Remove remaining @refills from doc/*/*.texi files

1 files changed, 53 insertions, 53 deletions

diff --git a/doc/misc/sc.texi b/doc/misc/sc.texi
index aa0752c80cd..11dbf2eda5e 100644
--- a/doc/misc/sc.texi
+++ b/doc/misc/sc.texi
@@ -146,7 +146,7 @@ Supercite should provide them.  For example, many people would like to
 be able to yank (and cite) only a portion of the original message.
 Since Supercite only modifies the text it finds in the reply buffer as
 set up by the MUA, it is the MUA's responsibility to do partial yanking.
-@xref{Reply Buffer Initialization}.@refill
+@xref{Reply Buffer Initialization}.
 
 @vindex mail-header-separator
 Another potentially useful thing would be for Supercite to set up the
@@ -156,7 +156,7 @@ But by previously agreed upon convention, any text above the
 bodies cannot be modified by Supercite.  Supercite, in fact, doesn't
 know anything about the meaning of these headers, and never ventures
 outside the designated region. @xref{Hints to MUA Authors}, for more
-details.@refill
+details.
 
 @node  What Supercite Does
 @section What Supercite Does
@@ -168,14 +168,14 @@ by calling a hook variable to which Supercite's top-level function
 @code{sc-cite-original} has been added.  When @code{sc-cite-original} is
 executed, the original message must be set up in a very specific way,
 but this is handled automatically by the MUA@.  @xref{Hints to MUA
-Authors}.@refill
+Authors}.
 
 @cindex info alist
 The first thing Supercite does, via @code{sc-cite-original}, is to parse
 through the original message's mail headers.  It saves this data in an
 @dfn{information association list}, or @dfn{info alist}.  The information
 in this list is used in a number of places throughout Supercite.
-@xref{Information Keys and the Info Alist}.@refill
+@xref{Information Keys and the Info Alist}.
 
 @cindex nuking mail headers
 @cindex reference header
@@ -207,7 +207,7 @@ Supercited text and will fill them appropriately.  Emacs's built-in
 filling routines, e.g., @code{fill-paragraph}, do not recognize cited
 text and will not re-fill them properly because it cannot guess the
 @code{fill-prefix} being used.
-@xref{Post-yank Formatting Commands}, for details.@refill
+@xref{Post-yank Formatting Commands}, for details.
 
 As mentioned above, Supercite provides commands to recite or uncite
 regions of text in the reply buffer, and commands to perform other
@@ -216,7 +216,7 @@ informative citations throughout.  Supercite tries to be as configurable
 as possible to allow for a wide range of personalized citation styles,
 but it is also immediately useful with the default configuration, once
 it has been properly connected to your MUA@.  @xref{Getting Connected},
-for more details.@refill
+for more details.
 
 @node  Citations
 @chapter Citations
@@ -304,7 +304,7 @@ string containing four spaces.
 The @dfn{attribution string}.  This element is supplied automatically by
 Supercite, based on your preferences and the original message's mail
 headers, though you may be asked to confirm Supercite's choice.
-@xref{Selecting an Attribution}, for more details.@refill
+@xref{Selecting an Attribution}, for more details.
 
 @cindex citation delimiter
 @vindex sc-citation-delimiter
@@ -330,7 +330,7 @@ In this case, the composed, non-nested citation string used might be
 something like
 @code{@asis{"    Jane> "}}.
 This citation string will be inserted in front of
-every line in the original message that is not already cited.@refill
+every line in the original message that is not already cited.
 
 Nested citations, being simpler than non-nested citations, are composed
 of the same elements, sans the attribution string.  Supercite is smart
@@ -379,7 +379,7 @@ non-nested citation.  Thus the variable
 @code{sc-citation-nonnested-root-regexp} is used to describe only
 non-nested citation roots.  It is important to remember that if you
 change @code{sc-citation-root-regexp} you should always also change
-@code{sc-citation-nonnested-root-regexp}.@refill
+@code{sc-citation-nonnested-root-regexp}.
 
 @node  Information Keys and the Info Alist
 @chapter Information Keys and the Info Alist
@@ -400,7 +400,7 @@ In the case of mail fields, the key is the name of the field, omitting
 the trailing colon.  Info keys are always case insensitive (as are
 mail headers), and the value for a corresponding key can be retrieved
 from the alist with the @code{sc-mail-field} function.  Thus, if the
-following fields were present in the original article:@refill
+following fields were present in the original article:
 
 @example
 Date:@: 08 April 1991, 17:32:09 EST
@@ -489,7 +489,7 @@ the author's first middle name.
 
