| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The diff-so-fancy project is also written in perl, and most
of its users pipe diffs through both diff-highlight and
diff-so-fancy. It would be nice if this could be done in a
single script. So let's pull most of diff-highlight's code
into its own module which can be used by diff-so-fancy.
In addition, we'll abstract a few basic items like reading
from stdio so that a script using the module can do more
processing before or after diff-highlight handles the lines.
See the README update for more details.
One small downside is that the diff-highlight script must
now be built using the Makefile. There are ways around this,
but it quickly gets into perl arcana. Let's go with the
simple solution. As a bonus, our Makefile now respects the
PERL_PATH variable if it is set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\
| |
| |
| |
| |
| |
| | |
Completion update.
* rf/completion-config-commit:
completion: add completions for git config commit
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add missing completions for git config:
* commit.cleanup
* commit.gpgSign
* commit.verbose
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The interaction of "url.*.insteadOf" and custom URL scheme's
whitelisting is now documented better.
* jk/url-insteadof-config:
docs/config: mention protocol implications of url.insteadOf
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
If a URL rewrite switches the protocol to something
nonstandard (like "persistent-https" for "https"), the user
may be bitten by the fact that the default protocol
restrictions are different between the two. Let's drop a
note in insteadOf that points the user in the right
direction.
It would be nice if we could make this work out of the box,
but we can't without knowing the security implications of
the user's rewrite. Only the documentation for a particular
remote helper can advise one way or the other. Since we do
include the persistent-https helper in contrib/ (and since
it was the helper in the real-world case that inspired that
patch), let's also drop a note there.
Suggested-by: Elliott Cable <me@ell.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The shell completion script (in contrib/) learned "git stash" has
a new "push" subcommand.
* tg/stash-push-fixup:
completion: add git stash push
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When introducing git stash push in f5727e26e4 ("stash: introduce push
verb", 2017-02-19), I forgot to add it to the completion code. Add it
now.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Without this change, the completion script does not work, as Bash expects
its scripts to have line feeds as end-of-line markers (this is
particularly prominent in quoted multi-line strings, where carriage
returns would slip into the strings as verbatim characters otherwise).
This change is required to let t9902-completion pass when Git's source
code is checked out with `core.autocrlf = true`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |/
|/|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Bash does not handle scripts with CR/LF line endings correctly, therefore
they *have* to be forced to LF-only line endings.
Funnily enough, this fixes t3000-ls-files-others and
t1021-rerere-in-workdir when git.git was checked out with
core.autocrlf=true, as these test still use git-new-workdir (once `git
worktree` is no longer marked as experimental, both scripts probably
want to be ported to using that command instead).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Completion for "git checkout <branch>" that auto-creates the branch
out of a remote tracking branch can now be disabled, as this
completion often gets in the way when completing to checkout an
existing local branch that happens to share the same prefix with
bunch of remote tracking branches.
* jk/complete-checkout-sans-dwim-remote:
completion: optionally disable checkout DWIM
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When we complete branch names for "git checkout", we also
complete remote branch names that could trigger the DWIM
behavior. Depending on your workflow and project, this can
be either convenient or annoying.
For instance, my clone of gitster.git contains 74 local
"jk/*" branches, but origin contains another 147. When I
want to checkout a local branch but can't quite remember the
name, tab completion shows me 251 entries. And worse, for a
topic that has been picked up for pu, the upstream branch
name is likely to be similar to mine, leading to a high
probability that I pick the wrong one and accidentally
create a new branch.
This patch adds a way for the user to tell the completion
code not to include DWIM suggestions for checkout. This can
already be done by typing:
git checkout --no-guess jk/<TAB>
but that's rather cumbersome. The downside, of course, is
that you no longer get completion support when you _do_ want
to invoke the DWIM behavior. But depending on your workflow,
that may not be a big loss (for instance, in git.git I am
much more likely to want to detach, so I'd type "git
checkout origin/jk/<TAB>" anyway).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Change the completion of "push --delete <remote> <ref>" to complete
refs on that <remote>, not all refs.
Before this cloning git.git and doing "git push --delete origin
p<TAB>" will complete nothing, since a fresh clone of git.git will
have no "pu" branch, whereas origin/p<TAB> will uselessly complete
origin/pu, but fully qualified references aren't accepted by
"--delete".
Now p<TAB> will complete as "pu". The completion of giving --delete
later, e.g. "git push origin --delete p<TAB>" remains unchanged, this
is a bug, but is a general existing limitation of the bash completion,
and not how git-push is documented, so I'm not fixing that case, but
adding a failing TODO test for it.
