (lo & 0xc00) >> 10;
+}
+
+/*  Free resources associated with a struct mtrr_state  */
+void __init finalize_mtrr_state(void)
+{
+	if (mtrr_state.var_ranges)
+		kfree(mtrr_state.var_ranges);
+	mtrr_state.var_ranges = NULL;
+}
+
+/*  Some BIOS's are fucked and don't set all MTRRs the same!  */
+void __init mtrr_state_warn(void)
+{
+	unsigned long mask = smp_changes_mask;
+
+	if (!mask)
+		return;
+	if (mask & MTRR_CHANGE_MASK_FIXED)
+		printk(KERN_WARNING "mtrr: your CPUs had inconsistent fixed MTRR settings\n");
+	if (mask & MTRR_CHANGE_MASK_VARIABLE)
+		printk(KERN_WARNING "mtrr: your CPUs had inconsistent variable MTRR settings\n");
+	if (mask & MTRR_CHANGE_MASK_DEFTYPE)
+		printk(KERN_WARNING "mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+	printk(KERN_INFO "mtrr: probably your BIOS does not setup all CPUs.\n");
+	printk(KERN_INFO "mtrr: corrected configuration.\n");
+}
+
+/* Doesn't attempt to pass an error out to MTRR users
+   because it's quite complicated in some cases and probably not
+   worth it because the best error handling is to ignore it. */
+void mtrr_wrmsr(unsigned msr, unsigned a, unsigned b)
+{
+	if (wrmsr_safe(msr, a, b) < 0)
+		printk(KERN_ERR
+			"MTRR: CPU %u: Writing MSR %x to %x:%x failed\n",
+			smp_processor_id(), msr, a, b);
+}
+
+int generic_get_free_region(unsigned long base, unsigned long size)
+/*  [SUMMARY] Get a free MTRR.
+    <base> The starting (base) address of the region.
+    <size> The size (in bytes) of the region.
+    [RETURNS] The index of the region on success, else -1 on error.
+*/
+{
+	int i, max;
+	mtrr_type ltype;
+	unsigned long lbase;
+	unsigned lsize;
+
+	max = num_var_ranges;
+	for (i = 0; i < max; ++i) {
+		mtrr_if->get(i, &lbase, &lsize, &ltype);
+		if (lsize == 0)
+			return i;
+	}
+	return -ENOSPC;
+}
+
+void generic_get_mtrr(unsigned int reg, unsigned long *base,
+		      unsigned int *size, mtrr_type * type)
+{
+	unsigned int mask_lo, mask_hi, base_lo, base_hi;
+
+	rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
+	if ((mask_lo & 0x800) == 0) {
+		/*  Invalid (i.e. free) range  */
+		*base = 0;
+		*size = 0;
+		*type = 0;
+		return;
+	}
+
+	rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi);
+
+	/* Work out the shifted address mask. */
+	mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT)
+	    | mask_lo >> PAGE_SHIFT;
+
+	/* This works correctly if size is a power of two, i.e. a
+	   contiguous range. */
+	*size = -mask_lo;
+	*base = base_hi << (32 - PAGE_SHIFT) | base_lo >> PAGE_SHIFT;
+	*type = base_lo & 0xff;
+}
+
+static int set_fixed_ranges(mtrr_type * frs)
+{
+	unsigned int *p = (unsigned int *) frs;
+	int changed = FALSE;
+	int i;
+	unsigned int lo, hi;
+
+	rdmsr(MTRRfix64K_00000_MSR, lo, hi);
+	if (p[0] != lo || p[1] != hi) {
+		mtrr_wrmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+		changed = TRUE;
+	}
+
+	for (i = 0; i < 2; i++) {
+		rdmsr(MTRRfix16K_80000_MSR + i, lo, hi);
+		if (p[2 + i * 2] != lo || p[3 + i * 2] != hi) {
+			mtrr_wrmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2],
+			      p[3 + i * 2]);
+			changed = TRUE;
+		}
+	}
+
+	for (i = 0; i < 8; i++) {
+		rdmsr(MTRRfix4K_C0000_MSR + i, lo, hi);
+		if (p[6 + i * 2] != lo || p[7 + i * 2] != hi) {
+			mtrr_wrmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2],
+			      p[7 + i * 2]);
+			changed = TRUE;
+		}
+	}
+	return changed;
+}
+
+/*  Set the MSR pair relating to a var range. Returns TRUE if
+    changes are made  */
+static int set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
+{
+	unsigned int lo, hi;
+	int changed = FALSE;
+
+	rdmsr(MTRRphysBase_MSR(index), lo, hi);
+	if ((vr->base_lo & 0xfffff0ffUL) != (lo & 0xfffff0ffUL)
+	    || (vr->base_hi & 0xfUL) != (hi & 0xfUL)) {
+		mtrr_wrmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
+		changed = TRUE;
+	}
+
+	rdmsr(MTRRphysMask_MSR(index), lo, hi);
+
+	if ((vr->mask_lo & 0xfffff800UL) != (lo & 0xfffff800UL)
+	    || (vr->mask_hi & 0xfUL) != (hi & 0xfUL)) {
+		mtrr_wrmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
+		changed = TRUE;
+	}
+	return changed;
+}
+
+static unsigned long set_mtrr_state(u32 deftype_lo, u32 deftype_hi)
+/*  [SUMMARY] Set the MTRR state for this CPU.
+    <state> The MTRR state information to read.
+    <ctxt> Some relevant CPU context.
+    [NOTE] The CPU must already be in a safe state for MTRR changes.
+    [RETURNS] 0 if no changes made, else a mask indication what was changed.
+*/
+{
+	unsigned int i;
+	unsigned long change_mask = 0;
+
+	for (i = 0; i < num_var_ranges; i++)
+		if (set_mtrr_var_ranges(i, &mtrr_state.var_ranges[i]))
+			change_mask |= MTRR_CHANGE_MASK_VARIABLE;
+
+	if (set_fixed_ranges(mtrr_state.fixed_ranges))
+		change_mask |= MTRR_CHANGE_MASK_FIXED;
+
+	/*  Set_mtrr_restore restores the old value of MTRRdefType,
+	   so to set it we fiddle with the saved value  */
+	if ((deftype_lo & 0xff) != mtrr_state.def_type
+	    || ((deftype_lo & 0xc00) >> 10) != mtrr_state.enabled) {
+		deftype_lo |= (mtrr_state.def_type | mtrr_state.enabled << 10);
+		change_mask |= MTRR_CHANGE_MASK_DEFTYPE;
+	}
+
+	return change_mask;
+}
+
+
+static unsigned long cr4 = 0;
+static u32 deftype_lo, deftype_hi;
+static DEFINE_SPINLOCK(set_atomicity_lock);
+
+/*
+ * Since we are disabling the cache don't allow any interrupts - they
+ * would run extremely slow and would only increase the pain.  The caller must
+ * ensure that local interrupts are disabled and are reenabled after post_set()
+ * has been called.
+ */
+
+static void prepare_set(void)
+{
+	unsigned long cr0;
+
+	/*  Note that this is not ideal, since the cache is only flushed/disabled
+	   for this CPU while the MTRRs are changed, but changing this requires
+	   more invasive changes to the way the kernel boots  */
+
+	spin_lock(&set_atomicity_lock);
+
+	/*  Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
+	cr0 = read_cr0() | 0x40000000;	/* set CD flag */
+	write_cr0(cr0);
+	wbinvd();
+
+	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
+	if ( cpu_has_pge ) {
+		cr4 = read_cr4();
+		write_cr4(cr4 & ~X86_CR4_PGE);
+	}
+
+	/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
+	__flush_tlb();
+
+	/*  Save MTRR state */
+	rdmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+
+	/*  Disable MTRRs, and set the default type to uncached  */
+	mtrr_wrmsr(MTRRdefType_MSR, deftype_lo & 0xf300UL, deftype_hi);
+}
+
+static void post_set(void)
+{
+	/*  Flush TLBs (no need to flush caches - they are disabled)  */
+	__flush_tlb();
+
+	/* Intel (P6) standard MTRRs */
+	mtrr_wrmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+		
+	/*  Enable caches  */
+	write_cr0(read_cr0() & 0xbfffffff);
+
+	/*  Restore value of CR4  */
+	if ( cpu_has_pge )
+		write_cr4(cr4);
+	spin_unlock(&set_atomicity_lock);
+}
+
+static void generic_set_all(void)
+{
+	unsigned long mask, count;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	prepare_set();
+
+	/* Actually set the state */
+	mask = set_mtrr_state(deftype_lo,deftype_hi);
+
+	post_set();
+	local_irq_restore(flags);
+
+	/*  Use the atomic bitops to update the global mask  */
+	for (count = 0; count < sizeof mask * 8; ++count) {
+		if (mask & 0x01)
+			set_bit(count, &smp_changes_mask);
+		mask >>= 1;
+	}
+	
+}
+
+static void generic_set_mtrr(unsigned int reg, unsigned long base,
+			     unsigned long size, mtrr_type type)
+/*  [SUMMARY] Set variable MTRR register on the local CPU.
+    <reg> The register to set.
+    <base> The base address of the region.
+    <size> The size of the region. If this is 0 the region is disabled.
+    <type> The type of the region.
+    <do_safe> If TRUE, do the change safely. If FALSE, safety measures should
+    be done externally.
+    [RETURNS] Nothing.
+*/
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	prepare_set();
+
+	if (size == 0) {
+		/* The invalid bit is kept in the mask, so we simply clear the
+		   relevant mask register to disable a range. */
+		mtrr_wrmsr(MTRRphysMask_MSR(reg), 0, 0);
+	} else {
+		mtrr_wrmsr(MTRRphysBase_MSR(reg), base << PAGE_SHIFT | type,
+		      (base & size_and_mask) >> (32 - PAGE_SHIFT));
+		mtrr_wrmsr(MTRRphysMask_MSR(reg), -size << PAGE_SHIFT | 0x800,
+		      (-size & size_and_mask) >> (32 - PAGE_SHIFT));
+	}
+
+	post_set();
+	local_irq_restore(flags);
+}
+
+int generic_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+{
+	unsigned long lbase, last;
+
+	/*  For Intel PPro stepping <= 7, must be 4 MiB aligned 
+	    and not touch 0x70000000->0x7003FFFF */
+	if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 &&
+	    boot_cpu_data.x86_model == 1 &&
+	    boot_cpu_data.x86_mask <= 7) {
+		if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
+			printk(KERN_WARNING "mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
+			return -EINVAL;
+		}
+		if (!(base + size < 0x70000000 || base > 0x7003FFFF) &&
+		    (type == MTRR_TYPE_WRCOMB
+		     || type == MTRR_TYPE_WRBACK)) {
+			printk(KERN_WARNING "mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
+			return -EINVAL;
+		}
+	}
+
+	if (base + size < 0x100) {
+		printk(KERN_WARNING "mtrr: cannot set region below 1 MiB (0x%lx000,0x%lx000)\n",
+		       base, size);
+		return -EINVAL;
+	}
+	/*  Check upper bits of base and last are equal and lower bits are 0
+	    for base and 1 for last  */
+	last = base + size - 1;
+	for (lbase = base; !(lbase & 1) && (last & 1);
+	     lbase = lbase >> 1, last = last >> 1) ;
+	if (lbase != last) {
+		printk(KERN_WARNING "mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n",
+		       base, size);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+static int generic_have_wrcomb(void)
+{
+	unsigned long config, dummy;
+	rdmsr(MTRRcap_MSR, config, dummy);
+	return (config & (1 << 10));
+}
+
+int positive_have_wrcomb(void)
+{
+	return 1;
+}
+
+/* generic structure...
+ */
+struct mtrr_ops generic_mtrr_ops = {
+	.use_intel_if      = 1,
+	.set_all	   = generic_set_all,
+	.get               = generic_get_mtrr,
+	.get_free_region   = generic_get_free_region,
+	.set               = generic_set_mtrr,
+	.validate_add_page = generic_validate_add_page,
+	.have_wrcomb       = generic_have_wrcomb,
+};
diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c
new file mode 100644
index 000000000000..1923e0aed26a
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/if.c
@@ -0,0 +1,374 @@
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <asm/uaccess.h>
+
+#define LINE_SIZE 80
+
+#include <asm/mtrr.h>
+#include "mtrr.h"
+
+/* RED-PEN: this is accessed without any locking */
+extern unsigned int *usage_table;
+
+
+#define FILE_FCOUNT(f) (((struct seq_file *)((f)->private_data))->private)
+
+static char *mtrr_strings[MTRR_NUM_TYPES] =
+{
+    "uncachable",               /* 0 */
+    "write-combining",          /* 1 */
+    "?",                        /* 2 */
+    "?",                        /* 3 */
+    "write-through",            /* 4 */
+    "write-protect",            /* 5 */
+    "write-back",               /* 6 */
+};
+
+char *mtrr_attrib_to_str(int x)
+{
+	return (x <= 6) ? mtrr_strings[x] : "?";
+}
+
+#ifdef CONFIG_PROC_FS
+
+static int
+mtrr_file_add(unsigned long base, unsigned long size,
+	      unsigned int type, char increment, struct file *file, int page)
+{
+	int reg, max;
+	unsigned int *fcount = FILE_FCOUNT(file); 
+
+	max = num_var_ranges;
+	if (fcount == NULL) {
+		fcount = kmalloc(max * sizeof *fcount, GFP_KERNEL);
+		if (!fcount)
+			return -ENOMEM;
+		memset(fcount, 0, max * sizeof *fcount);
+		FILE_FCOUNT(file) = fcount;
+	}
+	if (!page) {
+		if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1)))
+			return -EINVAL;
+		base >>= PAGE_SHIFT;
+		size >>= PAGE_SHIFT;
+	}
+	reg = mtrr_add_page(base, size, type, 1);
+	if (reg >= 0)
+		++fcount[reg];
+	return reg;
+}
+
+static int
+mtrr_file_del(unsigned long base, unsigned long size,
+	      struct file *file, int page)
+{
+	int reg;
+	unsigned int *fcount = FILE_FCOUNT(file);
+
+	if (!page) {
+		if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1)))
+			return -EINVAL;
+		base >>= PAGE_SHIFT;
+		size >>= PAGE_SHIFT;
+	}
+	reg = mtrr_del_page(-1, base, size);
+	if (reg < 0)
+		return reg;
+	if (fcount == NULL)
+		return reg;
+	if (fcount[reg] < 1)
+		return -EINVAL;
+	--fcount[reg];
+	return reg;
+}
+
+/* RED-PEN: seq_file can seek now. this is ignored. */
+static ssize_t
+mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
+/*  Format of control line:
+    "base=%Lx size=%Lx type=%s"     OR:
+    "disable=%d"
+*/
+{
+	int i, err;
+	unsigned long reg;
+	unsigned long long base, size;
+	char *ptr;
+	char line[LINE_SIZE];
+	size_t linelen;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	if (!len)
+		return -EINVAL;
+	memset(line, 0, LINE_SIZE);
+	if (len > LINE_SIZE)
+		len = LINE_SIZE;
+	if (copy_from_user(line, buf, len - 1))
+		return -EFAULT;
+	linelen = strlen(line);
+	ptr = line + linelen - 1;
+	if (linelen && *ptr == '\n')
+		*ptr = '\0';
+	if (!strncmp(line, "disable=", 8)) {
+		reg = simple_strtoul(line + 8, &ptr, 0);
+		err = mtrr_del_page(reg, 0, 0);
+		if (err < 0)
+			return err;
+		return len;
+	}
+	if (strncmp(line, "base=", 5))
+		return -EINVAL;
+	base = simple_strtoull(line + 5, &ptr, 0);
+	for (; isspace(*ptr); ++ptr) ;
+	if (strncmp(ptr, "size=", 5))
+		return -EINVAL;
+	size = simple_strtoull(ptr + 5, &ptr, 0);
+	if ((base & 0xfff) || (size & 0xfff))
+		return -EINVAL;
+	for (; isspace(*ptr); ++ptr) ;
+	if (strncmp(ptr, "type=", 5))
+		return -EINVAL;
+	ptr += 5;
+	for (; isspace(*ptr); ++ptr) ;
+	for (i = 0; i < MTRR_NUM_TYPES; ++i) {
+		if (strcmp(ptr, mtrr_strings[i]))
+			continue;
+		base >>= PAGE_SHIFT;
+		size >>= PAGE_SHIFT;
+		err =
+		    mtrr_add_page((unsigned long) base, (unsigned long) size, i,
+				  1);
+		if (err < 0)
+			return err;
+		return len;
+	}
+	return -EINVAL;
+}
+
+static int
+mtrr_ioctl(struct inode *inode, struct file *file,
+	   unsigned int cmd, unsigned long __arg)
+{
+	int err;
+	mtrr_type type;
+	struct mtrr_sentry sentry;
+	struct mtrr_gentry gentry;
+	void __user *arg = (void __user *) __arg;
+
+	switch (cmd) {
+	default:
+		return -ENOTTY;
+	case MTRRIOC_ADD_ENTRY:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		err =
+		    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
+				  file, 0);
+		if (err < 0)
+			return err;
+		break;
+	case MTRRIOC_SET_ENTRY:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		err = mtrr_add(sentry.base, sentry.size, sentry.type, 0);
+		if (err < 0)
+			return err;
+		break;
+	case MTRRIOC_DEL_ENTRY:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		err = mtrr_file_del(sentry.base, sentry.size, file, 0);
+		if (err < 0)
+			return err;
+		break;
+	case MTRRIOC_KILL_ENTRY:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		err = mtrr_del(-1, sentry.base, sentry.size);
+		if (err < 0)
+			return err;
+		break;
+	case MTRRIOC_GET_ENTRY:
+		if (copy_from_user(&gentry, arg, sizeof gentry))
+			return -EFAULT;
+		if (gentry.regnum >= num_var_ranges)
+			return -EINVAL;
+		mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
+
+		/* Hide entries that go above 4GB */
+		if (gentry.base + gentry.size > 0x100000
+		    || gentry.size == 0x100000)
+			gentry.base = gentry.size = gentry.type = 0;
+		else {
+			gentry.base <<= PAGE_SHIFT;
+			gentry.size <<= PAGE_SHIFT;
+			gentry.type = type;
+		}
+
+		if (copy_to_user(arg, &gentry, sizeof gentry))
+			return -EFAULT;
+		break;
+	case MTRRIOC_ADD_PAGE_ENTRY:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		err =
+		    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
+				  file, 1);
+		if (err < 0)
+			return err;
+		break;
+	case MTRRIOC_SET_PAGE_ENTRY:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0);
+		if (err < 0)
+			return err;
+		break;
+	case MTRRIOC_DEL_PAGE_ENTRY:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		err = mtrr_file_del(sentry.base, sentry.size, file, 1);
+		if (err < 0)
+			return err;
+		break;
+	case MTRRIOC_KILL_PAGE_ENTRY:
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		err = mtrr_del_page(-1, sentry.base, sentry.size);
+		if (err < 0)
+			return err;
+		break;
+	case MTRRIOC_GET_PAGE_ENTRY:
+		if (copy_from_user(&gentry, arg, sizeof gentry))
+			return -EFAULT;
+		if (gentry.regnum >= num_var_ranges)
+			return -EINVAL;
+		mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
+		gentry.type = type;
+
+		if (copy_to_user(arg, &gentry, sizeof gentry))
+			return -EFAULT;
+		break;
+	}
+	return 0;
+}
+
+static int
+mtrr_close(struct inode *ino, struct file *file)
+{
+	int i, max;
+	unsigned int *fcount = FILE_FCOUNT(file);
+
+	if (fcount != NULL) {
+		max = num_var_ranges;
+		for (i = 0; i < max; ++i) {
+			while (fcount[i] > 0) {
+				mtrr_del(i, 0, 0);
+				--fcount[i];
+			}
+		}
+		kfree(fcount);
+		FILE_FCOUNT(file) = NULL;
+	}
+	return single_release(ino, file);
+}
+
+static int mtrr_seq_show(struct seq_file *seq, void *offset);
+
+static int mtrr_open(struct inode *inode, struct file *file)
+{
+	if (!mtrr_if) 
+		return -EIO;
+	if (!mtrr_if->get) 
+		return -ENXIO; 
+	return single_open(file, mtrr_seq_show, NULL);
+}
+
+static struct file_operations mtrr_fops = {
+	.owner   = THIS_MODULE,
+	.open	 = mtrr_open, 
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.write   = mtrr_write,
+	.ioctl   = mtrr_ioctl,
+	.release = mtrr_close,
+};
+
+
+static struct proc_dir_entry *proc_root_mtrr;
+
+
+static int mtrr_seq_show(struct seq_file *seq, void *offset)
+{
+	char factor;
+	int i, max, len;
+	mtrr_type type;
+	unsigned long base;
+	unsigned int size;
+
+	len = 0;
+	max = num_var_ranges;
+	for (i = 0; i < max; i++) {
+		mtrr_if->get(i, &base, &size, &type);
+		if (size == 0)
+			usage_table[i] = 0;
+		else {
+			if (size < (0x100000 >> PAGE_SHIFT)) {
+				/* less than 1MB */
+				factor = 'K';
+				size <<= PAGE_SHIFT - 10;
+			} else {
+				factor = 'M';
+				size >>= 20 - PAGE_SHIFT;
+			}
+			/* RED-PEN: base can be > 32bit */ 
+			len += seq_printf(seq, 
+				   "reg%02i: base=0x%05lx000 (%4liMB), size=%4i%cB: %s, count=%d\n",
+			     i, base, base >> (20 - PAGE_SHIFT), size, factor,
+			     mtrr_attrib_to_str(type), usage_table[i]);
+		}
+	}
+	return 0;
+}
+
+static int __init mtrr_if_init(void)
+{
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	if ((!cpu_has(c, X86_FEATURE_MTRR)) &&
+	    (!cpu_has(c, X86_FEATURE_K6_MTRR)) &&
+	    (!cpu_has(c, X86_FEATURE_CYRIX_ARR)) &&
+	    (!cpu_has(c, X86_FEATURE_CENTAUR_MCR)))
+		return -ENODEV;
+
+	proc_root_mtrr =
+	    create_proc_entry("mtrr", S_IWUSR | S_IRUGO, &proc_root);
+	if (proc_root_mtrr) {
+		proc_root_mtrr->owner = THIS_MODULE;
+		proc_root_mtrr->proc_fops = &mtrr_fops;
+	}
+	return 0;
+}
+
+arch_initcall(mtrr_if_init);
+#endif			/*  CONFIG_PROC_FS  */
diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c
new file mode 100644
index 000000000000..8f67b490a7fd
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/main.c
@@ -0,0 +1,693 @@
+/*  Generic MTRR (Memory Type Range Register) driver.
+
+    Copyright (C) 1997-2000  Richard Gooch
+    Copyright (c) 2002	     Patrick Mochel
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Library General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Library General Public License for more details.
+
+    You should have received a copy of the GNU Library General Public
+    License along with this library; if not, write to the Free
+    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
+    The postal address is:
+      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+
+    Source: "Pentium Pro Family Developer's Manual, Volume 3:
+    Operating System Writer's Guide" (Intel document number 242692),
+    section 11.11.7
+
+    This was cleaned and made readable by Patrick Mochel <mochel@osdl.org> 
+    on 6-7 March 2002. 
+    Source: Intel Architecture Software Developers Manual, Volume 3: 
+    System Programming Guide; Section 9.11. (1997 edition - PPro).
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+
+#include <asm/mtrr.h>
+
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include "mtrr.h"
+
+#define MTRR_VERSION            "2.0 (20020519)"
+
+u32 num_var_ranges = 0;
+
+unsigned int *usage_table;
+static DECLARE_MUTEX(main_lock);
+
+u32 size_or_mask, size_and_mask;
+
+static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {};
+
+struct mtrr_ops * mtrr_if = NULL;
+
+static void set_mtrr(unsigned int reg, unsigned long base,
+		     unsigned long size, mtrr_type type);
+
+extern int arr3_protected;
+
+void set_mtrr_ops(struct mtrr_ops * ops)
+{
+	if (ops->vendor && ops->vendor < X86_VENDOR_NUM)
+		mtrr_ops[ops->vendor] = ops;
+}
+
+/*  Returns non-zero if we have the write-combining memory type  */
+static int have_wrcomb(void)
+{
+	struct pci_dev *dev;
+	
+	if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) != NULL) {
+		/* ServerWorks LE chipsets have problems with write-combining 
+		   Don't allow it and leave room for other chipsets to be tagged */
+		if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
+		    dev->device == PCI_DEVICE_ID_SERVERWORKS_LE) {
+			printk(KERN_INFO "mtrr: Serverworks LE detected. Write-combining disabled.\n");
+			pci_dev_put(dev);
+			return 0;
+		}
+		/* Intel 450NX errata # 23. Non ascending cachline evictions to
+		   write combining memory may resulting in data corruption */
+		if (dev->vendor == PCI_VENDOR_ID_INTEL &&
+		    dev->device == PCI_DEVICE_ID_INTEL_82451NX) {
+			printk(KERN_INFO "mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
+			pci_dev_put(dev);
+			return 0;
+		}
+		pci_dev_put(dev);
+	}		
+	return (mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0);
+}
+
+/*  This function returns the number of variable MTRRs  */
+static void __init set_num_var_ranges(void)
+{
+	unsigned long config = 0, dummy;
+
+	if (use_intel()) {
+		rdmsr(MTRRcap_MSR, config, dummy);
+	} else if (is_cpu(AMD))
+		config = 2;
+	else if (is_cpu(CYRIX) || is_cpu(CENTAUR))
+		config = 8;
+	num_var_ranges = config & 0xff;
+}
+
+static void __init init_table(void)
+{
+	int i, max;
+
+	max = num_var_ranges;
+	if ((usage_table = kmalloc(max * sizeof *usage_table, GFP_KERNEL))
+	    == NULL) {
+		printk(KERN_ERR "mtrr: could not allocate\n");
+		return;
+	}
+	for (i = 0; i < max; i++)
+		usage_table[i] = 1;
+}
+
+struct set_mtrr_data {
+	atomic_t	count;
+	atomic_t	gate;
+	unsigned long	smp_base;
+	unsigned long	smp_size;
+	unsigned int	smp_reg;
+	mtrr_type	smp_type;
+};
+
+#ifdef CONFIG_SMP
+
+static void ipi_handler(void *info)
+/*  [SUMMARY] Synchronisation handler. Executed by "other" CPUs.
+    [RETURNS] Nothing.
+*/
+{
+	struct set_mtrr_data *data = info;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	atomic_dec(&data->count);
+	while(!atomic_read(&data->gate))
+		cpu_relax();
+
+	/*  The master has cleared me to execute  */
+	if (data->smp_reg != ~0U) 
+		mtrr_if->set(data->smp_reg, data->smp_base, 
+			     data->smp_size, data->smp_type);
+	else
+		mtrr_if->set_all();
+
+	atomic_dec(&data->count);
+	while(atomic_read(&data->gate))
+		cpu_relax();
+
+	atomic_dec(&data->count);
+	local_irq_restore(flags);
+}
+
+#endif
+
+/**
+ * set_mtrr - update mtrrs on all processors
+ * @reg:	mtrr in question
+ * @base:	mtrr base
+ * @size:	mtrr size
+ * @type:	mtrr type
+ *
+ * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly:
+ * 
+ * 1. Send IPI to do the following:
+ * 2. Disable Interrupts
+ * 3. Wait for all procs to do so 
+ * 4. Enter no-fill cache mode
+ * 5. Flush caches
+ * 6. Clear PGE bit
+ * 7. Flush all TLBs
+ * 8. Disable all range registers
+ * 9. Update the MTRRs
+ * 10. Enable all range registers
+ * 11. Flush all TLBs and caches again
+ * 12. Enter normal cache mode and reenable caching
+ * 13. Set PGE 
+ * 14. Wait for buddies to catch up
+ * 15. Enable interrupts.
+ * 
+ * What does that mean for us? Well, first we set data.count to the number
+ * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait
+ * until it hits 0 and proceed. We set the data.gate flag and reset data.count.
+ * Meanwhile, they are waiting for that flag to be set. Once it's set, each 
+ * CPU goes through the transition of updating MTRRs. The CPU vendors may each do it 
+ * differently, so we call mtrr_if->set() callback and let them take care of it.
+ * When they're done, they again decrement data->count and wait for data.gate to 
+ * be reset. 
+ * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag.
+ * Everyone then enables interrupts and we all continue on.
+ *
+ * Note that the mechanism is the same for UP systems, too; all the SMP stuff
+ * becomes nops.
+ */
+static void set_mtrr(unsigned int reg, unsigned long base,
+		     unsigned long size, mtrr_type type)
+{
+	struct set_mtrr_data data;
+	unsigned long flags;
+
+	data.smp_reg = reg;
+	data.smp_base = base;
+	data.smp_size = size;
+	data.smp_type = type;
+	atomic_set(&data.count, num_booting_cpus() - 1);
+	atomic_set(&data.gate,0);
+
+	/*  Start the ball rolling on other CPUs  */
+	if (smp_call_function(ipi_handler, &data, 1, 0) != 0)
+		panic("mtrr: timed out waiting for other CPUs\n");
+
+	local_irq_save(flags);
+
+	while(atomic_read(&data.count))
+		cpu_relax();
+
+	/* ok, reset count and toggle gate */
+	atomic_set(&data.count, num_booting_cpus() - 1);
+	atomic_set(&data.gate,1);
+
+	/* do our MTRR business */
+
+	/* HACK!
+	 * We use this same function to initialize the mtrrs on boot.
+	 * The state of the boot cpu's mtrrs has been saved, and we want
+	 * to replicate across all the APs. 
+	 * If we're doing that @reg is set to something special...
+	 */
+	if (reg != ~0U) 
+		mtrr_if->set(reg,base,size,type);
+
+	/* wait for the others */
+	while(atomic_read(&data.count))
+		cpu_relax();
+
+	atomic_set(&data.count, num_booting_cpus() - 1);
+	atomic_set(&data.gate,0);
+
+	/*
+	 * Wait here for everyone to have seen the gate change
+	 * So we're the last ones to touch 'data'
+	 */
+	while(atomic_read(&data.count))
+		cpu_relax();
+
+	local_irq_restore(flags);
+}
+
+/**
+ *	mtrr_add_page - Add a memory type region
+ *	@base: Physical base address of region in pages (4 KB)
+ *	@size: Physical size of region in pages (4 KB)
+ *	@type: Type of MTRR desired
+ *	@increment: If this is true do usage counting on the region
+ *
+ *	Memory type region registers control the caching on newer Intel and
+ *	non Intel processors. This function allows drivers to request an
+ *	MTRR is added. The details and hardware specifics of each processor's
+ *	implementation are hidden from the caller, but nevertheless the 
+ *	caller should expect to need to provide a power of two size on an
+ *	equivalent power of two boundary.
+ *
+ *	If the region cannot be added either because all regions are in use
+ *	or the CPU cannot support it a negative value is returned. On success
+ *	the register number for this entry is returned, but should be treated
+ *	as a cookie only.
+ *
+ *	On a multiprocessor machine the changes are made to all processors.
+ *	This is required on x86 by the Intel processors.
+ *
+ *	The available types are
+ *
+ *	%MTRR_TYPE_UNCACHABLE	-	No caching
+ *
+ *	%MTRR_TYPE_WRBACK	-	Write data back in bursts whenever
+ *
+ *	%MTRR_TYPE_WRCOMB	-	Write data back soon but allow bursts
+ *
+ *	%MTRR_TYPE_WRTHROUGH	-	Cache reads but not writes
+ *
+ *	BUGS: Needs a quiet flag for the cases where drivers do not mind
+ *	failures and do not wish system log messages to be sent.
+ */
+
+int mtrr_add_page(unsigned long base, unsigned long size, 
+		  unsigned int type, char increment)
+{
+	int i;
+	mtrr_type ltype;
+	unsigned long lbase;
+	unsigned int lsize;
+	int error;
+
+	if (!mtrr_if)
+		return -ENXIO;
+		
+	if ((error = mtrr_if->validate_add_page(base,size,type)))
+		return error;
+
+	if (type >= MTRR_NUM_TYPES) {
+		printk(KERN_WARNING "mtrr: type: %u invalid\n", type);
+		return -EINVAL;
+	}
+
+	/*  If the type is WC, check that this processor supports it  */
+	if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
+		printk(KERN_WARNING
+		       "mtrr: your processor doesn't support write-combining\n");
+		return -ENOSYS;
+	}
+
+	if (base & size_or_mask || size & size_or_mask) {
+		printk(KERN_WARNING "mtrr: base or size exceeds the MTRR width\n");
+		return -EINVAL;
+	}
+
+	error = -EINVAL;
+
+	/*  Search for existing MTRR  */
+	down(&main_lock);
+	for (i = 0; i < num_var_ranges; ++i) {
+		mtrr_if->get(i, &lbase, &lsize, &ltype);
+		if (base >= lbase + lsize)
+			continue;
+		if ((base < lbase) && (base + size <= lbase))
+			continue;
+		/*  At this point we know there is some kind of overlap/enclosure  */
+		if ((base < lbase) || (base + size > lbase + lsize)) {
+			printk(KERN_WARNING
+			       "mtrr: 0x%lx000,0x%lx000 overlaps existing"
+			       " 0x%lx000,0x%x000\n", base, size, lbase,
+			       lsize);
+			goto out;
+		}
+		/*  New region is enclosed by an existing region  */
+		if (ltype != type) {
+			if (type == MTRR_TYPE_UNCACHABLE)
+				continue;
+			printk (KERN_WARNING "mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+			     base, size, mtrr_attrib_to_str(ltype),
+			     mtrr_attrib_to_str(type));
+			goto out;
+		}
+		if (increment)
+			++usage_table[i];
+		error = i;
+		goto out;
+	}
+	/*  Search for an empty MTRR  */
+	i = mtrr_if->get_free_region(base, size);
+	if (i >= 0) {
+		set_mtrr(i, base, size, type);
+		usage_table[i] = 1;
+	} else
+		printk(KERN_INFO "mtrr: no more MTRRs available\n");
+	error = i;
+ out:
+	up(&main_lock);
+	return error;
+}
+
+/**
+ *	mtrr_add - Add a memory type region
+ *	@base: Physical base address of region
+ *	@size: Physical size of region
+ *	@type: Type of MTRR desired
+ *	@increment: If this is true do usage counting on the region
+ *
+ *	Memory type region registers control the caching on newer Intel and
+ *	non Intel processors. This function allows drivers to request an
+ *	MTRR is added. The details and hardware specifics of each processor's
+ *	implementation are hidden from the caller, but nevertheless the 
+ *	caller should expect to need to provide a power of two size on an
+ *	equivalent power of two boundary.
+ *
+ *	If the region cannot be added either because all regions are in use
+ *	or the CPU cannot support it a negative value is returned. On success
+ *	the register number for this entry is returned, but should be treated
+ *	as a cookie only.
+ *
+ *	On a multiprocessor machine the changes are made to all processors.
+ *	This is required on x86 by the Intel processors.
+ *
+ *	The available types are
+ *
+ *	%MTRR_TYPE_UNCACHABLE	-	No caching
+ *
+ *	%MTRR_TYPE_WRBACK	-	Write data back in bursts whenever
+ *
+ *	%MTRR_TYPE_WRCOMB	-	Write data back soon but allow bursts
+ *
+ *	%MTRR_TYPE_WRTHROUGH	-	Cache reads but not writes
+ *
+ *	BUGS: Needs a quiet flag for the cases where drivers do not mind
+ *	failures and do not wish system log messages to be sent.
+ */
+
+int
+mtrr_add(unsigned long base, unsigned long size, unsigned int type,
+	 char increment)
+{
+	if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
+		printk(KERN_WARNING "mtrr: size and base must be multiples of 4 kiB\n");
+		printk(KERN_DEBUG "mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
+		return -EINVAL;
+	}
+	return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
+			     increment);
+}
+
+/**
+ *	mtrr_del_page - delete a memory type region
+ *	@reg: Register returned by mtrr_add
+ *	@base: Physical base address
+ *	@size: Size of region
+ *
+ *	If register is supplied then base and size are ignored. This is
+ *	how drivers should call it.
+ *
+ *	Releases an MTRR region. If the usage count drops to zero the 
+ *	register is freed and the region returns to default state.
+ *	On success the register is returned, on failure a negative error
+ *	code.
+ */
+
+int mtrr_del_page(int reg, unsigned long base, unsigned long size)
+{
+	int i, max;
+	mtrr_type ltype;
+	unsigned long lbase;
+	unsigned int lsize;
+	int error = -EINVAL;
+
+	if (!mtrr_if)
+		return -ENXIO;
+
+	max = num_var_ranges;
+	down(&main_lock);
+	if (reg < 0) {
+		/*  Search for existing MTRR  */
+		for (i = 0; i < max; ++i) {
+			mtrr_if->get(i, &lbase, &lsize, &ltype);
+			if (lbase == base && lsize == size) {
+				reg = i;
+				break;
+			}
+		}
+		if (reg < 0) {
+			printk(KERN_DEBUG "mtrr: no MTRR for %lx000,%lx000 found\n", base,
+			       size);
+			goto out;
+		}
+	}
+	if (reg >= max) {
+		printk(KERN_WARNING "mtrr: register: %d too big\n", reg);
+		goto out;
+	}
+	if (is_cpu(CYRIX) && !use_intel()) {
+		if ((reg == 3) && arr3_protected) {
+			printk(KERN_WARNING "mtrr: ARR3 cannot be changed\n");
+			goto out;
+		}
+	}
+	mtrr_if->get(reg, &lbase, &lsize, &ltype);
+	if (lsize < 1) {
+		printk(KERN_WARNING "mtrr: MTRR %d not used\n", reg);
+		goto out;
+	}
+	if (usage_table[reg] < 1) {
+		printk(KERN_WARNING "mtrr: reg: %d has count=0\n", reg);
+		goto out;
+	}
+	if (--usage_table[reg] < 1)
+		set_mtrr(reg, 0, 0, 0);
+	error = reg;
+ out:
+	up(&main_lock);
+	return error;
+}
+/**
+ *	mtrr_del - delete a memory type region
+ *	@reg: Register returned by mtrr_add
+ *	@base: Physical base address
+ *	@size: Size of region
+ *
+ *	If register is supplied then base and size are ignored. This is
+ *	how drivers should call it.
+ *
+ *	Releases an MTRR region. If the usage count drops to zero the 
+ *	register is freed and the region returns to default state.
+ *	On success the register is returned, on failure a negative error
+ *	code.
+ */
+
+int
+mtrr_del(int reg, unsigned long base, unsigned long size)
+{
+	if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
+		printk(KERN_INFO "mtrr: size and base must be multiples of 4 kiB\n");
+		printk(KERN_DEBUG "mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
+		return -EINVAL;
+	}
+	return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
+}
+
+EXPORT_SYMBOL(mtrr_add);
+EXPORT_SYMBOL(mtrr_del);
+
+/* HACK ALERT!
+ * These should be called implicitly, but we can't yet until all the initcall
+ * stuff is done...
+ */
+extern void amd_init_mtrr(void);
+extern void cyrix_init_mtrr(void);
+extern void centaur_init_mtrr(void);
+
+static void __init init_ifs(void)
+{
+	amd_init_mtrr();
+	cyrix_init_mtrr();
+	centaur_init_mtrr();
+}
+
+static void __init init_other_cpus(void)
+{
+	if (use_intel())
+		get_mtrr_state();
+
+	/* bring up the other processors */
+	set_mtrr(~0U,0,0,0);
+
+	if (use_intel()) {
+		finalize_mtrr_state();
+		mtrr_state_warn();
+	}
+}
+
+
+struct mtrr_value {
+	mtrr_type	ltype;
+	unsigned long	lbase;
+	unsigned int	lsize;
+};
+
+static struct mtrr_value * mtrr_state;
+
+static int mtrr_save(struct sys_device * sysdev, u32 state)
+{
+	int i;
+	int size = num_var_ranges * sizeof(struct mtrr_value);
+
+	mtrr_state = kmalloc(size,GFP_ATOMIC);
+	if (mtrr_state)
+		memset(mtrr_state,0,size);
+	else
+		return -ENOMEM;
+
+	for (i = 0; i < num_var_ranges; i++) {
+		mtrr_if->get(i,
+			     &mtrr_state[i].lbase,
+			     &mtrr_state[i].lsize,
+			     &mtrr_state[i].ltype);
+	}
+	return 0;
+}
+
+static int mtrr_restore(struct sys_device * sysdev)
+{
+	int i;
+
+	for (i = 0; i < num_var_ranges; i++) {
+		if (mtrr_state[i].lsize) 
+			set_mtrr(i,
+				 mtrr_state[i].lbase,
+				 mtrr_state[i].lsize,
+				 mtrr_state[i].ltype);
+	}
+	kfree(mtrr_state);
+	return 0;
+}
+
+
+
+static struct sysdev_driver mtrr_sysdev_driver = {
+	.suspend	= mtrr_save,
+	.resume		= mtrr_restore,
+};
+
+
+/**
+ * mtrr_init - initialize mtrrs on the boot CPU
+ *
+ * This needs to be called early; before any of the other CPUs are 
+ * initialized (i.e. before smp_init()).
+ * 
+ */
+static int __init mtrr_init(void)
+{
+	init_ifs();
+
+	if (cpu_has_mtrr) {
+		mtrr_if = &generic_mtrr_ops;
+		size_or_mask = 0xff000000;	/* 36 bits */
+		size_and_mask = 0x00f00000;
+			
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_AMD:
+			/* The original Athlon docs said that
+			   total addressable memory is 44 bits wide.
+			   It was not really clear whether its MTRRs
+			   follow this or not. (Read: 44 or 36 bits).
+			   However, "x86-64_overview.pdf" explicitly
+			   states that "previous implementations support
+			   36 bit MTRRs" and also provides a way to
+			   query the width (in bits) of the physical
+			   addressable memory on the Hammer family.
+			 */
+			if (boot_cpu_data.x86 == 15
+			    && (cpuid_eax(0x80000000) >= 0x80000008)) {
+				u32 phys_addr;
+				phys_addr = cpuid_eax(0x80000008) & 0xff;
+				size_or_mask =
+				    ~((1 << (phys_addr - PAGE_SHIFT)) - 1);
+				size_and_mask = ~size_or_mask & 0xfff00000;
+			}
+			/* Athlon MTRRs use an Intel-compatible interface for 
+			 * getting and setting */
+			break;
+		case X86_VENDOR_CENTAUR:
+			if (boot_cpu_data.x86 == 6) {
+				/* VIA Cyrix family have Intel style MTRRs, but don't support PAE */
+				size_or_mask = 0xfff00000;	/* 32 bits */
+				size_and_mask = 0;
+			}
+			break;
+		
+		default:
+			break;
+		}
+	} else {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_AMD:
+			if (cpu_has_k6_mtrr) {
+				/* Pre-Athlon (K6) AMD CPU MTRRs */
+				mtrr_if = mtrr_ops[X86_VENDOR_AMD];
+				size_or_mask = 0xfff00000;	/* 32 bits */
+				size_and_mask = 0;
+			}
+			break;
+		case X86_VENDOR_CENTAUR:
+			if (cpu_has_centaur_mcr) {
+				mtrr_if = mtrr_ops[X86_VENDOR_CENTAUR];
+				size_or_mask = 0xfff00000;	/* 32 bits */
+				size_and_mask = 0;
+			}
+			break;
+		case X86_VENDOR_CYRIX:
+			if (cpu_has_cyrix_arr) {
+				mtrr_if = mtrr_ops[X86_VENDOR_CYRIX];
+				size_or_mask = 0xfff00000;	/* 32 bits */
+				size_and_mask = 0;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+	printk(KERN_INFO "mtrr: v%s\n",MTRR_VERSION);
+
+	if (mtrr_if) {
+		set_num_var_ranges();
+		init_table();
+		init_other_cpus();
+
+		return sysdev_driver_register(&cpu_sysdev_class,
+					      &mtrr_sysdev_driver);
+	}
+	return -ENXIO;
+}
+
+subsys_initcall(mtrr_init);
diff --git a/arch/i386/kernel/cpu/mtrr/mtrr.h b/arch/i386/kernel/cpu/mtrr/mtrr.h
new file mode 100644
index 000000000000..de1351245599
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/mtrr.h
@@ -0,0 +1,98 @@
+/*
+ * local mtrr defines.
+ */
+
+#ifndef TRUE
+#define TRUE  1
+#define FALSE 0
+#endif
+
+#define MTRRcap_MSR     0x0fe
+#define MTRRdefType_MSR 0x2ff
+
+#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
+#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+#define NUM_FIXED_RANGES 88
+#define MTRRfix64K_00000_MSR 0x250
+#define MTRRfix16K_80000_MSR 0x258
+#define MTRRfix16K_A0000_MSR 0x259
+#define MTRRfix4K_C0000_MSR 0x268
+#define MTRRfix4K_C8000_MSR 0x269
+#define MTRRfix4K_D0000_MSR 0x26a
+#define MTRRfix4K_D8000_MSR 0x26b
+#define MTRRfix4K_E0000_MSR 0x26c
+#define MTRRfix4K_E8000_MSR 0x26d
+#define MTRRfix4K_F0000_MSR 0x26e
+#define MTRRfix4K_F8000_MSR 0x26f
+
+#define MTRR_CHANGE_MASK_FIXED     0x01
+#define MTRR_CHANGE_MASK_VARIABLE  0x02
+#define MTRR_CHANGE_MASK_DEFTYPE   0x04
+
+/* In the Intel processor's MTRR interface, the MTRR type is always held in
+   an 8 bit field: */
+typedef u8 mtrr_type;
+
+struct mtrr_ops {
+	u32	vendor;
+	u32	use_intel_if;
+//	void	(*init)(void);
+	void	(*set)(unsigned int reg, unsigned long base,
+		       unsigned long size, mtrr_type type);
+	void	(*set_all)(void);
+
+	void	(*get)(unsigned int reg, unsigned long *base,
+		       unsigned int *size, mtrr_type * type);
+	int	(*get_free_region) (unsigned long base, unsigned long size);
+
+	int	(*validate_add_page)(unsigned long base, unsigned long size,
+				     unsigned int type);
+	int	(*have_wrcomb)(void);
+};
+
+extern int generic_get_free_region(unsigned long base, unsigned long size);
+extern int generic_validate_add_page(unsigned long base, unsigned long size,
+				     unsigned int type);
+
+extern struct mtrr_ops generic_mtrr_ops;
+
+extern int positive_have_wrcomb(void);
+
+/* library functions for processor-specific routines */
+struct set_mtrr_context {
+	unsigned long flags;
+	unsigned long deftype_lo;
+	unsigned long deftype_hi;
+	unsigned long cr4val;
+	unsigned long ccr3;
+};
+
+struct mtrr_var_range {
+	unsigned long base_lo;
+	unsigned long base_hi;
+	unsigned long mask_lo;
+	unsigned long mask_hi;
+};
+
+void set_mtrr_done(struct set_mtrr_context *ctxt);
+void set_mtrr_cache_disable(struct set_mtrr_context *ctxt);
+void set_mtrr_prepare_save(struct set_mtrr_context *ctxt);
+
+void get_mtrr_state(void);
+
+extern void set_mtrr_ops(struct mtrr_ops * ops);
+
+extern u32 size_or_mask, size_and_mask;
+extern struct mtrr_ops * mtrr_if;
+
+#define is_cpu(vnd)	(mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd)
+#define use_intel()	(mtrr_if && mtrr_if->use_intel_if == 1)
+
+extern unsigned int num_var_ranges;
+
+void finalize_mtrr_state(void);
+void mtrr_state_warn(void);
+char *mtrr_attrib_to_str(int x);
+void mtrr_wrmsr(unsigned, unsigned, unsigned);
+
diff --git a/arch/i386/kernel/cpu/mtrr/state.c b/arch/i386/kernel/cpu/mtrr/state.c
new file mode 100644
index 000000000000..f62ecd15811a
--- /dev/null
+++ b/arch/i386/kernel/cpu/mtrr/state.c
@@ -0,0 +1,78 @@
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+#include "mtrr.h"
+
+
+/*  Put the processor into a state where MTRRs can be safely set  */
+void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
+{
+	unsigned int cr0;
+
+	/*  Disable interrupts locally  */
+	local_irq_save(ctxt->flags);
+
+	if (use_intel() || is_cpu(CYRIX)) {
+
+		/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
+		if ( cpu_has_pge ) {
+			ctxt->cr4val = read_cr4();
+			write_cr4(ctxt->cr4val & (unsigned char) ~(1 << 7));
+		}
+
+		/*  Disable and flush caches. Note that wbinvd flushes the TLBs as
+		    a side-effect  */
+		cr0 = read_cr0() | 0x40000000;
+		wbinvd();
+		write_cr0(cr0);
+		wbinvd();
+
+		if (use_intel())
+			/*  Save MTRR state */
+			rdmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+		else
+			/* Cyrix ARRs - everything else were excluded at the top */
+			ctxt->ccr3 = getCx86(CX86_CCR3);
+	}
+}
+
+void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
+{
+	if (use_intel()) 
+		/*  Disable MTRRs, and set the default type to uncached  */
+		mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL,
+		      ctxt->deftype_hi);
+	else if (is_cpu(CYRIX))
+		/* Cyrix ARRs - everything else were excluded at the top */
+		setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+}
+
+/*  Restore the processor after a set_mtrr_prepare  */
+void set_mtrr_done(struct set_mtrr_context *ctxt)
+{
+	if (use_intel() || is_cpu(CYRIX)) {
+
+		/*  Flush caches and TLBs  */
+		wbinvd();
+
+		/*  Restore MTRRdefType  */
+		if (use_intel())
+			/* Intel (P6) standard MTRRs */
+			mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+		else
+			/* Cyrix ARRs - everything else was excluded at the top */
+			setCx86(CX86_CCR3, ctxt->ccr3);
+		
+		/*  Enable caches  */
+		write_cr0(read_cr0() & 0xbfffffff);
+
+		/*  Restore value of CR4  */
+		if ( cpu_has_pge )
+			write_cr4(ctxt->cr4val);
+	}
+	/*  Re-enable interrupts locally (if enabled previously)  */
+	local_irq_restore(ctxt->flags);
+}
+
diff --git a/arch/i386/kernel/cpu/nexgen.c b/arch/i386/kernel/cpu/nexgen.c
new file mode 100644
index 000000000000..30898a260a5c
--- /dev/null
+++ b/arch/i386/kernel/cpu/nexgen.c
@@ -0,0 +1,63 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+/*
+ *	Detect a NexGen CPU running without BIOS hypercode new enough
+ *	to have CPUID. (Thanks to Herbert Oppmann)
+ */
+ 
+static int __init deep_magic_nexgen_probe(void)
+{
+	int ret;
+	
+	__asm__ __volatile__ (
+		"	movw	$0x5555, %%ax\n"
+		"	xorw	%%dx,%%dx\n"
+		"	movw	$2, %%cx\n"
+		"	divw	%%cx\n"
+		"	movl	$0, %%eax\n"
+		"	jnz	1f\n"
+		"	movl	$1, %%eax\n"
+		"1:\n" 
+		: "=a" (ret) : : "cx", "dx" );
+	return  ret;
+}
+
+static void __init init_nexgen(struct cpuinfo_x86 * c)
+{
+	c->x86_cache_size = 256; /* A few had 1 MB... */
+}
+
+static void __init nexgen_identify(struct cpuinfo_x86 * c)
+{
+	/* Detect NexGen with old hypercode */
+	if ( deep_magic_nexgen_probe() ) {
+		strcpy(c->x86_vendor_id, "NexGenDriven");
+	}
+	generic_identify(c);
+}
+
+static struct cpu_dev nexgen_cpu_dev __initdata = {
+	.c_vendor	= "Nexgen",
+	.c_ident	= { "NexGenDriven" },
+	.c_models = {
+			{ .vendor = X86_VENDOR_NEXGEN,
+			  .family = 5,
+			  .model_names = { [1] = "Nx586" }
+			},
+	},
+	.c_init		= init_nexgen,
+	.c_identify	= nexgen_identify,
+};
+
+int __init nexgen_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_NEXGEN] = &nexgen_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(nexgen_init_cpu);
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
new file mode 100644
index 000000000000..c8d83fdc237a
--- /dev/null
+++ b/arch/i386/kernel/cpu/proc.c
@@ -0,0 +1,149 @@
+#include <linux/smp.h>
+#include <linux/timex.h>
+#include <linux/string.h>
+#include <asm/semaphore.h>
+#include <linux/seq_file.h>
+
+/*
+ *	Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	/* 
+	 * These flag bits must match the definitions in <asm/cpufeature.h>.
+	 * NULL means this bit is undefined or reserved; either way it doesn't
+	 * have meaning as far as Linux is concerned.  Note that it's important
+	 * to realize there is a difference between this table and CPUID -- if
+	 * applications want to get the raw CPUID data, they should access
+	 * /dev/cpu/<cpu_nr>/cpuid instead.
+	 */
+	static char *x86_cap_flags[] = {
+		/* Intel-defined */
+	        "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
+	        "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
+	        "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
+	        "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
+
+		/* AMD-defined */
+		"pni", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
+		NULL, "fxsr_opt", NULL, NULL, NULL, "lm", "3dnowext", "3dnow",
+
+		/* Transmeta-defined */
+		"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+		/* Other (Linux-defined) */
+		"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+		/* Intel-defined (#2) */
+		"pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+		"tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+		/* VIA/Cyrix/Centaur-defined */
+		NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+		/* AMD-defined (#2) */
+		"lahf_lm", "cmp_legacy", NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	};
+	struct cpuinfo_x86 *c = v;
+	int i, n = c - cpu_data;
+	int fpu_exception;
+
+#ifdef CONFIG_SMP
+	if (!cpu_online(n))
+		return 0;
+#endif
+	seq_printf(m, "processor\t: %d\n"
+		"vendor_id\t: %s\n"
+		"cpu family\t: %d\n"
+		"model\t\t: %d\n"
+		"model name\t: %s\n",
+		n,
+		c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
+		c->x86,
+		c->x86_model,
+		c->x86_model_id[0] ? c->x86_model_id : "unknown");
+
+	if (c->x86_mask || c->cpuid_level >= 0)
+		seq_printf(m, "stepping\t: %d\n", c->x86_mask);
+	else
+		seq_printf(m, "stepping\t: unknown\n");
+
+	if ( cpu_has(c, X86_FEATURE_TSC) ) {
+		seq_printf(m, "cpu MHz\t\t: %lu.%03lu\n",
+			cpu_khz / 1000, (cpu_khz % 1000));
+	}
+
+	/* Cache size */
+	if (c->x86_cache_size >= 0)
+		seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
+#ifdef CONFIG_X86_HT
+	seq_printf(m, "physical id\t: %d\n", phys_proc_id[n]);
+	seq_printf(m, "siblings\t: %d\n", c->x86_num_cores * smp_num_siblings);
+#endif
+	
+	/* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */
+	fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
+	seq_printf(m, "fdiv_bug\t: %s\n"
+			"hlt_bug\t\t: %s\n"
+			"f00f_bug\t: %s\n"
+			"coma_bug\t: %s\n"
+			"fpu\t\t: %s\n"
+			"fpu_exception\t: %s\n"
+			"cpuid level\t: %d\n"
+			"wp\t\t: %s\n"
+			"flags\t\t:",
+		     c->fdiv_bug ? "yes" : "no",
+		     c->hlt_works_ok ? "no" : "yes",
+		     c->f00f_bug ? "yes" : "no",
+		     c->coma_bug ? "yes" : "no",
+		     c->hard_math ? "yes" : "no",
+		     fpu_exception ? "yes" : "no",
+		     c->cpuid_level,
+		     c->wp_works_ok ? "yes" : "no");
+
+	for ( i = 0 ; i < 32*NCAPINTS ; i++ )
+		if ( test_bit(i, c->x86_capability) &&
+		     x86_cap_flags[i] != NULL )
+			seq_printf(m, " %s", x86_cap_flags[i]);
+
+	seq_printf(m, "\nbogomips\t: %lu.%02lu\n\n",
+		     c->loops_per_jiffy/(500000/HZ),
+		     (c->loops_per_jiffy/(5000/HZ)) % 100);
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
diff --git a/arch/i386/kernel/cpu/rise.c b/arch/i386/kernel/cpu/rise.c
new file mode 100644
index 000000000000..8602425628ca
--- /dev/null
+++ b/arch/i386/kernel/cpu/rise.c
@@ -0,0 +1,53 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static void __init init_rise(struct cpuinfo_x86 *c)
+{
+	printk("CPU: Rise iDragon");
+	if (c->x86_model > 2)
+		printk(" II");
+	printk("\n");
+
+	/* Unhide possibly hidden capability flags
+	   The mp6 iDragon family don't have MSRs.
+	   We switch on extra features with this cpuid weirdness: */
+	__asm__ (
+		"movl $0x6363452a, %%eax\n\t"
+		"movl $0x3231206c, %%ecx\n\t"
+		"movl $0x2a32313a, %%edx\n\t"
+		"cpuid\n\t"
+		"movl $0x63634523, %%eax\n\t"
+		"movl $0x32315f6c, %%ecx\n\t"
+		"movl $0x2333313a, %%edx\n\t"
+		"cpuid\n\t" : : : "eax", "ebx", "ecx", "edx"
+	);
+	set_bit(X86_FEATURE_CX8, c->x86_capability);
+}
+
+static struct cpu_dev rise_cpu_dev __initdata = {
+	.c_vendor	= "Rise",
+	.c_ident	= { "RiseRiseRise" },
+	.c_models = {
+		{ .vendor = X86_VENDOR_RISE, .family = 5, .model_names = 
+		  { 
+			  [0] = "iDragon", 
+			  [2] = "iDragon", 
+			  [8] = "iDragon II", 
+			  [9] = "iDragon II"
+		  }
+		},
+	},
+	.c_init		= init_rise,
+};
+
+int __init rise_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_RISE] = &rise_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(rise_init_cpu);
diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c
new file mode 100644
index 000000000000..f57e5ee94943
--- /dev/null
+++ b/arch/i386/kernel/cpu/transmeta.c
@@ -0,0 +1,107 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include "cpu.h"
+
+static void __init init_transmeta(struct cpuinfo_x86 *c)
+{
+	unsigned int cap_mask, uk, max, dummy;
+	unsigned int cms_rev1, cms_rev2;
+	unsigned int cpu_rev, cpu_freq, cpu_flags, new_cpu_rev;
+	char cpu_info[65];
+
+	get_model_name(c);	/* Same as AMD/Cyrix */
+	display_cacheinfo(c);
+
+	/* Print CMS and CPU revision */
+	max = cpuid_eax(0x80860000);
+	cpu_rev = 0;
+	if ( max >= 0x80860001 ) {
+		cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags); 
+		if (cpu_rev != 0x02000000) {
+			printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
+				(cpu_rev >> 24) & 0xff,
+				(cpu_rev >> 16) & 0xff,
+				(cpu_rev >> 8) & 0xff,
+				cpu_rev & 0xff,
+				cpu_freq);
+		}
+	}
+	if ( max >= 0x80860002 ) {
+		cpuid(0x80860002, &new_cpu_rev, &cms_rev1, &cms_rev2, &dummy);
+		if (cpu_rev == 0x02000000) {
+			printk(KERN_INFO "CPU: Processor revision %08X, %u MHz\n",
+				new_cpu_rev, cpu_freq);
+		}
+		printk(KERN_INFO "CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n",
+		       (cms_rev1 >> 24) & 0xff,
+		       (cms_rev1 >> 16) & 0xff,
+		       (cms_rev1 >> 8) & 0xff,
+		       cms_rev1 & 0xff,
+		       cms_rev2);
+	}
+	if ( max >= 0x80860006 ) {
+		cpuid(0x80860003,
+		      (void *)&cpu_info[0],
+		      (void *)&cpu_info[4],
+		      (void *)&cpu_info[8],
+		      (void *)&cpu_info[12]);
+		cpuid(0x80860004,
+		      (void *)&cpu_info[16],
+		      (void *)&cpu_info[20],
+		      (void *)&cpu_info[24],
+		      (void *)&cpu_info[28]);
+		cpuid(0x80860005,
+		      (void *)&cpu_info[32],
+		      (void *)&cpu_info[36],
+		      (void *)&cpu_info[40],
+		      (void *)&cpu_info[44]);
+		cpuid(0x80860006,
+		      (void *)&cpu_info[48],
+		      (void *)&cpu_info[52],
+		      (void *)&cpu_info[56],
+		      (void *)&cpu_info[60]);
+		cpu_info[64] = '\0';
+		printk(KERN_INFO "CPU: %s\n", cpu_info);
+	}
+
+	/* Unhide possibly hidden capability flags */
+	rdmsr(0x80860004, cap_mask, uk);
+	wrmsr(0x80860004, ~0, uk);
+	c->x86_capability[0] = cpuid_edx(0x00000001);
+	wrmsr(0x80860004, cap_mask, uk);
+	
+	/* If we can run i686 user-space code, call us an i686 */
+#define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV)
+        if ( c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686 )
+		c->x86 = 6;
+}
+
+static void transmeta_identify(struct cpuinfo_x86 * c)
+{
+	u32 xlvl;
+	generic_identify(c);
+
+	/* Transmeta-defined flags: level 0x80860001 */
+	xlvl = cpuid_eax(0x80860000);
+	if ( (xlvl & 0xffff0000) == 0x80860000 ) {
+		if (  xlvl >= 0x80860001 )
+			c->x86_capability[2] = cpuid_edx(0x80860001);
+	}
+}
+
+static struct cpu_dev transmeta_cpu_dev __initdata = {
+	.c_vendor	= "Transmeta",
+	.c_ident	= { "GenuineTMx86", "TransmetaCPU" },
+	.c_init		= init_transmeta,
+	.c_identify	= transmeta_identify,
+};
+
+int __init transmeta_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_TRANSMETA] = &transmeta_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(transmeta_init_cpu);
diff --git a/arch/i386/kernel/cpu/umc.c b/arch/i386/kernel/cpu/umc.c
new file mode 100644
index 000000000000..264fcad559d5
--- /dev/null
+++ b/arch/i386/kernel/cpu/umc.c
@@ -0,0 +1,33 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include "cpu.h"
+
+/* UMC chips appear to be only either 386 or 486, so no special init takes place.
+ */
+static void __init init_umc(struct cpuinfo_x86 * c)
+{
+
+}
+
+static struct cpu_dev umc_cpu_dev __initdata = {
+	.c_vendor	= "UMC",
+	.c_ident 	= { "UMC UMC UMC" },
+	.c_models = {
+		{ .vendor = X86_VENDOR_UMC, .family = 4, .model_names =
+		  { 
+			  [1] = "U5D", 
+			  [2] = "U5S", 
+		  }
+		},
+	},
+	.c_init		= init_umc,
+};
+
+int __init umc_init_cpu(void)
+{
+	cpu_devs[X86_VENDOR_UMC] = &umc_cpu_dev;
+	return 0;
+}
+
+//early_arch_initcall(umc_init_cpu);
diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c
new file mode 100644
index 000000000000..2e2756345bb2
--- /dev/null
+++ b/arch/i386/kernel/cpuid.c
@@ -0,0 +1,246 @@
+/* ----------------------------------------------------------------------- *
+ *   
+ *   Copyright 2000 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ *   USA; either version 2 of the License, or (at your option) any later
+ *   version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * cpuid.c
+ *
+ * x86 CPUID access device
+ *
+ * This device is accessed by lseek() to the appropriate CPUID level
+ * and then read in chunks of 16 bytes.  A larger size means multiple
+ * reads of consecutive levels.
+ *
+ * This driver uses /dev/cpu/%d/cpuid where %d is the minor number, and on
+ * an SMP box will direct the access to CPU %d.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/smp.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/smp_lock.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+static struct class_simple *cpuid_class;
+
+#ifdef CONFIG_SMP
+
+struct cpuid_command {
+	int cpu;
+	u32 reg;
+	u32 *data;
+};
+
+static void cpuid_smp_cpuid(void *cmd_block)
+{
+	struct cpuid_command *cmd = (struct cpuid_command *)cmd_block;
+
+	if (cmd->cpu == smp_processor_id())
+		cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2],
+		      &cmd->data[3]);
+}
+
+static inline void do_cpuid(int cpu, u32 reg, u32 * data)
+{
+	struct cpuid_command cmd;
+
+	preempt_disable();
+	if (cpu == smp_processor_id()) {
+		cpuid(reg, &data[0], &data[1], &data[2], &data[3]);
+	} else {
+		cmd.cpu = cpu;
+		cmd.reg = reg;
+		cmd.data = data;
+
+		smp_call_function(cpuid_smp_cpuid, &cmd, 1, 1);
+	}
+	preempt_enable();
+}
+#else				/* ! CONFIG_SMP */
+
+static inline void do_cpuid(int cpu, u32 reg, u32 * data)
+{
+	cpuid(reg, &data[0], &data[1], &data[2], &data[3]);
+}
+
+#endif				/* ! CONFIG_SMP */
+
+static loff_t cpuid_seek(struct file *file, loff_t offset, int orig)
+{
+	loff_t ret;
+
+	lock_kernel();
+
+	switch (orig) {
+	case 0:
+		file->f_pos = offset;
+		ret = file->f_pos;
+		break;
+	case 1:
+		file->f_pos += offset;
+		ret = file->f_pos;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	unlock_kernel();
+	return ret;
+}
+
+static ssize_t cpuid_read(struct file *file, char __user *buf,
+			  size_t count, loff_t * ppos)
+{
+	char __user *tmp = buf;
+	u32 data[4];
+	size_t rv;
+	u32 reg = *ppos;
+	int cpu = iminor(file->f_dentry->d_inode);
+
+	if (count % 16)
+		return -EINVAL;	/* Invalid chunk size */
+
+	for (rv = 0; count; count -= 16) {
+		do_cpuid(cpu, reg, data);
+		if (copy_to_user(tmp, &data, 16))
+			return -EFAULT;
+		tmp += 16;
+		*ppos = reg++;
+	}
+
+	return tmp - buf;
+}
+
+static int cpuid_open(struct inode *inode, struct file *file)
+{
+	unsigned int cpu = iminor(file->f_dentry->d_inode);
+	struct cpuinfo_x86 *c = &(cpu_data)[cpu];
+
+	if (cpu >= NR_CPUS || !cpu_online(cpu))
+		return -ENXIO;	/* No such CPU */
+	if (c->cpuid_level < 0)
+		return -EIO;	/* CPUID not supported */
+
+	return 0;
+}
+
+/*
+ * File operations we support
+ */
+static struct file_operations cpuid_fops = {
+	.owner = THIS_MODULE,
+	.llseek = cpuid_seek,
+	.read = cpuid_read,
+	.open = cpuid_open,
+};
+
+static int cpuid_class_simple_device_add(int i) 
+{
+	int err = 0;
+	struct class_device *class_err;
+
+	class_err = class_simple_device_add(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
+	if (IS_ERR(class_err))
+		err = PTR_ERR(class_err);
+	return err;
+}
+
+static int __devinit cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+		cpuid_class_simple_device_add(cpu);
+		break;
+	case CPU_DEAD:
+		class_simple_device_remove(MKDEV(CPUID_MAJOR, cpu));
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpuid_class_cpu_notifier =
+{
+	.notifier_call = cpuid_class_cpu_callback,
+};
+
+static int __init cpuid_init(void)
+{
+	int i, err = 0;
+	i = 0;
+
+	if (register_chrdev(CPUID_MAJOR, "cpu/cpuid", &cpuid_fops)) {
+		printk(KERN_ERR "cpuid: unable to get major %d for cpuid\n",
+		       CPUID_MAJOR);
+		err = -EBUSY;
+		goto out;
+	}
+	cpuid_class = class_simple_create(THIS_MODULE, "cpuid");
+	if (IS_ERR(cpuid_class)) {
+		err = PTR_ERR(cpuid_class);
+		goto out_chrdev;
+	}
+	for_each_online_cpu(i) {
+		err = cpuid_class_simple_device_add(i);
+		if (err != 0) 
+			goto out_class;
+	}
+	register_cpu_notifier(&cpuid_class_cpu_notifier);
+
+	err = 0;
+	goto out;
+
+out_class:
+	i = 0;
+	for_each_online_cpu(i) {
+		class_simple_device_remove(MKDEV(CPUID_MAJOR, i));
+	}
+	class_simple_destroy(cpuid_class);
+out_chrdev:
+	unregister_chrdev(CPUID_MAJOR, "cpu/cpuid");	
+out:
+	return err;
+}
+
+static void __exit cpuid_exit(void)
+{
+	int cpu = 0;
+
+	for_each_online_cpu(cpu)
+		class_simple_device_remove(MKDEV(CPUID_MAJOR, cpu));
+	class_simple_destroy(cpuid_class);
+	unregister_chrdev(CPUID_MAJOR, "cpu/cpuid");
+	unregister_cpu_notifier(&cpuid_class_cpu_notifier);
+}
+
+module_init(cpuid_init);
+module_exit(cpuid_exit);
+
+MODULE_AUTHOR("H. Peter Anvin <hpa@zytor.com>");
+MODULE_DESCRIPTION("x86 generic CPUID driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c
new file mode 100644
index 000000000000..6ed7e28f306c
--- /dev/null
+++ b/arch/i386/kernel/dmi_scan.c
@@ -0,0 +1,487 @@
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <asm/io.h>
+#include <linux/pm.h>
+#include <asm/system.h>
+#include <linux/dmi.h>
+#include <linux/bootmem.h>
+
+
+struct dmi_header
+{
+	u8	type;
+	u8	length;
+	u16	handle;
+};
+
+#undef DMI_DEBUG
+
+#ifdef DMI_DEBUG
+#define dmi_printk(x) printk x
+#else
+#define dmi_printk(x)
+#endif
+
+static char * __init dmi_string(struct dmi_header *dm, u8 s)
+{
+	u8 *bp=(u8 *)dm;
+	bp+=dm->length;
+	if(!s)
+		return "";
+	s--;
+	while(s>0 && *bp)
+	{
+		bp+=strlen(bp);
+		bp++;
+		s--;
+	}
+	return bp;
+}
+
+/*
+ *	We have to be cautious here. We have seen BIOSes with DMI pointers
+ *	pointing to completely the wrong place for example
+ */
+ 
+static int __init dmi_table(u32 base, int len, int num, void (*decode)(struct dmi_header *))
+{
+	u8 *buf;
+	struct dmi_header *dm;
+	u8 *data;
+	int i=0;
+		
+	buf = bt_ioremap(base, len);
+	if(buf==NULL)
+		return -1;
+
+	data = buf;
+
+	/*
+ 	 *	Stop when we see all the items the table claimed to have
+ 	 *	OR we run off the end of the table (also happens)
+ 	 */
+ 
+	while(i<num && data-buf+sizeof(struct dmi_header)<=len)
+	{
+		dm=(struct dmi_header *)data;
+		/*
+		 *  We want to know the total length (formated area and strings)
+		 *  before decoding to make sure we won't run off the table in
+		 *  dmi_decode or dmi_string
+		 */
+		data+=dm->length;
+		while(data-buf<len-1 && (data[0] || data[1]))
+			data++;
+		if(data-buf<len-1)
+			decode(dm);
+		data+=2;
+		i++;
+	}
+	bt_iounmap(buf, len);
+	return 0;
+}
+
+
+inline static int __init dmi_checksum(u8 *buf)
+{
+	u8 sum=0;
+	int a;
+	
+	for(a=0; a<15; a++)
+		sum+=buf[a];
+	return (sum==0);
+}
+
+static int __init dmi_iterate(void (*decode)(struct dmi_header *))
+{
+	u8 buf[15];
+	char __iomem *p, *q;
+
+	/*
+	 * no iounmap() for that ioremap(); it would be a no-op, but it's
+	 * so early in setup that sucker gets confused into doing what
+	 * it shouldn't if we actually call it.
+	 */
+	p = ioremap(0xF0000, 0x10000);
+	if (p == NULL)
+		return -1;
+	for (q = p; q < p + 0x10000; q += 16) {
+		memcpy_fromio(buf, q, 15);
+		if(memcmp(buf, "_DMI_", 5)==0 && dmi_checksum(buf))
+		{
+			u16 num=buf[13]<<8|buf[12];
+			u16 len=buf[7]<<8|buf[6];
+			u32 base=buf[11]<<24|buf[10]<<16|buf[9]<<8|buf[8];
+
+			/*
+			 * DMI version 0.0 means that the real version is taken from
+			 * the SMBIOS version, which we don't know at this point.
+			 */
+			if(buf[14]!=0)
+				printk(KERN_INFO "DMI %d.%d present.\n",
+					buf[14]>>4, buf[14]&0x0F);
+			else
+				printk(KERN_INFO "DMI present.\n");
+			dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n",
+				num, len));
+			dmi_printk((KERN_INFO "DMI table at 0x%08X.\n",
+				base));
+			if(dmi_table(base,len, num, decode)==0)
+				return 0;
+		}
+	}
+	return -1;
+}
+
+static char *dmi_ident[DMI_STRING_MAX];
+
+/*
+ *	Save a DMI string
+ */
+ 
+static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
+{
+	char *d = (char*)dm;
+	char *p = dmi_string(dm, d[string]);
+	if(p==NULL || *p == 0)
+		return;
+	if (dmi_ident[slot])
+		return;
+	dmi_ident[slot] = alloc_bootmem(strlen(p)+1);
+	if(dmi_ident[slot])
+		strcpy(dmi_ident[slot], p);
+	else
+		printk(KERN_ERR "dmi_save_ident: out of memory.\n");
+}
+
+/*
+ * Ugly compatibility crap.
+ */
+#define dmi_blacklist	dmi_system_id
+#define NO_MATCH	{ DMI_NONE, NULL}
+#define MATCH		DMI_MATCH
+
+/*
+ * Toshiba keyboard likes to repeat keys when they are not repeated.
+ */
+
+static __init int broken_toshiba_keyboard(struct dmi_blacklist *d)
+{
+	printk(KERN_WARNING "Toshiba with broken keyboard detected. If your keyboard sometimes generates 3 keypresses instead of one, see http://davyd.ucc.asn.au/projects/toshiba/README\n");
+	return 0;
+}
+
+
+#ifdef CONFIG_ACPI_SLEEP
+static __init int reset_videomode_after_s3(struct dmi_blacklist *d)
+{
+	/* See acpi_wakeup.S */
+	extern long acpi_video_flags;
+	acpi_video_flags |= 2;
+	return 0;
+}
+#endif
+
+
+#ifdef	CONFIG_ACPI_BOOT
+extern int acpi_force;
+
+static __init __attribute__((unused)) int dmi_disable_acpi(struct dmi_blacklist *d) 
+{ 
+	if (!acpi_force) { 
+		printk(KERN_NOTICE "%s detected: acpi off\n",d->ident); 
+		disable_acpi();
+	} else { 
+		printk(KERN_NOTICE 
+		       "Warning: DMI blacklist says broken, but acpi forced\n"); 
+	}
+	return 0;
+} 
+
+/*
+ * Limit ACPI to CPU enumeration for HT
+ */
+static __init __attribute__((unused)) int force_acpi_ht(struct dmi_blacklist *d) 
+{ 
+	if (!acpi_force) { 
+		printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident); 
+		disable_acpi();
+		acpi_ht = 1; 
+	} else { 
+		printk(KERN_NOTICE 
+		       "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); 
+	}
+	return 0;
+} 
+#endif
+
+#ifdef	CONFIG_ACPI_PCI
+static __init int disable_acpi_irq(struct dmi_blacklist *d) 
+{
+	if (!acpi_force) {
+		printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
+		       d->ident); 	
+		acpi_noirq_set();
+	}
+	return 0;
+}
+static __init int disable_acpi_pci(struct dmi_blacklist *d) 
+{
+	if (!acpi_force) {
+		printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
+		       d->ident); 	
+		acpi_disable_pci();
+	}
+	return 0;
+}  
+#endif
+
+/*
+ *	Process the DMI blacklists
+ */
+ 
+
+/*
+ *	This will be expanded over time to force things like the APM 
+ *	interrupt mask settings according to the laptop
+ */
+ 
+static __initdata struct dmi_blacklist dmi_blacklist[]={
+
+	{ broken_toshiba_keyboard, "Toshiba Satellite 4030cdt", { /* Keyboard generates spurious repeats */
+			MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
+			NO_MATCH, NO_MATCH, NO_MATCH
+			} },
+#ifdef CONFIG_ACPI_SLEEP
+	{ reset_videomode_after_s3, "Toshiba Satellite 4030cdt", { /* Reset video mode after returning from ACPI S3 sleep */
+			MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
+			NO_MATCH, NO_MATCH, NO_MATCH
+			} },
+#endif
+
+#ifdef	CONFIG_ACPI_BOOT
+	/*
+	 * If your system is blacklisted here, but you find that acpi=force
+	 * works for you, please contact acpi-devel@sourceforge.net
+	 */
+
+	/*
+	 *	Boxes that need ACPI disabled
+	 */
+
+	{ dmi_disable_acpi, "IBM Thinkpad", {
+			MATCH(DMI_BOARD_VENDOR, "IBM"),
+			MATCH(DMI_BOARD_NAME, "2629H1G"),
+			NO_MATCH, NO_MATCH }},
+
+	/*
+	 *	Boxes that need acpi=ht 
+	 */
+
+	{ force_acpi_ht, "FSC Primergy T850", {
+			MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "DELL GX240", {
+			MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"),
+			MATCH(DMI_BOARD_NAME, "OptiPlex GX240"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "HP VISUALIZE NT Workstation", {
+			MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "Compaq Workstation W8000", {
+			MATCH(DMI_SYS_VENDOR, "Compaq"),
+			MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "ASUS P4B266", {
+			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			MATCH(DMI_BOARD_NAME, "P4B266"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "ASUS P2B-DS", {
+			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			MATCH(DMI_BOARD_NAME, "P2B-DS"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "ASUS CUR-DLS", {
+			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			MATCH(DMI_BOARD_NAME, "CUR-DLS"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "ABIT i440BX-W83977", {
+			MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
+			MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "IBM Bladecenter", {
+			MATCH(DMI_BOARD_VENDOR, "IBM"),
+			MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "IBM eServer xSeries 360", {
+			MATCH(DMI_BOARD_VENDOR, "IBM"),
+			MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "IBM eserver xSeries 330", {
+			MATCH(DMI_BOARD_VENDOR, "IBM"),
+			MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
+			NO_MATCH, NO_MATCH }},
+
+	{ force_acpi_ht, "IBM eserver xSeries 440", {
+			MATCH(DMI_BOARD_VENDOR, "IBM"),
+			MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
+			NO_MATCH, NO_MATCH }},
+
+#endif	// CONFIG_ACPI_BOOT
+
+#ifdef	CONFIG_ACPI_PCI
+	/*
+	 *	Boxes that need ACPI PCI IRQ routing disabled
+	 */
+
+	{ disable_acpi_irq, "ASUS A7V", {
+			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
+			MATCH(DMI_BOARD_NAME, "<A7V>"),
+			/* newer BIOS, Revision 1011, does work */
+			MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"),
+			NO_MATCH }},
+
+	/*
+	 *	Boxes that need ACPI PCI IRQ routing and PCI scan disabled
+	 */
+	{ disable_acpi_pci, "ASUS PR-DLS", {	/* _BBN 0 bug */
+			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			MATCH(DMI_BOARD_NAME, "PR-DLS"),
+			MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"),
+			MATCH(DMI_BIOS_DATE, "03/21/2003") }},
+
+ 	{ disable_acpi_pci, "Acer TravelMate 36x Laptop", {
+ 			MATCH(DMI_SYS_VENDOR, "Acer"),
+ 			MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
+ 			NO_MATCH, NO_MATCH
+ 			} },
+
+#endif
+
+	{ NULL, }
+};
+
+/*
+ *	Process a DMI table entry. Right now all we care about are the BIOS
+ *	and machine entries. For 2.5 we should pull the smbus controller info
+ *	out of here.
+ */
+
+static void __init dmi_decode(struct dmi_header *dm)
+{
+#ifdef DMI_DEBUG
+	u8 *data = (u8 *)dm;
+#endif
+	
+	switch(dm->type)
+	{
+		case  0:
+			dmi_printk(("BIOS Vendor: %s\n",
+				dmi_string(dm, data[4])));
+			dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
+			dmi_printk(("BIOS Version: %s\n", 
+				dmi_string(dm, data[5])));
+			dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
+			dmi_printk(("BIOS Release: %s\n",
+				dmi_string(dm, data[8])));
+			dmi_save_ident(dm, DMI_BIOS_DATE, 8);
+			break;
+		case 1:
+			dmi_printk(("System Vendor: %s\n",
+				dmi_string(dm, data[4])));
+			dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
+			dmi_printk(("Product Name: %s\n",
+				dmi_string(dm, data[5])));
+			dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
+			dmi_printk(("Version: %s\n",
+				dmi_string(dm, data[6])));
+			dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
+			dmi_printk(("Serial Number: %s\n",
+				dmi_string(dm, data[7])));
+			break;
+		case 2:
+			dmi_printk(("Board Vendor: %s\n",
+				dmi_string(dm, data[4])));
+			dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
+			dmi_printk(("Board Name: %s\n",
+				dmi_string(dm, data[5])));
+			dmi_save_ident(dm, DMI_BOARD_NAME, 5);
+			dmi_printk(("Board Version: %s\n",
+				dmi_string(dm, data[6])));
+			dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
+			break;
+	}
+}
+
+void __init dmi_scan_machine(void)
+{
+	int err = dmi_iterate(dmi_decode);
+	if(err == 0)
+ 		dmi_check_system(dmi_blacklist);
+	else
+		printk(KERN_INFO "DMI not present.\n");
+}
+
+
+/**
+ *	dmi_check_system - check system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *
+ *	Walk the blacklist table running matching functions until someone
+ *	returns non zero or we hit the end. Callback function is called for
+ *	each successfull match. Returns the number of matches.
+ */
+int dmi_check_system(struct dmi_system_id *list)
+{
+	int i, count = 0;
+	struct dmi_system_id *d = list;
+
+	while (d->ident) {
+		for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
+			int s = d->matches[i].slot;
+			if (s == DMI_NONE)
+				continue;
+			if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr))
+				continue;
+			/* No match */
+			goto fail;
+		}
+		if (d->callback && d->callback(d))
+			break;
+		count++;
+fail:		d++;
+	}
+
+	return count;
+}
+
+EXPORT_SYMBOL(dmi_check_system);
+
+/**
+ *	dmi_get_system_info - return DMI data value
+ *	@field: data index (see enum dmi_filed)
+ *
+ *	Returns one DMI data value, can be used to perform
+ *	complex DMI data checks.
+ */
+char * dmi_get_system_info(int field)
+{
+	return dmi_ident[field];
+}
+
diff --git a/arch/i386/kernel/doublefault.c b/arch/i386/kernel/doublefault.c
new file mode 100644
index 000000000000..789af3e9fb1f
--- /dev/null
+++ b/arch/i386/kernel/doublefault.c
@@ -0,0 +1,65 @@
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/desc.h>
+
+#define DOUBLEFAULT_STACKSIZE (1024)
+static unsigned long doublefault_stack[DOUBLEFAULT_STACKSIZE];
+#define STACK_START (unsigned long)(doublefault_stack+DOUBLEFAULT_STACKSIZE)
+
+#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + 0x1000000)
+
+static void doublefault_fn(void)
+{
+	struct Xgt_desc_struct gdt_desc = {0, 0};
+	unsigned long gdt, tss;
+
+	__asm__ __volatile__("sgdt %0": "=m" (gdt_desc): :"memory");
+	gdt = gdt_desc.address;
+
+	printk("double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size);
+
+	if (ptr_ok(gdt)) {
+		gdt += GDT_ENTRY_TSS << 3;
+		tss = *(u16 *)(gdt+2);
+		tss += *(u8 *)(gdt+4) << 16;
+		tss += *(u8 *)(gdt+7) << 24;
+		printk("double fault, tss at %08lx\n", tss);
+
+		if (ptr_ok(tss)) {
+			struct tss_struct *t = (struct tss_struct *)tss;
+
+			printk("eip = %08lx, esp = %08lx\n", t->eip, t->esp);
+
+			printk("eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n",
+				t->eax, t->ebx, t->ecx, t->edx);
+			printk("esi = %08lx, edi = %08lx\n",
+				t->esi, t->edi);
+		}
+	}
+
+	for (;;) /* nothing */;
+}
+
+struct tss_struct doublefault_tss __cacheline_aligned = {
+	.esp0		= STACK_START,
+	.ss0		= __KERNEL_DS,
+	.ldt		= 0,
+	.io_bitmap_base	= INVALID_IO_BITMAP_OFFSET,
+
+	.eip		= (unsigned long) doublefault_fn,
+	.eflags		= X86_EFLAGS_SF | 0x2,	/* 0x2 bit is always set */
+	.esp		= STACK_START,
+	.es		= __USER_DS,
+	.cs		= __KERNEL_CS,
+	.ss		= __KERNEL_DS,
+	.ds		= __USER_DS,
+
+	.__cr3		= __pa(swapper_pg_dir)
+};
diff --git a/arch/i386/kernel/early_printk.c b/arch/i386/kernel/early_printk.c
new file mode 100644
index 000000000000..92f812ba275c
--- /dev/null
+++ b/arch/i386/kernel/early_printk.c
@@ -0,0 +1,2 @@
+
+#include "../../x86_64/kernel/early_printk.c"
diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c
new file mode 100644
index 000000000000..9e5e0d8bd36e
--- /dev/null
+++ b/arch/i386/kernel/efi.c
@@ -0,0 +1,635 @@
+/*
+ * Extensible Firmware Interface
+ *
+ * Based on Extensible Firmware Interface Specification version 1.0
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999-2002 Hewlett-Packard Co.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * All EFI Runtime Services are not implemented yet as EFI only
+ * supports physical mode addressing on SoftSDV. This is to be fixed
+ * in a future version.  --drummond 1999-07-20
+ *
+ * Implemented EFI runtime services and virtual mode calls.  --davidm
+ *
+ * Goutham Rao: <goutham.rao@intel.com>
+ *	Skip non-WB memory and ignore empty memory ranges.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/spinlock.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/efi.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/desc.h>
+#include <asm/tlbflush.h>
+
+#define EFI_DEBUG	0
+#define PFX 		"EFI: "
+
+extern efi_status_t asmlinkage efi_call_phys(void *, ...);
+
+struct efi efi;
+EXPORT_SYMBOL(efi);
+static struct efi efi_phys __initdata;
+struct efi_memory_map memmap __initdata;
+
+/*
+ * We require an early boot_ioremap mapping mechanism initially
+ */
+extern void * boot_ioremap(unsigned long, unsigned long);
+
+/*
+ * To make EFI call EFI runtime service in physical addressing mode we need
+ * prelog/epilog before/after the invocation to disable interrupt, to
+ * claim EFI runtime service handler exclusively and to duplicate a memory in
+ * low memory space say 0 - 3G.
+ */
+
+static unsigned long efi_rt_eflags;
+static DEFINE_SPINLOCK(efi_rt_lock);
+static pgd_t efi_bak_pg_dir_pointer[2];
+
+static void efi_call_phys_prelog(void)
+{
+	unsigned long cr4;
+	unsigned long temp;
+
+	spin_lock(&efi_rt_lock);
+	local_irq_save(efi_rt_eflags);
+
+	/*
+	 * If I don't have PSE, I should just duplicate two entries in page
+	 * directory. If I have PSE, I just need to duplicate one entry in
+	 * page directory.
+	 */
+	__asm__ __volatile__("movl %%cr4, %0":"=r"(cr4));
+
+	if (cr4 & X86_CR4_PSE) {
+		efi_bak_pg_dir_pointer[0].pgd =
+		    swapper_pg_dir[pgd_index(0)].pgd;
+		swapper_pg_dir[0].pgd =
+		    swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
+	} else {
+		efi_bak_pg_dir_pointer[0].pgd =
+		    swapper_pg_dir[pgd_index(0)].pgd;
+		efi_bak_pg_dir_pointer[1].pgd =
+		    swapper_pg_dir[pgd_index(0x400000)].pgd;
+		swapper_pg_dir[pgd_index(0)].pgd =
+		    swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
+		temp = PAGE_OFFSET + 0x400000;
+		swapper_pg_dir[pgd_index(0x400000)].pgd =
+		    swapper_pg_dir[pgd_index(temp)].pgd;
+	}
+
+	/*
+	 * After the lock is released, the original page table is restored.
+	 */
+	local_flush_tlb();
+
+	cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
+	__asm__ __volatile__("lgdt %0":"=m"
+			    (*(struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0])));
+}
+
+static void efi_call_phys_epilog(void)
+{
+	unsigned long cr4;
+
+	cpu_gdt_descr[0].address =
+		(unsigned long) __va(cpu_gdt_descr[0].address);
+	__asm__ __volatile__("lgdt %0":"=m"(cpu_gdt_descr));
+	__asm__ __volatile__("movl %%cr4, %0":"=r"(cr4));
+
+	if (cr4 & X86_CR4_PSE) {
+		swapper_pg_dir[pgd_index(0)].pgd =
+		    efi_bak_pg_dir_pointer[0].pgd;
+	} else {
+		swapper_pg_dir[pgd_index(0)].pgd =
+		    efi_bak_pg_dir_pointer[0].pgd;
+		swapper_pg_dir[pgd_index(0x400000)].pgd =
+		    efi_bak_pg_dir_pointer[1].pgd;
+	}
+
+	/*
+	 * After the lock is released, the original page table is restored.
+	 */
+	local_flush_tlb();
+
+	local_irq_restore(efi_rt_eflags);
+	spin_unlock(&efi_rt_lock);
+}
+
+static efi_status_t
+phys_efi_set_virtual_address_map(unsigned long memory_map_size,
+				 unsigned long descriptor_size,
+				 u32 descriptor_version,
+				 efi_memory_desc_t *virtual_map)
+{
+	efi_status_t status;
+
+	efi_call_phys_prelog();
+	status = efi_call_phys(efi_phys.set_virtual_address_map,
+				     memory_map_size, descriptor_size,
+				     descriptor_version, virtual_map);
+	efi_call_phys_epilog();
+	return status;
+}
+
+static efi_status_t
+phys_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
+{
+	efi_status_t status;
+
+	efi_call_phys_prelog();
+	status = efi_call_phys(efi_phys.get_time, tm, tc);
+	efi_call_phys_epilog();
+	return status;
+}
+
+inline int efi_set_rtc_mmss(unsigned long nowtime)
+{
+	int real_seconds, real_minutes;
+	efi_status_t 	status;
+	efi_time_t 	eft;
+	efi_time_cap_t 	cap;
+
+	spin_lock(&efi_rt_lock);
+	status = efi.get_time(&eft, &cap);
+	spin_unlock(&efi_rt_lock);
+	if (status != EFI_SUCCESS)
+		panic("Ooops, efitime: can't read time!\n");
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+
+	if (((abs(real_minutes - eft.minute) + 15)/30) & 1)
+		real_minutes += 30;
+	real_minutes %= 60;
+
+	eft.minute = real_minutes;
+	eft.second = real_seconds;
+
+	if (status != EFI_SUCCESS) {
+		printk("Ooops: efitime: can't read time!\n");
+		return -1;
+	}
+	return 0;
+}
+/*
+ * This should only be used during kernel init and before runtime
+ * services have been remapped, therefore, we'll need to call in physical
+ * mode.  Note, this call isn't used later, so mark it __init.
+ */
+inline unsigned long __init efi_get_time(void)
+{
+	efi_status_t status;
+	efi_time_t eft;
+	efi_time_cap_t cap;
+
+	status = phys_efi_get_time(&eft, &cap);
+	if (status != EFI_SUCCESS)
+		printk("Oops: efitime: can't read time status: 0x%lx\n",status);
+
+	return mktime(eft.year, eft.month, eft.day, eft.hour,
+			eft.minute, eft.second);
+}
+
+int is_available_memory(efi_memory_desc_t * md)
+{
+	if (!(md->attribute & EFI_MEMORY_WB))
+		return 0;
+
+	switch (md->type) {
+		case EFI_LOADER_CODE:
+		case EFI_LOADER_DATA:
+		case EFI_BOOT_SERVICES_CODE:
+		case EFI_BOOT_SERVICES_DATA:
+		case EFI_CONVENTIONAL_MEMORY:
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * We need to map the EFI memory map again after paging_init().
+ */
+void __init efi_map_memmap(void)
+{
+	memmap.map = NULL;
+
+	memmap.map = (efi_memory_desc_t *)
+		bt_ioremap((unsigned long) memmap.phys_map,
+			(memmap.nr_map * sizeof(efi_memory_desc_t)));
+
+	if (memmap.map == NULL)
+		printk(KERN_ERR PFX "Could not remap the EFI memmap!\n");
+}
+
+#if EFI_DEBUG
+static void __init print_efi_memmap(void)
+{
+	efi_memory_desc_t *md;
+	int i;
+
+	for (i = 0; i < memmap.nr_map; i++) {
+		md = &memmap.map[i];
+		printk(KERN_INFO "mem%02u: type=%u, attr=0x%llx, "
+			"range=[0x%016llx-0x%016llx) (%lluMB)\n",
+			i, md->type, md->attribute, md->phys_addr,
+			md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT),
+			(md->num_pages >> (20 - EFI_PAGE_SHIFT)));
+	}
+}
+#endif  /*  EFI_DEBUG  */
+
+/*
+ * Walks the EFI memory map and calls CALLBACK once for each EFI
+ * memory descriptor that has memory that is available for kernel use.
