summaryrefslogtreecommitdiff
path: root/git.c
Commit message (Collapse)AuthorAgeFilesLines
* Replace calls to strbuf_init(&foo, 0) with STRBUF_INIT initializerBrandon Casey2008-10-121-2/+1
| | | | | | | | | | | Many call sites use strbuf_init(&foo, 0) to initialize local strbuf variable "foo" which has not been accessed since its declaration. These can be replaced with a static initialization using the STRBUF_INIT macro which is just as readable, saves a function call, and takes up fewer lines. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* Merge branch 'jc/alternate-push'Shawn O. Pearce2008-09-251-0/+1
|\ | | | | | | | | | | | | | | * jc/alternate-push: push: receiver end advertises refs from alternate repositories push: prepare sender to receive extended ref information from the receiver receive-pack: make it a builtin is_directory(): a generic helper function
| * receive-pack: make it a builtinJunio C Hamano2008-09-091-0/+1
| | | | | | | | | | | | | | It is a good thing to do in general, but more importantly, transport routines can only be used by built-ins, which is what I'll be adding next. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'maint'Shawn O. Pearce2008-09-251-0/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | * maint: Update release notes for 1.6.0.3 checkout: Do not show local changes when in quiet mode for-each-ref: Fix --format=%(subject) for log message without newlines git-stash.sh: don't default to refs/stash if invalid ref supplied maint: check return of split_cmdline to avoid bad config strings
| * | maint: check return of split_cmdline to avoid bad config stringsDeskin Miller2008-09-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the testcase demonstrates, it's possible for split_cmdline to return -1 and deallocate any memory it's allocated, if the config string is missing an end quote. In both the cases below, which are the only calling sites, the return isn't checked, and using the pointer causes a pretty immediate segfault. Signed-off-by: Deskin Miller <deskinm@umich.edu> Acked-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* | | Use xmalloc() and friends to catch allocation failuresDotan Barak2008-09-091-1/+1
| |/ |/| | | | | | | | | | | | | | | Some places use the standard malloc/strdup without checking if the allocation was successful; they should use xmalloc/xstrdup that check the memory allocation result. Signed-off-by: Dotan Barak <dotanba@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'ar/autospell'Junio C Hamano2008-09-071-1/+3
|\ \ | |/ |/| | | | | | | * ar/autospell: Add help.autocorrect to enable/disable autocorrecting git wrapper: DWIM mistyped commands
| * git wrapper: DWIM mistyped commandsJohannes Schindelin2008-08-311-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a modified Damerau-Levenshtein algorithm into Git's code base, and uses it with the following penalties to show some similar commands when an unknown command was encountered: swap = 0, insertion = 1, substitution = 2, deletion = 4 A typical output would now look like this: $ git sm git: 'sm' is not a git-command. See 'git --help'. Did you mean one of these? am rm The cut-off is at similarity rating 6, which was empirically determined to give sensible results. As a convenience, if there is only one candidate, Git continues under the assumption that the user mistyped it. Example: $ git reabse WARNING: You called a Git program named 'reabse', which does not exist. Continuing under the assumption that you meant 'rebase' [...] Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Revert "Build-in "git-shell""Junio C Hamano2008-08-251-1/+0
| | | | | | | | | | | | | | This reverts commit daa0cc9a92c9c2c714aa5f7da6d0ff65b93e0698. It was a stupid idea to do this; when run as a log-in shell, it is spawned with argv[0] set to "-git-shell", so the usual name-based dispatch would not work to begin with.
| * Build-in "git-shell"Junio C Hamano2008-08-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | This trivially makes "git-shell" a built-in. It makes the executable even fatter, though. And MinGW removed git-shell only because of the funny dependencies; there is no reason to do so anymore. Signed-off-by: Junio C Hamano <gitster@pobox.com> Tested-on-MinGW-by: Johannes Sixt <johannes.sixt@telecom.at>
* | diff*: fix worktree setupNguyễn Thái Ngọc Duy2008-08-281-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | This fixes "git diff", "git diff-files" and "git diff-index" to work correctly under worktree setup. Because diff* family works in many modes and not all of them require worktree, Junio made a nice summary (with a little modification from me): * diff-files is about comparing with work tree, so it obviously needs a work tree; * diff-index also does, except "diff-index --cached" or "diff --cached TREE" * no-index is about random files outside git context, so it obviously doesn't need any work tree; * comparing two (or more) trees doesn't; * comparing two blobs doesn't; * comparing a blob with a random file doesn't; Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Record the command invocation path earlyJohannes Sixt2008-07-251-3/+2
| | | | | | | | | | | | | | | | | | | We will need the command invocation path in system_path(). This path was passed to setup_path(), but system_path() can be called earlier, for example via: main commit_pager_choice setup_pager git_config git_etc_gitconfig system_path Therefore, we introduce git_set_argv0_path() and call it as soon as possible. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Revert "make git-status use a pager"Junio C Hamano2008-07-211-1/+1
| | | | | | | This reverts commit c8af1de9cfa0a5678ae766777e0f905e60b69fda. The change was immensely unpopular, and poeple who would really want to page can use pager.status configuration.
