path: root/NEWS

libgphoto2 2.5.23.1 development

lumix:

* New WIFI Lumix camera driver, using curl and libxml2.

  Lots of abilities supported already, just capture is not working :/
  Needs libxml2 and libcurl to be built.

ptp2:
* Canon EOS: lock/unlock ui before more operations
* Canon Powershot SX / EOS M: some setup adjustments to make powershot sx work better
* Nikon Keymission 170: try override opcodes to allow capture
* Nikon DSLR: fixed a regression where 5 seconds was longer image capture shutterspeed
* bugfixes
* New ids added:
  * Sony Alpha RX100V, A7s, RX0 II,
  * Nikon Coolpix L810, KeyMission 170
  * Canon PowerShot SX530HS, SX 620HS, 
  * Canon EOS 2000D, 1500D, R2, M6 Mark 2, 250D,
  * Fuji X-A5, X-E3, GFX100
  * GoPro Hero 7 White, 7 Black, 8 Black

all:

* fixed some fuzzer issues, mostly in "outdated" drivers.

------------------------------------------------------------------------------
libgphoto2 2.5.23 release

ptp2:
* Sony capture stability and speed improvements
* Canon EOS capture stability improvements, reduce partial read blobs from 5MB to 1MB
* Canon EOS M image format unpacking adjustments
* Olympus OMD: bulb capture added, trigger capture capable
* Panasonic GH5: added manualfocusdrive, capturetarget
* Canon PowerShot X work ... trying to support / improve stability of capture
* PTP string packing adjusted to standard (empty and null strings)
* New ids added:
  * Sony Alpha A68, RX100M6, DSC-WX350
  * Nikon Coolpix L100
  * Canon PowerShot G7X, G9X Mark II
  * Canon Rebel T6, EOS 2000D
  * Fuji X-A2, GFX 50R, XT-30
  * Ricoh WG-M2
* libmtp ids synced.

pentax:
* synced smaller parts with pktriggercord

translations:
* updated danish

fuzzing:
* vusb and sample-afl now able to fuzz all USB cameras (even if slow)

all:
* Various crashes fixed that were found during AFL fuzzing the USB drivers

* The camlibs for cameras (and driver) older than 15 years have been
  default disabled for installation, to speed up libgphoto2 startup
  and also reduce attack surface against malicious USB devices.

  See OUTDATED.txt in git for notes.

  You can reenable them using:

	./configure --with-camlibs=all,outdated

  or by the camlib driver name (sample: jd11):

	./configure --with-camlibs=all,jd11

  To get the lists of all camera libraries use:

	./configure --help

  If you still have an old camera using one of these camlibs in active
  use, please report this to the devteam so we can reenable it per
  default.

------------------------------------------------------------------------------
libgphoto2 2.5.22 release

ptp2:
* Canon EOS M / PowerShot capture problem solved
* Sony shutterspeed - provide a static list as the camera does not provide one, you can set also different values
* Canon SDRAM capture, try to support more than 500MB of images at once
* New USB Ids added:
  * Canon EOS R, 800D
  * Canon PowerShot SX600HS, SX740HS
  * Sony DSC RX0, RX100-M5A
  * Nikon DSC D3500

generic:
* handle new "bind" udev event in udev rule generator.

translations:
* updated polish, ukrainian

------------------------------------------------------------------------------
libgphoto2 2.5.21 release

ptp2:
* Nikon Z series support added
* New Canon Powershot SX / GX also support capture, ALPHA support added
* Canon EOS bugfixes
* imported IDs from libmtp
* Added:
  * Nikon Z6, Z7
  * Canon Powershot SX720HS, G5X
  * Canon IXUS 185

------------------------------------------------------------------------------
libgphoto2 2.5.20 release

ptp2:
* Canon EOS: fixed regression for some EOS series in OLC decoding
* Apple iPhone: disabled PTP Manifest reading again, as IOS seems not to follow the standard
* bugfixes
* new IDs added:
  * Sony Alpha-RX10M4
  * Canon EOS M50, 4000D
  * Fuji XT-3
  * synced new MTP ids from libmtp

pentax:
* refreshed from pktriggercord

translations:
* updated polish, ukrainian, swedish, danish
------------------------------------------------------------------------------
libgphoto2 2.5.19 release

ptp2:
* Canon EOS: handle OLC versions of newer models, which gave incorrect aperture/shutterspeed values
* Fuji X series capture improvements.
* Fuji X series live view support added.
* Panasonic GH5 liveview and capture support. (Needs camera firmware 2.3 or newer)
* Olympus E-M5 Mark II and E-M1 Mark II liveview and capture support added.
* USB IDs added:
  * Sony Alpha A99 M2, A7 III, A9
  * Nikon Coolpix A900
  * Panasonic GH5
  * Olympus E-M1 Mark 2
  * Fuji X-H1, X-M1, X70, X30

all:
* various fixes for warnings from compilers and the coverity scanner

------------------------------------------------------------------------------
libgphoto2 2.5.18 release

ptp2:
* Canon EOS: Fixed file download on several EOS brands, broken by 2.5.17 release.

pentax:
* Added K01 and K70 models.

------------------------------------------------------------------------------
libgphoto2 2.5.17 release

ptp2:
* Apple iOSX: handle root directory objects that have ParentObject==StorageID instead of 0
* implement PTP 1.1 Manifest reading and hook into filesystem. currently only supported
  by Apple iOS.
* Canon PowerShot CHDK live view support.
* Canon EOS: prepare capture needs to wait a bit on a crucial place to get all events.
  might fix some PTP Device Busy reports.
* Canon EOS: split bulk downloads into pieces of partial downloads. This might cure the Error 70.
* Canon EOS: Improved EOS M capture
* Canon CHDK: live preview capture support added
* Added USB IDs:
  * Sony A7r III
  * Nikon CoolPix L430
  * Nikon D850
  * Canon EOS M2, M6, M100
  * Canon EOS 6D Mark II
  * Fuji Film X-Pro 2

pentax:
* Code updates imported from pkremote

libgphoto2:
* Report file changes via GP_EVENT_FILE_CHANGED (hooked up for Canon EOS currently)

translations:
* updates spanish, chinese

------------------------------------------------------------------------------
libgphoto2 2.5.16 release

ptp2:
* A hardening fix broke the string unpacking for 0 length strings which broke Canon EOS

------------------------------------------------------------------------------
libgphoto2 2.5.15 release

ptp2:
* fuji: Fix cameras without new capture properties.
* Canon EOS: config aspectratio, highisonr
* Canon EOS: emit CAPTURECOMPLETE event
* Canon EOS: whitebalanaceadjustment is 32bit signed, not 16bit signed
* usb: better error feedback
* fixed some bugs found by AFL fuzzing
* Added USB ids:
  * Sony: A6500, HX400V
  * Nikon: D500, D7500
  * Olympus: VR360
  * Canon PowerShot: ELPH 350 HS
  * Canon EOS: 200D, Rebel T7i
  * Fuji: GFX 50 S
  * Ricoh Theta S, Theta SC

libgphoto2_port/vusb:
* now default disabled as it confused people, enable with --enable-vusb

------------------------------------------------------------------------------
libgphoto2 2.5.14 release

ptp2:
* Canon EOS M remote control / capture support (M3, M5, M10 ... but not the original EOS M currently)
* fix for Canon EOS camera crash bug introduced in 2.5.13.
* Fuji XT-2 capture support (firmware update needed, might work for other Fuji XT too)
* Canon EOS 77D added.
* various bugfixes
* added USB IDs:
  * Sony DSC-RX10M3, DSC-HX90V
  * Sony UMC-R10C
  * Nikon D5600,
  * Canon EOS 77D
  * Fuji XT-20
* synced MTP device ids from libmtp
* more issues fixed that were found by the AFL fuzzer

pentax:
* Added Pentax K5-II, Pentax K3-II

libgphoto2_port:
* fixed gp_log_remove_func

libgphoto2_port/vusb:
* support f-number, shutterspeed, and exposurebias in the virtual PTP camera

all:
* several issues found by gcc 7 fixed

translations:
* updated ukrainian, polish, vietnamese, french, swedish
------------------------------------------------------------------------------
libgphoto2 2.5.13 release

pentax:
* Now using the pktriggercord codebase
* lots of improvements
* Please report missing Pentax K USB ids that are supported by pktriggercord!

ptp2:
* iPhone iOS 10.2 and later storage handling fixed, added dynamic storage handling
* Sony Alpha Live View support.
* Canon EOS M series capture enabled. (not fully working yet)
* Various crashes and endless loops fixed that were found by the AFL fuzzer.
* Various bugfixes in Nikon, Canon capture
* New USB Ids:
  * Sony: SLT A37, DSC-RX100M5
  * Nikon KeyMission 360
  * Canon PowerShot G16
  * Canon EOS M5, EOS M10
  * Fuji Fujifilm XT-2
  * GoPro Hero 5 Black

