2009-09-26 Ivan Maidanski <ivmai@mail.ru>

	* aclocal.m4: Regenerate (by autoreconf -vif).
	* config.guess: Ditto.
	* config.sub: Ditto.
	* configure: Ditto.
	* INSTALL: Ditto.
	* Makefile.in: Ditto.
	* doc/Makefile.in: Ditto.
	* src/config.h.in: Ditto.
	* src/Makefile.in: Ditto.
	* src/atomic_ops/Makefile.in: Ditto.
	* src/atomic_ops/sysdeps/Makefile.in: Ditto.
	* tests/Makefile.in: Ditto.

13 files changed, 2591 insertions, 2930 deletions

diff --git a/ChangeLog b/ChangeLog
index cba3265..d1d5557 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,18 @@
+2009-09-26 Ivan Maidanski <ivmai@mail.ru>
+
+	* aclocal.m4: Regenerate (by autoreconf -vif).
+	* config.guess: Ditto.
+	* config.sub: Ditto.
+	* configure: Ditto.
+	* INSTALL: Ditto.
+	* Makefile.in: Ditto.
+	* doc/Makefile.in: Ditto.
+	* src/config.h.in: Ditto.
+	* src/Makefile.in: Ditto.
+	* src/atomic_ops/Makefile.in: Ditto.
+	* src/atomic_ops/sysdeps/Makefile.in: Ditto.
+	* tests/Makefile.in: Ditto.
+
 2009-09-25 Ivan Maidanski <ivmai@mail.ru> (really Petter Urkedal)
 
 	* configure.ac: Replace AC_PROG_CC with AM_PROG_CC_C_O.
diff --git a/INSTALL b/INSTALL
index 2e2cea9..23e5f25 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,23 +1,236 @@
-The configuration and build scripts for this package were generated by
-automake/autoconf.  "configure --prefix=<install dir>; make; make install"
-in this directory should work.
+Installation Instructions
+*************************
 
-Note that much of the content of this library is in the header files.
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
 
-However two small libraries are built and installed:
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
 
-- libatomic_ops.a is a support library, which is not needed on some platforms.
-  This is intended to be usable, under some mild restrictions, in free or
-  proprietary code, as are all the header files.  See doc/LICENSING.txt.
-- libatomic_ops_gpl.a contains some higher level facilities.  This code is
-  currently covered by the GPL.  The contents currently correspond to
-  the headers atomic_ops_stack.h and atomic_ops_malloc.h.
+Basic Installation
+==================
 
-Platform specific notes:
+These are generic installation instructions.
 
-Win32/64: src/Makefile.msft contains a very simple Makefile for building
-and running tests and building the gpl library.  The core atomic_ops
-implementation is entirely in header files.
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
 
-HP-UX/PA-RISC: aCC -Ae won't work as a C compiler, since it doesn't support
-inline assembly code.  Use cc.
diff --git a/Makefile.in b/Makefile.in
index 7c3b964..b60516a 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -95,7 +95,6 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-GREP = @GREP@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -122,6 +121,8 @@ SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -136,30 +137,23 @@ build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
 datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
-htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
-localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
-psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
diff --git a/aclocal.m4 b/aclocal.m4
index aa04659..e5d6a18 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -574,6 +574,34 @@ AC_MSG_RESULT([$_am_result])
 rm -f confinc confmf
 ])
 
+# Copyright (C) 1999, 2000, 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_PROG_CC_C_O
+# --------------
+# Like AC_PROG_CC_C_O, but changed for automake.
+AC_DEFUN([AM_PROG_CC_C_O],
+[AC_REQUIRE([AC_PROG_CC_C_O])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+])
+
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
 # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
diff --git a/config.guess b/config.guess
index 278f9e9..917bbc5 100755
--- a/config.guess
+++ b/config.guess
@@ -1,10 +1,9 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-#   Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2007-07-22'
+timestamp='2005-07-08'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -107,7 +106,7 @@ set_cc_for_build='
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
 trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
 : ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
  { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
  { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
@@ -161,7 +160,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
-	    sh5el) machine=sh5le-unknown ;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
@@ -208,11 +206,8 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
 	exit ;;
-    *:SolidBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-	exit ;;
     macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -330,7 +325,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+    i86pc:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
@@ -769,19 +764,12 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    amd64)
-		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	esac
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
-    *:MINGW*:*)
+    i*:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
     i*:windows32*:*)
@@ -791,15 +779,9 @@ EOF
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    *:Interix*:[3456]*)
-    	case ${UNAME_MACHINE} in
-	    x86)
-		echo i586-pc-interix${UNAME_RELEASE}
-		exit ;;
-	    EM64T | authenticamd)
-		echo x86_64-unknown-interix${UNAME_RELEASE}
-		exit ;;
-	esac ;;
+    x86:Interix*:[34]*)
+	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+	exit ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
 	exit ;;
@@ -812,7 +794,7 @@ EOF
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
 	exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+    amd64:CYGWIN*:*:*)
 	echo x86_64-unknown-cygwin
 	exit ;;
     p*:CYGWIN*:*)
@@ -835,9 +817,6 @@ EOF
     arm*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
     cris:Linux:*:*)
 	echo cris-axis-linux-gnu
 	exit ;;
@@ -872,11 +851,7 @@ EOF
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     mips64:Linux:*:*)
@@ -895,16 +870,9 @@ EOF
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
-    or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
-	exit ;;
     ppc:Linux:*:*)
 	echo powerpc-unknown-linux-gnu
 	exit ;;
@@ -948,15 +916,9 @@ EOF
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
-	exit ;;
     x86_64:Linux:*:*)
 	echo x86_64-unknown-linux-gnu
 	exit ;;
-    xtensa:Linux:*:*)
-    	echo xtensa-unknown-linux-gnu
-	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
@@ -999,7 +961,7 @@ EOF
 	LIBC=gnulibc1
 	# endif
 	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+	#ifdef __INTEL_COMPILER
 	LIBC=gnu
 	#else
 	LIBC=gnuaout
@@ -1009,11 +971,7 @@ EOF
 	LIBC=dietlibc
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^LIBC/{
-		s: ::g
-		p
-	    }'`"
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
 	test x"${LIBC}" != x && {
 		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 		exit
@@ -1215,15 +1173,6 @@ EOF
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
 	exit ;;
-    SX-7:SUPER-UX:*:*)
-	echo sx7-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8:SUPER-UX:*:*)
-	echo sx8-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8R:SUPER-UX:*:*)
-	echo sx8r-nec-superux${UNAME_RELEASE}
-	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit ;;
@@ -1233,6 +1182,7 @@ EOF
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
 	case $UNAME_PROCESSOR in
+	    *86) UNAME_PROCESSOR=i686 ;;
 	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
@@ -1311,9 +1261,6 @@ EOF
     i*86:skyos:*:*)
 	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
 	exit ;;
-    i*86:rdos:*:*)
-	echo ${UNAME_MACHINE}-pc-rdos
-	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
diff --git a/config.sub b/config.sub
index 1761d8b..1c366df 100755
--- a/config.sub
+++ b/config.sub
@@ -1,10 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-#   Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2007-06-28'
+timestamp='2005-07-08'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -120,9 +119,8 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -173,10 +171,6 @@ case $os in
 	-hiux*)
 		os=-hiuxwe2
 		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -193,10 +187,6 @@ case $os in
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -241,16 +231,15 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| fido | fr30 | frv \
+	| fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -268,27 +257,28 @@ case $basic_machine in
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
-	| mt \
+	| ms1 \
 	| msp430 \
-	| nios | nios2 \
 	| ns16k | ns32k \
 	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| score \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu | strongarm \
+	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b \
+	| strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
+	m32c)
+		basic_machine=$basic_machine-unknown
+		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
@@ -296,9 +286,6 @@ case $basic_machine in
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
-	ms1)
-		basic_machine=mt-unknown
-		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@@ -318,18 +305,18 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* | avr32-* \
+	| avr-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32c-* | m32r-* | m32rle-* \
+	| m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
 	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
@@ -349,30 +336,31 @@ case $basic_machine in
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
-	| mt-* \
+	| ms1-* \
 	| msp430-* \
-	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
 	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
 		;;
+	m32c-*)
+		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
 	386bsd)
@@ -475,8 +463,8 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16)
-		basic_machine=cr16-unknown
+	cr16c)
+		basic_machine=cr16c-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -683,10 +671,6 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
-	mingw32ce)
-		basic_machine=arm-unknown
-		os=-mingw32ce
-		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -712,9 +696,6 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-msdos
 		;;
-	ms1-*)
-		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -822,12 +803,6 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -884,10 +859,6 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos)
-		basic_machine=i386-pc
-		os=-rdos
-		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -914,10 +885,6 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
-	sde)
-		basic_machine=mipsisa32-sde
-		os=-elf
-		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -929,9 +896,6 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
-	sh5el)
-		basic_machine=sh5le-unknown
-		;;
 	sh64)
 		basic_machine=sh64-unknown
 		;;
@@ -1137,7 +1101,7 @@ case $basic_machine in
 	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+	sparc | sparcv8 | sparcv9 | sparcv9b)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1210,23 +1174,21 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+	      | -skyos* | -haiku*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1378,12 +1340,6 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
-        score-*)
-		os=-elf
-		;;
-        spu-*)
-		os=-elf
-		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1393,9 +1349,9 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-        c4x-* | tic4x-*)
-        	os=-coff
-		;;
+    c4x-* | tic4x-*)
+        os=-coff
+        ;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1421,9 +1377,6 @@ case $basic_machine in
 	m68*-cisco)
 		os=-aout
 		;;
-        mep-*)
-		os=-elf
-		;;
 	mips*-cisco)
 		os=-elf
 		;;
diff --git a/configure b/configure
index db69bba..ad83990 100755
--- a/configure
+++ b/configure
@@ -1,54 +1,25 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for libatomic_ops 1.2.
+# Generated by GNU Autoconf 2.59 for libatomic_ops 1.2.
 #
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# Copyright (C) 2003 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
+# Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
 fi
+DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -58,43 +29,8 @@ else
 fi
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
-
 # Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
+$as_unset ENV MAIL MAILPATH
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -108,19 +44,18 @@ do
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+    $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+if expr a : '\(a\)' >/dev/null 2>&1; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -128,388 +63,157 @@ fi
 
