diff options
Diffstat (limited to 'boehm-gc/Makefile.orig')
| -rw-r--r-- | boehm-gc/Makefile.orig | 400 |
1 files changed, 400 insertions, 0 deletions
diff --git a/boehm-gc/Makefile.orig b/boehm-gc/Makefile.orig new file mode 100644 index 00000000000..056df2f66f7 --- /dev/null +++ b/boehm-gc/Makefile.orig @@ -0,0 +1,400 @@ +# Primary targets: +# gc.a - builds basic library +# libgc.a - builds library for use with g++ "-fgc-keyword" extension +# c++ - adds C++ interface to library +# cords - adds cords (heavyweight strings) to library +# test - prints porting information, then builds basic version of gc.a, +# and runs some tests of collector and cords. Does not add cords or +# c++ interface to gc.a +# cord/de - builds dumb editor based on cords. +ABI_FLAG= +CC=cc $(ABI_FLAG) +CXX=CC $(ABI_FLAG) +AS=as $(ABI_FLAG) +# The above doesn't work with gas, which doesn't run cpp. +# Define AS as `gcc -c -x assembler-with-cpp' instead. +# Under Irix 6, you will have to specify the ABI for as if you specify +# it for the C compiler. + +CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DALL_INTERIOR_POINTERS -DNO_EXECUTE_PERMISSION -DSILENT + +# Setjmp_test may yield overly optimistic results when compiled +# without optimization. +# -DSILENT disables statistics printing, and improves performance. +# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly +# altered stubborn objects, at substantial performance cost. +# Use only for incremental collector debugging. +# -DFIND_LEAK causes the collector to assume that all inaccessible +# objects should have been explicitly deallocated, and reports exceptions. +# Finalization and the test program are not usable in this mode. +# -DSOLARIS_THREADS enables support for Solaris (thr_) threads. +# (Clients should also define SOLARIS_THREADS and then include +# gc.h before performing thr_ or dl* or GC_ operations.) +# Must also define -D_REENTRANT +# -D_SOLARIS_PTHREADS enables support for Solaris pthreads. +# Define SOLARIS_THREADS as well. +# -DIRIX_THREADS enables support for Irix pthreads. See README.irix. +# -DALL_INTERIOR_POINTERS allows all pointers to the interior +# of objects to be recognized. (See gc_priv.h for consequences.) +# -DSMALL_CONFIG tries to tune the collector for small heap sizes, +# usually causing it to use less space in such situations. +# Incremental collection no longer works in this case. +# -DLARGE_CONFIG tunes the collector for unusually large heaps. +# Necessary for heaps larger than about 500 MB on most machines. +# Recommended for heaps larger than about 64 MB. +# -DDONT_ADD_BYTE_AT_END is meaningful only with +# -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS +# causes all objects to be padded so that pointers just past the end of +# an object can be recognized. This can be expensive. (The padding +# is normally more than one byte due to alignment constraints.) +# -DDONT_ADD_BYTE_AT_END disables the padding. +# -DNO_SIGNALS does not disable signals during critical parts of +# the GC process. This is no less correct than many malloc +# implementations, and it sometimes has a significant performance +# impact. However, it is dangerous for many not-quite-ANSI C +# programs that call things like printf in asynchronous signal handlers. +# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not +# have execute permission, i.e. it may be impossible to execute +# code from the heap. Currently this only affects the incremental +# collector on UNIX machines. It may greatly improve its performance, +# since this may avoid some expensive cache synchronization. +# -DOPERATOR_NEW_ARRAY declares that the C++ compiler supports the +# new syntax "operator new[]" for allocating and deleting arrays. +# See gc_cpp.h for details. No effect on the C part of the collector. +# This is defined implicitly in a few environments. +# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined +# as aliases for X, GC_realloc, and GC_free, respectively. +# Calloc is redefined in terms of the new malloc. X should +# be either GC_malloc or GC_malloc_uncollectable. +# The former is occasionally useful for working around leaks in code +# you don't want to (or can't) look at. It may not work for +# existing code, but it often does. Neither works on all platforms, +# since some ports use malloc or calloc to obtain system memory. +# (Probably works for UNIX, and