* Merge branch 'mv/merge-in-c'Junio C Hamano2008-07-151-53/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * mv/merge-in-c: reduce_heads(): protect from duplicate input reduce_heads(): thinkofix Add a new test for git-merge-resolve t6021: add a new test for git-merge-resolve Teach merge.log to "git-merge" again Build in merge Fix t7601-merge-pull-config.sh on AIX git-commit-tree: make it usable from other builtins Add new test case to ensure git-merge prepends the custom merge message Add new test case to ensure git-merge reduces octopus parents when possible Introduce reduce_heads() Introduce get_merge_bases_many() Add new test to ensure git-merge handles more than 25 refs. Introduce get_octopus_merge_bases() in commit.c git-fmt-merge-msg: make it usable from other builtins Move read_cache_unmerged() to read-cache.c Add new test to ensure git-merge handles pull.twohead and pull.octopus Move parse-options's skip_prefix() to git-compat-util.h Move commit_list_count() to commit.c Move split_cmdline() to alias.c Conflicts: Makefile parse-options.c
| * Build in mergeMiklos Vajna2008-07-071-0/+1
| | | | | | | | | | | | Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Move split_cmdline() to alias.cMiklos Vajna2008-06-301-53/+0
| | | | | | | | | | | | | | | | | | | | split_cmdline() is currently used for aliases only, but later it can be useful for other builtins as well. Move it to alias.c for now, indicating that originally it's for aliases, but we'll have it in libgit this way. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Allow per-command pager configJeff King2008-07-061-4/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is great debate over whether some commands should set up a pager automatically. This patch allows individuals to set their own pager preferences for each command, overriding the default. For example, to disable the pager for git status: git config pager.status false If "--pager" or "--no-pager" is specified on the command line, it takes precedence over the config option. There are two caveats: - you can turn on the pager for plumbing commands. Combined with "core.pager = always", this will probably break a lot of things. Don't do it. - This only works for builtin commands. The reason is somewhat complex: Calling git_config before we do setup_git_directory has bad side effects, because it wants to know where the git_dir is to find ".git/config". Unfortunately, we cannot call setup_git_directory indiscriminately, because some builtins (like "init") break if we do. For builtins, this is OK, since we can just wait until after we call setup_git_directory. But for aliases, we don't know until we expand (recursively) which command we're doing. This should not be a huge problem for aliases, which can simply use "--pager" or "--no-pager" in the alias as appropriate. For external commands, however, we don't know we even have an external command until we exec it, and by then it is too late to check the config. An alternative approach would be to have a config mode where we don't bother looking at .git/config, but only at the user and system config files. This would make the behavior consistent across builtins, aliases, and external commands, at the cost of not allowing per-repo pager config for at all. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'j6t/mingw'Junio C Hamano2008-07-021-3/+16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * j6t/mingw: (38 commits) compat/pread.c: Add a forward declaration to fix a warning Windows: Fix ntohl() related warnings about printf formatting Windows: TMP and TEMP environment variables specify a temporary directory. Windows: Make 'git help -a' work. Windows: Work around an oddity when a pipe with no reader is written to. Windows: Make the pager work. When installing, be prepared that template_dir may be relative. Windows: Use a relative default template_dir and ETC_GITCONFIG Windows: Compute the fallback for exec_path from the program invocation. Turn builtin_exec_path into a function. Windows: Use a customized struct stat that also has the st_blocks member. Windows: Add a custom implementation for utime(). Windows: Add a new lstat and fstat implementation based on Win32 API. Windows: Implement a custom spawnve(). Windows: Implement wrappers for gethostbyname(), socket(), and connect(). Windows: Work around incompatible sort and find. Windows: Implement asynchronous functions as threads. Windows: Disambiguate DOS style paths from SSH URLs. Windows: A rudimentary poll() emulation. Windows: Implement start_command(). ...
