aclocal.m4: Replace with version copied from libstdc++-v3.

	* aclocal.m4: Replace with version copied from libstdc++-v3.
	* configure.in: Update for changes to aclocal and Makefile.
	* configure: Regenerate.
	* Makefile.in: Correct install and uninstall for cross targets.
	* libU77/configure: Regenerate.

From-SVN: r49316

1 files changed, 635 insertions, 381 deletions

diff --git a/libf2c/configure b/libf2c/configure
index 664aeffeab2..7f80046a33f 100755
--- a/libf2c/configure
+++ b/libf2c/configure
@@ -12,6 +12,15 @@ ac_help=
 ac_default_prefix=/usr/local
 # Any additions from configure.in:
 ac_help="$ac_help
+  --enable-multilib       build hella library versions (default)"
+ac_help="$ac_help
+  --with-target-subdir=SUBDIR
+                           configuring in a subdirectory"
+ac_help="$ac_help
+  --with-cross-host=HOST  configuring with a cross compiler"
+ac_help="$ac_help
+  --enable-version-specific-runtime-libs    Specify that runtime libraries should be installed in a compiler-specific directory "
+ac_help="$ac_help
   --enable-shared[=PKGS]  build shared libraries [default=yes]"
 ac_help="$ac_help
   --enable-static[=PKGS]  build static libraries [default=yes]"
@@ -40,7 +49,6 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
-sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -155,7 +163,6 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -326,11 +333,6 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -496,16 +498,12 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
   fi
-else
-  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -545,17 +543,8 @@ fi
 
 
 
-if test "${srcdir}" = "."  ; then
-  if test "${with_target_subdir}" != "." ; then
-    topsrcdir=${with_multisrctop}../..
-  else
-    topsrcdir=${with_multisrctop}..
-  fi
-else
-  topsrcdir=${srcdir}/..
-fi
 ac_aux_dir=
-for ac_dir in $topsrcdir $srcdir/$topsrcdir; do
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
   if test -f $ac_dir/install-sh; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -567,68 +556,117 @@ for ac_dir in $topsrcdir $srcdir/$topsrcdir; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $topsrcdir $srcdir/$topsrcdir" 1>&2; exit 1; }
+  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
 fi
 ac_config_guess=$ac_aux_dir/config.guess
 ac_config_sub=$ac_aux_dir/config.sub
 ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
 
-# If the language specific compiler does not exist, but the "gcc" directory 
-# does, we do not build anything. Note, $r is set by the top-level Makefile.
-# Note that when we look for the compiler, we search both with and without
-# extension to handle cross and canadian cross builds. 
-compiler_name=f771
-rm -f skip-this-dir
-echo $ac_n "checking if compiler $compiler_name has been built""... $ac_c" 1>&6
-echo "configure:585: checking if compiler $compiler_name has been built" >&5
-if eval "test \"`echo '$''{'g77_cv_compiler_exists'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  g77_cv_compiler_exists=yes
-if test -n "$r"; then
-  if test -d "$r"/gcc; then
-    if test -f "$r"/gcc/$compiler_name \
-       || test -f "$r"/gcc/$compiler_name.exe; then
-      true
-    else
-      g77_cv_compiler_exists=no
-      echo "rm -f config.cache config.log multilib.out" > skip-this-dir
-    fi
-  fi
-fi
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
 
-fi
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
 
-echo "$ac_t""$g77_cv_compiler_exists" 1>&6
-if test x$g77_cv_compiler_exists = xno
-then
-  rm -f Makefile conftest* confdefs* core
-  exit 0
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:594: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
 
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
 
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:615: checking target system type" >&5
 
-# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which cant create executables.  So we include AC_EXEEXT to keep
-# automake happy, but we dont execute it, since we dont care about
-# the result.
-if false; then
-  # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
-  # to nothing, so nothing would remain between `then' and `fi' if it
-  # were not for the `:' below.
-  :
-  echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:627: checking for Cygwin environment" >&5
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:633: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+target_alias=${target_alias-$target}
+
+
+if test $host != $build; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:665: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 632 "configure"
+#line 670 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -639,7 +677,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:643: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:681: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -656,19 +694,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:660: checking for mingw32 environment" >&5
+echo "configure:698: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 665 "configure"
+#line 703 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:672: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:710: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -685,47 +723,133 @@ echo "$ac_t""$ac_cv_mingw32" 1>&6
 MINGW32=
 test "$ac_cv_mingw32" = yes && MINGW32=yes
 
