Updated bundled zlib to version 1.2.3.5v1.7.8

12 files changed, 218 insertions, 1232 deletions

diff --git a/deflate.c b/deflate.c
index db01adfec..d34e1add3 100644
--- a/deflate.c
+++ b/deflate.c
@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2009 Jean-loup Gailly.
+ * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.3.4 Copyright 1995-2009 Jean-loup Gailly ";
+   " deflate 1.2.3.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -79,19 +79,18 @@ local block_state deflate_fast   OF((deflate_state *s, int flush));
 #ifndef FASTEST
 local block_state deflate_slow   OF((deflate_state *s, int flush));
 #endif
+local block_state deflate_rle    OF((deflate_state *s, int flush));
+local block_state deflate_huff   OF((deflate_state *s, int flush));
 local void lm_init        OF((deflate_state *s));
 local void putShortMSB    OF((deflate_state *s, uInt b));
 local void flush_pending  OF((z_streamp strm));
 local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
-#ifndef FASTEST
 #ifdef ASMV
       void match_init OF((void)); /* asm code initialization */
       uInt longest_match  OF((deflate_state *s, IPos cur_match));
 #else
 local uInt longest_match  OF((deflate_state *s, IPos cur_match));
 #endif
-#endif
-local uInt longest_match_fast OF((deflate_state *s, IPos cur_match));
 
 #ifdef DEBUG
 local  void check_match OF((deflate_state *s, IPos start, IPos match,
@@ -432,9 +431,10 @@ int ZEXPORT deflateParams(strm, level, strategy)
     }
     func = configuration_table[s->level].func;
 
-    if (func != configuration_table[level].func && strm->total_in != 0) {
+    if ((strategy != s->strategy || func != configuration_table[level].func) &&
+        strm->total_in != 0) {
         /* Flush the last buffer: */
-        err = deflate(strm, Z_PARTIAL_FLUSH);
+        err = deflate(strm, Z_BLOCK);
     }
     if (s->level != level) {
         s->level = level;
@@ -536,7 +536,8 @@ uLong ZEXPORT deflateBound(strm, sourceLen)
         return complen + wraplen;
 
     /* default settings: return tight bound for that case */
-    return compressBound(sourceLen) - 6 + wraplen;
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13 - 6 + wraplen;
 }
 
 /* =========================================================================
@@ -816,7 +817,9 @@ int ZEXPORT deflate (strm, flush)
         (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
         block_state bstate;
 
-        bstate = (*(configuration_table[s->level].func))(s, flush);
+        bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
+                    (s->strategy == Z_RLE ? deflate_rle(s, flush) :
+                        (*(configuration_table[s->level].func))(s, flush));
 
         if (bstate == finish_started || bstate == finish_done) {
             s->status = FINISH_STATE;
@@ -1200,12 +1203,13 @@ local uInt longest_match(s, cur_match)
     return s->lookahead;
 }
 #endif /* ASMV */
-#endif /* FASTEST */
+
+#else /* FASTEST */
 
 /* ---------------------------------------------------------------------------
- * Optimized version for level == 1 or strategy == Z_RLE only
+ * Optimized version for FASTEST only
  */
-local uInt longest_match_fast(s, cur_match)
+local uInt longest_match(s, cur_match)
     deflate_state *s;
     IPos cur_match;                             /* current match */
 {
@@ -1258,6 +1262,8 @@ local uInt longest_match_fast(s, cur_match)
     return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
 }
 
+#endif /* FASTEST */
+
 #ifdef DEBUG
 /* ===========================================================================
  * Check that the match at match_start is indeed a match.
@@ -1336,7 +1342,6 @@ local void fill_window(s)
                later. (Using level 0 permanently is not an optimal usage of
                zlib, so we don't care about this pathological case.)
              */
-            /* %%% avoid this when Z_RLE */
             n = s->hash_size;
             p = &s->head[n];
             do {
@@ -1516,7 +1521,7 @@ local block_state deflate_fast(s, flush)
     deflate_state *s;
     int flush;
 {
-    IPos hash_head = NIL; /* head of the hash chain */
+    IPos hash_head;       /* head of the hash chain */
     int bflush;           /* set if current block must be flushed */
 
     for (;;) {
@@ -1536,6 +1541,7 @@ local block_state deflate_fast(s, flush)
         /* Insert the string window[strstart .. strstart+2] in the
          * dictionary, and set hash_head to the head of the hash chain:
          */
+        hash_head = NIL;
         if (s->lookahead >= MIN_MATCH) {
             INSERT_STRING(s, s->strstart, hash_head);
         }
@@ -1548,19 +1554,8 @@ local block_state deflate_fast(s, flush)
              * of window index 0 (in particular we have to avoid a match
              * of the string with itself at the start of the input file).
              */
-#ifdef FASTEST
-            if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) ||
-                (s->strategy == Z_RLE && s->strstart - hash_head == 1)) {
-                s->match_length = longest_match_fast (s, hash_head);
-            }
-#else
-            if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
-                s->match_length = longest_match (s, hash_head);
-            } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
-                s->match_length = longest_match_fast (s, hash_head);
-            }
-#endif
-            /* longest_match() or longest_match_fast() sets match_start */
+            s->match_length = longest_match (s, hash_head);
+            /* longest_match() sets match_start */
         }
         if (s->match_length >= MIN_MATCH) {
             check_match(s, s->strstart, s->match_start, s->match_length);
@@ -1622,7 +1617,7 @@ local block_state deflate_slow(s, flush)
     deflate_state *s;
     int flush;
 {
-    IPos hash_head = NIL;    /* head of hash chain */
+    IPos hash_head;          /* head of hash chain */
     int bflush;              /* set if current block must be flushed */
 
     /* Process the input block. */
@@ -1643,6 +1638,7 @@ local block_state deflate_slow(s, flush)
         /* Insert the string window[strstart .. strstart+2] in the
          * dictionary, and set hash_head to the head of the hash chain:
          */
+        hash_head = NIL;
         if (s->lookahead >= MIN_MATCH) {
             INSERT_STRING(s, s->strstart, hash_head);
         }
@@ -1658,12 +1654,8 @@ local block_state deflate_slow(s, flush)
              * of window index 0 (in particular we have to avoid a match
              * of the string with itself at the start of the input file).
              */
-            if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
-                s->match_length = longest_match (s, hash_head);
-            } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
-                s->match_length = longest_match_fast (s, hash_head);
-            }
-            /* longest_match() or longest_match_fast() sets match_start */
+            s->match_length = longest_match (s, hash_head);
+            /* longest_match() sets match_start */
 
             if (s->match_length <= 5 && (s->strategy == Z_FILTERED
 #if TOO_FAR <= 32767
@@ -1741,7 +1733,6 @@ local block_state deflate_slow(s, flush)
 }
 #endif /* FASTEST */
 
-#if 0
 /* ===========================================================================
  * For Z_RLE, simply look for runs of bytes, generate matches only of distance
  * one.  Do not maintain a hash table.  (It will be regenerated if this run of
@@ -1751,11 +1742,9 @@ local block_state deflate_rle(s, flush)
     deflate_state *s;
     int flush;
 {
-    int bflush;         /* set if current block must be flushed */
-    uInt run;           /* length of run */
-    uInt max;           /* maximum length of run */
-    uInt prev;          /* byte at distance one to match */
-    Bytef *scan;        /* scan for end of run */
+    int bflush;             /* set if current block must be flushed */
+    uInt prev;              /* byte at distance one to match */
+    Bytef *scan, *strend;   /* scan goes up to strend for length of run */
 
     for (;;) {
         /* Make sure that we always have enough lookahead, except
@@ -1771,23 +1760,33 @@ local block_state deflate_rle(s, flush)
         }
 
