2004-08-26 Paolo Bonzini <bonzini@gnu.org>

	* Makefile.def (bootstrap stages): Add 'lean' parameter.
	* Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
	phony targets; do not generate timestamp files.
	(distclean-stageN): Remove references to their timestamp files.
	(restageN, touch-stageN): Remove.
	(stageN-bubble): Rewritten.
	(compare): Support lean bootstraps.
	* Makefile.in: Regenerate.

	* configure.in: Only warn when bootstrapping but
	build != host or build != target.  Support lean bootstraps.
	* configure: Regenerate.

	Sync from gcc:
	2004-08-26  Phil Edwards  <phil@codesourcery.com>

	* configure.in:  Give a better error message if GMP/MPFR are missing
	and a language needing them has been requested.
	* configure:  Regenerated.

	2004-08-25  Phil Edwards  <phil@codesourcery.com>

	* configure.in:  Print a list of available language front-ends if
	a requested one is missing.  Tidy stray tab characters.
	* configure:  Regenerated.

1 files changed, 108 insertions, 63 deletions

diff --git a/configure b/configure
index 90fc7d40b45..f76883b1adc 100755
--- a/configure
+++ b/configure
@@ -24,7 +24,7 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-gmp=PATH         Specify directory for installed GMP library"
 ac_help="$ac_help
-  --enable-bootstrap     Enable bootstrapping [no]"
+  --enable-bootstrap[=lean]     Enable bootstrapping [no]"
 ac_help="$ac_help
   --enable-serial-[{host,target,build}-]configure
                           Force sequential configuration of
@@ -2356,6 +2356,7 @@ if test -d ${srcdir}/gcc; then
 
   new_enable_languages=c
   missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+  potential_languages=c
 
   for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
     case ${lang_frag} in
@@ -2371,14 +2372,15 @@ if test -d ${srcdir}/gcc; then
         lang_dirs=
         boot_language=
         build_by_default=
-	need_gmp=
+        need_gmp=
         . ${lang_frag}
+        potential_languages="${potential_languages},${language}"
         # This is quite sensitive to the ordering of the case statement arms.
         case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
           *::*:*)
             echo "${lang_frag} doesn't set \$language." 1>&2
             exit 1
-	    ;;
+            ;;
           *:ada:no:*)
             # Ada was requested with no preexisting GNAT.  Disable unconditionally.
             add_this_lang=no
@@ -2389,9 +2391,9 @@ if test -d ${srcdir}/gcc; then
             ;;
           *,all,*:*:*:no)
             # 'all' was selected, but this is not a default language
-	    # so do not include it.
+            # so do not include it.
             add_this_lang=no
-	    ;;
+            ;;
           *,all,*:*:*:*)
             # 'all' was selected and this is a default language; include it.
             add_this_lang=yes
@@ -2401,10 +2403,17 @@ if test -d ${srcdir}/gcc; then
             ;;
         esac
 
-	# Disable language that need GMP if it isn't available.
-	if test  x"$need_gmp" = xyes && test x"$have_gmp" = xno; then
-	  add_this_lang=no
-	fi
+        # Disable languages that need GMP if it isn't available.
+        case ,${enable_languages},:${have_gmp}:${need_gmp} in
+          *,${language},*:no:yes)
+            # Specifically requested language; tell them.
+            { echo "configure: error: GMP with MPFR support is required to build $language" 1>&2; exit 1; }
+            ;;
+          *:no:yes)
+            # Silently disable.
+            add_this_lang=no
+            ;;
+        esac
         
 	case $add_this_lang in
 	  no)
@@ -2429,7 +2438,8 @@ if test -d ${srcdir}/gcc; then
   missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
   if test "x$missing_languages" != x; then
     { echo "configure: error: 
-The following requested languages were not found: ${missing_languages}" 1>&2; exit 1; }
+The following requested languages were not found: ${missing_languages}
+The available languages are: ${potential_languages}" 1>&2; exit 1; }
   fi
 
   if test "x$new_enable_languages" != "x$enable_languages"; then
@@ -2755,7 +2765,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2759: checking for $ac_word" >&5
+echo "configure:2769: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2790,7 +2800,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2794: checking for $ac_word" >&5
+echo "configure:2804: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2825,7 +2835,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2829: checking for $ac_word" >&5
+echo "configure:2839: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2860,7 +2870,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2864: checking for $ac_word" >&5
+echo "configure:2874: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2895,7 +2905,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2899: checking for $ac_word" >&5
+echo "configure:2909: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2930,7 +2940,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2934: checking for $ac_word" >&5
+echo "configure:2944: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3088,23 +3098,56 @@ if test "${enable_bootstrap+set}" = set; then
   enableval="$enable_bootstrap"
   :
 else
-  enable_bootstrap=no
+  enable_bootstrap=default
 fi
 
-if test -d ${srcdir}/gcc; then
-  case "$host:$target:$enable_bootstrap" in
-    $build:$build:yes | *:no) ;;
-    *:yes) { echo "configure: error: cannot bootstrap a cross-compiler" 1>&2; exit 1; } ;;
-    *) { echo "configure: error: invalid option for --enable-bootstrap" 1>&2; exit 1; } ;;
-  esac
-else
-  if test $enable_bootstrap = yes; then
-    { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; }
-  fi
-fi
 
