path: root/docs/change-log.md

Change log
==========

2.6.1
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/40?closed=1)

### Bugfixes

* Fixed a bug on Python 3 installations preventing the use of the `attach` and
  `exec_run` methods.


2.6.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/38?closed=1)

### Features

* Added support for `mounts` in `APIClient.create_host_config` and
  `DockerClient.containers.run`
* Added support for `consistency`, `tmpfs_size` and `tmpfs_mode` when
  creating mount objects.
* `Mount` objects now support the `tmpfs` and `npipe` types.
* Added support for `extra_hosts` in the `build` methods.
* Added support for the configs API:
    * In `APIClient`: `create_config`, `inspect_config`, `remove_config`,
      `configs`
    * In `DockerClient`: `configs.create`, `configs.get`, `configs.list` and
      the `Config` model.
    * Added `configs` parameter to `ContainerSpec`. Each item in the `configs`
      list must be a `docker.types.ConfigReference` instance.
* Added support for the following parameters when creating a `ContainerSpec`
  object: `groups`, `open_stdin`, `read_only`, `stop_signal`, `helathcheck`,
  `hosts`, `ns_config`, `configs`, `privileges`.
* Added the following configuration classes to `docker.types`:
  `ConfigReference`, `DNSConfig`, `Privileges`, `SwarmExternalCA`.
* Added support for `driver` in `APIClient.create_secret` and
  `DockerClient.secrets.create`.
* Added support for `scope` in `APIClient.inspect_network` and
  `APIClient.create_network`, and their `DockerClient` equivalent.
* Added support for the following parameters to `create_swarm_spec`:
  `external_cas`, `labels`, `signing_ca_cert`, `signing_ca_key`,
  `ca_force_rotate`, `autolock_managers`, `log_driver`. These additions
  also apply to `DockerClient.swarm.init`.
* Added support for `insert_defaults` in `APIClient.inspect_service` and
  `DockerClient.services.get`.

### Bugfixes

* Fixed a bug where reading a 0-length frame in log streams would incorrectly
  interrupt streaming.
* Fixed a bug where the `id` member on `Swarm` objects wasn't being populated.
* Fixed a bug that would cause some data at the beginning of an upgraded
  connection stream (`attach`, `exec_run`) to disappear.

2.5.1
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/37?closed=1)

### Bugfixes

* Fixed a bug where patterns ending with `**` in `.dockerignore` would
  raise an exception
* Fixed a bug where using `attach` with the `stream` argument set to `False`
  would raise an exception

2.5.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/34?closed=1)

### Features

* Added support for the `squash` parameter in `APIClient.build` and
  `DockerClient.images.build`.
* When using API version 1.23 or above, `load_image` will now return a
  generator of progress as JSON `dict`s.
* `remove_image` now returns the content of the API's response.


### Bugfixes

* Fixed an issue where the `auto_remove` parameter in
  `DockerClient.containers.run` was not taken into account.
* Fixed a bug where `.dockerignore` patterns starting with a slash
  were ignored.
* Fixed an issue with the handling of `**` patterns in `.dockerignore`
* Fixed a bug where building `FROM` a private Docker Hub image when not
  using a cred store would fail.
* Fixed a bug where calling `create_service` or `update_service` with
  `task_template` as a `dict` would raise an exception.
* Fixed the handling of TTY-enabled containers in `attach` and `exec_run`.
* `DockerClient.containers.run` will no longer attempt to stream logs if the
  log driver doesn't support the operation.

### Miscellaneous

* Added extra requirements for better TLS support on some platforms.
  These can be installed or required through the `docker[tls]` notation.

2.4.2
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/36?closed=1)

### Bugfixes

* Fixed a bug where the `split_port` utility would raise an exception when
  passed a non-string argument.

