diff options
Diffstat (limited to 'sysdeps/powerpc/powerpc64/power6/memcpy.S')
| -rw-r--r-- | sysdeps/powerpc/powerpc64/power6/memcpy.S | 1170 |
1 files changed, 1170 insertions, 0 deletions
diff --git a/sysdeps/powerpc/powerpc64/power6/memcpy.S b/sysdeps/powerpc/powerpc64/power6/memcpy.S new file mode 100644 index 0000000000..d105f8302e --- /dev/null +++ b/sysdeps/powerpc/powerpc64/power6/memcpy.S @@ -0,0 +1,1170 @@ +/* Optimized memcpy implementation for PowerPC64. + Copyright (C) 2003, 2006, 2007 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA + 02110-1301 USA. */ + +#include <sysdep.h> +#include <bp-sym.h> +#include <bp-asm.h> + +/* __ptr_t [r3] memcpy (__ptr_t dst [r3], __ptr_t src [r4], size_t len [r5]); + Returns 'dst'. + + Memcpy handles short copies (< 32-bytes) using a binary move blocks + (no loops) of lwz/stw. The tail (remaining 1-3) bytes is handled + with the appropriate combination of byte and halfword load/stores. + There is minimal effort to optimize the alignment of short moves. + The 64-bit implementations of POWER3 and POWER4 do a reasonable job + of handling unligned load/stores that do not cross 32-byte boundries. + + Longer moves (>= 32-bytes) justify the effort to get at least the + destination doubleword (8-byte) aligned. Further optimization is + posible when both source and destination are doubleword aligned. + Each case has a optimized unrolled loop. + + For POWER6 unaligned loads will take a 20+ cycle hicup for any + L1 cache miss that crosses a 32- or 128-byte boundary. Store + is more forgiving and does not take a hicup until page or + segment boundaries. So we require doubleword alignment for + the source but may take a risk and only require word alignment + for the destination. */ + + .machine "power6" +EALIGN (BP_SYM (memcpy), 7, 0) + CALL_MCOUNT 3 + + cmpldi cr1,5,31 + neg 0,3 + std 3,-16(1) + std 31,-8(1) + andi. 11,3,7 /* check alignement of dst. */ + clrldi 0,0,61 /* Number of bytes until the 1st doubleword of dst. */ + clrldi 10,4,61 /* check alignement of src. */ + cmpldi cr6,5,8 + ble- cr1,.L2 /* If move < 32 bytes use short move code. */ + mtcrf 0x01,0 + cmpld cr6,10,11 + srdi 9,5,3 /* Number of full double words remaining. */ + beq .L0 + + subf 5,0,5 + /* Move 0-7 bytes as needed to get the destination doubleword alligned. + Duplicate some code to maximize fall-throught and minimize agen delays. */ +1: bf 31,2f + lbz 6,0(4) + stb 6,0(3) + bf 30,5f + lhz 6,1(4) + sth 6,1(3) + bf 29,0f + lwz 6,3(4) + stw 6,3(3) + b 0f +5: + bf 29,0f + lwz 6,1(4) + stw 6,1(3) + b 0f + +2: bf 30,4f + lhz 6,0(4) + sth 6,0(3) + bf 29,0f + lwz 6,2(4) + stw 6,2(3) + b 0f + +4: bf 29,0f + lwz 6,0(4) + stw 6,0(3) +0: +/* Add the number of bytes until the 1st doubleword of dst to src and dst. */ + add 4,4,0 + add 3,3,0 + + clrldi 10,4,61 /* check alignement of src again. */ + srdi 9,5,3 /* Number