| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix it so gitweb doesn't write "Use of unitialized value..." warnings
(which gets written in web server logs) for empty (no commits)
repository.
In empty repository "last change" (last activity) doesn't make sense;
also there is no sense in parsing commits which aren't there.
In projects list for empty repositories gitweb now writes "No commits"
using "noage" class, instead of leaving cell empty, in the last change
column.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* maint:
git-svn: don't attempt to minimize URLs by default
git-svn: fix segfaults due to initial SVN pool being cleared
git-svn: clean up caching of SVN::Ra functions
git-svn: don't drop the username from URLs when dcommit is run
RPM spec: include files in technical/ to package.
Remove stale non-static-inline prototype for tree_entry_extract()
git-config: test for 'do not forget "a.b.var" ends "a.var" section'.
git-config: do not forget seeing "a.b.var" means we are out of "a.var" section.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For tracking branches and tags, git-svn prefers to connect
to the root of the repository or at least the level that
houses branches and tags as well as trunk. However, users
that are accustomed to tracking a single directory have
no use for this feature.
As pointed out by Junio, users may not have permissions to
connect to connect to a higher-level path in the repository.
While the current minimize_url() function detects lack of
permissions to certain paths _after_ successful logins, it
cannot effectively determine if it is trying to access a
login-only portion of a repo when the user expects to
connect to a part where anonymous access is allowed.
For people used to the git-svnimport switches of
--trunk, --tags, --branches, they'll already pass the
repository root (or root+subdirectory), so minimize URL
isn't of too much use to them, either.
For people *not* used to git-svnimport, git-svn also
supports:
git svn init --minimize-url \
--trunk http://repository-root/foo/trunk \
--branches http://repository-root/foo/branches \
--tags http://repository-root/foo/tags
And this is where the new --minimize-url command-line switch
comes in to allow for this behavior to continue working.
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Some parts of SVN always seem to use it, even if the SVN::Ra
object we're using is no longer used and we've created a new one
in its place. It's also true that only one SVN::Ra connection
can exist at once... Using SVN::Pool->new_default when the
SVN::Ra object is created doesn't seem to help very much,
either...
Hopefully this fixes all segfault problems users have been
experiencing over the past few months.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch was originally intended to make the Perl GC more
sensitive to the SVN::Pool objects and not accidentally clean
them up when they shouldn't be (causing segfaults). That didn't
work, but this patch makes the code a bit cleaner regardless
Put our caches for get_dir and check_path calls directly into
the SVN::Ra object so they auto-expire when it is destroyed.
dirents returned by get_dir() no longer needs the pool object
stored persistently along with the cache data, as they'll be
converted to native Perl hash references.
Since calling rev_proplist repeatedly per-revision is no longer
needed in git-svn, we do not cache calls to it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
| | |
| |
| |
| |
| |
| | |
We no longer store usernames in URLs stored in git-svn-id lines
for dcommit, so we shouldn't rely on those URLs when connecting
to the remote repository to commit.
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Not only that they are interesting to users, some of the
files are linked to by the included "Git User's Manual"
Signed-off-by: Quy Tonthat <qtonthat@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When 4651ece8 made the function a "static inline", it should
have removd the stale prototype but everybody missed that.
Thomas Glanzmann noticed this broke compilation with Forte12
compiler on his Sun boxes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| | |
Added test for mentioned bugfix.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Earlier code tried to be half-careful and knew the logic that
seeing "a.var" after seeing "a.b.var" is a sign of the previous
"a.b." section has ended, but forgot it has to handle the other
way. Seeing "a.b.var" after seeing "a.var" is a sign that "a."
section has ended, so a new "a.var2" variable should be added
before the location "a.b.var" appears.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Change the configuration parser so that it ignores
everything except for ^gitcvs.((ext|pserver).)?
This greatly reduces the risk of failing while
parsing some unknown and irrelevant config option.
The bug that triggered this change was that the
parsing doesn't handle sections that have a
subsection and a variable with the same name.
While this bug still remains, all remaining
causes can be attributed to user error, since
there are no defined variables gitcvs.ext and
gitcvs.pserver.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Try to avoid "Use of uninitialized value ..." errors caused by bad
revision, incorrect filename, wrong object id, bad file etc. (wrong
value of 'h', 'hb', 'f', etc. parameters). This avoids polluting web
server errors log.
Correct git_get_hash_by_path and parse_commit_text (and, in turn,
parse_commit) to return undef if object does not exist. Check in
git_tag if requested tag exists.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Currently
$ git grep '\([^t]\|^\)'link: user-manual.txt
gives four hits that refer to .txt version of the documentation
set, but at least "hooks" and "cvs-migration" have HTML variants
installed, so refer to them instead.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Small additional changes to the cbb84e5d174cf33fd4dcf3136de50a886ff9a2e2
commit, which introduced documentation to pre-receive and post-receive:
- Mention that stdout and stderr are equivalent.