2.4.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/33?closed=1)

### Features

* Added support for the `target` and `network_mode` parameters in
  `APIClient.build` and `DockerClient.images.build`.
* Added support for the `runtime` parameter in `APIClient.create_container`
  and `DockerClient.containers.run`.
* Added support for the `ingress` parameter in `APIClient.create_network` and
  `DockerClient.networks.create`.
* Added support for `placement` configuration in `docker.types.TaskTemplate`.
* Added support for `tty` configuration in `docker.types.ContainerSpec`.
* Added support for `start_period` configuration in `docker.types.Healthcheck`.
* The `credHelpers` section in Docker's configuration file is now recognized.
* Port specifications including IPv6 endpoints are now supported.

### Bugfixes

* Fixed a bug where instantiating a `DockerClient` using `docker.from_env`
  wouldn't correctly set the default timeout value.
* Fixed a bug where `DockerClient.secrets` was not accessible as a property.
* Fixed a bug where `DockerClient.build` would sometimes return the wrong
  image.
* Fixed a bug where values for `HostConfig.nano_cpus` exceeding 2^32 would
  raise a type error.
* `Image.tag` now properly returns `True` when the operation is successful.
* `APIClient.logs` and `Container.logs` now raise an exception if the `since`
  argument uses an unsupported type instead of ignoring the value.
* Fixed a bug where some methods would raise a `NullResource` exception when
  the resource ID was provided using a keyword argument.

### Miscellaneous

* `APIClient` instances can now be pickled.

2.3.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/31?closed=1)

### Features

* Added support for the following `HostConfig` parameters: `volume_driver`,
  `cpu_count`, `cpu_percent`, `nano_cpus`, `cpuset_mems`.
* Added support for `verbose` parameter in `APIClient.inspect_network` and
  `DockerClient.networks.get`.
* Added support for the `environment` parameter in `APIClient.exec_create`
  and `Container.exec_run`
* Added `reload_config` method to `APIClient`, that lets the user reload
  the `config.json` data from disk.
* Added `labels` property to the `Image` and `Container` classes.
* Added `image` property to the `Container` class.

### Bugfixes

* Fixed a bug where setting `replicas` to zero in `ServiceMode` would not
  register as a valid entry.
* Fixed a bug where `DockerClient.images.build` would report a failure after
  a successful build if a `tag` was set.
* Fixed an issue where `DockerClient.images.pull` would fail to return the
  corresponding image object if a `tag` was set.
* Fixed a bug where a list of `mounts` provided to `APIClient.create_service`
  would sometimes be parsed incorrectly.
* Fixed a bug where calling `Network.containers` would crash when no containers
  were associated with the network.
* Fixed an issue where `Network.connect` and `Network.disconnect` would not
  accept some of the documented parameters.
* Fixed a bug where the `cpuset_cpus` parameter would not be properly set in
  `APIClient.create_host_config`.

### Miscellaneous

* The invalid `networks` argument in `DockerClient.containers.run` has been
  replaced with a (working) singular `network` argument.


2.2.1
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/32?closed=1)

### Bugfixes

* Fixed a bug where the `status_code` attribute of `APIError` exceptions would
  not reflect the expected value.
* Fixed an issue where the `events` method would time out unexpectedly if no
  data was sent by the engine for a given amount of time.


2.2.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/30?closed=1)

### Features

* Default API version has been bumped to `1.26` (Engine 1.13.1+)
* Upgrade plugin:
  * Added the `upgrade_plugin` method to the `APIClient` class
  * Added the `upgrade` method to the `Plugin` class
* Service logs:
  * Added the `service_logs` method to the `APIClient` class
  * Added the `logs` method to the `Service` class
* Added the `df` method to `APIClient` and `DockerClient`
* Added support for `init` and `init_path` parameters in `HostConfig`
  and `DockerClient.containers.run`
* Added support for `hostname` parameter in `ContainerSpec` and
  `DockerClient.service.create`
* Added support for port range to single port in port mappings
  (e.g. `8000-8010:80`)

### Bugfixes

* Fixed a bug where a missing container port in a port mapping would raise
  an unexpected `TypeError`
* Fixed a bug where the `events` method in `APIClient` and `DockerClient`
  would not respect custom headers set in `config.json`


