Release 1.5.911.5.91

1 files changed, 372 insertions, 2 deletions

diff --git a/ChangeLog b/ChangeLog
index e4da387d0..d9c63b109 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,9 +1,379 @@
+=== release 1.5.91 ===
+
+2015-09-18  Sebastian Dröge <slomo@coaxion.net>
+
+	* configure.ac:
+	  releasing 1.5.91
+
+2015-09-18 11:50:31 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* po/zh_CN.po:
+	  po: Update translations
+
+2015-09-17 10:50:01 +0900  Eunhae Choi <eunhae1.choi@samsung.com>
+
+	* gst/avi/gstavidemux.c:
+	  avidemux: Fix taglist leak
+	  gst_tag_list_insert() does not take ownership of the inserted taglist.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=755138
+
+2015-09-16 07:05:36 +1000  Jan Schmidt <jan@centricular.com>
+
+	* gst/audioparsers/gstaacparse.c:
+	  aacparse: Skip LOAS AAC until a valid config is seen.
+	  It's normal when dropping into the middle of a stream to
+	  not always have the config available immediately, so skip LOAS
+	  until a valid config is seen without either setting invalid
+	  caps or erroring out.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=751386
+
+2015-09-13 15:41:38 +0200  Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+	* gst/rtpmanager/gstrtpjitterbuffer.c:
+	  rtpjitterbuffer: reset just a bit more upon flush_stop
+
+2015-09-13 15:40:09 +0200  Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+	* gst/rtpmanager/gstrtpjitterbuffer.c:
+	  rtpjitterbuffer: remove dead struct member
+
+2015-09-11 17:09:28 +0900  Vineeth TM <vineeth.tm@samsung.com>
+
+	* gst/udp/gstmultiudpsink.c:
+	  multiudpsink: fix GError memory leak when hostname resolution fails
+	  https://bugzilla.gnome.org/show_bug.cgi?id=754869
+
+2015-09-10 15:26:54 -0300  Thiago Santos <thiagoss@osg.samsung.com>
+
+	* gst/matroska/ebml-write.c:
+	  matroskamux: drop HEADER flag from output buffers
+	  Drop HEADER flag from output buffers if they are not indeed
+	  headers.
+	  Fixes resending of headers in tcp connection handling
+	  https://bugzilla.gnome.org/show_bug.cgi?id=754768
+
+2015-09-10 16:00:50 +0100  Tim-Philipp Müller <tim@centricular.com>
+
+	* gst/matroska/ebml-write.c:
+	  matroskamux: fix matroskamux ! matroskademux
+	  Don't carry over DISCONT flags from the input buffers to the
+	  output buffer, or the demuxer might reset its state when it
+	  receives the first data buffer just after parsing the simple
+	  block header, and then expect sane data to follow.
+	  Fixes matroskamux ! demux erroring out.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=754768
+	  https://bugzilla.gnome.org/show_bug.cgi?id=657805
+
+2015-09-09 12:51:40 -0700  Martin Kelly <martin@surround.io>
+
+	* gst/rtsp/README:
+	  rtsp: fix small README typo
+	  https://bugzilla.gnome.org/show_bug.cgi?id=754807
+
+2015-09-04 19:45:37 +0100  Tim-Philipp Müller <tim@centricular.com>
+
+	* gst/audioparsers/gstwavpackparse.c:
+	  wavpackparse: set both pts and dts so baseparse doesn't make up wrong dts after seeks
+	  https://bugzilla.gnome.org/show_bug.cgi?id=752106
+
+2015-09-04 19:34:41 +0100  Tim-Philipp Müller <tim@centricular.com>
+
+	* gst/audioparsers/gstflacparse.c:
+	  flacparse: set both pts and dts so baseparse doesn't make up wrong dts after a seek
+	  flac contains the sample offset in the frame header, so after a seek
+	  without index flacparse will know the exact position we landed on and
+	  timestamp buffers accordingly. It only set the pts though, which means
+	  the baseparse-set dts which was set to the seek position prevails, and
+	  since the seek was based on an estimate, there's likely a discrepancy
+	  between where we wanted to land and where we did land, so from here on
+	  that dts/pts difference will be maintained, with dts possibly multiple
+	  seconds ahead of pts, which is just wrong. The easiest way to fix this
+	  is to just set both pts and dts based on the sample offset, but perhaps
+	  parsed audio should just not have dts set at all.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=752106
+
+2015-09-06 16:33:02 +0100  Tim-Philipp Müller <tim@centricular.com>
+
+	* docs/plugins/gst-plugins-good-plugins.args:
+	* docs/plugins/gst-plugins-good-plugins.signals:
+	  docs: remove properties and signals that no longer exist
+	  https://bugzilla.gnome.org/show_bug.cgi?id=726443
+
+2013-10-11 15:13:00 +0000  George Chriss <gschriss@gmail.com>
+
+	* gst/flv/gstflvmux.c:
+	  flvmux: Make the element count in arrays not include end
+	  One-line removal of tags_written++
+	  This should fix rtmp output to crtmpserver, and hopefully
+	  noone is expecting that the element count includes the end
+	  element, as different bits of documentation say different
+	  things about whether it should or not.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=661624
+
+2015-07-30 00:59:15 +1000  Jan Schmidt <jan@centricular.com>
+
+	* gst/flv/gstflvmux.c:
+	* gst/flv/gstflvmux.h:
+	  flvmux: Store incoming bitrate tags and send in the metadata
+	  Apparently the Microsoft Azure RTMP server requires that the
+	  videodatarate and audiodatarate metadata be provided, so
+	  set those, even if it's to 0. Use the actual input bitrate
+	  tags if available.