- Add one cross-section link and fix one other.
- Fix information on advantages of post-receive over post-update.
Signed-off-by: Jan Hudec <bulb@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| |\ \
| |/
| |
| |
| |
| |
| |
| |
| | |
* maint:
checkout: allow detaching to HEAD even when switching to the tip of a branch
Updated documentation of hooks in git-receive-pack.
Allow fetching references from any namespace
tiny fix in documentation of git-clone
Fix an unmatched comment end in arm/sha1_arm.S
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
You cannot currently checkout the tip of an existing branch
without moving to the branch.
This allows you to detach your HEAD and place it at such a
commit, with:
$ git checkout master^0
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Added documentation of pre-receive and post-receive hooks and updated
documentation of update and post-update hooks.
[jc: with minor copy-editing]
Signed-off-by: Jan Hudec <bulb@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
not only from the three defined: heads, tags and remotes.
Noticed when I tried to fetch the references created by git-p4-import.bat:
they are placed into separate namespace (refs/p4import/, to avoid showing
them in git-branch output). As canon_refs_list_for_fetch always prepended
refs/heads/ it was impossible, and annoying: it worked before. Normally,
the p4import references are useless anywhere but in the directory managed
by perforce, but in this special case the cloned directory was supposed
to be a backup, including the p4import branch: it keeps information about
where the imported perforce state came from.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| | |
path in example was missing '../'
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| | |
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git-cvsserver has a bug in its configuration file output parser
that makes it choke if the configuration has these:
[diff]
color = auto
[diff.color]
whitespace = blue reverse
This needs to be fixed, but thanks to that bug, a separate bug
in t9400 test script was discovered. The test discarded
GIT_CONFIG instead of pointing at the proper one to be used in
the exoprted repository. This allowed user's .gitconfig and (if
exists) systemwide /etc/gitconfig to affect the outcome of the
test, which is a big no-no.
The patch fixes the problem in the test. Fixing the
git-cvsserver's configuration parser is left as an exercise to
motivated volunteers ;-)
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Both archive-tar and archive-zip needed to be taught about subprojects.
The tar function died when trying to read the subproject commit object,
while the zip function reported "unsupported file mode".
This fixes both by representing the subproject as an empty directory.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Get rid of "Use of uninitialized value in string eq at
gitweb/gitweb.perl line 2320" warning caused by the fact that "empty"
patches, consisting only of extended git diff header and with patch
body empty, such as patch for pure rename, does not have "index" line
in extended diff header. For such patches $from_id and $to_id, filled
from parsing extended diff header, are undefined. But such patches
cannot be continuation patches.
Test if $from_id and $to_id are defined before comparing them with
$diffinfo.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| | |
Rather than updating all working tree paths, we limit
ourselves to paths listed on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When switching from a branch with both x86_64/boot/Makefile and
i386/boot/Makefile to another branch that has x86_64/boot as a
symlink pointing at ../i386/boot, the code incorrectly removed
i386/boot/Makefile.
This was because we first removed everything under x86_64/boot
to make room to create a symbolic link x86_64/boot, then removed
x86_64/boot/Makefile which no longer exists but now is pointing
at i386/boot/Makefile, thanks to the symlink we just created.
This fixes it by using the has_symlink_leading_path() function
introduced previously for git-apply in the checkout codepath.
Earlier, "git checkout" was broken in t4122 test due to this
bug, and the test had an extra "git reset --hard" as a
workaround, which is removed because it is not needed anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
HPA noticed that git-rebase fails when changes involve symlinks
in the middle of the hierarchy. Consider:
* The tree state before the patch is applied has arch/x86_64/boot
as a symlink pointing at ../i386/boot/
* The patch tries to remove arch/x86_64/boot symlink, and
create bunch of files there: .gitignore, Makefile, etc.
git-apply tries to be careful while applying patches; it never
touches the working tree until it is convinced that the patch
would apply cleanly. One of the check it does is that when it
knows a path is going to be created by the patch, it runs
lstat() on the path to make sure it does not exist.
This leads to a false alarm. Because we do not touch the
working tree before all the check passes, when we try to make
sure that arch/x86_64/boot/.gitignore does not exist yet, we
haven't removed the arch/x86_64/boot symlink. The lstat() check
ends up seeing arch/i386/boot/.gitignore through the
yet-to-be-removed symlink, and says "Hey, you already have a
file there, but what you fed me is a patch to create a new
file. I am not going to clobber what you have in the working
tree."
We have similar checks to see a file we are going to modify does
exist and match the preimage of the diff, which is done by
directly opening and reading the file.
For a file we are going to delete, we make sure that it does
exist and matches what is going to be removed (a removal patch
records the full preimage, so we check what you have in your
working tree matches it in full -- otherwise we would risk
losing your local changes), which again is done by directly
opening and reading the file.
