summaryrefslogtreecommitdiff
path: root/git-cvsexportcommit.perl
diff options
context:
space:
mode:
authorRobin Rosenberg <robin.rosenberg@dewire.com>2006-12-11 00:30:06 +0100
committerJunio C Hamano <junkio@cox.net>2006-12-11 14:16:54 -0800
commite86ad71fe5f53ae4434566bd09ea4256090e5a3a (patch)
tree0ec09f3db2242e1ced80374ebe9a5c5df228c418 /git-cvsexportcommit.perl
parent6f9872582246b9b8ee4bdc9f6a563b409aab1ecb (diff)
downloadgit-e86ad71fe5f53ae4434566bd09ea4256090e5a3a.tar.gz
Make cvsexportcommit work with filenames with spaces and non-ascii characters.
This patch uses git-apply to do the patching which simplifies the code a lot and also uses one pass to git-diff. git-apply gives information on added, removed files as well as which files are binary. Removed the test for checking for matching binary files when deleting them since git-apply happily deletes the file. This is matter of taste since we allow some fuzz for text patches also. Error handling was cleaned up, but not much tested. Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Diffstat (limited to 'git-cvsexportcommit.perl')
-rwxr-xr-xgit-cvsexportcommit.perl203
1 files changed, 65 insertions, 138 deletions
diff --git a/git-cvsexportcommit.perl b/git-cvsexportcommit.perl
index c9d1d88f2e..4863c91fe3 100755
--- a/git-cvsexportcommit.perl
+++ b/git-cvsexportcommit.perl
@@ -2,9 +2,8 @@
# Known limitations:
# - does not propagate permissions
-# - tells "ready for commit" even when things could not be completed
-# (not sure this is true anymore, more testing is needed)
-# - does not handle whitespace in pathnames at all.
+# - error handling has not been extensively tested
+#
use strict;
use Getopt::Std;
@@ -115,49 +114,40 @@ if ($opt_a) {
}
close MSG;
-my (@afiles, @dfiles, @mfiles, @dirs);
-my %amodes;
-my @files = safe_pipe_capture('git-diff-tree', '-r', $parent, $commit);
-#print @files;
-$? && die "Error in git-diff-tree";
-foreach my $f (@files) {
- chomp $f;
- my @fields = split(m!\s+!, $f);
- if ($fields[4] eq 'A') {
- my $path = $fields[5];
- $amodes{$path} = $fields[1];
- push @afiles, $path;
- # add any needed parent directories
- $path = dirname $path;
- while (!-d $path and ! grep { $_ eq $path } @dirs) {
- unshift @dirs, $path;
- $path = dirname $path;
- }
- }
- if ($fields[4] eq 'M') {
- push @mfiles, $fields[5];
- }
- if ($fields[4] eq 'D') {
- push @dfiles, $fields[5];
- }
+`git-diff-tree --binary -p $parent $commit >.cvsexportcommit.diff`;# || die "Cannot diff";
+
+## apply non-binary changes
+my $fuzz = $opt_p ? 0 : 2;
+
+print "Checking if patch will apply\n";
+
+my @stat;
+open APPLY, "GIT_DIR= git-apply -C$fuzz --binary --summary --numstat<.cvsexportcommit.diff|" || die "cannot patch";
+@stat=<APPLY>;
+close APPLY || die "Cannot patch";
+my (@bfiles,@files,@afiles,@dfiles);
+chomp @stat;
+foreach (@stat) {
+ push (@bfiles,$1) if m/^-\t-\t(.*)$/;
+ push (@files, $1) if m/^-\t-\t(.*)$/;
+ push (@files, $1) if m/^\d+\t\d+\t(.*)$/;
+ push (@afiles,$1) if m/^ create mode [0-7]+ (.*)$/;
+ push (@dfiles,$1) if m/^ delete mode [0-7]+ (.*)$/;
}
-my (@binfiles, @abfiles, @dbfiles, @bfiles, @mbfiles);
-@binfiles = grep m/^Binary files/, safe_pipe_capture('git-diff-tree', '-p', $parent, $commit);
