| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
| |
On some architectures it might happen that stack layout pass will
invalidate the list of calculated procpoints by dropping some of
them. We fix this by checking whether a proc-point is in a graph
at the beginning of proc-point analysis. This is a speculative
fix for #8205.
|
| |
|
|
|
|
| |
monoidal for submitting.
Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There's only a single compiler backend now, so the 'z' suffix means
nothing. Also, the flags were confusingly named ('cmm-foo' vs
'foo-cmm',) and counter-intuitively, '-ddump-cmm' did not do at all what
you expected since the new backend went live.
Basically, all of the -ddump-cmmz-* flags are now -ddump-cmm-*. Some were
renamed to be more consistent.
This doesn't update the manual; it already mentions '-ddump-cmm' and
that flag implies all the others anyway, which is probably what you
want.
Signed-off-by: Austin Seipp <mad.one@gmail.com>
|
| |
|
|
| |
This fixes a CmmLint complaint when doing proc-point splitting.
|
| |
|
|
|
|
|
| |
All Cmm procedures now include the set of global registers that are live on
procedure entry, i.e., the global registers used to pass arguments to the
procedure. Only global registers that are use to pass arguments are included in
this list.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The main change here is that the Cmm parser now allows high-level cmm
code with argument-passing and function calls. For example:
foo ( gcptr a, bits32 b )
{
if (b > 0) {
// we can make tail calls passing arguments:
jump stg_ap_0_fast(a);
}
return (x,y);
}
More details on the new cmm syntax are in Note [Syntax of .cmm files]
in CmmParse.y.
The old syntax is still more-or-less supported for those occasional
code fragments that really need to explicitly manipulate the stack.
However there are a couple of differences: it is now obligatory to
give a list of live GlobalRegs on every jump, e.g.
jump %ENTRY_CODE(Sp(0)) [R1];
Again, more details in Note [Syntax of .cmm files].
I have rewritten most of the .cmm files in the RTS into the new
syntax, except for AutoApply.cmm which is generated by the genapply
program: this file could be generated in the new syntax instead and
would probably be better off for it, but I ran out of enthusiasm.
Some other changes in this batch:
- The PrimOp calling convention is gone, primops now use the ordinary
NativeNodeCall convention. This means that primops and "foreign
import prim" code must be written in high-level cmm, but they can
now take more than 10 arguments.
- CmmSink now does constant-folding (should fix #7219)
- .cmm files now go through the cmmPipeline, and as a result we
generate better code in many cases. All the object files generated
for the RTS .cmm files are now smaller. Performance should be
better too, but I haven't measured it yet.
- RET_DYN frames are removed from the RTS, lots of code goes away
- we now have some more canned GC points to cover unboxed-tuples with
2-4 pointers, which will reduce code size a little.
|
| | |
|
| |
|
|
|
|
|
|
|
| |
Proc-point splitting is only required by backends that do not support
having proc-points within a code block (that is, everything except the
native backend, i.e. LLVM and C).
Not doing proc-point splitting saves some compilation time, and might
produce slightly better code in some cases.
|
| | |
|
| | |
|
| |
|
|
|
|
| |
This gives the register allocator access to R1.., F1.., D1.. etc. for
the new code generator, and is a cheap way to eliminate all the extra
"x = R1" assignments that we get from copyIn.
|
| | |
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* origin/master: (756 commits)
don't crash if argv[0] == NULL (#7037)
-package P was loading all versions of P in GHCi (#7030)
Add a Note, copying text from #2437
improve the --help docs a bit (#7008)
Copy Data.HashTable's hashString into our Util module
Build fix
Build fixes
Parse error: suggest brackets and indentation.
Don't build the ghc DLL on Windows; works around trac #5987
On Windows, detect if DLLs have too many symbols; trac #5987
Add some more Integer rules; fixes #6111
Fix PA dfun construction with silent superclass args
Add silent superclass parameters to the vectoriser
Add silent superclass parameters (again)
Mention Generic1 in the user's guide
Make the GHC API a little more powerful.
tweak llvm version warning message
New version of the patch for #5461.
Fix Word64ToInteger conversion rule.