+
+2015-09-04 00:06:29 +1000  Jan Schmidt <jan@centricular.com>
+
+	* gst/rtsp/gstrtspsrc.c:
+	  rtspsrc: Don't parse key data more than needed.
+	  When an auxilliary streams are present in the SDP media,
+	  there's no need to re-parse the SDP attributes multiple
+	  times.
+
+2015-09-03 20:56:55 +1000  Jan Schmidt <jan@centricular.com>
+
+	* gst/rtsp/gstrtspsrc.c:
+	  rtspsrc: Fix SRTP + RTX, auth access, a leak, and an invalid memory access.
+	  In parse_keymgmt(), don't mutate the input string that's been passed
+	  as const, especially since we might need the original value again if
+	  the same key info applies to multiple streams (RTX, for example).
+	  When a resource is 404, and we have auth info - retry with the auth
+	  info the same as if we had receive unauthorised, in case the resource
+	  isn't even visible until credentials are supplied.
+	  Fix a memory leak handling Mikey data.
+	  When generating a random keystring, don't overrun the 30 byte
+	  buffer by generating 32 bytes into it.
+
+2015-09-04 15:18:05 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/udp/gstudpsrc.c:
+	  udpsrc: Fix build with GLib < 2.44
+	  G_IO_ERROR_CONNECTION_CLOSED was added in 2.44.
+
+2015-09-04 12:01:52 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/udp/gstudpsrc.c:
+	  udpsrc: Ignore G_IO_ERROR_CONNECTION_CLOSED when receiving data
+	  This happens on Windows if we use the same socket for sending packets,
+	  and the remote sends ICMP port/host unreachable messages.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=754534
+
+2015-09-02 21:12:41 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/rtp/gstrtptheoradepay.c:
+	* gst/rtp/gstrtpvorbisdepay.c:
+	  rtpvorbis/theoradepay: Fix handling of fragmented packets
+	  This was broken in b1089fb520 by not considering the full packet length of a
+	  fragmented packet but only the length of the first one.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=754417
+
+2015-09-01 15:39:22 -0400  Olivier Crête <olivier.crete@collabora.com>
+
+	* gst/dtmf/gstdtmfsrc.c:
+	* gst/dtmf/gstrtpdtmfsrc.c:
+	  dtmfsrc: Reply to latency query
+
+2015-08-31 16:42:30 -0400  Olivier Crête <olivier.crete@collabora.com>
+
+	* tests/check/elements/rtpsession.c:
+	  tests: Fix rtpsession test failure
+	  The time of the first RTCP packet is semi-random, so
+	  sometimes it was produced before enough packets from
+	  the second SSRC were received. First drop queued RTCP
+	  packets, then advance the clock enough to ensure
+	  that at least one new RTCP packet is produced.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=750731
+
+2015-08-31 13:56:04 +0200  Stefan Sauer <ensonic@users.sf.net>
+
+	* tests/check/elements/level.c:
+	  level: improve the test for multi-channel mode
+	  Change the test to verify the read-index for multiple messages per buffer.
