Remove pre-GCC-4.9 MIPS code.

This patch removes some MIPS code in glibc that was conditional on old
GCC versions no longer supported for building glibc.

Tested with build-many-glibcs.py.

	* sysdeps/mips/atomic-machine.h (R10K_BEQZ_INSN): Remove.
	[__GNUC_PREREQ (4, 8) || __mips16]: Make code unconditional.
	[!__GNUC_PREREQ (4, 8) && !__mips16]: Remove conditional code.
	* sysdeps/mips/math-tests.h
	[_MIPS_SIM != _ABIO32 && !__GNUC_PREREQ (4, 9)]: Remove
	conditional code.

3 files changed, 52 insertions, 327 deletions

diff --git a/ChangeLog b/ChangeLog
index d4aac40eab..2dce96bc1e 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,12 @@
+2017-06-19  Joseph Myers  <joseph@codesourcery.com>
+
+	* sysdeps/mips/atomic-machine.h (R10K_BEQZ_INSN): Remove.
+	[__GNUC_PREREQ (4, 8) || __mips16]: Make code unconditional.
+	[!__GNUC_PREREQ (4, 8) && !__mips16]: Remove conditional code.
+	* sysdeps/mips/math-tests.h
+	[_MIPS_SIM != _ABIO32 && !__GNUC_PREREQ (4, 9)]: Remove
+	conditional code.
+
 2017-06-19  Florian Weimer  <fweimer@redhat.com>
 
 	* intl/dcigettext.c (DCIGETTEXT): Do not make copy of localename.
diff --git a/sysdeps/mips/atomic-machine.h b/sysdeps/mips/atomic-machine.h
index 16fef6b797..3bb39f0839 100644
--- a/sysdeps/mips/atomic-machine.h
+++ b/sysdeps/mips/atomic-machine.h
@@ -55,76 +55,43 @@ typedef uintmax_t uatomic_max_t;
 # define MIPS_SYNC	sync
 #endif
 
-/* Certain revisions of the R10000 Processor need an LL/SC Workaround
-   enabled.  Revisions before 3.0 misbehave on atomic operations, and
-   Revs 2.6 and lower deadlock after several seconds due to other errata.
-
-   To quote the R10K Errata:
-      Workaround: The basic idea is to inhibit the four instructions
-      from simultaneously becoming active in R10000. Padding all
-      ll/sc sequences with nops or changing the looping branch in the
-      routines to a branch likely (which is always predicted taken
-      by R10000) will work. The nops should go after the loop, and the
-      number of them should be 28. This number could be decremented for
-      each additional instruction in the ll/sc loop such as the lock
-      modifier(s) between the ll and sc, the looping branch and its
-      delay slot. For typical short routines with one ll/sc loop, any
-      instructions after the loop could also count as a decrement. The
-      nop workaround pollutes the cache more but would be a few cycles
-      faster if all the code is in the cache and the looping branch
-      is predicted not taken.  */
-
-
-#ifdef _MIPS_ARCH_R10000
-#define R10K_BEQZ_INSN "beqzl"
-#else
-#define R10K_BEQZ_INSN "beqz"
-#endif
-
 #define MIPS_SYNC_STR_2(X) #X
 #define MIPS_SYNC_STR_1(X) MIPS_SYNC_STR_2(X)
 #define MIPS_SYNC_STR MIPS_SYNC_STR_1(MIPS_SYNC)
 
-#if __GNUC_PREREQ (4, 8) || defined __mips16
-/* The __atomic_* builtins are available in GCC 4.7 and later, but MIPS
-   support for their efficient implementation was added only in GCC 4.8.
-   We still want to use them even with GCC 4.7 for MIPS16 code where we
-   have no assembly alternative available and want to avoid the __sync_*
-   builtins if at all possible.  */
-
-# define USE_ATOMIC_COMPILER_BUILTINS 1
+#define USE_ATOMIC_COMPILER_BUILTINS 1
 
 /* MIPS is an LL/SC machine.  However, XLP has a direct atomic exchange
    instruction which will be used by __atomic_exchange_n.  */
-# ifdef _MIPS_ARCH_XLP
-#  define ATOMIC_EXCHANGE_USES_CAS 0
-# else
-#  define ATOMIC_EXCHANGE_USES_CAS 1
-# endif
+#ifdef _MIPS_ARCH_XLP
+# define ATOMIC_EXCHANGE_USES_CAS 0
+#else
+# define ATOMIC_EXCHANGE_USES_CAS 1
+#endif
 
