diff options
Diffstat (limited to 'crypto/apr_crypto_nss.c')
| -rw-r--r-- | crypto/apr_crypto_nss.c | 865 |
1 files changed, 865 insertions, 0 deletions
diff --git a/crypto/apr_crypto_nss.c b/crypto/apr_crypto_nss.c new file mode 100644 index 0000000..0d1d2ca --- /dev/null +++ b/crypto/apr_crypto_nss.c @@ -0,0 +1,865 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "apr_lib.h" +#include "apu.h" +#include "apu_config.h" +#include "apu_errno.h" + +#include <ctype.h> +#include <stdlib.h> + +#include "apr_strings.h" +#include "apr_time.h" +#include "apr_buckets.h" + +#include "apr_crypto_internal.h" + +#if APU_HAVE_CRYPTO + +#include <prerror.h> + +#ifdef HAVE_NSS_NSS_H +#include <nss/nss.h> +#endif +#ifdef HAVE_NSS_H +#include <nss.h> +#endif + +#ifdef HAVE_NSS_PK11PUB_H +#include <nss/pk11pub.h> +#endif +#ifdef HAVE_PK11PUB_H +#include <pk11pub.h> +#endif + +struct apr_crypto_t { + apr_pool_t *pool; + const apr_crypto_driver_t *provider; + apu_err_t *result; + apr_array_header_t *keys; + apr_crypto_config_t *config; + apr_hash_t *types; + apr_hash_t *modes; +}; + +struct apr_crypto_config_t { + void *opaque; +}; + +struct apr_crypto_key_t { + apr_pool_t *pool; + const apr_crypto_driver_t *provider; + const apr_crypto_t *f; + CK_MECHANISM_TYPE cipherMech; + SECOidTag cipherOid; + PK11SymKey *symKey; + int ivSize; +}; + +struct apr_crypto_block_t { + apr_pool_t *pool; + const apr_crypto_driver_t *provider; + const apr_crypto_t *f; + PK11Context *ctx; + apr_crypto_key_t *key; + int blockSize; +}; + +static int key_3des_192 = APR_KEY_3DES_192; +static int key_aes_128 = APR_KEY_AES_128; +static int key_aes_192 = APR_KEY_AES_192; +static int key_aes_256 = APR_KEY_AES_256; + +static int mode_ecb = APR_MODE_ECB; +static int mode_cbc = APR_MODE_CBC; + +/** + * Fetch the most recent error from this driver. + */ +static apr_status_t crypto_error(const apu_err_t **result, + const apr_crypto_t *f) +{ + *result = f->result; + return APR_SUCCESS; +} + +/** + * Shutdown the crypto library and release resources. + * + * It is safe to shut down twice. + */ +static apr_status_t crypto_shutdown(void) +{ + if (NSS_IsInitialized()) { + SECStatus s = NSS_Shutdown(); + if (s != SECSuccess) { + return APR_EINIT; + } + } + return APR_SUCCESS; +} + +static apr_status_t crypto_shutdown_helper(void *data) +{ + return crypto_shutdown(); +} + +/** + * Initialise the crypto library and perform one time initialisation. + */ +static apr_status_t crypto_init(apr_pool_t *pool, const char *params, int *rc) +{ + SECStatus s; + const char *dir = NULL; + const char *keyPrefix = NULL; + const char *certPrefix = NULL; + const char *secmod = NULL; + int noinit = 0; + PRUint32 flags = 0; + + struct { + const char *field; + const char *value; + int set; + } fields[] = { + { "dir", NULL, 0 }, + { "key3", NULL, 0 }, + { "cert7", NULL, 0 }, + { "secmod", NULL, 0 }, + { "noinit", NULL, 0 }, + { NULL, NULL, 0 } + }; + const char *ptr; + size_t klen; + char **elts = NULL; + char *elt; + int i = 0, j; + apr_status_t status; + + if (params) { + if (APR_SUCCESS != (status = apr_tokenize_to_argv(params, &elts, pool))) { + return status; + } + while ((elt = elts[i])) { + ptr = strchr(elt, '='); + if (ptr) { + for (klen = ptr - elt; klen && apr_isspace(elt[klen - 1]); --klen) + ; + ptr++; + } + else { + for (klen = strlen(elt); klen && apr_isspace(elt[klen - 1]); --klen) + ; + } + elt[klen] = 0; + + for (j = 0; fields[j].field != NULL; ++j) { + if (klen && !strcasecmp(fields[j].field, elt)) { + fields[j].set = 1; + if (ptr) { + fields[j].value = ptr; + } + break; + } + } + + i++; + } + dir = fields[0].value; + keyPrefix = fields[1].value; + certPrefix = fields[2].value; + secmod = fields[3].value; + noinit = fields[4].set; + } + + /* if we've been asked to bypass, do so here */ + if (noinit) { + return APR_SUCCESS; + } + + /* sanity check - we can only initialise NSS once */ + if (NSS_IsInitialized()) { + return APR_EREINIT; + } + + apr_pool_cleanup_register(pool, pool, crypto_shutdown_helper, + apr_pool_cleanup_null); + + if (keyPrefix || certPrefix || secmod) { + s = NSS_Initialize(dir, certPrefix, keyPrefix, secmod, flags); + } + else if (dir) { + s = NSS_InitReadWrite(dir); + } + else { + s = NSS_NoDB_Init(NULL); + } + if (s != SECSuccess) { + if (rc) { + *rc = PR_GetError(); + } + return APR_ECRYPT; + } + + return APR_SUCCESS; + +} + +/** + * @brief Clean encryption / decryption context. + * @note After cleanup, a context is free to be reused if necessary. + * @param f The context to use. + * @return Returns APR_ENOTIMPL if not supported. + */ +static apr_status_t crypto_block_cleanup(apr_crypto_block_t *block) +{ + + if (block->ctx) { + PK11_DestroyContext(block->ctx, PR_TRUE); + block->ctx = NULL; + } + + return APR_SUCCESS; + +} + +static apr_status_t crypto_block_cleanup_helper(void *data) +{ + apr_crypto_block_t *block = (apr_crypto_block_t *) data; + return crypto_block_cleanup(block); +} + +/** + * @brief Clean encryption / decryption context. + * @note After cleanup, a context is free to be reused if necessary. + * @param f The context to use. + * @return Returns APR_ENOTIMPL if not supported. + */ +static apr_status_t crypto_cleanup(apr_crypto_t *f) +{ + apr_crypto_key_t *key; + if (f->keys) { + while ((key = apr_array_pop(f->keys))) { + if (key->symKey) { + PK11_FreeSymKey(key->symKey); + key->symKey = NULL; + } + } + } + return APR_SUCCESS; +} + +static apr_status_t crypto_cleanup_helper(void *data) +{ + apr_crypto_t *f = (apr_crypto_t *) data; + return crypto_cleanup(f); +} + +/** + * @brief Create a context for supporting encryption. Keys, certificates, + * algorithms and other parameters will be set per context. More than + * one context can be created at one time. A cleanup will be automatically + * registered with the given pool to guarantee a graceful shutdown. + * @param f - context pointer will be written here + * @param provider - provider to use + * @param params - parameter string + * @param pool - process pool + * @return APR_ENOENGINE when the engine specified does not exist. APR_EINITENGINE + * if the engine cannot be initialised. + */ +static apr_status_t crypto_make(apr_crypto_t **ff, + const apr_crypto_driver_t *provider, const char *params, + apr_pool_t *pool) +{ + apr_crypto_config_t *config = NULL; + apr_crypto_t *f; + + f = apr_pcalloc(pool, sizeof(apr_crypto_t)); + if (!f) { + return APR_ENOMEM; + } + *ff = f; + f->pool = pool; + f->provider = provider; + config = f->config = apr_pcalloc(pool, sizeof(apr_crypto_config_t)); + if (!config) { + return APR_ENOMEM; + } + f->result = apr_pcalloc(pool, sizeof(apu_err_t)); + if (!f->result) { + return APR_ENOMEM; + } + f->keys = apr_array_make(pool, 10, sizeof(apr_crypto_key_t)); + + f->types = apr_hash_make(pool); + if (!f->types) { + return