of full double words remaining. */ + + /* Copy doublewords from source to destination, assumpting the + destination is aligned on a doubleword boundary. + + At this point we know there are at least 25 bytes left (32-7) to copy. + The next step is to determine if the source is also doubleword aligned. + If not branch to the unaligned move code at .L6. which uses + a load, shift, store strategy. + + Otherwise source and destination are doubleword aligned, and we can + the optimized doubleword copy loop. */ + .align 4 +.L0: + clrldi 11,5,61 + andi. 0,5,0x78 + srdi 12,5,7 /* Number of 128-byte blocks to move. */ + cmpldi cr1,11,0 /* If the tail is 0 bytes */ + bne- cr6,.L6 /* If source is not DW aligned. */ + + /* Move doublewords where destination and source are DW aligned. + Use a unrolled loop to copy 16 doublewords (128-bytes) per iteration. + If the the copy is not an exact multiple of 128 bytes, 1-15 + doublewords are copied as needed to set up the main loop. After + the main loop exits there may be a tail of 1-7 bytes. These byte + are copied a word/halfword/byte at a time as needed to preserve + alignment. + + For POWER6 the L1 is store-through and the L2 is store-in. The + L2 is clocked at half CPU clock so we can store 16 bytes every + other cycle. POWER6 also has a load/store bypass so we can do + load, load, store, store every 2 cycles. + + The following code is sensitive to cache line alignment. Do not + make any change with out first making sure thay don't result in + splitting ld/std pairs across a cache line. */ + + mtcrf 0x02,5 + mtcrf 0x01,5 + cmpldi cr5,12,1 + beq L(das_loop) + + bf 25,4f + .align 3 + ld 6,0(4) + ld 7,8(4) + mr 11,4 + mr 10,3 + std 6,0(3) + std 7,8(3) + ld 6,16(4) + ld 7,24(4) + std 6,16(3) + std 7,24(3) + ld 6,0+32(4) + ld 7,8+32(4) + addi 4,4,64 + addi 3,3,64 + std 6,0+32(10) + std 7,8+32(10) + ld 6,16+32(11) + ld 7,24+32(11) + std 6,16+32(10) + std 7,24+32(10) +4: + mr 10,3 + bf 26,2f + ld 6,0(4) + ld 7,8(4) + mr 11,4 + nop + std 6,0(3) + std 7,8(3) + ld 6,16(4) + ld 7,24(4) + addi 4,4,32 + std 6,16(3) + std 7,24(3) + addi 3,3,32 +6: + nop + bf 27,5f + ld 6,0+32(11) + ld 7,8+32(11) + addi 4,4,16 + addi 3,3,16 + std 6,0+32(10) + std 7,8+32(10) + bf 28,L(das_loop_s) + ld 0,16+32(11) + addi 4,4,8 + addi 3,3,8 + std 0,16+32(10) + blt cr5,L(das_tail) + b L(das_loop) + .align 3 +5: + nop + bf 28,L(das_loop_s) + ld 6,32(11) + addi 4,4,8 + addi 3,3,8 + std 6,32(10) + blt cr5,L(das_tail) + b L(das_loop) + .align 3 +2: + mr 11,4 + bf 27,1f + ld 6,0(4) + ld 7,8(4) + addi 4,4,16 + addi 3,3,16 + std 6,0(10) + std 7,8(10) + bf 28,L(das_loop_s) + ld 0,16(11) + addi 4,11,24 + addi 3,10,24 + std 0,16(10) + blt cr5,L(das_tail) + b L(das_loop) + .align 3 +1: + nop + bf 28,L(das_loop_s) + ld 6,0(4) + addi 4,4,8 + addi 3,3,8 + std 6,0(10) +L(das_loop_s): + nop + blt cr5,L(das_tail) + .align 4 +L(das_loop): + ld 