Merge from emacs-23; up to 2010-06-02T00:10:42Z!yamaoka@jpl.org.

16 files changed, 114 insertions, 69 deletions

diff --git a/admin/ChangeLog b/admin/ChangeLog
index 87ba151dc34..f2c16b42e23 100644
--- a/admin/ChangeLog
+++ b/admin/ChangeLog
@@ -1,3 +1,7 @@
+2011-02-23  Juanma Barranquero  <lekktu@gmail.com>
+
+	* notes/bugtracker (bugtracker_debbugs_url): Fix typo.
+
 2011-02-19  Eli Zaretskii  <eliz@gnu.org>
 
 	* admin.el (set-version): Add msdos/sed2v2.inp.
diff --git a/admin/notes/bugtracker b/admin/notes/bugtracker
index 02ca77bf7de..f2805eae443 100644
--- a/admin/notes/bugtracker
+++ b/admin/notes/bugtracker
@@ -489,7 +489,7 @@ Here "{id}" is a literal string, a placeholder that will be replaced
 by the bug number you specify after `--fixes debbugs:' in the bzr
 command line (123 in the example above).
 
-In the bazaar.conf file, this setting should go into the [DEFAULTS]
+In the bazaar.conf file, this setting should go into the [DEFAULT]
 section.
 
 In the locations.conf file, it should go into the branch-specific
diff --git a/doc/misc/ChangeLog b/doc/misc/ChangeLog
index 67197450a5b..530f7f1c123 100644
--- a/doc/misc/ChangeLog
+++ b/doc/misc/ChangeLog
@@ -1,5 +1,18 @@
+2011-02-23  Michael Albinus  <michael.albinus@gmx.de>
+
+	* tramp.texi: Use consistently "Emacs" (instead of "GNU Emacs") and
+	"Debian GNU/Linux".
+
+	* trampver.texi [xemacs]: Set emacsothername to "Emacs".
+
 2011-02-23  Glenn Morris  <rgm@gnu.org>
 
+	* dired-x.texi (Features): Minor rephrasing.
+	(Local Variables): Fix typos.
+
+	* edt.texi, erc.texi, gnus.texi, idlwave.texi, mh-e.texi:
+	Standardize some Emacs/XEmacs terminology.
+
 	* dired-x.texi (Features): Don't advertise obsolete local variables.
 	Simplify layout.
 	(Omitting Variables): Update local variables example.
diff --git a/doc/misc/dired-x.texi b/doc/misc/dired-x.texi
index f7c73237249..cde39ff6a62 100644
--- a/doc/misc/dired-x.texi
+++ b/doc/misc/dired-x.texi
@@ -152,10 +152,10 @@ Commands using file marking
 @noindent
 @file{dired-x.el} binds some functions to keys in Dired Mode (@pxref{Key
 Index}) and also binds @kbd{C-x C-j} and @kbd{C-x 4 C-j} @emph{globally} to
-@code{dired-jump} (@pxref{Miscellaneous Commands}).  It may also bind @kbd{C-x
-C-f} and @kbd{C-x 4 C-f} to @code{dired-x-find-file} and
-@code{dired-x-find-file-other-window}, respectively (@pxref{Find File At
-Point}).
+@code{dired-jump} (@pxref{Miscellaneous Commands}).  Optionally, it
+also binds @kbd{C-x C-f} and @kbd{C-x 4 C-f} to
+@code{dired-x-find-file} and @code{dired-x-find-file-other-window},
+respectively (@pxref{Find File At Point}).
 
 @node Technical Details, , Features, Introduction
 @section Technical Details
@@ -514,7 +514,7 @@ omitted automatically
 @noindent
 You can set @code{dired-local-variables-file} to @code{nil} to suppress this.
 The value of @code{dired-enable-local-variables} controls if and how these
-local variables are read.  This variable exists so that if may override the
+local variables are read.  This variable exists so that it may override the
 default value of @code{enable-local-variables}.
 
