diff options
83 files changed, 542 insertions, 383 deletions
diff --git a/gcc/ChangeLog b/gcc/ChangeLog index f1641af3ff8..68c15afb19a 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,89 @@ +2014-11-01 Andrew MacLeod <amacleod@redhat,com> + + * optabs.h: Flatten insn-codes.h to source files. Move some prototypes + and structs to genopinit.c. Adjust protyoptypes to match optabs.c. + * genopinit.c (main): Emit prototypes and structs into insn-opinit.h. + * optabs.c: (gen_move_insn): Move to expr.c. + * expr.h: Move protypes and enums to optabs.h. + * expr.c: (gen_move_insn): Relocate from optabs.c. + * genemit.c (main): Include insn-codes.h. + * gengtype.c (open_base_files): Include insn-codes.h. + * asan.c: Include insn-codes.h. + * bb-reorder.c: Ditto. + * builtins.c: Ditto. + * calls.c: Ditto. + * cfgexpand.c: Ditto. + * cilk-common.c: Ditto. + * combine.c: Ditto. + * dojump.c: Ditto. + * dse.c: Ditto. + * except.c: Ditto. + * explow.c: Ditto. + * expmed.c: Ditto. + * function.c: Ditto. + * ifcvt.c: Ditto. + * internal-fn.c: Ditto. + * loop-unroll.c: Ditto. + * lra.c: Ditto. + * modulo-sched.c: Ditto. + * omp-low.c: Ditto. + * postreload.c: Ditto. + * ree.c: Ditto. + * reload.c: Ditto. + * reload1.c: Ditto. + * shrink-wrap.c: Ditto. + * simplify-rtx.c: Ditto. + * stmt.c: Ditto. + * target-globals.c: Ditto. + * targhooks.c: Ditto. + * toplev.c: Ditto. + * tree-if-conv.c: Ditto. + * tree-ssa-forwprop.c: Ditto. + * tree-ssa-loop-prefetch.c: Ditto. + * tree-ssa-math-opts.c: Ditto. + * tree-ssa-phiopt.c: Ditto. + * tree-ssa-reassoc.c: Ditto. + * tree-switch-conversion.c: Ditto. + * tree-vect-data-refs.c: Ditto. + * tree-vect-generic.c: Ditto. + * tree-vect-loop.c: Ditto. + * tree-vect-patterns.c: Ditto. + * tree-vect-slp.c: Ditto. + * tree-vect-stmts.c: Ditto. + * tree-vrp.c: Ditto. + * value-prof.c: Ditto. + * config/aarch64/aarch64-builtins.c: Ditto. + * config/alpha/alpha.c: Ditto. + * config/arm/arm.c: Ditto. + * config/cris/cris.c: Ditto. + * config/epiphany/epiphany.c: Ditto. + * config/frv/frv.c: Ditto. + * config/h8300/h8300.c: Ditto. + * config/ia64/ia64.c: Ditto. + * config/iq2000/iq2000.c: Ditto. + * config/m32c/m32c.c: Ditto. + * config/mep/mep.c: Ditto. + * config/microblaze/microblaze.c: Ditto. + * config/mips/mips.c: Ditto. + * config/mn10300/mn10300.c: Ditto. + * config/moxie/moxie.c: Ditto. + * config/msp430/msp430.c: Ditto. + * config/nios2/nios2.c: Ditto. + * config/pa/pa.c: Ditto. + * config/rl78/rl78.c: Ditto. + * config/rs6000/rs6000.c: Ditto. + * config/rx/rx.c: Ditto. + * config/s390/s390.c: Ditto. + * config/sh/sh.c: Ditto. + * config/sh/sh_treg_combine.cc: Ditto. + * config/spu/spu.c: Ditto. + * config/stormy16/stormy16.c: Ditto. + * config/tilegx/mul-tables.c: Ditto. + * config/tilegx/tilegx.c: Ditto. + * config/tilepro/mul-tables.c: Ditto. + * config/tilepro/tilepro.c: Ditto. + * config/vax/vax.c: Ditto. + 2014-11-01 James Greenhalgh <james.greenhalgh@arm.com> * doc/tm.texi.in (MOVE_BY_PIECES_P): Remove. diff --git a/gcc/asan.c b/gcc/asan.c index b4b08228933..8f146d2ce1d 100644 --- a/gcc/asan.c +++ b/gcc/asan.c @@ -60,6 +60,7 @@ along with GCC; see the file COPYING3. If not see #include "gimple-pretty-print.h" #include "target.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "output.h" #include "tm_p.h" diff --git a/gcc/bb-reorder.c b/gcc/bb-reorder.c index b6985d401e2..84191e4a6f5 100644 --- a/gcc/bb-reorder.c +++ b/gcc/bb-reorder.c @@ -99,6 +99,7 @@ #include "tm_p.h" #include "obstack.h" #include "expr.h" +#include "optabs.h" #include "params.h" #include "diagnostic-core.h" #include "toplev.h" /* user_defined_section_attribute */ diff --git a/gcc/builtins.c b/gcc/builtins.c index ad3a84e1b76..161fe8c7b3b 100644 --- a/gcc/builtins.c +++ b/gcc/builtins.c @@ -49,6 +49,7 @@ along with GCC; see the file COPYING3. If not see #include "except.h" #include "insn-config.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "recog.h" diff --git a/gcc/calls.c b/gcc/calls.c index 861c6158c90..c62dba0cf7b 100644 --- a/gcc/calls.c +++ b/gcc/calls.c @@ -43,6 +43,7 @@ along with GCC; see the file COPYING3. If not see #include "gimple.h" #include "flags.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "regs.h" diff --git a/gcc/cfgexpand.c b/gcc/cfgexpand.c index 05827690ab4..d338a7c3757 100644 --- a/gcc/cfgexpand.c +++ b/gcc/cfgexpand.c @@ -44,6 +44,8 @@ along with GCC; see the file COPYING3. If not see #include "cfgbuild.h" #include "cfgcleanup.h" #include "basic-block.h" +#include "insn-codes.h" +#include "optabs.h" #include "expr.h" #include "langhooks.h" #include "bitmap.h" diff --git a/gcc/cilk-common.c b/gcc/cilk-common.c index 35c47e19cd7..48c8aa63388 100644 --- a/gcc/cilk-common.c +++ b/gcc/cilk-common.c @@ -28,6 +28,7 @@ along with GCC; see the file COPYING3. If not see #include "stor-layout.h" #include "langhooks.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "recog.h" #include "tree-iterator.h" diff --git a/gcc/combine.c b/gcc/combine.c index 6d711ebb3f5..40f2875d518 100644 --- a/gcc/combine.c +++ b/gcc/combine.c @@ -105,8 +105,8 @@ along with GCC; see the file COPYING3. If not see #include "recog.h" #include "diagnostic-core.h" #include "target.h" -#include "optabs.h" #include "insn-codes.h" +#include "optabs.h" #include "rtlhooks-def.h" #include "params.h" #include "tree-pass.h" diff --git a/gcc/config/aarch64/aarch64-builtins.c b/gcc/config/aarch64/aarch64-builtins.c index df65c85fff9..527445c5c77 100644 --- a/gcc/config/aarch64/aarch64-builtins.c +++ b/gcc/config/aarch64/aarch64-builtins.c @@ -32,6 +32,7 @@ #include "recog.h" #include "langhooks.h" #include "diagnostic-core.h" +#include "insn-codes.h" #include "optabs.h" #include "hash-table.h" #include "vec.h" diff --git a/gcc/config/alpha/alpha.c b/gcc/config/alpha/alpha.c index 0c71965a2de..3fe8131a992 100644 --- a/gcc/config/alpha/alpha.c +++ b/gcc/config/alpha/alpha.c @@ -37,6 +37,7 @@ along with GCC; see the file COPYING3. If not see #include "flags.h" #include "recog.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "reload.h" #include "obstack.h" diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c index f4c4ebd4a29..4f047076f83 100644 --- a/gcc/config/arm/arm.c +++ b/gcc/config/arm/arm.c @@ -47,6 +47,7 @@ #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "diagnostic-core.h" #include "recog.h" diff --git a/gcc/config/cris/cris.c b/gcc/config/cris/cris.c index bb2578cf376..1983ae0299c 100644 --- a/gcc/config/cris/cris.c +++ b/gcc/config/cris/cris.c @@ -52,6 +52,7 @@ along with GCC; see the file COPYING3. If not see #include "target.h" #include "target-def.h" #include "ggc.h" +#include "insn-codes.h" #include "optabs.h" #include "dominance.h" #include "cfg.h" diff --git a/gcc/config/epiphany/epiphany.c b/gcc/config/epiphany/epiphany.c index ec5779764fc..3890149f1e3 100644 --- a/gcc/config/epiphany/epiphany.c +++ b/gcc/config/epiphany/epiphany.c @@ -42,6 +42,8 @@ along with GCC; see the file COPYING3. If not see #include "machmode.h" #include "input.h" #include "function.h" +#include "insn-codes.h" +#include "optabs.h" #include "expr.h" #include "diagnostic-core.h" #include "recog.h" diff --git a/gcc/config/frv/frv.c b/gcc/config/frv/frv.c index 41cc4974cad..16e0bb5e377 100644 --- a/gcc/config/frv/frv.c +++ b/gcc/config/frv/frv.c @@ -45,6 +45,7 @@ along with GCC; see the file COPYING3. If not see #include "machmode.h" #include "input.h" #include "function.h" +#include "insn-codes.h" #include "optabs.h" #include "diagnostic-core.h" #include "predict.h" diff --git a/gcc/config/h8300/h8300.c b/gcc/config/h8300/h8300.c index 7f5ef5b2c28..c9494260360 100644 --- a/gcc/config/h8300/h8300.c +++ b/gcc/config/h8300/h8300.c @@ -44,6 +44,7 @@ along with GCC; see the file COPYING3. If not see #include "machmode.h" #include "input.h" #include "function.h" +#include "insn-codes.h" #include "optabs.h" #include "diagnostic-core.h" #include "c-family/c-pragma.h" /* ??? */ diff --git a/gcc/config/ia64/ia64.c b/gcc/config/ia64/ia64.c index beb9e606c05..f896e101c6b 100644 --- a/gcc/config/ia64/ia64.c +++ b/gcc/config/ia64/ia64.c @@ -38,6 +38,7 @@ along with GCC; see the file COPYING3. If not see #include "flags.h" #include "recog.