Rename ghci.sh and build.sh to ghci and build respectively

Convert hadrian buildscripts to unsuffixed, dashed form

final cleanups

21 files changed, 45 insertions, 45 deletions

diff --git a/hadrian/.gitignore b/hadrian/.gitignore
index 697afc9663..91e8fb77c8 100644
--- a/hadrian/.gitignore
+++ b/hadrian/.gitignore
@@ -1,19 +1,19 @@
 # generated by the configure script
 cfg/system.config
 
-# build.bat and build.sh specific
+# build.bat and build specific
 /bin/
 
-# build.cabal.sh specific
+# build-cabal specific
 /dist/
 /.cabal-sandbox/
 cabal.sandbox.config
 
-# build.cabal-new.sh specific
+# build-cabal-new specific
 /dist-newstyle/
 .ghc.environment.*
 
-# build.stack.sh and build.stack.bat specific
+# build-stack and build-stack.bat specific
 /.stack-work/
 
 # the user settings
@@ -23,4 +23,4 @@ cabal.sandbox.config
 *~
 
 # ghcid output
-/ghcid.txt
\ No newline at end of file
+/ghcid.txt
diff --git a/hadrian/README.md b/hadrian/README.md
index ab343c98e8..c653d80902 100644
--- a/hadrian/README.md
+++ b/hadrian/README.md
@@ -21,7 +21,7 @@ tree:
 
 ```
 ./boot && ./configure
-hadrian/build.sh -j
+hadrian/build -j
 ```
 
 or on Windows:
@@ -39,8 +39,8 @@ or simply `-c`. See the overview of command line flags below.
 Notes:
 
 * If the default build script doesn't work, you might want to try another one,
-e.g. based on Cabal sandboxes (`build.cabal.*`), Stack (`build.stack.*`) or Nix
-(`build.stack.nix.*`).
+e.g. based on Cabal sandboxes (`build-cabal.*`), Stack (`build-stack.*`) or Nix
+(`build-stack-nix.*`).
 
 * On Windows, if you do not want to install MSYS, you can use the Stack-based
 build script (Stack provides a managed MSYS environment), as described in
@@ -164,18 +164,18 @@ build stage1:exe:haddock
 
 #### Fast feedback using ghci
 
-Running the `./hadrian/ghci.sh` script will load the main compiler into
+Running the `./hadrian/ghci` script will load the main compiler into
 a ghci session. This is intended for fast development feedback, modules are only
 typechecked so it isn't possible to run any functions in the repl.
 
 ```
-./hadrian/ghci.sh
+./hadrian/ghci
 ```
 
 You can also use this target with `ghcid`.
 
 ```
-ghcid --command="./hadrian/ghci.sh"
+ghcid --command="./hadrian/ghci"
 ```
 
 The first time this command is run hadrian will need to compile a few dependencies
@@ -188,7 +188,7 @@ have the effect of passing `-j` to both hadrian and ghci so they will both
 build in parallel.
 
 ```
-./hadrian/ghci.sh -j8
+./hadrian/ghci -j8
 ```
 
 #### Testing
@@ -272,12 +272,12 @@ a GHC API session with the correct environment to load a module into your own
 GHC session. This is how `haskell-ide-engine` is able to support hadrian.
 
 ```
-> ./hadrian/build.sh tool-args
+> ./hadrian/build tool-args
 -hide-all-packages -no-user-package-db -package-db _build/stage0/lib/packag...
 ```
 
 
-The `./hadrian/ghci.sh` script is implemented using this target.
+The `./hadrian/ghci` script is implemented using this target.
 
 Troubleshooting
 ---------------
diff --git a/hadrian/ghci.sh b/hadrian/build
index 06ad47a66e..01e050360f 100755
--- a/hadrian/ghci.sh
+++ b/hadrian/build
@@ -1,4 +1,4 @@
 #!/usr/bin/env bash
 