Implemented feature request on reconfigurable pretty-printing in GHCi (#5461)
...
Conflicts:
compiler/basicTypes/UniqSupply.lhs
compiler/cmm/CmmBuildInfoTables.hs
compiler/cmm/CmmLint.hs
compiler/cmm/CmmOpt.hs
compiler/cmm/CmmPipeline.hs
compiler/cmm/CmmStackLayout.hs
compiler/cmm/MkGraph.hs
compiler/cmm/OldPprCmm.hs
compiler/codeGen/CodeGen.lhs
compiler/codeGen/StgCmm.hs
compiler/codeGen/StgCmmBind.hs
compiler/codeGen/StgCmmLayout.hs
compiler/codeGen/StgCmmUtils.hs
compiler/main/CodeOutput.lhs
compiler/main/HscMain.hs
compiler/nativeGen/AsmCodeGen.lhs
compiler/simplStg/SimplStg.lhs
|
| | |
| |
| |
| |
| | |
We can now get the Platform from the DynFlags inside an SDoc, so we
no longer need to pass the Platform in.
|
| | | |
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Also, do removeDeadAssignments instead of cmmLiveness before stack
allocation, because the former also does liveness analysis, and we can
do just one liveness analysis instead of two. The stack layout
algorithm doesn't introduce any dead assignments, so this doesn't
affect the generated code.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Also:
- improvements to code generation: push slow-call continuations
on the stack instead of generating explicit continuations
- remove unused CmmInfo wrapper type (replace with CmmInfoTable)
- squash Area and AreaId together, remove now-unused RegSlot
- comment out old unused stack-allocation code that no longer
compiles after removal of RegSlot
|
| | | |
|
| | | |
|
| | | |
|
| |/ |
|
| |
|
|
| |
__GLASGOW_HASKELL__ >= 612 is now always true
|
| |
|
|
|
| |
CmmTop -> CmmDecl
CmmPgm -> CmmGroup
|
| |
|
|
|
|
| |
* Move CgRep (private to old codgen) from SMRep to ClosureInfo
* Avoid using CgRep in new codegen
* Move SMRep and Bitmap from codeGen/ to cmm/
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
some info<->entry conversions
|
| |
|
|
|
|
|
|
|
|
|
|
| |
There's now a variant of the Outputable class that knows what
platform we're targetting:
class PlatformOutputable a where
pprPlatform :: Platform -> a -> SDoc
pprPlatformPrec :: Platform -> Rational -> a -> SDoc
and various instances have had to be converted to use that class,
and we pass Platform around accordingly.
|
| |
|
|
| |
Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
|
| |
|
|
|
|
|
| |
This patch fixes silliness where the SP pointer is continually
bumped up and down.
Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This changes the new code generator to make use of the Hoopl package
for dataflow analysis. Hoopl is a new boot package, and is maintained
in a separate upstream git repository (as usual, GHC has its own
lagging darcs mirror in http://darcs.haskell.org/packages/hoopl).
During this merge I squashed recent history into one patch. I tried
to rebase, but the history had some internal conflicts of its own
which made rebase extremely confusing, so I gave up. The history I
squashed was:
- Update new codegen to work with latest Hoopl
- Add some notes on new code gen to cmm-notes
- Enable Hoopl lag package.
- Add SPJ note to cmm-notes
- Improve GC calls on new code generator.
Work in this branch was done by:
- Milan Straka <fox@ucw.cz>
- John Dias <dias@cs.tufts.edu>
- David Terei <davidterei@gmail.com>
Edward Z. Yang <ezyang@mit.edu> merged in further changes from GHC HEAD
and fixed a few bugs.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
o Fixed bug that emitted the copy-in code for closure entry
in the wrong place -- at the initialization of the closure.
o Refactored some of the closure entry code.
o Added code to check that no LocalRegs are live-in to a procedure
-- trip up some buggy programs earlier
o Fixed environment bindings for thunks
-- we weren't (re)binding the free variables in a thunk
o Fixed a bug in proc-point splitting that dropped some updates
to the entry block in a procedure.
o Fixed improper calls to code that generates CmmLit's for strings
o New invariant on cg_loc in CgIdInfo: the expression is always tagged
o Code to load free vars on entry to a thunk was (wrongly) placed before
the heap check.
