diff options
Diffstat (limited to 'doc/misc')
| -rw-r--r-- | doc/misc/ChangeLog.1 | 2 | ||||
| -rw-r--r-- | doc/misc/calc.texi | 13 | ||||
| -rw-r--r-- | doc/misc/cc-mode.texi | 2 | ||||
| -rw-r--r-- | doc/misc/erc.texi | 12 | ||||
| -rw-r--r-- | doc/misc/eshell.texi | 5 | ||||
| -rw-r--r-- | doc/misc/info.texi | 5 | ||||
| -rw-r--r-- | doc/misc/mh-e.texi | 2 | ||||
| -rw-r--r-- | doc/misc/sc.texi | 4 | ||||
| -rw-r--r-- | doc/misc/texinfo.tex | 177 |
9 files changed, 129 insertions, 93 deletions
diff --git a/doc/misc/ChangeLog.1 b/doc/misc/ChangeLog.1 index 1c5e7c1e2fd..cd3f599b934 100644 --- a/doc/misc/ChangeLog.1 +++ b/doc/misc/ChangeLog.1 @@ -6012,7 +6012,7 @@ (Built-in table editor): Document M-e and M-a navigate inside table field. (Stuck projects): Docment that projects identified as - un-stuck will still be searchd for stuck sub-projects. + un-stuck will still be searched for stuck sub-projects. (Paragraphs): Document centering. (Creating timestamps, Agenda commands): Document new behavior when changing time stamps. diff --git a/doc/misc/calc.texi b/doc/misc/calc.texi index 89a340e7343..e5bac25cac8 100644 --- a/doc/misc/calc.texi +++ b/doc/misc/calc.texi @@ -11040,7 +11040,8 @@ the year even for older dates. The customizable variable have Calc's date forms switch from the Julian to Gregorian calendar at any specified date. -Today's timekeepers introduce an occasional ``leap second''. +A few platforms support leap seconds, such as the time stamp +1972-06-30 23:59:60 UTC, an extra second appended to June 1972. These do not occur regularly and Calc does not take these minor effects into account. (If it did, it would have to report a non-integer number of days between, say, @@ -17340,8 +17341,12 @@ it can be a variable which is a time zone name in upper- or lower-case. For example @samp{tzone(PST) = tzone(8)} and @samp{tzone(pdt) = tzone(7)} (for Pacific standard and daylight saving times, respectively). -North American and European time zone names are defined as follows; -note that for each time zone there is one name for standard time, +North American and European time zone names are defined as follows. +These names are obsolescent and new code should not rely on them: +the @samp{YST}-related names have disagreed with time in Yukon since 1973, +and other names could well become confusing or wrong in the future +as countries change their time zone rules. +For each time zone there is one name for standard time, another for daylight saving time, and a third for ``generalized'' time in which the daylight saving adjustment is computed from context. @@ -17363,7 +17368,7 @@ To define time zone names that do not appear in the above table, you must modify the Lisp variable @code{math-tzone-names}. This is a list of lists describing the different time zone names; its structure is best explained by an example. The three entries for -Pacific Time look like this: +circa-2022 US Pacific Time look like this: @smallexample @group diff --git a/doc/misc/cc-mode.texi b/doc/misc/cc-mode.texi index a8f5248c4c8..eee8463a0fa 100644 --- a/doc/misc/cc-mode.texi +++ b/doc/misc/cc-mode.texi @@ -7149,7 +7149,7 @@ If you add more directives to this variable, or remove directives from it, whilst ``indent to body'' is active, you need to re-enable the feature by calling @code{c-toggle-cpp-indent-to-body} for these changes to take effect@footnote{Note that the removal of directives -doesn't work satisfactorally on XEmacs or on very old versions of +doesn't work satisfactorily on XEmacs or on very old versions of Emacs}. @end defopt diff --git a/doc/misc/erc.texi b/doc/misc/erc.texi index 2ab2e908940..249b58c73d8 100644 --- a/doc/misc/erc.texi +++ b/doc/misc/erc.texi @@ -529,6 +529,16 @@ Translate morse code in messages @end table +@anchor{Required Modules} +@subheading Required Modules +@cindex required modules + +Note that some modules are essential to core IRC operations and thus +not listed above. You can nevertheless still remove these, but doing +so demands special precautions to avoid degrading the user experience. +At present, the only such module is @code{networks}, whose library ERC +always loads anyway. + @subheading Local Modules @cindex local modules @@ -1290,7 +1300,7 @@ When preparing entries for your backend, it may help to get a feel for how ERC and its modules conduct searches, especially when exploring a new context, such as channel keys. (Hint: in such situations, try temporarily setting the variable @code{auth-source-debug} to @code{t} -and checking @samp{*Messages*} periodically for insights into how +and checking @file{*Messages*} periodically for insights into how auth-source is operating.) Overall, though, ERC tries to be consistent in performing queries across various authentication contexts. Here's what to expect with respect to the @samp{host} diff --git a/doc/misc/eshell.texi b/doc/misc/eshell.texi index f9796d69a9a..118ee80acb9 100644 --- a/doc/misc/eshell.texi +++ b/doc/misc/eshell.texi @@ -2162,11 +2162,6 @@ So that @kbd{M-@key{DEL}} acts in a predictable manner, etc. @item Allow all Eshell buffers to share the same history and list-dir -@item There is a problem with script commands that output to @file{/dev/null} - -If a script file, somewhere in the middle, uses @samp{> /dev/null}, -output from all subsequent commands is swallowed. - @item Split up parsing of text after @samp{$} in @file{esh-var.el} Make it similar to the way that @file{esh-arg.el} is structured. diff --git a/doc/misc/info.texi b/doc/misc/info.texi index 4db35ebf0fc..84c4eeba4b5 100644 --- a/doc/misc/info.texi +++ b/doc/misc/info.texi @@ -1098,9 +1098,8 @@ name, and @key{RET}. Thus, @kbd{gTop@key{RET}} would go to the node called @samp{Top} in this file. (This is equivalent to @kbd{t}, see @ref{Help-Int}.) @kbd{gGo to node@key{RET}} would come back here. - Unlike @kbd{m}, @kbd{g} does not allow the use of abbreviations. -But it does allow completion, so you can type @key{TAB} to complete a -partial node name. + Like @kbd{m}, @kbd{g} allows the use of abbreviations. It also allows +completion, so you can type @key{TAB} to complete a partial node name. @cindex go to another Info file To go to a node in another file, you can include the file name in the diff --git a/doc/misc/mh-e.texi b/doc/misc/mh-e.texi index 1a80c62edba..0650ad69a8d 100644 --- a/doc/misc/mh-e.texi +++ b/doc/misc/mh-e.texi @@ -793,7 +793,7 @@ You should see the scan line for your message, and perhaps others. Use @cartouche @smallexample - 3 t08/24 root received fax files on Wed Aug 24 11:00:13 PDT 1 + 3 t08/24 root received fax files on Wed Aug 24 11:00:13 -0700 1 # 4+t08/24 To:wohler Test<<This is a test message to get the wheels -:%% @{+inbox/select@} 4 msgs (1-4) Bot L4 (MH-Folder Show)--------- diff --git a/doc/misc/sc.texi b/doc/misc/sc.texi index 3f6dcd022a5..49c86f68127 100644 --- a/doc/misc/sc.texi +++ b/doc/misc/sc.texi @@ -404,7 +404,7 @@ from the alist with the @code{sc-mail-field} function. Thus, if the following fields were present in the original article: @example -Date:@: 08 April 1991, 17:32:09 EST +Date:@: 08 Apr 1991 17:32:09 -0500 Subject:@: Better get out your asbestos suit @end example @@ -415,7 +415,7 @@ then, the following lisp constructs return: @example (sc-mail-field "date") -==> "08 April 1991, 17:32:09 EST" +==> "08 Apr 