* acinclude.m4: Include libtool macros from the top level.

* aclocal.m4, configure: Rebuilt.


git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@36287 138bc75d-0d04-0410-961f-82ee72b054a4

4 files changed, 646 insertions, 577 deletions

diff --git a/libffi/ChangeLog b/libffi/ChangeLog
index 3c638234824..66fedd0e70f 100644
--- a/libffi/ChangeLog
+++ b/libffi/ChangeLog
@@ -1,3 +1,8 @@
+2000-09-10  Alexandre Oliva  <aoliva@redhat.com>
+
+	* acinclude.m4: Include libtool macros from the top level.
+	* aclocal.m4, configure: Rebuilt.
+
 2000-08-22  Alexandre Oliva  <aoliva@redhat.com>
 
 	* configure.in [i*86-*-freebsd*] (TARGET, TARGETDIR): Set.
diff --git a/libffi/acinclude.m4 b/libffi/acinclude.m4
new file mode 100644
index 00000000000..162f6625d16
--- /dev/null
+++ b/libffi/acinclude.m4
@@ -0,0 +1,8 @@
+sinclude(../libtool.m4)
+dnl The lines below arrange for aclocal not to bring libtool.m4
+dnl AC_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[
+AC_DEFUN([AC_PROG_LIBTOOL],)
+AC_SUBST(LIBTOOL)
+])
diff --git a/libffi/aclocal.m4 b/libffi/aclocal.m4
index 5bcef980326..63ff94205d8 100644
--- a/libffi/aclocal.m4
+++ b/libffi/aclocal.m4
@@ -10,6 +10,15 @@ dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
 dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 dnl PARTICULAR PURPOSE.
 
+sinclude(../libtool.m4)
+dnl The lines below arrange for aclocal not to bring libtool.m4
+dnl AC_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[
+AC_DEFUN([AC_PROG_LIBTOOL],)
+AC_SUBST(LIBTOOL)
+])
+
 # Like AC_CONFIG_HEADER, but automatically create stamp file.
 
 AC_DEFUN(AM_CONFIG_HEADER,
@@ -158,412 +167,3 @@ else
   $1_FALSE=
 fi])
 
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$lt_target" in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
-  case "$ac_prog" in
-    # Accept absolute paths.
-changequote(,)dnl
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      ac_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  ac_cv_prog_gnu_ld=yes
-else
-  ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  ac_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -B"
-	break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -p"
-	break
-      else
-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$lt_target" in
-*-*-beos* | *-*-cygwin*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case "$enable_ltdl_convenience" in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
-  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
-    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
diff --git a/libffi/configure b/libffi/configure
index d25a6eed590..6a8475d624e 100755
--- a/libffi/configure
+++ b/libffi/configure
@@ -27,6 +27,8 @@ ac_help="$ac_help
 ac_help="$ac_help
   --disable-libtool-lock  avoid locking (might break parallel builds)"
 ac_help="$ac_help
+  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
+ac_help="$ac_help
   --enable-debug          debugging mode"
 ac_help="$ac_help
   --disable-structs       omit code for struct support"
@@ -51,7 +53,6 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
-sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -166,7 +167,6 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -337,11 +337,6 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -507,16 +502,12 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
   fi
-else
-  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -616,7 +607,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:620: checking host system type" >&5
+echo "configure:611: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -649,7 +640,7 @@ echo "$ac_t""$host" 1>&6
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:653: checking for a BSD compatible install" >&5
+echo "configure:644: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -702,7 +693,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:706: checking whether build environment is sane" >&5
+echo "configure:697: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -759,7 +750,7 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:763: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:754: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -798,7 +789,7 @@ fi
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:802: checking for working aclocal" >&5
+echo "configure:793: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -811,7 +802,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:815: checking for working autoconf" >&5
+echo "configure:806: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -824,7 +815,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:828: checking for working automake" >&5
+echo "configure:819: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -837,7 +828,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:841: checking for working autoheader" >&5
+echo "configure:832: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -850,7 +841,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:854: checking for working makeinfo" >&5
+echo "configure:845: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -865,12 +856,12 @@ fi
 