+ */
+void efi_memmap_walk(efi_freemem_callback_t callback, void *arg)
+{
+	int prev_valid = 0;
+	struct range {
+		unsigned long start;
+		unsigned long end;
+	} prev, curr;
+	efi_memory_desc_t *md;
+	unsigned long start, end;
+	int i;
+
+	for (i = 0; i < memmap.nr_map; i++) {
+		md = &memmap.map[i];
+
+		if ((md->num_pages == 0) || (!is_available_memory(md)))
+			continue;
+
+		curr.start = md->phys_addr;
+		curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT);
+
+		if (!prev_valid) {
+			prev = curr;
+			prev_valid = 1;
+		} else {
+			if (curr.start < prev.start)
+				printk(KERN_INFO PFX "Unordered memory map\n");
+			if (prev.end == curr.start)
+				prev.end = curr.end;
+			else {
+				start =
+				    (unsigned long) (PAGE_ALIGN(prev.start));
+				end = (unsigned long) (prev.end & PAGE_MASK);
+				if ((end > start)
+				    && (*callback) (start, end, arg) < 0)
+					return;
+				prev = curr;
+			}
+		}
+	}
+	if (prev_valid) {
+		start = (unsigned long) PAGE_ALIGN(prev.start);
+		end = (unsigned long) (prev.end & PAGE_MASK);
+		if (end > start)
+			(*callback) (start, end, arg);
+	}
+}
+
+void __init efi_init(void)
+{
+	efi_config_table_t *config_tables;
+	efi_runtime_services_t *runtime;
+	efi_char16_t *c16;
+	char vendor[100] = "unknown";
+	unsigned long num_config_tables;
+	int i = 0;
+
+	memset(&efi, 0, sizeof(efi) );
+	memset(&efi_phys, 0, sizeof(efi_phys));
+
+	efi_phys.systab = EFI_SYSTAB;
+	memmap.phys_map = EFI_MEMMAP;
+	memmap.nr_map = EFI_MEMMAP_SIZE/EFI_MEMDESC_SIZE;
+	memmap.desc_version = EFI_MEMDESC_VERSION;
+
+	efi.systab = (efi_system_table_t *)
+		boot_ioremap((unsigned long) efi_phys.systab,
+			sizeof(efi_system_table_t));
+	/*
+	 * Verify the EFI Table
+	 */
+	if (efi.systab == NULL)
+		printk(KERN_ERR PFX "Woah! Couldn't map the EFI system table.\n");
+	if (efi.systab->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
+		printk(KERN_ERR PFX "Woah! EFI system table signature incorrect\n");
+	if ((efi.systab->hdr.revision ^ EFI_SYSTEM_TABLE_REVISION) >> 16 != 0)
+		printk(KERN_ERR PFX
+		       "Warning: EFI system table major version mismatch: "
+		       "got %d.%02d, expected %d.%02d\n",
+		       efi.systab->hdr.revision >> 16,
+		       efi.systab->hdr.revision & 0xffff,
+		       EFI_SYSTEM_TABLE_REVISION >> 16,
+		       EFI_SYSTEM_TABLE_REVISION & 0xffff);
+	/*
+	 * Grab some details from the system table
+	 */
+	num_config_tables = efi.systab->nr_tables;
+	config_tables = (efi_config_table_t *)efi.systab->tables;
+	runtime = efi.systab->runtime;
+
+	/*
+	 * Show what we know for posterity
+	 */
+	c16 = (efi_char16_t *) boot_ioremap(efi.systab->fw_vendor, 2);
+	if (c16) {
+		for (i = 0; i < sizeof(vendor) && *c16; ++i)
+			vendor[i] = *c16++;
+		vendor[i] = '\0';
+	} else
+		printk(KERN_ERR PFX "Could not map the firmware vendor!\n");
+
+	printk(KERN_INFO PFX "EFI v%u.%.02u by %s \n",
+	       efi.systab->hdr.revision >> 16,
+	       efi.systab->hdr.revision & 0xffff, vendor);
+
+	/*
+	 * Let's see what config tables the firmware passed to us.
+	 */
+	config_tables = (efi_config_table_t *)
+				boot_ioremap((unsigned long) config_tables,
+			        num_config_tables * sizeof(efi_config_table_t));
+
+	if (config_tables == NULL)
+		printk(KERN_ERR PFX "Could not map EFI Configuration Table!\n");
+
+	for (i = 0; i < num_config_tables; i++) {
+		if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) {
+			efi.mps = (void *)config_tables[i].table;
+			printk(KERN_INFO " MPS=0x%lx ", config_tables[i].table);
+		} else
+		    if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) {
+			efi.acpi20 = __va(config_tables[i].table);
+			printk(KERN_INFO " ACPI 2.0=0x%lx ", config_tables[i].table);
+		} else
+		    if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) {
+			efi.acpi = __va(config_tables[i].table);
+			printk(KERN_INFO " ACPI=0x%lx ", config_tables[i].table);
+		} else
+		    if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) {
+			efi.smbios = (void *) config_tables[i].table;
+			printk(KERN_INFO " SMBIOS=0x%lx ", config_tables[i].table);
+		} else
+		    if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) {
+			efi.hcdp = (void *)config_tables[i].table;
+			printk(KERN_INFO " HCDP=0x%lx ", config_tables[i].table);
+		} else
+		    if (efi_guidcmp(config_tables[i].guid, UGA_IO_PROTOCOL_GUID) == 0) {
+			efi.uga = (void *)config_tables[i].table;
+			printk(KERN_INFO " UGA=0x%lx ", config_tables[i].table);
+		}
+	}
+	printk("\n");
+
+	/*
+	 * Check out the runtime services table. We need to map
+	 * the runtime services table so that we can grab the physical
+	 * address of several of the EFI runtime functions, needed to
+	 * set the firmware into virtual mode.
+	 */
+
+	runtime = (efi_runtime_services_t *) boot_ioremap((unsigned long)
+						runtime,
+				      		sizeof(efi_runtime_services_t));
+	if (runtime != NULL) {
+		/*
+	 	 * We will only need *early* access to the following
+		 * two EFI runtime services before set_virtual_address_map
+		 * is invoked.
+ 	 	 */
+		efi_phys.get_time = (efi_get_time_t *) runtime->get_time;
+		efi_phys.set_virtual_address_map =
+			(efi_set_virtual_address_map_t *)
+				runtime->set_virtual_address_map;
+	} else
+		printk(KERN_ERR PFX "Could not map the runtime service table!\n");
+
+	/* Map the EFI memory map for use until paging_init() */
+
+	memmap.map = (efi_memory_desc_t *)
+		boot_ioremap((unsigned long) EFI_MEMMAP, EFI_MEMMAP_SIZE);
+
+	if (memmap.map == NULL)
+		printk(KERN_ERR PFX "Could not map the EFI memory map!\n");
+
+	if (EFI_MEMDESC_SIZE != sizeof(efi_memory_desc_t)) {
+		printk(KERN_WARNING PFX "Warning! Kernel-defined memdesc doesn't "
+			   "match the one from EFI!\n");
+	}
+#if EFI_DEBUG
+	print_efi_memmap();
+#endif
+}
+
+/*
+ * This function will switch the EFI runtime services to virtual mode.
+ * Essentially, look through the EFI memmap and map every region that
+ * has the runtime attribute bit set in its memory descriptor and update
+ * that memory descriptor with the virtual address obtained from ioremap().
+ * This enables the runtime services to be called without having to
+ * thunk back into physical mode for every invocation.
+ */
+
+void __init efi_enter_virtual_mode(void)
+{
+	efi_memory_desc_t *md;
+	efi_status_t status;
+	int i;
+
+	efi.systab = NULL;
+
+	for (i = 0; i < memmap.nr_map; i++) {
+		md = &memmap.map[i];
+
+		if (md->attribute & EFI_MEMORY_RUNTIME) {
+			md->virt_addr =
+				(unsigned long)ioremap(md->phys_addr,
+					md->num_pages << EFI_PAGE_SHIFT);
+			if (!(unsigned long)md->virt_addr) {
+				printk(KERN_ERR PFX "ioremap of 0x%lX failed\n",
+					(unsigned long)md->phys_addr);
+			}
+
+			if (((unsigned long)md->phys_addr <=
+					(unsigned long)efi_phys.systab) &&
+				((unsigned long)efi_phys.systab <
+					md->phys_addr +
+					((unsigned long)md->num_pages <<
+						EFI_PAGE_SHIFT))) {
+				unsigned long addr;
+
+				addr = md->virt_addr - md->phys_addr +
+						(unsigned long)efi_phys.systab;
+				efi.systab = (efi_system_table_t *)addr;
+			}
+		}
+	}
+
+	if (!efi.systab)
+		BUG();
+
+	status = phys_efi_set_virtual_address_map(
+			sizeof(efi_memory_desc_t) * memmap.nr_map,
+			sizeof(efi_memory_desc_t),
+			memmap.desc_version,
+		       	memmap.phys_map);
+
+	if (status != EFI_SUCCESS) {
+		printk (KERN_ALERT "You are screwed! "
+			"Unable to switch EFI into virtual mode "
+			"(status=%lx)\n", status);
+		panic("EFI call to SetVirtualAddressMap() failed!");
+	}
+
+	/*
+	 * Now that EFI is in virtual mode, update the function
+	 * pointers in the runtime service table to the new virtual addresses.
+	 */
+
+	efi.get_time = (efi_get_time_t *) efi.systab->runtime->get_time;
+	efi.set_time = (efi_set_time_t *) efi.systab->runtime->set_time;
+	efi.get_wakeup_time = (efi_get_wakeup_time_t *)
+					efi.systab->runtime->get_wakeup_time;
+	efi.set_wakeup_time = (efi_set_wakeup_time_t *)
+					efi.systab->runtime->set_wakeup_time;
+	efi.get_variable = (efi_get_variable_t *)
+					efi.systab->runtime->get_variable;
+	efi.get_next_variable = (efi_get_next_variable_t *)
+					efi.systab->runtime->get_next_variable;
+	efi.set_variable = (efi_set_variable_t *)
+					efi.systab->runtime->set_variable;
+	efi.get_next_high_mono_count = (efi_get_next_high_mono_count_t *)
+					efi.systab->runtime->get_next_high_mono_count;
+	efi.reset_system = (efi_reset_system_t *)
+					efi.systab->runtime->reset_system;
+}
+
+void __init
+efi_initialize_iomem_resources(struct resource *code_resource,
+			       struct resource *data_resource)
+{
+	struct resource *res;
+	efi_memory_desc_t *md;
+	int i;
+
+	for (i = 0; i < memmap.nr_map; i++) {
+		md = &memmap.map[i];
+
+		if ((md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) >
+		    0x100000000ULL)
+			continue;
+		res = alloc_bootmem_low(sizeof(struct resource));
+		switch (md->type) {
+		case EFI_RESERVED_TYPE:
+			res->name = "Reserved Memory";
+			break;
+		case EFI_LOADER_CODE:
+			res->name = "Loader Code";
+			break;
+		case EFI_LOADER_DATA:
+			res->name = "Loader Data";
+			break;
+		case EFI_BOOT_SERVICES_DATA:
+			res->name = "BootServices Data";
+			break;
+		case EFI_BOOT_SERVICES_CODE:
+			res->name = "BootServices Code";
+			break;
+		case EFI_RUNTIME_SERVICES_CODE:
+			res->name = "Runtime Service Code";
+			break;
+		case EFI_RUNTIME_SERVICES_DATA:
+			res->name = "Runtime Service Data";
+			break;
+		case EFI_CONVENTIONAL_MEMORY:
+			res->name = "Conventional Memory";
+			break;
+		case EFI_UNUSABLE_MEMORY:
+			res->name = "Unusable Memory";
+			break;
+		case EFI_ACPI_RECLAIM_MEMORY:
+			res->name = "ACPI Reclaim";
+			break;
+		case EFI_ACPI_MEMORY_NVS:
+			res->name = "ACPI NVS";
+			break;
+		case EFI_MEMORY_MAPPED_IO:
+			res->name = "Memory Mapped IO";
+			break;
+		case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+			res->name = "Memory Mapped IO Port Space";
+			break;
+		default:
+			res->name = "Reserved";
+			break;
+		}
+		res->start = md->phys_addr;
+		res->end = res->start + ((md->num_pages << EFI_PAGE_SHIFT) - 1);
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		if (request_resource(&iomem_resource, res) < 0)
+			printk(KERN_ERR PFX "Failed to allocate res %s : 0x%lx-0x%lx\n",
+				res->name, res->start, res->end);
+		/*
+		 * We don't know which region contains kernel data so we try
+		 * it repeatedly and let the resource manager test it.
+		 */
+		if (md->type == EFI_CONVENTIONAL_MEMORY) {
+			request_resource(res, code_resource);
+			request_resource(res, data_resource);
+		}
+	}
+}
+
+/*
+ * Convenience functions to obtain memory types and attributes
+ */
+
+u32 efi_mem_type(unsigned long phys_addr)
+{
+	efi_memory_desc_t *md;
+	int i;
+
+	for (i = 0; i < memmap.nr_map; i++) {
+		md = &memmap.map[i];
+		if ((md->phys_addr <= phys_addr) && (phys_addr <
+			(md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) ))
+			return md->type;
+	}
+	return 0;
+}
+
+u64 efi_mem_attributes(unsigned long phys_addr)
+{
+	efi_memory_desc_t *md;
+	int i;
+
+	for (i = 0; i < memmap.nr_map; i++) {
+		md = &memmap.map[i];
+		if ((md->phys_addr <= phys_addr) && (phys_addr <
+			(md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) ))
+			return md->attribute;
+	}
+	return 0;
+}
diff --git a/arch/i386/kernel/efi_stub.S b/arch/i386/kernel/efi_stub.S
new file mode 100644
index 000000000000..08c0312d9b6c
--- /dev/null
+++ b/arch/i386/kernel/efi_stub.S
@@ -0,0 +1,124 @@
+/*
+ * EFI call stub for IA32.
+ *
+ * This stub allows us to make EFI calls in physical mode with interrupts
+ * turned off.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * efi_call_phys(void *, ...) is a function with variable parameters.
+ * All the callers of this function assure that all the parameters are 4-bytes.
+ */
+
+/*
+ * In gcc calling convention, EBX, ESP, EBP, ESI and EDI are all callee save.
+ * So we'd better save all of them at the beginning of this function and restore
+ * at the end no matter how many we use, because we can not assure EFI runtime
+ * service functions will comply with gcc calling convention, too.
+ */
+
+.text
+ENTRY(efi_call_phys)
+	/*
+	 * 0. The function can only be called in Linux kernel. So CS has been
+	 * set to 0x0010, DS and SS have been set to 0x0018. In EFI, I found
+	 * the values of these registers are the same. And, the corresponding
+	 * GDT entries are identical. So I will do nothing about segment reg
+	 * and GDT, but change GDT base register in prelog and epilog.
+	 */
+
+	/*
+	 * 1. Now I am running with EIP = <physical address> + PAGE_OFFSET.
+	 * But to make it smoothly switch from virtual mode to flat mode.
+	 * The mapping of lower virtual memory has been created in prelog and
+	 * epilog.
+	 */
+	movl	$1f, %edx
+	subl	$__PAGE_OFFSET, %edx
+	jmp	*%edx
+1:
+
+	/*
+	 * 2. Now on the top of stack is the return
+	 * address in the caller of efi_call_phys(), then parameter 1,
+	 * parameter 2, ..., param n. To make things easy, we save the return
+	 * address of efi_call_phys in a global variable.
+	 */
+	popl	%edx
+	movl	%edx, saved_return_addr
+	/* get the function pointer into ECX*/
+	popl	%ecx
+	movl	%ecx, efi_rt_function_ptr
+	movl	$2f, %edx
+	subl	$__PAGE_OFFSET, %edx
+	pushl	%edx
+
+	/*
+	 * 3. Clear PG bit in %CR0.
+	 */
+	movl	%cr0, %edx
+	andl	$0x7fffffff, %edx
+	movl	%edx, %cr0
+	jmp	1f
+1:
+
+	/*
+	 * 4. Adjust stack pointer.
+	 */
+	subl	$__PAGE_OFFSET, %esp
+
+	/*
+	 * 5. Call the physical function.
+	 */
+	jmp	*%ecx
+
+2:
+	/*
+	 * 6. After EFI runtime service returns, control will return to
+	 * following instruction. We'd better readjust stack pointer first.
+	 */
+	addl	$__PAGE_OFFSET, %esp
+
+	/*
+	 * 7. Restore PG bit
+	 */
+	movl	%cr0, %edx
+	orl	$0x80000000, %edx
+	movl	%edx, %cr0
+	jmp	1f
+1:
+	/*
+	 * 8. Now restore the virtual mode from flat mode by
+	 * adding EIP with PAGE_OFFSET.
+	 */
+	movl	$1f, %edx
+	jmp	*%edx
+1:
+
+	/*
+	 * 9. Balance the stack. And because EAX contain the return value,
+	 * we'd better not clobber it.
+	 */
+	leal	efi_rt_function_ptr, %edx
+	movl	(%edx), %ecx
+	pushl	%ecx
+
+	/*
+	 * 10. Push the saved return address onto the stack and return.
+	 */
+	leal	saved_return_addr, %edx
+	movl	(%edx), %ecx
+	pushl	%ecx
+	ret
+.previous
+
+.data
+saved_return_addr:
+	.long 0
+efi_rt_function_ptr:
+	.long 0
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
new file mode 100644
index 000000000000..1e45ff292bc9
--- /dev/null
+++ b/arch/i386/kernel/entry.S
@@ -0,0 +1,950 @@
+/*
+ *  linux/arch/i386/entry.S
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * I changed all the .align's to 4 (16 byte alignment), as that's faster
+ * on a 486.
+ *
+ * Stack layout in 'ret_from_system_call':
+ * 	ptrace needs to have all regs on the stack.
+ *	if the order here is changed, it needs to be
+ *	updated in fork.c:copy_process, signal.c:do_signal,
+ *	ptrace.c and ptrace.h
+ *
+ *	 0(%esp) - %ebx
+ *	 4(%esp) - %ecx
+ *	 8(%esp) - %edx
+ *       C(%esp) - %esi
+ *	10(%esp) - %edi
+ *	14(%esp) - %ebp
+ *	18(%esp) - %eax
+ *	1C(%esp) - %ds
+ *	20(%esp) - %es
+ *	24(%esp) - orig_eax
+ *	28(%esp) - %eip
+ *	2C(%esp) - %cs
+ *	30(%esp) - %eflags
+ *	34(%esp) - %oldesp
+ *	38(%esp) - %oldss
+ *
+ * "current" is in register %ebx during any slow entries.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/desc.h>
+#include "irq_vectors.h"
+
+#define nr_syscalls ((syscall_table_size)/4)
+
+EBX		= 0x00
+ECX		= 0x04
+EDX		= 0x08
+ESI		= 0x0C
+EDI		= 0x10
+EBP		= 0x14
+EAX		= 0x18
+DS		= 0x1C
+ES		= 0x20
+ORIG_EAX	= 0x24
+EIP		= 0x28
+CS		= 0x2C
+EFLAGS		= 0x30
+OLDESP		= 0x34
+OLDSS		= 0x38
+
+CF_MASK		= 0x00000001
+TF_MASK		= 0x00000100
+IF_MASK		= 0x00000200
+DF_MASK		= 0x00000400 
+NT_MASK		= 0x00004000
+VM_MASK		= 0x00020000
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop		cli
+#else
+#define preempt_stop
+#define resume_kernel		restore_nocheck
+#endif
+
+#define SAVE_ALL \
+	cld; \
+	pushl %es; \
+	pushl %ds; \
+	pushl %eax; \
+	pushl %ebp; \
+	pushl %edi; \
+	pushl %esi; \
+	pushl %edx; \
+	pushl %ecx; \
+	pushl %ebx; \
+	movl $(__USER_DS), %edx; \
+	movl %edx, %ds; \
+	movl %edx, %es;
+
+#define RESTORE_INT_REGS \
+	popl %ebx;	\
+	popl %ecx;	\
+	popl %edx;	\
+	popl %esi;	\
+	popl %edi;	\
+	popl %ebp;	\
+	popl %eax
+
+#define RESTORE_REGS	\
+	RESTORE_INT_REGS; \
+1:	popl %ds;	\
+2:	popl %es;	\
+.section .fixup,"ax";	\
+3:	movl $0,(%esp);	\
+	jmp 1b;		\
+4:	movl $0,(%esp);	\
+	jmp 2b;		\
+.previous;		\
+.section __ex_table,"a";\
+	.align 4;	\
+	.long 1b,3b;	\
+	.long 2b,4b;	\
+.previous
+
+
+ENTRY(ret_from_fork)
+	pushl %eax
+	call schedule_tail
+	GET_THREAD_INFO(%ebp)
+	popl %eax
+	jmp syscall_exit
+
+/*
+ * Return to user mode is not as complex as all this looks,
+ * but we want the default path for a system call return to
+ * go as quickly as possible which is why some of this is
+ * less clear than it otherwise should be.
+ */
+
+	# userspace resumption stub bypassing syscall exit tracing
+	ALIGN
+ret_from_exception:
+	preempt_stop
+ret_from_intr:
+	GET_THREAD_INFO(%ebp)
+	movl EFLAGS(%esp), %eax		# mix EFLAGS and CS
+	movb CS(%esp), %al
+	testl $(VM_MASK | 3), %eax
+	jz resume_kernel
+ENTRY(resume_userspace)
+ 	cli				# make sure we don't miss an interrupt
+					# setting need_resched or sigpending
+					# between sampling and the iret
+	movl TI_flags(%ebp), %ecx
+	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done on
+					# int/exception return?
+	jne work_pending
+	jmp restore_all
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+	cli
+	cmpl $0,TI_preempt_count(%ebp)	# non-zero preempt_count ?
+	jnz restore_nocheck
+need_resched:
+	movl TI_flags(%ebp), %ecx	# need_resched set ?
+	testb $_TIF_NEED_RESCHED, %cl
+	jz restore_all
+	testl $IF_MASK,EFLAGS(%esp)     # interrupts off (exception path) ?
+	jz restore_all
+	call preempt_schedule_irq
+	jmp need_resched
+#endif
+
+/* SYSENTER_RETURN points to after the "sysenter" instruction in
+   the vsyscall page.  See vsyscall-sysentry.S, which defines the symbol.  */
+
+	# sysenter call handler stub
+ENTRY(sysenter_entry)
+	movl TSS_sysenter_esp0(%esp),%esp
+sysenter_past_esp:
+	sti
+	pushl $(__USER_DS)
+	pushl %ebp
+	pushfl
+	pushl $(__USER_CS)
+	pushl $SYSENTER_RETURN
+
+/*
+ * Load the potential sixth argument from user stack.
+ * Careful about security.
+ */
+	cmpl $__PAGE_OFFSET-3,%ebp
+	jae syscall_fault
+1:	movl (%ebp),%ebp
+.section __ex_table,"a"
+	.align 4
+	.long 1b,syscall_fault
+.previous
+
+	pushl %eax
+	SAVE_ALL
+	GET_THREAD_INFO(%ebp)
+
+	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
+	testw $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
+	jnz syscall_trace_entry
+	cmpl $(nr_syscalls), %eax
+	jae syscall_badsys
+	call *sys_call_table(,%eax,4)
+	movl %eax,EAX(%esp)
+	cli
+	movl TI_flags(%ebp), %ecx
+	testw $_TIF_ALLWORK_MASK, %cx
+	jne syscall_exit_work
+/* if something modifies registers it must also disable sysexit */
+	movl EIP(%esp), %edx
+	movl OLDESP(%esp), %ecx
+	xorl %ebp,%ebp
+	sti
+	sysexit
+
+
+	# system call handler stub
+ENTRY(system_call)
+	pushl %eax			# save orig_eax
+	SAVE_ALL
+	GET_THREAD_INFO(%ebp)
+					# system call tracing in operation
+	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
+	testw $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
+	jnz syscall_trace_entry
+	cmpl $(nr_syscalls), %eax
+	jae syscall_badsys
+syscall_call:
+	call *sys_call_table(,%eax,4)
+	movl %eax,EAX(%esp)		# store the return value
+syscall_exit:
+	cli				# make sure we don't miss an interrupt
+					# setting need_resched or sigpending
+					# between sampling and the iret
+	movl TI_flags(%ebp), %ecx
+	testw $_TIF_ALLWORK_MASK, %cx	# current->work
+	jne syscall_exit_work
+
+restore_all:
+	movl EFLAGS(%esp), %eax		# mix EFLAGS, SS and CS
+	movb OLDSS(%esp), %ah
+	movb CS(%esp), %al
+	andl $(VM_MASK | (4 << 8) | 3), %eax
+	cmpl $((4 << 8) | 3), %eax
+	je ldt_ss			# returning to user-space with LDT SS
+restore_nocheck:
+	RESTORE_REGS
+	addl $4, %esp
+1:	iret
+.section .fixup,"ax"
+iret_exc:
+	sti
+	movl $__USER_DS, %edx
+	movl %edx, %ds
+	movl %edx, %es
+	movl $11,%eax
+	call do_exit
+.previous
+.section __ex_table,"a"
+	.align 4
+	.long 1b,iret_exc
+.previous
+
+ldt_ss:
+	larl OLDSS(%esp), %eax
+	jnz restore_nocheck
+	testl $0x00400000, %eax		# returning to 32bit stack?
+	jnz restore_nocheck		# allright, normal return
+	/* If returning to userspace with 16bit stack,
+	 * try to fix the higher word of ESP, as the CPU
+	 * won't restore it.
+	 * This is an "official" bug of all the x86-compatible
+	 * CPUs, which we can try to work around to make
+	 * dosemu and wine happy. */
+	subl $8, %esp		# reserve space for switch16 pointer
+	cli
+	movl %esp, %eax
+	/* Set up the 16bit stack frame with switch32 pointer on top,
+	 * and a switch16 pointer on top of the current frame. */
+	call setup_x86_bogus_stack
+	RESTORE_REGS
+	lss 20+4(%esp), %esp	# switch to 16bit stack
+1:	iret
+.section __ex_table,"a"
+	.align 4
+	.long 1b,iret_exc
+.previous
+
+	# perform work that needs to be done immediately before resumption
+	ALIGN
+work_pending:
+	testb $_TIF_NEED_RESCHED, %cl
+	jz work_notifysig
+work_resched:
+	call schedule
+	cli				# make sure we don't miss an interrupt
+					# setting need_resched or sigpending
+					# between sampling and the iret
+	movl TI_flags(%ebp), %ecx
+	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done other
+					# than syscall tracing?
+	jz restore_all
+	testb $_TIF_NEED_RESCHED, %cl
+	jnz work_resched
+
+work_notifysig:				# deal with pending signals and
+					# notify-resume requests
+	testl $VM_MASK, EFLAGS(%esp)
+	movl %esp, %eax
+	jne work_notifysig_v86		# returning to kernel-space or
+					# vm86-space
+	xorl %edx, %edx
+	call do_notify_resume
+	jmp restore_all
+
+	ALIGN
+work_notifysig_v86:
+	pushl %ecx			# save ti_flags for do_notify_resume
+	call save_v86_state		# %eax contains pt_regs pointer
+	popl %ecx
+	movl %eax, %esp
+	xorl %edx, %edx
+	call do_notify_resume
+	jmp restore_all
+
+	# perform syscall exit tracing
+	ALIGN
+syscall_trace_entry:
+	movl $-ENOSYS,EAX(%esp)
+	movl %esp, %eax
+	xorl %edx,%edx
+	call do_syscall_trace
+	movl ORIG_EAX(%esp), %eax
+	cmpl $(nr_syscalls), %eax
+	jnae syscall_call
+	jmp syscall_exit
+
+	# perform syscall exit tracing
+	ALIGN
+syscall_exit_work:
+	testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
+	jz work_pending
+	sti				# could let do_syscall_trace() call
+					# schedule() instead
+	movl %esp, %eax
+	movl $1, %edx
+	call do_syscall_trace
+	jmp resume_userspace
+
+	ALIGN
+syscall_fault:
+	pushl %eax			# save orig_eax
+	SAVE_ALL
+	GET_THREAD_INFO(%ebp)
+	movl $-EFAULT,EAX(%esp)
+	jmp resume_userspace
+
+	ALIGN
+syscall_badsys:
+	movl $-ENOSYS,EAX(%esp)
+	jmp resume_userspace
+
+#define FIXUP_ESPFIX_STACK \
+	movl %esp, %eax; \
+	/* switch to 32bit stack using the pointer on top of 16bit stack */ \
+	lss %ss:CPU_16BIT_STACK_SIZE-8, %esp; \
+	/* copy data from 16bit stack to 32bit stack */ \
+	call fixup_x86_bogus_stack; \
+	/* put ESP to the proper location */ \
+	movl %eax, %esp;
+#define UNWIND_ESPFIX_STACK \
+	pushl %eax; \
+	movl %ss, %eax; \
+	/* see if on 16bit stack */ \
+	cmpw $__ESPFIX_SS, %ax; \
+	jne 28f; \
+	movl $__KERNEL_DS, %edx; \
+	movl %edx, %ds; \
+	movl %edx, %es; \
+	/* switch to 32bit stack */ \
+	FIXUP_ESPFIX_STACK \
+28:	popl %eax;
+
+/*
+ * Build the entry stubs and pointer table with
+ * some assembler magic.
+ */
+.data
+ENTRY(interrupt)
+.text
+
+vector=0
+ENTRY(irq_entries_start)
+.rept NR_IRQS
+	ALIGN
+1:	pushl $vector-256
+	jmp common_interrupt
+.data
+	.long 1b
+.text
+vector=vector+1
+.endr
+
+	ALIGN
+common_interrupt:
+	SAVE_ALL
+	movl %esp,%eax
+	call do_IRQ
+	jmp ret_from_intr
+
+#define BUILD_INTERRUPT(name, nr)	\
+ENTRY(name)				\
+	pushl $nr-256;			\
+	SAVE_ALL			\
+	movl %esp,%eax;			\
+	call smp_/**/name;		\
+	jmp ret_from_intr;
+
+/* The include is where all of the SMP etc. interrupts come from */
+#include "entry_arch.h"
+
+ENTRY(divide_error)
+	pushl $0			# no error code
+	pushl $do_divide_error
+	ALIGN
+error_code:
+	pushl %ds
+	pushl %eax
+	xorl %eax, %eax
+	pushl %ebp
+	pushl %edi
+	pushl %esi
+	pushl %edx
+	decl %eax			# eax = -1
+	pushl %ecx
+	pushl %ebx
+	cld
+	pushl %es
+	UNWIND_ESPFIX_STACK
+	popl %ecx
+	movl ES(%esp), %edi		# get the function address
+	movl ORIG_EAX(%esp), %edx	# get the error code
+	movl %eax, ORIG_EAX(%esp)
+	movl %ecx, ES(%esp)
+	movl $(__USER_DS), %ecx
+	movl %ecx, %ds
+	movl %ecx, %es
+	movl %esp,%eax			# pt_regs pointer
+	call *%edi
+	jmp ret_from_exception
+
+ENTRY(coprocessor_error)
+	pushl $0
+	pushl $do_coprocessor_error
+	jmp error_code
+
+ENTRY(simd_coprocessor_error)
+	pushl $0
+	pushl $do_simd_coprocessor_error
+	jmp error_code
+
+ENTRY(device_not_available)
+	pushl $-1			# mark this as an int
+	SAVE_ALL
+	movl %cr0, %eax
+	testl $0x4, %eax		# EM (math emulation bit)
+	jne device_not_available_emulate
+	preempt_stop
+	call math_state_restore
+	jmp ret_from_exception
+device_not_available_emulate:
+	pushl $0			# temporary storage for ORIG_EIP
+	call math_emulate
+	addl $4, %esp
+	jmp ret_from_exception
+
+/*
+ * Debug traps and NMI can happen at the one SYSENTER instruction
+ * that sets up the real kernel stack. Check here, since we can't
+ * allow the wrong stack to be used.
+ *
+ * "TSS_sysenter_esp0+12" is because the NMI/debug handler will have
+ * already pushed 3 words if it hits on the sysenter instruction:
+ * eflags, cs and eip.
+ *
+ * We just load the right stack, and push the three (known) values
+ * by hand onto the new stack - while updating the return eip past
+ * the instruction that would have done it for sysenter.
+ */
+#define FIX_STACK(offset, ok, label)		\
+	cmpw $__KERNEL_CS,4(%esp);		\
+	jne ok;					\
+label:						\
+	movl TSS_sysenter_esp0+offset(%esp),%esp;	\
+	pushfl;					\
+	pushl $__KERNEL_CS;			\
+	pushl $sysenter_past_esp
+
+ENTRY(debug)
+	cmpl $sysenter_entry,(%esp)
+	jne debug_stack_correct
+	FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
+debug_stack_correct:
+	pushl $-1			# mark this as an int
+	SAVE_ALL
+	xorl %edx,%edx			# error code 0
+	movl %esp,%eax			# pt_regs pointer
+	call do_debug
+	testl %eax,%eax
+	jnz restore_all
+	jmp ret_from_exception
+
+/*
+ * NMI is doubly nasty. It can happen _while_ we're handling
+ * a debug fault, and the debug fault hasn't yet been able to
+ * clear up the stack. So we first check whether we got  an
+ * NMI on the sysenter entry path, but after that we need to
+ * check whether we got an NMI on the debug path where the debug
+ * fault happened on the sysenter path.
+ */
+ENTRY(nmi)
+	pushl %eax
+	movl %ss, %eax
+	cmpw $__ESPFIX_SS, %ax
+	popl %eax
+	je nmi_16bit_stack
+	cmpl $sysenter_entry,(%esp)
+	je nmi_stack_fixup
+	pushl %eax
+	movl %esp,%eax
+	/* Do not access memory above the end of our stack page,
+	 * it might not exist.
+	 */
+	andl $(THREAD_SIZE-1),%eax
+	cmpl $(THREAD_SIZE-20),%eax
+	popl %eax
+	jae nmi_stack_correct
+	cmpl $sysenter_entry,12(%esp)
+	je nmi_debug_stack_check
+nmi_stack_correct:
+	pushl %eax
+	SAVE_ALL
+	xorl %edx,%edx		# zero error code
+	movl %esp,%eax		# pt_regs pointer
+	call do_nmi
+	jmp restore_all
+
+nmi_stack_fixup:
+	FIX_STACK(12,nmi_stack_correct, 1)
+	jmp nmi_stack_correct
+nmi_debug_stack_check:
+	cmpw $__KERNEL_CS,16(%esp)
+	jne nmi_stack_correct
+	cmpl $debug - 1,(%esp)
+	jle nmi_stack_correct
+	cmpl $debug_esp_fix_insn,(%esp)
+	jle nmi_debug_stack_fixup
+nmi_debug_stack_fixup:
+	FIX_STACK(24,nmi_stack_correct, 1)
+	jmp nmi_stack_correct
+
+nmi_16bit_stack:
+	/* create the pointer to lss back */
+	pushl %ss
+	pushl %esp
+	movzwl %sp, %esp
+	addw $4, (%esp)
+	/* copy the iret frame of 12 bytes */
+	.rept 3
+	pushl 16(%esp)
+	.endr
+	pushl %eax
+	SAVE_ALL
+	FIXUP_ESPFIX_STACK		# %eax == %esp
+	xorl %edx,%edx			# zero error code
+	call do_nmi
+	RESTORE_REGS
+	lss 12+4(%esp), %esp		# back to 16bit stack
+1:	iret
+.section __ex_table,"a"
+	.align 4
+	.long 1b,iret_exc
+.previous
+
+ENTRY(int3)
+	pushl $-1			# mark this as an int
+	SAVE_ALL
+	xorl %edx,%edx		# zero error code
+	movl %esp,%eax		# pt_regs pointer
+	call do_int3
+	testl %eax,%eax
+	jnz restore_all
+	jmp ret_from_exception
+
+ENTRY(overflow)
+	pushl $0
+	pushl $do_overflow
+	jmp error_code
+
+ENTRY(bounds)
+	pushl $0
+	pushl $do_bounds
+	jmp error_code
+
+ENTRY(invalid_op)
+	pushl $0
+	pushl $do_invalid_op
+	jmp error_code
+
+ENTRY(coprocessor_segment_overrun)
+	pushl $0
+	pushl $do_coprocessor_segment_overrun
+	jmp error_code
+
+ENTRY(invalid_TSS)
+	pushl $do_invalid_TSS
+	jmp error_code
+
+ENTRY(segment_not_present)
+	pushl $do_segment_not_present
+	jmp error_code
+
+ENTRY(stack_segment)
+	pushl $do_stack_segment
+	jmp error_code
+
+ENTRY(general_protection)
+	pushl $do_general_protection
+	jmp error_code
+
+ENTRY(alignment_check)
+	pushl $do_alignment_check
+	jmp error_code
+
+ENTRY(page_fault)
+	pushl $do_page_fault
+	jmp error_code
+
+#ifdef CONFIG_X86_MCE
+ENTRY(machine_check)
+	pushl $0
+	pushl machine_check_vector
+	jmp error_code
+#endif
+
+ENTRY(spurious_interrupt_bug)
+	pushl $0
+	pushl $do_spurious_interrupt_bug
+	jmp error_code
+
+.data
+ENTRY(sys_call_table)
+	.long sys_restart_syscall	/* 0 - old "setup()" system call, used for restarting */
+	.long sys_exit
+	.long sys_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open		/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink	/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod		/* 15 */
+	.long sys_lchown16
+	.long sys_ni_syscall	/* old break syscall holder */
+	.long sys_stat
+	.long sys_lseek
+	.long sys_getpid	/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_setuid16
+	.long sys_getuid16
+	.long sys_stime		/* 25 */
+	.long sys_ptrace
+	.long sys_alarm
+	.long sys_fstat
+	.long sys_pause
+	.long sys_utime		/* 30 */
+	.long sys_ni_syscall	/* old stty syscall holder */
+	.long sys_ni_syscall	/* old gtty syscall holder */
+	.long sys_access
+	.long sys_nice
+	.long sys_ni_syscall	/* 35 - old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir		/* 40 */
+	.long sys_dup
+	.long sys_pipe
+	.long sys_times
+	.long sys_ni_syscall	/* old prof syscall holder */
+	.long sys_brk		/* 45 */
+	.long sys_setgid16
+	.long sys_getgid16
+	.long sys_signal
+	.long sys_geteuid16
+	.long sys_getegid16	/* 50 */
+	.long sys_acct
+	.long sys_umount	/* recycled never used phys() */
+	.long sys_ni_syscall	/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl		/* 55 */
+	.long sys_ni_syscall	/* old mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall	/* old ulimit syscall holder */
+	.long sys_olduname
+	.long sys_umask		/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp	/* 65 */
+	.long sys_setsid
+	.long sys_sigaction
+	.long sys_sgetmask
+	.long sys_ssetmask
+	.long sys_setreuid16	/* 70 */
+	.long sys_setregid16
+	.long sys_sigsuspend
+	.long sys_sigpending
+	.long sys_sethostname
+	.long sys_setrlimit	/* 75 */
+	.long sys_old_getrlimit
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_getgroups16	/* 80 */
+	.long sys_setgroups16
+	.long old_select
+	.long sys_symlink
+	.long sys_lstat
+	.long sys_readlink	/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long old_readdir
+	.long old_mmap		/* 90 */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_fchown16	/* 95 */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall	/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs	/* 100 */
+	.long sys_ioperm
+	.long sys_socketcall
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer	/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_uname
+	.long sys_iopl		/* 110 */
+	.long sys_vhangup
+	.long sys_ni_syscall	/* old "idle" system call */
+	.long sys_vm86old
+	.long sys_wait4
+	.long sys_swapoff	/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc
+	.long sys_fsync
+	.long sys_sigreturn
+	.long sys_clone		/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_modify_ldt
+	.long sys_adjtimex
+	.long sys_mprotect	/* 125 */
+	.long sys_sigprocmask
+	.long sys_ni_syscall	/* old "create_module" */ 
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall	/* 130:	old "get_kernel_syms" */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs		/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall	/* reserved for afs_syscall */
+	.long sys_setfsuid16
+	.long sys_setfsgid16
+	.long sys_llseek	/* 140 */
+	.long sys_getdents
+	.long sys_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv		/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock		/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam   /* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min  /* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_setresuid16
+	.long sys_getresuid16	/* 165 */
+	.long sys_vm86
+	.long sys_ni_syscall	/* Old sys_query_module */
+	.long sys_poll
+	.long sys_nfsservctl
+	.long sys_setresgid16	/* 170 */
+	.long sys_getresgid16
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask	/* 175 */
+	.long sys_rt_sigpending
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long sys_rt_sigsuspend
+	.long sys_pread64	/* 180 */
+	.long sys_pwrite64
+	.long sys_chown16
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset	/* 185 */
+	.long sys_sigaltstack
+	.long sys_sendfile
+	.long sys_ni_syscall	/* reserved for streams1 */
+	.long sys_ni_syscall	/* reserved for streams2 */
+	.long sys_vfork		/* 190 */
+	.long sys_getrlimit
+	.long sys_mmap2
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64	/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_lchown
+	.long sys_getuid
+	.long sys_getgid	/* 200 */
+	.long sys_geteuid
+	.long sys_getegid
+	.long sys_setreuid
+	.long sys_setregid
+	.long sys_getgroups	/* 205 */
+	.long sys_setgroups
+	.long sys_fchown
+	.long sys_setresuid
+	.long sys_getresuid
+	.long sys_setresgid	/* 210 */
+	.long sys_getresgid
+	.long sys_chown
+	.long sys_setuid
+	.long sys_setgid
+	.long sys_setfsuid	/* 215 */
+	.long sys_setfsgid
+	.long sys_pivot_root
+	.long sys_mincore
+	.long sys_madvise
+	.long sys_getdents64	/* 220 */
+	.long sys_fcntl64
+	.long sys_ni_syscall	/* reserved for TUX */
+	.long sys_ni_syscall
+	.long sys_gettid
+	.long sys_readahead	/* 225 */
+	.long sys_setxattr
+	.long sys_lsetxattr
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr	/* 230 */
+	.long sys_fgetxattr
+	.long sys_listxattr
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr	/* 235 */
+	.long sys_lremovexattr
+	.long sys_fremovexattr
+	.long sys_tkill
+	.long sys_sendfile64
+	.long sys_futex		/* 240 */
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity
+	.long sys_set_thread_area
+	.long sys_get_thread_area
+	.long sys_io_setup	/* 245 */
+	.long sys_io_destroy
+	.long sys_io_getevents
+	.long sys_io_submit
+	.long sys_io_cancel
+	.long sys_fadvise64	/* 250 */
+	.long sys_ni_syscall
+	.long sys_exit_group
+	.long sys_lookup_dcookie
+	.long sys_epoll_create
+	.long sys_epoll_ctl	/* 255 */
+	.long sys_epoll_wait
+ 	.long sys_remap_file_pages
+ 	.long sys_set_tid_address
+ 	.long sys_timer_create
+ 	.long sys_timer_settime		/* 260 */
+ 	.long sys_timer_gettime
+ 	.long sys_timer_getoverrun
+ 	.long sys_timer_delete
+ 	.long sys_clock_settime
+ 	.long sys_clock_gettime		/* 265 */
+ 	.long sys_clock_getres
+ 	.long sys_clock_nanosleep
+	.long sys_statfs64
+	.long sys_fstatfs64	
+	.long sys_tgkill	/* 270 */
+	.long sys_utimes
+ 	.long sys_fadvise64_64
+	.long sys_ni_syscall	/* sys_vserver */
+	.long sys_mbind
+	.long sys_get_mempolicy
+	.long sys_set_mempolicy
+	.long sys_mq_open
+	.long sys_mq_unlink
+	.long sys_mq_timedsend
+	.long sys_mq_timedreceive	/* 280 */
+	.long sys_mq_notify
+	.long sys_mq_getsetattr
+	.long sys_ni_syscall		/* reserved for kexec */
+	.long sys_waitid
+	.long sys_ni_syscall		/* 285 */ /* available */
+	.long sys_add_key
+	.long sys_request_key
+	.long sys_keyctl
+
+syscall_table_size=(.-sys_call_table)
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
new file mode 100644
index 000000000000..d273fd746192
--- /dev/null
+++ b/arch/i386/kernel/head.S
@@ -0,0 +1,521 @@
+/*
+ *  linux/arch/i386/kernel/head.S -- the 32-bit startup code.
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ *  Enhanced CPU detection and feature setting code by Mike Jagdis
+ *  and Martin Mares, November 1997.
+ */
+
+.text
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/asm_offsets.h>
+#include <asm/setup.h>
+
+/*
+ * References to members of the new_cpu_data structure.
+ */
+
+#define X86		new_cpu_data+CPUINFO_x86
+#define X86_VENDOR	new_cpu_data+CPUINFO_x86_vendor
+#define X86_MODEL	new_cpu_data+CPUINFO_x86_model
+#define X86_MASK	new_cpu_data+CPUINFO_x86_mask
+#define X86_HARD_MATH	new_cpu_data+CPUINFO_hard_math
+#define X86_CPUID	new_cpu_data+CPUINFO_cpuid_level
+#define X86_CAPABILITY	new_cpu_data+CPUINFO_x86_capability
+#define X86_VENDOR_ID	new_cpu_data+CPUINFO_x86_vendor_id
+
+/*
+ * This is how much memory *in addition to the memory covered up to
+ * and including _end* we need mapped initially.  We need one bit for
+ * each possible page, but only in low memory, which means
+ * 2^32/4096/8 = 128K worst case (4G/4G split.)
+ *
+ * Modulo rounding, each megabyte assigned here requires a kilobyte of
+ * memory, which is currently unreclaimed.
+ *
+ * This should be a multiple of a page.
+ */
+#define INIT_MAP_BEYOND_END	(128*1024)
+
+
+/*
+ * 32-bit kernel entrypoint; only used by the boot CPU.  On entry,
+ * %esi points to the real-mode code as a 32-bit pointer.
+ * CS and DS must be 4 GB flat segments, but we don't depend on
+ * any particular GDT layout, because we load our own as soon as we
+ * can.
+ */
+ENTRY(startup_32)
+
+/*
+ * Set segments to known values.
+ */
+	cld
+	lgdt boot_gdt_descr - __PAGE_OFFSET
+	movl $(__BOOT_DS),%eax
+	movl %eax,%ds
+	movl %eax,%es
+	movl %eax,%fs
+	movl %eax,%gs
+
+/*
+ * Clear BSS first so that there are no surprises...
+ * No need to cld as DF is already clear from cld above...
+ */
+	xorl %eax,%eax
+	movl $__bss_start - __PAGE_OFFSET,%edi
+	movl $__bss_stop - __PAGE_OFFSET,%ecx
+	subl %edi,%ecx
+	shrl $2,%ecx
+	rep ; stosl
+
+/*
+ * Initialize page tables.  This creates a PDE and a set of page
+ * tables, which are located immediately beyond _end.  The variable
+ * init_pg_tables_end is set up to point to the first "safe" location.
+ * Mappings are created both at virtual address 0 (identity mapping)
+ * and PAGE_OFFSET for up to _end+sizeof(page tables)+INIT_MAP_BEYOND_END.
+ *
+ * Warning: don't use %esi or the stack in this code.  However, %esp
+ * can be used as a GPR if you really need it...
+ */
+page_pde_offset = (__PAGE_OFFSET >> 20);
+
+	movl $(pg0 - __PAGE_OFFSET), %edi
+	movl $(swapper_pg_dir - __PAGE_OFFSET), %edx
+	movl $0x007, %eax			/* 0x007 = PRESENT+RW+USER */
+10:
+	leal 0x007(%edi),%ecx			/* Create PDE entry */
+	movl %ecx,(%edx)			/* Store identity PDE entry */
+	movl %ecx,page_pde_offset(%edx)		/* Store kernel PDE entry */
+	addl $4,%edx
+	movl $1024, %ecx
+11:
+	stosl
+	addl $0x1000,%eax
+	loop 11b
+	/* End condition: we must map up to and including INIT_MAP_BEYOND_END */
+	/* bytes beyond the end of our own page tables; the +0x007 is the attribute bits */
+	leal (INIT_MAP_BEYOND_END+0x007)(%edi),%ebp
+	cmpl %ebp,%eax
+	jb 10b
+	movl %edi,(init_pg_tables_end - __PAGE_OFFSET)
+
+#ifdef CONFIG_SMP
+	xorl %ebx,%ebx				/* This is the boot CPU (BSP) */
+	jmp 3f
+
+/*
+ * Non-boot CPU entry point; entered from trampoline.S
+ * We can't lgdt here, because lgdt itself uses a data segment, but
+ * we know the trampoline has already loaded the boot_gdt_table GDT
+ * for us.
+ */
+ENTRY(startup_32_smp)
+	cld
+	movl $(__BOOT_DS),%eax
+	movl %eax,%ds
+	movl %eax,%es
+	movl %eax,%fs
+	movl %eax,%gs
+
+/*
+ *	New page tables may be in 4Mbyte page mode and may
+ *	be using the global pages. 
+ *
+ *	NOTE! If we are on a 486 we may have no cr4 at all!
+ *	So we do not try to touch it unless we really have
+ *	some bits in it to set.  This won't work if the BSP
+ *	implements cr4 but this AP does not -- very unlikely
+ *	but be warned!  The same applies to the pse feature
+ *	if not equally supported. --macro
+ *
+ *	NOTE! We have to correct for the fact that we're
+ *	not yet offset PAGE_OFFSET..
+ */
+#define cr4_bits mmu_cr4_features-__PAGE_OFFSET
+	movl cr4_bits,%edx
+	andl %edx,%edx
+	jz 6f
+	movl %cr4,%eax		# Turn on paging options (PSE,PAE,..)
+	orl %edx,%eax
+	movl %eax,%cr4
+
+	btl $5, %eax		# check if PAE is enabled
+	jnc 6f
+
+	/* Check if extended functions are implemented */
+	movl $0x80000000, %eax
+	cpuid
+	cmpl $0x80000000, %eax
+	jbe 6f
+	mov $0x80000001, %eax
+	cpuid
+	/* Execute Disable bit supported? */
+	btl $20, %edx
+	jnc 6f
+
+	/* Setup EFER (Extended Feature Enable Register) */
+	movl $0xc0000080, %ecx
+	rdmsr
+
+	btsl $11, %eax
+	/* Make changes effective */
+	wrmsr
+
+6:
+	/* This is a secondary processor (AP) */
+	xorl %ebx,%ebx
+	incl %ebx
+
+3:
+#endif /* CONFIG_SMP */
+
+/*
+ * Enable paging
+ */
+	movl $swapper_pg_dir-__PAGE_OFFSET,%eax
+	movl %eax,%cr3		/* set the page table pointer.. */
+	movl %cr0,%eax
+	orl $0x80000000,%eax
+	movl %eax,%cr0		/* ..and set paging (PG) bit */
+	ljmp $__BOOT_CS,$1f	/* Clear prefetch and normalize %eip */
+1:
+	/* Set up the stack pointer */
+	lss stack_start,%esp
+
+/*
+ * Initialize eflags.  Some BIOS's leave bits like NT set.  This would
+ * confuse the debugger if this code is traced.
+ * XXX - best to initialize before switching to protected mode.
+ */
+	pushl $0
+	popfl
+
+#ifdef CONFIG_SMP
+	andl %ebx,%ebx
+	jz  1f				/* Initial CPU cleans BSS */
+	jmp checkCPUtype
+1:
+#endif /* CONFIG_SMP */
+
+/*
+ * start system 32-bit setup. We need to re-do some of the things done
+ * in 16-bit mode for the "real" operations.
+ */
+	call setup_idt
+
+/*
+ * Copy bootup parameters out of the way.
+ * Note: %esi still has the pointer to the real-mode data.
+ */
+	movl $boot_params,%edi
+	movl $(PARAM_SIZE/4),%ecx
+	cld
+	rep
+	movsl
+	movl boot_params+NEW_CL_POINTER,%esi
+	andl %esi,%esi
+	jnz 2f			# New command line protocol
+	cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
+	jne 1f
+	movzwl OLD_CL_OFFSET,%esi
+	addl $(OLD_CL_BASE_ADDR),%esi
+2:
+	movl $saved_command_line,%edi
+	movl $(COMMAND_LINE_SIZE/4),%ecx
+	rep
+	movsl
+1:
+checkCPUtype:
+
+	movl $-1,X86_CPUID		#  -1 for no CPUID initially
+
+/* check if it is 486 or 386. */
+/*
+ * XXX - this does a lot of unnecessary setup.  Alignment checks don't
+ * apply at our cpl of 0 and the stack ought to be aligned already, and
+ * we don't need to preserve eflags.
+ */
+
+	movb $3,X86		# at least 386
+	pushfl			# push EFLAGS
+	popl %eax		# get EFLAGS
+	movl %eax,%ecx		# save original EFLAGS
+	xorl $0x240000,%eax	# flip AC and ID bits in EFLAGS
+	pushl %eax		# copy to EFLAGS
+	popfl			# set EFLAGS
+	pushfl			# get new EFLAGS
+	popl %eax		# put it in eax
+	xorl %ecx,%eax		# change in flags
+	pushl %ecx		# restore original EFLAGS
+	popfl
+	testl $0x40000,%eax	# check if AC bit changed
+	je is386
+
+	movb $4,X86		# at least 486
+	testl $0x200000,%eax	# check if ID bit changed
+	je is486
+
+	/* get vendor info */
+	xorl %eax,%eax			# call CPUID with 0 -> return vendor ID
+	cpuid
+	movl %eax,X86_CPUID		# save CPUID level
+	movl %ebx,X86_VENDOR_ID		# lo 4 chars
+	movl %edx,X86_VENDOR_ID+4	# next 4 chars
+	movl %ecx,X86_VENDOR_ID+8	# last 4 chars
+
+	orl %eax,%eax			# do we have processor info as well?
+	je is486
+
+	movl $1,%eax		# Use the CPUID instruction to get CPU type
+	cpuid
+	movb %al,%cl		# save reg for future use
+	andb $0x0f,%ah		# mask processor family
+	movb %ah,X86
+	andb $0xf0,%al		# mask model
+	shrb $4,%al
+	movb %al,X86_MODEL
+	andb $0x0f,%cl		# mask mask revision
+	movb %cl,X86_MASK
+	movl %edx,X86_CAPABILITY
+
+is486:	movl $0x50022,%ecx	# set AM, WP, NE and MP
+	jmp 2f
+
+is386:	movl $2,%ecx		# set MP
+2:	movl %cr0,%eax
+	andl $0x80000011,%eax	# Save PG,PE,ET
+	orl %ecx,%eax
+	movl %eax,%cr0
+
+	call check_x87
+	incb ready
+	lgdt cpu_gdt_descr
+	lidt idt_descr
+	ljmp $(__KERNEL_CS),$1f
+1:	movl $(__KERNEL_DS),%eax	# reload all the segment registers
+	movl %eax,%ss			# after changing gdt.
+
+	movl $(__USER_DS),%eax		# DS/ES contains default USER segment
+	movl %eax,%ds
+	movl %eax,%es
+
+	xorl %eax,%eax			# Clear FS/GS and LDT
+	movl %eax,%fs
+	movl %eax,%gs
+	lldt %ax
+	cld			# gcc2 wants the direction flag cleared at all times
+#ifdef CONFIG_SMP
+	movb ready, %cl	
+	cmpb $1,%cl
+	je 1f			# the first CPU calls start_kernel
+				# all other CPUs call initialize_secondary
+	call initialize_secondary
+	jmp L6
+1:
+#endif /* CONFIG_SMP */
+	call start_kernel
+L6:
+	jmp L6			# main should never return here, but
+				# just in case, we know what happens.
+
+/*
+ * We depend on ET to be correct. This checks for 287/387.
+ */
+check_x87:
+	movb $0,X86_HARD_MATH
+	clts
+	fninit
+	fstsw %ax
+	cmpb $0,%al
+	je 1f
+	movl %cr0,%eax		/* no coprocessor: have to set bits */
+	xorl $4,%eax		/* set EM */
+	movl %eax,%cr0
+	ret
+	ALIGN
+1:	movb $1,X86_HARD_MATH
+	.byte 0xDB,0xE4		/* fsetpm for 287, ignored by 387 */
+	ret
+
+/*
+ *  setup_idt
+ *
+ *  sets up a idt with 256 entries pointing to
+ *  ignore_int, interrupt gates. It doesn't actually load
+ *  idt - that can be done only after paging has been enabled
+ *  and the kernel moved to PAGE_OFFSET. Interrupts
+ *  are enabled elsewhere, when we can be relatively
+ *  sure everything is ok.
+ *
+ *  Warning: %esi is live across this function.
+ */
+setup_idt:
+	lea ignore_int,%edx
+	movl $(__KERNEL_CS << 16),%eax
+	movw %dx,%ax		/* selector = 0x0010 = cs */
+	movw $0x8E00,%dx	/* interrupt gate - dpl=0, present */
+
+	lea idt_table,%edi
+	mov $256,%ecx
+rp_sidt:
+	movl %eax,(%edi)
+	movl %edx,4(%edi)
+	addl $8,%edi
+	dec %ecx
+	jne rp_sidt
+	ret
+
+/* This is the default interrupt "handler" :-) */
+	ALIGN
+ignore_int:
+	cld
+	pushl %eax
+	pushl %ecx
+	pushl %edx
+	pushl %es
+	pushl %ds
+	movl $(__KERNEL_DS),%eax
+	movl %eax,%ds
+	movl %eax,%es
+	pushl 16(%esp)
+	pushl 24(%esp)
+	pushl 32(%esp)
+	pushl 40(%esp)
+	pushl $int_msg
+	call printk
+	addl $(5*4),%esp
+	popl %ds
+	popl %es
+	popl %edx
+	popl %ecx
+	popl %eax
+	iret
+
+/*
+ * Real beginning of normal "text" segment
+ */
+ENTRY(stext)
+ENTRY(_stext)
+
+/*
+ * BSS section
+ */
+.section ".bss.page_aligned","w"
+ENTRY(swapper_pg_dir)
+	.fill 1024,4,0
+ENTRY(empty_zero_page)
+	.fill 4096,1,0
+
+/*
+ * This starts the data section.
+ */
+.data
+
+ENTRY(stack_start)
+	.long init_thread_union+THREAD_SIZE
+	.long __BOOT_DS
+
+ready:	.byte 0
+
+int_msg:
+	.asciz "Unknown interrupt or fault at EIP %p %p %p\n"
+
+/*
+ * The IDT and GDT 'descriptors' are a strange 48-bit object
+ * only used by the lidt and lgdt instructions. They are not
+ * like usual segment descriptors - they consist of a 16-bit
+ * segment size, and 32-bit linear address value:
+ */
+
+.globl boot_gdt_descr
+.globl idt_descr
+.globl cpu_gdt_descr
+
+	ALIGN
+# early boot GDT descriptor (must use 1:1 address mapping)
+	.word 0				# 32 bit align gdt_desc.address
+boot_gdt_descr:
+	.word __BOOT_DS+7
+	.long boot_gdt_table - __PAGE_OFFSET
+
+	.word 0				# 32-bit align idt_desc.address
+idt_descr:
+	.word IDT_ENTRIES*8-1		# idt contains 256 entries
+	.long idt_table
+
+# boot GDT descriptor (later on used by CPU#0):
+	.word 0				# 32 bit align gdt_desc.address
+cpu_gdt_descr:
+	.word GDT_ENTRIES*8-1
+	.long cpu_gdt_table
+
+	.fill NR_CPUS-1,8,0		# space for the other GDT descriptors
+
+/*
+ * The boot_gdt_table must mirror the equivalent in setup.S and is
+ * used only for booting.
+ */
+	.align L1_CACHE_BYTES
+ENTRY(boot_gdt_table)
+	.fill GDT_ENTRY_BOOT_CS,8,0
+	.quad 0x00cf9a000000ffff	/* kernel 4GB code at 0x00000000 */
+	.quad 0x00cf92000000ffff	/* kernel 4GB data at 0x00000000 */
+
+/*
+ * The Global Descriptor Table contains 28 quadwords, per-CPU.
+ */
+	.align PAGE_SIZE_asm
+ENTRY(cpu_gdt_table)
+	.quad 0x0000000000000000	/* NULL descriptor */
+	.quad 0x0000000000000000	/* 0x0b reserved */
+	.quad 0x0000000000000000	/* 0x13 reserved */
+	.quad 0x0000000000000000	/* 0x1b reserved */
+	.quad 0x0000000000000000	/* 0x20 unused */
+	.quad 0x0000000000000000	/* 0x28 unused */
+	.quad 0x0000000000000000	/* 0x33 TLS entry 1 */
+	.quad 0x0000000000000000	/* 0x3b TLS entry 2 */
+	.quad 0x0000000000000000	/* 0x43 TLS entry 3 */
+	.quad 0x0000000000000000	/* 0x4b reserved */
+	.quad 0x0000000000000000	/* 0x53 reserved */
+	.quad 0x0000000000000000	/* 0x5b reserved */
+
+	.quad 0x00cf9a000000ffff	/* 0x60 kernel 4GB code at 0x00000000 */
+	.quad 0x00cf92000000ffff	/* 0x68 kernel 4GB data at 0x00000000 */
+	.quad 0x00cffa000000ffff	/* 0x73 user 4GB code at 0x00000000 */
+	.quad 0x00cff2000000ffff	/* 0x7b user 4GB data at 0x00000000 */
+
+	.quad 0x0000000000000000	/* 0x80 TSS descriptor */
+	.quad 0x0000000000000000	/* 0x88 LDT descriptor */
+
+	/* Segments used for calling PnP BIOS */
+	.quad 0x00c09a0000000000	/* 0x90 32-bit code */
+	.quad 0x00809a0000000000	/* 0x98 16-bit code */
+	.quad 0x0080920000000000	/* 0xa0 16-bit data */
+	.quad 0x0080920000000000	/* 0xa8 16-bit data */
+	.quad 0x0080920000000000	/* 0xb0 16-bit data */
+	/*
+	 * The APM segments have byte granularity and their bases
+	 * and limits are set at run time.
+	 */
+	.quad 0x00409a0000000000	/* 0xb8 APM CS    code */
+	.quad 0x00009a0000000000	/* 0xc0 APM CS 16 code (16 bit) */
+	.quad 0x0040920000000000	/* 0xc8 APM DS    data */
+
+	.quad 0x0000920000000000	/* 0xd0 - ESPFIX 16-bit SS */
+	.quad 0x0000000000000000	/* 0xd8 - unused */
+	.quad 0x0000000000000000	/* 0xe0 - unused */
+	.quad 0x0000000000000000	/* 0xe8 - unused */
+	.quad 0x0000000000000000	/* 0xf0 - unused */
+	.quad 0x0000000000000000	/* 0xf8 - GDT entry 31: double-fault TSS */
+
diff --git a/arch/i386/kernel/i386_ksyms.c b/arch/i386/kernel/i386_ksyms.c
new file mode 100644
index 000000000000..14ec354bec92
--- /dev/null
+++ b/arch/i386/kernel/i386_ksyms.c
@@ -0,0 +1,195 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/user.h>
+#include <linux/elfcore.h>
+#include <linux/mca.h>
+#include <linux/sched.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/pm.h>
+#include <linux/pci.h>
+#include <linux/apm_bios.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/highmem.h>
+#include <linux/time.h>
+
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/mmx.h>
+#include <asm/desc.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/nmi.h>
+#include <asm/ist.h>
+#include <asm/kdebug.h>
+
+extern void dump_thread(struct pt_regs *, struct user *);
+extern spinlock_t rtc_lock;
+
+/* This is definitely a GPL-only symbol */
+EXPORT_SYMBOL_GPL(cpu_gdt_table);
+
+#if defined(CONFIG_APM_MODULE)
+extern void machine_real_restart(unsigned char *, int);
+EXPORT_SYMBOL(machine_real_restart);
+extern void default_idle(void);
+EXPORT_SYMBOL(default_idle);
+#endif
+
+#ifdef CONFIG_SMP
+extern void FASTCALL( __write_lock_failed(rwlock_t *rw));
+extern void FASTCALL( __read_lock_failed(rwlock_t *rw));
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
+extern struct drive_info_struct drive_info;
+EXPORT_SYMBOL(drive_info);
+#endif
+
+extern unsigned long cpu_khz;
+extern unsigned long get_cmos_time(void);
+
+/* platform dependent support */
+EXPORT_SYMBOL(boot_cpu_data);
+#ifdef CONFIG_DISCONTIGMEM
+EXPORT_SYMBOL(node_data);
+EXPORT_SYMBOL(physnode_map);
+#endif
+#ifdef CONFIG_X86_NUMAQ
+EXPORT_SYMBOL(xquad_portio);
+#endif
+EXPORT_SYMBOL(dump_thread);
+EXPORT_SYMBOL(dump_fpu);
+EXPORT_SYMBOL_GPL(kernel_fpu_begin);
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(ioremap_nocache);
+EXPORT_SYMBOL(iounmap);
+EXPORT_SYMBOL(kernel_thread);
+EXPORT_SYMBOL(pm_idle);
+EXPORT_SYMBOL(pm_power_off);
+EXPORT_SYMBOL(get_cmos_time);
+EXPORT_SYMBOL(cpu_khz);
+EXPORT_SYMBOL(apm_info);
+
+EXPORT_SYMBOL(__down_failed);
+EXPORT_SYMBOL(__down_failed_interruptible);
+EXPORT_SYMBOL(__down_failed_trylock);
+EXPORT_SYMBOL(__up_wakeup);
+/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial_copy_generic);
+/* Delay loops */
+EXPORT_SYMBOL(__ndelay);
+EXPORT_SYMBOL(__udelay);
+EXPORT_SYMBOL(__delay);
+EXPORT_SYMBOL(__const_udelay);
+
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+
+EXPORT_SYMBOL(strpbrk);
+EXPORT_SYMBOL(strstr);
+
+EXPORT_SYMBOL(strncpy_from_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__copy_from_user_ll);
+EXPORT_SYMBOL(__copy_to_user_ll);
+EXPORT_SYMBOL(strnlen_user);
+
+EXPORT_SYMBOL(dma_alloc_coherent);
+EXPORT_SYMBOL(dma_free_coherent);
+
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL(pci_mem_start);
+#endif
+
+#ifdef CONFIG_PCI_BIOS
+EXPORT_SYMBOL(pcibios_set_irq_routing);
+EXPORT_SYMBOL(pcibios_get_irq_routing_table);
+#endif
+
+#ifdef CONFIG_X86_USE_3DNOW
+EXPORT_SYMBOL(_mmx_memcpy);
+EXPORT_SYMBOL(mmx_clear_page);
+EXPORT_SYMBOL(mmx_copy_page);
+#endif
+
+#ifdef CONFIG_X86_HT
+EXPORT_SYMBOL(smp_num_siblings);
+EXPORT_SYMBOL(cpu_sibling_map);
+#endif
+
+#ifdef CONFIG_SMP
+EXPORT_SYMBOL(cpu_data);
+EXPORT_SYMBOL(cpu_online_map);
+EXPORT_SYMBOL(cpu_callout_map);
+EXPORT_SYMBOL(__write_lock_failed);
+EXPORT_SYMBOL(__read_lock_failed);
+
+/* Global SMP stuff */
+EXPORT_SYMBOL(smp_call_function);
+
+/* TLB flushing */
+EXPORT_SYMBOL(flush_tlb_page);
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+#endif
+
+#ifdef CONFIG_MCA
+EXPORT_SYMBOL(machine_id);
+#endif
+
+#ifdef CONFIG_VT
+EXPORT_SYMBOL(screen_info);
+#endif
+
+EXPORT_SYMBOL(get_wchan);
+
+EXPORT_SYMBOL(rtc_lock);
+
+EXPORT_SYMBOL_GPL(set_nmi_callback);
+EXPORT_SYMBOL_GPL(unset_nmi_callback);
+
+#undef memcmp
+extern int memcmp(const void *,const void *,__kernel_size_t);
+EXPORT_SYMBOL(memcmp);
+
+EXPORT_SYMBOL(register_die_notifier);
+#ifdef CONFIG_HAVE_DEC_LOCK
+EXPORT_SYMBOL(_atomic_dec_and_lock);
+#endif
+
+EXPORT_SYMBOL(__PAGE_KERNEL);
+
+#ifdef CONFIG_HIGHMEM
+EXPORT_SYMBOL(kmap);
+EXPORT_SYMBOL(kunmap);
+EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_to_page);
+#endif
+
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+EXPORT_SYMBOL(ist_info);
+#endif
+
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/i386/kernel/i387.c b/arch/i386/kernel/i387.c
new file mode 100644
index 000000000000..c55e037f08f7
--- /dev/null
+++ b/arch/i386/kernel/i387.c
@@ -0,0 +1,555 @@
+/*
+ *  linux/arch/i386/kernel/i387.c
+ *
+ *  Copyright (C) 1994 Linus Torvalds
+ *
+ *  Pentium III FXSR, SSE support
+ *  General FPU state handling cleanups
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/math_emu.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_MATH_EMULATION
+#define HAVE_HWFP (boot_cpu_data.hard_math)
+#else
+#define HAVE_HWFP 1
+#endif
+
+static unsigned long mxcsr_feature_mask = 0xffffffff;
+
+void mxcsr_feature_mask_init(void)
+{
+	unsigned long mask = 0;
+	clts();
+	if (cpu_has_fxsr) {
+		memset(&current->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct));
+		asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave)); 
+		mask = current->thread.i387.fxsave.mxcsr_mask;
+		if (mask == 0) mask = 0x0000ffbf;
+	} 
+	mxcsr_feature_mask &= mask;
+	stts();
+}
+
+/*
+ * The _current_ task is using the FPU for the first time
+ * so initialize it and set the mxcsr to its default
+ * value at reset if we support XMM instructions and then
+ * remeber the current task has used the FPU.
+ */
+void init_fpu(struct task_struct *tsk)
+{
+	if (cpu_has_fxsr) {
+		memset(&tsk->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct));
+		tsk->thread.i387.fxsave.cwd = 0x37f;
+		if (cpu_has_xmm)
+			tsk->thread.i387.fxsave.mxcsr = 0x1f80;
+	} else {
+		memset(&tsk->thread.i387.fsave, 0, sizeof(struct i387_fsave_struct));
+		tsk->thread.i387.fsave.cwd = 0xffff037fu;
+		tsk->thread.i387.fsave.swd = 0xffff0000u;
+		tsk->thread.i387.fsave.twd = 0xffffffffu;
+		tsk->thread.i387.fsave.fos = 0xffff0000u;
+	}
+	/* only the device not available exception or ptrace can call init_fpu */
+	set_stopped_child_used_math(tsk);
+}
+
+/*
+ * FPU lazy state save handling.
+ */
+
+void kernel_fpu_begin(void)
+{
+	struct thread_info *thread = current_thread_info();
+
+	preempt_disable();
+	if (thread->status & TS_USEDFPU) {
+		__save_init_fpu(thread->task);
+		return;
+	}
+	clts();
+}
+
+void restore_fpu( struct task_struct *tsk )
+{
+	if ( cpu_has_fxsr ) {
+		asm volatile( "fxrstor %0"
+			      : : "m" (tsk->thread.i387.fxsave) );
+	} else {
+		asm volatile( "frstor %0"
+			      : : "m" (tsk->thread.i387.fsave) );
+	}
+}
+
+/*
+ * FPU tag word conversions.
+ */
+
+static inline unsigned short twd_i387_to_fxsr( unsigned short twd )
+{
+	unsigned int tmp; /* to avoid 16 bit prefixes in the code */
+ 
+	/* Transform each pair of bits into 01 (valid) or 00 (empty) */
+        tmp = ~twd;
+        tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */
+        /* and move the valid bits to the lower byte. */
+        tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
+        tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
+        tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
+        return tmp;
+}
+
+static inline unsigned long twd_fxsr_to_i387( struct i387_fxsave_struct *fxsave )
+{
+	struct _fpxreg *st = NULL;
+	unsigned long tos = (fxsave->swd >> 11) & 7;
+	unsigned long twd = (unsigned long) fxsave->twd;
+	unsigned long tag;
+	unsigned long ret = 0xffff0000u;
+	int i;
+
+#define FPREG_ADDR(f, n)	((void *)&(f)->st_space + (n) * 16);
+
+	for ( i = 0 ; i < 8 ; i++ ) {
+		if ( twd & 0x1 ) {
+			st = FPREG_ADDR( fxsave, (i - tos) & 7 );
+
+			switch ( st->exponent & 0x7fff ) {
+			case 0x7fff:
+				tag = 2;		/* Special */
+				break;
+			case 0x0000:
+				if ( !st->significand[0] &&
+				     !st->significand[1] &&
+				     !st->significand[2] &&
+				     !st->significand[3] ) {
+					tag = 1;	/* Zero */
+				} else {
+					tag = 2;	/* Special */
+				}
+				break;
+			default:
+				if ( st->significand[3] & 0x8000 ) {
+					tag = 0;	/* Valid */
+				} else {
+					tag = 2;	/* Special */
+				}
+				break;
+			}
+		} else {
+			tag = 3;			/* Empty */
+		}
+		ret |= (tag << (2 * i));
+		twd = twd >> 1;
+	}
+	return ret;
+}
+
+/*
+ * FPU state interaction.
+ */
+
+unsigned short get_fpu_cwd( struct task_struct *tsk )
+{
+	if ( cpu_has_fxsr ) {
+		return tsk->thread.i387.fxsave.cwd;
+	} else {
+		return (unsigned short)tsk->thread.i387.fsave.cwd;
+	}
+}
+
+unsigned short get_fpu_swd( struct task_struct *tsk )
+{
+	if ( cpu_has_fxsr ) {
+		return tsk->thread.i387.fxsave.swd;
+	} else {
+		return (unsigned short)tsk->thread.i387.fsave.swd;
+	}
+}
+
+#if 0
+unsigned short get_fpu_twd( struct task_struct *tsk )
+{
+	if ( cpu_has_fxsr ) {
+		return tsk->thread.i387.fxsave.twd;
+	} else {
+		return (unsigned short)tsk->thread.i387.fsave.twd;
+	}
+}
+#endif  /*  0  */
+
+unsigned short get_fpu_mxcsr( struct task_struct *tsk )
+{
+	if ( cpu_has_xmm ) {
+		return tsk->thread.i387.fxsave.mxcsr;
+	} else {
+		return 0x1f80;
+	}
+}
+
+#if 0
+
+void set_fpu_cwd( struct task_struct *tsk, unsigned short cwd )
+{
+	if ( cpu_has_fxsr ) {
+		tsk->thread.i387.fxsave.cwd = cwd;
+	} else {
+		tsk->thread.i387.fsave.cwd = ((long)cwd | 0xffff0000u);
+	}
+}
+
+void set_fpu_swd( struct task_struct *tsk, unsigned short swd )
+{
+	if ( cpu_has_fxsr ) {
+		tsk->thread.i387.fxsave.swd = swd;
+	} else {
+		tsk->thread.i387.fsave.swd = ((long)swd | 0xffff0000u);
+	}
+}
+
+void set_fpu_twd( struct task_struct *tsk, unsigned short twd )
+{
+	if ( cpu_has_fxsr ) {
+		tsk->thread.i387.fxsave.twd = twd_i387_to_fxsr(twd);
+	} else {
+		tsk->thread.i387.fsave.twd = ((long)twd | 0xffff0000u);
+	}
+}
+
+#endif  /*  0  */
+
+/*
+ * FXSR floating point environment conversions.
+ */
+
+static int convert_fxsr_to_user( struct _fpstate __user *buf,
+					struct i387_fxsave_struct *fxsave )
+{
+	unsigned long env[7];
+	struct _fpreg __user *to;
+	struct _fpxreg *from;
+	int i;
+
+	env[0] = (unsigned long)fxsave->cwd | 0xffff0000ul;
+	env[1] = (unsigned long)fxsave->swd | 0xffff0000ul;
+	env[2] = twd_fxsr_to_i387(fxsave);
+	env[3] = fxsave->fip;
+	env[4] = fxsave->fcs | ((unsigned long)fxsave->fop << 16);
+	env[5] = fxsave->foo;
+	env[6] = fxsave->fos;
+
+	if ( __copy_to_user( buf, env, 7 * sizeof(unsigned long) ) )
+		return 1;
+
+	to = &buf->_st[0];
+	from = (struct _fpxreg *) &fxsave->st_space[0];
+	for ( i = 0 ; i < 8 ; i++, to++, from++ ) {
+		unsigned long __user *t = (unsigned long __user *)to;
+		unsigned long *f = (unsigned long *)from;
+
+		if (__put_user(*f, t) ||
+				__put_user(*(f + 1), t + 1) ||
+				__put_user(from->exponent, &to->exponent))
+			return 1;
+	}
+	return 0;
+}
+
+static int convert_fxsr_from_user( struct i387_fxsave_struct *fxsave,
+					  struct _fpstate __user *buf )
+{
+	unsigned long env[7];
+	struct _fpxreg *to;
+	struct _fpreg __user *from;
+	int i;
+
+	if ( __copy_from_user( env, buf, 7 * sizeof(long) ) )
+		return 1;
+
+	fxsave->cwd = (unsigned short)(env[0] & 0xffff);
+	fxsave->swd = (unsigned short)(env[1] & 0xffff);
+	fxsave->twd = twd_i387_to_fxsr((unsigned short)(env[2] & 0xffff));
+	fxsave->fip = env[3];
+	fxsave->fop = (unsigned short)((env[4] & 0xffff0000ul) >> 16);
+	fxsave->fcs = (env[4] & 0xffff);
+	fxsave->foo = env[5];
+	fxsave->fos = env[6];
+
+	to = (struct _fpxreg *) &fxsave->st_space[0];
+	from = &buf->_st[0];
+	for ( i = 0 ; i < 8 ; i++, to++, from++ ) {
+		unsigned long *t = (unsigned long *)to;
+		unsigned long __user *f = (unsigned long __user *)from;
+
+		if (__get_user(*t, f) ||
+				__get_user(*(t + 1), f + 1) ||
+				__get_user(to->exponent, &from->exponent))
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * Signal frame handlers.
+ */
+
+static inline int save_i387_fsave( struct _fpstate __user *buf )
+{
+	struct task_struct *tsk = current;
+
+	unlazy_fpu( tsk );
+	tsk->thread.i387.fsave.status = tsk->thread.i387.fsave.swd;
+	if ( __copy_to_user( buf, &tsk->thread.i387.fsave,
+			     sizeof(struct i387_fsave_struct) ) )
+		return -1;
+	return 1;
+}
+
+static int save_i387_fxsave( struct _fpstate __user *buf )
+{
+	struct task_struct *tsk = current;
+	int err = 0;
+
+	unlazy_fpu( tsk );
+
+	if ( convert_fxsr_to_user( buf, &tsk->thread.i387.fxsave ) )
+		return -1;
+
+	err |= __put_user( tsk->thread.i387.fxsave.swd, &buf->status );
+	err |= __put_user( X86_FXSR_MAGIC, &buf->magic );
+	if ( err )
+		return -1;
+
+	if ( __copy_to_user( &buf->_fxsr_env[0], &tsk->thread.i387.fxsave,
+			     sizeof(struct i387_fxsave_struct) ) )
+		return -1;
+	return 1;
+}
+
+int save_i387( struct _fpstate __user *buf )
+{
+	if ( !used_math() )
+		return 0;
+
+	/* This will cause a "finit" to be triggered by the next
+	 * attempted FPU operation by the 'current' process.
+	 */
+	clear_used_math();
+
+	if ( HAVE_HWFP ) {
+		if ( cpu_has_fxsr ) {
+			return save_i387_fxsave( buf );
+		} else {
+			return save_i387_fsave( buf );
+		}
+	} else {
+		return save_i387_soft( &current->thread.i387.soft, buf );
+	}
+}
+
+static inline int restore_i387_fsave( struct _fpstate __user *buf )
+{
+	struct task_struct *tsk = current;
+	clear_fpu( tsk );
+	return __copy_from_user( &tsk->thread.i387.fsave, buf,
+				 sizeof(struct i387_fsave_struct) );
+}
+
+static int restore_i387_fxsave( struct _fpstate __user *buf )
+{
+	int err;
+	struct task_struct *tsk = current;
+	clear_fpu( tsk );
+	err = __copy_from_user( &tsk->thread.i387.fxsave, &buf->_fxsr_env[0],
+				sizeof(struct i387_fxsave_struct) );
+	/* mxcsr reserved bits must be masked to zero for security reasons */
+	tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
+	return err ? 1 : convert_fxsr_from_user( &tsk->thread.i387.fxsave, buf );
+}
+
+int restore_i387( struct _fpstate __user *buf )
+{
+	int err;
+
+	if ( HAVE_HWFP ) {
+		if ( cpu_has_fxsr ) {
+			err = restore_i387_fxsave( buf );
+		} else {
+			err = restore_i387_fsave( buf );
+		}
+	} else {
+		err = restore_i387_soft( &current->thread.i387.soft, buf );
+	}
+	set_used_math();
+	return err;
+}
+
+/*
+ * ptrace request handlers.
+ */
+
+static inline int get_fpregs_fsave( struct user_i387_struct __user *buf,
+				    struct task_struct *tsk )
+{
+	return __copy_to_user( buf, &tsk->thread.i387.fsave,
+			       sizeof(struct user_i387_struct) );
+}
+
+static inline int get_fpregs_fxsave( struct user_i387_struct __user *buf,
+				     struct task_struct *tsk )
+{
+	return convert_fxsr_to_user( (struct _fpstate __user *)buf,
+				     &tsk->thread.i387.fxsave );
+}
+
+int get_fpregs( struct user_i387_struct __user *buf, struct task_struct *tsk )
+{
+	if ( HAVE_HWFP ) {
+		if ( cpu_has_fxsr ) {
+			return get_fpregs_fxsave( buf, tsk );
+		} else {
+			return get_fpregs_fsave( buf, tsk );
+		}
+	} else {
+		return save_i387_soft( &tsk->thread.i387.soft,
+				       (struct _fpstate __user *)buf );
+	}
+}
+
+static inline int set_fpregs_fsave( struct task_struct *tsk,
+				    struct user_i387_struct __user *buf )
+{
+	return __copy_from_user( &tsk->thread.i387.fsave, buf,
+				 sizeof(struct user_i387_struct) );
+}
+
+static inline int set_fpregs_fxsave( struct task_struct *tsk,
+				     struct user_i387_struct __user *buf )
+{
+	return convert_fxsr_from_user( &tsk->thread.i387.fxsave,
+				       (struct _fpstate __user *)buf );
+}
+
+int set_fpregs( struct task_struct *tsk, struct user_i387_struct __user *buf )
+{
+	if ( HAVE_HWFP ) {
+		if ( cpu_has_fxsr ) {
+			return set_fpregs_fxsave( tsk, buf );
+		} else {
+			return set_fpregs_fsave( tsk, buf );
+		}
+	} else {
+		return restore_i387_soft( &tsk->thread.i387.soft,
+					  (struct _fpstate __user *)buf );
+	}
+}
+
+int get_fpxregs( struct user_fxsr_struct __user *buf, struct task_struct *tsk )
+{
+	if ( cpu_has_fxsr ) {
+		if (__copy_to_user( buf, &tsk->thread.i387.fxsave,
+				    sizeof(struct user_fxsr_struct) ))
+			return -EFAULT;
+		return 0;
+	} else {
+		return -EIO;
+	}
+}
+
+int set_fpxregs( struct task_struct *tsk, struct user_fxsr_struct __user *buf )
+{
+	int ret = 0;
+
+	if ( cpu_has_fxsr ) {
+		if (__copy_from_user( &tsk->thread.i387.fxsave, buf,
+				  sizeof(struct user_fxsr_struct) ))
+			ret = -EFAULT;
+		/* mxcsr reserved bits must be masked to zero for security reasons */
+		tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
+	} else {
+		ret = -EIO;
+	}
+	return ret;
+}
+
+/*
+ * FPU state for core dumps.
+ */
+
+static inline void copy_fpu_fsave( struct task_struct *tsk,
+				   struct user_i387_struct *fpu )
+{
+	memcpy( fpu, &tsk->thread.i387.fsave,
+		sizeof(struct user_i387_struct) );
+}
+
+static inline void copy_fpu_fxsave( struct task_struct *tsk,
+				   struct user_i387_struct *fpu )
+{
+	unsigned short *to;
+	unsigned short *from;
+	int i;
+
+	memcpy( fpu, &tsk->thread.i387.fxsave, 7 * sizeof(long) );
+
+	to = (unsigned short *)&fpu->st_space[0];
+	from = (unsigned short *)&tsk->thread.i387.fxsave.st_space[0];
+	for ( i = 0 ; i < 8 ; i++, to += 5, from += 8 ) {
+		memcpy( to, from, 5 * sizeof(unsigned short) );
+	}
+}
+
+int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu )
+{
+	int fpvalid;
+	struct task_struct *tsk = current;
+
+	fpvalid = !!used_math();
+	if ( fpvalid ) {
+		unlazy_fpu( tsk );
+		if ( cpu_has_fxsr ) {
+			copy_fpu_fxsave( tsk, fpu );
+		} else {
+			copy_fpu_fsave( tsk, fpu );
+		}
+	}
+
+	return fpvalid;
+}
+
+int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu)
+{
+	int fpvalid = !!tsk_used_math(tsk);
+
+	if (fpvalid) {
+		if (tsk == current)
+			unlazy_fpu(tsk);
+		if (cpu_has_fxsr)
+			copy_fpu_fxsave(tsk, fpu);
+		else
+			copy_fpu_fsave(tsk, fpu);
+	}
+	return fpvalid;
+}
+
+int dump_task_extended_fpu(struct task_struct *tsk, struct user_fxsr_struct *fpu)
+{
+	int fpvalid = tsk_used_math(tsk) && cpu_has_fxsr;
+
+	if (fpvalid) {
+		if (tsk == current)
+		       unlazy_fpu(tsk);
+		memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(*fpu));
+	}
+	return fpvalid;
+}
diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c
new file mode 100644
index 000000000000..560bef1afb3b
--- /dev/null
+++ b/arch/i386/kernel/i8259.c
@@ -0,0 +1,429 @@
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+
+#include <asm/8253pit.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/timer.h>
+#include <asm/pgtable.h>
+#include <asm/delay.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/arch_hooks.h>
+#include <asm/i8259.h>
+
+#include <linux/irq.h>
+
+#include <io_ports.h>
+
+/*
+ * This is the 'legacy' 8259A Programmable Interrupt Controller,
+ * present in the majority of PC/AT boxes.
+ * plus some generic x86 specific things if generic specifics makes
+ * any sense at all.
+ * this file should become arch/i386/kernel/irq.c when the old irq.c
+ * moves to arch independent land
+ */
+
+DEFINE_SPINLOCK(i8259A_lock);
+
+static void end_8259A_irq (unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) &&
+							irq_desc[irq].action)
+		enable_8259A_irq(irq);
+}
+
+#define shutdown_8259A_irq	disable_8259A_irq
+
+static void mask_and_ack_8259A(unsigned int);
+
+unsigned int startup_8259A_irq(unsigned int irq)
+{ 
+	enable_8259A_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type i8259A_irq_type = {
+	.typename = "XT-PIC",
+	.startup = startup_8259A_irq,
+	.shutdown = shutdown_8259A_irq,
+	.enable = enable_8259A_irq,
+	.disable = disable_8259A_irq,
+	.ack = mask_and_ack_8259A,
+	.end = end_8259A_irq,
+};
+
+/*
+ * 8259A PIC functions to handle ISA devices:
+ */
+
+/*
+ * This contains the irq mask for both 8259A irq controllers,
+ */
+unsigned int cached_irq_mask = 0xffff;
+
+/*
+ * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
+ * boards the timer interrupt is not really connected to any IO-APIC pin,
+ * it's fed to the master 8259A's IR0 line only.
+ *
+ * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
+ * this 'mixed mode' IRQ handling costs nothing because it's only used
+ * at IRQ setup time.
+ */
+unsigned long io_apic_irqs;
+
+void disable_8259A_irq(unsigned int irq)
+{
+	unsigned int mask = 1 << irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	cached_irq_mask |= mask;
+	if (irq & 8)
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+	else
+		outb(cached_master_mask, PIC_MASTER_IMR);
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+void enable_8259A_irq(unsigned int irq)
+{
+	unsigned int mask = ~(1 << irq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	cached_irq_mask &= mask;
+	if (irq & 8)
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+	else
+		outb(cached_master_mask, PIC_MASTER_IMR);
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+int i8259A_irq_pending(unsigned int irq)
+{
+	unsigned int mask = 1<<irq;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	if (irq < 8)
+		ret = inb(PIC_MASTER_CMD) & mask;
+	else
+		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	return ret;
+}
+
+void make_8259A_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	io_apic_irqs &= ~(1<<irq);
+	irq_desc[irq].handler = &i8259A_irq_type;
+	enable_irq(irq);
+}
+
+/*
+ * This function assumes to be called rarely. Switching between
+ * 8259A registers is slow.
+ * This has to be protected by the irq controller spinlock
+ * before being called.
+ */
+static inline int i8259A_irq_real(unsigned int irq)
+{
+	int value;
+	int irqmask = 1<<irq;
+
+	if (irq < 8) {
+		outb(0x0B,PIC_MASTER_CMD);	/* ISR register */
+		value = inb(PIC_MASTER_CMD) & irqmask;
+		outb(0x0A,PIC_MASTER_CMD);	/* back to the IRR register */
+		return value;
+	}
+	outb(0x0B,PIC_SLAVE_CMD);	/* ISR register */
+	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
+	outb(0x0A,PIC_SLAVE_CMD);	/* back to the IRR register */
+	return value;
+}
+
+/*
+ * Careful! The 8259A is a fragile beast, it pretty
+ * much _has_ to be done exactly like this (mask it
+ * first, _then_ send the EOI, and the order of EOI
+ * to the two 8259s is important!
+ */
+static void mask_and_ack_8259A(unsigned int irq)
+{
+	unsigned int irqmask = 1 << irq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+	/*
+	 * Lightweight spurious IRQ detection. We do not want
+	 * to overdo spurious IRQ handling - it's usually a sign
+	 * of hardware problems, so we only do the checks we can
+	 * do without slowing down good hardware unnecesserily.
+	 *
+	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
+	 * usually resulting from the 8259A-1|2 PICs) occur
+	 * even if the IRQ is masked in the 8259A. Thus we
+	 * can check spurious 8259A IRQs without doing the
+	 * quite slow i8259A_irq_real() call for every IRQ.
+	 * This does not cover 100% of spurious interrupts,
+	 * but should be enough to warn the user that there
+	 * is something bad going on ...
+	 */
+	if (cached_irq_mask & irqmask)
+		goto spurious_8259A_irq;
+	cached_irq_mask |= irqmask;
+
+handle_real_irq:
+	if (irq & 8) {
+		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+		outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
+		outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
+	} else {
+		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
+		outb(cached_master_mask, PIC_MASTER_IMR);
+		outb(0x60+irq,PIC_MASTER_CMD);	/* 'Specific EOI to master */
+	}
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+	return;
+
+spurious_8259A_irq:
+	/*
+	 * this is the slow path - should happen rarely.
+	 */
+	if (i8259A_irq_real(irq))
+		/*
+		 * oops, the IRQ _is_ in service according to the
+		 * 8259A - not spurious, go handle it.
+		 */
+		goto handle_real_irq;
+
+	{
+		static int spurious_irq_mask;
+		/*
+		 * At this point we can be sure the IRQ is spurious,
+		 * lets ACK and report it. [once per IRQ]
+		 */
+		if (!(spurious_irq_mask & irqmask)) {
+			printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
+			spurious_irq_mask |= irqmask;
+		}
+		atomic_inc(&irq_err_count);
+		/*
+		 * Theoretically we do not have to handle this IRQ,
+		 * but in Linux this does not cause problems and is
+		 * simpler for us.
+		 */
+		goto handle_real_irq;
+	}
+}
+
+static char irq_trigger[2];
+/**
+ * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
+ */
+static void restore_ELCR(char *trigger)
+{
+	outb(trigger[0], 0x4d0);
+	outb(trigger[1], 0x4d1);
+}
+
+static void save_ELCR(char *trigger)
+{
+	/* IRQ 0,1,2,8,13 are marked as reserved */
+	trigger[0] = inb(0x4d0) & 0xF8;
+	trigger[1] = inb(0x4d1) & 0xDE;
+}
+
+static int i8259A_resume(struct sys_device *dev)
+{
+	init_8259A(0);
+	restore_ELCR(irq_trigger);
+	return 0;
+}
+
+static int i8259A_suspend(struct sys_device *dev, u32 state)
+{
+	save_ELCR(irq_trigger);
+	return 0;
+}
+
+static struct sysdev_class i8259_sysdev_class = {
+	set_kset_name("i8259"),
+	.suspend = i8259A_suspend,
+	.resume = i8259A_resume,
+};
+
+static struct sys_device device_i8259A = {
+	.id	= 0,
+	.cls	= &i8259_sysdev_class,
+};
+
+static int __init i8259A_init_sysfs(void)
+{
+	int error = sysdev_class_register(&i8259_sysdev_class);
+	if (!error)
+		error = sysdev_register(&device_i8259A);
+	return error;
+}
+
+device_initcall(i8259A_init_sysfs);
+
+void init_8259A(int auto_eoi)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
+
+	/*
+	 * outb_p - this has to work on a wide range of PC hardware.
+	 */
+	outb_p(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
+	outb_p(0x20 + 0, PIC_MASTER_IMR);	/* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
+	outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);	/* 8259A-1 (the master) has a slave on IR2 */
+	if (auto_eoi)	/* master does Auto EOI */
+		outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+	else		/* master expects normal EOI */
+		outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+
+	outb_p(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
+	outb_p(0x20 + 8, PIC_SLAVE_IMR);	/* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
+	outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR);	/* 8259A-2 is a slave on master's IR2 */
+	outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+	if (auto_eoi)
+		/*
+		 * in AEOI mode we just have to mask the interrupt
+		 * when acking.
+		 */
+		i8259A_irq_type.ack = disable_8259A_irq;
+	else
+		i8259A_irq_type.ack = mask_and_ack_8259A;
+
+	udelay(100);		/* wait for 8259A to initialize */
+
+	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
+	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+/*
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+ 
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id, struct pt_regs *regs)
+{
+	extern void math_error(void __user *);
+	outb(0,0xF0);
+	if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+		return IRQ_NONE;
+	math_error((void __user *)regs->eip);
+	return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
+ */
+static struct irqaction fpu_irq = { math_error_irq, 0, CPU_MASK_NONE, "fpu", NULL, NULL };
+
+void __init init_ISA_irqs (void)
+{
+	int i;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	init_bsp_APIC();
+#endif
+	init_8259A(0);
+
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 1;
+
+		if (i < 16) {
+			/*
+			 * 16 old-style INTA-cycle interrupts:
+			 */
+			irq_desc[i].handler = &i8259A_irq_type;
+		} else {
+			/*
+			 * 'high' PCI IRQs filled in on demand
+			 */
+			irq_desc[i].handler = &no_irq_type;
+		}
+	}
+}
+
+void __init init_IRQ(void)
+{
+	int i;
+
+	/* all the set up before the call gates are initialised */
+	pre_intr_init_hook();
+
+	/*
+	 * Cover the whole vector space, no vector can escape
+	 * us. (some of these will be overridden and become
+	 * 'special' SMP interrupts)
+	 */
+	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
+		int vector = FIRST_EXTERNAL_VECTOR + i;
+		if (i >= NR_IRQS)
+			break;
+		if (vector != SYSCALL_VECTOR) 
+			set_intr_gate(vector, interrupt[i]);
+	}
+
+	/* setup after call gates are initialised (usually add in
+	 * the architecture specific gates)
+	 */
+	intr_init_hook();
+
+	/*
+	 * Set the clock to HZ Hz, we already have a valid
+	 * vector now:
+	 */
+	setup_pit_timer();
+
+	/*
+	 * External FPU? Set up irq13 if so, for
+	 * original braindamaged IBM FERR coupling.
+	 */
+	if (boot_cpu_data.hard_math && !cpu_has_fpu)
+		setup_irq(FPU_IRQ, &fpu_irq);
+
+	irq_ctx_init(smp_processor_id());
+}
diff --git a/arch/i386/kernel/init_task.c b/arch/i386/kernel/init_task.c
new file mode 100644
index 000000000000..9caa8e8db80c
--- /dev/null
+++ b/arch/i386/kernel/init_task.c
@@ -0,0 +1,46 @@
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union 
+	__attribute__((__section__(".data.init_task"))) =
+		{ INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+
+EXPORT_SYMBOL(init_task);
+
+/*
+ * per-CPU TSS segments. Threads are completely 'soft' on Linux,
+ * no more per-task TSS's.
+ */ 
+DEFINE_PER_CPU(struct tss_struct, init_tss) ____cacheline_maxaligned_in_smp = INIT_TSS;
+
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
new file mode 100644
index 000000000000..9c1350e811d0
--- /dev/null
+++ b/arch/i386/kernel/io_apic.c
@@ -0,0 +1,2545 @@
+/*
+ *	Intel IO-APIC support for multi-Pentium hosts.
+ *
+ *	Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
+ *
+ *	Many thanks to Stig Venaas for trying out countless experimental
+ *	patches and reporting/debugging problems patiently!