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "except.h" #include "hashtab.h" diff --git a/gcc/config/iq2000/iq2000.c b/gcc/config/iq2000/iq2000.c index 9f45b1d3683..161eaf639c0 100644 --- a/gcc/config/iq2000/iq2000.c +++ b/gcc/config/iq2000/iq2000.c @@ -40,6 +40,7 @@ along with GCC; see the file COPYING3. If not see #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "recog.h" diff --git a/gcc/config/m32c/m32c.c b/gcc/config/m32c/m32c.c index 132873f6550..6197b33e20d 100644 --- a/gcc/config/m32c/m32c.c +++ b/gcc/config/m32c/m32c.c @@ -40,6 +40,7 @@ #include "varasm.h" #include "calls.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "except.h" #include "hashtab.h" diff --git a/gcc/config/mep/mep.c b/gcc/config/mep/mep.c index 46a451c58a8..2a6b91531a0 100644 --- a/gcc/config/mep/mep.c +++ b/gcc/config/mep/mep.c @@ -47,6 +47,7 @@ along with GCC; see the file COPYING3. If not see #include "machmode.h" #include "input.h" #include "function.h" +#include "insn-codes.h" #include "optabs.h" #include "reload.h" #include "tm_p.h" diff --git a/gcc/config/microblaze/microblaze.c b/gcc/config/microblaze/microblaze.c index 48ebf861c5a..7a44396def6 100644 --- a/gcc/config/microblaze/microblaze.c +++ b/gcc/config/microblaze/microblaze.c @@ -61,6 +61,7 @@ #include "predict.h" #include "basic-block.h" #include "df.h" +#include "insn-codes.h" #include "optabs.h" #include "diagnostic-core.h" #include "hash-map.h" diff --git a/gcc/config/mips/mips.c b/gcc/config/mips/mips.c index ac7746c372e..0498e4f2cd4 100644 --- a/gcc/config/mips/mips.c +++ b/gcc/config/mips/mips.c @@ -45,6 +45,7 @@ along with GCC; see the file COPYING3. If not see #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "flags.h" diff --git a/gcc/config/mn10300/mn10300.c b/gcc/config/mn10300/mn10300.c index 3f9a7becda6..20330f04305 100644 --- a/gcc/config/mn10300/mn10300.c +++ b/gcc/config/mn10300/mn10300.c @@ -37,6 +37,7 @@ #include "recog.h" #include "reload.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "hashtab.h" #include "hash-set.h" diff --git a/gcc/config/moxie/moxie.c b/gcc/config/moxie/moxie.c index ef1ed8fb2cc..d4688d9c2f8 100644 --- a/gcc/config/moxie/moxie.c +++ b/gcc/config/moxie/moxie.c @@ -40,6 +40,7 @@ #include "varasm.h" #include "calls.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "except.h" #include "hashtab.h" diff --git a/gcc/config/msp430/msp430.c b/gcc/config/msp430/msp430.c index 703bf9b7ca5..fe97f270090 100644 --- a/gcc/config/msp430/msp430.c +++ b/gcc/config/msp430/msp430.c @@ -40,6 +40,7 @@ #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "recog.h" diff --git a/gcc/config/nios2/nios2.c b/gcc/config/nios2/nios2.c index 03451fe83c3..982112e0631 100644 --- a/gcc/config/nios2/nios2.c +++ b/gcc/config/nios2/nios2.c @@ -35,6 +35,7 @@ #include "flags.h" #include "recog.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "hashtab.h" #include "hash-set.h" diff --git a/gcc/config/pa/pa.c b/gcc/config/pa/pa.c index 6e34d778981..35498357d2d 100644 --- a/gcc/config/pa/pa.c +++ b/gcc/config/pa/pa.c @@ -38,6 +38,7 @@ along with GCC; see the file COPYING3. If not see #include "dbxout.h" #include "except.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "reload.h" #include "hashtab.h" diff --git a/gcc/config/rl78/rl78.c b/gcc/config/rl78/rl78.c index 9e7c6280d7c..7b85cf83d9d 100644 --- a/gcc/config/rl78/rl78.c +++ b/gcc/config/rl78/rl78.c @@ -41,6 +41,7 @@ #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "recog.h" diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c index 4adb168dda9..05325c24d6d 100644 --- a/gcc/config/rs6000/rs6000.c +++ b/gcc/config/rs6000/rs6000.c @@ -38,6 +38,7 @@ #include "print-tree.h" #include "varasm.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "except.h" #include "hashtab.h" diff --git a/gcc/config/rx/rx.c b/gcc/config/rx/rx.c index 0aeb611d97b..f3e1129c253 100644 --- a/gcc/config/rx/rx.c +++ b/gcc/config/rx/rx.c @@ -45,6 +45,7 @@ #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "recog.h" diff --git a/gcc/config/s390/s390.c b/gcc/config/s390/s390.c index 51ae90c97cc..31527624be4 100644 --- a/gcc/config/s390/s390.c +++ b/gcc/config/s390/s390.c @@ -64,6 +64,7 @@ along with GCC; see the file COPYING3. If not see #include "target-def.h" #include "debug.h" #include "langhooks.h" +#include "insn-codes.h" #include "optabs.h" #include "hash-table.h" #include "tree-ssa-alias.h" diff --git a/gcc/config/sh/sh.c b/gcc/config/sh/sh.c index 3bbbd230406..3a4f5e9aeea 100644 --- a/gcc/config/sh/sh.c +++ b/gcc/config/sh/sh.c @@ -36,6 +36,7 @@ along with GCC; see the file COPYING3. If not see #include "varasm.h" #include "flags.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "reload.h" #include "hashtab.h" diff --git a/gcc/config/sh/sh_treg_combine.cc b/gcc/config/sh/sh_treg_combine.cc index 72ec577ec30..4615a2843ff 100644 --- a/gcc/config/sh/sh_treg_combine.cc +++ b/gcc/config/sh/sh_treg_combine.cc @@ -46,6 +46,8 @@ along with GCC; see the file COPYING3. If not see #include "recog.h" #include "tree-pass.h" #include "target.h" +#include "tree-core.h" +#include "optabs.h" #include "expr.h" #include <algorithm> diff --git a/gcc/config/spu/spu.c b/gcc/config/spu/spu.c index eef42f0970c..2009085cdc5 100644 --- a/gcc/config/spu/spu.c +++ b/gcc/config/spu/spu.c @@ -33,6 +33,7 @@ #include "calls.h" #include "varasm.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "except.h" #include "hashtab.h" diff --git a/gcc/config/stormy16/stormy16.c b/gcc/config/stormy16/stormy16.c index 52d02392f28..7be72b92577 100644 --- a/gcc/config/stormy16/stormy16.c +++ b/gcc/config/stormy16/stormy16.c @@ -40,6 +40,7 @@ #include "varasm.h" #include "calls.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "except.h" #include "hashtab.h" diff --git a/gcc/config/tilegx/mul-tables.c b/gcc/config/tilegx/mul-tables.c index 4bcff30aea8..a902299d817 100644 --- a/gcc/config/tilegx/mul-tables.c +++ b/gcc/config/tilegx/mul-tables.c @@ -22,6 +22,7 @@ #include "system.h" #include "coretypes.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "tilegx-multiply.h" diff --git a/gcc/config/tilegx/tilegx.c b/gcc/config/tilegx/tilegx.c index e807ffffb05..0090d903528 100644 --- a/gcc/config/tilegx/tilegx.c +++ b/gcc/config/tilegx/tilegx.c @@ -30,6 +30,7 @@ #include "recog.h" #include "expr.h" #include "langhooks.h" +#include "insn-codes.h" #include "optabs.h" #include "dominance.h" #include "cfg.h" diff --git a/gcc/config/tilepro/mul-tables.c b/gcc/config/tilepro/mul-tables.c index 4411b6eff0a..c8eda94e7c1 100644 --- a/gcc/config/tilepro/mul-tables.c +++ b/gcc/config/tilepro/mul-tables.c @@ -22,6 +22,7 @@ #include "system.h" #include "coretypes.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "tilepro-multiply.h" diff --git a/gcc/config/tilepro/tilepro.c b/gcc/config/tilepro/tilepro.c index 9fdfb42dab0..4eef51a5c86 100644 --- a/gcc/config/tilepro/tilepro.c +++ b/gcc/config/tilepro/tilepro.c @@ -30,6 +30,7 @@ #include "recog.h" #include "expr.h" #include "langhooks.h" +#include "insn-codes.h" #include "optabs.h" #include "dominance.h" #include "cfg.h" diff --git a/gcc/config/vax/vax.c b/gcc/config/vax/vax.c index bf12f89a86d..949a2d232f9 100644 --- a/gcc/config/vax/vax.c +++ b/gcc/config/vax/vax.c @@ -49,6 +49,7 @@ along with GCC; see the file COPYING3. If not see #include "insn-attr.h" #include "recog.