The testing code was supplied by SZEDER Gábor in
<20170421122832.24617-1-szeder.dev@gmail.com> with minor setup
modifications on my part.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Test-code-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | | |
Code cleanup.
* jc/bs-t-is-not-a-tab-for-sed:
contrib/git-resurrect.sh: do not write \t for HT in sed scripts
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Just like we did in 0d1d6e50 ("t/t7003: replace \t with literal tab
in sed expression", 2010-08-12), avoid writing "\t" for HT in sed
scripts, which is not portable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Change the tag, branch & for-each-ref commands to have a --no-contains
option in addition to their longstanding --contains options.
This allows for finding the last-good rollout tag given a known-bad
<commit>. Given a hypothetically bad commit cf5c7253e0, the git
version to revert to can be found with this hacky two-liner:
(git tag -l 'v[0-9]*'; git tag -l --contains cf5c7253e0 'v[0-9]*') |
sort | uniq -c | grep -E '^ *1 ' | awk '{print $2}' | tail -n 10
With this new --no-contains option the same can be achieved with:
git tag -l --no-contains cf5c7253e0 'v[0-9]*' | sort | tail -n 10
As the filtering machinery is shared between the tag, branch &
for-each-ref commands, implement this for those commands too. A
practical use for this with "branch" is e.g. finding branches which
were branched off between v2.8.0 and v2.10.0:
git branch --contains v2.8.0 --no-contains v2.10.0
The "describe" command also has a --contains option, but its semantics
are unrelated to what tag/branch/for-each-ref use --contains for. A
--no-contains option for "describe" wouldn't make any sense, other
than being exactly equivalent to not supplying --contains at all,
which would be confusing at best.
Add a --without option to "tag" as an alias for --no-contains, for
consistency with --with and --contains. The --with option is
undocumented, and possibly the only user of it is
Junio (<xmqqefy71iej.fsf@gitster.mtv.corp.google.com>). But it's
trivial to support, so let's do that.
The additions to the the test suite are inverse copies of the
corresponding --contains tests. With this change --no-contains for
tag, branch & for-each-ref is just as well tested as the existing
--contains option.
In addition to those tests, add a test for "tag" which asserts that
--no-contains won't find tree/blob tags, which is slightly
unintuitive, but consistent with how --contains works & is documented.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Command line completion updates.
* sg/completion-ctags:
completion: offer ctags symbol names for 'git log -S', '-G' and '-L:'
completion: extract completing ctags symbol names into helper function
completion: put matching ctags symbol names directly into COMPREPLY
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Just like in the case of search patterns for 'git grep', see 29eec71f2
(completion: match ctags symbol names in grep patterns, 2011-10-21)),
a common thing to look for using 'git log -S', '-G' and '-L:' is the
name of a symbol.
Teach the completion for 'git log' to offer ctags symbol names after
these options, both in stuck and in unstuck forms.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The previous commit doubled the number of __git_match_ctag()'s
positional parameters, and, to keep the position of existing
parameters for the sake of backwards compatibility, the prefix,
current word and suffix parameters ended up in different order than in
other functions accepting the same parameters. Then there is a
condition checking the existence of the tag file before invoking this
function.
We could still live with this if there were only a single callsite,
but the next commit will add a few more, so it's worth providing a
cleaner interface.
Add the wrapper function __git_complete_symbol(), which encompasses
the condition for checking the presence of the tag file and filling
COMPREPLY, and accepts '--opt=val'-style options with default values
that keep callsites simpler.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The one-liner awk script in __git_match_ctag() listing ctags symbol
names for 'git grep <TAB>' is already smart enough to list only symbol
names matching the current word to be completed.
Extend this helper function to accept prefix and suffix parameters to
be prepended and appended, respectively, to each listed symbol name in
the awk script, so its output won't require any additional processing
or filtering in the completion script before being handed over to
Bash. Use the faster __gitcomp_direct() helper instead of
__gitcomp_nl() to fill the fully processed matching symbol names into
Bash's COMPREPLY array.
Right after 'git grep <TAB>' in current git.git with 14k+ symbol names
in the tag file, best of five:
Before:
$ time __gitcomp_nl "$(__git_match_ctag "" tags)"
real 0m0.178s
user 0m0.176s
sys 0m0.000s
After:
$ time __gitcomp_direct "$(__git_match_ctag "" tags "" " ")"
real 0m0.058s
user 0m0.048s
sys 0m0.008s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| |/ / / /
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The refs completion for large number of refs has been sped up,
partly by giving up disambiguating ambiguous refs and partly by
eliminating most of the shell processing between 'git for-each-ref'
and 'ls-remote' and Bash's completion facility.