+ *
+ *	(c) 1999, Multiple IO-APIC support, developed by
+ *	Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
+ *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
+ *	further tested and cleaned up by Zach Brown <zab@redhat.com>
+ *	and Ingo Molnar <mingo@redhat.com>
+ *
+ *	Fixes
+ *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
+ *					thanks to Eric Gilmore
+ *					and Rolf G. Tews
+ *					for testing these extensively
+ *	Paul Diefenbaugh	:	Added full ACPI support
+ */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/config.h>
+#include <linux/smp_lock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/compiler.h>
+#include <linux/acpi.h>
+
+#include <linux/sysdev.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/desc.h>
+#include <asm/timer.h>
+
+#include <mach_apic.h>
+
+#include "io_ports.h"
+
+int (*ioapic_renumber_irq)(int ioapic, int irq);
+atomic_t irq_mis_count;
+
+static DEFINE_SPINLOCK(ioapic_lock);
+
+/*
+ *	Is the SiS APIC rmw bug present ?
+ *	-1 = don't know, 0 = no, 1 = yes
+ */
+int sis_apic_bug = -1;
+
+/*
+ * # of IRQ routing registers
+ */
+int nr_ioapic_registers[MAX_IO_APICS];
+
+/*
+ * Rough estimation of how many shared IRQs there are, can
+ * be changed anytime.
+ */
+#define MAX_PLUS_SHARED_IRQS NR_IRQS
+#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
+
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * the indexing order of this array favors 1:1 mappings
+ * between pins and IRQs.
+ */
+
+static struct irq_pin_list {
+	int apic, pin, next;
+} irq_2_pin[PIN_MAP_SIZE];
+
+int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1};
+#ifdef CONFIG_PCI_MSI
+#define vector_to_irq(vector) 	\
+	(platform_legacy_irq(vector) ? vector : vector_irq[vector])
+#else
+#define vector_to_irq(vector)	(vector)
+#endif
+
+/*
+ * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
+ * shared ISA-space IRQs, so we have to support them. We are super
+ * fast in the common case, and fast for shared ISA-space IRQs.
+ */
+static void add_pin_to_irq(unsigned int irq, int apic, int pin)
+{
+	static int first_free_entry = NR_IRQS;
+	struct irq_pin_list *entry = irq_2_pin + irq;
+
+	while (entry->next)
+		entry = irq_2_pin + entry->next;
+
+	if (entry->pin != -1) {
+		entry->next = first_free_entry;
+		entry = irq_2_pin + entry->next;
+		if (++first_free_entry >= PIN_MAP_SIZE)
+			panic("io_apic.c: whoops");
+	}
+	entry->apic = apic;
+	entry->pin = pin;
+}
+
+/*
+ * Reroute an IRQ to a different pin.
+ */
+static void __init replace_pin_at_irq(unsigned int irq,
+				      int oldapic, int oldpin,
+				      int newapic, int newpin)
+{
+	struct irq_pin_list *entry = irq_2_pin + irq;
+
+	while (1) {
+		if (entry->apic == oldapic && entry->pin == oldpin) {
+			entry->apic = newapic;
+			entry->pin = newpin;
+		}
+		if (!entry->next)
+			break;
+		entry = irq_2_pin + entry->next;
+	}
+}
+
+static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable)
+{
+	struct irq_pin_list *entry = irq_2_pin + irq;
+	unsigned int pin, reg;
+
+	for (;;) {
+		pin = entry->pin;
+		if (pin == -1)
+			break;
+		reg = io_apic_read(entry->apic, 0x10 + pin*2);
+		reg &= ~disable;
+		reg |= enable;
+		io_apic_modify(entry->apic, 0x10 + pin*2, reg);
+		if (!entry->next)
+			break;
+		entry = irq_2_pin + entry->next;
+	}
+}
+
+/* mask = 1 */
+static void __mask_IO_APIC_irq (unsigned int irq)
+{
+	__modify_IO_APIC_irq(irq, 0x00010000, 0);
+}
+
+/* mask = 0 */
+static void __unmask_IO_APIC_irq (unsigned int irq)
+{
+	__modify_IO_APIC_irq(irq, 0, 0x00010000);
+}
+
+/* mask = 1, trigger = 0 */
+static void __mask_and_edge_IO_APIC_irq (unsigned int irq)
+{
+	__modify_IO_APIC_irq(irq, 0x00010000, 0x00008000);
+}
+
+/* mask = 0, trigger = 1 */
+static void __unmask_and_level_IO_APIC_irq (unsigned int irq)
+{
+	__modify_IO_APIC_irq(irq, 0x00008000, 0x00010000);
+}
+
+static void mask_IO_APIC_irq (unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__mask_IO_APIC_irq(irq);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void unmask_IO_APIC_irq (unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__unmask_IO_APIC_irq(irq);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
+{
+	struct IO_APIC_route_entry entry;
+	unsigned long flags;
+	
+	/* Check delivery_mode to be sure we're not clearing an SMI pin */
+	spin_lock_irqsave(&ioapic_lock, flags);
+	*(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
+	*(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+	if (entry.delivery_mode == dest_SMI)
+		return;
+
+	/*
+	 * Disable it in the IO-APIC irq-routing table:
+	 */
+	memset(&entry, 0, sizeof(entry));
+	entry.mask = 1;
+	spin_lock_irqsave(&ioapic_lock, flags);
+	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0));
+	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1));
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+static void clear_IO_APIC (void)
+{
+	int apic, pin;
+
+	for (apic = 0; apic < nr_ioapics; apic++)
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+			clear_IO_APIC_pin(apic, pin);
+}
+
+static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
+{
+	unsigned long flags;
+	int pin;
+	struct irq_pin_list *entry = irq_2_pin + irq;
+	unsigned int apicid_value;
+	
+	apicid_value = cpu_mask_to_apicid(cpumask);
+	/* Prepare to do the io_apic_write */
+	apicid_value = apicid_value << 24;
+	spin_lock_irqsave(&ioapic_lock, flags);
+	for (;;) {
+		pin = entry->pin;
+		if (pin == -1)
+			break;
+		io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value);
+		if (!entry->next)
+			break;
+		entry = irq_2_pin + entry->next;
+	}
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+#if defined(CONFIG_IRQBALANCE)
+# include <asm/processor.h>	/* kernel_thread() */
+# include <linux/kernel_stat.h>	/* kstat */
+# include <linux/slab.h>		/* kmalloc() */
+# include <linux/timer.h>	/* time_after() */
+ 
+# ifdef CONFIG_BALANCED_IRQ_DEBUG
+#  define TDprintk(x...) do { printk("<%ld:%s:%d>: ", jiffies, __FILE__, __LINE__); printk(x); } while (0)
+#  define Dprintk(x...) do { TDprintk(x); } while (0)
+# else
+#  define TDprintk(x...) 
+#  define Dprintk(x...) 
+# endif
+
+cpumask_t __cacheline_aligned pending_irq_balance_cpumask[NR_IRQS];
+
+#define IRQBALANCE_CHECK_ARCH -999
+static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH;
+static int physical_balance = 0;
+
+static struct irq_cpu_info {
+	unsigned long * last_irq;
+	unsigned long * irq_delta;
+	unsigned long irq;
+} irq_cpu_data[NR_CPUS];
+
+#define CPU_IRQ(cpu)		(irq_cpu_data[cpu].irq)
+#define LAST_CPU_IRQ(cpu,irq)   (irq_cpu_data[cpu].last_irq[irq])
+#define IRQ_DELTA(cpu,irq) 	(irq_cpu_data[cpu].irq_delta[irq])
+
+#define IDLE_ENOUGH(cpu,now) \
+	(idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1))
+
+#define IRQ_ALLOWED(cpu, allowed_mask)	cpu_isset(cpu, allowed_mask)
+
+#define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i]))
+
+#define MAX_BALANCED_IRQ_INTERVAL	(5*HZ)
+#define MIN_BALANCED_IRQ_INTERVAL	(HZ/2)
+#define BALANCED_IRQ_MORE_DELTA		(HZ/10)
+#define BALANCED_IRQ_LESS_DELTA		(HZ)
+
+static long balanced_irq_interval = MAX_BALANCED_IRQ_INTERVAL;
+
+static unsigned long move(int curr_cpu, cpumask_t allowed_mask,
+			unsigned long now, int direction)
+{
+	int search_idle = 1;
+	int cpu = curr_cpu;
+
+	goto inside;
+
+	do {
+		if (unlikely(cpu == curr_cpu))
+			search_idle = 0;
+inside:
+		if (direction == 1) {
+			cpu++;
+			if (cpu >= NR_CPUS)
+				cpu = 0;
+		} else {
+			cpu--;
+			if (cpu == -1)
+				cpu = NR_CPUS-1;
+		}
+	} while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) ||
+			(search_idle && !IDLE_ENOUGH(cpu,now)));
+
+	return cpu;
+}
+
+static inline void balance_irq(int cpu, int irq)
+{
+	unsigned long now = jiffies;
+	cpumask_t allowed_mask;
+	unsigned int new_cpu;
+		
+	if (irqbalance_disabled)
+		return; 
+
+	cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]);
+	new_cpu = move(cpu, allowed_mask, now, 1);
+	if (cpu != new_cpu) {
+		irq_desc_t *desc = irq_desc + irq;
+		unsigned long flags;
+
+		spin_lock_irqsave(&desc->lock, flags);
+		pending_irq_balance_cpumask[irq] = cpumask_of_cpu(new_cpu);
+		spin_unlock_irqrestore(&desc->lock, flags);
+	}
+}
+
+static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold)
+{
+	int i, j;
+	Dprintk("Rotating IRQs among CPUs.\n");
+	for (i = 0; i < NR_CPUS; i++) {
+		for (j = 0; cpu_online(i) && (j < NR_IRQS); j++) {
+			if (!irq_desc[j].action)
+				continue;
+			/* Is it a significant load ?  */
+			if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) <
+						useful_load_threshold)
+				continue;
+			balance_irq(i, j);
+		}
+	}
+	balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
+		balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);	
+	return;
+}
+
+static void do_irq_balance(void)
+{
+	int i, j;
+	unsigned long max_cpu_irq = 0, min_cpu_irq = (~0);
+	unsigned long move_this_load = 0;
+	int max_loaded = 0, min_loaded = 0;
+	int load;
+	unsigned long useful_load_threshold = balanced_irq_interval + 10;
+	int selected_irq;
+	int tmp_loaded, first_attempt = 1;
+	unsigned long tmp_cpu_irq;
+	unsigned long imbalance = 0;
+	cpumask_t allowed_mask, target_cpu_mask, tmp;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		int package_index;
+		CPU_IRQ(i) = 0;
+		if (!cpu_online(i))
+			continue;
+		package_index = CPU_TO_PACKAGEINDEX(i);
+		for (j = 0; j < NR_IRQS; j++) {
+			unsigned long value_now, delta;
+			/* Is this an active IRQ? */
+			if (!irq_desc[j].action)
+				continue;
+			if ( package_index == i )
+				IRQ_DELTA(package_index,j) = 0;
+			/* Determine the total count per processor per IRQ */
+			value_now = (unsigned long) kstat_cpu(i).irqs[j];
+
+			/* Determine the activity per processor per IRQ */
+			delta = value_now - LAST_CPU_IRQ(i,j);
+
+			/* Update last_cpu_irq[][] for the next time */
+			LAST_CPU_IRQ(i,j) = value_now;
+
+			/* Ignore IRQs whose rate is less than the clock */
+			if (delta < useful_load_threshold)
+				continue;
+			/* update the load for the processor or package total */
+			IRQ_DELTA(package_index,j) += delta;
+
+			/* Keep track of the higher numbered sibling as well */
+			if (i != package_index)
+				CPU_IRQ(i) += delta;
+			/*
+			 * We have sibling A and sibling B in the package
+			 *
+			 * cpu_irq[A] = load for cpu A + load for cpu B
+			 * cpu_irq[B] = load for cpu B
+			 */
+			CPU_IRQ(package_index) += delta;
+		}
+	}
+	/* Find the least loaded processor package */
+	for (i = 0; i < NR_CPUS; i++) {
+		if (!cpu_online(i))
+			continue;
+		if (i != CPU_TO_PACKAGEINDEX(i))
+			continue;
+		if (min_cpu_irq > CPU_IRQ(i)) {
+			min_cpu_irq = CPU_IRQ(i);
+			min_loaded = i;
+		}
+	}
+	max_cpu_irq = ULONG_MAX;
+
+tryanothercpu:
+	/* Look for heaviest loaded processor.
+	 * We may come back to get the next heaviest loaded processor.
+	 * Skip processors with trivial loads.
+	 */
+	tmp_cpu_irq = 0;
+	tmp_loaded = -1;
+	for (i = 0; i < NR_CPUS; i++) {
+		if (!cpu_online(i))
+			continue;
+		if (i != CPU_TO_PACKAGEINDEX(i))
+			continue;
+		if (max_cpu_irq <= CPU_IRQ(i)) 
+			continue;
+		if (tmp_cpu_irq < CPU_IRQ(i)) {
+			tmp_cpu_irq = CPU_IRQ(i);
+			tmp_loaded = i;
+		}
+	}
+
+	if (tmp_loaded == -1) {
+ 	 /* In the case of small number of heavy interrupt sources, 
+	  * loading some of the cpus too much. We use Ingo's original 
+	  * approach to rotate them around.
+	  */
+		if (!first_attempt && imbalance >= useful_load_threshold) {
+			rotate_irqs_among_cpus(useful_load_threshold);
+			return;
+		}
+		goto not_worth_the_effort;
+	}
+	
+	first_attempt = 0;		/* heaviest search */
+	max_cpu_irq = tmp_cpu_irq;	/* load */
+	max_loaded = tmp_loaded;	/* processor */
+	imbalance = (max_cpu_irq - min_cpu_irq) / 2;
+	
+	Dprintk("max_loaded cpu = %d\n", max_loaded);
+	Dprintk("min_loaded cpu = %d\n", min_loaded);
+	Dprintk("max_cpu_irq load = %ld\n", max_cpu_irq);
+	Dprintk("min_cpu_irq load = %ld\n", min_cpu_irq);
+	Dprintk("load imbalance = %lu\n", imbalance);
+
+	/* if imbalance is less than approx 10% of max load, then
+	 * observe diminishing returns action. - quit
+	 */
+	if (imbalance < (max_cpu_irq >> 3)) {
+		Dprintk("Imbalance too trivial\n");
+		goto not_worth_the_effort;
+	}
+
+tryanotherirq:
+	/* if we select an IRQ to move that can't go where we want, then
+	 * see if there is another one to try.
+	 */
+	move_this_load = 0;
+	selected_irq = -1;
+	for (j = 0; j < NR_IRQS; j++) {
+		/* Is this an active IRQ? */
+		if (!irq_desc[j].action)
+			continue;
+		if (imbalance <= IRQ_DELTA(max_loaded,j))
+			continue;
+		/* Try to find the IRQ that is closest to the imbalance
+		 * without going over.
+		 */
+		if (move_this_load < IRQ_DELTA(max_loaded,j)) {
+			move_this_load = IRQ_DELTA(max_loaded,j);
+			selected_irq = j;
+		}
+	}
+	if (selected_irq == -1) {
+		goto tryanothercpu;
+	}
+
+	imbalance = move_this_load;
+	
+	/* For physical_balance case, we accumlated both load
+	 * values in the one of the siblings cpu_irq[],
+	 * to use the same code for physical and logical processors
+	 * as much as possible. 
+	 *
+	 * NOTE: the cpu_irq[] array holds the sum of the load for
+	 * sibling A and sibling B in the slot for the lowest numbered
+	 * sibling (A), _AND_ the load for sibling B in the slot for
+	 * the higher numbered sibling.
+	 *
+	 * We seek the least loaded sibling by making the comparison
+	 * (A+B)/2 vs B
+	 */
+	load = CPU_IRQ(min_loaded) >> 1;
+	for_each_cpu_mask(j, cpu_sibling_map[min_loaded]) {
+		if (load > CPU_IRQ(j)) {
+			/* This won't change cpu_sibling_map[min_loaded] */
+			load = CPU_IRQ(j);
+			min_loaded = j;
+		}
+	}
+
+	cpus_and(allowed_mask, cpu_online_map, irq_affinity[selected_irq]);
+	target_cpu_mask = cpumask_of_cpu(min_loaded);
+	cpus_and(tmp, target_cpu_mask, allowed_mask);
+
+	if (!cpus_empty(tmp)) {
+		irq_desc_t *desc = irq_desc + selected_irq;
+		unsigned long flags;
+
+		Dprintk("irq = %d moved to cpu = %d\n",
+				selected_irq, min_loaded);
+		/* mark for change destination */
+		spin_lock_irqsave(&desc->lock, flags);
+		pending_irq_balance_cpumask[selected_irq] =
+					cpumask_of_cpu(min_loaded);
+		spin_unlock_irqrestore(&desc->lock, flags);
+		/* Since we made a change, come back sooner to 
+		 * check for more variation.
+		 */
+		balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL,
+			balanced_irq_interval - BALANCED_IRQ_LESS_DELTA);	
+		return;
+	}
+	goto tryanotherirq;
+
+not_worth_the_effort:
+	/*
+	 * if we did not find an IRQ to move, then adjust the time interval
+	 * upward
+	 */
+	balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL,
+		balanced_irq_interval + BALANCED_IRQ_MORE_DELTA);	
+	Dprintk("IRQ worth rotating not found\n");
+	return;
+}
+
+static int balanced_irq(void *unused)
+{
+	int i;
+	unsigned long prev_balance_time = jiffies;
+	long time_remaining = balanced_irq_interval;
+
+	daemonize("kirqd");
+	
+	/* push everything to CPU 0 to give us a starting point.  */
+	for (i = 0 ; i < NR_IRQS ; i++) {
+		pending_irq_balance_cpumask[i] = cpumask_of_cpu(0);
+	}
+
+	for ( ; ; ) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		time_remaining = schedule_timeout(time_remaining);
+		try_to_freeze(PF_FREEZE);
+		if (time_after(jiffies,
+				prev_balance_time+balanced_irq_interval)) {
+			do_irq_balance();
+			prev_balance_time = jiffies;
+			time_remaining = balanced_irq_interval;
+		}
+	}
+	return 0;
+}
+
+static int __init balanced_irq_init(void)
+{
+	int i;
+	struct cpuinfo_x86 *c;
+	cpumask_t tmp;
+
+	cpus_shift_right(tmp, cpu_online_map, 2);
+        c = &boot_cpu_data;
+	/* When not overwritten by the command line ask subarchitecture. */
+	if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH)
+		irqbalance_disabled = NO_BALANCE_IRQ;
+	if (irqbalance_disabled)
+		return 0;
+	
+	 /* disable irqbalance completely if there is only one processor online */
+	if (num_online_cpus() < 2) {
+		irqbalance_disabled = 1;
+		return 0;
+	}
+	/*
+	 * Enable physical balance only if more than 1 physical processor
+	 * is present
+	 */
+	if (smp_num_siblings > 1 && !cpus_empty(tmp))
+		physical_balance = 1;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		if (!cpu_online(i))
+			continue;
+		irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
+		irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
+		if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) {
+			printk(KERN_ERR "balanced_irq_init: out of memory");
+			goto failed;
+		}
+		memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS);
+		memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS);
+	}
+	
+	printk(KERN_INFO "Starting balanced_irq\n");
+	if (kernel_thread(balanced_irq, NULL, CLONE_KERNEL) >= 0) 
+		return 0;
+	else 
+		printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq");
+failed:
+	for (i = 0; i < NR_CPUS; i++) {
+		if(irq_cpu_data[i].irq_delta)
+			kfree(irq_cpu_data[i].irq_delta);
+		if(irq_cpu_data[i].last_irq)
+			kfree(irq_cpu_data[i].last_irq);
+	}
+	return 0;
+}
+
+int __init irqbalance_disable(char *str)
+{
+	irqbalance_disabled = 1;
+	return 0;
+}
+
+__setup("noirqbalance", irqbalance_disable);
+
+static inline void move_irq(int irq)
+{
+	/* note - we hold the desc->lock */
+	if (unlikely(!cpus_empty(pending_irq_balance_cpumask[irq]))) {
+		set_ioapic_affinity_irq(irq, pending_irq_balance_cpumask[irq]);
+		cpus_clear(pending_irq_balance_cpumask[irq]);
+	}
+}
+
+late_initcall(balanced_irq_init);
+
+#else /* !CONFIG_IRQBALANCE */
+static inline void move_irq(int irq) { }
+#endif /* CONFIG_IRQBALANCE */
+
+#ifndef CONFIG_SMP
+void fastcall send_IPI_self(int vector)
+{
+	unsigned int cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+	cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	apic_write_around(APIC_ICR, cfg);
+}
+#endif /* !CONFIG_SMP */
+
+
+/*
+ * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
+ * specific CPU-side IRQs.
+ */
+
+#define MAX_PIRQS 8
+static int pirq_entries [MAX_PIRQS];
+static int pirqs_enabled;
+int skip_ioapic_setup;
+
+static int __init ioapic_setup(char *str)
+{
+	skip_ioapic_setup = 1;
+	return 1;
+}
+
+__setup("noapic", ioapic_setup);
+
+static int __init ioapic_pirq_setup(char *str)
+{
+	int i, max;
+	int ints[MAX_PIRQS+1];
+
+	get_options(str, ARRAY_SIZE(ints), ints);
+
+	for (i = 0; i < MAX_PIRQS; i++)
+		pirq_entries[i] = -1;
+
+	pirqs_enabled = 1;
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"PIRQ redirection, working around broken MP-BIOS.\n");
+	max = MAX_PIRQS;
+	if (ints[0] < MAX_PIRQS)
+		max = ints[0];
+
+	for (i = 0; i < max; i++) {
+		apic_printk(APIC_VERBOSE, KERN_DEBUG
+				"... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
+		/*
+		 * PIRQs are mapped upside down, usually.
+		 */
+		pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
+	}
+	return 1;
+}
+
+__setup("pirq=", ioapic_pirq_setup);
+
+/*
+ * Find the IRQ entry number of a certain pin.
+ */
+static int find_irq_entry(int apic, int pin, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++)
+		if (mp_irqs[i].mpc_irqtype == type &&
+		    (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
+		     mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
+		    mp_irqs[i].mpc_dstirq == pin)
+			return i;
+
+	return -1;
+}
+
+/*
+ * Find the pin to which IRQ[irq] (ISA) is connected
+ */
+static int find_isa_irq_pin(int irq, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].mpc_srcbus;
+
+		if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+		    ) &&
+		    (mp_irqs[i].mpc_irqtype == type) &&
+		    (mp_irqs[i].mpc_srcbusirq == irq))
+
+			return mp_irqs[i].mpc_dstirq;
+	}
+	return -1;
+}
+
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+static int pin_2_irq(int idx, int apic, int pin);
+
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
+{
+	int apic, i, best_guess = -1;
+
+	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, "
+		"slot:%d, pin:%d.\n", bus, slot, pin);
+	if (mp_bus_id_to_pci_bus[bus] == -1) {
+		printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+		return -1;
+	}
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].mpc_srcbus;
+
+		for (apic = 0; apic < nr_ioapics; apic++)
+			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
+			    mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
+				break;
+
+		if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) &&
+		    !mp_irqs[i].mpc_irqtype &&
+		    (bus == lbus) &&
+		    (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
+
+			if (!(apic || IO_APIC_IRQ(irq)))
+				continue;
+
+			if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
+				return irq;
+			/*
+			 * Use the first all-but-pin matching entry as a
+			 * best-guess fuzzy result for broken mptables.
+			 */
+			if (best_guess < 0)
+				best_guess = irq;
+		}
+	}
+	return best_guess;
+}
+
+/*
+ * This function currently is only a helper for the i386 smp boot process where 
+ * we need to reprogram the ioredtbls to cater for the cpus which have come online
+ * so mask in all cases should simply be TARGET_CPUS
+ */
+void __init setup_ioapic_dest(void)
+{
+	int pin, ioapic, irq, irq_entry;
+
+	if (skip_ioapic_setup == 1)
+		return;
+
+	for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
+		for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+			irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+			if (irq_entry == -1)
+				continue;
+			irq = pin_2_irq(irq_entry, ioapic, pin);
+			set_ioapic_affinity_irq(irq, TARGET_CPUS);
+		}
+
+	}
+}
+
+/*
+ * EISA Edge/Level control register, ELCR
+ */
+static int EISA_ELCR(unsigned int irq)
+{
+	if (irq < 16) {
+		unsigned int port = 0x4d0 + (irq >> 3);
+		return (inb(port) >> (irq & 7)) & 1;
+	}
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"Broken MPtable reports ISA irq %d\n", irq);
+	return 0;
+}
+
+/* EISA interrupts are always polarity zero and can be edge or level
+ * trigger depending on the ELCR value.  If an interrupt is listed as
+ * EISA conforming in the MP table, that means its trigger type must
+ * be read in from the ELCR */
+
+#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
+#define default_EISA_polarity(idx)	(0)
+
+/* ISA interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_ISA_trigger(idx)	(0)
+#define default_ISA_polarity(idx)	(0)
+
+/* PCI interrupts are always polarity one level triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_PCI_trigger(idx)	(1)
+#define default_PCI_polarity(idx)	(1)
+
+/* MCA interrupts are always polarity zero level triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_MCA_trigger(idx)	(1)
+#define default_MCA_polarity(idx)	(0)
+
+/* NEC98 interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_NEC98_trigger(idx)     (0)
+#define default_NEC98_polarity(idx)    (0)
+
+static int __init MPBIOS_polarity(int idx)
+{
+	int bus = mp_irqs[idx].mpc_srcbus;
+	int polarity;
+
+	/*
+	 * Determine IRQ line polarity (high active or low active):
+	 */
+	switch (mp_irqs[idx].mpc_irqflag & 3)
+	{
+		case 0: /* conforms, ie. bus-type dependent polarity */
+		{
+			switch (mp_bus_id_to_type[bus])
+			{
+				case MP_BUS_ISA: /* ISA pin */
+				{
+					polarity = default_ISA_polarity(idx);
+					break;
+				}
+				case MP_BUS_EISA: /* EISA pin */
+				{
+					polarity = default_EISA_polarity(idx);
+					break;
+				}
+				case MP_BUS_PCI: /* PCI pin */
+				{
+					polarity = default_PCI_polarity(idx);
+					break;
+				}
+				case MP_BUS_MCA: /* MCA pin */
+				{
+					polarity = default_MCA_polarity(idx);
+					break;
+				}
+				case MP_BUS_NEC98: /* NEC 98 pin */
+				{
+					polarity = default_NEC98_polarity(idx);
+					break;
+				}
+				default:
+				{
+					printk(KERN_WARNING "broken BIOS!!\n");
+					polarity = 1;
+					break;
+				}
+			}
+			break;
+		}
+		case 1: /* high active */
+		{
+			polarity = 0;
+			break;
+		}
+		case 2: /* reserved */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			polarity = 1;
+			break;
+		}
+		case 3: /* low active */
+		{
+			polarity = 1;
+			break;
+		}
+		default: /* invalid */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			polarity = 1;
+			break;
+		}
+	}
+	return polarity;
+}
+
+static int MPBIOS_trigger(int idx)
+{
+	int bus = mp_irqs[idx].mpc_srcbus;
+	int trigger;
+
+	/*
+	 * Determine IRQ trigger mode (edge or level sensitive):
+	 */
+	switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
+	{
+		case 0: /* conforms, ie. bus-type dependent */
+		{
+			switch (mp_bus_id_to_type[bus])
+			{
+				case MP_BUS_ISA: /* ISA pin */
+				{
+					trigger = default_ISA_trigger(idx);
+					break;
+				}
+				case MP_BUS_EISA: /* EISA pin */
+				{
+					trigger = default_EISA_trigger(idx);
+					break;
+				}
+				case MP_BUS_PCI: /* PCI pin */
+				{
+					trigger = default_PCI_trigger(idx);
+					break;
+				}
+				case MP_BUS_MCA: /* MCA pin */
+				{
+					trigger = default_MCA_trigger(idx);
+					break;
+				}
+				case MP_BUS_NEC98: /* NEC 98 pin */
+				{
+					trigger = default_NEC98_trigger(idx);
+					break;
+				}
+				default:
+				{
+					printk(KERN_WARNING "broken BIOS!!\n");
+					trigger = 1;
+					break;
+				}
+			}
+			break;
+		}
+		case 1: /* edge */
+		{
+			trigger = 0;
+			break;
+		}
+		case 2: /* reserved */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			trigger = 1;
+			break;
+		}
+		case 3: /* level */
+		{
+			trigger = 1;
+			break;
+		}
+		default: /* invalid */
+		{
+			printk(KERN_WARNING "broken BIOS!!\n");
+			trigger = 0;
+			break;
+		}
+	}
+	return trigger;
+}
+
+static inline int irq_polarity(int idx)
+{
+	return MPBIOS_polarity(idx);
+}
+
+static inline int irq_trigger(int idx)
+{
+	return MPBIOS_trigger(idx);
+}
+
+static int pin_2_irq(int idx, int apic, int pin)
+{
+	int irq, i;
+	int bus = mp_irqs[idx].mpc_srcbus;
+
+	/*
+	 * Debugging check, we are in big trouble if this message pops up!
+	 */
+	if (mp_irqs[idx].mpc_dstirq != pin)
+		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
+
+	switch (mp_bus_id_to_type[bus])
+	{
+		case MP_BUS_ISA: /* ISA pin */
+		case MP_BUS_EISA:
+		case MP_BUS_MCA:
+		case MP_BUS_NEC98:
+		{
+			irq = mp_irqs[idx].mpc_srcbusirq;
+			break;
+		}
+		case MP_BUS_PCI: /* PCI pin */
+		{
+			/*
+			 * PCI IRQs are mapped in order
+			 */
+			i = irq = 0;
+			while (i < apic)
+				irq += nr_ioapic_registers[i++];
+			irq += pin;
+
+			/*
+			 * For MPS mode, so far only needed by ES7000 platform
+			 */
+			if (ioapic_renumber_irq)
+				irq = ioapic_renumber_irq(apic, irq);
+
+			break;
+		}
+		default:
+		{
+			printk(KERN_ERR "unknown bus type %d.\n",bus); 
+			irq = 0;
+			break;
+		}
+	}
+
+	/*
+	 * PCI IRQ command line redirection. Yes, limits are hardcoded.
+	 */
+	if ((pin >= 16) && (pin <= 23)) {
+		if (pirq_entries[pin-16] != -1) {
+			if (!pirq_entries[pin-16]) {
+				apic_printk(APIC_VERBOSE, KERN_DEBUG
+						"disabling PIRQ%d\n", pin-16);
+			} else {
+				irq = pirq_entries[pin-16];
+				apic_printk(APIC_VERBOSE, KERN_DEBUG
+						"using PIRQ%d -> IRQ %d\n",
+						pin-16, irq);
+			}
+		}
+	}
+	return irq;
+}
+
+static inline int IO_APIC_irq_trigger(int irq)
+{
+	int apic, idx, pin;
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+			idx = find_irq_entry(apic,pin,mp_INT);
+			if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
+				return irq_trigger(idx);
+		}
+	}
+	/*
+	 * nonexistent IRQs are edge default
+	 */
+	return 0;
+}
+
+/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
+u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 };
+
+int assign_irq_vector(int irq)
+{
+	static int current_vector = FIRST_DEVICE_VECTOR, offset = 0;
+
+	BUG_ON(irq >= NR_IRQ_VECTORS);
+	if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0)
+		return IO_APIC_VECTOR(irq);
+next:
+	current_vector += 8;
+	if (current_vector == SYSCALL_VECTOR)
+		goto next;
+
+	if (current_vector >= FIRST_SYSTEM_VECTOR) {
+		offset++;
+		if (!(offset%8))
+			return -ENOSPC;
+		current_vector = FIRST_DEVICE_VECTOR + offset;
+	}
+
+	vector_irq[current_vector] = irq;
+	if (irq != AUTO_ASSIGN)
+		IO_APIC_VECTOR(irq) = current_vector;
+
+	return current_vector;
+}
+
+static struct hw_interrupt_type ioapic_level_type;
+static struct hw_interrupt_type ioapic_edge_type;
+
+#define IOAPIC_AUTO	-1
+#define IOAPIC_EDGE	0
+#define IOAPIC_LEVEL	1
+
+static inline void ioapic_register_intr(int irq, int vector, unsigned long trigger)
+{
+	if (use_pci_vector() && !platform_legacy_irq(irq)) {
+		if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+				trigger == IOAPIC_LEVEL)
+			irq_desc[vector].handler = &ioapic_level_type;
+		else
+			irq_desc[vector].handler = &ioapic_edge_type;
+		set_intr_gate(vector, interrupt[vector]);
+	} else	{
+		if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+				trigger == IOAPIC_LEVEL)
+			irq_desc[irq].handler = &ioapic_level_type;
+		else
+			irq_desc[irq].handler = &ioapic_edge_type;
+		set_intr_gate(vector, interrupt[irq]);
+	}
+}
+
+static void __init setup_IO_APIC_irqs(void)
+{
+	struct IO_APIC_route_entry entry;
+	int apic, pin, idx, irq, first_notcon = 1, vector;
+	unsigned long flags;
+
+	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+	for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+
+		/*
+		 * add it to the IO-APIC irq-routing table:
+		 */
+		memset(&entry,0,sizeof(entry));
+
+		entry.delivery_mode = INT_DELIVERY_MODE;
+		entry.dest_mode = INT_DEST_MODE;
+		entry.mask = 0;				/* enable IRQ */
+		entry.dest.logical.logical_dest = 
+					cpu_mask_to_apicid(TARGET_CPUS);
+
+		idx = find_irq_entry(apic,pin,mp_INT);
+		if (idx == -1) {
+			if (first_notcon) {
+				apic_printk(APIC_VERBOSE, KERN_DEBUG
+						" IO-APIC (apicid-pin) %d-%d",
+						mp_ioapics[apic].mpc_apicid,
+						pin);
+				first_notcon = 0;
+			} else
+				apic_printk(APIC_VERBOSE, ", %d-%d",
+					mp_ioapics[apic].mpc_apicid, pin);
+			continue;
+		}
+
+		entry.trigger = irq_trigger(idx);
+		entry.polarity = irq_polarity(idx);
+
+		if (irq_trigger(idx)) {
+			entry.trigger = 1;
+			entry.mask = 1;
+		}
+
+		irq = pin_2_irq(idx, apic, pin);
+		/*
+		 * skip adding the timer int on secondary nodes, which causes
+		 * a small but painful rift in the time-space continuum
+		 */
+		if (multi_timer_check(apic, irq))
+			continue;
+		else
+			add_pin_to_irq(irq, apic, pin);
+
+		if (!apic && !IO_APIC_IRQ(irq))
+			continue;
+
+		if (IO_APIC_IRQ(irq)) {
+			vector = assign_irq_vector(irq);
+			entry.vector = vector;
+			ioapic_register_intr(irq, vector, IOAPIC_AUTO);
+		
+			if (!apic && (irq < 16))
+				disable_8259A_irq(irq);
+		}
+		spin_lock_irqsave(&ioapic_lock, flags);
+		io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
+		io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+	}
+	}
+
+	if (!first_notcon)
+		apic_printk(APIC_VERBOSE, " not connected.\n");
+}
+
+/*
+ * Set up the 8259A-master output pin:
+ */
+static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
+{
+	struct IO_APIC_route_entry entry;
+	unsigned long flags;
+
+	memset(&entry,0,sizeof(entry));
+
+	disable_8259A_irq(0);
+
+	/* mask LVT0 */
+	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+
+	/*
+	 * We use logical delivery to get the timer IRQ
+	 * to the first CPU.
+	 */
+	entry.dest_mode = INT_DEST_MODE;
+	entry.mask = 0;					/* unmask IRQ now */
+	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+	entry.delivery_mode = INT_DELIVERY_MODE;
+	entry.polarity = 0;
+	entry.trigger = 0;
+	entry.vector = vector;
+
+	/*
+	 * The timer IRQ doesn't have to know that behind the
+	 * scene we have a 8259A-master in AEOI mode ...
+	 */
+	irq_desc[0].handler = &ioapic_edge_type;
+
+	/*
+	 * Add it to the IO-APIC irq-routing table:
+	 */
+	spin_lock_irqsave(&ioapic_lock, flags);
+	io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
+	io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	enable_8259A_irq(0);
+}
+
+static inline void UNEXPECTED_IO_APIC(void)
+{
+}
+
+void __init print_IO_APIC(void)
+{
+	int apic, i;
+	union IO_APIC_reg_00 reg_00;
+	union IO_APIC_reg_01 reg_01;
+	union IO_APIC_reg_02 reg_02;
+	union IO_APIC_reg_03 reg_03;
+	unsigned long flags;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+ 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
+	for (i = 0; i < nr_ioapics; i++)
+		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
+		       mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+
+	/*
+	 * We are a bit conservative about what we expect.  We have to
+	 * know about every hardware change ASAP.
+	 */
+	printk(KERN_INFO "testing the IO APIC.......................\n");
+
+	for (apic = 0; apic < nr_ioapics; apic++) {
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_00.raw = io_apic_read(apic, 0);
+	reg_01.raw = io_apic_read(apic, 1);
+	if (reg_01.bits.version >= 0x10)
+		reg_02.raw = io_apic_read(apic, 2);
+	if (reg_01.bits.version >= 0x20)
+		reg_03.raw = io_apic_read(apic, 3);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
+	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
+	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
+	printk(KERN_DEBUG ".......    : Delivery Type: %X\n", reg_00.bits.delivery_type);
+	printk(KERN_DEBUG ".......    : LTS          : %X\n", reg_00.bits.LTS);
+	if (reg_00.bits.ID >= get_physical_broadcast())
+		UNEXPECTED_IO_APIC();
+	if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2)
+		UNEXPECTED_IO_APIC();
+
+	printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw);
+	printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
+	if (	(reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */
+		(reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */
+		(reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */
+		(reg_01.bits.entries != 0x1f) && /* dual Xeon boards */
+		(reg_01.bits.entries != 0x22) && /* bigger Xeon boards */
+		(reg_01.bits.entries != 0x2E) &&
+		(reg_01.bits.entries != 0x3F)
+	)
+		UNEXPECTED_IO_APIC();
+
+	printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
+	printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
+	if (	(reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */
+		(reg_01.bits.version != 0x10) && /* oldest IO-APICs */
+		(reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */
+		(reg_01.bits.version != 0x13) && /* Xeon IO-APICs */
+		(reg_01.bits.version != 0x20)    /* Intel P64H (82806 AA) */
+	)
+		UNEXPECTED_IO_APIC();
+	if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2)
+		UNEXPECTED_IO_APIC();
+
+	/*
+	 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
+	 * but the value of reg_02 is read as the previous read register
+	 * value, so ignore it if reg_02 == reg_01.
+	 */
+	if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
+		printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
+		printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
+		if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2)
+			UNEXPECTED_IO_APIC();
+	}
+
+	/*
+	 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
+	 * or reg_03, but the value of reg_0[23] is read as the previous read
+	 * register value, so ignore it if reg_03 == reg_0[12].
+	 */
+	if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
+	    reg_03.raw != reg_01.raw) {
+		printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
+		printk(KERN_DEBUG ".......     : Boot DT    : %X\n", reg_03.bits.boot_DT);
+		if (reg_03.bits.__reserved_1)
+			UNEXPECTED_IO_APIC();
+	}
+
+	printk(KERN_DEBUG ".... IRQ redirection table:\n");
+
+	printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
+			  " Stat Dest Deli Vect:   \n");
+
+	for (i = 0; i <= reg_01.bits.entries; i++) {
+		struct IO_APIC_route_entry entry;
+
+		spin_lock_irqsave(&ioapic_lock, flags);
+		*(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2);
+		*(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+
+		printk(KERN_DEBUG " %02x %03X %02X  ",
+			i,
+			entry.dest.logical.logical_dest,
+			entry.dest.physical.physical_dest
+		);
+
+		printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
+			entry.mask,
+			entry.trigger,
+			entry.irr,
+			entry.polarity,
+			entry.delivery_status,
+			entry.dest_mode,
+			entry.delivery_mode,
+			entry.vector
+		);
+	}
+	}
+	if (use_pci_vector())
+		printk(KERN_INFO "Using vector-based indexing\n");
+	printk(KERN_DEBUG "IRQ to pin mappings:\n");
+	for (i = 0; i < NR_IRQS; i++) {
+		struct irq_pin_list *entry = irq_2_pin + i;
+		if (entry->pin < 0)
+			continue;
+ 		if (use_pci_vector() && !platform_legacy_irq(i))
+			printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i));
+		else
+			printk(KERN_DEBUG "IRQ%d ", i);
+		for (;;) {
+			printk("-> %d:%d", entry->apic, entry->pin);
+			if (!entry->next)
+				break;
+			entry = irq_2_pin + entry->next;
+		}
+		printk("\n");
+	}
+
+	printk(KERN_INFO ".................................... done.\n");
+
+	return;
+}
+
+#if 0
+
+static void print_APIC_bitfield (int base)
+{
+	unsigned int v;
+	int i, j;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
+	for (i = 0; i < 8; i++) {
+		v = apic_read(base + i*0x10);
+		for (j = 0; j < 32; j++) {
+			if (v & (1<<j))
+				printk("1");
+			else
+				printk("0");
+		}
+		printk("\n");
+	}
+}
+
+void /*__init*/ print_local_APIC(void * dummy)
+{
+	unsigned int v, ver, maxlvt;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+		smp_processor_id(), hard_smp_processor_id());
+	v = apic_read(APIC_ID);
+	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(v));
+	v = apic_read(APIC_LVR);
+	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
+	ver = GET_APIC_VERSION(v);
+	maxlvt = get_maxlvt();
+
+	v = apic_read(APIC_TASKPRI);
+	printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
+
+	if (APIC_INTEGRATED(ver)) {			/* !82489DX */
+		v = apic_read(APIC_ARBPRI);
+		printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
+			v & APIC_ARBPRI_MASK);
+		v = apic_read(APIC_PROCPRI);
+		printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
+	}
+
+	v = apic_read(APIC_EOI);
+	printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
+	v = apic_read(APIC_RRR);
+	printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
+	v = apic_read(APIC_LDR);
+	printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
+	v = apic_read(APIC_DFR);
+	printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
+	v = apic_read(APIC_SPIV);
+	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
+
+	printk(KERN_DEBUG "... APIC ISR field:\n");
+	print_APIC_bitfield(APIC_ISR);
+	printk(KERN_DEBUG "... APIC TMR field:\n");
+	print_APIC_bitfield(APIC_TMR);
+	printk(KERN_DEBUG "... APIC IRR field:\n");
+	print_APIC_bitfield(APIC_IRR);
+
+	if (APIC_INTEGRATED(ver)) {		/* !82489DX */
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
+			apic_write(APIC_ESR, 0);
+		v = apic_read(APIC_ESR);
+		printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
+	}
+
+	v = apic_read(APIC_ICR);
+	printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
+	v = apic_read(APIC_ICR2);
+	printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
+
+	v = apic_read(APIC_LVTT);
+	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
+
+	if (maxlvt > 3) {                       /* PC is LVT#4. */
+		v = apic_read(APIC_LVTPC);
+		printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
+	}
+	v = apic_read(APIC_LVT0);
+	printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
+	v = apic_read(APIC_LVT1);
+	printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
+
+	if (maxlvt > 2) {			/* ERR is LVT#3. */
+		v = apic_read(APIC_LVTERR);
+		printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
+	}
+
+	v = apic_read(APIC_TMICT);
+	printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
+	v = apic_read(APIC_TMCCT);
+	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
+	v = apic_read(APIC_TDCR);
+	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
+	printk("\n");
+}
+
+void print_all_local_APICs (void)
+{
+	on_each_cpu(print_local_APIC, NULL, 1, 1);
+}
+
+void /*__init*/ print_PIC(void)
+{
+	extern spinlock_t i8259A_lock;
+	unsigned int v;
+	unsigned long flags;
+
+	if (apic_verbosity == APIC_QUIET)
+		return;
+
+	printk(KERN_DEBUG "\nprinting PIC contents\n");
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	v = inb(0xa1) << 8 | inb(0x21);
+	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
+
+	v = inb(0xa0) << 8 | inb(0x20);
+	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
+
+	outb(0x0b,0xa0);
+	outb(0x0b,0x20);
+	v = inb(0xa0) << 8 | inb(0x20);
+	outb(0x0a,0xa0);
+	outb(0x0a,0x20);
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+
+	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
+
+	v = inb(0x4d1) << 8 | inb(0x4d0);
+	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
+}
+
+#endif  /*  0  */
+
+static void __init enable_IO_APIC(void)
+{
+	union IO_APIC_reg_01 reg_01;
+	int i;
+	unsigned long flags;
+
+	for (i = 0; i < PIN_MAP_SIZE; i++) {
+		irq_2_pin[i].pin = -1;
+		irq_2_pin[i].next = 0;
+	}
+	if (!pirqs_enabled)
+		for (i = 0; i < MAX_PIRQS; i++)
+			pirq_entries[i] = -1;
+
+	/*
+	 * The number of IO-APIC IRQ registers (== #pins):
+	 */
+	for (i = 0; i < nr_ioapics; i++) {
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_01.raw = io_apic_read(i, 1);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		nr_ioapic_registers[i] = reg_01.bits.entries+1;
+	}
+
+	/*
+	 * Do not trust the IO-APIC being empty at bootup
+	 */
+	clear_IO_APIC();
+}
+
+/*
+ * Not an __init, needed by the reboot code
+ */
+void disable_IO_APIC(void)
+{
+	/*
+	 * Clear the IO-APIC before rebooting:
+	 */
+	clear_IO_APIC();
+
+	disconnect_bsp_APIC();
+}
+
+/*
+ * function to set the IO-APIC physical IDs based on the
+ * values stored in the MPC table.
+ *
+ * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
+ */
+
+#ifndef CONFIG_X86_NUMAQ
+static void __init setup_ioapic_ids_from_mpc(void)
+{
+	union IO_APIC_reg_00 reg_00;
+	physid_mask_t phys_id_present_map;
+	int apic;
+	int i;
+	unsigned char old_id;
+	unsigned long flags;
+
+	/*
+	 * This is broken; anything with a real cpu count has to
+	 * circumvent this idiocy regardless.
+	 */
+	phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
+
+	/*
+	 * Set the IOAPIC ID to the value stored in the MPC table.
+	 */
+	for (apic = 0; apic < nr_ioapics; apic++) {
+
+		/* Read the register 0 value */
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_00.raw = io_apic_read(apic, 0);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		
+		old_id = mp_ioapics[apic].mpc_apicid;
+
+		if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
+			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
+				apic, mp_ioapics[apic].mpc_apicid);
+			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+				reg_00.bits.ID);
+			mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
+		}
+
+		/* Don't check I/O APIC IDs for some xAPIC systems.  They have
+		 * no meaning without the serial APIC bus. */
+		if (NO_IOAPIC_CHECK)
+			continue;
+		/*
+		 * Sanity check, is the ID really free? Every APIC in a
+		 * system must have a unique ID or we get lots of nice
+		 * 'stuck on smp_invalidate_needed IPI wait' messages.
+		 */
+		if (check_apicid_used(phys_id_present_map,
+					mp_ioapics[apic].mpc_apicid)) {
+			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
+				apic, mp_ioapics[apic].mpc_apicid);
+			for (i = 0; i < get_physical_broadcast(); i++)
+				if (!physid_isset(i, phys_id_present_map))
+					break;
+			if (i >= get_physical_broadcast())
+				panic("Max APIC ID exceeded!\n");
+			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
+				i);
+			physid_set(i, phys_id_present_map);
+			mp_ioapics[apic].mpc_apicid = i;
+		} else {
+			physid_mask_t tmp;
+			tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
+			apic_printk(APIC_VERBOSE, "Setting %d in the "
+					"phys_id_present_map\n",
+					mp_ioapics[apic].mpc_apicid);
+			physids_or(phys_id_present_map, phys_id_present_map, tmp);
+		}
+
+
+		/*
+		 * We need to adjust the IRQ routing table
+		 * if the ID changed.
+		 */
+		if (old_id != mp_ioapics[apic].mpc_apicid)
+			for (i = 0; i < mp_irq_entries; i++)
+				if (mp_irqs[i].mpc_dstapic == old_id)
+					mp_irqs[i].mpc_dstapic
+						= mp_ioapics[apic].mpc_apicid;
+
+		/*
+		 * Read the right value from the MPC table and
+		 * write it into the ID register.
+	 	 */
+		apic_printk(APIC_VERBOSE, KERN_INFO
+			"...changing IO-APIC physical APIC ID to %d ...",
+			mp_ioapics[apic].mpc_apicid);
+
+		reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
+		spin_lock_irqsave(&ioapic_lock, flags);
+		io_apic_write(apic, 0, reg_00.raw);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+
+		/*
+		 * Sanity check
+		 */
+		spin_lock_irqsave(&ioapic_lock, flags);
+		reg_00.raw = io_apic_read(apic, 0);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+		if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
+			printk("could not set ID!\n");
+		else
+			apic_printk(APIC_VERBOSE, " ok.\n");
+	}
+}
+#else
+static void __init setup_ioapic_ids_from_mpc(void) { }
+#endif
+
+/*
+ * There is a nasty bug in some older SMP boards, their mptable lies
+ * about the timer IRQ. We do the following to work around the situation:
+ *
+ *	- timer IRQ defaults to IO-APIC IRQ
+ *	- if this function detects that timer IRQs are defunct, then we fall
+ *	  back to ISA timer IRQs
+ */
+static int __init timer_irq_works(void)
+{
+	unsigned long t1 = jiffies;
+
+	local_irq_enable();
+	/* Let ten ticks pass... */
+	mdelay((10 * 1000) / HZ);
+
+	/*
+	 * Expect a few ticks at least, to be sure some possible
+	 * glue logic does not lock up after one or two first
+	 * ticks in a non-ExtINT mode.  Also the local APIC
+	 * might have cached one ExtINT interrupt.  Finally, at
+	 * least one tick may be lost due to delays.
+	 */
+	if (jiffies - t1 > 4)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * In the SMP+IOAPIC case it might happen that there are an unspecified
+ * number of pending IRQ events unhandled. These cases are very rare,
+ * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
+ * better to do it this way as thus we do not have to be aware of
+ * 'pending' interrupts in the IRQ path, except at this point.
+ */
+/*
+ * Edge triggered needs to resend any interrupt
+ * that was delayed but this is now handled in the device
+ * independent code.
+ */
+
+/*
+ * Starting up a edge-triggered IO-APIC interrupt is
+ * nasty - we need to make sure that we get the edge.
+ * If it is already asserted for some reason, we need
+ * return 1 to indicate that is was pending.
+ *
+ * This is not complete - we should be able to fake
+ * an edge even if it isn't on the 8259A...
+ */
+static unsigned int startup_edge_ioapic_irq(unsigned int irq)
+{
+	int was_pending = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	if (irq < 16) {
+		disable_8259A_irq(irq);
+		if (i8259A_irq_pending(irq))
+			was_pending = 1;
+	}
+	__unmask_IO_APIC_irq(irq);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return was_pending;
+}
+
+/*
+ * Once we have recorded IRQ_PENDING already, we can mask the
+ * interrupt for real. This prevents IRQ storms from unhandled
+ * devices.
+ */
+static void ack_edge_ioapic_irq(unsigned int irq)
+{
+	move_irq(irq);
+	if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
+					== (IRQ_PENDING | IRQ_DISABLED))
+		mask_IO_APIC_irq(irq);
+	ack_APIC_irq();
+}
+
+/*
+ * Level triggered interrupts can just be masked,
+ * and shutting down and starting up the interrupt
+ * is the same as enabling and disabling them -- except
+ * with a startup need to return a "was pending" value.
+ *
+ * Level triggered interrupts are special because we
+ * do not touch any IO-APIC register while handling
+ * them. We ack the APIC in the end-IRQ handler, not
+ * in the start-IRQ-handler. Protection against reentrance
+ * from the same interrupt is still provided, both by the
+ * generic IRQ layer and by the fact that an unacked local
+ * APIC does not accept IRQs.
+ */
+static unsigned int startup_level_ioapic_irq (unsigned int irq)
+{
+	unmask_IO_APIC_irq(irq);
+
+	return 0; /* don't check for pending */
+}
+
+static void end_level_ioapic_irq (unsigned int irq)
+{
+	unsigned long v;
+	int i;
+
+	move_irq(irq);
+/*
+ * It appears there is an erratum which affects at least version 0x11
+ * of I/O APIC (that's the 82093AA and cores integrated into various
+ * chipsets).  Under certain conditions a level-triggered interrupt is
+ * erroneously delivered as edge-triggered one but the respective IRR
+ * bit gets set nevertheless.  As a result the I/O unit expects an EOI
+ * message but it will never arrive and further interrupts are blocked
+ * from the source.  The exact reason is so far unknown, but the
+ * phenomenon was observed when two consecutive interrupt requests
+ * from a given source get delivered to the same CPU and the source is
+ * temporarily disabled in between.
+ *
+ * A workaround is to simulate an EOI message manually.  We achieve it
+ * by setting the trigger mode to edge and then to level when the edge
+ * trigger mode gets detected in the TMR of a local APIC for a
+ * level-triggered interrupt.  We mask the source for the time of the
+ * operation to prevent an edge-triggered interrupt escaping meanwhile.
+ * The idea is from Manfred Spraul.  --macro
+ */
+	i = IO_APIC_VECTOR(irq);
+
+	v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
+
+	ack_APIC_irq();
+
+	if (!(v & (1 << (i & 0x1f)))) {
+		atomic_inc(&irq_mis_count);
+		spin_lock(&ioapic_lock);
+		__mask_and_edge_IO_APIC_irq(irq);
+		__unmask_and_level_IO_APIC_irq(irq);
+		spin_unlock(&ioapic_lock);
+	}
+}
+
+#ifdef CONFIG_PCI_MSI
+static unsigned int startup_edge_ioapic_vector(unsigned int vector)
+{
+	int irq = vector_to_irq(vector);
+
+	return startup_edge_ioapic_irq(irq);
+}
+
+static void ack_edge_ioapic_vector(unsigned int vector)
+{
+	int irq = vector_to_irq(vector);
+
+	ack_edge_ioapic_irq(irq);
+}
+
+static unsigned int startup_level_ioapic_vector (unsigned int vector)
+{
+	int irq = vector_to_irq(vector);
+
+	return startup_level_ioapic_irq (irq);
+}
+
+static void end_level_ioapic_vector (unsigned int vector)
+{
+	int irq = vector_to_irq(vector);
+
+	end_level_ioapic_irq(irq);
+}
+
+static void mask_IO_APIC_vector (unsigned int vector)
+{
+	int irq = vector_to_irq(vector);
+
+	mask_IO_APIC_irq(irq);
+}
+
+static void unmask_IO_APIC_vector (unsigned int vector)
+{
+	int irq = vector_to_irq(vector);
+
+	unmask_IO_APIC_irq(irq);
+}
+
+static void set_ioapic_affinity_vector (unsigned int vector,
+					cpumask_t cpu_mask)
+{
+	int irq = vector_to_irq(vector);
+
+	set_ioapic_affinity_irq(irq, cpu_mask);
+}
+#endif
+
+/*
+ * Level and edge triggered IO-APIC interrupts need different handling,
+ * so we use two separate IRQ descriptors. Edge triggered IRQs can be
+ * handled with the level-triggered descriptor, but that one has slightly
+ * more overhead. Level-triggered interrupts cannot be handled with the
+ * edge-triggered handler, without risking IRQ storms and other ugly
+ * races.
+ */
+static struct hw_interrupt_type ioapic_edge_type = {
+	.typename 	= "IO-APIC-edge",
+	.startup 	= startup_edge_ioapic,
+	.shutdown 	= shutdown_edge_ioapic,
+	.enable 	= enable_edge_ioapic,
+	.disable 	= disable_edge_ioapic,
+	.ack 		= ack_edge_ioapic,
+	.end 		= end_edge_ioapic,
+	.set_affinity 	= set_ioapic_affinity,
+};
+
+static struct hw_interrupt_type ioapic_level_type = {
+	.typename 	= "IO-APIC-level",
+	.startup 	= startup_level_ioapic,
+	.shutdown 	= shutdown_level_ioapic,
+	.enable 	= enable_level_ioapic,
+	.disable 	= disable_level_ioapic,
+	.ack 		= mask_and_ack_level_ioapic,
+	.end 		= end_level_ioapic,
+	.set_affinity 	= set_ioapic_affinity,
+};
+
+static inline void init_IO_APIC_traps(void)
+{
+	int irq;
+
+	/*
+	 * NOTE! The local APIC isn't very good at handling
+	 * multiple interrupts at the same interrupt level.
+	 * As the interrupt level is determined by taking the
+	 * vector number and shifting that right by 4, we
+	 * want to spread these out a bit so that they don't
+	 * all fall in the same interrupt level.
+	 *
+	 * Also, we've got to be careful not to trash gate
+	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
+	 */
+	for (irq = 0; irq < NR_IRQS ; irq++) {
+		int tmp = irq;
+		if (use_pci_vector()) {
+			if (!platform_legacy_irq(tmp))
+				if ((tmp = vector_to_irq(tmp)) == -1)
+					continue;
+		}
+		if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) {
+			/*
+			 * Hmm.. We don't have an entry for this,
+			 * so default to an old-fashioned 8259
+			 * interrupt if we can..
+			 */
+			if (irq < 16)
+				make_8259A_irq(irq);
+			else
+				/* Strange. Oh, well.. */
+				irq_desc[irq].handler = &no_irq_type;
+		}
+	}
+}
+
+static void enable_lapic_irq (unsigned int irq)
+{
+	unsigned long v;
+
+	v = apic_read(APIC_LVT0);
+	apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+}
+
+static void disable_lapic_irq (unsigned int irq)
+{
+	unsigned long v;
+
+	v = apic_read(APIC_LVT0);
+	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+}
+
+static void ack_lapic_irq (unsigned int irq)
+{
+	ack_APIC_irq();
+}
+
+static void end_lapic_irq (unsigned int i) { /* nothing */ }
+
+static struct hw_interrupt_type lapic_irq_type = {
+	.typename 	= "local-APIC-edge",
+	.startup 	= NULL, /* startup_irq() not used for IRQ0 */
+	.shutdown 	= NULL, /* shutdown_irq() not used for IRQ0 */
+	.enable 	= enable_lapic_irq,
+	.disable 	= disable_lapic_irq,
+	.ack 		= ack_lapic_irq,
+	.end 		= end_lapic_irq
+};
+
+static void setup_nmi (void)
+{
+	/*
+ 	 * Dirty trick to enable the NMI watchdog ...
+	 * We put the 8259A master into AEOI mode and
+	 * unmask on all local APICs LVT0 as NMI.
+	 *
+	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
+	 * is from Maciej W. Rozycki - so we do not have to EOI from
+	 * the NMI handler or the timer interrupt.
+	 */ 
+	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
+
+	on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1);
+
+	apic_printk(APIC_VERBOSE, " done.\n");
+}
+
+/*
+ * This looks a bit hackish but it's about the only one way of sending
+ * a few INTA cycles to 8259As and any associated glue logic.  ICR does
+ * not support the ExtINT mode, unfortunately.  We need to send these
+ * cycles as some i82489DX-based boards have glue logic that keeps the
+ * 8259A interrupt line asserted until INTA.  --macro
+ */
+static inline void unlock_ExtINT_logic(void)
+{
+	int pin, i;
+	struct IO_APIC_route_entry entry0, entry1;
+	unsigned char save_control, save_freq_select;
+	unsigned long flags;
+
+	pin = find_isa_irq_pin(8, mp_INT);
+	if (pin == -1)
+		return;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	*(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
+	*(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+	clear_IO_APIC_pin(0, pin);
+
+	memset(&entry1, 0, sizeof(entry1));
+
+	entry1.dest_mode = 0;			/* physical delivery */
+	entry1.mask = 0;			/* unmask IRQ now */
+	entry1.dest.physical.physical_dest = hard_smp_processor_id();
+	entry1.delivery_mode = dest_ExtINT;
+	entry1.polarity = entry0.polarity;
+	entry1.trigger = 0;
+	entry1.vector = 0;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
+	io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	save_control = CMOS_READ(RTC_CONTROL);
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+	CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
+		   RTC_FREQ_SELECT);
+	CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
+
+	i = 100;
+	while (i-- > 0) {
+		mdelay(10);
+		if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
+			i -= 10;
+	}
+
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+	clear_IO_APIC_pin(0, pin);
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
+	io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+/*
+ * This code may look a bit paranoid, but it's supposed to cooperate with
+ * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
+ * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
+ * fanatically on his truly buggy board.
+ */
+static inline void check_timer(void)
+{
+	int pin1, pin2;
+	int vector;
+
+	/*
+	 * get/set the timer IRQ vector:
+	 */
+	disable_8259A_irq(0);
+	vector = assign_irq_vector(0);
+	set_intr_gate(vector, interrupt[0]);
+
+	/*
+	 * Subtle, code in do_timer_interrupt() expects an AEOI
+	 * mode for the 8259A whenever interrupts are routed
+	 * through I/O APICs.  Also IRQ0 has to be enabled in
+	 * the 8259A which implies the virtual wire has to be
+	 * disabled in the local APIC.
+	 */
+	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+	init_8259A(1);
+	timer_ack = 1;
+	enable_8259A_irq(0);
+
+	pin1 = find_isa_irq_pin(0, mp_INT);
+	pin2 = find_isa_irq_pin(0, mp_ExtINT);
+
+	printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
+
+	if (pin1 != -1) {
+		/*
+		 * Ok, does IRQ0 through the IOAPIC work?
+		 */
+		unmask_IO_APIC_irq(0);
+		if (timer_irq_works()) {
+			if (nmi_watchdog == NMI_IO_APIC) {
+				disable_8259A_irq(0);
+				setup_nmi();
+				enable_8259A_irq(0);
+				check_nmi_watchdog();
+			}
+			return;
+		}
+		clear_IO_APIC_pin(0, pin1);
+		printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
+	}
+
+	printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
+	if (pin2 != -1) {
+		printk("\n..... (found pin %d) ...", pin2);
+		/*
+		 * legacy devices should be connected to IO APIC #0
+		 */
+		setup_ExtINT_IRQ0_pin(pin2, vector);
+		if (timer_irq_works()) {
+			printk("works.\n");
+			if (pin1 != -1)
+				replace_pin_at_irq(0, 0, pin1, 0, pin2);
+			else
+				add_pin_to_irq(0, 0, pin2);
+			if (nmi_watchdog == NMI_IO_APIC) {
+				setup_nmi();
+				check_nmi_watchdog();
+			}
+			return;
+		}
+		/*
+		 * Cleanup, just in case ...
+		 */
+		clear_IO_APIC_pin(0, pin2);
+	}
+	printk(" failed.\n");
+
+	if (nmi_watchdog == NMI_IO_APIC) {
+		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+		nmi_watchdog = 0;
+	}
+
+	printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+
+	disable_8259A_irq(0);
+	irq_desc[0].handler = &lapic_irq_type;
+	apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
+	enable_8259A_irq(0);
+
+	if (timer_irq_works()) {
+		printk(" works.\n");
+		return;
+	}
+	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+	printk(" failed.\n");
+
+	printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+
+	timer_ack = 0;
+	init_8259A(0);
+	make_8259A_irq(0);
+	apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+
+	unlock_ExtINT_logic();
+
+	if (timer_irq_works()) {
+		printk(" works.\n");
+		return;
+	}
+	printk(" failed :(.\n");
+	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
+		"report.  Then try booting with the 'noapic' option");
+}
+
+/*
+ *
+ * IRQ's that are handled by the PIC in the MPS IOAPIC case.
+ * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
+ *   Linux doesn't really care, as it's not actually used
+ *   for any interrupt handling anyway.
+ */
+#define PIC_IRQS	(1 << PIC_CASCADE_IR)
+
+void __init setup_IO_APIC(void)
+{
+	enable_IO_APIC();
+
+	if (acpi_ioapic)
+		io_apic_irqs = ~0;	/* all IRQs go through IOAPIC */
+	else
+		io_apic_irqs = ~PIC_IRQS;
+
+	printk("ENABLING IO-APIC IRQs\n");
+
+	/*
+	 * Set up IO-APIC IRQ routing.
+	 */
+	if (!acpi_ioapic)
+		setup_ioapic_ids_from_mpc();
+	sync_Arb_IDs();
+	setup_IO_APIC_irqs();
+	init_IO_APIC_traps();
+	check_timer();
+	if (!acpi_ioapic)
+		print_IO_APIC();
+}
+
+/*
+ *	Called after all the initialization is done. If we didnt find any
+ *	APIC bugs then we can allow the modify fast path
+ */
+ 
+static int __init io_apic_bug_finalize(void)
+{
+	if(sis_apic_bug == -1)
+		sis_apic_bug = 0;
+	return 0;
+}
+
+late_initcall(io_apic_bug_finalize);
+
+struct sysfs_ioapic_data {
+	struct sys_device dev;
+	struct IO_APIC_route_entry entry[0];
+};
+static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
+
+static int ioapic_suspend(struct sys_device *dev, u32 state)
+{
+	struct IO_APIC_route_entry *entry;
+	struct sysfs_ioapic_data *data;
+	unsigned long flags;
+	int i;
+	
+	data = container_of(dev, struct sysfs_ioapic_data, dev);
+	entry = data->entry;
+	spin_lock_irqsave(&ioapic_lock, flags);
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
+		*(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i);
+		*(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i);
+	}
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return 0;
+}
+
+static int ioapic_resume(struct sys_device *dev)
+{
+	struct IO_APIC_route_entry *entry;
+	struct sysfs_ioapic_data *data;
+	unsigned long flags;
+	union IO_APIC_reg_00 reg_00;
+	int i;
+	
+	data = container_of(dev, struct sysfs_ioapic_data, dev);
+	entry = data->entry;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_00.raw = io_apic_read(dev->id, 0);
+	if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
+		reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
+		io_apic_write(dev->id, 0, reg_00.raw);
+	}
+	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
+		io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1));
+		io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0));
+	}
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return 0;
+}
+
+static struct sysdev_class ioapic_sysdev_class = {
+	set_kset_name("ioapic"),
+	.suspend = ioapic_suspend,
+	.resume = ioapic_resume,
+};
+
+static int __init ioapic_init_sysfs(void)
+{
+	struct sys_device * dev;
+	int i, size, error = 0;
+
+	error = sysdev_class_register(&ioapic_sysdev_class);
+	if (error)
+		return error;
+
+	for (i = 0; i < nr_ioapics; i++ ) {
+		size = sizeof(struct sys_device) + nr_ioapic_registers[i] 
+			* sizeof(struct IO_APIC_route_entry);
+		mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
+		if (!mp_ioapic_data[i]) {
+			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
+			continue;
+		}
+		memset(mp_ioapic_data[i], 0, size);
+		dev = &mp_ioapic_data[i]->dev;
+		dev->id = i; 
+		dev->cls = &ioapic_sysdev_class;
+		error = sysdev_register(dev);
+		if (error) {
+			kfree(mp_ioapic_data[i]);
+			mp_ioapic_data[i] = NULL;
+			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+device_initcall(ioapic_init_sysfs);
+
+/* --------------------------------------------------------------------------
+                          ACPI-based IOAPIC Configuration
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_BOOT
+
+int __init io_apic_get_unique_id (int ioapic, int apic_id)
+{
+	union IO_APIC_reg_00 reg_00;
+	static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
+	physid_mask_t tmp;
+	unsigned long flags;
+	int i = 0;
+
+	/*
+	 * The P4 platform supports up to 256 APIC IDs on two separate APIC 
+	 * buses (one for LAPICs, one for IOAPICs), where predecessors only 
+	 * supports up to 16 on one shared APIC bus.
+	 * 
+	 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
+	 *      advantage of new APIC bus architecture.
+	 */
+
+	if (physids_empty(apic_id_map))
+		apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_00.raw = io_apic_read(ioapic, 0);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	if (apic_id >= get_physical_broadcast()) {
+		printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
+			"%d\n", ioapic, apic_id, reg_00.bits.ID);
+		apic_id = reg_00.bits.ID;
+	}
+
+	/*
+	 * Every APIC in a system must have a unique ID or we get lots of nice 
+	 * 'stuck on smp_invalidate_needed IPI wait' messages.
+	 */
+	if (check_apicid_used(apic_id_map, apic_id)) {
+
+		for (i = 0; i < get_physical_broadcast(); i++) {
+			if (!check_apicid_used(apic_id_map, i))
+				break;
+		}
+
+		if (i == get_physical_broadcast())
+			panic("Max apic_id exceeded!\n");
+
+		printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
+			"trying %d\n", ioapic, apic_id, i);
+
+		apic_id = i;
+	} 
+
+	tmp = apicid_to_cpu_present(apic_id);
+	physids_or(apic_id_map, apic_id_map, tmp);
+
+	if (reg_00.bits.ID != apic_id) {
+		reg_00.bits.ID = apic_id;
+
+		spin_lock_irqsave(&ioapic_lock, flags);
+		io_apic_write(ioapic, 0, reg_00.raw);
+		reg_00.raw = io_apic_read(ioapic, 0);
+		spin_unlock_irqrestore(&ioapic_lock, flags);
+
+		/* Sanity check */
+		if (reg_00.bits.ID != apic_id)
+			panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+	}
+
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
+
+	return apic_id;
+}
+
+
+int __init io_apic_get_version (int ioapic)
+{
+	union IO_APIC_reg_01	reg_01;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_01.raw = io_apic_read(ioapic, 1);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return reg_01.bits.version;
+}
+
+
+int __init io_apic_get_redir_entries (int ioapic)
+{
+	union IO_APIC_reg_01	reg_01;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	reg_01.raw = io_apic_read(ioapic, 1);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return reg_01.bits.entries;
+}
+
+
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
+{
+	struct IO_APIC_route_entry entry;
+	unsigned long flags;
+
+	if (!IO_APIC_IRQ(irq)) {
+		printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+			ioapic);
+		return -EINVAL;
+	}
+
+	/*
+	 * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
+	 * Note that we mask (disable) IRQs now -- these get enabled when the
+	 * corresponding device driver registers for this IRQ.
+	 */
+
+	memset(&entry,0,sizeof(entry));
+
+	entry.delivery_mode = INT_DELIVERY_MODE;
+	entry.dest_mode = INT_DEST_MODE;
+	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+	entry.trigger = edge_level;
+	entry.polarity = active_high_low;
+	entry.mask  = 1;
+
+	/*
+	 * IRQs < 16 are already in the irq_2_pin[] map
+	 */
+	if (irq >= 16)
+		add_pin_to_irq(irq, ioapic, pin);
+
+	entry.vector = assign_irq_vector(irq);
+
+	apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
+		"(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic,
+		mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
+		edge_level, active_high_low);
+
+	ioapic_register_intr(irq, entry.vector, edge_level);
+
+	if (!ioapic && (irq < 16))
+		disable_8259A_irq(irq);
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
+	io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return 0;
+}
+
+#endif /*CONFIG_ACPI_BOOT*/
diff --git a/arch/i386/kernel/ioport.c b/arch/i386/kernel/ioport.c
new file mode 100644
index 000000000000..8b25160393c1
--- /dev/null
+++ b/arch/i386/kernel/ioport.c
@@ -0,0 +1,147 @@
+/*
+ *	linux/arch/i386/kernel/ioport.c
+ *
+ * This contains the io-permission bitmap code - written by obz, with changes
+ * by Linus.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/thread_info.h>
+
+/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
+static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value)
+{
+	unsigned long mask;
+	unsigned long *bitmap_base = bitmap + (base / BITS_PER_LONG);
+	unsigned int low_index = base & (BITS_PER_LONG-1);
+	int length = low_index + extent;
+
+	if (low_index != 0) {
+		mask = (~0UL << low_index);
+		if (length < BITS_PER_LONG)
+			mask &= ~(~0UL << length);
+		if (new_value)
+			*bitmap_base++ |= mask;
+		else
+			*bitmap_base++ &= ~mask;
+		length -= BITS_PER_LONG;
+	}
+
+	mask = (new_value ? ~0UL : 0UL);
+	while (length >= BITS_PER_LONG) {
+		*bitmap_base++ = mask;
+		length -= BITS_PER_LONG;
+	}
+
+	if (length > 0) {
+		mask = ~(~0UL << length);
+		if (new_value)
+			*bitmap_base++ |= mask;
+		else
+			*bitmap_base++ &= ~mask;
+	}
+}
+
+
+/*
+ * this changes the io permissions bitmap in the current task.
+ */
+asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
+{
+	unsigned long i, max_long, bytes, bytes_updated;
+	struct thread_struct * t = &current->thread;
+	struct tss_struct * tss;
+	unsigned long *bitmap;
+
+	if ((from + num <= from) || (from + num > IO_BITMAP_BITS))
+		return -EINVAL;
+	if (turn_on && !capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
+	/*
+	 * If it's the first ioperm() call in this thread's lifetime, set the
+	 * IO bitmap up. ioperm() is much less timing critical than clone(),
+	 * this is why we delay this operation until now:
+	 */
+	if (!t->io_bitmap_ptr) {
+		bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
+		if (!bitmap)
+			return -ENOMEM;
+
+		memset(bitmap, 0xff, IO_BITMAP_BYTES);
+		t->io_bitmap_ptr = bitmap;
+	}
+
+	/*
+	 * do it in the per-thread copy and in the TSS ...
+	 *
+	 * Disable preemption via get_cpu() - we must not switch away
+	 * because the ->io_bitmap_max value must match the bitmap
+	 * contents:
+	 */
+	tss = &per_cpu(init_tss, get_cpu());
+
+	set_bitmap(t->io_bitmap_ptr, from, num, !turn_on);
+
+	/*
+	 * Search for a (possibly new) maximum. This is simple and stupid,
+	 * to keep it obviously correct:
+	 */
+	max_long = 0;
+	for (i = 0; i < IO_BITMAP_LONGS; i++)
+		if (t->io_bitmap_ptr[i] != ~0UL)
+			max_long = i;
+
+	bytes = (max_long + 1) * sizeof(long);
+	bytes_updated = max(bytes, t->io_bitmap_max);
+
+	t->io_bitmap_max = bytes;
+
+	/*
+	 * Sets the lazy trigger so that the next I/O operation will
+	 * reload the correct bitmap.
+	 */
+	tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
+
+	put_cpu();
+
+	return 0;
+}
+
+/*
+ * sys_iopl has to be used when you want to access the IO ports
+ * beyond the 0x3ff range: to get the full 65536 ports bitmapped
+ * you'd need 8kB of bitmaps/process, which is a bit excessive.
+ *
+ * Here we just change the eflags value on the stack: we allow
+ * only the super-user to do it. This depends on the stack-layout
+ * on system-call entry - see also fork() and the signal handling
+ * code.
+ */
+
+asmlinkage long sys_iopl(unsigned long unused)
+{
+	volatile struct pt_regs * regs = (struct pt_regs *) &unused;
+	unsigned int level = regs->ebx;
+	unsigned int old = (regs->eflags >> 12) & 3;
+
+	if (level > 3)
+		return -EINVAL;
+	/* Trying to gain more privileges? */
+	if (level > old) {
+		if (!capable(CAP_SYS_RAWIO))
+			return -EPERM;
+	}
+	regs->eflags = (regs->eflags &~ 0x3000UL) | (level << 12);
+	/* Make sure we return the long way (not sysenter) */
+	set_thread_flag(TIF_IRET);
+	return 0;
+}
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
new file mode 100644
index 000000000000..73945a3c53c4
--- /dev/null
+++ b/arch/i386/kernel/irq.c
@@ -0,0 +1,261 @@
+/*
+ *	linux/arch/i386/kernel/irq.c
+ *
+ *	Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
+ *
+ * This file contains the lowest level x86-specific interrupt
+ * entry, irq-stacks and irq statistics code. All the remaining
+ * irq logic is done by the generic kernel/irq/ code and
+ * by the x86-specific irq controller code. (e.g. i8259.c and
+ * io_apic.c.)
+ */
+
+#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+
+DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_maxaligned_in_smp;
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
+#ifndef CONFIG_X86_LOCAL_APIC
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+	printk("unexpected IRQ trap at vector %02x\n", irq);
+}
+#endif
+
+#ifdef CONFIG_4KSTACKS
+/*
+ * per-CPU IRQ handling contexts (thread information and stack)
+ */
+union irq_ctx {
+	struct thread_info      tinfo;
+	u32                     stack[THREAD_SIZE/sizeof(u32)];
+};
+
+static union irq_ctx *hardirq_ctx[NR_CPUS];
+static union irq_ctx *softirq_ctx[NR_CPUS];
+#endif
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+fastcall unsigned int do_IRQ(struct pt_regs *regs)
+{	
+	/* high bits used in ret_from_ code */
+	int irq = regs->orig_eax & 0xff;
+#ifdef CONFIG_4KSTACKS
+	union irq_ctx *curctx, *irqctx;
+	u32 *isp;
+#endif
+
+	irq_enter();
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* Debugging check for stack overflow: is there less than 1KB free? */
+	{
+		long esp;
+
+		__asm__ __volatile__("andl %%esp,%0" :
+					"=r" (esp) : "0" (THREAD_SIZE - 1));
+		if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) {
+			printk("do_IRQ: stack overflow: %ld\n",
+				esp - sizeof(struct thread_info));
+			dump_stack();
+		}
+	}
+#endif
+
+#ifdef CONFIG_4KSTACKS
+
+	curctx = (union irq_ctx *) current_thread_info();
+	irqctx = hardirq_ctx[smp_processor_id()];
+
+	/*
+	 * this is where we switch to the IRQ stack. However, if we are
+	 * already using the IRQ stack (because we interrupted a hardirq
+	 * handler) we can't do that and just have to keep using the
+	 * current stack (which is the irq stack already after all)
+	 */
+	if (curctx != irqctx) {
+		int arg1, arg2, ebx;
+
+		/* build the stack frame on the IRQ stack */
+		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
+		irqctx->tinfo.task = curctx->tinfo.task;
+		irqctx->tinfo.previous_esp = current_stack_pointer;
+
+		asm volatile(
+			"       xchgl   %%ebx,%%esp      \n"
+			"       call    __do_IRQ         \n"
+			"       movl   %%ebx,%%esp      \n"
+			: "=a" (arg1), "=d" (arg2), "=b" (ebx)
+			:  "0" (irq),   "1" (regs),  "2" (isp)
+			: "memory", "cc", "ecx"
+		);
+	} else
+#endif
+		__do_IRQ(irq, regs);
+
+	irq_exit();
+
+	return 1;
+}
+
+#ifdef CONFIG_4KSTACKS
+
+/*
+ * These should really be __section__(".bss.page_aligned") as well, but
+ * gcc's 3.0 and earlier don't handle that correctly.
+ */
+static char softirq_stack[NR_CPUS * THREAD_SIZE]
+		__attribute__((__aligned__(THREAD_SIZE)));
+
+static char hardirq_stack[NR_CPUS * THREAD_SIZE]
+		__attribute__((__aligned__(THREAD_SIZE)));
+
+/*
+ * allocate per-cpu stacks for hardirq and for softirq processing
+ */
+void irq_ctx_init(int cpu)
+{
+	union irq_ctx *irqctx;
+
+	if (hardirq_ctx[cpu])
+		return;
+
+	irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
+	irqctx->tinfo.task              = NULL;
+	irqctx->tinfo.exec_domain       = NULL;
+	irqctx->tinfo.cpu               = cpu;
+	irqctx->tinfo.preempt_count     = HARDIRQ_OFFSET;
+	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
+
+	hardirq_ctx[cpu] = irqctx;
+
+	irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE];
+	irqctx->tinfo.task              = NULL;
+	irqctx->tinfo.exec_domain       = NULL;
+	irqctx->tinfo.cpu               = cpu;
+	irqctx->tinfo.preempt_count     = SOFTIRQ_OFFSET;
+	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
+
+	softirq_ctx[cpu] = irqctx;
+
+	printk("CPU %u irqstacks, hard=%p soft=%p\n",
+		cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
+}
+
+extern asmlinkage void __do_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+	unsigned long flags;
+	struct thread_info *curctx;
+	union irq_ctx *irqctx;
+	u32 *isp;
+
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+
+	if (local_softirq_pending()) {
+		curctx = current_thread_info();
+		irqctx = softirq_ctx[smp_processor_id()];
+		irqctx->tinfo.task = curctx->task;
+		irqctx->tinfo.previous_esp = current_stack_pointer;
+
+		/* build the stack frame on the softirq stack */
+		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
+
+		asm volatile(
+			"       xchgl   %%ebx,%%esp     \n"
+			"       call    __do_softirq    \n"
+			"       movl    %%ebx,%%esp     \n"
+			: "=b"(isp)
+			: "0"(isp)
+			: "memory", "cc", "edx", "ecx", "eax"
+		);
+	}
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(do_softirq);
+#endif
+
+/*
+ * Interrupt statistics:
+ */
+
+atomic_t irq_err_count;
+
+/*
+ * /proc/interrupts printing:
+ */
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *) v, j;
+	struct irqaction * action;
+	unsigned long flags;
+
+	if (i == 0) {
+		seq_printf(p, "           ");
+		for (j=0; j<NR_CPUS; j++)
+			if (cpu_online(j))
+				seq_printf(p, "CPU%d       ",j);
+		seq_putc(p, '\n');
+	}
+
+	if (i < NR_IRQS) {
+		spin_lock_irqsave(&irq_desc[i].lock, flags);
+		action = irq_desc[i].action;
+		if (!action)
+			goto skip;
+		seq_printf(p, "%3d: ",i);
+#ifndef CONFIG_SMP
+		seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+		for (j = 0; j < NR_CPUS; j++)
+			if (cpu_online(j))
+				seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+#endif
+		seq_printf(p, " %14s", irq_desc[i].handler->typename);
+		seq_printf(p, "  %s", action->name);
+
+		for (action=action->next; action; action = action->next)
+			seq_printf(p, ", %s", action->name);
+
+		seq_putc(p, '\n');
+skip:
+		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+	} else if (i == NR_IRQS) {
+		seq_printf(p, "NMI: ");
+		for (j = 0; j < NR_CPUS; j++)
+			if (cpu_online(j))
+				seq_printf(p, "%10u ", nmi_count(j));
+		seq_putc(p, '\n');
+#ifdef CONFIG_X86_LOCAL_APIC
+		seq_printf(p, "LOC: ");
+		for (j = 0; j < NR_CPUS; j++)
+			if (cpu_online(j))
+				seq_printf(p, "%10u ",
+					per_cpu(irq_stat,j).apic_timer_irqs);
+		seq_putc(p, '\n');
+#endif
+		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+#if defined(CONFIG_X86_IO_APIC)
+		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
+#endif
+	}
+	return 0;
+}
diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c
new file mode 100644
index 000000000000..671681659243
--- /dev/null
+++ b/arch/i386/kernel/kprobes.c
@@ -0,0 +1,385 @@
+/*
+ *  Kernel Probes (KProbes)
+ *  arch/i386/kernel/kprobes.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes contributions from
+ *		Rusty Russell).
+ * 2004-July	Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
+ *		interface to access function arguments.
+ */
+
+#include <linux/config.h>
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/spinlock.h>
+#include <linux/preempt.h>
+#include <asm/kdebug.h>
+#include <asm/desc.h>
+
+/* kprobe_status settings */
+#define KPROBE_HIT_ACTIVE	0x00000001
+#define KPROBE_HIT_SS		0x00000002
+
+static struct kprobe *current_kprobe;
+static unsigned long kprobe_status, kprobe_old_eflags, kprobe_saved_eflags;
+static struct pt_regs jprobe_saved_regs;
+static long *jprobe_saved_esp;
+/* copy of the kernel stack at the probe fire time */
+static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
+void jprobe_return_end(void);
+
+/*
+ * returns non-zero if opcode modifies the interrupt flag.
+ */
+static inline int is_IF_modifier(kprobe_opcode_t opcode)
+{
+	switch (opcode) {
+	case 0xfa:		/* cli */
+	case 0xfb:		/* sti */
+	case 0xcf:		/* iret/iretd */
+	case 0x9d:		/* popf/popfd */
+		return 1;
+	}
+	return 0;
+}
+
+int arch_prepare_kprobe(struct kprobe *p)
+{
+	return 0;
+}
+
+void arch_copy_kprobe(struct kprobe *p)
+{
+	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+}
+
+void arch_remove_kprobe(struct kprobe *p)
+{
+}
+
+static inline void disarm_kprobe(struct kprobe *p, struct pt_regs *regs)
+{
+	*p->addr = p->opcode;
+	regs->eip = (unsigned long)p->addr;
+}
+
+static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+	regs->eflags |= TF_MASK;
+	regs->eflags &= ~IF_MASK;
+	/*single step inline if the instruction is an int3*/
+	if (p->opcode == BREAKPOINT_INSTRUCTION)
+		regs->eip = (unsigned long)p->addr;
+	else
+		regs->eip = (unsigned long)&p->ainsn.insn;
+}
+
+/*
+ * Interrupts are disabled on entry as trap3 is an interrupt gate and they
+ * remain disabled thorough out this function.
+ */
+static int kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *p;
+	int ret = 0;
+	kprobe_opcode_t *addr = NULL;
+	unsigned long *lp;
+
+	/* We're in an interrupt, but this is clear and BUG()-safe. */
+	preempt_disable();
+	/* Check if the application is using LDT entry for its code segment and
+	 * calculate the address by reading the base address from the LDT entry.
+	 */
+	if ((regs->xcs & 4) && (current->mm)) {
+		lp = (unsigned long *) ((unsigned long)((regs->xcs >> 3) * 8)
+					+ (char *) current->mm->context.ldt);
+		addr = (kprobe_opcode_t *) (get_desc_base(lp) + regs->eip -
+						sizeof(kprobe_opcode_t));
+	} else {
+		addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t));
+	}
+	/* Check we're not actually recursing */
+	if (kprobe_running()) {
+		/* We *are* holding lock here, so this is safe.
+		   Disarm the probe we just hit, and ignore it. */
+		p = get_kprobe(addr);
+		if (p) {
+			if (kprobe_status == KPROBE_HIT_SS) {
+				regs->eflags &= ~TF_MASK;
+				regs->eflags |= kprobe_saved_eflags;
+				unlock_kprobes();
+				goto no_kprobe;
+			}
+			disarm_kprobe(p, regs);
+			ret = 1;
+		} else {
+			p = current_kprobe;
+			if (p->break_handler && p->break_handler(p, regs)) {
+				goto ss_probe;
+			}
+		}
+		/* If it's not ours, can't be delete race, (we hold lock). */
+		goto no_kprobe;
+	}
+
+	lock_kprobes();
+	p = get_kprobe(addr);
+	if (!p) {
+		unlock_kprobes();
+		if (regs->eflags & VM_MASK) {
+			/* We are in virtual-8086 mode. Return 0 */
+			goto no_kprobe;
+		}
+
+		if (*addr != BREAKPOINT_INSTRUCTION) {
+			/*
+			 * The breakpoint instruction was removed right
+			 * after we hit it.  Another cpu has removed
+			 * either a probepoint or a debugger breakpoint
+			 * at this address.  In either case, no further
+			 * handling of this interrupt is appropriate.
+			 */
+			ret = 1;
+		}
+		/* Not one of ours: let kernel handle it */
+		goto no_kprobe;
+	}
+
+	kprobe_status = KPROBE_HIT_ACTIVE;
+	current_kprobe = p;
+	kprobe_saved_eflags = kprobe_old_eflags
+	    = (regs->eflags & (TF_MASK | IF_MASK));
+	if (is_IF_modifier(p->opcode))
+		kprobe_saved_eflags &= ~IF_MASK;
+
+	if (p->pre_handler && p->pre_handler(p, regs))
+		/* handler has already set things up, so skip ss setup */
+		return 1;
+
+ss_probe:
+	prepare_singlestep(p, regs);
+	kprobe_status = KPROBE_HIT_SS;
+	return 1;
+
+no_kprobe:
+	preempt_enable_no_resched();
+	return ret;
+}
+
+/*
+ * Called after single-stepping.  p->addr is the address of the
+ * instruction whose first byte has been replaced by the "int 3"
+ * instruction.  To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction.  The address of this
+ * copy is p->ainsn.insn.
+ *
+ * This function prepares to return from the post-single-step
+ * interrupt.  We have to fix up the stack as follows:
+ *
+ * 0) Except in the case of absolute or indirect jump or call instructions,
+ * the new eip is relative to the copied instruction.  We need to make
+ * it relative to the original instruction.
+ *
+ * 1) If the single-stepped instruction was pushfl, then the TF and IF
+ * flags are set in the just-pushed eflags, and may need to be cleared.
+ *
+ * 2) If the single-stepped instruction was a call, the return address
+ * that is atop the stack is the address following the copied instruction.
+ * We need to make it the address following the original instruction.
+ */
+static void resume_execution(struct kprobe *p, struct pt_regs *regs)
+{
+	unsigned long *tos = (unsigned long *)&regs->esp;
+	unsigned long next_eip = 0;
+	unsigned long copy_eip = (unsigned long)&p->ainsn.insn;
+	unsigned long orig_eip = (unsigned long)p->addr;
+
+	switch (p->ainsn.insn[0]) {
+	case 0x9c:		/* pushfl */
+		*tos &= ~(TF_MASK | IF_MASK);
+		*tos |= kprobe_old_eflags;
+		break;
+	case 0xe8:		/* call relative - Fix return addr */
+		*tos = orig_eip + (*tos - copy_eip);
+		break;
+	case 0xff:
+		if ((p->ainsn.insn[1] & 0x30) == 0x10) {
+			/* call absolute, indirect */
+			/* Fix return addr; eip is correct. */
+			next_eip = regs->eip;
+			*tos = orig_eip + (*tos - copy_eip);
+		} else if (((p->ainsn.insn[1] & 0x31) == 0x20) ||	/* jmp near, absolute indirect */
+			   ((p->ainsn.insn[1] & 0x31) == 0x21)) {	/* jmp far, absolute indirect */
+			/* eip is correct. */
+			next_eip = regs->eip;
+		}
+		break;
+	case 0xea:		/* jmp absolute -- eip is correct */
+		next_eip = regs->eip;
+		break;
+	default:
+		break;
+	}
+
+	regs->eflags &= ~TF_MASK;
+	if (next_eip) {
+		regs->eip = next_eip;
+	} else {
+		regs->eip = orig_eip + (regs->eip - copy_eip);
+	}
+}
+
+/*
+ * Interrupts are disabled on entry as trap1 is an interrupt gate and they
+ * remain disabled thoroughout this function.  And we hold kprobe lock.
+ */
+static inline int post_kprobe_handler(struct pt_regs *regs)
+{
+	if (!kprobe_running())
+		return 0;
+
+	if (current_kprobe->post_handler)
+		current_kprobe->post_handler(current_kprobe, regs, 0);
+
+	resume_execution(current_kprobe, regs);
+	regs->eflags |= kprobe_saved_eflags;
+
+	unlock_kprobes();
+	preempt_enable_no_resched();
+
+	/*
+	 * if somebody else is singlestepping across a probe point, eflags
+	 * will have TF set, in which case, continue the remaining processing
+	 * of do_debug, as if this is not a probe hit.
+	 */
+	if (regs->eflags & TF_MASK)
+		return 0;
+
+	return 1;
+}
+
+/* Interrupts disabled, kprobe_lock held. */
+static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	if (current_kprobe->fault_handler
+	    && current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+		return 1;
+
+	if (kprobe_status & KPROBE_HIT_SS) {
+		resume_execution(current_kprobe, regs);
+		regs->eflags |= kprobe_old_eflags;
+
+		unlock_kprobes();
+		preempt_enable_no_resched();
+	}
+	return 0;
+}
+
+/*
+ * Wrapper routine to for handling exceptions.
+ */
+int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val,
+			     void *data)
+{
+	struct die_args *args = (struct die_args *)data;
+	switch (val) {
+	case DIE_INT3:
+		if (kprobe_handler(args->regs))
+			return NOTIFY_STOP;
+		break;
+	case DIE_DEBUG:
+		if (post_kprobe_handler(args->regs))
+			return NOTIFY_STOP;
+		break;
+	case DIE_GPF:
+		if (kprobe_running() &&
+		    kprobe_fault_handler(args->regs, args->trapnr))
+			return NOTIFY_STOP;
+		break;
+	case DIE_PAGE_FAULT:
+		if (kprobe_running() &&
+		    kprobe_fault_handler(args->regs, args->trapnr))
+			return NOTIFY_STOP;
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct jprobe *jp = container_of(p, struct jprobe, kp);
+	unsigned long addr;
+
+	jprobe_saved_regs = *regs;
+	jprobe_saved_esp = &regs->esp;
+	addr = (unsigned long)jprobe_saved_esp;
+
+	/*
+	 * TBD: As Linus pointed out, gcc assumes that the callee
+	 * owns the argument space and could overwrite it, e.g.
+	 * tailcall optimization. So, to be absolutely safe
+	 * we also save and restore enough stack bytes to cover
+	 * the argument area.
+	 */
+	memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr));
+	regs->eflags &= ~IF_MASK;
+	regs->eip = (unsigned long)(jp->entry);
+	return 1;
+}
+
+void jprobe_return(void)
+{
+	preempt_enable_no_resched();
+	asm volatile ("       xchgl   %%ebx,%%esp     \n"
+		      "       int3			\n"
+		      "       .globl jprobe_return_end	\n"
+		      "       jprobe_return_end:	\n"
+		      "       nop			\n"::"b"
+		      (jprobe_saved_esp):"memory");
+}
+
+int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	u8 *addr = (u8 *) (regs->eip - 1);
+	unsigned long stack_addr = (unsigned long)jprobe_saved_esp;
+	struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+	if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) {
+		if (&regs->esp != jprobe_saved_esp) {
+			struct pt_regs *saved_regs =
+			    container_of(jprobe_saved_esp, struct pt_regs, esp);
+			printk("current esp %p does not match saved esp %p\n",
+			       &regs->esp, jprobe_saved_esp);
+			printk("Saved registers for jprobe %p\n", jp);
+			show_registers(saved_regs);
+			printk("Current registers\n");
+			show_registers(regs);
+			BUG();
+		}
+		*regs = jprobe_saved_regs;
+		memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack,
+		       MIN_STACK_SIZE(stack_addr));
+		return 1;
+	}
+	return 0;
+}
diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c
new file mode 100644
index 000000000000..bb50afbee921
--- /dev/null
+++ b/arch/i386/kernel/ldt.c
@@ -0,0 +1,255 @@
+/*
+ * linux/kernel/ldt.c
+ *
+ * Copyright (C) 1992 Krishna Balasubramanian and Linus Torvalds
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/ldt.h>
+#include <asm/desc.h>
+
+#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */
+static void flush_ldt(void *null)
+{
+	if (current->active_mm)
+		load_LDT(&current->active_mm->context);
+}
+#endif
+
+static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
+{
+	void *oldldt;
+	void *newldt;
+	int oldsize;
+
+	if (mincount <= pc->size)
+		return 0;
+	oldsize = pc->size;
+	mincount = (mincount+511)&(~511);
+	if (mincount*LDT_ENTRY_SIZE > PAGE_SIZE)
+		newldt = vmalloc(mincount*LDT_ENTRY_SIZE);
+	else
+		newldt = kmalloc(mincount*LDT_ENTRY_SIZE, GFP_KERNEL);
+
+	if (!newldt)
+		return -ENOMEM;
+
+	if (oldsize)
+		memcpy(newldt, pc->ldt, oldsize*LDT_ENTRY_SIZE);
+	oldldt = pc->ldt;
+	memset(newldt+oldsize*LDT_ENTRY_SIZE, 0, (mincount-oldsize)*LDT_ENTRY_SIZE);
+	pc->ldt = newldt;
+	wmb();
+	pc->size = mincount;
+	wmb();
+
+	if (reload) {
+#ifdef CONFIG_SMP
+		cpumask_t mask;
+		preempt_disable();
+		load_LDT(pc);
+		mask = cpumask_of_cpu(smp_processor_id());
+		if (!cpus_equal(current->mm->cpu_vm_mask, mask))
+			smp_call_function(flush_ldt, NULL, 1, 1);
+		preempt_enable();
+#else
+		load_LDT(pc);
+#endif
+	}
+	if (oldsize) {
+		if (oldsize*LDT_ENTRY_SIZE > PAGE_SIZE)
+			vfree(oldldt);
+		else
+			kfree(oldldt);
+	}
+	return 0;
+}
+
+static inline int copy_ldt(mm_context_t *new, mm_context_t *old)
+{
+	int err = alloc_ldt(new, old->size, 0);
+	if (err < 0)
+		return err;
+	memcpy(new->ldt, old->ldt, old->size*LDT_ENTRY_SIZE);
+	return 0;
+}
+
+/*
+ * we do not have to muck with descriptors here, that is
+ * done in switch_mm() as needed.