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:869: checking for Cygwin environment" >&5
+echo "configure:860: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 874 "configure"
+#line 865 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -881,7 +872,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:885: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:876: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -898,19 +889,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:902: checking for mingw32 environment" >&5
+echo "configure:893: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 907 "configure"
+#line 898 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:914: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:905: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -929,7 +920,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:933: checking for executable suffix" >&5
+echo "configure:924: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -939,10 +930,10 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:943: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:934: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+      *.c | *.o | *.obj) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -960,7 +951,7 @@ echo "$ac_t""${ac_cv_exeext}" 1>&6
 ac_exeext=$EXEEXT
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:964: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:955: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -986,7 +977,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:990: checking for $ac_word" >&5
+echo "configure:981: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1016,7 +1007,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1020: checking for $ac_word" >&5
+echo "configure:1011: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1067,7 +1058,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1071: checking for $ac_word" >&5
+echo "configure:1062: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1099,7 +1090,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1103: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1094: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1110,12 +1101,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1114 "configure"
+#line 1105 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1141,12 +1132,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1145: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1136: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1150: checking whether we are using GNU C" >&5
+echo "configure:1141: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1155,7 +1146,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1159: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1150: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1174,7 +1165,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1178: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1169: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1275,7 +1266,7 @@ else
 fi
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1279: checking build system type" >&5
+echo "configure:1270: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -1292,36 +1283,6 @@ build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$build" 1>&6
 
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1299: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
 # Check whether --with-gnu-ld or --without-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
   withval="$with_gnu_ld"
@@ -1334,8 +1295,14 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1338: checking for ld used by GCC" >&5
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+echo "configure:1299: checking for ld used by GCC" >&5
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
   case "$ac_prog" in
     # Accept absolute paths.
     [\\/]* | [A-Za-z]:[\\/]*)
@@ -1358,10 +1325,10 @@ echo "configure:1338: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1362: checking for GNU ld" >&5
+echo "configure:1329: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1365: checking for non-GNU ld" >&5
+echo "configure:1332: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1396,7 +1363,7 @@ else
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1400: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1367: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1409,10 +1376,23 @@ fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$ac_cv_prog_gnu_ld
 
 
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1384: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1416: checking for BSD-compatible nm" >&5
+echo "configure:1396: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1423,18 +1403,20 @@ else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+    tmp_nm=$ac_dir/${ac_tool_prefix}nm
+    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -B"
+      # Tru64's nm complains that /dev/null is an invalid object file
+      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+	ac_cv_path_NM="$tmp_nm -B"
 	break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -p"
+      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	ac_cv_path_NM="$tmp_nm -p"
 	break
       else
-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+	ac_cv_path_NM=${ac_cv_path_NM="$tmp_nm"} # keep the first match, but
 	continue # so that we can try to find one that supports BSD flags
       fi
     fi
@@ -1448,7 +1430,7 @@ NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1452: checking whether ln -s works" >&5
+echo "configure:1434: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1468,11 +1450,450 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1455: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  lt_cv_file_magic_cmd='${MAGIC}'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case "$host_os" in
+aix4*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi4*)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+    lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin* | mingw*)
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='${OBJDUMP} -f'
+  ;;
+
+freebsd* )
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case "$host_cpu" in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+            lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+            lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20*)
+  # TODO:  Does this work for hpux-11 too?
+  lt_cv_deplibs_check_method='file_magic (s0-90-90-9|PA-RISC0-9.0-9) shared library'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libc.sl
+  ;;
+
+irix5* | irix6*)
+  case "$host_os" in
+  irix5*)
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case "$LD" in
+    *-32|*"-32 ") libmagic=32-bit;;
+    *-n32|*"-n32 ") libmagic=N32;;
+    *-64|*"-64 ") libmagic=64-bit;;
+    *) libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+        lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+        ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  case "$host_cpu" in
+  alpha* | i*86 | powerpc* | sparc* | ia64* )
+    lt_cv_deplibs_check_method=pass_all ;;
+  *)
+    # glibc up to 2.1.1 does not perform some relocations on ARM
+        lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+      esac
+  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then :
+  else
+        lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+        lt_cv_file_magic_cmd='/usr/bin/file -L'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  # this will be overridden with pass_all, but let us keep it just in case
+  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  lt_cv_file_magic_test_file=/lib/libc.so
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case "$host_vendor" in
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  motorola)
+        lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+        lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  esac
+  ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1598: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  for ac_file in conftest.*; do
+    case $ac_file in
+    *.c) ;;
+    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+    esac
+  done
+else
+  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+if test $host != $build; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case "$deplibs_check_method" in
+file_magic*)
+  if test "$file_magic_cmd" = '${MAGIC}'; then
+    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1634: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MAGIC" in
+  /*)
+  lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC="$MAGIC"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case "$deplibs_check_method" in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC="$lt_cv_path_MAGIC"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
 