------------------------------------------------------------------------------
libgphoto2 2.5.12 release

ptp2:
* Canon EOS: more fixes for Canon EOS 5D Mark IV and Canon EOS 80D.
* Parrot Sequoia support and property decoding
* Nikon 1: Fixed Nikon 1 capture
* Sony Alpha: various bugfixes.
* New USB IDs:
  * Nikon Coolpix AW130
  * Nikon DSC D3400
  * Parrot Sequoia
  * GoPro Hero, Hero4 Silver, Hero + 
* bugfixes and cleanups

canon:
* fixed zoom on some older Canon Powershots

translations:
* updated polish, ukrainian, vietnamese, danish, french, svensk
------------------------------------------------------------------------------
libgphoto2 2.5.11 release

canon:
* not experimental anymore, for some years
* some bugfixes in configuration handling

ptp2:
* canon: EOS capture improvements, also supporting new EOS
* sony: tethering and trigger capture implemented, capture stability improvements
* sony: exposure compensation setting fixed
* sony: capture and autofocus configurations, similar to eosremoterelease
* generic: fixed serialnumber retrieval
* nikon: "autofocus" config variable for global autofocus enable/disable (default on, default liveview off)
* various bugs fixed, stability improved
* ptpip: allow different event ports. --port ptpip:IP:dataport:eventport
* New ids reported:
  - Sony Alpha 7, DSC-RX100M4, NEX-7, DSC-HX20V, Alpha 6300, A7S II, A7, 
  - Nikon DSC Df, D7200, D5, D810A, 1 V3
  - Canon EOS 1Dx Mark 3, 80D, 5D Mark IV
  - Canon Digital IXUS 180
  - various music players / android phones imported from libmtp 

libgphoto2:
* Speed up initial startup.
* Win32: store settings in the "User Profile\.gphoto\settings" and not in C:\\Windows anymore.
* gp_widget_changed() no longer clears the "changed" state to make this API more consistent.
  Use gp_widget_set_changed(widget,FALSE) to do so.

examples:
* sample-photobooth: a sample program handling tethering, SIGUSR1 driven capture and SIGUSR2
  based configuration reading.
* sample-afl: code to inject afl fuzzing data

translations:
* updated swedish, ukrainian, polish, finnish, russian, danish, polish, brazilian, serbian, dutch, chinese
------------------------------------------------------------------------------
libgphoto2 2.5.10 release

libgphoto2:
* added gp_camera_list_config, gp_camera_get_single_config, gp_camera_set_single_config
  additional configuration APIs for faster access to single configuration values.

ptp2:
* allow generic opcode commands with parameters, config variable "opcode"
* fixed pretending that Nikon Coolpix S series is a Nikon 1 S.
* Nikon: fixed problem with SDRAM capture
* Canon EOS: handle "no focus" during capture
* Canon EOS: handle --new correctly
* Canon Powershot: handle lack of object protection setting
* Ricoh Theta: support shutterspeed configuration
* added size checking to PTP unpacking primitives
* various bugfixes
* New ids:
  * Imported Media Players and Android phones from libmtp
  * Sony Alpha A7S II, ILCE 7M2
  * Kodak Z990
  * Nikon Coolpix L840, S3600
  * Leica SL
  * Olympus TG-620, E-M5 Mark 2
  * Canon EOS 1D C, 750D
  * Canon IXUS 160
  * Fuji Film X-T1, X-T10, A-610


pentax:
* fixed some crashes on non-existing config variables
* use portable directory api (helps Visual Studio)

libgphoto2_port/vusb:
* Implemented a virtual PTP camera for test purposes.

libgphoto2_port/disk:
* Support exfat fuse filesystems.

all:
* fixed various issues found by Coverity static analyzer
* removed unistd.h headers where not needed to help Visual Studio

translations:
* updated swedish, brazilian portuguese, danish, polish, ukrainian, vietnamese

------------------------------------------------------------------------------
libgphoto2 2.5.9 release

Now maintained (source and issue tracker) in GIT at https://github.com/gphoto/libgphoto2 

ptp2:
* PTP/IP: fixes to support Ricoh Theta and Sony Alpha over WLAN better
* unification of timeout with backoff handling
* Canon EOS: fixed a timeout bug on wait_event
* Canon EOS: report protection status correctly
* Canon EOS: unlock the ui on close
* Sony: bulb mode support (in manual mode, shutterspeed and bulb option)
* Hook up PTP OpenCapture opcode
* Nikon J5 support. Nikon now hides prop and opcodes even differently.
* Added USB IDs:
  - Sony SLT A77V, A7R2, HDR-PJ260VE
  - Nikon DSLR D5500
  - Canon EOS 760D, 5Ds, 5Ds R
  - Nikon Coolpix AW110, S6300, S6800, S3700, S2900
  - Nikon 1 S2, J5
  - Ricoh Theta m15 (USB and WLAN)
  - GoProp Hero 4

canon:
* readd old Canon IXUS 30.

translations:
* updated ukrainian, vietnamese, polish, italian

------------------------------------------------------------------------------
libgphoto2 2.5.8 release

all:
* Missing COPYRIGHT headers added.
* Bug fixes for issues detected by Coverity.

ptp2:
* Canon Powershot/IXUS CHDK support
  Install the CHDK firmware and then use "gphoto2 --set-config chdk=On" to enable.
* Canon EOS: Implemented new capture method for new Canon EOS to avoid hangs.
* Canon EOS: New configuration variable: continuousaf
* Canon EOS: event output for focusinfo / focusmask
* Nikon DSLR: New configuration variables: movieiso, movieshutterspeed, moviehighisonr
* Nikon Coolpix A: also manually add override opcodes for capture (please report if it works)
* New USB ids:
  Sony: DSC-HX60V, Alpha-A7S, Alpha-A77 M2, Alpha A5100
  Panasonic: DMC-LS2
  Canon EOS 7D Mark II, Canon EOS M3
  Canon Powershot SX520 HS
  Fuji Fujifilm X-E2
  Samsung NX1
* Media Player IDs synced with the libmtp ID database.
* Lots of bugfixes.

libgphoto2_port/libusb1:
* Prefer libusb1 over libusb0 if both are present.
* Asynchronous interrupt handling, to avoid losing usb interrupts during other
  operations.

------------------------------------------------------------------------------
libgphoto2 2.5.7 release

ptp2:
* Canon EOS focusinfo crash fixed (affected all config operations)
* wait_for_event sleep backoff increased (50 - 100 - 150 - 200ms)
* Nikon: fixes to make Nikon Coolpix S9700 over PTPIP work better
* Nikon: WLAN GUID setting
* Sony: tighten event loop to avoid loss of objectadded events
* New USB ids: Nikon Coolpix 9400, Nikon S9700, Pentax K3 (in PTP).

pentax:
* added Pentax K100Ds
* added raw capture support

packaging:
* fixed missing libexif in pkgconfig 

translations:
* updated ukrainian, vietnamese, french, polish
------------------------------------------------------------------------------
libgphoto2 2.5.6 release

ptp2:
* Nikon D3000/D3100/D3200: It hides the "good" capture opcodes from the
  DeviceInfo. Override and add them. If you see capture bugs, please report
  with debuglogfile.
* "exposurecompensation" now in correct size (-3.0 <-> 3.0 usually)
* Canon EOS: decode and report "focusinfo" variable that outputs the focus information of the camera.
* Canon EOS: autofocusdrive=0 and cancelautofocus=1 added to cancel autofocusing,
  to avoid blocking the camera.
* Canon EOS: "eosviewfinder" renamed to "viewfinder"
* Sony SLT: Make property setting work for "iso", "exposurecompensation",
  "f-number", "shutterspeed"
* Canon EOS: crash on 700D fixed
* Nikon DSLR: race condition on object addition handled better
* Nikon DSLR: make sure we make a pause a bit during polling after capture.
* IDs added:
  Nikon: Coolpix P7800, S1, J4
  Nikon: D3300, D610, D4s, D810, D750
  Canon: IXUS 125HS, PowerShot Elph340HS
  Leica M9
* various bugfixes

libgphoto2_port/usb1:
* fixed a memory leak
* api changed for gp_log_data to make smaller debuglogs possible

------------------------------------------------------------------------------
libgphoto2 2.5.5.1 release

This is a regression fix release.

ptp2:
* fixed all Nikon S* coolpix that are not Nikon 1
* Nikon: exit from potential endless loop on trigger capture

canon:
* On EOS/Rebel DSLR do not query or set "zoom" as its manual always

translations:
* updated polish, ukrainian, vietnamese

------------------------------------------------------------------------------
libgphoto2 2.5.5 release

ptp2:
* Nikon 1 support. Final fix to get it running by Raj Kumar of archive.org.
* Nikon: liveview capture without autofocus enhanced, now also for card
* Nikon: restart liveview after capture
* Canon EOS: New property reporting method (OLC Info) implemented.
* Print read-only values in configuration table lookup (for Canon EOS mostly)
* Sony: Fixed Sony SLT-A900v capture
* Fixed the various "datetime" hooks for PTP generic, Canon Powershot and Canon EOS
  to hopefully work better. --set-config datetime=now sets the camera to the current time.
* CHDK: some changes
* New ids:
  Nikon DSC D3x, D5300
  Nikon Coolpix P330
  Canon PowerShot S95, S120, SX260HS, SX280HS, SX160IS, A2500, A2600, Elph135, IXUS 300HS, IXUS 255HS
  Canon EOS 1200D
  Sony DSC-A900, Alpha 6000, DSC-HX5V
  Casio EX-ZR700, 
  Fuji FinePix AV-150, T200
* Massive logging and error handling cleanup by Axel Waggershauser
* cleanup of the USB data handling
* Bugfixes

st2205:
* add support for a new type of 240x320 picture frames

all:
* Massive logging and error handling cleanup by Axel Waggershauser.
* Various cleanups from David Berrange for mingw32 builds.
* fixed libgd detection and linking.

print-camera-list
* add a mode to print udev rules for the non-standard USB support (usbscsi/usbdisk),
  needed additional to HWDB databases.

translations:
* updated ukrainian, vietnamese, polish, french, finish, chinese, danish, dutch,
------------------------------------------------------------------------------
libgphoto2 2.5.4 release

ptp2:
* Sony SLT DSLR support: SDRAM capture, Tethering, Triggering movie capture, property reading
* Nikon DSLR: bulb mode implemented in newer DSLRs (D600/D7100/D5200 and later)
* Nikon capture adjustments (always set controlmode before capture).
* Nikon capture in "live view mode" no longer does autofocus, use "autofocusdrive".
* Nikon "applicationmode" setting added.
* Nikon Coolpix capture failure on empty cards fixed.
* Some Canon EOS 5D Mark III config adjustments/additions.
* Canon EOS: enable trigger capture 
* Olympus E-series capture: some improvements.
* ptp2: implemented device property description caching
* New IDs
  - Sony DSC-W510, SLT-A58 (control)
  - Nikon P80 v1.1
  - Canon A3500IS, A1400, SX170IS, SX510HS, A2200
  - Fuji FinePix S4850, JX370, S4850
  - Apple iPhone 5

ax203:
* support for picture frame with id 1.

sierra:
* Reimplemented a libusb based mass storage tunneling driver to support
  non-Linux systems (e.g. Mac OS X).

libusb1:
* fixed timeout detection for USB interrupts

all:
* Lots of small fixes to build with mingw32.