+ */
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	struct mm_struct * old_mm;
+	int retval = 0;
+
+	init_MUTEX(&mm->context.sem);
+	mm->context.size = 0;
+	old_mm = current->mm;
+	if (old_mm && old_mm->context.size > 0) {
+		down(&old_mm->context.sem);
+		retval = copy_ldt(&mm->context, &old_mm->context);
+		up(&old_mm->context.sem);
+	}
+	return retval;
+}
+
+/*
+ * No need to lock the MM as we are the last user
+ */
+void destroy_context(struct mm_struct *mm)
+{
+	if (mm->context.size) {
+		if (mm == current->active_mm)
+			clear_LDT();
+		if (mm->context.size*LDT_ENTRY_SIZE > PAGE_SIZE)
+			vfree(mm->context.ldt);
+		else
+			kfree(mm->context.ldt);
+		mm->context.size = 0;
+	}
+}
+
+static int read_ldt(void __user * ptr, unsigned long bytecount)
+{
+	int err;
+	unsigned long size;
+	struct mm_struct * mm = current->mm;
+
+	if (!mm->context.size)
+		return 0;
+	if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES)
+		bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES;
+
+	down(&mm->context.sem);
+	size = mm->context.size*LDT_ENTRY_SIZE;
+	if (size > bytecount)
+		size = bytecount;
+
+	err = 0;
+	if (copy_to_user(ptr, mm->context.ldt, size))
+		err = -EFAULT;
+	up(&mm->context.sem);
+	if (err < 0)
+		goto error_return;
+	if (size != bytecount) {
+		/* zero-fill the rest */
+		if (clear_user(ptr+size, bytecount-size) != 0) {
+			err = -EFAULT;
+			goto error_return;
+		}
+	}
+	return bytecount;
+error_return:
+	return err;
+}
+
+static int read_default_ldt(void __user * ptr, unsigned long bytecount)
+{
+	int err;
+	unsigned long size;
+	void *address;
+
+	err = 0;
+	address = &default_ldt[0];
+	size = 5*sizeof(struct desc_struct);
+	if (size > bytecount)
+		size = bytecount;
+
+	err = size;
+	if (copy_to_user(ptr, address, size))
+		err = -EFAULT;
+
+	return err;
+}
+
+static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode)
+{
+	struct mm_struct * mm = current->mm;
+	__u32 entry_1, entry_2, *lp;
+	int error;
+	struct user_desc ldt_info;
+
+	error = -EINVAL;
+	if (bytecount != sizeof(ldt_info))
+		goto out;
+	error = -EFAULT; 	
+	if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
+		goto out;
+
+	error = -EINVAL;
+	if (ldt_info.entry_number >= LDT_ENTRIES)
+		goto out;
+	if (ldt_info.contents == 3) {
+		if (oldmode)
+			goto out;
+		if (ldt_info.seg_not_present == 0)
+			goto out;
+	}
+
+	down(&mm->context.sem);
+	if (ldt_info.entry_number >= mm->context.size) {
+		error = alloc_ldt(&current->mm->context, ldt_info.entry_number+1, 1);
+		if (error < 0)
+			goto out_unlock;
+	}
+
+	lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->context.ldt);
+
+   	/* Allow LDTs to be cleared by the user. */
+   	if (ldt_info.base_addr == 0 && ldt_info.limit == 0) {
+		if (oldmode || LDT_empty(&ldt_info)) {
+			entry_1 = 0;
+			entry_2 = 0;
+			goto install;
+		}
+	}
+
+	entry_1 = LDT_entry_a(&ldt_info);
+	entry_2 = LDT_entry_b(&ldt_info);
+	if (oldmode)
+		entry_2 &= ~(1 << 20);
+
+	/* Install the new entry ...  */
+install:
+	*lp	= entry_1;
+	*(lp+1)	= entry_2;
+	error = 0;
+
+out_unlock:
+	up(&mm->context.sem);
+out:
+	return error;
+}
+
+asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
+{
+	int ret = -ENOSYS;
+
+	switch (func) {
+	case 0:
+		ret = read_ldt(ptr, bytecount);
+		break;
+	case 1:
+		ret = write_ldt(ptr, bytecount, 1);
+		break;
+	case 2:
+		ret = read_default_ldt(ptr, bytecount);
+		break;
+	case 0x11:
+		ret = write_ldt(ptr, bytecount, 0);
+		break;
+	}
+	return ret;
+}
diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c
new file mode 100644
index 000000000000..8600faeea29d
--- /dev/null
+++ b/arch/i386/kernel/mca.c
@@ -0,0 +1,474 @@
+/*
+ *  linux/arch/i386/kernel/mca.c
+ *  Written by Martin Kolinek, February 1996
+ *
+ * Changes:
+ *
+ *	Chris Beauregard July 28th, 1996
+ *	- Fixed up integrated SCSI detection
+ *
+ *	Chris Beauregard August 3rd, 1996
+ *	- Made mca_info local
+ *	- Made integrated registers accessible through standard function calls
+ *	- Added name field
+ *	- More sanity checking
+ *
+ *	Chris Beauregard August 9th, 1996
+ *	- Rewrote /proc/mca
+ *
+ *	Chris Beauregard January 7th, 1997
+ *	- Added basic NMI-processing
+ *	- Added more information to mca_info structure
+ *
+ *	David Weinehall October 12th, 1998
+ *	- Made a lot of cleaning up in the source
+ *	- Added use of save_flags / restore_flags
+ *	- Added the 'driver_loaded' flag in MCA_adapter
+ *	- Added an alternative implemention of ZP Gu's mca_find_unused_adapter
+ *
+ *	David Weinehall March 24th, 1999
+ *	- Fixed the output of 'Driver Installed' in /proc/mca/pos
+ *	- Made the Integrated Video & SCSI show up even if they have id 0000
+ *
+ *	Alexander Viro November 9th, 1999
+ *	- Switched to regular procfs methods
+ *
+ *	Alfred Arnold & David Weinehall August 23rd, 2000
+ *	- Added support for Planar POS-registers
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mca.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/proc_fs.h>
+#include <linux/mman.h>
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+#include <linux/init.h>
+#include <asm/arch_hooks.h>
+
+static unsigned char which_scsi = 0;
+
+int MCA_bus = 0;
+EXPORT_SYMBOL(MCA_bus);
+
+/*
+ * Motherboard register spinlock. Untested on SMP at the moment, but
+ * are there any MCA SMP boxes?
+ *
+ * Yes - Alan
+ */
+static DEFINE_SPINLOCK(mca_lock);
+
+/* Build the status info for the adapter */
+
+static void mca_configure_adapter_status(struct mca_device *mca_dev) {
+	mca_dev->status = MCA_ADAPTER_NONE;
+
+	mca_dev->pos_id = mca_dev->pos[0]
+		+ (mca_dev->pos[1] << 8);
+
+	if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
+
+		/* id = 0x0000 usually indicates hardware failure,
+		 * however, ZP Gu (zpg@castle.net> reports that his 9556
+		 * has 0x0000 as id and everything still works. There
+		 * also seem to be an adapter with id = 0x0000; the
+		 * NCR Parallel Bus Memory Card. Until this is confirmed,
+		 * however, this code will stay.
+		 */
+
+		mca_dev->status = MCA_ADAPTER_ERROR;
+
+		return;
+	} else if(mca_dev->pos_id != 0xffff) {
+
+		/* 0xffff usually indicates that there's no adapter,
+		 * however, some integrated adapters may have 0xffff as
+		 * their id and still be valid. Examples are on-board
+		 * VGA of the 55sx, the integrated SCSI of the 56 & 57,
+		 * and possibly also the 95 ULTIMEDIA.
+		 */
+
+		mca_dev->status = MCA_ADAPTER_NORMAL;
+	}
+
+	if((mca_dev->pos_id == 0xffff ||
+	    mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
+		int j;
+
+		for(j = 2; j < 8; j++) {
+			if(mca_dev->pos[j] != 0xff) {
+				mca_dev->status = MCA_ADAPTER_NORMAL;
+				break;
+			}
+		}
+	}
+
+	if(!(mca_dev->pos[2] & MCA_ENABLED)) {
+
+		/* enabled bit is in POS 2 */
+
+		mca_dev->status = MCA_ADAPTER_DISABLED;
+	}
+} /* mca_configure_adapter_status */
+
+/*--------------------------------------------------------------------*/
+
+static struct resource mca_standard_resources[] = {
+	{ .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" },
+	{ .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" },
+	{ .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" },
+	{ .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" },
+	{ .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" },
+	{ .start = 0x96, .end = 0x97, .name = "POS (MCA)" },
+	{ .start = 0x100, .end = 0x107, .name = "POS (MCA)" }
+};
+
+#define MCA_STANDARD_RESOURCES	(sizeof(mca_standard_resources)/sizeof(struct resource))
+
+/**
+ *	mca_read_and_store_pos - read the POS registers into a memory buffer
+ *      @pos: a char pointer to 8 bytes, contains the POS register value on
+ *            successful return
+ *
+ *	Returns 1 if a card actually exists (i.e. the pos isn't
+ *	all 0xff) or 0 otherwise
+ */
+static int mca_read_and_store_pos(unsigned char *pos) {
+	int j;
+	int found = 0;
+
+	for(j=0; j<8; j++) {
+		if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) {
+			/* 0xff all across means no device. 0x00 means
+			 * something's broken, but a device is
+			 * probably there.  However, if you get 0x00
+			 * from a motherboard register it won't matter
+			 * what we find.  For the record, on the
+			 * 57SLC, the integrated SCSI adapter has
+			 * 0xffff for the adapter ID, but nonzero for
+			 * other registers.  */
+
+			found = 1;
+		}
+	}
+	return found;
+}
+
+static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg)
+{
+	unsigned char byte;
+	unsigned long flags;
+
+	if(reg < 0 || reg >= 8)
+		return 0;
+
+	spin_lock_irqsave(&mca_lock, flags);
+	if(mca_dev->pos_register) {
+		/* Disable adapter setup, enable motherboard setup */
+
+		outb_p(0, MCA_ADAPTER_SETUP_REG);
+		outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+
+		byte = inb_p(MCA_POS_REG(reg));
+		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+	} else {
+
+		/* Make sure motherboard setup is off */
+
+		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+		/* Read the appropriate register */
+
+		outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG);
+		byte = inb_p(MCA_POS_REG(reg));
+		outb_p(0, MCA_ADAPTER_SETUP_REG);
+	}
+	spin_unlock_irqrestore(&mca_lock, flags);
+
+	mca_dev->pos[reg] = byte;
+
+	return byte;
+}
+
+static void mca_pc_write_pos(struct mca_device *mca_dev, int reg,
+			     unsigned char byte)
+{
+	unsigned long flags;
+
+	if(reg < 0 || reg >= 8)
+		return;
+
+	spin_lock_irqsave(&mca_lock, flags);
+
+	/* Make sure motherboard setup is off */
+
+	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+	/* Read in the appropriate register */
+
+	outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG);
+	outb_p(byte, MCA_POS_REG(reg));
+	outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+	spin_unlock_irqrestore(&mca_lock, flags);
+
+	/* Update the global register list, while we have the byte */
+
+	mca_dev->pos[reg] = byte;
+
+}
+
+/* for the primary MCA bus, we have identity transforms */
+static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq)
+{
+	return irq;
+}
+
+static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port)
+{
+	return port;
+}
+
+static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem)
+{
+	return mem;
+}
+
+
+static int __init mca_init(void)
+{
+	unsigned int i, j;
+	struct mca_device *mca_dev;
+	unsigned char pos[8];
+	short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
+	struct mca_bus *bus;
+
+	/* WARNING: Be careful when making changes here. Putting an adapter
+	 * and the motherboard simultaneously into setup mode may result in
+	 * damage to chips (according to The Indispensible PC Hardware Book
+	 * by Hans-Peter Messmer). Also, we disable system interrupts (so
+	 * that we are not disturbed in the middle of this).
+	 */
+
+	/* Make sure the MCA bus is present */
+
+	if (mca_system_init()) {
+		printk(KERN_ERR "MCA bus system initialisation failed\n");
+		return -ENODEV;
+	}
+
+	if (!MCA_bus)
+		return -ENODEV;
+
+	printk(KERN_INFO "Micro Channel bus detected.\n");
+
+	/* All MCA systems have at least a primary bus */
+	bus = mca_attach_bus(MCA_PRIMARY_BUS);
+	if (!bus)
+		goto out_nomem;
+	bus->default_dma_mask = 0xffffffffLL;
+	bus->f.mca_write_pos = mca_pc_write_pos;
+	bus->f.mca_read_pos = mca_pc_read_pos;
+	bus->f.mca_transform_irq = mca_dummy_transform_irq;
+	bus->f.mca_transform_ioport = mca_dummy_transform_ioport;
+	bus->f.mca_transform_memory = mca_dummy_transform_memory;
+
+	/* get the motherboard device */
+	mca_dev = kmalloc(sizeof(struct mca_device), GFP_KERNEL);
+	if(unlikely(!mca_dev))
+		goto out_nomem;
+	memset(mca_dev, 0, sizeof(struct mca_device));
+
+	/*
+	 * We do not expect many MCA interrupts during initialization,
+	 * but let us be safe:
+	 */
+	spin_lock_irq(&mca_lock);
+
+	/* Make sure adapter setup is off */
+
+	outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+	/* Read motherboard POS registers */
+
+	mca_dev->pos_register = 0x7f;
+	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+	mca_dev->name[0] = 0;
+	mca_read_and_store_pos(mca_dev->pos);
+	mca_configure_adapter_status(mca_dev);
+	/* fake POS and slot for a motherboard */
+	mca_dev->pos_id = MCA_MOTHERBOARD_POS;
+	mca_dev->slot = MCA_MOTHERBOARD;
+	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+
+	mca_dev = kmalloc(sizeof(struct mca_device), GFP_ATOMIC);
+	if(unlikely(!mca_dev))
+		goto out_unlock_nomem;
+	memset(mca_dev, 0, sizeof(struct mca_device));
+
+
+	/* Put motherboard into video setup mode, read integrated video
+	 * POS registers, and turn motherboard setup off.
+	 */
+
+	mca_dev->pos_register = 0xdf;
+	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
+	mca_dev->name[0] = 0;
+	mca_read_and_store_pos(mca_dev->pos);
+	mca_configure_adapter_status(mca_dev);
+	/* fake POS and slot for the integrated video */
+	mca_dev->pos_id = MCA_INTEGVIDEO_POS;
+	mca_dev->slot = MCA_INTEGVIDEO;
+	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+
+	/* Put motherboard into scsi setup mode, read integrated scsi
+	 * POS registers, and turn motherboard setup off.
+	 *
+	 * It seems there are two possible SCSI registers. Martin says that
+	 * for the 56,57, 0xf7 is the one, but fails on the 76.
+	 * Alfredo (apena@vnet.ibm.com) says
+	 * 0xfd works on his machine. We'll try both of them. I figure it's
+	 * a good bet that only one could be valid at a time. This could
+	 * screw up though if one is used for something else on the other
+	 * machine.
+	 */
+
+	for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
+		outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
+		if(mca_read_and_store_pos(pos))
+			break;
+	}
+	if(which_scsi) {
+		/* found a scsi card */
+		mca_dev = kmalloc(sizeof(struct mca_device), GFP_ATOMIC);
+		if(unlikely(!mca_dev))
+			goto out_unlock_nomem;
+		memset(mca_dev, 0, sizeof(struct mca_device));
+
+		for(j = 0; j < 8; j++)
+			mca_dev->pos[j] = pos[j];
+
+		mca_configure_adapter_status(mca_dev);
+		/* fake POS and slot for integrated SCSI controller */
+		mca_dev->pos_id = MCA_INTEGSCSI_POS;
+		mca_dev->slot = MCA_INTEGSCSI;
+		mca_dev->pos_register = which_scsi;
+		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+	}
+
+	/* Turn off motherboard setup */
+
+	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
+
+	/* Now loop over MCA slots: put each adapter into setup mode, and
+	 * read its POS registers. Then put adapter setup off.
+	 */
+
+	for(i=0; i<MCA_MAX_SLOT_NR; i++) {
+		outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
+		if(!mca_read_and_store_pos(pos))
+			continue;
+
+		mca_dev = kmalloc(sizeof(struct mca_device), GFP_ATOMIC);
+		if(unlikely(!mca_dev))
+			goto out_unlock_nomem;
+		memset(mca_dev, 0, sizeof(struct mca_device));
+
+		for(j=0; j<8; j++)
+			mca_dev->pos[j]=pos[j];
+
+		mca_dev->driver_loaded = 0;
+		mca_dev->slot = i;
+		mca_dev->pos_register = 0;
+		mca_configure_adapter_status(mca_dev);
+		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
+	}
+	outb_p(0, MCA_ADAPTER_SETUP_REG);
+
+	/* Enable interrupts and return memory start */
+	spin_unlock_irq(&mca_lock);
+
+	for (i = 0; i < MCA_STANDARD_RESOURCES; i++)
+		request_resource(&ioport_resource, mca_standard_resources + i);
+
+	mca_do_proc_init();
+
+	return 0;
+
+ out_unlock_nomem:
+	spin_unlock_irq(&mca_lock);
+ out_nomem:
+	printk(KERN_EMERG "Failed memory allocation in MCA setup!\n");
+	return -ENOMEM;
+}
+
+subsys_initcall(mca_init);
+
+/*--------------------------------------------------------------------*/
+
+static void mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag)
+{
+	int slot = mca_dev->slot;
+
+	if(slot == MCA_INTEGSCSI) {
+		printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
+			mca_dev->name);
+	} else if(slot == MCA_INTEGVIDEO) {
+		printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
+			mca_dev->name);
+	} else if(slot == MCA_MOTHERBOARD) {
+		printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
+			mca_dev->name);
+	}
+
+	/* More info available in POS 6 and 7? */
+
+	if(check_flag) {
+		unsigned char pos6, pos7;
+
+		pos6 = mca_device_read_pos(mca_dev, 6);
+		pos7 = mca_device_read_pos(mca_dev, 7);
+
+		printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7);
+	}
+
+} /* mca_handle_nmi_slot */
+
+/*--------------------------------------------------------------------*/
+
+static int mca_handle_nmi_callback(struct device *dev, void *data)
+{
+	struct mca_device *mca_dev = to_mca_device(dev);
+	unsigned char pos5;
+
+	pos5 = mca_device_read_pos(mca_dev, 5);
+
+	if(!(pos5 & 0x80)) {
+		/* Bit 7 of POS 5 is reset when this adapter has a hardware
+		 * error. Bit 7 it reset if there's error information
+		 * available in POS 6 and 7.
+		 */
+		mca_handle_nmi_device(mca_dev, !(pos5 & 0x40));
+		return 1;
+	}
+	return 0;
+}
+
+void mca_handle_nmi(void)
+{
+	/* First try - scan the various adapters and see if a specific
+	 * adapter was responsible for the error.
+	 */
+	bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
+
+	mca_nmi_hook();
+} /* mca_handle_nmi */
diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c
new file mode 100644
index 000000000000..a77c612aad00
--- /dev/null
+++ b/arch/i386/kernel/microcode.c
@@ -0,0 +1,512 @@
+/*
+ *	Intel CPU Microcode Update Driver for Linux
+ *
+ *	Copyright (C) 2000-2004 Tigran Aivazian
+ *
+ *	This driver allows to upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II, 
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual, 
+ *	Order Number 245472 or free download from:
+ *		
+ *	http://developer.intel.com/design/pentium4/manuals/245472.htm
+ *
+ *	For more information, go to http://www.urbanmyth.org/microcode
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	1.0	16 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Initial release.
+ *	1.01	18 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added read() support + cleanups.
+ *	1.02	21 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added 'device trimming' support. open(O_WRONLY) zeroes
+ *		and frees the saved copy of applied microcode.
+ *	1.03	29 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Made to use devfs (/dev/cpu/microcode) + cleanups.
+ *	1.04	06 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Added misc device support (now uses both devfs and misc).
+ *		Added MICROCODE_IOCFREE ioctl to clear memory.
+ *	1.05	09 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Messages for error cases (non Intel & no suitable microcode).
+ *	1.06	03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->release(). Removed exclusive open and status bitmap.
+ *		Added microcode_rwsem to serialize read()/write()/ioctl().
+ *		Removed global kernel lock usage.
+ *	1.07	07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Write 0 to 0x8B msr and then cpuid before reading revision,
+ *		so that it works even if there were no update done by the
+ *		BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ *		to be 0 on my machine which is why it worked even when I
+ *		disabled update by the BIOS)
+ *		Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
+ *	1.08	11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
+ *			     Tigran Aivazian <tigran@veritas.com>
+ *		Intel Pentium 4 processor support and bugfixes.
+ *	1.09	30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
+ *		Bugfix for HT (Hyper-Threading) enabled processors
+ *		whereby processor resources are shared by all logical processors
+ *		in a single CPU package.
+ *	1.10	28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
+ *		Tigran Aivazian <tigran@veritas.com>,
+ *		Serialize updates as required on HT processors due to speculative
+ *		nature of implementation.
+ *	1.11	22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
+ *		Fix the panic when writing zero-length microcode chunk.
+ *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, 
+ *		Jun Nakajima <jun.nakajima@intel.com>
+ *		Support for the microcode updates in the new format.
+ *	1.13	10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ *		because we no longer hold a copy of applied microcode 
+ *		in kernel memory.
+ *	1.14	25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
+ *		Fix sigmatch() macro to handle old CPUs with pf == 0.
+ *		Thanks to Stuart Swales for pointing out this bug.
+ */
+
+//#define DEBUG /* pr_debug */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+
+MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@veritas.com>");
+MODULE_LICENSE("GPL");
+
+#define MICROCODE_VERSION 	"1.14"
+
+#define DEFAULT_UCODE_DATASIZE 	(2000) 	  /* 2000 bytes */
+#define MC_HEADER_SIZE		(sizeof (microcode_header_t))  	  /* 48 bytes */
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */
+#define EXT_HEADER_SIZE		(sizeof (struct extended_sigtable)) /* 20 bytes */
+#define EXT_SIGNATURE_SIZE	(sizeof (struct extended_signature)) /* 12 bytes */
+#define DWSIZE			(sizeof (u32))
+#define get_totalsize(mc) \
+	(((microcode_t *)mc)->hdr.totalsize ? \
+	 ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE)
+#define get_datasize(mc) \
+	(((microcode_t *)mc)->hdr.datasize ? \
+	 ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
+
+#define sigmatch(s1, s2, p1, p2) \
+	(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
+
+#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
+
+/* serialize access to the physical write to MSR 0x79 */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
+static DECLARE_MUTEX(microcode_sem);
+
+static void __user *user_buffer;	/* user area microcode data buffer */
+static unsigned int user_buffer_size;	/* it's size */
+
+typedef enum mc_error_code {
+	MC_SUCCESS 	= 0,
+	MC_NOTFOUND 	= 1,
+	MC_MARKED 	= 2,
+	MC_ALLOCATED 	= 3,
+} mc_error_code_t;
+
+static struct ucode_cpu_info {
+	unsigned int sig;
+	unsigned int pf;
+	unsigned int rev;
+	unsigned int cksum;
+	mc_error_code_t err;
+	microcode_t *mc;
+} ucode_cpu_info[NR_CPUS];
+				
+static int microcode_open (struct inode *unused1, struct file *unused2)
+{
+	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
+}
+
+static void collect_cpu_info (void *unused)
+{
+	int cpu_num = smp_processor_id();
+	struct cpuinfo_x86 *c = cpu_data + cpu_num;
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+	unsigned int val[2];
+
+	uci->sig = uci->pf = uci->rev = uci->cksum = 0;
+	uci->err = MC_NOTFOUND; 
+	uci->mc = NULL;
+
+	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+	    	cpu_has(c, X86_FEATURE_IA64)) {
+		printk(KERN_ERR "microcode: CPU%d not a capable Intel processor\n", cpu_num);
+		return;
+	} else {
+		uci->sig = cpuid_eax(0x00000001);
+
+		if ((c->x86_model >= 5) || (c->x86 > 6)) {
+			/* get processor flags from MSR 0x17 */
+			rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+			uci->pf = 1 << ((val[1] >> 18) & 7);
+		}
+	}
+
+	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+	__asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx");
+	/* get the current revision from MSR 0x8B */
+	rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev);
+	pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
+			uci->sig, uci->pf, uci->rev);
+}
+
+static inline void mark_microcode_update (int cpu_num, microcode_header_t *mc_header, int sig, int pf, int cksum)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+
+	pr_debug("Microcode Found.\n");
+	pr_debug("   Header Revision 0x%x\n", mc_header->hdrver);
+	pr_debug("   Loader Revision 0x%x\n", mc_header->ldrver);
+	pr_debug("   Revision 0x%x \n", mc_header->rev);
+	pr_debug("   Date %x/%x/%x\n",
+		((mc_header->date >> 24 ) & 0xff),
+		((mc_header->date >> 16 ) & 0xff),
+		(mc_header->date & 0xFFFF));
+	pr_debug("   Signature 0x%x\n", sig);
+	pr_debug("   Type 0x%x Family 0x%x Model 0x%x Stepping 0x%x\n",
+		((sig >> 12) & 0x3),
+		((sig >> 8) & 0xf),
+		((sig >> 4) & 0xf),
+		((sig & 0xf)));
+	pr_debug("   Processor Flags 0x%x\n", pf);
+	pr_debug("   Checksum 0x%x\n", cksum);
+
+	if (mc_header->rev < uci->rev) {
+		printk(KERN_ERR "microcode: CPU%d not 'upgrading' to earlier revision"
+		       " 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev);
+		goto out;
+	} else if (mc_header->rev == uci->rev) {
+		/* notify the caller of success on this cpu */
+		uci->err = MC_SUCCESS;
+		printk(KERN_ERR "microcode: CPU%d already at revision"
+			" 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev);
+		goto out;
+	}
+
+	pr_debug("microcode: CPU%d found a matching microcode update with "
+		" revision 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev);
+	uci->cksum = cksum;
+	uci->pf = pf; /* keep the original mc pf for cksum calculation */
+	uci->err = MC_MARKED; /* found the match */
+out:
+	return;
+}
+
+static int find_matching_ucodes (void) 
+{
+	int cursor = 0;
+	int error = 0;
+
+	while (cursor + MC_HEADER_SIZE < user_buffer_size) {
+		microcode_header_t mc_header;
+		void *newmc = NULL;
+		int i, sum, cpu_num, allocated_flag, total_size, data_size, ext_table_size;
+
+		if (copy_from_user(&mc_header, user_buffer + cursor, MC_HEADER_SIZE)) {
+			printk(KERN_ERR "microcode: error! Can not read user data\n");
+			error = -EFAULT;
+			goto out;
+		}
+
+		total_size = get_totalsize(&mc_header);
+		if ((cursor + total_size > user_buffer_size) || (total_size < DEFAULT_UCODE_TOTALSIZE)) {
+			printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+			error = -EINVAL;
+			goto out;
+		}
+
+		data_size = get_datasize(&mc_header);
+		if ((data_size + MC_HEADER_SIZE > total_size) || (data_size < DEFAULT_UCODE_DATASIZE)) {
+			printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+			error = -EINVAL;
+			goto out;
+		}
+
+		if (mc_header.ldrver != 1 || mc_header.hdrver != 1) {
+			printk(KERN_ERR "microcode: error! Unknown microcode update format\n");
+			error = -EINVAL;
+			goto out;
+		}
+		
+		for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+			struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+			if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
+				continue;
+
+			if (sigmatch(mc_header.sig, uci->sig, mc_header.pf, uci->pf))
+				mark_microcode_update(cpu_num, &mc_header, mc_header.sig, mc_header.pf, mc_header.cksum);
+		}
+
+		ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+		if (ext_table_size) {
+			struct extended_sigtable ext_header;
+			struct extended_signature ext_sig;
+			int ext_sigcount;
+
+			if ((ext_table_size < EXT_HEADER_SIZE) 
+					|| ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+				printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+				error = -EINVAL;
+				goto out;
+			}
+			if (copy_from_user(&ext_header, user_buffer + cursor 
+					+ MC_HEADER_SIZE + data_size, EXT_HEADER_SIZE)) {
+				printk(KERN_ERR "microcode: error! Can not read user data\n");
+				error = -EFAULT;
+				goto out;
+			}
+			if (ext_table_size != exttable_size(&ext_header)) {
+				printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+				error = -EFAULT;
+				goto out;
+			}
+
+			ext_sigcount = ext_header.count;
+			
+			for (i = 0; i < ext_sigcount; i++) {
+				if (copy_from_user(&ext_sig, user_buffer + cursor + MC_HEADER_SIZE + data_size + EXT_HEADER_SIZE 
+						+ EXT_SIGNATURE_SIZE * i, EXT_SIGNATURE_SIZE)) {
+					printk(KERN_ERR "microcode: error! Can not read user data\n");
+					error = -EFAULT;
+					goto out;
+				}
+				for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+					struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+					if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
+						continue;
+					if (sigmatch(ext_sig.sig, uci->sig, ext_sig.pf, uci->pf)) {
+						mark_microcode_update(cpu_num, &mc_header, ext_sig.sig, ext_sig.pf, ext_sig.cksum);
+					}
+				}
+			}
+		}
+		/* now check if any cpu has matched */
+		for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) {
+			if (ucode_cpu_info[cpu_num].err == MC_MARKED) { 
+				struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+				if (!allocated_flag) {
+					allocated_flag = 1;
+					newmc = vmalloc(total_size);
+					if (!newmc) {
+						printk(KERN_ERR "microcode: error! Can not allocate memory\n");
+						error = -ENOMEM;
+						goto out;
+					}
+					if (copy_from_user(newmc + MC_HEADER_SIZE, 
+								user_buffer + cursor + MC_HEADER_SIZE, 
+								total_size - MC_HEADER_SIZE)) {
+						printk(KERN_ERR "microcode: error! Can not read user data\n");
+						vfree(newmc);
+						error = -EFAULT;
+						goto out;
+					}
+					memcpy(newmc, &mc_header, MC_HEADER_SIZE);
+					/* check extended table checksum */
+					if (ext_table_size) {
+						int ext_table_sum = 0;
+						int * ext_tablep = (((void *) newmc) + MC_HEADER_SIZE + data_size);
+						i = ext_table_size / DWSIZE;
+						while (i--) ext_table_sum += ext_tablep[i];
+						if (ext_table_sum) {
+							printk(KERN_WARNING "microcode: aborting, bad extended signature table checksum\n");
+							vfree(newmc);
+							error = -EINVAL;
+							goto out;
+						}
+					}
+
+					/* calculate the checksum */
+					i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+					while (i--) sum += ((int *)newmc)[i];
+					sum -= (mc_header.sig + mc_header.pf + mc_header.cksum);
+				}
+				ucode_cpu_info[cpu_num].mc = newmc;
+				ucode_cpu_info[cpu_num].err = MC_ALLOCATED; /* mc updated */
+				if (sum + uci->sig + uci->pf + uci->cksum != 0) {
+					printk(KERN_ERR "microcode: CPU%d aborting, bad checksum\n", cpu_num);
+					error = -EINVAL;
+					goto out;
+				}
+			}
+		}
+		cursor += total_size; /* goto the next update patch */
+	} /* end of while */
+out:
+	return error;
+}
+
+static void do_update_one (void * unused)
+{
+	unsigned long flags;
+	unsigned int val[2];
+	int cpu_num = smp_processor_id();
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+
+	if (uci->mc == NULL) {
+		printk(KERN_INFO "microcode: No new microcode data for CPU%d\n", cpu_num);
+		return;
+	}
+
+	/* serialize access to the physical write to MSR 0x79 */
+	spin_lock_irqsave(&microcode_update_lock, flags);          
+
+	/* write microcode via MSR 0x79 */
+	wrmsr(MSR_IA32_UCODE_WRITE,
+		(unsigned long) uci->mc->bits, 
+		(unsigned long) uci->mc->bits >> 16 >> 16);
+	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+	__asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx");
+	/* get the current revision from MSR 0x8B */
+	rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+
+	/* notify the caller of success on this cpu */
+	uci->err = MC_SUCCESS;
+	spin_unlock_irqrestore(&microcode_update_lock, flags);
+	printk(KERN_INFO "microcode: CPU%d updated from revision "
+	       "0x%x to 0x%x, date = %08x \n", 
+	       cpu_num, uci->rev, val[1], uci->mc->hdr.date);
+	return;
+}
+
+static int do_microcode_update (void)
+{
+	int i, error;
+
+	if (on_each_cpu(collect_cpu_info, NULL, 1, 1) != 0) {
+		printk(KERN_ERR "microcode: Error! Could not run on all processors\n");
+		error = -EIO;
+		goto out;
+	}
+
+	if ((error = find_matching_ucodes())) {
+		printk(KERN_ERR "microcode: Error in the microcode data\n");
+		goto out_free;
+	}
+
+	if (on_each_cpu(do_update_one, NULL, 1, 1) != 0) {
+		printk(KERN_ERR "microcode: Error! Could not run on all processors\n");
+		error = -EIO;
+	}
+
+out_free:
+	for (i = 0; i < num_online_cpus(); i++) {
+		if (ucode_cpu_info[i].mc) {
+			int j;
+			void *tmp = ucode_cpu_info[i].mc;
+			vfree(tmp);
+			for (j = i; j < num_online_cpus(); j++) {
+				if (ucode_cpu_info[j].mc == tmp)
+					ucode_cpu_info[j].mc = NULL;
+			}
+		}
+	}
+out:
+	return error;
+}
+
+static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
+{
+	ssize_t ret;
+
+	if (len < DEFAULT_UCODE_TOTALSIZE) {
+		printk(KERN_ERR "microcode: not enough data\n"); 
+		return -EINVAL;
+	}
+
+	if ((len >> PAGE_SHIFT) > num_physpages) {
+		printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages);
+		return -EINVAL;
+	}
+
+	down(&microcode_sem);
+
+	user_buffer = (void __user *) buf;
+	user_buffer_size = (int) len;
+
+	ret = do_microcode_update();
+	if (!ret)
+		ret = (ssize_t)len;
+
+	up(&microcode_sem);
+
+	return ret;
+}
+
+static int microcode_ioctl (struct inode *inode, struct file *file, 
+		unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+		/* 
+		 *  XXX: will be removed after microcode_ctl 
+		 *  is updated to ignore failure of this ioctl()
+		 */
+		case MICROCODE_IOCFREE:
+			return 0;
+		default:
+			return -EINVAL;
+	}
+	return -EINVAL;
+}
+
+static struct file_operations microcode_fops = {
+	.owner		= THIS_MODULE,
+	.write		= microcode_write,
+	.ioctl		= microcode_ioctl,
+	.open		= microcode_open,
+};
+
+static struct miscdevice microcode_dev = {
+	.minor		= MICROCODE_MINOR,
+	.name		= "microcode",
+	.devfs_name	= "cpu/microcode",
+	.fops		= &microcode_fops,
+};
+
+static int __init microcode_init (void)
+{
+	int error;
+
+	error = misc_register(&microcode_dev);
+	if (error) {
+		printk(KERN_ERR
+			"microcode: can't misc_register on minor=%d\n",
+			MICROCODE_MINOR);
+		return error;
+	}
+
+	printk(KERN_INFO 
+		"IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@veritas.com>\n");
+	return 0;
+}
+
+static void __exit microcode_exit (void)
+{
+	misc_deregister(&microcode_dev);
+	printk(KERN_INFO "IA-32 Microcode Update Driver v" MICROCODE_VERSION " unregistered\n");
+}
+
+module_init(microcode_init)
+module_exit(microcode_exit)
+MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
diff --git a/arch/i386/kernel/module.c b/arch/i386/kernel/module.c
new file mode 100644
index 000000000000..5149c8a621f0
--- /dev/null
+++ b/arch/i386/kernel/module.c
@@ -0,0 +1,129 @@
+/*  Kernel module help for i386.
+    Copyright (C) 2001 Rusty Russell.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt...)
+#endif
+
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+	return vmalloc_exec(size);
+}
+
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+	/* FIXME: If module_region == mod->init_region, trim exception
+           table entries. */
+}
+
+/* We don't need anything special. */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+			      Elf_Shdr *sechdrs,
+			      char *secstrings,
+			      struct module *mod)
+{
+	return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *me)
+{
+	unsigned int i;
+	Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym;
+	uint32_t *location;
+
+	DEBUGP("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+			+ ELF32_R_SYM(rel[i].r_info);
+
+		switch (ELF32_R_TYPE(rel[i].r_info)) {
+		case R_386_32:
+			/* We add the value into the location given */
+			*location += sym->st_value;
+			break;
+		case R_386_PC32:
+			/* Add the value, subtract its postition */
+			*location += sym->st_value - (uint32_t)location;
+			break;
+		default:
+			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+			       me->name, ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *me)
+{
+	printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
+	       me->name);
+	return -ENOEXEC;
+}
+
+extern void apply_alternatives(void *start, void *end); 
+
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
+{
+	const Elf_Shdr *s;
+	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	/* look for .altinstructions to patch */ 
+	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { 
+		void *seg; 		
+		if (strcmp(".altinstructions", secstrings + s->sh_name))
+			continue;
+		seg = (void *)s->sh_addr; 
+		apply_alternatives(seg, seg + s->sh_size); 
+	} 	
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
new file mode 100644
index 000000000000..1347ab4939e7
--- /dev/null
+++ b/arch/i386/kernel/mpparse.c
@@ -0,0 +1,1109 @@
+/*
+ *	Intel Multiprocessor Specification 1.1 and 1.4
+ *	compliant MP-table parsing routines.
+ *
+ *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ *	Fixes
+ *		Erich Boleyn	:	MP v1.4 and additional changes.
+ *		Alan Cox	:	Added EBDA scanning
+ *		Ingo Molnar	:	various cleanups and rewrites
+ *		Maciej W. Rozycki:	Bits for default MP configurations
+ *		Paul Diefenbaugh:	Added full ACPI support
+ */
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bitops.h>
+
+#include <asm/smp.h>
+#include <asm/acpi.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/io_apic.h>
+
+#include <mach_apic.h>
+#include <mach_mpparse.h>
+#include <bios_ebda.h>
+
+/* Have we found an MP table */
+int smp_found_config;
+unsigned int __initdata maxcpus = NR_CPUS;
+
+/*
+ * Various Linux-internal data structures created from the
+ * MP-table.
+ */
+int apic_version [MAX_APICS];
+int mp_bus_id_to_type [MAX_MP_BUSSES];
+int mp_bus_id_to_node [MAX_MP_BUSSES];
+int mp_bus_id_to_local [MAX_MP_BUSSES];
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
+static int mp_current_pci_id;
+
+/* I/O APIC entries */
+struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+
+/* # of MP IRQ source entries */
+struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* MP IRQ source entries */
+int mp_irq_entries;
+
+int nr_ioapics;
+
+int pic_mode;
+unsigned long mp_lapic_addr;
+
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+unsigned int boot_cpu_logical_apicid = -1U;
+/* Internal processor count */
+static unsigned int __initdata num_processors;
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+
+u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
+
+/*
+ * Intel MP BIOS table parsing routines:
+ */
+
+
+/*
+ * Checksum an MP configuration block.
+ */
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+	int sum = 0;
+
+	while (len--)
+		sum += *mp++;
+
+	return sum & 0xFF;
+}
+
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+
+static int mpc_record; 
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __initdata;
+
+#ifdef CONFIG_X86_NUMAQ
+static int MP_valid_apicid(int apicid, int version)
+{
+	return hweight_long(apicid & 0xf) == 1 && (apicid >> 4) != 0xf;
+}
+#else
+static int MP_valid_apicid(int apicid, int version)
+{
+	if (version >= 0x14)
+		return apicid < 0xff;
+	else
+		return apicid < 0xf;
+}
+#endif
+
+static void __init MP_processor_info (struct mpc_config_processor *m)
+{
+ 	int ver, apicid;
+	physid_mask_t tmp;
+ 	
+	if (!(m->mpc_cpuflag & CPU_ENABLED))
+		return;
+
+	apicid = mpc_apic_id(m, translation_table[mpc_record]);
+
+	if (m->mpc_featureflag&(1<<0))
+		Dprintk("    Floating point unit present.\n");
+	if (m->mpc_featureflag&(1<<7))
+		Dprintk("    Machine Exception supported.\n");
+	if (m->mpc_featureflag&(1<<8))
+		Dprintk("    64 bit compare & exchange supported.\n");
+	if (m->mpc_featureflag&(1<<9))
+		Dprintk("    Internal APIC present.\n");
+	if (m->mpc_featureflag&(1<<11))
+		Dprintk("    SEP present.\n");
+	if (m->mpc_featureflag&(1<<12))
+		Dprintk("    MTRR  present.\n");
+	if (m->mpc_featureflag&(1<<13))
+		Dprintk("    PGE  present.\n");
+	if (m->mpc_featureflag&(1<<14))
+		Dprintk("    MCA  present.\n");
+	if (m->mpc_featureflag&(1<<15))
+		Dprintk("    CMOV  present.\n");
+	if (m->mpc_featureflag&(1<<16))
+		Dprintk("    PAT  present.\n");
+	if (m->mpc_featureflag&(1<<17))
+		Dprintk("    PSE  present.\n");
+	if (m->mpc_featureflag&(1<<18))
+		Dprintk("    PSN  present.\n");
+	if (m->mpc_featureflag&(1<<19))
+		Dprintk("    Cache Line Flush Instruction present.\n");
+	/* 20 Reserved */
+	if (m->mpc_featureflag&(1<<21))
+		Dprintk("    Debug Trace and EMON Store present.\n");
+	if (m->mpc_featureflag&(1<<22))
+		Dprintk("    ACPI Thermal Throttle Registers  present.\n");
+	if (m->mpc_featureflag&(1<<23))
+		Dprintk("    MMX  present.\n");
+	if (m->mpc_featureflag&(1<<24))
+		Dprintk("    FXSR  present.\n");
+	if (m->mpc_featureflag&(1<<25))
+		Dprintk("    XMM  present.\n");
+	if (m->mpc_featureflag&(1<<26))
+		Dprintk("    Willamette New Instructions  present.\n");
+	if (m->mpc_featureflag&(1<<27))
+		Dprintk("    Self Snoop  present.\n");
+	if (m->mpc_featureflag&(1<<28))
+		Dprintk("    HT  present.\n");
+	if (m->mpc_featureflag&(1<<29))
+		Dprintk("    Thermal Monitor present.\n");
+	/* 30, 31 Reserved */
+
+
+	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+		Dprintk("    Bootup CPU\n");
+		boot_cpu_physical_apicid = m->mpc_apicid;
+		boot_cpu_logical_apicid = apicid;
+	}
+
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+			"  Processor ignored.\n", NR_CPUS); 
+		return;
+	}
+
+	if (num_processors >= maxcpus) {
+		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+			" Processor ignored.\n", maxcpus); 
+		return;
+	}
+	num_processors++;
+	ver = m->mpc_apicver;
+
+	if (!MP_valid_apicid(apicid, ver)) {
+		printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n",
+			m->mpc_apicid, MAX_APICS);
+		--num_processors;
+		return;
+	}
+
+	tmp = apicid_to_cpu_present(apicid);
+	physids_or(phys_cpu_present_map, phys_cpu_present_map, tmp);
+	
+	/*
+	 * Validate version
+	 */
+	if (ver == 0x0) {
+		printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid);
+		ver = 0x10;
+	}
+	apic_version[m->mpc_apicid] = ver;
+	bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
+}
+
+static void __init MP_bus_info (struct mpc_config_bus *m)
+{
+	char str[7];
+
+	memcpy(str, m->mpc_bustype, 6);
+	str[6] = 0;
+
+	mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+
+	if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
+		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
+	} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {
+		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
+	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) {
+		mpc_oem_pci_bus(m, translation_table[mpc_record]);
+		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
+		mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
+		mp_current_pci_id++;
+	} else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
+		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
+	} else if (strncmp(str, BUSTYPE_NEC98, sizeof(BUSTYPE_NEC98)-1) == 0) {
+		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_NEC98;
+	} else {
+		printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
+	}
+}
+
+static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
+{
+	if (!(m->mpc_flags & MPC_APIC_USABLE))
+		return;
+
+	printk(KERN_INFO "I/O APIC #%d Version %d at 0x%lX.\n",
+		m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
+	if (nr_ioapics >= MAX_IO_APICS) {
+		printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n",
+			MAX_IO_APICS, nr_ioapics);
+		panic("Recompile kernel with bigger MAX_IO_APICS!.\n");
+	}
+	if (!m->mpc_apicaddr) {
+		printk(KERN_ERR "WARNING: bogus zero I/O APIC address"
+			" found in MP table, skipping!\n");
+		return;
+	}
+	mp_ioapics[nr_ioapics] = *m;
+	nr_ioapics++;
+}
+
+static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
+{
+	mp_irqs [mp_irq_entries] = *m;
+	Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
+		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
+			m->mpc_irqtype, m->mpc_irqflag & 3,
+			(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
+			m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!!\n");
+}
+
+static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
+{
+	Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
+		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
+			m->mpc_irqtype, m->mpc_irqflag & 3,
+			(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
+			m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
+	/*
+	 * Well it seems all SMP boards in existence
+	 * use ExtINT/LVT1 == LINT0 and
+	 * NMI/LVT2 == LINT1 - the following check
+	 * will show us if this assumptions is false.
+	 * Until then we do not have to add baggage.
+	 */
+	if ((m->mpc_irqtype == mp_ExtINT) &&
+		(m->mpc_destapiclint != 0))
+			BUG();
+	if ((m->mpc_irqtype == mp_NMI) &&
+		(m->mpc_destapiclint != 1))
+			BUG();
+}
+
+#ifdef CONFIG_X86_NUMAQ
+static void __init MP_translation_info (struct mpc_config_translation *m)
+{
+	printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
+
+	if (mpc_record >= MAX_MPC_ENTRY) 
+		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+	else
+		translation_table[mpc_record] = m; /* stash this for later */
+	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+		node_set_online(m->trans_quad);
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \
+	unsigned short oemsize)
+{
+	int count = sizeof (*oemtable); /* the header size */
+	unsigned char *oemptr = ((unsigned char *)oemtable)+count;
+	
+	mpc_record = 0;
+	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
+	if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4))
+	{
+		printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+			oemtable->oem_signature[0],
+			oemtable->oem_signature[1],
+			oemtable->oem_signature[2],
+			oemtable->oem_signature[3]);
+		return;
+	}
+	if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length))
+	{
+		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+		return;
+	}
+	while (count < oemtable->oem_length) {
+		switch (*oemptr) {
+			case MP_TRANSLATION:
+			{
+				struct mpc_config_translation *m=
+					(struct mpc_config_translation *)oemptr;
+				MP_translation_info(m);
+				oemptr += sizeof(*m);
+				count += sizeof(*m);
+				++mpc_record;
+				break;
+			}
+			default:
+			{
+				printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr);
+				return;
+			}
+		}
+       }
+}
+
+static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
+		char *productid)
+{
+	if (strncmp(oem, "IBM NUMA", 8))
+		printk("Warning!  May not be a NUMA-Q system!\n");
+	if (mpc->mpc_oemptr)
+		smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr,
+				mpc->mpc_oemsize);
+}
+#endif	/* CONFIG_X86_NUMAQ */
+
+/*
+ * Read/parse the MPC
+ */
+
+static int __init smp_read_mpc(struct mp_config_table *mpc)
+{
+	char str[16];
+	char oem[10];
+	int count=sizeof(*mpc);
+	unsigned char *mpt=((unsigned char *)mpc)+count;
+
+	if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
+		printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n",
+			*(u32 *)mpc->mpc_signature);
+		return 0;
+	}
+	if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
+		printk(KERN_ERR "SMP mptable: checksum error!\n");
+		return 0;
+	}
+	if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
+		printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
+			mpc->mpc_spec);
+		return 0;
+	}
+	if (!mpc->mpc_lapic) {
+		printk(KERN_ERR "SMP mptable: null local APIC address!\n");
+		return 0;
+	}
+	memcpy(oem,mpc->mpc_oem,8);
+	oem[8]=0;
+	printk(KERN_INFO "OEM ID: %s ",oem);
+
+	memcpy(str,mpc->mpc_productid,12);
+	str[12]=0;
+	printk("Product ID: %s ",str);
+
+	mps_oem_check(mpc, oem, str);
+
+	printk("APIC at: 0x%lX\n",mpc->mpc_lapic);
+
+	/* 
+	 * Save the local APIC address (it might be non-default) -- but only
+	 * if we're not using ACPI.
+	 */
+	if (!acpi_lapic)
+		mp_lapic_addr = mpc->mpc_lapic;
+
+	/*
+	 *	Now process the configuration blocks.
+	 */
+	mpc_record = 0;
+	while (count < mpc->mpc_length) {
+		switch(*mpt) {
+			case MP_PROCESSOR:
+			{
+				struct mpc_config_processor *m=
+					(struct mpc_config_processor *)mpt;
+				/* ACPI may have already provided this data */
+				if (!acpi_lapic)
+					MP_processor_info(m);
+				mpt += sizeof(*m);
+				count += sizeof(*m);
+				break;
+			}
+			case MP_BUS:
+			{
+				struct mpc_config_bus *m=
+					(struct mpc_config_bus *)mpt;
+				MP_bus_info(m);
+				mpt += sizeof(*m);
+				count += sizeof(*m);
+				break;
+			}
+			case MP_IOAPIC:
+			{
+				struct mpc_config_ioapic *m=
+					(struct mpc_config_ioapic *)mpt;
+				MP_ioapic_info(m);
+				mpt+=sizeof(*m);
+				count+=sizeof(*m);
+				break;
+			}
+			case MP_INTSRC:
+			{
+				struct mpc_config_intsrc *m=
+					(struct mpc_config_intsrc *)mpt;
+
+				MP_intsrc_info(m);
+				mpt+=sizeof(*m);
+				count+=sizeof(*m);
+				break;
+			}
+			case MP_LINTSRC:
+			{
+				struct mpc_config_lintsrc *m=
+					(struct mpc_config_lintsrc *)mpt;
+				MP_lintsrc_info(m);
+				mpt+=sizeof(*m);
+				count+=sizeof(*m);
+				break;
+			}
+			default:
+			{
+				count = mpc->mpc_length;
+				break;
+			}
+		}
+		++mpc_record;
+	}
+	clustered_apic_check();
+	if (!num_processors)
+		printk(KERN_ERR "SMP mptable: no processors registered!\n");
+	return num_processors;
+}
+
+static int __init ELCR_trigger(unsigned int irq)
+{
+	unsigned int port;
+
+	port = 0x4d0 + (irq >> 3);
+	return (inb(port) >> (irq & 7)) & 1;
+}
+
+static void __init construct_default_ioirq_mptable(int mpc_default_type)
+{
+	struct mpc_config_intsrc intsrc;
+	int i;
+	int ELCR_fallback = 0;
+
+	intsrc.mpc_type = MP_INTSRC;
+	intsrc.mpc_irqflag = 0;			/* conforming */
+	intsrc.mpc_srcbus = 0;
+	intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
+
+	intsrc.mpc_irqtype = mp_INT;
+
+	/*
+	 *  If true, we have an ISA/PCI system with no IRQ entries
+	 *  in the MP table. To prevent the PCI interrupts from being set up
+	 *  incorrectly, we try to use the ELCR. The sanity check to see if
+	 *  there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
+	 *  never be level sensitive, so we simply see if the ELCR agrees.
+	 *  If it does, we assume it's valid.
+	 */
+	if (mpc_default_type == 5) {
+		printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
+
+		if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
+			printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n");
+		else {
+			printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
+			ELCR_fallback = 1;
+		}
+	}
+
+	for (i = 0; i < 16; i++) {
+		switch (mpc_default_type) {
+		case 2:
+			if (i == 0 || i == 13)
+				continue;	/* IRQ0 & IRQ13 not connected */
+			/* fall through */
+		default:
+			if (i == 2)
+				continue;	/* IRQ2 is never connected */
+		}
+
+		if (ELCR_fallback) {
+			/*
+			 *  If the ELCR indicates a level-sensitive interrupt, we
+			 *  copy that information over to the MP table in the
+			 *  irqflag field (level sensitive, active high polarity).
+			 */
+			if (ELCR_trigger(i))
+				intsrc.mpc_irqflag = 13;
+			else
+				intsrc.mpc_irqflag = 0;
+		}
+
+		intsrc.mpc_srcbusirq = i;
+		intsrc.mpc_dstirq = i ? i : 2;		/* IRQ0 to INTIN2 */
+		MP_intsrc_info(&intsrc);
+	}
+
+	intsrc.mpc_irqtype = mp_ExtINT;
+	intsrc.mpc_srcbusirq = 0;
+	intsrc.mpc_dstirq = 0;				/* 8259A to INTIN0 */
+	MP_intsrc_info(&intsrc);
+}
+
+static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+{
+	struct mpc_config_processor processor;
+	struct mpc_config_bus bus;
+	struct mpc_config_ioapic ioapic;
+	struct mpc_config_lintsrc lintsrc;
+	int linttypes[2] = { mp_ExtINT, mp_NMI };
+	int i;
+
+	/*
+	 * local APIC has default address
+	 */
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	/*
+	 * 2 CPUs, numbered 0 & 1.
+	 */
+	processor.mpc_type = MP_PROCESSOR;
+	/* Either an integrated APIC or a discrete 82489DX. */
+	processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+	processor.mpc_cpuflag = CPU_ENABLED;
+	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
+				   (boot_cpu_data.x86_model << 4) |
+				   boot_cpu_data.x86_mask;
+	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+	processor.mpc_reserved[0] = 0;
+	processor.mpc_reserved[1] = 0;
+	for (i = 0; i < 2; i++) {
+		processor.mpc_apicid = i;
+		MP_processor_info(&processor);
+	}
+
+	bus.mpc_type = MP_BUS;
+	bus.mpc_busid = 0;
+	switch (mpc_default_type) {
+		default:
+			printk("???\n");
+			printk(KERN_ERR "Unknown standard configuration %d\n",
+				mpc_default_type);
+			/* fall through */
+		case 1:
+		case 5:
+			memcpy(bus.mpc_bustype, "ISA   ", 6);
+			break;
+		case 2:
+		case 6:
+		case 3:
+			memcpy(bus.mpc_bustype, "EISA  ", 6);
+			break;
+		case 4:
+		case 7:
+			memcpy(bus.mpc_bustype, "MCA   ", 6);
+	}
+	MP_bus_info(&bus);
+	if (mpc_default_type > 4) {
+		bus.mpc_busid = 1;
+		memcpy(bus.mpc_bustype, "PCI   ", 6);
+		MP_bus_info(&bus);
+	}
+
+	ioapic.mpc_type = MP_IOAPIC;
+	ioapic.mpc_apicid = 2;
+	ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+	ioapic.mpc_flags = MPC_APIC_USABLE;
+	ioapic.mpc_apicaddr = 0xFEC00000;
+	MP_ioapic_info(&ioapic);
+
+	/*
+	 * We set up most of the low 16 IO-APIC pins according to MPS rules.
+	 */
+	construct_default_ioirq_mptable(mpc_default_type);
+
+	lintsrc.mpc_type = MP_LINTSRC;
+	lintsrc.mpc_irqflag = 0;		/* conforming */
+	lintsrc.mpc_srcbusid = 0;
+	lintsrc.mpc_srcbusirq = 0;
+	lintsrc.mpc_destapic = MP_APIC_ALL;
+	for (i = 0; i < 2; i++) {
+		lintsrc.mpc_irqtype = linttypes[i];
+		lintsrc.mpc_destapiclint = i;
+		MP_lintsrc_info(&lintsrc);
+	}
+}
+
+static struct intel_mp_floating *mpf_found;
+
+/*
+ * Scan the memory blocks for an SMP configuration block.
+ */
+void __init get_smp_config (void)
+{
+	struct intel_mp_floating *mpf = mpf_found;
+
+	/*
+	 * ACPI may be used to obtain the entire SMP configuration or just to 
+	 * enumerate/configure processors (CONFIG_ACPI_BOOT).  Note that 
+	 * ACPI supports both logical (e.g. Hyper-Threading) and physical 
+	 * processors, where MPS only supports physical.
+	 */
+	if (acpi_lapic && acpi_ioapic) {
+		printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
+		return;
+	}
+	else if (acpi_lapic)
+		printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
+
+	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
+	if (mpf->mpf_feature2 & (1<<7)) {
+		printk(KERN_INFO "    IMCR and PIC compatibility mode.\n");
+		pic_mode = 1;
+	} else {
+		printk(KERN_INFO "    Virtual Wire compatibility mode.\n");
+		pic_mode = 0;
+	}
+
+	/*
+	 * Now see if we need to read further.
+	 */
+	if (mpf->mpf_feature1 != 0) {
+
+		printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
+		construct_default_ISA_mptable(mpf->mpf_feature1);
+
+	} else if (mpf->mpf_physptr) {
+
+		/*
+		 * Read the physical hardware table.  Anything here will
+		 * override the defaults.
+		 */
+		if (!smp_read_mpc((void *)mpf->mpf_physptr)) {
+			smp_found_config = 0;
+			printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
+			printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
+			return;
+		}
+		/*
+		 * If there are no explicit MP IRQ entries, then we are
+		 * broken.  We set up most of the low 16 IO-APIC pins to
+		 * ISA defaults and hope it will work.
+		 */
+		if (!mp_irq_entries) {
+			struct mpc_config_bus bus;
+
+			printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
+
+			bus.mpc_type = MP_BUS;
+			bus.mpc_busid = 0;
+			memcpy(bus.mpc_bustype, "ISA   ", 6);
+			MP_bus_info(&bus);
+
+			construct_default_ioirq_mptable(0);
+		}
+
+	} else
+		BUG();
+
+	printk(KERN_INFO "Processors: %d\n", num_processors);
+	/*
+	 * Only use the first configuration found.
+	 */
+}
+
+static int __init smp_scan_config (unsigned long base, unsigned long length)
+{
+	unsigned long *bp = phys_to_virt(base);
+	struct intel_mp_floating *mpf;
+
+	Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
+	if (sizeof(*mpf) != 16)
+		printk("Error: MPF size\n");
+
+	while (length > 0) {
+		mpf = (struct intel_mp_floating *)bp;
+		if ((*bp == SMP_MAGIC_IDENT) &&
+			(mpf->mpf_length == 1) &&
+			!mpf_checksum((unsigned char *)bp, 16) &&
+			((mpf->mpf_specification == 1)
+				|| (mpf->mpf_specification == 4)) ) {
+
+			smp_found_config = 1;
+			printk(KERN_INFO "found SMP MP-table at %08lx\n",
+						virt_to_phys(mpf));
+			reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE);
+			if (mpf->mpf_physptr) {
+				/*
+				 * We cannot access to MPC table to compute
+				 * table size yet, as only few megabytes from
+				 * the bottom is mapped now.
+				 * PC-9800's MPC table places on the very last
+				 * of physical memory; so that simply reserving
+				 * PAGE_SIZE from mpg->mpf_physptr yields BUG()
+				 * in reserve_bootmem.
+				 */
+				unsigned long size = PAGE_SIZE;
+				unsigned long end = max_low_pfn * PAGE_SIZE;
+				if (mpf->mpf_physptr + size > end)
+					size = end - mpf->mpf_physptr;
+				reserve_bootmem(mpf->mpf_physptr, size);
+			}
+
+			mpf_found = mpf;
+			return 1;
+		}
+		bp += 4;
+		length -= 16;
+	}
+	return 0;
+}
+
+void __init find_smp_config (void)
+{
+	unsigned int address;
+
+	/*
+	 * FIXME: Linux assumes you have 640K of base ram..
+	 * this continues the error...
+	 *
+	 * 1) Scan the bottom 1K for a signature
+	 * 2) Scan the top 1K of base RAM
+	 * 3) Scan the 64K of bios
+	 */
+	if (smp_scan_config(0x0,0x400) ||
+		smp_scan_config(639*0x400,0x400) ||
+			smp_scan_config(0xF0000,0x10000))
+		return;
+	/*
+	 * If it is an SMP machine we should know now, unless the
+	 * configuration is in an EISA/MCA bus machine with an
+	 * extended bios data area.
+	 *
+	 * there is a real-mode segmented pointer pointing to the
+	 * 4K EBDA area at 0x40E, calculate and scan it here.
+	 *
+	 * NOTE! There are Linux loaders that will corrupt the EBDA
+	 * area, and as such this kind of SMP config may be less
+	 * trustworthy, simply because the SMP table may have been
+	 * stomped on during early boot. These loaders are buggy and
+	 * should be fixed.
+	 *
+	 * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
+	 */
+
+	address = get_bios_ebda();
+	if (address)
+		smp_scan_config(address, 0x400);
+}
+
+/* --------------------------------------------------------------------------
+                            ACPI-based MP Configuration
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_BOOT
+
+void __init mp_register_lapic_address (
+	u64			address)
+{
+	mp_lapic_addr = (unsigned long) address;
+
+	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
+
+	if (boot_cpu_physical_apicid == -1U)
+		boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+
+	Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
+}
+
+
+void __init mp_register_lapic (
+	u8			id, 
+	u8			enabled)
+{
+	struct mpc_config_processor processor;
+	int			boot_cpu = 0;
+	
+	if (MAX_APICS - id <= 0) {
+		printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
+			id, MAX_APICS);
+		return;
+	}
+
+	if (id == boot_cpu_physical_apicid)
+		boot_cpu = 1;
+
+	processor.mpc_type = MP_PROCESSOR;
+	processor.mpc_apicid = id;
+	processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
+	processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
+	processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
+	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | 
+		(boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+	processor.mpc_reserved[0] = 0;
+	processor.mpc_reserved[1] = 0;
+
+	MP_processor_info(&processor);
+}
+
+#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT))
+
+#define MP_ISA_BUS		0
+#define MP_MAX_IOAPIC_PIN	127
+
+static struct mp_ioapic_routing {
+	int			apic_id;
+	int			gsi_base;
+	int			gsi_end;
+	u32			pin_programmed[4];
+} mp_ioapic_routing[MAX_IO_APICS];
+
+
+static int mp_find_ioapic (
+	int			gsi)
+{
+	int			i = 0;
+
+	/* Find the IOAPIC that manages this GSI. */
+	for (i = 0; i < nr_ioapics; i++) {
+		if ((gsi >= mp_ioapic_routing[i].gsi_base)
+			&& (gsi <= mp_ioapic_routing[i].gsi_end))
+			return i;
+	}
+
+	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+
+	return -1;
+}
+	
+
+void __init mp_register_ioapic (
+	u8			id, 
+	u32			address,
+	u32			gsi_base)
+{
+	int			idx = 0;
+
+	if (nr_ioapics >= MAX_IO_APICS) {
+		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+			"(found %d)\n", MAX_IO_APICS, nr_ioapics);
+		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+	}
+	if (!address) {
+		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+			" found in MADT table, skipping!\n");
+		return;
+	}
+
+	idx = nr_ioapics++;
+
+	mp_ioapics[idx].mpc_type = MP_IOAPIC;
+	mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
+	mp_ioapics[idx].mpc_apicaddr = address;
+
+	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+	mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
+	
+	/* 
+	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+	 */
+	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
+	mp_ioapic_routing[idx].gsi_base = gsi_base;
+	mp_ioapic_routing[idx].gsi_end = gsi_base + 
+		io_apic_get_redir_entries(idx);
+
+	printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
+		"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, 
+		mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
+		mp_ioapic_routing[idx].gsi_base,
+		mp_ioapic_routing[idx].gsi_end);
+
+	return;
+}
+
+
+void __init mp_override_legacy_irq (
+	u8			bus_irq,
+	u8			polarity, 
+	u8			trigger, 
+	u32			gsi)
+{
+	struct mpc_config_intsrc intsrc;
+	int			ioapic = -1;
+	int			pin = -1;
+
+	/* 
+	 * Convert 'gsi' to 'ioapic.pin'.
+	 */
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0)
+		return;
+	pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+	/*
+	 * TBD: This check is for faulty timer entries, where the override
+	 *      erroneously sets the trigger to level, resulting in a HUGE 
+	 *      increase of timer interrupts!
+	 */
+	if ((bus_irq == 0) && (trigger == 3))
+		trigger = 1;
+
+	intsrc.mpc_type = MP_INTSRC;
+	intsrc.mpc_irqtype = mp_INT;
+	intsrc.mpc_irqflag = (trigger << 2) | polarity;
+	intsrc.mpc_srcbus = MP_ISA_BUS;
+	intsrc.mpc_srcbusirq = bus_irq;				       /* IRQ */
+	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;	   /* APIC ID */
+	intsrc.mpc_dstirq = pin;				    /* INTIN# */
+
+	Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
+		intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, 
+		(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
+		intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
+
+	mp_irqs[mp_irq_entries] = intsrc;
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!\n");
+
+	return;
+}
+
+int es7000_plat;
+
+void __init mp_config_acpi_legacy_irqs (void)
+{
+	struct mpc_config_intsrc intsrc;
+	int			i = 0;
+	int			ioapic = -1;
+
+	/* 
+	 * Fabricate the legacy ISA bus (bus #31).
+	 */
+	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+
+	/*
+	 * Older generations of ES7000 have no legacy identity mappings
+	 */
+	if (es7000_plat == 1)
+		return;
+
+	/* 
+	 * Locate the IOAPIC that manages the ISA IRQs (0-15). 
+	 */
+	ioapic = mp_find_ioapic(0);
+	if (ioapic < 0)
+		return;
+
+	intsrc.mpc_type = MP_INTSRC;
+	intsrc.mpc_irqflag = 0;					/* Conforming */
+	intsrc.mpc_srcbus = MP_ISA_BUS;
+	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
+
+	/* 
+	 * Use the default configuration for the IRQs 0-15.  Unless
+	 * overriden by (MADT) interrupt source override entries.
+	 */
+	for (i = 0; i < 16; i++) {
+		int idx;
+
+		for (idx = 0; idx < mp_irq_entries; idx++) {
+			struct mpc_config_intsrc *irq = mp_irqs + idx;
+
+			/* Do we already have a mapping for this ISA IRQ? */
+			if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
+				break;
+
+			/* Do we already have a mapping for this IOAPIC pin */
+			if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
+				(irq->mpc_dstirq == i))
+				break;
+		}
+
+		if (idx != mp_irq_entries) {
+			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+			continue;			/* IRQ already used */
+		}
+
+		intsrc.mpc_irqtype = mp_INT;
+		intsrc.mpc_srcbusirq = i;		   /* Identity mapped */
+		intsrc.mpc_dstirq = i;
+
+		Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
+			"%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, 
+			(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
+			intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, 
+			intsrc.mpc_dstirq);
+
+		mp_irqs[mp_irq_entries] = intsrc;
+		if (++mp_irq_entries == MAX_IRQ_SOURCES)
+			panic("Max # of irq sources exceeded!\n");
+	}
+}
+
+int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
+{
+	int			ioapic = -1;
+	int			ioapic_pin = 0;
+	int			idx, bit = 0;
+
+#ifdef CONFIG_ACPI_BUS
+	/* Don't set up the ACPI SCI because it's already set up */
+	if (acpi_fadt.sci_int == gsi)
+		return gsi;
+#endif
+
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0) {
+		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+		return gsi;
+	}
+
+	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+	if (ioapic_renumber_irq)
+		gsi = ioapic_renumber_irq(ioapic, gsi);
+
+	/* 
+	 * Avoid pin reprogramming.  PRTs typically include entries  
+	 * with redundant pin->gsi mappings (but unique PCI devices);
+	 * we only program the IOAPIC on the first.
+	 */
+	bit = ioapic_pin % 32;
+	idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
+	if (idx > 3) {
+		printk(KERN_ERR "Invalid reference to IOAPIC pin "
+			"%d-%d\n", mp_ioapic_routing[ioapic].apic_id, 
+			ioapic_pin);
+		return gsi;
+	}
+	if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
+		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
+			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+		return gsi;
+	}
+
+	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
+
+	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
+		    edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
+		    active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
+	return gsi;
+}
+
+#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/
+#endif /*CONFIG_ACPI_BOOT*/
diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c
new file mode 100644
index 000000000000..05d9f8f363a6
--- /dev/null
+++ b/arch/i386/kernel/msr.c
@@ -0,0 +1,346 @@
+/* ----------------------------------------------------------------------- *
+ *   
+ *   Copyright 2000 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
+ *   USA; either version 2 of the License, or (at your option) any later
+ *   version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * msr.c
+ *
+ * x86 MSR access device
+ *
+ * This device is accessed by lseek() to the appropriate register number
+ * and then read/write in chunks of 8 bytes.  A larger size means multiple
+ * reads or writes of the same register.
+ *
+ * This driver uses /dev/cpu/%d/msr where %d is the minor number, and on
+ * an SMP box will direct the access to CPU %d.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+static struct class_simple *msr_class;
+
+/* Note: "err" is handled in a funny way below.  Otherwise one version
+   of gcc or another breaks. */
+
+static inline int wrmsr_eio(u32 reg, u32 eax, u32 edx)
+{
+	int err;
+
+	asm volatile ("1:	wrmsr\n"
+		      "2:\n"
+		      ".section .fixup,\"ax\"\n"
+		      "3:	movl %4,%0\n"
+		      "	jmp 2b\n"
+		      ".previous\n"
+		      ".section __ex_table,\"a\"\n"
+		      "	.align 4\n" "	.long 1b,3b\n" ".previous":"=&bDS" (err)
+		      :"a"(eax), "d"(edx), "c"(reg), "i"(-EIO), "0"(0));
+
+	return err;
+}
+
+static inline int rdmsr_eio(u32 reg, u32 *eax, u32 *edx)
+{
+	int err;
+
+	asm volatile ("1:	rdmsr\n"
+		      "2:\n"
+		      ".section .fixup,\"ax\"\n"
+		      "3:	movl %4,%0\n"
+		      "	jmp 2b\n"
+		      ".previous\n"
+		      ".section __ex_table,\"a\"\n"
+		      "	.align 4\n"
+		      "	.long 1b,3b\n"
+		      ".previous":"=&bDS" (err), "=a"(*eax), "=d"(*edx)
+		      :"c"(reg), "i"(-EIO), "0"(0));
+
+	return err;
+}
+
+#ifdef CONFIG_SMP
+
+struct msr_command {
+	int cpu;
+	int err;
+	u32 reg;
+	u32 data[2];
+};
+
+static void msr_smp_wrmsr(void *cmd_block)
+{
+	struct msr_command *cmd = (struct msr_command *)cmd_block;
+
+	if (cmd->cpu == smp_processor_id())
+		cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]);
+}
+
+static void msr_smp_rdmsr(void *cmd_block)
+{
+	struct msr_command *cmd = (struct msr_command *)cmd_block;
+
+	if (cmd->cpu == smp_processor_id())
+		cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]);
+}
+
+static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx)
+{
+	struct msr_command cmd;
+	int ret;
+
+	preempt_disable();
+	if (cpu == smp_processor_id()) {
+		ret = wrmsr_eio(reg, eax, edx);
+	} else {
+		cmd.cpu = cpu;
+		cmd.reg = reg;
+		cmd.data[0] = eax;
+		cmd.data[1] = edx;
+
+		smp_call_function(msr_smp_wrmsr, &cmd, 1, 1);
+		ret = cmd.err;
+	}
+	preempt_enable();
+	return ret;
+}
+
+static inline int do_rdmsr(int cpu, u32 reg, u32 * eax, u32 * edx)
+{
+	struct msr_command cmd;
+	int ret;
+
+	preempt_disable();
+	if (cpu == smp_processor_id()) {
+		ret = rdmsr_eio(reg, eax, edx);
+	} else {
+		cmd.cpu = cpu;
+		cmd.reg = reg;
+
+		smp_call_function(msr_smp_rdmsr, &cmd, 1, 1);
+
+		*eax = cmd.data[0];
+		*edx = cmd.data[1];
+
+		ret = cmd.err;
+	}
+	preempt_enable();
+	return ret;
+}
+
+#else				/* ! CONFIG_SMP */
+
+static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx)
+{
+	return wrmsr_eio(reg, eax, edx);
+}
+
+static inline int do_rdmsr(int cpu, u32 reg, u32 *eax, u32 *edx)
+{
+	return rdmsr_eio(reg, eax, edx);
+}
+
+#endif				/* ! CONFIG_SMP */
+
+static loff_t msr_seek(struct file *file, loff_t offset, int orig)
+{
+	loff_t ret = -EINVAL;
+
+	lock_kernel();
+	switch (orig) {
+	case 0:
+		file->f_pos = offset;
+		ret = file->f_pos;
+		break;
+	case 1:
+		file->f_pos += offset;
+		ret = file->f_pos;
+	}
+	unlock_kernel();
+	return ret;
+}
+
+static ssize_t msr_read(struct file *file, char __user * buf,
+			size_t count, loff_t * ppos)
+{
+	u32 __user *tmp = (u32 __user *) buf;
+	u32 data[2];
+	size_t rv;
+	u32 reg = *ppos;
+	int cpu = iminor(file->f_dentry->d_inode);
+	int err;
+
+	if (count % 8)
+		return -EINVAL;	/* Invalid chunk size */
+
+	for (rv = 0; count; count -= 8) {
+		err = do_rdmsr(cpu, reg, &data[0], &data[1]);
+		if (err)
+			return err;
+		if (copy_to_user(tmp, &data, 8))
+			return -EFAULT;
+		tmp += 2;
+	}
+
+	return ((char __user *)tmp) - buf;
+}
+
+static ssize_t msr_write(struct file *file, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	const u32 __user *tmp = (const u32 __user *)buf;
+	u32 data[2];
+	size_t rv;
+	u32 reg = *ppos;
+	int cpu = iminor(file->f_dentry->d_inode);
+	int err;
+
+	if (count % 8)
+		return -EINVAL;	/* Invalid chunk size */
+
+	for (rv = 0; count; count -= 8) {
+		if (copy_from_user(&data, tmp, 8))
+			return -EFAULT;
+		err = do_wrmsr(cpu, reg, data[0], data[1]);
+		if (err)
+			return err;
+		tmp += 2;
+	}
+
+	return ((char __user *)tmp) - buf;
+}
+
+static int msr_open(struct inode *inode, struct file *file)
+{
+	unsigned int cpu = iminor(file->f_dentry->d_inode);
+	struct cpuinfo_x86 *c = &(cpu_data)[cpu];
+
+	if (cpu >= NR_CPUS || !cpu_online(cpu))
+		return -ENXIO;	/* No such CPU */
+	if (!cpu_has(c, X86_FEATURE_MSR))
+		return -EIO;	/* MSR not supported */
+
+	return 0;
+}
+
+/*
+ * File operations we support
+ */
+static struct file_operations msr_fops = {
+	.owner = THIS_MODULE,
+	.llseek = msr_seek,
+	.read = msr_read,
+	.write = msr_write,
+	.open = msr_open,
+};
+
+static int msr_class_simple_device_add(int i)
+{
+	int err = 0;
+	struct class_device *class_err;
+
+	class_err = class_simple_device_add(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
+	if (IS_ERR(class_err)) 
+		err = PTR_ERR(class_err);
+	return err;
+}
+
+static int __devinit msr_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+		msr_class_simple_device_add(cpu);
+		break;
+	case CPU_DEAD:
+		class_simple_device_remove(MKDEV(MSR_MAJOR, cpu));	
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block msr_class_cpu_notifier =
+{
+	.notifier_call = msr_class_cpu_callback,
+};
+
+static int __init msr_init(void)
+{
+	int i, err = 0;
+	i = 0;
+
+	if (register_chrdev(MSR_MAJOR, "cpu/msr", &msr_fops)) {
+		printk(KERN_ERR "msr: unable to get major %d for msr\n",
+		       MSR_MAJOR);
+		err = -EBUSY;
+		goto out;
+	}
+	msr_class = class_simple_create(THIS_MODULE, "msr");
+	if (IS_ERR(msr_class)) {
+		err = PTR_ERR(msr_class);
+		goto out_chrdev;
+	}
+	for_each_online_cpu(i) {
+		err = msr_class_simple_device_add(i);
+		if (err != 0)
+			goto out_class;
+	}
+	register_cpu_notifier(&msr_class_cpu_notifier);
+
+	err = 0;
+	goto out;
+
+out_class:
+	i = 0;
+	for_each_online_cpu(i)
+		class_simple_device_remove(MKDEV(MSR_MAJOR, i));
+	class_simple_destroy(msr_class);
+out_chrdev:
+	unregister_chrdev(MSR_MAJOR, "cpu/msr");
+out:
+	return err;
+}
+
+static void __exit msr_exit(void)
+{
+	int cpu = 0;
+	for_each_online_cpu(cpu)
+		class_simple_device_remove(MKDEV(MSR_MAJOR, cpu));
+	class_simple_destroy(msr_class);
+	unregister_chrdev(MSR_MAJOR, "cpu/msr");
+	unregister_cpu_notifier(&msr_class_cpu_notifier);
+}
+
+module_init(msr_init);
+module_exit(msr_exit)
+
+MODULE_AUTHOR("H. Peter Anvin <hpa@zytor.com>");
+MODULE_DESCRIPTION("x86 generic MSR driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
new file mode 100644
index 000000000000..f5b0c5081bd6
--- /dev/null
+++ b/arch/i386/kernel/nmi.c
@@ -0,0 +1,570 @@
+/*
+ *  linux/arch/i386/nmi.c
+ *
+ *  NMI watchdog support on APIC systems
+ *
+ *  Started by Ingo Molnar <mingo@redhat.com>
+ *
+ *  Fixes:
+ *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
+ *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
+ *  Mikael Pettersson	: Pentium 4 support for local APIC NMI watchdog.
+ *  Pavel Machek and
+ *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/nmi.h>
+#include <linux/sysdev.h>
+#include <linux/sysctl.h>
+
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/nmi.h>
+
+#include "mach_traps.h"
+
+unsigned int nmi_watchdog = NMI_NONE;
+extern int unknown_nmi_panic;
+static unsigned int nmi_hz = HZ;
+static unsigned int nmi_perfctr_msr;	/* the MSR to reset in NMI handler */
+static unsigned int nmi_p4_cccr_val;
+extern void show_registers(struct pt_regs *regs);
+
+/*
+ * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
+ * - it may be reserved by some other driver, or not
+ * - when not reserved by some other driver, it may be used for
+ *   the NMI watchdog, or not
+ *
+ * This is maintained separately from nmi_active because the NMI
+ * watchdog may also be driven from the I/O APIC timer.
+ */
+static DEFINE_SPINLOCK(lapic_nmi_owner_lock);
+static unsigned int lapic_nmi_owner;
+#define LAPIC_NMI_WATCHDOG	(1<<0)
+#define LAPIC_NMI_RESERVED	(1<<1)
+
+/* nmi_active:
+ * +1: the lapic NMI watchdog is active, but can be disabled
+ *  0: the lapic NMI watchdog has not been set up, and cannot
+ *     be enabled
+ * -1: the lapic NMI watchdog is disabled, but can be enabled
+ */
+int nmi_active;
+
+#define K7_EVNTSEL_ENABLE	(1 << 22)
+#define K7_EVNTSEL_INT		(1 << 20)
+#define K7_EVNTSEL_OS		(1 << 17)
+#define K7_EVNTSEL_USR		(1 << 16)
+#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING	0x76
+#define K7_NMI_EVENT		K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
+
+#define P6_EVNTSEL0_ENABLE	(1 << 22)
+#define P6_EVNTSEL_INT		(1 << 20)
+#define P6_EVNTSEL_OS		(1 << 17)
+#define P6_EVNTSEL_USR		(1 << 16)
+#define P6_EVENT_CPU_CLOCKS_NOT_HALTED	0x79
+#define P6_NMI_EVENT		P6_EVENT_CPU_CLOCKS_NOT_HALTED
+
+#define MSR_P4_MISC_ENABLE	0x1A0
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL	(1<<7)
+#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL	(1<<12)
+#define MSR_P4_PERFCTR0		0x300
+#define MSR_P4_CCCR0		0x360
+#define P4_ESCR_EVENT_SELECT(N)	((N)<<25)
+#define P4_ESCR_OS		(1<<3)
+#define P4_ESCR_USR		(1<<2)
+#define P4_CCCR_OVF_PMI0	(1<<26)
+#define P4_CCCR_OVF_PMI1	(1<<27)
+#define P4_CCCR_THRESHOLD(N)	((N)<<20)
+#define P4_CCCR_COMPLEMENT	(1<<19)
+#define P4_CCCR_COMPARE		(1<<18)
+#define P4_CCCR_REQUIRED	(3<<16)
+#define P4_CCCR_ESCR_SELECT(N)	((N)<<13)
+#define P4_CCCR_ENABLE		(1<<12)
+/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+   CRU_ESCR0 (with any non-null event selector) through a complemented
+   max threshold. [IA32-Vol3, Section 14.9.9] */
+#define MSR_P4_IQ_COUNTER0	0x30C
+#define P4_NMI_CRU_ESCR0	(P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
+#define P4_NMI_IQ_CCCR0	\
+	(P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT|	\
+	 P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
+
+int __init check_nmi_watchdog (void)
+{
+	unsigned int prev_nmi_count[NR_CPUS];
+	int cpu;
+
+	printk(KERN_INFO "testing NMI watchdog ... ");
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++)
+		prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
+	local_irq_enable();
+	mdelay((10*1000)/nmi_hz); // wait 10 ticks
+
+	/* FIXME: Only boot CPU is online at this stage.  Check CPUs
+           as they come up. */
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+#ifdef CONFIG_SMP
+		/* Check cpu_callin_map here because that is set
+		   after the timer is started. */
+		if (!cpu_isset(cpu, cpu_callin_map))
+			continue;
+#endif
+		if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
+			printk("CPU#%d: NMI appears to be stuck!\n", cpu);
+			nmi_active = 0;
+			lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+			return -1;
+		}
+	}
+	printk("OK.\n");
+
+	/* now that we know it works we can reduce NMI frequency to
+	   something more reasonable; makes a difference in some configs */
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		nmi_hz = 1;
+
+	return 0;
+}
+
+static int __init setup_nmi_watchdog(char *str)
+{
+	int nmi;
+
+	get_option(&str, &nmi);
+
+	if (nmi >= NMI_INVALID)
+		return 0;
+	if (nmi == NMI_NONE)
+		nmi_watchdog = nmi;
+	/*
+	 * If any other x86 CPU has a local APIC, then
+	 * please test the NMI stuff there and send me the
+	 * missing bits. Right now Intel P6/P4 and AMD K7 only.
+	 */
+	if ((nmi == NMI_LOCAL_APIC) &&
+			(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+			(boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
+		nmi_watchdog = nmi;
+	if ((nmi == NMI_LOCAL_APIC) &&
+			(boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
+	  		(boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
+		nmi_watchdog = nmi;
+	/*
+	 * We can enable the IO-APIC watchdog
+	 * unconditionally.
+	 */
+	if (nmi == NMI_IO_APIC) {
+		nmi_active = 1;
+		nmi_watchdog = nmi;
+	}
+	return 1;
+}
+
+__setup("nmi_watchdog=", setup_nmi_watchdog);
+
+static void disable_lapic_nmi_watchdog(void)
+{
+	if (nmi_active <= 0)
+		return;
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+		wrmsr(MSR_K7_EVNTSEL0, 0, 0);
+		break;
+	case X86_VENDOR_INTEL:
+		switch (boot_cpu_data.x86) {
+		case 6:
+			if (boot_cpu_data.x86_model > 0xd)
+				break;
+
+			wrmsr(MSR_P6_EVNTSEL0, 0, 0);
+			break;
+		case 15:
+			if (boot_cpu_data.x86_model > 0x3)
+				break;
+
+			wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
+			wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
+			break;
+		}
+		break;
+	}
+	nmi_active = -1;
+	/* tell do_nmi() and others that we're not active any more */
+	nmi_watchdog = 0;
+}
+
+static void enable_lapic_nmi_watchdog(void)
+{
+	if (nmi_active < 0) {
+		nmi_watchdog = NMI_LOCAL_APIC;
+		setup_apic_nmi_watchdog();
+	}
+}
+
+int reserve_lapic_nmi(void)
+{
+	unsigned int old_owner;
+
+	spin_lock(&lapic_nmi_owner_lock);
+	old_owner = lapic_nmi_owner;
+	lapic_nmi_owner |= LAPIC_NMI_RESERVED;
+	spin_unlock(&lapic_nmi_owner_lock);
+	if (old_owner & LAPIC_NMI_RESERVED)
+		return -EBUSY;
+	if (old_owner & LAPIC_NMI_WATCHDOG)
+		disable_lapic_nmi_watchdog();
+	return 0;
+}
+
+void release_lapic_nmi(void)
+{
+	unsigned int new_owner;
+
+	spin_lock(&lapic_nmi_owner_lock);
+	new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
+	lapic_nmi_owner = new_owner;
+	spin_unlock(&lapic_nmi_owner_lock);
+	if (new_owner & LAPIC_NMI_WATCHDOG)
+		enable_lapic_nmi_watchdog();
+}
+
+void disable_timer_nmi_watchdog(void)
+{
+	if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0))
+		return;
+
+	unset_nmi_callback();
+	nmi_active = -1;
+	nmi_watchdog = NMI_NONE;
+}
+
+void enable_timer_nmi_watchdog(void)
+{
+	if (nmi_active < 0) {
+		nmi_watchdog = NMI_IO_APIC;
+		touch_nmi_watchdog();
+		nmi_active = 1;
+	}
+}
+
+#ifdef CONFIG_PM
+
+static int nmi_pm_active; /* nmi_active before suspend */
+
+static int lapic_nmi_suspend(struct sys_device *dev, u32 state)
+{
+	nmi_pm_active = nmi_active;
+	disable_lapic_nmi_watchdog();
+	return 0;
+}
+
+static int lapic_nmi_resume(struct sys_device *dev)
+{
+	if (nmi_pm_active > 0)
+		enable_lapic_nmi_watchdog();
+	return 0;
+}
+
+
+static struct sysdev_class nmi_sysclass = {
+	set_kset_name("lapic_nmi"),
+	.resume		= lapic_nmi_resume,
+	.suspend	= lapic_nmi_suspend,
+};
+
+static struct sys_device device_lapic_nmi = {
+	.id	= 0,
+	.cls	= &nmi_sysclass,
+};
+
+static int __init init_lapic_nmi_sysfs(void)
+{
+	int error;
+
+	if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC)
+		return 0;
+
+	error = sysdev_class_register(&nmi_sysclass);
+	if (!error)
+		error = sysdev_register(&device_lapic_nmi);
+	return error;
+}
+/* must come after the local APIC's device_initcall() */
+late_initcall(init_lapic_nmi_sysfs);
+
+#endif	/* CONFIG_PM */
+
+/*
+ * Activate the NMI watchdog via the local APIC.
+ * Original code written by Keith Owens.
+ */
+
+static void clear_msr_range(unsigned int base, unsigned int n)
+{
+	unsigned int i;
+
+	for(i = 0; i < n; ++i)
+		wrmsr(base+i, 0, 0);
+}
+
+static void setup_k7_watchdog(void)
+{
+	unsigned int evntsel;
+
+	nmi_perfctr_msr = MSR_K7_PERFCTR0;
+
+	clear_msr_range(MSR_K7_EVNTSEL0, 4);
+	clear_msr_range(MSR_K7_PERFCTR0, 4);
+
+	evntsel = K7_EVNTSEL_INT
+		| K7_EVNTSEL_OS
+		| K7_EVNTSEL_USR
+		| K7_NMI_EVENT;
+
+	wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
+	Dprintk("setting K7_PERFCTR0 to %08lx\n", -(cpu_khz/nmi_hz*1000));
+	wrmsr(MSR_K7_PERFCTR0, -(cpu_khz/nmi_hz*1000), -1);
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+	evntsel |= K7_EVNTSEL_ENABLE;
+	wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
+}
+
+static void setup_p6_watchdog(void)
+{
+	unsigned int evntsel;
+
+	nmi_perfctr_msr = MSR_P6_PERFCTR0;
+
+	clear_msr_range(MSR_P6_EVNTSEL0, 2);
+	clear_msr_range(MSR_P6_PERFCTR0, 2);
+
+	evntsel = P6_EVNTSEL_INT
+		| P6_EVNTSEL_OS
+		| P6_EVNTSEL_USR
+		| P6_NMI_EVENT;
+
+	wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
+	Dprintk("setting P6_PERFCTR0 to %08lx\n", -(cpu_khz/nmi_hz*1000));
+	wrmsr(MSR_P6_PERFCTR0, -(cpu_khz/nmi_hz*1000), 0);
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+	evntsel |= P6_EVNTSEL0_ENABLE;
+	wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
+}
+
+static int setup_p4_watchdog(void)
+{
+	unsigned int misc_enable, dummy;
+
+	rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
+	if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
+		return 0;
+
+	nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
+	nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
+#ifdef CONFIG_SMP
+	if (smp_num_siblings == 2)
+		nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
+#endif
+
+	if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
+		clear_msr_range(0x3F1, 2);
+	/* MSR 0x3F0 seems to have a default value of 0xFC00, but current
+	   docs doesn't fully define it, so leave it alone for now. */
+	if (boot_cpu_data.x86_model >= 0x3) {
+		/* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
+		clear_msr_range(0x3A0, 26);
+		clear_msr_range(0x3BC, 3);
+	} else {
+		clear_msr_range(0x3A0, 31);
+	}
+	clear_msr_range(0x3C0, 6);
+	clear_msr_range(0x3C8, 6);
+	clear_msr_range(0x3E0, 2);
+	clear_msr_range(MSR_P4_CCCR0, 18);
+	clear_msr_range(MSR_P4_PERFCTR0, 18);
+
+	wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
+	wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
+	Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz/nmi_hz*1000));
+	wrmsr(MSR_P4_IQ_COUNTER0, -(cpu_khz/nmi_hz*1000), -1);
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+	wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+	return 1;
+}
+
+void setup_apic_nmi_watchdog (void)
+{
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+		if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15)
+			return;
+		setup_k7_watchdog();
+		break;
+	case X86_VENDOR_INTEL:
+		switch (boot_cpu_data.x86) {
+		case 6:
+			if (boot_cpu_data.x86_model > 0xd)
+				return;
+
+			setup_p6_watchdog();
+			break;
+		case 15:
+			if (boot_cpu_data.x86_model > 0x3)
+				return;
+
+			if (!setup_p4_watchdog())
+				return;
+			break;
+		default:
+			return;
+		}
+		break;
+	default:
+		return;
+	}
+	lapic_nmi_owner = LAPIC_NMI_WATCHDOG;
+	nmi_active = 1;
+}
+
+/*
+ * the best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check it's local APIC timer IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs don't listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up
+ *  here too!]
+ */
+
+static unsigned int
+	last_irq_sums [NR_CPUS],
+	alert_counter [NR_CPUS];
+
+void touch_nmi_watchdog (void)
+{
+	int i;
+
+	/*
+	 * Just reset the alert counters, (other CPUs might be
+	 * spinning on locks we hold):
+	 */
+	for (i = 0; i < NR_CPUS; i++)
+		alert_counter[i] = 0;
+}
+
+extern void die_nmi(struct pt_regs *, const char *msg);
+
+void nmi_watchdog_tick (struct pt_regs * regs)
+{
+
+	/*
+	 * Since current_thread_info()-> is always on the stack, and we
+	 * always switch the stack NMI-atomically, it's safe to use
+	 * smp_processor_id().
+	 */
+	int sum, cpu = smp_processor_id();
+
+	sum = per_cpu(irq_stat, cpu).apic_timer_irqs;
+
+	if (last_irq_sums[cpu] == sum) {
+		/*
+		 * Ayiee, looks like this CPU is stuck ...
+		 * wait a few IRQs (5 seconds) before doing the oops ...
+		 */
+		alert_counter[cpu]++;
+		if (alert_counter[cpu] == 5*nmi_hz)
+			die_nmi(regs, "NMI Watchdog detected LOCKUP");
+	} else {
+		last_irq_sums[cpu] = sum;
+		alert_counter[cpu] = 0;
+	}
+	if (nmi_perfctr_msr) {
+		if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
+			/*
+			 * P4 quirks:
+			 * - An overflown perfctr will assert its interrupt
+			 *   until the OVF flag in its CCCR is cleared.
+			 * - LVTPC is masked on interrupt and must be
+			 *   unmasked by the LVTPC handler.
+			 */
+			wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
+			apic_write(APIC_LVTPC, APIC_DM_NMI);
+		}
+		else if (nmi_perfctr_msr == MSR_P6_PERFCTR0) {
+			/* Only P6 based Pentium M need to re-unmask
+			 * the apic vector but it doesn't hurt
+			 * other P6 variant */
+			apic_write(APIC_LVTPC, APIC_DM_NMI);
+		}
+		wrmsr(nmi_perfctr_msr, -(cpu_khz/nmi_hz*1000), -1);
+	}
+}
+
+#ifdef CONFIG_SYSCTL
+
+static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
+{
+	unsigned char reason = get_nmi_reason();
+	char buf[64];
+
+	if (!(reason & 0xc0)) {
+		sprintf(buf, "NMI received for unknown reason %02x\n", reason);
+		die_nmi(regs, buf);
+	}
+	return 0;
+}
+
+/*
+ * proc handler for /proc/sys/kernel/unknown_nmi_panic
+ */
+int proc_unknown_nmi_panic(ctl_table *table, int write, struct file *file,
+			void __user *buffer, size_t *length, loff_t *ppos)
+{
+	int old_state;
+
+	old_state = unknown_nmi_panic;
+	proc_dointvec(table, write, file, buffer, length, ppos);
+	if (!!old_state == !!unknown_nmi_panic)
+		return 0;
+
+	if (unknown_nmi_panic) {
+		if (reserve_lapic_nmi() < 0) {
+			unknown_nmi_panic = 0;
+			return -EBUSY;
+		} else {
+			set_nmi_callback(unknown_nmi_panic_callback);
+		}
+	} else {
+		release_lapic_nmi();
+		unset_nmi_callback();
+	}
+	return 0;
+}
+
+#endif
+
+EXPORT_SYMBOL(nmi_active);
+EXPORT_SYMBOL(nmi_watchdog);
+EXPORT_SYMBOL(reserve_lapic_nmi);
+EXPORT_SYMBOL(release_lapic_nmi);
+EXPORT_SYMBOL(disable_timer_nmi_watchdog);
+EXPORT_SYMBOL(enable_timer_nmi_watchdog);
diff --git a/arch/i386/kernel/numaq.c b/arch/i386/kernel/numaq.c
new file mode 100644
index 000000000000..e51edf0a6564
--- /dev/null
+++ b/arch/i386/kernel/numaq.c
@@ -0,0 +1,79 @@
+/*
+ * Written by: Patricia Gaughen, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.          