2.1.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/27?closed=1)

### Features

* Added the following pruning methods:
    * In `APIClient`: `prune_containers`, `prune_images`, `prune_networks`,
      `prune_volumes`
    * In `DockerClient`: `containers.prune`, `images.prune`, `networks.prune`,
      `volumes.prune`
* Added support for the plugins API:
    * In `APIClient`: `configure_plugin`, `create_plugin`, `disable_plugin`,
      `enable_plugin`, `inspect_plugin`, `pull_plugin`, `plugins`,
      `plugin_privileges`, `push_plugin`, `remove_plugin`
    * In `DockerClient`: `plugins.create`, `plugins.get`, `plugins.install`,
      `plugins.list`, and the `Plugin` model.
* Added support for the secrets API:
    * In `APIClient`: `create_secret`, `inspect_secret`, `remove_secret`,
      `secrets`
    * In `DockerClient`: `secret.create`, `secret.get`, `secret.list` and
      the `Secret` model.
    * Added `secrets` parameter to `ContainerSpec`. Each item in the `secrets`
      list must be a `docker.types.SecretReference` instance.
* Added support for `cache_from` in `APIClient.build` and
  `DockerClient.images.build`.
* Added support for `auto_remove` and `storage_opt` in
  `APIClient.create_host_config` and `DockerClient.containers.run`
* Added support for `stop_timeout` in `APIClient.create_container` and
  `DockerClient.containers.run`
* Added support for the `force` parameter in `APIClient.remove_volume` and
  `Volume.remove`
* Added support for `max_failure_ratio` and `monitor` in `UpdateConfig`
* Added support for `force_update` in `TaskTemplate`
* Made `name` parameter optional in `APIClient.create_volume` and
  `DockerClient.volumes.create`

### Bugfixes

* Fixed a bug where building from a directory containing socket-type files
  would raise an unexpected `AttributeError`.
* Fixed an issue that was preventing the `DockerClient.swarm.init` method to
  take into account arguments passed to it.
* `Image.tag` now correctly returns a boolean value upon completion.
* Fixed several issues related to passing `volumes` in
  `DockerClient.containers.run`
* Fixed an issue where `DockerClient.image.build` wouldn't return an `Image`
  object even when the build was successful


2.0.2
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/29?closed=1)

### Bugfixes

* Installation of the package now fails if the `docker-py` package is
  installed in order to prevent obscure naming conflicts when both
  packages co-exist.
* Added missing `filters` parameter to `APIClient.networks`.
* Resource objects generated by the `DockerClient` are now hashable.
* Fixed a bug where retrieving untagged images using `DockerClient`
  would raise a `TypeError` exception.
* `mode` parameter in `create_service` is now properly converted to
  a valid data type for the Engine API. Use `ServiceMode` for advanced
  configurations.
* Fixed a bug where the decoded `APIClient.events` stream would sometimes raise
  an exception when a container is stopped or restarted.

2.0.1
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/28?closed=1)

### Bugfixes

* Fixed a bug where forward slashes in some .dockerignore patterns weren't
  being parsed correctly on Windows
* Fixed a bug where `Mount.parse_mount_string` would never set the read_only
  parameter on the resulting `Mount`.
* Fixed a bug where `Mount.parse_mount_string` would incorrectly mark host
  binds as being of `volume` type.

2.0.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/22?closed=1)

### Breaking changes

* Dropped support for Python 2.6
* `docker.Client` has been renamed to `docker.APIClient`
* `docker.from_env` now creates a `DockerClient` instance instead of an
  `APIClient` instance.
* Removed HostConfig parameters from `APIClient.start`
* The minimum supported API version is now 1.21 (Engine version 1.9.0+)
* The name of the `pip` package is now `docker` (was: `docker-py`). New
  versions of this library will only be published as `docker` from now on.
* `docker.ssladapter` is now `docker.transport.ssladapter`
* The package structure has been flattened in certain cases, which may affect
  import for `docker.auth` and `docker.utils.ports`
* `docker.utils.types` has been moved to `docker.types`
* `create_host_config`, `create_ipam_pool` and `create_ipam_config` have been
  removed from `docker.utils`. They have been replaced by the following classes
  in `docker.types`: `HostConfig`, `IPAMPool` and `IPAMCOnfig`.