These checks need to be adjusted so that they are not fooled by
symlinks in the middle.
- To make sure something does not exist, first lstat(). If it
does not exist, it does not, so be happy. If it _does_, we
might be getting fooled by a symlink in the middle, so break
leading paths and see if there are symlinks involved. When
we are checking for a path a/b/c/d, if any of a, a/b, a/b/c
is a symlink, then a/b/c/d does _NOT_ exist, for the purpose
of our test.
This would fix this particular case you saw, and would not
add extra overhead in the usual case.
- To make sure something already exists, first lstat(). If it
does not exist, barf (up to this, we already do). Even if it
does seem to exist, we might be getting fooled by a symlink
in the middle, so make sure leading paths are not symlinks.
This would make the normal codepath much more expensive for
deep trees, which is a bit worrisome.
This patch implements the first side of the check "making sure
it does not exist". The latter "making sure it exists" check is
not done yet, so applying the patch in reverse would still
fail, but we have to start from somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When we are applying a patch that creates a blob at a path, or
when we are switching from a branch that does not have a blob at
the path to another branch that has one, we need to make sure
that there is nothing at the path in the working tree, as such a
file is a local modification made by the user that would be lost
by the operation.
Normally, lstat() on the path and making sure ENOENT is returned
is good enough for that purpose. However there is a twist. We
may be creating a regular file arch/x86_64/boot/Makefile, while
removing an existing symbolic link at arch/x86_64/boot that
points at existing ../i386/boot directory that has Makefile in
it. We always first check without touching filesystem and then
perform the actual operation, so when we verify the new file,
arch/x86_64/boot/Makefile, does not exist, we haven't removed
the symbolic link arc/x86_64/boot symbolic link yet. lstat() on
the file sees through the symbolic link and reports the file is
there, which is not what we want.
The function has_symlink_leading_path() function takes a path,
and sees if any of the leading directory component is a symbolic
link.
When files in a new directory are created, we tend to process
them together because both index and tree are sorted. The
function takes advantage of this and allows the caller to cache
and reuse which symbolic link on the filesystem caused the
function to return true.
The calling sequence would be:
char last_symlink[PATH_MAX];
*last_symlink = '\0';
for each index entry {
if (!lose)
continue;
if (lstat(it))
if (errno == ENOENT)
; /* happy */
else
error;
else if (has_symlink_leading_path(it, last_symlink))
; /* happy */
else
error; /* would lose local changes */
unlink_entry(it, last_symlink);
}
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| | |
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| | |
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| | |
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| | |
| |
| |
| |
| |
| |
| |
| | |
We now write to MERGE_MSG, not .msg. I missed this earlier
when I changed the target we write to.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* 'master' of git://repo.or.cz/git-gui:
git gui 0.7.0
git-gui: Paperbag fix blame in subdirectory
git-gui: Format author/committer times in ISO format
git-gui: Cleanup minor nits in blame code
git-gui: Generate blame on uncommitted working tree file
git-gui: Smarter command line parsing for browser, blame
git-gui: Use prefix if blame is run in a subdirectory
git-gui: Convert blame to the "class" way of doing things
git-gui: Don't attempt to inline array reads in methods
git-gui: Convert browser, console to "class" format
git-gui: Define a simple class/method system
git-gui: Allow shift-{k,j} to select a range of branches to merge
git-gui: Call changes "Staged" and "Unstaged" in file list titles.
|
| | | |
| | |
| | |
| | | |
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | | |
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | | |
This is a simple change to match what gitk does when it shows
a commit; we format using ISO dates (yyyy-mm-dd HH:MM:SS).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
We can use [list ...] rather than "", especially when we are talking
about values as then they are properly escaped if necessary. Small
nit, but probably not a huge deal as the only data being inlined here
is Tk paths.
Some of the lines in the parser code were longer than 80 characters
wide, and they actually were all the same value on the end part of
the line. Rather than keeping the mess copied-and-pasted around we
can set the last argument into a local variable and reuse it many
times.
The commit display code was also rather difficult to read on an 80
character wide terminal, so I'm moving it all into a double quoted
string that is easier to read.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
If the user doesn't give us a revision parameter to our blame
subcommand then we can generate blame against the working tree
file by passing the file path off to blame with the --contents
argument. In this case we cannot obtain the contents of the
file from the ODB; instead we must obtain the contents by
reading the working directory file as-is.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The browser subcommand now optionally accepts a single revision
argument; if no revision argument is supplied then we use the
current branch as the tree to browse. This is very common, so
its a nice option.
