diff options
Diffstat (limited to 'lib/common_test/test_server/configure.ac')
| -rw-r--r-- | lib/common_test/test_server/configure.ac | 509 |
1 files changed, 509 insertions, 0 deletions
diff --git a/lib/common_test/test_server/configure.ac b/lib/common_test/test_server/configure.ac new file mode 100644 index 0000000000..da5c1b1608 --- /dev/null +++ b/lib/common_test/test_server/configure.ac @@ -0,0 +1,509 @@ +dnl Process this file with autoconf to produce a configure script for Erlang. +dnl +dnl %CopyrightBegin% +dnl +dnl Copyright Ericsson AB 1997-2021. All Rights Reserved. +dnl +dnl Licensed under the Apache License, Version 2.0 (the "License"); +dnl you may not use this file except in compliance with the License. +dnl You may obtain a copy of the License at +dnl +dnl http://www.apache.org/licenses/LICENSE-2.0 +dnl +dnl Unless required by applicable law or agreed to in writing, software +dnl distributed under the License is distributed on an "AS IS" BASIS, +dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +dnl See the License for the specific language governing permissions and +dnl limitations under the License. +dnl +dnl %CopyrightEnd% +dnl + +AC_INIT +AC_CONFIG_SRCDIR([conf_vars.in]) +AC_PREREQ([2.71]) + +AC_CANONICAL_HOST + +dnl Checks for programs. +AC_PROG_CC + +DEBUG_FLAGS="-g -DDEBUG" +if test "$GCC" = yes; then + DEBUG_FLAGS="$DEBUG_FLAGS -Wall $CFLAGS" +fi +AC_SUBST(DEBUG_FLAGS) + +AC_ARG_ENABLE(debug-mode, +[ --enable-debug-mode enable debug mode], +[ case "$enableval" in + no) ;; + *) CFLAGS=$DEBUG_FLAGS ;; + esac ], ) + +AC_ARG_ENABLE(m64-build, +AS_HELP_STRING([--enable-m64-build], + [build 64-bit binaries using the -m64 flag to (g)cc]), +[ case "$enableval" in + no) enable_m64_build=no ;; + *) enable_m64_build=yes ;; + esac +],enable_m64_build=no) + +AC_ARG_ENABLE(m32-build, +AS_HELP_STRING([--enable-m32-build], + [build 32-bit binaries using the -m32 flag to (g)cc]), +[ case "$enableval" in + no) enable_m32_build=no ;; + *) enable_m32_build=yes ;; + esac +],enable_m32_build=no) + +no_mXX_LDFLAGS="$LDFLAGS" + +if test X${enable_m64_build} = Xyes; then + CFLAGS="-m64 $CFLAGS" + LDFLAGS="-m64 $LDFLAGS" +fi +if test X${enable_m32_build} = Xyes; then + CFLAGS="-m32 $CFLAGS" + LDFLAGS="-m32 $LDFLAGS" +fi + +AC_CHECK_LIB(m, sin) + +#-------------------------------------------------------------------- +# Interactive UNIX requires -linet instead of -lsocket, plus it +# needs net/errno.h to define the socket-related error codes. +#-------------------------------------------------------------------- + +AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) +AC_CHECK_HEADER(net/errno.h, AC_DEFINE(HAVE_NET_ERRNO_H)) + +#-------------------------------------------------------------------- +# Linux/tcp.h may be needed for sockopt test in kernel +#-------------------------------------------------------------------- + +AC_CHECK_HEADER(linux/tcp.h, AC_DEFINE(HAVE_LINUX_TCP_H)) +AC_MSG_CHECKING(for sane linux/tcp.h) +AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <stdio.h> + #include <stdlib.h> + #include <string.h> + #include <unistd.h> + #include <stdarg.h> + #include <sys/types.h> + #include <sys/socket.h> + #include <sys/wait.h> + #include <linux/tcp.h> + #include <netinet/in.h> + #include <netdb.h>]], [[return 0;]])],[have_sane_linux_tcp_h=yes],[have_sane_linux_tcp_h=no]) + +if test $have_sane_linux_tcp_h = yes; then + AC_DEFINE(HAVE_SANE_LINUX_TCP_H,[1], + [Define if we have sane linux/tcp.h]) + AC_MSG_RESULT(yes) +else + AC_MSG_RESULT(no) +fi + + + +#-------------------------------------------------------------------- +# Linux requires sys/socketio.h instead of sys/sockio.h +#-------------------------------------------------------------------- +AC_CHECK_HEADER(sys/socketio.h, AC_DEFINE(HAVE_SOCKETIO_H)) + + +#-------------------------------------------------------------------- +# Misc +#-------------------------------------------------------------------- +AC_CHECK_HEADER(poll.h, AC_DEFINE(HAVE_POLL_H)) + +#-------------------------------------------------------------------- +# The statements below define a collection of symbols related to +# dynamic loading and shared libraries: +# +# SHLIB_CFLAGS - Flags to pass to cc when compiling the components +# of a shared library (may request position-independent +# code, among other things). +# SHLIB_LD - Base command to use for combining object files +# into a shared library. +# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable +# extensions. An empty string means we don't know how +# to use shared libraries on this platform. +#-------------------------------------------------------------------- + +# Step 1: set the variable "system" to hold the name and version number +# for the system. + +AC_MSG_CHECKING([system version (for dynamic loading)]) +system=`./config.sub $host` +AC_MSG_RESULT($system) + +# Step 2: check for existence of -ldl library. This is needed because +# Linux can use either -ldl or -ldld for dynamic loading. + +AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) + +# Step 3: set configuration options based on system name and version. + +SHLIB_LDLIBS= +fullSrcDir=`cd $srcdir; pwd` +AS_CASE([$system], + + [*-linux-*], + [ + SHLIB_CFLAGS="-fPIC" + SHLIB_SUFFIX=".so" + if test "$have_dl" = yes; then + SHLIB_LD="${CC}" + SHLIB_LDFLAGS="$LDFLAGS -shared" + LD_FLAGS="-rdynamic" + else + AC_CHECK_HEADER(dld.h, [ + SHLIB_LD="ld" + SHLIB_LDFLAGS="-shared"]) + if test X${enable_m64_build} = Xyes; then + AC_MSG_ERROR(don't know how to link 64-bit dynamic drivers) + fi + if test X${enable_m32_build} = Xyes; then + AC_MSG_ERROR(don't know how to link 32-bit dynamic drivers) + fi + fi + SHLIB_EXTRACT_ALL="" + ], + + [*-openbsd*|*-netbsd*|*-freebsd*|*-dragonfly*], + [ + # Not available on all versions: check for include file. + AC_CHECK_HEADER(dlfcn.h, [ + SHLIB_CFLAGS="-fpic" + SHLIB_LD="${CC}" + SHLIB_LDFLAGS="$LDFLAGS -shared" + SHLIB_SUFFIX=".so" + if test X${enable_m64_build} = Xyes; then + AC_MSG_ERROR(don't know how to link 64-bit dynamic drivers) + fi + if test X${enable_m32_build} = Xyes; then + AC_MSG_ERROR(don't know how to link 32-bit dynamic drivers) + fi + ], [ + # No dynamic loading. + SHLIB_CFLAGS="" + SHLIB_LD="ld" + SHLIB_LDFLAGS="" + SHLIB_SUFFIX="" + AC_MSG_ERROR(don't know how to compile and link dynamic drivers) + ]) + SHLIB_EXTRACT_ALL="" + ], + + [*-solaris2*|*-sysv4*], + [ + SHLIB_CFLAGS="-KPIC" + SHLIB_LD="/usr/ccs/bin/ld" + SHLIB_LDFLAGS="$no_mXX_LDFLAGS -G -z text" + if test X${enable_m64_build} = Xyes; then + SHLIB_LDFLAGS="-64 $SHLIB_LDFLAGS" + fi + if test X${enable_m32_build} = Xyes; then + AC_MSG_ERROR(don't know how to link 32-bit dynamic drivers) + fi + SHLIB_SUFFIX=".so" + SHLIB_EXTRACT_ALL="-z allextract" + ], + + [*darwin*], + [ + SHLIB_CFLAGS="-fno-common" + SHLIB_LD="cc" + SHLIB_LDFLAGS="$LDFLAGS -bundle -flat_namespace -undefined suppress" + SHLIB_SUFFIX=".so" + SHLIB_EXTRACT_ALL="" + ], + + [*osf1*], + [ + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld" + SHLIB_LDFLAGS="$LDFLAGS -shared" + if test X${enable_m64_build} = Xyes; then + AC_MSG_ERROR(don't know how to link 64-bit dynamic drivers) + fi + if test X${enable_m32_build} = Xyes; then + AC_MSG_ERROR(don't know how to link 32-bit dynamic drivers) + fi + SHLIB_SUFFIX=".so" + SHLIB_EXTRACT_ALL="" + ], + + [*osf5*], + [ + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -shared" + SHLIB_LDFLAGS="$LDFLAGS" + SHLIB_SUFFIX=".so" + SHLIB_EXTRACT_ALL="" + ], + + [ + # No dynamic loading. + SHLIB_CFLAGS="" + SHLIB_LD="ld" + SHLIB_LDFLAGS="" + SHLIB_LDLIBS="" + SHLIB_SUFFIX="" + SHLIB_EXTRACT_ALL="" + AC_MSG_ERROR(don't know how to compile and link dynamic drivers) + ]) + +# If we're running gcc, then change the C flags for compiling shared +# libraries to the right flags for gcc, instead of those for the +# standard manufacturer compiler. + +if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then + case $system in + *-aix) + ;; + *-bsd*) + ;; + *-irix) + ;; + *-netbsd|*-freebsd|*-openbsd) + ;; + *-riscos) + ;; + *ultrix4.