+	  See https://bugzilla.gnome.org/show_bug.cgi?id=754144
+
+2015-08-31 12:46:52 +0200  Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+	* gst/matroska/matroska-demux.c:
+	  matroskademux: Align raw video frames to 32 bytes
+	  Outputting unaligned video frames causes videoscale et al to
+	  crash when attempting SIMD-accelerated conversion.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=736965
+
+2015-08-26 23:16:46 +0200  Stefan Sauer <ensonic@users.sf.net>
+
+	* gst/level/gstlevel.c:
+	  level: fix level calculations for mutliple channels
+	  This was broken with 7b90bf32150897a141a29a12ecab555d8c5b7fab.
+
+2015-08-27 10:28:55 +0530  Ravi Kiran K N <ravi.kiran@samsung.com>
+
+	* gst/smpte/gstsmpte.c:
+	  smpte: Fix memory leak
+	  In gst_smpte_collected(), check upfront if input formats are same
+	  or not. This avoids allocation of in1 and in2 buffers and
+	  subsequent memory leak when input formats do not match.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=754153
+
+2015-08-21 11:52:19 +0100  Tim-Philipp Müller <tim@centricular.com>
+
+	* tests/check/elements/souphttpsrc.c:
+	  tests: souphttpsrc: don't try to connect to dead radio server
+
+2015-08-21 16:29:16 +0900  Vineeth TM <vineeth.tm@samsung.com>
+
+	* gst/rtsp/gstrtspsrc.c:
+	  rtspsrc: Trivial fix to check correct condition
+	  When checking for describe method, because of missing parentheses, wrong
+	  condition is being checked, which will result in wrong behavior.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=753912
+
+2015-08-21 13:19:02 +0900  Vineeth TM <vineeth.tm@samsung.com>
+
+	* gst/matroska/matroska-read-common.c:
+	  matroska: read: fix tag list memory leak
+	  gst_toc_entry_merge_tags makes a new ref of the taglist, so it should
+	  be unref'ed as soon as the tags are merged to the tocentry
+	  https://bugzilla.gnome.org/show_bug.cgi?id=753904
+
+2015-08-21 12:20:59 +0900  Vineeth TM <vineeth.tm@samsung.com>
+
+	* ext/wavpack/gstwavpackdec.c:
+	  wavpackdec: fix taglist memory leak
+	  When passing the taglist to gst_audio_decoder_merge_tags, the reference is increased
+	  by audiodecoder and the caller should free the taglist being passed.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=753903
+
+2015-08-20 14:45:33 +0200  Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com>
+
+	* sys/v4l2/gstv4l2transform.c:
+	  v4l2transform: fix pad closing
+	  Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com>
+	  https://bugzilla.gnome.org/show_bug.cgi?id=753875
+
 === release 1.5.90 ===
 
-2015-08-19  Sebastian Dröge <slomo@coaxion.net>
+2015-08-19 13:29:53 +0300  Sebastian Dröge <sebastian@centricular.com>
 
+	* ChangeLog:
+	* NEWS:
+	* RELEASE:
 	* configure.ac:
-	  releasing 1.5.90
+	* docs/plugins/gst-plugins-good-plugins.args:
+	* docs/plugins/gst-plugins-good-plugins.hierarchy:
+	* docs/plugins/gst-plugins-good-plugins.interfaces:
+	* docs/plugins/gst-plugins-good-plugins.signals:
+	* docs/plugins/inspect/plugin-1394.xml:
+	* docs/plugins/inspect/plugin-aasink.xml:
+	* docs/plugins/inspect/plugin-alaw.xml:
+	* docs/plugins/inspect/plugin-alpha.xml:
+	* docs/plugins/inspect/plugin-alphacolor.xml:
+	* docs/plugins/inspect/plugin-apetag.xml:
+	* docs/plugins/inspect/plugin-audiofx.xml:
+	* docs/plugins/inspect/plugin-audioparsers.xml:
+	* docs/plugins/inspect/plugin-auparse.xml:
