1 files changed, 66 insertions, 52 deletions

diff --git a/git-stash.sh b/git-stash.sh
index 7561b374d2..5619da5c10 100755
--- a/git-stash.sh
+++ b/git-stash.sh
@@ -12,12 +12,15 @@ USAGE="list [<options>]
 
 SUBDIRECTORY_OK=Yes
 OPTIONS_SPEC=
+START_DIR=`pwd`
 . git-sh-setup
+. git-sh-i18n
 require_work_tree
 cd_to_toplevel
 
 TMP="$GIT_DIR/.git-stash.$$"
-trap 'rm -f "$TMP-*"' 0
+TMPindex=${GIT_INDEX_FILE-"$GIT_DIR/index"}.stash.$$
+trap 'rm -f "$TMP-"* "$TMPindex"' 0
 
 ref_stash=refs/stash
 
@@ -37,7 +40,7 @@ no_changes () {
 clear_stash () {
 	if test $# != 0
 	then
-		die "git stash clear with parameters is unimplemented"
+		die "$(gettext "git stash clear with parameters is unimplemented")"
 	fi
 	if current=$(git rev-parse --verify $ref_stash 2>/dev/null)
 	then
@@ -59,7 +62,7 @@ create_stash () {
 	then
 		head=$(git rev-list --oneline -n 1 HEAD --)
 	else
-		die "You do not have the initial commit yet"
+		die "$(gettext "You do not have the initial commit yet")"
 	fi
 
 	if branch=$(git symbolic-ref -q HEAD)
@@ -74,23 +77,21 @@ create_stash () {
 	i_tree=$(git write-tree) &&
 	i_commit=$(printf 'index on %s\n' "$msg" |
 		git commit-tree $i_tree -p $b_commit) ||
-		die "Cannot save the current index state"
+		die "$(gettext "Cannot save the current index state")"
 
 	if test -z "$patch_mode"
 	then
 
 		# state of the working tree
 		w_tree=$( (
-			rm -f "$TMP-index" &&
-			cp -p ${GIT_INDEX_FILE-"$GIT_DIR/index"} "$TMP-index" &&
-			GIT_INDEX_FILE="$TMP-index" &&
+			git read-tree --index-output="$TMPindex" -m $i_tree &&
+			GIT_INDEX_FILE="$TMPindex" &&
 			export GIT_INDEX_FILE &&
-			git read-tree -m $i_tree &&
 			git diff --name-only -z HEAD | git update-index -z --add --remove --stdin &&
 			git write-tree &&
-			rm -f "$TMP-index"
+			rm -f "$TMPindex"
 		) ) ||
-			die "Cannot save the current worktree state"
+			die "$(gettext "Cannot save the current worktree state")"
 
 	else
 
@@ -103,14 +104,14 @@ create_stash () {
 
 		# state of the working tree
 		w_tree=$(GIT_INDEX_FILE="$TMP-index" git write-tree) ||
-		die "Cannot save the current worktree state"
+		die "$(gettext "Cannot save the current worktree state")"
 
 		git diff-tree -p HEAD $w_tree > "$TMP-patch" &&
 		test -s "$TMP-patch" ||
-		die "No changes selected"
+		die "$(gettext "No changes selected")"
 
 		rm -f "$TMP-index" ||
-		die "Cannot remove temporary index (can't happen)"
+		die "$(gettext "Cannot remove temporary index (can't happen)")"
 
 	fi
 
@@ -123,7 +124,7 @@ create_stash () {
 	fi
 	w_commit=$(printf '%s\n' "$stash_msg" |
 		git commit-tree $w_tree -p $b_commit -p $i_commit) ||
-		die "Cannot record working tree state"
+		die "$(gettext "Cannot record working tree state")"
 }
 