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "flags.h" #include "debug.h" diff --git a/gcc/dojump.c b/gcc/dojump.c index 4040a6d4c3a..40b1bf412ea 100644 --- a/gcc/dojump.c +++ b/gcc/dojump.c @@ -36,6 +36,7 @@ along with GCC; see the file COPYING3. If not see #include "insn-attr.h" /* Include expr.h after insn-config.h so we get HAVE_conditional_move. */ #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "langhooks.h" #include "ggc.h" diff --git a/gcc/dse.c b/gcc/dse.c index 9a8f3cf0328..2555bd1d5a9 100644 --- a/gcc/dse.c +++ b/gcc/dse.c @@ -48,6 +48,7 @@ along with GCC; see the file COPYING3. If not see #include "insn-config.h" #include "expr.h" #include "recog.h" +#include "insn-codes.h" #include "optabs.h" #include "dbgcnt.h" #include "target.h" diff --git a/gcc/except.c b/gcc/except.c index 39bede08020..6288eb00fc2 100644 --- a/gcc/except.c +++ b/gcc/except.c @@ -125,6 +125,8 @@ along with GCC; see the file COPYING3. If not see #include "hard-reg-set.h" #include "input.h" #include "function.h" +#include "insn-codes.h" +#include "optabs.h" #include "expr.h" #include "libfuncs.h" #include "insn-config.h" diff --git a/gcc/explow.c b/gcc/explow.c index 19024b571ab..44a1223b131 100644 --- a/gcc/explow.c +++ b/gcc/explow.c @@ -37,6 +37,7 @@ along with GCC; see the file COPYING3. If not see #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "insn-config.h" diff --git a/gcc/expmed.c b/gcc/expmed.c index 7dabe75c8f4..af14b990794 100644 --- a/gcc/expmed.c +++ b/gcc/expmed.c @@ -31,6 +31,7 @@ along with GCC; see the file COPYING3. If not see #include "flags.h" #include "insn-config.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "recog.h" #include "langhooks.h" diff --git a/gcc/expr.c b/gcc/expr.c index af42b616881..f4047c418cd 100644 --- a/gcc/expr.c +++ b/gcc/expr.c @@ -41,6 +41,7 @@ along with GCC; see the file COPYING3. If not see #include "insn-attr.h" /* Include expr.h after insn-config.h so we get HAVE_conditional_move. */ #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "recog.h" @@ -3628,6 +3629,21 @@ emit_move_insn (rtx x, rtx y) return last_insn; } +/* Generate the body of an instruction to copy Y into X. + It may be a list of insns, if one insn isn't enough. */ + +rtx +gen_move_insn (rtx x, rtx y) +{ + rtx_insn *seq; + + start_sequence (); + emit_move_insn_1 (x, y); + seq = get_insns (); + end_sequence (); + return seq; +} + /* If Y is representable exactly in a narrower mode, and the target can perform the extension directly from constant or memory, then emit the move as an extension. */ diff --git a/gcc/expr.h b/gcc/expr.h index ba93693cda4..5793560dd71 100644 --- a/gcc/expr.h +++ b/gcc/expr.h @@ -37,6 +37,7 @@ along with GCC; see the file COPYING3. If not see ssize_int, TREE_CODE, TYPE_SIZE, int_size_in_bytes, */ #include "tree-core.h" /* For GET_MODE_BITSIZE, word_mode */ +#include "insn-config.h" /* This is the 4th arg to `expand_expr'. EXPAND_STACK_PARM means we are possibly expanding a call param onto @@ -72,93 +73,6 @@ typedef struct separate_ops tree op0, op1, op2; } *sepops; -/* Functions from optabs.c, commonly used, and without need for the optabs - tables: */ - -/* Passed to expand_simple_binop and expand_binop to say which options - to try to use if the requested operation can't be open-coded on the - requisite mode. Either OPTAB_LIB or OPTAB_LIB_WIDEN says try using - a library call. Either OPTAB_WIDEN or OPTAB_LIB_WIDEN says try - using a wider mode. OPTAB_MUST_WIDEN says try widening and don't - try anything else. */ - -enum optab_methods -{ - OPTAB_DIRECT, - OPTAB_LIB, - OPTAB_WIDEN, - OPTAB_LIB_WIDEN, - OPTAB_MUST_WIDEN -}; - -/* Generate code for a simple binary or unary operation. "Simple" in - this case means "can be unambiguously described by a (mode, code) - pair and mapped to a single optab." */ -extern rtx expand_simple_binop (machine_mode, enum rtx_code, rtx, - rtx, rtx, int, enum optab_methods); -extern rtx expand_simple_unop (machine_mode, enum rtx_code, rtx, rtx, - int); - -/* Report whether the machine description contains an insn which can - perform the operation described by CODE and MODE. */ -extern int have_insn_for (enum rtx_code, machine_mode); - -/* Emit code to make a call to a constant function or a library call. */ -extern void emit_libcall_block (rtx, rtx, rtx, rtx); - -/* Create but don't emit one rtl instruction to perform certain operations. - Modes must match; operands must meet the operation's predicates. - Likewise for subtraction and for just copying. */ -extern rtx gen_add2_insn (rtx, rtx); -extern rtx gen_add3_insn (rtx, rtx, rtx); -extern rtx gen_addptr3_insn (rtx, rtx, rtx); -extern rtx gen_sub2_insn (rtx, rtx); -extern rtx gen_sub3_insn (rtx, rtx, rtx); -extern rtx gen_move_insn (rtx, rtx); -extern int have_add2_insn (rtx, rtx); -extern int have_addptr3_insn (rtx, rtx, rtx); -extern int have_sub2_insn (rtx, rtx); - -/* Emit a pair of rtl insns to compare two rtx's and to jump - to a label if the comparison is true. */ -extern void emit_cmp_and_jump_insns (rtx, rtx, enum rtx_code, rtx, - machine_mode, int, rtx, int prob=-1); - -/* Generate code to indirectly jump to a location given in the rtx LOC. */ -extern void emit_indirect_jump (rtx); - -/* Generate a conditional trap instruction. */ -extern rtx gen_cond_trap (enum rtx_code, rtx, rtx, rtx); - -#include "insn-config.h" - -#ifdef HAVE_conditional_move -/* Emit a conditional move operation. */ -rtx emit_conditional_move (rtx, enum rtx_code, rtx, rtx, machine_mode, - rtx, rtx, machine_mode, int); - -/* Return nonzero if the conditional move is supported. */ -int can_conditionally_move_p (machine_mode mode); - -#endif -rtx emit_conditional_add (rtx, enum rtx_code, rtx, rtx, machine_mode, - rtx, rtx, machine_mode, int); - -rtx expand_sync_operation (rtx, rtx, enum rtx_code); -rtx expand_sync_fetch_operation (rtx, rtx, enum rtx_code, bool, rtx); -rtx expand_sync_lock_test_and_set (rtx, rtx, rtx); - -rtx expand_atomic_exchange (rtx, rtx, rtx, enum memmodel); -rtx expand_atomic_load (rtx, rtx, enum memmodel); -rtx expand_atomic_store (rtx, rtx, enum memmodel, bool); -rtx expand_atomic_fetch_op (rtx, rtx, rtx, enum rtx_code, enum memmodel, - bool); -rtx expand_atomic_test_and_set (rtx, rtx, enum memmodel); -rtx expand_atomic_clear (rtx, enum memmodel); -void expand_atomic_thread_fence (enum memmodel); -void expand_atomic_signal_fence (enum memmodel); - - /* Functions from expmed.c: */ /* Arguments MODE, RTX: return an rtx for the negation of that value. @@ -334,6 +248,7 @@ extern rtx store_by_pieces (rtx, unsigned HOST_WIDE_INT, /* Emit insns to set X from Y. */ extern rtx_insn *emit_move_insn (rtx, rtx); +extern rtx gen_move_insn (rtx, rtx); /* Emit insns to set X from Y, with no frills. */ extern rtx_insn *emit_move_insn_1 (rtx, rtx); @@ -671,18 +586,6 @@ extern int safe_from_p (const_rtx, tree, int); extern bool split_comparison (enum rtx_code, machine_mode, enum rtx_code *, enum rtx_code *); -/* Call this once to initialize the contents of the optabs - appropriately for the current target machine. */ -extern void init_optabs (void); -extern void init_all_optabs (struct target_optabs *); - -/* Call this to initialize an optab function entry. */ -extern rtx init_one_libfunc (const char *); -extern rtx set_user_assembler_libfunc (const char *, const char *); - -/* Build a decl for a libfunc named NAME. */ -extern tree build_libfunc_function (const char *); - /* Get the personality libfunc for a function decl. */ rtx get_personality_function (tree); diff --git a/gcc/function.c b/gcc/function.c index 1ef43c4dea7..6d0998228d1 100644 --- a/gcc/function.c +++ b/gcc/function.c @@ -50,6 +50,7 @@ along with GCC; see the file COPYING3. If not see #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "regs.h" diff --git a/gcc/genemit.c b/gcc/genemit.c index 9dc2d0bcd14..5f30f4223af 100644 --- a/gcc/genemit.c +++ b/gcc/genemit.c @@ -809,6 +809,7 @@ from the machine description file `md'. */\n\n"); printf ("#include \"input.h\"\n"); printf ("#include \"function.h\"\n"); printf ("#include \"expr.h\"\n"); + printf ("#include \"insn-codes.h\"\n"); printf ("#include \"optabs.h\"\n"); printf ("#include \"dfp.h\"\n"); printf ("#include \"flags.h\"\n"); diff --git a/gcc/gengtype.c b/gcc/gengtype.c index d55d53041f6..fac83ee84d2 100644 --- a/gcc/gengtype.c +++ b/gcc/gengtype.c @@ -1826,7 +1826,7 @@ open_base_files (void) { /* The order of files here matters very much. */ static const char *const ifiles[] = { - "config.h", "system.h", "coretypes.h", "tm.h", + "config.h", "system.h", "coretypes.h", "tm.h", "insn-codes.h", "hashtab.h", "splay-tree.h", "obstack.h", "bitmap.h", "input.h", "tree.h", "rtl.h", "wide-int.h", "hashtab.h", "hash-set.h", "vec.h", "machmode.h", "tm.h", "hard-reg-set.h", "input.h", "predict.h", diff --git a/gcc/genopinit.c b/gcc/genopinit.c index b8a282779de..2d14d125211 100644 --- a/gcc/genopinit.c +++ b/gcc/genopinit.c @@ -398,6 +398,68 @@ main (int argc, char **argv) fprintf (h_file, "#define NUM_OPTAB_PATTERNS %u\n", (unsigned) patterns.length ()); + fprintf (h_file, + "typedef enum optab_tag optab;\n" + "typedef enum optab_tag convert_optab;\n" + "typedef enum optab_tag direct_optab;\n" + "\n" + "struct optab_libcall_d\n" + "{\n" + " char libcall_suffix;\n" + " const char *libcall_basename;\n" + " void (*libcall_gen) (optab, const char *name,\n" + " char suffix, machine_mode);\n" + "};\n" + "\n" + "struct convert_optab_libcall_d\n" + "{\n" + " const char *libcall_basename;\n" + " void (*libcall_gen) (convert_optab, const char *name,\n" + " machine_mode, machine_mode);\n" + "};\n" + "\n" + "/* Given an enum insn_code, access the function to construct\n" + " the body of that kind of insn. */\n" + "#define GEN_FCN(CODE) (insn_data[CODE].genfun)\n" + "\n" + "/* Contains the optab used for each rtx code, and vice-versa. */\n" + "extern const optab code_to_optab_[NUM_RTX_CODE];\n" + "extern const enum rtx_code optab_to_code_[NUM_OPTABS];\n" + "\n" + "static inline optab\n" + "code_to_optab (enum rtx_code code)\n" + "{\n" + " return code_to_optab_[code];\n" + "}\n" + "\n" + "static inline enum rtx_code\n" + "optab_to_code (optab op)\n" + "{\n" + " return optab_to_code_[op];\n" + "}\n" + "\n" + "extern const struct convert_optab_libcall_d convlib_def[NUM_CONVLIB_OPTABS];\n" + "extern const struct optab_libcall_d normlib_def[NUM_NORMLIB_OPTABS];\n" + "\n" + "/* Returns the active icode for the given (encoded) optab. */\n" + "extern enum insn_code raw_optab_handler (unsigned);\n" + "extern bool swap_optab_enable (optab, machine_mode, bool);\n" + "\n" + "/* Target-dependent globals. */\n" + "struct target_optabs {\n" + " /* Patterns that are used by optabs that are enabled for this target. */\n" + " bool pat_enable[NUM_OPTAB_PATTERNS];\n" + "};\n" + "extern void init_all_optabs (struct target_optabs *);\n" + "\n" + "extern struct target_optabs default_target_optabs;\n" + "extern struct target_optabs *this_fn_optabs;\n" + "#if SWITCHABLE_TARGET\n" + "extern struct target_optabs *this_target_optabs;\n" + "#else\n" + "#define this_target_optabs (&default_target_optabs)\n" + "#endif\n"); + fprintf (s_file, "#include \"config.h\"\n" "#include \"system.h\"\n" @@ -413,6 +475,7 @@ main (int argc, char **argv) "#include \"flags.h\"\n" "#include \"insn-config.h\"\n" "#include \"expr.h\"\n" + "#include \"insn-codes.h\"\n" "#include \"optabs.h\"\n" "\n" "struct optab_pat {\n" diff --git a/gcc/ifcvt.c b/gcc/ifcvt.c index 8cf0a95c2ae..772b1841584 100644 --- a/gcc/ifcvt.c +++ b/gcc/ifcvt.c @@ -44,6 +44,7 @@ #include "basic-block.h" #include "expr.h" #include "output.h" +#include "insn-codes.h" #include "optabs.h" #include "diagnostic-core.h" #include "tm_p.h" diff --git a/gcc/internal-fn.c b/gcc/internal-fn.c index b32ce962c1c..04f8b6415fb 100644 --- a/gcc/internal-fn.c +++ b/gcc/internal-fn.c @@ -24,6 +24,7 @@ along with GCC; see the file COPYING3. If not see #include "internal-fn.h" #include "stor-layout.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "predict.h" #include "vec.h" diff --git a/gcc/loop-unroll.c b/gcc/loop-unroll.c index ec33f7495ab..c4c6b0d9768 100644 --- a/gcc/loop-unroll.c +++ b/gcc/loop-unroll.c @@ -39,6 +39,8 @@ along with GCC; see the file COPYING3. If not see #include "basic-block.h" #include "cfgloop.h" #include "params.h" +#include "insn-codes.h" +#include "optabs.h" #include "expr.h" #include "hash-table.h" #include "recog.h" diff --git a/gcc/lra.c b/gcc/lra.c index c2c0fc3aad2..ee390db0b06 100644 --- a/gcc/lra.c +++ b/gcc/lra.c @@ -112,6 +112,8 @@ along with GCC; see the file COPYING3. If not see #include "machmode.h" #include "input.h" #include "function.h" +#include "tree-core.h" +#include "optabs.h" #include "expr.h" #include "predict.h" #include "dominance.h" diff --git a/gcc/modulo-sched.c b/gcc/modulo-sched.c index eba910254d0..8abb8ee7553 100644 --- a/gcc/modulo-sched.c +++ b/gcc/modulo-sched.c @@ -48,6 +48,9 @@ along with GCC; see the file COPYING3. If not see #include "sched-int.h" #include "target.h" #include "cfgloop.h" +#include "tree-core.h" +#include "insn-codes.h" +#include "optabs.h" #include "expr.h" #include "params.h" #include "gcov-io.h" diff --git a/gcc/omp-low.c b/gcc/omp-low.c index 91f8e8f5b1d..b59d069ac14 100644 --- a/gcc/omp-low.c +++ b/gcc/omp-low.c @@ -73,6 +73,7 @@ along with GCC; see the file COPYING3. If not see #include "tree-pass.h" #include "except.h" #include "splay-tree.h" +#include "insn-codes.h" #include "optabs.h" #include "cfgloop.h" #include "target.h" diff --git a/gcc/optabs.c b/gcc/optabs.c index a9a546ee8a9..7e64eacc6f7 100644 --- a/gcc/optabs.c +++ b/gcc/optabs.c @@ -44,6 +44,7 @@ along with GCC; see the file COPYING3. If not see #include "function.h" #include "except.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "recog.h" @@ -4894,21 +4895,6 @@ have_sub2_insn (rtx x, rtx y) return 1; } - -/* Generate the body of an instruction to copy Y into X. - It may be a list of insns, if one insn isn't enough. */ - -rtx -gen_move_insn (rtx x, rtx y) -{ - rtx_insn *seq; - - start_sequence (); - emit_move_insn_1 (x, y); - seq = get_insns (); - end_sequence (); - return seq; -} /* Return the insn code used to extend FROM_MODE to TO_MODE. UNSIGNEDP specifies zero-extension instead of sign-extension. If diff --git a/gcc/optabs.h b/gcc/optabs.h index 1ed795711df..91e36d61b3b 100644 --- a/gcc/optabs.h +++ b/gcc/optabs.h @@ -20,244 +20,11 @@ along with GCC; see the file COPYING3. If not see #ifndef GCC_OPTABS_H #define GCC_OPTABS_H -#include "insn-codes.h" #include "insn-opinit.h" -typedef enum optab_tag optab; -typedef enum optab_tag convert_optab; -typedef enum optab_tag direct_optab; - -struct optab_libcall_d -{ - char libcall_suffix; - const char *libcall_basename; - void (*libcall_gen) (optab, const char *name, - char suffix, machine_mode); -}; - -struct convert_optab_libcall_d -{ - const char *libcall_basename; - void (*libcall_gen) (convert_optab, const char *name, - machine_mode, machine_mode); -}; - -/* Given an enum insn_code, access the function to construct - the body of that kind of insn. */ -#define GEN_FCN(CODE) (insn_data[CODE].genfun) - -/* Contains the optab used for each rtx code, and vice-versa. */ -extern const optab code_to_optab_[NUM_RTX_CODE]; -extern const enum rtx_code optab_to_code_[NUM_OPTABS]; - -static inline optab -code_to_optab (enum rtx_code code) -{ - return code_to_optab_[code]; -} - -static inline enum rtx_code -optab_to_code (optab op) -{ - return optab_to_code_[op]; -} - -extern const struct convert_optab_libcall_d convlib_def[NUM_CONVLIB_OPTABS]; -extern const struct optab_libcall_d normlib_def[NUM_NORMLIB_OPTABS]; - -/* Returns the active