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gone@us.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/nodemask.h>
+#include <asm/numaq.h>
+#include <asm/topology.h>
+
+#define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
+
+/*
+ * Function: smp_dump_qct()
+ *
+ * Description: gets memory layout from the quad config table.  This
+ * function also updates node_online_map with the nodes (quads) present.
+ */
+static void __init smp_dump_qct(void)
+{
+	int node;
+	struct eachquadmem *eq;
+	struct sys_cfg_data *scd =
+		(struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR);
+
+	nodes_clear(node_online_map);
+	for_each_node(node) {
+		if (scd->quads_present31_0 & (1 << node)) {
+			node_set_online(node);
+			eq = &scd->eq[node];
+			/* Convert to pages */
+			node_start_pfn[node] = MB_TO_PAGES(
+				eq->hi_shrd_mem_start - eq->priv_mem_size);
+			node_end_pfn[node] = MB_TO_PAGES(
+				eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
+
+			memory_present(node,
+				node_start_pfn[node], node_end_pfn[node]);
+			node_remap_size[node] = node_memmap_size_bytes(node,
+							node_start_pfn[node],
+							node_end_pfn[node]);
+		}
+	}
+}
+
+/*
+ * Unlike Summit, we don't really care to let the NUMA-Q
+ * fall back to flat mode.  Don't compile for NUMA-Q
+ * unless you really need it!
+ */
+int __init get_memcfg_numaq(void)
+{
+	smp_dump_qct();
+	return 1;
+}
diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c
new file mode 100644
index 000000000000..4de2e03c7b45
--- /dev/null
+++ b/arch/i386/kernel/pci-dma.c
@@ -0,0 +1,147 @@
+/*
+ * Dynamic DMA mapping support.
+ *
+ * On i386 there is no hardware dynamic DMA address translation,
+ * so consistent alloc/free are merely page allocation/freeing.
+ * The rest of the dynamic DMA mapping interface is implemented
+ * in asm/pci.h.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+struct dma_coherent_mem {
+	void		*virt_base;
+	u32		device_base;
+	int		size;
+	int		flags;
+	unsigned long	*bitmap;
+};
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+{
+	void *ret;
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+	int order = get_order(size);
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+	if (mem) {
+		int page = bitmap_find_free_region(mem->bitmap, mem->size,
+						     order);
+		if (page >= 0) {
+			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
+			ret = mem->virt_base + (page << PAGE_SHIFT);
+			memset(ret, 0, size);
+			return ret;
+		}
+		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
+			return NULL;
+	}
+
+	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
+		gfp |= GFP_DMA;
+
+	ret = (void *)__get_free_pages(gfp, order);
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_phys(ret);
+	}
+	return ret;
+}
+
+void dma_free_coherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle)
+{
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+	int order = get_order(size);
+	
+	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
+
+		bitmap_release_region(mem->bitmap, page, order);
+	} else
+		free_pages((unsigned long)vaddr, order);
+}
+
+int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+				dma_addr_t device_addr, size_t size, int flags)
+{
+	void __iomem *mem_base;
+	int pages = size >> PAGE_SHIFT;
+	int bitmap_size = (pages + 31)/32;
+
+	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
+		goto out;
+	if (!size)
+		goto out;
+	if (dev->dma_mem)
+		goto out;
+
+	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
+
+	mem_base = ioremap(bus_addr, size);
+	if (!mem_base)
+		goto out;
+
+	dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
+	if (!dev->dma_mem)
+		goto out;
+	memset(dev->dma_mem, 0, sizeof(struct dma_coherent_mem));
+	dev->dma_mem->bitmap = kmalloc(bitmap_size, GFP_KERNEL);
+	if (!dev->dma_mem->bitmap)
+		goto free1_out;
+	memset(dev->dma_mem->bitmap, 0, bitmap_size);
+
+	dev->dma_mem->virt_base = mem_base;
+	dev->dma_mem->device_base = device_addr;
+	dev->dma_mem->size = pages;
+	dev->dma_mem->flags = flags;
+
+	if (flags & DMA_MEMORY_MAP)
+		return DMA_MEMORY_MAP;
+
+	return DMA_MEMORY_IO;
+
+ free1_out:
+	kfree(dev->dma_mem->bitmap);
+ out:
+	return 0;
+}
+EXPORT_SYMBOL(dma_declare_coherent_memory);
+
+void dma_release_declared_memory(struct device *dev)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+	
+	if(!mem)
+		return;
+	dev->dma_mem = NULL;
+	iounmap(mem->virt_base);
+	kfree(mem->bitmap);
+	kfree(mem);
+}
+EXPORT_SYMBOL(dma_release_declared_memory);
+
+void *dma_mark_declared_memory_occupied(struct device *dev,
+					dma_addr_t device_addr, size_t size)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	int pos, err;
+
+	if (!mem)
+		return ERR_PTR(-EINVAL);
+
+	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
+	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
+	if (err != 0)
+		return ERR_PTR(err);
+	return mem->virt_base + (pos << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
new file mode 100644
index 000000000000..c36fedf40e95
--- /dev/null
+++ b/arch/i386/kernel/process.c
@@ -0,0 +1,848 @@
+/*
+ *  linux/arch/i386/kernel/process.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *
+ *  Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <stdarg.h>
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/elfcore.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/config.h>
+#include <linux/utsname.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/ptrace.h>
+#include <linux/random.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/ldt.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/irq.h>
+#include <asm/desc.h>
+#ifdef CONFIG_MATH_EMULATION
+#include <asm/math_emu.h>
+#endif
+
+#include <linux/irq.h>
+#include <linux/err.h>
+
+asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
+
+static int hlt_counter;
+
+unsigned long boot_option_idle_override = 0;
+EXPORT_SYMBOL(boot_option_idle_override);
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+	return ((unsigned long *)tsk->thread.esp)[3];
+}
+
+/*
+ * Powermanagement idle function, if any..
+ */
+void (*pm_idle)(void);
+static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
+
+void disable_hlt(void)
+{
+	hlt_counter++;
+}
+
+EXPORT_SYMBOL(disable_hlt);
+
+void enable_hlt(void)
+{
+	hlt_counter--;
+}
+
+EXPORT_SYMBOL(enable_hlt);
+
+/*
+ * We use this if we don't have any better
+ * idle routine..
+ */
+void default_idle(void)
+{
+	if (!hlt_counter && boot_cpu_data.hlt_works_ok) {
+		local_irq_disable();
+		if (!need_resched())
+			safe_halt();
+		else
+			local_irq_enable();
+	} else {
+		cpu_relax();
+	}
+}
+
+/*
+ * On SMP it's slightly faster (but much more power-consuming!)
+ * to poll the ->work.need_resched flag instead of waiting for the
+ * cross-CPU IPI to arrive. Use this option with caution.
+ */
+static void poll_idle (void)
+{
+	int oldval;
+
+	local_irq_enable();
+
+	/*
+	 * Deal with another CPU just having chosen a thread to
+	 * run here:
+	 */
+	oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
+
+	if (!oldval) {
+		set_thread_flag(TIF_POLLING_NRFLAG);
+		asm volatile(
+			"2:"
+			"testl %0, %1;"
+			"rep; nop;"
+			"je 2b;"
+			: : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags));
+
+		clear_thread_flag(TIF_POLLING_NRFLAG);
+	} else {
+		set_need_resched();
+	}
+}
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle (void)
+{
+	/* endless idle loop with no priority at all */
+	while (1) {
+		while (!need_resched()) {
+			void (*idle)(void);
+
+			if (__get_cpu_var(cpu_idle_state))
+				__get_cpu_var(cpu_idle_state) = 0;
+
+			rmb();
+			idle = pm_idle;
+
+			if (!idle)
+				idle = default_idle;
+
+			__get_cpu_var(irq_stat).idle_timestamp = jiffies;
+			idle();
+		}
+		schedule();
+	}
+}
+
+void cpu_idle_wait(void)
+{
+	unsigned int cpu, this_cpu = get_cpu();
+	cpumask_t map;
+
+	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
+	put_cpu();
+
+	cpus_clear(map);
+	for_each_online_cpu(cpu) {
+		per_cpu(cpu_idle_state, cpu) = 1;
+		cpu_set(cpu, map);
+	}
+
+	__get_cpu_var(cpu_idle_state) = 0;
+
+	wmb();
+	do {
+		ssleep(1);
+		for_each_online_cpu(cpu) {
+			if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
+				cpu_clear(cpu, map);
+		}
+		cpus_and(map, map, cpu_online_map);
+	} while (!cpus_empty(map));
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
+
+/*
+ * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
+ * which can obviate IPI to trigger checking of need_resched.
+ * We execute MONITOR against need_resched and enter optimized wait state
+ * through MWAIT. Whenever someone changes need_resched, we would be woken
+ * up from MWAIT (without an IPI).
+ */
+static void mwait_idle(void)
+{
+	local_irq_enable();
+
+	if (!need_resched()) {
+		set_thread_flag(TIF_POLLING_NRFLAG);
+		do {
+			__monitor((void *)&current_thread_info()->flags, 0, 0);
+			if (need_resched())
+				break;
+			__mwait(0, 0);
+		} while (!need_resched());
+		clear_thread_flag(TIF_POLLING_NRFLAG);
+	}
+}
+
+void __init select_idle_routine(const struct cpuinfo_x86 *c)
+{
+	if (cpu_has(c, X86_FEATURE_MWAIT)) {
+		printk("monitor/mwait feature present.\n");
+		/*
+		 * Skip, if setup has overridden idle.
+		 * One CPU supports mwait => All CPUs supports mwait
+		 */
+		if (!pm_idle) {
+			printk("using mwait in idle threads.\n");
+			pm_idle = mwait_idle;
+		}
+	}
+}
+
+static int __init idle_setup (char *str)
+{
+	if (!strncmp(str, "poll", 4)) {
+		printk("using polling idle threads.\n");
+		pm_idle = poll_idle;
+#ifdef CONFIG_X86_SMP
+		if (smp_num_siblings > 1)
+			printk("WARNING: polling idle and HT enabled, performance may degrade.\n");
+#endif
+	} else if (!strncmp(str, "halt", 4)) {
+		printk("using halt in idle threads.\n");
+		pm_idle = default_idle;
+	}
+
+	boot_option_idle_override = 1;
+	return 1;
+}
+
+__setup("idle=", idle_setup);
+
+void show_regs(struct pt_regs * regs)
+{
+	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
+
+	printk("\n");
+	printk("Pid: %d, comm: %20s\n", current->pid, current->comm);
+	printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip, smp_processor_id());
+	print_symbol("EIP is at %s\n", regs->eip);
+
+	if (regs->xcs & 3)
+		printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp);
+	printk(" EFLAGS: %08lx    %s  (%s)\n",
+	       regs->eflags, print_tainted(), system_utsname.release);
+	printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+		regs->eax,regs->ebx,regs->ecx,regs->edx);
+	printk("ESI: %08lx EDI: %08lx EBP: %08lx",
+		regs->esi, regs->edi, regs->ebp);
+	printk(" DS: %04x ES: %04x\n",
+		0xffff & regs->xds,0xffff & regs->xes);
+
+	__asm__("movl %%cr0, %0": "=r" (cr0));
+	__asm__("movl %%cr2, %0": "=r" (cr2));
+	__asm__("movl %%cr3, %0": "=r" (cr3));
+	/* This could fault if %cr4 does not exist */
+	__asm__("1: movl %%cr4, %0		\n"
+		"2:				\n"
+		".section __ex_table,\"a\"	\n"
+		".long 1b,2b			\n"
+		".previous			\n"
+		: "=r" (cr4): "0" (0));
+	printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4);
+	show_trace(NULL, &regs->esp);
+}
+
+/*
+ * This gets run with %ebx containing the
+ * function to call, and %edx containing
+ * the "args".
+ */
+extern void kernel_thread_helper(void);
+__asm__(".section .text\n"
+	".align 4\n"
+	"kernel_thread_helper:\n\t"
+	"movl %edx,%eax\n\t"
+	"pushl %edx\n\t"
+	"call *%ebx\n\t"
+	"pushl %eax\n\t"
+	"call do_exit\n"
+	".previous");
+
+/*
+ * Create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+
+	regs.ebx = (unsigned long) fn;
+	regs.edx = (unsigned long) arg;
+
+	regs.xds = __USER_DS;
+	regs.xes = __USER_DS;
+	regs.orig_eax = -1;
+	regs.eip = (unsigned long) kernel_thread_helper;
+	regs.xcs = __KERNEL_CS;
+	regs.eflags = X86_EFLAGS_IF | X86_EFLAGS_SF | X86_EFLAGS_PF | 0x2;
+
+	/* Ok, create the new process.. */
+	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+	struct task_struct *tsk = current;
+	struct thread_struct *t = &tsk->thread;
+
+	/* The process may have allocated an io port bitmap... nuke it. */
+	if (unlikely(NULL != t->io_bitmap_ptr)) {
+		int cpu = get_cpu();
+		struct tss_struct *tss = &per_cpu(init_tss, cpu);
+
+		kfree(t->io_bitmap_ptr);
+		t->io_bitmap_ptr = NULL;
+		/*
+		 * Careful, clear this in the TSS too:
+		 */
+		memset(tss->io_bitmap, 0xff, tss->io_bitmap_max);
+		t->io_bitmap_max = 0;
+		tss->io_bitmap_owner = NULL;
+		tss->io_bitmap_max = 0;
+		tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
+		put_cpu();
+	}
+}
+
+void flush_thread(void)
+{
+	struct task_struct *tsk = current;
+
+	memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8);
+	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));	
+	/*
+	 * Forget coprocessor state..
+	 */
+	clear_fpu(tsk);
+	clear_used_math();
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+	if (dead_task->mm) {
+		// temporary debugging check
+		if (dead_task->mm->context.size) {
+			printk("WARNING: dead process %8s still has LDT? <%p/%d>\n",
+					dead_task->comm,
+					dead_task->mm->context.ldt,
+					dead_task->mm->context.size);
+			BUG();
+		}
+	}
+
+	release_vm86_irqs(dead_task);
+}
+
+/*
+ * This gets called before we allocate a new thread and copy
+ * the current task into it.
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+	unlazy_fpu(tsk);
+}
+
+int copy_thread(int nr, unsigned long clone_flags, unsigned long esp,
+	unsigned long unused,
+	struct task_struct * p, struct pt_regs * regs)
+{
+	struct pt_regs * childregs;
+	struct task_struct *tsk;
+	int err;
+
+	childregs = ((struct pt_regs *) (THREAD_SIZE + (unsigned long) p->thread_info)) - 1;
+	*childregs = *regs;
+	childregs->eax = 0;
+	childregs->esp = esp;
+
+	p->thread.esp = (unsigned long) childregs;
+	p->thread.esp0 = (unsigned long) (childregs+1);
+
+	p->thread.eip = (unsigned long) ret_from_fork;
+
+	savesegment(fs,p->thread.fs);
+	savesegment(gs,p->thread.gs);
+
+	tsk = current;
+	if (unlikely(NULL != tsk->thread.io_bitmap_ptr)) {
+		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
+		if (!p->thread.io_bitmap_ptr) {
+			p->thread.io_bitmap_max = 0;
+			return -ENOMEM;
+		}
+		memcpy(p->thread.io_bitmap_ptr, tsk->thread.io_bitmap_ptr,
+			IO_BITMAP_BYTES);
+	}
+
+	/*
+	 * Set a new TLS for the child thread?
+	 */
+	if (clone_flags & CLONE_SETTLS) {
+		struct desc_struct *desc;
+		struct user_desc info;
+		int idx;
+
+		err = -EFAULT;
+		if (copy_from_user(&info, (void __user *)childregs->esi, sizeof(info)))
+			goto out;
+		err = -EINVAL;
+		if (LDT_empty(&info))
+			goto out;
+
+		idx = info.entry_number;
+		if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+			goto out;
+
+		desc = p->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+		desc->a = LDT_entry_a(&info);
+		desc->b = LDT_entry_b(&info);
+	}
+
+	err = 0;
+ out:
+	if (err && p->thread.io_bitmap_ptr) {
+		kfree(p->thread.io_bitmap_ptr);
+		p->thread.io_bitmap_max = 0;
+	}
+	return err;
+}
+
+/*
+ * fill in the user structure for a core dump..
+ */
+void dump_thread(struct pt_regs * regs, struct user * dump)
+{
+	int i;
+
+/* changed the size calculations - should hopefully work better. lbt */
+	dump->magic = CMAGIC;
+	dump->start_code = 0;
+	dump->start_stack = regs->esp & ~(PAGE_SIZE - 1);
+	dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
+	dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
+	dump->u_dsize -= dump->u_tsize;
+	dump->u_ssize = 0;
+	for (i = 0; i < 8; i++)
+		dump->u_debugreg[i] = current->thread.debugreg[i];  
+
+	if (dump->start_stack < TASK_SIZE)
+		dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
+
+	dump->regs.ebx = regs->ebx;
+	dump->regs.ecx = regs->ecx;
+	dump->regs.edx = regs->edx;
+	dump->regs.esi = regs->esi;
+	dump->regs.edi = regs->edi;
+	dump->regs.ebp = regs->ebp;
+	dump->regs.eax = regs->eax;
+	dump->regs.ds = regs->xds;
+	dump->regs.es = regs->xes;
+	savesegment(fs,dump->regs.fs);
+	savesegment(gs,dump->regs.gs);
+	dump->regs.orig_eax = regs->orig_eax;
+	dump->regs.eip = regs->eip;
+	dump->regs.cs = regs->xcs;
+	dump->regs.eflags = regs->eflags;
+	dump->regs.esp = regs->esp;
+	dump->regs.ss = regs->xss;
+
+	dump->u_fpvalid = dump_fpu (regs, &dump->i387);
+}
+
+/* 
+ * Capture the user space registers if the task is not running (in user space)
+ */
+int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
+{
+	struct pt_regs ptregs;
+	
+	ptregs = *(struct pt_regs *)
+		((unsigned long)tsk->thread_info+THREAD_SIZE - sizeof(ptregs));
+	ptregs.xcs &= 0xffff;
+	ptregs.xds &= 0xffff;
+	ptregs.xes &= 0xffff;
+	ptregs.xss &= 0xffff;
+
+	elf_core_copy_regs(regs, &ptregs);
+
+	return 1;
+}
+
+static inline void
+handle_io_bitmap(struct thread_struct *next, struct tss_struct *tss)
+{
+	if (!next->io_bitmap_ptr) {
+		/*
+		 * Disable the bitmap via an invalid offset. We still cache
+		 * the previous bitmap owner and the IO bitmap contents:
+		 */
+		tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
+		return;
+	}
+	if (likely(next == tss->io_bitmap_owner)) {
+		/*
+		 * Previous owner of the bitmap (hence the bitmap content)
+		 * matches the next task, we dont have to do anything but
+		 * to set a valid offset in the TSS:
+		 */
+		tss->io_bitmap_base = IO_BITMAP_OFFSET;
+		return;
+	}
+	/*
+	 * Lazy TSS's I/O bitmap copy. We set an invalid offset here
+	 * and we let the task to get a GPF in case an I/O instruction
+	 * is performed.  The handler of the GPF will verify that the
+	 * faulting task has a valid I/O bitmap and, it true, does the
+	 * real copy and restart the instruction.  This will save us
+	 * redundant copies when the currently switched task does not
+	 * perform any I/O during its timeslice.
+	 */
+	tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
+}
+/*
+ * This special macro can be used to load a debugging register
+ */
+#define loaddebug(thread,register) \
+		__asm__("movl %0,%%db" #register  \
+			: /* no output */ \
+			:"r" (thread->debugreg[register]))
+
+/*
+ *	switch_to(x,yn) should switch tasks from x to y.
+ *
+ * We fsave/fwait so that an exception goes off at the right time
+ * (as a call from the fsave or fwait in effect) rather than to
+ * the wrong process. Lazy FP saving no longer makes any sense
+ * with modern CPU's, and this simplifies a lot of things (SMP
+ * and UP become the same).
+ *
+ * NOTE! We used to use the x86 hardware context switching. The
+ * reason for not using it any more becomes apparent when you
+ * try to recover gracefully from saved state that is no longer
+ * valid (stale segment register values in particular). With the
+ * hardware task-switch, there is no way to fix up bad state in
+ * a reasonable manner.
+ *
+ * The fact that Intel documents the hardware task-switching to
+ * be slow is a fairly red herring - this code is not noticeably
+ * faster. However, there _is_ some room for improvement here,
+ * so the performance issues may eventually be a valid point.
+ * More important, however, is the fact that this allows us much
+ * more flexibility.
+ *
+ * The return value (in %eax) will be the "prev" task after
+ * the task-switch, and shows up in ret_from_fork in entry.S,
+ * for example.
+ */
+struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
+{
+	struct thread_struct *prev = &prev_p->thread,
+				 *next = &next_p->thread;
+	int cpu = smp_processor_id();
+	struct tss_struct *tss = &per_cpu(init_tss, cpu);
+
+	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
+
+	__unlazy_fpu(prev_p);
+
+	/*
+	 * Reload esp0, LDT and the page table pointer:
+	 */
+	load_esp0(tss, next);
+
+	/*
+	 * Load the per-thread Thread-Local Storage descriptor.
+	 */
+	load_TLS(next, cpu);
+
+	/*
+	 * Save away %fs and %gs. No need to save %es and %ds, as
+	 * those are always kernel segments while inside the kernel.
+	 */
+	asm volatile("movl %%fs,%0":"=m" (*(int *)&prev->fs));
+	asm volatile("movl %%gs,%0":"=m" (*(int *)&prev->gs));
+
+	/*
+	 * Restore %fs and %gs if needed.
+	 */
+	if (unlikely(prev->fs | prev->gs | next->fs | next->gs)) {
+		loadsegment(fs, next->fs);
+		loadsegment(gs, next->gs);
+	}
+
+	/*
+	 * Now maybe reload the debug registers
+	 */
+	if (unlikely(next->debugreg[7])) {
+		loaddebug(next, 0);
+		loaddebug(next, 1);
+		loaddebug(next, 2);
+		loaddebug(next, 3);
+		/* no 4 and 5 */
+		loaddebug(next, 6);
+		loaddebug(next, 7);
+	}
+
+	if (unlikely(prev->io_bitmap_ptr || next->io_bitmap_ptr))
+		handle_io_bitmap(next, tss);
+
+	return prev_p;
+}
+
+asmlinkage int sys_fork(struct pt_regs regs)
+{
+	return do_fork(SIGCHLD, regs.esp, &regs, 0, NULL, NULL);
+}
+
+asmlinkage int sys_clone(struct pt_regs regs)
+{
+	unsigned long clone_flags;
+	unsigned long newsp;
+	int __user *parent_tidptr, *child_tidptr;
+
+	clone_flags = regs.ebx;
+	newsp = regs.ecx;
+	parent_tidptr = (int __user *)regs.edx;
+	child_tidptr = (int __user *)regs.edi;
+	if (!newsp)
+		newsp = regs.esp;
+	return do_fork(clone_flags, newsp, &regs, 0, parent_tidptr, child_tidptr);
+}
+
+/*
+ * This is trivial, and on the face of it looks like it
+ * could equally well be done in user mode.
+ *
+ * Not so, for quite unobvious reasons - register pressure.
+ * In user mode vfork() cannot have a stack frame, and if
+ * done by calling the "clone()" system call directly, you
+ * do not have enough call-clobbered registers to hold all
+ * the information you need.
+ */
+asmlinkage int sys_vfork(struct pt_regs regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.esp, &regs, 0, NULL, NULL);
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+asmlinkage int sys_execve(struct pt_regs regs)
+{
+	int error;
+	char * filename;
+
+	filename = getname((char __user *) regs.ebx);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		goto out;
+	error = do_execve(filename,
+			(char __user * __user *) regs.ecx,
+			(char __user * __user *) regs.edx,
+			&regs);
+	if (error == 0) {
+		task_lock(current);
+		current->ptrace &= ~PT_DTRACE;
+		task_unlock(current);
+		/* Make sure we don't return using sysenter.. */
+		set_thread_flag(TIF_IRET);
+	}
+	putname(filename);
+out:
+	return error;
+}
+
+#define top_esp                (THREAD_SIZE - sizeof(unsigned long))
+#define top_ebp                (THREAD_SIZE - 2*sizeof(unsigned long))
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long ebp, esp, eip;
+	unsigned long stack_page;
+	int count = 0;
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+	stack_page = (unsigned long)p->thread_info;
+	esp = p->thread.esp;
+	if (!stack_page || esp < stack_page || esp > top_esp+stack_page)
+		return 0;
+	/* include/asm-i386/system.h:switch_to() pushes ebp last. */
+	ebp = *(unsigned long *) esp;
+	do {
+		if (ebp < stack_page || ebp > top_ebp+stack_page)
+			return 0;
+		eip = *(unsigned long *) (ebp+4);
+		if (!in_sched_functions(eip))
+			return eip;
+		ebp = *(unsigned long *) ebp;
+	} while (count++ < 16);
+	return 0;
+}
+
+/*
+ * sys_alloc_thread_area: get a yet unused TLS descriptor index.
+ */
+static int get_free_idx(void)
+{
+	struct thread_struct *t = &current->thread;
+	int idx;
+
+	for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
+		if (desc_empty(t->tls_array + idx))
+			return idx + GDT_ENTRY_TLS_MIN;
+	return -ESRCH;
+}
+
+/*
+ * Set a given TLS descriptor:
+ */
+asmlinkage int sys_set_thread_area(struct user_desc __user *u_info)
+{
+	struct thread_struct *t = &current->thread;
+	struct user_desc info;
+	struct desc_struct *desc;
+	int cpu, idx;
+
+	if (copy_from_user(&info, u_info, sizeof(info)))
+		return -EFAULT;
+	idx = info.entry_number;
+
+	/*
+	 * index -1 means the kernel should try to find and
+	 * allocate an empty descriptor:
+	 */
+	if (idx == -1) {
+		idx = get_free_idx();
+		if (idx < 0)
+			return idx;
+		if (put_user(idx, &u_info->entry_number))
+			return -EFAULT;
+	}
+
+	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+		return -EINVAL;
+
+	desc = t->tls_array + idx - GDT_ENTRY_TLS_MIN;
+
+	/*
+	 * We must not get preempted while modifying the TLS.
+	 */
+	cpu = get_cpu();
+
+	if (LDT_empty(&info)) {
+		desc->a = 0;
+		desc->b = 0;
+	} else {
+		desc->a = LDT_entry_a(&info);
+		desc->b = LDT_entry_b(&info);
+	}
+	load_TLS(t, cpu);
+
+	put_cpu();
+
+	return 0;
+}
+
+/*
+ * Get the current Thread-Local Storage area:
+ */
+
+#define GET_BASE(desc) ( \
+	(((desc)->a >> 16) & 0x0000ffff) | \
+	(((desc)->b << 16) & 0x00ff0000) | \
+	( (desc)->b        & 0xff000000)   )
+
+#define GET_LIMIT(desc) ( \
+	((desc)->a & 0x0ffff) | \
+	 ((desc)->b & 0xf0000) )
+	
+#define GET_32BIT(desc)		(((desc)->b >> 22) & 1)
+#define GET_CONTENTS(desc)	(((desc)->b >> 10) & 3)
+#define GET_WRITABLE(desc)	(((desc)->b >>  9) & 1)
+#define GET_LIMIT_PAGES(desc)	(((desc)->b >> 23) & 1)
+#define GET_PRESENT(desc)	(((desc)->b >> 15) & 1)
+#define GET_USEABLE(desc)	(((desc)->b >> 20) & 1)
+
+asmlinkage int sys_get_thread_area(struct user_desc __user *u_info)
+{
+	struct user_desc info;
+	struct desc_struct *desc;
+	int idx;
+
+	if (get_user(idx, &u_info->entry_number))
+		return -EFAULT;
+	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+		return -EINVAL;
+
+	desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+
+	info.entry_number = idx;
+	info.base_addr = GET_BASE(desc);
+	info.limit = GET_LIMIT(desc);
+	info.seg_32bit = GET_32BIT(desc);
+	info.contents = GET_CONTENTS(desc);
+	info.read_exec_only = !GET_WRITABLE(desc);
+	info.limit_in_pages = GET_LIMIT_PAGES(desc);
+	info.seg_not_present = !GET_PRESENT(desc);
+	info.useable = GET_USEABLE(desc);
+
+	if (copy_to_user(u_info, &info, sizeof(info)))
+		return -EFAULT;
+	return 0;
+}
+
+unsigned long arch_align_stack(unsigned long sp)
+{
+	if (randomize_va_space)
+		sp -= get_random_int() % 8192;
+	return sp & ~0xf;
+}
diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c
new file mode 100644
index 000000000000..b2f17640ceff
--- /dev/null
+++ b/arch/i386/kernel/ptrace.c
@@ -0,0 +1,717 @@
+/* ptrace.c */
+/* By Ross Biro 1/23/92 */
+/*
+ * Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/security.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/debugreg.h>
+#include <asm/ldt.h>
+#include <asm/desc.h>
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/* determines which flags the user has access to. */
+/* 1 = access 0 = no access */
+#define FLAG_MASK 0x00044dd5
+
+/* set's the trap flag. */
+#define TRAP_FLAG 0x100
+
+/*
+ * Offset of eflags on child stack..
+ */
+#define EFL_OFFSET ((EFL-2)*4-sizeof(struct pt_regs))
+
+static inline struct pt_regs *get_child_regs(struct task_struct *task)
+{
+	void *stack_top = (void *)task->thread.esp0;
+	return stack_top - sizeof(struct pt_regs);
+}
+
+/*
+ * this routine will get a word off of the processes privileged stack. 
+ * the offset is how far from the base addr as stored in the TSS.  
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */   
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+	unsigned char *stack;
+
+	stack = (unsigned char *)task->thread.esp0;
+	stack += offset;
+	return (*((int *)stack));
+}
+
+/*
+ * this routine will put a word on the processes privileged stack. 
+ * the offset is how far from the base addr as stored in the TSS.  
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline int put_stack_long(struct task_struct *task, int offset,
+	unsigned long data)
+{
+	unsigned char * stack;
+
+	stack = (unsigned char *) task->thread.esp0;
+	stack += offset;
+	*(unsigned long *) stack = data;
+	return 0;
+}
+
+static int putreg(struct task_struct *child,
+	unsigned long regno, unsigned long value)
+{
+	switch (regno >> 2) {
+		case FS:
+			if (value && (value & 3) != 3)
+				return -EIO;
+			child->thread.fs = value;
+			return 0;
+		case GS:
+			if (value && (value & 3) != 3)
+				return -EIO;
+			child->thread.gs = value;
+			return 0;
+		case DS:
+		case ES:
+			if (value && (value & 3) != 3)
+				return -EIO;
+			value &= 0xffff;
+			break;
+		case SS:
+		case CS:
+			if ((value & 3) != 3)
+				return -EIO;
+			value &= 0xffff;
+			break;
+		case EFL:
+			value &= FLAG_MASK;
+			value |= get_stack_long(child, EFL_OFFSET) & ~FLAG_MASK;
+			break;
+	}
+	if (regno > GS*4)
+		regno -= 2*4;
+	put_stack_long(child, regno - sizeof(struct pt_regs), value);
+	return 0;
+}
+
+static unsigned long getreg(struct task_struct *child,
+	unsigned long regno)
+{
+	unsigned long retval = ~0UL;
+
+	switch (regno >> 2) {
+		case FS:
+			retval = child->thread.fs;
+			break;
+		case GS:
+			retval = child->thread.gs;
+			break;
+		case DS:
+		case ES:
+		case SS:
+		case CS:
+			retval = 0xffff;
+			/* fall through */
+		default:
+			if (regno > GS*4)
+				regno -= 2*4;
+			regno = regno - sizeof(struct pt_regs);
+			retval &= get_stack_long(child, regno);
+	}
+	return retval;
+}
+
+#define LDT_SEGMENT 4
+
+static unsigned long convert_eip_to_linear(struct task_struct *child, struct pt_regs *regs)
+{
+	unsigned long addr, seg;
+
+	addr = regs->eip;
+	seg = regs->xcs & 0xffff;
+	if (regs->eflags & VM_MASK) {
+		addr = (addr & 0xffff) + (seg << 4);
+		return addr;
+	}
+
+	/*
+	 * We'll assume that the code segments in the GDT
+	 * are all zero-based. That is largely true: the
+	 * TLS segments are used for data, and the PNPBIOS
+	 * and APM bios ones we just ignore here.
+	 */
+	if (seg & LDT_SEGMENT) {
+		u32 *desc;
+		unsigned long base;
+
+		down(&child->mm->context.sem);
+		desc = child->mm->context.ldt + (seg & ~7);
+		base = (desc[0] >> 16) | ((desc[1] & 0xff) << 16) | (desc[1] & 0xff000000);
+
+		/* 16-bit code segment? */
+		if (!((desc[1] >> 22) & 1))
+			addr &= 0xffff;
+		addr += base;
+		up(&child->mm->context.sem);
+	}
+	return addr;
+}
+
+static inline int is_at_popf(struct task_struct *child, struct pt_regs *regs)
+{
+	int i, copied;
+	unsigned char opcode[16];
+	unsigned long addr = convert_eip_to_linear(child, regs);
+
+	copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0);
+	for (i = 0; i < copied; i++) {
+		switch (opcode[i]) {
+		/* popf */
+		case 0x9d:
+			return 1;
+		/* opcode and address size prefixes */
+		case 0x66: case 0x67:
+			continue;
+		/* irrelevant prefixes (segment overrides and repeats) */
+		case 0x26: case 0x2e:
+		case 0x36: case 0x3e:
+		case 0x64: case 0x65:
+		case 0xf0: case 0xf2: case 0xf3:
+			continue;
+
+		/*
+		 * pushf: NOTE! We should probably not let
+		 * the user see the TF bit being set. But
+		 * it's more pain than it's worth to avoid
+		 * it, and a debugger could emulate this
+		 * all in user space if it _really_ cares.
+		 */
+		case 0x9c:
+		default:
+			return 0;
+		}
+	}
+	return 0;
+}
+
+static void set_singlestep(struct task_struct *child)
+{
+	struct pt_regs *regs = get_child_regs(child);
+
+	/*
+	 * Always set TIF_SINGLESTEP - this guarantees that 
+	 * we single-step system calls etc..  This will also
+	 * cause us to set TF when returning to user mode.
+	 */
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+	/*
+	 * If TF was already set, don't do anything else
+	 */
+	if (regs->eflags & TRAP_FLAG)
+		return;
+
+	/* Set TF on the kernel stack.. */
+	regs->eflags |= TRAP_FLAG;
+
+	/*
+	 * ..but if TF is changed by the instruction we will trace,
+	 * don't mark it as being "us" that set it, so that we
+	 * won't clear it by hand later.
+	 */
+	if (is_at_popf(child, regs))
+		return;
+	
+	child->ptrace |= PT_DTRACE;
+}
+
+static void clear_singlestep(struct task_struct *child)
+{
+	/* Always clear TIF_SINGLESTEP... */
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+	/* But touch TF only if it was set by us.. */
+	if (child->ptrace & PT_DTRACE) {
+		struct pt_regs *regs = get_child_regs(child);
+		regs->eflags &= ~TRAP_FLAG;
+		child->ptrace &= ~PT_DTRACE;
+	}
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{ 
+	clear_singlestep(child);
+}
+
+/*
+ * Perform get_thread_area on behalf of the traced child.
+ */
+static int
+ptrace_get_thread_area(struct task_struct *child,
+		       int idx, struct user_desc __user *user_desc)
+{
+	struct user_desc info;
+	struct desc_struct *desc;
+
+/*
+ * Get the current Thread-Local Storage area:
+ */
+
+#define GET_BASE(desc) ( \
+	(((desc)->a >> 16) & 0x0000ffff) | \
+	(((desc)->b << 16) & 0x00ff0000) | \
+	( (desc)->b        & 0xff000000)   )
+
+#define GET_LIMIT(desc) ( \
+	((desc)->a & 0x0ffff) | \
+	 ((desc)->b & 0xf0000) )
+
+#define GET_32BIT(desc)		(((desc)->b >> 22) & 1)
+#define GET_CONTENTS(desc)	(((desc)->b >> 10) & 3)
+#define GET_WRITABLE(desc)	(((desc)->b >>  9) & 1)
+#define GET_LIMIT_PAGES(desc)	(((desc)->b >> 23) & 1)
+#define GET_PRESENT(desc)	(((desc)->b >> 15) & 1)
+#define GET_USEABLE(desc)	(((desc)->b >> 20) & 1)
+
+	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+		return -EINVAL;
+
+	desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+
+	info.entry_number = idx;
+	info.base_addr = GET_BASE(desc);
+	info.limit = GET_LIMIT(desc);
+	info.seg_32bit = GET_32BIT(desc);
+	info.contents = GET_CONTENTS(desc);
+	info.read_exec_only = !GET_WRITABLE(desc);
+	info.limit_in_pages = GET_LIMIT_PAGES(desc);
+	info.seg_not_present = !GET_PRESENT(desc);
+	info.useable = GET_USEABLE(desc);
+
+	if (copy_to_user(user_desc, &info, sizeof(info)))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Perform set_thread_area on behalf of the traced child.
+ */
+static int
+ptrace_set_thread_area(struct task_struct *child,
+		       int idx, struct user_desc __user *user_desc)
+{
+	struct user_desc info;
+	struct desc_struct *desc;
+
+	if (copy_from_user(&info, user_desc, sizeof(info)))
+		return -EFAULT;
+
+	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+		return -EINVAL;
+
+	desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
+	if (LDT_empty(&info)) {
+		desc->a = 0;
+		desc->b = 0;
+	} else {
+		desc->a = LDT_entry_a(&info);
+		desc->b = LDT_entry_b(&info);
+	}
+
+	return 0;
+}
+
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+{
+	struct task_struct *child;
+	struct user * dummy = NULL;
+	int i, ret;
+	unsigned long __user *datap = (unsigned long __user *)data;
+
+	lock_kernel();
+	ret = -EPERM;
+	if (request == PTRACE_TRACEME) {
+		/* are we already being traced? */
+		if (current->ptrace & PT_PTRACED)
+			goto out;
+		ret = security_ptrace(current->parent, current);
+		if (ret)
+			goto out;
+		/* set the ptrace bit in the process flags. */
+		current->ptrace |= PT_PTRACED;
+		ret = 0;
+		goto out;
+	}
+	ret = -ESRCH;
+	read_lock(&tasklist_lock);
+	child = find_task_by_pid(pid);
+	if (child)
+		get_task_struct(child);
+	read_unlock(&tasklist_lock);
+	if (!child)
+		goto out;
+
+	ret = -EPERM;
+	if (pid == 1)		/* you may not mess with init */
+		goto out_tsk;
+
+	if (request == PTRACE_ATTACH) {
+		ret = ptrace_attach(child);
+		goto out_tsk;
+	}
+
+	ret = ptrace_check_attach(child, request == PTRACE_KILL);
+	if (ret < 0)
+		goto out_tsk;
+
+	switch (request) {
+	/* when I and D space are separate, these will need to be fixed. */
+	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
+	case PTRACE_PEEKDATA: {
+		unsigned long tmp;
+		int copied;
+
+		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+		ret = -EIO;
+		if (copied != sizeof(tmp))
+			break;
+		ret = put_user(tmp, datap);
+		break;
+	}
+
+	/* read the word at location addr in the USER area. */
+	case PTRACE_PEEKUSR: {
+		unsigned long tmp;
+
+		ret = -EIO;
+		if ((addr & 3) || addr < 0 || 
+		    addr > sizeof(struct user) - 3)
+			break;
+
+		tmp = 0;  /* Default return condition */
+		if(addr < FRAME_SIZE*sizeof(long))
+			tmp = getreg(child, addr);
+		if(addr >= (long) &dummy->u_debugreg[0] &&
+		   addr <= (long) &dummy->u_debugreg[7]){
+			addr -= (long) &dummy->u_debugreg[0];
+			addr = addr >> 2;
+			tmp = child->thread.debugreg[addr];
+		}
+		ret = put_user(tmp, datap);
+		break;
+	}
+
+	/* when I and D space are separate, this will have to be fixed. */
+	case PTRACE_POKETEXT: /* write the word at location addr. */
+	case PTRACE_POKEDATA:
+		ret = 0;
+		if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
+			break;
+		ret = -EIO;
+		break;
+
+	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
+		ret = -EIO;
+		if ((addr & 3) || addr < 0 || 
+		    addr > sizeof(struct user) - 3)
+			break;
+
+		if (addr < FRAME_SIZE*sizeof(long)) {
+			ret = putreg(child, addr, data);
+			break;
+		}
+		/* We need to be very careful here.  We implicitly
+		   want to modify a portion of the task_struct, and we
+		   have to be selective about what portions we allow someone
+		   to modify. */
+
+		  ret = -EIO;
+		  if(addr >= (long) &dummy->u_debugreg[0] &&
+		     addr <= (long) &dummy->u_debugreg[7]){
+
+			  if(addr == (long) &dummy->u_debugreg[4]) break;
+			  if(addr == (long) &dummy->u_debugreg[5]) break;
+			  if(addr < (long) &dummy->u_debugreg[4] &&
+			     ((unsigned long) data) >= TASK_SIZE-3) break;
+			  
+			  /* Sanity-check data. Take one half-byte at once with
+			   * check = (val >> (16 + 4*i)) & 0xf. It contains the
+			   * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
+			   * 2 and 3 are LENi. Given a list of invalid values,
+			   * we do mask |= 1 << invalid_value, so that
+			   * (mask >> check) & 1 is a correct test for invalid
+			   * values.
+			   *
+			   * R/Wi contains the type of the breakpoint /
+			   * watchpoint, LENi contains the length of the watched
+			   * data in the watchpoint case.
+			   *
+			   * The invalid values are:
+			   * - LENi == 0x10 (undefined), so mask |= 0x0f00.
+			   * - R/Wi == 0x10 (break on I/O reads or writes), so
+			   *   mask |= 0x4444.
+			   * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
+			   *   0x1110.
+			   *
+			   * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
+			   *
+			   * See the Intel Manual "System Programming Guide",
+			   * 15.2.4
+			   *
+			   * Note that LENi == 0x10 is defined on x86_64 in long
+			   * mode (i.e. even for 32-bit userspace software, but
+			   * 64-bit kernel), so the x86_64 mask value is 0x5454.
+			   * See the AMD manual no. 24593 (AMD64 System
+			   * Programming)*/
+
+			  if(addr == (long) &dummy->u_debugreg[7]) {
+				  data &= ~DR_CONTROL_RESERVED;
+				  for(i=0; i<4; i++)
+					  if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
+						  goto out_tsk;
+			  }
+
+			  addr -= (long) &dummy->u_debugreg;
+			  addr = addr >> 2;
+			  child->thread.debugreg[addr] = data;
+			  ret = 0;
+		  }
+		  break;
+
+	case PTRACE_SYSCALL:	/* continue and stop at next (return from) syscall */
+	case PTRACE_CONT:	/* restart after signal. */
+		ret = -EIO;
+		if ((unsigned long) data > _NSIG)
+			break;
+		if (request == PTRACE_SYSCALL) {
+			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		}
+		else {
+			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		}
+		child->exit_code = data;
+		/* make sure the single step bit is not set. */
+		clear_singlestep(child);
+		wake_up_process(child);
+		ret = 0;
+		break;
+
+/*
+ * make the child exit.  Best I can do is send it a sigkill. 
+ * perhaps it should be put in the status that it wants to 
+ * exit.
+ */
+	case PTRACE_KILL:
+		ret = 0;
+		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
+			break;
+		child->exit_code = SIGKILL;
+		/* make sure the single step bit is not set. */
+		clear_singlestep(child);
+		wake_up_process(child);
+		break;
+
+	case PTRACE_SINGLESTEP:	/* set the trap flag. */
+		ret = -EIO;
+		if ((unsigned long) data > _NSIG)
+			break;
+		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		set_singlestep(child);
+		child->exit_code = data;
+		/* give it a chance to run. */
+		wake_up_process(child);
+		ret = 0;
+		break;
+
+	case PTRACE_DETACH:
+		/* detach a process that was attached. */
+		ret = ptrace_detach(child, data);
+		break;
+
+	case PTRACE_GETREGS: { /* Get all gp regs from the child. */
+	  	if (!access_ok(VERIFY_WRITE, datap, FRAME_SIZE*sizeof(long))) {
+			ret = -EIO;
+			break;
+		}
+		for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) {
+			__put_user(getreg(child, i), datap);
+			datap++;
+		}
+		ret = 0;
+		break;
+	}
+
+	case PTRACE_SETREGS: { /* Set all gp regs in the child. */
+		unsigned long tmp;
+	  	if (!access_ok(VERIFY_READ, datap, FRAME_SIZE*sizeof(long))) {
+			ret = -EIO;
+			break;
+		}
+		for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) {
+			__get_user(tmp, datap);
+			putreg(child, i, tmp);
+			datap++;
+		}
+		ret = 0;
+		break;
+	}
+
+	case PTRACE_GETFPREGS: { /* Get the child FPU state. */
+		if (!access_ok(VERIFY_WRITE, datap,
+			       sizeof(struct user_i387_struct))) {
+			ret = -EIO;
+			break;
+		}
+		ret = 0;
+		if (!tsk_used_math(child))
+			init_fpu(child);
+		get_fpregs((struct user_i387_struct __user *)data, child);
+		break;
+	}
+
+	case PTRACE_SETFPREGS: { /* Set the child FPU state. */
+		if (!access_ok(VERIFY_READ, datap,
+			       sizeof(struct user_i387_struct))) {
+			ret = -EIO;
+			break;
+		}
+		set_stopped_child_used_math(child);
+		set_fpregs(child, (struct user_i387_struct __user *)data);
+		ret = 0;
+		break;
+	}
+
+	case PTRACE_GETFPXREGS: { /* Get the child extended FPU state. */
+		if (!access_ok(VERIFY_WRITE, datap,
+			       sizeof(struct user_fxsr_struct))) {
+			ret = -EIO;
+			break;
+		}
+		if (!tsk_used_math(child))
+			init_fpu(child);
+		ret = get_fpxregs((struct user_fxsr_struct __user *)data, child);
+		break;
+	}
+
+	case PTRACE_SETFPXREGS: { /* Set the child extended FPU state. */
+		if (!access_ok(VERIFY_READ, datap,
+			       sizeof(struct user_fxsr_struct))) {
+			ret = -EIO;
+			break;
+		}
+		set_stopped_child_used_math(child);
+		ret = set_fpxregs(child, (struct user_fxsr_struct __user *)data);
+		break;
+	}
+
+	case PTRACE_GET_THREAD_AREA:
+		ret = ptrace_get_thread_area(child, addr,
+					(struct user_desc __user *) data);
+		break;
+
+	case PTRACE_SET_THREAD_AREA:
+		ret = ptrace_set_thread_area(child, addr,
+					(struct user_desc __user *) data);
+		break;
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+out_tsk:
+	put_task_struct(child);
+out:
+	unlock_kernel();
+	return ret;
+}
+
+void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
+{
+	struct siginfo info;
+
+	tsk->thread.trap_no = 1;
+	tsk->thread.error_code = error_code;
+
+	memset(&info, 0, sizeof(info));
+	info.si_signo = SIGTRAP;
+	info.si_code = TRAP_BRKPT;
+
+	/* User-mode eip? */
+	info.si_addr = user_mode(regs) ? (void __user *) regs->eip : NULL;
+
+	/* Send us the fakey SIGTRAP */
+	force_sig_info(SIGTRAP, &info, tsk);
+}
+
+/* notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+__attribute__((regparm(3)))
+void do_syscall_trace(struct pt_regs *regs, int entryexit)
+{
+	/* do the secure computing check first */
+	secure_computing(regs->orig_eax);
+
+	if (unlikely(current->audit_context)) {
+		if (!entryexit)
+			audit_syscall_entry(current, regs->orig_eax,
+					    regs->ebx, regs->ecx,
+					    regs->edx, regs->esi);
+		else
+			audit_syscall_exit(current, regs->eax);
+	}
+
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+
+	/* Fake a debug trap */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		send_sigtrap(current, regs, 0);
+
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+
+	/* the 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
diff --git a/arch/i386/kernel/quirks.c b/arch/i386/kernel/quirks.c
new file mode 100644
index 000000000000..aaf89cb2bc51
--- /dev/null
+++ b/arch/i386/kernel/quirks.c
@@ -0,0 +1,52 @@
+/*
+ * This file contains work-arounds for x86 and x86_64 platform bugs.
+ */
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
+
+static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
+{
+	u8 config, rev;
+	u32 word;
+
+	/* BIOS may enable hardware IRQ balancing for
+	 * E7520/E7320/E7525(revision ID 0x9 and below)
+	 * based platforms.
+	 * Disable SW irqbalance/affinity on those platforms.
+	 */
+	pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
+	if (rev > 0x9)
+		return;
+
+	printk(KERN_INFO "Intel E7520/7320/7525 detected.");
+
+	/* enable access to config space*/
+	pci_read_config_byte(dev, 0xf4, &config);
+	config |= 0x2;
+	pci_write_config_byte(dev, 0xf4, config);
+
+	/* read xTPR register */
+	raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
+
+	if (!(word & (1 << 13))) {
+		printk(KERN_INFO "Disabling irq balancing and affinity\n");
+#ifdef CONFIG_IRQBALANCE
+		irqbalance_disable("");
+#endif
+		noirqdebug_setup("");
+#ifdef CONFIG_PROC_FS
+		no_irq_affinity = 1;
+#endif
+	}
+
+	config &= ~0x2;
+	/* disable access to config space*/
+	pci_write_config_byte(dev, 0xf4, config);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7320_MCH,	quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7525_MCH,	quirk_intel_irqbalance);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7520_MCH,	quirk_intel_irqbalance);
+#endif
diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c
new file mode 100644
index 000000000000..3d7e994563df
--- /dev/null
+++ b/arch/i386/kernel/reboot.c
@@ -0,0 +1,382 @@
+/*
+ *  linux/arch/i386/kernel/reboot.c
+ */
+
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/efi.h>
+#include <linux/dmi.h>
+#include <asm/uaccess.h>
+#include <asm/apic.h>
+#include "mach_reboot.h"
+
+/*
+ * Power off function, if any
+ */
+void (*pm_power_off)(void);
+
+static int reboot_mode;
+static int reboot_thru_bios;
+
+#ifdef CONFIG_SMP
+int reboot_smp = 0;
+static int reboot_cpu = -1;
+/* shamelessly grabbed from lib/vsprintf.c for readability */
+#define is_digit(c)	((c) >= '0' && (c) <= '9')
+#endif
+static int __init reboot_setup(char *str)
+{
+	while(1) {
+		switch (*str) {
+		case 'w': /* "warm" reboot (no memory testing etc) */
+			reboot_mode = 0x1234;
+			break;
+		case 'c': /* "cold" reboot (with memory testing etc) */
+			reboot_mode = 0x0;
+			break;
+		case 'b': /* "bios" reboot by jumping through the BIOS */
+			reboot_thru_bios = 1;
+			break;
+		case 'h': /* "hard" reboot by toggling RESET and/or crashing the CPU */
+			reboot_thru_bios = 0;
+			break;
+#ifdef CONFIG_SMP
+		case 's': /* "smp" reboot by executing reset on BSP or other CPU*/
+			reboot_smp = 1;
+			if (is_digit(*(str+1))) {
+				reboot_cpu = (int) (*(str+1) - '0');
+				if (is_digit(*(str+2))) 
+					reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0');
+			}
+				/* we will leave sorting out the final value 
+				when we are ready to reboot, since we might not
+ 				have set up boot_cpu_id or smp_num_cpu */
+			break;
+#endif
+		}
+		if((str = strchr(str,',')) != NULL)
+			str++;
+		else
+			break;
+	}
+	return 1;
+}
+
+__setup("reboot=", reboot_setup);
+
+/*
+ * Reboot options and system auto-detection code provided by
+ * Dell Inc. so their systems "just work". :-)
+ */
+
+/*
+ * Some machines require the "reboot=b"  commandline option, this quirk makes that automatic.
+ */
+static int __init set_bios_reboot(struct dmi_system_id *d)
+{
+	if (!reboot_thru_bios) {
+		reboot_thru_bios = 1;
+		printk(KERN_INFO "%s series board detected. Selecting BIOS-method for reboots.\n", d->ident);
+	}
+	return 0;
+}
+
+/*
+ * Some machines require the "reboot=s"  commandline option, this quirk makes that automatic.
+ */
+static int __init set_smp_reboot(struct dmi_system_id *d)
+{
+#ifdef CONFIG_SMP
+	if (!reboot_smp) {
+		reboot_smp = 1;
+		printk(KERN_INFO "%s series board detected. Selecting SMP-method for reboots.\n", d->ident);
+	}
+#endif
+	return 0;
+}
+
+/*
+ * Some machines require the "reboot=b,s"  commandline option, this quirk makes that automatic.
+ */
+static int __init set_smp_bios_reboot(struct dmi_system_id *d)
+{
+	set_smp_reboot(d);
+	set_bios_reboot(d);
+	return 0;
+}
+
+static struct dmi_system_id __initdata reboot_dmi_table[] = {
+	{	/* Handle problems with rebooting on Dell 1300's */
+		.callback = set_smp_bios_reboot,
+		.ident = "Dell PowerEdge 1300",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"),
+		},
+	},
+	{	/* Handle problems with rebooting on Dell 300's */
+		.callback = set_bios_reboot,
+		.ident = "Dell PowerEdge 300",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"),
+		},
+	},
+	{	/* Handle problems with rebooting on Dell 2400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell PowerEdge 2400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
+		},
+	},
+	{ }
+};
+
+static int __init reboot_init(void)
+{
+	dmi_check_system(reboot_dmi_table);
+	return 0;
+}
+
+core_initcall(reboot_init);
+
+/* The following code and data reboots the machine by switching to real
+   mode and jumping to the BIOS reset entry point, as if the CPU has
+   really been reset.  The previous version asked the keyboard
+   controller to pulse the CPU reset line, which is more thorough, but
+   doesn't work with at least one type of 486 motherboard.  It is easy
+   to stop this code working; hence the copious comments. */
+
+static unsigned long long
+real_mode_gdt_entries [3] =
+{
+	0x0000000000000000ULL,	/* Null descriptor */
+	0x00009a000000ffffULL,	/* 16-bit real-mode 64k code at 0x00000000 */
+	0x000092000100ffffULL	/* 16-bit real-mode 64k data at 0x00000100 */
+};
+
+static struct
+{
+	unsigned short       size __attribute__ ((packed));
+	unsigned long long * base __attribute__ ((packed));
+}
+real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, real_mode_gdt_entries },
+real_mode_idt = { 0x3ff, NULL },
+no_idt = { 0, NULL };
+
+
+/* This is 16-bit protected mode code to disable paging and the cache,
+   switch to real mode and jump to the BIOS reset code.
+
+   The instruction that switches to real mode by writing to CR0 must be
+   followed immediately by a far jump instruction, which set CS to a
+   valid value for real mode, and flushes the prefetch queue to avoid
+   running instructions that have already been decoded in protected
+   mode.
+
+   Clears all the flags except ET, especially PG (paging), PE
+   (protected-mode enable) and TS (task switch for coprocessor state
+   save).  Flushes the TLB after paging has been disabled.  Sets CD and
+   NW, to disable the cache on a 486, and invalidates the cache.  This
+   is more like the state of a 486 after reset.  I don't know if
+   something else should be done for other chips.
+
+   More could be done here to set up the registers as if a CPU reset had
+   occurred; hopefully real BIOSs don't assume much. */
+
+static unsigned char real_mode_switch [] =
+{
+	0x66, 0x0f, 0x20, 0xc0,			/*    movl  %cr0,%eax        */
+	0x66, 0x83, 0xe0, 0x11,			/*    andl  $0x00000011,%eax */
+	0x66, 0x0d, 0x00, 0x00, 0x00, 0x60,	/*    orl   $0x60000000,%eax */
+	0x66, 0x0f, 0x22, 0xc0,			/*    movl  %eax,%cr0        */
+	0x66, 0x0f, 0x22, 0xd8,			/*    movl  %eax,%cr3        */
+	0x66, 0x0f, 0x20, 0xc3,			/*    movl  %cr0,%ebx        */
+	0x66, 0x81, 0xe3, 0x00, 0x00, 0x00, 0x60,	/*    andl  $0x60000000,%ebx */
+	0x74, 0x02,				/*    jz    f                */
+	0x0f, 0x09,				/*    wbinvd                 */
+	0x24, 0x10,				/* f: andb  $0x10,al         */
+	0x66, 0x0f, 0x22, 0xc0			/*    movl  %eax,%cr0        */
+};
+static unsigned char jump_to_bios [] =
+{
+	0xea, 0x00, 0x00, 0xff, 0xff		/*    ljmp  $0xffff,$0x0000  */
+};
+
+/*
+ * Switch to real mode and then execute the code
+ * specified by the code and length parameters.
+ * We assume that length will aways be less that 100!
+ */
+void machine_real_restart(unsigned char *code, int length)
+{
+	unsigned long flags;
+
+	local_irq_disable();
+
+	/* Write zero to CMOS register number 0x0f, which the BIOS POST
+	   routine will recognize as telling it to do a proper reboot.  (Well
+	   that's what this book in front of me says -- it may only apply to
+	   the Phoenix BIOS though, it's not clear).  At the same time,
+	   disable NMIs by setting the top bit in the CMOS address register,
+	   as we're about to do peculiar things to the CPU.  I'm not sure if
+	   `outb_p' is needed instead of just `outb'.  Use it to be on the
+	   safe side.  (Yes, CMOS_WRITE does outb_p's. -  Paul G.)
+	 */
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	CMOS_WRITE(0x00, 0x8f);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	/* Remap the kernel at virtual address zero, as well as offset zero
+	   from the kernel segment.  This assumes the kernel segment starts at
+	   virtual address PAGE_OFFSET. */
+
+	memcpy (swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
+		sizeof (swapper_pg_dir [0]) * KERNEL_PGD_PTRS);
+
+	/*
+	 * Use `swapper_pg_dir' as our page directory.
+	 */
+	load_cr3(swapper_pg_dir);
+
+	/* Write 0x1234 to absolute memory location 0x472.  The BIOS reads
+	   this on booting to tell it to "Bypass memory test (also warm
+	   boot)".  This seems like a fairly standard thing that gets set by
+	   REBOOT.COM programs, and the previous reset routine did this
+	   too. */
+
+	*((unsigned short *)0x472) = reboot_mode;
+
+	/* For the switch to real mode, copy some code to low memory.  It has
+	   to be in the first 64k because it is running in 16-bit mode, and it
+	   has to have the same physical and virtual address, because it turns
+	   off paging.  Copy it near the end of the first page, out of the way
+	   of BIOS variables. */
+
+	memcpy ((void *) (0x1000 - sizeof (real_mode_switch) - 100),
+		real_mode_switch, sizeof (real_mode_switch));
+	memcpy ((void *) (0x1000 - 100), code, length);
+
+	/* Set up the IDT for real mode. */
+
+	__asm__ __volatile__ ("lidt %0" : : "m" (real_mode_idt));
+
+	/* Set up a GDT from which we can load segment descriptors for real
+	   mode.  The GDT is not used in real mode; it is just needed here to
+	   prepare the descriptors. */
+
+	__asm__ __volatile__ ("lgdt %0" : : "m" (real_mode_gdt));
+
+	/* Load the data segment registers, and thus the descriptors ready for
+	   real mode.  The base address of each segment is 0x100, 16 times the
+	   selector value being loaded here.  This is so that the segment
+	   registers don't have to be reloaded after switching to real mode:
+	   the values are consistent for real mode operation already. */
+
+	__asm__ __volatile__ ("movl $0x0010,%%eax\n"
+				"\tmovl %%eax,%%ds\n"
+				"\tmovl %%eax,%%es\n"
+				"\tmovl %%eax,%%fs\n"
+				"\tmovl %%eax,%%gs\n"
+				"\tmovl %%eax,%%ss" : : : "eax");
+
+	/* Jump to the 16-bit code that we copied earlier.  It disables paging
+	   and the cache, switches to real mode, and jumps to the BIOS reset
+	   entry point. */
+
+	__asm__ __volatile__ ("ljmp $0x0008,%0"
+				:
+				: "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100)));
+}
+
+void machine_restart(char * __unused)
+{
+#ifdef CONFIG_SMP
+	int cpuid;
+	
+	cpuid = GET_APIC_ID(apic_read(APIC_ID));
+
+	if (reboot_smp) {
+
+		/* check to see if reboot_cpu is valid 
+		   if its not, default to the BSP */
+		if ((reboot_cpu == -1) ||  
+		      (reboot_cpu > (NR_CPUS -1))  || 
+		      !physid_isset(cpuid, phys_cpu_present_map))
+			reboot_cpu = boot_cpu_physical_apicid;
+
+		reboot_smp = 0;  /* use this as a flag to only go through this once*/
+		/* re-run this function on the other CPUs
+		   it will fall though this section since we have 
+		   cleared reboot_smp, and do the reboot if it is the
+		   correct CPU, otherwise it halts. */
+		if (reboot_cpu != cpuid)
+			smp_call_function((void *)machine_restart , NULL, 1, 0);
+	}
+
+	/* if reboot_cpu is still -1, then we want a tradional reboot, 
+	   and if we are not running on the reboot_cpu,, halt */
+	if ((reboot_cpu != -1) && (cpuid != reboot_cpu)) {
+		for (;;)
+		__asm__ __volatile__ ("hlt");
+	}
+	/*
+	 * Stop all CPUs and turn off local APICs and the IO-APIC, so
+	 * other OSs see a clean IRQ state.
+	 */
+	smp_send_stop();
+#endif /* CONFIG_SMP */
+
+	lapic_shutdown();
+
+#ifdef CONFIG_X86_IO_APIC
+	disable_IO_APIC();
+#endif
+
+	if (!reboot_thru_bios) {
+		if (efi_enabled) {
+			efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL);
+			__asm__ __volatile__("lidt %0": :"m" (no_idt));
+			__asm__ __volatile__("int3");
+		}
+		/* rebooting needs to touch the page at absolute addr 0 */
+		*((unsigned short *)__va(0x472)) = reboot_mode;
+		for (;;) {
+			mach_reboot();
+			/* That didn't work - force a triple fault.. */
+			__asm__ __volatile__("lidt %0": :"m" (no_idt));
+			__asm__ __volatile__("int3");
+		}
+	}
+	if (efi_enabled)
+		efi.reset_system(EFI_RESET_WARM, EFI_SUCCESS, 0, NULL);
+
+	machine_real_restart(jump_to_bios, sizeof(jump_to_bios));
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+void machine_halt(void)
+{
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+void machine_power_off(void)
+{
+	lapic_shutdown();
+
+	if (efi_enabled)
+		efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL);
+	if (pm_power_off)
+		pm_power_off();
+}
+
+EXPORT_SYMBOL(machine_power_off);
+
diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c
new file mode 100644
index 000000000000..69e203a0d330
--- /dev/null
+++ b/arch/i386/kernel/scx200.c
@@ -0,0 +1,167 @@
+/* linux/arch/i386/kernel/scx200.c 
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   National Semiconductor SCx200 support. */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <linux/scx200.h>
+
+/* Verify that the configuration block really is there */
+#define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base))
+
+#define NAME "scx200"
+
+MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
+MODULE_DESCRIPTION("NatSemi SCx200 Driver");
+MODULE_LICENSE("GPL");
+
+unsigned scx200_gpio_base = 0;
+long scx200_gpio_shadow[2];
+
+unsigned scx200_cb_base = 0;
+
+static struct pci_device_id scx200_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS)   },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS)   },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci,scx200_tbl);
+
+static int __devinit scx200_probe(struct pci_dev *, const struct pci_device_id *);
+
+static struct pci_driver scx200_pci_driver = {
+	.name = "scx200",
+	.id_table = scx200_tbl,
+	.probe = scx200_probe,
+};
+
+static DEFINE_SPINLOCK(scx200_gpio_config_lock);
+
+static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int bank;
+	unsigned base;
+
+	if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE ||
+	    pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) {
+		base = pci_resource_start(pdev, 0);
+		printk(KERN_INFO NAME ": GPIO base 0x%x\n", base);
+
+		if (request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO") == 0) {
+			printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n");
+			return -EBUSY;
+		}
+
+		scx200_gpio_base = base;
+
+		/* read the current values driven on the GPIO signals */
+		for (bank = 0; bank < 2; ++bank)
+			scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank);
+
+	} else {
+		/* find the base of the Configuration Block */
+		if (scx200_cb_probe(SCx200_CB_BASE_FIXED)) {
+			scx200_cb_base = SCx200_CB_BASE_FIXED;
+		} else {
+			pci_read_config_dword(pdev, SCx200_CBA_SCRATCH, &base);
+			if (scx200_cb_probe(base)) {
+				scx200_cb_base = base;
+			} else {
+				printk(KERN_WARNING NAME ": Configuration Block not found\n");
+				return -ENODEV;
+			}
+		}
+		printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base);
+	}
+
+	return 0;
+}
+
+u32 scx200_gpio_configure(int index, u32 mask, u32 bits)
+{
+	u32 config, new_config;
+	unsigned long flags;
+
+	spin_lock_irqsave(&scx200_gpio_config_lock, flags);
+
+	outl(index, scx200_gpio_base + 0x20);
+	config = inl(scx200_gpio_base + 0x24);
+
+	new_config = (config & mask) | bits;
+	outl(new_config, scx200_gpio_base + 0x24);
+
+	spin_unlock_irqrestore(&scx200_gpio_config_lock, flags);
+
+	return config;
+}
+
+#if 0
+void scx200_gpio_dump(unsigned index)
+{
+	u32 config = scx200_gpio_configure(index, ~0, 0);
+	printk(KERN_DEBUG "GPIO%02u: 0x%08lx", index, (unsigned long)config);
+	
+	if (config & 1) 
+		printk(" OE"); /* output enabled */
+	else
+		printk(" TS"); /* tristate */
+	if (config & 2) 
+		printk(" PP"); /* push pull */
+	else
+		printk(" OD"); /* open drain */
+	if (config & 4) 
+		printk(" PUE"); /* pull up enabled */
+	else
+		printk(" PUD"); /* pull up disabled */
+	if (config & 8) 
+		printk(" LOCKED"); /* locked */
+	if (config & 16) 
+		printk(" LEVEL"); /* level input */
+	else
+		printk(" EDGE"); /* edge input */
+	if (config & 32) 
+		printk(" HI"); /* trigger on rising edge */
+	else
+		printk(" LO"); /* trigger on falling edge */
+	if (config & 64) 
+		printk(" DEBOUNCE"); /* debounce */
+	printk("\n");
+}
+#endif  /*  0  */
+
+static int __init scx200_init(void)
+{
+	printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
+
+	return pci_module_init(&scx200_pci_driver);
+}
+
+static void __exit scx200_cleanup(void)
+{
+	pci_unregister_driver(&scx200_pci_driver);
+	release_region(scx200_gpio_base, SCx200_GPIO_SIZE);
+}
+
+module_init(scx200_init);
+module_exit(scx200_cleanup);
+
+EXPORT_SYMBOL(scx200_gpio_base);
+EXPORT_SYMBOL(scx200_gpio_shadow);
+EXPORT_SYMBOL(scx200_gpio_configure);
+EXPORT_SYMBOL(scx200_cb_base);
+
+/*
+    Local variables:
+        compile-command: "make -k -C ../../.. SUBDIRS=arch/i386/kernel modules"
+        c-basic-offset: 8
+    End:
+*/
diff --git a/arch/i386/kernel/semaphore.c b/arch/i386/kernel/semaphore.c
new file mode 100644
index 000000000000..469f496e55c0
--- /dev/null
+++ b/arch/i386/kernel/semaphore.c
@@ -0,0 +1,297 @@
+/*
+ * i386 semaphore implementation.
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ *
+ * Portions Copyright 1999 Red Hat, Inc.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org>
+ */
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <asm/semaphore.h>
+
+/*
+ * Semaphores are implemented using a two-way counter:
+ * The "count" variable is decremented for each process
+ * that tries to acquire the semaphore, while the "sleeping"
+ * variable is a count of such acquires.
+ *
+ * Notably, the inline "up()" and "down()" functions can
+ * efficiently test if they need to do any extra work (up
+ * needs to do something only if count was negative before
+ * the increment operation.
+ *
+ * "sleeping" and the contention routine ordering is protected
+ * by the spinlock in the semaphore's waitqueue head.
+ *
+ * Note that these functions are only called when there is
+ * contention on the lock, and as such all this is the
+ * "non-critical" part of the whole semaphore business. The
+ * critical part is the inline stuff in <asm/semaphore.h>
+ * where we want to avoid any extra jumps and calls.
+ */
+
+/*
+ * Logic:
+ *  - only on a boundary condition do we need to care. When we go
+ *    from a negative count to a non-negative, we wake people up.
+ *  - when we go from a non-negative count to a negative do we
+ *    (a) synchronize with the "sleeper" count and (b) make sure
+ *    that we're on the wakeup list before we synchronize so that
+ *    we cannot lose wakeup events.
+ */
+
+static fastcall void __attribute_used__  __up(struct semaphore *sem)
+{
+	wake_up(&sem->wait);
+}
+
+static fastcall void __attribute_used__ __sched __down(struct semaphore * sem)
+{
+	struct task_struct *tsk = current;
+	DECLARE_WAITQUEUE(wait, tsk);
+	unsigned long flags;
+
+	tsk->state = TASK_UNINTERRUPTIBLE;
+	spin_lock_irqsave(&sem->wait.lock, flags);
+	add_wait_queue_exclusive_locked(&sem->wait, &wait);
+
+	sem->sleepers++;
+	for (;;) {
+		int sleepers = sem->sleepers;
+
+		/*
+		 * Add "everybody else" into it. They aren't
+		 * playing, because we own the spinlock in
+		 * the wait_queue_head.
+		 */
+		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
+			sem->sleepers = 0;
+			break;
+		}
+		sem->sleepers = 1;	/* us - see -1 above */
+		spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+		schedule();
+
+		spin_lock_irqsave(&sem->wait.lock, flags);
+		tsk->state = TASK_UNINTERRUPTIBLE;
+	}
+	remove_wait_queue_locked(&sem->wait, &wait);
+	wake_up_locked(&sem->wait);
+	spin_unlock_irqrestore(&sem->wait.lock, flags);
+	tsk->state = TASK_RUNNING;
+}
+
+static fastcall int __attribute_used__ __sched __down_interruptible(struct semaphore * sem)
+{
+	int retval = 0;
+	struct task_struct *tsk = current;
+	DECLARE_WAITQUEUE(wait, tsk);
+	unsigned long flags;
+
+	tsk->state = TASK_INTERRUPTIBLE;
+	spin_lock_irqsave(&sem->wait.lock, flags);
+	add_wait_queue_exclusive_locked(&sem->wait, &wait);
+
+	sem->sleepers++;
+	for (;;) {
+		int sleepers = sem->sleepers;
+
+		/*
+		 * With signals pending, this turns into
+		 * the trylock failure case - we won't be
+		 * sleeping, and we* can't get the lock as
+		 * it has contention. Just correct the count
+		 * and exit.
+		 */
+		if (signal_pending(current)) {
+			retval = -EINTR;
+			sem->sleepers = 0;
+			atomic_add(sleepers, &sem->count);
+			break;
+		}
+
+		/*
+		 * Add "everybody else" into it. They aren't
+		 * playing, because we own the spinlock in
+		 * wait_queue_head. The "-1" is because we're
+		 * still hoping to get the semaphore.
+		 */
+		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
+			sem->sleepers = 0;
+			break;
+		}
+		sem->sleepers = 1;	/* us - see -1 above */
+		spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+		schedule();
+
+		spin_lock_irqsave(&sem->wait.lock, flags);
+		tsk->state = TASK_INTERRUPTIBLE;
+	}
+	remove_wait_queue_locked(&sem->wait, &wait);
+	wake_up_locked(&sem->wait);
+	spin_unlock_irqrestore(&sem->wait.lock, flags);
+
+	tsk->state = TASK_RUNNING;
+	return retval;
+}
+
+/*
+ * Trylock failed - make sure we correct for
+ * having decremented the count.
+ *
+ * We could have done the trylock with a
+ * single "cmpxchg" without failure cases,
+ * but then it wouldn't work on a 386.
+ */
+static fastcall int __attribute_used__ __down_trylock(struct semaphore * sem)
+{
+	int sleepers;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sem->wait.lock, flags);
+	sleepers = sem->sleepers + 1;
+	sem->sleepers = 0;
+
+	/*
+	 * Add "everybody else" and us into it. They aren't
+	 * playing, because we own the spinlock in the
+	 * wait_queue_head.
+	 */
+	if (!atomic_add_negative(sleepers, &sem->count)) {
+		wake_up_locked(&sem->wait);
+	}
+
+	spin_unlock_irqrestore(&sem->wait.lock, flags);
+	return 1;
+}
+
+
+/*
+ * The semaphore operations have a special calling sequence that
+ * allow us to do a simpler in-line version of them. These routines
+ * need to convert that sequence back into the C sequence when
+ * there is contention on the semaphore.
+ *
+ * %eax contains the semaphore pointer on entry. Save the C-clobbered
+ * registers (%eax, %edx and %ecx) except %eax whish is either a return
+ * value or just clobbered..
+ */
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __down_failed\n"
+"__down_failed:\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+	"pushl %ebp\n\t"
+	"movl  %esp,%ebp\n\t"
+#endif
+	"pushl %edx\n\t"
+	"pushl %ecx\n\t"
+	"call __down\n\t"
+	"popl %ecx\n\t"
+	"popl %edx\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+	"movl %ebp,%esp\n\t"
+	"popl %ebp\n\t"
+#endif
+	"ret"
+);
+
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __down_failed_interruptible\n"
+"__down_failed_interruptible:\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+	"pushl %ebp\n\t"
+	"movl  %esp,%ebp\n\t"
+#endif
+	"pushl %edx\n\t"
+	"pushl %ecx\n\t"
+	"call __down_interruptible\n\t"
+	"popl %ecx\n\t"
+	"popl %edx\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+	"movl %ebp,%esp\n\t"
+	"popl %ebp\n\t"
+#endif
+	"ret"
+);
+
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __down_failed_trylock\n"
+"__down_failed_trylock:\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+	"pushl %ebp\n\t"
+	"movl  %esp,%ebp\n\t"
+#endif
+	"pushl %edx\n\t"
+	"pushl %ecx\n\t"
+	"call __down_trylock\n\t"
+	"popl %ecx\n\t"
+	"popl %edx\n\t"
+#if defined(CONFIG_FRAME_POINTER)
+	"movl %ebp,%esp\n\t"
+	"popl %ebp\n\t"
+#endif
+	"ret"
+);
+
+asm(
+".section .sched.text\n"
+".align 4\n"
+".globl __up_wakeup\n"
+"__up_wakeup:\n\t"
+	"pushl %edx\n\t"
+	"pushl %ecx\n\t"
+	"call __up\n\t"
+	"popl %ecx\n\t"
+	"popl %edx\n\t"
+	"ret"
+);
+
+/*
+ * rw spinlock fallbacks
+ */
+#if defined(CONFIG_SMP)
+asm(
+".section .sched.text\n"
+".align	4\n"
+".globl	__write_lock_failed\n"
+"__write_lock_failed:\n\t"
+	LOCK "addl	$" RW_LOCK_BIAS_STR ",(%eax)\n"
+"1:	rep; nop\n\t"
+	"cmpl	$" RW_LOCK_BIAS_STR ",(%eax)\n\t"
+	"jne	1b\n\t"
+	LOCK "subl	$" RW_LOCK_BIAS_STR ",(%eax)\n\t"
+	"jnz	__write_lock_failed\n\t"
+	"ret"
+);
+
+asm(
+".section .sched.text\n"
+".align	4\n"
+".globl	__read_lock_failed\n"
+"__read_lock_failed:\n\t"
+	LOCK "incl	(%eax)\n"
+"1:	rep; nop\n\t"
+	"cmpl	$1,(%eax)\n\t"
+	"js	1b\n\t"
+	LOCK "decl	(%eax)\n\t"
+	"js	__read_lock_failed\n\t"
+	"ret"
+);
+#endif
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
new file mode 100644
index 000000000000..945ec73163c8
--- /dev/null
+++ b/arch/i386/kernel/setup.c
@@ -0,0 +1,1535 @@
+/*
+ *  linux/arch/i386/kernel/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *
+ *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ *
+ *  Memory region support
+ *	David Parsons <orc@pell.chi.il.us>, July-August 1999
+ *
+ *  Added E820 sanitization routine (removes overlapping memory regions);
+ *  Brian Moyle <bmoyle@mvista.com>, February 2001
+ *
+ * Moved CPU detection code to cpu/${cpu}.c
+ *    Patrick Mochel <mochel@osdl.org>, March 2002
+ *
+ *  Provisions for empty E820 memory regions (reported by certain BIOSes).
+ *  Alex Achenbach <xela@slit.de>, December 2002.
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
+#include <linux/apm_bios.h>
+#include <linux/initrd.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/mca.h>
+#include <linux/root_dev.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/edd.h>
+#include <linux/nodemask.h>
+#include <video/edid.h>
+#include <asm/e820.h>
+#include <asm/mpspec.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+#include <asm/sections.h>
+#include <asm/io_apic.h>
+#include <asm/ist.h>
+#include <asm/io.h>
+#include "setup_arch_pre.h"
+#include <bios_ebda.h>
+
+/* This value is set up by the early boot code to point to the value
+   immediately after the boot time page tables.  It contains a *physical*
+   address, and must not be in the .bss segment! */
+unsigned long init_pg_tables_end __initdata = ~0UL;
+
+int disable_pse __initdata = 0;
+
+/*
+ * Machine setup..
+ */
+
+#ifdef CONFIG_EFI
+int efi_enabled = 0;
+EXPORT_SYMBOL(efi_enabled);
+#endif
+
+/* cpu data as detected by the assembly code in head.S */
+struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+/* common cpu data for all cpus */
+struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+
+unsigned long mmu_cr4_features;
+
+#ifdef	CONFIG_ACPI_INTERPRETER
+	int acpi_disabled = 0;
+#else
+	int acpi_disabled = 1;
+#endif
+EXPORT_SYMBOL(acpi_disabled);
+
+#ifdef	CONFIG_ACPI_BOOT
+int __initdata acpi_force = 0;
+extern acpi_interrupt_flags	acpi_sci_flags;
+#endif
+
+/* for MCA, but anyone else can use it if they want */
+unsigned int machine_id;
+unsigned int machine_submodel_id;
+unsigned int BIOS_revision;
+unsigned int mca_pentium_flag;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0x10000000;
+
+/* Boot loader ID as an integer, for the benefit of proc_dointvec */
+int bootloader_type;
+
+/* user-defined highmem size */
+static unsigned int highmem_pages = -1;
+
+/*
+ * Setup options
+ */
+struct drive_info_struct { char dummy[32]; } drive_info;
+struct screen_info screen_info;
+struct apm_info apm_info;
+struct sys_desc_table_struct {
+	unsigned short length;
+	unsigned char table[0];
+};
+struct edid_info edid_info;
+struct ist_info ist_info;
+struct e820map e820;
+
+extern void early_cpu_init(void);
+extern void dmi_scan_machine(void);
+extern void generic_apic_probe(char *);
+extern int root_mountflags;
+
+unsigned long saved_videomode;
+
+#define RAMDISK_IMAGE_START_MASK  	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000	
+
+static char command_line[COMMAND_LINE_SIZE];
+
+unsigned char __initdata boot_params[PARAM_SIZE];
+
+static struct resource data_resource = {
+	.name	= "Kernel data",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+	.name	= "Kernel code",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource system_rom_resource = {
+	.name	= "System ROM",
+	.start	= 0xf0000,
+	.end	= 0xfffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource extension_rom_resource = {
+	.name	= "Extension ROM",
+	.start	= 0xe0000,
+	.end	= 0xeffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource adapter_rom_resources[] = { {
+	.name 	= "Adapter ROM",
+	.start	= 0xc8000,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+}, {
+	.name 	= "Adapter ROM",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+} };
+
+#define ADAPTER_ROM_RESOURCES \
+	(sizeof adapter_rom_resources / sizeof adapter_rom_resources[0])
+
+static struct resource video_rom_resource = {
+	.name 	= "Video ROM",
+	.start	= 0xc0000,
+	.end	= 0xc7fff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
+};
+
+static struct resource video_ram_resource = {
+	.name	= "Video RAM area",
+	.start	= 0xa0000,
+	.end	= 0xbffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource standard_io_resources[] = { {
+	.name	= "dma1",
+	.start	= 0x0000,
+	.end	= 0x001f,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "pic1",
+	.start	= 0x0020,
+	.end	= 0x0021,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name   = "timer0",
+	.start	= 0x0040,
+	.end    = 0x0043,
+	.flags  = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name   = "timer1",
+	.start  = 0x0050,
+	.end    = 0x0053,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "keyboard",
+	.start	= 0x0060,
+	.end	= 0x006f,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "dma page reg",
+	.start	= 0x0080,
+	.end	= 0x008f,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "pic2",
+	.start	= 0x00a0,
+	.end	= 0x00a1,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "dma2",
+	.start	= 0x00c0,
+	.end	= 0x00df,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+	.name	= "fpu",
+	.start	= 0x00f0,
+	.end	= 0x00ff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_IO
+} };
+
+#define STANDARD_IO_RESOURCES \
+	(sizeof standard_io_resources / sizeof standard_io_resources[0])
+
+#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)
+
+static int __init romchecksum(unsigned char *rom, unsigned long length)
+{
+	unsigned char *p, sum = 0;
+
+	for (p = rom; p < rom + length; p++)
+		sum += *p;
+	return sum == 0;
+}
+
+static void __init probe_roms(void)
+{
+	unsigned long start, length, upper;
+	unsigned char *rom;
+	int	      i;
+
+	/* video rom */
+	upper = adapter_rom_resources[0].start;
+	for (start = video_rom_resource.start; start < upper; start += 2048) {
+		rom = isa_bus_to_virt(start);
+		if (!romsignature(rom))
+			continue;
+
+		video_rom_resource.start = start;
+
+		/* 0 < length <= 0x7f * 512, historically */
+		length = rom[2] * 512;
+
+		/* if checksum okay, trust length byte */
+		if (length && romchecksum(rom, length))
+			video_rom_resource.end = start + length - 1;
+
+		request_resource(&iomem_resource, &video_rom_resource);
+		break;
+	}
+
+	start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
+	if (start < upper)
+		start = upper;
+
+	/* system rom */
+	request_resource(&iomem_resource, &system_rom_resource);
+	upper = system_rom_resource.start;
+
+	/* check for extension rom (ignore length byte!) */
+	rom = isa_bus_to_virt(extension_rom_resource.start);
+	if (romsignature(rom)) {
+		length = extension_rom_resource.end - extension_rom_resource.start + 1;
+		if (romchecksum(rom, length)) {
+			request_resource(&iomem_resource, &extension_rom_resource);
+			upper = extension_rom_resource.start;
+		}
+	}
+
+	/* check for adapter roms on 2k boundaries */
+	for (i = 0; i < ADAPTER_ROM_RESOURCES && start < upper; start += 2048) {
+		rom = isa_bus_to_virt(start);
+		if (!romsignature(rom))
+			continue;
+
+		/* 0 < length <= 0x7f * 512, historically */
+		length = rom[2] * 512;
+
+		/* but accept any length that fits if checksum okay */
+		if (!length || start + length > upper || !romchecksum(rom, length))
+			continue;
+
+		adapter_rom_resources[i].start = start;
+		adapter_rom_resources[i].end = start + length - 1;
+		request_resource(&iomem_resource, &adapter_rom_resources[i]);
+
+		start = adapter_rom_resources[i++].end & ~2047UL;
+	}
+}
+
+static void __init limit_regions(unsigned long long size)
+{
+	unsigned long long current_addr = 0;
+	int i;
+
+	if (efi_enabled) {
+		for (i = 0; i < memmap.nr_map; i++) {
+			current_addr = memmap.map[i].phys_addr +
+				       (memmap.map[i].num_pages << 12);
+			if (memmap.map[i].type == EFI_CONVENTIONAL_MEMORY) {
+				if (current_addr >= size) {
+					memmap.map[i].num_pages -=
+						(((current_addr-size) + PAGE_SIZE-1) >> PAGE_SHIFT);
+					memmap.nr_map = i + 1;
+					return;
+				}
+			}
+		}
+	}
+	for (i = 0; i < e820.nr_map; i++) {
+		if (e820.map[i].type == E820_RAM) {
+			current_addr = e820.map[i].addr + e820.map[i].size;
+			if (current_addr >= size) {
+				e820.map[i].size -= current_addr-size;
+				e820.nr_map = i + 1;
+				return;
+			}
+		}
+	}
+}
+
+static void __init add_memory_region(unsigned long long start,
+                                  unsigned long long size, int type)
+{
+	int x;
+
+	if (!efi_enabled) {
+       		x = e820.nr_map;
+
+		if (x == E820MAX) {
+		    printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+		    return;
+		}
+
+		e820.map[x].addr = start;
+		e820.map[x].size = size;
+		e820.map[x].type = type;
+		e820.nr_map++;
+	}
+} /* add_memory_region */
+
+#define E820_DEBUG	1
+
+static void __init print_memory_map(char *who)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		printk(" %s: %016Lx - %016Lx ", who,
+			e820.map[i].addr,
+			e820.map[i].addr + e820.map[i].size);
+		switch (e820.map[i].type) {
+		case E820_RAM:	printk("(usable)\n");
+				break;
+		case E820_RESERVED:
+				printk("(reserved)\n");
+				break;
+		case E820_ACPI:
+				printk("(ACPI data)\n");
+				break;
+		case E820_NVS:
+				printk("(ACPI NVS)\n");
+				break;
+		default:	printk("type %lu\n", e820.map[i].type);
+				break;
+		}
+	}
+}
+
+/*
+ * Sanitize the BIOS e820 map.
+ *
+ * Some e820 responses include overlapping entries.  The following 
+ * replaces the original e820 map with a new one, removing overlaps.
+ *
+ */
+struct change_member {
+	struct e820entry *pbios; /* pointer to original bios entry */
+	unsigned long long addr; /* address for this change point */
+};
+static struct change_member change_point_list[2*E820MAX] __initdata;
+static struct change_member *change_point[2*E820MAX] __initdata;
+static struct e820entry *overlap_list[E820MAX] __initdata;
+static struct e820entry new_bios[E820MAX] __initdata;
+
+static int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
+{
+	struct change_member *change_tmp;
+	unsigned long current_type, last_type;
+	unsigned long long last_addr;
+	int chgidx, still_changing;
+	int overlap_entries;
+	int new_bios_entry;
+	int old_nr, new_nr, chg_nr;
+	int i;
+
+	/*
+		Visually we're performing the following (1,2,3,4 = memory types)...
+
+		Sample memory map (w/overlaps):
+		   ____22__________________
+		   ______________________4_
+		   ____1111________________
+		   _44_____________________
+		   11111111________________
+		   ____________________33__
+		   ___________44___________
+		   __________33333_________
+		   ______________22________
+		   ___________________2222_
+		   _________111111111______
+		   _____________________11_
+		   _________________4______
+
+		Sanitized equivalent (no overlap):
+		   1_______________________
+		   _44_____________________
+		   ___1____________________
+		   ____22__________________
+		   ______11________________
+		   _________1______________
+		   __________3_____________
+		   ___________44___________
+		   _____________33_________
+		   _______________2________
+		   ________________1_______
+		   _________________4______
+		   ___________________2____
+		   ____________________33__
+		   ______________________4_
+	*/
+
+	/* if there's only one memory region, don't bother */
+	if (*pnr_map < 2)
+		return -1;
+
+	old_nr = *pnr_map;
+
+	/* bail out if we find any unreasonable addresses in bios map */
+	for (i=0; i<old_nr; i++)
+		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
+			return -1;
+
+	/* create pointers for initial change-point information (for sorting) */
+	for (i=0; i < 2*old_nr; i++)
+		change_point[i] = &change_point_list[i];
+
+	/* record all known change-points (starting and ending addresses),
+	   omitting those that are for empty memory regions */
+	chgidx = 0;
+	for (i=0; i < old_nr; i++)	{
+		if (biosmap[i].size != 0) {
+			change_point[chgidx]->addr = biosmap[i].addr;
+			change_point[chgidx++]->pbios = &biosmap[i];
+			change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
+			change_point[chgidx++]->pbios = &biosmap[i];
+		}
+	}
+	chg_nr = chgidx;    	/* true number of change-points */
+
+	/* sort change-point list by memory addresses (low -> high) */
+	still_changing = 1;
+	while (still_changing)	{
+		still_changing = 0;
+		for (i=1; i < chg_nr; i++)  {
+			/* if <current_addr> > <last_addr>, swap */
+			/* or, if current=<start_addr> & last=<end_addr>, swap */
+			if ((change_point[i]->addr < change_point[i-1]->addr) ||
+				((change_point[i]->addr == change_point[i-1]->addr) &&
+				 (change_point[i]->addr == change_point[i]->pbios->addr) &&
+				 (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
+			   )
+			{
+				change_tmp = change_point[i];
+				change_point[i] = change_point[i-1];
+				change_point[i-1] = change_tmp;
+				still_changing=1;
+			}
+		}
+	}
+
+	/* create a new bios memory map, removing overlaps */
+	overlap_entries=0;	 /* number of entries in the overlap table */
+	new_bios_entry=0;	 /* index for creating new bios map entries */
+	last_type = 0;		 /* start with undefined memory type */
+	last_addr = 0;		 /* start with 0 as last starting address */
+	/* loop through change-points, determining affect on the new bios map */
+	for (chgidx=0; chgidx < chg_nr; chgidx++)
+	{
+		/* keep track of all overlapping bios entries */
+		if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
+		{
+			/* add map entry to overlap list (> 1 entry implies an overlap) */
+			overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
+		}
+		else
+		{
+			/* remove entry from list (order independent, so swap with last) */
+			for (i=0; i<overlap_entries; i++)
+			{
+				if (overlap_list[i] == change_point[chgidx]->pbios)
+					overlap_list[i] = overlap_list[overlap_entries-1];
+			}
+			overlap_entries--;
+		}
+		/* if there are overlapping entries, decide which "type" to use */
+		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
+		current_type = 0;
+		for (i=0; i<overlap_entries; i++)
+			if (overlap_list[i]->type > current_type)
+				current_type = overlap_list[i]->type;
+		/* continue building up new bios map based on this information */
+		if (current_type != last_type)	{
+			if (last_type != 0)	 {
+				new_bios[new_bios_entry].size =
+					change_point[chgidx]->addr - last_addr;
+				/* move forward only if the new size was non-zero */
+				if (new_bios[new_bios_entry].size != 0)
+					if (++new_bios_entry >= E820MAX)
+						break; 	/* no more space left for new bios entries */
+			}
+			if (current_type != 0)	{
+				new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
+				new_bios[new_bios_entry].type = current_type;
+				last_addr=change_point[chgidx]->addr;
+			}
+			last_type = current_type;
+		}
+	}
+	new_nr = new_bios_entry;   /* retain count for new bios entries */
+
+	/* copy new bios mapping into original location */
+	memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
+	*pnr_map = new_nr;
+
+	return 0;
+}
+
+/*
+ * Copy the BIOS e820 map into a safe place.
+ *
+ * Sanity-check it while we're at it..
+ *
+ * If we're lucky and live on a modern system, the setup code
+ * will have given us a memory map that we can use to properly
+ * set up memory.  If we aren't, we'll fake a memory map.
+ *
+ * We check to see that the memory map contains at least 2 elements
+ * before we'll use it, because the detection code in setup.S may
+ * not be perfect and most every PC known to man has two memory
+ * regions: one from 0 to 640k, and one from 1mb up.  (The IBM
+ * thinkpad 560x, for example, does not cooperate with the memory
+ * detection code.)
+ */
+static int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
+{
+	/* Only one memory region (or negative)? Ignore it */
+	if (nr_map < 2)
+		return -1;
+
+	do {
+		unsigned long long start = biosmap->addr;
+		unsigned long long size = biosmap->size;
+		unsigned long long end = start + size;
+		unsigned long type = biosmap->type;
+
+		/* Overflow in 64 bits? Ignore the memory map. */
+		if (start > end)
+			return -1;
+
+		/*
+		 * Some BIOSes claim RAM in the 640k - 1M region.
+		 * Not right. Fix it up.
+		 */
+		if (type == E820_RAM) {
+			if (start < 0x100000ULL && end > 0xA0000ULL) {
+				if (start < 0xA0000ULL)
+					add_memory_region(start, 0xA0000ULL-start, type);
+				if (end <= 0x100000ULL)
+					continue;
+				start = 0x100000ULL;
+				size = end - start;
+			}
+		}
+		add_memory_region(start, size, type);
+	} while (biosmap++,--nr_map);
+	return 0;
+}
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+struct edd edd;
+#ifdef CONFIG_EDD_MODULE
+EXPORT_SYMBOL(edd);
+#endif
+/**
+ * copy_edd() - Copy the BIOS EDD information
+ *              from boot_params into a safe place.
+ *
+ */
+static inline void copy_edd(void)
+{
+     memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature));
+     memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info));
+     edd.mbr_signature_nr = EDD_MBR_SIG_NR;
+     edd.edd_info_nr = EDD_NR;
+}
+#else
+static inline void copy_edd(void)
+{
+}
+#endif
+
+/*
+ * Do NOT EVER look at the BIOS memory size location.
+ * It does not work on many machines.
+ */
+#define LOWMEMSIZE()	(0x9f000)
+
+static void __init parse_cmdline_early (char ** cmdline_p)
+{
+	char c = ' ', *to = command_line, *from = saved_command_line;
+	int len = 0;
+	int userdef = 0;
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+
+	for (;;) {
+		if (c != ' ')
+			goto next_char;
+		/*
+		 * "mem=nopentium" disables the 4MB page tables.
+		 * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
+		 * to <mem>, overriding the bios size.
+		 * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
+		 * <start> to <start>+<mem>, overriding the bios size.
+		 *
+		 * HPA tells me bootloaders need to parse mem=, so no new
+		 * option should be mem=  [also see Documentation/i386/boot.txt]
+		 */
+		if (!memcmp(from, "mem=", 4)) {
+			if (to != command_line)
+				to--;
+			if (!memcmp(from+4, "nopentium", 9)) {
+				from += 9+4;
+				clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+				disable_pse = 1;
+			} else {
+				/* If the user specifies memory size, we
+				 * limit the BIOS-provided memory map to
+				 * that size. exactmap can be used to specify
+				 * the exact map. mem=number can be used to
+				 * trim the existing memory map.