* sg/completion-refs-speedup:
completion: speed up branch and tag completion
completion: fill COMPREPLY directly when completing fetch refspecs
completion: fill COMPREPLY directly when completing refs
completion: let 'for-each-ref' sort remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' filter remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' strip the remote name from remote branches
completion: let 'for-each-ref' and 'ls-remote' filter matching refs
completion: don't disambiguate short refs
completion: don't disambiguate tags and branches
completion: support excluding full refs
completion: support completing fully qualified non-fast-forward refspecs
completion: support completing full refs after '--option=refs/<TAB>'
completion: wrap __git_refs() for better option parsing
completion: remove redundant __gitcomp_nl() options from _git_commit()
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Modify __git_heads() and __git_tags() and the few callsites they have,
so we can let 'git for-each-ref' do all the hard work and these
functions' output won't need any further processing or filtering
before being handed over to Bash, resulting in faster branch and tag
completion. These are some of the same tricks used in the previous
commits to speed up refs completion, namely:
- Extend both functions to accept prefix, current word and suffix
positional parameters, all optional and all empty by default to
keep the parameterless behavior unaltered.
- Specify appropriate globbing patterns to 'git for-each-ref' to
list only branches or tags matching the given current word
parameter.
- Modify the 'git for-each-ref --format=<...>' to include the given
prefix and suffix.
- Adjust all callsites to specify the proper prefix, current word
and suffix parameters, and to fill COMPREPLY using
__gitcomp_direct().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The __git_complete_fetch_refspecs() has to iterate over __git_refs()'s
output anyway to turn the listed matching refs into refspecs, and it
knows about the prefix and suffix that has to be added to each
refspec.
Modify this function to add the prefix and suffix to each refspec
while iterating and feed the result, since it doesn't need further
processing, to the new __gitcomp_direct() helper added in the previous
commit, because it should be faster when there are a lot of refspecs
to list.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
__gitcomp_nl() iterates over all the possible completion words it gets
as argument
- filtering matching words,
- appending a trailing space to each matching word (in all but two
cases),
- prepending a prefix to each matching word (when completing words
after e.g. '--option=<TAB>' or 'master..<TAB>'), and
- adding each matching word to the COMPREPLY array.
This takes a while when a lot of refs are passed to __gitcomp_nl().
The previous changes in this series ensure that __git_refs() lists
only refs matching the current word to be completed, making a second
filtering in __gitcomp_nl() redundant.
Adding the necessary prefix and suffix could be done in __git_refs()
as well:
- When refs come from 'git for-each-ref', then that prefix and
suffix could be added much more efficiently using a 'git
for-each-ref' format containing said prefix and suffix. Care
should be taken, though, because that prefix might contain
'for-each-ref' format specifiers as part of the left hand side of
a '..' range or '...' symmetric difference notation or
fetch/push/etc. refspec, e.g. 'git log "evil-%(refname)..br<TAB>'.
Doubling every '%' in the prefix will prevent 'git for-each-ref'
from interpolating any of those contained specifiers.
- When refs come from 'git ls-remote', then that prefix and suffix
can be added in the shell loop that has to process 'git
ls-remote's output anyway.
- Finally, the prefix and suffix can be added to that handful of
potentially matching symbolic and pseudo refs right away in the
shell loop listing them.
And then all what is still left to do is to assign a bunch of
newline-separated words to a shell array, which can be done without a
shell loop iterating over each word, basically making all of
__gitcomp_nl() unnecessary for refs completion.
Add the helper function __gitcomp_direct() to fill the COMPREPLY array
with prefiltered and preprocessed words without any additional
processing, without a shell loop, with just one single compound
assignment. Modify __git_refs() to accept prefix and suffix
parameters and add them to each and every listed ref as described
above. Modify __git_complete_refs() to pass the prefix and suffix
parameters to __git_refs() and to feed __git_refs()'s output to
__gitcomp_direct() instead of __gitcomp_nl().
This speeds up refs completion when there are a lot of refs matching
the current word to be completed. Listing all branches for completion
in a repo with 100k local branches, all packed, best of five:
On Linux, near the beginning of this series, for reference:
$ time __git_complete_refs
real 0m2.028s
user 0m1.692s
sys 0m0.344s
Before this patch:
real 0m1.135s
user 0m1.112s
sys 0m0.024s
After:
real 0m0.367s
user 0m0.352s
sys 0m0.020s
On Windows, near the beginning:
real 0m13.078s
user 0m1.609s
sys 0m0.060s
Before this patch:
real 0m2.093s
user 0m1.641s
sys 0m0.060s
After:
real 0m0.683s
user 0m0.203s
sys 0m0.076s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
When listing unique remote branches for 'git checkout's tracking
DWIMery, __git_refs() runs the classic '... |sort |uniq -u' pattern to
filter out duplicate remote branches.