 If the author's name has more than one middle name, they will appear as
 info keys with the appropriate index (e.g., @code{"sc-middlename-2"},
-@dots{}).  @xref{Selecting an Attribution}.@refill
+@dots{}).  @xref{Selecting an Attribution}.
 
 @node  Reference Headers
 @chapter Reference Headers
@@ -540,7 +540,7 @@ examples below as @var{infokey} indicates that the corresponding value
 of the info key from the info alist will be inserted there.
 (@pxref{Information Keys and the Info Alist}).  For example, in @code{sc-header-on-said}
 below, @var{date} and @var{from} correspond to the values of the
-@samp{Date:@:} and @samp{From:@:} mail headers respectively.@refill
+@samp{Date:@:} and @samp{From:@:} mail headers respectively.
 
 @vindex sc-reference-tag-string
 @vindex reference-tag-string (sc-)
@@ -650,7 +650,7 @@ The following commands are available while in electric reference mode
 Displays the next reference header in the electric reference buffer.  If
 the variable @code{sc-electric-circular-p} is non-@code{nil}, invoking
 @code{sc-eref-next} while viewing the last reference header in the list
-will wrap around to the first header.@refill
+will wrap around to the first header.
 
 @item @code{sc-eref-prev} (@kbd{p})
 @findex sc-eref-prev
@@ -658,7 +658,7 @@ will wrap around to the first header.@refill
 @kindex p
 Displays the previous reference header in the electric reference buffer.
 If the variable @code{sc-electric-circular-p} is non-@code{nil},
-invoking @code{sc-eref-prev} will wrap around to the last header.@refill
+invoking @code{sc-eref-prev} will wrap around to the last header.
 
 @item @code{sc-eref-goto} (@kbd{g})
 @findex sc-eref-goto
@@ -667,7 +667,7 @@ invoking @code{sc-eref-prev} will wrap around to the last header.@refill
 Goes to a specified reference header.  The index (into the
 @code{sc-rewrite-header-list}) can be specified as a numeric argument to
 the command.  Otherwise, Supercite will query you for the index in the
-minibuffer.@refill
+minibuffer.
 
 @item @code{sc-eref-jump} (@kbd{j})
 @findex sc-eref-jump
@@ -681,7 +681,7 @@ value of @code{sc-preferred-header-style}.
 @findex eref-setn (sc-)
 @kindex s
 Set the preferred reference header (i.e.,
-@code{sc-preferred-header-style}) to the currently displayed header.@refill
+@code{sc-preferred-header-style}) to the currently displayed header.
 
 @item @code{sc-eref-exit} (@kbd{C-j}, @key{RET}, and @key{ESC C-c})
 @kindex RET
@@ -690,7 +690,7 @@ Set the preferred reference header (i.e.,
 @findex sc-eref-exit
 @findex eref-exit (sc-)
 Exit from electric reference mode and insert the current header into the
-reply buffer.@refill
+reply buffer.
 
 @item @code{sc-eref-abort} (@kbd{q}, @kbd{x})
 @findex sc-eref-abort
@@ -729,7 +729,7 @@ hook variable has a @code{nil} value, which the MUA recognizes to mean,
 ``use your default citation function.''  When you add Supercite's
 citation function to the hook, thereby giving the variable a
 non-@code{nil} value, it tells the MUA to run the hook via
-@code{run-hooks} instead of using the default citation.@refill
+@code{run-hooks} instead of using the default citation.
 
 Early in Supercite's development, the Supercite author, a few MUA
 authors, and some early Supercite users got together and agreed upon a
@@ -767,7 +767,7 @@ expects the original article's mail headers to be present within this
 region.  Note that Supercite @emph{never} touches any text outside this
 region.  Note further that the region need not be active
 for @code{sc-cite-original} to do its job.
-@xref{Hints to MUA Authors}.@refill
+@xref{Hints to MUA Authors}.
 
 The other step in the getting connected process is to make sure your
 MUA calls @code{sc-cite-original} at the right time.  As mentioned
@@ -784,7 +784,7 @@ this hook since it is only run once.  This will not work, however, if
 your Emacs maintainer has put Supercite into your dumped Emacs image.
 In that case, you can use the @code{sc-pre-hook} variable, but this will
 get executed every time @code{sc-cite-original} is called.  @xref{Reply
-Buffer Initialization}.@refill
+Buffer Initialization}.
 