win32.) +# -DIGNORE_FREE turns calls to free into a noop. Only useful with +# -DREDIRECT_MALLOC. +# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls. +# Reduces code size slightly at the expense of debuggability. +# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of +# order by specifying a nonstandard finalization mark procedure (see +# finalize.c). Objects reachable from finalizable objects will be marked +# in a sepearte postpass, and hence their memory won't be reclaimed. +# Not recommended unless you are implementing a language that specifies +# these semantics. +# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response +# to explicit GC_invoke_finalizers() calls. +# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable. +# This is useful if either the vendor malloc implementation is poor, +# or if REDIRECT_MALLOC is used. +# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly +# sets the heap block size. Each heap block is devoted to a single size and +# kind of object. For the incremental collector it makes sense to match +# the most likely page size. Otherwise large values result in more +# fragmentation, but generally better performance for large heaps. +# -DUSE_MMAP use MMAP instead of sbrk to get new memory. +# Works for Solaris and Irix. +# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than +# GC_scratch_alloc() to get stack memory. +# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever +# the garbage collector detects a value that looks almost, but not quite, +# like a pointer, print both the address containing the value, and the +# value of the near-bogus-pointer. Can be used to identifiy regions of +# memory that are likely to contribute misidentified pointers. +# -DOLD_BLOCK_ALLOC Use the old, possibly faster, large block +# allocation strategy. The new strategy tries harder to minimize +# fragmentation, sometimes at the expense of spending more time in the +# large block allocator and/or collecting more frequently. +# + + + +LIBGC_CFLAGS= -O -DNO_SIGNALS -DSILENT \ + -DREDIRECT_MALLOC=GC_malloc_uncollectable \ + -DDONT_ADD_BYTE_AT_END -DALL_INTERIOR_POINTERS +# Flags for building libgc.a -- the last two are required. + +CXXFLAGS= $(CFLAGS) +AR= ar +RANLIB= ranlib + + +# Redefining srcdir allows object code for the nonPCR version of the collector +# to be generated in different directories. In this case, the destination directory +# should contain a copy of the original include directory. +srcdir = . +VPATH = $(srcdir) + +OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o + +CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c + +CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c cord/cord.h cord/ec.h cord/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC cord/SCOPTIONS.amiga cord/SMakefile.amiga + +CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o + +SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \ + sparc_mach_dep.s gc.h gc_typed.h gc_hdrs.h gc_priv.h gc_private.h \ + config.h gc_mark.h include/gc_inl.h include/gc_inline.h gc.man \ + threadlibs.c if_mach.c if_not_there.c gc_cpp.cc gc_cpp.h weakpointer.h \ + gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h gc_alloc.h \ + sparc_sunos4_mach_dep.s solaris_threads.h $(CORD_SRCS) + +OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \ + README test.c test_cpp.cc setjmp_t.c SMakefile.amiga \ + SCoptions.amiga README.amiga README.win32 cord/README \ + cord/gc.h include/gc.h include/gc_typed.h include/cord.h \ + include/ec.h include/private/cord_pos.h include/private/config.h \ + include/private/gc_hdrs.h include/private/gc_priv.h \ + include/gc_cpp.h README.rs6000 \ + include/weakpointer.h README.QUICK callprocs pc_excludes \ + barrett_diagram README.OS2 README.Mac MacProjects.sit.hqx \ + MacOS.c EMX_MAKEFILE makefile.depend README.debugging \ + include/gc_cpp.h Mac_files/datastart.c Mac_files/dataend.c \ + Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \ + add_gc_prefix.c README.solaris2 README.sgi README.hp README.uts \ + win32_threads.c NT_THREADS_MAKEFILE gc.mak README.dj Makefile.dj \ + README.alpha README.linux version.h Makefile.DLLs gc_watcom.asm \ + WCC_MAKEFILE + +CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \ + $(srcdir)/cord/private/cord_pos.h + +UTILS= if_mach if_not_there threadlibs + +# Libraries needed for curses applications. Only needed