* misc.texi (Interactive Shell, Saving Emacs Sessions)

(Shell History Copying, Terminal emulator): Copyedits.

2 files changed, 52 insertions, 44 deletions

diff --git a/doc/emacs/ChangeLog b/doc/emacs/ChangeLog
index 352ce8feaf1..6e3958e5081 100644
--- a/doc/emacs/ChangeLog
+++ b/doc/emacs/ChangeLog
@@ -1,5 +1,8 @@
 2009-05-12  Chong Yidong  <cyd@stupidchicken.com>
 
+	* misc.texi (Interactive Shell, Saving Emacs Sessions)
+	(Shell History Copying, Terminal emulator): Copyedits.
+
 	* xresources.texi (Resources): Simplify descriptions.  Shorten
 	description of editres, which is not very useful these days.
 	(Table of Resources): Document fontBackend resource.
diff --git a/doc/emacs/misc.texi b/doc/emacs/misc.texi
index 78f99b7a04a..465d8433fb3 100644
--- a/doc/emacs/misc.texi
+++ b/doc/emacs/misc.texi
@@ -564,8 +564,9 @@ the shell to use.  This variable is initialized based on your
 @env{SHELL} environment variable when Emacs is started.  If the file
 name is relative, Emacs searches the directories in the list
 @code{exec-path}; this list is initialized based on the environment
-variable @env{PATH} when Emacs is started.  Your @file{.emacs} file
-can override either or both of these default initializations.
+variable @env{PATH} when Emacs is started.  Your init file can
+override either or both of these default initializations (@pxref{Init
+File}).
 
   Both @kbd{M-!} and @kbd{M-|} wait for the shell command to complete,
 unless you end the command with @samp{&} to make it asynchronous.  To
@@ -594,13 +595,13 @@ before point in that buffer.
 @subsection Interactive Inferior Shell
 
 @findex shell
-  To run a subshell interactively, putting its typescript in an Emacs
-buffer, use @kbd{M-x shell}.  This creates (or reuses) a buffer named
-@samp{*shell*} and runs a subshell with input coming from and output going
-to that buffer.  That is to say, any ``terminal output'' from the subshell
-goes into the buffer, advancing point, and any ``terminal input'' for
-the subshell comes from text in the buffer.  To give input to the subshell,
-go to the end of the buffer and type the input, terminated by @key{RET}.
+  To run a subshell interactively, use @kbd{M-x shell}.  This creates
+(or reuses) a buffer named @samp{*shell*} and runs a subshell with
+input coming from and output going to that buffer.  That is to say,
+any ``terminal output'' from the subshell goes into the buffer,
+advancing point, and any ``terminal input'' for the subshell comes
+from text in the buffer.  To give input to the subshell, go to the end
+of the buffer and type the input, terminated by @key{RET}.
 
   Emacs does not wait for the subshell to do anything.  You can switch
 windows or buffers and edit them while the shell is waiting, or while it is
@@ -627,13 +628,14 @@ Subshells in different buffers run independently and in parallel.
 @cindex @env{ESHELL} environment variable
 @cindex @env{SHELL} environment variable
   The file name used to load the subshell is the value of the variable
-@code{explicit-shell-file-name}, if that is non-@code{nil}.  Otherwise,
-the environment variable @env{ESHELL} is used, or the environment
-variable @env{SHELL} if there is no @env{ESHELL}.  If the file name
-specified is relative, the directories in the list @code{exec-path} are
-searched; this list is initialized based on the environment variable
-@env{PATH} when Emacs is started.  Your @file{.emacs} file can override
-either or both of these default initializations.
+@code{explicit-shell-file-name}, if that is non-@code{nil}.
+Otherwise, the environment variable @env{ESHELL} is used, or the
+environment variable @env{SHELL} if there is no @env{ESHELL}.  If the
+file name specified is relative, the directories in the list
+@code{exec-path} are searched; this list is initialized based on the
+environment variable @env{PATH} when Emacs is started.  Your init file
+can override either or both of these default initializations.
+(@pxref{Init File}).
 
   Emacs sends the new shell the contents of the file
 @file{~/.emacs_@var{shellname}} as input, if it exists, where
@@ -1043,12 +1045,12 @@ Move point to the following prompt (@code{comint-next-prompt}).
 @kindex C-c RET @r{(Shell mode)}
 @findex comint-copy-old-input
 @item C-c @key{RET}
-Copy the input command which point is in, inserting the copy at the end
-of the buffer (@code{comint-copy-old-input}).  This is useful if you
-move point back to a previous command.  After you copy the command, you
-can submit the copy as input with @key{RET}.  If you wish, you can
-edit the copy before resubmitting it.  If you use this command on an
-output line, it copies that line to the end of the buffer.
+Copy the input command at point, inserting the copy at the end of the
+buffer (@code{comint-copy-old-input}).  This is useful if you move
+point back to a previous command.  After you copy the command, you can
+submit the copy as input with @key{RET}.  If you wish, you can edit
+the copy before resubmitting it.  If you use this command on an output
+line, it copies that line to the end of the buffer.
 