+				 */
+				unsigned long long mem_size;
+ 
+				mem_size = memparse(from+4, &from);
+				limit_regions(mem_size);
+				userdef=1;
+			}
+		}
+
+		else if (!memcmp(from, "memmap=", 7)) {
+			if (to != command_line)
+				to--;
+			if (!memcmp(from+7, "exactmap", 8)) {
+				from += 8+7;
+				e820.nr_map = 0;
+				userdef = 1;
+			} else {
+				/* If the user specifies memory size, we
+				 * limit the BIOS-provided memory map to
+				 * that size. exactmap can be used to specify
+				 * the exact map. mem=number can be used to
+				 * trim the existing memory map.
+				 */
+				unsigned long long start_at, mem_size;
+ 
+				mem_size = memparse(from+7, &from);
+				if (*from == '@') {
+					start_at = memparse(from+1, &from);
+					add_memory_region(start_at, mem_size, E820_RAM);
+				} else if (*from == '#') {
+					start_at = memparse(from+1, &from);
+					add_memory_region(start_at, mem_size, E820_ACPI);
+				} else if (*from == '$') {
+					start_at = memparse(from+1, &from);
+					add_memory_region(start_at, mem_size, E820_RESERVED);
+				} else {
+					limit_regions(mem_size);
+					userdef=1;
+				}
+			}
+		}
+
+		else if (!memcmp(from, "noexec=", 7))
+			noexec_setup(from + 7);
+
+
+#ifdef  CONFIG_X86_SMP
+		/*
+		 * If the BIOS enumerates physical processors before logical,
+		 * maxcpus=N at enumeration-time can be used to disable HT.
+		 */
+		else if (!memcmp(from, "maxcpus=", 8)) {
+			extern unsigned int maxcpus;
+
+			maxcpus = simple_strtoul(from + 8, NULL, 0);
+		}
+#endif
+
+#ifdef CONFIG_ACPI_BOOT
+		/* "acpi=off" disables both ACPI table parsing and interpreter */
+		else if (!memcmp(from, "acpi=off", 8)) {
+			disable_acpi();
+		}
+
+		/* acpi=force to over-ride black-list */
+		else if (!memcmp(from, "acpi=force", 10)) {
+			acpi_force = 1;
+			acpi_ht = 1;
+			acpi_disabled = 0;
+		}
+
+		/* acpi=strict disables out-of-spec workarounds */
+		else if (!memcmp(from, "acpi=strict", 11)) {
+			acpi_strict = 1;
+		}
+
+		/* Limit ACPI just to boot-time to enable HT */
+		else if (!memcmp(from, "acpi=ht", 7)) {
+			if (!acpi_force)
+				disable_acpi();
+			acpi_ht = 1;
+		}
+		
+		/* "pci=noacpi" disable ACPI IRQ routing and PCI scan */
+		else if (!memcmp(from, "pci=noacpi", 10)) {
+			acpi_disable_pci();
+		}
+		/* "acpi=noirq" disables ACPI interrupt routing */
+		else if (!memcmp(from, "acpi=noirq", 10)) {
+			acpi_noirq_set();
+		}
+
+		else if (!memcmp(from, "acpi_sci=edge", 13))
+			acpi_sci_flags.trigger =  1;
+
+		else if (!memcmp(from, "acpi_sci=level", 14))
+			acpi_sci_flags.trigger = 3;
+
+		else if (!memcmp(from, "acpi_sci=high", 13))
+			acpi_sci_flags.polarity = 1;
+
+		else if (!memcmp(from, "acpi_sci=low", 12))
+			acpi_sci_flags.polarity = 3;
+
+#ifdef CONFIG_X86_IO_APIC
+		else if (!memcmp(from, "acpi_skip_timer_override", 24))
+			acpi_skip_timer_override = 1;
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+		/* disable IO-APIC */
+		else if (!memcmp(from, "noapic", 6))
+			disable_ioapic_setup();
+#endif /* CONFIG_X86_LOCAL_APIC */
+#endif /* CONFIG_ACPI_BOOT */
+
+		/*
+		 * highmem=size forces highmem to be exactly 'size' bytes.
+		 * This works even on boxes that have no highmem otherwise.
+		 * This also works to reduce highmem size on bigger boxes.
+		 */
+		else if (!memcmp(from, "highmem=", 8))
+			highmem_pages = memparse(from+8, &from) >> PAGE_SHIFT;
+	
+		/*
+		 * vmalloc=size forces the vmalloc area to be exactly 'size'
+		 * bytes. This can be used to increase (or decrease) the
+		 * vmalloc area - the default is 128m.
+		 */
+		else if (!memcmp(from, "vmalloc=", 8))
+			__VMALLOC_RESERVE = memparse(from+8, &from);
+
+	next_char:
+		c = *(from++);
+		if (!c)
+			break;
+		if (COMMAND_LINE_SIZE <= ++len)
+			break;
+		*(to++) = c;
+	}
+	*to = '\0';
+	*cmdline_p = command_line;
+	if (userdef) {
+		printk(KERN_INFO "user-defined physical RAM map:\n");
+		print_memory_map("user");
+	}
+}
+
+/*
+ * Callback for efi_memory_walk.
+ */
+static int __init
+efi_find_max_pfn(unsigned long start, unsigned long end, void *arg)
+{
+	unsigned long *max_pfn = arg, pfn;
+
+	if (start < end) {
+		pfn = PFN_UP(end -1);
+		if (pfn > *max_pfn)
+			*max_pfn = pfn;
+	}
+	return 0;
+}
+
+
+/*
+ * Find the highest page frame number we have available
+ */
+void __init find_max_pfn(void)
+{
+	int i;
+
+	max_pfn = 0;
+	if (efi_enabled) {
+		efi_memmap_walk(efi_find_max_pfn, &max_pfn);
+		return;
+	}
+
+	for (i = 0; i < e820.nr_map; i++) {
+		unsigned long start, end;
+		/* RAM? */
+		if (e820.map[i].type != E820_RAM)
+			continue;
+		start = PFN_UP(e820.map[i].addr);
+		end = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
+		if (start >= end)
+			continue;
+		if (end > max_pfn)
+			max_pfn = end;
+	}
+}
+
+/*
+ * Determine low and high memory ranges:
+ */
+unsigned long __init find_max_low_pfn(void)
+{
+	unsigned long max_low_pfn;
+
+	max_low_pfn = max_pfn;
+	if (max_low_pfn > MAXMEM_PFN) {
+		if (highmem_pages == -1)
+			highmem_pages = max_pfn - MAXMEM_PFN;
+		if (highmem_pages + MAXMEM_PFN < max_pfn)
+			max_pfn = MAXMEM_PFN + highmem_pages;
+		if (highmem_pages + MAXMEM_PFN > max_pfn) {
+			printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
+			highmem_pages = 0;
+		}
+		max_low_pfn = MAXMEM_PFN;
+#ifndef CONFIG_HIGHMEM
+		/* Maximum memory usable is what is directly addressable */
+		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
+					MAXMEM>>20);
+		if (max_pfn > MAX_NONPAE_PFN)
+			printk(KERN_WARNING "Use a PAE enabled kernel.\n");
+		else
+			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+		max_pfn = MAXMEM_PFN;
+#else /* !CONFIG_HIGHMEM */
+#ifndef CONFIG_X86_PAE
+		if (max_pfn > MAX_NONPAE_PFN) {
+			max_pfn = MAX_NONPAE_PFN;
+			printk(KERN_WARNING "Warning only 4GB will be used.\n");
+			printk(KERN_WARNING "Use a PAE enabled kernel.\n");
+		}
+#endif /* !CONFIG_X86_PAE */
+#endif /* !CONFIG_HIGHMEM */
+	} else {
+		if (highmem_pages == -1)
+			highmem_pages = 0;
+#ifdef CONFIG_HIGHMEM
+		if (highmem_pages >= max_pfn) {
+			printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
+			highmem_pages = 0;
+		}
+		if (highmem_pages) {
+			if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
+				printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
+				highmem_pages = 0;
+			}
+			max_low_pfn -= highmem_pages;
+		}
+#else
+		if (highmem_pages)
+			printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
+#endif
+	}
+	return max_low_pfn;
+}
+
+/*
+ * Free all available memory for boot time allocation.  Used
+ * as a callback function by efi_memory_walk()
+ */
+
+static int __init
+free_available_memory(unsigned long start, unsigned long end, void *arg)
+{
+	/* check max_low_pfn */
+	if (start >= ((max_low_pfn + 1) << PAGE_SHIFT))
+		return 0;
+	if (end >= ((max_low_pfn + 1) << PAGE_SHIFT))
+		end = (max_low_pfn + 1) << PAGE_SHIFT;
+	if (start < end)
+		free_bootmem(start, end - start);
+
+	return 0;
+}
+/*
+ * Register fully available low RAM pages with the bootmem allocator.
+ */
+static void __init register_bootmem_low_pages(unsigned long max_low_pfn)
+{
+	int i;
+
+	if (efi_enabled) {
+		efi_memmap_walk(free_available_memory, NULL);
+		return;
+	}
+	for (i = 0; i < e820.nr_map; i++) {
+		unsigned long curr_pfn, last_pfn, size;
+		/*
+		 * Reserve usable low memory
+		 */
+		if (e820.map[i].type != E820_RAM)
+			continue;
+		/*
+		 * We are rounding up the start address of usable memory:
+		 */
+		curr_pfn = PFN_UP(e820.map[i].addr);
+		if (curr_pfn >= max_low_pfn)
+			continue;
+		/*
+		 * ... and at the end of the usable range downwards:
+		 */
+		last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
+
+		if (last_pfn > max_low_pfn)
+			last_pfn = max_low_pfn;
+
+		/*
+		 * .. finally, did all the rounding and playing
+		 * around just make the area go away?
+		 */
+		if (last_pfn <= curr_pfn)
+			continue;
+
+		size = last_pfn - curr_pfn;
+		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+	}
+}
+
+/*
+ * workaround for Dell systems that neglect to reserve EBDA
+ */
+static void __init reserve_ebda_region(void)
+{
+	unsigned int addr;
+	addr = get_bios_ebda();
+	if (addr)
+		reserve_bootmem(addr, PAGE_SIZE);	
+}
+
+#ifndef CONFIG_DISCONTIGMEM
+void __init setup_bootmem_allocator(void);
+static unsigned long __init setup_memory(void)
+{
+	/*
+	 * partially used pages are not usable - thus
+	 * we are rounding upwards:
+	 */
+	min_low_pfn = PFN_UP(init_pg_tables_end);
+
+	find_max_pfn();
+
+	max_low_pfn = find_max_low_pfn();
+
+#ifdef CONFIG_HIGHMEM
+	highstart_pfn = highend_pfn = max_pfn;
+	if (max_pfn > max_low_pfn) {
+		highstart_pfn = max_low_pfn;
+	}
+	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+		pages_to_mb(highend_pfn - highstart_pfn));
+#endif
+	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+			pages_to_mb(max_low_pfn));
+
+	setup_bootmem_allocator();
+
+	return max_low_pfn;
+}
+
+void __init zone_sizes_init(void)
+{
+	unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+	unsigned int max_dma, low;
+
+	max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+	low = max_low_pfn;
+
+	if (low < max_dma)
+		zones_size[ZONE_DMA] = low;
+	else {
+		zones_size[ZONE_DMA] = max_dma;
+		zones_size[ZONE_NORMAL] = low - max_dma;
+#ifdef CONFIG_HIGHMEM
+		zones_size[ZONE_HIGHMEM] = highend_pfn - low;
+#endif
+	}
+	free_area_init(zones_size);
+}
+#else
+extern unsigned long setup_memory(void);
+extern void zone_sizes_init(void);
+#endif /* !CONFIG_DISCONTIGMEM */
+
+void __init setup_bootmem_allocator(void)
+{
+	unsigned long bootmap_size;
+	/*
+	 * Initialize the boot-time allocator (with low memory only):
+	 */
+	bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
+
+	register_bootmem_low_pages(max_low_pfn);
+
+	/*
+	 * Reserve the bootmem bitmap itself as well. We do this in two
+	 * steps (first step was init_bootmem()) because this catches
+	 * the (very unlikely) case of us accidentally initializing the
+	 * bootmem allocator with an invalid RAM area.
+	 */
+	reserve_bootmem(HIGH_MEMORY, (PFN_PHYS(min_low_pfn) +
+			 bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY));
+
+	/*
+	 * reserve physical page 0 - it's a special BIOS page on many boxes,
+	 * enabling clean reboots, SMP operation, laptop functions.
+	 */
+	reserve_bootmem(0, PAGE_SIZE);
+
+	/* reserve EBDA region, it's a 4K region */
+	reserve_ebda_region();
+
+    /* could be an AMD 768MPX chipset. Reserve a page  before VGA to prevent
+       PCI prefetch into it (errata #56). Usually the page is reserved anyways,
+       unless you have no PS/2 mouse plugged in. */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+	    boot_cpu_data.x86 == 6)
+	     reserve_bootmem(0xa0000 - 4096, 4096);
+
+#ifdef CONFIG_SMP
+	/*
+	 * But first pinch a few for the stack/trampoline stuff
+	 * FIXME: Don't need the extra page at 4K, but need to fix
+	 * trampoline before removing it. (see the GDT stuff)
+	 */
+	reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
+#endif
+#ifdef CONFIG_ACPI_SLEEP
+	/*
+	 * Reserve low memory region for sleep support.
+	 */
+	acpi_reserve_bootmem();
+#endif
+#ifdef CONFIG_X86_FIND_SMP_CONFIG
+	/*
+	 * Find and reserve possible boot-time SMP configuration:
+	 */
+	find_smp_config();
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (LOADER_TYPE && INITRD_START) {
+		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
+			reserve_bootmem(INITRD_START, INITRD_SIZE);
+			initrd_start =
+				INITRD_START ? INITRD_START + PAGE_OFFSET : 0;
+			initrd_end = initrd_start+INITRD_SIZE;
+		}
+		else {
+			printk(KERN_ERR "initrd extends beyond end of memory "
+			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+			    INITRD_START + INITRD_SIZE,
+			    max_low_pfn << PAGE_SHIFT);
+			initrd_start = 0;
+		}
+	}
+#endif
+}
+
+/*
+ * The node 0 pgdat is initialized before all of these because
+ * it's needed for bootmem.  node>0 pgdats have their virtual
+ * space allocated before the pagetables are in place to access
+ * them, so they can't be cleared then.
+ *
+ * This should all compile down to nothing when NUMA is off.
+ */
+void __init remapped_pgdat_init(void)
+{
+	int nid;
+
+	for_each_online_node(nid) {
+		if (nid != 0)
+			memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+	}
+}
+
+/*
+ * Request address space for all standard RAM and ROM resources
+ * and also for regions reported as reserved by the e820.
+ */
+static void __init
+legacy_init_iomem_resources(struct resource *code_resource, struct resource *data_resource)
+{
+	int i;
+
+	probe_roms();
+	for (i = 0; i < e820.nr_map; i++) {
+		struct resource *res;
+		if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
+			continue;
+		res = alloc_bootmem_low(sizeof(struct resource));
+		switch (e820.map[i].type) {
+		case E820_RAM:	res->name = "System RAM"; break;
+		case E820_ACPI:	res->name = "ACPI Tables"; break;
+		case E820_NVS:	res->name = "ACPI Non-volatile Storage"; break;
+		default:	res->name = "reserved";
+		}
+		res->start = e820.map[i].addr;
+		res->end = res->start + e820.map[i].size - 1;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		request_resource(&iomem_resource, res);
+		if (e820.map[i].type == E820_RAM) {
+			/*
+			 *  We don't know which RAM region contains kernel data,
+			 *  so we try it repeatedly and let the resource manager
+			 *  test it.
+			 */
+			request_resource(res, code_resource);
+			request_resource(res, data_resource);
+		}
+	}
+}
+
+/*
+ * Request address space for all standard resources
+ */
+static void __init register_memory(void)
+{
+	unsigned long gapstart, gapsize;
+	unsigned long long last;
+	int	      i;
+
+	if (efi_enabled)
+		efi_initialize_iomem_resources(&code_resource, &data_resource);
+	else
+		legacy_init_iomem_resources(&code_resource, &data_resource);
+
+	/* EFI systems may still have VGA */
+	request_resource(&iomem_resource, &video_ram_resource);
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+		request_resource(&ioport_resource, &standard_io_resources[i]);
+
+	/*
+	 * Search for the bigest gap in the low 32 bits of the e820
+	 * memory space.
+	 */
+	last = 0x100000000ull;
+	gapstart = 0x10000000;
+	gapsize = 0x400000;
+	i = e820.nr_map;
+	while (--i >= 0) {
+		unsigned long long start = e820.map[i].addr;
+		unsigned long long end = start + e820.map[i].size;
+
+		/*
+		 * Since "last" is at most 4GB, we know we'll
+		 * fit in 32 bits if this condition is true
+		 */
+		if (last > end) {
+			unsigned long gap = last - end;
+
+			if (gap > gapsize) {
+				gapsize = gap;
+				gapstart = end;
+			}
+		}
+		if (start < last)
+			last = start;
+	}
+
+	/*
+	 * Start allocating dynamic PCI memory a bit into the gap,
+	 * aligned up to the nearest megabyte.
+	 *
+	 * Question: should we try to pad it up a bit (do something
+	 * like " + (gapsize >> 3)" in there too?). We now have the
+	 * technology.
+	 */
+	pci_mem_start = (gapstart + 0xfffff) & ~0xfffff;
+
+	printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n",
+		pci_mem_start, gapstart, gapsize);
+}
+
+/* Use inline assembly to define this because the nops are defined 
+   as inline assembly strings in the include files and we cannot 
+   get them easily into strings. */
+asm("\t.data\nintelnops: " 
+    GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
+    GENERIC_NOP7 GENERIC_NOP8); 
+asm("\t.data\nk8nops: " 
+    K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
+    K8_NOP7 K8_NOP8); 
+asm("\t.data\nk7nops: " 
+    K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
+    K7_NOP7 K7_NOP8); 
+    
+extern unsigned char intelnops[], k8nops[], k7nops[];
+static unsigned char *intel_nops[ASM_NOP_MAX+1] = { 
+     NULL,
+     intelnops,
+     intelnops + 1,
+     intelnops + 1 + 2,
+     intelnops + 1 + 2 + 3,
+     intelnops + 1 + 2 + 3 + 4,
+     intelnops + 1 + 2 + 3 + 4 + 5,
+     intelnops + 1 + 2 + 3 + 4 + 5 + 6,
+     intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+}; 
+static unsigned char *k8_nops[ASM_NOP_MAX+1] = { 
+     NULL,
+     k8nops,
+     k8nops + 1,
+     k8nops + 1 + 2,
+     k8nops + 1 + 2 + 3,
+     k8nops + 1 + 2 + 3 + 4,
+     k8nops + 1 + 2 + 3 + 4 + 5,
+     k8nops + 1 + 2 + 3 + 4 + 5 + 6,
+     k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+}; 
+static unsigned char *k7_nops[ASM_NOP_MAX+1] = { 
+     NULL,
+     k7nops,
+     k7nops + 1,
+     k7nops + 1 + 2,
+     k7nops + 1 + 2 + 3,
+     k7nops + 1 + 2 + 3 + 4,
+     k7nops + 1 + 2 + 3 + 4 + 5,
+     k7nops + 1 + 2 + 3 + 4 + 5 + 6,
+     k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+}; 
+static struct nop { 
+     int cpuid; 
+     unsigned char **noptable; 
+} noptypes[] = { 
+     { X86_FEATURE_K8, k8_nops }, 
+     { X86_FEATURE_K7, k7_nops }, 
+     { -1, NULL }
+}; 
+
+/* Replace instructions with better alternatives for this CPU type.
+
+   This runs before SMP is initialized to avoid SMP problems with
+   self modifying code. This implies that assymetric systems where
+   APs have less capabilities than the boot processor are not handled. 
+   In this case boot with "noreplacement". */ 
+void apply_alternatives(void *start, void *end) 
+{ 
+	struct alt_instr *a; 
+	int diff, i, k;
+        unsigned char **noptable = intel_nops; 
+	for (i = 0; noptypes[i].cpuid >= 0; i++) { 
+		if (boot_cpu_has(noptypes[i].cpuid)) { 
+			noptable = noptypes[i].noptable;
+			break;
+		}
+	} 
+	for (a = start; (void *)a < end; a++) { 
+		if (!boot_cpu_has(a->cpuid))
+			continue;
+		BUG_ON(a->replacementlen > a->instrlen); 
+		memcpy(a->instr, a->replacement, a->replacementlen); 
+		diff = a->instrlen - a->replacementlen; 
+		/* Pad the rest with nops */
+		for (i = a->replacementlen; diff > 0; diff -= k, i += k) {
+			k = diff;
+			if (k > ASM_NOP_MAX)
+				k = ASM_NOP_MAX;
+			memcpy(a->instr + i, noptable[k], k); 
+		} 
+	}
+} 
+
+static int no_replacement __initdata = 0; 
+ 
+void __init alternative_instructions(void)
+{
+	extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
+	if (no_replacement) 
+		return;
+	apply_alternatives(__alt_instructions, __alt_instructions_end);
+}
+
+static int __init noreplacement_setup(char *s)
+{ 
+     no_replacement = 1; 
+     return 0; 
+} 
+
+__setup("noreplacement", noreplacement_setup); 
+
+static char * __init machine_specific_memory_setup(void);
+
+#ifdef CONFIG_MCA
+static void set_mca_bus(int x)
+{
+	MCA_bus = x;
+}
+#else
+static void set_mca_bus(int x) { }
+#endif
+
+/*
+ * Determine if we were loaded by an EFI loader.  If so, then we have also been
+ * passed the efi memmap, systab, etc., so we should use these data structures
+ * for initialization.  Note, the efi init code path is determined by the
+ * global efi_enabled. This allows the same kernel image to be used on existing
+ * systems (with a traditional BIOS) as well as on EFI systems.
+ */
+void __init setup_arch(char **cmdline_p)
+{
+	unsigned long max_low_pfn;
+
+	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
+	pre_setup_arch_hook();
+	early_cpu_init();
+
+	/*
+	 * FIXME: This isn't an official loader_type right
+	 * now but does currently work with elilo.
+	 * If we were configured as an EFI kernel, check to make
+	 * sure that we were loaded correctly from elilo and that
+	 * the system table is valid.  If not, then initialize normally.
+	 */
+#ifdef CONFIG_EFI
+	if ((LOADER_TYPE == 0x50) && EFI_SYSTAB)
+		efi_enabled = 1;
+#endif
+
+ 	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+ 	drive_info = DRIVE_INFO;
+ 	screen_info = SCREEN_INFO;
+	edid_info = EDID_INFO;
+	apm_info.bios = APM_BIOS_INFO;
+	ist_info = IST_INFO;
+	saved_videomode = VIDEO_MODE;
+	if( SYS_DESC_TABLE.length != 0 ) {
+		set_mca_bus(SYS_DESC_TABLE.table[3] & 0x2);
+		machine_id = SYS_DESC_TABLE.table[0];
+		machine_submodel_id = SYS_DESC_TABLE.table[1];
+		BIOS_revision = SYS_DESC_TABLE.table[2];
+	}
+	bootloader_type = LOADER_TYPE;
+
+#ifdef CONFIG_BLK_DEV_RAM
+	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+	ARCH_SETUP
+	if (efi_enabled)
+		efi_init();
+	else {
+		printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+		print_memory_map(machine_specific_memory_setup());
+	}
+
+	copy_edd();
+
+	if (!MOUNT_ROOT_RDONLY)
+		root_mountflags &= ~MS_RDONLY;
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
+
+	code_resource.start = virt_to_phys(_text);
+	code_resource.end = virt_to_phys(_etext)-1;
+	data_resource.start = virt_to_phys(_etext);
+	data_resource.end = virt_to_phys(_edata)-1;
+
+	parse_cmdline_early(cmdline_p);
+
+	max_low_pfn = setup_memory();
+
+	/*
+	 * NOTE: before this point _nobody_ is allowed to allocate
+	 * any memory using the bootmem allocator.  Although the
+	 * alloctor is now initialised only the first 8Mb of the kernel
+	 * virtual address space has been mapped.  All allocations before
+	 * paging_init() has completed must use the alloc_bootmem_low_pages()
+	 * variant (which allocates DMA'able memory) and care must be taken
+	 * not to exceed the 8Mb limit.
+	 */
+
+#ifdef CONFIG_SMP
+	smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
+#endif
+	paging_init();
+	remapped_pgdat_init();
+	zone_sizes_init();
+
+	/*
+	 * NOTE: at this point the bootmem allocator is fully available.
+	 */
+
+#ifdef CONFIG_EARLY_PRINTK
+	{
+		char *s = strstr(*cmdline_p, "earlyprintk=");
+		if (s) {
+			extern void setup_early_printk(char *);
+
+			setup_early_printk(s);
+			printk("early console enabled\n");
+		}
+	}
+#endif
+
+
+	dmi_scan_machine();
+
+#ifdef CONFIG_X86_GENERICARCH
+	generic_apic_probe(*cmdline_p);
+#endif	
+	if (efi_enabled)
+		efi_map_memmap();
+
+	/*
+	 * Parse the ACPI tables for possible boot-time SMP configuration.
+	 */
+	acpi_boot_table_init();
+	acpi_boot_init();
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (smp_found_config)
+		get_smp_config();
+#endif
+
+	register_memory();
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+		conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+}
+
+#include "setup_arch_post.h"
+/*
+ * Local Variables:
+ * mode:c
+ * c-file-style:"k&r"
+ * c-basic-offset:8
+ * End:
+ */
diff --git a/arch/i386/kernel/sigframe.h b/arch/i386/kernel/sigframe.h
new file mode 100644
index 000000000000..d21b14f5c25c
--- /dev/null
+++ b/arch/i386/kernel/sigframe.h
@@ -0,0 +1,21 @@
+struct sigframe
+{
+	char *pretcode;
+	int sig;
+	struct sigcontext sc;
+	struct _fpstate fpstate;
+	unsigned long extramask[_NSIG_WORDS-1];
+	char retcode[8];
+};
+
+struct rt_sigframe
+{
+	char *pretcode;
+	int sig;
+	struct siginfo *pinfo;
+	void *puc;
+	struct siginfo info;
+	struct ucontext uc;
+	struct _fpstate fpstate;
+	char retcode[8];
+};
diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c
new file mode 100644
index 000000000000..ef3602e1c052
--- /dev/null
+++ b/arch/i386/kernel/signal.c
@@ -0,0 +1,665 @@
+/*
+ *  linux/arch/i386/kernel/signal.c
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ *  1997-11-28  Modified for POSIX.1b signals by Richard Henderson
+ *  2000-06-20  Pentium III FXSR, SSE support by Gareth Hughes
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/i387.h>
+#include "sigframe.h"
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage int
+sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+	struct pt_regs * regs = (struct pt_regs *) &history0;
+	sigset_t saveset;
+
+	mask &= _BLOCKABLE;
+	spin_lock_irq(&current->sighand->siglock);
+	saveset = current->blocked;
+	siginitset(&current->blocked, mask);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs->eax = -EINTR;
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+		if (do_signal(regs, &saveset))
+			return -EINTR;
+	}
+}
+
+asmlinkage int
+sys_rt_sigsuspend(struct pt_regs regs)
+{
+	sigset_t saveset, newset;
+
+	/* XXX: Don't preclude handling different sized sigset_t's.  */
+	if (regs.ecx != sizeof(sigset_t))
+		return -EINVAL;
+
+	if (copy_from_user(&newset, (sigset_t __user *)regs.ebx, sizeof(newset)))
+		return -EFAULT;
+	sigdelsetmask(&newset, ~_BLOCKABLE);
+
+	spin_lock_irq(&current->sighand->siglock);
+	saveset = current->blocked;
+	current->blocked = newset;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs.eax = -EINTR;
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+		if (do_signal(&regs, &saveset))
+			return -EINTR;
+	}
+}
+
+asmlinkage int 
+sys_sigaction(int sig, const struct old_sigaction __user *act,
+	      struct old_sigaction __user *oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+
+	if (act) {
+		old_sigset_t mask;
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+			return -EFAULT;
+		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
+		__get_user(mask, &act->sa_mask);
+		siginitset(&new_ka.sa.sa_mask, mask);
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+	if (!ret && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+			return -EFAULT;
+		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+	}
+
+	return ret;
+}
+
+asmlinkage int
+sys_sigaltstack(unsigned long ebx)
+{
+	/* This is needed to make gcc realize it doesn't own the "struct pt_regs" */
+	struct pt_regs *regs = (struct pt_regs *)&ebx;
+	const stack_t __user *uss = (const stack_t __user *)ebx;
+	stack_t __user *uoss = (stack_t __user *)regs->ecx;
+
+	return do_sigaltstack(uss, uoss, regs->esp);
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax)
+{
+	unsigned int err = 0;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+#define COPY(x)		err |= __get_user(regs->x, &sc->x)
+
+#define COPY_SEG(seg)							\
+	{ unsigned short tmp;						\
+	  err |= __get_user(tmp, &sc->seg);				\
+	  regs->x##seg = tmp; }
+
+#define COPY_SEG_STRICT(seg)						\
+	{ unsigned short tmp;						\
+	  err |= __get_user(tmp, &sc->seg);				\
+	  regs->x##seg = tmp|3; }
+
+#define GET_SEG(seg)							\
+	{ unsigned short tmp;						\
+	  err |= __get_user(tmp, &sc->seg);				\
+	  loadsegment(seg,tmp); }
+
+#define	FIX_EFLAGS	(X86_EFLAGS_AC | X86_EFLAGS_OF | X86_EFLAGS_DF | \
+			 X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \
+			 X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF)
+
+	GET_SEG(gs);
+	GET_SEG(fs);
+	COPY_SEG(es);
+	COPY_SEG(ds);
+	COPY(edi);
+	COPY(esi);
+	COPY(ebp);
+	COPY(esp);
+	COPY(ebx);
+	COPY(edx);
+	COPY(ecx);
+	COPY(eip);
+	COPY_SEG_STRICT(cs);
+	COPY_SEG_STRICT(ss);
+	
+	{
+		unsigned int tmpflags;
+		err |= __get_user(tmpflags, &sc->eflags);
+		regs->eflags = (regs->eflags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+		regs->orig_eax = -1;		/* disable syscall checks */
+	}
+
+	{
+		struct _fpstate __user * buf;
+		err |= __get_user(buf, &sc->fpstate);
+		if (buf) {
+			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
+				goto badframe;
+			err |= restore_i387(buf);
+		} else {
+			struct task_struct *me = current;
+			if (used_math()) {
+				clear_fpu(me);
+				clear_used_math();
+			}
+		}
+	}
+
+	err |= __get_user(*peax, &sc->eax);
+	return err;
+
+badframe:
+	return 1;
+}
+
+asmlinkage int sys_sigreturn(unsigned long __unused)
+{
+	struct pt_regs *regs = (struct pt_regs *) &__unused;
+	struct sigframe __user *frame = (struct sigframe __user *)(regs->esp - 8);
+	sigset_t set;
+	int eax;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__get_user(set.sig[0], &frame->sc.oldmask)
+	    || (_NSIG_WORDS > 1
+		&& __copy_from_user(&set.sig[1], &frame->extramask,
+				    sizeof(frame->extramask))))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+	
+	if (restore_sigcontext(regs, &frame->sc, &eax))
+		goto badframe;
+	return eax;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}	
+
+asmlinkage int sys_rt_sigreturn(unsigned long __unused)
+{
+	struct pt_regs *regs = (struct pt_regs *) &__unused;
+	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->esp - 4);
+	sigset_t set;
+	int eax;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+	
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax))
+		goto badframe;
+
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->esp) == -EFAULT)
+		goto badframe;
+
+	return eax;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}	
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
+		 struct pt_regs *regs, unsigned long mask)
+{
+	int tmp, err = 0;
+
+	tmp = 0;
+	__asm__("movl %%gs,%0" : "=r"(tmp): "0"(tmp));
+	err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
+	__asm__("movl %%fs,%0" : "=r"(tmp): "0"(tmp));
+	err |= __put_user(tmp, (unsigned int __user *)&sc->fs);
+
+	err |= __put_user(regs->xes, (unsigned int __user *)&sc->es);
+	err |= __put_user(regs->xds, (unsigned int __user *)&sc->ds);
+	err |= __put_user(regs->edi, &sc->edi);
+	err |= __put_user(regs->esi, &sc->esi);
+	err |= __put_user(regs->ebp, &sc->ebp);
+	err |= __put_user(regs->esp, &sc->esp);
+	err |= __put_user(regs->ebx, &sc->ebx);
+	err |= __put_user(regs->edx, &sc->edx);
+	err |= __put_user(regs->ecx, &sc->ecx);
+	err |= __put_user(regs->eax, &sc->eax);
+	err |= __put_user(current->thread.trap_no, &sc->trapno);
+	err |= __put_user(current->thread.error_code, &sc->err);
+	err |= __put_user(regs->eip, &sc->eip);
+	err |= __put_user(regs->xcs, (unsigned int __user *)&sc->cs);
+	err |= __put_user(regs->eflags, &sc->eflags);
+	err |= __put_user(regs->esp, &sc->esp_at_signal);
+	err |= __put_user(regs->xss, (unsigned int __user *)&sc->ss);
+
+	tmp = save_i387(fpstate);
+	if (tmp < 0)
+	  err = 1;
+	else
+	  err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
+
+	/* non-iBCS2 extensions.. */
+	err |= __put_user(mask, &sc->oldmask);
+	err |= __put_user(current->thread.cr2, &sc->cr2);
+
+	return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+{
+	unsigned long esp;
+
+	/* Default to using normal stack */
+	esp = regs->esp;
+
+	/* This is the X/Open sanctioned signal stack switching.  */
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		if (sas_ss_flags(esp) == 0)
+			esp = current->sas_ss_sp + current->sas_ss_size;
+	}
+
+	/* This is the legacy signal stack switching. */
+	else if ((regs->xss & 0xffff) != __USER_DS &&
+		 !(ka->sa.sa_flags & SA_RESTORER) &&
+		 ka->sa.sa_restorer) {
+		esp = (unsigned long) ka->sa.sa_restorer;
+	}
+
+	return (void __user *)((esp - frame_size) & -8ul);
+}
+
+/* These symbols are defined with the addresses in the vsyscall page.
+   See vsyscall-sigreturn.S.  */
+extern void __user __kernel_sigreturn;
+extern void __user __kernel_rt_sigreturn;
+
+static void setup_frame(int sig, struct k_sigaction *ka,
+			sigset_t *set, struct pt_regs * regs)
+{
+	void __user *restorer;
+	struct sigframe __user *frame;
+	int err = 0;
+	int usig;
+
+	frame = get_sigframe(ka, regs, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	usig = current_thread_info()->exec_domain
+		&& current_thread_info()->exec_domain->signal_invmap
+		&& sig < 32
+		? current_thread_info()->exec_domain->signal_invmap[sig]
+		: sig;
+
+	err = __put_user(usig, &frame->sig);
+	if (err)
+		goto give_sigsegv;
+
+	err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]);
+	if (err)
+		goto give_sigsegv;
+
+	if (_NSIG_WORDS > 1) {
+		err = __copy_to_user(&frame->extramask, &set->sig[1],
+				      sizeof(frame->extramask));
+		if (err)
+			goto give_sigsegv;
+	}
+
+	restorer = &__kernel_sigreturn;
+	if (ka->sa.sa_flags & SA_RESTORER)
+		restorer = ka->sa.sa_restorer;
+
+	/* Set up to return from userspace.  */
+	err |= __put_user(restorer, &frame->pretcode);
+	 
+	/*
+	 * This is popl %eax ; movl $,%eax ; int $0x80
+	 *
+	 * WE DO NOT USE IT ANY MORE! It's only left here for historical
+	 * reasons and because gdb uses it as a signature to notice
+	 * signal handler stack frames.
+	 */
+	err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
+	err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
+	err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
+
+	if (err)
+		goto give_sigsegv;
+
+	/* Set up registers for signal handler */
+	regs->esp = (unsigned long) frame;
+	regs->eip = (unsigned long) ka->sa.sa_handler;
+	regs->eax = (unsigned long) sig;
+	regs->edx = (unsigned long) 0;
+	regs->ecx = (unsigned long) 0;
+
+	set_fs(USER_DS);
+	regs->xds = __USER_DS;
+	regs->xes = __USER_DS;
+	regs->xss = __USER_DS;
+	regs->xcs = __USER_CS;
+
+	/*
+	 * Clear TF when entering the signal handler, but
+	 * notify any tracer that was single-stepping it.
+	 * The tracer may want to single-step inside the
+	 * handler too.
+	 */
+	regs->eflags &= ~TF_MASK;
+	if (test_thread_flag(TIF_SINGLESTEP))
+		ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
+		current->comm, current->pid, frame, regs->eip, frame->pretcode);
+#endif
+
+	return;
+
+give_sigsegv:
+	force_sigsegv(sig, current);
+}
+
+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			   sigset_t *set, struct pt_regs * regs)
+{
+	void __user *restorer;
+	struct rt_sigframe __user *frame;
+	int err = 0;
+	int usig;
+
+	frame = get_sigframe(ka, regs, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	usig = current_thread_info()->exec_domain
+		&& current_thread_info()->exec_domain->signal_invmap
+		&& sig < 32
+		? current_thread_info()->exec_domain->signal_invmap[sig]
+		: sig;
+
+	err |= __put_user(usig, &frame->sig);
+	err |= __put_user(&frame->info, &frame->pinfo);
+	err |= __put_user(&frame->uc, &frame->puc);
+	err |= copy_siginfo_to_user(&frame->info, info);
+	if (err)
+		goto give_sigsegv;
+
+	/* Create the ucontext.  */
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(0, &frame->uc.uc_link);
+	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+	err |= __put_user(sas_ss_flags(regs->esp),
+			  &frame->uc.uc_stack.ss_flags);
+	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+			        regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+	if (err)
+		goto give_sigsegv;
+
+	/* Set up to return from userspace.  */
+	restorer = &__kernel_rt_sigreturn;
+	if (ka->sa.sa_flags & SA_RESTORER)
+		restorer = ka->sa.sa_restorer;
+	err |= __put_user(restorer, &frame->pretcode);
+	 
+	/*
+	 * This is movl $,%eax ; int $0x80
+	 *
+	 * WE DO NOT USE IT ANY MORE! It's only left here for historical
+	 * reasons and because gdb uses it as a signature to notice
+	 * signal handler stack frames.
+	 */
+	err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
+	err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
+	err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
+
+	if (err)
+		goto give_sigsegv;
+
+	/* Set up registers for signal handler */
+	regs->esp = (unsigned long) frame;
+	regs->eip = (unsigned long) ka->sa.sa_handler;
+	regs->eax = (unsigned long) usig;
+	regs->edx = (unsigned long) &frame->info;
+	regs->ecx = (unsigned long) &frame->uc;
+
+	set_fs(USER_DS);
+	regs->xds = __USER_DS;
+	regs->xes = __USER_DS;
+	regs->xss = __USER_DS;
+	regs->xcs = __USER_CS;
+
+	/*
+	 * Clear TF when entering the signal handler, but
+	 * notify any tracer that was single-stepping it.
+	 * The tracer may want to single-step inside the
+	 * handler too.
+	 */
+	regs->eflags &= ~TF_MASK;
+	if (test_thread_flag(TIF_SINGLESTEP))
+		ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
+		current->comm, current->pid, frame, regs->eip, frame->pretcode);
+#endif
+
+	return;
+
+give_sigsegv:
+	force_sigsegv(sig, current);
+}
+
+/*
+ * OK, we're invoking a handler
+ */	
+
+static void
+handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
+	      sigset_t *oldset,	struct pt_regs * regs)
+{
+	/* Are we from a system call? */
+	if (regs->orig_eax >= 0) {
+		/* If so, check system call restarting.. */
+		switch (regs->eax) {
+		        case -ERESTART_RESTARTBLOCK:
+			case -ERESTARTNOHAND:
+				regs->eax = -EINTR;
+				break;
+
+			case -ERESTARTSYS:
+				if (!(ka->sa.sa_flags & SA_RESTART)) {
+					regs->eax = -EINTR;
+					break;
+				}
+			/* fallthrough */
+			case -ERESTARTNOINTR:
+				regs->eax = regs->orig_eax;
+				regs->eip -= 2;
+		}
+	}
+
+	/*
+	 * If TF is set due to a debugger (PT_DTRACE), clear the TF flag so
+	 * that register information in the sigcontext is correct.
+	 */
+	if (unlikely(regs->eflags & TF_MASK)
+	    && likely(current->ptrace & PT_DTRACE)) {
+		current->ptrace &= ~PT_DTRACE;
+		regs->eflags &= ~TF_MASK;
+	}
+
+	/* Set up the stack frame */
+	if (ka->sa.sa_flags & SA_SIGINFO)
+		setup_rt_frame(sig, ka, info, oldset, regs);
+	else
+		setup_frame(sig, ka, oldset, regs);
+
+	if (!(ka->sa.sa_flags & SA_NODEFER)) {
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
+		sigaddset(&current->blocked,sig);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+int fastcall do_signal(struct pt_regs *regs, sigset_t *oldset)
+{
+	siginfo_t info;
+	int signr;
+	struct k_sigaction ka;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if ((regs->xcs & 3) != 3)
+		return 1;
+
+	if (current->flags & PF_FREEZE) {
+		refrigerator(0);
+		goto no_signal;
+	}
+
+	if (!oldset)
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+	if (signr > 0) {
+		/* Reenable any watchpoints before delivering the
+		 * signal to user space. The processor register will
+		 * have been cleared if the watchpoint triggered
+		 * inside the kernel.
+		 */
+		if (unlikely(current->thread.debugreg[7])) {
+			__asm__("movl %0,%%db7"	: : "r" (current->thread.debugreg[7]));
+		}
+
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(signr, &info, &ka, oldset, regs);
+		return 1;
+	}
+
+ no_signal:
+	/* Did we come from a system call? */
+	if (regs->orig_eax >= 0) {
+		/* Restart the system call - no handlers present */
+		if (regs->eax == -ERESTARTNOHAND ||
+		    regs->eax == -ERESTARTSYS ||
+		    regs->eax == -ERESTARTNOINTR) {
+			regs->eax = regs->orig_eax;
+			regs->eip -= 2;
+		}
+		if (regs->eax == -ERESTART_RESTARTBLOCK){
+			regs->eax = __NR_restart_syscall;
+			regs->eip -= 2;
+		}
+	}
+	return 0;
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by current->work.notify_resume
+ */
+__attribute__((regparm(3)))
+void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
+		      __u32 thread_info_flags)
+{
+	/* Pending single-step? */
+	if (thread_info_flags & _TIF_SINGLESTEP) {
+		regs->eflags |= TF_MASK;
+		clear_thread_flag(TIF_SINGLESTEP);
+	}
+	/* deal with pending signal delivery */
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal(regs,oldset);
+	
+	clear_thread_flag(TIF_IRET);
+}
diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c
new file mode 100644
index 000000000000..6223c33ac91c
--- /dev/null
+++ b/arch/i386/kernel/smp.c
@@ -0,0 +1,612 @@
+/*
+ *	Intel SMP support routines.
+ *
+ *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ *	(c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ *	This code is released under the GNU General Public License version 2 or
+ *	later.
+ */
+
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>
+#include <mach_apic.h>
+
+/*
+ *	Some notes on x86 processor bugs affecting SMP operation:
+ *
+ *	Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
+ *	The Linux implications for SMP are handled as follows:
+ *
+ *	Pentium III / [Xeon]
+ *		None of the E1AP-E3AP errata are visible to the user.
+ *
+ *	E1AP.	see PII A1AP
+ *	E2AP.	see PII A2AP
+ *	E3AP.	see PII A3AP
+ *
+ *	Pentium II / [Xeon]
+ *		None of the A1AP-A3AP errata are visible to the user.
+ *
+ *	A1AP.	see PPro 1AP
+ *	A2AP.	see PPro 2AP
+ *	A3AP.	see PPro 7AP
+ *
+ *	Pentium Pro
+ *		None of 1AP-9AP errata are visible to the normal user,
+ *	except occasional delivery of 'spurious interrupt' as trap #15.
+ *	This is very rare and a non-problem.
+ *
+ *	1AP.	Linux maps APIC as non-cacheable
+ *	2AP.	worked around in hardware
+ *	3AP.	fixed in C0 and above steppings microcode update.
+ *		Linux does not use excessive STARTUP_IPIs.
+ *	4AP.	worked around in hardware
+ *	5AP.	symmetric IO mode (normal Linux operation) not affected.
+ *		'noapic' mode has vector 0xf filled out properly.
+ *	6AP.	'noapic' mode might be affected - fixed in later steppings
+ *	7AP.	We do not assume writes to the LVT deassering IRQs
+ *	8AP.	We do not enable low power mode (deep sleep) during MP bootup
+ *	9AP.	We do not use mixed mode
+ *
+ *	Pentium
+ *		There is a marginal case where REP MOVS on 100MHz SMP
+ *	machines with B stepping processors can fail. XXX should provide
+ *	an L1cache=Writethrough or L1cache=off option.
+ *
+ *		B stepping CPUs may hang. There are hardware work arounds
+ *	for this. We warn about it in case your board doesn't have the work
+ *	arounds. Basically thats so I can tell anyone with a B stepping
+ *	CPU and SMP problems "tough".
+ *
+ *	Specific items [From Pentium Processor Specification Update]
+ *
+ *	1AP.	Linux doesn't use remote read
+ *	2AP.	Linux doesn't trust APIC errors
+ *	3AP.	We work around this
+ *	4AP.	Linux never generated 3 interrupts of the same priority
+ *		to cause a lost local interrupt.
+ *	5AP.	Remote read is never used
+ *	6AP.	not affected - worked around in hardware
+ *	7AP.	not affected - worked around in hardware
+ *	8AP.	worked around in hardware - we get explicit CS errors if not
+ *	9AP.	only 'noapic' mode affected. Might generate spurious
+ *		interrupts, we log only the first one and count the
+ *		rest silently.
+ *	10AP.	not affected - worked around in hardware
+ *	11AP.	Linux reads the APIC between writes to avoid this, as per
+ *		the documentation. Make sure you preserve this as it affects
+ *		the C stepping chips too.
+ *	12AP.	not affected - worked around in hardware
+ *	13AP.	not affected - worked around in hardware
+ *	14AP.	we always deassert INIT during bootup
+ *	15AP.	not affected - worked around in hardware
+ *	16AP.	not affected - worked around in hardware
+ *	17AP.	not affected - worked around in hardware
+ *	18AP.	not affected - worked around in hardware
+ *	19AP.	not affected - worked around in BIOS
+ *
+ *	If this sounds worrying believe me these bugs are either ___RARE___,
+ *	or are signal timing bugs worked around in hardware and there's
+ *	about nothing of note with C stepping upwards.
+ */
+
+DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0, };
+
+/*
+ * the following functions deal with sending IPIs between CPUs.
+ *
+ * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
+ */
+
+static inline int __prepare_ICR (unsigned int shortcut, int vector)
+{
+	return APIC_DM_FIXED | shortcut | vector | APIC_DEST_LOGICAL;
+}
+
+static inline int __prepare_ICR2 (unsigned int mask)
+{
+	return SET_APIC_DEST_FIELD(mask);
+}
+
+void __send_IPI_shortcut(unsigned int shortcut, int vector)
+{
+	/*
+	 * Subtle. In the case of the 'never do double writes' workaround
+	 * we have to lock out interrupts to be safe.  As we don't care
+	 * of the value read we use an atomic rmw access to avoid costly
+	 * cli/sti.  Otherwise we use an even cheaper single atomic write
+	 * to the APIC.
+	 */
+	unsigned int cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+
+	/*
+	 * No need to touch the target chip field
+	 */
+	cfg = __prepare_ICR(shortcut, vector);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	apic_write_around(APIC_ICR, cfg);
+}
+
+void fastcall send_IPI_self(int vector)
+{
+	__send_IPI_shortcut(APIC_DEST_SELF, vector);
+}
+
+/*
+ * This is only used on smaller machines.
+ */
+void send_IPI_mask_bitmask(cpumask_t cpumask, int vector)
+{
+	unsigned long mask = cpus_addr(cpumask)[0];
+	unsigned long cfg;
+	unsigned long flags;
+
+	local_irq_save(flags);
+		
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+		
+	/*
+	 * prepare target chip field
+	 */
+	cfg = __prepare_ICR2(mask);
+	apic_write_around(APIC_ICR2, cfg);
+		
+	/*
+	 * program the ICR 
+	 */
+	cfg = __prepare_ICR(0, vector);
+			
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	apic_write_around(APIC_ICR, cfg);
+
+	local_irq_restore(flags);
+}
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector)
+{
+	unsigned long cfg, flags;
+	unsigned int query_cpu;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send 
+	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This 
+	 * should be modified to do 1 message per cluster ID - mbligh
+	 */ 
+
+	local_irq_save(flags);
+
+	for (query_cpu = 0; query_cpu < NR_CPUS; ++query_cpu) {
+		if (cpu_isset(query_cpu, mask)) {
+		
+			/*
+			 * Wait for idle.
+			 */
+			apic_wait_icr_idle();
+		
+			/*
+			 * prepare target chip field
+			 */
+			cfg = __prepare_ICR2(cpu_to_logical_apicid(query_cpu));
+			apic_write_around(APIC_ICR2, cfg);
+		
+			/*
+			 * program the ICR 
+			 */
+			cfg = __prepare_ICR(0, vector);
+			
+			/*
+			 * Send the IPI. The write to APIC_ICR fires this off.
+			 */
+			apic_write_around(APIC_ICR, cfg);
+		}
+	}
+	local_irq_restore(flags);
+}
+
+#include <mach_ipi.h> /* must come after the send_IPI functions above for inlining */
+
+/*
+ *	Smarter SMP flushing macros. 
+ *		c/o Linus Torvalds.
+ *
+ *	These mean you can really definitely utterly forget about
+ *	writing to user space from interrupts. (Its not allowed anyway).
+ *
+ *	Optimizations Manfred Spraul <manfred@colorfullife.com>
+ */
+
+static cpumask_t flush_cpumask;
+static struct mm_struct * flush_mm;
+static unsigned long flush_va;
+static DEFINE_SPINLOCK(tlbstate_lock);
+#define FLUSH_ALL	0xffffffff
+
+/*
+ * We cannot call mmdrop() because we are in interrupt context, 
+ * instead update mm->cpu_vm_mask.
+ *
+ * We need to reload %cr3 since the page tables may be going
+ * away from under us..
+ */
+static inline void leave_mm (unsigned long cpu)
+{
+	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
+		BUG();
+	cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
+	load_cr3(swapper_pg_dir);
+}
+
+/*
+ *
+ * The flush IPI assumes that a thread switch happens in this order:
+ * [cpu0: the cpu that switches]
+ * 1) switch_mm() either 1a) or 1b)
+ * 1a) thread switch to a different mm
+ * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
+ * 	Stop ipi delivery for the old mm. This is not synchronized with
+ * 	the other cpus, but smp_invalidate_interrupt ignore flush ipis
+ * 	for the wrong mm, and in the worst case we perform a superflous
+ * 	tlb flush.
+ * 1a2) set cpu_tlbstate to TLBSTATE_OK
+ * 	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
+ *	was in lazy tlb mode.
+ * 1a3) update cpu_tlbstate[].active_mm
+ * 	Now cpu0 accepts tlb flushes for the new mm.
+ * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
+ * 	Now the other cpus will send tlb flush ipis.
+ * 1a4) change cr3.
+ * 1b) thread switch without mm change
+ *	cpu_tlbstate[].active_mm is correct, cpu0 already handles
+ *	flush ipis.
+ * 1b1) set cpu_tlbstate to TLBSTATE_OK
+ * 1b2) test_and_set the cpu bit in cpu_vm_mask.
+ * 	Atomically set the bit [other cpus will start sending flush ipis],
+ * 	and test the bit.
+ * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
+ * 2) switch %%esp, ie current
+ *
+ * The interrupt must handle 2 special cases:
+ * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
+ * - the cpu performs speculative tlb reads, i.e. even if the cpu only
+ *   runs in kernel space, the cpu could load tlb entries for user space
+ *   pages.
+ *
+ * The good news is that cpu_tlbstate is local to each cpu, no
+ * write/read ordering problems.
+ */
+
+/*
+ * TLB flush IPI:
+ *
+ * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
+ * 2) Leave the mm if we are in the lazy tlb mode.
+ */
+
+fastcall void smp_invalidate_interrupt(struct pt_regs *regs)
+{
+	unsigned long cpu;
+
+	cpu = get_cpu();
+
+	if (!cpu_isset(cpu, flush_cpumask))
+		goto out;
+		/* 
+		 * This was a BUG() but until someone can quote me the
+		 * line from the intel manual that guarantees an IPI to
+		 * multiple CPUs is retried _only_ on the erroring CPUs
+		 * its staying as a return
+		 *
+		 * BUG();
+		 */
+		 
+	if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
+		if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
+			if (flush_va == FLUSH_ALL)
+				local_flush_tlb();
+			else
+				__flush_tlb_one(flush_va);
+		} else
+			leave_mm(cpu);
+	}
+	ack_APIC_irq();
+	smp_mb__before_clear_bit();
+	cpu_clear(cpu, flush_cpumask);
+	smp_mb__after_clear_bit();
+out:
+	put_cpu_no_resched();
+}
+
+static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
+						unsigned long va)
+{
+	cpumask_t tmp;
+	/*
+	 * A couple of (to be removed) sanity checks:
+	 *
+	 * - we do not send IPIs to not-yet booted CPUs.
+	 * - current CPU must not be in mask
+	 * - mask must exist :)
+	 */
+	BUG_ON(cpus_empty(cpumask));
+
+	cpus_and(tmp, cpumask, cpu_online_map);
+	BUG_ON(!cpus_equal(cpumask, tmp));
+	BUG_ON(cpu_isset(smp_processor_id(), cpumask));
+	BUG_ON(!mm);
+
+	/*
+	 * i'm not happy about this global shared spinlock in the
+	 * MM hot path, but we'll see how contended it is.
+	 * Temporarily this turns IRQs off, so that lockups are
+	 * detected by the NMI watchdog.
+	 */
+	spin_lock(&tlbstate_lock);
+	
+	flush_mm = mm;
+	flush_va = va;
+#if NR_CPUS <= BITS_PER_LONG
+	atomic_set_mask(cpumask, &flush_cpumask);
+#else
+	{
+		int k;
+		unsigned long *flush_mask = (unsigned long *)&flush_cpumask;
+		unsigned long *cpu_mask = (unsigned long *)&cpumask;
+		for (k = 0; k < BITS_TO_LONGS(NR_CPUS); ++k)
+			atomic_set_mask(cpu_mask[k], &flush_mask[k]);
+	}
+#endif
+	/*
+	 * We have to send the IPI only to
+	 * CPUs affected.
+	 */
+	send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR);
+
+	while (!cpus_empty(flush_cpumask))
+		/* nothing. lockup detection does not belong here */
+		mb();
+
+	flush_mm = NULL;
+	flush_va = 0;
+	spin_unlock(&tlbstate_lock);
+}
+	
+void flush_tlb_current_task(void)
+{
+	struct mm_struct *mm = current->mm;
+	cpumask_t cpu_mask;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	local_flush_tlb();
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+	preempt_enable();
+}
+
+void flush_tlb_mm (struct mm_struct * mm)
+{
+	cpumask_t cpu_mask;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	if (current->active_mm == mm) {
+		if (current->mm)
+			local_flush_tlb();
+		else
+			leave_mm(smp_processor_id());
+	}
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+
+	preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	cpumask_t cpu_mask;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	if (current->active_mm == mm) {
+		if(current->mm)
+			__flush_tlb_one(va);
+		 else
+		 	leave_mm(smp_processor_id());
+	}
+
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, va);
+
+	preempt_enable();
+}
+
+static void do_flush_tlb_all(void* info)
+{
+	unsigned long cpu = smp_processor_id();
+
+	__flush_tlb_all();
+	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
+		leave_mm(cpu);
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+}
+
+/*
+ * this function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+void smp_send_reschedule(int cpu)
+{
+	send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
+}
+
+/*
+ * Structure and data for smp_call_function(). This is designed to minimise
+ * static memory requirements. It also looks cleaner.
+ */
+static DEFINE_SPINLOCK(call_lock);
+
+struct call_data_struct {
+	void (*func) (void *info);
+	void *info;
+	atomic_t started;
+	atomic_t finished;
+	int wait;
+};
+
+static struct call_data_struct * call_data;
+
+/*
+ * this function sends a 'generic call function' IPI to all other CPUs
+ * in the system.
+ */
+
+int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
+			int wait)
+/*
+ * [SUMMARY] Run a function on all other CPUs.
+ * <func> The function to run. This must be fast and non-blocking.
+ * <info> An arbitrary pointer to pass to the function.
+ * <nonatomic> currently unused.
+ * <wait> If true, wait (atomically) until function has completed on other CPUs.
+ * [RETURNS] 0 on success, else a negative status code. Does not return until
+ * remote CPUs are nearly ready to execute <<func>> or are or have executed.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+{
+	struct call_data_struct data;
+	int cpus = num_online_cpus()-1;
+
+	if (!cpus)
+		return 0;
+
+	/* Can deadlock when called with interrupts disabled */
+	WARN_ON(irqs_disabled());
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	spin_lock(&call_lock);
+	call_data = &data;
+	mb();
+	
+	/* Send a message to all other CPUs and wait for them to respond */
+	send_IPI_allbutself(CALL_FUNCTION_VECTOR);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus)
+		cpu_relax();
+
+	if (wait)
+		while (atomic_read(&data.finished) != cpus)
+			cpu_relax();
+	spin_unlock(&call_lock);
+
+	return 0;
+}
+
+static void stop_this_cpu (void * dummy)
+{
+	/*
+	 * Remove this CPU:
+	 */
+	cpu_clear(smp_processor_id(), cpu_online_map);
+	local_irq_disable();
+	disable_local_APIC();
+	if (cpu_data[smp_processor_id()].hlt_works_ok)
+		for(;;) __asm__("hlt");
+	for (;;);
+}
+
+/*
+ * this function calls the 'stop' function on all other CPUs in the system.
+ */
+
+void smp_send_stop(void)
+{
+	smp_call_function(stop_this_cpu, NULL, 1, 0);
+
+	local_irq_disable();
+	disable_local_APIC();
+	local_irq_enable();
+}
+
+/*
+ * Reschedule call back. Nothing to do,
+ * all the work is done automatically when
+ * we return from the interrupt.
+ */
+fastcall void smp_reschedule_interrupt(struct pt_regs *regs)
+{
+	ack_APIC_irq();
+}
+
+fastcall void smp_call_function_interrupt(struct pt_regs *regs)
+{
+	void (*func) (void *info) = call_data->func;
+	void *info = call_data->info;
+	int wait = call_data->wait;
+
+	ack_APIC_irq();
+	/*
+	 * Notify initiating CPU that I've grabbed the data and am
+	 * about to execute the function
+	 */
+	mb();
+	atomic_inc(&call_data->started);
+	/*
+	 * At this point the info structure may be out of scope unless wait==1
+	 */
+	irq_enter();
+	(*func)(info);
+	irq_exit();
+
+	if (wait) {
+		mb();
+		atomic_inc(&call_data->finished);
+	}
+}
+
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
new file mode 100644
index 000000000000..332ee7a1d1a1
--- /dev/null
+++ b/arch/i386/kernel/smpboot.c
@@ -0,0 +1,1145 @@
+/*
+ *	x86 SMP booting functions
+ *
+ *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ *	Much of the core SMP work is based on previous work by Thomas Radke, to
+ *	whom a great many thanks are extended.
+ *
+ *	Thanks to Intel for making available several different Pentium,
+ *	Pentium Pro and Pentium-II/Xeon MP machines.
+ *	Original development of Linux SMP code supported by Caldera.
+ *
+ *	This code is released under the GNU General Public License version 2 or
+ *	later.
+ *
+ *	Fixes
+ *		Felix Koop	:	NR_CPUS used properly
+ *		Jose Renau	:	Handle single CPU case.
+ *		Alan Cox	:	By repeated request 8) - Total BogoMIPS report.
+ *		Greg Wright	:	Fix for kernel stacks panic.
+ *		Erich Boleyn	:	MP v1.4 and additional changes.
+ *	Matthias Sattler	:	Changes for 2.1 kernel map.
+ *	Michel Lespinasse	:	Changes for 2.1 kernel map.
+ *	Michael Chastain	:	Change trampoline.S to gnu as.
+ *		Alan Cox	:	Dumb bug: 'B' step PPro's are fine
+ *		Ingo Molnar	:	Added APIC timers, based on code
+ *					from Jose Renau
+ *		Ingo Molnar	:	various cleanups and rewrites
+ *		Tigran Aivazian	:	fixed "0.00 in /proc/uptime on SMP" bug.
+ *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs
+ *		Martin J. Bligh	: 	Added support for multi-quad systems
+ *		Dave Jones	:	Report invalid combinations of Athlon CPUs.
+*		Rusty Russell	:	Hacked into shape for new "hotplug" boot process. */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/smp_lock.h>
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+
+#include <linux/delay.h>
+#include <linux/mc146818rtc.h>
+#include <asm/tlbflush.h>
+#include <asm/desc.h>
+#include <asm/arch_hooks.h>
+
+#include <mach_apic.h>
+#include <mach_wakecpu.h>
+#include <smpboot_hooks.h>
+
+/* Set if we find a B stepping CPU */
+static int __initdata smp_b_stepping;
+
+/* Number of siblings per CPU package */
+int smp_num_siblings = 1;
+int phys_proc_id[NR_CPUS]; /* Package ID of each logical CPU */
+EXPORT_SYMBOL(phys_proc_id);
+
+/* bitmap of online cpus */
+cpumask_t cpu_online_map;
+
+cpumask_t cpu_callin_map;
+cpumask_t cpu_callout_map;
+static cpumask_t smp_commenced_mask;
+
+/* Per CPU bogomips and other parameters */
+struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
+
+u8 x86_cpu_to_apicid[NR_CPUS] =
+			{ [0 ... NR_CPUS-1] = 0xff };
+EXPORT_SYMBOL(x86_cpu_to_apicid);
+
+/*
+ * Trampoline 80x86 program as an array.
+ */
+
+extern unsigned char trampoline_data [];
+extern unsigned char trampoline_end  [];
+static unsigned char *trampoline_base;
+static int trampoline_exec;
+
+static void map_cpu_to_logical_apicid(void);
+
+/*
+ * Currently trivial. Write the real->protected mode
+ * bootstrap into the page concerned. The caller
+ * has made sure it's suitably aligned.
+ */
+
+static unsigned long __init setup_trampoline(void)
+{
+	memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data);
+	return virt_to_phys(trampoline_base);
+}
+
+/*
+ * We are called very early to get the low memory for the
+ * SMP bootup trampoline page.
+ */
+void __init smp_alloc_memory(void)
+{
+	trampoline_base = (void *) alloc_bootmem_low_pages(PAGE_SIZE);
+	/*
+	 * Has to be in very low memory so we can execute
+	 * real-mode AP code.
+	 */
+	if (__pa(trampoline_base) >= 0x9F000)
+		BUG();
+	/*
+	 * Make the SMP trampoline executable:
+	 */
+	trampoline_exec = set_kernel_exec((unsigned long)trampoline_base, 1);
+}
+
+/*
+ * The bootstrap kernel entry code has set these up. Save them for
+ * a given CPU
+ */
+
+static void __init smp_store_cpu_info(int id)
+{
+	struct cpuinfo_x86 *c = cpu_data + id;
+
+	*c = boot_cpu_data;
+	if (id!=0)
+		identify_cpu(c);
+	/*
+	 * Mask B, Pentium, but not Pentium MMX
+	 */
+	if (c->x86_vendor == X86_VENDOR_INTEL &&
+	    c->x86 == 5 &&
+	    c->x86_mask >= 1 && c->x86_mask <= 4 &&
+	    c->x86_model <= 3)
+		/*
+		 * Remember we have B step Pentia with bugs
+		 */
+		smp_b_stepping = 1;
+
+	/*
+	 * Certain Athlons might work (for various values of 'work') in SMP
+	 * but they are not certified as MP capable.
+	 */
+	if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
+
+		/* Athlon 660/661 is valid. */	
+		if ((c->x86_model==6) && ((c->x86_mask==0) || (c->x86_mask==1)))
+			goto valid_k7;
+
+		/* Duron 670 is valid */
+		if ((c->x86_model==7) && (c->x86_mask==0))
+			goto valid_k7;
+
+		/*
+		 * Athlon 662, Duron 671, and Athlon >model 7 have capability bit.
+		 * It's worth noting that the A5 stepping (662) of some Athlon XP's
+		 * have the MP bit set.
+		 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for more.
+		 */
+		if (((c->x86_model==6) && (c->x86_mask>=2)) ||
+		    ((c->x86_model==7) && (c->x86_mask>=1)) ||
+		     (c->x86_model> 7))
+			if (cpu_has_mp)
+				goto valid_k7;
+
+		/* If we get here, it's not a certified SMP capable AMD system. */
+		tainted |= TAINT_UNSAFE_SMP;
+	}
+
+valid_k7:
+	;
+}
+
+/*
+ * TSC synchronization.
+ *
+ * We first check whether all CPUs have their TSC's synchronized,
+ * then we print a warning if not, and always resync.
+ */
+
+static atomic_t tsc_start_flag = ATOMIC_INIT(0);
+static atomic_t tsc_count_start = ATOMIC_INIT(0);
+static atomic_t tsc_count_stop = ATOMIC_INIT(0);
+static unsigned long long tsc_values[NR_CPUS];
+
+#define NR_LOOPS 5
+
+static void __init synchronize_tsc_bp (void)
+{
+	int i;
+	unsigned long long t0;
+	unsigned long long sum, avg;
+	long long delta;
+	unsigned long one_usec;
+	int buggy = 0;
+
+	printk(KERN_INFO "checking TSC synchronization across %u CPUs: ", num_booting_cpus());
+
+	/* convert from kcyc/sec to cyc/usec */
+	one_usec = cpu_khz / 1000;
+
+	atomic_set(&tsc_start_flag, 1);
+	wmb();
+
+	/*
+	 * We loop a few times to get a primed instruction cache,
+	 * then the last pass is more or less synchronized and
+	 * the BP and APs set their cycle counters to zero all at
+	 * once. This reduces the chance of having random offsets
+	 * between the processors, and guarantees that the maximum
+	 * delay between the cycle counters is never bigger than
+	 * the latency of information-passing (cachelines) between
+	 * two CPUs.
+	 */
+	for (i = 0; i < NR_LOOPS; i++) {
+		/*
+		 * all APs synchronize but they loop on '== num_cpus'
+		 */
+		while (atomic_read(&tsc_count_start) != num_booting_cpus()-1)
+			mb();
+		atomic_set(&tsc_count_stop, 0);
+		wmb();
+		/*
+		 * this lets the APs save their current TSC:
+		 */
+		atomic_inc(&tsc_count_start);
+
+		rdtscll(tsc_values[smp_processor_id()]);
+		/*
+		 * We clear the TSC in the last loop:
+		 */
+		if (i == NR_LOOPS-1)
+			write_tsc(0, 0);
+
+		/*
+		 * Wait for all APs to leave the synchronization point:
+		 */
+		while (atomic_read(&tsc_count_stop) != num_booting_cpus()-1)
+			mb();
+		atomic_set(&tsc_count_start, 0);
+		wmb();
+		atomic_inc(&tsc_count_stop);
+	}
+
+	sum = 0;
+	for (i = 0; i < NR_CPUS; i++) {
+		if (cpu_isset(i, cpu_callout_map)) {
+			t0 = tsc_values[i];
+			sum += t0;
+		}
+	}
+	avg = sum;
+	do_div(avg, num_booting_cpus());
+
+	sum = 0;
+	for (i = 0; i < NR_CPUS; i++) {
+		if (!cpu_isset(i, cpu_callout_map))
+			continue;
+		delta = tsc_values[i] - avg;
+		if (delta < 0)
+			delta = -delta;
+		/*
+		 * We report bigger than 2 microseconds clock differences.
+		 */
+		if (delta > 2*one_usec) {
+			long realdelta;
+			if (!buggy) {
+				buggy = 1;
+				printk("\n");
+			}
+			realdelta = delta;
+			do_div(realdelta, one_usec);
+			if (tsc_values[i] < avg)
+				realdelta = -realdelta;
+
+			printk(KERN_INFO "CPU#%d had %ld usecs TSC skew, fixed it up.\n", i, realdelta);
+		}
+
+		sum += delta;
+	}
+	if (!buggy)
+		printk("passed.\n");
+}
+
+static void __init synchronize_tsc_ap (void)
+{
+	int i;
+
+	/*
+	 * Not every cpu is online at the time
+	 * this gets called, so we first wait for the BP to
+	 * finish SMP initialization:
+	 */
+	while (!atomic_read(&tsc_start_flag)) mb();
+
+	for (i = 0; i < NR_LOOPS; i++) {
+		atomic_inc(&tsc_count_start);
+		while (atomic_read(&tsc_count_start) != num_booting_cpus())
+			mb();
+
+		rdtscll(tsc_values[smp_processor_id()]);
+		if (i == NR_LOOPS-1)
+			write_tsc(0, 0);
+
+		atomic_inc(&tsc_count_stop);
+		while (atomic_read(&tsc_count_stop) != num_booting_cpus()) mb();
+	}
+}
+#undef NR_LOOPS
+
+extern void calibrate_delay(void);
+
+static atomic_t init_deasserted;
+
+static void __init smp_callin(void)
+{
+	int cpuid, phys_id;
+	unsigned long timeout;
+
+	/*
+	 * If waken up by an INIT in an 82489DX configuration
+	 * we may get here before an INIT-deassert IPI reaches
+	 * our local APIC.  We have to wait for the IPI or we'll
+	 * lock up on an APIC access.
+	 */
+	wait_for_init_deassert(&init_deasserted);
+
+	/*
+	 * (This works even if the APIC is not enabled.)
+	 */
+	phys_id = GET_APIC_ID(apic_read(APIC_ID));
+	cpuid = smp_processor_id();
+	if (cpu_isset(cpuid, cpu_callin_map)) {
+		printk("huh, phys CPU#%d, CPU#%d already present??\n",
+					phys_id, cpuid);
+		BUG();
+	}
+	Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
+
+	/*
+	 * STARTUP IPIs are fragile beasts as they might sometimes
+	 * trigger some glue motherboard logic. Complete APIC bus
+	 * silence for 1 second, this overestimates the time the
+	 * boot CPU is spending to send the up to 2 STARTUP IPIs
+	 * by a factor of two. This should be enough.
+	 */
+
+	/*
+	 * Waiting 2s total for startup (udelay is not yet working)
+	 */
+	timeout = jiffies + 2*HZ;
+	while (time_before(jiffies, timeout)) {
+		/*
+		 * Has the boot CPU finished it's STARTUP sequence?
+		 */
+		if (cpu_isset(cpuid, cpu_callout_map))
+			break;
+		rep_nop();
+	}
+
+	if (!time_before(jiffies, timeout)) {
+		printk("BUG: CPU%d started up but did not get a callout!\n",
+			cpuid);
+		BUG();
+	}
+
+	/*
+	 * the boot CPU has finished the init stage and is spinning
+	 * on callin_map until we finish. We are free to set up this
+	 * CPU, first the APIC. (this is probably redundant on most
+	 * boards)
+	 */
+
+	Dprintk("CALLIN, before setup_local_APIC().\n");
+	smp_callin_clear_local_apic();
+	setup_local_APIC();
+	map_cpu_to_logical_apicid();
+
+	/*
+	 * Get our bogomips.
+	 */
+	calibrate_delay();
+	Dprintk("Stack at about %p\n",&cpuid);
+
+	/*
+	 * Save our processor parameters
+	 */
+ 	smp_store_cpu_info(cpuid);
+
+	disable_APIC_timer();
+
+	/*
+	 * Allow the master to continue.
+	 */
+	cpu_set(cpuid, cpu_callin_map);
+
+	/*
+	 *      Synchronize the TSC with the BP
+	 */
+	if (cpu_has_tsc && cpu_khz)
+		synchronize_tsc_ap();
+}
+
+static int cpucount;
+
+/*
+ * Activate a secondary processor.
+ */
+static void __init start_secondary(void *unused)
+{
+	/*
+	 * Dont put anything before smp_callin(), SMP
+	 * booting is too fragile that we want to limit the
+	 * things done here to the most necessary things.
+	 */
+	cpu_init();
+	smp_callin();
+	while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
+		rep_nop();
+	setup_secondary_APIC_clock();
+	if (nmi_watchdog == NMI_IO_APIC) {
+		disable_8259A_irq(0);
+		enable_NMI_through_LVT0(NULL);
+		enable_8259A_irq(0);
+	}
+	enable_APIC_timer();
+	/*
+	 * low-memory mappings have been cleared, flush them from
+	 * the local TLBs too.
+	 */
+	local_flush_tlb();
+	cpu_set(smp_processor_id(), cpu_online_map);
+
+	/* We can take interrupts now: we're officially "up". */
+	local_irq_enable();
+
+	wmb();
+	cpu_idle();
+}
+
+/*
+ * Everything has been set up for the secondary
+ * CPUs - they just need to reload everything
+ * from the task structure
+ * This function must not return.
+ */
+void __init initialize_secondary(void)
+{
+	/*
+	 * We don't actually need to load the full TSS,
+	 * basically just the stack pointer and the eip.
+	 */
+
+	asm volatile(
+		"movl %0,%%esp\n\t"
+		"jmp *%1"
+		:
+		:"r" (current->thread.esp),"r" (current->thread.eip));
+}
+
+extern struct {
+	void * esp;
+	unsigned short ss;
+} stack_start;
+
+#ifdef CONFIG_NUMA
+
+/* which logical CPUs are on which nodes */
+cpumask_t node_2_cpu_mask[MAX_NUMNODES] =
+				{ [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
+/* which node each logical CPU is on */
+int cpu_2_node[NR_CPUS] = { [0 ... NR_CPUS-1] = 0 };
+EXPORT_SYMBOL(cpu_2_node);
+
+/* set up a mapping between cpu and node. */
+static inline void map_cpu_to_node(int cpu, int node)
+{
+	printk("Mapping cpu %d to node %d\n", cpu, node);
+	cpu_set(cpu, node_2_cpu_mask[node]);
+	cpu_2_node[cpu] = node;
+}
+
+/* undo a mapping between cpu and node. */
+static inline void unmap_cpu_to_node(int cpu)
+{
+	int node;
+
+	printk("Unmapping cpu %d from all nodes\n", cpu);
+	for (node = 0; node < MAX_NUMNODES; node ++)
+		cpu_clear(cpu, node_2_cpu_mask[node]);
+	cpu_2_node[cpu] = 0;
+}
+#else /* !CONFIG_NUMA */
+
+#define map_cpu_to_node(cpu, node)	({})
+#define unmap_cpu_to_node(cpu)	({})
+
+#endif /* CONFIG_NUMA */
+
+u8 cpu_2_logical_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
+
+static void map_cpu_to_logical_apicid(void)
+{
+	int cpu = smp_processor_id();
+	int apicid = logical_smp_processor_id();
+
+	cpu_2_logical_apicid[cpu] = apicid;
+	map_cpu_to_node(cpu, apicid_to_node(apicid));
+}
+
+static void unmap_cpu_to_logical_apicid(int cpu)
+{
+	cpu_2_logical_apicid[cpu] = BAD_APICID;
+	unmap_cpu_to_node(cpu);
+}
+
+#if APIC_DEBUG
+static inline void __inquire_remote_apic(int apicid)
+{
+	int i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
+	char *names[] = { "ID", "VERSION", "SPIV" };
+	int timeout, status;
+
+	printk("Inquiring remote APIC #%d...\n", apicid);
+
+	for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) {
+		printk("... APIC #%d %s: ", apicid, names[i]);
+
+		/*
+		 * Wait for idle.
+		 */
+		apic_wait_icr_idle();
+
+		apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
+		apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
+
+		timeout = 0;
+		do {
+			udelay(100);
+			status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK;
+		} while (status == APIC_ICR_RR_INPROG && timeout++ < 1000);
+
+		switch (status) {
+		case APIC_ICR_RR_VALID:
+			status = apic_read(APIC_RRR);
+			printk("%08x\n", status);
+			break;
+		default:
+			printk("failed\n");
+		}
+	}
+}
+#endif
+
+#ifdef WAKE_SECONDARY_VIA_NMI
+/* 
+ * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
+ * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
+ * won't ... remember to clear down the APIC, etc later.
+ */
+static int __init
+wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
+{
+	unsigned long send_status = 0, accept_status = 0;
+	int timeout, maxlvt;
+
+	/* Target chip */
+	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
+
+	/* Boot on the stack */
+	/* Kick the second */
+	apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+
+	Dprintk("Waiting for send to finish...\n");
+	timeout = 0;
+	do {
+		Dprintk("+");
+		udelay(100);
+		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+	} while (send_status && (timeout++ < 1000));
+
+	/*
+	 * Give the other CPU some time to accept the IPI.
+	 */
+	udelay(200);
+	/*
+	 * Due to the Pentium erratum 3AP.
+	 */
+	maxlvt = get_maxlvt();
+	if (maxlvt > 3) {
+		apic_read_around(APIC_SPIV);
+		apic_write(APIC_ESR, 0);
+	}
+	accept_status = (apic_read(APIC_ESR) & 0xEF);
+	Dprintk("NMI sent.\n");
+
+	if (send_status)
+		printk("APIC never delivered???\n");
+	if (accept_status)
+		printk("APIC delivery error (%lx).\n", accept_status);
+
+	return (send_status | accept_status);
+}
+#endif	/* WAKE_SECONDARY_VIA_NMI */
+
+#ifdef WAKE_SECONDARY_VIA_INIT
+static int __init
+wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
+{
+	unsigned long send_status = 0, accept_status = 0;
+	int maxlvt, timeout, num_starts, j;
+
+	/*
+	 * Be paranoid about clearing APIC errors.
+	 */
+	if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+		apic_read_around(APIC_SPIV);
+		apic_write(APIC_ESR, 0);
+		apic_read(APIC_ESR);
+	}
+
+	Dprintk("Asserting INIT.\n");
+
+	/*
+	 * Turn INIT on target chip
+	 */
+	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+
+	/*
+	 * Send IPI
+	 */
+	apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
+				| APIC_DM_INIT);
+
+	Dprintk("Waiting for send to finish...\n");
+	timeout = 0;
+	do {
+		Dprintk("+");
+		udelay(100);
+		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+	} while (send_status && (timeout++ < 1000));
+
+	mdelay(10);
+
+	Dprintk("Deasserting INIT.\n");
+
+	/* Target chip */
+	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+
+	/* Send IPI */
+	apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+
+	Dprintk("Waiting for send to finish...\n");
+	timeout = 0;
+	do {
+		Dprintk("+");
+		udelay(100);
+		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+	} while (send_status && (timeout++ < 1000));
+
+	atomic_set(&init_deasserted, 1);
+
+	/*
+	 * Should we send STARTUP IPIs ?
+	 *
+	 * Determine this based on the APIC version.
+	 * If we don't have an integrated APIC, don't send the STARTUP IPIs.
+	 */
+	if (APIC_INTEGRATED(apic_version[phys_apicid]))
+		num_starts = 2;
+	else
+		num_starts = 0;
+
+	/*
+	 * Run STARTUP IPI loop.
+	 */
+	Dprintk("#startup loops: %d.\n", num_starts);
+
+	maxlvt = get_maxlvt();
+
+	for (j = 1; j <= num_starts; j++) {
+		Dprintk("Sending STARTUP #%d.\n",j);
+		apic_read_around(APIC_SPIV);
+		apic_write(APIC_ESR, 0);
+		apic_read(APIC_ESR);
+		Dprintk("After apic_write.\n");
+
+		/*
+		 * STARTUP IPI
+		 */
+
+		/* Target chip */
+		apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+
+		/* Boot on the stack */
+		/* Kick the second */
+		apic_write_around(APIC_ICR, APIC_DM_STARTUP
+					| (start_eip >> 12));
+
+		/*
+		 * Give the other CPU some time to accept the IPI.
+		 */
+		udelay(300);
+
+		Dprintk("Startup point 1.\n");
+
+		Dprintk("Waiting for send to finish...\n");
+		timeout = 0;
+		do {
+			Dprintk("+");
+			udelay(100);
+			send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+		} while (send_status && (timeout++ < 1000));
+
+		/*
+		 * Give the other CPU some time to accept the IPI.
+		 */
+		udelay(200);
+		/*
+		 * Due to the Pentium erratum 3AP.
+		 */
+		if (maxlvt > 3) {
+			apic_read_around(APIC_SPIV);
+			apic_write(APIC_ESR, 0);
+		}
+		accept_status = (apic_read(APIC_ESR) & 0xEF);
+		if (send_status || accept_status)
+			break;
+	}
+	Dprintk("After Startup.\n");
+
+	if (send_status)
+		printk("APIC never delivered???\n");
+	if (accept_status)
+		printk("APIC delivery error (%lx).\n", accept_status);
+
+	return (send_status | accept_status);
+}
+#endif	/* WAKE_SECONDARY_VIA_INIT */
+
+extern cpumask_t cpu_initialized;
+
+static int __init do_boot_cpu(int apicid)
+/*
+ * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
+ * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
+ * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu.
+ */
+{
+	struct task_struct *idle;
+	unsigned long boot_error;
+	int timeout, cpu;
+	unsigned long start_eip;
+	unsigned short nmi_high = 0, nmi_low = 0;
+
+	cpu = ++cpucount;
+	/*
+	 * We can't use kernel_thread since we must avoid to
+	 * reschedule the child.
+	 */
+	idle = fork_idle(cpu);
+	if (IS_ERR(idle))
+		panic("failed fork for CPU %d", cpu);
+	idle->thread.eip = (unsigned long) start_secondary;
+	/* start_eip had better be page-aligned! */
+	start_eip = setup_trampoline();
+
+	/* So we see what's up   */
+	printk("Booting processor %d/%d eip %lx\n", cpu, apicid, start_eip);
+	/* Stack for startup_32 can be just as for start_secondary onwards */
+	stack_start.esp = (void *) idle->thread.esp;
+
+	irq_ctx_init(cpu);
+
+	/*
+	 * This grunge runs the startup process for
+	 * the targeted processor.
+	 */
+
+	atomic_set(&init_deasserted, 0);
+
+	Dprintk("Setting warm reset code and vector.\n");
+
+	store_NMI_vector(&nmi_high, &nmi_low);
+
+	smpboot_setup_warm_reset_vector(start_eip);
+
+	/*
+	 * Starting actual IPI sequence...
+	 */
+	boot_error = wakeup_secondary_cpu(apicid, start_eip);
+
+	if (!boot_error) {
+		/*
+		 * allow APs to start initializing.
+		 */
+		Dprintk("Before Callout %d.\n", cpu);
+		cpu_set(cpu, cpu_callout_map);
+		Dprintk("After Callout %d.\n", cpu);
+
+		/*
+		 * Wait 5s total for a response
+		 */
+		for (timeout = 0; timeout < 50000; timeout++) {
+			if (cpu_isset(cpu, cpu_callin_map))
+				break;	/* It has booted */
+			udelay(100);
+		}
+
+		if (cpu_isset(cpu, cpu_callin_map)) {
+			/* number CPUs logically, starting from 1 (BSP is 0) */
+			Dprintk("OK.\n");
+			printk("CPU%d: ", cpu);
+			print_cpu_info(&cpu_data[cpu]);
+			Dprintk("CPU has booted.\n");
+		} else {
+			boot_error= 1;
+			if (*((volatile unsigned char *)trampoline_base)
+					== 0xA5)
+				/* trampoline started but...? */
+				printk("Stuck ??\n");
+			else
+				/* trampoline code not run */
+				printk("Not responding.\n");
+			inquire_remote_apic(apicid);
+		}
+	}
+	x86_cpu_to_apicid[cpu] = apicid;
+	if (boot_error) {
+		/* Try to put things back the way they were before ... */
+		unmap_cpu_to_logical_apicid(cpu);
+		cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
+		cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
+		cpucount--;
+	}
+
+	/* mark "stuck" area as not stuck */
+	*((volatile unsigned long *)trampoline_base) = 0;
+
+	return boot_error;
+}
+
+static void smp_tune_scheduling (void)
+{
+	unsigned long cachesize;       /* kB   */
+	unsigned long bandwidth = 350; /* MB/s */
+	/*
+	 * Rough estimation for SMP scheduling, this is the number of
+	 * cycles it takes for a fully memory-limited process to flush
+	 * the SMP-local cache.
+	 *
+	 * (For a P5 this pretty much means we will choose another idle
+	 *  CPU almost always at wakeup time (this is due to the small
+	 *  L1 cache), on PIIs it's around 50-100 usecs, depending on
+	 *  the cache size)
+	 */
+
+	if (!cpu_khz) {
+		/*
+		 * this basically disables processor-affinity
+		 * scheduling on SMP without a TSC.
+		 */
+		return;
+	} else {
+		cachesize = boot_cpu_data.x86_cache_size;
+		if (cachesize == -1) {
+			cachesize = 16; /* Pentiums, 2x8kB cache */
+			bandwidth = 100;
+		}
+	}
+}
+
+/*
+ * Cycle through the processors sending APIC IPIs to boot each.
+ */
+
+static int boot_cpu_logical_apicid;
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
+
+cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
+
+static void __init smp_boot_cpus(unsigned int max_cpus)
+{
+	int apicid, cpu, bit, kicked;
+	unsigned long bogosum = 0;
+
+	/*
+	 * Setup boot CPU information
+	 */
+	smp_store_cpu_info(0); /* Final full version of the data */
+	printk("CPU%d: ", 0);
+	print_cpu_info(&cpu_data[0]);
+
+	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+	boot_cpu_logical_apicid = logical_smp_processor_id();
+	x86_cpu_to_apicid[0] = boot_cpu_physical_apicid;
+
+	current_thread_info()->cpu = 0;
+	smp_tune_scheduling();
+	cpus_clear(cpu_sibling_map[0]);
+	cpu_set(0, cpu_sibling_map[0]);
+
+	/*
+	 * If we couldn't find an SMP configuration at boot time,
+	 * get out of here now!
+	 */
+	if (!smp_found_config && !acpi_lapic) {
+		printk(KERN_NOTICE "SMP motherboard not detected.\n");
+		smpboot_clear_io_apic_irqs();
+		phys_cpu_present_map = physid_mask_of_physid(0);
+		if (APIC_init_uniprocessor())
+			printk(KERN_NOTICE "Local APIC not detected."
+					   " Using dummy APIC emulation.\n");
+		map_cpu_to_logical_apicid();
+		return;
+	}
+
+	/*
+	 * Should not be necessary because the MP table should list the boot
+	 * CPU too, but we do it for the sake of robustness anyway.
+	 * Makes no sense to do this check in clustered apic mode, so skip it
+	 */
+	if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
+				boot_cpu_physical_apicid);
+		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+	}
+
+	/*
+	 * If we couldn't find a local APIC, then get out of here now!
+	 */
+	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
+		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
+			boot_cpu_physical_apicid);
+		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
+		smpboot_clear_io_apic_irqs();
+		phys_cpu_present_map = physid_mask_of_physid(0);
+		return;
+	}
+
+	verify_local_APIC();
+
+	/*
+	 * If SMP should be disabled, then really disable it!
+	 */
+	if (!max_cpus) {
+		smp_found_config = 0;
+		printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
+		smpboot_clear_io_apic_irqs();
+		phys_cpu_present_map = physid_mask_of_physid(0);
+		return;
+	}
+
+	connect_bsp_APIC();
+	setup_local_APIC();
+	map_cpu_to_logical_apicid();
+
+
+	setup_portio_remap();
+
+	/*
+	 * Scan the CPU present map and fire up the other CPUs via do_boot_cpu
+	 *
+	 * In clustered apic mode, phys_cpu_present_map is a constructed thus:
+	 * bits 0-3 are quad0, 4-7 are quad1, etc. A perverse twist on the 
+	 * clustered apic ID.
+	 */
+	Dprintk("CPU present map: %lx\n", physids_coerce(phys_cpu_present_map));
+
+	kicked = 1;
+	for (bit = 0; kicked < NR_CPUS && bit < MAX_APICS; bit++) {
+		apicid = cpu_present_to_apicid(bit);
+		/*
+		 * Don't even attempt to start the boot CPU!
+		 */
+		if ((apicid == boot_cpu_apicid) || (apicid == BAD_APICID))
+			continue;
+
+		if (!check_apicid_present(bit))
+			continue;
+		if (max_cpus <= cpucount+1)
+			continue;
+
+		if (do_boot_cpu(apicid))
+			printk("CPU #%d not responding - cannot use it.\n",
+								apicid);
+		else
+			++kicked;
+	}
+
+	/*
+	 * Cleanup possible dangling ends...
+	 */
+	smpboot_restore_warm_reset_vector();
+
+	/*
+	 * Allow the user to impress friends.
+	 */
+	Dprintk("Before bogomips.\n");
+	for (cpu = 0; cpu < NR_CPUS; cpu++)
+		if (cpu_isset(cpu, cpu_callout_map))
+			bogosum += cpu_data[cpu].loops_per_jiffy;
+	printk(KERN_INFO
+		"Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+		cpucount+1,
+		bogosum/(500000/HZ),
+		(bogosum/(5000/HZ))%100);
+	
+	Dprintk("Before bogocount - setting activated=1.\n");
+
+	if (smp_b_stepping)
+		printk(KERN_WARNING "WARNING: SMP operation may be unreliable with B stepping processors.\n");
+
+	/*
+	 * Don't taint if we are running SMP kernel on a single non-MP
+	 * approved Athlon
+	 */
+	if (tainted & TAINT_UNSAFE_SMP) {
+		if (cpucount)
+			printk (KERN_INFO "WARNING: This combination of AMD processors is not suitable for SMP.\n");
+		else
+			tainted &= ~TAINT_UNSAFE_SMP;
+	}
+
+	Dprintk("Boot done.\n");
+
+	/*
+	 * construct cpu_sibling_map[], so that we can tell sibling CPUs
+	 * efficiently.
+	 */
+	for (cpu = 0; cpu < NR_CPUS; cpu++)
+		cpus_clear(cpu_sibling_map[cpu]);
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		int siblings = 0;
+		int i;
+		if (!cpu_isset(cpu, cpu_callout_map))
+			continue;
+
+		if (smp_num_siblings > 1) {
+			for (i = 0; i < NR_CPUS; i++) {
+				if (!cpu_isset(i, cpu_callout_map))
+					continue;
+				if (phys_proc_id[cpu] == phys_proc_id[i]) {
+					siblings++;
+					cpu_set(i, cpu_sibling_map[cpu]);
+				}
+			}
+		} else {
+			siblings++;
+			cpu_set(cpu, cpu_sibling_map[cpu]);
+		}
+
+		if (siblings != smp_num_siblings)
+			printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings);
+	}
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		check_nmi_watchdog();
+
+	smpboot_setup_io_apic();
+
+	setup_boot_APIC_clock();
+
+	/*
+	 * Synchronize the TSC with the AP
+	 */
+	if (cpu_has_tsc && cpucount && cpu_khz)
+		synchronize_tsc_bp();
+}
+
+/* These are wrappers to interface to the new boot process.  Someone
+   who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	smp_boot_cpus(max_cpus);
+}
+
+void __devinit smp_prepare_boot_cpu(void)
+{
+	cpu_set(smp_processor_id(), cpu_online_map);
+	cpu_set(smp_processor_id(), cpu_callout_map);
+}
+
+int __devinit __cpu_up(unsigned int cpu)
+{
+	/* This only works at boot for x86.  See "rewrite" above. */
+	if (cpu_isset(cpu, smp_commenced_mask)) {
+		local_irq_enable();
+		return -ENOSYS;
+	}
+
+	/* In case one didn't come up */
+	if (!cpu_isset(cpu, cpu_callin_map)) {
+		local_irq_enable();
+		return -EIO;
+	}
+
+	local_irq_enable();
+	/* Unleash the CPU! */
+	cpu_set(cpu, smp_commenced_mask);
+	while (!cpu_isset(cpu, cpu_online_map))
+		mb();
+	return 0;
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+#ifdef CONFIG_X86_IO_APIC
+	setup_ioapic_dest();
+#endif
+	zap_low_mappings();
+	/*
+	 * Disable executability of the SMP trampoline:
+	 */
+	set_kernel_exec((unsigned long)trampoline_base, trampoline_exec);
+}
+
+void __init smp_intr_init(void)
+{
+	/*
+	 * IRQ0 must be given a fixed assignment and initialized,
+	 * because it's used before the IO-APIC is set up.
+	 */
+	set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+
+	/*
+	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+	 * IPI, driven by wakeup.
+	 */
+	set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+	/* IPI for invalidation */
+	set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+
+	/* IPI for generic function call */
+	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+}
diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c
new file mode 100644
index 000000000000..7b3b27d64409
--- /dev/null
+++ b/arch/i386/kernel/srat.c
@@ -0,0 +1,456 @@
+/*
+ * Some of the code in this file has been gleaned from the 64 bit 
+ * discontigmem support code base.
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.          
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to Pat Gaughen <gone@us.ibm.com>
+ */
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mmzone.h>
+#include <linux/acpi.h>
+#include <linux/nodemask.h>
+#include <asm/srat.h>
+#include <asm/topology.h>
+
+/*
+ * proximity macros and definitions
+ */
+#define NODE_ARRAY_INDEX(x)	((x) / 8)	/* 8 bits/char */
+#define NODE_ARRAY_OFFSET(x)	((x) % 8)	/* 8 bits/char */
+#define BMAP_SET(bmap, bit)	((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit))
+#define BMAP_TEST(bmap, bit)	((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit)))
+#define MAX_PXM_DOMAINS		256	/* 1 byte and no promises about values */
+/* bitmap length; _PXM is at most 255 */
+#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) 
+static u8 pxm_bitmap[PXM_BITMAP_LEN];	/* bitmap of proximity domains */
+
+#define MAX_CHUNKS_PER_NODE	4
+#define MAXCHUNKS		(MAX_CHUNKS_PER_NODE * MAX_NUMNODES)
+struct node_memory_chunk_s {
+	unsigned long	start_pfn;
+	unsigned long	end_pfn;
+	u8	pxm;		// proximity domain of node
+	u8	nid;		// which cnode contains this chunk?
+	u8	bank;		// which mem bank on this node
+};
+static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS];
+
+static int num_memory_chunks;		/* total number of memory chunks */
+static int zholes_size_init;
+static unsigned long zholes_size[MAX_NUMNODES * MAX_NR_ZONES];
+
+extern void * boot_ioremap(unsigned long, unsigned long);
+
+/* Identify CPU proximity domains */
+static void __init parse_cpu_affinity_structure(char *p)
+{
+	struct acpi_table_processor_affinity *cpu_affinity = 
+				(struct acpi_table_processor_affinity *) p;
+
+	if (!cpu_affinity->flags.enabled)
+		return;		/* empty entry */
+
+	/* mark this node as "seen" in node bitmap */
+	BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain);
+
+	printk("CPU 0x%02X in proximity domain 0x%02X\n",
+		cpu_affinity->apic_id, cpu_affinity->proximity_domain);
+}
+
+/*
+ * Identify memory proximity domains and hot-remove capabilities.