 
 # Name of the executable.
-as_me=`$as_basename -- "$0" ||
+as_me=`$as_basename "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-if test "x$CONFIG_SHELL" = x; then
-  if (eval ":") 2>/dev/null; then
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-
-  if test $as_have_required = yes && 	 (eval ":
-(as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
 
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
 
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
 fi
 
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
 
-test \$exitcode = 0) || { (exit 1); exit 1; }
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
 
-(
-  as_lineno_1=\$LINENO
-  as_lineno_2=\$LINENO
-  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
-  :
-else
-  as_candidate_shells=
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
     as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  case $as_dir in
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
 	 /*)
-	   for as_base in sh bash ksh sh5; do
-	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-	   done;;
-       esac
-done
-IFS=$as_save_IFS
-
-
-      for as_shell in $as_candidate_shells $SHELL; do
-	 # Try only shells that exist, to save several forks.
-	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-		{ ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
-  CONFIG_SHELL=$as_shell
-	       as_have_required=yes
-	       if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
-  (exit $1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
+	   if ("$as_dir/$as_base" -c '
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
-  break
-fi
-
-fi
-
-      done
-
-      if test "x$CONFIG_SHELL" != x; then
-  for as_var in BASH_ENV ENV
-        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-        done
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
-    if test $as_have_required = no; then
-  echo This script requires a shell more modern than all the
-      echo shells that I found on your system.  Please install a
-      echo modern shell, or manually run the script under such a
-      echo shell if you do have one.
-      { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
-  echo No shell found that supports shell functions.
-  echo Please tell autoconf@gnu.org about your system,
-  echo including any error possibly output before this
-  echo message
-}
-
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
     sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
       N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
       t loop
-      s/-\n.*//
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
     ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
+  chmod +x $as_me.lineno ||
     { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
   # Exit status is that of the last command.
   exit
 }
 
 
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+if expr a : '\(a\)' >/dev/null 2>&1; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
     as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
+rm -f conf$$ conf$$.exe conf$$.file
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -518,28 +222,7 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-        test -d "$1/.";
-      else
-	case $1 in
-        -*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+as_executable_p="test -f"
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -548,27 +231,39 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
 
-exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
+exec 6>&1
+
 #
 # Initializations.
 #
 ac_default_prefix=/usr/local
-ac_clean_files=
 ac_config_libobj_dir=.
-LIBOBJS=
 cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
 SHELL=${CONFIG_SHELL-/bin/sh}
 
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete.  It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
 # Identity of this package.
 PACKAGE_NAME='libatomic_ops'
 PACKAGE_TARNAME='libatomic_ops'
@@ -580,149 +275,42 @@ ac_unique_file="src/atomic_ops.c"
 # Factoring default headers for most tests.
 ac_includes_default="\
 #include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
+#if HAVE_SYS_TYPES_H
 # include <sys/types.h>
 #endif
-#ifdef HAVE_SYS_STAT_H
+#if HAVE_SYS_STAT_H
 # include <sys/stat.h>
 #endif
-#ifdef STDC_HEADERS
+#if STDC_HEADERS
 # include <stdlib.h>
 # include <stddef.h>
 #else
-# ifdef HAVE_STDLIB_H
+# if HAVE_STDLIB_H
 #  include <stdlib.h>
 # endif
 #endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
 #  include <memory.h>
 # endif
 # include <string.h>
 #endif
-#ifdef HAVE_STRINGS_H
+#if HAVE_STRINGS_H
 # include <strings.h>
 #endif
-#ifdef HAVE_INTTYPES_H
+#if HAVE_INTTYPES_H
 # include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+#  include <stdint.h>
+# endif
 #endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
+#if HAVE_UNISTD_H
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-target
-target_cpu
-target_vendor
-target_os
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-CYGPATH_W
-PACKAGE
-VERSION
-ACLOCAL
-AUTOCONF
-AUTOMAKE
-AUTOHEADER
-MAKEINFO
-install_sh
-STRIP
-INSTALL_STRIP_PROGRAM
-mkdir_p
-AWK
-SET_MAKE
-am__leading_dot
-AMTAR
-am__tar
-am__untar
-RANLIB
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-DEPDIR
-am__include
-am__quote
-AMDEP_TRUE
-AMDEP_FALSE
-AMDEPBACKSLASH
-CCDEPMODE
-am__fastdepCC_TRUE
-am__fastdepCC_FALSE
-CCAS
-CCASFLAGS
-CPP
-GREP
-EGREP
-PICFLAG
-NEED_ASM_TRUE
-NEED_ASM_FALSE
-LIBOBJS
-LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CCAS CCASFLAGS CPP EGREP PICFLAG NEED_ASM_TRUE NEED_ASM_FALSE LIBOBJS LTLIBOBJS'
 ac_subst_files=''
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CCAS
-CCASFLAGS
-CPP'
-
 
 # Initialize some variables set by options.
 ac_init_help=
@@ -749,48 +337,34 @@ x_libraries=NONE
 # and all the variables that are supposed to be based on exec_prefix
 # by default will actually change.
 # Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
+datadir='${prefix}/share'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
 
 ac_prev=
-ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
+    eval "$ac_prev=\$ac_option"
     ac_prev=
     continue
   fi
 
-  case $ac_option in
-  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *)	ac_optarg=yes ;;
-  esac
+  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
+  case $ac_option in
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -812,45 +386,33 @@ do
   --config-cache | -C)
     cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad)
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
     datadir=$ac_optarg ;;
 
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
   -disable-* | --disable-*)
     ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    eval "enable_$ac_feature=no" ;;
 
   -enable-* | --enable-*)
     ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=\$ac_optarg ;;
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_$ac_feature='$ac_optarg'" ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -877,12 +439,6 @@ do
   -host=* | --host=* | --hos=* | --ho=*)
     host_alias=$ac_optarg ;;
 
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
@@ -907,16 +463,13 @@ do
   | --libexe=* | --libex=* | --libe=*)
     libexecdir=$ac_optarg ;;
 
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
     localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -981,16 +534,6 @@ do
   | --progr-tra=* | --program-tr=* | --program-t=*)
     program_transform_name=$ac_optarg ;;
 
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
@@ -1043,20 +586,24 @@ do
   -with-* | --with-*)
     ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=\$ac_optarg ;;
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_$ac_package='$ac_optarg'" ;;
 
   -without-* | --without-*)
     ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=no ;;
+    ac_package=`echo $ac_package | sed 's/-/_/g'`
+    eval "with_$ac_package=no" ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -1087,7 +634,8 @@ Try \`$0 --help' for more information." >&2
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
-    eval $ac_envvar=\$ac_optarg
+    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+    eval "$ac_envvar='$ac_optarg'"
     export $ac_envvar ;;
 
   *)
@@ -1107,19 +655,27 @@ if test -n "$ac_prev"; then
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute directory names.
-for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
-		datadir sysconfdir sharedstatedir localstatedir includedir \
-		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
 do
-  eval ac_val=\$$ac_var
+  eval ac_val=$`echo $ac_var`
   case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+	      localstatedir libdir includedir oldincludedir infodir mandir
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
   esac
-  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; }
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -1146,76 +702,82 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias-
 test "$silent" = yes && exec 6>/dev/null
 
