summaryrefslogtreecommitdiff
path: root/sysdeps/powerpc/powerpc32
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: Fix signal handling in backtraceAdhemerval Zanella2017-05-111-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now with read consolidation which uses SYSCALL_CANCEL macro, a frame pointer is created in the syscall code and this makes the powerpc backtrace obtain a bogus entry for the signal handling patch. It is because it does not setup the correct frame pointer register (r1) based on the saved value from the kernel sigreturn. It was not failing because the syscall frame pointer register was the same one for the next frame (the function that actually called the syscall). This patch fixes it by setup the next stack frame using the saved one by the kernel sigreturn. It fixes tst-backtrace{5,6} from the read consolidation patch. Checked on powerpc-linux-gnu and powerpc64le-linux-gnu. * sysdeps/powerpc/powerpc32/backtrace.c (is_sigtramp_address): Use void* for argument type and use VDSO_SYMBOL macro. (is_sigtramp_address_rt): Likewise. (__backtrace): Setup expected frame pointer address for signal handling. * sysdeps/powerpc/powerpc64/backtrace.c (is_sigtramp_address): Use void* for argumetn type and use VSDO_SYMBOL macro. (__backtrace): Setup expected frame pointer address for signal handling.
* Build divdi3 only for architecture that required itAdhemerval Zanella2017-04-061-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As noted in [1], divdi3 object is only exported in a handful ABIs (i386, m68k, powerpc32, s390-32, and ia64), however it is built for all current architectures regardless. This patch refact the make rules for this object to so only the aforementioned architectures that actually require it builds it. Also, to avoid internal PLT calls to the exported symbol from the module, glibc uses an internal header (symbol-hacks.h) which is unrequired (and in fact breaks the build for architectures that intend to get symbol definitions from libgcc.a). The patch also changes it to create its own header (divdi3-symbol-hacks.h) and adjust the architectures that require it accordingly. I checked the build/check (with run-built-tests=no) on the following architectures (which I think must cover all supported ABI/builds) using GCC 6.3: aarch64-linux-gnu alpha-linux-gnu arm-linux-gnueabihf hppa-linux-gnu ia64-linux-gnu m68k-linux-gnu microblaze-linux-gnu mips64-n32-linux-gnu mips-linux-gnu mips64-linux-gnu nios2-linux-gnu powerpc-linux-gnu powerpc-linux-gnu-power4 powerpc64-linux-gnu powerpc64le-linux-gnu s390x-linux-gnu s390-linux-gnu sh4-linux-gnu sh4-linux-gnu-soft sparc64-linux-gnu sparcv9-linux-gnu tilegx-linux-gnu tilegx-linux-gnu-32 tilepro-linux-gnu x86_64-linux-gnu x86_64-linux-gnu-x32 i686-linux-gnu I only saw one regression on sparcv9-linux-gnu (extra PLT call to .udiv) which I address in next patch in the set. It also correctly build SH with GCC 7.0.1 (without any regression from c89721e25d). [1] https://sourceware.org/ml/libc-alpha/2017-03/msg00243.html * sysdeps/i386/symbol-hacks.h: New file. * sysdeps/m68k/symbol-hacks.h: New file. * sysdeps/powerpc/powerpc32/symbol-hacks.h: New file. * sysdeps/s390/s390-32/symbol-hacks.h: New file. * sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = csu] (sysdep_routines): New rule: divdi3 object. [$(subdir) = csu] (sysdep-only-routines): Likewise. [$(subdir) = csu] (CFLAGS-divdi3.c): Likewise. * sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = csu] (sysdep_routines): Likewise. [$(subdir) = csu] (sysdep-only-routines): Likewise. [$(subdir) = csu] (CFLAGS-divdi3.c): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile [$(subdir) = csu] (sysdep_routines): Likewise. [$(subdir) = csu] (sysdep-only-routines): Likewise. [$(subdir) = csu] (CFLAGS-divdi3.c): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Makefile [$(subdir) = csu] (sysdep_routines): Likewise. [$(subdir) = csu] (sysdep-only-routines): Likewise. [$(subdir) = csu] (CFLAGS-divdi3.c): Likewise. * sysdeps/wordsize-32/Makefile: Remove file. * sysdeps/wordsize-32/symbol-hacks.h: Definitions move to ... * sysdeps/wordsize-32/divdi3-symbol-hacks.h: ... here.
* Move wrappers to libm-compat-calls-autoGabriel F. T. Gomes2017-01-0411-10/+7
| | | | | | | | | | This commit moves one step towards the deprecation of wrappers that use _LIB_VERSION / matherr / __kernel_standard functionality, by adding the suffix '_compat' to their filenames and adjusting Makefiles and #includes accordingly. New template wrappers that do not use such functionality will be added by future patches and will be first used by the float128 wrappers.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-01330-330/+330
|
* powerpc: Fix powerpc32/power7 memchr for large input sizesTulio Magno Quites Machado Filho2016-12-281-1/+10
| | | | | | | | | The same error fixed in commit b224637928e9fc04e3cef3e10d02ccf042d01584 happens in the 32-bit implementation of memchr for power7. This patch adopts the same solution, with a minimal change: it implements a saturated addition where overflows sets the maximum pointer size to UINTPTR_MAX.
* powerpc: Remove f{max,min}{f} assembly implementationsAdhemerval Zanella2016-12-272-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the powerpc assembly implementation of fmax/fmin. Based on benchtests, the assembly ones shows: $ ./testrun.sh benchtests/bench-fmax "fmax": { "": { "duration": 5.07586e+09, "iterations": 2.01676e+09, "max": 1350.39, "min": 2.073, "mean": 2.51684 }, "qNaN": { "duration": 5.09315e+09, "iterations": 8.4568e+08, "max": 2788, "min": 5.806, "mean": 6.02255 }, "sNaN": { "duration": 5.09073e+09, "iterations": 8.42316e+08, "max": 4215.84, "min": 5.737, "mean": 6.04373 } And $ ./testrun.sh benchtests/bench-fmin "fmin": { "": { "duration": 5.07711e+09, "iterations": 2.02982e+09, "max": 497.094, "min": 2.073, "mean": 2.50126 }, "qNaN": { "duration": 5.09134e+09, "iterations": 8.46968e+08, "max": 2255.14, "min": 5.807, "mean": 6.01125 }, "sNaN": { "duration": 5.09122e+09, "iterations": 8.4746e+08, "max": 1969.38, "min": 5.729, "mean": 6.00763 } } The default implementation (math/s_f{max.min}_template.c) shows slight better latency for all cases: $ ./testrun.sh benchtests/bench-fmax "fmax": { "": { "duration": 5.07044e+09, "iterations": 2.38695e+09, "max": 2048.58, "min": 2.073, "mean": 2.12423 }, "qNaN": { "duration": 5.09004e+09, "iterations": 9.45428e+08, "max": 3306.93, "min": 5.138, "mean": 5.38385 }, "sNaN": { "duration": 5.08458e+09, "iterations": 1.15959e+09, "max": 972.008, "min": 3.321, "mean": 4.3848 } } And: $ ./testrun.sh benchtests/bench-fmin "fmin": { "": { "duration": 5.06817e+09, "iterations": 2.3913e+09, "max": 1177.9, "min": 2.073, "mean": 2.11942 }, "qNaN": { "duration": 5.08857e+09, "iterations": 9.45656e+08, "max": 2658.83, "min": 5.09, "mean": 5.38099 }, "sNaN": { "duration": 5.08093e+09, "iterations": 1.16725e+09, "max": 1030.74, "min": 3.323, "mean": 4.3529 } } Both were run with GCC 5.4 (ubuntu 16 default installation) using default compiler flags on POWER8E 3.4GHz (powerpc64le-linux-gnu).