 save_stash () {
@@ -136,11 +137,12 @@ save_stash () {
 			keep_index=t
 			;;
 		--no-keep-index)
-			keep_index=
+			keep_index=n
 			;;
 		-p|--patch)
 			patch_mode=t
-			keep_index=t
+			# only default to keep if we don't already have an override
+			test -z "$keep_index" && keep_index=t
 			;;
 		-q|--quiet)
 			GIT_QUIET=t
@@ -150,8 +152,19 @@ save_stash () {
 			break
 			;;
 		-*)
-			echo "error: unknown option for 'stash save': $1"
-			echo "       To provide a message, use git stash save -- '$1'"
+			option="$1"
+			# TRANSLATORS: $option is an invalid option, like
+			# `--blah-blah'. The 7 spaces at the beginning of the
+			# second line correspond to "error: ". So you should line
+			# up the second line with however many characters the
+			# translation of "error: " takes in your language. E.g. in
+			# English this is:
+			#
+			#    $ git stash save --blah-blah 2>&1 | head -n 2
+			#    error: unknown option for 'stash save': --blah-blah
+			#           To provide a message, use git stash save -- '--blah-blah'
+			eval_gettext "$("error: unknown option for 'stash save': \$option
+       To provide a message, use git stash save -- '\$option'")"; echo
 			usage
 			;;
 		*)
@@ -166,11 +179,11 @@ save_stash () {
 	git update-index -q --refresh
 	if no_changes
 	then
-		say 'No local changes to save'
+		say "$(gettext "No local changes to save")"
 		exit 0
 	fi
 	test -f "$GIT_DIR/logs/$ref_stash" ||
-		clear_stash || die "Cannot initialize stash"
+		clear_stash || die "$(gettext "Cannot initialize stash")"
 
 	create_stash "$stash_msg"
 
@@ -178,22 +191,22 @@ save_stash () {
 	: >>"$GIT_DIR/logs/$ref_stash"
 
 	git update-ref -m "$stash_msg" $ref_stash $w_commit ||
-		die "Cannot save the current status"
+		die "$(gettext "Cannot save the current status")"
 	say Saved working directory and index state "$stash_msg"
 
 	if test -z "$patch_mode"
 	then
 		git reset --hard ${GIT_QUIET:+-q}
 
-		if test -n "$keep_index" && test -n $i_tree
+		if test "$keep_index" = "t" && test -n $i_tree
 		then
 			git read-tree --reset -u $i_tree
 		fi
 	else
 		git apply -R < "$TMP-patch" ||
-		die "Cannot remove worktree changes"
+		die "$(gettext "Cannot remove worktree changes")"
 
-		if test -z "$keep_index"
+		if test "$keep_index" != "t"
 		then
 			git reset
 		fi
@@ -264,7 +277,7 @@ parse_flags_and_rev()
 	b_tree=
 	i_tree=
 
-	REV=$(git rev-parse --no-flags --symbolic "$@" 2>/dev/null)
+	REV=$(git rev-parse --no-flags --symbolic "$@") || exit 1
 
 	FLAGS=
 	for opt
@@ -286,18 +299,21 @@ parse_flags_and_rev()
 
 	case $# in
 		0)
-			have_stash || die "No stash found."
+			have_stash || die "$(gettext "No stash found.")"
 			set -- ${ref_stash}@{0}
 		;;
 		1)
 			:
 		;;
 		*)
-			die "Too many revisions specified: $REV"
+			die "$(eval_gettext "Too many revisions specified: \$REV")"
 		;;
 	esac
 
-	REV=$(git rev-parse --quiet --symbolic --verify $1 2>/dev/null) || die "$1 is not valid reference"
+	REV=$(git rev-parse --quiet --symbolic --verify $1 2>/dev/null) || {
+		reference="$1"
+		die "$(eval_gettext "\$reference is not valid reference")"
+	}
 
 	i_commit=$(git rev-parse --quiet --verify $REV^2 2>/dev/null) &&
 	set -- $(git rev-parse $REV $REV^1 $REV: $REV^1: $REV^2: 2>/dev/null) &&
@@ -310,16 +326,6 @@ parse_flags_and_rev()
 	IS_STASH_LIKE=t &&
 	test "$ref_stash" = "$(git rev-parse --symbolic-full-name "${REV%@*}")" &&
 	IS_STASH_REF=t
-
-	if test "${REV}" != "${REV%{*\}}"
-	then
-		# maintainers: it would be better if git rev-parse indicated
-		# this condition with a non-zero status code but as of 1.7.2.1 it
-		# it did not. So, we use non-empty stderr output as a proxy for the
-		# condition of interest.
-		test -z "$(git rev-parse "$REV" 2>&1 >/dev/null)" || die "$REV does not exist in the stash log"
-	fi
-
 }
 