6,0(4) + ld 7,8(4) + mr 10,3 + mr 11,4 + std 6,0(3) + std 7,8(3) + addi 12,12,-1 + nop + ld 8,16(4) + ld 0,24(4) + std 8,16(3) + std 0,24(3) + + ld 6,0+32(4) + ld 7,8+32(4) + std 6,0+32(3) + std 7,8+32(3) + ld 8,16+32(4) + ld 0,24+32(4) + std 8,16+32(3) + std 0,24+32(3) + + ld 6,0+64(11) + ld 7,8+64(11) + std 6,0+64(10) + std 7,8+64(10) + ld 8,16+64(11) + ld 0,24+64(11) + std 8,16+64(10) + std 0,24+64(10) + + ld 6,0+96(11) + ld 7,8+96(11) + addi 4,4,128 + addi 3,3,128 + std 6,0+96(10) + std 7,8+96(10) + ld 8,16+96(11) + ld 0,24+96(11) + std 8,16+96(10) + std 0,24+96(10) + ble cr5,L(das_loop_e) + + mtctr 12 + .align 4 +L(das_loop2): + ld 6,0(4) + ld 7,8(4) + mr 10,3 + mr 11,4 + std 6,0(3) + std 7,8(3) + ld 8,16(4) + ld 0,24(4) + std 8,16(3) + std 0,24(3) + + ld 6,0+32(4) + ld 7,8+32(4) + std 6,0+32(3) + std 7,8+32(3) + ld 8,16+32(4) + ld 0,24+32(4) + std 8,16+32(3) + std 0,24+32(3) + + ld 6,0+64(11) + ld 7,8+64(11) + std 6,0+64(10) + std 7,8+64(10) + ld 8,16+64(11) + ld 0,24+64(11) + std 8,16+64(10) + std 0,24+64(10) + + ld 6,0+96(11) + ld 7,8+96(11) + addi 4,4,128 + addi 3,3,128 + std 6,0+96(10) + std 7,8+96(10) + ld 8,16+96(11) + ld 0,24+96(11) + std 8,16+96(10) + std 0,24+96(10) + bdnz L(das_loop2) +L(das_loop_e): +/* Check of a 1-7 byte tail, return if none. */ + bne cr1,L(das_tail2) +/* Return original dst pointer. */ + ld 3,-16(1) + blr + .align 4 +L(das_tail): + beq cr1,0f + +L(das_tail2): +/* At this point we have a tail of 0-7 bytes and we know that the + destiniation is double word aligned. */ +4: bf 29,2f + lwz 6,0(4) + stw 6,0(3) + bf 30,5f + lhz 6,4(4) + sth 6,4(3) + bf 31,0f + lbz 6,6(4) + stb 6,6(3) + b 0f +5: bf 31,0f + lbz 6,4(4) + stb 6,4(3) + b 0f + +2: bf 30,1f + lhz 6,0(4) + sth 6,0(3) + bf 31,0f + lbz 6,2(4) + stb 6,2(3) + b 0f + +1: bf 31,0f + lbz 6,0(4) + stb 6,0(3) +0: + /* Return original dst pointer. */ + ld 3,-16(1) + blr + +/* Copy up to 31 bytes. This divided into two cases 0-8 bytes and 9-31 + bytes. Each case is handled without loops, using binary (1,2,4,8) + tests. + + In the short (0-8 byte) case no attempt is made to force alignment + of either source or destination. The hardware will handle the + unaligned load/stores with small delays for crossing 32- 128-byte, + and 4096-byte boundaries. Since these short moves are unlikely to be + unaligned or cross these boundaries, the overhead to force + alignment is not justified. + + The longer (9-31 byte) move is more likely to cross 32- or 128-byte + boundaries. Since only loads are sensitive to the 32-/128-byte + boundaries it is more important to align the source then the + destination. If the source is not already word aligned, we first + move 1-3 bytes as needed. Since we are only word aligned we don't + use double word load/stores to insure that all loads are aligned. + While the destination and stores may still be unaligned, this + is only an issue for page (4096 byte boundary) crossing, which + should be rare for these short moves. The hardware handles this + case automatically with a small (~20 cycle) delay. */ + .align 4 +.L2: + mtcrf 0x01,5 + neg 8,4 + clrrdi 11,4,2 + andi. 0,8,3 + ble cr6,.LE8 /* Handle moves of 0-8 bytes. */ +/* At least 9 bytes left. Get the source word aligned. */ + cmpldi cr1,5,16 + mr 10,5 + mr 12,4 + cmpldi cr6,0,2 + beq L(dus_tail) /* If the source is already word aligned skip this. */ +/* Copy 1-3 bytes to get source address word aligned. */ + lwz 6,0(11) + subf 10,0,5 + add 12,4,0 + blt cr6,5f + srdi 7,6,16 + bgt cr6,3f + sth 6,0(3) + b 7f + .align 4 +3: + stb 7,0(3) + sth 6,1(3) + b 7f + .align 4 +5: + stb 6,0(3) +7: + cmpldi cr1,10,16 + add 3,3,0 + mtcrf 0x01,10 + .align 4 +L(dus_tail): +/* At least 6 bytes left and the source is word aligned. This allows + some speculative loads up front. */ +/* We need to special case the fall-through because the biggest delays + are due to address computation not being ready in time for the + AGEN. */ + lwz 6,0(12) + lwz 7,4(12) + blt cr1,L(dus_tail8) + cmpldi cr0,10,24 +L(dus_tail16): /* Move 16 bytes. */ + stw 6,0(3) + stw 7,4(3) + lwz 6,8(12) + lwz 7,12(12) + stw 6,8(3) + stw 7,12(3) +/* Move 8 bytes more. */ + bf 28,L(dus_tail16p8) + cmpldi cr1,10,28 + lwz 6,16(12) + lwz 7,20(12) + stw 6,16(3) + stw 7,20(3) +/* Move 4 bytes more. */ + bf 29,L(dus_tail16p4) + lwz 6,24(12) + stw 6,24(3) + addi 12,12,28 + addi 3,3,28 + bgt cr1,L(dus_tail2) + /* exactly 28 bytes. Return original dst pointer and exit. */ + ld 3,-16(1) + blr + .align 4 +L(dus_tail16p8): /* less then 8 bytes left. */ + beq cr1,L(dus_tailX) /* exactly 16 bytes, early exit. */ + cmpldi cr1,10,20 + bf 29,L(dus_tail16p2) +/* Move 4 bytes more. */ + lwz 6,16(12) + stw 6,16(3) + addi 12,12,20 + addi 3,3,20 + bgt cr1,L(dus_tail2) + /* exactly 20 bytes. Return original dst pointer and exit. */ + ld 3,-16(1) + blr + .align 4 +L(dus_tail16p4): /* less then 4 bytes left. */ + addi 12,12,24 + addi 3,3,24 + bgt cr0,L(dus_tail2) + /* exactly 24 bytes. Return original dst pointer and exit. */ + ld 3,-16(1) + blr + .align 4 +L(dus_tail16p2): /* 16 bytes moved, less then 4 bytes left. */ + addi 12,12,16 + addi 3,3,16 + b L(dus_tail2) + + .align 4 +L(dus_tail8): /* Move 8 bytes. */ +/* r6, r7 already loaded speculatively. */ + cmpldi cr1,10,8 + cmpldi cr0,10,12 + bf 28,L(dus_tail4) + .align 2 + stw 6,0(3) + stw 7,4(3) +/* Move 4 bytes more. */ + bf 29,L(dus_tail8p4) + lwz 6,8(12) + stw 6,8(3) + addi 12,12,12 + addi 3,3,12 + bgt cr0,L(dus_tail2) + /* exactly 12 bytes. Return original dst pointer and exit. */ + ld 3,-16(1) + blr + .align 4 +L(dus_tail8p4): /* less then 4 bytes left. */ + addi 12,12,8 + addi 3,3,8 + bgt cr1,L(dus_tail2) + /* exactly 8 bytes. Return original dst pointer and exit. */ + ld 3,-16(1) + blr + + .align 4 +L(dus_tail4): /* Move 4 bytes. */ +/* r6 already loaded speculatively. If we are here we know there is + more then 4 bytes left. So there is no need to test. */ + addi 12,12,4 + stw 6,0(3) + addi 3,3,4 +L(dus_tail2): /* Move 2-3 bytes. */ + bf 30,L(dus_tail1) + lhz 6,0(12) + sth 6,0(3) + bf 31,L(dus_tailX) + lbz 7,2(12) + stb 7,2(3) + ld 3,-16(1) + blr +L(dus_tail1): /* Move 1 byte. */ + bf 31,L(dus_tailX) + lbz 6,0(12) + stb 6,0(3) +L(dus_tailX): + /* Return original dst pointer. */ + ld 3,-16(1) + blr + +/* Special case to copy 0-8 bytes. */ + .align 4 +.LE8: + mr 12,4 + bne cr6,L(dus_4) +/* Exactly 8 bytes. We may cross a 32-/128-byte boundry and take a ~20 + cycle delay. This case should be rare and any attempt to avoid this + would take most of 20 cycles any way. */ + ld 6,0(4) + std 6,0(3) + /* Return original dst pointer. */ + ld 3,-16(1) + blr + .align 4 +L(dus_4): + bf 29,L(dus_tail2) + lwz 6,0(4) + stw 6,0(3) + bf 30,L(dus_5) + lhz 7,4(4) + sth 7,4(3) + bf 31,L(dus_0) + lbz 8,6(4) + stb 8,6(3) + ld 3,-16(1) + blr + .align 4 +L(dus_5): + bf 31,L(dus_0) + lbz 6,4(4) + stb 6,4(3) +L(dus_0): + /* Return original dst pointer. */ + ld 3,-16(1) + blr + + .align 4 +.L6: + cfi_offset(31,-8) + mr 12,4 + mr 31,5 + /* Copy doublewords where the destination is aligned but the source is + not. Use aligned doubleword loads from the source, shifted to realign + the data, to allow aligned destination stores. */ + addi 11,9,-1 /* loop DW count is one less than total */ + subf 5,10,12 /* Move source addr to previous full double word. */ + cmpldi cr5, 10, 2 + cmpldi cr0, 10, 4 + mr 4,3 + srdi 8,11,2 /* calculate the 32 byte loop count */ + ld 6,0(5) /* pre load 1st full doubleword. */ + mtcrf 0x01,11 + cmpldi cr6,9,4 + mtctr 8 + ld 7,8(5) /* pre load 2nd full doubleword. */ + bge cr0, L(du4_do) + blt cr5, L(du1_do) + beq cr5, L(du2_do) + b L(du3_do) + + .align 4 +L(du1_do): + bf 30,L(du1_1dw) + + /* there are at least two DWs to copy */ + sldi 0,6, 8 + srdi 8,7, 64-8 + or 0,0,8 + ld 6,16(5) + std 0,0(4) + sldi 0,7, 8 + srdi 8,6, 64-8 + or 0,0,8 + ld 7,24(5) + std 0,8(4) + addi 4,4,16 + addi 5,5,32 + blt cr6,L(du1_fini) /* if total DWs = 3, then bypass loop */ + bf 31,L(du1_loop) + /* there is a third DW to copy */ + sldi 0,6, 8 + srdi 8,7, 64-8 + or 0,0,8 + std 0,0(4) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + addi 4,4,8 + beq cr6,L(du1_fini) /* if total DWs = 4, then bypass loop */ + b L(du1_loop) + .align 4 +L(du1_1dw): + sldi 0,6, 8 + srdi 8,7, 64-8 + addi 5,5,16 + or 0,0,8 + bf 31,L(du1_loop) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + std 0,0(4) + addi 4,4,8 + .align 4 +/* copy 32 bytes at a time */ +L(du1_loop): + sldi 0,6, 8 + srdi 8,7, 64-8 + or 0,0,8 + ld 6,0(5) + std 0,0(4) + sldi 0,7, 8 + srdi 8,6, 64-8 + or 0,0,8 + ld 7,8(5) + std 0,8(4) + sldi 0,6, 8 + srdi 8,7, 64-8 + or 0,0,8 + ld 6,16(5) + std 