-map { chomp } @binfiles;
-@abfiles = grep s/^Binary files \/dev\/null and b\/(.*) differ$/$1/, @binfiles;
-@dbfiles = grep s/^Binary files a\/(.*) and \/dev\/null differ$/$1/, @binfiles;
-@mbfiles = grep s/^Binary files a\/(.*) and b\/(.*) differ$/$1/, @binfiles;
-push @bfiles, @abfiles;
-push @bfiles, @dbfiles;
-push @bfiles, @mbfiles;
-push @mfiles, @mbfiles;
-
-$opt_v && print "The commit affects:\n ";
-$opt_v && print join ("\n ", @afiles,@mfiles,@dfiles) . "\n\n";
-undef @files; # don't need it anymore
+map { s/^"(.*)"$/$1/g } @bfiles,@files;
+map { s/\\([0-7]{3})/sprintf('%c',oct $1)/eg } @bfiles,@files;
# check that the files are clean and up to date according to cvs
my $dirty;
+my @dirs;
+foreach my $p (@afiles) {
+ my $path = dirname $p;
+ while (!-d $path and ! grep { $_ eq $path } @dirs) {
+ unshift @dirs, $path;
+ $path = dirname $path;
+ }
+}
+
foreach my $d (@dirs) {
if (-e $d) {
$dirty = 1;
@@ -180,7 +170,8 @@ foreach my $f (@afiles) {
}
}
-foreach my $f (@mfiles, @dfiles) {
+foreach my $f (@files) {
+ next if grep { $_ eq $f } @afiles;
# TODO:we need to handle removed in cvs
my @status = grep(m/^File/, safe_pipe_capture('cvs', '-q', 'status' ,$f));
if (@status > 1) { warn 'Strange! cvs status returned more than one line?'};
@@ -197,87 +188,26 @@ if ($dirty) {
}
}
-###
-### NOTE: if you are planning to die() past this point
-### you MUST call cleanupcvs(@files) before die()
-###
+print "Applying\n";
+`GIT_DIR= git-apply -C$fuzz --binary --summary --numstat --apply <.cvsexportcommit.diff` || die "cannot patch";
-
-print "Creating new directories\n";
+print "Patch applied successfully. Adding new files and directories to CVS\n";
+my $dirtypatch = 0;
foreach my $d (@dirs) {
- unless (mkdir $d) {
- warn "Could not mkdir $d: $!";
- $dirty = 1;
- }
- `cvs add $d`;
- if ($?) {
- $dirty = 1;
+ if (system('cvs','add',$d)) {
+ $dirtypatch = 1;
warn "Failed to cvs add directory $d -- you may need to do it manually";
}
}
-print "'Patching' binary files\n";
-
-foreach my $f (@bfiles) {
- # check that the file in cvs matches the "old" file
- # extract the file to $tmpdir and compare with cmp
- if (not(grep { $_ eq $f } @afiles)) {
- my $tree = safe_pipe_capture('git-rev-parse', "$parent^{tree}");
- chomp $tree;
- my $blob = `git-ls-tree $tree "$f" | cut -f 1 | cut -d ' ' -f 3`;
- chomp $blob;
- `git-cat-file blob $blob > $tmpdir/blob`;
- if (system('cmp', '-s', $f, "$tmpdir/blob")) {
- warn "Binary file $f in CVS does not match parent.\n";
- if (not $opt_f) {
- $dirty = 1;
- next;
- }
- }
- }
- if (not(grep { $_ eq $f } @dfiles)) {
- my $tree = safe_pipe_capture('git-rev-parse', "$commit^{tree}");
- chomp $tree;
- my $blob = `git-ls-tree $tree "$f" | cut -f 1 | cut -d ' ' -f 3`;
- chomp $blob;
- # replace with the new file
- `git-cat-file blob $blob > $f`;
- }
-
- # TODO: something smart with file modes
-
-}
-if ($dirty) {
- cleanupcvs(@files);
- die "Exiting: Binary files in CVS do not match parent";
-}
-
-## apply non-binary changes
-my $fuzz = $opt_p ? 0 : 2;
-
-print "Patching non-binary files\n";
-
-if (scalar(@afiles)+scalar(@dfiles)+scalar(@mfiles) != scalar(@bfiles)) {
- print `(git-diff-tree -p $parent -p $commit | patch -p1 -F $fuzz ) 2>&1`;
-}
-
-my $dirtypatch = 0;