 @node  Replying and Yanking
 @chapter Replying and Yanking
@@ -814,7 +814,7 @@ This hook variable is run before @code{sc-cite-original} does any other
 work.  You could conceivably use this hook to set certain Supercite
 variables based on the reply buffer's mode or name (i.e., to do
 something different based on whether you are replying or following up to
-an article).@refill
+an article).
 
 @item
 @emph{Inserts Supercite's keymap.}
@@ -942,7 +942,7 @@ there as people on the net, or just about!  It would be impossible for
 Supercite to anticipate every style in existence, and you probably
 wouldn't encounter them all anyway.  But you can configure Supercite to
 recognize those styles you see often.
-@xref{Configuring the Citation Engine}, for details.@refill
+@xref{Configuring the Citation Engine}, for details.
 
 @item
 @emph{Runs @code{sc-post-hook}.}
@@ -951,7 +951,7 @@ recognize those styles you see often.
 This variable is very similar to @code{sc-pre-hook}, except that it runs
 after @code{sc-cite-original} is finished.  This hook is provided mostly
 for completeness and backward compatibility.  Perhaps it could be used to
-reset certain variables set in @code{sc-pre-hook}.@refill
+reset certain variables set in @code{sc-pre-hook}.
 @end enumerate
 
 @node  Filling Cited Text
@@ -987,7 +987,7 @@ setup.
 Also, Supercite will collapse leading whitespace between the citation
 string and the text on a line when the variable
 @code{sc-fixup-whitespace-p} is non-@code{nil}.  The default value for
-this variable is @code{nil}.@refill
+this variable is @code{nil}.
 
 @vindex fill-prefix
 Its important to understand that Supercite's automatic filling (during
@@ -1005,7 +1005,7 @@ When Supercite's automatic filling breaks on a particular message, I
 will use Emacs's undo feature to undo back before the citation was
 applied to the original message.  Then I'll toggle the variables and
 manually cite those paragraphs that I don't want to fill or collapse
-whitespace on.  @xref{Variable Toggling Shortcuts}.@refill
+whitespace on.  @xref{Variable Toggling Shortcuts}.
 
 @kindex C-c C-p C-p
 If you find that Supercite's automatic filling is just too fragile for
@@ -1013,7 +1013,7 @@ your tastes, you might consider one of these alternate approaches.
 Also, to make life easier, a shortcut function to toggle the state of
 both of these variables is provided on the key binding
 @kbd{C-c C-p C-p} (with the default value of @code{sc-mode-map-prefix};
-@pxref{Post-yank Formatting Commands}).@refill
+@pxref{Post-yank Formatting Commands}).
 
 You will noticed that the minor mode string will
 show the state of these variables as qualifier characters.  When both
@@ -1025,7 +1025,7 @@ string will display @samp{SC:f}, and when just
 display @samp{SC:fw}.  Note that the qualifiers chosen are mnemonics for
 the default bindings of the toggling function for each respective
 variable.
-@xref{Variable Toggling Shortcuts}.@refill
+@xref{Variable Toggling Shortcuts}.
 
 Why are these variables not set to @code{nil} by default?  It is because
 many users won't manually fill paragraphs that are Supercited, and there
@@ -1088,7 +1088,7 @@ the author's first middle name.
 
 @item "sc-lastchoice"
 the last attribution string you have selected.  This is useful when you
-recite paragraphs in the reply.@refill
+recite paragraphs in the reply.
 
 @item "sc-consult"
 @vindex sc-attrib-selection-list
@@ -1099,7 +1099,7 @@ key.  See below for details.
 
 @item "x-attribution"
 the original author's suggestion for attribution string choice.  See below
-for details.@refill
+for details.
 @end table
 
 Middle name indexes can be any positive integer greater than zero,
@@ -1184,7 +1184,7 @@ case.  If the variable's value is non-@code{nil}, then
 @code{sc-default-author-name} and @code{sc-default-attribution} are
 used, otherwise, the following steps are taken to find a valid
 attribution string, and the first step to return a non-@code{nil},
-non-empty string becomes the attribution:@refill
+non-empty string becomes the attribution:
 
 @enumerate
 @item
@@ -1244,7 +1244,7 @@ variables in your hook functions, you change the attribution and
 citation strings used by Supercite.  One possible use of this would be
 to override any automatically derived attribution string when it is only
 one character long; e.g., you prefer to use @code{"initials"} but the
-author only has one name.@refill
+author only has one name.
 