### Features

* Added a high-level, user-focused API as `docker.DockerClient`. See the
  README and documentation for more information.
* Implemented `update_node` method in `APIClient`.
* Implemented `remove_node` method in `APIClient`.
* Added support for `restart_policy` in `update_container`.
* Added support for `labels` and `shmsize` in `build`.
* Added support for `attachable` in `create_network`
* Added support for `healthcheck` in `create_container`.
* Added support for `isolation` in `HostConfig`.
* Expanded support for `pid_mode` in `HostConfig` (now supports arbitrary
  values for API version >= 1.24).
* Added support for `options` in `IPAMConfig`
* Added a `HealthCheck` class to `docker.types` to be used in
  `create_container`.
* Added an `EndpointSpec` class to `docker.types` to be used in
  `create_service` and `update_service`.


### Bugfixes

* Fixed a bug where auth information would not be properly passed to the engine
  during a `build` if the client used a credentials store.
* Fixed an issue with some exclusion patterns in `build`.
* Fixed an issue where context files were bundled with the wrong permissions
  when calling `build` on Windows.
* Fixed an issue where auth info would not be retrieved from its default location
  on Windows.
* Fixed an issue where lists of `networks` in `create_service` and
  `update_service` wouldn't be properly converted for the engine.
* Fixed an issue where `endpoint_config` in `create_service` and
  `update_service` would be ignored.
* `endpoint_config` in `create_service` and `update_service` has been
  deprecated in favor of `endpoint_spec`
* Fixed a bug where `constraints` in a `TaskTemplate` object wouldn't be
  properly converted for the engine.
* Fixed an issue where providing a dictionary for `env` in `ContainerSpec`
  would provoke an `APIError` when sent to the engine.
* Fixed a bug where providing an `env_file` containing empty lines in
  `create_container`would raise an exception.
* Fixed a bug where `detach` was being ignored by `exec_start`.

### Documentation

* Documentation for classes and methods is now included alongside the code as
  docstrings.

1.10.6
------

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/26?closed=1)

### Bugfixes

* Fixed an issue where setting a `NpipeSocket` instance to blocking mode would
  put it in non-blocking mode and vice-versa.


1.10.5
------

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/25?closed=1)

### Bugfixes

* Fixed an issue where concurrent attempts to access to a named pipe by the
  client would sometimes cause recoverable exceptions to be raised.


1.10.4
------

[List of PRs / issues for this release](https://github.com/docker/docker-py/milestone/24?closed=1)

### Bugfixes

* Fixed an issue where `RestartPolicy.condition_types.ON_FAILURE` would yield
  an invalid value.
* Fixed an issue where the SSL connection adapter would receive an invalid
  argument.
* Fixed an issue that caused the Client to fail to reach API endpoints when
  the provided `base_url` had a trailing slash.
* Fixed a bug where some `environment` values in `create_container`
  containing unicode characters would raise an encoding error.
* Fixed a number of issues tied with named pipe transport on Windows.
* Fixed a bug where inclusion patterns in `.dockerignore` would cause some
  excluded files to appear in the build context on Windows.

### Miscellaneous

* Adjusted version requirements for the `requests` library.
* It is now possible to run the docker-py test suite on Windows.


1.10.3
------

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.10.3+is%3Aclosed)

### Bugfixes

* Fixed an issue where identity tokens in configuration files weren't handled
  by the library.

### Miscellaneous

* Increased the default number of connection pools from 10 to 25. This number
  can now be configured using the `num_pools` parameter in the `Client`
  constructor.