+ * Fill node memory chunk list structure.
+ */
+static void __init parse_memory_affinity_structure (char *sratp)
+{
+	unsigned long long paddr, size;
+	unsigned long start_pfn, end_pfn; 
+	u8 pxm;
+	struct node_memory_chunk_s *p, *q, *pend;
+	struct acpi_table_memory_affinity *memory_affinity =
+			(struct acpi_table_memory_affinity *) sratp;
+
+	if (!memory_affinity->flags.enabled)
+		return;		/* empty entry */
+
+	/* mark this node as "seen" in node bitmap */
+	BMAP_SET(pxm_bitmap, memory_affinity->proximity_domain);
+
+	/* calculate info for memory chunk structure */
+	paddr = memory_affinity->base_addr_hi;
+	paddr = (paddr << 32) | memory_affinity->base_addr_lo;
+	size = memory_affinity->length_hi;
+	size = (size << 32) | memory_affinity->length_lo;
+	
+	start_pfn = paddr >> PAGE_SHIFT;
+	end_pfn = (paddr + size) >> PAGE_SHIFT;
+	
+	pxm = memory_affinity->proximity_domain;
+
+	if (num_memory_chunks >= MAXCHUNKS) {
+		printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n",
+			size/(1024*1024), paddr);
+		return;
+	}
+
+	/* Insertion sort based on base address */
+	pend = &node_memory_chunk[num_memory_chunks];
+	for (p = &node_memory_chunk[0]; p < pend; p++) {
+		if (start_pfn < p->start_pfn)
+			break;
+	}
+	if (p < pend) {
+		for (q = pend; q >= p; q--)
+			*(q + 1) = *q;
+	}
+	p->start_pfn = start_pfn;
+	p->end_pfn = end_pfn;
+	p->pxm = pxm;
+
+	num_memory_chunks++;
+
+	printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n",
+		start_pfn, end_pfn,
+		memory_affinity->memory_type,
+		memory_affinity->proximity_domain,
+		(memory_affinity->flags.hot_pluggable ?
+		 "enabled and removable" : "enabled" ) );
+}
+
+#if MAX_NR_ZONES != 3
+#error "MAX_NR_ZONES != 3, chunk_to_zone requires review"
+#endif
+/* Take a chunk of pages from page frame cstart to cend and count the number
+ * of pages in each zone, returned via zones[].
+ */
+static __init void chunk_to_zones(unsigned long cstart, unsigned long cend, 
+		unsigned long *zones)
+{
+	unsigned long max_dma;
+	extern unsigned long max_low_pfn;
+
+	int z;
+	unsigned long rend;
+
+	/* FIXME: MAX_DMA_ADDRESS and max_low_pfn are trying to provide
+	 * similarly scoped information and should be handled in a consistant
+	 * manner.
+	 */
+	max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+
+	/* Split the hole into the zones in which it falls.  Repeatedly
+	 * take the segment in which the remaining hole starts, round it
+	 * to the end of that zone.
+	 */
+	memset(zones, 0, MAX_NR_ZONES * sizeof(long));
+	while (cstart < cend) {
+		if (cstart < max_dma) {
+			z = ZONE_DMA;
+			rend = (cend < max_dma)? cend : max_dma;
+
+		} else if (cstart < max_low_pfn) {
+			z = ZONE_NORMAL;
+			rend = (cend < max_low_pfn)? cend : max_low_pfn;
+
+		} else {
+			z = ZONE_HIGHMEM;
+			rend = cend;
+		}
+		zones[z] += rend - cstart;
+		cstart = rend;
+	}
+}
+
+/*
+ * The SRAT table always lists ascending addresses, so can always
+ * assume that the first "start" address that you see is the real
+ * start of the node, and that the current "end" address is after
+ * the previous one.
+ */
+static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
+{
+	/*
+	 * Only add present memory as told by the e820.
+	 * There is no guarantee from the SRAT that the memory it
+	 * enumerates is present at boot time because it represents
+	 * *possible* memory hotplug areas the same as normal RAM.
+	 */
+	if (memory_chunk->start_pfn >= max_pfn) {
+		printk (KERN_INFO "Ignoring SRAT pfns: 0x%08lx -> %08lx\n",
+			memory_chunk->start_pfn, memory_chunk->end_pfn);
+		return;
+	}
+	if (memory_chunk->nid != nid)
+		return;
+
+	if (!node_has_online_mem(nid))
+		node_start_pfn[nid] = memory_chunk->start_pfn;
+
+	if (node_start_pfn[nid] > memory_chunk->start_pfn)
+		node_start_pfn[nid] = memory_chunk->start_pfn;
+
+	if (node_end_pfn[nid] < memory_chunk->end_pfn)
+		node_end_pfn[nid] = memory_chunk->end_pfn;
+}
+
+/* Parse the ACPI Static Resource Affinity Table */
+static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
+{
+	u8 *start, *end, *p;
+	int i, j, nid;
+	u8 pxm_to_nid_map[MAX_PXM_DOMAINS];/* _PXM to logical node ID map */
+	u8 nid_to_pxm_map[MAX_NUMNODES];/* logical node ID to _PXM map */
+
+	start = (u8 *)(&(sratp->reserved) + 1);	/* skip header */
+	p = start;
+	end = (u8 *)sratp + sratp->header.length;
+
+	memset(pxm_bitmap, 0, sizeof(pxm_bitmap));	/* init proximity domain bitmap */
+	memset(node_memory_chunk, 0, sizeof(node_memory_chunk));
+	memset(zholes_size, 0, sizeof(zholes_size));
+
+	/* -1 in these maps means not available */
+	memset(pxm_to_nid_map, -1, sizeof(pxm_to_nid_map));
+	memset(nid_to_pxm_map, -1, sizeof(nid_to_pxm_map));
+
+	num_memory_chunks = 0;
+	while (p < end) {
+		switch (*p) {
+		case ACPI_SRAT_PROCESSOR_AFFINITY:
+			parse_cpu_affinity_structure(p);
+			break;
+		case ACPI_SRAT_MEMORY_AFFINITY:
+			parse_memory_affinity_structure(p);
+			break;
+		default:
+			printk("ACPI 2.0 SRAT: unknown entry skipped: type=0x%02X, len=%d\n", p[0], p[1]);
+			break;
+		}
+		p += p[1];
+		if (p[1] == 0) {
+			printk("acpi20_parse_srat: Entry length value is zero;"
+				" can't parse any further!\n");
+			break;
+		}
+	}
+
+	if (num_memory_chunks == 0) {
+		printk("could not finy any ACPI SRAT memory areas.\n");
+		goto out_fail;
+	}
+
+	/* Calculate total number of nodes in system from PXM bitmap and create
+	 * a set of sequential node IDs starting at zero.  (ACPI doesn't seem
+	 * to specify the range of _PXM values.)
+	 */
+	/*
+	 * MCD - we no longer HAVE to number nodes sequentially.  PXM domain
+	 * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically
+	 * 32, so we will continue numbering them in this manner until MAX_NUMNODES
+	 * approaches MAX_PXM_DOMAINS for i386.
+	 */
+	nodes_clear(node_online_map);
+	for (i = 0; i < MAX_PXM_DOMAINS; i++) {
+		if (BMAP_TEST(pxm_bitmap, i)) {
+			nid = num_online_nodes();
+			pxm_to_nid_map[i] = nid;
+			nid_to_pxm_map[nid] = i;
+			node_set_online(nid);
+		}
+	}
+	BUG_ON(num_online_nodes() == 0);
+
+	/* set cnode id in memory chunk structure */
+	for (i = 0; i < num_memory_chunks; i++)
+		node_memory_chunk[i].nid = pxm_to_nid_map[node_memory_chunk[i].pxm];
+
+	printk("pxm bitmap: ");
+	for (i = 0; i < sizeof(pxm_bitmap); i++) {
+		printk("%02X ", pxm_bitmap[i]);
+	}
+	printk("\n");
+	printk("Number of logical nodes in system = %d\n", num_online_nodes());
+	printk("Number of memory chunks in system = %d\n", num_memory_chunks);
+
+	for (j = 0; j < num_memory_chunks; j++){
+		struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
+		printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
+		       j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
+		node_read_chunk(chunk->nid, chunk);
+	}
+ 
+	for_each_online_node(nid) {
+		unsigned long start = node_start_pfn[nid];
+		unsigned long end = node_end_pfn[nid];
+
+		memory_present(nid, start, end);
+		node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
+	}
+	return 1;
+out_fail:
+	return 0;
+}
+
+int __init get_memcfg_from_srat(void)
+{
+	struct acpi_table_header *header = NULL;
+	struct acpi_table_rsdp *rsdp = NULL;
+	struct acpi_table_rsdt *rsdt = NULL;
+	struct acpi_pointer *rsdp_address = NULL;
+	struct acpi_table_rsdt saved_rsdt;
+	int tables = 0;
+	int i = 0;
+
+	acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING, rsdp_address);
+
+	if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) {
+		printk("%s: assigning address to rsdp\n", __FUNCTION__);
+		rsdp = (struct acpi_table_rsdp *)
+				(u32)rsdp_address->pointer.physical;
+	} else {
+		printk("%s: rsdp_address is not a physical pointer\n", __FUNCTION__);
+		goto out_err;
+	}
+	if (!rsdp) {
+		printk("%s: Didn't find ACPI root!\n", __FUNCTION__);
+		goto out_err;
+	}
+
+	printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision,
+		rsdp->oem_id);
+
+	if (strncmp(rsdp->signature, RSDP_SIG,strlen(RSDP_SIG))) {
+		printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __FUNCTION__);
+		goto out_err;
+	}
+
+	rsdt = (struct acpi_table_rsdt *)
+	    boot_ioremap(rsdp->rsdt_address, sizeof(struct acpi_table_rsdt));
+
+	if (!rsdt) {
+		printk(KERN_WARNING
+		       "%s: ACPI: Invalid root system description tables (RSDT)\n",
+		       __FUNCTION__);
+		goto out_err;
+	}
+
+	header = & rsdt->header;
+
+	if (strncmp(header->signature, RSDT_SIG, strlen(RSDT_SIG))) {
+		printk(KERN_WARNING "ACPI: RSDT signature incorrect\n");
+		goto out_err;
+	}
+
+	/* 
+	 * The number of tables is computed by taking the 
+	 * size of all entries (header size minus total 
+	 * size of RSDT) divided by the size of each entry
+	 * (4-byte table pointers).
+	 */
+	tables = (header->length - sizeof(struct acpi_table_header)) / 4;
+
+	if (!tables)
+		goto out_err;
+
+	memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt));
+
+	if (saved_rsdt.header.length > sizeof(saved_rsdt)) {
+		printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n",
+		       saved_rsdt.header.length);
+		goto out_err;
+	}
+
+	printk("Begin SRAT table scan....\n");
+
+	for (i = 0; i < tables; i++) {
+		/* Map in header, then map in full table length. */
+		header = (struct acpi_table_header *)
+			boot_ioremap(saved_rsdt.entry[i], sizeof(struct acpi_table_header));
+		if (!header)
+			break;
+		header = (struct acpi_table_header *)
+			boot_ioremap(saved_rsdt.entry[i], header->length);
+		if (!header)
+			break;
+
+		if (strncmp((char *) &header->signature, "SRAT", 4))
+			continue;
+
+		/* we've found the srat table. don't need to look at any more tables */
+		return acpi20_parse_srat((struct acpi_table_srat *)header);
+	}
+out_err:
+	printk("failed to get NUMA memory information from SRAT table\n");
+	return 0;
+}
+
+/* For each node run the memory list to determine whether there are
+ * any memory holes.  For each hole determine which ZONE they fall
+ * into.
+ *
+ * NOTE#1: this requires knowledge of the zone boundries and so
+ * _cannot_ be performed before those are calculated in setup_memory.
+ * 
+ * NOTE#2: we rely on the fact that the memory chunks are ordered by
+ * start pfn number during setup.
+ */
+static void __init get_zholes_init(void)
+{
+	int nid;
+	int c;
+	int first;
+	unsigned long end = 0;
+
+	for_each_online_node(nid) {
+		first = 1;
+		for (c = 0; c < num_memory_chunks; c++){
+			if (node_memory_chunk[c].nid == nid) {
+				if (first) {
+					end = node_memory_chunk[c].end_pfn;
+					first = 0;
+
+				} else {
+					/* Record any gap between this chunk
+					 * and the previous chunk on this node
+					 * against the zones it spans.
+					 */
+					chunk_to_zones(end,
+						node_memory_chunk[c].start_pfn,
+						&zholes_size[nid * MAX_NR_ZONES]);
+				}
+			}
+		}
+	}
+}
+
+unsigned long * __init get_zholes_size(int nid)
+{
+	if (!zholes_size_init) {
+		zholes_size_init++;
+		get_zholes_init();
+	}
+	if (nid >= MAX_NUMNODES || !node_online(nid))
+		printk("%s: nid = %d is invalid/offline. num_online_nodes = %d",
+		       __FUNCTION__, nid, num_online_nodes());
+	return &zholes_size[nid * MAX_NR_ZONES];
+}
diff --git a/arch/i386/kernel/summit.c b/arch/i386/kernel/summit.c
new file mode 100644
index 000000000000..d0e01a3acf35
--- /dev/null
+++ b/arch/i386/kernel/summit.c
@@ -0,0 +1,180 @@
+/*
+ * arch/i386/kernel/summit.c - IBM Summit-Specific Code
+ *
+ * Written By: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/mach-summit/mach_mpparse.h>
+
+static struct rio_table_hdr *rio_table_hdr __initdata;
+static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
+static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
+
+static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
+{
+	int twister = 0, node = 0;
+	int i, bus, num_buses;
+
+	for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
+		if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id){
+			twister = rio_devs[i]->owner_id;
+			break;
+		}
+	}
+	if (i == rio_table_hdr->num_rio_dev){
+		printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__);
+		return last_bus;
+	}
+
+	for(i = 0; i < rio_table_hdr->num_scal_dev; i++){
+		if (scal_devs[i]->node_id == twister){
+			node = scal_devs[i]->node_id;
+			break;
+		}
+	}
+	if (i == rio_table_hdr->num_scal_dev){
+		printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__);
+		return last_bus;
+	}
+
+	switch (rio_devs[wpeg_num]->type){
+	case CompatWPEG:
+		/* The Compatability Winnipeg controls the 2 legacy buses,
+		 * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
+		 * a PCI-PCI bridge card is used in either slot: total 5 buses.
+		 */
+		num_buses = 5;
+		break;
+	case AltWPEG:
+		/* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
+		 * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
+		 * the "extra" buses for each of those slots: total 7 buses.
+		 */
+		num_buses = 7;
+		break;
+	case LookOutAWPEG:
+	case LookOutBWPEG:
+		/* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
+		 * & the "extra" buses for each of those slots: total 9 buses.
+		 */
+		num_buses = 9;
+		break;
+	default:
+		printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __FUNCTION__);
+		return last_bus;
+	}
+
+	for(bus = last_bus; bus < last_bus + num_buses; bus++)
+		mp_bus_id_to_node[bus] = node;
+	return bus;
+}
+
+static int __init build_detail_arrays(void)
+{
+	unsigned long ptr;
+	int i, scal_detail_size, rio_detail_size;
+
+	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+		printk(KERN_WARNING "%s: MAX_NUMNODES too low!  Defined as %d, but system has %d nodes.\n", __FUNCTION__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+		return 0;
+	}
+
+	switch (rio_table_hdr->version){
+	default:
+		printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __FUNCTION__, rio_table_hdr->version);
+		return 0;
+	case 2:
+		scal_detail_size = 11;
+		rio_detail_size = 13;
+		break;
+	case 3:
+		scal_detail_size = 12;
+		rio_detail_size = 15;
+		break;
+	}
+
+	ptr = (unsigned long)rio_table_hdr + 3;
+	for(i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
+		scal_devs[i] = (struct scal_detail *)ptr;
+
+	for(i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
+		rio_devs[i] = (struct rio_detail *)ptr;
+
+	return 1;
+}
+
+void __init setup_summit(void)
+{
+	unsigned long		ptr;
+	unsigned short		offset;
+	int			i, next_wpeg, next_bus = 0;
+
+	/* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
+	ptr = *(unsigned short *)phys_to_virt(0x40Eul);
+	ptr = (unsigned long)phys_to_virt(ptr << 4);
+
+	rio_table_hdr = NULL;
+	offset = 0x180;
+	while (offset){
+		/* The block id is stored in the 2nd word */
+		if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+			/* set the pointer past the offset & block id */
+			rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
+			break;
+		}
+		/* The next offset is stored in the 1st word.  0 means no more */
+		offset = *((unsigned short *)(ptr + offset));
+	}
+	if (!rio_table_hdr){
+		printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__);
+		return;
+	}
+
+	if (!build_detail_arrays())
+		return;
+
+	/* The first Winnipeg we're looking for has an index of 0 */
+	next_wpeg = 0;
+	do {
+		for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
+			if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg){
+				/* It's the Winnipeg we're looking for! */
+				next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
+				next_wpeg++;
+				break;
+			}
+		}
+		/*
+		 * If we go through all Rio devices and don't find one with
+		 * the next index, it means we've found all the Winnipegs,
+		 * and thus all the PCI buses.
+		 */
+		if (i == rio_table_hdr->num_rio_dev)
+			next_wpeg = 0;
+	} while (next_wpeg != 0);
+}
diff --git a/arch/i386/kernel/sys_i386.c b/arch/i386/kernel/sys_i386.c
new file mode 100644
index 000000000000..a4a61976ecb9
--- /dev/null
+++ b/arch/i386/kernel/sys_i386.c
@@ -0,0 +1,252 @@
+/*
+ * linux/arch/i386/kernel/sys_i386.c
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/i386
+ * platform.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+
+#include <asm/uaccess.h>
+#include <asm/ipc.h>
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage int sys_pipe(unsigned long __user * fildes)
+{
+	int fd[2];
+	int error;
+
+	error = do_pipe(fd);
+	if (!error) {
+		if (copy_to_user(fildes, fd, 2*sizeof(int)))
+			error = -EFAULT;
+	}
+	return error;
+}
+
+/* common code for old and new mmaps */
+static inline long do_mmap2(
+	unsigned long addr, unsigned long len,
+	unsigned long prot, unsigned long flags,
+	unsigned long fd, unsigned long pgoff)
+{
+	int error = -EBADF;
+	struct file * file = NULL;
+
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		file = fget(fd);
+		if (!file)
+			goto out;
+	}
+
+	down_write(&current->mm->mmap_sem);
+	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+	up_write(&current->mm->mmap_sem);
+
+	if (file)
+		fput(file);
+out:
+	return error;
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+	unsigned long prot, unsigned long flags,
+	unsigned long fd, unsigned long pgoff)
+{
+	return do_mmap2(addr, len, prot, flags, fd, pgoff);
+}
+
+/*
+ * Perform the select(nd, in, out, ex, tv) and mmap() system
+ * calls. Linux/i386 didn't use to be able to handle more than
+ * 4 system call parameters, so these system calls used a memory
+ * block for parameter passing..
+ */
+
+struct mmap_arg_struct {
+	unsigned long addr;
+	unsigned long len;
+	unsigned long prot;
+	unsigned long flags;
+	unsigned long fd;
+	unsigned long offset;
+};
+
+asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
+{
+	struct mmap_arg_struct a;
+	int err = -EFAULT;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		goto out;
+
+	err = -EINVAL;
+	if (a.offset & ~PAGE_MASK)
+		goto out;
+
+	err = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
+out:
+	return err;
+}
+
+
+struct sel_arg_struct {
+	unsigned long n;
+	fd_set __user *inp, *outp, *exp;
+	struct timeval __user *tvp;
+};
+
+asmlinkage int old_select(struct sel_arg_struct __user *arg)
+{
+	struct sel_arg_struct a;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		return -EFAULT;
+	/* sys_select() does the appropriate kernel locking */
+	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage int sys_ipc (uint call, int first, int second,
+			int third, void __user *ptr, long fifth)
+{
+	int version, ret;
+
+	version = call >> 16; /* hack for backward compatibility */
+	call &= 0xffff;
+
+	switch (call) {
+	case SEMOP:
+		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
+	case SEMTIMEDOP:
+		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
+					(const struct timespec __user *)fifth);
+
+	case SEMGET:
+		return sys_semget (first, second, third);
+	case SEMCTL: {
+		union semun fourth;
+		if (!ptr)
+			return -EINVAL;
+		if (get_user(fourth.__pad, (void __user * __user *) ptr))
+			return -EFAULT;
+		return sys_semctl (first, second, third, fourth);
+	}
+
+	case MSGSND:
+		return sys_msgsnd (first, (struct msgbuf __user *) ptr, 
+				   second, third);
+	case MSGRCV:
+		switch (version) {
+		case 0: {
+			struct ipc_kludge tmp;
+			if (!ptr)
+				return -EINVAL;
+			
+			if (copy_from_user(&tmp,
+					   (struct ipc_kludge __user *) ptr, 
+					   sizeof (tmp)))
+				return -EFAULT;
+			return sys_msgrcv (first, tmp.msgp, second,
+					   tmp.msgtyp, third);
+		}
+		default:
+			return sys_msgrcv (first,
+					   (struct msgbuf __user *) ptr,
+					   second, fifth, third);
+		}
+	case MSGGET:
+		return sys_msgget ((key_t) first, second);
+	case MSGCTL:
+		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
+
+	case SHMAT:
+		switch (version) {
+		default: {
+			ulong raddr;
+			ret = do_shmat (first, (char __user *) ptr, second, &raddr);
+			if (ret)
+				return ret;
+			return put_user (raddr, (ulong __user *) third);
+		}
+		case 1:	/* iBCS2 emulator entry point */
+			if (!segment_eq(get_fs(), get_ds()))
+				return -EINVAL;
+			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
+			return do_shmat (first, (char __user *) ptr, second, (ulong *) third);
+		}
+	case SHMDT: 
+		return sys_shmdt ((char __user *)ptr);
+	case SHMGET:
+		return sys_shmget (first, second, third);
+	case SHMCTL:
+		return sys_shmctl (first, second,
+				   (struct shmid_ds __user *) ptr);
+	default:
+		return -ENOSYS;
+	}
+}
+
+/*
+ * Old cruft
+ */
+asmlinkage int sys_uname(struct old_utsname __user * name)
+{
+	int err;
+	if (!name)
+		return -EFAULT;
+	down_read(&uts_sem);
+	err=copy_to_user(name, &system_utsname, sizeof (*name));
+	up_read(&uts_sem);
+	return err?-EFAULT:0;
+}
+
+asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+{
+	int error;
+
+	if (!name)
+		return -EFAULT;
+	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
+		return -EFAULT;
+  
+  	down_read(&uts_sem);
+	
+	error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
+	error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
+	error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
+	error |= __put_user(0,name->release+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
+	error |= __put_user(0,name->version+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
+	error |= __put_user(0,name->machine+__OLD_UTS_LEN);
+	
+	up_read(&uts_sem);
+	
+	error = error ? -EFAULT : 0;
+
+	return error;
+}
diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c
new file mode 100644
index 000000000000..960d8bd137d0
--- /dev/null
+++ b/arch/i386/kernel/sysenter.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/i386/kernel/sysenter.c
+ *
+ * (C) Copyright 2002 Linus Torvalds
+ *
+ * This file contains the needed initializations to support sysenter.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+#include <linux/sched.h>
+#include <linux/gfp.h>
+#include <linux/string.h>
+#include <linux/elf.h>
+
+#include <asm/cpufeature.h>
+#include <asm/msr.h>
+#include <asm/pgtable.h>
+#include <asm/unistd.h>
+
+extern asmlinkage void sysenter_entry(void);
+
+void enable_sep_cpu(void *info)
+{
+	int cpu = get_cpu();
+	struct tss_struct *tss = &per_cpu(init_tss, cpu);
+
+	tss->ss1 = __KERNEL_CS;
+	tss->esp1 = sizeof(struct tss_struct) + (unsigned long) tss;
+	wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
+	wrmsr(MSR_IA32_SYSENTER_ESP, tss->esp1, 0);
+	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long) sysenter_entry, 0);
+	put_cpu();	
+}
+
+/*
+ * These symbols are defined by vsyscall.o to mark the bounds
+ * of the ELF DSO images included therein.
+ */
+extern const char vsyscall_int80_start, vsyscall_int80_end;
+extern const char vsyscall_sysenter_start, vsyscall_sysenter_end;
+
+static int __init sysenter_setup(void)
+{
+	void *page = (void *)get_zeroed_page(GFP_ATOMIC);
+
+	__set_fixmap(FIX_VSYSCALL, __pa(page), PAGE_READONLY_EXEC);
+
+	if (!boot_cpu_has(X86_FEATURE_SEP)) {
+		memcpy(page,
+		       &vsyscall_int80_start,
+		       &vsyscall_int80_end - &vsyscall_int80_start);
+		return 0;
+	}
+
+	memcpy(page,
+	       &vsyscall_sysenter_start,
+	       &vsyscall_sysenter_end - &vsyscall_sysenter_start);
+
+	on_each_cpu(enable_sep_cpu, NULL, 1, 1);
+	return 0;
+}
+
+__initcall(sysenter_setup);
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
new file mode 100644
index 000000000000..9b55e30e4490
--- /dev/null
+++ b/arch/i386/kernel/time.c
@@ -0,0 +1,476 @@
+/*
+ *  linux/arch/i386/kernel/time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *
+ * This file contains the PC-specific time handling details:
+ * reading the RTC at bootup, etc..
+ * 1994-07-02    Alan Modra
+ *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
+ * 1995-03-26    Markus Kuhn
+ *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
+ *      precision CMOS clock update
+ * 1996-05-03    Ingo Molnar
+ *      fixed time warps in do_[slow|fast]_gettimeoffset()
+ * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
+ *		"A Kernel Model for Precision Timekeeping" by Dave Mills
+ * 1998-09-05    (Various)
+ *	More robust do_fast_gettimeoffset() algorithm implemented
+ *	(works with APM, Cyrix 6x86MX and Centaur C6),
+ *	monotonic gettimeofday() with fast_get_timeoffset(),
+ *	drift-proof precision TSC calibration on boot
+ *	(C. Scott Ananian <cananian@alumni.princeton.edu>, Andrew D.
+ *	Balsa <andrebalsa@altern.org>, Philip Gladstone <philip@raptor.com>;
+ *	ported from 2.0.35 Jumbo-9 by Michael Krause <m.krause@tu-harburg.de>).
+ * 1998-12-16    Andrea Arcangeli
+ *	Fixed Jumbo-9 code in 2.1.131: do_gettimeofday was missing 1 jiffy
+ *	because was not accounting lost_ticks.
+ * 1998-12-24 Copyright (C) 1998  Andrea Arcangeli
+ *	Fixed a xtime SMP race (we need the xtime_lock rw spinlock to
+ *	serialize accesses to xtime/lost_ticks).
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/bcd.h>
+#include <linux/efi.h>
+#include <linux/mca.h>
+
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/msr.h>
+#include <asm/delay.h>
+#include <asm/mpspec.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/timer.h>
+
+#include "mach_time.h"
+
+#include <linux/timex.h>
+#include <linux/config.h>
+
+#include <asm/hpet.h>
+
+#include <asm/arch_hooks.h>
+
+#include "io_ports.h"
+
+extern spinlock_t i8259A_lock;
+int pit_latch_buggy;              /* extern */
+
+#include "do_timer.h"
+
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+unsigned long cpu_khz;	/* Detected as we calibrate the TSC */
+
+extern unsigned long wall_jiffies;
+
+DEFINE_SPINLOCK(rtc_lock);
+
+DEFINE_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
+
+struct timer_opts *cur_timer = &timer_none;
+
+/*
+ * This is a special lock that is owned by the CPU and holds the index
+ * register we are working with.  It is required for NMI access to the
+ * CMOS/RTC registers.  See include/asm-i386/mc146818rtc.h for details.
+ */
+volatile unsigned long cmos_lock = 0;
+EXPORT_SYMBOL(cmos_lock);
+
+/* Routines for accessing the CMOS RAM/RTC. */
+unsigned char rtc_cmos_read(unsigned char addr)
+{
+	unsigned char val;
+	lock_cmos_prefix(addr);
+	outb_p(addr, RTC_PORT(0));
+	val = inb_p(RTC_PORT(1));
+	lock_cmos_suffix(addr);
+	return val;
+}
+EXPORT_SYMBOL(rtc_cmos_read);
+
+void rtc_cmos_write(unsigned char val, unsigned char addr)
+{
+	lock_cmos_prefix(addr);
+	outb_p(addr, RTC_PORT(0));
+	outb_p(val, RTC_PORT(1));
+	lock_cmos_suffix(addr);
+}
+EXPORT_SYMBOL(rtc_cmos_write);
+
+/*
+ * This version of gettimeofday has microsecond resolution
+ * and better than microsecond precision on fast x86 machines with TSC.
+ */
+void do_gettimeofday(struct timeval *tv)
+{
+	unsigned long seq;
+	unsigned long usec, sec;
+	unsigned long max_ntp_tick;
+
+	do {
+		unsigned long lost;
+
+		seq = read_seqbegin(&xtime_lock);
+
+		usec = cur_timer->get_offset();
+		lost = jiffies - wall_jiffies;
+
+		/*
+		 * If time_adjust is negative then NTP is slowing the clock
+		 * so make sure not to go into next possible interval.
+		 * Better to lose some accuracy than have time go backwards..
+		 */
+		if (unlikely(time_adjust < 0)) {
+			max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
+			usec = min(usec, max_ntp_tick);
+
+			if (lost)
+				usec += lost * max_ntp_tick;
+		}
+		else if (unlikely(lost))
+			usec += lost * (USEC_PER_SEC / HZ);
+
+		sec = xtime.tv_sec;
+		usec += (xtime.tv_nsec / 1000);
+	} while (read_seqretry(&xtime_lock, seq));
+
+	while (usec >= 1000000) {
+		usec -= 1000000;
+		sec++;
+	}
+
+	tv->tv_sec = sec;
+	tv->tv_usec = usec;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+	time_t wtm_sec, sec = tv->tv_sec;
+	long wtm_nsec, nsec = tv->tv_nsec;
+
+	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+		return -EINVAL;
+
+	write_seqlock_irq(&xtime_lock);
+	/*
+	 * This is revolting. We need to set "xtime" correctly. However, the
+	 * value in this location is the value at the most recent update of
+	 * wall time.  Discover what correction gettimeofday() would have
+	 * made, and then undo it!
+	 */
+	nsec -= cur_timer->get_offset() * NSEC_PER_USEC;
+	nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
+
+	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+	set_normalized_timespec(&xtime, sec, nsec);
+	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+	time_adjust = 0;		/* stop active adjtime() */
+	time_status |= STA_UNSYNC;
+	time_maxerror = NTP_PHASE_LIMIT;
+	time_esterror = NTP_PHASE_LIMIT;
+	write_sequnlock_irq(&xtime_lock);
+	clock_was_set();
+	return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+static int set_rtc_mmss(unsigned long nowtime)
+{
+	int retval;
+
+	WARN_ON(irqs_disabled());
+
+	/* gets recalled with irq locally disabled */
+	spin_lock_irq(&rtc_lock);
+	if (efi_enabled)
+		retval = efi_set_rtc_mmss(nowtime);
+	else
+		retval = mach_set_rtc_mmss(nowtime);
+	spin_unlock_irq(&rtc_lock);
+
+	return retval;
+}
+
+
+int timer_ack;
+
+/* monotonic_clock(): returns # of nanoseconds passed since time_init()
+ *		Note: This function is required to return accurate
+ *		time even in the absence of multiple timer ticks.
+ */
+unsigned long long monotonic_clock(void)
+{
+	return cur_timer->monotonic_clock();
+}
+EXPORT_SYMBOL(monotonic_clock);
+
+#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
+unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	if (in_lock_functions(pc))
+		return *(unsigned long *)(regs->ebp + 4);
+
+	return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+#endif
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+static inline void do_timer_interrupt(int irq, void *dev_id,
+					struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_IO_APIC
+	if (timer_ack) {
+		/*
+		 * Subtle, when I/O APICs are used we have to ack timer IRQ
+		 * manually to reset the IRR bit for do_slow_gettimeoffset().
+		 * This will also deassert NMI lines for the watchdog if run
+		 * on an 82489DX-based system.
+		 */
+		spin_lock(&i8259A_lock);
+		outb(0x0c, PIC_MASTER_OCW3);
+		/* Ack the IRQ; AEOI will end it automatically. */
+		inb(PIC_MASTER_POLL);
+		spin_unlock(&i8259A_lock);
+	}
+#endif
+
+	do_timer_interrupt_hook(regs);
+
+
+	if (MCA_bus) {
+		/* The PS/2 uses level-triggered interrupts.  You can't
+		turn them off, nor would you want to (any attempt to
+		enable edge-triggered interrupts usually gets intercepted by a
+		special hardware circuit).  Hence we have to acknowledge
+		the timer interrupt.  Through some incredibly stupid
+		design idea, the reset for IRQ 0 is done by setting the
+		high bit of the PPI port B (0x61).  Note that some PS/2s,
+		notably the 55SX, work fine if this is removed.  */
+
+		irq = inb_p( 0x61 );	/* read the current state */
+		outb_p( irq|0x80, 0x61 );	/* reset the IRQ */
+	}
+}
+
+/*
+ * This is the same as the above, except we _also_ save the current
+ * Time Stamp Counter value at the time of the timer interrupt, so that
+ * we later on can estimate the time of day more exactly.
+ */
+irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/*
+	 * Here we are in the timer irq handler. We just have irqs locally
+	 * disabled but we don't know if the timer_bh is running on the other
+	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+	 * the irq version of write_lock because as just said we have irq
+	 * locally disabled. -arca
+	 */
+	write_seqlock(&xtime_lock);
+
+	cur_timer->mark_offset();
+ 
+	do_timer_interrupt(irq, NULL, regs);
+
+	write_sequnlock(&xtime_lock);
+	return IRQ_HANDLED;
+}
+
+/* not static: needed by APM */
+unsigned long get_cmos_time(void)
+{
+	unsigned long retval;
+
+	spin_lock(&rtc_lock);
+
+	if (efi_enabled)
+		retval = efi_get_time();
+	else
+		retval = mach_get_cmos_time();
+
+	spin_unlock(&rtc_lock);
+
+	return retval;
+}
+static void sync_cmos_clock(unsigned long dummy);
+
+static struct timer_list sync_cmos_timer =
+                                      TIMER_INITIALIZER(sync_cmos_clock, 0, 0);
+
+static void sync_cmos_clock(unsigned long dummy)
+{
+	struct timeval now, next;
+	int fail = 1;
+
+	/*
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
+	 * This code is run on a timer.  If the clock is set, that timer
+	 * may not expire at the correct time.  Thus, we adjust...
+	 */
+	if ((time_status & STA_UNSYNC) != 0)
+		/*
+		 * Not synced, exit, do not restart a timer (if one is
+		 * running, let it run out).
+		 */
+		return;
+
+	do_gettimeofday(&now);
+	if (now.tv_usec >= USEC_AFTER - ((unsigned) TICK_SIZE) / 2 &&
+	    now.tv_usec <= USEC_BEFORE + ((unsigned) TICK_SIZE) / 2)
+		fail = set_rtc_mmss(now.tv_sec);
+
+	next.tv_usec = USEC_AFTER - now.tv_usec;
+	if (next.tv_usec <= 0)
+		next.tv_usec += USEC_PER_SEC;
+
+	if (!fail)
+		next.tv_sec = 659;
+	else
+		next.tv_sec = 0;
+
+	if (next.tv_usec >= USEC_PER_SEC) {
+		next.tv_sec++;
+		next.tv_usec -= USEC_PER_SEC;
+	}
+	mod_timer(&sync_cmos_timer, jiffies + timeval_to_jiffies(&next));
+}
+
+void notify_arch_cmos_timer(void)
+{
+	mod_timer(&sync_cmos_timer, jiffies + 1);
+}
+
+static long clock_cmos_diff, sleep_start;
+
+static int timer_suspend(struct sys_device *dev, u32 state)
+{
+	/*
+	 * Estimate time zone so that set_time can update the clock
+	 */
+	clock_cmos_diff = -get_cmos_time();
+	clock_cmos_diff += get_seconds();
+	sleep_start = get_cmos_time();
+	return 0;
+}
+
+static int timer_resume(struct sys_device *dev)
+{
+	unsigned long flags;
+	unsigned long sec;
+	unsigned long sleep_length;
+
+#ifdef CONFIG_HPET_TIMER
+	if (is_hpet_enabled())
+		hpet_reenable();
+#endif
+	sec = get_cmos_time() + clock_cmos_diff;
+	sleep_length = (get_cmos_time() - sleep_start) * HZ;
+	write_seqlock_irqsave(&xtime_lock, flags);
+	xtime.tv_sec = sec;
+	xtime.tv_nsec = 0;
+	write_sequnlock_irqrestore(&xtime_lock, flags);
+	jiffies += sleep_length;
+	wall_jiffies += sleep_length;
+	return 0;
+}
+
+static struct sysdev_class timer_sysclass = {
+	.resume = timer_resume,
+	.suspend = timer_suspend,
+	set_kset_name("timer"),
+};
+
+
+/* XXX this driverfs stuff should probably go elsewhere later -john */
+static struct sys_device device_timer = {
+	.id	= 0,
+	.cls	= &timer_sysclass,
+};
+
+static int time_init_device(void)
+{
+	int error = sysdev_class_register(&timer_sysclass);
+	if (!error)
+		error = sysdev_register(&device_timer);
+	return error;
+}
+
+device_initcall(time_init_device);
+
+#ifdef CONFIG_HPET_TIMER
+extern void (*late_time_init)(void);
+/* Duplicate of time_init() below, with hpet_enable part added */
+static void __init hpet_time_init(void)
+{
+	xtime.tv_sec = get_cmos_time();
+	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+	set_normalized_timespec(&wall_to_monotonic,
+		-xtime.tv_sec, -xtime.tv_nsec);
+
+	if (hpet_enable() >= 0) {
+		printk("Using HPET for base-timer\n");
+	}
+
+	cur_timer = select_timer();
+	printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
+
+	time_init_hook();
+}
+#endif
+
+void __init time_init(void)
+{
+#ifdef CONFIG_HPET_TIMER
+	if (is_hpet_capable()) {
+		/*
+		 * HPET initialization needs to do memory-mapped io. So, let
+		 * us do a late initialization after mem_init().
+		 */
+		late_time_init = hpet_time_init;
+		return;
+	}
+#endif
+	xtime.tv_sec = get_cmos_time();
+	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+	set_normalized_timespec(&wall_to_monotonic,
+		-xtime.tv_sec, -xtime.tv_nsec);
+
+	cur_timer = select_timer();
+	printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
+
+	time_init_hook();
+}
diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
new file mode 100644
index 000000000000..244a31b04be7
--- /dev/null
+++ b/arch/i386/kernel/time_hpet.c
@@ -0,0 +1,458 @@
+/*
+ *  linux/arch/i386/kernel/time_hpet.c
+ *  This code largely copied from arch/x86_64/kernel/time.c
+ *  See that file for credits.
+ *
+ *  2003-06-30    Venkatesh Pallipadi - Additional changes for HPET support
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/timer.h>
+#include <asm/fixmap.h>
+#include <asm/apic.h>
+
+#include <linux/timex.h>
+#include <linux/config.h>
+
+#include <asm/hpet.h>
+#include <linux/hpet.h>
+
+static unsigned long hpet_period;	/* fsecs / HPET clock */
+unsigned long hpet_tick;		/* hpet clks count per tick */
+unsigned long hpet_address;		/* hpet memory map physical address */
+
+static int use_hpet; 		/* can be used for runtime check of hpet */
+static int boot_hpet_disable; 	/* boottime override for HPET timer */
+static void __iomem * hpet_virt_address;	/* hpet kernel virtual address */
+
+#define FSEC_TO_USEC (1000000000UL)
+
+int hpet_readl(unsigned long a)
+{
+	return readl(hpet_virt_address + a);
+}
+
+static void hpet_writel(unsigned long d, unsigned long a)
+{
+	writel(d, hpet_virt_address + a);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+/*
+ * HPET counters dont wrap around on every tick. They just change the
+ * comparator value and continue. Next tick can be caught by checking
+ * for a change in the comparator value. Used in apic.c.
+ */
+static void __init wait_hpet_tick(void)
+{
+	unsigned int start_cmp_val, end_cmp_val;
+
+	start_cmp_val = hpet_readl(HPET_T0_CMP);
+	do {
+		end_cmp_val = hpet_readl(HPET_T0_CMP);
+	} while (start_cmp_val == end_cmp_val);
+}
+#endif
+
+static int hpet_timer_stop_set_go(unsigned long tick)
+{
+	unsigned int cfg;
+
+	/*
+	 * Stop the timers and reset the main counter.
+	 */
+	cfg = hpet_readl(HPET_CFG);
+	cfg &= ~HPET_CFG_ENABLE;
+	hpet_writel(cfg, HPET_CFG);
+	hpet_writel(0, HPET_COUNTER);
+	hpet_writel(0, HPET_COUNTER + 4);
+
+	/*
+	 * Set up timer 0, as periodic with first interrupt to happen at
+	 * hpet_tick, and period also hpet_tick.
+	 */
+	cfg = hpet_readl(HPET_T0_CFG);
+	cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
+	       HPET_TN_SETVAL | HPET_TN_32BIT;
+	hpet_writel(cfg, HPET_T0_CFG);
+
+	/*
+	 * The first write after writing TN_SETVAL to the config register sets
+	 * the counter value, the second write sets the threshold.
+	 */
+	hpet_writel(tick, HPET_T0_CMP);
+	hpet_writel(tick, HPET_T0_CMP);
+
+	/*
+ 	 * Go!
+ 	 */
+	cfg = hpet_readl(HPET_CFG);
+	cfg |= HPET_CFG_ENABLE | HPET_CFG_LEGACY;
+	hpet_writel(cfg, HPET_CFG);
+
+	return 0;
+}
+
+/*
+ * Check whether HPET was found by ACPI boot parse. If yes setup HPET
+ * counter 0 for kernel base timer.
+ */
+int __init hpet_enable(void)
+{
+	unsigned int id;
+	unsigned long tick_fsec_low, tick_fsec_high; /* tick in femto sec */
+	unsigned long hpet_tick_rem;
+
+	if (boot_hpet_disable)
+		return -1;
+
+	if (!hpet_address) {
+		return -1;
+	}
+	hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
+	/*
+	 * Read the period, compute tick and quotient.
+	 */
+	id = hpet_readl(HPET_ID);
+
+	/*
+	 * We are checking for value '1' or more in number field if
+	 * CONFIG_HPET_EMULATE_RTC is set because we will need an
+	 * additional timer for RTC emulation.
+	 * However, we can do with one timer otherwise using the
+	 * the single HPET timer for system time.
+	 */
+	if (
+#ifdef CONFIG_HPET_EMULATE_RTC
+		!(id & HPET_ID_NUMBER) ||
+#endif
+	    !(id & HPET_ID_LEGSUP))
+		return -1;
+
+	hpet_period = hpet_readl(HPET_PERIOD);
+	if ((hpet_period < HPET_MIN_PERIOD) || (hpet_period > HPET_MAX_PERIOD))
+		return -1;
+
+	/*
+	 * 64 bit math
+	 * First changing tick into fsec
+	 * Then 64 bit div to find number of hpet clk per tick
+	 */
+	ASM_MUL64_REG(tick_fsec_low, tick_fsec_high,
+			KERNEL_TICK_USEC, FSEC_TO_USEC);
+	ASM_DIV64_REG(hpet_tick, hpet_tick_rem,
+			hpet_period, tick_fsec_low, tick_fsec_high);
+
+	if (hpet_tick_rem > (hpet_period >> 1))
+		hpet_tick++; /* rounding the result */
+
+	if (hpet_timer_stop_set_go(hpet_tick))
+		return -1;
+
+	use_hpet = 1;
+
+#ifdef	CONFIG_HPET
+	{
+		struct hpet_data	hd;
+		unsigned int 		ntimer;
+
+		memset(&hd, 0, sizeof (hd));
+
+		ntimer = hpet_readl(HPET_ID);
+		ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
+		ntimer++;
+
+		/*
+		 * Register with driver.
+		 * Timer0 and Timer1 is used by platform.
+		 */
+		hd.hd_phys_address = hpet_address;
+		hd.hd_address = hpet_virt_address;
+		hd.hd_nirqs = ntimer;
+		hd.hd_flags = HPET_DATA_PLATFORM;
+		hpet_reserve_timer(&hd, 0);
+#ifdef	CONFIG_HPET_EMULATE_RTC
+		hpet_reserve_timer(&hd, 1);
+#endif
+		hd.hd_irq[0] = HPET_LEGACY_8254;
+		hd.hd_irq[1] = HPET_LEGACY_RTC;
+		if (ntimer > 2) {
+			struct hpet __iomem	*hpet;
+			struct hpet_timer __iomem *timer;
+			int			i;
+
+			hpet = hpet_virt_address;
+
+			for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer;
+				timer++, i++)
+				hd.hd_irq[i] = (timer->hpet_config &
+					Tn_INT_ROUTE_CNF_MASK) >>
+					Tn_INT_ROUTE_CNF_SHIFT;
+
+		}
+
+		hpet_alloc(&hd);
+	}
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	wait_timer_tick = wait_hpet_tick;
+#endif
+	return 0;
+}
+
+int hpet_reenable(void)
+{
+	return hpet_timer_stop_set_go(hpet_tick);
+}
+
+int is_hpet_enabled(void)
+{
+	return use_hpet;
+}
+
+int is_hpet_capable(void)
+{
+	if (!boot_hpet_disable && hpet_address)
+		return 1;
+	return 0;
+}
+
+static int __init hpet_setup(char* str)
+{
+	if (str) {
+		if (!strncmp("disable", str, 7))
+			boot_hpet_disable = 1;
+	}
+	return 1;
+}
+
+__setup("hpet=", hpet_setup);
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
+ * is enabled, we support RTC interrupt functionality in software.
+ * RTC has 3 kinds of interrupts:
+ * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
+ *    is updated
+ * 2) Alarm Interrupt - generate an interrupt at a specific time of day
+ * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
+ *    2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
+ * (1) and (2) above are implemented using polling at a frequency of
+ * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
+ * overhead. (DEFAULT_RTC_INT_FREQ)
+ * For (3), we use interrupts at 64Hz or user specified periodic
+ * frequency, whichever is higher.
+ */
+#include <linux/mc146818rtc.h>
+#include <linux/rtc.h>
+
+extern irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+#define DEFAULT_RTC_INT_FREQ 	64
+#define RTC_NUM_INTS 		1
+
+static unsigned long UIE_on;
+static unsigned long prev_update_sec;
+
+static unsigned long AIE_on;
+static struct rtc_time alarm_time;
+
+static unsigned long PIE_on;
+static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
+static unsigned long PIE_count;
+
+static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+
+/*
+ * Timer 1 for RTC, we do not use periodic interrupt feature,
+ * even if HPET supports periodic interrupts on Timer 1.
+ * The reason being, to set up a periodic interrupt in HPET, we need to
+ * stop the main counter. And if we do that everytime someone diables/enables
+ * RTC, we will have adverse effect on main kernel timer running on Timer 0.
+ * So, for the time being, simulate the periodic interrupt in software.
+ *
+ * hpet_rtc_timer_init() is called for the first time and during subsequent
+ * interuppts reinit happens through hpet_rtc_timer_reinit().
+ */
+int hpet_rtc_timer_init(void)
+{
+	unsigned int cfg, cnt;
+	unsigned long flags;
+
+	if (!is_hpet_enabled())
+		return 0;
+	/*
+	 * Set the counter 1 and enable the interrupts.
+	 */
+	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
+		hpet_rtc_int_freq = PIE_freq;
+	else
+		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
+
+	local_irq_save(flags);
+	cnt = hpet_readl(HPET_COUNTER);
+	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
+	hpet_writel(cnt, HPET_T1_CMP);
+	local_irq_restore(flags);
+
+	cfg = hpet_readl(HPET_T1_CFG);
+	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+	hpet_writel(cfg, HPET_T1_CFG);
+
+	return 1;
+}
+
+static void hpet_rtc_timer_reinit(void)
+{
+	unsigned int cfg, cnt;
+
+	if (!(PIE_on | AIE_on | UIE_on))
+		return;
+
+	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
+		hpet_rtc_int_freq = PIE_freq;
+	else
+		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
+
+	/* It is more accurate to use the comparator value than current count.*/
+	cnt = hpet_readl(HPET_T1_CMP);
+	cnt += hpet_tick*HZ/hpet_rtc_int_freq;
+	hpet_writel(cnt, HPET_T1_CMP);
+
+	cfg = hpet_readl(HPET_T1_CFG);
+	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+	hpet_writel(cfg, HPET_T1_CFG);
+
+	return;
+}
+
+/*
+ * The functions below are called from rtc driver.
+ * Return 0 if HPET is not being used.
+ * Otherwise do the necessary changes and return 1.
+ */
+int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
+{
+	if (!is_hpet_enabled())
+		return 0;
+
+	if (bit_mask & RTC_UIE)
+		UIE_on = 0;
+	if (bit_mask & RTC_PIE)
+		PIE_on = 0;
+	if (bit_mask & RTC_AIE)
+		AIE_on = 0;
+
+	return 1;
+}
+
+int hpet_set_rtc_irq_bit(unsigned long bit_mask)
+{
+	int timer_init_reqd = 0;
+
+	if (!is_hpet_enabled())
+		return 0;
+
+	if (!(PIE_on | AIE_on | UIE_on))
+		timer_init_reqd = 1;
+
+	if (bit_mask & RTC_UIE) {
+		UIE_on = 1;
+	}
+	if (bit_mask & RTC_PIE) {
+		PIE_on = 1;
+		PIE_count = 0;
+	}
+	if (bit_mask & RTC_AIE) {
+		AIE_on = 1;
+	}
+
+	if (timer_init_reqd)
+		hpet_rtc_timer_init();
+
+	return 1;
+}
+
+int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
+{
+	if (!is_hpet_enabled())
+		return 0;
+
+	alarm_time.tm_hour = hrs;
+	alarm_time.tm_min = min;
+	alarm_time.tm_sec = sec;
+
+	return 1;
+}
+
+int hpet_set_periodic_freq(unsigned long freq)
+{
+	if (!is_hpet_enabled())
+		return 0;
+
+	PIE_freq = freq;
+	PIE_count = 0;
+
+	return 1;
+}
+
+int hpet_rtc_dropped_irq(void)
+{
+	if (!is_hpet_enabled())
+		return 0;
+
+	return 1;
+}
+
+irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct rtc_time curr_time;
+	unsigned long rtc_int_flag = 0;
+	int call_rtc_interrupt = 0;
+
+	hpet_rtc_timer_reinit();
+
+	if (UIE_on | AIE_on) {
+		rtc_get_rtc_time(&curr_time);
+	}
+	if (UIE_on) {
+		if (curr_time.tm_sec != prev_update_sec) {
+			/* Set update int info, call real rtc int routine */
+			call_rtc_interrupt = 1;
+			rtc_int_flag = RTC_UF;
+			prev_update_sec = curr_time.tm_sec;
+		}
+	}
+	if (PIE_on) {
+		PIE_count++;
+		if (PIE_count >= hpet_rtc_int_freq/PIE_freq) {
+			/* Set periodic int info, call real rtc int routine */
+			call_rtc_interrupt = 1;
+			rtc_int_flag |= RTC_PF;
+			PIE_count = 0;
+		}
+	}
+	if (AIE_on) {
+		if ((curr_time.tm_sec == alarm_time.tm_sec) &&
+		    (curr_time.tm_min == alarm_time.tm_min) &&
+		    (curr_time.tm_hour == alarm_time.tm_hour)) {
+			/* Set alarm int info, call real rtc int routine */
+			call_rtc_interrupt = 1;
+			rtc_int_flag |= RTC_AF;
+		}
+	}
+	if (call_rtc_interrupt) {
+		rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
+		rtc_interrupt(rtc_int_flag, dev_id, regs);
+	}
+	return IRQ_HANDLED;
+}
+#endif
+
diff --git a/arch/i386/kernel/timers/Makefile b/arch/i386/kernel/timers/Makefile
new file mode 100644
index 000000000000..8fa12be658dd
--- /dev/null
+++ b/arch/i386/kernel/timers/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for x86 timers
+#
+
+obj-y := timer.o timer_none.o timer_tsc.o timer_pit.o common.o
+
+obj-$(CONFIG_X86_CYCLONE_TIMER)	+= timer_cyclone.o
+obj-$(CONFIG_HPET_TIMER)	+= timer_hpet.o
+obj-$(CONFIG_X86_PM_TIMER)	+= timer_pm.o
diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c
new file mode 100644
index 000000000000..f7f90005e22e
--- /dev/null
+++ b/arch/i386/kernel/timers/common.c
@@ -0,0 +1,160 @@
+/*
+ *	Common functions used across the timers go here
+ */
+
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+
+#include <asm/io.h>
+#include <asm/timer.h>
+#include <asm/hpet.h>
+
+#include "mach_timer.h"
+
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+
+#define CALIBRATE_TIME	(5 * 1000020/HZ)
+
+unsigned long __init calibrate_tsc(void)
+{
+	mach_prepare_counter();
+
+	{
+		unsigned long startlow, starthigh;
+		unsigned long endlow, endhigh;
+		unsigned long count;
+
+		rdtsc(startlow,starthigh);
+		mach_countup(&count);
+		rdtsc(endlow,endhigh);
+
+
+		/* Error: ECTCNEVERSET */
+		if (count <= 1)
+			goto bad_ctc;
+
+		/* 64-bit subtract - gcc just messes up with long longs */
+		__asm__("subl %2,%0\n\t"
+			"sbbl %3,%1"
+			:"=a" (endlow), "=d" (endhigh)
+			:"g" (startlow), "g" (starthigh),
+			 "0" (endlow), "1" (endhigh));
+
+		/* Error: ECPUTOOFAST */
+		if (endhigh)
+			goto bad_ctc;
+
+		/* Error: ECPUTOOSLOW */
+		if (endlow <= CALIBRATE_TIME)
+			goto bad_ctc;
+
+		__asm__("divl %2"
+			:"=a" (endlow), "=d" (endhigh)
+			:"r" (endlow), "0" (0), "1" (CALIBRATE_TIME));
+
+		return endlow;
+	}
+
+	/*
+	 * The CTC wasn't reliable: we got a hit on the very first read,
+	 * or the CPU was so fast/slow that the quotient wouldn't fit in
+	 * 32 bits..
+	 */
+bad_ctc:
+	return 0;
+}
+
+#ifdef CONFIG_HPET_TIMER
+/* ------ Calibrate the TSC using HPET -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for getting the CPU freq.
+ * Second output is parameter 1 (when non NULL)
+ * Set 2^32 * (1 / (tsc per HPET clk)) for delay_hpet().
+ * calibrate_tsc() calibrates the processor TSC by comparing
+ * it to the HPET timer of known frequency.
+ * Too much 64-bit arithmetic here to do this cleanly in C
+ */
+#define CALIBRATE_CNT_HPET 	(5 * hpet_tick)
+#define CALIBRATE_TIME_HPET 	(5 * KERNEL_TICK_USEC)
+
+unsigned long __init calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr)
+{
+	unsigned long tsc_startlow, tsc_starthigh;
+	unsigned long tsc_endlow, tsc_endhigh;
+	unsigned long hpet_start, hpet_end;
+	unsigned long result, remain;
+
+	hpet_start = hpet_readl(HPET_COUNTER);
+	rdtsc(tsc_startlow, tsc_starthigh);
+	do {
+		hpet_end = hpet_readl(HPET_COUNTER);
+	} while ((hpet_end - hpet_start) < CALIBRATE_CNT_HPET);
+	rdtsc(tsc_endlow, tsc_endhigh);
+
+	/* 64-bit subtract - gcc just messes up with long longs */
+	__asm__("subl %2,%0\n\t"
+		"sbbl %3,%1"
+		:"=a" (tsc_endlow), "=d" (tsc_endhigh)
+		:"g" (tsc_startlow), "g" (tsc_starthigh),
+		 "0" (tsc_endlow), "1" (tsc_endhigh));
+
+	/* Error: ECPUTOOFAST */
+	if (tsc_endhigh)
+		goto bad_calibration;
+
+	/* Error: ECPUTOOSLOW */
+	if (tsc_endlow <= CALIBRATE_TIME_HPET)
+		goto bad_calibration;
+
+	ASM_DIV64_REG(result, remain, tsc_endlow, 0, CALIBRATE_TIME_HPET);
+	if (remain > (tsc_endlow >> 1))
+		result++; /* rounding the result */
+
+	if (tsc_hpet_quotient_ptr) {
+		unsigned long tsc_hpet_quotient;
+
+		ASM_DIV64_REG(tsc_hpet_quotient, remain, tsc_endlow, 0,
+			CALIBRATE_CNT_HPET);
+		if (remain > (tsc_endlow >> 1))
+			tsc_hpet_quotient++; /* rounding the result */
+		*tsc_hpet_quotient_ptr = tsc_hpet_quotient;
+	}
+
+	return result;
+bad_calibration:
+	/*
+	 * the CPU was so fast/slow that the quotient wouldn't fit in
+	 * 32 bits..
+	 */
+	return 0;
+}
+#endif
+
+/* calculate cpu_khz */
+void __init init_cpu_khz(void)
+{
+	if (cpu_has_tsc) {
+		unsigned long tsc_quotient = calibrate_tsc();
+		if (tsc_quotient) {
+			/* report CPU clock rate in Hz.
+			 * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+			 * clock/second. Our precision is about 100 ppm.
+			 */
+			{	unsigned long eax=0, edx=1000;
+				__asm__("divl %2"
+		       		:"=a" (cpu_khz), "=d" (edx)
+        	       		:"r" (tsc_quotient),
+	                	"0" (eax), "1" (edx));
+				printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000);
+			}
+		}
+	}
+}
diff --git a/arch/i386/kernel/timers/timer.c b/arch/i386/kernel/timers/timer.c
new file mode 100644
index 000000000000..a3d6a288088b
--- /dev/null
+++ b/arch/i386/kernel/timers/timer.c
@@ -0,0 +1,66 @@
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/timer.h>
+
+#ifdef CONFIG_HPET_TIMER
+/*
+ * HPET memory read is slower than tsc reads, but is more dependable as it
+ * always runs at constant frequency and reduces complexity due to
+ * cpufreq. So, we prefer HPET timer to tsc based one. Also, we cannot use
+ * timer_pit when HPET is active. So, we default to timer_tsc.
+ */
+#endif
+/* list of timers, ordered by preference, NULL terminated */
+static struct init_timer_opts* __initdata timers[] = {
+#ifdef CONFIG_X86_CYCLONE_TIMER
+	&timer_cyclone_init,
+#endif
+#ifdef CONFIG_HPET_TIMER
+	&timer_hpet_init,
+#endif
+#ifdef CONFIG_X86_PM_TIMER
+	&timer_pmtmr_init,
+#endif
+	&timer_tsc_init,
+	&timer_pit_init,
+	NULL,
+};
+
+static char clock_override[10] __initdata;
+
+static int __init clock_setup(char* str)
+{
+	if (str)
+		strlcpy(clock_override, str, sizeof(clock_override));
+	return 1;
+}
+__setup("clock=", clock_setup);
+
+
+/* The chosen timesource has been found to be bad.
+ * Fall back to a known good timesource (the PIT)
+ */
+void clock_fallback(void)
+{
+	cur_timer = &timer_pit;
+}
+
+/* iterates through the list of timers, returning the first 
+ * one that initializes successfully.
+ */
+struct timer_opts* __init select_timer(void)
+{
+	int i = 0;
+	
+	/* find most preferred working timer */
+	while (timers[i]) {
+		if (timers[i]->init)
+			if (timers[i]->init(clock_override) == 0)
+				return timers[i]->opts;
+		++i;
+	}
+		
+	panic("select_timer: Cannot find a suitable timer\n");
+	return NULL;
+}
diff --git a/arch/i386/kernel/timers/timer_cyclone.c b/arch/i386/kernel/timers/timer_cyclone.c
new file mode 100644
index 000000000000..f6f1206a11bb
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_cyclone.c
@@ -0,0 +1,259 @@
+/*	Cyclone-timer: 
+ *		This code implements timer_ops for the cyclone counter found
+ *		on IBM x440, x360, and other Summit based systems.
+ *
+ *	Copyright (C) 2002 IBM, John Stultz (johnstul@us.ibm.com)
+ */
+
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+
+#include <asm/timer.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#include "io_ports.h"
+
+extern spinlock_t i8253_lock;
+
+/* Number of usecs that the last interrupt was delayed */
+static int delay_at_last_interrupt;
+
+#define CYCLONE_CBAR_ADDR 0xFEB00CD0
+#define CYCLONE_PMCC_OFFSET 0x51A0
+#define CYCLONE_MPMC_OFFSET 0x51D0
+#define CYCLONE_MPCS_OFFSET 0x51A8
+#define CYCLONE_TIMER_FREQ 100000000
+#define CYCLONE_TIMER_MASK (((u64)1<<40)-1) /* 40 bit mask */
+int use_cyclone = 0;
+
+static u32* volatile cyclone_timer;	/* Cyclone MPMC0 register */
+static u32 last_cyclone_low;
+static u32 last_cyclone_high;
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+/* helper macro to atomically read both cyclone counter registers */
+#define read_cyclone_counter(low,high) \
+	do{ \
+		high = cyclone_timer[1]; low = cyclone_timer[0]; \
+	} while (high != cyclone_timer[1]);
+
+
+static void mark_offset_cyclone(void)
+{
+	unsigned long lost, delay;
+	unsigned long delta = last_cyclone_low;
+	int count;
+	unsigned long long this_offset, last_offset;
+
+	write_seqlock(&monotonic_lock);
+	last_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low;
+	
+	spin_lock(&i8253_lock);
+	read_cyclone_counter(last_cyclone_low,last_cyclone_high);
+
+	/* read values for delay_at_last_interrupt */
+	outb_p(0x00, 0x43);     /* latch the count ASAP */
+
+	count = inb_p(0x40);    /* read the latched count */
+	count |= inb(0x40) << 8;
+
+	/*
+	 * VIA686a test code... reset the latch if count > max + 1
+	 * from timer_pit.c - cjb
+	 */
+	if (count > LATCH) {
+		outb_p(0x34, PIT_MODE);
+		outb_p(LATCH & 0xff, PIT_CH0);
+		outb(LATCH >> 8, PIT_CH0);
+		count = LATCH - 1;
+	}
+	spin_unlock(&i8253_lock);
+
+	/* lost tick compensation */
+	delta = last_cyclone_low - delta;	
+	delta /= (CYCLONE_TIMER_FREQ/1000000);
+	delta += delay_at_last_interrupt;
+	lost = delta/(1000000/HZ);
+	delay = delta%(1000000/HZ);
+	if (lost >= 2)
+		jiffies_64 += lost-1;
+	
+	/* update the monotonic base value */
+	this_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low;
+	monotonic_base += (this_offset - last_offset) & CYCLONE_TIMER_MASK;
+	write_sequnlock(&monotonic_lock);
+
+	/* calculate delay_at_last_interrupt */
+	count = ((LATCH-1) - count) * TICK_SIZE;
+	delay_at_last_interrupt = (count + LATCH/2) / LATCH;
+
+
+	/* catch corner case where tick rollover occured 
+	 * between cyclone and pit reads (as noted when 
+	 * usec delta is > 90% # of usecs/tick)
+	 */
+	if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
+		jiffies_64++;
+}
+
+static unsigned long get_offset_cyclone(void)
+{
+	u32 offset;
+
+	if(!cyclone_timer)
+		return delay_at_last_interrupt;
+
+	/* Read the cyclone timer */
+	offset = cyclone_timer[0];
+
+	/* .. relative to previous jiffy */
+	offset = offset - last_cyclone_low;
+
+	/* convert cyclone ticks to microseconds */	
+	/* XXX slow, can we speed this up? */
+	offset = offset/(CYCLONE_TIMER_FREQ/1000000);
+
+	/* our adjusted time offset in microseconds */
+	return delay_at_last_interrupt + offset;
+}
+
+static unsigned long long monotonic_clock_cyclone(void)
+{
+	u32 now_low, now_high;
+	unsigned long long last_offset, this_offset, base;
+	unsigned long long ret;
+	unsigned seq;
+
+	/* atomically read monotonic base & last_offset */
+	do {
+		seq = read_seqbegin(&monotonic_lock);
+		last_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low;
+		base = monotonic_base;
+	} while (read_seqretry(&monotonic_lock, seq));
+
+
+	/* Read the cyclone counter */
+	read_cyclone_counter(now_low,now_high);
+	this_offset = ((unsigned long long)now_high<<32)|now_low;
+
+	/* convert to nanoseconds */
+	ret = base + ((this_offset - last_offset)&CYCLONE_TIMER_MASK);
+	return ret * (1000000000 / CYCLONE_TIMER_FREQ);
+}
+
+static int __init init_cyclone(char* override)
+{
+	u32* reg;	
+	u32 base;		/* saved cyclone base address */
+	u32 pageaddr;	/* page that contains cyclone_timer register */
+	u32 offset;		/* offset from pageaddr to cyclone_timer register */
+	int i;
+	
+	/* check clock override */
+	if (override[0] && strncmp(override,"cyclone",7))
+			return -ENODEV;
+
+	/*make sure we're on a summit box*/
+	if(!use_cyclone) return -ENODEV; 
+	
+	printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
+
+	/* find base address */
+	pageaddr = (CYCLONE_CBAR_ADDR)&PAGE_MASK;
+	offset = (CYCLONE_CBAR_ADDR)&(~PAGE_MASK);
+	set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr);
+	reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset);
+	if(!reg){
+		printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
+		return -ENODEV;
+	}
+	base = *reg;	
+	if(!base){
+		printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
+		return -ENODEV;
+	}
+	
+	/* setup PMCC */
+	pageaddr = (base + CYCLONE_PMCC_OFFSET)&PAGE_MASK;
+	offset = (base + CYCLONE_PMCC_OFFSET)&(~PAGE_MASK);
+	set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr);
+	reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset);
+	if(!reg){
+		printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
+		return -ENODEV;
+	}
+	reg[0] = 0x00000001;
+
+	/* setup MPCS */
+	pageaddr = (base + CYCLONE_MPCS_OFFSET)&PAGE_MASK;
+	offset = (base + CYCLONE_MPCS_OFFSET)&(~PAGE_MASK);
+	set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr);
+	reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset);
+	if(!reg){
+		printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
+		return -ENODEV;
+	}
+	reg[0] = 0x00000001;
+
+	/* map in cyclone_timer */
+	pageaddr = (base + CYCLONE_MPMC_OFFSET)&PAGE_MASK;
+	offset = (base + CYCLONE_MPMC_OFFSET)&(~PAGE_MASK);
+	set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr);
+	cyclone_timer = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset);
+	if(!cyclone_timer){
+		printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
+		return -ENODEV;
+	}
+
+	/*quick test to make sure its ticking*/
+	for(i=0; i<3; i++){
+		u32 old = cyclone_timer[0];
+		int stall = 100;
+		while(stall--) barrier();
+		if(cyclone_timer[0] == old){
+			printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
+			cyclone_timer = 0;
+			return -ENODEV;
+		}
+	}
+
+	init_cpu_khz();
+
+	/* Everything looks good! */
+	return 0;
+}
+
+
+static void delay_cyclone(unsigned long loops)
+{
+	unsigned long bclock, now;
+	if(!cyclone_timer)
+		return;
+	bclock = cyclone_timer[0];
+	do {
+		rep_nop();
+		now = cyclone_timer[0];
+	} while ((now-bclock) < loops);
+}
+/************************************************************/
+
+/* cyclone timer_opts struct */
+static struct timer_opts timer_cyclone = {
+	.name = "cyclone",
+	.mark_offset = mark_offset_cyclone, 
+	.get_offset = get_offset_cyclone,
+	.monotonic_clock =	monotonic_clock_cyclone,
+	.delay = delay_cyclone,
+};
+
+struct init_timer_opts __initdata timer_cyclone_init = {
+	.init = init_cyclone,
+	.opts = &timer_cyclone,
+};
diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c
new file mode 100644
index 000000000000..713134e71844
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_hpet.c
@@ -0,0 +1,191 @@
+/*
+ * This code largely moved from arch/i386/kernel/time.c.
+ * See comments there for proper credits.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+
+#include <asm/timer.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "io_ports.h"
+#include "mach_timer.h"
+#include <asm/hpet.h>
+
+static unsigned long hpet_usec_quotient;	/* convert hpet clks to usec */
+static unsigned long tsc_hpet_quotient;		/* convert tsc to hpet clks */
+static unsigned long hpet_last; 	/* hpet counter value at last tick*/
+static unsigned long last_tsc_low;	/* lsb 32 bits of Time Stamp Counter */
+static unsigned long last_tsc_high; 	/* msb 32 bits of Time Stamp Counter */
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+/* convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *		ns = cycles / (freq / ns_per_sec)
+ *		ns = cycles * (ns_per_sec / freq)
+ *		ns = cycles * (10^9 / (cpu_mhz * 10^6))
+ *		ns = cycles * (10^3 / cpu_mhz)
+ *
+ *	Then we use scaling math (suggested by george@mvista.com) to get:
+ *		ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ *		ns = cycles * cyc2ns_scale / SC
+ *
+ *	And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+static unsigned long cyc2ns_scale;
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+{
+	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+static unsigned long long monotonic_clock_hpet(void)
+{
+	unsigned long long last_offset, this_offset, base;
+	unsigned seq;
+
+	/* atomically read monotonic base & last_offset */
+	do {
+		seq = read_seqbegin(&monotonic_lock);
+		last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+		base = monotonic_base;
+	} while (read_seqretry(&monotonic_lock, seq));
+
+	/* Read the Time Stamp Counter */
+	rdtscll(this_offset);
+
+	/* return the value in ns */
+	return base + cycles_2_ns(this_offset - last_offset);
+}
+
+static unsigned long get_offset_hpet(void)
+{
+	register unsigned long eax, edx;
+
+	eax = hpet_readl(HPET_COUNTER);
+	eax -= hpet_last;	/* hpet delta */
+
+	/*
+         * Time offset = (hpet delta) * ( usecs per HPET clock )
+	 *             = (hpet delta) * ( usecs per tick / HPET clocks per tick)
+	 *             = (hpet delta) * ( hpet_usec_quotient ) / (2^32)
+	 *
+	 * Where,
+	 * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
+	 *
+	 * Using a mull instead of a divl saves some cycles in critical path.
+         */
+	ASM_MUL64_REG(eax, edx, hpet_usec_quotient, eax);
+
+	/* our adjusted time offset in microseconds */
+	return edx;
+}
+
+static void mark_offset_hpet(void)
+{
+	unsigned long long this_offset, last_offset;
+	unsigned long offset;
+
+	write_seqlock(&monotonic_lock);
+	last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	rdtsc(last_tsc_low, last_tsc_high);
+
+	offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+	if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))) {
+		int lost_ticks = (offset - hpet_last) / hpet_tick;
+		jiffies_64 += lost_ticks;
+	}
+	hpet_last = offset;
+
+	/* update the monotonic base value */
+	this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	monotonic_base += cycles_2_ns(this_offset - last_offset);
+	write_sequnlock(&monotonic_lock);
+}
+
+static void delay_hpet(unsigned long loops)
+{
+	unsigned long hpet_start, hpet_end;
+	unsigned long eax;
+
+	/* loops is the number of cpu cycles. Convert it to hpet clocks */
+	ASM_MUL64_REG(eax, loops, tsc_hpet_quotient, loops);
+
+	hpet_start = hpet_readl(HPET_COUNTER);
+	do {
+		rep_nop();
+		hpet_end = hpet_readl(HPET_COUNTER);
+	} while ((hpet_end - hpet_start) < (loops));
+}
+
+static int __init init_hpet(char* override)
+{
+	unsigned long result, remain;
+
+	/* check clock override */
+	if (override[0] && strncmp(override,"hpet",4))
+		return -ENODEV;
+
+	if (!is_hpet_enabled())
+		return -ENODEV;
+
+	printk("Using HPET for gettimeofday\n");
+	if (cpu_has_tsc) {
+		unsigned long tsc_quotient = calibrate_tsc_hpet(&tsc_hpet_quotient);
+		if (tsc_quotient) {
+			/* report CPU clock rate in Hz.
+			 * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+			 * clock/second. Our precision is about 100 ppm.
+			 */
+			{	unsigned long eax=0, edx=1000;
+				ASM_DIV64_REG(cpu_khz, edx, tsc_quotient,
+						eax, edx);
+				printk("Detected %lu.%03lu MHz processor.\n",
+					cpu_khz / 1000, cpu_khz % 1000);
+			}
+			set_cyc2ns_scale(cpu_khz/1000);
+		}
+	}
+
+	/*
+	 * Math to calculate hpet to usec multiplier
+	 * Look for the comments at get_offset_hpet()
+	 */
+	ASM_DIV64_REG(result, remain, hpet_tick, 0, KERNEL_TICK_USEC);
+	if (remain > (hpet_tick >> 1))
+		result++; /* rounding the result */
+	hpet_usec_quotient = result;
+
+	return 0;
+}
+
+/************************************************************/
+
+/* tsc timer_opts struct */
+static struct timer_opts timer_hpet = {
+	.name = 		"hpet",
+	.mark_offset =		mark_offset_hpet,
+	.get_offset =		get_offset_hpet,
+	.monotonic_clock =	monotonic_clock_hpet,
+	.delay = 		delay_hpet,
+};
+
+struct init_timer_opts __initdata timer_hpet_init = {
+	.init =	init_hpet,
+	.opts = &timer_hpet,
+};
diff --git a/arch/i386/kernel/timers/timer_none.c b/arch/i386/kernel/timers/timer_none.c
new file mode 100644
index 000000000000..4ea2f414dbbd
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_none.c
@@ -0,0 +1,39 @@
+#include <linux/init.h>
+#include <asm/timer.h>
+
+static void mark_offset_none(void)
+{
+	/* nothing needed */
+}
+
+static unsigned long get_offset_none(void)
+{
+	return 0;
+}
+
+static unsigned long long monotonic_clock_none(void)
+{
+	return 0;
+}
+
+static void delay_none(unsigned long loops)
+{
+	int d0;
+	__asm__ __volatile__(
+		"\tjmp 1f\n"
+		".align 16\n"
+		"1:\tjmp 2f\n"
+		".align 16\n"
+		"2:\tdecl %0\n\tjns 2b"
+		:"=&a" (d0)
+		:"0" (loops));
+}
+
+/* none timer_opts struct */
+struct timer_opts timer_none = {
+	.name = 	"none",
+	.mark_offset =	mark_offset_none, 
+	.get_offset =	get_offset_none,
+	.monotonic_clock =	monotonic_clock_none,
+	.delay = delay_none,
+};
diff --git a/arch/i386/kernel/timers/timer_pit.c b/arch/i386/kernel/timers/timer_pit.c
new file mode 100644
index 000000000000..967d5453cd0e
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_pit.c
@@ -0,0 +1,206 @@
+/*
+ * This code largely moved from arch/i386/kernel/time.c.
+ * See comments there for proper credits.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+#include <linux/timex.h>
+#include <asm/delay.h>
+#include <asm/mpspec.h>
+#include <asm/timer.h>
+#include <asm/smp.h>
+#include <asm/io.h>
+#include <asm/arch_hooks.h>
+
+extern spinlock_t i8259A_lock;
+extern spinlock_t i8253_lock;
+#include "do_timer.h"
+#include "io_ports.h"
+
+static int count_p; /* counter in get_offset_pit() */
+
+static int __init init_pit(char* override)
+{
+ 	/* check clock override */
+ 	if (override[0] && strncmp(override,"pit",3))
+ 		printk(KERN_ERR "Warning: clock= override failed. Defaulting to PIT\n");
+ 
+	count_p = LATCH;
+	return 0;
+}
+
+static void mark_offset_pit(void)
+{
+	/* nothing needed */
+}
+
+static unsigned long long monotonic_clock_pit(void)
+{
+	return 0;
+}
+
+static void delay_pit(unsigned long loops)
+{
+	int d0;
+	__asm__ __volatile__(
+		"\tjmp 1f\n"
+		".align 16\n"
+		"1:\tjmp 2f\n"
+		".align 16\n"
+		"2:\tdecl %0\n\tjns 2b"
+		:"=&a" (d0)
+		:"0" (loops));
+}
+
+
+/* This function must be called with xtime_lock held.
+ * It was inspired by Steve McCanne's microtime-i386 for BSD.  -- jrs
+ * 
+ * However, the pc-audio speaker driver changes the divisor so that
+ * it gets interrupted rather more often - it loads 64 into the
+ * counter rather than 11932! This has an adverse impact on
+ * do_gettimeoffset() -- it stops working! What is also not
+ * good is that the interval that our timer function gets called
+ * is no longer 10.0002 ms, but 9.9767 ms. To get around this
+ * would require using a different timing source. Maybe someone
+ * could use the RTC - I know that this can interrupt at frequencies
+ * ranging from 8192Hz to 2Hz. If I had the energy, I'd somehow fix
+ * it so that at startup, the timer code in sched.c would select
+ * using either the RTC or the 8253 timer. The decision would be
+ * based on whether there was any other device around that needed
+ * to trample on the 8253. I'd set up the RTC to interrupt at 1024 Hz,
+ * and then do some jiggery to have a version of do_timer that 
+ * advanced the clock by 1/1024 s. Every time that reached over 1/100
+ * of a second, then do all the old code. If the time was kept correct
+ * then do_gettimeoffset could just return 0 - there is no low order
+ * divider that can be accessed.
+ *
+ * Ideally, you would be able to use the RTC for the speaker driver,
+ * but it appears that the speaker driver really needs interrupt more
+ * often than every 120 us or so.
+ *
+ * Anyway, this needs more thought....		pjsg (1993-08-28)
+ * 
+ * If you are really that interested, you should be reading
+ * comp.protocols.time.ntp!
+ */
+
+static unsigned long get_offset_pit(void)
+{
+	int count;
+	unsigned long flags;
+	static unsigned long jiffies_p = 0;
+
+	/*
+	 * cache volatile jiffies temporarily; we have xtime_lock. 
+	 */
+	unsigned long jiffies_t;
+
+	spin_lock_irqsave(&i8253_lock, flags);
+	/* timer count may underflow right here */
+	outb_p(0x00, PIT_MODE);	/* latch the count ASAP */
+
+	count = inb_p(PIT_CH0);	/* read the latched count */
+
+	/*
+	 * We do this guaranteed double memory access instead of a _p 
+	 * postfix in the previous port access. Wheee, hackady hack
+	 */
+ 	jiffies_t = jiffies;
+
+	count |= inb_p(PIT_CH0) << 8;
+	
+        /* VIA686a test code... reset the latch if count > max + 1 */
+        if (count > LATCH) {
+                outb_p(0x34, PIT_MODE);
+                outb_p(LATCH & 0xff, PIT_CH0);
+                outb(LATCH >> 8, PIT_CH0);
+                count = LATCH - 1;
+        }
+	
+	/*
+	 * avoiding timer inconsistencies (they are rare, but they happen)...
+	 * there are two kinds of problems that must be avoided here:
+	 *  1. the timer counter underflows
+	 *  2. hardware problem with the timer, not giving us continuous time,
+	 *     the counter does small "jumps" upwards on some Pentium systems,
+	 *     (see c't 95/10 page 335 for Neptun bug.)
+	 */
+
+	if( jiffies_t == jiffies_p ) {
+		if( count > count_p ) {
+			/* the nutcase */
+			count = do_timer_overflow(count);
+		}
+	} else
+		jiffies_p = jiffies_t;
+
+	count_p = count;
+
+	spin_unlock_irqrestore(&i8253_lock, flags);
+
+	count = ((LATCH-1) - count) * TICK_SIZE;
+	count = (count + LATCH/2) / LATCH;
+
+	return count;
+}
+
+
+/* tsc timer_opts struct */
+struct timer_opts timer_pit = {
+	.name = "pit",
+	.mark_offset = mark_offset_pit, 
+	.get_offset = get_offset_pit,
+	.monotonic_clock = monotonic_clock_pit,
+	.delay = delay_pit,
+};
+
+struct init_timer_opts __initdata timer_pit_init = {
+	.init = init_pit, 
+	.opts = &timer_pit,
+};
+
+void setup_pit_timer(void)
+{
+	extern spinlock_t i8253_lock;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8253_lock, flags);
+	outb_p(0x34,PIT_MODE);		/* binary, mode 2, LSB/MSB, ch 0 */
+	udelay(10);
+	outb_p(LATCH & 0xff , PIT_CH0);	/* LSB */
+	udelay(10);
+	outb(LATCH >> 8 , PIT_CH0);	/* MSB */
+	spin_unlock_irqrestore(&i8253_lock, flags);
+}
+
+static int timer_resume(struct sys_device *dev)
+{
+	setup_pit_timer();
+	return 0;
+}
+
+static struct sysdev_class timer_sysclass = {
+	set_kset_name("timer_pit"),
+	.resume	= timer_resume,
+};
+
+static struct sys_device device_timer = {
+	.id	= 0,
+	.cls	= &timer_sysclass,
+};
+
+static int __init init_timer_sysfs(void)
+{
+	int error = sysdev_class_register(&timer_sysclass);
+	if (!error)
+		error = sysdev_register(&device_timer);
+	return error;
+}
+
+device_initcall(init_timer_sysfs);
+
diff --git a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c
new file mode 100644
index 000000000000..d77f22030fe6
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_pm.c
@@ -0,0 +1,258 @@
+/*
+ * (C) Dominik Brodowski <linux@brodo.de> 2003
+ *
+ * Driver to use the Power Management Timer (PMTMR) available in some
+ * southbridges as primary timing source for the Linux kernel.
+ *
+ * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
+ * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
+ *
+ * This file is licensed under the GPL v2.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <asm/types.h>
+#include <asm/timer.h>
+#include <asm/smp.h>
+#include <asm/io.h>
+#include <asm/arch_hooks.h>
+
+#include <linux/timex.h>
+#include "mach_timer.h"
+
+/* Number of PMTMR ticks expected during calibration run */
+#define PMTMR_TICKS_PER_SEC 3579545
+#define PMTMR_EXPECTED_RATE \
+  ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10))
+
+
+/* The I/O port the PMTMR resides at.
+ * The location is detected during setup_arch(),
+ * in arch/i386/acpi/boot.c */
+u32 pmtmr_ioport = 0;
+
+
+/* value of the Power timer at last timer interrupt */
+static u32 offset_tick;
+static u32 offset_delay;
+
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */
+
+/*helper function to safely read acpi pm timesource*/
+static inline u32 read_pmtmr(void)
+{
+	u32 v1=0,v2=0,v3=0;
+	/* It has been reported that because of various broken
+	 * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time
+	 * source is not latched, so you must read it multiple
+	 * times to insure a safe value is read.
+	 */
+	do {
+		v1 = inl(pmtmr_ioport);
+		v2 = inl(pmtmr_ioport);
+		v3 = inl(pmtmr_ioport);
+	} while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
+			|| (v3 > v1 && v3 < v2));
+
+	/* mask the output to 24 bits */
+	return v2 & ACPI_PM_MASK;
+}
+
+
+/*
+ * Some boards have the PMTMR running way too fast. We check
+ * the PMTMR rate against PIT channel 2 to catch these cases.
+ */
+static int verify_pmtmr_rate(void)
+{
+	u32 value1, value2;
+	unsigned long count, delta;
+
+	mach_prepare_counter();
+	value1 = read_pmtmr();
+	mach_countup(&count);
+	value2 = read_pmtmr();
+	delta = (value2 - value1) & ACPI_PM_MASK;
+
+	/* Check that the PMTMR delta is within 5% of what we expect */
+	if (delta < (PMTMR_EXPECTED_RATE * 19) / 20 ||
+	    delta > (PMTMR_EXPECTED_RATE * 21) / 20) {
+		printk(KERN_INFO "PM-Timer running at invalid rate: %lu%% of normal - aborting.\n", 100UL * delta / PMTMR_EXPECTED_RATE);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+static int init_pmtmr(char* override)
+{
+	u32 value1, value2;
+	unsigned int i;
+
+ 	if (override[0] && strncmp(override,"pmtmr",5))
+		return -ENODEV;
+
+	if (!pmtmr_ioport)
+		return -ENODEV;
+
+	/* we use the TSC for delay_pmtmr, so make sure it exists */
+	if (!cpu_has_tsc)
+		return -ENODEV;
+
+	/* "verify" this timing source */
+	value1 = read_pmtmr();
+	for (i = 0; i < 10000; i++) {
+		value2 = read_pmtmr();
+		if (value2 == value1)
+			continue;
+		if (value2 > value1)
+			goto pm_good;
+		if ((value2 < value1) && ((value2) < 0xFFF))
+			goto pm_good;
+		printk(KERN_INFO "PM-Timer had inconsistent results: 0x%#x, 0x%#x - aborting.\n", value1, value2);
+		return -EINVAL;
+	}
+	printk(KERN_INFO "PM-Timer had no reasonable result: 0x%#x - aborting.\n", value1);
+	return -ENODEV;
+
+pm_good:
+	if (verify_pmtmr_rate() != 0)
+		return -ENODEV;
+
+	init_cpu_khz();
+	return 0;
+}
+
+static inline u32 cyc2us(u32 cycles)
+{
+	/* The Power Management Timer ticks at 3.579545 ticks per microsecond.
+	 * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%]
+	 *
+	 * Even with HZ = 100, delta is at maximum 35796 ticks, so it can
+	 * easily be multiplied with 286 (=0x11E) without having to fear
+	 * u32 overflows.
+	 */
+	cycles *= 286;
+	return (cycles >> 10);
+}
+
+/*
+ * this gets called during each timer interrupt
+ *   - Called while holding the writer xtime_lock
+ */
+static void mark_offset_pmtmr(void)
+{
+	u32 lost, delta, last_offset;
+	static int first_run = 1;
+	last_offset = offset_tick;
+
+	write_seqlock(&monotonic_lock);
+
+	offset_tick = read_pmtmr();
+
+	/* calculate tick interval */
+	delta = (offset_tick - last_offset) & ACPI_PM_MASK;
+
+	/* convert to usecs */
+	delta = cyc2us(delta);
+
+	/* update the monotonic base value */
+	monotonic_base += delta * NSEC_PER_USEC;
+	write_sequnlock(&monotonic_lock);
+
+	/* convert to ticks */
+	delta += offset_delay;
+	lost = delta / (USEC_PER_SEC / HZ);
+	offset_delay = delta % (USEC_PER_SEC / HZ);
+
+
+	/* compensate for lost ticks */
+	if (lost >= 2)
+		jiffies_64 += lost - 1;
+
+	/* don't calculate delay for first run,
+	   or if we've got less then a tick */
+	if (first_run || (lost < 1)) {
+		first_run = 0;
+		offset_delay = 0;
+	}
+}
+
+
+static unsigned long long monotonic_clock_pmtmr(void)
+{
+	u32 last_offset, this_offset;
+	unsigned long long base, ret;
+	unsigned seq;
+
+
+	/* atomically read monotonic base & last_offset */
+	do {
+		seq = read_seqbegin(&monotonic_lock);
+		last_offset = offset_tick;
+		base = monotonic_base;
+	} while (read_seqretry(&monotonic_lock, seq));
+
+	/* Read the pmtmr */
+	this_offset =  read_pmtmr();
+
+	/* convert to nanoseconds */
+	ret = (this_offset - last_offset) & ACPI_PM_MASK;
+	ret = base + (cyc2us(ret) * NSEC_PER_USEC);
+	return ret;
+}
+
+static void delay_pmtmr(unsigned long loops)
+{
+	unsigned long bclock, now;
+
+	rdtscl(bclock);
+	do
+	{
+		rep_nop();
+		rdtscl(now);
+	} while ((now-bclock) < loops);
+}
+
+
+/*
+ * get the offset (in microseconds) from the last call to mark_offset()
+ *	- Called holding a reader xtime_lock
+ */
+static unsigned long get_offset_pmtmr(void)
+{
+	u32 now, offset, delta = 0;
+
+	offset = offset_tick;
+	now = read_pmtmr();
+	delta = (now - offset)&ACPI_PM_MASK;
+
+	return (unsigned long) offset_delay + cyc2us(delta);
+}
+
+
+/* acpi timer_opts struct */
+static struct timer_opts timer_pmtmr = {
+	.name			= "pmtmr",
+	.mark_offset		= mark_offset_pmtmr,
+	.get_offset		= get_offset_pmtmr,
+	.monotonic_clock 	= monotonic_clock_pmtmr,
+	.delay 			= delay_pmtmr,
+};
+
+struct init_timer_opts __initdata timer_pmtmr_init = {
+	.init = init_pmtmr,
+	.opts = &timer_pmtmr,
+};
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Power Management Timer (PMTMR) as primary timing source for x86");
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
new file mode 100644
index 000000000000..a685994e5c8e
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -0,0 +1,560 @@
+/*
+ * This code largely moved from arch/i386/kernel/time.c.
+ * See comments there for proper credits.
+ *
+ * 2004-06-25    Jesper Juhl
+ *      moved mark_offset_tsc below cpufreq_delayed_get to avoid gcc 3.4
+ *      failing to inline.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+
+#include <asm/timer.h>
+#include <asm/io.h>
+/* processor.h for distable_tsc flag */
+#include <asm/processor.h>
+
+#include "io_ports.h"
+#include "mach_timer.h"
+
+#include <asm/hpet.h>
+
+#ifdef CONFIG_HPET_TIMER
+static unsigned long hpet_usec_quotient;
+static unsigned long hpet_last;
+static struct timer_opts timer_tsc;
+#endif
+
+static inline void cpufreq_delayed_get(void);
+
+int tsc_disable __initdata = 0;
+
+extern spinlock_t i8253_lock;
+
+static int use_tsc;
+/* Number of usecs that the last interrupt was delayed */
+static int delay_at_last_interrupt;
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+/* convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *		ns = cycles / (freq / ns_per_sec)
+ *		ns = cycles * (ns_per_sec / freq)
+ *		ns = cycles * (10^9 / (cpu_mhz * 10^6))
+ *		ns = cycles * (10^3 / cpu_mhz)
+ *
+ *	Then we use scaling math (suggested by george@mvista.com) to get:
+ *		ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ *		ns = cycles * cyc2ns_scale / SC
+ *
+ *	And since SC is a constant power of two, we can convert the div
+ *  into a shift.   
+ *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+static unsigned long cyc2ns_scale; 
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+{
+	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+static int count2; /* counter for mark_offset_tsc() */
+
+/* Cached *multiplier* to convert TSC counts to microseconds.
+ * (see the equation below).
+ * Equal to 2^32 * (1 / (clocks per usec) ).
+ * Initialized in time_init.
+ */
+static unsigned long fast_gettimeoffset_quotient;
+
+static unsigned long get_offset_tsc(void)
+{
+	register unsigned long eax, edx;
+
+	/* Read the Time Stamp Counter */
+
+	rdtsc(eax,edx);
+
+	/* .. relative to previous jiffy (32 bits is enough) */
+	eax -= last_tsc_low;	/* tsc_low delta */
+
+	/*
+         * Time offset = (tsc_low delta) * fast_gettimeoffset_quotient
+         *             = (tsc_low delta) * (usecs_per_clock)
+         *             = (tsc_low delta) * (usecs_per_jiffy / clocks_per_jiffy)
+	 *
+	 * Using a mull instead of a divl saves up to 31 clock cycles
+	 * in the critical path.
+         */
+
+	__asm__("mull %2"
+		:"=a" (eax), "=d" (edx)
+		:"rm" (fast_gettimeoffset_quotient),
+		 "0" (eax));
+
+	/* our adjusted time offset in microseconds */
+	return delay_at_last_interrupt + edx;
+}
+
+static unsigned long long monotonic_clock_tsc(void)
+{
+	unsigned long long last_offset, this_offset, base;
+	unsigned seq;
+	
+	/* atomically read monotonic base & last_offset */
+	do {
+		seq = read_seqbegin(&monotonic_lock);
+		last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+		base = monotonic_base;
+	} while (read_seqretry(&monotonic_lock, seq));
+
+	/* Read the Time Stamp Counter */
+	rdtscll(this_offset);
+
+	/* return the value in ns */
+	return base + cycles_2_ns(this_offset - last_offset);
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+	unsigned long long this_offset;
+
+	/*
+	 * In the NUMA case we dont use the TSC as they are not
+	 * synchronized across all CPUs.
+	 */
+#ifndef CONFIG_NUMA
+	if (!use_tsc)
+#endif
+		/* no locking but a rare wrong value is not a big deal */
+		return jiffies_64 * (1000000000 / HZ);
+
+	/* Read the Time Stamp Counter */
+	rdtscll(this_offset);
+
+	/* return the value in ns */
+	return cycles_2_ns(this_offset);
+}
+
+static void delay_tsc(unsigned long loops)
+{
+	unsigned long bclock, now;
+	
+	rdtscl(bclock);
+	do
+	{
+		rep_nop();
+		rdtscl(now);
+	} while ((now-bclock) < loops);
+}
+
+#ifdef CONFIG_HPET_TIMER
+static void mark_offset_tsc_hpet(void)
+{
+	unsigned long long this_offset, last_offset;
+ 	unsigned long offset, temp, hpet_current;
+
+	write_seqlock(&monotonic_lock);
+	last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	/*
+	 * It is important that these two operations happen almost at
+	 * the same time. We do the RDTSC stuff first, since it's
+	 * faster. To avoid any inconsistencies, we need interrupts
+	 * disabled locally.
+	 */
+	/*
+	 * Interrupts are just disabled locally since the timer irq
+	 * has the SA_INTERRUPT flag set. -arca
+	 */
+	/* read Pentium cycle counter */
+
+	hpet_current = hpet_readl(HPET_COUNTER);
+	rdtsc(last_tsc_low, last_tsc_high);
+
+	/* lost tick compensation */
+	offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+	if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))) {
+		int lost_ticks = (offset - hpet_last) / hpet_tick;
+		jiffies_64 += lost_ticks;
+	}
+	hpet_last = hpet_current;
+
+	/* update the monotonic base value */
+	this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	monotonic_base += cycles_2_ns(this_offset - last_offset);
+	write_sequnlock(&monotonic_lock);
+
+	/* calculate delay_at_last_interrupt */
+	/*
+	 * Time offset = (hpet delta) * ( usecs per HPET clock )
+	 *             = (hpet delta) * ( usecs per tick / HPET clocks per tick)
+	 *             = (hpet delta) * ( hpet_usec_quotient ) / (2^32)
+	 * Where,
+	 * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
+	 */
+	delay_at_last_interrupt = hpet_current - offset;
+	ASM_MUL64_REG(temp, delay_at_last_interrupt,
+			hpet_usec_quotient, delay_at_last_interrupt);
+}
+#endif
+
+
+#ifdef CONFIG_CPU_FREQ
+#include <linux/workqueue.h>
+
+static unsigned int cpufreq_delayed_issched = 0;
+static unsigned int cpufreq_init = 0;
+static struct work_struct cpufreq_delayed_get_work;
+
+static void handle_cpufreq_delayed_get(void *v)
+{
+	unsigned int cpu;
+	for_each_online_cpu(cpu) {
+		cpufreq_get(cpu);
+	}
+	cpufreq_delayed_issched = 0;
+}
+
+/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries
+ * to verify the CPU frequency the timing core thinks the CPU is running
+ * at is still correct.