APR_ENOMEM; + } + apr_hash_set(f->types, "3des192", APR_HASH_KEY_STRING, &(key_3des_192)); + apr_hash_set(f->types, "aes128", APR_HASH_KEY_STRING, &(key_aes_128)); + apr_hash_set(f->types, "aes192", APR_HASH_KEY_STRING, &(key_aes_192)); + apr_hash_set(f->types, "aes256", APR_HASH_KEY_STRING, &(key_aes_256)); + + f->modes = apr_hash_make(pool); + if (!f->modes) { + return APR_ENOMEM; + } + apr_hash_set(f->modes, "ecb", APR_HASH_KEY_STRING, &(mode_ecb)); + apr_hash_set(f->modes, "cbc", APR_HASH_KEY_STRING, &(mode_cbc)); + + apr_pool_cleanup_register(pool, f, crypto_cleanup_helper, + apr_pool_cleanup_null); + + return APR_SUCCESS; + +} + +/** + * @brief Get a hash table of key types, keyed by the name of the type against + * an integer pointer constant. + * + * @param types - hashtable of key types keyed to constants. + * @param f - encryption context + * @return APR_SUCCESS for success + */ +static apr_status_t crypto_get_block_key_types(apr_hash_t **types, + const apr_crypto_t *f) +{ + *types = f->types; + return APR_SUCCESS; +} + +/** + * @brief Get a hash table of key modes, keyed by the name of the mode against + * an integer pointer constant. + * + * @param modes - hashtable of key modes keyed to constants. + * @param f - encryption context + * @return APR_SUCCESS for success + */ +static apr_status_t crypto_get_block_key_modes(apr_hash_t **modes, + const apr_crypto_t *f) +{ + *modes = f->modes; + return APR_SUCCESS; +} + +/** + * @brief Create a key from the given passphrase. By default, the PBKDF2 + * algorithm is used to generate the key from the passphrase. It is expected + * that the same pass phrase will generate the same key, regardless of the + * backend crypto platform used. The key is cleaned up when the context + * is cleaned, and may be reused with multiple encryption or decryption + * operations. + * @note If *key is NULL, a apr_crypto_key_t will be created from a pool. If + * *key is not NULL, *key must point at a previously created structure. + * @param key The key returned, see note. + * @param ivSize The size of the initialisation vector will be returned, based + * on whether an IV is relevant for this type of crypto. + * @param pass The passphrase to use. + * @param passLen The passphrase length in bytes + * @param salt The salt to use. + * @param saltLen The salt length in bytes + * @param type 3DES_192, AES_128, AES_192, AES_256. + * @param mode Electronic Code Book / Cipher Block Chaining. + * @param doPad Pad if necessary. + * @param iterations Iteration count + * @param f The context to use. + * @param p The pool to use. + * @return Returns APR_ENOKEY if the pass phrase is missing or empty, or if a backend + * error occurred while generating the key. APR_ENOCIPHER if the type or mode + * is not supported by the particular backend. APR_EKEYTYPE if the key type is + * not known. APR_EPADDING if padding was requested but is not supported. + * APR_ENOTIMPL if not implemented. + */ +static apr_status_t crypto_passphrase(apr_crypto_key_t **k, apr_size_t *ivSize, + const char *pass, apr_size_t passLen, const unsigned char * salt, + apr_size_t saltLen, const apr_crypto_block_key_type_e type, + const apr_crypto_block_key_mode_e mode, const int doPad, + const int iterations, const apr_crypto_t *f, apr_pool_t *p) +{ + apr_status_t rv = APR_SUCCESS; + PK11SlotInfo * slot; + SECItem passItem; + SECItem saltItem; + SECAlgorithmID *algid; + void *wincx = NULL; /* what is wincx? */ + apr_crypto_key_t *key = *k; + + if (!key) { + *k = key = apr_array_push(f->keys); + } + if (!key) { + return APR_ENOMEM; + } + + key->f = f; + key->provider = f->provider; + + /* decide on what cipher mechanism we will be using */ + switch (type) { + + case (APR_KEY_3DES_192): + if (APR_MODE_CBC == mode) { + key->cipherOid = SEC_OID_DES_EDE3_CBC; + } + else if (APR_MODE_ECB == mode) { + return APR_ENOCIPHER; + /* No OID for CKM_DES3_ECB; */ + } + break; + case (APR_KEY_AES_128): + if (APR_MODE_CBC == mode) { + key->cipherOid = SEC_OID_AES_128_CBC; + } + else { + key->cipherOid = SEC_OID_AES_128_ECB; + } + break; + case (APR_KEY_AES_192): + if (APR_MODE_CBC == mode) { + key->cipherOid = SEC_OID_AES_192_CBC; + } + else { + key->cipherOid = SEC_OID_AES_192_ECB; + } + break; + case (APR_KEY_AES_256): + if (APR_MODE_CBC == mode) { + key->cipherOid = SEC_OID_AES_256_CBC; + } + else { + key->cipherOid = SEC_OID_AES_256_ECB; + } + break; + default: + /* unknown key type, give up */ + return APR_EKEYTYPE; + } + + /* AES_128_CBC --> CKM_AES_CBC --> CKM_AES_CBC_PAD */ + key->cipherMech = PK11_AlgtagToMechanism(key->cipherOid); + if (key->cipherMech == CKM_INVALID_MECHANISM) { + return APR_ENOCIPHER; + } + if (doPad) { + CK_MECHANISM_TYPE paddedMech; + paddedMech = PK11_GetPadMechanism(key->cipherMech); + if (CKM_INVALID_MECHANISM == paddedMech || key->cipherMech + == paddedMech) { + return APR_EPADDING; + } + key->cipherMech = paddedMech; + } + + /* Turn the raw passphrase and salt into SECItems */ + passItem.data = (unsigned char*) pass; + passItem.len = passLen; + saltItem.data = (unsigned char*) salt; + saltItem.len = saltLen; + + /* generate the key */ + /* pbeAlg and cipherAlg are the same. NSS decides the keylength. */ + algid = PK11_CreatePBEV2AlgorithmID(key->cipherOid, key->cipherOid, + SEC_OID_HMAC_SHA1, 0, iterations, &saltItem); + if (algid) { + slot = PK11_GetBestSlot(key->cipherMech, wincx); + if (slot) { + key->symKey = PK11_PBEKeyGen(slot, algid, &passItem, PR_FALSE, + wincx); + PK11_FreeSlot(slot); + } + SECOID_DestroyAlgorithmID(algid, PR_TRUE); + } + + /* sanity check? */ + if (!key->symKey) { + PRErrorCode perr = PORT_GetError(); + if (perr) { + f->result->rc = perr; + f->result->msg = PR_ErrorToName(perr); + rv = APR_ENOKEY; + } + } + + key->ivSize = PK11_GetIVLength(key->cipherMech); + if (ivSize) { + *ivSize = key->ivSize; + } + + return rv; +} + +/** + * @brief Initialise a context for encrypting arbitrary data using the given key. + * @note If *ctx is NULL, a apr_crypto_block_t will be created from a pool. If + * *ctx is not NULL, *ctx must point at a previously created structure. + * @param ctx The block context returned, see note. + * @param iv Optional initialisation vector. If the buffer pointed to is NULL, + * an IV will be created at random, in space allocated from the pool. + * If the buffer pointed to is not NULL, the IV in the buffer will be + * used. + * @param key The key structure. + * @param blockSize The block size of the cipher. + * @param p The pool to use. + * @return Returns APR_ENOIV if an initialisation vector is required but not specified. + * Returns APR_EINIT if the backend failed to initialise the context. Returns + * APR_ENOTIMPL if not implemented. + */ +static apr_status_t crypto_block_encrypt_init(apr_crypto_block_t **ctx, + const unsigned char **iv, const apr_crypto_key_t *key, + apr_size_t *blockSize, apr_pool_t *p) +{ + PRErrorCode perr; + SECItem * secParam; + SECItem