 # By default on Linux/MacOS we build Hadrian using Cabal
-(. "hadrian/ghci.cabal.sh" "$@")
+(. "hadrian/build-cabal" "$@")
diff --git a/hadrian/build.cabal.sh b/hadrian/build-cabal
index c385542410..c385542410 100755
--- a/hadrian/build.cabal.sh
+++ b/hadrian/build-cabal
diff --git a/hadrian/build.cabal.bat b/hadrian/build-cabal.bat
index aa0acab4e4..aa0acab4e4 100644
--- a/hadrian/build.cabal.bat
+++ b/hadrian/build-cabal.bat
diff --git a/hadrian/build.stack.sh b/hadrian/build-stack
index 7a45042ebd..7a45042ebd 100755
--- a/hadrian/build.stack.sh
+++ b/hadrian/build-stack
diff --git a/hadrian/build-stack-nix b/hadrian/build-stack-nix
new file mode 100755
index 0000000000..a3ac6e6ae0
--- /dev/null
+++ b/hadrian/build-stack-nix
@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+HADRIAN_NIX=YES hadrian/build-stack
diff --git a/hadrian/build.stack.bat b/hadrian/build-stack.bat
index 09bfd9561e..09bfd9561e 100644
--- a/hadrian/build.stack.bat
+++ b/hadrian/build-stack.bat
diff --git a/hadrian/build.bat b/hadrian/build.bat
index e71f886462..06b5b00395 100644
--- a/hadrian/build.bat
+++ b/hadrian/build.bat
@@ -1,4 +1,4 @@
 @echo off
 
 rem By default on Windows we build Hadrian using Cabal
-hadrian/build.cabal.bat %*
+hadrian/build-cabal.bat %*
diff --git a/hadrian/build.stack.nix.sh b/hadrian/build.stack.nix.sh
deleted file mode 100755
index b30c114143..0000000000
--- a/hadrian/build.stack.nix.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-
-HADRIAN_NIX=YES hadrian/build.stack.sh
diff --git a/hadrian/completion.sh b/hadrian/completion.sh
index 589fdf5795..2f31123c5b 100755
--- a/hadrian/completion.sh
+++ b/hadrian/completion.sh
@@ -3,5 +3,5 @@
 hadrian=$(cd hadrian; cabal new-exec which hadrian; cd ..)
 all_settings=$($hadrian autocomplete --complete-setting="$@" --quiet)
 
-complete -W "$all_settings" hadrian/build.sh
-complete -W "$all_settings" hadrian/build.cabal.sh
+complete -W "$all_settings" hadrian/build
+complete -W "$all_settings" hadrian/build-cabal
diff --git a/hadrian/doc/testsuite.md b/hadrian/doc/testsuite.md
index 65202dc038..ed1205ec0f 100644
--- a/hadrian/doc/testsuite.md
+++ b/hadrian/doc/testsuite.md
@@ -6,7 +6,7 @@ The simplest way to run the testsuite is
 
 ``` sh
 # assuming 'build' is the build script you're using
-# (hadrian/build.sh, hadrian/build.bat, ...)
+# (hadrian/build, hadrian/build.bat, ...)
 build test
 ```
 
diff --git a/hadrian/doc/user-settings.md b/hadrian/doc/user-settings.md
index de0d452fd5..9963bac5ed 100644
--- a/hadrian/doc/user-settings.md
+++ b/hadrian/doc/user-settings.md
@@ -106,7 +106,7 @@ userArgs = mconcat
 You can match any combination of the `builder`, `stage`, `package`, `way`, `input`
 and `output` predicates when specifying custom command line arguments. File
 patterns such as `"**/Prelude.*"` can be used when matching input and output files,
-where `**` matches an arbitrary number of path components, but not absolute path 
+where `**` matches an arbitrary number of path components, but not absolute path
 prefixes, and `*` matches an entire path component, excluding any separators.
 
 #### Enabling -Werror
@@ -368,7 +368,7 @@ the stage.
 We could equivalently specify those settings on the command-line:
 
 ``` sh
-$ hadrian/build.sh "stage1.ghc-bin.ghc.link.opts += -eventlog" \
+$ hadrian/build "stage1.ghc-bin.ghc.link.opts += -eventlog" \
                    "*.base.ghc.*.opts += -v3"
 ```
 
@@ -388,7 +388,7 @@ the right names for them:
   when building all known packages, if the Hadrian command ever gets them to be
   built;
 - the remaining slots specify the builder and how it was invoked,
-  
+
   * `ghc` refers to GHC commands; the final slot refers to how GHC is invoked:
 
     * `c.opts` for commands that build C files with GHC
@@ -397,7 +397,7 @@ the right names for them:
 	  * `deps.opts` for commands that figure out dependencies between Haskell modules
 	    (with `ghc -M`)
 	  * `toolargs.opts` for GHC commands that are used to generate the right ghci
-	    argument for `hadrian/ghci.sh` to work
+	    argument for `hadrian/ghci` to work
 
   * `cc` refers to C compiler commands
 
@@ -426,15 +426,15 @@ that takes an (optional) argument, `--complete-setting=<some string>`, and
 prints on stdout all the setting keys that have the given string as a prefix.
 