 @node  Author Names
 @section Author Names
@@ -1376,7 +1376,7 @@ matched against the current line, from the beginning, using
 @code{looking-at}.  This match folds case if the optional
 @var{case-fold-search} is non-@code{nil}.  If @var{pred} is not a
 string, or does not @code{eval}uate to a string, it is interpreted as a
-binary value (@code{nil} or non-@code{nil}).@refill
+binary value (@code{nil} or non-@code{nil}).
 
 The four special symbol values for @var{pred} are recognized:
 
@@ -1405,7 +1405,7 @@ processing.  By default, if your @var{func} returns @code{nil} (as it
 should be careful to do explicitly), Regi will reset the frame to the
 first entry, and advance @samp{point} to the beginning of the next line.
 If a list is returned from your function, it can contain any combination
-of the following elements:@refill
+of the following elements:
 
 @table @asis
 @item the symbol @code{continue}
@@ -1422,16 +1422,16 @@ entry is still processed.
 This tells Regi to substitute @var{newframe} as the frame it is
 interpreting.  In other words, your @var{func} can modify the Regi frame
 on the fly.  @var{newframe} can be a variable containing a frame, or it
-can be the frame in-lined.@refill
+can be the frame in-lined.
 
 @item the list @code{(step . @var{step})}
 Tells Regi to move @var{step} number of lines forward as it continues
 processing.  By default, Regi moves forward one line.  @var{step} can be
-zero or negative of course, but watch out for infinite loops.@refill
+zero or negative of course, but watch out for infinite loops.
 @end table
 
 During execution of your @var{func}, the following variables will be
-temporarily bound to some useful information:@refill
+temporarily bound to some useful information:
 
 @table @code
 @item curline
@@ -1471,7 +1471,7 @@ preferred style.
 In a similar vein, there are default frames for @dfn{unciting} and
 @dfn{reciting}, contained in the variables
 @code{sc-default-uncite-frame} and @code{sc-default-recite-frame}
-respectively.@refill
+respectively.
 
 As mentioned earlier (@pxref{Recognizing Citations}), citations are
 recognized through the values of the regular expressions
@@ -1500,7 +1500,7 @@ Where @var{infokey} is a key suitable for @code{sc-mail-field},
 @var{regexp} is a regular expression which is @code{string-match}'d
 against the value of the @code{sc-mail-field} key, and @var{frame} is
 the frame to use if a match occurred.  @var{frame} can be a variable
-containing a frame or a frame in-lined.@refill
+containing a frame or a frame in-lined.
 
 When Supercite is about to cite, uncite, or recite a region, it consults
 the appropriate alist and attempts to find a frame to use.  If one
@@ -1524,7 +1524,7 @@ variable @code{sc-mode-map-prefix}.  By default, the
 @code{sc-mode-map-prefix} is @kbd{C-c C-p}; granted, not a great choice,
 but unfortunately the best general solution so far.  In the rest of this
 chapter, we'll assume you've installed Supercite's keymap on the default
-prefix.@refill
+prefix.
 
 @menu
 * Citing Commands::
@@ -1546,7 +1546,7 @@ paragraph to use a nickname, or manually cite a message when setting
 perform these functions on the region of text between @samp{point} and
 @samp{mark}.  Each of them sets the @dfn{undo boundary} before modifying
 the region so that the command can be undone in the standard Emacs
-way.@refill
+way.
 
 Here is the list of Supercite citing commands:
 
@@ -1567,7 +1567,7 @@ frame @code{sc-default-cite-frame}.  It runs the hook
 universal argument (@kbd{C-u}), it temporarily sets
 @code{sc-confirm-always-p} to @code{t} so you can confirm the
 attribution string for a single manual citing.
-@xref{Configuring the Citation Engine}.@refill
+@xref{Configuring the Citation Engine}.
 
 @findex sc-uncite-region
 @findex uncite-region (sc-)
@@ -1578,7 +1578,7 @@ cited line in the region by interpreting the selected frame from
 @code{sc-uncite-frame-alist}, or the default unciting frame
 @code{sc-default-uncite-frame}.  It runs the hook
 @code{sc-pre-uncite-hook} before interpreting the frame.
-@xref{Configuring the Citation Engine}.@refill
+@xref{Configuring the Citation Engine}.
 
 @findex sc-recite-region
 @findex recite-region (sc-)
@@ -1588,7 +1588,7 @@ This command recites each line the region by interpreting the selected
 frame from @code{sc-recite-frame-alist}, or the default reciting frame
 @code{sc-default-recite-frame}.  It runs the hook
 @code{sc-pre-recite-hook} before interpreting the frame.
-@xref{Configuring the Citation Engine}.@refill
+@xref{Configuring the Citation Engine}.
 