Translations updates:
* Danish, Spanish, French, Dutch, Polish, Russian, Serbian, Ukrainian,
  Vietnamese

------------------------------------------------------------------------------
libgphoto2 2.5.3.1 release

packaging:
* "print-camera-list hwdb" output mode added for udev versions >= 201.

  Put this to /usr/lib/udev/hwdb/20-gphoto.hwdb (your udev hwdb directory might be different)

  Added a missing "i" in the PTP matcher.

------------------------------------------------------------------------------
libgphoto2 2.5.3 release

packaging:
* "print-camera-list hwdb" output mode added for udev versions >= 201.

  Put this to /usr/lib/udev/hwdb/20-gphoto.hwdb (your udev hwdb directory might be different)

* "print-camera-list html" output mode added for http://gphoto.org/proj/libgphoto2/support.php

all:
* Lots of Coverity fixes merged

ptp2:
* Nikon: added a new PTP capture opcode function, allows capture to card during liveview
* Nikon: rewrote some of the wait logic in the capture routines
* Nikon: enable --trigger-capture support
* Nikon: hook up some more configuration variables (funcbutton, previewbutton, menusandplayback, changeafarea)
* canon: hook up configuration variables (colortemperature)
* ptpip: several contributed bugfixes, and event handling
* panasonic: allow deleting files by setting MTP Responder code.
* new ids:
  * Kodak Z8612 IS
  * Sony DSC-S780, SLT-A57, SLT-A58, SLT-A99v, DSC-RX100M2, Alpha A3000, NEX 6
  * Nikon Coolpix S3200, DSLR D3200, J3, V2, S02, 2200v1.1, S4300, S2700, L27, S02, V2, J3
  * Panasonic TZ-8
  * Olympus E-M5
  * Canon Rebel G15, EOS 70D, A1000IS, SX150IS, A810
  * Canon Rebel T3, EOS 1Dx, EOS 70D
  * Fuji FinePix SL1000, S2980
* merged ids from libmtp
* lots of bugfixes

canon:
* label PowerShot S110 from 2001 differently than the 2012 PowerShot S110.
* fixed "new / downloaded" logic
* disable unconditional "clear halt" calls as they confuse newer controllers

ax203:
* support Nantronics N25S80 chipset

directory:
* support NRW files

sierra:
* capture fixed for Olympus C-3030

pentax:
* Various fixes from Jiri Pinka

jd11:
* enhanced de-bayering a bit

translations:
* new czech translation by Pavel Borecki.
* updated czech, danish, dutch, polish, russian, seribian, ukrainian,
  french, vietnamese, taiwanese

libgphoto2:
* use generic macros to check for libGD and libxml2 to allow better handling.

libgphoto2_port/disk:
* check the right fstab field for ignoring filesystems (avoids autofs scans)


------------------------------------------------------------------------------
libgphoto2 2.5.2 release

ptp2:
* Fixed Raspberry Pi and USB 3.0 "connect only once" problem.
* Experimental Olympus E-series (not Pen) remote control support. Try in "Control" mode.
* Nikon DSLR: real movie capture! (use --set-config movie=1/0 and --wait-event)
* New ids:
  Sony: DSC-A900, SLT-A350, DSC-RX1, HX300, NEX-3N
  Nikon Coolpix: P80, L820, S9500, S620, P520, S2500, S2600
  Nikon Coolpix A
  Nikon DSLR: D2Xs, D4, D7100
  Nikon J2
  Canon Powershot: S100, A1300IS, A2300IS, 
  Canon EOS: 700D, 100D
  Fuji FinePix: H20EXR, X20
  Samsung: NX1000, EK-GC100
  Also various MTP device ids merged from libmtp.
* ptpip: major/minor number was switched in init packet.
* Nikon DSLR: out of focus during capture fixed, various bugfixes
* Nikon "controlmode" config for unlocking the camera.
* Canon DSLR: "keepdeviceon" pinging in get_config, liveview
* Canon thumbnail retrieval fixed.
* Lots of work on getting Olympus E-series DSLRs in Control mode
  to run.

canon:
* wait-for-event: handle when camera goes offline during waiting.
* fixed mtime 0 (Jan 1 1970) issue when downloading files and using --filename

sierra:
* Fixed the Nikon Coolpix 4300 and 2500 USB over SCSI capture mode.
* Ignore register 4 read errors after capture as Nikon does not supply them.
* added commented code on how to switch the Coolpix 2500 to RAW DIAG mode.

libgphoto2_port:
* gp_port_reset functionality to do a port reset.

libgphoto2_port/usbscsi:
* Use timeout supplied by driver, not hardcoded 1.5 seconds (fixes Nikon sierra capture).

translations:
* updated ukrainian, finish, dutch, polish, russian, french, vietnamese, german

build:
* specify lots of _BSD_SOURCE et.al. to make the strict MacOS ports
  build happier. Might break non Linux platforms, please report this.

* libxml2 needed for Olympus E series capture support.

* cleaned up AM_CPPFLAGS/CPPFLAGS usage, do not use both of them together.

------------------------------------------------------------------------------
libgphoto2 2.5.1.1 release

ptp2:
* fixed 32bit architectures
------------------------------------------------------------------------------
libgphoto2 2.5.1 release

translations updates
* lots of translations synced to 2.5.0 release

ptp2:
* Lots of new USB ids added
  - Sony RX100, SLT-A65V, HX200V
  - Nikon Coolpix S01, S3300, P7700, S8200, P510, J1
  - Nikon DSLR D600, D800E, D800, D5200
  - Panasonic DMC LX7
  - Olympus SP-720UZ, E-PL5
  - Canon PowerShot D10, IXUS 310IS, SX220HS, G1 X, SX40HS, 
    A4000IS, SX240HS, A2400IS, S110, SX500IS
  - Canon EOS M, EOS 650D, EOS 6D
  - Fuji FinePix S2950, S4300, X-S1, HS30EXR, XF1
* wait-for-event also for Canon PowerShot (capture capable ones)
  now waits for "shutter press" signal and triggers a capture.
* Canon Powershot Preview mode fixes
* various Nikon configurations added: angle, flickerreduction,
  rawcompression, remotemode.
* Nikon DSLR to-ram capture fixes
* merged music player ids from libmtp. Includes big Samsung devices rename.
* EOS preview capture bugfixes: some waiting reduced to allow higher
  preview / regular capture speed on Canon EOS, understand newer EOS.
* some more bug fixes

ax203:
* SST25VF080 and SST25VF016 support added.
* ax206 support enhanced.

canon:
* decode "zoom" settings better
* "shootingmode" fix

libgphoto2_port/libusb1:
* bugfixes

examples:
* focus.c, sample-justfocus.c: focusing example added

------------------------------------------------------------------------------
libgphoto2 2.5.0 release

libgphoto2 API:
   * gp_context* functions no longer get varargs, but preprocessed
     strings. This makes hooking them into other language bindings
     easier.

   * gp_file_new_from_handler(): Allow passing data in and out via
     handler functions (to allow streaming). See also CameraFileHandler
     function pointers.

   * CameraFileInfoFile: removed "name" structmember and GP_FILE_INFO_NAME
     flags.
     Use direct passing in of the filename to the API functions.

   * New: gp_camera_autodetect(CameraList *list, GPContext*);

     Simple autodetection function returning all current detected cameras.

   * (TODO: not yet New: gp_camera_open (Camera *camera, const char *name, const char *port, GPContext *context);

     Simple open function without needing to involve libgphoto2_port.
     )

   * gp_file_set_name() and _get_name() passing in is no longer needed
     and the API will go away.

   * New gp_file_get_name_by_type() will convert a regular filename ("normal")
     into one depending on type (e.g. "raw_" prefix) and adjusted suffix
     (like ".ppm" turning into ".pgm" for grayscale previews).

   * gp_file_set_type() and gp_file_get_type() are gone, these functions
     are now implicit passed via arguments to the the put_file and
     set_file_noop() functions.

   * gp_filesystem_set_info_noop(), gp_filesystem_set_file_noop(),
     gp_filesystem_put_file(), gp_camera_folder_put_file():

     Added "filename" argument to pass in the filename. The one
     from CameraFileInfoFile and CameraFile are no longer used.

     Added "type" argument to pass in the filetype (GP_FILE_TYPE_*).

   * Adjusted to new GPPortInfo handling.

   * Rewrote gphoto2-filesys.c to be directory based (in a tree structure).
     Change should not be visibile outside of gphoto2-filesys.c.

libgphoto2_port API:
   * GPPortInfo is now abstracted and internal.
     