Let 'git for-each-ref' do the sorting, sparing the overhead of
fork()+exec()ing 'sort' and a stage in the pipeline where potentially
relatively large amount of data can be passed between two subsequent
pipeline stages.
This speeds up refs completion for 'git checkout' a bit when a lot of
remote branches match the current word to be completed. Listing a
single local and 100k remote branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --track
real 0m1.856s
user 0m1.816s
sys 0m0.060s
After:
real 0m1.550s
user 0m1.512s
sys 0m0.060s
On Windows, before:
real 0m3.128s
user 0m2.155s
sys 0m0.183s
After:
real 0m2.781s
user 0m1.826s
sys 0m0.136s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The code listing unique remote branches for 'git checkout's tracking
DWIMery outputs only remote branches that match the current word to be
completed, but the filtering is done in a shell loop iterating over
all remote refs.
Let 'git for-each-ref' do the filtering, as it can do so much more
efficiently and we can remove that shell loop entirely.
This speeds up refs completion for 'git checkout' considerably when
there are a lot of non-matching remote refs to be filtered out.
Uniquely completing a branch in a repository with 100k remote
branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --cur=maste --track
real 0m1.993s
user 0m1.740s
sys 0m0.304s
After:
real 0m0.266s
user 0m0.248s
sys 0m0.012s
On Windows, before:
real 0m6.187s
user 0m3.358s
sys 0m2.121s
After:
real 0m0.750s
user 0m0.015s
sys 0m0.090s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The code listing unique remote branches for 'git checkout's tracking
DWIMery uses a shell parameter expansion in a loop iterating over each
listed ref to remove the remote's name from the remote branches, i.e.
the leading path component from the short ref. When listing refs from
a configured remote repository, '| sed s///' is used for the same
purpose.
Let 'git for-each-ref' strip one more leading path component from the
refs, i.e. use the format 'refname:strip=3' instead of '=2', making
that parameter expansion and 'sed' execution unnecessary.
This speeds up refs completion for 'git checkout'. Uniquely
completing a branch for 'git checkout maste<TAB>' in a repo with 100k
remote branches, all packed, best of five:
On Linux, near the beginning of this series, for reference:
$ time __git_complete_refs --cur=maste --track
real 0m8.185s
user 0m6.896s
sys 0m1.616s
Before this patch:
real 0m2.714s
user 0m2.344s
sys 0m0.436s
After:
real 0m1.993s
user 0m1.740s
sys 0m0.304s
On Windows, near the beginning:
real 1m8.421s
user 0m7.591s
sys 0m3.557s
Before this patch:
real 0m8.191s
user 0m4.638s
sys 0m2.918s
After:
real 0m6.187s
user 0m3.358s
sys 0m2.121s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
When completing refs, several __git_refs() code paths list all the
refs from the refs/{heads,tags,remotes}/ hierarchy and then
__gitcomp_nl() iterates over those refs in a shell loop to filter out
refs not matching the current ref to be completed. This comes with a
considerable performance penalty when a repository contains a lot of
refs but the current ref can be uniquely completed or when only a
handful of refs match the current ref.
Reduce the number of iterations in __gitcomp_nl() from the number of
refs to the number of matching refs by specifying appropriate globbing
patterns to 'git for-each-ref' and 'git ls-remote' to list only those
refs that match the current ref to be completed. However, do so only
when the ref to match is explicitly given as parameter, because the
current word on the command line might contain a prefix like
'--option=' or 'branch..'. The __git_complete_refs() and
__git_complete_fetch_refspecs() helpers introduced previously in this
patch series already call __git_refs() specifying this current ref
parameter, so all their callsites, i.e. all places in the completion
script doing refs completion, can benefit from this optimization.
Furthermore, list only those symbolic and pseudo refs that match the
current ref to be completed. Though it doesn't matter at all in
itself performance-wise, it will allow us further significant
optimizations later in this series.