+    # Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+  enableval="$enable_multilib"
+  case "${enableval}" in
+    yes) multilib=yes ;;
+    no)  multilib=no ;;
+    *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
+   esac
+else
+  multilib=yes
+fi
+
+# When building with srcdir == objdir, links to the source files will
+# be created in directories within the target_subdir.  We have to
+# adjust toplevel_srcdir accordingly, so that configure finds
+# install-sh and other auxiliary files that live in the top-level
+# source directory.
+if test "${srcdir}" = "."; then
+  if test -z "${with_target_subdir}"; then
+    toprel=".."
+  else
+    if test "${with_target_subdir}" != "."; then
+      toprel="${with_multisrctop}../.."
+    else
+      toprel="${with_multisrctop}.."
+    fi
+  fi
+else
+  toprel=".."
+fi
+ac_aux_dir=
+for ac_dir in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel" 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:691: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+toplevel_srcdir=\${top_srcdir}/$toprel
+
+
+# Export build and source directories.
+# These need to be absolute paths, yet at the same time need to
+# canonicalize only relative paths, because then amd will not unmount
+# drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
+glibcpp_builddir=`pwd`
+case $srcdir in
+\\/$* | ?:\\/*) glibcpp_srcdir=${srcdir} ;;
+*) glibcpp_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
+esac
+
+
+
+
+
+# Will set LN_S to either 'ln -s' or 'ln'.  With autoconf 2.50+, can also
+# be 'cp -p' if linking isn't available.
+#ac_cv_prog_LN_S='cp -p'
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:797: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-  ac_cv_exeext=.exe
+  rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+  rm -f conftestdata
+  ac_cv_prog_LN_S="ln -s"
 else
-  rm -f conftest*
-  echo 'int main () { return 0; }' > conftest.$ac_ext
-  ac_cv_exeext=
-  if { (eval echo configure:701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-    for file in conftest.*; do
-      case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
-      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-      esac
-    done
-  else
-    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-  fi
-  rm -f conftest*
-  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+  ac_cv_prog_LN_S=ln
 fi
 fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
 
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
 
+# We use these options to decide which functions to include.
+# Check whether --with-target-subdir or --without-target-subdir was given.
+if test "${with_target_subdir+set}" = set; then
+  withval="$with_target_subdir"
+  :
+fi
+
+# Check whether --with-cross-host or --without-cross-host was given.
+if test "${with_cross_host+set}" = set; then
+  withval="$with_cross_host"
+  :
 fi
 
-# For g77 we'll set CC to point at the built gcc, but this will get it into
-# the makefiles
+
+  # Never versions of autoconf add an underscore to these functions.
+  # Prevent future problems ...
+  
+  
+  
+  
+
+#  AC_PROG_CC
+
+# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable.  This should really be fixed in autoconf
+# itself.
+
+
+
 
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:729: checking for $ac_word" >&5
+echo "configure:853: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -755,7 +879,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:759: checking for $ac_word" >&5
+echo "configure:883: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -800,46 +924,11 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:810: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
-
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:843: checking whether we are using GNU C" >&5
+echo "configure:932: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -848,7 +937,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:852: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:941: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -859,15 +948,11 @@ echo "$ac_t""$ac_cv_prog_gcc" 1>&6
 
 if test $ac_cv_prog_gcc = yes; then
   GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:871: checking whether ${CC-cc} accepts -g" >&5
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:956: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -882,21 +967,356 @@ rm -f conftest*
 fi
 
 echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
     CFLAGS="-g -O2"
   else
-    CFLAGS="-g"
+    CFLAGS="-O2"
   fi
 else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:987: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AS="${ac_tool_prefix}as"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+  echo "$ac_t""$AS" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1019: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AR="${ac_tool_prefix}ar"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+  echo "$ac_t""$AR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1051: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1083: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB="ranlib-not-found-in-path-error"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+else
+  RANLIB="ranlib-not-found-in-path-error"
+fi
+fi
+
+  # Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1127: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+  # We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
+  # at least currently, we never actually build a program, so we never
+  # need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
+  # fails, because we are probably configuring with a cross compiler
+  # which can't create executables.  So we include AC_EXEEXT to keep
+  # automake happy, but we don't execute it, since we don't care about
+  # the result.
+  if false; then
+    # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+    # to nothing, so nothing would remain between `then' and `fi' if it
+    # were not for the `:' below.
+    :
+    
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1195: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+  ac_cv_exeext=.exe
+else
+  rm -f conftest*
+  echo 'int main () { return 0; }' > conftest.$ac_ext
+  ac_cv_exeext=
+  if { (eval echo configure:1205: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+    for file in conftest.*; do
+      case $file in
+      *.c | *.o | *.obj) ;;
+      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+      esac
+    done
   else
-    CFLAGS=
+    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+  fi
+  rm -f conftest*
+  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
   fi
+
+
+# Assumes glibcpp_builddir, glibcpp_srcdir are alreay set up and
+# exported correctly in GLIBCPP_CONFIGURE.
+glibcpp_toolexecdir=no
+glibcpp_toolexeclibdir=no
+glibcpp_prefixdir=${prefix}
+
+echo $ac_n "checking for interface version number""... $ac_c" 1>&6
+echo "configure:1235: checking for interface version number" >&5
+libstdcxx_interface=$INTERFACE
+echo "$ac_t""$libstdcxx_interface" 1>&6
+
+# Process the option "--enable-version-specific-runtime-libs"
+echo $ac_n "checking for --enable-version-specific-runtime-libs""... $ac_c" 1>&6
+echo "configure:1241: checking for --enable-version-specific-runtime-libs" >&5
+# Check whether --enable-version-specific-runtime-libs or --disable-version-specific-runtime-libs was given.
+if test "${enable_version_specific_runtime_libs+set}" = set; then
+  enableval="$enable_version_specific_runtime_libs"
+  case "$enableval" in
+ yes) version_specific_libs=yes ;;
+ no)  version_specific_libs=no ;;
+ *)   { echo "configure: error: Unknown argument to enable/disable version-specific libs" 1>&2; exit 1; };;
+ esac
+else
+  version_specific_libs=no
 fi
+# Option set, now we can test it.
+echo "$ac_t""$version_specific_libs" 1>&6
+
+gcc_version_trigger=${srcdir}/../gcc/version.c
+gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
+gcc_version=`echo ${gcc_version_full} | sed -e 's/\(^ *\) .*/\1/'`
+
+
+
+if test $version_specific_libs = yes; then
+  # Need the gcc compiler version to know where to install libraries
+  # and header files if --enable-version-specific-runtime-libs option
+  # is selected.
+    glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+  glibcpp_toolexeclibdir='$(toolexecdir)/'${gcc_version}'$(MULTISUBDIR)'
+  fi
+
+# Calculate glibcpp_toolexecdir, glibcpp_toolexeclibdir
+# Install a library built with a cross compiler in tooldir, not libdir.
+if test x"$glibcpp_toolexecdir" = x"no"; then 
+  if test -n "$with_cross_host" &&
+     test x"$with_cross_host" != x"no"; then
+    glibcpp_toolexecdir='$(exec_prefix)/$(target_alias)'
+    glibcpp_toolexeclibdir='$(toolexecdir)/lib$(MULTISUBDIR)'
+  else
+    glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+    glibcpp_toolexeclibdir='$(libdir)$(MULTISUBDIR)'
+  fi
+fi
+
+
+
+
+
+
+# If the language specific compiler does not exist, but the "gcc" directory 
+# does, we do not build anything. Note, $r is set by the top-level Makefile.
+# Note that when we look for the compiler, we search both with and without
+# extension to handle cross and canadian cross builds. 
+compiler_name=f771
+rm -f skip-this-dir
+echo $ac_n "checking if compiler $compiler_name has been built""... $ac_c" 1>&6
+echo "configure:1295: checking if compiler $compiler_name has been built" >&5
+if eval "test \"`echo '$''{'g77_cv_compiler_exists'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  g77_cv_compiler_exists=yes
+if test -n "$r"; then
+  if test -d "$r"/gcc; then
+    if test -f "$r"/gcc/$compiler_name \
+       || test -f "$r"/gcc/$compiler_name.exe; then
+      true
+    else
+      g77_cv_compiler_exists=no
+      echo "rm -f config.cache config.log multilib.out" > skip-this-dir
+    fi
+  fi
+fi
+
+fi
+
+echo "$ac_t""$g77_cv_compiler_exists" 1>&6
+if test x$g77_cv_compiler_exists = xno
+then
+  rm -f Makefile conftest* confdefs* core
+  exit 0
+fi
+
 
