diff options
Diffstat (limited to 'FreeRTOS/Demo/Safe_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/clock_config.c')
| -rw-r--r-- | FreeRTOS/Demo/Safe_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/clock_config.c | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/Safe_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/clock_config.c b/FreeRTOS/Demo/Safe_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/clock_config.c new file mode 100644 index 000000000..bbf3d05f6 --- /dev/null +++ b/FreeRTOS/Demo/Safe_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/clock_config.c @@ -0,0 +1,367 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to set up clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v8.0 +processor: LPC55S69 +package_id: LPC55S69JBD100 +mcu_data: ksdk2_0 +processor_version: 10.0.0 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_power.h" +#include "fsl_clock.h" +#include "clock_config.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +extern uint32_t SystemCoreClock; + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockPLL150M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: System_clock.outFreq, value: 12 MHz} +settings: +- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable} +sources: +- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */ + + POWER_SetVoltageForFreq(12000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(12000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO12M */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************* Configuration BOARD_BootClockFROHF96M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFROHF96M +outputs: +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable} +- {id: SYSCON.MAINCLKSELA.sel, value: ANACTRL.fro_hf_clk} +sources: +- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFROHF96M configuration + ******************************************************************************/ +void BOARD_BootClockFROHF96M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */ + + POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKFROHF96M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL100M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL100M +outputs: +- {id: System_clock.outFreq, value: 100 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: ANALOG_CONTROL_FRO192M_CTRL_ENDI_FRO_96M_CFG, value: Enable} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0M_MULT.scale, value: '100', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '4', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '4', locked: true} +sources: +- {id: ANACTRL.fro_hf.outFreq, value: 96 MHz} +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL100M configuration + ******************************************************************************/ +void BOARD_BootClockPLL100M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + CLOCK_SetupFROClocking(96000000U); /* Enable FRO HF(96MHz) output */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + + POWER_SetVoltageForFreq(100000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(100000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(26U), + .pllndec = SYSCON_PLL0NDEC_NDIV(4U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(2U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(100U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 100000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockPLL150M ********************* + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL150M +called_from_default_init: true +outputs: +- {id: System_clock.outFreq, value: 150 MHz} +settings: +- {id: PLL0_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL0_BYPASS} +- {id: SYSCON.PLL0CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL0M_MULT.scale, value: '150', locked: true} +- {id: SYSCON.PLL0N_DIV.scale, value: '8', locked: true} +- {id: SYSCON.PLL0_PDEC.scale, value: '2', locked: true} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL150M configuration + ******************************************************************************/ +void BOARD_BootClockPLL150M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + + POWER_SetVoltageForFreq(150000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(150000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL */ + CLOCK_AttachClk(kEXT_CLK_to_PLL0); /*!< Switch PLL0CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0); /* Ensure PLL is on */ + POWER_DisablePD(kPDRUNCFG_PD_PLL0_SSCG); + const pll_setup_t pll0Setup = { + .pllctrl = SYSCON_PLL0CTRL_CLKEN_MASK | SYSCON_PLL0CTRL_SELI(53U) | SYSCON_PLL0CTRL_SELP(31U), + .pllndec = SYSCON_PLL0NDEC_NDIV(8U), + .pllpdec = SYSCON_PLL0PDEC_PDIV(1U), + .pllsscg = {0x0U,(SYSCON_PLL0SSCG1_MDIV_EXT(150U) | SYSCON_PLL0SSCG1_SEL_EXT_MASK)}, + .pllRate = 150000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL0Freq(&pll0Setup); /*!< Configure PLL0 to the desired values */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL0_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL0 */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK; +#endif +} + +/******************************************************************************* + ******************* Configuration BOARD_BootClockPLL1_150M ******************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockPLL1_150M +outputs: +- {id: System_clock.outFreq, value: 150 MHz} +settings: +- {id: PLL1_Mode, value: Normal} +- {id: ENABLE_CLKIN_ENA, value: Enabled} +- {id: ENABLE_SYSTEM_CLK_OUT, value: Enabled} +- {id: SYSCON.MAINCLKSELB.sel, value: SYSCON.PLL1_BYPASS} +- {id: SYSCON.PLL1CLKSEL.sel, value: SYSCON.CLK_IN_EN} +- {id: SYSCON.PLL1M_MULT.scale, value: '150', locked: true} +- {id: SYSCON.PLL1N_DIV.scale, value: '8', locked: true} +- {id: SYSCON.PLL1_PDEC.scale, value: '2', locked: true} +sources: +- {id: SYSCON.XTAL32M.outFreq, value: 16 MHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockPLL1_150M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockPLL1_150M configuration + ******************************************************************************/ +void BOARD_BootClockPLL1_150M(void) +{ +#ifndef SDK_SECONDARY_CORE + /*!< Set up the clock sources */ + /*!< Configure FRO192M */ + POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ + CLOCK_SetupFROClocking(12000000U); /*!< Set up FRO to the 12 MHz, just for sure */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change the clock setting */ + + /*!< Configure XTAL32M */ + POWER_DisablePD(kPDRUNCFG_PD_XTAL32M); /* Ensure XTAL32M is powered */ + POWER_DisablePD(kPDRUNCFG_PD_LDOXO32M); /* Ensure XTAL32M is powered */ + CLOCK_SetupExtClocking(16000000U); /* Enable clk_in clock */ + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK; /* Enable clk_in from XTAL32M clock */ + ANACTRL->XO32M_CTRL |= ANACTRL_XO32M_CTRL_ENABLE_SYSTEM_CLK_OUT_MASK; /* Enable clk_in to system */ + + POWER_SetVoltageForFreq(150000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(150000000U); /*!< Set FLASH wait states for core */ + + /*!< Set up PLL1 */ + CLOCK_AttachClk(kEXT_CLK_to_PLL1); /*!< Switch PLL1CLKSEL to EXT_CLK */ + POWER_DisablePD(kPDRUNCFG_PD_PLL1); /* Ensure PLL is on */ + const pll_setup_t pll1Setup = { + .pllctrl = SYSCON_PLL1CTRL_CLKEN_MASK | SYSCON_PLL1CTRL_SELI(53U) | SYSCON_PLL1CTRL_SELP(31U), + .pllndec = SYSCON_PLL1NDEC_NDIV(8U), + .pllpdec = SYSCON_PLL1PDEC_PDIV(1U), + .pllmdec = SYSCON_PLL1MDEC_MDIV(150U), + .pllRate = 150000000U, + .flags = PLL_SETUPFLAG_WAITLOCK + }; + CLOCK_SetPLL1Freq(&pll1Setup); /*!< Configure PLL1 to the desired values */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kPLL1_to_MAIN_CLK); /*!< Switch MAIN_CLK to PLL1 */ + + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKPLL1_150M_CORE_CLOCK; +#endif +} + |