     If you need to retrieve name, path or type, use
	     gp_port_info_get_xx (info, &x);
     to get the value.
     Name and path strings continue to be owned by libgphoto2_port,
     do not modify and do not free.

     You are not supposed to create / append new ones to GPPortInfoList.

   * Disk Settings have been removed from the Settings union. Should
     not affect frontends at all.

   * Started using symbol versions.

PTP2 driver:
   * Lots of improvements.
   * PTP Object management rewritten, able to do "on demand" loading.

Directory driver:
   * Use GPPortInfo instead of settings to pass basepath in.
   * Abstracted common functionality.

Build:
   * Removed dummy README file from SVN.
   * Ship README.packaging in dist tarball for the first time.
   * Allow building "all plus non-default" camlibs.
   * Fix libltdl test compile for cases with LDFLAGS defined.

Documentation:
   * Optionally (--enable-internal-docs) build internal doxygen docs
     with call graphs and all the dirty details.
   * Improved docs on how to selectively build camlibs.

Test cases:
   * Test camlib loading of both uninstalled and installed camlibs.
------------------------------------------------------------------------
libgphoto2 2.4.14

packaging:
* new udev 175 mode for print-camera-list (from Ubuntu)

libgphoto2:
* fixed stupid bug in directory listing (fixes "canon" driver)

libgphoto2_port/usb:
* Fixed stv680 usb config alternate setting (unbreaks stv680 driver)

canon:
* enhanced wait_for_event a bit.

ptp2:
* Nikon viewfinder enable/disable via config
* added Nikon S6000, Canon PowerShot A3000, PowerShot SX230HS, Canon EOS 5D Mark III, Sony SLT A35, Nikon Coolpix AW100
* lowlevel Canon EOS CustomFuncEx support added
* Canon EOS 5D Mark III imagesize packing/unpacking support
* Samsung Galaxy file handling support restored
* match configuration table values more exact and correct.
* mtp player list synced with libmtp

translations:
* updated russian, ukrainian, danish, czech, german

examples:
* sample-tether added

libgphoto2 2.4.13

libgphoto2_port/libusb1:
* fixed accessing freed memory which lead to non-working communication
* use the correct context everywhere avoid crashes on startup on newer libusb1
* fixed and rewrote the whole device caching mechanisms for major initial speedup.

ptp2:
* Implemented fast Canon EOS directory loading

storage:
* add ogg, mp3, mp4 extensions to "good"

translations:
* updated polish
  
libgphoto2:
* capture to card added a lonely file to a camera folder
  instead of getting the content from the card

------------------------------------------------------------------------
libgphoto2 2.4.12

libgphoto2_port:
* Added libusb 1.0 port driver.
* removed baudboy.h support from serial driver.
* Updated translations: czech, german

canon:
* Secondary RAW 2 format for some cameras.

directory:
* Handle more suffixes to mimetypes (unknowns will not show up in the
  file list): moov, qt, qtvr, mp2, mpeg, mpe, srw, 3gp, 3g2, dif.
* set the correct filetime

ptp2:
* New cameras:
  Kodak C1530
  Sony DSC-HX100V, DSC-A1000, SLT-A55
  Nikon CoolPix P7000, P7100, P500, L120, L23, S5100, S3100, 
  Nikon D2Hs, D5100
  Canon EOS 10D, 1D Mark IV, 1100D, 600D
  Canon PowerShot A2000IS, A3100IS, 
  Fuji FinePix F80EXR, X10
  Apple iPad, iPhone 4
  Panasonic DMC-TZ18, TZ20

* Canon Powershot event handling changed to no longer use PTP Events.
  Should now be more reliable on MacOS.

* Nikon configurations added: videomode, scenemode, exposure program mode,
  effect mode, liveviewaf, liveviewaffocus, cleansensor, microphone, moviequality,
  autodistortioncontrol, autoisopadv renamed to minimumshutterspeed.
* Allow per-camera configuration tables.
* Canon EOS configurations added: "Immediate" for shutter button pressing,

* Handle missing runtime iconv module support (as found in embedded devices)
* Bump retries on EOS liveview getting
* Fixed stupid EOS event handling bug that caused a 1.5 second delay
* Fixed more session startup issues
* Tried a fix for getting bad thumbnail lengths

sierra:
* Bugfix: handle ACK as valid response code

tp6801:
* New driver for Tenx tp6801 picture frames from Hans de Goede.

digigr8:
* added Digital Blue Barbie Camera DC150, Cobra Digital Camera DC150,
  Aries Digital Keychain Camera, ITEM 128986, Lego Bionicle

jl2005c:
* added Sakar Nickelodeon iCarly no. 88061, Sakar Dora the Explorer no. 88067,
  Jazwares Star Wars no. 15256

libgphoto2:
* make jpeg and gd support configurable (Gentoo)
* Updated translations: pl

------------------------------------------------------------------------
libgphoto2 2.4.11

ax203:
* Various new ids:
  GigaDevice GD25Q40, GD25Q80, GD25Q16
  ST M25P08, M25P16, M25P32, M25P64
  Winbond W25Q80, W25Q16, W25Q32
* Various bugfixes

canon:
* implemented a basic wait_for_event() so --capture-tethered works
  (not working correctly for CR2+JPG, but JPG or CR2 stand alone will work) 
* Some bugfixes

digigr8:
* Added Lego Bionicle camera.

directory:
* More mimetypes that are images added

jl2005c:
* Reduced stack usage (do not have 5MB arrays on the stack),
  making it work in programs with stacklimits

mars3:
* Added Shift3 camera.

sierra:
* rewrote the USB wrapped command handling to use "usbscsi"
  port. Now its no longer necessary to detach the mass storage
  driver.

ptp2:
* Allow by-camera specific configuration (used for Nikon DSLR currently)
* Added some Nikon D90, D3s specific tables.
* Canon EOS: support remoterelease (remote trigger manipulation) via eosremoterelease
  config option
* Merge some CHDK code (not tested working with my SX100IS -Marcus)
* Make setting properties via the "other" config tree work.
* merged new media player ids from libmtp
* Timeouts configurable
* New cameras:
  Kodak Z710, C183
  Nikon CoolPix S7c, P90, P100, S8000, S3000, S9100
  Nikon DSLR D3s, D3100, D7000
  Casio EX-Z65
  Canon Powershot SD1300 IS, SX210 IS, SX130 IS, 
  Canon EOS 60D
  Fuji FinePix A220, Z700EXR, 
* Some capture bugfixes
* Lots of bugfixes

st2205:
* Minor additions

libgphoto2_port/usb:
* Avoid MTP probing. Done by libmtp these days, also confuses some devices.
* Do list less usb:XXX,YYY ports for things that are not cameras.

libgphoto2_port/usbscsi:
* Fixed symlink handling in device detection for newer kernels.
* Decode SCSI sense data received.

libgphoto2
* Updated translations: danish, german, spanish, basque, french,
  hungarian, italian, japanese, dutch, polish, russian, swedish, ukrainian,
  vietnamese, simplified chinese

libgphoto2_port
* Updated translations: czech, danish, german, spanish, basque, french,
  italian, japanese, dutch, polish, brazilian portuguese, russian, slovakian,
  swedish, ukrainian, vietnamese, simplified chinese, traditional chinese

------------------------------------------------------------------------
libgphoto2 2.4.10.1

This is a regression + translation fix update only

translations:
* libgphoto2_port updated: russian, slovakian
* libgphoto2 updated: italian, polish, russian

sts2205:
* Fix build without GD development headers due to stray ;

ptp2: 
* linear backoff waiting for Nikon events to reduce load
* ptpip senddata fix (was broken before)
* be more careful with USB interrupt checks on MacOS X, as they do
  not timeout currently.

------------------------------------------------------------------------
libgphoto2 2.4.10

This is a 2.4 release branch update.

libgphoto2:
    * Translation updates (polish, vietnamese).
    * The "usb:" generic matcher entry is not reported anymore.
      Auto detection will now always return "usb:XXX,YYY" and "usb:AAA,BBB" values.

      You can still pass "usb:" in.

    * The generated UDEV rules for version 136 and later have been changed:
      - PTP class is shortcut to avoid 1000 entries to be evaluated for the common camera case.
      - USB Mass Storage is now skipped and not tagged as gphoto supported.
        This should avoid confuse users with MTP players in dual mode.

       (Done just for the cameras and MTP players, not for the picture frame drivers).

st2205:
    * Link iconv (MacOS build fix)
    * "delete all files" implemented.

ax203:
    * Various improvements and bug fixes
    * new compression method supported for ax206

ptp2:
    * New PTP event handling added.
      This might have caused some instabilities in capture code.

    * Fixed EOS capture to card waiting 1 minute bug
    * Fixed EOS capture "no focus" waiting 1 minute bug
    * EOS "eosviewfinder" enable/disable option.
    * Pass up more EOS events via wait_for_event (property changes, and all unknown events).
    * EOS Viewfinder Zoom Level and Position added
    * Fixed setting multiple configuration values at once.
    * Handle MTP -> Vendor id mapping for PTP/IP cameras.
    * Lots of bug fixes.
    * Added new IDS:
      Kodak Z950
      Sony DSC-S370
      Nikon CoolPix 7600, L110
      Panasonic FZ38, DMC-GF1 (only download support), 
      Canon PowerShot D10, SX120 IS
      Fuji FinePix F60fd, F70 EXR, S1800, S5800
      Pentax Optio W90

sierra:
    * Added Olympus E-520

canon:
    * ability to read and set "shooting mode".

digigr8:
    * merged from TRUNK: new camera "Stop & Shop 87096", some cleanups and bug fixes

jl2005c: 
    * Decompression decoded and driver now working. Enabled by default now.

libgphoto2_port/usbscsi:
    * Check for scsi/sg.h and use it only if present (MacOS build fix)

libgphoto2_port/usb:
    * Do not filter out "usb:XXX,YYY" ... but have both usb: and
      usb:XXX,YYY for now.