 @item Mouse-2
 If @code{comint-use-prompt-regexp} is @code{nil} (the default), copy
@@ -1212,10 +1214,10 @@ you can enable ANSI Color mode.  Here is how to do this:
 @subsection Emacs Terminal Emulator
 @findex term
 
-  To run a subshell in a terminal emulator, putting its typescript in
-an Emacs buffer, use @kbd{M-x term}.  This creates (or reuses) a
-buffer named @samp{*terminal*}, and runs a subshell with input coming
-from your keyboard, and output going to that buffer.
+  To run a subshell in a terminal emulator, use @kbd{M-x term}.  This
+creates (or reuses) a buffer named @samp{*terminal*}, and runs a
+subshell with input coming from your keyboard, and output going to
+that buffer.
 
   The terminal emulator uses Term mode, which has two input modes.  In
 line mode, Term basically acts like Shell mode; see @ref{Shell Mode}.
@@ -1238,7 +1240,7 @@ appearance of the window matches what it would be on a real terminal.
 You can actually run Emacs inside an Emacs Term window.
 
   You can use Term mode to communicate with a device connected to a
-serial port of your computer, see @ref{Serial Terminal}.
+serial port of your computer.  @xref{Serial Terminal}.
 
   The file name used to load the subshell is determined the same way
 as for Shell mode.  To make multiple terminal emulators, rename the
@@ -1574,20 +1576,23 @@ listed below:
 @item -a @var{command}
 @itemx --alternate-editor=@var{command}
 Specify a command to run if @code{emacsclient} fails to contact Emacs.
-This is useful when running @code{emacsclient} in a script.  If
-@var{command} is the empty string, then start Emacs in daemon mode and
-try connecting again.  For example, the following setting for the
-@env{EDITOR} environment variable will always give you an editor, even
-if no Emacs server is running:
+This is useful when running @code{emacsclient} in a script.  For
+example, the following setting for the @env{EDITOR} environment
+variable will always give you an editor, even if no Emacs server is
+running:
 
 @example
 EDITOR="emacsclient --alternate-editor emacs +%d %s"
 @end example
 
 @noindent
+As a special exception, if @var{command} is the empty string, then
+@code{emacsclient} starts Emacs in daemon mode and then tries
+connecting again.
+
 @cindex @env{ALTERNATE_EDITOR} environment variable
-The environment variable @env{ALTERNATE_EDITOR} has the same effect,
-with the value of the @samp{--alternate-editor} option taking
+The environment variable @env{ALTERNATE_EDITOR} has the same effect as
+the @samp{-a} option.  If both are present, the latter takes
 precedence.
 
 @item -c
@@ -2321,7 +2326,7 @@ desktop-save}.  You can also enable automatic saving of the desktop
 when you exit Emacs, and automatic restoration of the last saved
 desktop when Emacs starts: use the Customization buffer (@pxref{Easy
 Customization}) to set @code{desktop-save-mode} to @code{t} for future
-sessions, or add this line in your @file{~/.emacs} file:
+sessions, or add this line in your init file (@pxref{Init File}):
 
 @example
 (desktop-save-mode 1)
@@ -2329,20 +2334,20 @@ sessions, or add this line in your @file{~/.emacs} file:
 
 @findex desktop-change-dir
 @findex desktop-revert
-  If you turn on @code{desktop-save-mode} in your @file{~/.emacs},
-then when Emacs starts, it looks for a saved desktop in the current
-directory.  Thus, you can have separate saved desktops in different
-directories, and the starting directory determines which one Emacs
-reloads.  You can save the current desktop and reload one saved in
-another directory by typing @kbd{M-x desktop-change-dir}.  Typing
-@kbd{M-x desktop-revert} reverts to the desktop previously reloaded.
+  If you turn on @code{desktop-save-mode} in your init file, then when
+Emacs starts, it looks for a saved desktop in the current directory.
+Thus, you can have separate saved desktops in different directories,
+and the starting directory determines which one Emacs reloads.  You
+can save the current desktop and reload one saved in another directory
+by typing @kbd{M-x desktop-change-dir}.  Typing @kbd{M-x
+desktop-revert} reverts to the desktop previously reloaded.
 
   Specify the option @samp{--no-desktop} on the command line when you
 don't want it to reload any saved desktop.  This turns off
 @code{desktop-save-mode} for the current session.  Starting Emacs with
 the @samp{--no-init-file} option also disables desktop reloading,
-since it bypasses the @file{.emacs} init file, where
-@code{desktop-save-mode} is usually turned on.
+since it bypasses the init file, where @code{desktop-save-mode} is
+usually turned on.
 
 @vindex desktop-restore-eager
   By default, all the buffers in the desktop are restored at one go.