This speeds up refs completion considerably when there are a lot of
non-matching refs to be filtered out. Uniquely completing a branch in
a repository with 100k local branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --cur=maste
real 0m0.831s
user 0m0.808s
sys 0m0.028s
After:
real 0m0.119s
user 0m0.104s
sys 0m0.008s
On Windows, before:
real 0m1.480s
user 0m1.031s
sys 0m0.060s
After:
real 0m0.377s
user 0m0.015s
sys 0m0.030s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
When the completion script lists short refs it does so using the 'git
for-each-ref' format 'refname:short', which makes sure that all listed
refs are unambiguous. While disambiguating refs is technically
correct in this case, as opposed to the cases discussed in the
previous patch, this disambiguation involves several stat() syscalls
for each ref, thus, unfortunately, comes at a steep cost especially on
Windows and/or when there are a lot of refs to be listed. A user of
Git for Windows reported[1] 'git checkout <TAB>' taking ~11 seconds in
a repository with just about 4000 refs.
However, it's questionable whether ambiguous refs are really that bad
to justify that much extra cost:
- Ambiguous refs are not that common,
- even if a repository contains ambiguous refs, they only hurt when
the user actually happens to want to do something with one of the
ambiguous refs, and
- the issue can be easily circumvented by renaming those ambiguous
refs.
- On the other hand, apparently not that many refs are needed to
make refs completion unacceptably slow on Windows,
- and this slowness bites each and every time the user attempts refs
completion, even when the repository doesn't contain any ambiguous
refs.
- Furthermore, circumventing the issue might not be possible or
might be considerably more difficult and requires various
trade-offs (e.g. working in a repository with only a few selected
important refs while keeping a separate repository with all refs
for reference).
Arguably, in this case the benefits of technical correctness are
rather minor compared to the price we pay for it, and we are better
off opting for performance over correctness.
Use the 'git for-each-ref' format 'refname:strip=2' to list short refs
to spare the substantial cost of disambiguating.
This speeds up refs completion considerably. Uniquely completing a
branch in a repository with 100k local branches, all packed, best of
five:
On Linux, before:
$ time __git_complete_refs --cur=maste
real 0m1.662s
user 0m1.368s
sys 0m0.296s
After:
real 0m0.831s
user 0m0.808s
sys 0m0.028s
On Windows, before:
real 0m12.457s
user 0m1.016s
sys 0m0.092s
After:
real 0m1.480s
user 0m1.031s
sys 0m0.060s
[1] - https://github.com/git-for-windows/git/issues/524
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
When the completion script has to list only tags or only branches, it
uses the 'git for-each-ref' format 'refname:short', which makes sure
that all listed tags and branches are unambiguous. However,
disambiguating tags and branches in these cases is wrong, because:
- __git_tags(), the helper function listing possible tagname
arguments for 'git tag', lists an ambiguous tag
'refs/tags/ambiguous' as 'tags/ambiguous'. Its only consumer,
'git tag' expects its tagname argument to be under 'refs/tags/',
thus it interprets that abgiguous tag as
'refs/tags/tags/ambiguous'. Clearly wrong.
- __git_heads() lists possible branchname arguments for 'git branch'
and possible 'branch.<branchname>' configuration subsections.
Both of these expect branchnames to be under 'refs/heads/' and
misinterpret a disambiguated branchname like 'heads/ambiguous'.
Furthermore, disambiguation involves several stat() syscalls for each
tag or branch, thus comes at a steep cost especially on Windows and/or
when there are a lot of tags or branches to be listed.
Use the 'git for-each-ref' format 'refname:strip=2' instead of
'refname:short' to avoid harmful disambiguation of tags and branches
in __git_tags() and __git_heads().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Commit 49416ad22 (completion: support excluding refs, 2016-08-24) made
possible to complete short refs with a '^' prefix.
Extend the support to full refs to make completing '^refs/...' work.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
After 'git fetch <remote> <TAB>' our completion script offers refspecs
that will fetch to a local branch with the same name as in the remote
repository, e.g. 'master:master'. This also completes
non-fast-forward refspecs, i.e. after a '+' prefix like
'+master:master', and fully qualified refspecs, e.g.
'refs/heads/master:refs/heads/master'. However, it does not complete
non-fast-forward fully qualified refspecs (or fully qualified refspecs
following any other prefix, e.g. '--option=', though currently no git
command supports such an option, but third party git commands might).