 There is a `hadrian/completion.sh` script that makes use of this rule to
-install Bash completions for `hadrian/build.sh` and `hadrian/build.cabal.sh`.
+install Bash completions for `hadrian/build` and `hadrian/build-cabal`.
 You can try it out by doing:
 
 ``` sh
 $ source hadrian/completion.sh
-$ hadrian/build.sh <TAB>
-$ hadrian/build.sh stage1.ba<TAB>
-$ hadrian/build.sh "stage1.base.ghc.<TAB>
-$ hadrian/build.sh "*.*.ghc.*.opts += -v3" "stage0.ghc-bin.ghc.lin<TAB>
+$ hadrian/build <TAB>
+$ hadrian/build stage1.ba<TAB>
+$ hadrian/build "stage1.base.ghc.<TAB>
+$ hadrian/build "*.*.ghc.*.opts += -v3" "stage0.ghc-bin.ghc.lin<TAB>
 ```
 
 [split-sections]: https://downloads.haskell.org/~ghc/latest/docs/html/users_guide/phases.html#ghc-flag--split-sections
diff --git a/hadrian/doc/windows.md b/hadrian/doc/windows.md
index 9701b804f2..d8fc414f3a 100644
--- a/hadrian/doc/windows.md
+++ b/hadrian/doc/windows.md
@@ -38,7 +38,7 @@ but are much simpler and may also be more robust.
 

 The `stack build` and `stack exec hadrian` commands can be replaced by an

 invocation of Hadrian's Stack-based build script:

-`build.stack.bat -j --flavour=quickest`. Use this script if you plan to work on

+`build-stack.bat -j --flavour=quickest`. Use this script if you plan to work on

 Hadrian and/or rebuild GHC often.

 

 ## Prerequisites

diff --git a/hadrian/build.sh b/hadrian/ghci
index 1fde2d6373..b395de4f08 100755
--- a/hadrian/build.sh
+++ b/hadrian/ghci
@@ -1,4 +1,4 @@
 #!/usr/bin/env bash
 
 # By default on Linux/MacOS we build Hadrian using Cabal
-(. "hadrian/build.cabal.sh" "$@")
+(. "hadrian/ghci-cabal" "$@")
diff --git a/hadrian/ghci-cabal b/hadrian/ghci-cabal
new file mode 100755
index 0000000000..93343e4e28
--- /dev/null
+++ b/hadrian/ghci-cabal
@@ -0,0 +1,6 @@
+#!/usr/bin/env sh
+
+set -e
+
+GHC_FLAGS="$GHC_FLAGS $(TERM=dumb CABFLAGS=-v0 "hadrian/build-cabal" tool-args -q --build-root=.hadrian_ghci --flavour=ghc-in-ghci "$@")"
+ghci $GHC_FLAGS "$@" -fno-code -fwrite-interface -hidir=.hadrian_ghci/interface -O0 ghc/Main.hs +RTS -A128m
diff --git a/hadrian/ghci.stack.sh b/hadrian/ghci-stack
index 08fcb0ac9c..3c850cdac8 100755
--- a/hadrian/ghci.stack.sh
+++ b/hadrian/ghci-stack
@@ -2,5 +2,5 @@
 