 @noindent
diff --git a/doc/misc/edt.texi b/doc/misc/edt.texi
index 377bb6ee8c5..8f9f8fc03a2 100644
--- a/doc/misc/edt.texi
+++ b/doc/misc/edt.texi
@@ -87,7 +87,7 @@ informing you that the emulation has been enabled: ``Default EDT keymap
 active''.
 
    You can have the EDT Emulation start up automatically, each time you
-initiate a GNU Emacs session, by adding the following line to your
+initiate an Emacs session, by adding the following line to your
 @file{.emacs} file:
 
 @example
@@ -218,7 +218,7 @@ user quits without saving those buffers.
 
 @item
 Emulate EDT Keypad Mode commands closely so that current EDT users will
-find that it easy and comfortable to use GNU Emacs with a small learning
+find that it easy and comfortable to use Emacs with a small learning
 curve.
 
 @item
@@ -237,7 +237,7 @@ Provide an easy way to restore @strong{all} original Emacs key bindings,
 just as they existed before the EDT emulation was first invoked.
 
 @item
-Support GNU Emacs 19 and higher.  XEmacs 19, and above, is also supported.
+Support Emacs and XEmacs 19 and higher.
 
 @item
 Supports highlighting of marked text within the EDT emulation on all
@@ -285,13 +285,13 @@ apply to you.
 @node Starting emulation
 @chapter How to Get Started
 
-Start up GNU Emacs and enter @kbd{M-x edt-emulation-on} to begin the
+Start up Emacs and enter @kbd{M-x edt-emulation-on} to begin the
 emulation.  After initialization is complete, the following message will
 appear below the status line informing you that the emulation has been
 enabled: ``Default EDT keymap active''.
 
 You can have the EDT Emulation start up automatically, each time you
-initiate a GNU Emacs session, by adding the following line to your
+initiate an Emacs session, by adding the following line to your
 @file{.emacs} file:
 
 @example
@@ -306,7 +306,7 @@ in the EDT Default Mode).
 It is easy to customize key bindings in the EDT Emulation
 (@pxref{Customizing}).  Customizations are placed in a file called
 @file{edt-user.el}.  The Emacs @file{etc/} directory contains an
-example.  If @file{edt-user.el} is found in your GNU Emacs load path
+example.  If @file{edt-user.el} is found in your Emacs load path
 during EDT Emulation initialization, then the following message will
 appear below the status line indicating that the emulation has been
 enabled, enhanced by your own customizations: ``User EDT custom keymap
@@ -321,8 +321,8 @@ restores the original key bindings in effect just prior to invoking the
 emulation.
 
 Emacs binds keys to @acronym{ASCII} control characters and so does the
-real EDT.  Where EDT key bindings and GNU Emacs key bindings conflict,
-the default GNU Emacs key bindings are retained by the EDT emulation by
+real EDT.  Where EDT key bindings and Emacs key bindings conflict,
+the default Emacs key bindings are retained by the EDT emulation by
 default.  If you are a diehard EDT user you may not like this.  The
 @ref{Control keys} section explains how to change this so that the EDT
 bindings to @acronym{ASCII} control characters override the default
@@ -364,7 +364,7 @@ older SunOS release configured with a Sun Type 5 keyboard:
 @example
 ! File:  .xmodmaprc
 !
-! Set up Sun Type 5 keypad for use with the GNU Emacs EDT Emulation
+! Set up Sun Type 5 keypad for use with the Emacs EDT Emulation
 !
 keycode  53 = KP_Divide
 keycode  54 = KP_Multiply
@@ -436,7 +436,7 @@ things up nicely.
 @example
 ! File:  .xmodmaprc
 !
-! Set up PC keypad under GNU/Linux for the GNU Emacs EDT Emulation
+! Set up PC keypad under GNU/Linux for the Emacs EDT Emulation
 !
 clear  mod2
 keycode  77 = F12
@@ -518,7 +518,7 @@ assign Num_Lock back to mod2.
 @example
 ! File:  .xmodmaprc
 !
-! Set up PC keypad under GNU/Linux for the GNU Emacs EDT Emulation
+! Set up PC keypad under GNU/Linux for the Emacs EDT Emulation
 !
 clear  mod2
 keycode  77 = F12
@@ -541,7 +541,7 @@ In general, you will find that this emulation of EDT replicates most,
 but not all, of EDT's most used Keypad Mode editing functions and
 behavior.  It is not perfect, but most EDT users who have tried the
 emulation agree that it is quite good enough to make it easy for
-die-hard EDT users to move over to using GNU Emacs.
+die-hard EDT users to move over to using Emacs.
 