-if (($? >> 8) == 2) {
- cleanupcvs(@files);
- die "Exiting: Patch reported serious trouble -- you will have to apply this patch manually";
-} elsif (($? >> 8) == 1) { # some hunks failed to apply
- $dirtypatch = 1;
-}
-
foreach my $f (@afiles) {
- set_new_file_permissions($f, $amodes{$f});
if (grep { $_ eq $f } @bfiles) {
system('cvs', 'add','-kb',$f);
} else {
system('cvs', 'add', $f);
}
if ($?) {
- $dirty = 1;
+ $dirtypatch = 1;
warn "Failed to cvs add $f -- you may need to do it manually";
}
}
@@ -285,35 +215,40 @@ foreach my $f (@afiles) {
foreach my $f (@dfiles) {
system('cvs', 'rm', '-f', $f);
if ($?) {
- $dirty = 1;
+ $dirtypatch = 1;
warn "Failed to cvs rm -f $f -- you may need to do it manually";
}
}
print "Commit to CVS\n";
-print "Patch: $title\n";
-my $commitfiles = join(' ', @afiles, @mfiles, @dfiles);
-my $cmd = "cvs commit -F .msg $commitfiles";
+print "Patch title (first comment line): $title\n";
+my @commitfiles = map { unless (m/\s/) { '\''.$_.'\''; } else { $_; }; } (@files);
+my $cmd = "cvs commit -F .msg @commitfiles";
if ($dirtypatch) {
print "NOTE: One or more hunks failed to apply cleanly.\n";
- print "Resolve the conflicts and then commit using:\n";
+ print "You'll need to apply the patch in .cvsexportcommit.diff manually\n";
+ print "using a patch program. After applying the patch and resolving the\n";
+ print "problems you may commit using:";
print "\n $cmd\n\n";
exit(1);
}
-
if ($opt_c) {
print "Autocommit\n $cmd\n";
- print safe_pipe_capture('cvs', 'commit', '-F', '.msg', @afiles, @mfiles, @dfiles);
+ print safe_pipe_capture('cvs', 'commit', '-F', '.msg', @files);
if ($?) {
- cleanupcvs(@files);
die "Exiting: The commit did not succeed";
}
print "Committed successfully to CVS\n";
} else {
print "Ready for you to commit, just run:\n\n $cmd\n";
}
+
+# clean up
+unlink(".cvsexportcommit.diff");
+unlink(".msg");
+
sub usage {
print STDERR <<END;
Usage: GIT_DIR=/path/to/.git ${\basename $0} [-h] [-p] [-v] [-c] [-f] [-m msgprefix] [ parent ] commit
@@ -321,17 +256,6 @@ END
exit(1);
}
-# ensure cvs is clean before we die
-sub cleanupcvs {
- my @files = @_;
- foreach my $f (@files) {
- system('cvs', '-q', 'update', '-C', $f);
- if ($?) {
- warn "Warning! Failed to cleanup state of $f\n";
- }
- }
-}
-
# An alternative to `command` that allows input to be passed as an array
# to work around shell problems with weird characters in arguments
# if the exec returns non-zero we die
@@ -346,12 +270,15 @@ sub safe_pipe_capture {
return wantarray ? @output : join('',@output);
}
-# For any file we want to add to cvs, we must first set its permissions
-# properly, *before* the "cvs add ..." command. Otherwise, it is impossible
-# to change the permission of the file in the CVS repository using only cvs
-# commands. This should be fixed in cvs-1.12.14.
-sub set_new_file_permissions {
- my ($file, $perm) = @_;
- chmod oct($perm), $file
- or die "failed to set permissions of \"$file\": $!\n";
+sub safe_pipe_capture_blob {
+ my $output;
+ if (my $pid = open my $child, '-|') {
+ local $/;
+ undef $/;
+ $output = (<$child>);
+ close $child or die join(' ',@_).": $! $?";
+ } else {
+ exec(@_) or die "$! $?"; # exec() can fail the executable can't be found
+ }
+ return $output;
}