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC="$ac_save_MAGIC"
+  ;;
 esac
+fi
+
+MAGIC="$lt_cv_path_MAGIC"
+if test -n "$MAGIC"; then
+  echo "$ac_t""$MAGIC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC"; then
+  if test -n "$ac_tool_prefix"; then
+    echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1696: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MAGIC" in
+  /*)
+  lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC="$MAGIC"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case "$deplibs_check_method" in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC="$lt_cv_path_MAGIC"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC="$ac_save_MAGIC"
+  ;;
+esac
+fi
+
+MAGIC="$lt_cv_path_MAGIC"
+if test -n "$MAGIC"; then
+  echo "$ac_t""$MAGIC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  else
+    MAGIC=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1767: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1799: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+else
+  RANLIB=":"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1834: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1866: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="strip"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+else
+  STRIP=":"
+fi
+fi
+
 
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
@@ -1492,13 +1913,24 @@ fi
 test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
 test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+  withval="$with_pic"
+  pic_mode="$withval"
+else
+  pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$lt_target" in
+case "$host" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1501 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1502: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1933 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1934: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1519,19 +1951,27 @@ case "$lt_target" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1523: checking whether the C compiler needs -belf" >&5
+echo "configure:1955: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  cat > conftest.$ac_ext <<EOF
-#line 1528 "configure"
+  
+     ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+     cat > conftest.$ac_ext <<EOF
+#line 1968 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1535: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1541,6 +1981,13 @@ else
   lt_cv_cc_needs_belf=no
 fi
 rm -f conftest*
+     ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
 fi
 
 echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
@@ -1604,12 +2051,14 @@ rm -f confcache
 
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC="$MAGIC" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
@@ -1623,7 +2072,7 @@ fi
 
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -1633,6 +2082,11 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 exec 5>>./config.log
 
 
+  
+
+  
+	 
+
 TARGETDIR="unknown"
 case "$host" in
 mips-sgi-irix5.* | mips-sgi-irix6.*) TARGET=MIPS; TARGETDIR=mips;;
@@ -1739,7 +2193,7 @@ else
 fi
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1742: checking how to run the C preprocessor" >&5
+echo "configure:2197: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1754,13 +2208,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1757 "configure"
+#line 2212 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1763: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2218: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1771,13 +2225,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1774 "configure"
+#line 2229 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1780: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1788,13 +2242,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1791 "configure"
+#line 2246 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1819,12 +2273,12 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1822: checking for ANSI C header files" >&5
+echo "configure:2277: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1827 "configure"
+#line 2282 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -1832,7 +2286,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1835: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2290: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1849,7 +2303,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1852 "configure"
+#line 2307 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -1867,7 +2321,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1870 "configure"
+#line 2325 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -1888,7 +2342,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 1891 "configure"
+#line 2346 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1899,7 +2353,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:1902: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -1925,12 +2379,12 @@ fi
 for ac_func in memcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1928: checking for $ac_func" >&5
+echo "configure:2383: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1933 "configure"
+#line 2388 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1953,7 +2407,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1980,19 +2434,19 @@ done
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1983: checking for working alloca.h" >&5
+echo "configure:2438: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1988 "configure"
+#line 2443 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:1995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -2013,12 +2467,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2016: checking for alloca" >&5
+echo "configure:2471: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2021 "configure"
+#line 2476 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -2046,7 +2500,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:2049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -2078,12 +2532,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2081: checking whether alloca needs Cray hooks" >&5
+echo "configure:2536: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2086 "configure"
+#line 2541 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -2108,12 +2562,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2111: checking for $ac_func" >&5
+echo "configure:2566: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2116 "configure"
+#line 2571 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2136,7 +2590,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2163,7 +2617,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2166: checking stack direction for C alloca" >&5
+echo "configure:2621: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2171,7 +2625,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 2174 "configure"
+#line 2629 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -2190,7 +2644,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:2193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -2213,7 +2667,7 @@ fi
 