         /* See how many times the previous byte repeats */
-        run = 0;
-        if (s->strstart > 0) {      /* if there is a previous byte, that is */
-            max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH;
+        s->match_length = 0;
+        if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
             scan = s->window + s->strstart - 1;
-            prev = *scan++;
-            do {
-                if (*scan++ != prev)
-                    break;
-            } while (++run < max);
+            prev = *scan;
+            if (prev == *++scan && prev == *++scan && prev == *++scan) {
+                strend = s->window + s->strstart + MAX_MATCH;
+                do {
+                } while (prev == *++scan && prev == *++scan &&
+                         prev == *++scan && prev == *++scan &&
+                         prev == *++scan && prev == *++scan &&
+                         prev == *++scan && prev == *++scan &&
+                         scan < strend);
+                s->match_length = MAX_MATCH - (int)(strend - scan);
+                if (s->match_length > s->lookahead)
+                    s->match_length = s->lookahead;
+            }
         }
 
         /* Emit match if have run of MIN_MATCH or longer, else emit literal */
-        if (run >= MIN_MATCH) {
-            check_match(s, s->strstart, s->strstart - 1, run);
-            _tr_tally_dist(s, 1, run - MIN_MATCH, bflush);
-            s->lookahead -= run;
-            s->strstart += run;
+        if (s->match_length >= MIN_MATCH) {
+            check_match(s, s->strstart, s->strstart - 1, s->match_length);
+
+            _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
+
+            s->lookahead -= s->match_length;
+            s->strstart += s->match_length;
+            s->match_length = 0;
         } else {
             /* No match, output a literal byte */
             Tracevv((stderr,"%c", s->window[s->strstart]));
@@ -1800,4 +1799,36 @@ local block_state deflate_rle(s, flush)
     FLUSH_BLOCK(s, flush == Z_FINISH);
     return flush == Z_FINISH ? finish_done : block_done;
 }
-#endif
+
+/* ===========================================================================
+ * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
+ * (It will be regenerated if this run of deflate switches away from Huffman.)
+ */
+local block_state deflate_huff(s, flush)
+    deflate_state *s;
+    int flush;
+{
+    int bflush;             /* set if current block must be flushed */
+
+    for (;;) {
+        /* Make sure that we have a literal to write. */
+        if (s->lookahead == 0) {
+            fill_window(s);
+            if (s->lookahead == 0) {
+                if (flush == Z_NO_FLUSH)
+                    return need_more;
+                break;      /* flush the current block */
+            }
+        }
+
+        /* Output a literal byte */
+        s->match_length = 0;
+        Tracevv((stderr,"%c", s->window[s->strstart]));
+        _tr_tally_lit (s, s->window[s->strstart], bflush);
+        s->lookahead--;
+        s->strstart++;
+        if (bflush) FLUSH_BLOCK(s, 0);
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
diff --git a/gzio.c b/gzio.c
deleted file mode 100644
index cf55486dd..000000000
--- a/gzio.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-/* gzio.c -- IO on .gz files
- * Copyright (C) 1995-2009 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- *
- * Compile this file with -DNO_GZCOMPRESS to avoid the compression code.
- */
-
-/* @(#) $Id$ */
-
-#ifdef _LARGEFILE64_SOURCE
-#  ifndef _LARGEFILE_SOURCE
-#    define _LARGEFILE_SOURCE
-#  endif
-#  ifdef _FILE_OFFSET_BITS
-#    undef _FILE_OFFSET_BITS
-#  endif
-#endif
-
-#include "zutil.h"
-#include <stdio.h>
-
-#ifdef NO_DEFLATE       /* for compatibility with old definition */
-#  define NO_GZCOMPRESS
-#endif
-
-#ifndef NO_DUMMY_DECL
-struct internal_state {int dummy;}; /* for buggy compilers */
-#endif
-
-#ifndef Z_BUFSIZE
-#  ifdef MAXSEG_64K
-#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
-#  else
-#    define Z_BUFSIZE 16384
-#  endif
-#endif
-#ifndef Z_PRINTF_BUFSIZE
-#  define Z_PRINTF_BUFSIZE 4096
-#endif
-
-#ifdef __MVS__
-#  pragma map (fdopen , "\174\174FDOPEN")
-   FILE *fdopen(int, const char *);
-#endif
-
-#ifndef STDC
-extern voidp  malloc OF((uInt size));
-extern void   free   OF((voidpf ptr));
-#endif
-
-#ifdef NO_FSEEKO
-#  define FSEEK fseek
-#  define FTELL ftell
-#else
-#  define FSEEK fseeko
-#  define FTELL ftello
-#endif
-
-#define ALLOC(size) malloc(size)
-#define TRYFREE(p) {if (p) free(p);}
-
-static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define HEAD_CRC     0x02 /* bit 1 set: header CRC present */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define RESERVED     0xE0 /* bits 5..7: reserved */
-
-typedef struct gz_stream {
-    z_stream stream;
-    int         z_err;      /* error code for last stream operation */
-    int         z_eof;      /* set if end of input file */
-    FILE        *file;      /* .gz file */
-    Byte        *inbuf;     /* input buffer */
-    Byte        *outbuf;    /* output buffer */
-    uLong       crc;        /* crc32 of uncompressed data */
-    char        *msg;       /* error message */
-    char        *path;      /* path name for debugging only */
-    int         transparent; /* 1 if input file is not a .gz file */
-    char        mode;       /* 'w' or 'r' */
-    z_off64_t   start;      /* start of compressed data in file */
-    z_off64_t   in;         /* bytes into deflate or inflate */
-    z_off64_t   out;        /* bytes out of deflate or inflate */
-    int         back;       /* one character push-back */
-    int         last;       /* true if push-back is last character */
-} gz_stream;
-
-
-local gzFile gz_open      OF((const char *, const char *, int, int));
-local z_off64_t  gz_seek  OF((gzFile, z_off64_t, int, int));
-local int    do_flush     OF((gzFile, int));
-local int    get_byte     OF((gz_stream *));
-local void   check_header OF((gz_stream *));
-local int    destroy      OF((gz_stream *));
-local void   putLong      OF((FILE *, uLong));
-local uLong  getLong      OF((gz_stream *));
-
-/* ===========================================================================
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb"). The file is given either by file descriptor
-   or path name (if fd == -1).
-     gz_open returns NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression state; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).
-*/
-local gzFile gz_open (path, mode, fd, use64)
-    const char *path;
-    const char *mode;
-    int  fd;
-    int use64;
-{
-    int err;
-    int level = Z_DEFAULT_COMPRESSION; /* compression level */
-    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
-    char *p = (char*)mode;
-    gz_stream *s;
-    char fmode[80]; /* copy of mode, without the compression level */
-    char *m = fmode;
-
-    if (!path || !mode) return Z_NULL;
-
-    s = (gz_stream *)ALLOC(sizeof(gz_stream));
-    if (!s) return Z_NULL;
-
-    s->stream.zalloc = (alloc_func)0;
-    s->stream.zfree = (free_func)0;
-    s->stream.opaque = (voidpf)0;
-    s->stream.next_in = s->inbuf = Z_NULL;
-    s->stream.next_out = s->outbuf = Z_NULL;
-    s->stream.avail_in = s->stream.avail_out = 0;
-    s->stream.state = Z_NULL;
-    s->file = NULL;
-    s->z_err = Z_OK;
-    s->z_eof = 0;
-    s->in = 0;
-    s->out = 0;
-    s->back = EOF;
-    s->crc = crc32(0L, Z_NULL, 0);
-    s->msg = NULL;
-    s->transparent = 0;
-
-    s->path = (char*)ALLOC(strlen(path)+1);
-    if (s->path == NULL) {
-        return destroy(s), (gzFile)Z_NULL;
-    }
-    strcpy(s->path, path); /* do this early for debugging */
-
-    s->mode = '\0';
-    do {
-        if (*p == 'r') s->mode = 'r';
-        if (*p == 'w' || *p == 'a') s->mode = 'w';
-        if (*p >= '0' && *p <= '9') {
-            level = *p - '0';
-        } else if (*p == 'f') {
-          strategy = Z_FILTERED;
-        } else if (*p == 'h') {
-          strategy = Z_HUFFMAN_ONLY;
-        } else if (*p == 'R') {
-          strategy = Z_RLE;
-        } else {
-            *m++ = *p; /* copy the mode */
-        }
-    } while (*p++ && m != fmode + sizeof(fmode));
-    if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
-
-    if (s->mode == 'w') {
-#ifdef NO_GZCOMPRESS
-        err = Z_STREAM_ERROR;
-#else
-        err = deflateInit2(&(s->stream), level,
-                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
-        /* windowBits is passed < 0 to suppress zlib header */
-
-        s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-#endif
-        if (err != Z_OK || s->outbuf == Z_NULL) {
-            return destroy(s), (gzFile)Z_NULL;
-        }
-    } else {
-        s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
-
-        err = inflateInit2(&(s->stream), -MAX_WBITS);
-        /* windowBits is passed < 0 to tell that there is no zlib header */
-        if (err != Z_OK || s->inbuf == Z_NULL) {
-            return destroy(s), (gzFile)Z_NULL;
-        }
-    }
-    s->stream.avail_out = Z_BUFSIZE;
-
-    errno = 0;
-    s->file = fd < 0 ? (use64 ? F_OPEN64(path, fmode) : F_OPEN(path, fmode)) :
-              (FILE*)fdopen(fd, fmode);
-
-    if (s->file == NULL) {
-        return destroy(s), (gzFile)Z_NULL;
-    }
-    if (s->mode == 'w') {
-        /* Write a very simple .gz header:
-         */
-        fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
-             Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, level == 9 ? 2 :
-                            (strategy >= Z_HUFFMAN_ONLY ||
-                             (level != Z_DEFAULT_COMPRESSION && level < 2) ?
-                             4 : 0) /*xflags*/, OS_CODE);
-        s->start = 10L;
-        /* We use 10L instead of ftell(s->file) to because ftell causes an
-         * fflush on some systems. This version of the library doesn't use
-         * start anyway in write mode, so this initialization is not
-         * necessary.
-         */
-    } else {
-        check_header(s); /* skip the .gz header */
-        s->start = FTELL(s->file) - s->stream.avail_in;
-    }
-
-    return (gzFile)s;