1.10.2
------

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.10.0+is%3Aclosed)

### Bugfixes

* Updated the docker-pycreds dependency as it was causing issues for some
  users with dependency resolution in applications using docker-py.


1.10.1
------

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.10.0+is%3Aclosed)

### Bugfixes

* The docker.utils.types module was removed in favor of docker.types, but some
  applications imported it explicitly. It has been re-added with an import
  warning advising to use the new module path.

1.10.0
------

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.10.0+is%3Aclosed)

### Features

* Added swarm mode and service management methods. See the documentation for
  details.
* Added support for IPv6 Docker host addresses in the `Client` constructor.
* Added (read-only) support for the Docker credentials store.
* Added support for custom `auth_config` in `Client.push`.
* Added support for `labels` in `Client.create_volume`.
* Added support for `labels` and `enable_ipv6` in `Client.create_network`.
* Added support for `force` param in
  `Client.disconnect_container_from_network`.
* Added support for `pids_limit`, `sysctls`, `userns_mode`, `cpuset_cpus`,
  `cpu_shares`, `mem_reservation` and `kernel_memory` parameters in
  `Client.create_host_config`.
* Added support for `link_local_ips` in `create_endpoint_config`.
* Added support for a `changes` parameter in `Client.import_image`.
* Added support for a `version` parameter in `Client.from_env`.

### Bugfixes

* Fixed a bug where `Client.build` would crash if the `config.json` file
  contained a `HttpHeaders` entry.
* Fixed a bug where passing `decode=True` in some streaming methods would
  crash when the daemon's response had an unexpected format.
* Fixed a bug where `environment` values with unicode characters weren't
  handled properly in `create_container`.
* Fixed a bug where using the `npipe` protocol would sometimes break with
  `ValueError: buffer size must be strictly positive`.

### Miscellaneous

* Fixed an issue where URL-quoting in docker-py was inconsistent with the
  quoting done by the Docker CLI client.
* The client now sends TCP upgrade headers to hint potential proxies about
  connection hijacking.
* The client now defaults to using the `npipe` protocol on Windows.


1.9.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.9.0+is%3Aclosed)

### Features

* Added **experimental** support for Windows named pipes (`npipe://` protocol).
* Added support for Block IO constraints in `Client.create_host_config`. This
  includes parameters `blkio_weight`, `blkio_weight_device`, `device_read_bps`,
  `device_write_bps`, `device_read_iops` and `device_write_iops`.
* Added support for the `internal` param in `Client.create_network`.
* Added support for `ipv4_address` and `ipv6_address` in utils function
  `create_endpoint_config`.
* Added support for custom user agent setting in the `Client` constructor.
  By default, docker-py now also declares itself in the `User-Agent` header.

### Bugfixes

* Fixed an issue where the HTTP timeout on streaming responses would sometimes
  be set incorrectly.
* Fixed an issue where explicit relative paths in `.dockerignore` files were
  not being recognized.

1.8.1
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.8.1+is%3Aclosed)

### Bugfixes

* Fixed a bug where calling `login()` against the default registry would fail
  with the 1.10.x engine
* Fixed a bug where values in environment files would be parsed incorrectly if
  they contained an equal sign.
* Switched to a better supported backport of the `match_hostname` function,
  fixing dependency issues in some environments.


1.8.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.8.0+is%3Aclosed)

### Features

* Added `Client.update_container` method (Update resource configs of a
  container)
* Added support for gzipped context in `Client.build`
* Added ability to specify IP address when connecting a container to a
  network
* Added `tmpfs` support to `Client.create_host_config`
* Added support for the `changes` param in `Client.commit`
* Added support for the `follow` param in `Client.logs`
* Added support for the `check_duplicate` param in `Client.create_network`
* Added support for the `decode` param in `Client.push` and `Client.pull`
* Added `docker.from_env` shortcut function. Instantiates a client with
  `kwargs_from_env`
* `kwargs_from_env` now supports an optional `environment` parameter.
  If present, values will be fetched from this dictionary instead of
  `os.environ`