 Here's a list of the most important differences between EDT and this GNU
 Emacs EDT Emulation.  The list is short but you must be aware of these
@@ -783,7 +783,7 @@ terminals on the same system, you need not look at @file{edt-user.el2}.
 @end ignore
 
 First, you need to have your own private lisp directory, say
-@file{~/lisp}, and you should add it to the GNU Emacs load path.
+@file{~/lisp}, and you should add it to the Emacs load path.
 
 @strong{Please note:} A few sites have different load-path requirements,
 so the above directions may need some modification if your site has such
@@ -898,8 +898,8 @@ Here are some examples:
 @node Control keys
 @section Enabling EDT Control Key Sequence Bindings
 
-Where EDT key bindings and GNU Emacs key bindings conflict, the default
-GNU Emacs key bindings are retained by default.  Some diehard EDT users
+Where EDT key bindings and Emacs key bindings conflict, the default
+Emacs key bindings are retained by default.  Some diehard EDT users
 may not like this.  So, if the variable
 @code{edt-use-EDT-control-key-bindings} is set to true in a user's
 @file{.emacs} file, then the default EDT Emulation mode will enable most
diff --git a/doc/misc/erc.texi b/doc/misc/erc.texi
index 463a14f08d2..b46748a08f9 100644
--- a/doc/misc/erc.texi
+++ b/doc/misc/erc.texi
@@ -36,7 +36,7 @@ and modified without restriction.
 @titlepage
 @title ERC manual
 @subtitle a full-featured IRC client
-@subtitle for GNU Emacs and XEmacs
+@subtitle for Emacs and XEmacs
 
 @c The following two commands
 @c start the copyright page.
diff --git a/doc/misc/gnus.texi b/doc/misc/gnus.texi
index f990ee69a08..b55452cfa82 100644
--- a/doc/misc/gnus.texi
+++ b/doc/misc/gnus.texi
@@ -22498,7 +22498,7 @@ variables should be either strings or symbols naming functions that
 return a string.  When the mouse passes over text with this property
 set, a balloon window will appear and display the string.  Please
 refer to @ref{Tooltips, ,Tooltips, emacs, The Emacs Manual},
-(in GNU Emacs) or the doc string of @code{balloon-help-mode} (in
+(in Emacs) or the doc string of @code{balloon-help-mode} (in
 XEmacs) for more information on this.  (For technical reasons, the
 guillemets have been approximated as @samp{<<} and @samp{>>} in this
 paragraph.)
@@ -27766,7 +27766,7 @@ to install Gnus after compiling it, give @file{make.bat} @code{/copy} as
 the second parameter.
 
 @file{make.bat} has been rewritten from scratch, it now features
-automatic recognition of XEmacs and GNU Emacs, generates
+automatic recognition of XEmacs and Emacs, generates
 @file{gnus-load.el}, checks if errors occur while compilation and
 generation of info files and reports them at the end of the build
 process.  It now uses @code{makeinfo} if it is available and falls
diff --git a/doc/misc/idlwave.texi b/doc/misc/idlwave.texi
index 94aeb612df7..8e172301915 100644
--- a/doc/misc/idlwave.texi
+++ b/doc/misc/idlwave.texi
@@ -4275,7 +4275,7 @@ browse-url-browser-function} or similar when attempting to load IDLWAVE
 under XEmacs.}
 
 You don't have the @samp{browse-url} (or other required) XEmacs package.
-Unlike GNU Emacs, XEmacs distributes many packages separately from the
+Unlike Emacs, XEmacs distributes many packages separately from the
 main program.  IDLWAVE is actually among these, but is not always the
 most up to date.  When installing IDLWAVE as an XEmacs package, it
 should prompt you for required additional packages.  When installing it
diff --git a/doc/misc/mh-e.texi b/doc/misc/mh-e.texi
index 59da631c6ea..43d7bc74553 100644
--- a/doc/misc/mh-e.texi
+++ b/doc/misc/mh-e.texi
@@ -211,9 +211,9 @@ However, MH-E was the tip of the iceberg, and I discovered more and
 more niceties about GNU Emacs and MH@. Now I'm fully hooked on both of
 them.
 