-}
-
-/* ===========================================================================
-     Opens a gzip (.gz) file for reading or writing.
-*/
-gzFile ZEXPORT gzopen (path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open (path, mode, -1, 0);
-}
-
-/* ===========================================================================
-     Opens a gzip (.gz) file for reading or writing for 64-bit offsets
-*/
-gzFile ZEXPORT gzopen64 (path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open (path, mode, -1, 1);
-}
-
-/* ===========================================================================
-     Associate a gzFile with the file descriptor fd. fd is not dup'ed here
-   to mimic the behavio(u)r of fdopen.
-*/
-gzFile ZEXPORT gzdopen (fd, mode)
-    int fd;
-    const char *mode;
-{
-    char name[46];      /* allow for up to 128-bit integers */
-
-    if (fd < 0) return (gzFile)Z_NULL;
-    sprintf(name, "<fd:%d>", fd); /* for debugging */
-
-    return gz_open (name, mode, fd, 0);
-}
-
-/* ===========================================================================
- * Update the compression level and strategy
- */
-int ZEXPORT gzsetparams (file, level, strategy)
-    gzFile file;
-    int level;
-    int strategy;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
-    /* Make room to allow flushing */
-    if (s->stream.avail_out == 0) {
-
-        s->stream.next_out = s->outbuf;
-        if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
-            s->z_err = Z_ERRNO;
-        }
-        s->stream.avail_out = Z_BUFSIZE;
-    }
-
-    return deflateParams (&(s->stream), level, strategy);
-}
-
-/* ===========================================================================
-     Read a byte from a gz_stream; update next_in and avail_in. Return EOF
-   for end of file.
-   IN assertion: the stream s has been successfully opened for reading.
-*/
-local int get_byte(s)
-    gz_stream *s;
-{
-    if (s->z_eof) return EOF;
-    if (s->stream.avail_in == 0) {
-        errno = 0;
-        s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
-        if (s->stream.avail_in == 0) {
-            s->z_eof = 1;
-            if (ferror(s->file)) s->z_err = Z_ERRNO;
-            return EOF;
-        }
-        s->stream.next_in = s->inbuf;
-    }
-    s->stream.avail_in--;
-    return *(s->stream.next_in)++;
-}
-
-/* ===========================================================================
-      Check the gzip header of a gz_stream opened for reading. Set the stream
-    mode to transparent if the gzip magic header is not present; set s->err
-    to Z_DATA_ERROR if the magic header is present but the rest of the header
-    is incorrect.
-    IN assertion: the stream s has already been created successfully;
-       s->stream.avail_in is zero for the first time, but may be non-zero
-       for concatenated .gz files.
-*/
-local void check_header(s)
-    gz_stream *s;
-{
-    int method; /* method byte */
-    int flags;  /* flags byte */
-    uInt len;
-    int c;
-
-    /* Assure two bytes in the buffer so we can peek ahead -- handle case
-       where first byte of header is at the end of the buffer after the last
-       gzip segment */
-    len = s->stream.avail_in;
-    if (len < 2) {
-        if (len) s->inbuf[0] = s->stream.next_in[0];
-        errno = 0;
-        len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
-        if (len == 0) s->z_eof = 1;
-        if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;
-        s->stream.avail_in += len;
-        s->stream.next_in = s->inbuf;
-        if (s->stream.avail_in < 2) {
-            s->transparent = s->stream.avail_in;
-            return;
-        }
-    }
-
-    /* Peek ahead to check the gzip magic header */
-    if (s->stream.next_in[0] != gz_magic[0] ||
-        s->stream.next_in[1] != gz_magic[1]) {
-        s->transparent = 1;
-        return;
-    }
-    s->stream.avail_in -= 2;
-    s->stream.next_in += 2;
-
-    /* Check the rest of the gzip header */
-    method = get_byte(s);
-    flags = get_byte(s);
-    if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
-        s->z_err = Z_DATA_ERROR;
-        return;
-    }
-
-    /* Discard time, xflags and OS code: */
-    for (len = 0; len < 6; len++) (void)get_byte(s);
-
-    if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
-        len  =  (uInt)get_byte(s);
-        len += ((uInt)get_byte(s))<<8;
-        /* len is garbage if EOF but the loop below will quit anyway */
-        while (len-- != 0 && get_byte(s) != EOF) ;
-    }
-    if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
-        while ((c = get_byte(s)) != 0 && c != EOF) ;
-    }
-    if ((flags & COMMENT) != 0) {   /* skip the .gz file comment */
-        while ((c = get_byte(s)) != 0 && c != EOF) ;
-    }
-    if ((flags & HEAD_CRC) != 0) {  /* skip the header crc */
-        for (len = 0; len < 2; len++) (void)get_byte(s);
-    }
-    s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
-}
-
- /* ===========================================================================
- * Cleanup then free the given gz_stream. Return a zlib error code.
-   Try freeing in the reverse order of allocations.
- */
-local int destroy (s)
-    gz_stream *s;
-{
-    int err = Z_OK;
-
-    if (!s) return Z_STREAM_ERROR;
-
-    TRYFREE(s->msg);
-
-    if (s->stream.state != NULL) {
-        if (s->mode == 'w') {
-#ifdef NO_GZCOMPRESS
-            err = Z_STREAM_ERROR;
-#else
-            err = deflateEnd(&(s->stream));
-#endif
-        } else if (s->mode == 'r') {
-            err = inflateEnd(&(s->stream));
-        }
-    }
-    if (s->file != NULL && fclose(s->file)) {
-#ifdef ESPIPE
-        if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
-#endif
-            err = Z_ERRNO;
-    }
-    if (s->z_err < 0) err = s->z_err;
-
-    TRYFREE(s->inbuf);
-    TRYFREE(s->outbuf);
-    TRYFREE(s->path);
-    TRYFREE(s);
-    return err;
-}
-
-/* ===========================================================================
-     Reads the given number of uncompressed bytes from the compressed file.
-   gzread returns the number of bytes actually read (0 for end of file).
-*/
-int ZEXPORT gzread (file, buf, len)
-    gzFile file;
-    voidp buf;
-    unsigned len;
-{
-    gz_stream *s = (gz_stream*)file;
-    Bytef *start = (Bytef*)buf; /* starting point for crc computation */
-    Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */
-
-    if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
-
-    if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
-    if (s->z_err == Z_STREAM_END || s->z_eof) return 0;  /* EOF */
-
-    next_out = (Byte*)buf;
-    s->stream.next_out = (Bytef*)buf;
-    s->stream.avail_out = len;
-
-    if (s->stream.avail_out && s->back != EOF) {
-        *next_out++ = s->back;
-        s->stream.next_out++;
-        s->stream.avail_out--;
-        s->back = EOF;
-        s->out++;
-        start++;
-        if (s->last) {
-            s->z_err = Z_STREAM_END;
-            return 1;
-        }
-    }
-
-    while (s->stream.avail_out != 0) {
-
-        if (s->transparent) {
-            /* Copy first the lookahead bytes: */
-            uInt n = s->stream.avail_in;
-            if (n > s->stream.avail_out) n = s->stream.avail_out;
-            if (n > 0) {
-                zmemcpy(s->stream.next_out, s->stream.next_in, n);
-                next_out += n;
-                s->stream.next_out = next_out;
-                s->stream.next_in   += n;
-                s->stream.avail_out -= n;
-                s->stream.avail_in  -= n;
-            }
-            if (s->stream.avail_out > 0 && !feof(s->file)) {
-                s->stream.avail_out -=
-                    (uInt)fread(next_out, 1, s->stream.avail_out, s->file);
-            }
-            len -= s->stream.avail_out;
-            s->in  += len;
-            s->out += len;
-            if (feof(s->file)) s->z_eof = 1;
-            return (int)len;
-        }
-        if (s->stream.avail_in == 0 && !s->z_eof) {
-
-            errno = 0;
-            s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
-            if (s->stream.avail_in == 0) {
-                s->z_eof = 1;
-                if (ferror(s->file)) {
-                    s->z_err = Z_ERRNO;
-                    break;
-                }
-            }
-            s->stream.next_in = s->inbuf;
-        }
-        s->in += s->stream.avail_in;
-        s->out += s->stream.avail_out;
-        s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
-        s->in -= s->stream.avail_in;
-        s->out -= s->stream.avail_out;
-
-        if (s->z_err == Z_STREAM_END) {
-            /* Check CRC and original size */
-            s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
-            start = s->stream.next_out;
-
-            if (getLong(s) != s->crc) {
-                s->z_err = Z_DATA_ERROR;
-            } else {
-                (void)getLong(s);
-                /* The uncompressed length returned by above getlong() may be
-                 * different from s->out in case of concatenated .gz files.
-                 * Check for such files:
-                 */
-                check_header(s);
-                if (s->z_err == Z_OK) {
-                    inflateReset(&(s->stream));
-                    s->crc = crc32(0L, Z_NULL, 0);
-                }
-            }
-        }
-        if (s->z_err != Z_OK || s->z_eof) break;
-    }
-    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
-
-    if (len == s->stream.avail_out &&
-        (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))
-        return -1;
-    return (int)(len - s->stream.avail_out);
-}
-
-
-/* ===========================================================================
-      Reads one byte from the compressed file. gzgetc returns this byte
-   or -1 in case of end of file or error.
-*/
-int ZEXPORT gzgetc(file)
-    gzFile file;
-{
-    unsigned char c;
-
-    return gzread(file, &c, 1) == 1 ? c : -1;
-}
-
-
-/* ===========================================================================
-      Push one byte back onto the stream.
-*/
-int ZEXPORT gzungetc(c, file)
-    int c;