| * | Windows: Strip ".exe" from the program name.Johannes Sixt2008-06-231-3/+16
| |/ | | | | | | | | | | | | | | | | | | Before we can successfully parse a builtin command from the program name we must strip off unneeded parts, that is, the file extension. Furthermore, we must take Windows style path names into account when we parse the program name. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
* | Prepare execv_git_cmd() for removal of builtins from the filesystemJunio C Hamano2008-06-231-1/+31
|/ | | | | | | | | Currently, execv_git_cmd() always try running the dashed form, which means we cannot easily remove the git-foo hardlinks for built-in commands. This updates the function to always exec "git foo" form, and makes sure "git" potty does not infinitely recurse to itself. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Ignore .gitattributes in bare repositoriesRené Scharfe2008-06-091-1/+1
| | | | | | | | | | | | | | | | | | Attributes can be specified at three different places: the internal table of default values, the file $GIT_DIR/info/attributes and files named .gitattributes in the work tree. Since bare repositories don't have a work tree, git should ignore any .gitattributes files there. This patch makes git do that, so the only way left for a user to specify attributes in a bare repository is the file info/attributes (in addition to changing the defaults and recompiling). In addition, git-check-attr is now allowed to run without a work tree. Like any user of the code in attr.c, it ignores the .gitattributes files when run in a bare repository. It can still read from info/attributes. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Print info about "git help COMMAND" on git's main usage pagesTeemu Likonen2008-06-061-0/+4
| | | | | | | | | | Git's main usage pages did not show "git help" as a way to get more information on a specific subcommand. This patch adds an info line after the list of git commands currently printed by "git", "git help", "git --help" and "git help --all". Signed-off-by: Teemu Likonen <tlikonen@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'jc/diff-no-no-index'Junio C Hamano2008-05-261-1/+1
|\ | | | | | | | | | | | | | | | | * jc/diff-no-no-index: git diff --no-index: default to page like other diff frontends git-diff: allow --no-index semantics a bit more "git diff": do not ignore index without --no-index diff-files: do not play --no-index games tests: do not use implicit "git diff --no-index"
| * diff-files: do not play --no-index gamesJunio C Hamano2008-05-241-1/+1
| | | | | | | | | | | | | | | | | | | | Being able to say "git diff A B" outside a git repository and getting a colourful version of "diff -u A B" may be nice, but such a cute hack should not give bogus results to scripts that want to give two paths, either or both of which happen to have been removed from the work tree, to "git diff-files". Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Build in cloneDaniel Barkalow2008-05-041-0/+1
|/ | | | | | | Thanks to Johannes Schindelin for various comments and improvements, including supporting cloning full bundles. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* make git-status use a pagerBart Trojanowski2008-04-291-1/+1
| | | | | | | | make git status act similar to git log and git diff by presenting long output in a pager. Signed-off-by: Bart Trojanowski <bart@jukie.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Accept git aliases outside a git repositoryJunio C Hamano2008-04-011-1/+2
| | | | | | | | | | | | | af05d67 (Always set *nongit_ok in setup_git_directory_gently(), 2008-03-25) had a change from the patch originally submitted that resulted in disabling aliases outside a git repository. It turns out that some people used "alias.fubar = diff --color-words" in $HOME/.gitconfig to use non-index diff (or any command that do not need git repository) outside git repositories, and this change broke them, so this resurrects the support for such usage. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Always set *nongit_ok in setup_git_directory_gently()SZEDER Gábor2008-03-261-2/+2
| | | | | | | | | | | | setup_git_directory_gently() only modified the value of its *nongit_ok argument if we were not in a git repository. Now it will always set it to 0 when we are inside a repository. Also remove now unnecessary initializations in the callers of this function. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* shortlog: do not require to run from inside a git repositoryJonas Fonseca2008-03-151-1/+1
| | | | | | | | | Once upon a time shortlog could be run from a non-git directory and still do its job. Fix this regression and add a small test for it. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Make git-remote a builtinJohannes Schindelin2008-03-011-0/+1
| | | | | Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'db/checkout'Junio C Hamano2008-02-271-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * db/checkout: (21 commits) checkout: error out when index is unmerged even with -m checkout: show progress when checkout takes long time while switching branches Add merge-subtree back checkout: updates to tracking report builtin-checkout.c: Remove unused prefix arguments in switch_branches path checkout: work from a subdirectory checkout: tone down the "forked status" diagnostic messages Clean up reporting differences on branch switch builtin-checkout.c: fix possible usage segfault checkout: notice when the switched branch is behind or forked Build in checkout Move code to clean up after a branch change to branch.c Library function to check for unmerged index entries Use diff -u instead of diff in t7201 Move create_branch into a library file Build-in merge-recursive Add "skip_unmerged" option to unpack_trees. Discard "deleted" cache entries after using them to update the working tree Send unpack-trees debugging output to stderr Add flag to make unpack_trees() not print errors. ... Conflicts: Makefile
| * Add merge-subtree backJunio C Hamano2008-02-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | An earlier commit e1b3a2c (Build-in merge-recursive) made the subtree merge strategy backend unavailable. This resurrects it. A new test t6029 currently only tests the strategy is available, but it should be enhanced to check the real "subtree" case. Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Build in checkoutDaniel Barkalow2008-02-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only differences in behavior should be: - git checkout -m with non-trivial merging won't print out merge-recursive messages (see the change in t7201-co.sh) - git checkout -- paths... will give a sensible error message if HEAD is invalid as a commit. - some intermediate states which were written to disk in the shell version (in particular, index states) are only kept in memory in this version, and therefore these can no longer be revealed by later write operations becoming impossible. - when we change branches, we discard MERGE_MSG, SQUASH_MSG, and rr-cache/MERGE_RR, like reset always has. I'm not 100% sure I got the merge recursive setup exactly right; the base for a non-trivial merge in the shell code doesn't seem theoretically justified to me, but I tried to match it anyway, and the tests all pass this way. Other than these items, the results should be identical to the shell version, so far as I can tell. [jc: squashed lock-file fix from Dscho in] Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Build-in merge-recursiveDaniel Barkalow2008-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes write_tree_from_memory(), which writes the active cache as a tree and returns the struct tree for it, available to other code. It also makes available merge_trees(), which does the internal merge of two trees with a known base, and merge_recursive(), which does the recursive internal merge of two commits with a list of common ancestors. The first two of these will be used by checkout -m, and the third is presumably useful in general, although the implementation of checkout -m which entirely matches the behavior of the shell version does not use it (since it ignores the difference of ancestry between the old branch and the new branch). Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
* | make alias lookup a public, procedural functionJeff King2008-02-241-14/+3
| | | | | | | | | | | | | | | | | | | | | | | | This converts git_config_alias to the public alias_lookup function. Because of the nature of our config parser, we still have to rely on setting static data. However, that interface is wrapped so that you can just say value = alias_lookup(key); Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | git.c: guard config parser from value=NULLJunio C Hamano2008-02-111-0/+2
|/ | | | | | alias.* configuration expects a string value Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'kh/commit'Junio C Hamano2007-12-041-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * kh/commit: (33 commits) git-commit --allow-empty git-commit: Allow to amend a merge commit that does not change the tree quote_path: fix collapsing of relative paths Make git status usage say git status instead of git commit Fix --signoff in builtin-commit differently. git-commit: clean up die messages Do not generate full commit log message if it is not going to be used Remove git-status from list of scripts as it is builtin Fix off-by-one error when truncating the diff out of the commit message. builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well. Add a few more tests for git-commit builtin-commit: Include the diff in the commit message when verbose. builtin-commit: fix partial-commit support Fix add_files_to_cache() to take pathspec, not user specified list of files Export three helper functions from ls-files builtin-commit: run commit-msg hook with correct message file builtin-commit: do not color status output shown in the message template file_exists(): dangling symlinks do exist Replace "runstatus" with "status" in the tests t7501-commit: Add test for git commit <file> with dirty index. ...
