system.h (ENCODE_SECTION_INFO): Poison it.

	* system.h (ENCODE_SECTION_INFO): Poison it.
	* target-def.h (TARGET_ENCODE_SECTION_INFO): New.
	* target.h (encode_section_info): New.
	* varasm.c (make_decl_rtl, output_constant_def): Use it.
	* hooks.c (hook_tree_int_void): New.
	* hooks.h: Declare it.

	* config/darwin.h, config/alpha/alpha-protos.h, config/alpha/alpha.c,
	config/alpha/alpha.h, config/arm/pe.h, config/avr/avr-protos.h,
	config/avr/avr.c, config/avr/avr.h, config/c4x/c4x-protos.h,
	config/c4x/c4x.c, config/c4x/c4x.h, config/cris/cris-protos.h,
	config/cris/cris.c, config/cris/cris.h, config/i386/cygwin.h,
	config/i386/win32.h, config/ia64/ia64-protos.h, config/ia64/ia64.c,
	config/ia64/ia64.h, config/m32r/m32r-protos.h, config/m32r/m32r.c,
	config/m32r/m32r.h, config/m68hc11/m68hc11-protos.h,
	config/m68hc11/m68hc11.c, config/m68hc11/m68hc11.h,
	config/mcore/mcore-protos.h, config/mcore/mcore.c,
	config/mcore/mcore.h, config/mmix/mmix-protos.h, config/mmix/mmix.c,
	config/mmix/mmix.h, config/rs6000/rs6000-protos.h,
	config/rs6000/sysv4.h, config/stormy16/stormy16-protos.h,
	config/stormy16/stormy16.c, config/stormy16/stormy16.h:
	Replace ENCODE_SECTION_INFO with TARGET_ENCODE_SECTION_INFO
	referencing existing function.  Make function static.

	* config/a29k/a29k.c, config/a29k/a29k.h, config/arc/arc.c,
	config/arc/arc.h, config/arm/arm.c, config/arm/arm.h,
	config/h8300/h8300.c, config/h8300/h8300.h, config/i370/i370.c,
	config/i370/i370.h, config/i386/i386-interix.h, config/i386/i386.c,
	config/i386/i386.h, config/i386/interix.c, config/m88k/m88k.c,
	config/m88k/m88k.h, config/mips/mips.c, config/mips/mips.h,
	config/ns32k/ns32k.c, config/ns32k/ns32k.h, config/pa/pa.c,
	config/pa/pa.h, config/romp/romp.c, config/romp/romp.h,
	config/rs6000/linux64.h, config/rs6000/xcoff.h, config/s390/s390.c,
	config/s390/s390.h, config/sh/sh.c, config/sh/sh.h,
	config/sparc/sparc.c, config/sparc/sparc.h, config/v850/v850.c,
	config/v850/v850.h, config/vax/vax.c, config/vax/vms.h,
	config/xtensa/xtensa.c, config/xtensa/xtensa.h:
	Move ENCODE_SECTION_INFO to out-of-line function and add
	TARGET_ENCODE_SECTION_INFO.

	* config/darwin.h (ASM_DECLARE_FUNCTION_NAME): Use hook, not macro.
	(ASM_DECLARE_OBJECT_NAME, ASM_OUTPUT_ALIGNED_DECL_LOCAL): Likewise.

	* config/arm/pe.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS): Rename
	from SUBTARGET_*
	(switch_to_section): Replace in_rdata case with in_readonly_data.

	* config/h8300/h8300.c (h8300_encode_label): Make static.
	* config/h8300/h8300-protos.h: Update.

	* config/rs6000/rs6000.c (rs6000_elf_encode_section_info): Rename
	from rs6000_encode_section_info; make static.
	(rs6000_xcoff_encode_section_info): New.

	* config/v850/v850.c (v850_encode_data_area): Make static.
	* config/v850/v850-protos.h: Update.

	* config/vax/vax.c: Include flags.h.
	(vms_select_section): Fix typo.

	* doc/tm.texi (TARGET_ENCODE_SECTION_INFO): Update from previous
	ENCODE_SECTION_INFO docs.