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'r' || c == EOF || s->back != EOF) return EOF;
-    s->back = c;
-    s->out--;
-    s->last = (s->z_err == Z_STREAM_END);
-    if (s->last) s->z_err = Z_OK;
-    s->z_eof = 0;
-    return c;
-}
-
-
-/* ===========================================================================
-      Reads bytes from the compressed file until len-1 characters are
-   read, or a newline character is read and transferred to buf, or an
-   end-of-file condition is encountered.  The string is then terminated
-   with a null character.
-      gzgets returns buf, or Z_NULL in case of error.
-
-      The current implementation is not optimized at all.
-*/
-char * ZEXPORT gzgets(file, buf, len)
-    gzFile file;
-    char *buf;
-    int len;
-{
-    char *b = buf;
-    if (buf == Z_NULL || len <= 0) return Z_NULL;
-
-    while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
-    *buf = '\0';
-    return b == buf && len > 0 ? Z_NULL : b;
-}
-
-
-#ifndef NO_GZCOMPRESS
-/* ===========================================================================
-     Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of bytes actually written (0 in case of error).
-*/
-int ZEXPORT gzwrite (file, buf, len)
-    gzFile file;
-    voidpc buf;
-    unsigned len;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
-    s->stream.next_in = (Bytef*)buf;
-    s->stream.avail_in = len;
-
-    while (s->stream.avail_in != 0) {
-
-        if (s->stream.avail_out == 0) {
-
-            s->stream.next_out = s->outbuf;
-            if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
-                s->z_err = Z_ERRNO;
-                break;
-            }
-            s->stream.avail_out = Z_BUFSIZE;
-        }
-        s->in += s->stream.avail_in;
-        s->out += s->stream.avail_out;
-        s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
-        s->in -= s->stream.avail_in;
-        s->out -= s->stream.avail_out;
-        if (s->z_err != Z_OK) break;
-    }
-    s->crc = crc32(s->crc, (const Bytef *)buf, len);
-
-    return (int)(len - s->stream.avail_in);
-}
-
-
-/* ===========================================================================
-     Converts, formats, and writes the args to the compressed file under
-   control of the format string, as in fprintf. gzprintf returns the number of
-   uncompressed bytes actually written (0 in case of error).
-*/
-#ifdef STDC
-#include <stdarg.h>
-
-int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
-{
-    char buf[Z_PRINTF_BUFSIZE];
-    va_list va;
-    int len;
-
-    buf[sizeof(buf) - 1] = 0;
-    va_start(va, format);
-#ifdef NO_vsnprintf
-#  ifdef HAS_vsprintf_void
-    (void)vsprintf(buf, format, va);
-    va_end(va);
-    for (len = 0; len < sizeof(buf); len++)
-        if (buf[len] == 0) break;
-#  else
-    len = vsprintf(buf, format, va);
-    va_end(va);
-#  endif
-#else
-#  ifdef HAS_vsnprintf_void
-    (void)vsnprintf(buf, sizeof(buf), format, va);
-    va_end(va);
-    len = strlen(buf);
-#  else
-    len = vsnprintf(buf, sizeof(buf), format, va);
-    va_end(va);
-#  endif
-#endif
-    if (len <= 0 || len >= (int)sizeof(buf) || buf[sizeof(buf) - 1] != 0)
-        return 0;
-    return gzwrite(file, buf, (unsigned)len);
-}
-#else /* not ANSI C */
-
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
-    gzFile file;
-    const char *format;
-    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
-    char buf[Z_PRINTF_BUFSIZE];
-    int len;
-
-    buf[sizeof(buf) - 1] = 0;
-#ifdef NO_snprintf
-#  ifdef HAS_sprintf_void
-    sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
-            a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    for (len = 0; len < sizeof(buf); len++)
-        if (buf[len] == 0) break;
-#  else
-    len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
-                a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#else
-#  ifdef HAS_snprintf_void
-    snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
-             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    len = strlen(buf);
-#  else
-    len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
-                 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#endif
-    if (len <= 0 || len >= sizeof(buf) || buf[sizeof(buf) - 1] != 0)
-        return 0;
-    return gzwrite(file, buf, len);
-}
-#endif
-
-/* ===========================================================================
-      Writes c, converted to an unsigned char, into the compressed file.
-   gzputc returns the value that was written, or -1 in case of error.
-*/
-int ZEXPORT gzputc(file, c)
-    gzFile file;
-    int c;
-{
-    unsigned char cc = (unsigned char) c; /* required for big endian systems */
-
-    return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
-}
-
-
-/* ===========================================================================
-      Writes the given null-terminated string to the compressed file, excluding
-   the terminating null character.
-      gzputs returns the number of characters written, or -1 in case of error.
-*/
-int ZEXPORT gzputs(file, s)
-    gzFile file;
-    const char *s;
-{
-    return gzwrite(file, (char*)s, (unsigned)strlen(s));
-}
-
-
-/* ===========================================================================
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the deflate() function.
-*/
-local int do_flush (file, flush)
-    gzFile file;
-    int flush;
-{
-    uInt len;
-    int done = 0;
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
-    s->stream.avail_in = 0; /* should be zero already anyway */
-
-    for (;;) {
-        len = Z_BUFSIZE - s->stream.avail_out;
-
-        if (len != 0) {
-            if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
-                s->z_err = Z_ERRNO;
-                return Z_ERRNO;
-            }
-            s->stream.next_out = s->outbuf;
-            s->stream.avail_out = Z_BUFSIZE;
-        }
-        if (done) break;
-        s->out += s->stream.avail_out;
-        s->z_err = deflate(&(s->stream), flush);
-        s->out -= s->stream.avail_out;
-
-        /* Ignore the second of two consecutive flushes: */
-        if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
-
-        /* deflate has finished flushing only when it hasn't used up
-         * all the available space in the output buffer:
-         */
-        done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
-
-        if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
-    }
-    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
-}
-
-int ZEXPORT gzflush (file, flush)
-     gzFile file;
-     int flush;
-{
-    gz_stream *s = (gz_stream*)file;
-    int err = do_flush (file, flush);
-
-    if (err) return err;
-    fflush(s->file);
-    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
-}
-#endif /* NO_GZCOMPRESS */
-
-/* ===========================================================================
-      Sets the starting position for the next gzread or gzwrite on the given
-   compressed file. The offset represents a number of bytes in the
-      gzseek returns the resulting offset location as measured in bytes from
-   the beginning of the uncompressed stream, or -1 in case of error.
-      SEEK_END is not implemented, returns error.
-      In this version of the library, gzseek can be extremely slow.
-*/
-local z_off64_t gz_seek (file, offset, whence, use64)
-    gzFile file;
-    z_off64_t offset;
-    int whence;
-    int use64;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || whence == SEEK_END ||
-        s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
-        return -1L;
-    }
-
-    if (s->mode == 'w') {
-#ifdef NO_GZCOMPRESS
-        return -1L;
-#else
-        if (whence == SEEK_SET) {
-            offset -= s->in;
-        }
-        if (offset < 0) return -1L;
-
-        /* At this point, offset is the number of zero bytes to write. */
-        if (s->inbuf == Z_NULL) {
-            s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
-            if (s->inbuf == Z_NULL) return -1L;
-            zmemzero(s->inbuf, Z_BUFSIZE);
-        }
-        while (offset > 0)  {
-            uInt size = Z_BUFSIZE;
-            if (offset < Z_BUFSIZE) size = (uInt)offset;
-
-            size = gzwrite(file, s->inbuf, size);
-            if (size == 0) return -1L;
-
-            offset -= size;
-        }
-        return s->in;
-#endif
-    }
-    /* Rest of function is for reading only */
-
-    /* compute absolute position */
-    if (whence == SEEK_CUR) {
-        offset += s->out;
-    }
-    if (offset < 0) return -1L;
-
-    if (s->transparent) {
-        /* map to fseek */
-        s->back = EOF;
-        s->stream.avail_in = 0;
-        s->stream.next_in = s->inbuf;
-#ifdef _LARGEFILE64_SOURCE
-        if ((use64 ? fseeko64(s->file, offset, SEEK_SET) :
-                     FSEEK(s->file, offset, SEEK_SET)) < 0)
-            return -1L;
-#else
-        if (FSEEK(s->file, offset, SEEK_SET) < 0) return -1L;
-#endif
-
-        s->in = s->out = offset;
-        return offset;
-    }
-
-    /* For a negative seek, rewind and use positive seek */
-    if (offset >= s->out) {
-        offset -= s->out;
-    } else if (gzrewind(file) < 0) {
-        return -1L;
-    }
-    /* offset is now the number of bytes to skip. */
-
-    if (offset != 0 && s->outbuf == Z_NULL) {
-        s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-        if (s->outbuf == Z_NULL) return -1L;
-    }
-    if (offset && s->back != EOF) {
-        s->back = EOF;
-        s->out++;
-        offset--;
-        if (s->last) s->z_err = Z_STREAM_END;
-    }
-    while (offset > 0)  {
-        int size = Z_BUFSIZE;
-        if (offset < Z_BUFSIZE) size = (int)offset;
-
-        size = gzread(file, s->outbuf, (uInt)size);
-        if (size <= 0) return -1L;
-        offset -= size;
-    }
-    return s->out;
-}
-
-/* ===========================================================================
-    Define external functions gzseek() and gzseek64() using local gz_seek().
-*/
-z_off_t ZEXPORT gzseek (file, offset, whence)
-    gzFile file;
-    z_off_t offset;
-    int whence;
-{