ivItem; + unsigned char * usedIv; + apr_crypto_block_t *block = *ctx; + if (!block) { + *ctx = block = apr_pcalloc(p, sizeof(apr_crypto_block_t)); + } + if (!block) { + return APR_ENOMEM; + } + block->f = key->f; + block->pool = p; + block->provider = key->provider; + + apr_pool_cleanup_register(p, block, crypto_block_cleanup_helper, + apr_pool_cleanup_null); + + if (key->ivSize) { + if (iv == NULL) { + return APR_ENOIV; + } + if (*iv == NULL) { + SECStatus s; + usedIv = apr_pcalloc(p, key->ivSize); + if (!usedIv) { + return APR_ENOMEM; + } + apr_crypto_clear(p, usedIv, key->ivSize); + s = PK11_GenerateRandom(usedIv, key->ivSize); + if (s != SECSuccess) { + return APR_ENOIV; + } + *iv = usedIv; + } + else { + usedIv = (unsigned char *) *iv; + } + ivItem.data = usedIv; + ivItem.len = key->ivSize; + secParam = PK11_ParamFromIV(key->cipherMech, &ivItem); + } + else { + secParam = PK11_GenerateNewParam(key->cipherMech, key->symKey); + } + block->blockSize = PK11_GetBlockSize(key->cipherMech, secParam); + block->ctx = PK11_CreateContextBySymKey(key->cipherMech, CKA_ENCRYPT, + key->symKey, secParam); + + /* did an error occur? */ + perr = PORT_GetError(); + if (perr || !block->ctx) { + key->f->result->rc = perr; + key->f->result->msg = PR_ErrorToName(perr); + return APR_EINIT; + } + + if (blockSize) { + *blockSize = PK11_GetBlockSize(key->cipherMech, secParam); + } + + return APR_SUCCESS; + +} + +/** + * @brief Encrypt data provided by in, write it to out. + * @note The number of bytes written will be written to outlen. If + * out is NULL, outlen will contain the maximum size of the + * buffer needed to hold the data, including any data + * generated by apr_crypto_block_encrypt_finish below. If *out points + * to NULL, a buffer sufficiently large will be created from + * the pool provided. If *out points to a not-NULL value, this + * value will be used as a buffer instead. + * @param out Address of a buffer to which data will be written, + * see note. + * @param outlen Length of the output will be written here. + * @param in Address of the buffer to read. + * @param inlen Length of the buffer to read. + * @param ctx The block context to use. + * @return APR_ECRYPT if an error occurred. Returns APR_ENOTIMPL if + * not implemented. + */ +static apr_status_t crypto_block_encrypt(unsigned char **out, + apr_size_t *outlen, const unsigned char *in, apr_size_t inlen, + apr_crypto_block_t *block) +{ + + unsigned char *buffer; + int outl = (int) *outlen; + SECStatus s; + if (!out) { + *outlen = inlen + block->blockSize; + return APR_SUCCESS; + } + if (!*out) { + buffer = apr_palloc(block->pool, inlen + block->blockSize); + if (!buffer) { + return APR_ENOMEM; + } + apr_crypto_clear(block->pool, buffer, inlen + block->blockSize); + *out = buffer; + } + + s = PK11_CipherOp(block->ctx, *out, &outl, inlen, (unsigned char*) in, + inlen); + if (s != SECSuccess) { + PRErrorCode perr = PORT_GetError(); + if (perr) { + block->f->result->rc = perr; + block->f->result->msg = PR_ErrorToName(perr); + } + return APR_ECRYPT; + } + *outlen = outl; + + return APR_SUCCESS; + +} + +/** + * @brief Encrypt final data block, write it to out. + * @note If necessary the final block will be written out after being + * padded. Typically the final block will be written to the + * same buffer used by apr_crypto_block_encrypt, offset by the + * number of bytes returned as actually written by the + * apr_crypto_block_encrypt() call. After this call, the context + * is cleaned and can be reused by apr_crypto_block_encrypt_init(). + * @param out Address of a buffer to which data will be written. This + * buffer must already exist, and is usually the same + * buffer used by apr_evp_crypt(). See note. + * @param outlen Length of the output will be written here. + * @param ctx The block context to use. + * @return APR_ECRYPT if an error occurred. + * @return APR_EPADDING if padding was enabled and the block was incorrectly + * formatted. + * @return APR_ENOTIMPL if not implemented. + */ +static apr_status_t crypto_block_encrypt_finish(unsigned char *out, + apr_size_t *outlen, apr_crypto_block_t *block) +{ + + apr_status_t rv = APR_SUCCESS; + unsigned int outl = *outlen; + + SECStatus s = PK11_DigestFinal(block->ctx, out, &outl, block->blockSize); + *outlen = outl; + + if (s != SECSuccess) { + PRErrorCode perr = PORT_GetError(); + if (perr) { + block->f->result->rc = perr; + block->f->result->msg = PR_ErrorToName(perr); + } + rv = APR_ECRYPT; + } + crypto_block_cleanup(block); + + return rv; + +} + +/** + * @brief Initialise a context for decrypting arbitrary data using the given key. + * @note If *ctx is NULL, a apr_crypto_block_t will be created from a pool. If + * *ctx is not NULL, *ctx must point at a previously created structure. + * @param ctx The block context returned, see note. + * @param blockSize The block size of the cipher. + * @param iv Optional initialisation vector. If the buffer pointed to is NULL, + * an IV will be created at random, in space allocated from the pool. + * If the buffer is not NULL, the IV in the buffer will be used. + * @param key The key structure. + * @param p The pool to use. + * @return Returns APR_ENOIV if an initialisation vector is required but not specified. + * Returns APR_EINIT if the backend failed to initialise the context. Returns + * APR_ENOTIMPL if not implemented. + */ +static apr_status_t crypto_block_decrypt_init(apr_crypto_block_t **ctx, + apr_size_t *blockSize, const unsigned char *iv, + const apr_crypto_key_t *key, apr_pool_t *p) +{ + PRErrorCode perr; + SECItem * secParam; + apr_crypto_block_t *block = *ctx; + if (!block) { + *ctx = block = apr_pcalloc(p, sizeof(apr_crypto_block_t)); + } + if (!block) { + return APR_ENOMEM; + } + block->f = key->f; + block->pool = p; + block->provider = key->provider; + + apr_pool_cleanup_register(p, block, crypto_block_cleanup_helper, + apr_pool_cleanup_null); + + if (key->ivSize) { + SECItem ivItem; + if (iv == NULL) { + return APR_ENOIV; /* Cannot initialise without an IV */ + } + ivItem.data = (unsigned char*) iv; + ivItem.len = key->ivSize; + secParam = PK11_ParamFromIV(key->cipherMech, &ivItem); + } + else { + secParam = PK11_GenerateNewParam(key->cipherMech, key->symKey); + } + block->blockSize = PK11_GetBlockSize(key->cipherMech, secParam); + block->ctx = PK11_CreateContextBySymKey(key->cipherMech, CKA_DECRYPT, + key->symKey, secParam); + + /* did an error occur? */ + perr = PORT_GetError(); + if (perr || !block->ctx) { + key->f->result->rc = perr; + key->f->result->msg = PR_ErrorToName(perr); + return APR_EINIT; + } + + if (blockSize) { + *blockSize = PK11_GetBlockSize(key->cipherMech, secParam); + } + + return APR_SUCCESS; + +} + +/** + * @brief Decrypt data provided by in, write it to out. + * @note The number of bytes written will be written to outlen. If + * out is NULL, outlen