* configure.in: Remove Makefile in build, host and target modules

unless configure was run with --no-recursion.
* configure: Rebuilt.


git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@61126 138bc75d-0d04-0410-961f-82ee72b054a4

3 files changed, 113 insertions, 74 deletions

diff --git a/ChangeLog b/ChangeLog
index f8ab6a4aca7..970fd5a91ed 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,9 @@
+2003-01-09  Alexandre Oliva  <aoliva@redhat.com>
+
+	* configure.in: Remove Makefile in build, host and target modules
+	unless configure was run with --no-recursion.
+	* configure: Rebuilt.
+
 2003-01-09  Christian Cornelssen  <ccorn@cs.tu-berlin.de>
 
 	* Makefile.tpl (BASE_FLAGS_TO_PASS): Also pass DESTDIR.
diff --git a/configure b/configure
index 55b400dc870..f85cbce2fc5 100755
--- a/configure
+++ b/configure
@@ -1525,20 +1525,6 @@ if test -n "${target_configdirs}" ; then
   fi
 fi
 
-# Deconfigure all subdirectories, in case we are changing the
-# configuration from one where a subdirectory is supported to one where it
-# is not.
-if test -z "${norecursion}" && test -n "${configdirs}" ; then
-  for i in `echo ${configdirs} | sed -e s/target-//g` ; do
-    rm -f $i/Makefile
-  done
-fi
-if test -z "${norecursion}" && test -n "${target_configdirs}" ; then
-  for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
-    rm -f ${target_subdir}/$i/Makefile
-  done
-fi
-
 # Quietly strip out all directories which aren't configurable in this tree.
 # This relies on all configurable subdirectories being autoconfiscated, which
 # is now the case.
@@ -2325,13 +2311,24 @@ target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
 # This is the final value for target_configdirs.  configdirs already
 # has its final value.  It's time to create some lists of valid targets.
 
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, such that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
 all_build_modules=
 configure_build_modules=
 # Only make build modules if build != host.
 # This should be done more generally, but at the moment it doesn't matter.
 if test ${host_alias} != ${build_alias} ; then
-  all_build_modules=all-build-libiberty
-  configure_build_modules=configure-build-libiberty
+  for module in libiberty ; do
+    all_build_modules=all-build-${module}
+    configure_build_modules=configure-build-${module}
+    if test -z "${no_recursion}" \
+       && test -f ${build_subdir}/${module}/Makefile; then
+      echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+      rm -f ${build_subdir}/${module}/Makefile
+    fi
+  done
 fi
 
 all_host_modules=
@@ -2343,6 +2340,11 @@ for module in ${configdirs} ; do
   check_host_modules="${check_host_modules} check-${module}"
   install_host_modules="${install_host_modules} install-${module}"
   configure_host_modules="${configure_host_modules} configure-${module}"
+  if test -z "${no_recursion}" \
+     && test -f ${module}/Makefile; then
+    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+    rm -f ${module}/Makefile
+  fi
 done
 install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
 
@@ -2355,6 +2357,11 @@ for module in ${target_configdirs} ; do
   check_target_modules="${check_target_modules} check-target-${module}"
   install_target_modules="${install_target_modules} install-target-${module}"
   configure_target_modules="${configure_target_modules} configure-target-${module}"
+  if test -z "${no_recursion}" \
+     && test -f ${target_subdir}/${module}/Makefile; then
+    echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+    rm -f ${target_subdir}/${module}/Makefile
+  fi
 done
 