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+  *gcc*) have_compiler=yes ;;
+  *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+  *:*:*:no) ;;
+
+  # Default behavior.  (We'll) enable bootstrap if we have a compiler
+  # and we are in a native configuration.
+  yes:$build:$build:default)
+    # This will become 'yes'
+    enable_bootstrap=no ;;
+
+  *:*:*:default)
+    enable_bootstrap=no ;;
+
+  # We have a compiler and we are in a native configuration, bootstrap is ok
+  yes:$build:$build:yes | yes:$build:$build:lean)
+    ;;
+
+  # Other configurations, but we have a compiler.  Assume the user knows
+  # what he's doing.
+  yes:*:*:yes | yes:*:*:lean)
+    echo "configure: warning: trying to bootstrap a cross compiler" 1>&2
+    ;;
+
+  # No compiler: if they passed --enable-bootstrap explicitly, fail
+  no:*:*:yes | no:*:*:lean)
+    { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } ;;
+
+  # Fail if wrong command line
+  *)
+    { echo "configure: error: invalid option for --enable-bootstrap" 1>&2; exit 1; }
+    ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
 case "$enable_bootstrap" in
   yes)
+    bootstrap_lean='#'
+    default_target=bootstrap
+    bootstrap_suffix=bootstrap ;;
+  lean)
+    bootstrap_lean=''
     default_target=bootstrap
     bootstrap_suffix=bootstrap ;;
   no)
@@ -3113,6 +3156,7 @@ case "$enable_bootstrap" in
 esac
 
 
+
 for module in ${build_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${build_subdir}/${module}/Makefile; then
@@ -3530,7 +3574,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3534: checking for $ac_word" >&5
+echo "configure:3578: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3563,7 +3607,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3567: checking for $ac_word" >&5
+echo "configure:3611: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3602,7 +3646,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3606: checking for $ac_word" >&5
+echo "configure:3650: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3635,7 +3679,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3639: checking for $ac_word" >&5
+echo "configure:3683: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3674,7 +3718,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3678: checking for $ac_word" >&5
+echo "configure:3722: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3707,7 +3751,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3711: checking for $ac_word" >&5
+echo "configure:3755: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3746,7 +3790,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3750: checking for $ac_word" >&5
+echo "configure:3794: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3779,7 +3823,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3783: checking for $ac_word" >&5
+echo "configure:3827: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3818,7 +3862,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3822: checking for $ac_word" >&5
+echo "configure:3866: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3851,7 +3895,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3855: checking for $ac_word" >&5
+echo "configure:3899: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3890,7 +3934,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3894: checking for $ac_word" >&5
+echo "configure:3938: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3923,7 +3967,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3927: checking for $ac_word" >&5
+echo "configure:3971: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3962,7 +4006,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3966: checking for $ac_word" >&5
+echo "configure:4010: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3995,7 +4039,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3999: checking for $ac_word" >&5
+echo "configure:4043: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4034,7 +4078,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4038: checking for $ac_word" >&5
+echo "configure:4082: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4067,7 +4111,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4071: checking for $ac_word" >&5
+echo "configure:4115: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4106,7 +4150,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4110: checking for $ac_word" >&5
+echo "configure:4154: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4139,7 +4183,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4143: checking for $ac_word" >&5
+echo "configure:4187: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4185,7 +4229,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4189: checking for $ac_word" >&5
+echo "configure:4233: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4218,7 +4262,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4222: checking for $ac_word" >&5
+echo "configure:4266: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4257,7 +4301,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4261: checking for $ac_word" >&5
+echo "configure:4305: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4290,7 +4334,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4294: checking for $ac_word" >&5
+echo "configure:4338: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4329,7 +4373,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4333: checking for $ac_word" >&5
+echo "configure:4377: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4362,7 +4406,7 @@ if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4366: checking for $ac_word" >&5
+echo "configure:4410: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4401,7 +4445,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4405: checking for $ac_word" >&5
+echo "configure:4449: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4434,7 +4478,7 @@ if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4438: checking for $ac_word" >&5
+echo "configure:4482: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4473,7 +4517,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4477: checking for $ac_word" >&5
+echo "configure:4521: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4506,7 +4550,7 @@ if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4510: checking for $ac_word" >&5
+echo "configure:4554: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4545,7 +4589,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4549: checking for $ac_word" >&5
+echo "configure:4593: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4578,7 +4622,7 @@ if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4582: checking for $ac_word" >&5
+echo "configure:4626: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4617,7 +4661,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4621: checking for $ac_word" >&5
+echo "configure:4665: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4650,7 +4694,7 @@ if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4654: checking for $ac_word" >&5
+echo "configure:4698: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4735,7 +4779,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4739: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4783: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4779,10 +4823,10 @@ esac
 
 
 # It makes debugging easier if we create as symlinks the stage directories
-# gcc for stageN-gcc and stage-prev for stage(N-1).  In case this is not
+# gcc for stageN-gcc and stagePREV-gcc for stage(N-1).  In case this is not
 # possible, however, we can resort to mv.
 echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4786: checking if symbolic links between directories work" >&5
+echo "configure:4830: checking if symbolic links between directories work" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5011,6 +5055,7 @@ s%@CONFIGURED_M4@%$CONFIGURED_M4%g
 s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g
 s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g
 s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g
+s%@bootstrap_lean@%$bootstrap_lean%g
 s%@default_target@%$default_target%g
 /@serialization_dependencies@/r $serialization_dependencies
 s%@serialization_dependencies@%%g