 
 echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:2216: checking size of short" >&5
+echo "configure:2671: checking size of short" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2221,7 +2675,7 @@ else
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2224 "configure"
+#line 2679 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2232,7 +2686,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_short=`cat conftestval`
 else
@@ -2252,7 +2706,7 @@ EOF
 
 
 echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:2255: checking size of int" >&5
+echo "configure:2710: checking size of int" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2260,7 +2714,7 @@ else
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2263 "configure"
+#line 2718 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2271,7 +2725,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2729: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_int=`cat conftestval`
 else
@@ -2291,7 +2745,7 @@ EOF
 
 
 echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:2294: checking size of long" >&5
+echo "configure:2749: checking size of long" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2299,7 +2753,7 @@ else
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2302 "configure"
+#line 2757 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2310,7 +2764,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_long=`cat conftestval`
 else
@@ -2330,7 +2784,7 @@ EOF
 
 
 echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2333: checking size of long long" >&5
+echo "configure:2788: checking size of long long" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2338,7 +2792,7 @@ else
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2341 "configure"
+#line 2796 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2349,7 +2803,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_long_long=`cat conftestval`
 else
@@ -2369,7 +2823,7 @@ EOF
 
 
 echo $ac_n "checking size of float""... $ac_c" 1>&6
-echo "configure:2372: checking size of float" >&5
+echo "configure:2827: checking size of float" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_float'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2377,7 +2831,7 @@ else
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2380 "configure"
+#line 2835 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2388,7 +2842,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_float=`cat conftestval`
 else
@@ -2408,7 +2862,7 @@ EOF
 
 
 echo $ac_n "checking size of double""... $ac_c" 1>&6
-echo "configure:2411: checking size of double" >&5
+echo "configure:2866: checking size of double" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_double'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2416,7 +2870,7 @@ else
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2419 "configure"
+#line 2874 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2427,7 +2881,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_double=`cat conftestval`
 else
@@ -2447,7 +2901,7 @@ EOF
 
 
 echo $ac_n "checking size of long double""... $ac_c" 1>&6
-echo "configure:2450: checking size of long double" >&5
+echo "configure:2905: checking size of long double" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2455,7 +2909,7 @@ else
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2458 "configure"
+#line 2913 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2466,7 +2920,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_long_double=`cat conftestval`
 else
@@ -2487,7 +2941,7 @@ EOF
 
 
 echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:2490: checking size of void *" >&5
+echo "configure:2945: checking size of void *" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2495,7 +2949,7 @@ else
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2498 "configure"
+#line 2953 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2506,7 +2960,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_void_p=`cat conftestval`
 else
@@ -2526,14 +2980,14 @@ EOF
 
 
 echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:2529: checking whether byte ordering is bigendian" >&5
+echo "configure:2984: checking whether byte ordering is bigendian" >&5
 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_bigendian=unknown
 # See if sys/param.h defines the BYTE_ORDER macro.
 cat > conftest.$ac_ext <<EOF
-#line 2536 "configure"
+#line 2991 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -2544,11 +2998,11 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:2547: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3002: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   # It does; now see whether it defined to BIG_ENDIAN or not.
 cat > conftest.$ac_ext <<EOF
-#line 2551 "configure"
+#line 3006 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -2559,7 +3013,7 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:2562: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3017: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_bigendian=yes
 else
@@ -2579,7 +3033,7 @@ if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 2582 "configure"
+#line 3037 "configure"
 #include "confdefs.h"
 main () {
   /* Are we little or big endian?  From Harbison&Steele.  */
@@ -2592,7 +3046,7 @@ main () {
   exit (u.c[sizeof (long) - 1] == 1);
 }
 EOF
-if { (eval echo configure:2595: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_bigendian=no
 else
@@ -2837,8 +3291,10 @@ s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
-s%@RANLIB@%$RANLIB%g
 s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@MIPS_GCC_TRUE@%$MIPS_GCC_TRUE%g
 s%@MIPS_GCC_FALSE@%$MIPS_GCC_FALSE%g