 
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { echo "$as_me: error: Working directory cannot be determined" >&2
-   { (exit 1); exit 1; }; }
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { echo "$as_me: error: pwd does not report name of working directory" >&2
-   { (exit 1); exit 1; }; }
-
-
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$0" ||
+  # Try the directory containing this script, then its parent.
+  ac_confdir=`(dirname "$0") 2>/dev/null ||
 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$0" : 'X\(//\)[^/]' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
   srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
+  if test ! -r $srcdir/$ac_unique_file; then
     srcdir=..
   fi
 else
   ac_srcdir_defaulted=no
 fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
    { (exit 1); exit 1; }; }
+  else
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+  fi
 fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
    { (exit 1); exit 1; }; }
-	pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CCAS_set=${CCAS+set}
+ac_env_CCAS_value=$CCAS
+ac_cv_env_CCAS_set=${CCAS+set}
+ac_cv_env_CCAS_value=$CCAS
+ac_env_CCASFLAGS_set=${CCASFLAGS+set}
+ac_env_CCASFLAGS_value=$CCASFLAGS
+ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set}
+ac_cv_env_CCASFLAGS_value=$CCASFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
 
 #
 # Report the --help message.
@@ -1244,6 +806,9 @@ Configuration:
   -n, --no-create         do not create output files
       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
+_ACEOF
+
+  cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
 			  [$ac_default_prefix]
@@ -1261,22 +826,15 @@ Fine tuning of the installation directories:
   --bindir=DIR           user executables [EPREFIX/bin]
   --sbindir=DIR          system admin executables [EPREFIX/sbin]
   --libexecdir=DIR       program executables [EPREFIX/libexec]
+  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
   --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
   --libdir=DIR           object code libraries [EPREFIX/lib]
   --includedir=DIR       C header files [PREFIX/include]
   --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR          info documentation [DATAROOTDIR/info]
-  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/libatomic_ops]
-  --htmldir=DIR          html documentation [DOCDIR]
-  --dvidir=DIR           dvi documentation [DOCDIR]
-  --pdfdir=DIR           pdf documentation [DOCDIR]
-  --psdir=DIR            ps documentation [DOCDIR]
+  --infodir=DIR          info documentation [PREFIX/info]
+  --mandir=DIR           man documentation [PREFIX/man]
 _ACEOF
 
   cat <<\_ACEOF
@@ -1310,9 +868,8 @@ Some influential environment variables:
   CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
-  LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
+  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+              headers in a nonstandard directory <include dir>
   CCAS        assembler compiler command (defaults to CC)
   CCASFLAGS   assembler compiler flags (defaults to CFLAGS)
   CPP         C preprocessor
@@ -1321,86 +878,120 @@ Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
 _ACEOF
-ac_status=$?
 fi
 
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
+  ac_popdir=`pwd`
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" || continue
+    test -d $ac_dir || continue
     ac_builddir=.
 
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
+if test "$ac_dir" != .; then
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
 
 case $srcdir in
-  .)  # We are building in place.
+  .)  # No --srcdir option.  We are building in place.
     ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
 esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+    cd $ac_dir
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_srcdir/configure.gnu; then
+      echo
+      $SHELL $ac_srcdir/configure.gnu  --help=recursive
+    elif test -f $ac_srcdir/configure; then
+      echo
+      $SHELL $ac_srcdir/configure  --help=recursive
+    elif test -f $ac_srcdir/configure.ac ||
+	   test -f $ac_srcdir/configure.in; then
+      echo
+      $ac_configure --help
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
+    fi
+    cd $ac_popdir
   done
 fi
 
-test -n "$ac_init_help" && exit $ac_status
+test -n "$ac_init_help" && exit 0
 if $ac_init_version; then
   cat <<\_ACEOF
 libatomic_ops configure 1.2
-generated by GNU Autoconf 2.61
+generated by GNU Autoconf 2.59
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+Copyright (C) 2003 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
-  exit
+  exit 0
 fi
-cat >config.log <<_ACEOF
+exec 5>config.log
+cat >&5 <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by libatomic_ops $as_me 1.2, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+generated by GNU Autoconf 2.59.  Invocation command line was
 
   $ $0 $@
 
 _ACEOF
-exec 5>>config.log
 {
 cat <<_ASUNAME
 ## --------- ##
@@ -1419,7 +1010,7 @@ uname -v = `(uname -v) 2>/dev/null || echo unknown`
 /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
 /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
@@ -1433,7 +1024,6 @@ do
   test -z "$as_dir" && as_dir=.
   echo "PATH: $as_dir"
 done
-IFS=$as_save_IFS
 
 } >&5
 
@@ -1455,6 +1045,7 @@ _ACEOF
 ac_configure_args=
 ac_configure_args0=
 ac_configure_args1=
+ac_sep=
 ac_must_keep_next=false
 for ac_pass in 1 2
 do
@@ -1465,7 +1056,7 @@ do
     -q | -quiet | --quiet | --quie | --qui | --qu | --q \
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
-    *\'*)
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
       ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
@@ -1487,7 +1078,9 @@ do
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args '$ac_arg'"
+      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+      # Get rid of the leading space.
+      ac_sep=" "
       ;;
     esac
   done
@@ -1498,8 +1091,8 @@ $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
 # would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
 trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
@@ -1512,34 +1105,20 @@ trap 'exit_status=$?
 _ASBOX
     echo
     # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
+{
   (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
+    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
       sed -n \
-	"s/'\''/'\''\\\\'\'''\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
+	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+      ;;
     *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      sed -n \
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
       ;;
-    esac |
-    sort
-)
+    esac;
+}
     echo
 
     cat <<\_ASBOX
@@ -1550,28 +1129,22 @@ _ASBOX
     echo
     for ac_var in $ac_subst_vars
     do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      echo "$ac_var='\''$ac_val'\''"
+      eval ac_val=$`echo $ac_var`
+      echo "$ac_var='"'"'$ac_val'"'"'"
     done | sort
     echo
 
     if test -n "$ac_subst_files"; then
       cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
+## ------------- ##
+## Output files. ##
+## ------------- ##
 _ASBOX
       echo
       for ac_var in $ac_subst_files
       do
-	eval ac_val=\$$ac_var
-	case $ac_val in
-	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-	esac
-	echo "$ac_var='\''$ac_val'\''"
+	eval ac_val=$`echo $ac_var`
+	echo "$ac_var='"'"'$ac_val'"'"'"
       done | sort
       echo
     fi
@@ -1583,24 +1156,26 @@ _ASBOX
 ## ----------- ##
 _ASBOX
       echo
-      cat confdefs.h
+      sed "/^$/d" confdefs.h | sort
       echo
     fi
     test "$ac_signal" != 0 &&
       echo "$as_me: caught signal $ac_signal"
     echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+  rm -f core *.core &&
+  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
-' 0
+     ' 0
 for ac_signal in 1 2 13 15; do
   trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
 
 # Predefined preprocessor variables.
 
@@ -1631,17 +1206,14 @@ _ACEOF
 
 # Let the site file select an alternate cache file if it wants to.
 # Prefer explicitly selected file to automatically selected ones.
-if test -n "$CONFIG_SITE"; then
-  set x "$CONFIG_SITE"
-elif test "x$prefix" != xNONE; then
-  set x "$prefix/share/config.site" "$prefix/etc/config.site"
-else
-  set x "$ac_default_prefix/share/config.site" \
-	"$ac_default_prefix/etc/config.site"
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
 fi
-shift
-for ac_site_file
-do
+for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
     { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
 echo "$as_me: loading site script $ac_site_file" >&6;}
@@ -1657,8 +1229,8 @@ if test -r "$cache_file"; then
     { echo "$as_me:$LINENO: loading cache $cache_file" >&5
 echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
+      [\\/]* | ?:[\\/]* ) . $cache_file;;
+      *)                      . ./$cache_file;;
     esac
   fi
 else
@@ -1670,11 +1242,12 @@ fi
 # Check that the precious variables saved in the cache have kept the same
 # value.
 ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
+for ac_var in `(set) 2>&1 |
+	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
+  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+  eval ac_new_val="\$ac_env_${ac_var}_value"
   case $ac_old_set,$ac_new_set in
     set,)
       { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
@@ -1699,7 +1272,8 @@ echo "$as_me:   current value: $ac_new_val" >&2;}
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1716,6 +1290,12 @@ echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start ov
    { (exit 1); exit 1; }; }
 fi
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
 
 
 
@@ -1740,162 +1320,107 @@ fi
 
 
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  if test -f "$ac_dir/install-sh"; then
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
     break
-  elif test -f "$ac_dir/install.sh"; then
+  elif test -f $ac_dir/install.sh; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install.sh -c"
     break
-  elif test -f "$ac_dir/shtool"; then
+  elif test -f $ac_dir/shtool; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/shtool install -c"
     break
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
    { (exit 1); exit 1; }; }
 fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
 
 # Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
    { (exit 1); exit 1; }; }
 