 /* Compare and exchange.
    For all "bool" routines, we return FALSE if exchange succesful.  */
 
-# define __arch_compare_and_exchange_bool_8_int(mem, newval, oldval, model) \
+#define __arch_compare_and_exchange_bool_8_int(mem, newval, oldval, model) \
   (abort (), 0)
 
-# define __arch_compare_and_exchange_bool_16_int(mem, newval, oldval, model) \
+#define __arch_compare_and_exchange_bool_16_int(mem, newval, oldval, model) \
   (abort (), 0)
 
-# define __arch_compare_and_exchange_bool_32_int(mem, newval, oldval, model) \
+#define __arch_compare_and_exchange_bool_32_int(mem, newval, oldval, model) \
   ({									\
     typeof (*mem) __oldval = (oldval);					\
     !__atomic_compare_exchange_n (mem, (void *) &__oldval, newval, 0,	\
 				  model, __ATOMIC_RELAXED);		\
   })
 
-# define __arch_compare_and_exchange_val_8_int(mem, newval, oldval, model) \
+#define __arch_compare_and_exchange_val_8_int(mem, newval, oldval, model) \
   (abort (), (typeof(*mem)) 0)
 
-# define __arch_compare_and_exchange_val_16_int(mem, newval, oldval, model) \
+#define __arch_compare_and_exchange_val_16_int(mem, newval, oldval, model) \
   (abort (), (typeof(*mem)) 0)
 
-# define __arch_compare_and_exchange_val_32_int(mem, newval, oldval, model) \
+#define __arch_compare_and_exchange_val_32_int(mem, newval, oldval, model) \
   ({									\
     typeof (*mem) __oldval = (oldval);					\
     __atomic_compare_exchange_n (mem, (void *) &__oldval, newval, 0,	\
@@ -132,336 +99,91 @@ typedef uintmax_t uatomic_max_t;
     __oldval;								\
   })
 
-# if _MIPS_SIM == _ABIO32
+#if _MIPS_SIM == _ABIO32
   /* We can't do an atomic 64-bit operation in O32.  */
-#  define __arch_compare_and_exchange_bool_64_int(mem, newval, oldval, model) \
+# define __arch_compare_and_exchange_bool_64_int(mem, newval, oldval, model) \
   (abort (), 0)
-#  define __arch_compare_and_exchange_val_64_int(mem, newval, oldval, model) \
+# define __arch_compare_and_exchange_val_64_int(mem, newval, oldval, model) \
   (abort (), (typeof(*mem)) 0)
-# else
-#  define __arch_compare_and_exchange_bool_64_int(mem, newval, oldval, model) \
+#else
+# define __arch_compare_and_exchange_bool_64_int(mem, newval, oldval, model) \
   __arch_compare_and_exchange_bool_32_int (mem, newval, oldval, model)
-#  define __arch_compare_and_exchange_val_64_int(mem, newval, oldval, model) \
+# define __arch_compare_and_exchange_val_64_int(mem, newval, oldval, model) \
   __arch_compare_and_exchange_val_32_int (mem, newval, oldval, model)
-# endif
+#endif
 
 /* Compare and exchange with "acquire" semantics, ie barrier after.  */
 
-# define atomic_compare_and_exchange_bool_acq(mem, new, old)	\
+#define atomic_compare_and_exchange_bool_acq(mem, new, old)	\
   __atomic_bool_bysize (__arch_compare_and_exchange_bool, int,	\
 			mem, new, old, __ATOMIC_ACQUIRE)
 
-# define atomic_compare_and_exchange_val_acq(mem, new, old)	\
+#define atomic_compare_and_exchange_val_acq(mem, new, old)	\
   __atomic_val_bysize (__arch_compare_and_exchange_val, int,	\
 		       mem, new, old, __ATOMIC_ACQUIRE)
 
 /* Compare and exchange with "release" semantics, ie barrier before.  */
 
-# define atomic_compare_and_exchange_val_rel(mem, new, old)	 \
+#define atomic_compare_and_exchange_val_rel(mem, new, old)	 \
   __atomic_val_bysize (__arch_compare_and_exchange_val, int,    \
                        mem, new, old, __ATOMIC_RELEASE)
 