 @vindex sc-confirm-always-p
 @vindex confirm-always-p (sc-)
@@ -1612,7 +1612,7 @@ Inserts a reference header into the reply buffer at @samp{point}.  With
 no arguments, the header indexed by @code{sc-preferred-header-style} is
 inserted.  An optional numeric argument is the index into
 @code{sc-rewrite-header-list} indicating which reference header to
-write.@refill
+write.
 
 With just the universal argument (@kbd{C-u}), electric reference mode is
 entered, regardless of the value of @code{sc-electric-references-p}.
@@ -1640,7 +1640,7 @@ this easy to do.
 Like Supercite commands in general, the toggling commands are placed on
 a keymap prefix within the greater Supercite keymap.  For the default
 value of @code{sc-mode-map-prefix}, this will be
-@kbd{C-c C-p C-t}.@refill
+@kbd{C-c C-p C-t}.
 
 The following commands toggle the value of certain Supercite variables
 which take only a binary value:
@@ -1700,7 +1700,7 @@ One special command is provided to toggle both
 @code{sc-auto-fill-region-p} and @code{sc-fixup-whitespace-p} together.
 This is because you typically want to run Supercite with either variable
 as @code{nil} or non-@code{nil}.  The command to toggle these variables
-together is bound on @kbd{C-c C-p C-p}.@refill
+together is bound on @kbd{C-c C-p C-p}.
 
 Finally, the command @kbd{C-c C-p C-t h} (also @kbd{C-c C-p C-t ?})
 brings up a Help message on the toggling keymap.
@@ -1711,7 +1711,7 @@ brings up a Help message on the toggling keymap.
 
 These commands allow you to view, modify, add, and delete various bits
 of information from the info alist.
-@xref{Information Keys and the Info Alist}.@refill
+@xref{Information Keys and the Info Alist}.
 
 @table @asis
 @kindex C-c C-p f
@@ -1753,7 +1753,7 @@ This function is especially useful for replying to digest messages where
 Supercite will initially set up its information for the digest
 originator, but you want to cite each component article with the real
 message author.  Note that unless an error during processing occurs, any
-old information is lost.@refill
+old information is lost.
 @end table
 
 @node  Miscellaneous Commands
@@ -1767,7 +1767,7 @@ old information is lost.@refill
 @item @code{sc-open-line} (@kbd{C-c C-p o})
 Similar to Emacs's standard @code{open-line} commands, but inserts the
 citation string in front of the new line.  As with @code{open-line},
-an optional numeric argument inserts that many new lines.@refill
+an optional numeric argument inserts that many new lines.
 @end table
 
 @node  Hints to MUA Authors
@@ -1810,7 +1810,7 @@ the release of Emacs 19.  Instead of the variable
 @code{mail-yank-hooks}, the hook variable that the MUA should provide is
 @code{mail-citation-hook}.  Richard Stallman suggests that the MUAs
 should @code{defvar} @code{mail-citation-hook} to @code{nil} and perform
-some default citing when that is the case.@refill
+some default citing when that is the case.
 
 If you are writing a new MUA package, or maintaining an existing MUA
 package, you should make it conform to this interface so that your users
@@ -1826,7 +1826,7 @@ buffer.  At this point you should not modify the raw text in any way
 you should place all the original headers into the body of the reply.
 This means that many of the mail headers will be duplicated, one copy
 above the @code{mail-header-separator} line and one copy below, however
-there will probably be more headers below this line.@refill
+there will probably be more headers below this line.
 
 @item
 Set @samp{point} to the beginning of the line containing the first mail
@@ -1835,7 +1835,7 @@ message text.  It is very important that the region be set around the
 text Supercite is to modify and that the mail headers are within this
 region.  Supercite will not venture outside the region for any reason,
 and anything within the region is fair game, so don't put anything that
-@strong{must} remain unchanged inside the region.@refill
+@strong{must} remain unchanged inside the region.
 
 @item
 Run the hook @code{mail-citation-hook}.  You will probably want to
@@ -1846,7 +1846,7 @@ yanking function, check its value.  If it finds
 @code{mail-citation-hook} to be @code{nil}, it should perform some
 default citing behavior.  User who want to connect to Supercite then
 need only add @code{sc-cite-original} to this list of hooks using
-@code{add-hook}.@refill
+@code{add-hook}.
 @end enumerate
 
 If you do all this your MUA will join the ranks of those that conform to