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
 if test "${ac_cv_build+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
+  ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+  ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
   { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
 echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
    { (exit 1); exit 1; }; }
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
    { (exit 1); exit 1; }; }
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
-   { (exit 1); exit 1; }; };;
-esac
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
 build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
 if test "${ac_cv_host+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+  ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+  ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
    { (exit 1); exit 1; }; }
-fi
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-echo "$as_me: error: invalid value of canonical host" >&2;}
-   { (exit 1); exit 1; }; };;
-esac
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
 host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking target system type" >&5
-echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6
 if test "${ac_cv_target+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if test "x$target_alias" = x; then
-  ac_cv_target=$ac_cv_host
-else
-  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
-    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
+  ac_cv_target_alias=$target_alias
+test "x$ac_cv_target_alias" = "x" &&
+  ac_cv_target_alias=$ac_cv_host_alias
+ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
    { (exit 1); exit 1; }; }
-fi
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-echo "${ECHO_T}$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5
-echo "$as_me: error: invalid value of canonical target" >&2;}
-   { (exit 1); exit 1; }; };;
-esac
+echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6
 target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 
 
 # The aliases save the names the user supplied, while $host etc.
@@ -1919,8 +1444,8 @@ am__api_version="1.9"
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1942,7 +1467,7 @@ case $as_dir/ in
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -1961,22 +1486,21 @@ case $as_dir/ in
     ;;
 esac
 done
-IFS=$as_save_IFS
 
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
+    # removed, or if the path is relative.
     INSTALL=$ac_install_sh
   fi
 fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1986,8 +1510,8 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
 # Just in case
 sleep 1
 echo timestamp > conftest.file
@@ -2029,20 +1553,20 @@ echo "$as_me: error: newly created file is older than distributed files!
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
 test "$program_prefix" != NONE &&
-  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+  program_transform_name="s,^,$program_prefix,;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
 # Double any \ or $.  echo might interpret backslashes.
 # By default was `s,x,x', remove it if useless.
 cat <<\_ACEOF >conftest.sed
 s/[\\$]/&&/g;s/;s,x,x,$//
 _ACEOF
 program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
+rm conftest.sed
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
@@ -2094,8 +1618,8 @@ for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_AWK+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2108,57 +1632,54 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AWK="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6; }
+  echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
   test -n "$AWK" && break
 done
 
-{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
-set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
 all:
-	@echo '@@@%%%=$(MAKE)=@@@%%%'
+	@echo 'ac_maketemp="$(MAKE)"'
 _ACEOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
-  *@@@%%%=?*=@@@%%%*)
-    eval ac_cv_prog_make_${ac_make}_set=yes;;
-  *)
-    eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
 rm -f conftest.make
 fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
   SET_MAKE=
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -2229,8 +1750,8 @@ if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2243,34 +1764,32 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  { echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6; }
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
 fi
 if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2283,41 +1802,27 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6; }
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
+  STRIP=$ac_ct_STRIP
 else
   STRIP="$ac_cv_prog_STRIP"
 fi
@@ -2340,8 +1845,8 @@ am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2354,34 +1859,32 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
 fi
 fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  { echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6; }
+  echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
 fi
 if test -z "$ac_cv_prog_RANLIB"; then
   ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2394,50 +1897,101 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
+  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
 fi
 fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
+  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
+  RANLIB=$ac_ct_RANLIB
 else
   RANLIB="$ac_cv_prog_RANLIB"
 fi
 
 
-ac_config_headers="$ac_config_headers src/config.h"
+          ac_config_headers="$ac_config_headers src/config.h"
 
 
 # Checks for programs.
+DEPDIR="${am__leading_dot}deps"
+
+          ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+  enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2446,8 +2000,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2460,34 +2014,32 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
 fi
 if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2500,51 +2052,36 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
+  CC=$ac_ct_CC
 else
   CC="$ac_cv_prog_CC"
 fi
 
 if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2557,34 +2094,74 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
   fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
 fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2598,7 +2175,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -2609,7 +2186,6 @@ do
   fi
 done
 done
-IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -2627,23 +2203,22 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
 fi
 if test -z "$CC"; then
   if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
+  for ac_prog in cl
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2656,38 +2231,36 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
     test -n "$CC" && break
   done
 fi
 if test -z "$CC"; then
   ac_ct_CC=$CC
-  for ac_prog in cl.exe
+  for ac_prog in cl
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2700,45 +2273,29 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
-IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
 else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
 fi
 
-
   test -n "$ac_ct_CC" && break
 done
 
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
+  CC=$ac_ct_CC
 fi
 
 fi
@@ -2751,35 +2308,21 @@ See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
+echo "$as_me:$LINENO:" \
+     "checking for C compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
@@ -2804,77 +2347,47 @@ ac_clean_files="$ac_clean_files a.out a.exe b.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort.  b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions.  Remove them first so a
-# subsequent execution test works.
-ac_rmfiles=
-for ac_file in $ac_files
-do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-  esac
-done
-rm -f $ac_rmfiles
-
-if { (ac_try="$ac_link_default"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link_default") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+  (eval $ac_link_default) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
+  # Find the output, starting from the most likely.  This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
 do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+	;;
+    conftest.$ac_ext )
+	# This is the source file.
 	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
 	# certainly right.
 	break;;
     *.* )
-        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-	then :; else
-	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	fi
-	# We set ac_cv_exeext here because the later test for it is not
-	# safe: cross compilers may not add the suffix if given an `-o'
-	# argument, so we may need to know it at that point already.
-	# Even if this section looks crufty: it has the advantage of
-	# actually working.
+	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	# FIXME: I believe we export ac_cv_exeext for Libtool,
+	# but it would be cool to find out if it's true.  Does anybody
+	# maintain Libtool? --akim.
+	export ac_cv_exeext
 	break;;
     * )
 	break;;
   esac
 done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
 else
-  ac_file=''
-fi
-
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
-if test -z "$ac_file"; then
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
@@ -2886,21 +2399,19 @@ See \`config.log' for more details." >&2;}
 fi
 
 ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
 
-# Check that the compiler produces executables we can run.  If not, either
+# Check the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -2919,27 +2430,22 @@ See \`config.log' for more details." >&2;}
     fi
   fi
 fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
 
 rm -f a.out a.exe conftest$ac_cv_exeext b.out
 ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run.  If not, either
+# Check the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
-
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
@@ -2950,8 +2456,9 @@ eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  export ac_cv_exeext
 	  break;;
     * ) break;;
   esac
@@ -2965,14 +2472,14 @@ See \`config.log' for more details." >&2;}
 fi
 
 rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
 if test "${ac_cv_objext+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2992,20 +2499,14 @@ main ()
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  for ac_file in conftest.o conftest.obj conftest.*; do
-  test -f "$ac_file" || continue;
+  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
@@ -3023,12 +2524,12 @@ fi
 
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3051,49 +2552,50 @@ main ()
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   ac_compiler_gnu=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_compiler_gnu=no
+ac_compiler_gnu=no
 fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
 GCC=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
 if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
+  cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -3109,118 +2611,38 @@ main ()
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	CFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_c_werror_flag=$ac_save_c_werror_flag
-	 CFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  (exit $ac_status); }; }; then
   ac_cv_prog_cc_g=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-
+ac_cv_prog_cc_g=no
 fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -3236,12 +2658,12 @@ else
     CFLAGS=
   fi
 fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_prog_cc_c89=no
+  ac_cv_prog_cc_stdc=no
 ac_save_CC=$CC
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -3275,17 +2697,12 @@ static char *f (char * (*g) (char **, int), char **p, ...)
 /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
    function prototypes and stuff, but not '\xHH' hex character constants.
    These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
+   as 'x'.  The following induces an error, until -std1 is added to get
    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
    array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
+   that's true only with -std1.  */
 int osf4_cc_array ['\x00' == 0 ? 1 : -1];
 
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -3300,132 +2717,215 @@ return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
   return 0;
 }
 _ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX			-qlanglvl=ansi
+# Ultrix and OSF/1	-std1
+# HP-UX 10.20 and later	-Ae
+# HP-UX older versions	-Aa -D_HPUX_SOURCE
+# SVR4			-Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
   rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_cc_c89=$ac_arg
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_stdc=$ac_arg
+break
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-
 fi
-
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
+rm -f conftest.err conftest.$ac_objext
 done
-rm -f conftest.$ac_ext
+rm -f conftest.$ac_ext conftest.$ac_objext
 CC=$ac_save_CC
 
 fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
-  xno)
-    { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
+
+case "x$ac_cv_prog_cc_stdc" in
+  x|xno)
+    echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
   *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+    CC="$CC $ac_cv_prog_cc_stdc" ;;
 esac
 
+# Some people use a C++ compiler to compile C.  Since we use `exit',
+# in C++ we need to declare it.  In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+  choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  for ac_declaration in \
+   '' \
+   'extern "C" void std::exit (int) throw (); using std::exit;' \
+   'extern "C" void std::exit (int); using std::exit;' \
+   'extern "C" void exit (int) throw ();' \
+   'extern "C" void exit (int);' \
+   'void exit (int);'
+do
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+continue
 fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-
-{ echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
-  enableval=$enable_dependency_tracking;
 fi
-
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+  echo '#ifdef __cplusplus' >>confdefs.h
+  echo $ac_declaration      >>confdefs.h
+  echo '#endif'             >>confdefs.h
 fi
 