These refspecs are listed by the __git_refs2() function, which is just
a thin wrapper iterating over __git_refs()'s output, turning each
listed ref into a refspec. Now, it's certainly possible to modify
__git_refs2() and its callsite to pass an extra parameter containing
only the ref part of the current word to be completed (to follow suit
of the previous commit) to deal with prefixed fully qualified refspecs
as well. Unfortunately, keeping the current behavior unchanged in the
"no extra parameter" case brings in a bit of subtlety, which makes the
resulting code ugly and compelled me to write a 8-line long comment in
the proof of concept. Not good. However, since the callsite has to
be modified for proper functioning anyway, we might as well leave
__git_refs2() as is and introduce a new helper function without
backwards compatibility concerns.
Add the new function __git_complete_fetch_refspecs() that has all the
necessary parameters to do the right thing in all cases mentioned
above, including non-fast-forward fully qualified refspecs. This new
function can also easier benefit from optimizations coming later in
this patch series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Completing full refs currently only works when the full ref stands on
in its own on the command line, but doesn't work when the current word
to be completed contains a prefix before the full ref, e.g.
'--option=refs/<TAB>' or 'master..refs/bis<TAB>'.
The reason is that __git_refs() looks at the current word to be
completed ($cur) as a whole to decide whether it has to list full (if
it starts with 'refs/') or short refs (otherwise). However, $cur also
holds said '--option=' or 'master..' prefixes, which of course throw
off this decision. Luckily, the default action is to list short refs,
that's why completing short refs happens to work even after a
'master..<TAB>' prefix and similar cases.
Pass only the ref part of the current word to be completed to
__git_refs() as a new positional parameter, so it can make the right
decision even if the whole current word contains some kind of a
prefix.
Make this new parameter the 4. positional parameter and leave the 3.
as an ignored placeholder for now (it will be used later in this patch
series).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
__git_refs() currently accepts two optional positional parameters: a
remote and a flag for 'git checkout's tracking DWIMery. To fix a
minor bug, and, more importantly, for faster refs completion, this
series will add three more parameters: a prefix, the current word to
be completed and a suffix, i.e. the options accepted by __gitcomp() &
friends, and will change __git_refs() to list only refs matching that
given current word and to add that given prefix and suffix to the
listed refs.
However, __git_refs() is the helper function that is most likely used
in users' custom completion scriptlets for their own git commands, and
we don't want to break those, so
- we can't change __git_refs()'s default output format, i.e. we
can't by default append a trailing space to every listed ref,
meaning that the suffix parameter containing the default trailing
space would have to be specified on every invocation, and
- we can't change the position of existing positional parameters
either, so there would have to be plenty of set-but-empty
placeholder positional parameters all over the completion script.
Furthermore, with five positional parameters it would be really hard
to remember which position means what.
To keep callsites simple, add the new wrapper function
__git_complete_refs() around __git_refs(), which:
- instead of positional parameters accepts real '--opt=val'-style
options and with minimalistic option parsing translates them to
__git_refs()'s and __gitcomp_nl()'s positional parameters, and
- includes the '__gitcomp_nl "$(__git_refs ...)" ...' command
substitution to make its behavior match its name and the behavior
of other __git_complete_* functions, and to limit future changes
in this series to __git_refs() and this new wrapper function.
Call this wrapper function instead of __git_refs() wherever possible
throughout the completion script, i.e. when __git_refs()'s output is
fed to __gitcomp_nl() right away without further processing, which
means all callsites except a single one in the __git_refs2() helper.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Those two options are specifying the default values that
__gitcomp_nl() would use anyway when invoked with no options at all.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The command line prompt (in contrib/) learned a new 'tag' style
that can be specified with GIT_PS1_DESCRIBE_STYLE, to describe a
detached HEAD with "git describe --tags".
* mg/prompt-describe-tags:
git-prompt: add a describe style for any tags
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
git-prompt has various describe styles, among them "describe" (by
annotated tags) and "default" (by exact match with any tag).
Add a mode "tag" that describes by any tag, annotated or not.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
There is no need for Python only to give a few messages to the
standard error stream, but we somehow did.
* ss/remote-bzr-hg-placeholder-wo-python:
contrib: git-remote-{bzr,hg} placeholders don't need Python
|
| | |/ / / / /
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
It does not make sense for these placeholder scripts to depend on Python
just because the real scripts do. At the example of Git for Windows, we
would not even be able to see those warnings as it does not ship with
Python. So just use plain shell scripts instead.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| |_|_|/ / /
|/| | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Add a function for appending the canonized absolute pathname of a given
path to a strbuf. It keeps the existing contents intact, as expected of
a function of the strbuf_add() family, while avoiding copying the result
if the given strbuf is empty. It's more consistent with the rest of the
strbuf API than strbuf_realpath(), which it's wrapping.