 
 /* Atomic exchange (without compare).  */
 
-# define __arch_exchange_8_int(mem, newval, model)	\
+#define __arch_exchange_8_int(mem, newval, model)	\
   (abort (), (typeof(*mem)) 0)
 
-# define __arch_exchange_16_int(mem, newval, model)	\
+#define __arch_exchange_16_int(mem, newval, model)	\
   (abort (), (typeof(*mem)) 0)
 
-# define __arch_exchange_32_int(mem, newval, model)	\
+#define __arch_exchange_32_int(mem, newval, model)	\
   __atomic_exchange_n (mem, newval, model)
 
-# if _MIPS_SIM == _ABIO32
+#if _MIPS_SIM == _ABIO32
 /* We can't do an atomic 64-bit operation in O32.  */
-#  define __arch_exchange_64_int(mem, newval, model)	\
+# define __arch_exchange_64_int(mem, newval, model)	\
   (abort (), (typeof(*mem)) 0)
-# else
-#  define __arch_exchange_64_int(mem, newval, model)	\
+#else
+# define __arch_exchange_64_int(mem, newval, model)	\
   __atomic_exchange_n (mem, newval, model)
-# endif
+#endif
 
-# define atomic_exchange_acq(mem, value)				\
+#define atomic_exchange_acq(mem, value)				\
   __atomic_val_bysize (__arch_exchange, int, mem, value, __ATOMIC_ACQUIRE)
 
-# define atomic_exchange_rel(mem, value)				\
+#define atomic_exchange_rel(mem, value)				\
   __atomic_val_bysize (__arch_exchange, int, mem, value, __ATOMIC_RELEASE)
 
 
 /* Atomically add value and return the previous (unincremented) value.  */
 
-# define __arch_exchange_and_add_8_int(mem, value, model)	\
+#define __arch_exchange_and_add_8_int(mem, value, model)	\
   (abort (), (typeof(*mem)) 0)
 
-# define __arch_exchange_and_add_16_int(mem, value, model)	\
+#define __arch_exchange_and_add_16_int(mem, value, model)	\
   (abort (), (typeof(*mem)) 0)
 
-# define __arch_exchange_and_add_32_int(mem, value, model)	\
+#define __arch_exchange_and_add_32_int(mem, value, model)	\
   __atomic_fetch_add (mem, value, model)
 
-# if _MIPS_SIM == _ABIO32
+#if _MIPS_SIM == _ABIO32
 /* We can't do an atomic 64-bit operation in O32.  */
-#  define __arch_exchange_and_add_64_int(mem, value, model)	\
+# define __arch_exchange_and_add_64_int(mem, value, model)	\
   (abort (), (typeof(*mem)) 0)
-# else
-#  define __arch_exchange_and_add_64_int(mem, value, model)	\
+#else
+# define __arch_exchange_and_add_64_int(mem, value, model)	\
   __atomic_fetch_add (mem, value, model)
-# endif
+#endif
 
-# define atomic_exchange_and_add_acq(mem, value)			\
+#define atomic_exchange_and_add_acq(mem, value)			\
   __atomic_val_bysize (__arch_exchange_and_add, int, mem, value,	\
 		       __ATOMIC_ACQUIRE)
 
-# define atomic_exchange_and_add_rel(mem, value)			\
+#define atomic_exchange_and_add_rel(mem, value)			\
   __atomic_val_bysize (__arch_exchange_and_add, int, mem, value,	\
 		       __ATOMIC_RELEASE)
 