* powerpc: Add hidden definition for __sigsetjmpFlorian Weimer2016-11-292-0/+2
| | | | | There already is a hidden prototype for __sigsetjmp, but the architecture-specific definition was missing.
* powerpc: Remove unintended __longjmp symbol from ABIFlorian Weimer2016-11-291-3/+1
| | | | | | | | The __longjmp symbol was left in accidentally. It is not exported through a Versions file, but through a .symver assembler directive. The corresponding exported symbol was removed from the non-fpu powerpc64 targets in commit 9b9ef823581ecee546653d6ac3fd335f7b79faca.
* Define wordsize.h macros everywhereSteve Ellcey2016-11-041-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * bits/wordsize.h: Add documentation. * sysdeps/aarch64/bits/wordsize.h : New file * sysdeps/generic/stdint.h (PTRDIFF_MIN, PTRDIFF_MAX): Update definitions. (SIZE_MAX): Change ifdef to if in __WORDSIZE32_SIZE_ULONG check. * sysdeps/gnu/bits/utmp.h (__WORDSIZE_TIME64_COMPAT32): Check with #if instead of #ifdef. * sysdeps/gnu/bits/utmpx.h (__WORDSIZE_TIME64_COMPAT32): Ditto. * sysdeps/mips/bits/wordsize.h (__WORDSIZE32_SIZE_ULONG, __WORDSIZE32_PTRDIFF_LONG, __WORDSIZE_TIME64_COMPAT32): Add or change defines. * sysdeps/powerpc/powerpc32/bits/wordsize.h: Likewise. * sysdeps/powerpc/powerpc64/bits/wordsize.h: Likewise. * sysdeps/s390/s390-32/bits/wordsize.h: Likewise. * sysdeps/s390/s390-64/bits/wordsize.h: Likewise. * sysdeps/sparc/sparc32/bits/wordsize.h: Likewise. * sysdeps/sparc/sparc64/bits/wordsize.h: Likewise. * sysdeps/tile/tilegx/bits/wordsize.h: Likewise. * sysdeps/tile/tilepro/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: Likewise. * sysdeps/wordsize-32/bits/wordsize.h: Likewise. * sysdeps/wordsize-64/bits/wordsize.h: Likewise. * sysdeps/x86/bits/wordsize.h: Likewise.
* Fix cmpli usage in power6 memset.Joseph Myers2016-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Building glibc for powerpc64 with recent (2.27.51.20161012) binutils, with multi-arch enabled, I get the error: ../sysdeps/powerpc/powerpc64/power6/memset.S: Assembler messages: ../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: operand out of range (5 is not between 0 and 1) ../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: operand out of range (128 is not between 0 and 31) ../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: missing operand Indeed, cmpli is documented as a four-operand instruction, and looking at nearby code it seems likely cmpldi was intended. This patch fixes this powerpc64 code accordingly, and makes a corresponding change to the powerpc32 code. Tested for powerpc, powerpc64 and powerpc64le by Tulio Magno Quites Machado Filho * sysdeps/powerpc/powerpc32/power6/memset.S (memset): Use cmplwi instead of cmpli. * sysdeps/powerpc/powerpc64/power6/memset.S (memset): Use cmpldi instead of cmpli.
* Stop powerpc copysignl raising "invalid" for sNaN argument (bug 20718).Joseph Myers2016-10-191-3/+20
| | | | | | | | | | | | | | | | | | | | | | The powerpc (hard-float) implementations of copysignl, both 32-bit and 64-bit, raise spurious "invalid" exceptions when the first argument is a signaling NaN. copysign functions should never raise exceptions even for signaling NaNs. The problem is the use of an fcmpu instruction to test the sign of the high part of the long double argument. This patch fixes the functions to use fsel instead (as used for fabsl following my fixes for a similar bug there), or to examine the integer representation for older 32-bit processors without fsel. Tested for powerpc64 and powerpc32 (configurations with and without fsel used). [BZ #20718] * sysdeps/powerpc/powerpc32/fpu/s_copysignl.S (__copysignl): Do not use floating-point comparisons to test sign. * sysdeps/powerpc/powerpc64/fpu/s_copysignl.S (__copysignl): Likewise.
* powerpc32: make PLT call in _mcount compatible with -msecure-plt (bug 20554)Alan Modra2016-10-091-3/+24
|
* Use gcc attribute ifunc in libc_ifunc macro instead of inline assembly due ↵Stefan Liebler2016-10-0716-86/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to false debuginfo. The current s390 ifunc resolver for vector optimized functions and the common libc_ifunc macro in include/libc-symbols.h uses something like that to generate ifunc'ed functions: extern void *__resolve___strlen(unsigned long int dl_hwcap) asm (strlen); asm (".type strlen, %gnu_indirect_function"); This leads to false debug information: objdump --dwarf=info libc.so: ... <1><1e6424>: Abbrev Number: 43 (DW_TAG_subprogram) <1e6425> DW_AT_external : 1 <1e6425> DW_AT_name : (indirect string, offset: 0x1146e): __resolve___strlen <1e6429> DW_AT_decl_file : 1 <1e642a> DW_AT_decl_line : 23 <1e642b> DW_AT_linkage_name: (indirect string, offset: 0x1147a): strlen <1e642f> DW_AT_prototyped : 1 <1e642f> DW_AT_type : <0x1e4ccd> <1e6433> DW_AT_low_pc : 0x998e0 <1e643b> DW_AT_high_pc : 0x16 <1e6443> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <1e6445> DW_AT_GNU_all_call_sites: 1 <1e6445> DW_AT_sibling : <0x1e6459> <2><1e6449>: Abbrev Number: 44 (DW_TAG_formal_parameter) <1e644a> DW_AT_name : (indirect string, offset: 0x1845): dl_hwcap <1e644e> DW_AT_decl_file : 1 <1e644f> DW_AT_decl_line : 23 <1e6450> DW_AT_type : <0x1e4c8d> <1e6454> DW_AT_location : 0x122115 (location list) ... The debuginfo for the ifunc-resolver function contains the DW_AT_linkage_name field, which names the real function name "strlen". If you perform an inferior function call to strlen in lldb, then it fails due to something like that: "error: no matching function for call to 'strlen' candidate function not viable: no known conversion from 'const char [6]' to 'unsigned long' for 1st argument" The unsigned long is the dl_hwcap argument of the resolver function. The strlen function itself has no debufinfo. The s390 ifunc resolver for memset & co uses something like that: asm (".globl FUNC" ".type FUNC, @gnu_indirect_function" ".set FUNC, __resolve_FUNC"); This way the debuginfo for the ifunc-resolver function does not conain the DW_AT_linkage_name field and the real function has no debuginfo, too. Using this strategy for the vector optimized functions leads to some troubles for functions like strnlen. Here we have __strnlen and a weak alias strnlen. The __strnlen function is the ifunc function, which is realized with the asm- statement above. The weak_alias-macro can't be used here due to undefined symbol: gcc ../sysdeps/s390/multiarch/strnlen.c -c ... In file included from <command-line>:0:0: ../sysdeps/s390/multiarch/strnlen.c:28:24: error: ‘strnlen’ aliased to undefined symbol ‘__strnlen’ weak_alias (__strnlen, strnlen) ^ ./../include/libc-symbols.h:111:26: note: in definition of macro ‘_weak_alias’ extern __typeof (name) aliasname __attribute__ ((weak, alias (#name))); ^ ../sysdeps/s390/multiarch/strnlen.c:28:1: note: in expansion of macro ‘weak_alias’ weak_alias (__strnlen, strnlen) ^ make[2]: *** [build/string/strnlen.o] Error 1 As the __strnlen function is defined with asm-statements the function name __strnlen isn't known by gcc. But the weak alias can also be done with an asm statement to resolve this issue: __asm__ (".weak strnlen\n\t" ".set strnlen,__strnlen\n"); In order to use the weak_alias macro, gcc needs to know the ifunc function. The minimum gcc to build glibc is currently 4.7, which supports attribute((ifunc)). See https://gcc.gnu.org/onlinedocs/gcc-4.7.0/gcc/Function-Attributes.html. It is only supported if gcc is configured with --enable-gnu-indirect-function or gcc supports it by default for at least intel and s390x architecture. This patch uses the old behaviour if gcc support is not available. Usage of attribute ifunc is something like that: __typeof (FUNC) FUNC __attribute__ ((ifunc ("__resolve_FUNC"))); Then gcc produces the same .globl, .type, .set assembler instructions like above. And the debuginfo does not contain the DW_AT_linkage_name field and there is no debuginfo for the real function, too. But in order to get it work, there is also some extra work to do. Currently, the glibc internal symbol on s390x e.g. __GI___strnlen is not the ifunc symbol, but the fallback __strnlen_c symbol. Thus I have to omit the libc_hidden_def macro in strnlen.c (here is the ifunc function __strnlen) because it is already handled in strnlen-c.c (here is __strnlen_c). Due to libc_hidden_proto (__strnlen) in string.h, compiling fails: gcc ../sysdeps/s390/multiarch/strnlen.c -c ... In file included from <command-line>:0:0: ../sysdeps/s390/multiarch/strnlen.c:53:24: error: ‘strnlen’ aliased to undefined symbol ‘__strnlen’ weak_alias (__strnlen, strnlen) ^ ./../include/libc-symbols.h:111:26: note: in definition of macro ‘_weak_alias’ extern __typeof (name) aliasname __attribute__ ((weak, alias (#name))); ^ ../sysdeps/s390/multiarch/strnlen.c:53:1: note: in expansion of macro ‘weak_alias’ weak_alias (__strnlen, strnlen) ^ make[2]: *** [build/string/strnlen.os] Error 1 I have to redirect the prototypes for __strnlen in string.h and create a copy of the prototype for using as ifunc function: __typeof (__redirect___strnlen) __strnlen __attribute__ ((ifunc ("__resolve_strnlen"))); weak_alias (__strnlen, strnlen) This way there is no trouble with the internal __GI_* symbols. Glibc builds fine with this construct and the debuginfo is "correct". For functions without a __GI_* symbol like memccpy this redirection is not needed. This patch adjusts the common libc_ifunc and libm_ifunc macro to use gcc attribute ifunc. Due to this change, the macro users where the __GI_* symbol does not target the ifunc symbol have to be prepared with the redirection construct. Furthermore a configure check to test gcc support is added. If it is not supported, the old behaviour is used. This patch also prepares the libc_ifunc macro to be useable in s390-ifunc-macro. The s390 ifunc-resolver-functions do have an hwcaps parameter and not all resolvers need the same initialization code. The next patch in this series changes the s390 ifunc macros to use this common one. ChangeLog: * include/libc-symbols.h (__ifunc_resolver): New macro is used by __ifunc* macros. (__ifunc): New macro uses gcc attribute ifunc or inline assembly depending on HAVE_GCC_IFUNC. (libc_ifunc, libm_ifunc): Use __ifunc as base macro. (libc_ifunc_redirected, libc_ifunc_hidden, libm_ifunc_init): New macro. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite.c: Redirect ifunced function in header for using as type for ifunc function. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strstr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf.c: Add libc_hidden_def() and use libc_ifunc_hidden() macro instead of libc_ifunc() macro. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnanf.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Likewise.
* powerpc: Fix POWER9 impliesTulio Magno Quites Machado Filho2016-09-191-1/+1
| | | | | Fix multiarch build for POWER9 by correcting the order of the directories listed at sysnames configure variable.
* Add e500 version of fetestexceptflag.Joseph Myers2016-09-071-0/+25
| | | | | | | | | | | | | | | When I added fetestexceptflag, I missed that e500 was another case that needed its own version because saved exceptions were not directly stored in a form that could be ANDed with exception bits (they were stored with exceptions in SPE form, but the FE_* macros always use the classic hard-float form). This patch adds an e500 version with the required call to __fexcepts_from_spe to convert from one form to the other. Tested for e500. * sysdeps/powerpc/powerpc32/e500/nofpu/fetestexceptflag.c: New file.
* Add femode_t functions: powerpc.Joseph Myers2016-09-072-0/+80
| | | | | | | | | | | This patch adds PowerPC versions of fegetmode and fesetmode. * sysdeps/powerpc/fpu/fegetmode.c: New file. * sysdeps/powerpc/fpu/fesetmode.c: Likewise. * sysdeps/powerpc/nofpu/fegetmode.c: Likewise. * sysdeps/powerpc/nofpu/fesetmode.c: Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fegetmode.c: Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fesetmode.c: Likewise.
* Add femode_t functions.Joseph Myers2016-09-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Add fesetexcept: powerpc.Joseph Myers2016-08-161-0/+37
| | | | | | | | This patch adds PowerPC versions of fesetexcept. * sysdeps/powerpc/fpu/fesetexcept.c: New file. * sysdeps/powerpc/nofpu/fesetexcept.c: Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fesetexcept.c: Likewise.
* ppc: Fix modf (sNaN) for pre-POWER5+ CPU (bug 20240).Aurelien Jarno2016-07-081-0/+5
| | | | | | | | | | | | | | | | Commit a6a4395d fixed modf implementation by compiling s_modf.c and s_modff.c with -fsignaling-nans. However these files are also included from the pre-POWER5+ implementation, and thus these files should also be compiled with -fsignaling-nans. Changelog: [BZ #20240] * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile (CFLAGS-s_modf-ppc32.c): New variable. (CFLAGS-s_modff-ppc32.c): Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (CFLAGS-s_modf-ppc64.c): Likewise. (CFLAGS-s_modff-ppc64.c): Likewise.