-
-if test "x$enable_dependency_tracking" != xno; then
-  AMDEP_TRUE=
-  AMDEP_FALSE='#'
 else
-  AMDEP_TRUE='#'
-  AMDEP_FALSE=
-fi
-
-
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 depcc="$CC"   am_compiler_list=
 
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3514,8 +3014,8 @@ else
 fi
 
 fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
 
@@ -3531,6 +3031,109 @@ else
 fi
 
 
+if test "x$CC" != xcc; then
+  echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
+echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6
+else
+  echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
+echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6
+fi
+set dummy $CC; ac_cc=`echo $2 |
+		      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest.$ac_objext >&5'
+if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+   test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); };
+then
+  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+  if test "x$CC" != xcc; then
+    # Test first that cc exists at all.
+    if { ac_try='cc -c conftest.$ac_ext >&5'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+      ac_try='cc -c conftest.$ac_ext -o conftest.$ac_objext >&5'
+      if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); };
+      then
+	# cc works too.
+	:
+      else
+	# cc exists but doesn't like -o.
+	eval ac_cv_prog_cc_${ac_cc}_c_o=no
+      fi
+    fi
+  fi
+else
+  eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f conftest*
+
+fi
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+
+cat >>confdefs.h <<\_ACEOF
+#define NO_MINUS_C_MINUS_O 1
+_ACEOF
+
+fi
+
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+
 # By default we simply use the C compiler to build assembly code.
 
 test "${CCAS+set}" = set || CCAS=$CC
@@ -3546,8 +3149,8 @@ ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -3581,22 +3184,24 @@ cat >>conftest.$ac_ext <<_ACEOF
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
   :
 else
   echo "$as_me: failed program was:" >&5
@@ -3605,10 +3210,9 @@ sed 's/^/| /' conftest.$ac_ext >&5
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether nonexistent headers
+  # OK, works on sane cases.  Now check whether non-existent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -3618,22 +3222,24 @@ cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
   # Broken: success on invalid input.
 continue
 else
@@ -3644,7 +3250,6 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -3662,8 +3267,8 @@ fi
 else
   ac_cv_prog_CPP=$CPP
 fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
 do
@@ -3686,22 +3291,24 @@ cat >>conftest.$ac_ext <<_ACEOF
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
   :
 else
   echo "$as_me: failed program was:" >&5
@@ -3710,10 +3317,9 @@ sed 's/^/| /' conftest.$ac_ext >&5
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether nonexistent headers
+  # OK, works on sane cases.  Now check whether non-existent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -3723,22 +3329,24 @@ cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
   # Broken: success on invalid input.
 continue
 else
@@ -3749,7 +3357,6 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -3772,170 +3379,23 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
-if test "${ac_cv_path_GREP+set}" = set; then
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in grep ggrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-    # Check for GNU ac_path_GREP and select it if it is found.
-  # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
-  ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    echo 'GREP' >> "conftest.nl"
-    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_path_GREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_GREP="$ac_path_GREP"
-      ac_path_GREP_max=$ac_count
+  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
     fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
-    $ac_path_GREP_found && break 3
-  done
-done
-
-done
-IFS=$as_save_IFS
-
-
 fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
 
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
-fi
 
-else
-  ac_cv_path_GREP=$GREP
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-   then ac_cv_path_EGREP="$GREP -E"
-   else
-     # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in egrep; do
-  for ac_exec_ext in '' $ac_executable_extensions; do
-    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-    { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-    # Check for GNU ac_path_EGREP and select it if it is found.
-  # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
-  ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    echo 'EGREP' >> "conftest.nl"
-    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_EGREP="$ac_path_EGREP"
-      ac_path_EGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
-    $ac_path_EGREP_found && break 3
-  done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-else
-  ac_cv_path_EGREP=$EGREP
-fi
-
-
-   fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
 if test "${ac_cv_header_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3959,31 +3419,35 @@ main ()
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   ac_cv_header_stdc=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_header_stdc=no
+ac_cv_header_stdc=no
 fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
@@ -4039,7 +3503,6 @@ cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ctype.h>
-#include <stdlib.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -4059,27 +3522,18 @@ main ()
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
 	|| toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
+      exit(2);
+  exit (0);
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4092,14 +3546,12 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
-
-
 fi
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
 if test $ac_cv_header_stdc = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -4122,9 +3574,9 @@ for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
 		  inttypes.h stdint.h unistd.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -4138,35 +3590,38 @@ $ac_includes_default
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   eval "$as_ac_Header=yes"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	eval "$as_ac_Header=no"
+eval "$as_ac_Header=no"
 fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
@@ -4182,19 +3637,18 @@ done
 for ac_header in stdlib.h unistd.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
 else
   # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -4205,37 +3659,41 @@ $ac_includes_default
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   ac_header_compiler=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_header_compiler=no
+ac_header_compiler=no
 fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
 
 # Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -4244,22 +3702,24 @@ cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
   ac_header_preproc=yes
 else
   echo "$as_me: failed program was:" >&5
@@ -4267,10 +3727,9 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
   ac_header_preproc=no
 fi
-
 rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
 
 # So?  What about this header?
 case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
@@ -4294,19 +3753,25 @@ echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\
 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-
+    (
+      cat <<\_ASBOX
+## ---------------------------------------- ##
+## Report this to the libatomic_ops lists.  ##
+## ---------------------------------------- ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
     ;;
 esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   eval "$as_ac_Header=\$ac_header_preproc"
 fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
 
 fi
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
@@ -4322,9 +3787,9 @@ done
 for ac_func in getpagesize
 do
 as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -4350,60 +3815,68 @@ cat >>conftest.$ac_ext <<_ACEOF
 
 #undef $ac_func
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
+/* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
+{
 #endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
 char $ac_func ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
 #endif
 
 int
 main ()
 {
-return $ac_func ();
+return f != $ac_func;
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext &&
-       $as_test_x conftest$ac_exeext; then
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   eval "$as_ac_var=yes"
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	eval "$as_ac_var=no"
+eval "$as_ac_var=no"
 fi
-
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+rm -f conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 fi
-ac_res=`eval echo '${'$as_ac_var'}'`
-	       { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
 if test `eval echo '${'$as_ac_var'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
@@ -4412,8 +3885,8 @@ _ACEOF
 fi
 done
 
-{ echo "$as_me:$LINENO: checking for working mmap" >&5
-echo $ECHO_N "checking for working mmap... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for working mmap" >&5
+echo $ECHO_N "checking for working mmap... $ECHO_C" >&6
 if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4455,21 +3928,21 @@ $ac_includes_default
 #include <fcntl.h>
 #include <sys/mman.h>
 
-#if !defined STDC_HEADERS && !defined HAVE_STDLIB_H
+#if !STDC_HEADERS && !HAVE_STDLIB_H
 char *malloc ();
 #endif
 
 /* This mess was copied from the GNU getpagesize.h.  */
-#ifndef HAVE_GETPAGESIZE
+#if !HAVE_GETPAGESIZE
 /* Assume that all systems that can run configure have sys/param.h.  */
-# ifndef HAVE_SYS_PARAM_H
+# if !HAVE_SYS_PARAM_H
 #  define HAVE_SYS_PARAM_H 1
 # endif
 
 # ifdef _SC_PAGESIZE
 #  define getpagesize() sysconf(_SC_PAGESIZE)
 # else /* no _SC_PAGESIZE */
-#  ifdef HAVE_SYS_PARAM_H
+#  if HAVE_SYS_PARAM_H
 #   include <sys/param.h>
 #   ifdef EXEC_PAGESIZE
 #    define getpagesize() EXEC_PAGESIZE
@@ -4508,15 +3981,15 @@ main ()
   /* First, make a file with some known garbage in it. */
   data = (char *) malloc (pagesize);
   if (!data)
-    return 1;
+    exit (1);
   for (i = 0; i < pagesize; ++i)
     *(data + i) = rand ();
   umask (0);
   fd = creat ("conftest.mmap", 0600);
   if (fd < 0)
-    return 1;
+    exit (1);
   if (write (fd, data, pagesize) != pagesize)
-    return 1;
+    exit (1);
   close (fd);
 
   /* Next, try to mmap the file at a fixed address which already has
@@ -4524,17 +3997,17 @@ main ()
      we see the same garbage.  */
   fd = open ("conftest.mmap", O_RDWR);
   if (fd < 0)
-    return 1;
+    exit (1);
   data2 = (char *) malloc (2 * pagesize);
   if (!data2)
-    return 1;
-  data2 += (pagesize - ((long int) data2 & (pagesize - 1))) & (pagesize - 1);
+    exit (1);
+  data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1);
   if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
 		     MAP_PRIVATE | MAP_FIXED, fd, 0L))
-    return 1;
+    exit (1);
   for (i = 0; i < pagesize; ++i)
     if (*(data + i) != *(data2 + i))
-      return 1;
+      exit (1);
 