+	* docs/plugins/inspect/plugin-autodetect.xml:
+	* docs/plugins/inspect/plugin-avi.xml:
+	* docs/plugins/inspect/plugin-cacasink.xml:
+	* docs/plugins/inspect/plugin-cairo.xml:
+	* docs/plugins/inspect/plugin-cutter.xml:
+	* docs/plugins/inspect/plugin-debug.xml:
+	* docs/plugins/inspect/plugin-deinterlace.xml:
+	* docs/plugins/inspect/plugin-dtmf.xml:
+	* docs/plugins/inspect/plugin-dv.xml:
+	* docs/plugins/inspect/plugin-effectv.xml:
+	* docs/plugins/inspect/plugin-equalizer.xml:
+	* docs/plugins/inspect/plugin-flac.xml:
+	* docs/plugins/inspect/plugin-flv.xml:
+	* docs/plugins/inspect/plugin-flxdec.xml:
+	* docs/plugins/inspect/plugin-gdkpixbuf.xml:
+	* docs/plugins/inspect/plugin-goom.xml:
+	* docs/plugins/inspect/plugin-goom2k1.xml:
+	* docs/plugins/inspect/plugin-icydemux.xml:
+	* docs/plugins/inspect/plugin-id3demux.xml:
+	* docs/plugins/inspect/plugin-imagefreeze.xml:
+	* docs/plugins/inspect/plugin-interleave.xml:
+	* docs/plugins/inspect/plugin-isomp4.xml:
+	* docs/plugins/inspect/plugin-jack.xml:
+	* docs/plugins/inspect/plugin-jpeg.xml:
+	* docs/plugins/inspect/plugin-level.xml:
+	* docs/plugins/inspect/plugin-matroska.xml:
+	* docs/plugins/inspect/plugin-mulaw.xml:
+	* docs/plugins/inspect/plugin-multifile.xml:
+	* docs/plugins/inspect/plugin-multipart.xml:
+	* docs/plugins/inspect/plugin-navigationtest.xml:
+	* docs/plugins/inspect/plugin-oss4.xml:
+	* docs/plugins/inspect/plugin-ossaudio.xml:
+	* docs/plugins/inspect/plugin-png.xml:
+	* docs/plugins/inspect/plugin-pulseaudio.xml:
+	* docs/plugins/inspect/plugin-replaygain.xml:
+	* docs/plugins/inspect/plugin-rtp.xml:
+	* docs/plugins/inspect/plugin-rtpmanager.xml:
+	* docs/plugins/inspect/plugin-rtsp.xml:
+	* docs/plugins/inspect/plugin-shapewipe.xml:
+	* docs/plugins/inspect/plugin-shout2send.xml:
+	* docs/plugins/inspect/plugin-smpte.xml:
+	* docs/plugins/inspect/plugin-soup.xml:
+	* docs/plugins/inspect/plugin-spectrum.xml:
+	* docs/plugins/inspect/plugin-speex.xml:
+	* docs/plugins/inspect/plugin-taglib.xml:
+	* docs/plugins/inspect/plugin-udp.xml:
+	* docs/plugins/inspect/plugin-video4linux2.xml:
+	* docs/plugins/inspect/plugin-videobox.xml:
+	* docs/plugins/inspect/plugin-videocrop.xml:
+	* docs/plugins/inspect/plugin-videofilter.xml:
+	* docs/plugins/inspect/plugin-videomixer.xml:
+	* docs/plugins/inspect/plugin-vpx.xml:
+	* docs/plugins/inspect/plugin-wavenc.xml:
+	* docs/plugins/inspect/plugin-wavpack.xml:
+	* docs/plugins/inspect/plugin-wavparse.xml:
+	* docs/plugins/inspect/plugin-ximagesrc.xml:
+	* docs/plugins/inspect/plugin-y4menc.xml:
+	* gst-plugins-good.doap:
+	* win32/common/config.h:
+	  Release 1.5.90
+
+2015-08-19 12:47:42 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* po/af.po:
+	* po/az.po:
+	* po/bg.po:
+	* po/ca.po:
+	* po/cs.po:
+	* po/da.po:
+	* po/de.po:
+	* po/el.po:
+	* po/en_GB.po:
+	* po/eo.po:
+	* po/es.po:
+	* po/eu.po:
+	* po/fi.po:
+	* po/fr.po:
+	* po/gl.po:
+	* po/hr.po:
+	* po/hu.po:
+	* po/id.po:
+	* po/it.po:
+	* po/ja.po:
+	* po/lt.po:
+	* po/lv.po:
+	* po/mt.po:
+	* po/nb.po:
+	* po/nl.po:
+	* po/or.po:
+	* po/pl.po:
+	* po/pt_BR.po:
+	* po/ro.po:
+	* po/ru.po:
+	* po/sk.po:
+	* po/sl.po:
+	* po/sq.po:
+	* po/sr.po:
+	* po/sv.po:
+	* po/tr.po:
+	* po/uk.po:
+	* po/vi.po:
+	* po/zh_CN.po:
+	* po/zh_HK.po:
+	* po/zh_TW.po:
+	  Update .po files
 
 2015-08-19 11:29:55 +0300  Sebastian Dröge <sebastian@centricular.com>