| * Port git commit to C.Kristian Høgsberg2007-11-221-1/+2
| | | | | | | | | | | | | | | | | | This makes git commit a builtin and moves git-commit.sh to contrib/examples. This also removes the git-runstatus helper, which was mostly just a git-status.sh implementation detail. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Trace and quote with argv: get rid of unneeded count argument.Christian Couder2007-12-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that str_buf takes care of all the allocations, there is no more gain to pass an argument count. So this patch removes the "count" argument from: - "sq_quote_argv" - "trace_argv_printf" and all the callers. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Add 'git fast-export', the sister of 'git fast-import'Johannes Schindelin2007-12-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This program dumps (parts of) a git repository in the format that fast-import understands. For clarity's sake, it does not use the 'inline' method of specifying blobs in the commits, but builds the blobs before building the commits. Since signed tags' signatures will not necessarily be valid (think transformations after the export, or excluding revisions, changing the history), there are 4 modes to handle them: abort (default), ignore, warn and strip. The latter just turns the tags into unsigned ones. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'jk/send-pack'Junio C Hamano2007-11-241-0/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * jk/send-pack: (24 commits) send-pack: cluster ref status reporting send-pack: fix "everything up-to-date" message send-pack: tighten remote error reporting make "find_ref_by_name" a public function Fix warning about bitfield in struct ref send-pack: assign remote errors to each ref send-pack: check ref->status before updating tracking refs send-pack: track errors for each ref git-push: add documentation for the newly added --mirror mode Add tests for git push'es mirror mode Update the tracking references only if they were succesfully updated on remote Add a test checking if send-pack updated local tracking branches correctly git-push: plumb in --mirror mode Teach send-pack a mirror mode send-pack: segfault fix on forced push Reteach builtin-ls-remote to understand remotes send-pack: require --verbose to show update of tracking refs receive-pack: don't mention successful updates more terse push output Build in ls-remote ...
| * \ Merge branch 'db/remote-builtin' into jk/send-packJunio C Hamano2007-11-141-0/+3
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * db/remote-builtin: Reteach builtin-ls-remote to understand remotes Build in ls-remote Use built-in send-pack. Build-in send-pack, with an API for other programs to call. Build-in peek-remote, using transport infrastructure. Miscellaneous const changes and utilities Conflicts: transport.c
| | * | Build in ls-remoteDaniel Barkalow2007-11-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This actually replaces peek-remote with ls-remote, since peek-remote now handles everything. peek-remote remains an a second name for ls-remote, although its help message now gives the "ls-remote" name. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| | * | Build-in send-pack, with an API for other programs to call.Daniel Barkalow2007-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Also marks some more things as const, as needed. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| | * | Build-in peek-remote, using transport infrastructure.Daniel Barkalow2007-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | Merge branch 'sb/clean'Junio C Hamano2007-11-241-0/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * sb/clean: Teach git clean to use setup_standard_excludes() git-clean: Fix error message if clean.requireForce is not set. Make git-clean a builtin
| * | | | Make git-clean a builtinShawn Bohrer2007-11-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This replaces git-clean.sh with builtin-clean.c, and moves git-clean.sh to the examples. This also introduces a change in behavior when removing directories explicitly specified as a path. For example currently: 1. When dir has only untracked files, these two behave differently: $ git clean -n dir $ git clean -n dir/ the former says "Would not remove dir/", while the latter would say "Would remove dir/untracked" for all paths under it, but not the directory itself. With -d, the former would stop refusing, however since the user explicitly asked to remove the directory the -d is no longer required. 2. When there are more parameters: $ git clean -n dir foo $ git clean -n dir/ foo both cases refuse to remove dir/ unless -d is specified. Once again since both cases requested to remove dir the -d is no longer required. Thanks to Johannes Schindelin for the conversion to using the parse-options API. Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | Merge branch 'js/mingw-fallouts'Junio C Hamano2007-11-241-1/+1
|\ \ \ \ \ | |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * js/mingw-fallouts: fetch-pack: Prepare for a side-band demultiplexer in a thread. rehabilitate some t5302 tests on 32-bit off_t machines Allow ETC_GITCONFIG to be a relative path. Introduce git_etc_gitconfig() that encapsulates access of ETC_GITCONFIG. Allow a relative builtin template directory. Close files opened by lock_file() before unlinking. builtin run_command: do not exit with -1. Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h. Use is_absolute_path() in sha1_file.c. Skip t3902-quoted.sh if the file system does not support funny names. t5302-pack-index: Skip tests of 64-bit offsets if necessary. t7501-commit.sh: Not all seds understand option -i t5300-pack-object.sh: Split the big verify-pack test into smaller parts.
| * | | | builtin run_command: do not exit with -1.Johannes Sixt2007-11-141-1/+1
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | There are shells that do not correctly detect an exit code of -1 as a failure. We simply truncate the status code to the lower 8 bits. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | git-merge-ours: make it a builtin.Thomas Harning2007-11-221-0/+1
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | Except that this fixes a longstanding corner case bug by tightening the way underlying diff-index command is run, it is functionally equivalent to the scripted version. Signed-off-by: Thomas Harning Jr <harningt@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
View Lorry Controller Status