-The MH-E package is distributed with GNU Emacs@footnote{Version
-@value{VERSION} of MH-E appeared in GNU Emacs 23.1. It is supported
-in GNU Emacs 21 and 22, as well as XEmacs 21 (except for versions
+The MH-E package is distributed with Emacs@footnote{Version
+@value{VERSION} of MH-E appeared in Emacs 23.1. It is supported
+in Emacs 21 and 22, as well as XEmacs 21 (except for versions
 21.5.9-21.5.16). It is compatible with MH versions 6.8.4 and higher,
 all versions of nmh, and GNU mailutils 1.0 and higher.}, so you
 shouldn't have to do anything special to use it. Gnus is also
diff --git a/doc/misc/tramp.texi b/doc/misc/tramp.texi
index 346354b3170..8bcce244f9d 100644
--- a/doc/misc/tramp.texi
+++ b/doc/misc/tramp.texi
@@ -369,13 +369,12 @@ behind the scenes when you open a file with @value{tramp}.
 @cindex obtaining Tramp
 
 @value{tramp} is freely available on the Internet and the latest
-release may be downloaded from
-@uref{ftp://ftp.gnu.org/gnu/tramp/}.  This release includes the full
-documentation and code for @value{tramp}, suitable for installation.
-But GNU Emacs (22 or later) includes @value{tramp} already, and there
-is a @value{tramp} package for XEmacs, as well.  So maybe it is easier
-to just use those.  But if you want the bleeding edge, read
-on@dots{...}
+release may be downloaded from @uref{ftp://ftp.gnu.org/gnu/tramp/}.
+This release includes the full documentation and code for
+@value{tramp}, suitable for installation.  But Emacs (22 or later)
+includes @value{tramp} already, and there is a @value{tramp} package
+for XEmacs, as well.  So maybe it is easier to just use those.  But if
+you want the bleeding edge, read on@dots{...}
 
 For the especially brave, @value{tramp} is available from CVS.  The CVS
 version is the latest version of the code and may contain incomplete
@@ -445,10 +444,10 @@ GVFS integration started in February 2009.
 @end ifset
 
 In December 2001, @value{tramp} has been added to the XEmacs package
-repository.  Being part of the GNU Emacs repository happened in June
-2002, the first release including @value{tramp} was GNU Emacs 22.1.
+repository.  Being part of the Emacs repository happened in June 2002,
+the first release including @value{tramp} was Emacs 22.1.
 
-@value{tramp} is also a GNU/Linux Debian package since February 2001.
+@value{tramp} is also a Debian GNU/Linux package since February 2001.
 
 
 @c Installation chapter is necessary only in case of standalone
@@ -1704,9 +1703,10 @@ By default, this is set to a reasonable set of defaults for most
 machines.  The symbol @code{tramp-default-remote-path} is a place
 holder, it is replaced by the list of directories received via the
 command @command{getconf PATH} on your remote machine.  For example,
-on GNU Debian this is @file{/bin:/usr/bin}, whereas on Solaris this is
-@file{/usr/xpg4/bin:/usr/ccs/bin:/usr/bin:/opt/SUNWspro/bin}.  It is
-recommended to apply this symbol on top of @code{tramp-remote-path}.
+on Debian GNU/Linux this is @file{/bin:/usr/bin}, whereas on Solaris
+this is @file{/usr/xpg4/bin:/usr/ccs/bin:/usr/bin:/opt/SUNWspro/bin}.
+It is recommended to apply this symbol on top of
+@code{tramp-remote-path}.
 