icode for the given (encoded) optab. */ -extern enum insn_code raw_optab_handler (unsigned); -extern bool swap_optab_enable (optab, machine_mode, bool); - -/* Target-dependent globals. */ -struct target_optabs { - /* Patterns that are used by optabs that are enabled for this target. */ - bool pat_enable[NUM_OPTAB_PATTERNS]; -}; - -extern struct target_optabs default_target_optabs; -extern struct target_optabs *this_fn_optabs; -#if SWITCHABLE_TARGET -extern struct target_optabs *this_target_optabs; -#else -#define this_target_optabs (&default_target_optabs) -#endif - -/* Define functions given in optabs.c. */ - -extern rtx expand_widen_pattern_expr (sepops ops, rtx op0, rtx op1, rtx wide_op, - rtx target, int unsignedp); - -extern rtx expand_ternary_op (machine_mode mode, optab ternary_optab, - rtx op0, rtx op1, rtx op2, rtx target, - int unsignedp); - -/* Expand a binary operation given optab and rtx operands. */ -extern rtx expand_binop (machine_mode, optab, rtx, rtx, rtx, int, - enum optab_methods); - -extern rtx simplify_expand_binop (machine_mode mode, optab binoptab, - rtx op0, rtx op1, rtx target, int unsignedp, - enum optab_methods methods); - -extern bool force_expand_binop (machine_mode, optab, rtx, rtx, rtx, int, - enum optab_methods); - -/* Expand a binary operation with both signed and unsigned forms. */ -extern rtx sign_expand_binop (machine_mode, optab, optab, rtx, rtx, - rtx, int, enum optab_methods); - -/* Generate code to perform an operation on one operand with two results. */ -extern int expand_twoval_unop (optab, rtx, rtx, rtx, int); - -/* Generate code to perform an operation on two operands with two results. */ -extern int expand_twoval_binop (optab, rtx, rtx, rtx, rtx, int); - -/* Generate code to perform an operation on two operands with two - results, using a library function. */ -extern bool expand_twoval_binop_libfunc (optab, rtx, rtx, rtx, rtx, - enum rtx_code); - -/* Expand a unary arithmetic operation given optab rtx operand. */ -extern rtx expand_unop (machine_mode, optab, rtx, rtx, int); - -/* Expand the absolute value operation. */ -extern rtx expand_abs_nojump (machine_mode, rtx, rtx, int); -extern rtx expand_abs (machine_mode, rtx, rtx, int, int); - -/* Expand the one's complement absolute value operation. */ -extern rtx expand_one_cmpl_abs_nojump (machine_mode, rtx, rtx); - -/* Expand the copysign operation. */ -extern rtx expand_copysign (rtx, rtx, rtx); - -/* Generate an instruction with a given INSN_CODE with an output and - an input. */ -extern void emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code); -extern bool maybe_emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code); - -/* Find a widening optab even if it doesn't widen as much as we want. */ -#define find_widening_optab_handler(A,B,C,D) \ - find_widening_optab_handler_and_mode (A, B, C, D, NULL) -extern enum insn_code find_widening_optab_handler_and_mode (optab, - machine_mode, - machine_mode, - int, - machine_mode *); -extern enum insn_code widening_optab_handler (optab, machine_mode, - machine_mode); - -/* An extra flag to control optab_for_tree_code's behavior. This is needed to - distinguish between machines with a vector shift that takes a scalar for the - shift amount vs. machines that take a vector for the shift amount. */ -enum optab_subtype -{ - optab_default, - optab_scalar, - optab_vector -}; - -/* Return the optab used for computing the given operation on the type given by - the second argument. The third argument distinguishes between the types of - vector shifts and rotates */ -extern optab optab_for_tree_code (enum tree_code, const_tree, enum optab_subtype); - -/* Given an optab that reduces a vector to a scalar, find instead the old - optab that produces a vector with the reduction result in one element, - for a tree with the specified type. */ -extern optab scalar_reduc_to_vector (optab, const_tree type); - -/* The various uses that a comparison can have; used by can_compare_p: - jumps, conditional moves, store flag operations. */ -enum can_compare_purpose -{ - ccp_jump, - ccp_cmov, - ccp_store_flag -}; - -/* Nonzero if a compare of mode MODE can be done straightforwardly - (without splitting it into pieces). */ -extern int can_compare_p (enum rtx_code, machine_mode, - enum can_compare_purpose); - -/* Return the INSN_CODE to use for an extend operation. */ -extern enum insn_code can_extend_p (machine_mode, machine_mode, int); - -/* Generate the body of an insn to extend Y (with mode MFROM) - into X (with mode MTO). Do zero-extension if UNSIGNEDP is nonzero. */ -extern rtx gen_extend_insn (rtx, rtx, machine_mode, - machine_mode, int); - -/* Call this to reset the function entry for one optab. */ -extern void set_optab_libfunc (optab, machine_mode, const char *); -extern void set_conv_libfunc (convert_optab, machine_mode, - machine_mode, const char *); - -/* Call this to install all of the __sync libcalls up to size MAX. */ -extern void init_sync_libfuncs (int max); - -/* Generate code for a FIXED_CONVERT_EXPR. */ -extern void expand_fixed_convert (rtx, rtx, int, int); - -/* Generate code for a FLOAT_EXPR. */ -extern void expand_float (rtx, rtx, int); - -/* Return the insn_code for a FLOAT_EXPR. */ -enum insn_code can_float_p (machine_mode, machine_mode, int); - -/* Return true if there is an inline compare and swap pattern. */ -extern bool can_compare_and_swap_p (machine_mode, bool); - -/* Return true if there is an inline atomic exchange pattern. */ -extern bool can_atomic_exchange_p (machine_mode, bool); - -/* Generate code for a compare and swap. */ -extern bool expand_atomic_compare_and_swap (rtx *, rtx *, rtx, rtx, rtx, bool, - enum memmodel, enum memmodel); - -/* Generate memory barriers. */ -extern void expand_mem_thread_fence (enum memmodel); -extern void expand_mem_signal_fence (enum memmodel); - -/* Check whether an operation represented by the code CODE is a - convert operation that is supported by the target platform in - vector form */ -bool supportable_convert_operation (enum tree_code, tree, tree, tree *, - enum tree_code *); - -/* Generate code for a FIX_EXPR. */ -extern void expand_fix (rtx, rtx, int); - -/* Generate code for float to integral conversion. */ -extern bool expand_sfix_optab (rtx, rtx, convert_optab); - /* Generate code for a widening multiply. */ extern rtx expand_widening_mult (machine_mode, rtx, rtx, rtx, int, optab); -/* Return tree if target supports vector operations for COND_EXPR. */ -bool expand_vec_cond_expr_p (tree, tree); - -/* Generate code for VEC_COND_EXPR. */ -extern rtx expand_vec_cond_expr (tree, tree, tree, tree, rtx); -/* Generate code for VEC_RSHIFT_EXPR. */ -extern rtx expand_vec_shift_expr (sepops, rtx); - -/* Return true if target supports vector operations for VEC_PERM_EXPR. */ -extern bool can_vec_perm_p (machine_mode, bool, const unsigned char *); - -/* Generate code for VEC_PERM_EXPR. */ -extern rtx expand_vec_perm (machine_mode, rtx, rtx, rtx, rtx); - -/* Return non-zero if target supports a given highpart multiplication. */ -extern int can_mult_highpart_p (machine_mode, bool); - -/* Generate code for MULT_HIGHPART_EXPR. */ -extern rtx expand_mult_highpart (machine_mode, rtx, rtx, rtx, bool); - -/* Return true if target supports vector masked load/store for mode. */ -extern bool can_vec_mask_load_store_p (machine_mode, bool); - /* Return the insn used to implement mode MODE of OP, or CODE_FOR_nothing if the target does not have such an insn. */ @@ -310,9 +77,7 @@ trapv_binoptab_p (optab binoptab) || binoptab == smulv_optab); } -extern rtx optab_libfunc (optab optab, machine_mode mode); -extern rtx convert_optab_libfunc (convert_optab optab, machine_mode mode1, - machine_mode mode2); + /* Describes an instruction that inserts or extracts a bitfield. */ struct extraction_insn @@ -333,21 +98,8 @@ struct extraction_insn machine_mode pos_mode; }; -/* Enumerates the possible extraction_insn operations. */ -enum extraction_pattern { EP_insv, EP_extv, EP_extzv }; - -extern bool get_best_reg_extraction_insn (extraction_insn *, - enum extraction_pattern, - unsigned HOST_WIDE_INT, - machine_mode); -extern bool get_best_mem_extraction_insn (extraction_insn *, - enum extraction_pattern, - HOST_WIDE_INT, HOST_WIDE_INT, - machine_mode); -extern bool insn_operand_matches (enum insn_code icode, unsigned int opno, - rtx operand); /* Describes the type of an expand_operand. Each value is associated with a create_*_operand function; see the comments above those @@ -452,8 +204,6 @@ create_convert_operand_from (struct expand_operand *op, rtx value, create_expand_operand (op, EXPAND_CONVERT_FROM, value, mode, unsigned_p); } -extern void create_convert_operand_from_type (struct expand_operand *op, - rtx value, tree type); /* Make OP describe an input Pmode address operand. VALUE is the value of the address, but it may need to be converted to Pmode first. */ @@ -476,24 +226,202 @@ create_integer_operand (struct expand_operand *op, HOST_WIDE_INT intval) create_expand_operand (op, EXPAND_INTEGER, GEN_INT (intval), VOIDmode, false); } -extern bool valid_multiword_target_p (rtx); -extern bool maybe_legitimize_operands (enum insn_code icode, - unsigned int opno, unsigned int nops, - struct expand_operand *ops); -extern rtx maybe_gen_insn (enum insn_code icode, unsigned int nops, - struct expand_operand *ops); -extern bool maybe_expand_insn (enum insn_code icode, unsigned int nops, - struct expand_operand *ops); -extern bool maybe_expand_jump_insn (enum insn_code icode, unsigned int nops, - struct expand_operand *ops); -extern void expand_insn (enum insn_code icode, unsigned int nops, - struct expand_operand *ops); -extern void expand_jump_insn (enum insn_code icode, unsigned int nops, - struct expand_operand *ops); +extern rtx convert_optab_libfunc (convert_optab optab, machine_mode mode1, + machine_mode mode2); +extern rtx optab_libfunc (optab optab, machine_mode mode); +extern enum insn_code widening_optab_handler (optab, machine_mode, + machine_mode); +/* Find a widening optab even if it doesn't widen as much as we want. */ +#define find_widening_optab_handler(A,B,C,D) \ + find_widening_optab_handler_and_mode (A, B, C, D, NULL) +extern enum insn_code find_widening_optab_handler_and_mode (optab, + machine_mode, + machine_mode, + int, + machine_mode *); + +/* An extra flag to control optab_for_tree_code's behavior. This is needed to + distinguish between machines with a vector shift that takes a scalar for the + shift amount vs. machines that take a vector for the shift amount. */ +enum optab_subtype +{ + optab_default, + optab_scalar, + optab_vector +}; + +/* Passed to expand_simple_binop and expand_binop to say which options + to try to use if the requested operation can't be open-coded on the + requisite mode. Either OPTAB_LIB or OPTAB_LIB_WIDEN says try using + a library call. Either OPTAB_WIDEN or OPTAB_LIB_WIDEN says try + using a wider mode. OPTAB_MUST_WIDEN says try widening and don't + try anything else. */ + +enum optab_methods +{ + OPTAB_DIRECT, + OPTAB_LIB, + OPTAB_WIDEN, + OPTAB_LIB_WIDEN, + OPTAB_MUST_WIDEN +}; + +/* Return the optab used for computing the given operation on the type given by + the second argument. The third argument distinguishes between the types of + vector shifts and rotates */ +extern optab optab_for_tree_code (enum tree_code, const_tree, enum optab_subtype); + +/* Given an optab that reduces a vector to a scalar, find instead the old + optab that produces a vector with the reduction result in one element, + for a tree with the specified type. */ +extern optab scalar_reduc_to_vector (optab, const_tree type); + +extern rtx expand_widen_pattern_expr (struct separate_ops *, rtx , rtx , rtx, + rtx, int); +extern rtx expand_ternary_op (machine_mode mode, optab ternary_optab, + rtx op0, rtx op1, rtx op2, rtx target, + int unsignedp); +extern rtx simplify_expand_binop (machine_mode mode, optab binoptab, + rtx op0, rtx op1, rtx target, int unsignedp, + enum optab_methods methods); +extern bool force_expand_binop (machine_mode, optab, rtx, rtx, rtx, int, + enum optab_methods); +/* Generate code for VEC_RSHIFT_EXPR. */ +extern rtx expand_vec_shift_expr (struct separate_ops *, rtx); + +/* Generate code for a simple binary or unary operation. "Simple" in + this case means "can be unambiguously described by a (mode, code) + pair and mapped to a single optab." */ +extern rtx expand_simple_binop (machine_mode, enum rtx_code, rtx, + rtx, rtx, int, enum optab_methods); + +/* Expand a binary operation given optab and rtx operands. */ +extern rtx expand_binop (machine_mode, optab, rtx, rtx, rtx, int, + enum optab_methods); +/* Expand a binary operation with both signed and unsigned forms. */ +extern rtx sign_expand_binop (machine_mode, optab, optab, rtx, rtx, + rtx, int, enum optab_methods); + +/* Generate code to perform an operation on one operand with two results. */ +extern int expand_twoval_unop (optab, rtx, rtx, rtx, int); + +/* Generate code to perform an operation on two operands with two results. */ +extern int expand_twoval_binop (optab, rtx, rtx, rtx, rtx, int); + +/* Generate code to perform an operation on two operands with two + results, using a library function. */ +extern bool expand_twoval_binop_libfunc (optab, rtx, rtx, rtx, rtx, + enum rtx_code); +extern rtx expand_simple_unop (machine_mode, enum rtx_code, rtx, rtx, + int); + +/* Expand a unary arithmetic operation given optab rtx operand. */ +extern rtx expand_unop (machine_mode, optab, rtx, rtx, int); + +/* Expand the absolute value operation. */ +extern rtx expand_abs_nojump (machine_mode, rtx, rtx, int); +extern rtx expand_abs (machine_mode, rtx, rtx, int, int); + +/* Expand the one's complement absolute value operation. */ +extern rtx expand_one_cmpl_abs_nojump (machine_mode, rtx, rtx); + +/* Expand the copysign operation. */ +extern rtx expand_copysign (rtx, rtx, rtx); +/* Generate an instruction with a given INSN_CODE with an output and + an input. */ +extern bool maybe_emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code); +extern void emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code); + +/* Emit code to make a call to a constant function or a library call. */ +extern void emit_libcall_block (rtx, rtx, rtx, rtx); + +/* The various uses that a comparison can have; used by can_compare_p: + jumps, conditional moves, store flag operations. */ +enum can_compare_purpose +{ + ccp_jump, + ccp_cmov, + ccp_store_flag +}; + +/* Nonzero if a compare of mode MODE can be done straightforwardly + (without splitting it into pieces). */ +extern int can_compare_p (enum rtx_code, machine_mode, + enum can_compare_purpose); extern rtx prepare_operand (enum insn_code, rtx, int, machine_mode, machine_mode, int); +/* Emit a pair of rtl insns to compare two rtx's and to jump + to a label if the comparison is true. */ +extern void emit_cmp_and_jump_insns (rtx, rtx, enum rtx_code, rtx, + machine_mode, int, rtx, int prob=-1); + +/* Generate code to indirectly jump to a location given in the rtx LOC. */ +extern void emit_indirect_jump (rtx); + +#include "insn-config.h" + +#ifndef GCC_INSN_CONFIG_H +#error "insn-config.h must be included before optabs.h" +#endif + +#ifdef HAVE_conditional_move +/* Emit a conditional move operation. */ +rtx emit_conditional_move (rtx, enum rtx_code, rtx, rtx, machine_mode, + rtx, rtx, machine_mode, int); + +/* Return nonzero if the conditional move is supported. */ +int can_conditionally_move_p (machine_mode mode); + +#endif +rtx emit_conditional_add (rtx, enum rtx_code, rtx, rtx, machine_mode, + rtx, rtx, machine_mode, int); + +/* Create