------------------------------------------------------------------------
libgphoto2 2.4.9

This is a 2.4 release branch update.

ptp2:
   * Fixed EOS viewfinder capture speed (2 images/s -> 20 i/s)
   * EOS event handling cleaned up, so that we can also have
     dual image capture (RAW+JPEG).
   * New Canon EOS properties: autoexposuremode, cameraoutput, evfmode, uilock.
   * New Nikon property: exposuredelaymode
   * Fixed a Canon PowerShot configuration bug that caused hangs.
   * Fixed a Nikon CoolPix configuration bug that caused hangs.
   * Fixed shutterspeed setting to be more generic.
   * New IDs added:
	Nikon Coolpix 8800, P6000, L20, L19
	Panasonic FS62
	Olympus FE4000/X920/X925, 
	Canon EOS 550D
	Canon Powershot A2100IS, SD970IS, SX20IS, IXUS 120IS
	Fuji FinePix S1500, Z35, S2500HD
	Apple iPhone 3GS
   * Some bugs fixed, some memory leaks closed.
   * music-players.h merged from libmtp, bringing new MTP devices.

ST2205 Driver:
   * New Pictureframe driver from Hans de Goede. st2205 based frames present
     themselves as a regular usb mass storage device, but cannot be used
     as a normal disk! Communication with the device happens by a special
     protocol which consist of reading / writing sectors of the disk at
     certain magic offsets. Also included is a "usbdiskdirect" port driver,
     which allows the direct sector access the camlib for these devices needs.

AX203 Driver: 
   * New Pictureframe driver from Hans de Goede. ax203 based frames present 
     themselves as a usb mass storage cdrom, which contains the windows
     software. Communication with the device happens by issuing special
     (custom) scsi commands. Also included is a "usbscsi" port driver,      
     which allows sending the custom scsi commands.

     Note that if your ax203 frame has a usb-id of 1908:1315, you need to
     tell Linux not to touch the HID device this version also presents
     in its USB descriptor. To do this add the following on the linux kernel
     cmdline: "usbhid.quirks=0x1908:0x1315:0x4"

digita:
   Made to work again hopefully after breakage due to filesystem changes.

------------------------------------------------------------------------
libgphoto2 2.4.8

This is a 2.4 release branch update.

libgphoto2:
   * Updated translations.
   * Added read-only flag for Widgets. gp_widget_set_readonly / gp_widget_get_readonly.
   * GP_EVENT_CAPTURE_COMPLETE event added from trunk.
   * Some bugfixes.

ptp2:
   * New USB IDs for cameras:
	Kodak Z915
	Nikon CoolPix S220, S225,
	Nikon DSLR D5000, D3000, D300s
	Canon PowerShot SD770 IS, A580, SD1200, IXUS 95 IS, G11, IXY 220IS, SD940IS
	Canon EOS 7D
	Fuji S5 Pro
	Sea & Sea 2G
   	Also merged new libmtp deviceids.
   * Fuji S5 Pro capture support.
   * Bugfixes in Canon EOS preview code.
   * Fixed NIKON DSLR shutterspeed not able to set bug.
   * Nikon error decoding.
   * Several Canon EOS configuration and capture additions and fixes, focus pulling.
   * PTP protocol stability improvements.
   * Lots of bugfixes.

sierra:
   * restrict list of choices for Nikon Coolpix 4300

directory:
   * Merged from TRUNK to gain the good stuff.

libgphoto2_port/usb:
   * Updated translations.
   * Check for MTP devices by string descriptor first and by OSD later.

------------------------------------------------------------------------
libgphoto2 2.4.7

This is a 2.4 release branch update.

libgphoto2:
   * Translation updates from translationproject.org.
   * Widget and choice lists now dynamic, to be able to create longer ones.
   * 3rd generation UDEV rules emission, now able to emit "post HAL"
     UDEV rules.

     print-camera-list udev-rules version 136 > /lib/udev/rules.d/40-libgphoto2.rules
  
   * Disabled LRU of images. Not really useful in times of USB 2.0,
     also disabled by at least Debian und Ubuntu already.

libgphoto2_port / USB:
   * If we detached a USB driver, reattach it on close.
     This allows using e.g. cheap camera as both webcam with in-kernel
     driver and still camera with libgphoto2.

PTP2 driver:
   * Renamed various configuration options and changed values to
     match a unified model. Some common names have changed:
          owner->ownername
          exptime->shutterspeed
          eos-* -> non-eos prefixed variants
          etc.
     You will need to review configuration setting code if you have any.

   * Create config submenus /actions for action triggers and /status for
     read-only values, moved stuff there.

   * New IDs:
   	Kodak M863
	Canon Digital IXUS 110IS, IXUS 100IS, Powershot SX200IS, SD780 IS, A1100IS
	Canon EOS 500D
	Fuji Finepix F200 EXR
	Apple iPod Touch first generation


   * Lots of Canon EOS capture improvements, for card capture, for LiveView,
     and for property setting. More properties are now possible.
   * Canon EOS Bulb mode support (available in newer canons).
     --set-config bulb=(0|1)

   * Fixed Nikon DSC shutterspeed setting (also for times < 1/1000)
   * Enable Viewfinder on demand for Canon Powershot, not for all capture things.
   * Generic PTP Property Get/Set in the configuration handling.
   * Decode more Nikon DSC properties (for D90 now nearly complete).
   * Turned several PTP generic commands to macros to reduce number of functions.
   * MTP player list synced with libmtp 1.0.
   * Lots of bugfixes.

Canon driver:
   * Renamed various configuration options and changed values to
     match a unified model.

------------------------------------------------------------------------
libgphoto2 2.4.6

This is a 2.4 release branch update.

PTP2 driver:
   * Fixed Nikon DSLR capture in LiveView mode (like gtkam uses).
   * More Canon EOS stuff decoded, added experimental "capturetarget" support
     for EOS.
   * Canon EOS LiveView support (experimental, reported working for EOS 1000D).
   * Added new USB ids:
	- Kodak V803, M1063
	- Canon PowerShot A650IS, SD990 (aka IXUS 980IS), SD880IS, A480
	- Canon EOS 50D
	- Fuji FinePix S1000fd
   * Retrieve filedates again from PTP objects.
   * speedup: Do not list files on / (there aren't any).
   * Bugfixes.

Canon driver:
   * Support Exposure Bias setting.
   * More shutterspeeds.

libgphoto2:
   * Fixed a problem during file retrieval which causes Canon Normal 
     --capture-image-and-download errors, handle CR2 and CRW mimetypes.
   * Fixed ordering of filelists again that broke the digigr8 driver.
   * Translation updates.

digigr8: 
   * Added a new version of the disney pix micro.

------------------------------------------------------------------------
libgphoto2 2.4.5

This is a 2.4 release branch update.

PTP2 driver:
   * Increased timeout for Canon Viewfinder enable.
   * Fixed intial Canon timeout (0.5 -> 1.5 seconds), was too small
     for some Canons.
   * Canon EOS capture mode and tethered mode bugfixes.
   * Nikon DSLR LiveView support, with Autofocus and ManualFocus Drive possibility.
   * Nikon tethered capture fixes.
   * New cameras listed:
                Nikon CoolPix P50, S60
                Canon Digital IXUS 85
                Canon PowerShot A740, G10,
                Canon EOS 5D Mark II
   * Merged new IDs of Music Players from libmtp.
   * Lots of bugfixes.

KODAK DC240:
   * Made driver work again.
   * Cleanups

libgphoto2:
   * rewrote gphoto2-filesys.c to be dynamic and fix LRU problems.
     (backport from TRUNK)
   * Translation updates.

libgphoto2_port:
   * added --enable/--disable configure options for: disk, serial, ptpip
   * added --with/--without configure options for: bonjour, hal
   * backported Gentoo "if just canon driver selected, auto-select ptp2 driver"
     usability fix.
   * Translation updates.
------------------------------------------------------------------------
libgphoto2 2.4.4

libgphoto2:
   * Updated translations from translationproject.org

PTP2 driver:
   * Developed in parallel with TRUNK.
   * Only retrieve and initialize the ptp filesystem if needed
     (this will give speed ups for config operations, basic
      init and summary.)
   * Export the hidden vendor specific properties of the current Nikon DSLRs.
     (over a hundred with all camera configuration details...)
     (D80, D90, D300, D700, D40x got, D200 guessed)
   * Lots of new Nikon DSLR and Canon Powershot properties implemented,
     both printed in summary and available for config functions querying
     and/or setting.
   * Query and Set image protection flags (actually used by digikam).
   * Lots of bugfixes and changes in Canon and Nikon specific capture routines.
   * Some defines for PTP 1.1 added. Will have to wait for implementation until
     a device gets available.
   * New cameras added:
	Kodak C913
	Nikon D90
	Canon Digital IXUS 960IS, EOS 1000D, SD1100 IS, SX10 IS, SX110 IS
	Fuji FinePix A920, F100fd, S200HD
	Apple iPod Touch (just saved screenshots and uploaded images)
   * PTP v1.1 defines added (implementation will start once devices are available)
   * Synced MTP device list from libmtp (0.3.5 level).
   * Lots of bugfixes.

jl2005c: 
   * Experimental driver for jl2005c based cameras added.
     Can only retrieve raw images currently, no viewable images yet.
     Not builtin by default. ./configure --with-drivers=all,jl2005c

libgphoto2_port:
   * Updated translations from translationproject.org

   * Serial driver: do not lock device during probe to reduce startup
     time.