0,16(4) + sldi 0,7, 8 + srdi 8,6, 64-8 + or 0,0,8 + ld 7,24(5) + std 0,24(4) + addi 5,5,32 + addi 4,4,32 + bdnz+ L(du1_loop) + .align 4 +L(du1_fini): + /* calculate and store the final DW */ + sldi 0,6, 8 + srdi 8,7, 64-8 + or 0,0,8 + std 0,0(4) + b L(du_done) + + .align 4 +L(du2_do): + bf 30,L(du2_1dw) + + /* there are at least two DWs to copy */ + sldi 0,6, 16 + srdi 8,7, 64-16 + or 0,0,8 + ld 6,16(5) + std 0,0(4) + sldi 0,7, 16 + srdi 8,6, 64-16 + or 0,0,8 + ld 7,24(5) + std 0,8(4) + addi 4,4,16 + addi 5,5,32 + blt cr6,L(du2_fini) /* if total DWs = 3, then bypass loop */ + bf 31,L(du2_loop) + /* there is a third DW to copy */ + sldi 0,6, 16 + srdi 8,7, 64-16 + or 0,0,8 + std 0,0(4) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + addi 4,4,8 + beq cr6,L(du2_fini) /* if total DWs = 4, then bypass loop */ + b L(du2_loop) + .align 4 +L(du2_1dw): + sldi 0,6, 16 + srdi 8,7, 64-16 + addi 5,5,16 + or 0,0,8 + bf 31,L(du2_loop) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + std 0,0(4) + addi 4,4,8 + .align 4 +/* copy 32 bytes at a time */ +L(du2_loop): + sldi 0,6, 16 + srdi 8,7, 64-16 + or 0,0,8 + ld 6,0(5) + std 0,0(4) + sldi 0,7, 16 + srdi 8,6, 64-16 + or 0,0,8 + ld 7,8(5) + std 0,8(4) + sldi 0,6, 16 + srdi 8,7, 64-16 + or 0,0,8 + ld 6,16(5) + std 0,16(4) + sldi 0,7, 16 + srdi 8,6, 64-16 + or 0,0,8 + ld 7,24(5) + std 0,24(4) + addi 5,5,32 + addi 4,4,32 + bdnz+ L(du2_loop) + .align 4 +L(du2_fini): + /* calculate and store the final DW */ + sldi 0,6, 16 + srdi 8,7, 64-16 + or 0,0,8 + std 0,0(4) + b L(du_done) + + .align 4 +L(du3_do): + bf 30,L(du3_1dw) + + /* there are at least two DWs to copy */ + sldi 0,6, 24 + srdi 8,7, 64-24 + or 0,0,8 + ld 6,16(5) + std 0,0(4) + sldi 0,7, 24 + srdi 8,6, 64-24 + or 0,0,8 + ld 7,24(5) + std 0,8(4) + addi 4,4,16 + addi 5,5,32 + blt cr6,L(du3_fini) /* if total DWs = 3, then bypass loop */ + bf 31,L(du3_loop) + /* there is a third DW to copy */ + sldi 0,6, 24 + srdi 8,7, 64-24 + or 0,0,8 + std 0,0(4) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + addi 4,4,8 + beq cr6,L(du3_fini) /* if total DWs = 4, then bypass loop */ + b L(du3_loop) + .align 4 +L(du3_1dw): + sldi 0,6, 24 + srdi 8,7, 64-24 + addi 5,5,16 + or 0,0,8 + bf 31,L(du3_loop) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + std 0,0(4) + addi 4,4,8 + .align 4 +/* copy 32 bytes at a time */ +L(du3_loop): + sldi 0,6, 24 + srdi 8,7, 64-24 + or 0,0,8 + ld 6,0(5) + std 0,0(4) + sldi 0,7, 24 + srdi 8,6, 64-24 + or 0,0,8 + ld 7,8(5) + std 0,8(4) + sldi 0,6, 24 + srdi 8,7, 64-24 + or 0,0,8 + ld 6,16(5) + std 0,16(4) + sldi 0,7, 24 + srdi 8,6, 64-24 + or 0,0,8 + ld 7,24(5) + std 0,24(4) + addi 5,5,32 + addi 4,4,32 + bdnz+ L(du3_loop) + .align 4 +L(du3_fini): + /* calculate and store the final DW */ + sldi 0,6, 24 + srdi 8,7, 64-24 + or 0,0,8 + std 0,0(4) + b L(du_done) + + .align 4 +L(du4_do): + cmpldi cr5, 10, 6 + beq