but don't emit one rtl instruction to perform certain operations. + Modes must match; operands must meet the operation's predicates. + Likewise for subtraction and for just copying. */ +extern rtx gen_add2_insn (rtx, rtx); +extern rtx gen_add3_insn (rtx, rtx, rtx); +extern int have_add2_insn (rtx, rtx); +extern rtx gen_addptr3_insn (rtx, rtx, rtx); +extern int have_addptr3_insn (rtx, rtx, rtx); +extern rtx gen_sub2_insn (rtx, rtx); +extern rtx gen_sub3_insn (rtx, rtx, rtx); +extern int have_sub2_insn (rtx, rtx); + +/* Return the INSN_CODE to use for an extend operation. */ +extern enum insn_code can_extend_p (machine_mode, machine_mode, int); + +/* Generate the body of an insn to extend Y (with mode MFROM) + into X (with mode MTO). Do zero-extension if UNSIGNEDP is nonzero. */ +extern rtx gen_extend_insn (rtx, rtx, machine_mode, + machine_mode, int); + +/* Return the insn_code for a FLOAT_EXPR. */ +enum insn_code can_float_p (machine_mode, machine_mode, int); + +/* Check whether an operation represented by the code CODE is a + convert operation that is supported by the target platform in + vector form */ +bool supportable_convert_operation (enum tree_code, tree, tree, tree *, + enum tree_code *); + +/* Generate code for a FLOAT_EXPR. */ +extern void expand_float (rtx, rtx, int); + +/* Generate code for a FIX_EXPR. */ +extern void expand_fix (rtx, rtx, int); + +/* Generate code for a FIXED_CONVERT_EXPR. */ +extern void expand_fixed_convert (rtx, rtx, int, int); + +/* Generate code for float to integral conversion. */ +extern bool expand_sfix_optab (rtx, rtx, convert_optab); + +/* Report whether the machine description contains an insn which can + perform the operation described by CODE and MODE. */ +extern int have_insn_for (enum rtx_code, machine_mode); extern void gen_int_libfunc (optab, const char *, char, machine_mode); extern void gen_fp_libfunc (optab, const char *, char, machine_mode); @@ -542,7 +470,102 @@ extern void gen_satfract_conv_libfunc (convert_optab, const char *, extern void gen_satfractuns_conv_libfunc (convert_optab, const char *, machine_mode, machine_mode); + +/* Build a decl for a libfunc named NAME. */ +extern tree build_libfunc_function (const char *); + +/* Call this to initialize an optab function entry. */ +extern rtx init_one_libfunc (const char *); +extern rtx set_user_assembler_libfunc (const char *, const char *); + +/* Call this to reset the function entry for one optab. */ +extern void set_optab_libfunc (optab, machine_mode, const char *); +extern void set_conv_libfunc (convert_optab, machine_mode, + machine_mode, const char *); + +/* Call this once to initialize the contents of the optabs + appropriately for the current target machine. */ +extern void init_optabs (void); extern void init_tree_optimization_optabs (tree); + +/* Call this to install all of the __sync libcalls up to size MAX. */ +extern void init_sync_libfuncs (int max); + +/* Generate a conditional trap instruction. */ +extern rtx gen_cond_trap (enum rtx_code, rtx, rtx, rtx); + +/* Return true if target supports vector operations for VEC_PERM_EXPR. */ +extern bool can_vec_perm_p (machine_mode, bool, const unsigned char *); + +/* Generate code for VEC_PERM_EXPR. */ +extern rtx expand_vec_perm (machine_mode, rtx, rtx, rtx, rtx); + +/* Return tree if target supports vector operations for COND_EXPR. */ +bool expand_vec_cond_expr_p (tree, tree); + +/* Generate code for VEC_COND_EXPR. */ +extern rtx expand_vec_cond_expr (tree, tree, tree, tree, rtx); + +/* Return non-zero if target supports a given highpart multiplication. */ +extern int can_mult_highpart_p (machine_mode, bool); + +/* Generate code for MULT_HIGHPART_EXPR. */ +extern rtx expand_mult_highpart (machine_mode, rtx, rtx, rtx, bool); + +/* Return true if target supports vector masked load/store for mode. */ +extern bool can_vec_mask_load_store_p (machine_mode, bool); + +/* Return true if there is an inline compare and swap pattern. */ +extern bool can_compare_and_swap_p (machine_mode, bool); + +/* Return true if there is an inline atomic exchange pattern. */ +extern bool can_atomic_exchange_p (machine_mode, bool); + +extern rtx expand_sync_lock_test_and_set (rtx, rtx, rtx); +extern rtx expand_atomic_test_and_set (rtx, rtx, enum memmodel); +extern rtx expand_atomic_exchange (rtx, rtx, rtx, enum memmodel); +extern bool expand_atomic_compare_and_swap (rtx *, rtx *, rtx, rtx, rtx, bool, + enum memmodel, enum memmodel); +/* Generate memory barriers. */ +extern void expand_mem_thread_fence (enum memmodel); +extern void expand_mem_signal_fence (enum memmodel); + +rtx expand_atomic_load (rtx, rtx, enum memmodel); +rtx expand_atomic_store (rtx, rtx, enum memmodel, bool); +rtx expand_atomic_fetch_op (rtx, rtx, rtx, enum rtx_code, enum memmodel, + bool); + +extern bool insn_operand_matches (enum insn_code icode, unsigned int opno, + rtx operand); +extern bool valid_multiword_target_p (rtx); +extern void create_convert_operand_from_type (struct expand_operand *op, + rtx value, tree type); +extern bool maybe_legitimize_operands (enum insn_code icode, + unsigned int opno, unsigned int nops, + struct expand_operand *ops); +extern rtx maybe_gen_insn (enum insn_code icode, unsigned int nops, + struct expand_operand *ops); +extern bool maybe_expand_insn (enum insn_code icode, unsigned int nops, + struct expand_operand *ops); +extern bool maybe_expand_jump_insn (enum insn_code icode, unsigned int nops, + struct expand_operand *ops); +extern void expand_insn (enum insn_code icode, unsigned int nops, + struct expand_operand *ops); +extern void expand_jump_insn (enum insn_code icode, unsigned int nops, + struct expand_operand *ops); + +/* Enumerates the possible extraction_insn operations. */ +enum extraction_pattern { EP_insv, EP_extv, EP_extzv }; + +extern bool get_best_reg_extraction_insn (extraction_insn *, + enum extraction_pattern, + unsigned HOST_WIDE_INT, + machine_mode); +extern bool get_best_mem_extraction_insn (extraction_insn *, + enum extraction_pattern, + HOST_WIDE_INT, HOST_WIDE_INT, + machine_mode); + extern bool lshift_cheap_p (bool); #endif /* GCC_OPTABS_H */ diff --git a/gcc/postreload.c b/gcc/postreload.c index 2e44b0d73ac..43d4681886c 100644 --- a/gcc/postreload.c +++ b/gcc/postreload.c @@ -35,6 +35,7 @@ along with GCC; see the file COPYING3. If not see #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "regs.h" #include "predict.h" diff --git a/gcc/ree.c b/gcc/ree.c index 2b44ccc6b54..33769013760 100644 --- a/gcc/ree.c +++ b/gcc/ree.c @@ -242,8 +242,8 @@ along with GCC; see the file COPYING3. If not see #include "recog.h" #include "diagnostic-core.h" #include "target.h" -#include "optabs.h" #include "insn-codes.h" +#include "optabs.h" #include "rtlhooks-def.h" #include "params.h" #include "tree-pass.h" diff --git a/gcc/reload.c b/gcc/reload.c index 70f346a3da7..9ef2c89887a 100644 --- a/gcc/reload.c +++ b/gcc/reload.c @@ -96,6 +96,7 @@ a register with any other reload. */ #include "tm_p.h" #include "insn-config.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "recog.h" #include "dominance.h" diff --git a/gcc/reload1.c b/gcc/reload1.c index 77d904263a0..dab8a7532e0 100644 --- a/gcc/reload1.c +++ b/gcc/reload1.c @@ -36,6 +36,7 @@ along with GCC; see the file COPYING3. If not see #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "regs.h" #include "addresses.h" diff --git a/gcc/shrink-wrap.c b/gcc/shrink-wrap.c index cfdcf86dd71..aae66433439 100644 --- a/gcc/shrink-wrap.c +++ b/gcc/shrink-wrap.c @@ -38,6 +38,7 @@ along with GCC; see the file COPYING3. If not see #include "input.h" #include "function.