From-SVN: r53606

1 files changed, 2 insertions, 60 deletions

diff --git a/gcc/config/fr30/fr30.h b/gcc/config/fr30/fr30.h
index 992788a04f6..2f0cf99561b 100644
--- a/gcc/config/fr30/fr30.h
+++ b/gcc/config/fr30/fr30.h
@@ -977,61 +977,7 @@ do										\
 
 /* A C compound statement with a conditional `goto LABEL;' executed if X (an
    RTX) is a legitimate memory address on the target machine for a memory
-   operand of mode MODE.
-
-   It usually pays to define several simpler macros to serve as subroutines for
-   this one.  Otherwise it may be too complicated to understand.
-
-   This macro must exist in two variants: a strict variant and a non-strict
-   one.  The strict variant is used in the reload pass.  It must be defined so
-   that any pseudo-register that has not been allocated a hard register is
-   considered a memory reference.  In contexts where some kind of register is
-   required, a pseudo-register with no hard register must be rejected.
-
-   The non-strict variant is used in other passes.  It must be defined to
-   accept all pseudo-registers in every context where some kind of register is
-   required.
-
-   Compiler source files that want to use the strict variant of this macro
-   define the macro `REG_OK_STRICT'.  You should use an `#ifdef REG_OK_STRICT'
-   conditional to define the strict variant in that case and the non-strict
-   variant otherwise.
-
-   Subroutines to check for acceptable registers for various purposes (one for
-   base registers, one for index registers, and so on) are typically among the
-   subroutines used to define `GO_IF_LEGITIMATE_ADDRESS'.  Then only these
-   subroutine macros need have two variants; the higher levels of macros may be
-   the same whether strict or not.
-
-   Normally, constant addresses which are the sum of a `symbol_ref' and an
-   integer are stored inside a `const' RTX to mark them as constant.
-   Therefore, there is no need to recognize such sums specifically as
-   legitimate addresses.  Normally you would simply recognize any `const' as
-   legitimate.
-
-   Usually `PRINT_OPERAND_ADDRESS' is not prepared to handle constant sums that
-   are not marked with `const'.  It assumes that a naked `plus' indicates
-   indexing.  If so, then you *must* reject such naked constant sums as
-   illegitimate addresses, so that none of them will be given to
-   `PRINT_OPERAND_ADDRESS'.
-
-   On some machines, whether a symbolic address is legitimate depends on the
-   section that the address refers to.  On these machines, define the macro
-   `ENCODE_SECTION_INFO' to store the information into the `symbol_ref', and
-   then check for it here.  When you see a `const', you will have to look
-   inside it to find the `symbol_ref' in order to determine the section.
-
-   The best way to modify the name string is by adding text to the beginning,
-   with suitable punctuation to prevent any ambiguity.  Allocate the new name
-   in `saveable_obstack'.  You will have to modify `ASM_OUTPUT_LABELREF' to
-   remove and decode the added text and output the name accordingly, and define
-   `STRIP_NAME_ENCODING' to access the original name string.
-
-   You can check the information stored here into the `symbol_ref' in the
-   definitions of the macros `GO_IF_LEGITIMATE_ADDRESS' and
-   `PRINT_OPERAND_ADDRESS'.
-
-   Used in explow.c, recog.c, reload.c.  */
+   operand of mode MODE.  */
 
 /* On the FR30 we only have one real addressing mode - an address in a
    register.  There are three special cases however:
@@ -1293,12 +1239,8 @@ do										\
 
 /* A C compound statement to output to stdio stream STREAM the assembler syntax
    for an instruction operand that is a memory reference whose address is X.  X
-   is an RTL expression.
+   is an RTL expression.  */
 
-   On some machines, the syntax for a symbolic address depends on the section
-   that the address refers to.  On these machines, define the macro
-   `ENCODE_SECTION_INFO' to store the information into the `symbol_ref', and
-   then check for it here.  *Note Assembler Format::.  */
 #define PRINT_OPERAND_ADDRESS(STREAM, X) fr30_print_operand_address (STREAM, X)
 
 /* If defined, C string expressions to be used for the `%R', `%L', `%U', and