 # Determine whether gdb needs tk/tcl or not.
@@ -2726,7 +2733,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2730: checking for $ac_word" >&5
+echo "configure:2737: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2759,7 +2766,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2763: checking for $ac_word" >&5
+echo "configure:2770: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2798,7 +2805,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2802: checking for $ac_word" >&5
+echo "configure:2809: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2831,7 +2838,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2835: checking for $ac_word" >&5
+echo "configure:2842: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2870,7 +2877,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2874: checking for $ac_word" >&5
+echo "configure:2881: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2903,7 +2910,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2907: checking for $ac_word" >&5
+echo "configure:2914: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2942,7 +2949,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2946: checking for $ac_word" >&5
+echo "configure:2953: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2975,7 +2982,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2979: checking for $ac_word" >&5
+echo "configure:2986: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3014,7 +3021,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3018: checking for $ac_word" >&5
+echo "configure:3025: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3047,7 +3054,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3051: checking for $ac_word" >&5
+echo "configure:3058: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3086,7 +3093,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3090: checking for $ac_word" >&5
+echo "configure:3097: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3119,7 +3126,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3123: checking for $ac_word" >&5
+echo "configure:3130: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3158,7 +3165,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3162: checking for $ac_word" >&5
+echo "configure:3169: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3191,7 +3198,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3195: checking for $ac_word" >&5
+echo "configure:3202: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3230,7 +3237,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3234: checking for $ac_word" >&5
+echo "configure:3241: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3263,7 +3270,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3267: checking for $ac_word" >&5
+echo "configure:3274: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3302,7 +3309,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3306: checking for $ac_word" >&5
+echo "configure:3313: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3335,7 +3342,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3339: checking for $ac_word" >&5
+echo "configure:3346: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3383,7 +3390,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3387: checking for $ac_word" >&5
+echo "configure:3394: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3416,7 +3423,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3420: checking for $ac_word" >&5
+echo "configure:3427: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3455,7 +3462,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3459: checking for $ac_word" >&5
+echo "configure:3466: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3488,7 +3495,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3492: checking for $ac_word" >&5
+echo "configure:3499: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3527,7 +3534,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3531: checking for $ac_word" >&5
+echo "configure:3538: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3560,7 +3567,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3564: checking for $ac_word" >&5
+echo "configure:3571: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3599,7 +3606,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3603: checking for $ac_word" >&5
+echo "configure:3610: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3632,7 +3639,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3636: checking for $ac_word" >&5
+echo "configure:3643: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3671,7 +3678,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3675: checking for $ac_word" >&5
+echo "configure:3682: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3704,7 +3711,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3708: checking for $ac_word" >&5
+echo "configure:3715: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3743,7 +3750,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3747: checking for $ac_word" >&5
+echo "configure:3754: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3776,7 +3783,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3780: checking for $ac_word" >&5
+echo "configure:3787: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3815,7 +3822,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3819: checking for $ac_word" >&5
+echo "configure:3826: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3848,7 +3855,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3852: checking for $ac_word" >&5
+echo "configure:3859: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3980,15 +3987,34 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*([^)]*)\)[ 	]*\(.*\),-D\1=\2,g
+t quote
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ 	`~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output.  A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
 
 
 # Without the "./", some shells look in PATH for config.status.
diff --git a/configure.in b/configure.in
index d427bbfae6b..88150ed6602 100644
--- a/configure.in
+++ b/configure.in
@@ -1,5 +1,5 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-#   1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+#   1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -868,20 +868,6 @@ if test -n "${target_configdirs}" ; then
   fi
 fi
 
-# Deconfigure all subdirectories, in case we are changing the
-# configuration from one where a subdirectory is supported to one where it
-# is not.
-if test -z "${norecursion}" && test -n "${configdirs}" ; then
-  for i in `echo ${configdirs} | sed -e s/target-//g` ; do
-    rm -f $i/Makefile
-  done
-fi
-if test -z "${norecursion}" && test -n "${target_configdirs}" ; then
-  for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
-    rm -f ${target_subdir}/$i/Makefile
-  done
-fi
-
 # Quietly strip out all directories which aren't configurable in this tree.
 # This relies on all configurable subdirectories being autoconfiscated, which
 # is now the case.
@@ -1668,13 +1654,24 @@ target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
 # This is the final value for target_configdirs.  configdirs already
 # has its final value.  It's time to create some lists of valid targets.
 
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, such that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
+
 all_build_modules=
 configure_build_modules=
 # Only make build modules if build != host.
 # This should be done more generally, but at the moment it doesn't matter.
 if test ${host_alias} != ${build_alias} ; then
-  all_build_modules=all-build-libiberty
-  configure_build_modules=configure-build-libiberty
+  for module in libiberty ; do
+    all_build_modules=all-build-${module}
+    configure_build_modules=configure-build-${module}
+    if test -z "${no_recursion}" \
+       && test -f ${build_subdir}/${module}/Makefile; then
+      echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+      rm -f ${build_subdir}/${module}/Makefile
+    fi
+  done
 fi
 
 all_host_modules=
@@ -1686,6 +1683,11 @@ for module in ${configdirs} ; do
   check_host_modules="${check_host_modules} check-${module}"
   install_host_modules="${install_host_modules} install-${module}"
   configure_host_modules="${configure_host_modules} configure-${module}"
+  if test -z "${no_recursion}" \
+     && test -f ${module}/Makefile; then
+    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+    rm -f ${module}/Makefile
+  fi
 done
 install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
 
@@ -1698,6 +1700,11 @@ for module in ${target_configdirs} ; do
   check_target_modules="${check_target_modules} check-target-${module}"
   install_target_modules="${install_target_modules} install-target-${module}"
   configure_target_modules="${configure_target_modules} configure-target-${module}"
+  if test -z "${no_recursion}" \
+     && test -f ${target_subdir}/${module}/Makefile; then
+    echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+    rm -f ${target_subdir}/${module}/Makefile
+  fi
 done
 
 # Determine whether gdb needs tk/tcl or not.