* Remove atomic_compare_and_exchange_bool_rel.Torvald Riegel2016-06-241-19/+0
| | | | | | | | | | | | | | | | | | | | | | | | atomic_compare_and_exchange_bool_rel and catomic_compare_and_exchange_bool_rel are removed and replaced with the new C11-like atomic_compare_exchange_weak_release. The concurrent code in nscd/cache.c has not been reviewed yet, so this patch does not add detailed comments. * nscd/cache.c (cache_add): Use new C11-like atomic operation instead of atomic_compare_and_exchange_bool_rel. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise. * include/atomic.h (atomic_compare_and_exchange_bool_rel, catomic_compare_and_exchange_bool_rel): Remove. * sysdeps/aarch64/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/alpha/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/arm/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/mips/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise. * sysdeps/tile/atomic-machine.h (atomic_compare_and_exchange_bool_rel): Likewise.
* Use generic fdim on more architectures (bug 6796, bug 20255, bug 20256).Joseph Myers2016-06-141-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some architectures have their own versions of fdim functions, which are missing errno setting (bug 6796) and may also return sNaN instead of qNaN for sNaN input, in the case of the x86 / x86_64 long double versions (bug 20256). These versions are not actually doing anything that a compiler couldn't generate, just straightforward comparisons / arithmetic (and, in the x86 / x86_64 case, testing for NaNs with fxam, which isn't actually needed once you use an unordered comparison and let the NaNs pass through the same subtraction as non-NaN inputs). This patch removes the x86 / x86_64 / powerpc versions, so that those architectures use the generic C versions, which correctly handle setting errno and deal properly with sNaN inputs. This seems better than dealing with setting errno in lots of .S versions. The i386 versions also return results with excess range and precision, which is not appropriate for a function exactly defined by reference to IEEE operations. For errno setting to work correctly on overflow, it's necessary to remove excess range with math_narrow_eval, which this patch duly does in the float and double versions so that the tests can reliably pass on x86. For float, this avoids any double rounding issues as the long double precision is more than twice that of float. For double, double rounding issues will need to be addressed separately, so this patch does not fully fix bug 20255. Tested for x86_64, x86 and powerpc. [BZ #6796] [BZ #20255] [BZ #20256] * math/s_fdim.c: Include <math_private.h>. (__fdim): Use math_narrow_eval on result. * math/s_fdimf.c: Include <math_private.h>. (__fdimf): Use math_narrow_eval on result. * sysdeps/i386/fpu/s_fdim.S: Remove file. * sysdeps/i386/fpu/s_fdimf.S: Likewise. * sysdeps/i386/fpu/s_fdiml.S: Likewise. * sysdeps/i386/i686/fpu/s_fdim.S: Likewise. * sysdeps/i386/i686/fpu/s_fdimf.S: Likewise. * sysdeps/i386/i686/fpu/s_fdiml.S: Likewise. * sysdeps/powerpc/fpu/s_fdim.c: Likewise. * sysdeps/powerpc/fpu/s_fdimf.c: Likewise. * sysdeps/powerpc/powerpc32/fpu/s_fdim.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/s_fdim.c: Likewise. * sysdeps/x86_64/fpu/s_fdiml.S: Likewise. * math/libm-test.inc (fdim_test_data): Expect errno setting on overflow. Add sNaN tests.
* Fix powerpc32 ceil, rint etc. on sNaN input (bug 20160).Joseph Myers2016-05-2712-12/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc32 versions of ceil, floor, round, trunc, rint, nearbyint and their float versions return sNaN for sNaN input when they should return qNaN. This patch fixes them to add a NaN argument to itself to quiet sNaNs before returning. The powerpc64 versions, which have the same bug, will be addressed separately. Tested for powerpc32. [BZ #20160] * sysdeps/powerpc/powerpc32/fpu/s_ceil.S (__ceil): Add NaN argument to itself before returning the result. * sysdeps/powerpc/powerpc32/fpu/s_ceilf.S (__ceilf): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_floor.S (__floor): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_floorf.S (__floorf): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_rint.S (__rint): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_rintf.S (__rintf): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_round.S (__round): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_roundf.S (__roundf): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_trunc.S (__trunc): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_truncf.S (__truncf): Likewise.
* Avoid "invalid" exceptions from powerpc fabsl (sNaN) (bug 20157).Joseph Myers2016-05-271-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc implementations of fabsl for ldbl-128ibm (both powerpc32 and powerpc64) wrongly raise the "invalid" exception for sNaN arguments. fabs functions should be quiet for all inputs including signaling NaNs. The problem is the use of a comparison instruction fcmpu to determine if the high part of the argument is negative and so the low part needs to be negated; such instructions raise "invalid" for sNaNs. There is a pure integer implementation of fabsl in sysdeps/ieee754/ldbl-128ibm/s_fabsl.c. However, it's not necessary to use it to avoid such exceptions. The fsel instruction does not raise exceptions for sNaNs, and can be used in place of the original comparison. (Note that if the high part is zero or a NaN, it does not matter whether the low part is negated; the choice of whether the low part of a zero is +0 or -0 does not affect the value, and the low part of a NaN does not affect the value / payload either.) The condition in GCC for fsel to be available is TARGET_PPC_GFXOPT, corresponding to the _ARCH_PPCGR predefined macro. fsel is available on all 64-bit processors supported by GCC. A few 32-bit processors supported by GCC do not have TARGET_PPC_GFXOPT despite having hard float support. To support those processors, integer code (similar to that in copysignl) is included for the !_ARCH_PPCGR case for powerpc32. Tested for powerpc32 (configurations with and without _ARCH_PPCGR) and powerpc64. [BZ #20157] * sysdeps/powerpc/powerpc32/fpu/s_fabsl.S (__fabsl): Use fsel to determine whether to negate low half if [_ARCH_PPCGR], and integer comparison otherwise. * sysdeps/powerpc/powerpc64/fpu/s_fabsl.S (__fabsl): Use fsel to determine whether to negate low half.
* Do not raise "inexact" from powerpc32 ceil, floor, trunc (bug 15479).Joseph Myers2016-05-256-18/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing fixes for ceil, floor and trunc functions not to raise the "inexact" exception, this patch fixes the versions used on older powerpc32 processors. As was done with the round implementations some time ago, the save of floating-point state is moved after the first floating-point operation on the input to ensure that any "invalid" exception from signaling NaN input is included in the saved state, and then the whole state gets restored rather than just the rounding mode. This has no effect on configurations using the power5+ code, since such processors can do these operations with a single instruction (and those instructions do not set "inexact", so are correct for TS 18661-1 semantics). Tested for powerpc32. [BZ #15479] * sysdeps/powerpc/powerpc32/fpu/s_ceil.S (__ceil): Move save of floating-point state after first floating-point operation on input. Restore full floating-point state instead of just rounding mode. * sysdeps/powerpc/powerpc32/fpu/s_ceilf.S (__ceilf): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_floor.S (__floor): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_floorf.S (__floorf): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_trunc.S (__trunc): Likewise. * sysdeps/powerpc/powerpc32/fpu/s_truncf.S (__truncf): Likewise.
* powerpc: Rearrange cfi_offset callsRajalakshmi Srinivasaraghavan2016-03-113-13/+13
| | | | | This patch rearranges cfi_offset() calls after the last store so as to avoid extra DW_CFA_advance opcodes in unwind information.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-04326-326/+326
|
* powerpc: Add basic support for POWER9 sans hwcap.Carlos Eduardo Seo2015-12-223-0/+4
| | | | This patch adds the minimum changes for supporting the POWER9 processor.