will contain the maximum size of the + * buffer needed to hold the data, including any data + * generated by apr_crypto_block_decrypt_finish below. If *out points + * to NULL, a buffer sufficiently large will be created from + * the pool provided. If *out points to a not-NULL value, this + * value will be used as a buffer instead. + * @param out Address of a buffer to which data will be written, + * see note. + * @param outlen Length of the output will be written here. + * @param in Address of the buffer to read. + * @param inlen Length of the buffer to read. + * @param ctx The block context to use. + * @return APR_ECRYPT if an error occurred. Returns APR_ENOTIMPL if + * not implemented. + */ +static apr_status_t crypto_block_decrypt(unsigned char **out, + apr_size_t *outlen, const unsigned char *in, apr_size_t inlen, + apr_crypto_block_t *block) +{ + + unsigned char *buffer; + int outl = (int) *outlen; + SECStatus s; + if (!out) { + *outlen = inlen + block->blockSize; + return APR_SUCCESS; + } + if (!*out) { + buffer = apr_palloc(block->pool, inlen + block->blockSize); + if (!buffer) { + return APR_ENOMEM; + } + apr_crypto_clear(block->pool, buffer, inlen + block->blockSize); + *out = buffer; + } + + s = PK11_CipherOp(block->ctx, *out, &outl, inlen, (unsigned char*) in, + inlen); + if (s != SECSuccess) { + PRErrorCode perr = PORT_GetError(); + if (perr) { + block->f->result->rc = perr; + block->f->result->msg = PR_ErrorToName(perr); + } + return APR_ECRYPT; + } + *outlen = outl; + + return APR_SUCCESS; + +} + +/** + * @brief Decrypt final data block, write it to out. + * @note If necessary the final block will be written out after being + * padded. Typically the final block will be written to the + * same buffer used by apr_crypto_block_decrypt, offset by the + * number of bytes returned as actually written by the + * apr_crypto_block_decrypt() call. After this call, the context + * is cleaned and can be reused by apr_crypto_block_decrypt_init(). + * @param out Address of a buffer to which data will be written. This + * buffer must already exist, and is usually the same + * buffer used by apr_evp_crypt(). See note. + * @param outlen Length of the output will be written here. + * @param ctx The block context to use. + * @return APR_ECRYPT if an error occurred. + * @return APR_EPADDING if padding was enabled and the block was incorrectly + * formatted. + * @return APR_ENOTIMPL if not implemented. + */ +static apr_status_t crypto_block_decrypt_finish(unsigned char *out, + apr_size_t *outlen, apr_crypto_block_t *block) +{ + + apr_status_t rv = APR_SUCCESS; + unsigned int outl = *outlen; + + SECStatus s = PK11_DigestFinal(block->ctx, out, &outl, block->blockSize); + *outlen = outl; + + if (s != SECSuccess) { + PRErrorCode perr = PORT_GetError(); + if (perr) { + block->f->result->rc = perr; + block->f->result->msg = PR_ErrorToName(perr); + } + rv = APR_ECRYPT; + } + crypto_block_cleanup(block); + + return rv; + +} + +/** + * NSS module. + */ +APU_MODULE_DECLARE_DATA const apr_crypto_driver_t apr_crypto_nss_driver = { + "nss", crypto_init, crypto_make, crypto_get_block_key_types, + crypto_get_block_key_modes, crypto_passphrase, + crypto_block_encrypt_init, crypto_block_encrypt, + crypto_block_encrypt_finish, crypto_block_decrypt_init, + crypto_block_decrypt, crypto_block_decrypt_finish, + crypto_block_cleanup, crypto_cleanup, crypto_shutdown, crypto_error +}; + +#endif |