Also add a semantic patch demonstrating its intended usage and apply it
to the current tree. Using strbuf_add_real_path() instead of calling
strbuf_addstr() and real_path() avoids an extra copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | |_|_|/
| |/| | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add a semantic patch for using ALLOC_ARRAY to allocate arrays and apply
the transformation on the current source tree. The macro checks for
multiplication overflow and infers the element size automatically; the
result is shorter and safer code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| | |_|/ /
| |/| | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Clean-up and updates to command line completion (in contrib/).
* sg/completion: (22 commits)
completion: restore removed line continuating backslash
completion: cache the path to the repository
completion: extract repository discovery from __gitdir()
completion: don't guard git executions with __gitdir()
completion: consolidate silencing errors from git commands
completion: don't use __gitdir() for git commands
completion: respect 'git -C <path>'
rev-parse: add '--absolute-git-dir' option
completion: fix completion after 'git -C <path>'
completion: don't offer commands when 'git --opt' needs an argument
completion: list short refs from a remote given as a URL
completion: don't list 'HEAD' when trying refs completion outside of a repo
completion: list refs from remote when remote's name matches a directory
completion: respect 'git --git-dir=<path>' when listing remote refs
completion: fix most spots not respecting 'git --git-dir=<path>'
completion: ensure that the repository path given on the command line exists
completion tests: add tests for the __git_refs() helper function
completion tests: check __gitdir()'s output in the error cases
completion tests: consolidate getting path of current working directory
completion tests: make the $cur variable local to the test helper functions
...
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Recent commit 1cd23e9e0 (completion: don't use __gitdir() for git
commands, 2017-02-03) rewrapped a couple of long lines, and while
doing so it inadvertently removed a '\' from the end of a line, thus
breaking completion for 'git config remote.name.push <TAB>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
After the previous changes in this series there are only a handful of
$(__gitdir) command substitutions left in the completion script, but
there is still a bit of room for improvements:
1. The command substitution involves the forking of a subshell,
which has considerable overhead on some platforms.
2. There are a few cases, where this command substitution is
executed more than once during a single completion, which means
multiple subshells and possibly multiple 'git rev-parse'
executions. __gitdir() is invoked twice while completing refs
for e.g. 'git log', 'git rebase', 'gitk', or while completing
remote refs for 'git fetch' or 'git push'.
Both of these points can be addressed by using the
__git_find_repo_path() helper function introduced in the previous
commit:
1. __git_find_repo_path() stores the path to the repository in a
variable instead of printing it, so the command substitution
around the function can be avoided. Or rather: the command
substitution should be avoided to make the new value of the
variable set inside the function visible to the callers.
(Yes, there is now a command substitution inside
__git_find_repo_path() around each 'git rev-parse', but that's
executed only if necessary, and only once per completion, see
point 2. below.)
2. $__git_repo_path, the variable holding the path to the
repository, is declared local in the toplevel completion
functions __git_main() and __gitk_main(). Thus, once set, the
path is visible in all completion functions, including all
subsequent calls to __git_find_repo_path(), meaning that they
wouldn't have to re-discover the path to the repository.
So call __git_find_repo_path() and use $__git_repo_path instead of the
$(__gitdir) command substitution to access paths in the .git
directory. Turn tests checking __gitdir()'s repository discovery into
tests of __git_find_repo_path() such that only the tested function
changes but the expected results don't, ensuring that repo discovery
keeps working as it did before.
As __gitdir() is not used anymore in the completion script, mark it as
deprecated and direct users' attention to __git_find_repo_path() and
$__git_repo_path. Yet keep four __gitdir() tests to ensure that it
handles success and failure of __git_find_repo_path() and that it
still handles its optional remote argument, because users' custom
completion scriptlets might depend on it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
To prepare for caching the path to the repository in the following
commit, extract the repository discovering part of __gitdir() into the
__git_find_repo_path() helper function, which stores the found path in
the $__git_repo_path variable instead of printing it. Make __gitdir()
a wrapper around this new function. Declare $__git_repo_path local in
the toplevel completion functions __git_main() and __gitk_main() to
ensure that it never leaks into the environment and influences
subsequent completions (though this isn't necessary right now, as
__gitdir() is still only executed in subshells, but will matter for
the following commit).