-    return (z_off_t)gz_seek(file, offset, whence, 0);
-}
-
-z_off64_t ZEXPORT gzseek64 (file, offset, whence)
-    gzFile file;
-    z_off64_t offset;
-    int whence;
-{
-#ifdef _LARGEFILE64_SOURCE
-    return gz_seek(file, offset, whence, 1);
-#else
-    return gz_seek(file, offset, whence, 0);
-#endif
-}
-
-/* ===========================================================================
-     Rewinds input file.
-*/
-int ZEXPORT gzrewind (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'r') return -1;
-
-    s->z_err = Z_OK;
-    s->z_eof = 0;
-    s->back = EOF;
-    s->stream.avail_in = 0;
-    s->stream.next_in = s->inbuf;
-    s->crc = crc32(0L, Z_NULL, 0);
-    if (!s->transparent) (void)inflateReset(&s->stream);
-    s->in = 0;
-    s->out = 0;
-    return FSEEK(s->file, s->start, SEEK_SET);
-}
-
-/* ===========================================================================
-     Returns the starting position for the next gzread or gzwrite on the
-   given compressed file. This position represents a number of bytes in the
-   uncompressed data stream.
-*/
-z_off_t ZEXPORT gztell (file)
-    gzFile file;
-{
-    return gzseek(file, 0L, SEEK_CUR);
-}
-
-/* ===========================================================================
-     64-bit version
-*/
-z_off64_t ZEXPORT gztell64 (file)
-    gzFile file;
-{
-    return gzseek64(file, 0L, SEEK_CUR);
-}
-
-/* ===========================================================================
-     Returns 1 when EOF has previously been detected reading the given
-   input stream, otherwise zero.
-*/
-int ZEXPORT gzeof (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    /* With concatenated compressed files that can have embedded
-     * crc trailers, z_eof is no longer the only/best indicator of EOF
-     * on a gz_stream. Handle end-of-stream error explicitly here.
-     */
-    if (s == NULL || s->mode != 'r') return 0;
-    if (s->z_eof) return 1;
-    return s->z_err == Z_STREAM_END;
-}
-
-/* ===========================================================================
-     Returns 1 if reading and doing so transparently, otherwise zero.
-*/
-int ZEXPORT gzdirect (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'r') return 0;
-    return s->transparent;
-}
-
-/* ===========================================================================
-   Outputs a long in LSB order to the given file
-*/
-local void putLong (file, x)
-    FILE *file;
-    uLong x;
-{
-    int n;
-    for (n = 0; n < 4; n++) {
-        fputc((int)(x & 0xff), file);
-        x >>= 8;
-    }
-}
-
-/* ===========================================================================
-   Reads a long in LSB order from the given gz_stream. Sets z_err in case
-   of error.
-*/
-local uLong getLong (s)
-    gz_stream *s;
-{
-    uLong x = (uLong)get_byte(s);
-    int c;
-
-    x += ((uLong)get_byte(s))<<8;
-    x += ((uLong)get_byte(s))<<16;
-    c = get_byte(s);
-    if (c == EOF) s->z_err = Z_DATA_ERROR;
-    x += ((uLong)c)<<24;
-    return x;
-}
-
-/* ===========================================================================
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression state.
-*/
-int ZEXPORT gzclose (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL) return Z_STREAM_ERROR;
-
-    if (s->mode == 'w') {
-#ifdef NO_GZCOMPRESS
-        return Z_STREAM_ERROR;
-#else
-        if (do_flush (file, Z_FINISH) != Z_OK)
-            return destroy((gz_stream*)file);
-
-        putLong (s->file, s->crc);
-        putLong (s->file, (uLong)(s->in & 0xffffffff));
-#endif
-    }
-    return destroy((gz_stream*)file);
-}
-
-#if defined(STDC) && !defined(_WIN32_WCE)
-#  define zstrerror(errnum) strerror(errnum)
-#else
-#  define zstrerror(errnum) ""
-#endif
-
-/* ===========================================================================
-     Returns the error message for the last error which occurred on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occurred in the file system and not in the compression library,
-   errnum is set to Z_ERRNO and the application may consult errno
-   to get the exact error code.
-*/
-const char * ZEXPORT gzerror (file, errnum)
-    gzFile file;
-    int *errnum;
-{
-    char *m;
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL) {
-        *errnum = Z_STREAM_ERROR;
-        return (const char*)ERR_MSG(Z_STREAM_ERROR);
-    }
-    *errnum = s->z_err;
-    if (*errnum == Z_OK) return (const char*)"";
-
-    m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
-
-    if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
-
-    TRYFREE(s->msg);
-    s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
-    if (s->msg == Z_NULL) return (const char*)ERR_MSG(Z_MEM_ERROR);
-    strcpy(s->msg, s->path);
-    strcat(s->msg, ": ");
-    strcat(s->msg, m);
-    return (const char*)s->msg;
-}
-
-/* ===========================================================================
-     Clear the error and end-of-file flags, and do the same for the real file.
-*/
-void ZEXPORT gzclearerr (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL) return;
-    if (s->z_err != Z_STREAM_END) s->z_err = Z_OK;
-    s->z_eof = 0;
-    clearerr(s->file);
-}
diff --git a/infback.c b/infback.c
index e279d8f58..af3a8c965 100644
--- a/infback.c
+++ b/infback.c
@@ -1,5 +1,5 @@
 /* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2008 Mark Adler
+ * Copyright (C) 1995-2009 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -55,7 +55,7 @@ int stream_size;
     state->wbits = windowBits;
     state->wsize = 1U << windowBits;
     state->window = window;
-    state->write = 0;
+    state->wnext = 0;
     state->whave = 0;
     return Z_OK;
 }
diff --git a/inffast.c b/inffast.c
index 4010ec00d..0a0761f3d 100644
--- a/inffast.c
+++ b/inffast.c
@@ -79,7 +79,7 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
 #endif
     unsigned wsize;             /* window size or zero if not using window */
     unsigned whave;             /* valid bytes in the window */
-    unsigned z_write;           /* window write index */
+    unsigned wnext;             /* window write index */
     unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
     unsigned long hold;         /* local strm->hold */
     unsigned bits;              /* local strm->bits */
@@ -106,7 +106,7 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
 #endif
     wsize = state->wsize;
     whave = state->whave;
-    z_write = state->write;
+    wnext = state->wnext;
     window = state->window;
     hold = state->hold;
     bits = state->bits;
@@ -214,7 +214,7 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
 #endif
                     }
                     from = window - OFF;
-                    if (z_write == 0) {           /* very common case */
+                    if (wnext == 0) {           /* very common case */
                         from += wsize - op;
                         if (op < len) {         /* some from window */
                             len -= op;
@@ -224,17 +224,17 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
                             from = out - dist;  /* rest from output */
                         }
                     }
-                    else if (z_write < op) {      /* wrap around window */
-                        from += wsize + z_write - op;
-                        op -= z_write;
+                    else if (wnext < op) {      /* wrap around window */
+                        from += wsize + wnext - op;
+                        op -= wnext;
                         if (op < len) {         /* some from end of window */
                             len -= op;
                             do {
                                 PUP(out) = PUP(from);
                             } while (--op);
                             from = window - OFF;
-                            if (z_write < len) {  /* some from start of window */
-                                op = z_write;
+                            if (wnext < len) {  /* some from start of window */
+                                op = wnext;
                                 len -= op;
                                 do {
                                     PUP(out) = PUP(from);
@@ -244,7 +244,7 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
                         }
                     }
                     else {                      /* contiguous in window */
-                        from += z_write - op;
+                        from += wnext - op;
                         if (op < len) {         /* some from window */
                             len -= op;
                             do {
@@ -327,7 +327,7 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
    inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
    - Using bit fields for code structure
    - Different op definition to avoid & for extra bits (do & for table bits)
-   - Three separate decoding do-loops for direct, window, and write == 0
+   - Three separate decoding do-loops for direct, window, and wnext == 0
    - Special case for distance > 1 copies to do overlapped load and store copy
    - Explicit branch predictions (based on measured branch probabilities)
    - Deferring match copy and interspersed it with decoding subsequent codes
diff --git a/inflate.c b/inflate.c
index d069bbe46..e7f3cdddf 100644
--- a/inflate.c
+++ b/inflate.c
@@ -45,7 +45,7 @@
  * - Rearrange window copies in inflate_fast() for speed and simplification
  * - Unroll last copy for window match in inflate_fast()
  * - Use local copies of window variables in inflate_fast() for speed
- * - Pull out common write == 0 case for speed in inflate_fast()
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
  * - Make op and len in inflate_fast() unsigned for consistency
  * - Add FAR to lcode and dcode declarations in inflate_fast()
  * - Simplified bad distance check in inflate_fast()
@@ -117,7 +117,7 @@ z_streamp strm;
     state->head = Z_NULL;
     state->wsize = 0;
     state->whave = 0;
-    state->write = 0;
+    state->wnext = 0;
     state->hold = 0;
     state->bits = 0;
     state->lencode = state->distcode = state->next = state->codes;
@@ -152,7 +152,7 @@ int windowBits;
     }
 