### Bugfixes

* Fixed a bug where TLS verification would fail when using IP addresses
  in the certificate's `subjectAltName` fields
* Fixed an issue where the default TLS version in TLSConfig would
  break in some environments. `docker-py` now uses TLSv1 by default
  This setting can be overridden using the `ssl_version` param in
  `kwargs_from_env` or the `TLSConfig` constructor
* Fixed a bug where `tcp` hosts would fail to connect to TLS-enabled
  endpoints
* Fixed a bug where loading a valid docker configuration file would fail
* Fixed a bug where some environment variables specified through
  `create_container` would be improperly formatted
* Fixed a bug where using the unix socket connection would raise
  an error in some edge-case situations

### Miscellaneous

* Default API version is now 1.22 (introduced in Docker 1.10.0)


1.7.2
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.7.2+is%3Aclosed)

### Bugfixes

* Fixed a bug where TLS verification was improperly executed when providing
  a custom CA certificate.

1.7.1
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.7.1+is%3Aclosed)

### Features

* Added support for `shm_size` in `Client.create_host_config`

### Bugfixes

* Fixed a bug where Dockerfile would sometimes be excluded from the build
  context.
* Fixed a bug where a docker config file containing unknown keys would raise
  an exception.
* Fixed an issue with SSL connections behaving improperly when pyOpenSSL
  was installed in the same environment.
* Several TLS configuration improvements


1.7.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.7.0+is%3Aclosed)

### Features

* Added support for cusom IPAM configuration in `Client.create_network`
* Added input support to `Client.exec_create`
* Added support for `stop_signal` in `Client.create_host_config`
* Added support for custom HTTP headers in Docker config file.
* Added support for unspecified transfer protocol in `base_url` when TLS is
  enabled.


### Bugfixes

* Fixed a bug where the `filters` parameter in `Client.volumes` would not be
  applied properly.
* Fixed a bug where memory limits would parse to incorrect values.
* Fixed a bug where the `devices` parameter in `Client.create_host_config`
  would sometimes be misinterpreted.
* Fixed a bug where instantiating a `Client` object would sometimes crash if
  `base_url` was unspecified.
* Fixed a bug where an error message related to TLS configuration would link
  to a non-existent (outdated) docs page.


### Miscellaneous

* Processing of `.dockerignore` has been made significantly faster.
* Dropped explicit support for Python 3.2

1.6.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.6.0+is%3Aclosed)

### Features

* Added support for the `since` param in `Client.logs` (introduced in API
  version 1.19)
* Added support for the `DOCKER_CONFIG` environment variable when looking up
  auth config
* Added support for the `stream` param in `Client.stats` (when set to `False`,
  allows user to retrieve a single snapshot instead of a constant data stream)
* Added support for the `mem_swappiness`, `oom_kill_disable` params
  in `Client.create_host_config`
* Added support for build arguments in `Client.build` through the `buildargs`
  param.


### Bugfixes

* Fixed a bug where streaming data over HTTPS would sometimes behave
  incorrectly with Python 3.x
* Fixed a bug where commands containing unicode characters would be incorrectly
  handled by `Client.create_container`.
* Fixed a bug where auth config credentials containing unicode characters would
  cause failures when pushing / pulling images.
* Setting `tail=0` in `Client.logs` no longer shows past logs.
* Fixed a bug where `Client.pull` and `Client.push` couldn't handle image names
  containing a dot.


### Miscellaneous

* Default API version is now 1.21 (introduced in Docker 1.9.0)
* Several test improvements and cleanup that should make the suite easier to
  expand and maintain moving forward.