 set -e
 
-GHC_FLAGS="$GHC_FLAGS $(TERM=dumb CABFLAGS=-v0 "hadrian/build.stack.sh" tool-args -q --build-root=.hadrian_ghci --flavour=ghc-in-ghci "$@")"
+GHC_FLAGS="$GHC_FLAGS $(TERM=dumb CABFLAGS=-v0 "hadrian/build-stack" tool-args -q --build-root=.hadrian_ghci --flavour=ghc-in-ghci "$@")"
 stack exec -- ghci $GHC_FLAGS "$@" -fno-code -fwrite-interface -hidir=.hadrian_ghci/interface -O0 ghc/Main.hs +RTS -A128m
diff --git a/hadrian/ghci.cabal.sh b/hadrian/ghci.cabal.sh
deleted file mode 100755
index f31b94574f..0000000000
--- a/hadrian/ghci.cabal.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/usr/bin/env sh
-
-set -e
-
-GHC_FLAGS="$GHC_FLAGS $(TERM=dumb CABFLAGS=-v0 "hadrian/build.cabal.sh" tool-args -q --build-root=.hadrian_ghci --flavour=ghc-in-ghci "$@")"
-ghci $GHC_FLAGS "$@" -fno-code -fwrite-interface -hidir=.hadrian_ghci/interface -O0 ghc/Main.hs +RTS -A128m
diff --git a/hadrian/hie-bios b/hadrian/hie-bios
index db06589c2b..b6e5a471eb 100755
--- a/hadrian/hie-bios
+++ b/hadrian/hie-bios
@@ -3,7 +3,7 @@
 # When run, this program will output a list of arguments which are necessary to
 # load the GHC library component into GHCi. The program is used by `ghcide` in
 # order to automatically set up the correct GHC API session for a project.
-TERM=dumb CABFLAGS=-v0 $PWD/hadrian/build.cabal.sh tool-args -q --build-root=.hie-bios --flavour=ghc-in-ghci > $HIE_BIOS_OUTPUT
+TERM=dumb CABFLAGS=-v0 $PWD/hadrian/build-cabal tool-args -q --build-root=.hie-bios --flavour=ghc-in-ghci > $HIE_BIOS_OUTPUT
 echo -ighc >> $HIE_BIOS_OUTPUT
 echo "ghc/Main.hs" >> $HIE_BIOS_OUTPUT
 
diff --git a/hadrian/src/Rules.hs b/hadrian/src/Rules.hs
index 9b9f7557f3..f479ba679f 100644
--- a/hadrian/src/Rules.hs
+++ b/hadrian/src/Rules.hs
@@ -34,7 +34,7 @@ import UserSettings
 -- run, the target prints out the arguments that would be passed to @ghc@
 -- during normal compilation to @stdout@.
 --
--- This target is called by the `ghci.sh` script in order to load all of GHC's
+-- This target is called by the `ghci` script in order to load all of GHC's
 -- modules into GHCi.
 toolArgsTarget :: Rules ()
 toolArgsTarget = do
diff --git a/hadrian/src/Settings.hs b/hadrian/src/Settings.hs
index b57029a967..7c6a24af27 100755
--- a/hadrian/src/Settings.hs
+++ b/hadrian/src/Settings.hs
@@ -105,7 +105,7 @@ It now also offers a more "old-school" interface, in the form of
 @foo.bar.baz = v@ or @foo.bar.baz += v@ expressions, that one can
 pass on the command line that invokes hadrian:
 
-> $ hadrian/build.sh --flavour=quickest -j "stage1.ghc-bin.ghc.link.opts += -v3"
+> $ hadrian/build --flavour=quickest -j "stage1.ghc-bin.ghc.link.opts += -v3"
 
 or in a file at <build root>/hadrian.settings, where <build root>
 is the build root to be used for the build, which is _build by default.
@@ -117,7 +117,7 @@ following contents:
 
 and issue:
 
-> $ hadrian/build.sh
+> $ hadrian/build
 
 Hadrian would pick up the settings given in _build/hadrian.settings (as well as
 any settings that you may additionally be passing on the command line) and
@@ -254,7 +254,7 @@ data BuilderMode = BM_Ghc (Wildcard GhcMode)
 --     - @<ghc mode>@ is one of @c@ (building C files), @hs@ (building Haskell
 --       modules), @link@ (linking object files), @deps@ (finding Haskell
 --       dependencies with @ghc -M@) or @toolargs@ (getting necessary flags to
---       make hadrian/ghci.sh work;
+--       make hadrian/ghci work;
 --     - @<cc mode>@ is one of @c@ (building C files) or @deps@ (finding C
 --       dependencies);
 --     - locations that support a wildcard (@*@) entry are here to avoid