   /* Finally, make sure that changes to the mapped area do not
      percolate back to the file as seen by read().  (This is a bug on
@@ -4543,33 +4016,24 @@ main ()
     *(data2 + i) = *(data2 + i) + 1;
   data3 = (char *) malloc (pagesize);
   if (!data3)
-    return 1;
+    exit (1);
   if (read (fd, data3, pagesize) != pagesize)
-    return 1;
+    exit (1);
   for (i = 0; i < pagesize; ++i)
     if (*(data + i) != *(data3 + i))
-      return 1;
+      exit (1);
   close (fd);
-  return 0;
+  exit (0);
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4582,13 +4046,11 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_func_mmap_fixed_mapped=no
 fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
-
-
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5
-echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5
+echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6
 if test $ac_cv_func_mmap_fixed_mapped = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -4600,8 +4062,8 @@ rm -f conftest.mmap
 
 
 # Checks for header files.
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
 if test "${ac_cv_header_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4625,31 +4087,35 @@ main ()
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
   ac_cv_header_stdc=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_header_stdc=no
+ac_cv_header_stdc=no
 fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
@@ -4705,7 +4171,6 @@ cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ctype.h>
-#include <stdlib.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -4725,27 +4190,18 @@ main ()
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
 	|| toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
+      exit(2);
+  exit (0);
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_link") 2>&5
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_try") 2>&5
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4758,14 +4214,12 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
-
-
 fi
 fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
 if test $ac_cv_header_stdc = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -4779,25 +4233,25 @@ fi
 # Determine PIC flag, adjust default CFLAGS
 need_asm=false
 PICFLAG=
-{ echo "$as_me:$LINENO: checking Determining PIC compiler flag" >&5
-echo $ECHO_N "checking Determining PIC compiler flag... $ECHO_C" >&6; }
+echo "$as_me:$LINENO: checking Determining PIC compiler flag" >&5
+echo $ECHO_N "checking Determining PIC compiler flag... $ECHO_C" >&6
 if test "$GCC" = yes; then
-  { echo "$as_me:$LINENO: result: -fPIC" >&5
-echo "${ECHO_T}-fPIC" >&6; }
+  echo "$as_me:$LINENO: result: -fPIC" >&5
+echo "${ECHO_T}-fPIC" >&6
   PICFLAG=-fPIC
 else
   case "$host" in
     *-*-hpux*)
-      { echo "$as_me:$LINENO: result: \"+Z\"" >&5
-echo "${ECHO_T}\"+Z\"" >&6; }
+      echo "$as_me:$LINENO: result: \"+Z\"" >&5
+echo "${ECHO_T}\"+Z\"" >&6
       PICFLAG="+Z"
       if test "$GCC" != yes; then
         CFLAGS="$CFLAGS +O2 -mt"
       fi
       ;;
     *-*-solaris*)
-      { echo "$as_me:$LINENO: result: -Kpic" >&5
-echo "${ECHO_T}-Kpic" >&6; }
+      echo "$as_me:$LINENO: result: -Kpic" >&5
+echo "${ECHO_T}-Kpic" >&6
       PICFLAG=-Kpic
       if test "$GCC" != yes; then
         CFLAGS="$CFLAGS -O"
@@ -4805,14 +4259,14 @@ echo "${ECHO_T}-Kpic" >&6; }
       fi
       ;;
     *-*-linux*)
-      { echo "$as_me:$LINENO: result: -fPIC" >&5
-echo "${ECHO_T}-fPIC" >&6; }
+      echo "$as_me:$LINENO: result: -fPIC" >&5
+echo "${ECHO_T}-fPIC" >&6
       PICFLAG=-fPIC
       # Any Linux compiler had better be gcc compatible.
       ;;
     *)
-      { echo "$as_me:$LINENO: result: \"<none>\"" >&5
-echo "${ECHO_T}\"<none>\"" >&6; }
+      echo "$as_me:$LINENO: result: \"<none>\"" >&5
+echo "${ECHO_T}\"<none>\"" >&6
       ;;
   esac
 fi
@@ -4832,9 +4286,9 @@ else
 fi
 
 
-ac_config_files="$ac_config_files Makefile src/Makefile src/atomic_ops/Makefile src/atomic_ops/sysdeps/Makefile doc/Makefile tests/Makefile"
+                                                            ac_config_files="$ac_config_files Makefile src/Makefile src/atomic_ops/Makefile src/atomic_ops/sysdeps/Makefile doc/Makefile tests/Makefile"
 
-ac_config_commands="$ac_config_commands default"
+          ac_config_commands="$ac_config_commands default"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -4854,58 +4308,39 @@ _ACEOF
 
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
+# So, don't put newlines in cache variables' values.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
-
+{
   (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
+    case `(ac_space=' '; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
       # `set' does not quote correctly, so add quotes (double-quote
       # substitution turns \\\\ into \\, and sed turns \\ into \).
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
+      ;;
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      sed -n \
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
       ;;
-    esac |
-    sort
-) |
+    esac;
+} |
   sed '
-     /^ac_cv_env_/b end
      t clear
-     :clear
+     : clear
      s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
      t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
-      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
+     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+  if test -w $cache_file; then
+    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
     cat confcache >$cache_file
   else
-    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+    echo "not updating unwritable cache $cache_file"
   fi
 fi
 rm -f confcache
@@ -4914,18 +4349,32 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[	 ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[	 ]*$//;
+}'
+fi
+
 DEFS=-DHAVE_CONFIG_H
 
 ac_libobjs=
 ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+  ac_i=`echo "$ac_i" |
+	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+  # 2. Add them.
+  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -4977,45 +4426,17 @@ cat >>$CONFIG_STATUS <<\_ACEOF
 ## M4sh Initialization.  ##
 ## --------------------- ##
 
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
+# Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
 fi
+DUALCASE=1; export DUALCASE # for MKS sh
 
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
@@ -5025,43 +4446,8 @@ else
 fi
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
-
 # Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
+$as_unset ENV MAIL MAILPATH
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -5075,19 +4461,18 @@ do
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+    $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+if expr a : '\(a\)' >/dev/null 2>&1; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -5095,120 +4480,159 @@ fi
 
 
 # Name of the executable.
-as_me=`$as_basename -- "$0" ||
+as_me=`$as_basename "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
 
-# CDPATH.
-$as_unset CDPATH
 
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
 
 
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
     sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
       N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
       t loop
-      s/-\n.*//
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
     ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+  chmod +x $as_me.lineno ||
+    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
   # Exit status is that of the last command.
   exit
 }
 
 
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+if expr a : '\(a\)' >/dev/null 2>&1; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
     as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
+rm -f conf$$ conf$$.exe conf$$.file
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -5217,28 +4641,7 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-        test -d "$1/.";
-      else
-	case $1 in
-        -*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+as_executable_p="test -f"
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -5247,14 +4650,31 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
 exec 6>&1
 
-# Save the log message, to keep $[0] and so on meaningful, and to
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
+# values after options handling.  Logging --version etc. is OK.
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
 This file was extended by libatomic_ops $as_me 1.2, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
+generated by GNU Autoconf 2.59.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -5262,20 +4682,30 @@ generated by GNU Autoconf 2.61.  Invocation command line was
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
 _ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
 # Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
+if test -n "$ac_config_files"; then
+  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
 
-_ACEOF
+if test -n "$ac_config_headers"; then
+  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
 
 cat >>$CONFIG_STATUS <<\_ACEOF
+
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
@@ -5283,7 +4713,7 @@ current configuration.
 Usage: $0 [OPTIONS] [FILE]...
 
   -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
+  -V, --version    print version number, then exit
   -q, --quiet      do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
@@ -5302,21 +4732,19 @@ Configuration commands:
 $config_commands
 
 Report bugs to <bug-autoconf@gnu.org>."
-
 _ACEOF
+
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
 libatomic_ops config.status 1.2
-configured by $0, generated by GNU Autoconf 2.61,
-  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.59,
+  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2003 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
+srcdir=$srcdir
+INSTALL="$INSTALL"
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
@@ -5327,24 +4755,39 @@ while test $# != 0
 do
   case $1 in
   --*=*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_option=`expr "x$1" : 'x\([^=]*\)='`
+    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
     ac_shift=:
     ;;
-  *)
+  -*)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
+  *) # This is not an option, so the user has probably given explicit
+     # arguments.
+     ac_option=$1
+     ac_need_defaults=false;;
   esac
 
   case $ac_option in
   # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    echo "$ac_cs_version"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
+  --version | --vers* | -V )
+    echo "$ac_cs_version"; exit 0 ;;
+  --he | --h)
+    # Conflict between --help and --header
+    { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit 0 ;;
+  --debug | --d* | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
@@ -5354,24 +4797,18 @@ do
     $ac_shift
     CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
     ac_need_defaults=false;;
-  --he | --h)
-    # Conflict between --help and --header
-    { echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
+  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
    { (exit 1); exit 1; }; } ;;
 