*) + ;; + *darwin*) + ;; + *) + SHLIB_CFLAGS="-fPIC" + ;; + esac +fi + +# Make it possible for erl_interface to use it's own compiler options +EI_CFLAGS="$CFLAGS" + +# Add thread-safety flags if requested +AC_ARG_ENABLE(shlib-thread-safety, +[ --enable-shlib-thread-safety enable thread safety for build shared libraries], +[ case "$enableval" in + no) ;; + *) SHLIB_CFLAGS="$SHLIB_CFLAGS -D_THREAD_SAFE -D_REENTRANT" + CFLAGS="$CFLAGS -D_THREAD_SAFE -D_REENTRANT" + ;; + esac ], ) + +SHLIB_CFLAGS="$SHLIB_CFLAGS $CFLAGS" + + +AC_SUBST(CFLAGS) +AC_SUBST(SHLIB_LD) +AC_SUBST(SHLIB_LDFLAGS) +AC_SUBST(SHLIB_LDLIBS) +AC_SUBST(SHLIB_CFLAGS) +AC_SUBST(SHLIB_SUFFIX) +AC_SUBST(SHLIB_EXTRACT_ALL) +AC_SUBST(EI_CFLAGS) + +#-------------------------------------------------------------------- +# Check for the existence of the -lsocket and -lnsl libraries. +# The order here is important, so that they end up in the right +# order in the command line generated by make. Here are some +# special considerations: +# 1. Use "connect" and "accept" to check for -lsocket, and +# "gethostbyname" to check for -lnsl. +# 2. Use each function name only once: can't redo a check because +# autoconf caches the results of the last check and won't redo it. +# 3. Use -lnsl and -lsocket only if they supply procedures that +# aren't already present in the normal libraries. This is because +# IRIX 5.2 has libraries, but they aren't needed and they're +# bogus: they goof up name resolution if used. +# 4. On some SVR4 systems, can't use -lsocket without -lnsl too. +# To get around this problem, check for both libraries together +# if -lsocket doesn't work by itself. +#-------------------------------------------------------------------- + +erl_checkBoth=0 +AC_CHECK_FUNC(connect, erl_checkSocket=0, erl_checkSocket=1) +AS_IF([test "$erl_checkSocket" = 1], + [ + AC_CHECK_LIB(socket, main, LIBS="$LIBS -lsocket", erl_checkBoth=1) + ]) +AS_IF([test "$erl_checkBoth" = 1], + [ + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + AC_CHECK_FUNC(accept, erl_checkNsl=0, [LIBS=$tk_oldLibs]) + ]) +AC_CHECK_FUNC(gethostbyname, , AC_CHECK_LIB(nsl, main, [LIBS="$LIBS -lnsl"])) + +dnl Checks for library functions. +AC_CHECK_FUNCS(strerror) +AC_CHECK_FUNCS(vsnprintf) +AC_CHECK_FUNCS(usleep) + +# First check if the library is available, then if we can choose between +# two versions of gethostbyname +AC_CHECK_LIB([resolv],[main],[],[],[])ac_cv_lib_resolv=ac_cv_lib_resolv_main + +AC_CHECK_LIB(resolv, res_gethostbyname,[AC_DEFINE(HAVE_RES_GETHOSTBYNAME,1)]) + +#-------------------------------------------------------------------- +# Check for isfinite +#-------------------------------------------------------------------- + +AC_MSG_CHECKING([for isfinite]) +AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <math.h>]], [[isfinite(0);]])],[have_isfinite=yes],[have_isfinite=no]) + +if test $have_isfinite = yes; then + AC_DEFINE(HAVE_ISFINITE,1) + AC_MSG_RESULT(yes) +else + AC_DEFINE(HAVE_FINITE,1) + AC_MSG_RESULT(no) +fi + +#-------------------------------------------------------------------- +# Emulator compatible flags (for drivers) +#-------------------------------------------------------------------- + +ERTS_CFLAGS=$CFLAGS +AC_SUBST(ERTS_CFLAGS) + +ERTS_LIBS=$LIBS +AC_SUBST(ERTS_LIBS) + +#-------------------------------------------------------------------- +# Special compiler macro to handle cross compiling +# (HCC) is used to compile tools