cr0, L(du4_dox) + blt cr5, L(du5_do) + beq cr5, L(du6_do) + b L(du7_do) +L(du4_dox): + bf 30,L(du4_1dw) + + /* there are at least two DWs to copy */ + sldi 0,6, 32 + srdi 8,7, 64-32 + or 0,0,8 + ld 6,16(5) + std 0,0(4) + sldi 0,7, 32 + srdi 8,6, 64-32 + or 0,0,8 + ld 7,24(5) + std 0,8(4) + addi 4,4,16 + addi 5,5,32 + blt cr6,L(du4_fini) /* if total DWs = 3, then bypass loop */ + bf 31,L(du4_loop) + /* there is a third DW to copy */ + sldi 0,6, 32 + srdi 8,7, 64-32 + or 0,0,8 + std 0,0(4) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + addi 4,4,8 + beq cr6,L(du4_fini) /* if total DWs = 4, then bypass loop */ + b L(du4_loop) + .align 4 +L(du4_1dw): + sldi 0,6, 32 + srdi 8,7, 64-32 + addi 5,5,16 + or 0,0,8 + bf 31,L(du4_loop) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + std 0,0(4) + addi 4,4,8 + .align 4 +/* copy 32 bytes at a time */ +L(du4_loop): + sldi 0,6, 32 + srdi 8,7, 64-32 + or 0,0,8 + ld 6,0(5) + std 0,0(4) + sldi 0,7, 32 + srdi 8,6, 64-32 + or 0,0,8 + ld 7,8(5) + std 0,8(4) + sldi 0,6, 32 + srdi 8,7, 64-32 + or 0,0,8 + ld 6,16(5) + std 0,16(4) + sldi 0,7, 32 + srdi 8,6, 64-32 + or 0,0,8 + ld 7,24(5) + std 0,24(4) + addi 5,5,32 + addi 4,4,32 + bdnz+ L(du4_loop) + .align 4 +L(du4_fini): + /* calculate and store the final DW */ + sldi 0,6, 32 + srdi 8,7, 64-32 + or 0,0,8 + std 0,0(4) + b L(du_done) + + .align 4 +L(du5_do): + bf 30,L(du5_1dw) + + /* there are at least two DWs to copy */ + sldi 0,6, 40 + srdi 8,7, 64-40 + or 0,0,8 + ld 6,16(5) + std 0,0(4) + sldi 0,7, 40 + srdi 8,6, 64-40 + or 0,0,8 + ld 7,24(5) + std 0,8(4) + addi 4,4,16 + addi 5,5,32 + blt cr6,L(du5_fini) /* if total DWs = 3, then bypass loop */ + bf 31,L(du5_loop) + /* there is a third DW to copy */ + sldi 0,6, 40 + srdi 8,7, 64-40 + or 0,0,8 + std 0,0(4) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + addi 4,4,8 + beq cr6,L(du5_fini) /* if total DWs = 4, then bypass loop */ + b L(du5_loop) + .align 4 +L(du5_1dw): + sldi 0,6, 40 + srdi 8,7, 64-40 + addi 5,5,16 + or 0,0,8 + bf 31,L(du5_loop) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + std 0,0(4) + addi 4,4,8 + .align 4 +/* copy 32 bytes at a time */ +L(du5_loop): + sldi 0,6, 40 + srdi 8,7, 64-40 + or 0,0,8 + ld 6,0(5) + std 0,0(4) + sldi 0,7, 40 + srdi 8,6, 64-40 + or 0,0,8 + ld 7,8(5) + std 0,8(4) + sldi 0,6, 40 + srdi 8,7, 64-40 + or 0,0,8 + ld 6,16(5) + std 0,16(4) + sldi 0,7, 40 + srdi 8,6, 64-40 + or 0,0,8 + ld 7,24(5) + std 0,24(4) + addi 5,5,32 + addi 4,4,32 + bdnz+ L(du5_loop) + .align 4 +L(du5_fini): + /* calculate and store the final DW */ + sldi 0,6, 40 + srdi 8,7, 64-40 + or 0,0,8 + std 0,0(4) + b L(du_done) + + .align 4 +L(du6_do): + bf 30,L(du6_1dw) + + /* there are at least two DWs to copy */ + sldi 0,6, 48 + srdi 8,7, 64-48 + or 0,0,8 + ld 6,16(5) + std 0,0(4) + sldi 0,7, 48 + srdi 8,6, 64-48 + or 0,0,8 + ld 7,24(5) + std 0,8(4) + addi 4,4,16 + addi 