 is_stash_like()
@@ -329,7 +335,10 @@ is_stash_like()
 }
 
 assert_stash_like() {
-	is_stash_like "$@" || die "'$*' is not a stash-like commit"
+	is_stash_like "$@" || {
+		args="$*"
+		die "$(eval_gettext "'\$args' is not a stash-like commit")"
+	}
 }
 
 is_stash_ref() {
@@ -337,20 +346,21 @@ is_stash_ref() {
 }
 
 assert_stash_ref() {
-	is_stash_ref "$@" || die "'$*' is not a stash reference"
+	is_stash_ref "$@" || {
+		args="$*"
+		die "$(eval_gettext "'\$args' is not a stash reference")"
+	}
 }
 
 apply_stash () {
 
 	assert_stash_like "$@"
 
-	git update-index -q --refresh &&
-	git diff-files --quiet --ignore-submodules ||
-		die 'Cannot apply to a dirty working tree, please stage your changes'
+	git update-index -q --refresh || die "$(gettext "unable to refresh index")"
 
 	# current index state
 	c_tree=$(git write-tree) ||
-		die 'Cannot apply a stash in the middle of a merge'
+		die "$(gettext "Cannot apply a stash in the middle of a merge")"
 
 	unstashed_index_tree=
 	if test -n "$INDEX_OPTION" && test "$b_tree" != "$i_tree" &&
@@ -358,9 +368,9 @@ apply_stash () {
 	then
 		git diff-tree --binary $s^2^..$s^2 | git apply --cached
 		test $? -ne 0 &&
-			die 'Conflicts in index. Try without --index.'
+			die "$(gettext "Conflicts in index. Try without --index.")"
 		unstashed_index_tree=$(git write-tree) ||
-			die 'Could not save index tree'
+			die "$(gettext "Could not save index tree")"
 		git reset
 	fi
 
@@ -386,7 +396,7 @@ apply_stash () {
 			git diff-index --cached --name-only --diff-filter=A $c_tree >"$a" &&
 			git read-tree --reset $c_tree &&
 			git update-index --add --stdin <"$a" ||
-				die "Cannot unstage modified files"
+				die "$(gettext "Cannot unstage modified files")"
 			rm -f "$a"
 		fi
 		squelch=
@@ -394,13 +404,16 @@ apply_stash () {
 		then
 			squelch='>/dev/null 2>&1'
 		fi
-		eval "git status $squelch" || :
+		(cd "$START_DIR" && eval "git status $squelch") || :
 	else
 		# Merge conflict; keep the exit status from merge-recursive
 		status=$?
 		if test -n "$INDEX_OPTION"
 		then
-			echo >&2 'Index was not unstashed.'
+			(
+				gettext "Index was not unstashed." &&
+				echo
+			) >&2
 		fi
 		exit $status
 	fi
@@ -417,14 +430,15 @@ drop_stash () {
 	assert_stash_ref "$@"
 
 	git reflog delete --updateref --rewrite "${REV}" &&
-		say "Dropped ${REV} ($s)" || die "${REV}: Could not drop stash entry"
+		say "$(eval_gettext "Dropped \${REV} (\$s)")" ||
+		die "$(eval_gettext "\${REV}: Could not drop stash entry")"
 
 	# clear_stash if we just dropped the last stash entry
 	git rev-parse --verify "$ref_stash@{0}" > /dev/null 2>&1 || clear_stash
 }
 
 apply_to_branch () {
-	test -n "$1" || die 'No branch name specified'
+	test -n "$1" || die "$(gettext "No branch name specified")"
 	branch=$1
 	shift 1
 
@@ -495,7 +509,7 @@ branch)
 	case $# in
 	0)
 		save_stash &&
-		say '(To restore them type "git stash apply")'
+		say "$(gettext "(To restore them type \"git stash apply\")")"
 		;;
 	*)
 		usage