diff options
Diffstat (limited to 'libgcc/configure')
| -rw-r--r-- | libgcc/configure | 236 |
1 files changed, 160 insertions, 76 deletions
diff --git a/libgcc/configure b/libgcc/configure index 0506dcf8e40..192db62d0c2 100644 --- a/libgcc/configure +++ b/libgcc/configure @@ -627,6 +627,13 @@ build_subdir build_libsubdir target_noncanonical host_noncanonical +AWK +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +MAINT +slibdir +PICFLAG host_os host_vendor host_cpu @@ -635,12 +642,6 @@ build_os build_vendor build_cpu build -AWK -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -MAINT -slibdir enable_shared libgcc_topdir target_alias @@ -2197,6 +2198,159 @@ fi +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if test "${ac_cv_build+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if test "${ac_cv_host+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + + + + # FIXME: Do we need something for CFLAGS below? + +case "${host}" in + # PIC is the default on some targets or must not be used. + *-*-darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + PICFLAG=-fno-common + ;; + alpha*-dec-osf5*) + # PIC is the default. + ;; + hppa*64*-*-hpux*) + # PIC is the default for 64-bit PA HP-UX. + ;; + i3456786-*-cygwin* | i3456786-*-mingw* | x86_64-*-mingw*) + ;; + i3456786-*-interix3*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + i3456786-*-nto-qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + PICFLAG='-fPIC -shared' + ;; + i3456786-pc-msdosdjgpp*) + # DJGPP does not support shared libraries at all. + ;; + ia64*-*-hpux*) + # On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + # FIXME: Still in gcc 4.7? + PICFLAG=-fPIC + ;; + mips-sgi-irix6*) + # PIC is the default. + ;; + rs6000-ibm-aix* | powerpc-ibm-aix*) + # All AIX code is PIC. + ;; + + # Some targets support both -fPIC and -fpic, but prefer the latter. + # FIXME: Why? + i3456786-*-* | x86_64-*-*) + PICFLAG=-fpic + ;; + m68k-*-*) + PICFLAG=-fpic + ;; + s390*-*-*) + PICFLAG=-fpic + ;; + # FIXME: Override -fPIC default in libgcc only? + sh-*-linux* | sh2346lbe*-*-linux*) + PICFLAG=-fpic + ;; + # FIXME: Simplify to sh*-*-netbsd*? + sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \ + sh64-*-netbsd* | sh64l*-*-netbsd*) + PICFLAG=-fpic + ;; + sparc*-*-*) + # FIXME: This could be done everywhere -fpic and -fPIC differ. + case "${CFLAGS}" in + *-fpic*) + PICFLAG=-fpic + ;; + *) + PICFLAG=-fPIC + ;; + esac ;; + # Default to -fPIC unless specified otherwise. + *) + PICFLAG=-fPIC + ;; +esac + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for --enable-version-specific-runtime-libs" >&5 $as_echo_n "checking for --enable-version-specific-runtime-libs... " >&6; } # Check whether --enable-version-specific-runtime-libs was given. @@ -2385,76 +2539,6 @@ case ${AWK} in "") as_fn_error "can't build without awk, bailing out" "$LINENO" 5 ;; esac -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - case ${build_alias} in "") build_noncanonical=${build} ;; |