* powerpc: Add hwcap/hwcap2/platform data to TCB.Carlos Eduardo Seo2015-12-031-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new feature for powerpc. In order to get faster access to the HWCAP/HWCAP2 bits and platform number (i.e. for implementing __builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of reading from the auxiliary vector, we now reserve space for them in the TCB. This is an ABI change for GLIBC 2.23. A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to get the data from the auxiliary vector and parse it, and store it for later use in the TLS initialization code. This function is called very early (in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and in __libc_start_main () for the static linking case) to make sure the data is available at the time of TLS initialization. * sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo. (sysdep_routines): Likewise. (sysdep-rtld-routines): Likewise. [$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static [$(subdir) = nptl](tests-static): test-get_hwcap-static * sysdeps/powerpc/Versions: Added new __parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23. * sysdeps/powerpc/hwcapinfo.c: New file. (__tcb_parse_hwcap_and_convert_at_platform): New function to initialize and parse hwcap, hwcap2 and platform number information. * sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables to store HWCAP+HWCAP2 and platform number. * sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets for HWCAP+HWCAP2 and platform number in the TCB. * sysdeps/powerpc/nptl/tls.h: New functionality. Stores the HWCAP, HWCAP2 and platform number in the TCB. (dtv): Added new fields for HWCAP+HWCAP2 and platform number. (TLS_INIT_TP): Included calls to add the hwcap and at_platform values in the TCB in TP initialization. (TLS_DEFINE_INIT_TP): Likewise. (THREAD_GET_HWCAP): New macro. (THREAD_SET_HWCAP): Likewise. (THREAD_GET_AT_PLATFORM): Likewise. (THREAD_SET_AT_PLATFORM): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h: (dl_platform_init): New function that calls __parse_hwcap_and_convert_at_platform for the dymanic linking case for powerpc32. * sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64. * sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for this functionality, static linking case. * sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic linking case. * sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to __parse_hwcap_and_convert_at_platform for the static linking case. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Included the new __parse_hwcap_and_convert_at_platform symbol in the ABI list for GLIBC 2.23. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise.
* Fix powerpc round, roundf spurious "inexact" (bug 19238).Joseph Myers2015-11-122-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc hard-float round and roundf functions, both 32-bit and 64-bit, raise spurious "inexact" exceptions for integer arguments from adding 0.5 and rounding to integer toward zero. Since these functions already save and restore the rounding mode, it's natural to make them restore the full floating-point state instead to fix this bug, which this patch does. The save of the state is moved after the first floating-point operation on the input so that any "invalid" exceptions from signaling NaN inputs are properly preserved. As a consequence of this approach to the fix, "inexact" for noninteger arguments (disallowed by TS 18661-1 but not by C99/C11, see bug 15479) is also avoided for these implementations; this is *not* a general fix for bug 15479 since plenty of other implementations of various functions still raise spurious "inexact" for noninteger arguments. This issue and fix do not apply to builds using power5+ versions of round and roundf, which use the frin instruction and avoid "inexact" exceptions that way. This patch should get hard-float powerpc32 and powerpc64 (default function implementations) back to a state where test-float and test-double will pass after ulps regeneration. Tested for powerpc32 and powerpc64. [BZ #15479] [BZ #19238] * sysdeps/powerpc/powerpc32/fpu/s_round.S (__round): Save floating-point state after first operation on input. Restore full state rather than just rounding mode. * sysdeps/powerpc/powerpc32/fpu/s_roundf.S (__roundf): Likewise. * sysdeps/powerpc/powerpc64/fpu/s_round.S (__round): Likewise. * sysdeps/powerpc/powerpc64/fpu/s_roundf.S (__roundf): Likewise.
* Fix powerpc nearbyint wrongly clearing "inexact" and leaving traps disabled ↵Joseph Myers2015-11-112-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (bug 19228). Similar to bug 15491 recently fixed for x86_64 / x86, the powerpc (both powerpc32 and powerpc64) hard-float implementations of nearbyintf and nearbyint wrongly clear an "inexact" exception that was raised before the function was called; this shows up as failure of the test math/test-nearbyint-except added when that bug was fixed. They also wrongly leave traps on "inexact" disabled if they were enabled before the function was called. This patch fixes the bugs similar to how the x86 bug was fixed: saving and restoring the whole floating-point state, both to restore the original "inexact" flag state and to restore the original state of whether traps on "inexact" were enabled. Because there's a convenient point in the powerpc implementations to save state after any sNaN arguments will have raised "invalid" but before "inexact" traps need to be disabled, no special handling for "invalid" is needed as in the x86 version. Tested for powerpc64 and powerpc32, where it fixes the math/test-nearbyint-except failure as well as fixing the new test math/test-nearbyint-except-2 added by this patch. Also tested for x86_64 and x86 that the new test passes. If powerpc experts see a more efficient way of doing this (e.g. instruction positioning that's better for pipelines on typical processors) then of course followups optimizing the fix are welcome. [BZ #19228] * sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint): Save and restore full floating-point state. * sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf): Likewise. * sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S (__nearbyint): Likewise. * sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S (__nearbyintf): Likewise. * math/test-nearbyint-except-2.c: New file. * math/Makefile (tests): Add test-nearbyint-except-2.
* Fix powerpc32 lround, lroundf spurious exceptions (bug 19134).Joseph Myers2015-10-141-2/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc32 implementation of lround and lroundf can produce spurious exceptions from adding 0.5 then converting to integer. This includes "inexact" from the conversion to integer (not allowed for integer arguments to these functions), and, for larger integer arguments, "inexact", and "overflow" when rounding upward, from the addition. In addition, "inexact" is not allowed together with "invalid" and so inexact addition must be avoided when the integer will be out of range of 32-bit long, whether or not the argument is an integer. This patch fixes these problems. As in the powerpc64 llround implementation, a check is added for too-large arguments; in the powerpc64 case that means arguments at least 2^52 in magnitude (so that 0.5 cannot be added exactly), while in this case it means arguments for which the result would overflow "long". In those cases a suitable overflowing value is used for the integer conversion without adding 0.5, while for smaller arguments it's tested whether the argument is an integer (by adding and subtracting 2^52 to the absolute value and comparing with the original absolute value) to avoid adding 0.5 to integers and generating spurious "inexact". This code is not used when the power5+ sysdeps directories are used, as there's a separate power5+ version of these functions.. Tested for powerpc. This gets test-float (for a default powerpc32 hard-float build without any --with-cpu) back to the point where it should pass once powerpc ulps are regenerated; test-double still needs another problem with exceptions fixed to get back to that point (and I haven't looked lately at what default powerpc64 results are like). [BZ #19134] * sysdeps/powerpc/powerpc32/fpu/s_lround.S (.LC1): New object. (.LC2): Likewise. (.LC3): Likewise. (__lround): Do not add 0.5 to integer or out-of-range arguments.