Adjust tests checking __gitdir() or any other completion function
calling __gitdir() to perform those checks in a subshell to prevent
$__git_repo_path from leaking into the test environment. Otherwise
leave the tests unchanged to demonstrate that this change doesn't
alter __gitdir()'s behavior.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Three completion functions, namely __git_index_files(), __git_heads()
and __git_tags(), first run __gitdir() and check that the path it
outputs exists, i.e. that there is a git repository, and run a git
command only if there is one.
After the previous changes in this series there are no further uses of
__gitdir()'s output in these functions besides those checks. And
those checks are unnecessary, because we can just execute those git
commands outside of a repository and let them error out. We don't
perform such a check in other places either.
Remove this check and the __gitdir() call from these functions,
sparing the fork()+exec() overhead of the command substitution and the
potential 'git rev-parse' execution.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Outputting error messages during completion is bad: they disrupt the
command line, can't be deleted, and the user is forced to Ctrl-C and
start over most of the time. We already silence stderr of many git
commands in our Bash completion script, but there are still some in
there that can spew error messages when something goes wrong.
We could add the missing stderr redirections to all the remaining
places, but instead let's leverage that git commands are now executed
through the previously introduced __git() wrapper function, and
redirect standard error to /dev/null only in that function. This way
we need only one redirection to take care of errors from almost all
git commands. Redirecting standard error of the __git() wrapper
function thus became redundant, remove them.
The exceptions, i.e. the repo-independent git executions and those in
the __gitdir() function that don't go through __git() already have
their standard error silenced.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Several completion functions contain the following pattern to run git
commands respecting the path to the repository specified on the
command line:
git --git-dir="$(__gitdir)" <cmd> <options>
This imposes the overhead of fork()ing a subshell for the command
substitution and potentially fork()+exec()ing 'git rev-parse' inside
__gitdir().
Now, if neither '--gitdir=<path>' nor '-C <path>' options are
specified on the command line, then those git commands are perfectly
capable to discover the repository on their own. If either one or
both of those options are specified on the command line, then, again,
the git commands could discover the repository, if we pass them all of
those options from the command line.
This means we don't have to run __gitdir() at all for git commands and
can spare its fork()+exec() overhead.
Use Bash parameter expansions to check the $__git_dir variable and
$__git_C_args array and to assemble the appropriate '--git-dir=<path>'
and '-C <path>' options if either one or both are present on the
command line. These parameter expansions are, however, rather long,
so instead of changing all git executions and make already long lines
even longer, encapsulate running git with '--git-dir=<path> -C <path>'
options into the new __git() wrapper function. Furthermore, this
wrapper function will also enable us to silence error messages from
git commands uniformly in one place in a later commit.
There's one tricky case, though: in __git_refs() local refs are listed
with 'git for-each-ref', where "local" is not necessarily the
repository we are currently in, but it might mean a remote repository
in the filesystem (e.g. listing refs for 'git fetch /some/other/repo
<TAB>'). Use one-shot variable assignment to override $__git_dir with
the path of the repository where the refs should come from. Although
one-shot variable assignments in front of shell functions are to be
avoided in our scripts in general, in the Bash completion script we
can do that safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
'git -C <path>' option(s) on the command line should be taken into
account during completion, because
- like '--git-dir=<path>', it can lead us to a different repository,
- a few git commands executed in the completion script do care about
in which directory they are executed, and
- the command for which we are providing completion might care about
in which directory it will be executed.
However, unlike '--git-dir=<path>', the '-C <path>' option can be
specified multiple times and their effect is cumulative, so we can't
just store a single '<path>' in a variable. Nor can we simply
concatenate a path from '-C <path1> -C <path2> ...', because e.g. (in
an arguably pathological corner case) a relative path might be
followed by an absolute path.
Instead, store all '-C <path>' options word by word in the
$__git_C_args array in the main git completion function, and pass this
array, if present, to 'git rev-parse --absolute-git-dir' when
discovering the repository in __gitdir(), and let it take care of
multiple options, relative paths, absolute paths and everything.
Also pass all '-C <path> options via the $__git_C_args array to those
git executions which require a worktree and for which it matters from
which directory they are executed from. There are only three such
cases:
- 'git diff-index' and 'git ls-files' in __git_ls_files_helper()
used for git-aware filename completion, and
- the 'git ls-tree' used for completing the 'ref:path' notation.
The other git commands executed in the completion script don't need
these '-C <path>' options, because __gitdir() already took those
options into account. It would not hurt them, either, but let's not
induce unnecessary code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