     /* set number of window bits, free window if different */
-    if (windowBits < 8 || windowBits > 15)
+    if (windowBits && (windowBits < 8 || windowBits > 15))
         return Z_STREAM_ERROR;
     if (state->wbits != windowBits && state->window != Z_NULL) {
         ZFREE(strm, state->window);
@@ -375,7 +375,7 @@ unsigned out;
     /* if window not in use yet, initialize */
     if (state->wsize == 0) {
         state->wsize = 1U << state->wbits;
-        state->write = 0;
+        state->wnext = 0;
         state->whave = 0;
     }
 
@@ -383,22 +383,22 @@ unsigned out;
     copy = out - strm->avail_out;
     if (copy >= state->wsize) {
         zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
-        state->write = 0;
+        state->wnext = 0;
         state->whave = state->wsize;
     }
     else {
-        dist = state->wsize - state->write;
+        dist = state->wsize - state->wnext;
         if (dist > copy) dist = copy;
-        zmemcpy(state->window + state->write, strm->next_out - copy, dist);
+        zmemcpy(state->window + state->wnext, strm->next_out - copy, dist);
         copy -= dist;
         if (copy) {
             zmemcpy(state->window, strm->next_out - copy, copy);
-            state->write = copy;
+            state->wnext = copy;
             state->whave = state->wsize;
         }
         else {
-            state->write += dist;
-            if (state->write == state->wsize) state->write = 0;
+            state->wnext += dist;
+            if (state->wnext == state->wsize) state->wnext = 0;
             if (state->whave < state->wsize) state->whave += dist;
         }
     }
@@ -654,7 +654,9 @@ int flush;
             }
             DROPBITS(4);
             len = BITS(4) + 8;
-            if (len > state->wbits) {
+            if (state->wbits == 0)
+                state->wbits = len;
+            else if (len > state->wbits) {
                 strm->msg = (char *)"invalid window size";
                 state->mode = BAD;
                 break;
@@ -1128,15 +1130,12 @@ int flush;
                     break;
 #endif
                 }
-                if (copy > state->write) {
-                    copy -= state->write;
-                    /* %% problem here if copy > state->wsize -- avoid? */
-                    /* %% or can (state->window + state->wsize) - copy */
-                    /* %% but really should detect and reject this case */
+                if (copy > state->wnext) {
+                    copy -= state->wnext;
                     from = state->window + (state->wsize - copy);
                 }
                 else
-                    from = state->window + (state->write - copy);
+                    from = state->window + (state->wnext - copy);
                 if (copy > state->length) copy = state->length;
             }
             else {                              /* copy from output */
diff --git a/inflate.h b/inflate.h
index ba03e7c48..95f4986d4 100644
--- a/inflate.h
+++ b/inflate.h
@@ -92,7 +92,7 @@ struct inflate_state {
     unsigned wbits;             /* log base 2 of requested window size */
     unsigned wsize;             /* window size or zero if not using window */
     unsigned whave;             /* valid bytes in the window */
-    unsigned write;             /* window write index */
+    unsigned wnext;             /* window write index */
     unsigned char FAR *window;  /* allocated sliding window, if needed */
         /* bit accumulator */
     unsigned long hold;         /* input bit accumulator */
diff --git a/inftrees.c b/inftrees.c
index 2b12d7089..21f4dfb41 100644
--- a/inftrees.c
+++ b/inftrees.c
@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2009 Mark Adler
+ * Copyright (C) 1995-2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.3.4 Copyright 1995-2008 Mark Adler ";
+   " inflate 1.2.3.5 Copyright 1995-2010 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 200};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 69, 199};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
diff --git a/pngcrush.c b/pngcrush.c
index b512be6b1..aa247b150 100644
--- a/pngcrush.c
+++ b/pngcrush.c
@@ -160,6 +160,8 @@
 