* Fix powerpc32 llround, llroundf exceptions (bug 19125).Joseph Myers2015-10-132-2/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc32 implementations of llroundf and llround produce spurious and missing exceptions (some arising from such exceptions from conversions to long long, some present even when fctidz is used). This patch fixes those problems in a similar way to the llrint / llrintf fixes. The spurious exceptions in the fctidz case for large arguments arise from a converted value that saturated as LLONG_MAX being converted back to float or double (the conversion back being inexact, but "inexact" must not be raised together with "invalid"), and from the subtraction x - xrf also being inexact for sufficiently large arguments (whether the saturation was to LLONG_MAX or LLONG_MIN); those are fixed by returning early if the argument is large enough that no rounding is needed. This code is not used for --with-cpu=power4 builds (I suspect the code used in that case may also produce spurious "inexact" exceptions, but that's something to investigate later). Tested for powerpc. [BZ #19125] * sysdeps/powerpc/powerpc32/fpu/s_llround.c: Include <limits.h>, <math_private.h> and <stdint.h>. (__llround): Avoid conversions to and from long long int, and subtractions, where those might raise spurious exceptions. * sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: Include <math_private.h> and <stdint.h>. (__llroundf): Avoid conversions to and from long long int, and subtractions, where those might raise spurious exceptions.
* Move powerpc llround implementations to powerpc32 directory.Joseph Myers2015-10-132-0/+96
| | | | | | | | | | | | | | | | | sysdeps/powerpc/fpu/ has versions of llround and llroundf that are actually used only for powerpc32 because sysdeps/powerpc/powerpc64/fpu/ has its own versions of those functions. This patch moves them into sysdeps/powerpc/powerpc32/fpu to reflect where they are actually used (in preparation for fixing other problems with those functions). Tested for powerpc that installed stripped shared libraries are unchanged by this patch. * sysdeps/powerpc/fpu/s_llround.c: Move to .... * sysdeps/powerpc/powerpc32/fpu/s_llround.c: ...here. * sysdeps/powerpc/fpu/s_llroundf.c: Move to .... * sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: ...here.
* Fix powerpc32 llrint, llrintf bad exceptions (bug 16422).Joseph Myers2015-10-134-2/+94
| | | | | | | | | | | | | | | | | | | | | | | | | The versions of llrint and llrintf for older powerpc32 processors convert the results of __rint / __rintf to long long int, resulting in spurious exceptions from such casts in certain cases. This patch makes glibc work around the problems with the libgcc conversions when the compiler used to build glibc doesn't use the fctidz instruction for them. Tested for powerpc. [BZ #16422] * sysdeps/powerpc/powerpc32/fpu/configure.ac (libc_cv_ppc_fctidz): New configure test. * sysdeps/powerpc/powerpc32/fpu/configure: Regenerated. * config.h.in [_LIBC] (HAVE_PPC_FCTIDZ): New macro. * sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include <limits.h>, <math_private.h> and <stdint.h>. (__llrint): Avoid conversions to long long int where those might raise spurious exceptions. * sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include <math_private.h> and <stdint.h>. (__llrintf): Avoid conversions to long long int where those might raise spurious exceptions.
* Work around powerpc32 integer 0 converting to -0 (bug 887, bug 19049, bug ↵Joseph Myers2015-10-053-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 19050). On powerpc32 hard-float, older processors (ones where fcfid is not available for 32-bit code), GCC generates conversions from integers to floating point that wrongly convert integer 0 to -0 instead of +0 in FE_DOWNWARD mode. This in turn results in logb and a few other functions wrongly returning -0 when they should return +0. This patch works around this issue in glibc as I proposed in <https://sourceware.org/ml/libc-alpha/2015-09/msg00728.html>, so that the affected functions can be correct and the affected tests pass in the absence of a GCC fix for this longstanding issue (GCC bug 67771 - if fixed, of course we can put in GCC version conditionals, and eventually phase out the workarounds). A new macro FIX_INT_FP_CONVERT_ZERO is added in a new sysdeps header fix-int-fp-convert-zero.h, and the powerpc32/fpu version of that header defines the macro based on the results of a configure test for whether such conversions use the fcfid instruction. Tested for x86_64 (that installed stripped shared libraries are unchanged by the patch) and powerpc (that HAVE_PPC_FCFID comes out to 0 as expected and that the relevant tests are fixed). Also tested a build with GCC configured for -mcpu=power4 and verified that HAVE_PPC_FCFID comes out to 1 in that case. There are still some other issues to fix to get test-float and test-double passing cleanly for older powerpc32 processors (apart from the need for an ulps regeneration for powerpc). (test-ldouble will be harder to get passing cleanly, but with a combination of selected fixes to ldbl-128ibm code that don't involve significant performance issues, allowing spurious underflow and inexact exceptions for that format, and lots of XFAILing for the default case of unpatched libgcc, it should be doable.) [BZ #887] [BZ #19049] [BZ #19050] * sysdeps/generic/fix-int-fp-convert-zero.h: New file. * sysdeps/ieee754/dbl-64/e_log10.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log10): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/e_log2.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log2): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/s_erf.c: Include <fix-int-fp-convert-zero.h>. (__erfc): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/dbl-64/s_logb.c: Include <fix-int-fp-convert-zero.h>. (__logb): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/e_log10f.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log10f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/e_log2f.c: Include <fix-int-fp-convert-zero.h>. (__ieee754_log2f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/s_erff.c: Include <fix-int-fp-convert-zero.h>. (__erfcf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/flt-32/s_logbf.c: Include <fix-int-fp-convert-zero.h>. (__logbf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include <fix-int-fp-convert-zero.h>. (__erfcl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/ieee754/ldbl-128ibm/s_logbl.c: Include <fix-int-fp-convert-zero.h>. (__logbl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO. * sysdeps/powerpc/powerpc32/fpu/configure.ac: New file. * sysdeps/powerpc/powerpc32/fpu/configure: New generated file. * sysdeps/powerpc/powerpc32/fpu/fix-int-fp-convert-zero.h: New file. * config.h.in [_LIBC] (HAVE_PPC_FCFID): New macro.
* Move bits/atomic.h to atomic-machine.h (bug 14912).Joseph Myers2015-09-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was noted in <https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the bits/*.h naming scheme should only be used for installed headers. This patch renames bits/atomic.h to atomic-machine.h to follow that convention. This is the only change in this series that needs to change the filename rather than simply removing a directory level (because both atomic.h and bits/atomic.h exist at present). Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). [BZ #14912] * sysdeps/aarch64/bits/atomic.h: Move to ... * sysdeps/aarch64/atomic-machine.h: ...here. (_AARCH64_BITS_ATOMIC_H): Rename macro to _AARCH64_ATOMIC_MACHINE_H. * sysdeps/alpha/bits/atomic.h: Move to ... * sysdeps/alpha/atomic-machine.h: ...here. * sysdeps/arm/bits/atomic.h: Move to ... * sysdeps/arm/atomic-machine.h: ...here. Update comments. * bits/atomic.h: Move to ... * sysdeps/generic/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/i386/bits/atomic.h: Move to ... * sysdeps/i386/atomic-machine.h: ...here. * sysdeps/ia64/bits/atomic.h: Move to ... * sysdeps/ia64/atomic-machine.h: ...here. * sysdeps/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ... * sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here. * sysdeps/microblaze/bits/atomic.h: Move to ... * sysdeps/microblaze/atomic-machine.h: ...here. * sysdeps/mips/bits/atomic.h: Move to ... * sysdeps/mips/atomic-machine.h: ...here. (_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H. * sysdeps/powerpc/bits/atomic.h: Move to ... * sysdeps/powerpc/atomic-machine.h: ...here. Update comments. * sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update comments. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ... * sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include <atomic-machine.h> instead of <bits/atomic.h>. * sysdeps/s390/bits/atomic.h: Move to ... * sysdeps/s390/atomic-machine.h: ...here. * sysdeps/sparc/sparc32/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ... * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here. * sysdeps/sparc/sparc64/bits/atomic.h: Move to ... * sysdeps/sparc/sparc64/atomic-machine.h: ...here. * sysdeps/tile/bits/atomic.h: Move to ... * sysdeps/tile/atomic-machine.h: ...here. * sysdeps/tile/tilegx/bits/atomic.h: Move to ... * sysdeps/tile/tilegx/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/tile/tilepro/bits/atomic.h: Move to ... * sysdeps/tile/tilepro/atomic-machine.h: ...here. Include <sysdeps/tile/atomic-machine.h> instead of <sysdeps/tile/bits/atomic.h>. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include <sysdeps/arm/atomic-machine.h> instead of <sysdeps/arm/bits/atomic.h>. * sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here. (_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here. (_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H. * sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ... * sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here. * sysdeps/x86_64/bits/atomic.h: Move to ... * sysdeps/x86_64/atomic-machine.h: ...here. * include/atomic.h: Include <atomic-machine.h> instead of <bits/atomic.h>.