-#else /* !__mips16 && !__GNUC_PREREQ (4, 8) */
-/* This implementation using inline assembly will be removed once glibc
-   requires GCC 4.8 or later to build.  */
-
-# define USE_ATOMIC_COMPILER_BUILTINS 0
-# define ATOMIC_EXCHANGE_USES_CAS 1
-
-/* Compare and exchange.  For all of the "xxx" routines, we expect a
-   "__prev" and a "__cmp" variable to be provided by the enclosing scope,
-   in which values are returned.  */
-
-# define __arch_compare_and_exchange_xxx_8_int(mem, newval, oldval, rel, acq) \
-  (abort (), __prev = 0, __cmp = 0, (void) __cmp)
-
-# define __arch_compare_and_exchange_xxx_16_int(mem, newval, oldval, rel, acq) \
-  (abort (), __prev = 0, __cmp = 0, (void) __cmp)
-
-# define __arch_compare_and_exchange_xxx_32_int(mem, newval, oldval, rel, acq) \
-     __asm__ __volatile__ (						      \
-     ".set	push\n\t"						      \
-     MIPS_PUSH_MIPS2							      \
-     rel	"\n"							      \
-     "1:\t"								      \
-     "ll	%0,%5\n\t"						      \
-     "move	%1,$0\n\t"						      \
-     "bne	%0,%3,2f\n\t"						      \
-     "move	%1,%4\n\t"						      \
-     "sc	%1,%2\n\t"						      \
-     R10K_BEQZ_INSN"	%1,1b\n"					      \
-     acq	"\n\t"							      \
-     ".set	pop\n"							      \
-     "2:\n\t"								      \
-	      : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem)		      \
-	      : "r" (oldval), "r" (newval), "m" (*mem)			      \
-	      : "memory")
-
-# if _MIPS_SIM == _ABIO32
-/* We can't do an atomic 64-bit operation in O32.  */
-# define __arch_compare_and_exchange_xxx_64_int(mem, newval, oldval, rel, acq) \
-  (abort (), __prev = 0, __cmp = 0, (void) __cmp)
-# else
-# define __arch_compare_and_exchange_xxx_64_int(mem, newval, oldval, rel, acq) \
-     __asm__ __volatile__ ("\n"						      \
-     ".set	push\n\t"						      \
-     MIPS_PUSH_MIPS2							      \
-     rel	"\n"							      \
-     "1:\t"								      \
-     "lld	%0,%5\n\t"						      \
-     "move	%1,$0\n\t"						      \
-     "bne	%0,%3,2f\n\t"						      \
-     "move	%1,%4\n\t"						      \
-     "scd	%1,%2\n\t"						      \
-     R10K_BEQZ_INSN"	%1,1b\n"					      \
-     acq	"\n\t"							      \
-     ".set	pop\n"							      \
-     "2:\n\t"								      \
-	      : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem)		      \
-	      : "r" (oldval), "r" (newval), "m" (*mem)			      \
-	      : "memory")
-# endif
-
-/* For all "bool" routines, we return FALSE if exchange succesful.  */
-
-# define __arch_compare_and_exchange_bool_8_int(mem, new, old, rel, acq) \
-({ typeof (*mem) __prev __attribute__ ((unused)); int __cmp;		\
-   __arch_compare_and_exchange_xxx_8_int(mem, new, old, rel, acq);	\
-   !__cmp; })
-
-# define __arch_compare_and_exchange_bool_16_int(mem, new, old, rel, acq) \
-({ typeof (*mem) __prev __attribute__ ((unused)); int __cmp;		\
-   __arch_compare_and_exchange_xxx_16_int(mem, new, old, rel, acq);	\
-   !__cmp; })
-
-# define __arch_compare_and_exchange_bool_32_int(mem, new, old, rel, acq) \
-({ typeof (*mem) __prev __attribute__ ((unused)); int __cmp;		\
-   __arch_compare_and_exchange_xxx_32_int(mem, new, old, rel, acq);	\
-   !__cmp; })
-
-# define __arch_compare_and_exchange_bool_64_int(mem, new, old, rel, acq) \
-({ typeof (*mem) __prev __attribute__ ((unused)); int __cmp;		\
-   __arch_compare_and_exchange_xxx_64_int(mem, new, old, rel, acq);	\
-   !__cmp; })
-
-/* For all "val" routines, return the old value whether exchange
-   successful or not.  */
-
-# define __arch_compare_and_exchange_val_8_int(mem, new, old, rel, acq)	\
-({ typeof (*mem) __prev; int __cmp;					\
-   __arch_compare_and_exchange_xxx_8_int(mem, new, old, rel, acq);	\
-   (typeof (*mem))__prev; })
-
-# define __arch_compare_and_exchange_val_16_int(mem, new, old, rel, acq) \
-({ typeof (*mem) __prev; int __cmp;					\
-   __arch_compare_and_exchange_xxx_16_int(mem, new, old, rel, acq);	\
-   (typeof (*mem))__prev; })
-
-# define __arch_compare_and_exchange_val_32_int(mem, new, old, rel, acq) \
-({ typeof (*mem) __prev; int __cmp;					\
-   __arch_compare_and_exchange_xxx_32_int(mem, new, old, rel, acq);	\
-   (typeof (*mem))__prev; })
-
-# define __arch_compare_and_exchange_val_64_int(mem, new, old, rel, acq) \
-({ typeof (*mem) __prev; int __cmp;					\
-   __arch_compare_and_exchange_xxx_64_int(mem, new, old, rel, acq);	\
-   (typeof (*mem))__prev; })
-
-/* Compare and exchange with "acquire" semantics, ie barrier after.  */
-
-# define atomic_compare_and_exchange_bool_acq(mem, new, old)	\
-  __atomic_bool_bysize (__arch_compare_and_exchange_bool, int,	\
-		        mem, new, old, "", MIPS_SYNC_STR)
-
-# define atomic_compare_and_exchange_val_acq(mem, new, old)	\
-  __atomic_val_bysize (__arch_compare_and_exchange_val, int,	\