 Change log:
 
+Version 1.7.8  (built with libpng-1.4.0 and zlib-1.2.3.5)
+
 Version 1.7.7  (built with libpng-1.4.0 and zlib-1.2.3.4)
   Updated bundled libpng to version 1.4.0.
   Check the "-plte_len n" option for out-of-range value of n.
diff --git a/zconf.h b/zconf.h
index e8d955317..5a2d1efad 100644
--- a/zconf.h
+++ b/zconf.h
@@ -45,8 +45,11 @@
 #  define deflateTune           z_deflateTune
 #  define deflate_copyright     z_deflate_copyright
 #  define get_crc_table         z_get_crc_table
+#  define gzbuffer              z_gzbuffer
 #  define gzclearerr            z_gzclearerr
 #  define gzclose               z_gzclose
+#  define gzclose_r             z_gzclose_r
+#  define gzclose_w             z_gzclose_w
 #  define gzdirect              z_gzdirect
 #  define gzdopen               z_gzdopen
 #  define gzeof                 z_gzeof
@@ -54,6 +57,7 @@
 #  define gzflush               z_gzflush
 #  define gzgetc                z_gzgetc
 #  define gzgets                z_gzgets
+#  define gzoffset              z_gzoffset
 #  define gzopen                z_gzopen
 #  define gzprintf              z_gzprintf
 #  define gzputc                z_gzputc
@@ -74,8 +78,10 @@
 #  define inflateGetHeader      z_inflateGetHeader
 #  define inflateInit2_         z_inflateInit2_
 #  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
 #  define inflatePrime          z_inflatePrime
 #  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
 #  define inflateSetDictionary  z_inflateSetDictionary
 #  define inflateSync           z_inflateSync
 #  define inflateSyncPoint      z_inflateSyncPoint
diff --git a/zlib.h b/zlib.h
index 4d13ca18d..11d690254 100644
--- a/zlib.h
+++ b/zlib.h
@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.3.4, December 21st, 2009
+  version 1.2.3.5, Jan 8th, 2010
 
-  Copyright (C) 1995-2009 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -37,8 +37,8 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.3.4"
-#define ZLIB_VERNUM 0x1234
+#define ZLIB_VERSION "1.2.3.5"
+#define ZLIB_VERNUM 0x1235
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
 #define ZLIB_VER_REVISION 3
@@ -744,6 +744,9 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
    size is given as input, inflate() will return with the error code
    Z_DATA_ERROR instead of trying to allocate a larger window.
 
+     windowBits can also be zero to request that inflate use the window size in
+   the zlib header of the compressed stream.
+
      windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
    determines the window size. inflate() will then process raw deflate data,
    not looking for a zlib or gzip header, not generating a check value, and not
@@ -1148,11 +1151,18 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
    buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
 */
 
+/*
+     This library supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio using the functions that start
+  with "gz". The gzip format is different from the zlib format. gzip is a
+  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+*/
 
 typedef voidp gzFile;
 
 /*
-ZEXTERN gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
 
      Opens a gzip (.gz) file for reading or writing. The mode parameter
    is as in fopen ("rb" or "wb") but can also include a compression level
@@ -1169,7 +1179,7 @@ ZEXTERN gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
    can be checked to distinguish the two cases (if errno is zero, the
    zlib error is Z_MEM_ERROR).  */
 
-ZEXTERN gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
 /*
      gzdopen() associates a gzFile with the file descriptor fd.  File
    descriptors are obtained from calls like open, dup, creat, pipe or
@@ -1182,6 +1192,20 @@ ZEXTERN gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
    the (de)compression state.
 */
 
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+     Set the internal buffer size used by this library's functions. The default
+   buffer size is 8192 bytes. This function must be called after gz_open() or
+   gz_dopen(), and before any other calls that read or write the file. The
+   buffer memory allocation is always deferred to the first read or write. Two
+   buffers are allocated, either both of the specified size when writing, or
+   one of the specified size and the other twice that size when reading. A
+   larger buffer size of, for example, 64K or 128K bytes will noticeably
+   increase the speed of decompression (reading).
+     gz_buffer() returns 0 on success, or -1 on failure, such as being called
+   too late.
+*/
+
 ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
 /*
      Dynamically update the compression level or strategy. See the description
@@ -1190,7 +1214,7 @@ ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
    opened for writing.
 */
 