* powerpc: Fix tabort usage in syscallsPaul E. Murphy2015-08-251-2/+2
| | | | | | | | | | | | | | | | | | | Fix usage of tabort in generated syscalls. r0 has special meaning when used with this instruction, thus it will not generate persistent errors, nor return an error code. This mitigates poor CPU usage when performing elided critical sections. Additionally, transactions should be aborted when entering a user invoked syscall. Otherwise the results of the transaction may be undefined. 2015-08-25 Paul E. Murphy <murphyp@linux.vnet.ibm.com> * sysdeps/powerpc/powerpc32/sysdep.h (ABORT_TRANSACTION): Use register other than r0 for tabort, it has special meaning. * sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION): Likewise * sysdeps/unix.sysv/linux/powerpc/syscall.S (syscall): Abort transaction before starting syscall.
* powerpc: Fix memchr for powerpc32.Carlos Eduardo Seo2015-08-211-1/+1
| | | | | | | Fix a wrong #undef in memchr.c. * sysdeps/powerpc/powerpc32/power4/multiarch/memchr.c: Replace '#undef memcpy' by '#undef memchr'.
* Use libc_hidden_proto / libc_hidden_def with __strnlen.Joseph Myers2015-06-023-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various code in glibc uses __strnlen instead of strnlen for namespace reasons. However, __strnlen does not use libc_hidden_proto / libc_hidden_def (as is normally done for any function defined and called within the same library, whether or not exported from the library and whatever namespace it is in), so the compiler does not know that those calls are to a function within libc. This patch uses libc_hidden_proto / libc_hidden_def with __strnlen. On x86_64, it makes no difference to the installed stripped shared libraries. On 32-bit x86, it causes __strnlen calls to go to the same place as strnlen calls (the fallback strnlen implementation), rather than through a PLT entry for the strnlen IFUNC; I'm not sure of the logic behind when calls from within libc should use IFUNCs versus when they should go direct to a particular function implementation, but clearly it doesn't make sense for strnlen and __strnlen to be handled differently in this regard. Tested for x86_64 and x86 (testsuite, and comparison of installed shared libraries as described above). * string/strnlen.c [!STRNLEN] (__strnlen): Use libc_hidden_def. * include/string.h (__strnlen): Use libc_hidden_proto. * sysdeps/aarch64/strnlen.S (__strnlen): Use libc_hidden_def. * sysdeps/i386/i686/multiarch/strnlen-c.c [SHARED] (libc_hidden_def): Define __GI___strnlen as well as __GI_strnlen. * sysdeps/powerpc/powerpc32/power4/multiarch/strnlen-power7.S (libc_hidden_def): Undefine and redefine. * sysdeps/powerpc/powerpc32/power4/multiarch/strnlen-ppc32.c [SHARED] (libc_hidden_def): Define __GI___strnlen as well as __GI_strnlen. * sysdeps/powerpc/powerpc32/power7/strnlen.S (__strnlen): Use libc_hidden_def. * sysdeps/tile/tilegx/strnlen.c (__strnlen): Likewise.
* libc-vdso.h place consolidationAdhemerval Zanella2015-04-201-1/+1
| | | | | | This patch moves the libc-vdso.h internal header from bits folder to default architecture one and also corrects the remaning includes in the files.
* powerpc: Fix __wcschr static buildAdhemerval Zanella2015-04-151-4/+14
| | | | | | | | | | | This patch fix the static build for strftime, which uses __wcschr. Current powerpc32 implementation defines the __wcschr be an alias to __wcschr_ppc32 and current implementation misses the correct alias for static build. It also changes the default wcschr.c logic so a IFUNC implementation should just define WCSCHR and undefine the required alias/internal definitions.
* powerpc __tls_get_addr call optimizationAlan Modra2015-03-251-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is glibc support for a PowerPC TLS optimization, inspired by Alexandre Oliva's TLS optimization for other processors, http://www.lsd.ic.unicamp.br/~oliva/writeups/TLS/RFC-TLSDESC-x86.txt In essence, this optimization uses a zero module id in the tls_index GOT entry to indicate that a TLS variable is allocated space in the static TLS area. A special plt call linker stub for __tls_get_addr checks for such a tls_index and if found, returns the offset immediately. The linker communicates the fact that the special __tls_get_addr stub is used by setting a bit in the dynamic tag DT_PPC64_OPT/DT_PPC_OPT. glibc communicates to the linker that this optimization is available by the presence of __tls_get_addr_opt. tst-tlsmod2.so is built with -Wl,--no-tls-get-addr-optimize for tst-tls-dlinfo, which otherwise would fail since it tests that no static tls is allocated. The ld option --no-tls-get-addr-optimize has been available since binutils-2.20 so doesn't need a configure test. * NEWS: Advertise TLS optimization. * elf/elf.h (R_PPC_TLSGD, R_PPC_TLSLD, DT_PPC_OPT, PPC_OPT_TLS): Define. (DT_PPC_NUM): Increment. * elf/dynamic-link.h (HAVE_STATIC_TLS): Define. (CHECK_STATIC_TLS): Use here. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Optimize TLS descriptors. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise. * sysdeps/powerpc/dl-tls.c: New file. * sysdeps/powerpc/Versions: Add __tls_get_addr_opt. * sysdeps/powerpc/tst-tlsopt-powerpc.c: New tls test. * sysdeps/unix/sysv/linux/powerpc/Makefile: Add new test. Build tst-tlsmod2.so with --no-tls-get-addr-optimize. * sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Update. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise.
* Remove HAVE_ASM_PPC_REL16 referencesAlan Modra2015-03-231-41/+3
| | | | | | | | | | | | | In bc0cdc498 the configure check for HAVE_ASM_PPC_REL16 was removed on the grounds that the minimum binutils supports rel16 relocs. This is true, but not all references to HAVE_ASM_PPC_REL16 in the sources were removed. * config.h.in: Remove HAVE_ASM_PPC_REL16. * sysdeps/powerpc/powerpc32/tls-macros.h: Remove HAVE_ASM_PPC_REL16 and false branch of conditional. * sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S: Likewise.