------------------------------------------------------------------------
libgphoto2 2.4.3

This is a 2.4 release branch update.

libgphoto2:
   * Adaptive Homogeneity-Directed Bayer array conversion added, used
     in several camera lib drivers.
   * Translation updates for various languages.
   * libtool 2.x build fixes
   * Various MacOS X compile fixes again.
   * gp-byteorder.m4 fixes for newer glibcs.

Example programs:
   * Addes some basic library usage example programs and helpers.

PTP2 driver:
   * Merged camlib from TRUNK.
   * Tethered Capture support for Canon EOS 40D, 400D, 450D.
   * Always handle "no directory linking to /" problem.
   * Disable more Panasonic cameras (product id 0x2372 is always mass storage)
   * Some MTP fixes, lots of new MTP devices.
   * Fixed canon viewfinder issues on Canon PowerShot SX100IS.
   * Fixed a ptp property packing issue exposed
     by newer Nikons.
   * Added new devices:
  	 Kodak M893 IS, C813
	 Nikon CoolPix L16, CoolPix 8700, DSC 700
	 Canon EOS 1D Mark III, IXUS 90IS, EOS 50D
	 Apple iPhone 3G

Canon driver:
   * Fixed some unlock keys problem for EOS cameras.
   * Moved over several PTP2 supported cameras to the PTP2 driver only.

Sierra driver:
   * Implemented basic Storage Information function.
   * Fixes for big endian or 64bit architectures by fixing struct packing.

smal driver:
   * Added support for Creative CardCam.

sq905 driver:
   * Updated postprocessing, by using "AHD" bayering and new gamma methods.
   * Bugfixes.

stv0680:
   * Storage information function.

digigr8, mars, sonix drivers:
   * Updated postprocessing, by using "AHD" bayering and new gamma methods.
 
jl2005a driver:
   * Imported from TRUNK, for new small factor cameras.
           American Idol Keychain Camera
	   NogaNet TDC-15
------------------------------------------------------------------------
libgphoto2 2.4.2

This is a 2.4 release branch update.


libgphoto2:
   * Camera abilities list sorting now uses qsort(),
     bringing startup speedups by seconds. (0.4 seconds on 2GHz machine).

   * On large files, do not try to retrieve thumbnails.

   * Updated lots of translations.

PTP2 driver:
   * Full merge of TRUNK ptp2 camlib.

   * Lots of new IDs added. Also changed MTP id handling to share devices
     with current libmtp.
   * Canon now can capture to both CF/SD Card and internal memory
     with extract/retracting the lens. "capturetarget" config option
     determines which ones used.

   * EOS capture support made working with newer Canon EOS models,
     now reported working for EOS 400D, 450D, 40D.

   * Handle MTP -> Canon/Nikon vendor id transitions better.
   * Download cancellation support.
   * Handle canon cameras with shorter timeouts on startup (hopefully
     does not break) to avoid very long second startup delays.

   * Lots of bugfixes.

Canon driver:
   * Configuration of Flash, Beep and Zoom added.
   * Enable/disable remote mode only once per session (on demand)
   * Fixed a CR2 thumbnail download problem.
   * Fixed a THM download problem (for movies).
   * Moved some more cameras over to PTP2 driver.

Topfield driver:
   * New driver for Topfield PVR5000 device(s).

* Sony DSC F1 (old serial) driver:
   * Merged from TRUNK, working now.

libgphoto2 2.4.1

This is a 2.4 release branch update.

Package / System integration:
   * HAL FDI files now use "info.subsystem" instead of "info.bus", required
     by hal after March 2008.

   * Suppress another Olympus camera in FDI file that is better of done
     using Mass Storage only.

libgphoto2_port:
   * Suppress more known network filesystems in "disk" autodetection
   * disabled usb_reset for Canon cameras in "usb", broke EOS cameras.

PTP2 driver:
   * Merged all new Camera IDs from TRUNK.
   * Configuration bugfix for multiple options with the same name.
   * Capture bugfix for Nikon Coolpix
   * Various small bugfixes.

Canon driver:
   * Increased the event timeout, so operations work again.
   * Fixed a bug in interval capture
   * some additional configuration values for newer cameras

Mars driver:
   * Synced with SVN TRUNK (1:1 copy).
	   * Better whitebalance postprocessing
	   * Camera ids added
	   * Decompression fixes

Digigr8 driver:
   * Synced with SVN TRUNK (1:1 copy).
	   * bugfixes

Sonix driver:
   * Synced with SVN TRUNK (1:1 copy).
	   * bugfixes
------------------------------------------------------------------------
libgphoto2 2.4.0 release

Build:
   * Non-recursive camlib build: Makes "make -j2" useful.
     "./configure --with-drivers=..." still works. Selective camlib
     rebuild is "make -C camlibs agfa_cl20.la" now. Selective camlib
     install is "make DRIVERS='canon.la ptp2.la' install-drivers".
   * Fix sierra and canon drivers picking up old gphoto2 headers.
   * libiconv linking fix for PTP2 driver.
   * Require external libltdl.
   * Ditched autogen.sh, use standard autoreconf from stock autoconf.
   * Put auto* files into auto-aux/ and auto-m4/.
   * Accept utilsdir and udevscriptdir set by user (#1646520).
   * Introduce libgphoto2-uninstalled.pc pkgconfig file (#1643245).
   * Remove make dependency on $(LIBLTDL) aka "-lltdl" (#1548195).

libgphoto2 API:
   * New gp_file_new_from_fd() ... Which allows mapping CameraFile to
     UNIX filedescriptors for both reading and writing.
   * New gp_file_slurp() function (for camlib use) to sequentially
     read out CameraFiles.
   * New gp_camera_get_storageinfo() API added to get programmatically
     the storage information(s), like capability, free space and labels.

     On cameras not supporting it returns GP_ERROR_NOT_SUPPORTED.

   * Enhanced Bayer algorithm added globally.

Package / System integration:
   * New syntax for print-camera-list's udev output. See help output.
     
     Note that we generate udev >= 0.98 output by default.

     Use "version pre-0.98" on the commandline to generate the old version.

   * Add new permission setup binary doing Microsoft OS Descriptor
     retrieval for MTP devices not explicitly listed.
     This binary (check-mtp-device) is used by the generated UDEV rules.
     (Not working currently since udev does not create the device before
     calling it.)

disk port:
   * handle automounter properly.

directory driver:
   * ignore anything not starting by '.' because it is not DCF compliant
     and it is use for things like Trash of metadata...

PTP2 driver:
   * For Canon capture capable cameras, enable shutter and aperture control
     using "shootingmode" property (PTP d00c), and focuslock mode.

   * New dataflow engine, making it possible to upload/download images
     or songs without taking up any system memory. (think multi GB movies
     on small devices).

   * Enhanced MTP protocol handling.

   * Cleanups and bugfixes.

   * New USB IDs for cameras:

 	Canon PowerShot SD1000, SD900, A450, A550, A560, A570, A420, SD40, SD750
 	Canon PowerShot S5 IS, SD1000
	Canon Digitial IXUS 70, 75, 900Ti, iZ
	Canon MV750i
	Nikon CoolPix S4, S6, P4, L10
	Nikon DSC D40, 
	Kodak EasyShare C433, C613, C653, C743, C875, V570, V610, V705, P880, V603, Z712 IS
	HP Photosmart R967
	Minolta DiMAGE x21
	Fuji FinePix F20, F40, S9500
	Casio EX-Z700
	Sony DSC N2, W35, W200
	Apple iPhone

   * Several new USB IDs for MTP players, including
     all from libmtp:
	iRiver T20, N12, iFP-800, T20 2, Clix2
	Archos 504, Toshiba Gigabeat P20
	Philips PSA235, SA9200
	Samsung YH-925GS
        SanDisk Sansa c250

Canon driver:
   * Enable formerly experimental 20D support code by default.

   * Moved handling of some cameras to PTP2 driver, since they cause
     as yet unidentified errors.
------------------------------------------------------------------------

libgphoto2 2.3.1

PTP:
   * Fixed a memory leak in continuous Nikon / Canon capture mode.

Bindings:
   * Moved all bindings into separate packages.

Package / System integration:
   * Add README.packaging file for packagers.
   * Removed obsolete print-usb-usermap. Use
     "print-camera-list usb-usermap usbcam" instead.
   * Fix libgphoto2 symbol list: Removed gpi_gphoto_port_type_map
   * Add new permission setup script doing class based matching for
     PTP class cameras not listed explicitly by USB IDs.
     This script (check-ptp-camera) is used by the generated UDEV rules.

     Example usage:
	 print-camera-list udev-rules mode 660 group plugdev \
              > /etc/udev/rules.d/90-libgphoto2.rules

     or similar and set udevscriptdir='/lib/udev' at configure time or adjust
     the path to check-ptp-camera in the generated /etc/udev/rules.d/90-libgpoto2.rules
     file.