-ZEXTERN int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
 /*
      Reads the given number of uncompressed bytes from the compressed file.
    If the input file was not in gzip format, gzread copies the given number
@@ -1198,25 +1222,26 @@ ZEXTERN int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
      gzread returns the number of uncompressed bytes actually read (0 for
    end of file, -1 for error). */
 
-ZEXTERN int ZEXPORT    gzwrite OF((gzFile file,
-                                   voidpc buf, unsigned len));
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+                                voidpc buf, unsigned len));
 /*
      Writes the given number of uncompressed bytes into the compressed file.
    gzwrite returns the number of uncompressed bytes actually written
    (0 in case of error).
 */
 
-ZEXTERN int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
+ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
 /*
-     Converts, formats, and writes the args to the compressed file under
+     Converts, formats, and writes the arguments to the compressed file under
    control of the format string, as in fprintf. gzprintf returns the number of
-   uncompressed bytes actually written (0 in case of error).  The number of
-   uncompressed bytes written is limited to 4095. The caller should assure that
-   this limit is not exceeded. If it is exceeded, then gzprintf() will return
-   return an error (0) with nothing written. In this case, there may also be a
-   buffer overflow with unpredictable consequences, which is possible only if
-   zlib was compiled with the insecure functions sprintf() or vsprintf()
-   because the secure snprintf() or vsnprintf() functions were not available.
+   uncompressed bytes actually written, or 0 in case of error. The number of
+   uncompressed bytes written is limited to 8191, or one less than the buffer
+   size given to gz_buffer(). The caller should assure that this limit is not
+   exceeded. If it is exceeded, then gzprintf() will return an error (0) with
+   nothing written. In this case, there may also be a buffer overflow with
+   unpredictable consequences, which is possible only if zlib was compiled
+   with the insecure functions sprintf() or vsprintf() because the secure
+   snprintf() or vsnprintf() functions were not available.
 */
 
 ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
@@ -1257,7 +1282,7 @@ ZEXTERN int ZEXPORT    gzungetc OF((int c, gzFile file));
    or gzrewind().
 */
 
-ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
 /*
      Flushes all pending output into the compressed file. The parameter
    flush is as in the deflate() function. The return value is the zlib
@@ -1268,8 +1293,8 @@ ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
 */
 
 /*
-ZEXTERN z_off_t ZEXPORT    gzseek OF((gzFile file,
-                                      z_off_t offset, int whence));
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+                                   z_off_t offset, int whence));
 
       Sets the starting position for the next gzread or gzwrite on the
    given compressed file. The offset represents a number of bytes in the
@@ -1298,11 +1323,23 @@ ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
 
      Returns the starting position for the next gzread or gzwrite on the
    given compressed file. This position represents a number of bytes in the
-   uncompressed data stream.
+   uncompressed data stream, and is zero when starting, even if appending
+   or reading a gzip stream from the middle of a file using gz_dopen().
 
    gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
 */
 
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+     Returns the current offset in the file being read or written. This offset
+   includes the count of bytes that precede the gzip stream, for example when
+   appending or when using gz_dopen() for reading. When reading, the offset
+   includes data that has been used to generate what has been provided as
+   uncompressed data so far, but does not include as yet unused buffered input.
+   On error, gz_offset() returns -1.
+*/
+
 ZEXTERN int ZEXPORT gzeof OF((gzFile file));
 /*
      Returns 1 when EOF has previously been detected reading the given
@@ -1319,10 +1356,22 @@ ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
 /*
      Flushes all pending output if necessary, closes the compressed file
    and deallocates all the (de)compression state. The return value is the zlib
-   error number.  Note that once file is close, you cannot call gzerror with
+   error number.  Note that once file is closed, you cannot call gzerror with
    file, since its structures have been deallocated.
 */
 
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+    Same as gz_close(), but gz_close_r() is only for use when reading, and
+   gz_close_w() is only for use when writing. The advantage to using these
+   instead of gz_close() is that they avoid linking in zlib compression or
+   decompression code that is not used when only reading or only writing
+   respectively. If gz_close() is used, then both compression and
+   decompression code will be included the application when linking to a
+   static zlib library.
+*/
+
 ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
 /*
      Returns the error message for the last error which occurred on the
@@ -1439,6 +1488,7 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
    ZEXTERN off64_t ZEXPORT gzseek64 OF((gzFile, off64_t, int));
    ZEXTERN off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN off64_t ZEXPORT gzoffset64 OF((gzFile));
    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off64_t));
    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off64_t));
 #endif
@@ -1447,12 +1497,14 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
 #  define gzopen gzopen64
 #  define gzseek gzseek64
 #  define gztell gztell64
+#  define gzoffset gzoffset64
 #  define adler32_combine adler32_combine64
 #  define crc32_combine crc32_combine64
 #  ifndef _LARGEFILE64_SOURCE
      ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
      ZEXTERN off_t ZEXPORT gzseek64 OF((gzFile, off_t, int));
      ZEXTERN off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN off_t ZEXPORT gzoffset64 OF((gzFile));
      ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off_t));
      ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off_t));
 #  endif
@@ -1460,6 +1512,7 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
    ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
    ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
    ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
    ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
    ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
 #endif
diff --git a/zlibdefs.h b/zlibdefs.h
index 80d6e8171..e69de29bb 100644
--- a/zlibdefs.h
+++ b/zlibdefs.h
@@ -1,13 +0,0 @@
-/* zlibdefs.h -- compile-time definitions for the zlib compression library
- * Copyright (C) 1995-2006 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include <sys/types.h>	/* for off_t */
-#include <unistd.h>	/* for SEEK_* and off_t */
-#ifdef VMS
-#  include <unixio.h>	/* for off_t */
-#endif
-#ifndef z_off_t
-#  define z_off_t off_t
-#endif
diff --git a/zutil.h b/zutil.h
index bccc58151..18a13cf1f 100644
--- a/zutil.h
+++ b/zutil.h
@@ -1,5 +1,5 @@
 /* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2006 Jean-loup Gailly.
+ * Copyright (C) 1995-2010 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -17,24 +17,24 @@
 #include "zlib.h"
 
 #ifdef STDC
-#  ifndef _WIN32_WCE
+#  if !(defined(_WIN32_WCE) && defined(_MSV_VER))
 #    include <stddef.h>
 #  endif
 #  include <string.h>
 #  include <stdlib.h>
 #endif
-#if defined(NO_ERRNO_H) || defined(_WIN32_WCE)
-#   ifdef _WIN32_WCE
-      /* The Microsoft C Run-Time Library for Windows CE doesn't have
-       * errno.  We define it as a global variable to simplify porting.
-       * Its value is always 0 and should not be used.  We rename it to
-       * avoid conflict with other libraries that use the same workaround.
-       */
-#     define errno z_errno
-#   endif
-    extern int errno;
+
+#if defined(UNDER_CE) && defined(NO_ERRNO_H)
+#  define zseterrno(ERR) SetLastError((DWORD)(ERR))
+#  define zerrno() ((int)GetLastError())
 #else
-#   include <errno.h>
+#  ifdef NO_ERRNO_H
+     extern int errno;
+#  else
+#    include <errno.h>
+#  endif
+#  define zseterrno(ERR) do { errno = (ERR); } while (0)
+#  define zerrno() errno
 #endif
 
 #ifndef local
@@ -87,7 +87,7 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
 #  define OS_CODE  0x00
 #  if defined(__TURBOC__) || defined(__BORLANDC__)
-#    if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+#    if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
        /* Allow compilation with ANSI keywords only enabled */
        void _Cdecl farfree( void *block );
        void *_Cdecl farmalloc( unsigned long nbytes );
@@ -213,7 +213,9 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #  ifdef WIN32
      /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
 #    if !defined(vsnprintf) && !defined(NO_vsnprintf)
-#      define vsnprintf _vsnprintf
+#      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+#         define vsnprintf _vsnprintf
+#      endif
 #    endif
 #  endif
 #  ifdef __SASC