5,5,32 + blt cr6,L(du6_fini) /* if total DWs = 3, then bypass loop */ + bf 31,L(du6_loop) + /* there is a third DW to copy */ + sldi 0,6, 48 + srdi 8,7, 64-48 + or 0,0,8 + std 0,0(4) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + addi 4,4,8 + beq cr6,L(du6_fini) /* if total DWs = 4, then bypass loop */ + b L(du6_loop) + .align 4 +L(du6_1dw): + sldi 0,6, 48 + srdi 8,7, 64-48 + addi 5,5,16 + or 0,0,8 + bf 31,L(du6_loop) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + std 0,0(4) + addi 4,4,8 + .align 4 +/* copy 32 bytes at a time */ +L(du6_loop): + sldi 0,6, 48 + srdi 8,7, 64-48 + or 0,0,8 + ld 6,0(5) + std 0,0(4) + sldi 0,7, 48 + srdi 8,6, 64-48 + or 0,0,8 + ld 7,8(5) + std 0,8(4) + sldi 0,6, 48 + srdi 8,7, 64-48 + or 0,0,8 + ld 6,16(5) + std 0,16(4) + sldi 0,7, 48 + srdi 8,6, 64-48 + or 0,0,8 + ld 7,24(5) + std 0,24(4) + addi 5,5,32 + addi 4,4,32 + bdnz+ L(du6_loop) + .align 4 +L(du6_fini): + /* calculate and store the final DW */ + sldi 0,6, 48 + srdi 8,7, 64-48 + or 0,0,8 + std 0,0(4) + b L(du_done) + + .align 4 +L(du7_do): + bf 30,L(du7_1dw) + + /* there are at least two DWs to copy */ + sldi 0,6, 56 + srdi 8,7, 64-56 + or 0,0,8 + ld 6,16(5) + std 0,0(4) + sldi 0,7, 56 + srdi 8,6, 64-56 + or 0,0,8 + ld 7,24(5) + std 0,8(4) + addi 4,4,16 + addi 5,5,32 + blt cr6,L(du7_fini) /* if total DWs = 3, then bypass loop */ + bf 31,L(du7_loop) + /* there is a third DW to copy */ + sldi 0,6, 56 + srdi 8,7, 64-56 + or 0,0,8 + std 0,0(4) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + addi 4,4,8 + beq cr6,L(du7_fini) /* if total DWs = 4, then bypass loop */ + b L(du7_loop) + .align 4 +L(du7_1dw): + sldi 0,6, 56 + srdi 8,7, 64-56 + addi 5,5,16 + or 0,0,8 + bf 31,L(du7_loop) + mr 6,7 + ld 7,0(5) + addi 5,5,8 + std 0,0(4) + addi 4,4,8 + .align 4 +/* copy 32 bytes at a time */ +L(du7_loop): + sldi 0,6, 56 + srdi 8,7, 64-56 + or 0,0,8 + ld 6,0(5) + std 0,0(4) + sldi 0,7, 56 + srdi 8,6, 64-56 + or 0,0,8 + ld 7,8(5) + std 0,8(4) + sldi 0,6, 56 + srdi 8,7, 64-56 + or 0,0,8 + ld 6,16(5) + std 0,16(4) + sldi 0,7, 56 + srdi 8,6, 64-56 + or 0,0,8 + ld 7,24(5) + std 0,24(4) + addi 5,5,32 + addi 4,4,32 + bdnz+ L(du7_loop) + .align 4 +L(du7_fini): + /* calculate and store the final DW */ + sldi 0,6, 56 + srdi 8,7, 64-56 + or 0,0,8 + std 0,0(4) + b L(du_done) + + .align 4 +L(du_done): + rldicr 0,31,0,60 + mtcrf 0x01,31 + beq cr1,0f /* If the tail is 0 bytes we are done! */ + + add 3,3,0 + add 12,12,0 +/* At this point we have a tail of 0-7 bytes and we know that the + destiniation is double word aligned. */ +4: bf 29,2f + lwz 6,0(12) + addi 12,12,4 + stw 6,0(3) + addi 3,3,4 +2: bf 30,1f + lhz 6,0(12) + addi 12,12,2 + sth 6,0(3) + addi 3,3,2 +1: bf 31,0f + lbz 6,0(12) + stb 6,0(3) +0: + /* Return original dst pointer. */ + ld 31,-8(1) + ld 3,-16(1) + blr +END_GEN_TB (BP_SYM (memcpy),TB_TOCLESS) +libc_hidden_builtin_def (memcpy) |