summaryrefslogtreecommitdiff
path: root/Documentation/git-ls-remote.txt
Commit message (Collapse)AuthorAgeFilesLines
* ls-remote doc: don't encourage use of branches-fileRamkumar Ramachandra2013-06-231-2/+2
| | | | | | | | One outdated example encourages the use of $GIT_DIR/branches files. Replace it with an equivalent example using a remote. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ls-remote doc: rewrite <repository> paragraphRamkumar Ramachandra2013-06-231-3/+3
| | | | | | | | | Replace the <repository> paragraph containing specific references to $GIT_DIR/branches and "." with a generic urls-or-remotes paragraph referencing the relevant sections in the git-fetch(1) manpage. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ls-remote doc: fix example invocation on git.gitRamkumar Ramachandra2013-06-231-1/+0
| | | | | | | | | | | Under the EXAMPLES section, there is one invocation on the git.git repository that attempts to list the refs master, pu, and rc. The ref rc does not exist in today's repository, so remove it. Among other things, this example demonstrates that the "<refs>..." argument is simply a filter; requesting a non-existent ref is not an error. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ls-remote: document the '--get-url' optionStefan Naewe2012-09-071-0/+5
| | | | | | | | | | | | While looking for a way to expand the URL of a remote that uses a 'url.<name>.insteadOf' config option I stumbled over the undocumented '--get-url' option of 'git ls-remote'. This adds some minimum documentation for that option. And while at it, also add that option to the '-h' output. Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ls-remote: the --exit-code option reports "no matching refs"Michael Schubert2011-05-181-1/+7
| | | | | | | | | | | | | | | The "git ls-remote" uses its exit status to indicate if it successfully talked with the remote repository. A new option "--exit-code" makes the command exit with status "2" when there is no refs to be listed, even when the command successfully talked with the remote repository. This way, the caller can tell if we failed to contact the remote, or the remote did not have what we wanted to see. Of course, you can inspect the output from the command, which has been and will continue to be a valid way to check the same thing. Signed-off-by: Michael Schubert <mschub@elegosoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* doc: drop author/documentation sections from most pagesJeff King2011-03-111-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.
* ls-remote documentation: <refs> argument is optionalPiotr Krukowiecki2011-03-091-1/+1
| | | | | | | Correct SYNOPSIS section. Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Update my e-mail addressJunio C Hamano2008-07-211-1/+1
| | | | | | The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* manpages: italicize git command names (which were in teletype font)Jonathan Nieder2008-07-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Documentation formatting and cleanupJonathan Nieder2008-07-011-1/+1
| | | | | | | | | | | | Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Documentation: be consistent about "git-" versus "git "Jonathan Nieder2008-07-011-1/+1
| | | | | | | | | | | | | | | | | | | | Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Docs: Use "-l::\n--long\n" format in OPTIONS sectionsStephan Beyer2008-06-081-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* documentation: move git(7) to git(1)Christian Couder2008-06-061-1/+1
| | | | | | | | As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Documentation: rename gitlink macro to linkgitDan McGee2008-01-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Clean up documentation that references deprecated 'git peek-remote'.Johannes Sixt2007-12-171-1/+1
| | | | | | | | | | | Now that 'git peek-remote' is deprecated and only an alias for 'git ls-remote', it should not be referenced from other manual pages. This also removes the description of the --exec option, which is no longer present. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* War on whitespaceJunio C Hamano2007-06-071-1/+0
| | | | | | | | | This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Documentation: a few spelling fixesRené Scharfe2007-01-171-1/+1
| | | | | Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
* git-ls-remote(1): document --upload-packJonas Fonseca2006-08-251-4/+14
| | | | | | | ... and mention that '.' will list the local repo references. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
* Remove trailing dot after short descriptionFredrik Kuivinen2006-03-091-1/+1
| | | | | Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
* Documentation/git-ls-remote.txt: Add -h and -t.Nikolai Weibull2005-12-081-1/+1
| | | | | | | -h and -t are aliases for --heads and --tags to git-ls-remote. Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
* Remove the version tags from the manpagesJunio C Hamano2005-10-101-1/+0
| | | | | Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
* [PATCH] Documentation: Update all files to use the new gitlink: macroSergey Vlasov2005-09-201-1/+1
| | | | | | | | | | | | The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
* Big tool rename.Junio C Hamano2005-09-071-0/+64
As promised, this is the "big tool rename" patch. The primary differences since 0.99.6 are: (1) git-*-script are no more. The commands installed do not have any such suffix so users do not have to remember if something is implemented as a shell script or not. (2) Many command names with 'cache' in them are renamed with 'index' if that is what they mean. There are backward compatibility symblic links so that you and Porcelains can keep using the old names, but the backward compatibility support is expected to be removed in the near future. Signed-off-by: Junio C Hamano <junkio@cox.net>
View Lorry Controller Status