run in the HOST environment +#-------------------------------------------------------------------- +HCC='$(CC)' +AC_SUBST(HCC) + +#-------------------------------------------------------------------- +# ld +#-------------------------------------------------------------------- +LD='$(CC) $(CFLAGS)' +AC_SUBST(LD) + +#-------------------------------------------------------------------- +# object file suffix +#-------------------------------------------------------------------- +obj='.o' +AC_SUBST(obj) + +#-------------------------------------------------------------------- +# executable file suffix +#-------------------------------------------------------------------- +exe='' +AC_SUBST(exe) + +#-------------------------------------------------------------------- +# wsl command (if on windows using wsl) +#-------------------------------------------------------------------- +wsl='' +AC_SUBST(wsl) + +#-------------------------------------------------------------------- +# flags when linking for cross platform targets (yet 'tis useful with +# native builds) +#-------------------------------------------------------------------- +CROSSLDFLAGS='' +AC_SUBST(CROSSLDFLAGS) + +dnl +dnl SSL and CRYPTO needs the library openSSL/ssleay +dnl +dnl Check flags --with-ssl, --without-ssl --with-ssl=PATH. +dnl If no option is given or --with-ssl is set without a path then we +dnl search for SSL libraries and header files in the standard locations. +dnl If set to --without-ssl we disable the use of SSL +dnl If set to --with-ssl=PATH we use that path as the prefix, i.e. we +dnl use "PATH/include" and "PATH/lib". + +AC_SUBST(SSLEAY_ROOT) +TARGET=$host + +# We search for SSL. First in the OTP team ClearCase standard location, +# then in the common OS standard locations +# No we do not. +SSL_APP=ssl +CRYPTO_APP=crypto +SSLEAY_ROOT=$TARGET +#for dir in /usr /usr/pkg /usr/local /usr/local/ssl /usr/lib/ssl /usr/ssl; do +# AC_CHECK_HEADER($dir/include/openssl/opensslv.h, +# ac_cv_openssl=yes, ac_cv_openssl=no) +# if test $ac_cv_openssl = yes ; then +# SSLEAY_ROOT="$dir" +# ssl_found=yes +# break +# fi +#done + +# Find a usable java compiler +# +# WARNING this code is copied from ERTS configure.in, and should be +# updated if that code changes. I hate duplicating code, but what +# can I do. +# +dnl ERL_TRY_LINK_JAVA(CLASSES, FUNCTION-BODY +dnl [ACTION_IF_FOUND [, ACTION-IF-NOT-FOUND]]) +dnl Freely inspired by AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[]])],[],[]). (Maybe better to create a +dnl AC_LANG_JAVA instead...) +AC_DEFUN(ERL_TRY_LINK_JAVA, +[java_link='$JAVAC conftest.java 1>&AS_MESSAGE_LOG_FD' +changequote(, )dnl +cat > conftest.java <<EOF +$1 +class conftest { public static void main(String[] args) { + $2 + ; return; }} +EOF +changequote([, ])dnl +AS_IF([AC_TRY_EVAL(java_link) && test -s conftest.class], + [ + ifelse([$3], , :, [rm -rf conftest* + $3]) + ], + [ + echo "configure: failed program was:" 1>&AS_MESSAGE_LOG_FD + cat conftest.java 1>&AS_MESSAGE_LOG_FD + echo "configure: PATH was $PATH" 1>&AS_MESSAGE_LOG_FD +ifelse([$4], , , [ rm -rf conftest* + $4 +])dnl + ]) +rm -f conftest*]) +dnl +AC_CHECK_PROGS(JAVAC, javac guavac gcj jikes bock) +AS_IF([test -n "$JAVAC"], + [ + dnl Make sure it's at least JDK 1.5 + AC_CACHE_CHECK(for JDK version 1.5, + ac_cv_prog_javac_ver_1_5, + [ERL_TRY_LINK_JAVA([], [for (String i : args);], + ac_cv_prog_javac_ver_1_5=yes, ac_cv_prog_javac_ver_1_5=no)]) + if test $ac_cv_prog_javac_ver_1_5 = no; then + unset -v JAVAC + fi + ]) +if test -n "$JAVAC"; then + AC_SUBST(JAVAC) + : +fi + +AC_CHECK_PROGS([make_command], [make gmake], [false]) +AC_SUBST(make_command) + +if test "$GCC" = yes; then + test_c_compiler="{gnuc, undefined}" +else + test_c_compiler="undefined" +fi +AC_SUBST(test_c_compiler) + +AC_CONFIG_FILES([conf_vars]) +AC_OUTPUT |