+ */
+static inline void cpufreq_delayed_get(void) 
+{
+	if (cpufreq_init && !cpufreq_delayed_issched) {
+		cpufreq_delayed_issched = 1;
+		printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n");
+		schedule_work(&cpufreq_delayed_get_work);
+	}
+}
+
+/* If the CPU frequency is scaled, TSC-based delays will need a different
+ * loops_per_jiffy value to function properly.
+ */
+
+static unsigned int  ref_freq = 0;
+static unsigned long loops_per_jiffy_ref = 0;
+
+#ifndef CONFIG_SMP
+static unsigned long fast_gettimeoffset_ref = 0;
+static unsigned long cpu_khz_ref = 0;
+#endif
+
+static int
+time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+		       void *data)
+{
+	struct cpufreq_freqs *freq = data;
+
+	if (val != CPUFREQ_RESUMECHANGE)
+		write_seqlock_irq(&xtime_lock);
+	if (!ref_freq) {
+		ref_freq = freq->old;
+		loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
+#ifndef CONFIG_SMP
+		fast_gettimeoffset_ref = fast_gettimeoffset_quotient;
+		cpu_khz_ref = cpu_khz;
+#endif
+	}
+
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+	    (val == CPUFREQ_RESUMECHANGE)) {
+		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+			cpu_data[freq->cpu].loops_per_jiffy = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+#ifndef CONFIG_SMP
+		if (cpu_khz)
+			cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new);
+		if (use_tsc) {
+			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
+				fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
+				set_cyc2ns_scale(cpu_khz/1000);
+			}
+		}
+#endif
+	}
+
+	if (val != CPUFREQ_RESUMECHANGE)
+		write_sequnlock_irq(&xtime_lock);
+
+	return 0;
+}
+
+static struct notifier_block time_cpufreq_notifier_block = {
+	.notifier_call	= time_cpufreq_notifier
+};
+
+
+static int __init cpufreq_tsc(void)
+{
+	int ret;
+	INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL);
+	ret = cpufreq_register_notifier(&time_cpufreq_notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (!ret)
+		cpufreq_init = 1;
+	return ret;
+}
+core_initcall(cpufreq_tsc);
+
+#else /* CONFIG_CPU_FREQ */
+static inline void cpufreq_delayed_get(void) { return; }
+#endif 
+
+static void mark_offset_tsc(void)
+{
+	unsigned long lost,delay;
+	unsigned long delta = last_tsc_low;
+	int count;
+	int countmp;
+	static int count1 = 0;
+	unsigned long long this_offset, last_offset;
+	static int lost_count = 0;
+
+	write_seqlock(&monotonic_lock);
+	last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	/*
+	 * It is important that these two operations happen almost at
+	 * the same time. We do the RDTSC stuff first, since it's
+	 * faster. To avoid any inconsistencies, we need interrupts
+	 * disabled locally.
+	 */
+
+	/*
+	 * Interrupts are just disabled locally since the timer irq
+	 * has the SA_INTERRUPT flag set. -arca
+	 */
+
+	/* read Pentium cycle counter */
+
+	rdtsc(last_tsc_low, last_tsc_high);
+
+	spin_lock(&i8253_lock);
+	outb_p(0x00, PIT_MODE);     /* latch the count ASAP */
+
+	count = inb_p(PIT_CH0);    /* read the latched count */
+	count |= inb(PIT_CH0) << 8;
+
+	/*
+	 * VIA686a test code... reset the latch if count > max + 1
+	 * from timer_pit.c - cjb
+	 */
+	if (count > LATCH) {
+		outb_p(0x34, PIT_MODE);
+		outb_p(LATCH & 0xff, PIT_CH0);
+		outb(LATCH >> 8, PIT_CH0);
+		count = LATCH - 1;
+	}
+
+	spin_unlock(&i8253_lock);
+
+	if (pit_latch_buggy) {
+		/* get center value of last 3 time lutch */
+		if ((count2 >= count && count >= count1)
+		    || (count1 >= count && count >= count2)) {
+			count2 = count1; count1 = count;
+		} else if ((count1 >= count2 && count2 >= count)
+			   || (count >= count2 && count2 >= count1)) {
+			countmp = count;count = count2;
+			count2 = count1;count1 = countmp;
+		} else {
+			count2 = count1; count1 = count; count = count1;
+		}
+	}
+
+	/* lost tick compensation */
+	delta = last_tsc_low - delta;
+	{
+		register unsigned long eax, edx;
+		eax = delta;
+		__asm__("mull %2"
+		:"=a" (eax), "=d" (edx)
+		:"rm" (fast_gettimeoffset_quotient),
+		 "0" (eax));
+		delta = edx;
+	}
+	delta += delay_at_last_interrupt;
+	lost = delta/(1000000/HZ);
+	delay = delta%(1000000/HZ);
+	if (lost >= 2) {
+		jiffies_64 += lost-1;
+
+		/* sanity check to ensure we're not always losing ticks */
+		if (lost_count++ > 100) {
+			printk(KERN_WARNING "Losing too many ticks!\n");
+			printk(KERN_WARNING "TSC cannot be used as a timesource.  \n");
+			printk(KERN_WARNING "Possible reasons for this are:\n");
+			printk(KERN_WARNING "  You're running with Speedstep,\n");
+			printk(KERN_WARNING "  You don't have DMA enabled for your hard disk (see hdparm),\n");
+			printk(KERN_WARNING "  Incorrect TSC synchronization on an SMP system (see dmesg).\n");
+			printk(KERN_WARNING "Falling back to a sane timesource now.\n");
+
+			clock_fallback();
+		}
+		/* ... but give the TSC a fair chance */
+		if (lost_count > 25)
+			cpufreq_delayed_get();
+	} else
+		lost_count = 0;
+	/* update the monotonic base value */
+	this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+	monotonic_base += cycles_2_ns(this_offset - last_offset);
+	write_sequnlock(&monotonic_lock);
+
+	/* calculate delay_at_last_interrupt */
+	count = ((LATCH-1) - count) * TICK_SIZE;
+	delay_at_last_interrupt = (count + LATCH/2) / LATCH;
+
+	/* catch corner case where tick rollover occured
+	 * between tsc and pit reads (as noted when
+	 * usec delta is > 90% # of usecs/tick)
+	 */
+	if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
+		jiffies_64++;
+}
+
+static int __init init_tsc(char* override)
+{
+
+	/* check clock override */
+	if (override[0] && strncmp(override,"tsc",3)) {
+#ifdef CONFIG_HPET_TIMER
+		if (is_hpet_enabled()) {
+			printk(KERN_ERR "Warning: clock= override failed. Defaulting to tsc\n");
+		} else
+#endif
+		{
+			return -ENODEV;
+		}
+	}
+
+	/*
+	 * If we have APM enabled or the CPU clock speed is variable
+	 * (CPU stops clock on HLT or slows clock to save power)
+	 * then the TSC timestamps may diverge by up to 1 jiffy from
+	 * 'real time' but nothing will break.
+	 * The most frequent case is that the CPU is "woken" from a halt
+	 * state by the timer interrupt itself, so we get 0 error. In the
+	 * rare cases where a driver would "wake" the CPU and request a
+	 * timestamp, the maximum error is < 1 jiffy. But timestamps are
+	 * still perfectly ordered.
+	 * Note that the TSC counter will be reset if APM suspends
+	 * to disk; this won't break the kernel, though, 'cuz we're
+	 * smart.  See arch/i386/kernel/apm.c.
+	 */
+ 	/*
+ 	 *	Firstly we have to do a CPU check for chips with
+ 	 * 	a potentially buggy TSC. At this point we haven't run
+ 	 *	the ident/bugs checks so we must run this hook as it
+ 	 *	may turn off the TSC flag.
+ 	 *
+ 	 *	NOTE: this doesn't yet handle SMP 486 machines where only
+ 	 *	some CPU's have a TSC. Thats never worked and nobody has
+ 	 *	moaned if you have the only one in the world - you fix it!
+ 	 */
+
+	count2 = LATCH; /* initialize counter for mark_offset_tsc() */
+
+	if (cpu_has_tsc) {
+		unsigned long tsc_quotient;
+#ifdef CONFIG_HPET_TIMER
+		if (is_hpet_enabled()){
+			unsigned long result, remain;
+			printk("Using TSC for gettimeofday\n");
+			tsc_quotient = calibrate_tsc_hpet(NULL);
+			timer_tsc.mark_offset = &mark_offset_tsc_hpet;
+			/*
+			 * Math to calculate hpet to usec multiplier
+			 * Look for the comments at get_offset_tsc_hpet()
+			 */
+			ASM_DIV64_REG(result, remain, hpet_tick,
+					0, KERNEL_TICK_USEC);
+			if (remain > (hpet_tick >> 1))
+				result++; /* rounding the result */
+
+			hpet_usec_quotient = result;
+		} else
+#endif
+		{
+			tsc_quotient = calibrate_tsc();
+		}
+
+		if (tsc_quotient) {
+			fast_gettimeoffset_quotient = tsc_quotient;
+			use_tsc = 1;
+			/*
+			 *	We could be more selective here I suspect
+			 *	and just enable this for the next intel chips ?
+			 */
+			/* report CPU clock rate in Hz.
+			 * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+			 * clock/second. Our precision is about 100 ppm.
+			 */
+			{	unsigned long eax=0, edx=1000;
+				__asm__("divl %2"
+		       		:"=a" (cpu_khz), "=d" (edx)
+        	       		:"r" (tsc_quotient),
+	                	"0" (eax), "1" (edx));
+				printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000);
+			}
+			set_cyc2ns_scale(cpu_khz/1000);
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
+#ifndef CONFIG_X86_TSC
+/* disable flag for tsc.  Takes effect by clearing the TSC cpu flag
+ * in cpu/common.c */
+static int __init tsc_setup(char *str)
+{
+	tsc_disable = 1;
+	return 1;
+}
+#else
+static int __init tsc_setup(char *str)
+{
+	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
+				"cannot disable TSC.\n");
+	return 1;
+}
+#endif
+__setup("notsc", tsc_setup);
+
+
+
+/************************************************************/
+
+/* tsc timer_opts struct */
+static struct timer_opts timer_tsc = {
+	.name = "tsc",
+	.mark_offset = mark_offset_tsc, 
+	.get_offset = get_offset_tsc,
+	.monotonic_clock = monotonic_clock_tsc,
+	.delay = delay_tsc,
+};
+
+struct init_timer_opts __initdata timer_tsc_init = {
+	.init = init_tsc,
+	.opts = &timer_tsc,
+};
diff --git a/arch/i386/kernel/trampoline.S b/arch/i386/kernel/trampoline.S
new file mode 100644
index 000000000000..fcce0e61b0e7
--- /dev/null
+++ b/arch/i386/kernel/trampoline.S
@@ -0,0 +1,80 @@
+/*
+ *
+ *	Trampoline.S	Derived from Setup.S by Linus Torvalds
+ *
+ *	4 Jan 1997 Michael Chastain: changed to gnu as.
+ *
+ *	This is only used for booting secondary CPUs in SMP machine
+ *
+ *	Entry: CS:IP point to the start of our code, we are 
+ *	in real mode with no stack, but the rest of the 
+ *	trampoline page to make our stack and everything else
+ *	is a mystery.
+ *
+ *	In fact we don't actually need a stack so we don't
+ *	set one up.
+ *
+ *	We jump into the boot/compressed/head.S code. So you'd
+ *	better be running a compressed kernel image or you
+ *	won't get very far.
+ *
+ *	On entry to trampoline_data, the processor is in real mode
+ *	with 16-bit addressing and 16-bit data.  CS has some value
+ *	and IP is zero.  Thus, data addresses need to be absolute
+ *	(no relocation) and are taken with regard to r_base.
+ *
+ *	If you work on this file, check the object module with
+ *	objdump --reloc to make sure there are no relocation
+ *	entries except for:
+ *
+ *	TYPE              VALUE
+ *	R_386_32          startup_32_smp
+ *	R_386_32          boot_gdt_table
+ */
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+
+.data
+
+.code16
+
+ENTRY(trampoline_data)
+r_base = .
+	wbinvd			# Needed for NUMA-Q should be harmless for others
+	mov	%cs, %ax	# Code and data in the same place
+	mov	%ax, %ds
+
+	cli			# We should be safe anyway
+
+	movl	$0xA5A5A5A5, trampoline_data - r_base
+				# write marker for master knows we're running
+
+	/* GDT tables in non default location kernel can be beyond 16MB and
+	 * lgdt will not be able to load the address as in real mode default
+	 * operand size is 16bit. Use lgdtl instead to force operand size
+	 * to 32 bit.
+	 */
+
+	lidtl	boot_idt - r_base	# load idt with 0, 0
+	lgdtl	boot_gdt - r_base	# load gdt with whatever is appropriate
+
+	xor	%ax, %ax
+	inc	%ax		# protected mode (PE) bit
+	lmsw	%ax		# into protected mode
+	# flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S
+	ljmpl	$__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET)
+
+	# These need to be in the same 64K segment as the above;
+	# hence we don't use the boot_gdt_descr defined in head.S
+boot_gdt:
+	.word	__BOOT_DS + 7			# gdt limit
+	.long	boot_gdt_table-__PAGE_OFFSET	# gdt base
+
+boot_idt:
+	.word	0				# idt limit = 0
+	.long	0				# idt base = 0L
+
+.globl trampoline_end
+trampoline_end:
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
new file mode 100644
index 000000000000..6c0e383915b6
--- /dev/null
+++ b/arch/i386/kernel/traps.c
@@ -0,0 +1,1084 @@
+/*
+ *  linux/arch/i386/traps.c
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ *  Pentium III FXSR, SSE support
+ *	Gareth Hughes <gareth@valinux.com>, May 2000
+ */
+
+/*
+ * 'Traps.c' handles hardware traps and faults after we have saved some
+ * state in 'asm.s'.
+ */
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <linux/kallsyms.h>
+#include <linux/ptrace.h>
+#include <linux/utsname.h>
+#include <linux/kprobes.h>
+
+#ifdef CONFIG_EISA
+#include <linux/ioport.h>
+#include <linux/eisa.h>
+#endif
+
+#ifdef CONFIG_MCA
+#include <linux/mca.h>
+#endif
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/debugreg.h>
+#include <asm/desc.h>
+#include <asm/i387.h>
+#include <asm/nmi.h>
+
+#include <asm/smp.h>
+#include <asm/arch_hooks.h>
+#include <asm/kdebug.h>
+
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include "mach_traps.h"
+
+asmlinkage int system_call(void);
+
+struct desc_struct default_ldt[] = { { 0, 0 }, { 0, 0 }, { 0, 0 },
+		{ 0, 0 }, { 0, 0 } };
+
+/* Do we ignore FPU interrupts ? */
+char ignore_fpu_irq = 0;
+
+/*
+ * The IDT has to be page-aligned to simplify the Pentium
+ * F0 0F bug workaround.. We have a special link segment
+ * for this.
+ */
+struct desc_struct idt_table[256] __attribute__((__section__(".data.idt"))) = { {0, 0}, };
+
+asmlinkage void divide_error(void);
+asmlinkage void debug(void);
+asmlinkage void nmi(void);
+asmlinkage void int3(void);
+asmlinkage void overflow(void);
+asmlinkage void bounds(void);
+asmlinkage void invalid_op(void);
+asmlinkage void device_not_available(void);
+asmlinkage void coprocessor_segment_overrun(void);
+asmlinkage void invalid_TSS(void);
+asmlinkage void segment_not_present(void);
+asmlinkage void stack_segment(void);
+asmlinkage void general_protection(void);
+asmlinkage void page_fault(void);
+asmlinkage void coprocessor_error(void);
+asmlinkage void simd_coprocessor_error(void);
+asmlinkage void alignment_check(void);
+asmlinkage void spurious_interrupt_bug(void);
+asmlinkage void machine_check(void);
+
+static int kstack_depth_to_print = 24;
+struct notifier_block *i386die_chain;
+static DEFINE_SPINLOCK(die_notifier_lock);
+
+int register_die_notifier(struct notifier_block *nb)
+{
+	int err = 0;
+	unsigned long flags;
+	spin_lock_irqsave(&die_notifier_lock, flags);
+	err = notifier_chain_register(&i386die_chain, nb);
+	spin_unlock_irqrestore(&die_notifier_lock, flags);
+	return err;
+}
+
+static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
+{
+	return	p > (void *)tinfo &&
+		p < (void *)tinfo + THREAD_SIZE - 3;
+}
+
+static inline unsigned long print_context_stack(struct thread_info *tinfo,
+				unsigned long *stack, unsigned long ebp)
+{
+	unsigned long addr;
+
+#ifdef	CONFIG_FRAME_POINTER
+	while (valid_stack_ptr(tinfo, (void *)ebp)) {
+		addr = *(unsigned long *)(ebp + 4);
+		printk(" [<%08lx>] ", addr);
+		print_symbol("%s", addr);
+		printk("\n");
+		ebp = *(unsigned long *)ebp;
+	}
+#else
+	while (valid_stack_ptr(tinfo, stack)) {
+		addr = *stack++;
+		if (__kernel_text_address(addr)) {
+			printk(" [<%08lx>]", addr);
+			print_symbol(" %s", addr);
+			printk("\n");
+		}
+	}
+#endif
+	return ebp;
+}
+
+void show_trace(struct task_struct *task, unsigned long * stack)
+{
+	unsigned long ebp;
+
+	if (!task)
+		task = current;
+
+	if (task == current) {
+		/* Grab ebp right from our regs */
+		asm ("movl %%ebp, %0" : "=r" (ebp) : );
+	} else {
+		/* ebp is the last reg pushed by switch_to */
+		ebp = *(unsigned long *) task->thread.esp;
+	}
+
+	while (1) {
+		struct thread_info *context;
+		context = (struct thread_info *)
+			((unsigned long)stack & (~(THREAD_SIZE - 1)));
+		ebp = print_context_stack(context, stack, ebp);
+		stack = (unsigned long*)context->previous_esp;
+		if (!stack)
+			break;
+		printk(" =======================\n");
+	}
+}
+
+void show_stack(struct task_struct *task, unsigned long *esp)
+{
+	unsigned long *stack;
+	int i;
+
+	if (esp == NULL) {
+		if (task)
+			esp = (unsigned long*)task->thread.esp;
+		else
+			esp = (unsigned long *)&esp;
+	}
+
+	stack = esp;
+	for(i = 0; i < kstack_depth_to_print; i++) {
+		if (kstack_end(stack))
+			break;
+		if (i && ((i % 8) == 0))
+			printk("\n       ");
+		printk("%08lx ", *stack++);
+	}
+	printk("\nCall Trace:\n");
+	show_trace(task, esp);
+}
+
+/*
+ * The architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+	unsigned long stack;
+
+	show_trace(current, &stack);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void show_registers(struct pt_regs *regs)
+{
+	int i;
+	int in_kernel = 1;
+	unsigned long esp;
+	unsigned short ss;
+
+	esp = (unsigned long) (&regs->esp);
+	ss = __KERNEL_DS;
+	if (regs->xcs & 3) {
+		in_kernel = 0;
+		esp = regs->esp;
+		ss = regs->xss & 0xffff;
+	}
+	print_modules();
+	printk("CPU:    %d\nEIP:    %04x:[<%08lx>]    %s VLI\nEFLAGS: %08lx"
+			"   (%s) \n",
+		smp_processor_id(), 0xffff & regs->xcs, regs->eip,
+		print_tainted(), regs->eflags, system_utsname.release);
+	print_symbol("EIP is at %s\n", regs->eip);
+	printk("eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx\n",
+		regs->eax, regs->ebx, regs->ecx, regs->edx);
+	printk("esi: %08lx   edi: %08lx   ebp: %08lx   esp: %08lx\n",
+		regs->esi, regs->edi, regs->ebp, esp);
+	printk("ds: %04x   es: %04x   ss: %04x\n",
+		regs->xds & 0xffff, regs->xes & 0xffff, ss);
+	printk("Process %s (pid: %d, threadinfo=%p task=%p)",
+		current->comm, current->pid, current_thread_info(), current);
+	/*
+	 * When in-kernel, we also print out the stack and code at the
+	 * time of the fault..
+	 */
+	if (in_kernel) {
+		u8 *eip;
+
+		printk("\nStack: ");
+		show_stack(NULL, (unsigned long*)esp);
+
+		printk("Code: ");
+
+		eip = (u8 *)regs->eip - 43;
+		for (i = 0; i < 64; i++, eip++) {
+			unsigned char c;
+
+			if (eip < (u8 *)PAGE_OFFSET || __get_user(c, eip)) {
+				printk(" Bad EIP value.");
+				break;
+			}
+			if (eip == (u8 *)regs->eip)
+				printk("<%02x> ", c);
+			else
+				printk("%02x ", c);
+		}
+	}
+	printk("\n");
+}	
+
+static void handle_BUG(struct pt_regs *regs)
+{
+	unsigned short ud2;
+	unsigned short line;
+	char *file;
+	char c;
+	unsigned long eip;
+
+	if (regs->xcs & 3)
+		goto no_bug;		/* Not in kernel */
+
+	eip = regs->eip;
+
+	if (eip < PAGE_OFFSET)
+		goto no_bug;
+	if (__get_user(ud2, (unsigned short *)eip))
+		goto no_bug;
+	if (ud2 != 0x0b0f)
+		goto no_bug;
+	if (__get_user(line, (unsigned short *)(eip + 2)))
+		goto bug;
+	if (__get_user(file, (char **)(eip + 4)) ||
+		(unsigned long)file < PAGE_OFFSET || __get_user(c, file))
+		file = "<bad filename>";
+
+	printk("------------[ cut here ]------------\n");
+	printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line);
+
+no_bug:
+	return;
+
+	/* Here we know it was a BUG but file-n-line is unavailable */
+bug:
+	printk("Kernel BUG\n");
+}
+
+void die(const char * str, struct pt_regs * regs, long err)
+{
+	static struct {
+		spinlock_t lock;
+		u32 lock_owner;
+		int lock_owner_depth;
+	} die = {
+		.lock =			SPIN_LOCK_UNLOCKED,
+		.lock_owner =		-1,
+		.lock_owner_depth =	0
+	};
+	static int die_counter;
+
+	if (die.lock_owner != _smp_processor_id()) {
+		console_verbose();
+		spin_lock_irq(&die.lock);
+		die.lock_owner = smp_processor_id();
+		die.lock_owner_depth = 0;
+		bust_spinlocks(1);
+	}
+
+	if (++die.lock_owner_depth < 3) {
+		int nl = 0;
+		handle_BUG(regs);
+		printk(KERN_ALERT "%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
+#ifdef CONFIG_PREEMPT
+		printk("PREEMPT ");
+		nl = 1;
+#endif
+#ifdef CONFIG_SMP
+		printk("SMP ");
+		nl = 1;
+#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+		printk("DEBUG_PAGEALLOC");
+		nl = 1;
+#endif
+		if (nl)
+			printk("\n");
+	notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV);
+		show_registers(regs);
+  	} else
+		printk(KERN_ERR "Recursive die() failure, output suppressed\n");
+
+	bust_spinlocks(0);
+	die.lock_owner = -1;
+	spin_unlock_irq(&die.lock);
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops) {
+		printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+		ssleep(5);
+		panic("Fatal exception");
+	}
+	do_exit(SIGSEGV);
+}
+
+static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err)
+{
+	if (!(regs->eflags & VM_MASK) && !(3 & regs->xcs))
+		die(str, regs, err);
+}
+
+static void do_trap(int trapnr, int signr, char *str, int vm86,
+			   struct pt_regs * regs, long error_code, siginfo_t *info)
+{
+	if (regs->eflags & VM_MASK) {
+		if (vm86)
+			goto vm86_trap;
+		goto trap_signal;
+	}
+
+	if (!(regs->xcs & 3))
+		goto kernel_trap;
+
+	trap_signal: {
+		struct task_struct *tsk = current;
+		tsk->thread.error_code = error_code;
+		tsk->thread.trap_no = trapnr;
+		if (info)
+			force_sig_info(signr, info, tsk);
+		else
+			force_sig(signr, tsk);
+		return;
+	}
+
+	kernel_trap: {
+		if (!fixup_exception(regs))
+			die(str, regs, error_code);
+		return;
+	}
+
+	vm86_trap: {
+		int ret = handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, trapnr);
+		if (ret) goto trap_signal;
+		return;
+	}
+}
+
+#define DO_ERROR(trapnr, signr, str, name) \
+fastcall void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+						== NOTIFY_STOP) \
+		return; \
+	do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \
+}
+
+#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
+fastcall void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+	siginfo_t info; \
+	info.si_signo = signr; \
+	info.si_errno = 0; \
+	info.si_code = sicode; \
+	info.si_addr = (void __user *)siaddr; \
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+						== NOTIFY_STOP) \
+		return; \
+	do_trap(trapnr, signr, str, 0, regs, error_code, &info); \
+}
+
+#define DO_VM86_ERROR(trapnr, signr, str, name) \
+fastcall void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+						== NOTIFY_STOP) \
+		return; \
+	do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \
+}
+
+#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
+fastcall void do_##name(struct pt_regs * regs, long error_code) \
+{ \
+	siginfo_t info; \
+	info.si_signo = signr; \
+	info.si_errno = 0; \
+	info.si_code = sicode; \
+	info.si_addr = (void __user *)siaddr; \
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+						== NOTIFY_STOP) \
+		return; \
+	do_trap(trapnr, signr, str, 1, regs, error_code, &info); \
+}
+
+DO_VM86_ERROR_INFO( 0, SIGFPE,  "divide error", divide_error, FPE_INTDIV, regs->eip)
+#ifndef CONFIG_KPROBES
+DO_VM86_ERROR( 3, SIGTRAP, "int3", int3)
+#endif
+DO_VM86_ERROR( 4, SIGSEGV, "overflow", overflow)
+DO_VM86_ERROR( 5, SIGSEGV, "bounds", bounds)
+DO_ERROR_INFO( 6, SIGILL,  "invalid operand", invalid_op, ILL_ILLOPN, regs->eip)
+DO_ERROR( 9, SIGFPE,  "coprocessor segment overrun", coprocessor_segment_overrun)
+DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
+DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
+DO_ERROR(12, SIGBUS,  "stack segment", stack_segment)
+DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
+
+fastcall void do_general_protection(struct pt_regs * regs, long error_code)
+{
+	int cpu = get_cpu();
+	struct tss_struct *tss = &per_cpu(init_tss, cpu);
+	struct thread_struct *thread = &current->thread;
+
+	/*
+	 * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
+	 * invalid offset set (the LAZY one) and the faulting thread has
+	 * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS
+	 * and we set the offset field correctly. Then we let the CPU to
+	 * restart the faulting instruction.
+	 */
+	if (tss->io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY &&
+	    thread->io_bitmap_ptr) {
+		memcpy(tss->io_bitmap, thread->io_bitmap_ptr,
+		       thread->io_bitmap_max);
+		/*
+		 * If the previously set map was extending to higher ports
+		 * than the current one, pad extra space with 0xff (no access).
+		 */
+		if (thread->io_bitmap_max < tss->io_bitmap_max)
+			memset((char *) tss->io_bitmap +
+				thread->io_bitmap_max, 0xff,
+				tss->io_bitmap_max - thread->io_bitmap_max);
+		tss->io_bitmap_max = thread->io_bitmap_max;
+		tss->io_bitmap_base = IO_BITMAP_OFFSET;
+		put_cpu();
+		return;
+	}
+	put_cpu();
+
+	if (regs->eflags & VM_MASK)
+		goto gp_in_vm86;
+
+	if (!(regs->xcs & 3))
+		goto gp_in_kernel;
+
+	current->thread.error_code = error_code;
+	current->thread.trap_no = 13;
+	force_sig(SIGSEGV, current);
+	return;
+
+gp_in_vm86:
+	local_irq_enable();
+	handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
+	return;
+
+gp_in_kernel:
+	if (!fixup_exception(regs)) {
+		if (notify_die(DIE_GPF, "general protection fault", regs,
+				error_code, 13, SIGSEGV) == NOTIFY_STOP)
+			return;
+		die("general protection fault", regs, error_code);
+	}
+}
+
+static void mem_parity_error(unsigned char reason, struct pt_regs * regs)
+{
+	printk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n");
+	printk("You probably have a hardware problem with your RAM chips\n");
+
+	/* Clear and disable the memory parity error line. */
+	clear_mem_error(reason);
+}
+
+static void io_check_error(unsigned char reason, struct pt_regs * regs)
+{
+	unsigned long i;
+
+	printk("NMI: IOCK error (debug interrupt?)\n");
+	show_registers(regs);
+
+	/* Re-enable the IOCK line, wait for a few seconds */
+	reason = (reason & 0xf) | 8;
+	outb(reason, 0x61);
+	i = 2000;
+	while (--i) udelay(1000);
+	reason &= ~8;
+	outb(reason, 0x61);
+}
+
+static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
+{
+#ifdef CONFIG_MCA
+	/* Might actually be able to figure out what the guilty party
+	* is. */
+	if( MCA_bus ) {
+		mca_handle_nmi();
+		return;
+	}
+#endif
+	printk("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
+		reason, smp_processor_id());
+	printk("Dazed and confused, but trying to continue\n");
+	printk("Do you have a strange power saving mode enabled?\n");
+}
+
+static DEFINE_SPINLOCK(nmi_print_lock);
+
+void die_nmi (struct pt_regs *regs, const char *msg)
+{
+	spin_lock(&nmi_print_lock);
+	/*
+	* We are in trouble anyway, lets at least try
+	* to get a message out.
+	*/
+	bust_spinlocks(1);
+	printk(msg);
+	printk(" on CPU%d, eip %08lx, registers:\n",
+		smp_processor_id(), regs->eip);
+	show_registers(regs);
+	printk("console shuts up ...\n");
+	console_silent();
+	spin_unlock(&nmi_print_lock);
+	bust_spinlocks(0);
+	do_exit(SIGSEGV);
+}
+
+static void default_do_nmi(struct pt_regs * regs)
+{
+	unsigned char reason = 0;
+
+	/* Only the BSP gets external NMIs from the system.  */
+	if (!smp_processor_id())
+		reason = get_nmi_reason();
+ 
+	if (!(reason & 0xc0)) {
+		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 0, SIGINT)
+							== NOTIFY_STOP)
+			return;
+#ifdef CONFIG_X86_LOCAL_APIC
+		/*
+		 * Ok, so this is none of the documented NMI sources,
+		 * so it must be the NMI watchdog.
+		 */
+		if (nmi_watchdog) {
+			nmi_watchdog_tick(regs);
+			return;
+		}
+#endif
+		unknown_nmi_error(reason, regs);
+		return;
+	}
+	if (notify_die(DIE_NMI, "nmi", regs, reason, 0, SIGINT) == NOTIFY_STOP)
+		return;
+	if (reason & 0x80)
+		mem_parity_error(reason, regs);
+	if (reason & 0x40)
+		io_check_error(reason, regs);
+	/*
+	 * Reassert NMI in case it became active meanwhile
+	 * as it's edge-triggered.
+	 */
+	reassert_nmi();
+}
+
+static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
+{
+	return 0;
+}
+ 
+static nmi_callback_t nmi_callback = dummy_nmi_callback;
+ 
+fastcall void do_nmi(struct pt_regs * regs, long error_code)
+{
+	int cpu;
+
+	nmi_enter();
+
+	cpu = smp_processor_id();
+	++nmi_count(cpu);
+
+	if (!nmi_callback(regs, cpu))
+		default_do_nmi(regs);
+
+	nmi_exit();
+}
+
+void set_nmi_callback(nmi_callback_t callback)
+{
+	nmi_callback = callback;
+}
+
+void unset_nmi_callback(void)
+{
+	nmi_callback = dummy_nmi_callback;
+}
+
+#ifdef CONFIG_KPROBES
+fastcall int do_int3(struct pt_regs *regs, long error_code)
+{
+	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
+			== NOTIFY_STOP)
+		return 1;
+	/* This is an interrupt gate, because kprobes wants interrupts
+	disabled.  Normal trap handlers don't. */
+	restore_interrupts(regs);
+	do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL);
+	return 0;
+}
+#endif
+
+/*
+ * Our handling of the processor debug registers is non-trivial.
+ * We do not clear them on entry and exit from the kernel. Therefore
+ * it is possible to get a watchpoint trap here from inside the kernel.
+ * However, the code in ./ptrace.c has ensured that the user can
+ * only set watchpoints on userspace addresses. Therefore the in-kernel
+ * watchpoint trap can only occur in code which is reading/writing
+ * from user space. Such code must not hold kernel locks (since it
+ * can equally take a page fault), therefore it is safe to call
+ * force_sig_info even though that claims and releases locks.
+ * 
+ * Code in ./signal.c ensures that the debug control register
+ * is restored before we deliver any signal, and therefore that
+ * user code runs with the correct debug control register even though
+ * we clear it here.
+ *
+ * Being careful here means that we don't have to be as careful in a
+ * lot of more complicated places (task switching can be a bit lazy
+ * about restoring all the debug state, and ptrace doesn't have to
+ * find every occurrence of the TF bit that could be saved away even
+ * by user code)
+ */
+fastcall void do_debug(struct pt_regs * regs, long error_code)
+{
+	unsigned int condition;
+	struct task_struct *tsk = current;
+
+	__asm__ __volatile__("movl %%db6,%0" : "=r" (condition));
+
+	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
+					SIGTRAP) == NOTIFY_STOP)
+		return;
+	/* It's safe to allow irq's after DR6 has been saved */
+	if (regs->eflags & X86_EFLAGS_IF)
+		local_irq_enable();
+
+	/* Mask out spurious debug traps due to lazy DR7 setting */
+	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
+		if (!tsk->thread.debugreg[7])
+			goto clear_dr7;
+	}
+
+	if (regs->eflags & VM_MASK)
+		goto debug_vm86;
+
+	/* Save debug status register where ptrace can see it */
+	tsk->thread.debugreg[6] = condition;
+
+	/*
+	 * Single-stepping through TF: make sure we ignore any events in
+	 * kernel space (but re-enable TF when returning to user mode).
+	 */
+	if (condition & DR_STEP) {
+		/*
+		 * We already checked v86 mode above, so we can
+		 * check for kernel mode by just checking the CPL
+		 * of CS.
+		 */
+		if ((regs->xcs & 3) == 0)
+			goto clear_TF_reenable;
+	}
+
+	/* Ok, finally something we can handle */
+	send_sigtrap(tsk, regs, error_code);
+
+	/* Disable additional traps. They'll be re-enabled when
+	 * the signal is delivered.
+	 */
+clear_dr7:
+	__asm__("movl %0,%%db7"
+		: /* no output */
+		: "r" (0));
+	return;
+
+debug_vm86:
+	handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
+	return;
+
+clear_TF_reenable:
+	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
+	regs->eflags &= ~TF_MASK;
+	return;
+}
+
+/*
+ * Note that we play around with the 'TS' bit in an attempt to get
+ * the correct behaviour even in the presence of the asynchronous
+ * IRQ13 behaviour
+ */
+void math_error(void __user *eip)
+{
+	struct task_struct * task;
+	siginfo_t info;
+	unsigned short cwd, swd;
+
+	/*
+	 * Save the info for the exception handler and clear the error.
+	 */
+	task = current;
+	save_init_fpu(task);
+	task->thread.trap_no = 16;
+	task->thread.error_code = 0;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_code = __SI_FAULT;
+	info.si_addr = eip;
+	/*
+	 * (~cwd & swd) will mask out exceptions that are not set to unmasked
+	 * status.  0x3f is the exception bits in these regs, 0x200 is the
+	 * C1 reg you need in case of a stack fault, 0x040 is the stack
+	 * fault bit.  We should only be taking one exception at a time,
+	 * so if this combination doesn't produce any single exception,
+	 * then we have a bad program that isn't syncronizing its FPU usage
+	 * and it will suffer the consequences since we won't be able to
+	 * fully reproduce the context of the exception
+	 */
+	cwd = get_fpu_cwd(task);
+	swd = get_fpu_swd(task);
+	switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
+		case 0x000:
+		default:
+			break;
+		case 0x001: /* Invalid Op */
+		case 0x041: /* Stack Fault */
+		case 0x241: /* Stack Fault | Direction */
+			info.si_code = FPE_FLTINV;
+			/* Should we clear the SF or let user space do it ???? */
+			break;
+		case 0x002: /* Denormalize */
+		case 0x010: /* Underflow */
+			info.si_code = FPE_FLTUND;
+			break;
+		case 0x004: /* Zero Divide */
+			info.si_code = FPE_FLTDIV;
+			break;
+		case 0x008: /* Overflow */
+			info.si_code = FPE_FLTOVF;
+			break;
+		case 0x020: /* Precision */
+			info.si_code = FPE_FLTRES;
+			break;
+	}
+	force_sig_info(SIGFPE, &info, task);
+}
+
+fastcall void do_coprocessor_error(struct pt_regs * regs, long error_code)
+{
+	ignore_fpu_irq = 1;
+	math_error((void __user *)regs->eip);
+}
+
+static void simd_math_error(void __user *eip)
+{
+	struct task_struct * task;
+	siginfo_t info;
+	unsigned short mxcsr;
+
+	/*
+	 * Save the info for the exception handler and clear the error.
+	 */
+	task = current;
+	save_init_fpu(task);
+	task->thread.trap_no = 19;
+	task->thread.error_code = 0;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_code = __SI_FAULT;
+	info.si_addr = eip;
+	/*
+	 * The SIMD FPU exceptions are handled a little differently, as there
+	 * is only a single status/control register.  Thus, to determine which
+	 * unmasked exception was caught we must mask the exception mask bits
+	 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
+	 */
+	mxcsr = get_fpu_mxcsr(task);
+	switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
+		case 0x000:
+		default:
+			break;
+		case 0x001: /* Invalid Op */
+			info.si_code = FPE_FLTINV;
+			break;
+		case 0x002: /* Denormalize */
+		case 0x010: /* Underflow */
+			info.si_code = FPE_FLTUND;
+			break;
+		case 0x004: /* Zero Divide */
+			info.si_code = FPE_FLTDIV;
+			break;
+		case 0x008: /* Overflow */
+			info.si_code = FPE_FLTOVF;
+			break;
+		case 0x020: /* Precision */
+			info.si_code = FPE_FLTRES;
+			break;
+	}
+	force_sig_info(SIGFPE, &info, task);
+}
+
+fastcall void do_simd_coprocessor_error(struct pt_regs * regs,
+					  long error_code)
+{
+	if (cpu_has_xmm) {
+		/* Handle SIMD FPU exceptions on PIII+ processors. */
+		ignore_fpu_irq = 1;
+		simd_math_error((void __user *)regs->eip);
+	} else {
+		/*
+		 * Handle strange cache flush from user space exception
+		 * in all other cases.  This is undocumented behaviour.
+		 */
+		if (regs->eflags & VM_MASK) {
+			handle_vm86_fault((struct kernel_vm86_regs *)regs,
+					  error_code);
+			return;
+		}
+		die_if_kernel("cache flush denied", regs, error_code);
+		current->thread.trap_no = 19;
+		current->thread.error_code = error_code;
+		force_sig(SIGSEGV, current);
+	}
+}
+
+fastcall void do_spurious_interrupt_bug(struct pt_regs * regs,
+					  long error_code)
+{
+#if 0
+	/* No need to warn about this any longer. */
+	printk("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
+#endif
+}
+
+fastcall void setup_x86_bogus_stack(unsigned char * stk)
+{
+	unsigned long *switch16_ptr, *switch32_ptr;
+	struct pt_regs *regs;
+	unsigned long stack_top, stack_bot;
+	unsigned short iret_frame16_off;
+	int cpu = smp_processor_id();
+	/* reserve the space on 32bit stack for the magic switch16 pointer */
+	memmove(stk, stk + 8, sizeof(struct pt_regs));
+	switch16_ptr = (unsigned long *)(stk + sizeof(struct pt_regs));
+	regs = (struct pt_regs *)stk;
+	/* now the switch32 on 16bit stack */
+	stack_bot = (unsigned long)&per_cpu(cpu_16bit_stack, cpu);
+	stack_top = stack_bot +	CPU_16BIT_STACK_SIZE;
+	switch32_ptr = (unsigned long *)(stack_top - 8);
+	iret_frame16_off = CPU_16BIT_STACK_SIZE - 8 - 20;
+	/* copy iret frame on 16bit stack */
+	memcpy((void *)(stack_bot + iret_frame16_off), &regs->eip, 20);
+	/* fill in the switch pointers */
+	switch16_ptr[0] = (regs->esp & 0xffff0000) | iret_frame16_off;
+	switch16_ptr[1] = __ESPFIX_SS;
+	switch32_ptr[0] = (unsigned long)stk + sizeof(struct pt_regs) +
+		8 - CPU_16BIT_STACK_SIZE;
+	switch32_ptr[1] = __KERNEL_DS;
+}
+
+fastcall unsigned char * fixup_x86_bogus_stack(unsigned short sp)
+{
+	unsigned long *switch32_ptr;
+	unsigned char *stack16, *stack32;
+	unsigned long stack_top, stack_bot;
+	int len;
+	int cpu = smp_processor_id();
+	stack_bot = (unsigned long)&per_cpu(cpu_16bit_stack, cpu);
+	stack_top = stack_bot +	CPU_16BIT_STACK_SIZE;
+	switch32_ptr = (unsigned long *)(stack_top - 8);
+	/* copy the data from 16bit stack to 32bit stack */
+	len = CPU_16BIT_STACK_SIZE - 8 - sp;
+	stack16 = (unsigned char *)(stack_bot + sp);
+	stack32 = (unsigned char *)
+		(switch32_ptr[0] + CPU_16BIT_STACK_SIZE - 8 - len);
+	memcpy(stack32, stack16, len);
+	return stack32;
+}
+
+/*
+ *  'math_state_restore()' saves the current math information in the
+ * old math state array, and gets the new ones from the current task
+ *
+ * Careful.. There are problems with IBM-designed IRQ13 behaviour.
+ * Don't touch unless you *really* know how it works.
+ *
+ * Must be called with kernel preemption disabled (in this case,
+ * local interrupts are disabled at the call-site in entry.S).
+ */
+asmlinkage void math_state_restore(struct pt_regs regs)
+{
+	struct thread_info *thread = current_thread_info();
+	struct task_struct *tsk = thread->task;
+
+	clts();		/* Allow maths ops (or we recurse) */
+	if (!tsk_used_math(tsk))
+		init_fpu(tsk);
+	restore_fpu(tsk);
+	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
+}
+
+#ifndef CONFIG_MATH_EMULATION
+
+asmlinkage void math_emulate(long arg)
+{
+	printk("math-emulation not enabled and no coprocessor found.\n");
+	printk("killing %s.\n",current->comm);
+	force_sig(SIGFPE,current);
+	schedule();
+}
+
+#endif /* CONFIG_MATH_EMULATION */
+
+#ifdef CONFIG_X86_F00F_BUG
+void __init trap_init_f00f_bug(void)
+{
+	__set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
+
+	/*
+	 * Update the IDT descriptor and reload the IDT so that
+	 * it uses the read-only mapped virtual address.
+	 */
+	idt_descr.address = fix_to_virt(FIX_F00F_IDT);
+	__asm__ __volatile__("lidt %0" : : "m" (idt_descr));
+}
+#endif
+
+#define _set_gate(gate_addr,type,dpl,addr,seg) \
+do { \
+  int __d0, __d1; \
+  __asm__ __volatile__ ("movw %%dx,%%ax\n\t" \
+	"movw %4,%%dx\n\t" \
+	"movl %%eax,%0\n\t" \
+	"movl %%edx,%1" \
+	:"=m" (*((long *) (gate_addr))), \
+	 "=m" (*(1+(long *) (gate_addr))), "=&a" (__d0), "=&d" (__d1) \
+	:"i" ((short) (0x8000+(dpl<<13)+(type<<8))), \
+	 "3" ((char *) (addr)),"2" ((seg) << 16)); \
+} while (0)
+
+
+/*
+ * This needs to use 'idt_table' rather than 'idt', and
+ * thus use the _nonmapped_ version of the IDT, as the
+ * Pentium F0 0F bugfix can have resulted in the mapped
+ * IDT being write-protected.
+ */
+void set_intr_gate(unsigned int n, void *addr)
+{
+	_set_gate(idt_table+n,14,0,addr,__KERNEL_CS);
+}
+
+/*
+ * This routine sets up an interrupt gate at directory privilege level 3.
+ */
+static inline void set_system_intr_gate(unsigned int n, void *addr)
+{
+	_set_gate(idt_table+n, 14, 3, addr, __KERNEL_CS);
+}
+
+static void __init set_trap_gate(unsigned int n, void *addr)
+{
+	_set_gate(idt_table+n,15,0,addr,__KERNEL_CS);
+}
+
+static void __init set_system_gate(unsigned int n, void *addr)
+{
+	_set_gate(idt_table+n,15,3,addr,__KERNEL_CS);
+}
+
+static void __init set_task_gate(unsigned int n, unsigned int gdt_entry)
+{
+	_set_gate(idt_table+n,5,0,0,(gdt_entry<<3));
+}
+
+
+void __init trap_init(void)
+{
+#ifdef CONFIG_EISA
+	void __iomem *p = ioremap(0x0FFFD9, 4);
+	if (readl(p) == 'E'+('I'<<8)+('S'<<16)+('A'<<24)) {
+		EISA_bus = 1;
+	}
+	iounmap(p);
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	init_apic_mappings();
+#endif
+
+	set_trap_gate(0,&divide_error);
+	set_intr_gate(1,&debug);
+	set_intr_gate(2,&nmi);
+	set_system_intr_gate(3, &int3); /* int3-5 can be called from all */
+	set_system_gate(4,&overflow);
+	set_system_gate(5,&bounds);
+	set_trap_gate(6,&invalid_op);
+	set_trap_gate(7,&device_not_available);
+	set_task_gate(8,GDT_ENTRY_DOUBLEFAULT_TSS);
+	set_trap_gate(9,&coprocessor_segment_overrun);
+	set_trap_gate(10,&invalid_TSS);
+	set_trap_gate(11,&segment_not_present);
+	set_trap_gate(12,&stack_segment);
+	set_trap_gate(13,&general_protection);
+	set_intr_gate(14,&page_fault);
+	set_trap_gate(15,&spurious_interrupt_bug);
+	set_trap_gate(16,&coprocessor_error);
+	set_trap_gate(17,&alignment_check);
+#ifdef CONFIG_X86_MCE
+	set_trap_gate(18,&machine_check);
+#endif
+	set_trap_gate(19,&simd_coprocessor_error);
+
+	set_system_gate(SYSCALL_VECTOR,&system_call);
+
+	/*
+	 * Should be a barrier for any external CPU state.
+	 */
+	cpu_init();
+
+	trap_init_hook();
+}
+
+static int __init kstack_setup(char *s)
+{
+	kstack_depth_to_print = simple_strtoul(s, NULL, 0);
+	return 0;
+}
+__setup("kstack=", kstack_setup);
diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c
new file mode 100644
index 000000000000..2f3d52dacff7
--- /dev/null
+++ b/arch/i386/kernel/vm86.c
@@ -0,0 +1,804 @@
+/*
+ *  linux/kernel/vm86.c
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ *
+ *  29 dec 2001 - Fixed oopses caused by unchecked access to the vm86
+ *                stack - Manfred Spraul <manfreds@colorfullife.com>
+ *
+ *  22 mar 2002 - Manfred detected the stackfaults, but didn't handle
+ *                them correctly. Now the emulation will be in a
+ *                consistent state after stackfaults - Kasper Dupont
+ *                <kasperd@daimi.au.dk>
+ *
+ *  22 mar 2002 - Added missing clear_IF in set_vflags_* Kasper Dupont
+ *                <kasperd@daimi.au.dk>
+ *
+ *  ?? ??? 2002 - Fixed premature returns from handle_vm86_fault
+ *                caused by Kasper Dupont's changes - Stas Sergeev
+ *
+ *   4 apr 2002 - Fixed CHECK_IF_IN_TRAP broken by Stas' changes.
+ *                Kasper Dupont <kasperd@daimi.au.dk>
+ *
+ *   9 apr 2002 - Changed syntax of macros in handle_vm86_fault.
+ *                Kasper Dupont <kasperd@daimi.au.dk>
+ *
+ *   9 apr 2002 - Changed stack access macros to jump to a label
+ *                instead of returning to userspace. This simplifies
+ *                do_int, and is needed by handle_vm6_fault. Kasper
+ *                Dupont <kasperd@daimi.au.dk>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/highmem.h>
+#include <linux/ptrace.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/tlbflush.h>
+#include <asm/irq.h>
+
+/*
+ * Known problems:
+ *
+ * Interrupt handling is not guaranteed:
+ * - a real x86 will disable all interrupts for one instruction
+ *   after a "mov ss,xx" to make stack handling atomic even without
+ *   the 'lss' instruction. We can't guarantee this in v86 mode,
+ *   as the next instruction might result in a page fault or similar.
+ * - a real x86 will have interrupts disabled for one instruction
+ *   past the 'sti' that enables them. We don't bother with all the
+ *   details yet.
+ *
+ * Let's hope these problems do not actually matter for anything.
+ */
+
+
+#define KVM86	((struct kernel_vm86_struct *)regs)
+#define VMPI 	KVM86->vm86plus
+
+
+/*
+ * 8- and 16-bit register defines..
+ */
+#define AL(regs)	(((unsigned char *)&((regs)->eax))[0])
+#define AH(regs)	(((unsigned char *)&((regs)->eax))[1])
+#define IP(regs)	(*(unsigned short *)&((regs)->eip))
+#define SP(regs)	(*(unsigned short *)&((regs)->esp))
+
+/*
+ * virtual flags (16 and 32-bit versions)
+ */
+#define VFLAGS	(*(unsigned short *)&(current->thread.v86flags))
+#define VEFLAGS	(current->thread.v86flags)
+
+#define set_flags(X,new,mask) \
+((X) = ((X) & ~(mask)) | ((new) & (mask)))
+
+#define SAFE_MASK	(0xDD5)
+#define RETURN_MASK	(0xDFF)
+
+#define VM86_REGS_PART2 orig_eax
+#define VM86_REGS_SIZE1 \
+        ( (unsigned)( & (((struct kernel_vm86_regs *)0)->VM86_REGS_PART2) ) )
+#define VM86_REGS_SIZE2 (sizeof(struct kernel_vm86_regs) - VM86_REGS_SIZE1)
+
+struct pt_regs * FASTCALL(save_v86_state(struct kernel_vm86_regs * regs));
+struct pt_regs * fastcall save_v86_state(struct kernel_vm86_regs * regs)
+{
+	struct tss_struct *tss;
+	struct pt_regs *ret;
+	unsigned long tmp;
+
+	/*
+	 * This gets called from entry.S with interrupts disabled, but
+	 * from process context. Enable interrupts here, before trying
+	 * to access user space.
+	 */
+	local_irq_enable();
+
+	if (!current->thread.vm86_info) {
+		printk("no vm86_info: BAD\n");
+		do_exit(SIGSEGV);
+	}
+	set_flags(regs->eflags, VEFLAGS, VIF_MASK | current->thread.v86mask);
+	tmp = copy_to_user(&current->thread.vm86_info->regs,regs, VM86_REGS_SIZE1);
+	tmp += copy_to_user(&current->thread.vm86_info->regs.VM86_REGS_PART2,
+		&regs->VM86_REGS_PART2, VM86_REGS_SIZE2);
+	tmp += put_user(current->thread.screen_bitmap,&current->thread.vm86_info->screen_bitmap);
+	if (tmp) {
+		printk("vm86: could not access userspace vm86_info\n");
+		do_exit(SIGSEGV);
+	}
+
+	tss = &per_cpu(init_tss, get_cpu());
+	current->thread.esp0 = current->thread.saved_esp0;
+	current->thread.sysenter_cs = __KERNEL_CS;
+	load_esp0(tss, &current->thread);
+	current->thread.saved_esp0 = 0;
+	put_cpu();
+
+	loadsegment(fs, current->thread.saved_fs);
+	loadsegment(gs, current->thread.saved_gs);
+	ret = KVM86->regs32;
+	return ret;
+}
+
+static void mark_screen_rdonly(struct task_struct * tsk)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte, *mapped;
+	int i;
+
+	preempt_disable();
+	spin_lock(&tsk->mm->page_table_lock);
+	pgd = pgd_offset(tsk->mm, 0xA0000);
+	if (pgd_none_or_clear_bad(pgd))
+		goto out;
+	pud = pud_offset(pgd, 0xA0000);
+	if (pud_none_or_clear_bad(pud))
+		goto out;
+	pmd = pmd_offset(pud, 0xA0000);
+	if (pmd_none_or_clear_bad(pmd))
+		goto out;
+	pte = mapped = pte_offset_map(pmd, 0xA0000);
+	for (i = 0; i < 32; i++) {
+		if (pte_present(*pte))
+			set_pte(pte, pte_wrprotect(*pte));
+		pte++;
+	}
+	pte_unmap(mapped);
+out:
+	spin_unlock(&tsk->mm->page_table_lock);
+	preempt_enable();
+	flush_tlb();
+}
+
+
+
+static int do_vm86_irq_handling(int subfunction, int irqnumber);
+static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk);
+
+asmlinkage int sys_vm86old(struct pt_regs regs)
+{
+	struct vm86_struct __user *v86 = (struct vm86_struct __user *)regs.ebx;
+	struct kernel_vm86_struct info; /* declare this _on top_,
+					 * this avoids wasting of stack space.
+					 * This remains on the stack until we
+					 * return to 32 bit user space.
+					 */
+	struct task_struct *tsk;
+	int tmp, ret = -EPERM;
+
+	tsk = current;
+	if (tsk->thread.saved_esp0)
+		goto out;
+	tmp  = copy_from_user(&info, v86, VM86_REGS_SIZE1);
+	tmp += copy_from_user(&info.regs.VM86_REGS_PART2, &v86->regs.VM86_REGS_PART2,
+		(long)&info.vm86plus - (long)&info.regs.VM86_REGS_PART2);
+	ret = -EFAULT;
+	if (tmp)
+		goto out;
+	memset(&info.vm86plus, 0, (int)&info.regs32 - (int)&info.vm86plus);
+	info.regs32 = &regs;
+	tsk->thread.vm86_info = v86;
+	do_sys_vm86(&info, tsk);
+	ret = 0;	/* we never return here */
+out:
+	return ret;
+}
+
+
+asmlinkage int sys_vm86(struct pt_regs regs)
+{
+	struct kernel_vm86_struct info; /* declare this _on top_,
+					 * this avoids wasting of stack space.
+					 * This remains on the stack until we
+					 * return to 32 bit user space.
+					 */
+	struct task_struct *tsk;
+	int tmp, ret;
+	struct vm86plus_struct __user *v86;
+
+	tsk = current;
+	switch (regs.ebx) {
+		case VM86_REQUEST_IRQ:
+		case VM86_FREE_IRQ:
+		case VM86_GET_IRQ_BITS:
+		case VM86_GET_AND_RESET_IRQ:
+			ret = do_vm86_irq_handling(regs.ebx, (int)regs.ecx);
+			goto out;
+		case VM86_PLUS_INSTALL_CHECK:
+			/* NOTE: on old vm86 stuff this will return the error
+			   from verify_area(), because the subfunction is
+			   interpreted as (invalid) address to vm86_struct.
+			   So the installation check works.
+			 */
+			ret = 0;
+			goto out;
+	}
+
+	/* we come here only for functions VM86_ENTER, VM86_ENTER_NO_BYPASS */
+	ret = -EPERM;
+	if (tsk->thread.saved_esp0)
+		goto out;
+	v86 = (struct vm86plus_struct __user *)regs.ecx;
+	tmp  = copy_from_user(&info, v86, VM86_REGS_SIZE1);
+	tmp += copy_from_user(&info.regs.VM86_REGS_PART2, &v86->regs.VM86_REGS_PART2,
+		(long)&info.regs32 - (long)&info.regs.VM86_REGS_PART2);
+	ret = -EFAULT;
+	if (tmp)
+		goto out;
+	info.regs32 = &regs;
+	info.vm86plus.is_vm86pus = 1;
+	tsk->thread.vm86_info = (struct vm86_struct __user *)v86;
+	do_sys_vm86(&info, tsk);
+	ret = 0;	/* we never return here */
+out:
+	return ret;
+}
+
+
+static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk)
+{
+	struct tss_struct *tss;
+/*
+ * make sure the vm86() system call doesn't try to do anything silly
+ */
+	info->regs.__null_ds = 0;
+	info->regs.__null_es = 0;
+
+/* we are clearing fs,gs later just before "jmp resume_userspace",
+ * because starting with Linux 2.1.x they aren't no longer saved/restored
+ */
+
+/*
+ * The eflags register is also special: we cannot trust that the user
+ * has set it up safely, so this makes sure interrupt etc flags are
+ * inherited from protected mode.
+ */
+ 	VEFLAGS = info->regs.eflags;
+	info->regs.eflags &= SAFE_MASK;
+	info->regs.eflags |= info->regs32->eflags & ~SAFE_MASK;
+	info->regs.eflags |= VM_MASK;
+
+	switch (info->cpu_type) {
+		case CPU_286:
+			tsk->thread.v86mask = 0;
+			break;
+		case CPU_386:
+			tsk->thread.v86mask = NT_MASK | IOPL_MASK;
+			break;
+		case CPU_486:
+			tsk->thread.v86mask = AC_MASK | NT_MASK | IOPL_MASK;
+			break;
+		default:
+			tsk->thread.v86mask = ID_MASK | AC_MASK | NT_MASK | IOPL_MASK;
+			break;
+	}
+
+/*
+ * Save old state, set default return value (%eax) to 0
+ */
+	info->regs32->eax = 0;
+	tsk->thread.saved_esp0 = tsk->thread.esp0;
+	asm volatile("movl %%fs,%0":"=m" (tsk->thread.saved_fs));
+	asm volatile("movl %%gs,%0":"=m" (tsk->thread.saved_gs));
+
+	tss = &per_cpu(init_tss, get_cpu());
+	tsk->thread.esp0 = (unsigned long) &info->VM86_TSS_ESP0;
+	if (cpu_has_sep)
+		tsk->thread.sysenter_cs = 0;
+	load_esp0(tss, &tsk->thread);
+	put_cpu();
+
+	tsk->thread.screen_bitmap = info->screen_bitmap;
+	if (info->flags & VM86_SCREEN_BITMAP)
+		mark_screen_rdonly(tsk);
+	__asm__ __volatile__(
+		"xorl %%eax,%%eax; movl %%eax,%%fs; movl %%eax,%%gs\n\t"
+		"movl %0,%%esp\n\t"
+		"movl %1,%%ebp\n\t"
+		"jmp resume_userspace"
+		: /* no outputs */
+		:"r" (&info->regs), "r" (tsk->thread_info) : "ax");
+	/* we never return here */
+}
+
+static inline void return_to_32bit(struct kernel_vm86_regs * regs16, int retval)
+{
+	struct pt_regs * regs32;
+
+	regs32 = save_v86_state(regs16);
+	regs32->eax = retval;
+	__asm__ __volatile__("movl %0,%%esp\n\t"
+		"movl %1,%%ebp\n\t"
+		"jmp resume_userspace"
+		: : "r" (regs32), "r" (current_thread_info()));
+}
+
+static inline void set_IF(struct kernel_vm86_regs * regs)
+{
+	VEFLAGS |= VIF_MASK;
+	if (VEFLAGS & VIP_MASK)
+		return_to_32bit(regs, VM86_STI);
+}
+
+static inline void clear_IF(struct kernel_vm86_regs * regs)
+{
+	VEFLAGS &= ~VIF_MASK;
+}
+
+static inline void clear_TF(struct kernel_vm86_regs * regs)
+{
+	regs->eflags &= ~TF_MASK;
+}
+
+static inline void clear_AC(struct kernel_vm86_regs * regs)
+{
+	regs->eflags &= ~AC_MASK;
+}
+
+/* It is correct to call set_IF(regs) from the set_vflags_*
+ * functions. However someone forgot to call clear_IF(regs)
+ * in the opposite case.
+ * After the command sequence CLI PUSHF STI POPF you should
+ * end up with interrups disabled, but you ended up with
+ * interrupts enabled.
+ *  ( I was testing my own changes, but the only bug I
+ *    could find was in a function I had not changed. )
+ * [KD]
+ */
+
+static inline void set_vflags_long(unsigned long eflags, struct kernel_vm86_regs * regs)
+{
+	set_flags(VEFLAGS, eflags, current->thread.v86mask);
+	set_flags(regs->eflags, eflags, SAFE_MASK);
+	if (eflags & IF_MASK)
+		set_IF(regs);
+	else
+		clear_IF(regs);
+}
+
+static inline void set_vflags_short(unsigned short flags, struct kernel_vm86_regs * regs)
+{
+	set_flags(VFLAGS, flags, current->thread.v86mask);
+	set_flags(regs->eflags, flags, SAFE_MASK);
+	if (flags & IF_MASK)
+		set_IF(regs);
+	else
+		clear_IF(regs);
+}
+
+static inline unsigned long get_vflags(struct kernel_vm86_regs * regs)
+{
+	unsigned long flags = regs->eflags & RETURN_MASK;
+
+	if (VEFLAGS & VIF_MASK)
+		flags |= IF_MASK;
+	flags |= IOPL_MASK;
+	return flags | (VEFLAGS & current->thread.v86mask);
+}
+
+static inline int is_revectored(int nr, struct revectored_struct * bitmap)
+{
+	__asm__ __volatile__("btl %2,%1\n\tsbbl %0,%0"
+		:"=r" (nr)
+		:"m" (*bitmap),"r" (nr));
+	return nr;
+}
+
+#define val_byte(val, n) (((__u8 *)&val)[n])
+
+#define pushb(base, ptr, val, err_label) \
+	do { \
+		__u8 __val = val; \
+		ptr--; \
+		if (put_user(__val, base + ptr) < 0) \
+			goto err_label; \
+	} while(0)
+
+#define pushw(base, ptr, val, err_label) \
+	do { \
+		__u16 __val = val; \
+		ptr--; \
+		if (put_user(val_byte(__val, 1), base + ptr) < 0) \
+			goto err_label; \
+		ptr--; \
+		if (put_user(val_byte(__val, 0), base + ptr) < 0) \
+			goto err_label; \
+	} while(0)
+
+#define pushl(base, ptr, val, err_label) \
+	do { \
+		__u32 __val = val; \
+		ptr--; \
+		if (put_user(val_byte(__val, 3), base + ptr) < 0) \
+			goto err_label; \
+		ptr--; \
+		if (put_user(val_byte(__val, 2), base + ptr) < 0) \
+			goto err_label; \
+		ptr--; \
+		if (put_user(val_byte(__val, 1), base + ptr) < 0) \
+			goto err_label; \
+		ptr--; \
+		if (put_user(val_byte(__val, 0), base + ptr) < 0) \
+			goto err_label; \
+	} while(0)
+
+#define popb(base, ptr, err_label) \
+	({ \
+		__u8 __res; \
+		if (get_user(__res, base + ptr) < 0) \
+			goto err_label; \
+		ptr++; \
+		__res; \
+	})
+
+#define popw(base, ptr, err_label) \
+	({ \
+		__u16 __res; \
+		if (get_user(val_byte(__res, 0), base + ptr) < 0) \
+			goto err_label; \
+		ptr++; \
+		if (get_user(val_byte(__res, 1), base + ptr) < 0) \
+			goto err_label; \
+		ptr++; \
+		__res; \
+	})
+
+#define popl(base, ptr, err_label) \
+	({ \
+		__u32 __res; \
+		if (get_user(val_byte(__res, 0), base + ptr) < 0) \
+			goto err_label; \
+		ptr++; \
+		if (get_user(val_byte(__res, 1), base + ptr) < 0) \
+			goto err_label; \
+		ptr++; \
+		if (get_user(val_byte(__res, 2), base + ptr) < 0) \
+			goto err_label; \
+		ptr++; \
+		if (get_user(val_byte(__res, 3), base + ptr) < 0) \
+			goto err_label; \
+		ptr++; \
+		__res; \
+	})
+
+/* There are so many possible reasons for this function to return
+ * VM86_INTx, so adding another doesn't bother me. We can expect
+ * userspace programs to be able to handle it. (Getting a problem
+ * in userspace is always better than an Oops anyway.) [KD]
+ */
+static void do_int(struct kernel_vm86_regs *regs, int i,
+    unsigned char __user * ssp, unsigned short sp)
+{
+	unsigned long __user *intr_ptr;
+	unsigned long segoffs;
+
+	if (regs->cs == BIOSSEG)
+		goto cannot_handle;
+	if (is_revectored(i, &KVM86->int_revectored))
+		goto cannot_handle;
+	if (i==0x21 && is_revectored(AH(regs),&KVM86->int21_revectored))
+		goto cannot_handle;
+	intr_ptr = (unsigned long __user *) (i << 2);
+	if (get_user(segoffs, intr_ptr))
+		goto cannot_handle;
+	if ((segoffs >> 16) == BIOSSEG)
+		goto cannot_handle;
+	pushw(ssp, sp, get_vflags(regs), cannot_handle);
+	pushw(ssp, sp, regs->cs, cannot_handle);
+	pushw(ssp, sp, IP(regs), cannot_handle);
+	regs->cs = segoffs >> 16;
+	SP(regs) -= 6;
+	IP(regs) = segoffs & 0xffff;
+	clear_TF(regs);
+	clear_IF(regs);
+	clear_AC(regs);
+	return;
+
+cannot_handle:
+	return_to_32bit(regs, VM86_INTx + (i << 8));
+}
+
+int handle_vm86_trap(struct kernel_vm86_regs * regs, long error_code, int trapno)
+{
+	if (VMPI.is_vm86pus) {
+		if ( (trapno==3) || (trapno==1) )
+			return_to_32bit(regs, VM86_TRAP + (trapno << 8));
+		do_int(regs, trapno, (unsigned char __user *) (regs->ss << 4), SP(regs));
+		return 0;
+	}
+	if (trapno !=1)
+		return 1; /* we let this handle by the calling routine */
+	if (current->ptrace & PT_PTRACED) {
+		unsigned long flags;
+		spin_lock_irqsave(&current->sighand->siglock, flags);
+		sigdelset(&current->blocked, SIGTRAP);
+		recalc_sigpending();
+		spin_unlock_irqrestore(&current->sighand->siglock, flags);
+	}
+	send_sig(SIGTRAP, current, 1);
+	current->thread.trap_no = trapno;
+	current->thread.error_code = error_code;
+	return 0;
+}
+
+void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code)
+{
+	unsigned char opcode;
+	unsigned char __user *csp;
+	unsigned char __user *ssp;
+	unsigned short ip, sp;
+	int data32, pref_done;
+
+#define CHECK_IF_IN_TRAP \
+	if (VMPI.vm86dbg_active && VMPI.vm86dbg_TFpendig) \
+		newflags |= TF_MASK
+#define VM86_FAULT_RETURN do { \
+	if (VMPI.force_return_for_pic  && (VEFLAGS & (IF_MASK | VIF_MASK))) \
+		return_to_32bit(regs, VM86_PICRETURN); \
+	return; } while (0)
+
+	csp = (unsigned char __user *) (regs->cs << 4);
+	ssp = (unsigned char __user *) (regs->ss << 4);
+	sp = SP(regs);
+	ip = IP(regs);
+
+	data32 = 0;
+	pref_done = 0;
+	do {
+		switch (opcode = popb(csp, ip, simulate_sigsegv)) {
+			case 0x66:      /* 32-bit data */     data32=1; break;
+			case 0x67:      /* 32-bit address */  break;
+			case 0x2e:      /* CS */              break;
+			case 0x3e:      /* DS */              break;
+			case 0x26:      /* ES */              break;
+			case 0x36:      /* SS */              break;
+			case 0x65:      /* GS */              break;
+			case 0x64:      /* FS */              break;
+			case 0xf2:      /* repnz */       break;
+			case 0xf3:      /* rep */             break;
+			default: pref_done = 1;
+		}
+	} while (!pref_done);
+
+	switch (opcode) {
+
+	/* pushf */
+	case 0x9c:
+		if (data32) {
+			pushl(ssp, sp, get_vflags(regs), simulate_sigsegv);
+			SP(regs) -= 4;
+		} else {
+			pushw(ssp, sp, get_vflags(regs), simulate_sigsegv);
+			SP(regs) -= 2;
+		}
+		IP(regs) = ip;
+		VM86_FAULT_RETURN;
+
+	/* popf */
+	case 0x9d:
+		{
+		unsigned long newflags;
+		if (data32) {
+			newflags=popl(ssp, sp, simulate_sigsegv);
+			SP(regs) += 4;
+		} else {
+			newflags = popw(ssp, sp, simulate_sigsegv);
+			SP(regs) += 2;
+		}
+		IP(regs) = ip;
+		CHECK_IF_IN_TRAP;
+		if (data32) {
+			set_vflags_long(newflags, regs);
+		} else {
+			set_vflags_short(newflags, regs);
+		}
+		VM86_FAULT_RETURN;
+		}
+
+	/* int xx */
+	case 0xcd: {
+		int intno=popb(csp, ip, simulate_sigsegv);
+		IP(regs) = ip;
+		if (VMPI.vm86dbg_active) {
+			if ( (1 << (intno &7)) & VMPI.vm86dbg_intxxtab[intno >> 3] )
+				return_to_32bit(regs, VM86_INTx + (intno << 8));
+		}
+		do_int(regs, intno, ssp, sp);
+		return;
+	}
+
+	/* iret */
+	case 0xcf:
+		{
+		unsigned long newip;
+		unsigned long newcs;
+		unsigned long newflags;
+		if (data32) {
+			newip=popl(ssp, sp, simulate_sigsegv);
+			newcs=popl(ssp, sp, simulate_sigsegv);
+			newflags=popl(ssp, sp, simulate_sigsegv);
+			SP(regs) += 12;
+		} else {
+			newip = popw(ssp, sp, simulate_sigsegv);
+			newcs = popw(ssp, sp, simulate_sigsegv);
+			newflags = popw(ssp, sp, simulate_sigsegv);
+			SP(regs) += 6;
+		}
+		IP(regs) = newip;
+		regs->cs = newcs;
+		CHECK_IF_IN_TRAP;
+		if (data32) {
+			set_vflags_long(newflags, regs);
+		} else {
+			set_vflags_short(newflags, regs);
+		}
+		VM86_FAULT_RETURN;
+		}
+
+	/* cli */
+	case 0xfa:
+		IP(regs) = ip;
+		clear_IF(regs);
+		VM86_FAULT_RETURN;
+
+	/* sti */
+	/*
+	 * Damn. This is incorrect: the 'sti' instruction should actually
+	 * enable interrupts after the /next/ instruction. Not good.
+	 *
+	 * Probably needs some horsing around with the TF flag. Aiee..
+	 */
+	case 0xfb:
+		IP(regs) = ip;
+		set_IF(regs);
+		VM86_FAULT_RETURN;
+
+	default:
+		return_to_32bit(regs, VM86_UNKNOWN);
+	}
+
+	return;
+
+simulate_sigsegv:
+	/* FIXME: After a long discussion with Stas we finally
+	 *        agreed, that this is wrong. Here we should
+	 *        really send a SIGSEGV to the user program.
+	 *        But how do we create the correct context? We
+	 *        are inside a general protection fault handler
+	 *        and has just returned from a page fault handler.
+	 *        The correct context for the signal handler
+	 *        should be a mixture of the two, but how do we
+	 *        get the information? [KD]
+	 */
+	return_to_32bit(regs, VM86_UNKNOWN);
+}
+
+/* ---------------- vm86 special IRQ passing stuff ----------------- */
+
+#define VM86_IRQNAME		"vm86irq"
+
+static struct vm86_irqs {
+	struct task_struct *tsk;
+	int sig;
+} vm86_irqs[16];
+
+static DEFINE_SPINLOCK(irqbits_lock);
+static int irqbits;
+
+#define ALLOWED_SIGS ( 1 /* 0 = don't send a signal */ \
+	| (1 << SIGUSR1) | (1 << SIGUSR2) | (1 << SIGIO)  | (1 << SIGURG) \
+	| (1 << SIGUNUSED) )
+	
+static irqreturn_t irq_handler(int intno, void *dev_id, struct pt_regs * regs)
+{
+	int irq_bit;
+	unsigned long flags;
+
+	spin_lock_irqsave(&irqbits_lock, flags);	
+	irq_bit = 1 << intno;
+	if ((irqbits & irq_bit) || ! vm86_irqs[intno].tsk)
+		goto out;
+	irqbits |= irq_bit;
+	if (vm86_irqs[intno].sig)
+		send_sig(vm86_irqs[intno].sig, vm86_irqs[intno].tsk, 1);
+	spin_unlock_irqrestore(&irqbits_lock, flags);
+	/*
+	 * IRQ will be re-enabled when user asks for the irq (whether
+	 * polling or as a result of the signal)
+	 */
+	disable_irq(intno);
+	return IRQ_HANDLED;
+
+out:
+	spin_unlock_irqrestore(&irqbits_lock, flags);	
+	return IRQ_NONE;
+}
+
+static inline void free_vm86_irq(int irqnumber)
+{
+	unsigned long flags;
+
+	free_irq(irqnumber, NULL);
+	vm86_irqs[irqnumber].tsk = NULL;
+
+	spin_lock_irqsave(&irqbits_lock, flags);	
+	irqbits &= ~(1 << irqnumber);
+	spin_unlock_irqrestore(&irqbits_lock, flags);	
+}
+
+void release_vm86_irqs(struct task_struct *task)
+{
+	int i;
+	for (i = FIRST_VM86_IRQ ; i <= LAST_VM86_IRQ; i++)
+	    if (vm86_irqs[i].tsk == task)
+		free_vm86_irq(i);
+}
+
+static inline int get_and_reset_irq(int irqnumber)
+{
+	int bit;
+	unsigned long flags;
+	
+	if (invalid_vm86_irq(irqnumber)) return 0;
+	if (vm86_irqs[irqnumber].tsk != current) return 0;
+	spin_lock_irqsave(&irqbits_lock, flags);	
+	bit = irqbits & (1 << irqnumber);
+	irqbits &= ~bit;
+	spin_unlock_irqrestore(&irqbits_lock, flags);	
+	if (!bit)
+		return 0;
+	enable_irq(irqnumber);
+	return 1;
+}
+
+
+static int do_vm86_irq_handling(int subfunction, int irqnumber)
+{
+	int ret;
+	switch (subfunction) {
+		case VM86_GET_AND_RESET_IRQ: {
+			return get_and_reset_irq(irqnumber);
+		}
+		case VM86_GET_IRQ_BITS: {
+			return irqbits;
+		}
+		case VM86_REQUEST_IRQ: {
+			int sig = irqnumber >> 8;
+			int irq = irqnumber & 255;
+			if (!capable(CAP_SYS_ADMIN)) return -EPERM;
+			if (!((1 << sig) & ALLOWED_SIGS)) return -EPERM;
+			if (invalid_vm86_irq(irq)) return -EPERM;
+			if (vm86_irqs[irq].tsk) return -EPERM;
+			ret = request_irq(irq, &irq_handler, 0, VM86_IRQNAME, NULL);
+			if (ret) return ret;
+			vm86_irqs[irq].sig = sig;
+			vm86_irqs[irq].tsk = current;
+			return irq;
+		}
+		case  VM86_FREE_IRQ: {
+			if (invalid_vm86_irq(irqnumber)) return -EPERM;
+			if (!vm86_irqs[irqnumber].tsk) return 0;
+			if (vm86_irqs[irqnumber].tsk != current) return -EPERM;
+			free_vm86_irq(irqnumber);
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..e0512cc8bea7
--- /dev/null
+++ b/arch/i386/kernel/vmlinux.lds.S
@@ -0,0 +1,134 @@
+/* ld script to make i386 Linux kernel
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+jiffies = jiffies_64;
+SECTIONS
+{
+  . = __PAGE_OFFSET + 0x100000;
+  /* read-only */
+  _text = .;			/* Text and read-only data */
+  .text : {
+	*(.text)
+	SCHED_TEXT
+	LOCK_TEXT
+	*(.fixup)
+	*(.gnu.warning)
+	} = 0x9090
+
+  _etext = .;			/* End of text section */
+
+  . = ALIGN(16);		/* Exception table */
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  RODATA
+
+  /* writeable */
+  .data : {			/* Data */
+	*(.data)
+	CONSTRUCTORS
+	}
+
+  . = ALIGN(4096);
+  __nosave_begin = .;
+  .data_nosave : { *(.data.nosave) }
+  . = ALIGN(4096);
+  __nosave_end = .;
+
+  . = ALIGN(4096);
+  .data.page_aligned : { *(.data.idt) }
+
+  . = ALIGN(32);
+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+  _edata = .;			/* End of data section */
+
+  . = ALIGN(THREAD_SIZE);	/* init_task */
+  .data.init_task : { *(.data.init_task) }
+
+  /* will be freed after init */
+  . = ALIGN(4096);		/* Init code and data */
+  __init_begin = .;
+  .init.text : { 
+	_sinittext = .;
+	*(.init.text)
+	_einittext = .;
+  }
+  .init.data : { *(.init.data) }
+  . = ALIGN(16);
+  __setup_start = .;
+  .init.setup : { *(.init.setup) }
+  __setup_end = .;
+  __initcall_start = .;
+  .initcall.init : {
+	*(.initcall1.init) 
+	*(.initcall2.init) 
+	*(.initcall3.init) 
+	*(.initcall4.init) 
+	*(.initcall5.init) 
+	*(.initcall6.init) 
+	*(.initcall7.init)
+  }
+  __initcall_end = .;
+  __con_initcall_start = .;
+  .con_initcall.init : { *(.con_initcall.init) }
+  __con_initcall_end = .;
+  SECURITY_INIT
+  . = ALIGN(4);
+  __alt_instructions = .;
+  .altinstructions : { *(.altinstructions) } 
+  __alt_instructions_end = .; 
+ .altinstr_replacement : { *(.altinstr_replacement) } 
+  /* .exit.text is discard at runtime, not link time, to deal with references
+     from .altinstructions and .eh_frame */
+  .exit.text : { *(.exit.text) }
+  .exit.data : { *(.exit.data) }
+  . = ALIGN(4096);
+  __initramfs_start = .;
+  .init.ramfs : { *(.init.ramfs) }
+  __initramfs_end = .;
+  . = ALIGN(32);
+  __per_cpu_start = .;
+  .data.percpu  : { *(.data.percpu) }
+  __per_cpu_end = .;
+  . = ALIGN(4096);
+  __init_end = .;
+  /* freed after init ends here */
+	
+  __bss_start = .;		/* BSS */
+  .bss : {
+	*(.bss.page_aligned)
+	*(.bss)
+  }
+  . = ALIGN(4);
+  __bss_stop = .; 
+
+  _end = . ;
+
+  /* This is where the kernel creates the early boot page tables */
+  . = ALIGN(4096);
+  pg0 = .;
+
+  /* Sections to be discarded */
+  /DISCARD/ : {
+	*(.exitcall.exit)
+	}
+
+  /* Stabs debugging sections.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0 : { *(.comment) }
+}
diff --git a/arch/i386/kernel/vsyscall-int80.S b/arch/i386/kernel/vsyscall-int80.S
new file mode 100644
index 000000000000..530d0525e5e2
--- /dev/null
+++ b/arch/i386/kernel/vsyscall-int80.S
@@ -0,0 +1,53 @@
+/*
+ * Code for the vsyscall page.  This version uses the old int $0x80 method.
+ *
+ * NOTE:
+ * 1) __kernel_vsyscall _must_ be first in this page.
+ * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S
+ *    for details.
+ */
+
+	.text
+	.globl __kernel_vsyscall
+	.type __kernel_vsyscall,@function
+__kernel_vsyscall:
+.LSTART_vsyscall:
+	int $0x80
+	ret
+.LEND_vsyscall:
+	.size __kernel_vsyscall,.-.LSTART_vsyscall
+	.previous
+
+	.section .eh_frame,"a",@progbits
+.LSTARTFRAMEDLSI:
+	.long .LENDCIEDLSI-.LSTARTCIEDLSI
+.LSTARTCIEDLSI:
+	.long 0			/* CIE ID */
+	.byte 1			/* Version number */
+	.string "zR"		/* NUL-terminated augmentation string */
+	.uleb128 1		/* Code alignment factor */
+	.sleb128 -4		/* Data alignment factor */
+	.byte 8			/* Return address register column */
+	.uleb128 1		/* Augmentation value length */
+	.byte 0x1b		/* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+	.byte 0x0c		/* DW_CFA_def_cfa */
+	.uleb128 4
+	.uleb128 4
+	.byte 0x88		/* DW_CFA_offset, column 0x8 */
+	.uleb128 1
+	.align 4
+.LENDCIEDLSI:
+	.long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */
+.LSTARTFDEDLSI:
+	.long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */
+	.long .LSTART_vsyscall-.	/* PC-relative start address */
+	.long .LEND_vsyscall-.LSTART_vsyscall
+	.uleb128 0
+	.align 4
+.LENDFDEDLSI:
+	.previous
+
+/*
+ * Get the common code for the sigreturn entry points.
+ */
+#include "vsyscall-sigreturn.S"
diff --git a/arch/i386/kernel/vsyscall-sigreturn.S b/arch/i386/kernel/vsyscall-sigreturn.S
new file mode 100644
index 000000000000..c8fcf75b9be3
--- /dev/null
+++ b/arch/i386/kernel/vsyscall-sigreturn.S
@@ -0,0 +1,142 @@
+/*
+ * Common code for the sigreturn entry points on the vsyscall page.
+ * So far this code is the same for both int80 and sysenter versions.
+ * This file is #include'd by vsyscall-*.S to define them after the
+ * vsyscall entry point.  The kernel assumes that the addresses of these
+ * routines are constant for all vsyscall implementations.
+ */
+
+#include <asm/unistd.h>
+#include <asm/asm_offsets.h>
+
+
+/* XXX
+   Should these be named "_sigtramp" or something?
+*/
+
+	.text
+	.org	__kernel_vsyscall+32
+	.globl __kernel_sigreturn
+	.type __kernel_sigreturn,@function
+__kernel_sigreturn:
+.LSTART_sigreturn:
+	popl %eax		/* XXX does this mean it needs unwind info? */
+	movl $__NR_sigreturn, %eax
+	int $0x80
+.LEND_sigreturn:
+	.size __kernel_sigreturn,.-.LSTART_sigreturn
+
+	.balign 32
+	.globl __kernel_rt_sigreturn
+	.type __kernel_rt_sigreturn,@function
+__kernel_rt_sigreturn:
+.LSTART_rt_sigreturn:
+	movl $__NR_rt_sigreturn, %eax
+	int $0x80
+.LEND_rt_sigreturn:
+	.size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
+	.previous
+
+	.section .eh_frame,"a",@progbits
+.LSTARTFRAMEDLSI1:
+	.long .LENDCIEDLSI1-.LSTARTCIEDLSI1
+.LSTARTCIEDLSI1:
+	.long 0			/* CIE ID */
+	.byte 1			/* Version number */
+	.string "zR"		/* NUL-terminated augmentation string */
+	.uleb128 1		/* Code alignment factor */
+	.sleb128 -4		/* Data alignment factor */
+	.byte 8			/* Return address register column */
+	.uleb128 1		/* Augmentation value length */
+	.byte 0x1b		/* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+	.byte 0			/* DW_CFA_nop */
+	.align 4
+.LENDCIEDLSI1:
+	.long .LENDFDEDLSI1-.LSTARTFDEDLSI1 /* Length FDE */
+.LSTARTFDEDLSI1:
+	.long .LSTARTFDEDLSI1-.LSTARTFRAMEDLSI1 /* CIE pointer */
+	/* HACK: The dwarf2 unwind routines will subtract 1 from the
+	   return address to get an address in the middle of the
+	   presumed call instruction.  Since we didn't get here via
+	   a call, we need to include the nop before the real start
+	   to make up for it.  */
+	.long .LSTART_sigreturn-1-.	/* PC-relative start address */
+	.long .LEND_sigreturn-.LSTART_sigreturn+1
+	.uleb128 0			/* Augmentation */
+	/* What follows are the instructions for the table generation.
+	   We record the locations of each register saved.  This is
+	   complicated by the fact that the "CFA" is always assumed to
+	   be the value of the stack pointer in the caller.  This means
+	   that we must define the CFA of this body of code to be the
+	   saved value of the stack pointer in the sigcontext.  Which
+	   also means that there is no fixed relation to the other 
+	   saved registers, which means that we must use DW_CFA_expression
+	   to compute their addresses.  It also means that when we 
+	   adjust the stack with the popl, we have to do it all over again.  */
+
+#define do_cfa_expr(offset)						\
+	.byte 0x0f;			/* DW_CFA_def_cfa_expression */	\
+	.uleb128 1f-0f;			/*   length */			\
+0:	.byte 0x74;			/*     DW_OP_breg4 */		\
+	.sleb128 offset;		/*      offset */		\
+	.byte 0x06;			/*     DW_OP_deref */		\
+1:
+
+#define do_expr(regno, offset)						\
+	.byte 0x10;			/* DW_CFA_expression */		\
+	.uleb128 regno;			/*   regno */			\
+	.uleb128 1f-0f;			/*   length */			\
+0:	.byte 0x74;			/*     DW_OP_breg4 */		\
+	.sleb128 offset;		/*       offset */		\
+1:
+
+	do_cfa_expr(SIGCONTEXT_esp+4)
+	do_expr(0, SIGCONTEXT_eax+4)
+	do_expr(1, SIGCONTEXT_ecx+4)
+	do_expr(2, SIGCONTEXT_edx+4)
+	do_expr(3, SIGCONTEXT_ebx+4)
+	do_expr(5, SIGCONTEXT_ebp+4)
+	do_expr(6, SIGCONTEXT_esi+4)
+	do_expr(7, SIGCONTEXT_edi+4)
+	do_expr(8, SIGCONTEXT_eip+4)
+
+	.byte 0x42	/* DW_CFA_advance_loc 2 -- nop; popl eax. */
+
+	do_cfa_expr(SIGCONTEXT_esp)
+	do_expr(0, SIGCONTEXT_eax)
+	do_expr(1, SIGCONTEXT_ecx)
+	do_expr(2, SIGCONTEXT_edx)
+	do_expr(3, SIGCONTEXT_ebx)
+	do_expr(5, SIGCONTEXT_ebp)
+	do_expr(6, SIGCONTEXT_esi)
+	do_expr(7, SIGCONTEXT_edi)
+	do_expr(8, SIGCONTEXT_eip)
+
+	.align 4
+.LENDFDEDLSI1:
+
+	.long .LENDFDEDLSI2-.LSTARTFDEDLSI2 /* Length FDE */
+.LSTARTFDEDLSI2:
+	.long .LSTARTFDEDLSI2-.LSTARTFRAMEDLSI1 /* CIE pointer */
+	/* HACK: See above wrt unwind library assumptions.  */
+	.long .LSTART_rt_sigreturn-1-.	/* PC-relative start address */
+	.long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1
+	.uleb128 0			/* Augmentation */
+	/* What follows are the instructions for the table generation.
+	   We record the locations of each register saved.  This is
+	   slightly less complicated than the above, since we don't
+	   modify the stack pointer in the process.  */
+
+	do_cfa_expr(RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_esp)
+	do_expr(0, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_eax)
+	do_expr(1, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_ecx)
+	do_expr(2, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_edx)
+	do_expr(3, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_ebx)
+	do_expr(5, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_ebp)
+	do_expr(6, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_esi)
+	do_expr(7, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_edi)
+	do_expr(8, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_eip)
+
+	.align 4
+.LENDFDEDLSI2:
+	.previous
diff --git a/arch/i386/kernel/vsyscall-sysenter.S b/arch/i386/kernel/vsyscall-sysenter.S
new file mode 100644
index 000000000000..4daefb2ec1b2
--- /dev/null
+++ b/arch/i386/kernel/vsyscall-sysenter.S
@@ -0,0 +1,104 @@
+/*
+ * Code for the vsyscall page.  This version uses the sysenter instruction.
+ *
+ * NOTE:
+ * 1) __kernel_vsyscall _must_ be first in this page.
+ * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S
+ *    for details.
+ */
+
+	.text
+	.globl __kernel_vsyscall
+	.type __kernel_vsyscall,@function
+__kernel_vsyscall:
+.LSTART_vsyscall:
+	push %ecx
+.Lpush_ecx:
+	push %edx
+.Lpush_edx:
+	push %ebp
+.Lenter_kernel:
+	movl %esp,%ebp
+	sysenter
+
+	/* 7: align return point with nop's to make disassembly easier */
+	.space 7,0x90
+
+	/* 14: System call restart point is here! (SYSENTER_RETURN - 2) */
+	jmp .Lenter_kernel
+	/* 16: System call normal return point is here! */
+	.globl SYSENTER_RETURN	/* Symbol used by entry.S.  */
+SYSENTER_RETURN:
+	pop %ebp
+.Lpop_ebp:
+	pop %edx
+.Lpop_edx:
+	pop %ecx
+.Lpop_ecx:
+	ret
+.LEND_vsyscall:
+	.size __kernel_vsyscall,.-.LSTART_vsyscall
+	.previous
+
+	.section .eh_frame,"a",@progbits
+.LSTARTFRAMEDLSI:
+	.long .LENDCIEDLSI-.LSTARTCIEDLSI
+.LSTARTCIEDLSI:
+	.long 0			/* CIE ID */
+	.byte 1			/* Version number */
+	.string "zR"		/* NUL-terminated augmentation string */
+	.uleb128 1		/* Code alignment factor */
+	.sleb128 -4		/* Data alignment factor */
+	.byte 8			/* Return address register column */
+	.uleb128 1		/* Augmentation value length */
+	.byte 0x1b		/* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */
+	.byte 0x0c		/* DW_CFA_def_cfa */
+	.uleb128 4
+	.uleb128 4
+	.byte 0x88		/* DW_CFA_offset, column 0x8 */
+	.uleb128 1
+	.align 4
+.LENDCIEDLSI:
+	.long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */
+.LSTARTFDEDLSI:
+	.long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */
+	.long .LSTART_vsyscall-.	/* PC-relative start address */
+	.long .LEND_vsyscall-.LSTART_vsyscall
+	.uleb128 0
+	/* What follows are the instructions for the table generation.
+	   We have to record all changes of the stack pointer.  */
+	.byte 0x04		/* DW_CFA_advance_loc4 */
+	.long .Lpush_ecx-.LSTART_vsyscall
+	.byte 0x0e		/* DW_CFA_def_cfa_offset */
+	.byte 0x08		/* RA at offset 8 now */
+	.byte 0x04		/* DW_CFA_advance_loc4 */
+	.long .Lpush_edx-.Lpush_ecx
+	.byte 0x0e		/* DW_CFA_def_cfa_offset */
+	.byte 0x0c		/* RA at offset 12 now */
+	.byte 0x04		/* DW_CFA_advance_loc4 */
+	.long .Lenter_kernel-.Lpush_edx
+	.byte 0x0e		/* DW_CFA_def_cfa_offset */
+	.byte 0x10		/* RA at offset 16 now */
+	.byte 0x85, 0x04	/* DW_CFA_offset %ebp -16 */
+	/* Finally the epilogue.  */
+	.byte 0x04		/* DW_CFA_advance_loc4 */
+	.long .Lpop_ebp-.Lenter_kernel
+	.byte 0x0e		/* DW_CFA_def_cfa_offset */
+	.byte 0x0c		/* RA at offset 12 now */
+	.byte 0xc5		/* DW_CFA_restore %ebp */
+	.byte 0x04		/* DW_CFA_advance_loc4 */
+	.long .Lpop_edx-.Lpop_ebp
+	.byte 0x0e		/* DW_CFA_def_cfa_offset */
+	.byte 0x08		/* RA at offset 8 now */
+	.byte 0x04		/* DW_CFA_advance_loc4 */
+	.long .Lpop_ecx-.Lpop_edx
+	.byte 0x0e		/* DW_CFA_def_cfa_offset */
+	.byte 0x04		/* RA at offset 4 now */
+	.align 4
+.LENDFDEDLSI:
+	.previous
+
+/*
+ * Get the common code for the sigreturn entry points.
+ */
+#include "vsyscall-sigreturn.S"
diff --git a/arch/i386/kernel/vsyscall.S b/arch/i386/kernel/vsyscall.S
new file mode 100644
index 000000000000..b403890fe39b
--- /dev/null
+++ b/arch/i386/kernel/vsyscall.S
@@ -0,0 +1,15 @@
+#include <linux/init.h>
+
+__INITDATA
+
+	.globl vsyscall_int80_start, vsyscall_int80_end
+vsyscall_int80_start:
+	.incbin "arch/i386/kernel/vsyscall-int80.so"
+vsyscall_int80_end:
+
+	.globl vsyscall_sysenter_start, vsyscall_sysenter_end
+vsyscall_sysenter_start:
+	.incbin "arch/i386/kernel/vsyscall-sysenter.so"
+vsyscall_sysenter_end:
+
+__FINIT
diff --git a/arch/i386/kernel/vsyscall.lds.S b/arch/i386/kernel/vsyscall.lds.S
new file mode 100644
index 000000000000..3a8329d6536e
--- /dev/null
+++ b/arch/i386/kernel/vsyscall.lds.S
@@ -0,0 +1,65 @@
+/*
+ * Linker script for vsyscall DSO.  The vsyscall page is an ELF shared
+ * object prelinked to its virtual address, and with only one read-only
+ * segment (that fits in one page).  This script controls its layout.
+ */
+#include <asm/asm_offsets.h>
+
+SECTIONS
+{
+  . = VSYSCALL_BASE + SIZEOF_HEADERS;
+
+  .hash           : { *(.hash) }		:text
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+
+  /* This linker script is used both with -r and with -shared.
+     For the layouts to match, we need to skip more than enough
+     space for the dynamic symbol table et al.  If this amount
+     is insufficient, ld -shared will barf.  Just increase it here.  */
+  . = VSYSCALL_BASE + 0x400;
+
+  .text           : { *(.text) }		:text =0x90909090
+
+  .eh_frame_hdr   : { *(.eh_frame_hdr) }	:text :eh_frame_hdr
+  .eh_frame       : { KEEP (*(.eh_frame)) }	:text
+  .dynamic        : { *(.dynamic) }		:text :dynamic
+  .useless        : {
+  	*(.got.plt) *(.got)
+	*(.data .data.* .gnu.linkonce.d.*)
+	*(.dynbss)
+	*(.bss .bss.* .gnu.linkonce.b.*)
+  }						:text
+}
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+  text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
+  dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+  eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+  LINUX_2.5 {
+    global:
+    	__kernel_vsyscall;
+    	__kernel_sigreturn;
+    	__kernel_rt_sigreturn;
+
+    local: *;
+  };
+}
+
+/* The ELF entry point can be used to set the AT_SYSINFO value.  */
+ENTRY(__kernel_vsyscall);