1.5.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.5.0+is%3Aclosed)

### Features

* Added support for the networking API introduced in Docker 1.9.0
  (`Client.networks`, `Client.create_network`, `Client.remove_network`,
  `Client.inspect_network`, `Client.connect_container_to_network`,
  `Client.disconnect_container_from_network`).
* Added support for the volumes API introduced in Docker 1.9.0
  (`Client.volumes`, `Client.create_volume`, `Client.inspect_volume`,
  `Client.remove_volume`).
* Added support for the `group_add` parameter in `create_host_config`.
* Added support for the CPU CFS (`cpu_quota` and `cpu_period`) parameteres
  in `create_host_config`.
* Added support for the archive API endpoint (`Client.get_archive`,
  `Client.put_archive`).
* Added support for `ps_args` parameter in `Client.top`.


### Bugfixes

* Fixed a bug where specifying volume binds with unicode characters would
  fail.
* Fixed a bug where providing an explicit protocol in `Client.port` would fail
  to yield the expected result.
* Fixed a bug where the priority protocol returned by `Client.port` would be UDP
  instead of the expected TCP.

### Miscellaneous

* Broke up Client code into several files to facilitate maintenance and
  contribution.
* Added contributing guidelines to the repository.

1.4.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.4.0+is%3Aclosed)

### Deprecation warning

* `docker.utils.create_host_config` is deprecated in favor of
  `Client.create_host_config`.

### Features

* Added `utils.parse_env_file` to support env-files.
  See [docs](https://docker-py.readthedocs.io/en/latest/api/#create_container)
  for usage.
* Added support for arbitrary log drivers
* Added support for URL paths in the docker host URL (`base_url`)
* Drastically improved support for .dockerignore syntax

### Bugfixes

* Fixed a bug where exec_inspect would allow invocation when the API version
  was too low.
* Fixed a bug where `docker.utils.ports.split_port` would break if an open
  range was provided.
* Fixed a bug where invalid image IDs / container IDs could be provided to
  bypass or reroute request URLs
* Default `base_url` now adapts depending on the OS (better Windows support)
* Fixed a bug where using an integer as the user param in
  `Client.create_container` would result in a failure.

### Miscellaneous

* Docs fixes
* Integration tests are now run as part of our continuous integration.
* Updated dependency on `six` library

1.3.1
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.3.1+is%3Aclosed)

### Bugfixes

* Fixed a bug where empty chunks in streams was misinterpreted as EOF.
* `datetime` arguments passed to `Client.events` parameters `since` and
  `until` are now always considered to be UTC.
* Fixed a bug with Docker 1.7.x where the wrong auth headers were being passed
  in `Client.build`, failing builds that depended on private images.
* `Client.exec_create` can now retrieve the `Id` key from a dictionary for its
  container param.

### Miscellaneous

* 404 API status now raises `docker.errors.NotFound`. This exception inherits
  `APIError` which was used previously.
* Docs fixes
* Test fixes

1.3.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.3.0+is%3Aclosed)

### Deprecation warning

* As announced in the 1.2.0 release, `Client.execute` has been removed in favor
  of `Client.exec_create` and `Client.exec_start`.

### Features

* `extra_hosts` parameter in host config can now also be provided as a list.
* Added support for `memory_limit` and `memswap_limit` in host config to
  comply with recent deprecations.
* Added support for `volume_driver` in `Client.create_container`
* Added support for advanced modes in volume binds (using the `mode` key)
* Added support for `decode` in `Client.build` (decodes JSON stream on the fly)
* docker-py will now look for login configuration under the new config path,
  and fall back to the old `~/.dockercfg` path if not present.

### Bugfixes

* Configuration file lookup now also work on platforms that don't define a
  `$HOME` environment variable.
* Fixed an issue where pinging a v2 private registry wasn't working properly,
  preventing users from pushing and pulling.
* `pull` parameter in `Client.build` now defaults to `False`. Fixes a bug where
  the default options would try to force a pull of non-remote images.
* Fixed a bug where getting logs from tty-enabled containers wasn't working
  properly with more recent versions of Docker
* `Client.push` and `Client.pull` will now raise exceptions if the HTTP
  status indicates an error.
* Fixed a bug with adapter lookup when using the Unix socket adapter
  (this affected some weird edge cases, see issue #647 for details)
* Fixed a bug where providing `timeout=None` to `Client.stop` would result
  in an exception despite the usecase being valid.
* Added `git@` to the list of valid prefixes for remote build paths.