o Some of the StgCmm code was redundantly passing around Id's
along with CgIdInfo's; no more.
o Initialize the LocalReg's that point to a closure before allocating and
initializing the closure itself -- otherwise, we have problems with
recursive closure bindings
o BlockEnv and BlockSet types are now abstract.
o Update frames:
- push arguments in Old call area
- keep track of the return sp in the FCode monad
- keep the return sp in every call, tail call, and return
(because it might be different at different call sites,
e.g. tail calls to the gc after a heap check are performed
before pushing the update frame)
- set the sp appropriately on returns and tail calls
o Reduce call, tail call, and return to a single LastCall node
o Added slow entry code, using different calling conventions on entry and tail call
o More fixes to the calling convention code.
The tricky stuff is all about the closure environment: it must be passed in R1,
but in non-closures, there is no such argument, so we can't treat all arguments
the same way: the closure environment is special. Maybe the right step forward
would be to define a different calling convention for closure arguments.
o Let-no-escapes need to be emitted out-of-line -- otherwise, we drop code.
o Respect RTS requirement of word alignment for pointers
My stack allocation can pack sub-word values into a single word on the stack,
but it wasn't requiring word-alignment for pointers. It does now,
by word-aligning both pointer registers and call areas.
o CmmLint was over-aggresively ruling out non-word-aligned memory references,
which may be kosher now that we can spill small values into a single word.
o Wrong label order on a conditional branch when compiling switches.
o void args weren't dropped in many cases.
To help prevent this kind of mistake, I defined a NonVoid wrapper,
which I'm applying only to Id's for now, although there are probably
other good candidates.
o A little code refactoring: separate modules for procpoint analysis splitting,
stack layout, and building infotables.
o Stack limit check: insert along with the heap limit check, using a symbolic
constant (a special CmmLit), then replace it when the stack layout is known.
o Removed last node: MidAddToContext
o Adding block id as a literal: means that the lowering of the calling conventions
no longer has to produce labels early, which was inhibiting common-block elimination.
Will also make it easier for the non-procpoint-splitting path.
o Info tables: don't try to describe the update frame!
o Over aggressive use of NonVoid!!!!
Don't drop the non-void args before setting the type of the closure!!!
o Sanity checking:
Added a pass to stub dead dead slots on the stack
(only ~10 lines with the dataflow framework)
o More sanity checking:
Check that incoming pointer arguments are non-stubbed.
Note: these checks are still subject to dead-code removal, but they should
still be quite helpful.
o Better sanity checking: why stop at function arguments?
Instead, in mkAssign, check that _any_ assignment to a pointer type is non-null
-- the sooner the crash, the easier it is to debug.
Still need to add the debugging flag to turn these checks on explicitly.
o Fixed yet another calling convention bug.
This time, the calls to the GC were wrong. I've added a new convention
for GC calls and invoked it where appropriate.
We should really straighten out the calling convention stuff:
some of the code (and documentation) is spread across the compiler,
and there's some magical use of the node register that should really
be handled (not avoided) by calling conventions.
o Switch bug: the arms in mkCmmLitSwitch weren't returning to a single join point.
o Environment shadowing problem in Stg->Cmm:
When a closure f is bound at the top-level, we should not bind f to the
node register on entry to the closure.
Why? Because if the body of f contains a let-bound closure g that refers
to f, we want to make sure that it refers to the static closure for f.
Normally, this would all be fine, because when we compile a closure,
we rebind free variables in the environment. But f doesn't look like
a free variable because it's a static value. So, the binding for f
remains in the environment when we compile g, inconveniently referring
to the wrong thing.
Now, I bind the variable in the local environment only if the closure is not
bound at the top level. It's still okay to make assumptions about the
node holding the closure environment; we just won't find the binding
in the environment, so code that names the closure will now directly
get the label of the static closure, not the node register holding a
pointer to the static closure.
o Don't generate bogus Cmm code containing SRTs during the STG -> Cmm pass!