1991 17:32:09 -0500" (sc-mail-field "subject") ==> "Better get out your asbestos suit" diff --git a/doc/misc/texinfo.tex b/doc/misc/texinfo.tex index cfc77a84ea8..cfe83359f65 100644 --- a/doc/misc/texinfo.tex +++ b/doc/misc/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2022-11-12.22} +\def\texinfoversion{2022-12-19.22} % % Copyright 1985, 1986, 1988, 1990-2022 Free Software Foundation, Inc. % @@ -591,6 +591,9 @@ % @/ allows a line break. \let\/=\allowbreak +% @- allows explicit insertion of hyphenation points +\def\-{\discretionary{\normaldash}{}{}}% + % @. is an end-of-sentence period. \def\.{.\spacefactor=\endofsentencespacefactor\space} @@ -1537,9 +1540,10 @@ output) for that.)} \next} \def\makelink{\addtokens{\toksB}% {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} - \def\pdflink#1{% + \def\pdflink#1{\pdflinkpage{#1}{#1}}% + \def\pdflinkpage#1#2{% \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} - \setcolor{\linkcolor}#1\endlink} + \setcolor{\linkcolor}#2\endlink} \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} \else % non-pdf mode @@ -1786,10 +1790,11 @@ output) for that.)} \next} \def\makelink{\addtokens{\toksB}% {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} - \def\pdflink#1{% + \def\pdflink#1{\pdflinkpage{#1}{#1}}% + \def\pdflinkpage#1#2{% \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A << /S /GoTo /D (#1) >> >>}% - \setcolor{\linkcolor}#1\endlink} + \setcolor{\linkcolor}#2\endlink} \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} % % @@ -2134,6 +2139,11 @@ end \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% }% \fi\fi +% +% This is what gets called when #5 of \setfont is empty. +\let\cmap\gobble +% +% (end of cmaps) % Set the font macro #1 to the font named \fontprefix#2. @@ -2149,11 +2159,10 @@ end \def\setfont#1#2#3#4#5{% \font#1=\fontprefix#2#3 scaled #4 \csname cmap#5\endcsname#1% + \ifx#2\ttshape\hyphenchar#1=-1 \fi + \ifx#2\ttbshape\hyphenchar#1=-1 \fi + \ifx#2\ttslshape\hyphenchar#1=-1 \fi } -% This is what gets called when #5 of \setfont is empty. -\let\cmap\gobble -% -% (end of cmaps) % Use cm as the default font prefix. % To specify the font prefix, you must define \fontprefix @@ -2815,13 +2824,6 @@ end % @sansserif, explicit sans. \def\sansserif#1{{\sf #1}} -% We can't just use \exhyphenpenalty, because that only has effect at -% the end of a paragraph. Restore normal hyphenation at the end of the -% group within which \nohyphenation is presumably called. -% -\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} -\def\restorehyphenation{\hyphenchar\font = `- } - \newif\iffrenchspacing \frenchspacingfalse @@ -2890,27 +2892,29 @@ end % Switch to typewriter. \tt % - % But `\ ' produces the large typewriter interword space. + % `\ ' produces the large typewriter interword space. \def\ {{\spaceskip = 0pt{} }}% % - % Turn off hyphenation. - \nohyphenation - % \plainfrenchspacing #1% }% \null % reset spacefactor to 1000 } -% We *must* turn on hyphenation at `-' and `_' in @code. -% (But see \codedashfinish below.) +% This is for LuaTeX: It is not sufficient to disable hyphenation at +% explicit dashes by setting `\hyphenchar` to -1. +\def\dashnobreak{% + \normaldash + \penalty 10000 } + +% We must turn on hyphenation at `-' and `_' in @code. % Otherwise, it is too hard to avoid overfull hboxes % in the Emacs manual, the Library manual, etc. +% We explicitly allow hyphenation at these characters +% using \discretionary. % -% Unfortunately, TeX uses one parameter (\hyphenchar) to control -% both hyphenation at - and hyphenation within words. -% We must therefore turn them both off (\tclose does that) -% and arrange explicitly