 # Check whether --enable-shared or --disable-shared was given.
 if test "${enable_shared+set}" = set; then
@@ -967,51 +1387,6 @@ else
   enable_fast_install=yes
 fi
 
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:978: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:999: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
 # Check whether --with-gnu-ld or --without-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
   withval="$with_gnu_ld"
@@ -1024,7 +1399,7 @@ ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1028: checking for ld used by GCC" >&5
+echo "configure:1403: checking for ld used by GCC" >&5
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -1054,10 +1429,10 @@ echo "configure:1028: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1058: checking for GNU ld" >&5
+echo "configure:1433: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1061: checking for non-GNU ld" >&5
+echo "configure:1436: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1092,7 +1467,7 @@ else
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1096: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1471: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1109,7 +1484,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
 echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1113: checking for $LD option to reload object files" >&5
+echo "configure:1488: checking for $LD option to reload object files" >&5
 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1121,7 +1496,7 @@ reload_flag=$lt_cv_ld_reload_flag
 test -n "$reload_flag" && reload_flag=" $reload_flag"
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1125: checking for BSD-compatible nm" >&5
+echo "configure:1500: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1158,29 +1533,8 @@ fi
 NM="$lt_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1163: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
-else
-  ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
 echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1184: checking how to recognise dependant libraries" >&5
+echo "configure:1538: checking how to recognise dependant libraries" >&5
 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1344,13 +1698,13 @@ file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 
 echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1348: checking for object suffix" >&5
+echo "configure:1702: checking for object suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftest*
 echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1354: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1708: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   for ac_file in conftest.*; do
     case $ac_file in
     *.c) ;;
@@ -1367,12 +1721,6 @@ echo "$ac_t""$ac_cv_objext" 1>&6
 OBJEXT=$ac_cv_objext
 ac_objext=$ac_cv_objext
 
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
 # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
 
 # Only perform the check for file, if the check method requires it
@@ -1380,7 +1728,7 @@ case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:1384: checking for ${ac_tool_prefix}file" >&5
+echo "configure:1732: checking for ${ac_tool_prefix}file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1442,7 +1790,7 @@ fi
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
     echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:1446: checking for file" >&5
+echo "configure:1794: checking for file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1513,7 +1861,7 @@ esac
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1517: checking for $ac_word" >&5
+echo "configure:1865: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1545,7 +1893,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1549: checking for $ac_word" >&5
+echo "configure:1897: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1580,7 +1928,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1584: checking for $ac_word" >&5
+echo "configure:1932: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1612,7 +1960,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1616: checking for $ac_word" >&5
+echo "configure:1964: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1679,8 +2027,8 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1683 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1684: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 2031 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:2032: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1701,7 +2049,7 @@ case $host in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1705: checking whether the C compiler needs -belf" >&5
+echo "configure:2053: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1714,14 +2062,14 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a
 cross_compiling=$ac_cv_prog_cc_cross
 
      cat > conftest.$ac_ext <<EOF
-#line 1718 "configure"
+#line 2066 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1845,7 +2193,7 @@ else
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1849: checking for $ac_word" >&5
+echo "configure:2197: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1885,7 +2233,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1889: checking for a BSD compatible install" >&5
+echo "configure:2237: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1938,7 +2286,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1942: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2290: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1967,7 +2315,7 @@ fi
 