-  *) ac_config_targets="$ac_config_targets $1"
-     ac_need_defaults=false ;;
+  *) ac_config_targets="$ac_config_targets $1" ;;
 
   esac
   shift
@@ -5387,28 +4824,17 @@ fi
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 if \$ac_cs_recheck; then
-  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  CONFIG_SHELL=$SHELL
-  export CONFIG_SHELL
-  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  echo "$ac_log"
-} >&5
 
-_ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 #
-# INIT-COMMANDS
+# INIT-COMMANDS section.
 #
+
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 PICFLAG=${PICFLAG}
 CC=${CC}
@@ -5416,29 +4842,28 @@ DEFS=${DEFS}
 
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
 
-# Handling of arguments.
+
+cat >>$CONFIG_STATUS <<\_ACEOF
 for ac_config_target in $ac_config_targets
 do
-  case $ac_config_target in
-    "src/config.h") CONFIG_HEADERS="$CONFIG_HEADERS src/config.h" ;;
-    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-    "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-    "src/atomic_ops/Makefile") CONFIG_FILES="$CONFIG_FILES src/atomic_ops/Makefile" ;;
-    "src/atomic_ops/sysdeps/Makefile") CONFIG_FILES="$CONFIG_FILES src/atomic_ops/sysdeps/Makefile" ;;
-    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
-    "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
-    "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
-
+  case "$ac_config_target" in
+  # Handling of arguments.
+  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+  "src/atomic_ops/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/atomic_ops/Makefile" ;;
+  "src/atomic_ops/sysdeps/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/atomic_ops/sysdeps/Makefile" ;;
+  "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+  "tests/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
+  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+  "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+  "src/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/config.h" ;;
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
 
-
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
@@ -5450,409 +4875,345 @@ if $ac_need_defaults; then
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
+# simply because there is no reason to put it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
+# Create a temporary directory, and hook for its removal unless debugging.
 $debug ||
 {
-  tmp=
-  trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
   trap '{ (exit 1); exit 1; }' 1 2 13 15
 }
+
 # Create a (secure) tmp directory for tmp files.
 
 {
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
+  tmp=./confstat$$-$RANDOM
+  (umask 077 && mkdir $tmp)
 } ||
 {
    echo "$me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
 #
-# Set up the sed scripts for CONFIG_FILES section.
+# CONFIG_FILES section.
 #
 
 # No need to generate the scripts if there are no CONFIG_FILES.
 # This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
+if test -n "\$CONFIG_FILES"; then
+  # Protect against being on the right side of a sed subst in config.status.
+  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@target@,$target,;t t
+s,@target_cpu@,$target_cpu,;t t
+s,@target_vendor@,$target_vendor,;t t
+s,@target_os@,$target_os,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@mkdir_p@,$mkdir_p,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@am__tar@,$am__tar,;t t
+s,@am__untar@,$am__untar,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@CCAS@,$CCAS,;t t
+s,@CCASFLAGS@,$CCASFLAGS,;t t
+s,@CPP@,$CPP,;t t
+s,@EGREP@,$EGREP,;t t
+s,@PICFLAG@,$PICFLAG,;t t
+s,@NEED_ASM_TRUE@,$NEED_ASM_TRUE,;t t
+s,@NEED_ASM_FALSE@,$NEED_ASM_FALSE,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
 
 _ACEOF
 
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-host!$host$ac_delim
-host_cpu!$host_cpu$ac_delim
-host_vendor!$host_vendor$ac_delim
-host_os!$host_os$ac_delim
-target!$target$ac_delim
-target_cpu!$target_cpu$ac_delim
-target_vendor!$target_vendor$ac_delim
-target_os!$target_os$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-CYGPATH_W!$CYGPATH_W$ac_delim
-PACKAGE!$PACKAGE$ac_delim
-VERSION!$VERSION$ac_delim
-ACLOCAL!$ACLOCAL$ac_delim
-AUTOCONF!$AUTOCONF$ac_delim
-AUTOMAKE!$AUTOMAKE$ac_delim
-AUTOHEADER!$AUTOHEADER$ac_delim
-MAKEINFO!$MAKEINFO$ac_delim
-install_sh!$install_sh$ac_delim
-STRIP!$STRIP$ac_delim
-INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
-mkdir_p!$mkdir_p$ac_delim
-AWK!$AWK$ac_delim
-SET_MAKE!$SET_MAKE$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-AMTAR!$AMTAR$ac_delim
-am__tar!$am__tar$ac_delim
-am__untar!$am__untar$ac_delim
-RANLIB!$RANLIB$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-DEPDIR!$DEPDIR$ac_delim
-am__include!$am__include$ac_delim
-am__quote!$am__quote$ac_delim
-AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-CCDEPMODE!$CCDEPMODE$ac_delim
-am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-CCAS!$CCAS$ac_delim
-CCASFLAGS!$CCASFLAGS$ac_delim
-CPP!$CPP$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-PICFLAG!$PICFLAG$ac_delim
-NEED_ASM_TRUE!$NEED_ASM_TRUE$ac_delim
-NEED_ASM_FALSE!$NEED_ASM_FALSE$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
-
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
-    break
-  elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  cat >>$CONFIG_STATUS <<\_ACEOF
+  # Split the substitutions into bite-sized pieces for seds with
+  # small command number limits, like on Digital OSF/1 and HP-UX.
+  ac_max_sed_lines=48
+  ac_sed_frag=1 # Number of current file.
+  ac_beg=1 # First line for current file.
+  ac_end=$ac_max_sed_lines # Line after last line for current file.
+  ac_more_lines=:
+  ac_sed_cmds=
+  while $ac_more_lines; do
+    if test $ac_beg -gt 1; then
+      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    else
+      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    fi
+    if test ! -s $tmp/subs.frag; then
+      ac_more_lines=false
+    else
+      # The purpose of the label and of the branching condition is to
+      # speed up the sed processing (if there are no `@' at all, there
+      # is no need to browse any of the substitutions).
+      # These are the two extra sed commands mentioned above.
+      (echo ':t
+  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+      if test -z "$ac_sed_cmds"; then
+	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+      else
+	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+      fi
+      ac_sed_frag=`expr $ac_sed_frag + 1`
+      ac_beg=$ac_end
+      ac_end=`expr $ac_end + $ac_max_sed_lines`
+    fi
+  done
+  if test -z "$ac_sed_cmds"; then
+    ac_sed_cmds=cat
   fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
+fi # test -n "$CONFIG_FILES"
 
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
 _ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-CEOF$ac_eof
-_ACEOF
-
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[	 ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[	 ]*$//
-}'
-fi
-
 cat >>$CONFIG_STATUS <<\_ACEOF
-fi # test -n "$CONFIG_FILES"
-
-
-for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-   { (exit 1); exit 1; }; };;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
-	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-	 # because $ac_f cannot contain `:'.
-	 test -f "$ac_f" ||
-	   case $ac_f in
-	   [\\/$]*) false;;
-	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-	   esac ||
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-   { (exit 1); exit 1; }; };;
-      esac
-      ac_file_inputs="$ac_file_inputs $ac_f"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input="Generated from "`IFS=:
-	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    fi
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin";;
-    esac
-    ;;
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+	cat >$tmp/stdin
+	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
   esac
 
-  ac_dir=`$as_dirname -- "$ac_file" ||
+  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$ac_file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  { as_dir="$ac_dir"
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
     as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
     done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
    { (exit 1); exit 1; }; }; }
+
   ac_builddir=.
 
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
+if test "$ac_dir" != .; then
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
 
 case $srcdir in
-  .)  # We are building in place.
+  .)  # No --srcdir option.  We are building in place.
     ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
 esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
 
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
 
   case $INSTALL in
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
   esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
 
-case `sed -n '/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-    s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    configure_input=
+  else
+    configure_input="$ac_file.  "
+  fi
+  configure_input=$configure_input"Generated from `echo $ac_file_in |
+				     sed 's,.*/,,'` by configure."
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+	 # Absolute (can't be DOS-style, as IFS=:)
+	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 echo "$f";;
+      *) # Relative
+	 if test -f "$f"; then
+	   # Build tree
+	   echo "$f"
+	 elif test -f "$srcdir/$f"; then
+	   # Source tree
+	   echo "$srcdir/$f"
+	 else
+	   # /dev/null tree
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 fi;;
+      esac
+    done` || { (exit 1); exit 1; }
 _ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
 cat >>$CONFIG_STATUS <<_ACEOF
   sed "$ac_vpsub
 $extrasub
@@ -5860,130 +5221,248 @@ _ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed 's/|#_!!_#|//g' >$tmp/out
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&2;}
-
-  rm -f "$tmp/stdin"
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+  rm -f $tmp/stdin
+  if test x"$ac_file" != x-; then
+    mv $tmp/out $ac_file
+  else
+    cat $tmp/out
+    rm -f $tmp/out
+  fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
+ac_dB='[	 ].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
   case $ac_file in
-  -) cat "$tmp/out"; rm -f "$tmp/out";;
-  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+  - | *:- | *:-:* ) # input from stdin
+	cat >$tmp/stdin
+	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
   esac
- ;;
-  :H)
-  #
-  # CONFIG_HEADER
-  #
+
+  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+	 # Absolute (can't be DOS-style, as IFS=:)
+	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 # Do quote $f, to prevent DOS paths from being IFS'd.
+	 echo "$f";;
+      *) # Relative
+	 if test -f "$f"; then
+	   # Build tree
+	   echo "$f"
+	 elif test -f "$srcdir/$f"; then
+	   # Source tree
+	   echo "$srcdir/$f"
+	 else
+	   # /dev/null tree
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+  # Remove the trailing spaces.
+  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
+
 _ACEOF
 