for de. +CURSES= -lcurses -ltermlib + +# The following is irrelevant on most systems. But a few +# versions of make otherwise fork the shell specified in +# the SHELL environment variable. +SHELL= /bin/sh + +SPECIALCFLAGS = +# Alternative flags to the C compiler for mach_dep.c. +# Mach_dep.c often doesn't like optimization, and it's +# not time-critical anyway. +# Set SPECIALCFLAGS to -q nodirect_code on Encore. + +all: gc.a gctest + +pcr: PCR-Makefile gc_private.h gc_hdrs.h gc.h config.h mach_dep.o $(SRCS) + make -f PCR-Makefile depend + make -f PCR-Makefile + +$(OBJS) test.o dyn_load.o dyn_load_sunos53.o: $(srcdir)/gc_priv.h $(srcdir)/gc_hdrs.h $(srcdir)/gc.h \ + $(srcdir)/config.h $(srcdir)/gc_typed.h Makefile +# The dependency on Makefile is needed. Changing +# options such as -DSILENT affects the size of GC_arrays, +# invalidating all .o files that rely on gc_priv.h + +mark.o typd_mlc.o finalize.o: $(srcdir)/gc_mark.h + +base_lib gc.a: $(OBJS) dyn_load.o $(UTILS) + echo > base_lib + rm -f on_sparc_sunos5 + ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 + ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o + ./if_not_there on_sparc_sunos5 $(AR) ru gc.a $(OBJS) dyn_load.o + ./if_not_there on_sparc_sunos5 $(RANLIB) gc.a || cat /dev/null +# ignore ranlib failure; that usually means it doesn't exist, and isn't needed + +libgc.a: + make CFLAGS="$(LIBGC_CFLAGS)" clean gc.a gcc_support.o + mv gc.a libgc.a + rm -f on_sparc_sunos5 + ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 + ./if_mach SPARC SUNOS5 $(AR) rus libgc.a gcc_support.o + ./if_not_there on_sparc_sunos5 $(AR) ru libgc.a gcc_support.o + ./if_not_there on_sparc_sunos5 $(RANLIB) libgc.a || cat /dev/null + +cords: $(CORD_OBJS) cord/cordtest $(UTILS) + rm -f on_sparc_sunos5 + ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 + ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS) + ./if_not_there on_sparc_sunos5 $(AR) ru gc.a $(CORD_OBJS) + ./if_not_there on_sparc_sunos5 $(RANLIB) gc.a || cat /dev/null + +gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(srcdir)/gc.h Makefile + $(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc + +test_cpp: $(srcdir)/test_cpp.cc $(srcdir)/gc_cpp.h gc_cpp.o $(srcdir)/gc.h \ +base_lib $(UTILS) + rm -f test_cpp + ./if_mach HP_PA "" $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld + ./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a `./threadlibs` + +c++: gc_cpp.o $(srcdir)/gc_cpp.h test_cpp + rm -f on_sparc_sunos5 + ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 + ./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o + ./if_not_there on_sparc_sunos5 $(AR) ru gc.a gc_cpp.o + ./if_not_there on_sparc_sunos5 $(RANLIB) gc.a || cat /dev/null + ./test_cpp 1 + echo > c++ + +dyn_load_sunos53.o: dyn_load.c + $(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@ + +# SunOS5 shared library version of the collector +libgc.so: $(OBJS) dyn_load_sunos53.o + $(CC) -G -o libgc.so $(OBJS) dyn_load_sunos53.o -ldl + +# Alpha/OSF shared library version of the collector +libalphagc.so: $(OBJS) + ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc + ln libalphagc.so libgc.so + +# IRIX shared library version of the collector +libirixgc.so: $(OBJS) dyn_load.o + ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc + ln libirixgc.so libgc.so + +mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s $(srcdir)/mips_ultrix_mach_dep.s $(srcdir)/rs6000_mach_dep.s $(UTILS) + rm -f mach_dep.o + ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s + ./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s + ./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s + ./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s + ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s + ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s + ./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s + ./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c + +mark_rts.o: $(srcdir)/mark_rts.c if_mach if_not_there $(UTILS) + rm -f mark_rts.o + -./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c + ./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c +# Work-around for DEC optimizer tail recursion elimination bug. +# The ALPHA-specific line should be removed if gcc is used. + +alloc.o: version.h + +cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES) + $(CC) $(CFLAGS) -c $(srcdir)/cord/cordbscs.c + mv cordbscs.o cord/cordbscs.o +# not all compilers understand -o filename + +cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES) + $(CC) $(CFLAGS) -c $(srcdir)/cord/cordxtra.c + mv cordxtra.o cord/cordxtra.o + +cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES) + $(CC) $(CFLAGS) -c $(srcdir)/cord/cordprnt.c + mv cordprnt.o cord/cordprnt.o + +cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS) + rm -f cord/cordtest + ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb + ./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld + ./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs` + +cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS) + rm -f cord/de + ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb + ./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld + ./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses + ./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses + ./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses + ./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs` + +if_mach: $(srcdir)/if_mach.c $(srcdir)/config.h + $(CC) $(CFLAGS) -o if_mach $(srcdir)/if_mach.c + +threadlibs: $(srcdir)/threadlibs.c $(srcdir)/config.h Makefile + $(CC) $(CFLAGS) -o threadlibs $(srcdir)/threadlibs.c + +if_not_there: $(srcdir)/if_not_there.c + $(CC) $(CFLAGS) -o if_not_there $(srcdir)/if_not_there.c + +clean: + rm -f gc.a *.o gctest gctest_dyn_link test_cpp \ + setjmp_test mon.out gmon.out a.out core if_not_there if_mach \ + threadlibs $(CORD_OBJS) cord/cordtest cord/de + -rm -f *~ + +gctest: test.o gc.a if_mach if_not_there + rm -f gctest + ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest test.o gc.a -lucb + ./if_mach HP_PA "" $(CC) $(CFLAGS) -o gctest test.o gc.a -ldld + ./if_not_there gctest $(CC) $(CFLAGS) -o gctest test.o gc.a `./threadlibs` + +# If an optimized setjmp_test generates a segmentation fault, +# odds are your compiler is broken. Gctest may still work. +# Try compiling setjmp_t.c unoptimized. +setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/gc.h if_mach if_not_there + $(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c + +test: KandRtest cord/cordtest + cord/cordtest + +# Those tests that work even with a K&R C compiler: +KandRtest: setjmp_test gctest + ./setjmp_test + ./gctest + +add_gc_prefix: add_gc_prefix.c + $(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c + +gc.tar: $(SRCS) $(OTHER_FILES) add_gc_prefix + ./add_gc_prefix $(SRCS) $(OTHER_FILES) > /tmp/gc.tar-files + (cd $(srcdir)/.. ; tar cvfh - `cat /tmp/gc.tar-files`) > gc.tar + +pc_gc.tar: $(SRCS) $(OTHER_FILES) + tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES) + +floppy: pc_gc.tar + -mmd a:/cord + -mmd a:/cord/private + -mmd a:/include + -mmd a:/include/private + mkdir /tmp/pc_gc + cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -) + -mcopy -tmn /tmp/pc_gc/* a: + -mcopy -tmn /tmp/pc_gc/cord/* a:/cord + -mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord + -mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private + -mcopy -tmn /tmp/pc_gc/include/* a:/include + -mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private + rm -r /tmp/pc_gc + +gc.tar.Z: gc.tar + compress gc.tar + +gc.tar.gz: gc.tar + gzip gc.tar + +lint: $(CSRCS) test.c + lint -DLINT $(CSRCS) test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall" + +# BTL: added to test shared library version of collector. +# Currently works only under SunOS5. Requires GC_INIT call from statically +# loaded client code. +ABSDIR = `pwd` +gctest_dyn_link: test.o libgc.so + $(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link test.o -lgc -ldl -lthread + +gctest_irix_dyn_link: test.o libirixgc.so + $(CC) -L$(ABSDIR) -o gctest_irix_dyn_link test.o -lirixgc + +test_dll.o: test.c libgc_globals.h + $(CC) $(CFLAGS) -DGC_USE_DLL -c test.c -o test_dll.o + +test_dll: test_dll.o libgc_dll.a libgc.dll + $(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll + +SYM_PREFIX-libgc=GC + +# Uncomment the following line to build a GNU win32 DLL +# include Makefile.DLLs + +reserved_namespace: $(SRCS) + for file in $(SRCS) test.c test_cpp.cc; do \ + sed s/GC_/_GC_/g < $$file > tmp; \ + cp tmp $$file; \ + done + +user_namespace: $(SRCS) + for file in $(SRCS) test.c test_cpp.cc; do \ + sed s/_GC_/GC_/g < $$file > tmp; \ + cp tmp $$file; \ + done |