to hyphenate at a dash. -- rms. +% Hyphenation at - and hyphenation within words was turned off +% by default for the tt fonts using the \hyphenchar parameter of TeX. { \catcode`\-=\active \catcode`\_=\active \catcode`\'=\active \catcode`\`=\active @@ -2923,7 +2927,7 @@ end \let-\codedash \let_\codeunder \else - \let-\normaldash + \let-\dashnobreak \let_\realunder \fi % Given -foo (with a single dash), we do not want to allow a break @@ -3200,7 +3204,7 @@ end % definition of @key with no lozenge. % -\def\key#1{{\setregularquotes \nohyphenation \tt #1}\null} +\def\key#1{{\setregularquotes \tt #1}\null} % @clicksequence{File @click{} Open ...} \def\clicksequence#1{\begingroup #1\endgroup} @@ -3747,6 +3751,7 @@ $$% % Open one extra group, as we want to close it in the middle of \Etitlepage. \begingroup \parindent=0pt \textfonts + \headingsoff % Leave some space at the very top of the page. \vglue\titlepagetopglue % No rule at page bottom unless we print one at the top with @title. @@ -3774,11 +3779,9 @@ $$% % If we use the new definition of \page, we always get a blank page % after the title page, which we certainly don't want. \oldpage + \pageone \endgroup % - % Need this before the \...aftertitlepage checks so that if they are - % in effect the toc pages will come out with page numbers. - \HEADINGSon } \def\finishtitlepage{% @@ -3947,7 +3950,6 @@ $$% } \def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting -\HEADINGSoff % it's the default % When we turn headings on, set the page number to 1. \def\pageone{ @@ -3971,7 +3973,7 @@ $$% \pageone \HEADINGSsinglex } -\def\HEADINGSon{\HEADINGSdouble} +% \def\HEADINGSon{\HEADINGSdouble} % defined by \CHAPPAGon \def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} \let\HEADINGSdoubleafter=\HEADINGSafter @@ -5616,6 +5618,11 @@ might help (with 'rm \jobname.?? \jobname.??s')% \newdimen\entryrightmargin \entryrightmargin=0pt +% for PDF output, whether to make the text of the entry a link to the page +% number. set for @contents and @shortcontents where there is only one +% page number. +\newif\iflinkentrytext + % \entry typesets a paragraph consisting of the text (#1), dot leaders, and % then page number (#2) flushed to the right margin. It is used for index % and table of contents entries. The paragraph is indented by \leftskip. @@ -5642,7 +5649,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% } \def\entrybreak{\unskip\space\ignorespaces}% \def\doentry{% - % Save the text of the entry + % Save the text of the entry in \boxA \global\setbox\boxA=\hbox\bgroup \bgroup % Instead of the swallowed brace. \noindent @@ -5652,12 +5659,21 @@ might help (with 'rm \jobname.?? \jobname.??s')% % with catcodes occurring. } {\catcode`\@=11 +% #1 is the page number \gdef\finishentry#1{% - \egroup % end box A + \egroup % end \boxA \dimen@ = \wd\boxA % Length of text of entry + % add any leaders and page number to \boxA. \global\setbox\boxA=\hbox\bgroup - \unhbox\boxA - % #1 is the page number. + \ifpdforxetex + \iflinkentrytext + \pdflinkpage{#1}{\unhbox\boxA}% + \else + \unhbox\boxA + \fi + \else + \unhbox\boxA + \fi % % Get the width of the page numbers, and only use % leaders if they are present. @@ -5676,6 +5692,8 @@ might help (with 'rm \jobname.?? \jobname.??s')% \fi \fi \egroup % end \boxA + % + % now output \ifdim\wd\boxB = 0pt \noindent\unhbox\boxA\par \nobreak @@ -6375,7 +6393,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \fi } -\parseargdef\setchapternewpage{\csname CHAPPAG#1\endcsname} +\parseargdef\setchapternewpage{\csname CHAPPAG#1\endcsname\HEADINGSon} \def\CHAPPAGoff{% \global\let\contentsalignmacro = \chappager @@ -6392,7 +6410,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \global\let\pchapsepmacro=\chapoddpage \global\def\HEADINGSon{\HEADINGSdouble}} -\CHAPPAGon +\setchapternewpage on % \chapmacro - Chapter opening. % @@ -6772,6 +6790,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \def\thistitle{}% no title in double-sided headings % Record where the Roman numerals started. \ifnum\romancount=0 \global\romancount=\pagecount \fi + \linkentrytexttrue } % \raggedbottom in plain.tex hardcodes \topskip so override it @@ -6899,7 +6918,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % Chapters, in the short toc. % See comments in \dochapentry re vbox and related settings. \def\shortchapentry#1#2#3#4{% - \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}% + \tocentry{\shortchaplabel{#2}\labelspace #1}{#4}% } % Appendices, in the main contents. @@ -6914,7 +6933,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % Unnumbered chapters. \def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} -\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}} +\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{#4}} % Sections. \def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}} @@ -6946,24 +6965,24 @@ might help (with 'rm \jobname.?? \jobname.??s')% % Move the page numbers slightly to the right \advance\entryrightmargin by -0.05em \chapentryfonts - \tocentry{#1}{\dopageno\bgroup#2\egroup}% + \tocentry{#1}{#2}% \endgroup \nobreak\vskip .25\baselineskip plus.1\baselineskip } \def\dosecentry#1#2{\begingroup \secentryfonts \leftskip=\tocindent - \tocentry{#1}{\dopageno\bgroup#2\egroup}% + \tocentry{#1}{#2}% \endgroup} \def\dosubsecentry#1#2{\begingroup \subsecentryfonts \leftskip=2\tocindent - \tocentry{#1}{\dopageno\bgroup#2\egroup}% + \tocentry{#1}{#2}% \endgroup} \def\dosubsubsecentry#1#2{\begingroup \subsubsecentryfonts \leftskip=3\tocindent - \tocentry{#1}{\dopageno\bgroup#2\egroup}% + \tocentry{#1}{#2}% \endgroup} % We use the same \entry macro as for the index entries. @@ -6972,9 +6991,6 @@ might help (with 'rm \jobname.?? \jobname.??s')% % Space between chapter (or whatever) number and the title. \def\labelspace{\hskip1em \relax} -\def\dopageno#1{{\rm #1}} -\def\doshortpageno#1{{\rm #1}} - \def\chapentryfonts{\secfonts \rm} \def\secentryfonts{\textfonts} \def\subsecentryfonts{\textfonts} @@ -7410,7 +7426,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \endgroup % \def\setupverb{% - \tt % easiest (and conventionally used) font for verbatim + \tt \def\par{\leavevmode\endgraf}% \setcodequotes \tabeightspaces @@ -7587,32 +7603,28 @@ might help (with 'rm \jobname.?? \jobname.??s')% \exdentamount=\defbodyindent } -\def\dodefunx#1{% - % First, check whether we are in the right environment: - \checkenv#1% - % - % As above, allow line break if we have multiple x headers in a row. - % It's not a great place, though. - \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi - % - % And now, it's time to reuse the body of the original defun: - \expandafter\gobbledefun#1% -} -\def\gobbledefun#1\startdefun{} +\newtoks\defidx +\newtoks\deftext -% \printdefunline \deffnheader{text} +\def\useindex#1{\defidx={#1}\ignorespaces} + +% Called as \printdefunline \deffooheader{text} % \def\printdefunline#1#2{% \begingroup \plainfrenchspacing - % call \deffnheader: + % call \deffooheader: #1#2 \endheader + % create the index entry + \defcharsdefault + \edef\temp{\noexpand\doind{\the\defidx}{\the\deftext}}% + \temp % common ending: \interlinepenalty = 10000 \advance\rightskip by 0pt plus 1fil\relax \endgraf \nobreak\vskip -\parskip - \penalty\defunpenalty % signal to \startdefun and \dodefunx + \penalty\defunpenalty % signal