-		       mem, new, old, "", MIPS_SYNC_STR)
-
-/* Compare and exchange with "release" semantics, ie barrier before.  */
-
-# define atomic_compare_and_exchange_val_rel(mem, new, old)	\
-  __atomic_val_bysize (__arch_compare_and_exchange_val, int,	\
-		       mem, new, old, MIPS_SYNC_STR, "")
-
-
-
-/* Atomic exchange (without compare).  */
-
-# define __arch_exchange_xxx_8_int(mem, newval, rel, acq) \
-  (abort (), (typeof(*mem)) 0)
-
-# define __arch_exchange_xxx_16_int(mem, newval, rel, acq) \
-  (abort (), (typeof(*mem)) 0)
-
-# define __arch_exchange_xxx_32_int(mem, newval, rel, acq) \
-({ typeof (*mem) __prev; int __cmp;					      \
-     __asm__ __volatile__ ("\n"						      \
-     ".set	push\n\t"						      \
-     MIPS_PUSH_MIPS2							      \
-     rel	"\n"							      \
-     "1:\t"								      \
-     "ll	%0,%4\n\t"						      \
-     "move	%1,%3\n\t"						      \
-     "sc	%1,%2\n\t"						      \
-     R10K_BEQZ_INSN"	%1,1b\n"					      \
-     acq	"\n\t"							      \
-     ".set	pop\n"							      \
-     "2:\n\t"								      \
-	      : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem)		      \
-	      : "r" (newval), "m" (*mem)				      \
-	      : "memory");						      \
-  __prev; })
-
-# if _MIPS_SIM == _ABIO32
-/* We can't do an atomic 64-bit operation in O32.  */
-#  define __arch_exchange_xxx_64_int(mem, newval, rel, acq) \
-  (abort (), (typeof(*mem)) 0)
-# else
-#  define __arch_exchange_xxx_64_int(mem, newval, rel, acq) \
-({ typeof (*mem) __prev; int __cmp;					      \
-     __asm__ __volatile__ ("\n"						      \
-     ".set	push\n\t"						      \
-     MIPS_PUSH_MIPS2							      \
-     rel	"\n"							      \
-     "1:\n"								      \
-     "lld	%0,%4\n\t"						      \
-     "move	%1,%3\n\t"						      \
-     "scd	%1,%2\n\t"						      \
-     R10K_BEQZ_INSN"	%1,1b\n"					      \
-     acq	"\n\t"							      \
-     ".set	pop\n"							      \
-     "2:\n\t"								      \
-	      : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem)		      \
-	      : "r" (newval), "m" (*mem)				      \
-	      : "memory");						      \
-  __prev; })
-# endif
-
-# define atomic_exchange_acq(mem, value) \
-  __atomic_val_bysize (__arch_exchange_xxx, int, mem, value, "", MIPS_SYNC_STR)
-
-# define atomic_exchange_rel(mem, value) \
-  __atomic_val_bysize (__arch_exchange_xxx, int, mem, value, MIPS_SYNC_STR, "")
-
-
-/* Atomically add value and return the previous (unincremented) value.  */
-
-# define __arch_exchange_and_add_8_int(mem, newval, rel, acq) \
-  (abort (), (typeof(*mem)) 0)
-
-# define __arch_exchange_and_add_16_int(mem, newval, rel, acq) \
-  (abort (), (typeof(*mem)) 0)
-
-# define __arch_exchange_and_add_32_int(mem, value, rel, acq) \
-({ typeof (*mem) __prev; int __cmp;					      \
-     __asm__ __volatile__ ("\n"						      \
-     ".set	push\n\t"						      \
-     MIPS_PUSH_MIPS2							      \
-     rel	"\n"							      \
-     "1:\t"								      \
-     "ll	%0,%4\n\t"						      \
-     "addu	%1,%0,%3\n\t"						      \
-     "sc	%1,%2\n\t"						      \
-     R10K_BEQZ_INSN"	%1,1b\n"					      \
-     acq	"\n\t"							      \
-     ".set	pop\n"							      \
-     "2:\n\t"								      \
-	      : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem)		      \
-	      : "r" (value), "m" (*mem)					      \
-	      : "memory");						      \
-  __prev; })
-
-# if _MIPS_SIM == _ABIO32
-/* We can't do an atomic 64-bit operation in O32.  */
-#  define __arch_exchange_and_add_64_int(mem, value, rel, acq) \
-  (abort (), (typeof(*mem)) 0)
-# else
-#  define __arch_exchange_and_add_64_int(mem, value, rel, acq) \
-({ typeof (*mem) __prev; int __cmp;					      \
-     __asm__ __volatile__ (						      \
-     ".set	push\n\t"						      \
-     MIPS_PUSH_MIPS2							      \
-     rel	"\n"							      \
-     "1:\t"								      \
-     "lld	%0,%4\n\t"						      \
-     "daddu	%1,%0,%3\n\t"						      \
-     "scd	%1,%2\n\t"						      \
-     R10K_BEQZ_INSN"	%1,1b\n"					      \
-     acq	"\n\t"							      \
-     ".set	pop\n"							      \
-     "2:\n\t"								      \
-	      : "=&r" (__prev), "=&r" (__cmp), "=m" (*mem)		      \
-	      : "r" (value), "m" (*mem)					      \
-	      : "memory");						      \
-  __prev; })
-# endif
-
-# define atomic_exchange_and_add_acq(mem, value)			\
-  __atomic_val_bysize (__arch_exchange_and_add, int, mem, value,	\
-		       "", MIPS_SYNC_STR)
-
-# define atomic_exchange_and_add_rel(mem, value)			\
-  __atomic_val_bysize (__arch_exchange_and_add, int, mem, value,	\
-		       MIPS_SYNC_STR, "")
-
-#endif /* !__mips16 && !__GNUC_PREREQ (4, 8) */
-
 /* TODO: More atomic operations could be implemented efficiently; only the
    basic requirements are done.  */
 