----------------------------------------------------------------------------

libgphoto2 2.3.0

PTP:
   * Improved Nikon remote control
   * Improved Canon file download
	- faster directory retrieval (especially on cameras with lots of files)
	- "new" images are marked (gphoto2 --new, digikam)
   * MTP Playlist support (upload and download)
   * MTP Metadata support (upload and download, Artist, Title, Playtime ... )
   * Lots of other MTP related fixes.
   * MTP autodetection on Microsoft OS Descriptor.
   * New devices:
          Canon PowerShot A540, A530, S3 IS, SD430, SD700, IXUS 800,
		IXUS 60, A630, SD630, G7, Digital IXUS 65, 710IS, EOS 400D,
		Digital Rebel XTi, IXUS 850 IS, PowerShot A640,
		IXUS Wireless (USB support only currently)
          iRiver T20 FM, iClix
	  Creative Zen Vision W, Vision M, Vplus, V
          Dell Pocket DJ
          Nikon Coolpix L4, L3, L1, D80, P3
          Kodak Easyshare Z740, P850, Z612, C633, C643, C530, Z612, CD33
          Sony DSC-U10
          Leica D-LUX 2
	  Olympus IR-300
          JVC Alneo XA-HD500
	  All currently known HP Photosmarts (sync with Windows Driver .INF files)
	  various Samsung devices

Canon:
   * 5D - 20D experimental capture support (default disabled)

Kodak DC120:
   * Bugfixes to make it work.

Mars:
   * RAW files saved with size information.
   * Some new ids, lots of bug fixes.

Ricoh G3:
   * Added Ricoh Caplio R4 id.

Disk port:
   * Addes Solaris filesystem table handling.
   * Fixed a crasher.
   * Skip "fuse" filesystem.

SiPix Blink:
   * Disabled build, since it cannot the downloaded data to usable images.

Sonix:
   * Bugfixes and support for Sakar Digital Keychain 11999.

Bindings:
   * Removed the Mono/.NET bindings due to unclear license.
   * Partial Java bindings

libgphoto2 API:
   * Compiles with -pedantic in gcc's c99 and c++98 modes.
   * Marked a few definitions as being internal to the gphoto project.
   * Added gp_list_find_by_name() function.
   * Made _CameraList details private.

libgphoto2:
   * Fixed some directory handling problems for MTP players.
   * Improved error checking and propagation.
   * New error code for "fixed limit exceeded" (exceptions would be nice)
   * Added a few internal functions.

----------------------------------------------------------------------------

libgphoto2 2.2.1

   * Fix build for FreeBSD users (and other non-Linux)

----------------------------------------------------------------------------

libgphoto2 2.2.0


Build system (packagers beware!):

   * You should generate HAL FDI, linux-hotplug usb.usermap, and udev rules
     now via our program:

 	  ${libdir}/print-camera-list (hal-fdi|usb-usermap|udev-rules)

     During a chrooted build you can use:
	CAMLIBS=$BUILDROOT/usr/lib/libgphoto2/2.2/ print-camera-list hal-fdi

     This obsoletes print-usb-usermap and print-udev-rules.

     The hal FDI file should be put into:
	/usr/share/hal/fdi/information/20thirdparty/10-camera-libgphoto2.fdi

     If you need to generate different stuff based on the cameras, please add
     it to the "print-camera-list" helper.

   * Added C# (csharp) bindings

     Thanks to Patrick van Staveren <trick@vanstaveren.us>'s initiative,
     we now compile, ship and install the C# bindings. However, a few
     things will still change about it, so don't just completely rely on
     it, its file names and locations, etc. just yet.


Client programmers (KDE, GNOME, MONO, C....) with specific character
set requirements:

   * We added new function gp_message_codeset(const char*) to API.
      - If you do not call this function, libgphoto2 will give you its
        messages in the codeset defined by the system locale.
	(The system locale is defined by the LANG, LANGUAGE, and LC_*
	environment variables.)
      - Call this function with your desired codeset if you require
        libgphoto2 messages in a fixed codeset independent from the
        system locale. For example, GTK+ applications always expect UTF-8.
      - gp_message_codeset() propagates the requested charset to
        libgphoto2_port and then calls gettext's bind_textdomain_codeset()
        function.
    * Added gp_camera_wait_for_event() API, to wait for
      specific camera events and return them to the caller.


libgphoto2 changes:

   * libgphoto DSO version is now 2.1.0

   * Lots of bugs were fixed.

   * New translations were added.

Driver changes:

   * PTP

     - PTP/IP support has been added.

     - On selected Nikon and Canon cameras it is now possible to capture
       images into the Camera SDRAM and in turn downloading it to libgphoto2
       internal storage, bypassing the memory card.

       To enable it, use the "capturetarget" setting, also saved in
       .gphoto/settings.

       This is useful for:
	   gphoto2 --capture-image -f /store_00010001 -p capt0000.jpg

       Or use the timelapse capture of gphoto2:
	   gphoto2 --capture-image -F <total frames> -I <seconds interval>

       Or write your own client using libgphoto2...


     - Support of MTP devices has been greatly enhanced.

       + Creative Zen devices now work.
       + iRiver devices work, but have some protocol subtleties / flaws.

       + Object Property (Meta Data) support now works in a basic way.

	   GP_FILE_TYPE_METADATA type get and put can be used to retrieve
	   and set meta data for files.

	   get: Returns all available properties and their contents.

	   put: Set the properties found in the file to the specified content.
		The non-listed are untouched.

	   The metadata looks like:
		   <Artist>Elvis Presley</Artist>

	   gphoto2 -f /store_00010001/Folder... --get-metadata file.mp3 --stdout > meta_file.mp3
	   ... edit meta_file.mp3 ...
	   gphoto2 -f /store_00010001/Folder... --upload-metadata meta_file.mp3

	   gphoto2 --get-all-metadata	... retrieves metadata of all files, with meta_ prefix.

       - Better --summary output, listing also Storage Devices and Device abilities.

       - Lots of new device ids.
         * Canon 5D, 30D, A340, A700, S40, S80
	 * Nikon D200
         * Casio EX-Z120
         * Kodak C360, Z700
         * HP M317
	 * Panasonic DMC-LC1
         * Fuji E900
         

----------------------------------------------------------------------------
libgphoto2 2.1.99 (pre-release of 2.2)

Build system (packagers beware!):

   * now requires libltdl (from system or shipped with tarball)
   * works with contemporary build tools
   * new ./configure parameter set
   * no more accidentally building without libusb (use --without-libusb
     if you insist on that)
   * camlibs and iolibs are now installed into new directories
   * libhal 0.5 is currently an option for the disk: port.
     Distribution that ships it might want to build it with it.

libgphoto2:

   * If set, use environment variable CAMLIBS to find the camera drivers.
     Ditto for libgphoto2_port, IOLIBS and IO drivers.
   * disk: "port" for USB Mass Storage support
   * various USB fixes
   * Generate .fdi files for HAL
   * Memory usage greatly reduced by only keeping last 2 pictures
     in memory cache

Drivers (camlibs)

   * basic MTP support for iRiver mp3 players using ptp driver T10,
     T20, T30, M415

   * canon
     * IXY Digital 600 fixes
     * Added A610
     * Experimental SD500
     * Experimental A620 (not really working)

   * casio
     * various fixes in QV-10 driver

   * digigr8 (NEW)
     * support Digigr8, Che-Ez Snap SNAP-U, Soundstar TDC-35

   * kodak/dc210
     * Added DC215

   * ricoh/g3
     * Ricoh Caplio GX, GX 8
     * Ricoh R2, R3
     * Rollei dr5 

   * hp215 (NEW)
     * support HP 215

   * lg_gsm (NEW)
     * support LG T5100

   * mars
     * various fixes
     * Added Argus DC-1620, DC-1610 (experimental)
     * Added Philips P44417B

   * pdc640
     * Added Clever CAM 360

   * ptp
     * For Nikon, handle ISO speed, aperture, exposure program,
       capture, focus metering mode, flash mode, AF beep toggle
     * Nikon curve
     * Added Kodak Z730, Z7590, C340, LS753, V530, V550, C310, C330
     * Added Nikon D50, D70s, 4600, 4800, 5600, 5900, Coolpix P2
     * Added Canon A410, A520, A610, A620, IXUS 55, SD450, IXUS 750
     * Added HP R817, Photosmart M23
     * Added Olympus D-540z, C-310z, X-100
     * Added Panasonic Lumix FZ5, DMC-LZ2
     * Added Ricoh R3
     * Added Sony DSC-H1, DSC-R1
     * Added MTP devices (mp3 players)
     * Some iRiver MTP devices (mp3/ogg players) are supported too,
       but are experimental.

       While the "Creative Zen Micro" is also an MTP device, we were
       not able yet to decipher the PTP protocol deviation.

       In general, MTP devices can be supported here, but you need
       to add the ID in camlibs/ptp2/library.c directly, since they
       do not have a USB class id.

     * Now supports a "fast filesystem" mode on newer Nikon PTP cameras.
     
       This speeds up initialisation notably on cameras with lots (>50)
       of images.

       However, this mode does not find the special files on the camera
       (AUTPRNT.MRK). It also cannot represent the correct directory
       structure.

       For normal users (who just download and process the images) the
       "fast" mode is recommended.

       It can be toggled in the "Camera Settings" menu and ~/.gphoto/settings.
       
   * sierra
     * various fixes
     * Added C-770UZ

   * sq905
     * various fixes
     * fix some crashers

Bindings

   * added Java (patch# 1108091)
   * added Python (patch# 1152835)
   * added C#

Translation updates:

   * da
   * it
   * ru
   * vi
   * zh_TW



----------------------------------------------------------------------------
libgphoto2 2.1.6

General libgphoto2 features:


Drivers (camlibs):

   * sierra driver:
     - We now support the hidden Sierra Mode on Nikon and Pentax
       cameras (which are otherwise just USB Storage cameras).