 It is possible, however, that your local (or remote ;) system
 administrator has put the tools you want in some obscure local
@@ -2740,8 +2740,8 @@ There is also a Savannah project page.
 @item
 Which systems does it work on?
 
-The package has been used successfully on GNU Emacs 22, GNU Emacs 23,
-XEmacs 21 (starting with 21.4), and SXEmacs 22.
+The package has been used successfully on Emacs 22, Emacs 23, XEmacs
+21 (starting with 21.4), and SXEmacs 22.
 
 The package was intended to work on Unix, and it really expects a
 Unix-like system on the remote end (except the @option{smb} method),
@@ -3583,9 +3583,9 @@ printed and deleted.
 But I have decided that this is too fragile to reliably work, so on some
 systems you'll have to do without the uuencode methods.
 
-@item The @value{tramp} filename syntax differs between GNU Emacs and XEmacs.
+@item The @value{tramp} filename syntax differs between Emacs and XEmacs.
 
-The GNU Emacs maintainers wish to use a unified filename syntax for
+The Emacs maintainers wish to use a unified filename syntax for
 Ange-FTP and @value{tramp} so that users don't have to learn a new
 syntax.  It is sufficient to learn some extensions to the old syntax.
 
diff --git a/doc/misc/trampver.texi b/doc/misc/trampver.texi
index ff5641fb4b4..437b1372c11 100644
--- a/doc/misc/trampver.texi
+++ b/doc/misc/trampver.texi
@@ -63,7 +63,7 @@
 @set postfixhop         /
 @set ipv6prefix
 @set ipv6postfix
-@set emacsothername     GNU Emacs
+@set emacsothername     Emacs
 @set emacsotherdir      emacs
 @set emacsotherfilename tramp-emacs.html
 @end ifset
diff --git a/lisp/ChangeLog b/lisp/ChangeLog
index 14ef035445a..df3098332f9 100644
--- a/lisp/ChangeLog
+++ b/lisp/ChangeLog
@@ -1,3 +1,11 @@
+2011-02-23  Kenichi Handa  <handa@m17n.org>
+
+	* mail/rmailmm.el (rmail-mime-process-multipart): Do not signal an
+	error when a multipart boundary in the nested multipart is found.
+
+	* mail/rmail.el (rmail-start-mail): Decode "encoded-words" of
+	header components.
+
 2011-02-23  Glenn Morris  <rgm@gnu.org>
 
 	* dired.el (dired-mode): Call hack-dir-local-variables-non-file-buffer.
diff --git a/lisp/mail/rmail.el b/lisp/mail/rmail.el
index 06867f6d92a..7fe5383d865 100644
--- a/lisp/mail/rmail.el
+++ b/lisp/mail/rmail.el
@@ -3443,6 +3443,16 @@ does not pop any summary buffer."
 	(setq yank-action (list 'insert-buffer replybuffer)))
     (push (cons "cc" cc) other-headers)
     (push (cons "in-reply-to" in-reply-to) other-headers)
+    (setq other-headers
+	  (mapcar #'(lambda (elt)
+		      (cons (car elt) (if (stringp (cdr elt))
+					  (rfc2047-decode-string (cdr elt)))))
+		  other-headers))
+    (if (stringp to) (setq to (rfc2047-decode-string to)))
+    (if (stringp in-reply-to)
+	(setq in-reply-to (rfc2047-decode-string in-reply-to)))
+    (if (stringp cc) (setq cc (rfc2047-decode-string cc)))
+    (if (stringp subject) (setq subject (rfc2047-decode-string subject)))
     (prog1
 	(compose-mail to subject other-headers noerase
 		      switch-function yank-action sendactions
@@ -3450,7 +3460,7 @@ does not pop any summary buffer."
       (if (eq switch-function 'switch-to-buffer-other-frame)
 	  ;; This is not a standard frame parameter; nothing except
 	  ;; sendmail.el looks at it.
-	  (modify-frame-parameters (selected-frame)
+	    (modify-frame-parameters (selected-frame)
 				   '((mail-dedicated-frame . t)))))))
 