Our blame subcommand now tries to perform the same assumptions
as the command line git-blame; both the revision and the file
are optional. We assume the argument is a filename if the file
exists in the working directory, otherwise we assume the argument
is a revision name. A -- can be supplied between the two to force
parsing, or before the filename to force it to be a filename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
I think it was Andy Parkins who pointed out that git gui blame HEAD f
does not work if f is in a subdirectory and we are currently running
git-gui within that subdirectory. This is happening because we did
not take the user's prefix into account when we computed the file
path in the repository.
We now assume the prefix as returned by rev-parse --show-prefix is
valid and we use that during the command line blame subcommand when
we apply the parameters.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Our blame viewer code has historically been a mess simply
because the data for multiple viewers was all crammed into
a single pair of Tcl arrays. This made the code hard to
read and even harder to maintain.
Now that we have a slightly better way of tracking the data
for our "meta-widgets" we can make use of it here in the
blame viewer to cleanup the code and make it easier to work
with long term.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
If a variable reference to a field is to an array, and it is
the only reference to that field in that method we cannot make
it an inlined [set foo] call as the regexp was converting the
Tcl code wrong. We were producing "[set foo](x)" for "$foo(x)",
and that isn't valid Tcl when foo is an array. So we just punt
if the only occurance has a ( after it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Now that we have a slightly easier method of working with per-widget
data we should make use of that technique in our browser and console
meta-widgets, as both have a decent amount of information that they
store on a per-widget basis and our current approach of handling
it is difficult to follow.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
As most of the git-gui interface is based upon "meta-widgets"
that need to carry around a good deal of state (e.g. console
windows, browser windows, blame viewer) we have a good deal
of messy code that tries to store this meta-widget state in
global arrays, where keys into the array are formed from a
union of a unique "object instance id" and the field name.
This is a simple class system for Tcl that allows us to
hide much of that mess by making Tcl do what it does best;
process strings to manipulate its own code during startup.
Each object instance is placed into its own namespace. The
namespace is created when the object instance is created and
the namespace is destroyed when the object instance is removed
from the system. Within that namespace we place variables for
each field within the class; these variables can themselves be
scalar values or full-blown Tcl arrays.
A simple class might be defined as:
class map {
field data
field size 0
constructor {} {
return $this
}
method set {name value} {
set data($name) $value
incr size
}
method size {} {
return $size
} ifdeleted { return 0 }
}
All fields must be declared before any constructors or methods. This
allows our class to generate a list of the fields so it can properly
alter the definition of the constructor and method bodies prior to
passing them off to Tcl for definition with proc. A field may optionally
be given a default/initial value. This can only be done for non-array
type fields.
Constructors are given full access to all fields of the class, so they
can initialize the data values. The default values of fields (if any)
are set before the constructor runs, and the implicit local variable
$this is initialized to the instance identifier.
Methods are given access to fields they actually use in their body.
Every method has an implicit "this" argument inserted as its first
parameter; callers of methods must be sure they supply this value.
Some basic optimization tricks are performed (but not much). We
try to only upvar (locally bind) fields that are accessed within a
method, but we err on the side of caution and may upvar more than
we need to. If a variable is accessed only once within a method
and that access is by $foo (read) we avoid the upvar and instead
use [set foo] to obtain the value. This is slightly faster as Tcl
does not need to lookup the variable twice.
We also offer some small syntatic sugar for interacting with Tk and
the fileevent callback system in Tcl. If a field (say "foo") is used
as "@foo" we insert instead the true global variable name of that
variable into the body of the constructor or method. This allows easy
binding to Tk textvariable options, e.g.:
label $w.title -textvariable @title
Proper namespace callbacks can also be setup with the special cb proc
that is defined in each namespace. [cb _foo a] will invoke the method
_foo in the current namespace, passing it $this as the first (implied)
parameter and a as the second parameter. This makes it very simple to
connect an object instance to a -command option for a Tk widget or to
a fileevent readable or writable for a file channel.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
I found it useful to be able to use j/k (vi-like keys) to move
up and down the list of branches to merge and shift-j/k to do
the selection, much as shift-up/down (arrow keys) would alter
the selection.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | |\ \
| | | |
| | | |
| | | | |
* maint:
git-gui: Call changes "Staged" and "Unstaged" in file list titles.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
All menu entries talk about "staging" and "unstaging" changes, but the
titles of the file lists use different wording, which may confuse
newcomers.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| |\ \ \ \
| | |_|/
| |/| |
| | | |
| | | |
| | | | |
* maint:
Fix documentation of tag in git-fast-import.txt
Properly handle '0' filenames in import-tars
|
| | |\ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
* 'maint' of git://repo.or.cz/git/fastimport:
Fix documentation of tag in git-fast-import.txt
Properly handle '0' filenames in import-tars
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The tag command does not take a trailing LF.
Signed-off-by: Richard P. Curnow <rc@rc0.org.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| | | |\ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
* gfi-maint:
Properly handle '0' filenames in import-tars
|