 # Sanity check for the cross-compilation case:
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1971: checking how to run the C preprocessor" >&5
+echo "configure:2319: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1982,13 +2330,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1986 "configure"
+#line 2334 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1992: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1999,13 +2347,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2003 "configure"
+#line 2351 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2016,13 +2364,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2020 "configure"
+#line 2368 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2048,17 +2396,17 @@ echo "$ac_t""$CPP" 1>&6
 
 ac_safe=`echo "stdio.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for stdio.h""... $ac_c" 1>&6
-echo "configure:2052: checking for stdio.h" >&5
+echo "configure:2400: checking for stdio.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2057 "configure"
+#line 2405 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2410: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2086,12 +2434,12 @@ fi
 
 
 echo $ac_n "checking for built-in g77 integer types""... $ac_c" 1>&6
-echo "configure:2090: checking for built-in g77 integer types" >&5
+echo "configure:2438: checking for built-in g77 integer types" >&5
 if eval "test \"`echo '$''{'libf2c_cv_has_g77_builtin_types'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2095 "configure"
+#line 2443 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2101,7 +2449,7 @@ __g77_longint g77l;
 __g77_ulongint g77ul;
 ; return 0; }
 EOF
-if { (eval echo configure:2105: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2453: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   libf2c_cv_has_g77_builtin_types=yes
 else
@@ -2127,107 +2475,6 @@ test -f libF77/makefile && mv libF77/makefile  libF77/makefile.ori
 test -f libI77/makefile && mv libI77/makefile  libI77/makefile.ori
 test -f libU77/makefile && mv libU77/makefile  libU77/makefile.ori
 
-# Get the version trigger filename from the toplevel
-if [ "${with_gcc_version_trigger+set}" = set ]; then
-	gcc_version_trigger=$with_gcc_version_trigger
-	gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
-else
-	gcc_version_trigger=
-	gcc_version=UNKNOWN
-fi
-
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:2170: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:2191: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:2209: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
 subdirs="libU77 libI77 libF77"
 
 # Do Makefile first since g2c.h depends on it and shouldn't get an
@@ -2378,36 +2625,43 @@ s%@includedir@%$includedir%g
 s%@oldincludedir@%$oldincludedir%g
 s%@infodir@%$infodir%g
 s%@mandir@%$mandir%g
-s%@EXEEXT@%$EXEEXT%g
-s%@CC@%$CC%g
 s%@host@%$host%g
 s%@host_alias@%$host_alias%g
 s%@host_cpu@%$host_cpu%g
 s%@host_vendor@%$host_vendor%g
 s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
 s%@build@%$build%g
 s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
+s%@toplevel_srcdir@%$toplevel_srcdir%g
+s%@glibcpp_builddir@%$glibcpp_builddir%g
+s%@glibcpp_srcdir@%$glibcpp_srcdir%g
 s%@LN_S@%$LN_S%g
-s%@OBJEXT@%$OBJEXT%g
-s%@RANLIB@%$RANLIB%g
-s%@STRIP@%$STRIP%g
-s%@LIBTOOL@%$LIBTOOL%g
+s%@CC@%$CC%g
+s%@AS@%$AS%g
 s%@AR@%$AR%g
+s%@RANLIB@%$RANLIB%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
 s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CPP@%$CPP%g
+s%@EXEEXT@%$EXEEXT%g
 s%@gcc_version@%$gcc_version%g
 s%@gcc_version_trigger@%$gcc_version_trigger%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
+s%@glibcpp_prefixdir@%$glibcpp_prefixdir%g
+s%@glibcpp_toolexecdir@%$glibcpp_toolexecdir%g
+s%@glibcpp_toolexeclibdir@%$glibcpp_toolexeclibdir%g
+s%@OBJEXT@%$OBJEXT%g
+s%@STRIP@%$STRIP%g
+s%@LIBTOOL@%$LIBTOOL%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@CPP@%$CPP%g
 s%@subdirs@%$subdirs%g
 
 CEOF
@@ -2517,8 +2771,8 @@ target=${target}
 with_target_subdir=${with_target_subdir}
 with_multisubdir=${with_multisubdir}
 ac_configure_args="--enable-multilib ${ac_configure_args}"
+toplevel_srcdir=${toplevel_srcdir}
 CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-topsrcdir=${topsrcdir}
 
 EOF
 cat >> $CONFIG_STATUS <<\EOF
@@ -2527,7 +2781,7 @@ if test -n "$CONFIG_FILES"; then
   if test -n "${with_target_subdir}"; then
     # FIXME: We shouldn't need to set ac_file
     ac_file=Makefile
-    . ${topsrcdir}/config-ml.in
+    . ${toplevel_srcdir}/config-ml.in
     touch g2c.h   # to keep it more recent than Makefile
   fi
 fi