The tables made reference to some labels that don't exist when we compute and
generate the tables in the back end.
o Safe foreign calls need some special treatment (at least until we have the integrated
codegen). In particular:
o they need info tables
o they are not procpoints -- the successor had better be in the same procedure
o we cannot (yet) implement the calling conventions early, which means we have
to carry the calling-conv info all the way to the end
o We weren't following the old convention when registering a module.
Now, we use update frames to push any new modules that have to be registered
and enter the youngest one on the stack.
We also use the update frame machinery to specify that the return should pop
the return address off the stack.
o At each safe foreign call, an infotable must be at the bottom of the stack,
and the TSO->sp must point to it.
o More problems with void args in a direct call to a function:
We were checking the args (minus voids) to check whether the call was saturated,
which caused problems when the function really wasn't saturated because it
took an extra void argument.
o Forgot to distinguish integer != from floating != during Stg->Cmm
o Updating slotEnv and areaMap to include safe foreign calls
The dataflow analyses that produce the slotEnv and areaMap give
results for each basic block, but we also need the results for
a safe foreign call, which is a middle node.
After running the dataflow analysis, we have another pass that
updates the results to includ any safe foreign calls.
o Added a static flag for the debugging technique that inserts
instructions to stub dead slots on the stack and crashes when
a stubbed value is loaded into a pointer-typed LocalReg.
o C back end expects to see return continuations before their call sites.
Sorted the flowgraphs appropriately after splitting.
o PrimOp calling conventions are special -- unlimited registers, no stack
Yet another calling convention...
o More void value problems: if the RHS of a case arm is a void-typed variable,
don't try to return it.
o When calling some primOp, they may allocate memory; if so, we need to
do a heap check when we return from the call.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
o Moved BlockId stuff to a new file to avoid module recursion
o Defined stack areas for parameter-passing locations and spill slots
o Part way through replacing copy in and copy out nodes
- added movement instructions for stack pointer
- added movement instructions for call and return parameters
(but not with the proper calling conventions)
o Inserting spills and reloads for proc points is now procpoint-aware
(it was relying on the presence of a CopyIn node as a proxy for
procpoint knowledge)
o Changed ZipDataflow to expect AGraphs (instead of being polymorphic in
the type of graph)
|
| | |
|
| |
|
|
|
|
|
| |
Older GHCs can't parse OPTIONS_GHC.
This also changes the URL referenced for the -w options from
WorkingConventions#Warnings to CodingStyle#Warnings for the compiler
modules.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The parser/flattener will generate an extra block after an if/else
statement even if both branches exit the function. So it is possible
for the input to the CPS pass to have dead/unreachable blocks.
If a dead block goes to a live block then the live block would
have more parents than the dead block and prior to this patch
the live block would then be identified as a proc point.
This is fixed by adding a check to see if the parent
has at least one owner.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These include:
- Stack size detection now includes function arguments.
- Stack size detection now avoids stack checks just because of
the GC block.
- A CmmCall followed by a CmmBranch will no longer generate an extra
continuation consisting just of the brach.
- Multiple CmmCall/CmmBranch pairs that all go to the same place
will try to use the same continuation. If they can't (because
the return value signature is different), adaptor block are built.
- Function entry statements are now in a separate block.
(Fixed bug with branches to the entry block having unintended effects.)
- Other changes that I can't recall right now.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This eliminates one of the panics introduced by
the previous patch:
'First pass at implementing info tables for CPS'
The other panic introduced by that patch still remains.
It was due to the need to convert from a
ContinuationInfo to a CmmInfo.
(codeGen/CgInfoTbls.hs:emitClosureCodeAndInfoTable)
(codeGen/CgInfoTbls.hs:emitReturnTarget)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a fairly complete implementation, however
two 'panic's have been placed in the critical path
where the implementation is still a bit lacking so
do not expect it to run quite yet.
One call to panic is because we still need to create
a GC block for procedures that don't have them yet.
(cmm/CmmCPS.hs:continuationToProc)
The other is due to the need to convert from a
ContinuationInfo to a CmmInfo.
(codeGen/CgInfoTbls.hs:emitClosureCodeAndInfoTable)
(codeGen/CgInfoTbls.hs:emitReturnTarget)
|
| | |
|
| | |
|
| |
|