* Replace ELF_RTYPE_CLASS_NOCOPY with ELF_RTYPE_CLASS_COPYH.J. Lu2015-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELF_RTYPE_CLASS_NOCOPY in comments is a typo. It should be ELF_RTYPE_CLASS_COPY. [BZ #18082] * sysdeps/alpha/dl-machine.h (elf_machine_type_class): Replace ELF_RTYPE_CLASS_NOCOPY with ELF_RTYPE_CLASS_COPY in comments. * sysdeps/arm/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/hppa/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/i386/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/ia64/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/m68k/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/microblaze/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/nios2/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/s390/s390-32/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/s390/s390-64/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/sh/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/sparc/sparc32/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/sparc/sparc64/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/tile/dl-machine.h (elf_machine_type_class): Likewise. * sysdeps/x86_64/dl-machine.h (elf_machine_type_class): Likewise.
* powerpc: drop R_PPC_REL16 checkAdhemerval Zanella2015-02-102-44/+0
| | | | | Current minimum support binutils (2.22) supports R_PPC_REL16 as default, so no need to extra configure checks.
* powerpc: wordcopy/memmove cleanup for ppc32Adhemerval Zanella2015-02-096-115/+32
| | | | | | | | This patch cleanup some multiarch code related to memmmove optimization. Initial IFUNC support added specialized wordcopy symbols which turned in local IFUNC calls used by memmove default implementation. The patch removes the internal IFUNC for wordcopy symbols and uses local branches in the memmmove optimization instead.
* powerpc: multiarch Makefile cleanup for powerpc32Adhemerval Zanella2015-02-091-4/+10
| | | | | This patch cleanups the multiarch Makefile by putting the wide chars implementation to correct wcsmbs rule.
* powerpc: abort transaction in syscallsAdhemerval Zanella2015-01-121-0/+16
| | | | | | | | | | | Linux kernel powerpc documentation states issuing a syscall inside a transaction is not recommended and may lead to undefined behavior. It also states syscalls does not abort transactoin neither they run in transactional state. To avoid side-effects being visible outside transactions, GLIBC with lock elision enabled will issue a transaction abort instruction just before all syscalls if hardware supports hardware transactions.
* Fix libm feupdateenv namespace (bug 17748).Joseph Myers2015-01-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Concluding the fixes for C90 libm functions calling C99 fe* functions, this patch fixes the case of feupdateenv by making it a weak alias for __feupdateenv and making the affected code call __feupdateenv. Tested for x86_64 (testsuite, and that installed stripped shared libraries are unchanged by the patch). Also tested for ARM (soft-float) that the math.h linknamespace tests now pass. [BZ #17748] * include/fenv.h (__feupdateenv): Use libm_hidden_proto. * math/feupdateenv.c (__feupdateenv): Use libm_hidden_def. * sysdeps/aarch64/fpu/feupdateenv.c (feupdateenv): Rename to __feupdateenv and define as weak alias of __feupdateenv. Use libm_hidden_weak. * sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Use libm_hidden_def. * sysdeps/arm/feupdateenv.c (feupdateenv): Rename to __feupdateenv and define as weak alias of __feupdateenv. Use libm_hidden_weak. * sysdeps/hppa/fpu/feupdateenv.c (feupdateenv): Likewise. * sysdeps/i386/fpu/feupdateenv.c (__feupdateenv): Use libm_hidden_def. * sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Rename to __feupdateenv and define as weak alias of __feupdateenv. Use libm_hidden_weak. * sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Use libm_hidden_def. * sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Rename to __feupdateenv and define as weak alias of __feupdateenv. Use libm_hidden_weak. * sysdeps/powerpc/fpu/feupdateenv.c (__feupdateenv): Use libm_hidden_def. * sysdeps/powerpc/nofpu/feupdateenv.c (__feupdateenv): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/feupdateenv.c (__feupdateenv): Likewise. * sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Rename to __feupdateenv and define as weak alias of __feupdateenv. Use libm_hidden_weak. * sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise. * sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Use libm_hidden_def. * sysdeps/tile/math_private.h (__feupdateenv): New inline function. * sysdeps/x86_64/fpu/feupdateenv.c (__feupdateenv): Use libm_hidden_def. * sysdeps/generic/math_private.h (default_libc_feupdateenv): Call __feupdateenv instead of feupdateenv. (default_libc_feupdateenv_test): Likewise. (libc_feresetround_ctx): Likewise.
* Fix libm fesetround namespace (bug 17748).Joseph Myers2015-01-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the fixes for C90 libm functions calling C99 fe* functions, this patch fixes the case of fesetround by making it a weak alias of __fesetround and making the affected code call __fesetround. An existing __fesetround function in fenv_libc.h for powerpc is renamed to __fesetround_inline. Tested for x86_64 (testsuite, and that disassembly of installed shared libraries is unchanged by the patch). Also tested for ARM (soft-float) that fesetround failures disappear from the linknamespace test results (feupdateenv remains to be addressed to complete fixing bug 17748). [BZ #17748] * include/fenv.h (__fesetround): Declare. Use libm_hidden_proto. * math/fesetround.c (fesetround): Rename to __fesetround and define as weak alias of __fesetround. Use libm_hidden_weak. * sysdeps/aarch64/fpu/fesetround.c (fesetround): Likewise. * sysdeps/alpha/fpu/fesetround.c (fesetround): Likewise. * sysdeps/arm/fesetround.c (fesetround): Likewise. * sysdeps/hppa/fpu/fesetround.c (fesetround): Likewise. * sysdeps/i386/fpu/fesetround.c (fesetround): Likewise. * sysdeps/ia64/fpu/fesetround.c (fesetround): Likewise. * sysdeps/m68k/fpu/fesetround.c (fesetround): Likewise. * sysdeps/mips/fpu/fesetround.c (fesetround): Likewise. * sysdeps/powerpc/fpu/fenv_libc.h (__fesetround): Rename to __fesetround_inline. * sysdeps/powerpc/fpu/fenv_private.h (libc_fesetround_ppc): Call __fesetround_inline instead of __fesetround. * sysdeps/powerpc/fpu/fesetround.c (fesetround): Rename to __fesetround and define as weak alias of __fesetround. Use libm_hidden_weak. Call __fesetround_inline instead of __fesetround. * sysdeps/powerpc/nofpu/fesetround.c (fesetround): Rename to __fesetround and define as weak alias of __fesetround. Use libm_hidden_weak. * sysdeps/powerpc/powerpc32/e500/nofpu/fesetround.c (fesetround): Likewise. * sysdeps/s390/fpu/fesetround.c (fesetround): Likewise. * sysdeps/sh/sh4/fpu/fesetround.c (fesetround): Likewise. * sysdeps/sparc/fpu/fesetround.c (fesetround): Likewise. * sysdeps/tile/math_private.h (__fesetround): New inline function. * sysdeps/x86_64/fpu/fesetround.c (fesetround): Rename to __fesetround and define as weak alias of __fesetround. Use libm_hidden_weak. * sysdeps/generic/math_private.h (default_libc_fesetround): Call __fesetround instead of fesetround. (default_libc_feholdexcept_setround): Likewise. (libc_feholdsetround_ctx): Likewise. (libc_feholdsetround_noex_ctx): Likewise.
View Lorry Controller Status