-# Transform confdefs.h into a sed script `conftest.defines', that
-# substitutes the proper values into config.h.in to produce config.h.
-rm -f conftest.defines conftest.tail
-# First, append a space to every undef/define line, to ease matching.
-echo 's/$/ /' >conftest.defines
-# Then, protect against being on the right side of a sed subst, or in
-# an unquoted here document, in config.status.  If some macros were
-# called several times there might be several #defines for the same
-# symbol, which is useless.  But do not sort them, since the last
-# AC_DEFINE must be honored.
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
-# NAME is the cpp macro being defined, VALUE is the value it is being given.
-# PARAMS is the parameter list in the macro definition--in most cases, it's
-# just an empty string.
-ac_dA='s,^\\([	 #]*\\)[^	 ]*\\([	 ]*'
-ac_dB='\\)[	 (].*,\\1define\\2'
-ac_dC=' '
-ac_dD=' ,'
-
-uniq confdefs.h |
-  sed -n '
-	t rset
-	:rset
-	s/^[	 ]*#[	 ]*define[	 ][	 ]*//
-	t ok
-	d
-	:ok
-	s/[\\&,]/\\&/g
-	s/^\('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
-	s/^\('"$ac_word_re"'\)[	 ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
-  ' >>conftest.defines
-
-# Remove the space that was appended to ease matching.
-# Then replace #undef with comments.  This is necessary, for
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h.  The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status.  Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless.  Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
+
+# This sed command replaces #undef with comments.  This is necessary, for
 # example, in the case of _POSIX_SOURCE, which is predefined and required
 # on some systems where configure will not decide to define it.
-# (The regexp can be short, since the line contains either #define or #undef.)
-echo 's/ $//
-s,^[	 #]*u.*,/* & */,' >>conftest.defines
-
-# Break up conftest.defines:
-ac_max_sed_lines=50
-
-# First sed command is:	 sed -f defines.sed $ac_file_inputs >"$tmp/out1"
-# Second one is:	 sed -f defines.sed "$tmp/out1" >"$tmp/out2"
-# Third one will be:	 sed -f defines.sed "$tmp/out2" >"$tmp/out1"
-# et cetera.
-ac_in='$ac_file_inputs'
-ac_out='"$tmp/out1"'
-ac_nxt='"$tmp/out2"'
-
-while :
-do
-  # Write a here document:
-    cat >>$CONFIG_STATUS <<_ACEOF
-    # First, check the format of the line:
-    cat >"\$tmp/defines.sed" <<\\CEOF
-/^[	 ]*#[	 ]*undef[	 ][	 ]*$ac_word_re[	 ]*\$/b def
-/^[	 ]*#[	 ]*define[	 ][	 ]*$ac_word_re[(	 ]/b def
-b
-:def
+cat >>conftest.undefs <<\_ACEOF
+s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
 _ACEOF
-  sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo '  :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+  # Write a limited-size here document to $tmp/defines.sed.
+  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#define' lines.
+  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
   echo 'CEOF
-    sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
-  ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
-  sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
-  grep . conftest.tail >/dev/null || break
+  sed -f $tmp/defines.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
   rm -f conftest.defines
   mv conftest.tail conftest.defines
 done
-rm -f conftest.defines conftest.tail
+rm -f conftest.defines
+echo '  fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+  # Write a limited-size here document to $tmp/undefs.sed.
+  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#undef'
+  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+  echo 'CEOF
+  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+  rm -f conftest.undefs
+  mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
 
-echo "ac_result=$ac_in" >>$CONFIG_STATUS
 cat >>$CONFIG_STATUS <<\_ACEOF
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    echo "/* Generated by configure.  */" >$tmp/config.h
+  else
+    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
+  fi
+  cat $tmp/in >>$tmp/config.h
+  rm -f $tmp/in
   if test x"$ac_file" != x-; then
-    echo "/* $configure_input  */" >"$tmp/config.h"
-    cat "$ac_result" >>"$tmp/config.h"
-    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
+    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
       { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
 echo "$as_me: $ac_file is unchanged" >&6;}
     else
+      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+      { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
       rm -f $ac_file
-      mv "$tmp/config.h" $ac_file
+      mv $tmp/config.h $ac_file
     fi
   else
-    echo "/* $configure_input  */"
-    cat "$ac_result"
+    cat $tmp/config.h
+    rm -f $tmp/config.h
   fi
-  rm -f "$tmp/out12"
 # Compute $ac_file's index in $config_headers.
 _am_stamp_count=1
 for _am_header in $config_headers :; do
@@ -5994,39 +5473,135 @@ for _am_header in $config_headers :; do
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
 $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X$ac_file : 'X\(//\)[^/]' \| \
 	 X$ac_file : 'X\(//\)$' \| \
-	 X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
+	 X$ac_file : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X$ac_file |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`/stamp-h$_am_stamp_count
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
 
-  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
- ;;
-  esac
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_dest" : 'X\(//\)[^/]' \| \
+	 X"$ac_dest" : 'X\(//\)$' \| \
+	 X"$ac_dest" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
 
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
 
-  case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+
+  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+  case $ac_dest in
+    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -6036,29 +5611,18 @@ echo "$as_me: executing $ac_file commands" >&6;}
   # each Makefile.in and add a new line on top of each file to say so.
   # So let's grep whole file.
   if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`$as_dirname -- "$mf" ||
+    dirpart=`(dirname "$mf") 2>/dev/null ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$mf" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
   else
     continue
   fi
@@ -6080,80 +5644,54 @@ echo X"$mf" |
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
-    fdir=`$as_dirname -- "$file" ||
+    fdir=`(dirname "$file") 2>/dev/null ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-    { as_dir=$dirpart/$fdir
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    { if $as_mkdir_p; then
+    mkdir -p $dirpart/$fdir
+  else
+    as_dir=$dirpart/$fdir
     as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
     done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
    { (exit 1); exit 1; }; }; }
+
     # echo "creating $dirpart/$file"
     echo '# dummy' > "$dirpart/$file"
   done
 done
  ;;
-    "default":C)  ;;
-
+    default )  ;;
   esac
-done # for ac_tag
+done
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF
 
 { (exit 0); exit 0; }
 _ACEOF
diff --git a/doc/Makefile.in b/doc/Makefile.in
index c2166a4..dee11b5 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -82,7 +82,6 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-GREP = @GREP@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -109,6 +108,8 @@ SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -123,30 +124,23 @@ build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
 datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
-htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
-localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
-psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
diff --git a/src/Makefile.in b/src/Makefile.in
index d496342..9e94d9f 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -117,7 +117,6 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-GREP = @GREP@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -144,6 +143,8 @@ SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -158,30 +159,23 @@ build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
 datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
-htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
-localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
-psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
diff --git a/src/atomic_ops/Makefile.in b/src/atomic_ops/Makefile.in
index 023e686..da87634 100644
--- a/src/atomic_ops/Makefile.in
+++ b/src/atomic_ops/Makefile.in
@@ -91,7 +91,6 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-GREP = @GREP@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -118,6 +117,8 @@ SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -132,30 +133,23 @@ build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
 datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
-htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
-localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
-psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
diff --git a/src/atomic_ops/sysdeps/Makefile.in b/src/atomic_ops/sysdeps/Makefile.in
index 17127c1..6839126 100644
--- a/src/atomic_ops/sysdeps/Makefile.in
+++ b/src/atomic_ops/sysdeps/Makefile.in
@@ -84,7 +84,6 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-GREP = @GREP@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -111,6 +110,8 @@ SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -125,30 +126,23 @@ build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
 datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
-htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
-localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
-psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
diff --git a/src/config.h.in b/src/config.h.in
index 5b61fbd..8336d01 100644
--- a/src/config.h.in
+++ b/src/config.h.in
@@ -33,6 +33,9 @@
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 
+/* Define to 1 if your C compiler doesn't accept -c and -o together. */
+#undef NO_MINUS_C_MINUS_O
+
 /* Name of package */
 #undef PACKAGE
 
diff --git a/tests/Makefile.in b/tests/Makefile.in
index b3af186..5a0c2f4 100644
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -99,7 +99,6 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-GREP = @GREP@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -126,6 +125,8 @@ SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -140,30 +141,23 @@ build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
 datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
-htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
-localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
-psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@