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "regs.h" diff --git a/gcc/simplify-rtx.c b/gcc/simplify-rtx.c index be1632448a8..1e4ba2369d5 100644 --- a/gcc/simplify-rtx.c +++ b/gcc/simplify-rtx.c @@ -37,6 +37,8 @@ along with GCC; see the file COPYING3. If not see #include "machmode.h" #include "input.h" #include "function.h" +#include "insn-codes.h" +#include "optabs.h" #include "expr.h" #include "diagnostic-core.h" #include "ggc.h" diff --git a/gcc/stmt.c b/gcc/stmt.c index 04303676e8f..1dc11ac40f6 100644 --- a/gcc/stmt.c +++ b/gcc/stmt.c @@ -49,6 +49,7 @@ along with GCC; see the file COPYING3. If not see #include "output.h" #include "langhooks.h" #include "predict.h" +#include "insn-codes.h" #include "optabs.h" #include "target.h" #include "cfganal.h" diff --git a/gcc/target-globals.c b/gcc/target-globals.c index 9122d672d0b..2e03c5cb3bd 100644 --- a/gcc/target-globals.c +++ b/gcc/target-globals.c @@ -34,6 +34,7 @@ along with GCC; see the file COPYING3. If not see #include "reload.h" #include "expmed.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "libfuncs.h" #include "cfgloop.h" diff --git a/gcc/targhooks.c b/gcc/targhooks.c index eef3d457b4e..d1d3119a9f0 100644 --- a/gcc/targhooks.c +++ b/gcc/targhooks.c @@ -69,6 +69,7 @@ along with GCC; see the file COPYING3. If not see #include "target-def.h" #include "regs.h" #include "reload.h" +#include "insn-codes.h" #include "optabs.h" #include "recog.h" #include "intl.h" @@ -78,7 +79,6 @@ along with GCC; see the file COPYING3. If not see #include "gimplify.h" #include "stringpool.h" #include "tree-ssanames.h" -#include "insn-codes.h" bool diff --git a/gcc/toplev.c b/gcc/toplev.c index 2c570d4afd6..eb37bfe6395 100644 --- a/gcc/toplev.c +++ b/gcc/toplev.c @@ -95,6 +95,7 @@ along with GCC; see the file COPYING3. If not see #include "ipa-reference.h" #include "ipa-prop.h" #include "gcse.h" +#include "insn-codes.h" #include "optabs.h" #if defined(DBX_DEBUGGING_INFO) || defined(XCOFF_DEBUGGING_INFO) diff --git a/gcc/tree-if-conv.c b/gcc/tree-if-conv.c index 595c05b46d7..d7e9b0733dc 100644 --- a/gcc/tree-if-conv.c +++ b/gcc/tree-if-conv.c @@ -125,6 +125,7 @@ along with GCC; see the file COPYING3. If not see #include "tree-pass.h" #include "dbgcnt.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" /* List of basic blocks in if-conversion-suitable order. */ diff --git a/gcc/tree-ssa-forwprop.c b/gcc/tree-ssa-forwprop.c index 3267bb9a3db..21f089ce024 100644 --- a/gcc/tree-ssa-forwprop.c +++ b/gcc/tree-ssa-forwprop.c @@ -60,6 +60,7 @@ along with GCC; see the file COPYING3. If not see #include "diagnostic.h" #include "expr.h" #include "cfgloop.h" +#include "insn-codes.h" #include "optabs.h" #include "tree-ssa-propagate.h" #include "tree-ssa-dom.h" diff --git a/gcc/tree-ssa-loop-prefetch.c b/gcc/tree-ssa-loop-prefetch.c index 0d6805b96ce..2efa2dd9705 100644 --- a/gcc/tree-ssa-loop-prefetch.c +++ b/gcc/tree-ssa-loop-prefetch.c @@ -65,6 +65,7 @@ along with GCC; see the file COPYING3. If not see /* FIXME: Needed for optabs, but this should all be moved to a TBD interface between the GIMPLE and RTL worlds. */ #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "recog.h" diff --git a/gcc/tree-ssa-math-opts.c b/gcc/tree-ssa-math-opts.c index 295e2b56101..12fa4e8ca10 100644 --- a/gcc/tree-ssa-math-opts.c +++ b/gcc/tree-ssa-math-opts.c @@ -129,6 +129,7 @@ along with GCC; see the file COPYING3. If not see /* FIXME: RTL headers have to be included here for optabs. */ #include "rtl.h" /* Because optabs.h wants enum rtx_code. */ #include "expr.h" /* Because optabs.h wants sepops. */ +#include "insn-codes.h" #include "optabs.h" /* This structure represents one basic block that either computes a diff --git a/gcc/tree-ssa-phiopt.c b/gcc/tree-ssa-phiopt.c index 94c7f4030e9..c7c839d29ac 100644 --- a/gcc/tree-ssa-phiopt.c +++ b/gcc/tree-ssa-phiopt.c @@ -62,6 +62,7 @@ along with GCC; see the file COPYING3. If not see #include "gimple-pretty-print.h" #include "insn-config.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "tree-scalar-evolution.h" #include "tree-inline.h" diff --git a/gcc/tree-ssa-reassoc.c b/gcc/tree-ssa-reassoc.c index b95acfe7c6f..748249d7513 100644 --- a/gcc/tree-ssa-reassoc.c +++ b/gcc/tree-ssa-reassoc.c @@ -73,6 +73,7 @@ along with GCC; see the file COPYING3. If not see #include "diagnostic-core.h" #include "builtins.h" #include "gimplify.h" +#include "insn-codes.h" #include "optabs.h" /* This is a simple global reassociation pass. It is, in part, based diff --git a/gcc/tree-switch-conversion.c b/gcc/tree-switch-conversion.c index 32f0a11d3ae..13a54106c49 100644 --- a/gcc/tree-switch-conversion.c +++ b/gcc/tree-switch-conversion.c @@ -71,6 +71,7 @@ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA /* Need to include expr.h and optabs.h for lshift_cheap_p. */ #include "expr.h" +#include "insn-codes.h" #include "optabs.h" /* Maximum number of case bit tests. diff --git a/gcc/tree-vect-data-refs.c b/gcc/tree-vect-data-refs.c index f32bb3d73a0..0bc03561cb0 100644 --- a/gcc/tree-vect-data-refs.c +++ b/gcc/tree-vect-data-refs.c @@ -69,6 +69,7 @@ along with GCC; see the file COPYING3. If not see #include "cgraph.h" /* Need to include rtl.h, expr.h, etc. for optabs. */ #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "builtins.h" #include "varasm.h" diff --git a/gcc/tree-vect-generic.c b/gcc/tree-vect-generic.c index d9445a4fb66..a0c1363eae5 100644 --- a/gcc/tree-vect-generic.c +++ b/gcc/tree-vect-generic.c @@ -55,6 +55,7 @@ along with GCC; see the file COPYING3. If not see /* Need to include rtl.h, expr.h, etc. for optabs. */ #include "expr.h" +#include "insn-codes.h" #include "optabs.h" diff --git a/gcc/tree-vect-loop.c b/gcc/tree-vect-loop.c index 6855f841ee8..f3f02fadb1d 100644 --- a/gcc/tree-vect-loop.c +++ b/gcc/tree-vect-loop.c @@ -59,6 +59,7 @@ along with GCC; see the file COPYING3. If not see #include "cfgloop.h" #include "expr.h" #include "recog.h" +#include "insn-codes.h" #include "optabs.h" #include "params.h" #include "diagnostic-core.h" diff --git a/gcc/tree-vect-patterns.c b/gcc/tree-vect-patterns.c index 8478dfcb715..24ebba2381b 100644 --- a/gcc/tree-vect-patterns.c +++ b/gcc/tree-vect-patterns.c @@ -51,6 +51,7 @@ along with GCC; see the file COPYING3. If not see #include "tree-ssanames.h" #include "cfgloop.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "params.h" #include "tree-data-ref.h" diff --git a/gcc/tree-vect-slp.c b/gcc/tree-vect-slp.c index de2e6016746..de62c6d0c37 100644 --- a/gcc/tree-vect-slp.c +++ b/gcc/tree-vect-slp.c @@ -52,6 +52,7 @@ along with GCC; see the file COPYING3. If not see #include "cfgloop.h" #include "expr.h" #include "recog.h" /* FIXME: for insn_data */ +#include "insn-codes.h" #include "optabs.h" #include "tree-vectorizer.h" #include "langhooks.h" diff --git a/gcc/tree-vect-stmts.c b/gcc/tree-vect-stmts.c index 02559481f13..2a5f23cbe0f 100644 --- a/gcc/tree-vect-stmts.c +++ b/gcc/tree-vect-stmts.c @@ -60,6 +60,7 @@ along with GCC; see the file COPYING3. If not see #include "tree-scalar-evolution.h" #include "expr.h" #include "recog.h" /* FIXME: for insn_data */ +#include "insn-codes.h" #include "optabs.h" #include "diagnostic-core.h" #include "tree-vectorizer.h" diff --git a/gcc/tree-vrp.c b/gcc/tree-vrp.c index 2264242b9ad..4e4ebe03057 100644 --- a/gcc/tree-vrp.c +++ b/gcc/tree-vrp.c @@ -69,6 +69,7 @@ along with GCC; see the file COPYING3. If not see #include "tree-chrec.h" #include "tree-ssa-threadupdate.h" #include "expr.h" +#include "insn-codes.h" #include "optabs.h" #include "tree-ssa-threadedge.h" #include "wide-int.h" diff --git a/gcc/value-prof.c b/gcc/value-prof.c index a65ccb8e8c9..0e4ec8aefc0 100644 --- a/gcc/value-prof.c +++ b/gcc/value-prof.c @@ -41,6 +41,7 @@ along with GCC; see the file COPYING3. If not see #include "flags.h" #include "insn-config.h" #include "recog.h" +#include "insn-codes.h" #include "optabs.h" #include "regs.h" #include "tree-ssa-alias.h" |