to \startdefun and \deffoox % Some of the @defun-type tags do not enable magic parentheses, % rendering the following check redundant. But we don't optimize. \checkparencounts @@ -7621,7 +7633,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% \def\Edefun{\endgraf\medbreak} -% \makedefun{deffoo}{ (definition of \deffooheader) } +% \makedefun{deffoo} (\deffooheader parameters) { (\deffooheader expansion) } % % Define \deffoo, \deffoox \Edeffoo and \deffooheader. \def\makedefun#1{% @@ -7636,8 +7648,18 @@ might help (with 'rm \jobname.?? \jobname.??s')% \doingtypefnfalse % distinguish typed functions from all else \parseargusing\activeparens{\printdefunline#3}% }% - \def#2{\dodefunx#1}% - \def#3% + \def#2{% + % First, check whether we are in the right environment: + \checkenv#1% + % + % As in \startdefun, allow line break if we have multiple x headers + % in a row. It's not a great place, though. + \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi + % + \doingtypefnfalse % distinguish typed functions from all else + \parseargusing\activeparens{\printdefunline#3}% + }% + \def#3% definition of \deffooheader follows } \newif\ifdoingtypefn % doing typed function? @@ -7662,18 +7684,23 @@ might help (with 'rm \jobname.?? \jobname.??s')% \fi\fi } +\def\defind#1#2{ + \defidx={#1}% + \deftext={#2}% +} + % Untyped functions: % @deffn category name args \makedefun{deffn}#1 #2 #3\endheader{% - \doind{fn}{\code{#2}}% + \defind{fn}{\code{#2}}% \defname{#1}{}{#2}\magicamp\defunargs{#3\unskip}% } % @defop category class name args \makedefun{defop}#1 {\defopheaderx{#1\ \putwordon}} \def\defopheaderx#1#2 #3 #4\endheader{% - \doind{fn}{\code{#3}\space\putwordon\ \code{#2}}% + \defind{fn}{\code{#3}\space\putwordon\ \code{#2}}% \defname{#1\ \code{#2}}{}{#3}\magicamp\defunargs{#4\unskip}% } @@ -7681,7 +7708,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % @deftypefn category type name args \makedefun{deftypefn}#1 #2 #3 #4\endheader{% - \doind{fn}{\code{#3}}% + \defind{fn}{\code{#3}}% \doingtypefntrue \defname{#1}{#2}{#3}\defunargs{#4\unskip}% } @@ -7689,7 +7716,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % @deftypeop category class type name args \makedefun{deftypeop}#1 {\deftypeopheaderx{#1\ \putwordon}} \def\deftypeopheaderx#1#2 #3 #4 #5\endheader{% - \doind{fn}{\code{#4}\space\putwordon\ \code{#1\ \code{#2}}}% + \defind{fn}{\code{#4}\space\putwordon\ \code{#1\ \code{#2}}}% \doingtypefntrue \defname{#1\ \code{#2}}{#3}{#4}\defunargs{#5\unskip}% } @@ -7698,14 +7725,14 @@ might help (with 'rm \jobname.?? \jobname.??s')% % @deftypevr category type var args \makedefun{deftypevr}#1 #2 #3 #4\endheader{% - \doind{vr}{\code{#3}}% + \defind{vr}{\code{#3}}% \defname{#1}{#2}{#3}\defunargs{#4\unskip}% } % @deftypecv category class type var args \makedefun{deftypecv}#1 {\deftypecvheaderx{#1\ \putwordof}} \def\deftypecvheaderx#1#2 #3 #4 #5\endheader{% - \doind{vr}{\code{#4}\space\putwordof\ \code{#2}}% + \defind{vr}{\code{#4}\space\putwordof\ \code{#2}}% \defname{#1\ \code{#2}}{#3}{#4}\defunargs{#5\unskip}% } @@ -7722,7 +7749,7 @@ might help (with 'rm \jobname.?? \jobname.??s')% % @deftp category name args \makedefun{deftp}#1 #2 #3\endheader{% - \doind{tp}{\code{#2}}% + \defind{tp}{\code{#2}}% \defname{#1}{}{#2}\defunargs{#3\unskip}% } @@ -10489,7 +10516,7 @@ directory should work if nowhere else does.} \DeclareUnicodeCharacter{00AE}{\registeredsymbol{}}% \DeclareUnicodeCharacter{00AF}{\={ }}% % - \DeclareUnicodeCharacter{00B0}{\textdegree} + \DeclareUnicodeCharacter{00B0}{\textdegree}% \DeclareUnicodeCharacter{00B1}{\ensuremath\pm}% \DeclareUnicodeCharacter{00B2}{$^2$}% \DeclareUnicodeCharacter{00B3}{$^3$}% |