 (defun rmail-mail-return ()
diff --git a/lisp/mail/rmailmm.el b/lisp/mail/rmailmm.el
index 0bfeb121ca4..96132739b20 100644
--- a/lisp/mail/rmailmm.el
+++ b/lisp/mail/rmailmm.el
@@ -853,28 +853,33 @@ The other arguments are the same as `rmail-mime-multipart-handler'."
 	    ((looking-at "[ \t]*\n")
 	     (setq next (copy-marker (match-end 0) t)))
 	    (t
-	     (rmail-mm-get-boundary-error-message
-	      "Malformed boundary" content-type content-disposition
-	      content-transfer-encoding)))
-
-      (setq index (1+ index))
-      ;; Handle the part.
-      (if parse-tag
+	     ;; The original code signalled an error as below, but
+	     ;; this line may be a boundary of nested multipart.  So,
+	     ;; we just set `next' to nil to skip this line
+	     ;; (rmail-mm-get-boundary-error-message
+	     ;;  "Malformed boundary" content-type content-disposition
+	     ;;  content-transfer-encoding)
+	     (setq next nil)))
+
+      (when next
+	(setq index (1+ index))
+	;; Handle the part.
+	(if parse-tag
+	    (save-restriction
+	      (narrow-to-region beg end)
+	      (let ((child (rmail-mime-process
+			    nil (format "%s/%d" parse-tag index)
+			    content-type content-disposition)))
+		;; Display a tagline.
+		(aset (aref (rmail-mime-entity-display child) 1) 1
+		      (aset (rmail-mime-entity-tagline child) 2 t))
+		(push child entities)))
+
+	  (delete-region end next)
 	  (save-restriction
 	    (narrow-to-region beg end)
-	    (let ((child (rmail-mime-process
-			  nil (format "%s/%d" parse-tag index)
-			  content-type content-disposition)))
-	      ;; Display a tagline.
-	      (aset (aref (rmail-mime-entity-display child) 1) 1
-		    (aset (rmail-mime-entity-tagline child) 2 t))
-	      (push child entities)))
-
-	(delete-region end next)
-	(save-restriction
-	  (narrow-to-region beg end)
-	  (rmail-mime-show)))
-      (goto-char (setq beg next)))
+	    (rmail-mime-show)))
+	(goto-char (setq beg next))))
 
     (when parse-tag
       (setq entities (nreverse entities))
diff --git a/src/ChangeLog b/src/ChangeLog
index 8befb78f91f..194f1c44f84 100644
--- a/src/ChangeLog
+++ b/src/ChangeLog
@@ -1,3 +1,8 @@
+2011-02-23  Kenichi Handa  <handa@m17n.org>
+
+	* font.c (font_open_entity): Be sure to set scaled_pixel_size.
+	(font_find_for_lface): Check if attrs[LFACE_HEIGHT_INDEX] is integer.
+
 2011-02-22  Paul Eggert  <eggert@cs.ucla.edu>
 
 	* dired.c (Ffile_attributes): Simplify and avoid #ifdef.
diff --git a/src/font.c b/src/font.c
index d77eafb6ad2..35821ae34f9 100644
--- a/src/font.c
+++ b/src/font.c
@@ -2806,7 +2806,7 @@ font_open_entity (FRAME_PTR f, Lisp_Object entity, int pixel_size)
   Lisp_Object objlist, size, val, font_object;
   struct font *font;
   int min_width, height;
-  int scaled_pixel_size;
+  int scaled_pixel_size = pixel_size;
 
   font_assert (FONT_ENTITY_P (entity));
   size = AREF (entity, FONT_SIZE_INDEX);
@@ -3121,7 +3121,7 @@ font_find_for_lface (FRAME_PTR f, Lisp_Object *attrs, Lisp_Object spec, int c)
   XSETFRAME (frame, f);
   size = AREF (spec, FONT_SIZE_INDEX);
   pixel_size = font_pixel_size (f, spec);
-  if (pixel_size == 0)
+  if (pixel_size == 0 && INTEGERP (attrs[LFACE_HEIGHT_INDEX]))
     {
       double pt = XINT (attrs[LFACE_HEIGHT_INDEX]);