diff --git a/sysdeps/mips/math-tests.h b/sysdeps/mips/math-tests.h
index 7680db21ee..8a1055f4d7 100644
--- a/sysdeps/mips/math-tests.h
+++ b/sysdeps/mips/math-tests.h
@@ -19,10 +19,7 @@
 #include <features.h>
 #include <sgidefs.h>
 
-/* MIPS soft float does not support exceptions and rounding modes, and
-   before GCC 4.9 long double when wider than double is implemented
-   using fp-bit which does not integrate with hardware exceptions and
-   rounding modes.  */
+/* MIPS soft float does not support exceptions and rounding modes.  */
 #ifdef __mips_soft_float
 # define ROUNDING_TESTS_float(MODE)	((MODE) == FE_TONEAREST)
 # define ROUNDING_TESTS_double(MODE)	((MODE) == FE_TONEAREST)
@@ -30,9 +27,6 @@
 # define EXCEPTION_TESTS_float	0
 # define EXCEPTION_TESTS_double	0
 # define EXCEPTION_TESTS_long_double	0
-#elif _MIPS_SIM != _ABIO32 && !__GNUC_PREREQ (4, 9)
-# define ROUNDING_TESTS_long_double(MODE)	((MODE) == FE_TONEAREST)
-# define EXCEPTION_TESTS_long_double	0
 #endif
 
 /* NaN payload preservation when converting a signaling NaN to quiet