       The USB Storage driver is automatically detached on open.
       
       This allows remote image capture with those cameras for
       instance.


------------------------------------------------------------------------
libgphoto2-2.1.5
------------------------------------------------------------------------

On 2004-12-16, we are proud to release libgphoto2 2.1.5 to the world.

libgphoto2 2.1.5 features support for more than 400 digital cameras.

The changes since the 2.1.4 release are mostly bug fixes and support
for new cameras, and support for multiple cameras of the same type
at the same time.

See the CHANGES file for more details.

Have fun with libgphoto2 and your pictures!

The gphoto2 team.

----------------------------------------------------------------------------
libgphoto2 2.1.5
 
   * Support multiple USB devices by introducing additional USB ports,
     usb:<bus>,<device>. 
   
drivers (camlibs):

   * PTP driver:
     - Lots of new ids were collected (across all vendors).
     - Raw download support for newer cameras fixed.

   * sq905, mars, aox drivers:
     - New drivers written by Theodore Kilgore for:
	- Aiptek Pencam VGA+, Emprex PCD3600 (mars) 
	- Concord EyeQ mini (aox)
	- Lots of SQ 905 based cameras (sq905)

   * sierra driver:
	- Toshiba PDR support added.

   * sonydscf55 driver:
	- bugfixes, downloading of MPEGs.
	
   * casio-qv driver:
	- working serial support added.

   * canon driver:
	- Several new ids added.


------------------------------------------------------------------------
libgphoto2-2.1.4
------------------------------------------------------------------------

On 2004-01-18, we are proud to release libgphoto2 2.1.4 to the world.

libgphoto2 2.1.4 features support for more than 400 digital cameras.

The changes since the 2.1.3 release are mostly bug fixes and support
for new cameras, nothing major.

See the CHANGES file for more details.

Have fun with libgphoto2 and your pictures!

The gphoto2 team.

----------------------------------------------------------------------------
libgphoto2 2.1.4 

general:

   * fixed recursion problems during capturing

   * Support for multiple USB cameras NOT included yet.
     Reason: It breaks several applications.

drivers (camlibs):

   * Canon driver:
     - added support for G5, Optura 20, ZR-70MC
     - re-added support for A300 and S50
     - fix erroneous file size limits

   * PTP driver:
     - enhanced Canon Capture support
     - added id for Canon Digital IXUS i
     - added Olympus C-350Z, D-560Z, X-250
     - added Sony DSC-U20, DSC-P52, DSC-P72, DSC-P92
     - updates from libptp2

   * ricoh driver:
     - working G3, G4 support

   * sx330z driver:
     - added Maginon SX-410z

   * spca50x driver:
     - do not delete everything and fail to download on Aiptek 1.3

   * polaroid drivers:
     - fixed support for D-Link 350F, Skanhex SX-35
     - added support for Trust 350FT PowerC@m FLASH

packaging:

   * linux hotplug scripts:
     - use correct directories in usbcam.x11-app

libgphoto2_port:

   * serial bug fix with speed 0


------------------------------------------------------------------------
libgphoto2-2.1.3
------------------------------------------------------------------------

On 2003-10-19, after a long time, we have finally released a new
version of libgphoto2.

Version 2.1.3 now features support for almost 400 digital cameras.

The most important changes since the the 2.1.1 release are:

	- PTP driver rewritten completely
	- support for lots of new cameras
	- fixed a nasty segfault bug

See the CHANGES file for a more complete list.

Have fun with your photos!

The gphoto2 team.


----------------------------------------------------------------------------
libgphoto2 2.1.3

   * builtin cache:
     - use all available RAM on systems without memory size detection

drivers (camlibs):

   * Canon driver:
     - added support for EOS 300D
     - fixed ProductID for PowerShot S45
     - fixed support for serial cameras
     - fixed thumbnail stuff

   * New driver for Ricoh Caplio G3.

   * Smal driver:
     - misc improvements

   * PTP2 driver:
     - added misc cameras
     - thumbnail hacks (?)


----------------------------------------------------------------------------
libgphoto2 2.1.2

   * fixed nasty stack overflow/segfault bug
   * improved/fixed support for Sun

drivers (camlibs):

   * All drivers:
     - report vendor/model in a new (formatted) fashion

   * Canon driver: 
     - added support for capturing on consumer class cameras, tested on
       Canon PowerShot S45, Canon PowerShot G2
     - G2 works again running from AC adapter
     - multiple new models added (A60, A70, ...)

   * PTP2 driver:
     - Next generation PTP driver added, using this as default now.

   * New Agfa CL20 driver from http://cl20.poeml.de/.

   * New camera library spca50x for all chips supporting the spca50x bridges
     (merging the gsmart, benq and spca504_flash driver into one).


------------------------------------------------------------------------
libgphoto2-2.1.1
------------------------------------------------------------------------

On 2002-12-01, after almost five months, we have finally released a new
version of libgphoto2.

Version 2.1.1 now features support for almost 300 digital cameras.

The most important changes since the the 2.1.0 release are (see
CHANGES for a complete list):

	- new support for quite a lot of new cameras
	- improved/fixed support for a lot "old" cameras
	- libgphoto2 and the gphoto2 command line utility are now
          separated
	- also moved documentation to a separate module

Have fun with your photos!

The gphoto2 team.


----------------------------------------------------------------------------
libgphoto2 2.1.1

   * separated libgphoto2 sources from gphoto2 command line interface

   * gphoto2 manual moved to separate package gphoto2-manual

drivers (camlibs):

   * Ricoh

   * Canon driver: 
     - added support for Canon PowerShot A100, Canon PowerShot A200,
       Canon PowerShot S45, Canon PowerShot S230, Canon Digital IXUS v3,
       Canon PowerShot G3
     - fixed Canon EOS D60 unlocking

   * PTP driver:
     - fixed some bugs
     - added support for Nikon D100
     - added support for Canon PowerShot S45, Canon PowerShot S230, 
       Canon Digital IXUS v3, Canon PowerShot G3 in PTP mode

   * added support for Mustek gSmart mini, Mustek gSmart mini 2, Mustek gSmart
       mini 3 and So. Show 301

   * Polaroid driver:
     - added support for USB Jenoptik JD350v

   * SoundVision driver:
     - Added support for RCA CDS1005, FujiFilm @xia ix-100,
       Oregon Scientific DShot II, Media-Tech mt-406,
       and Scott APX 30

   * added support for Aiptek Pencam and Medion MD 5319


--------------------------------------------------------------------------------
gphoto2 2.1.0

   * repaired "make rpm" target
   * started "real" gphoto2 manual

gphoto2 command-line interface:

   * optional readline support

libgphoto2:

   * support for periodic keep-alive-messages

drivers (camlibs):

   * improved support for PTP cameras:
     - multiple storage media
     - image capturing
     - driver stability and robustness improved (less problems with
       different cameras)

   * added support for Kodak DX-4900, Sony DSC-P5, Sony DSC-F707V,
        Sony DSC-P30, Sony DSC-P50, Sony DSC-S75, Sony DSC-S85,
        Sony MVC-CD300

   * added support for Canon EOS D60, Canon PowerShot A40, 
        Canon PowerShot A30, Canon PowerShot S200 aka 
        Canon Digital IXUS v2, Canon Digital IXUS 330

   * fixed support for Canon PowerShot S10

   * Added SiPix Web2 support.

--------------------------------------------------------------------------------
gphoto2 2.0

gphoto2 command-line interface:
   * Added gphoto2 manpage.

--------------------------------------------------------------------------------
gphoto2 2.0beta5

libgphoto2:
   * Added Sony DCR-PC100 support.
   * Fixed serial cameras bug introduced in beta4. 
   * Removed SiPix StyleCam from the STV0680 cameras list.

gphoto2 command-line interface:
   * EXIF support (extra tags that contain information about the image
      produced by most digital cameras).
   * Fixed broken --delete-all-images. Also, recursion is now the
      default for downloading but _not_ for deleting.
   * Localization for Simplified Chinese.
   * Progress bar à la e2fsck


--------------------------------------------------------------------------------
gphoto2-2.0beta4
--------------------------------------------------------------------------------

Hello lovers of digital cameras, gphoto2-beta4 is out! 

As you probably know, the word beta doesn't keep us from adding lots 
of new features:
   * Added/Improved cameras support (Canon PowerShot S30, ...),
   * Most functions report progress and are cancellable,
   * Support for Samsung 800k, PTP cameras,
   * STV0680 improvements,
   * Kodak DC3200 fixes,
   * Camera summary for Kodak DC240 driver,
   * and more ...

Get it from http://www.gphoto.net/dist/gphoto2-2.0beta4.tar.gz and try
it out!

We are aiming at a final release in about 2 weeks from now, therefore 
if you want to see gphoto2  (or any frontend) translated, your camera 
working, or if you have any recommendation, speak up NOW!

Happy downloading!

Your gphoto2 team.

--------------------------------------------------------------------------------
gphoto2-2.0beta4

libgphoto2:
   * Most functions report progress and are cancellable.
   * Camera libraries are now installed in a versioned subdirectories.
   * Stv0680 improvements.
   * Canon: added PowerShot S30 support, CameraFS support, big-endian
      systems support, RAW-File support.
   * Added ptp cameras support (Kodak DX series and much more).
   * Camera Summary for Kodak DC240 driver.
   * Samsung 800k support.
   * Fixed digita thumbnails bug.
   * French localization.
   * Japanese localization.

gphoto2 command-line interface:
   * Now reports progress information (when user can see it).
   * Folder recursion is now the default behaviour.
   * French localization.
   * Japanese localization.