### Dependencies

* The websocket-client dependency has been updated to a more recent version.
  This new version also supports Python 3.x, making `attach_socket` available
  on those versions as well.

### Documentation

* Various fixes

1.2.3
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.2.3+is%3Aclosed)

### Deprecation warning

* Passing host config in the `Client.start` method is now deprecated. Please
  use the `host_config` in `Client.create_container` instead.

### Features

* Added support for `privileged` param in `Client.exec_create`
  (only available in API >= 1.19)
* Volume binds can now also be specified as a list of strings.

### Bugfixes

* Fixed a bug where the `read_only` param in host_config wasn't handled
  properly.
* Fixed a bug in `Client.execute` (this method is still deprecated).
* The `cpuset` param in `Client.create_container` is also passed as
  the `CpusetCpus` param (`Cpuset` deprecated in recent versions of the API)
* Fixed an issue with integration tests being run inside a container
  (`make integration-test`)
* Fixed a bug where an empty string would be considered a valid container ID
  or image ID.
* Fixed a bug in `Client.insert`


### Documentation

* Various fixes

1.2.2
-----

### Bugfixes

* Fixed a bug where parameters passed to `Client.exec_resize` would be ignored (#576)
* Fixed a bug where auth config wouldn't be resolved properly in `Client.pull` (#577)

1.2.1
-----

### Bugfixes

* Fixed a bug where the check_resource decorator would break with some
  argument-passing methods. (#573)

1.2.0
-----

[List of PRs / issues for this release](https://github.com/docker/docker-py/issues?q=milestone%3A1.2.0+is%3Aclosed)

### Deprecation warning

* `Client.execute` is being deprecated in favor of the more dev-friendly
  `Client.exec_start` and `Client.exec_create`. **It will be removed in 1.3.0**

### Features

* Added `exec_create`, `exec_start`, `exec_inspect` and `exec_resize` to
  client, accurately mirroring the
  [Exec API](https://docs.docker.com/reference/api/docker_remote_api_v1.18/#exec-create)
* Added `auth_config` param to `Client.pull` (allows to use one-off credentials
  for this pull request)
* Added support for `ipc_mode` in host config.
* Added support for the `log_config` param in host config.
* Added support for the `ulimit` param in host config.
* Added support for container resource limits in `Client.build`.
* When a resource identifier (image or container ID) is passed to a Client
  method, we now check for `None` values to avoid crashing
  (now raises `docker.errors.NullResource`)
* Added tools to parse port ranges inside the new `docker.utils.ports` package.
* Added a `version_info` attribute to the `docker` package.

### Bugfixes

* Fixed a bug in `Client.port` where absence of a certain key in the
  container's JSON would raise an error (now just returns `None`)
* Fixed a bug with the `trunc` parameter in `Client.containers` having no
  effect (moved functionality to the client)
* Several improvements have been made to the `Client.import_image` method.
* Fixed pushing / pulling to
  [v2 registries](https://github.com/docker/distribution)
* Fixed a bug where passing a container dictionary to `Client.commit`
  would fail

### Miscellaneous

* Default API version has been bumped to 1.18 (Docker Engine 1.6.0)
* Several testing coverage improvements
* Docs fixes and improvements

1.1.0
-----

### Features

* Added `dockerfile` param support to `Client.build` (mirrors
  `docker build -f` behavior)
* Added the ability to specify `'auto'` as `version` in `Client.__init__`,
  allowing the constructor to autodetect the daemon's API version.

### Bugfixes

* Fixed a bug where decoding a result stream using the `decode` parameter
  would break when using Python 3.x
* Fixed a bug where some files in `.dockerignore` weren't being handled
  properly
* Fixed `resolve_authconfig` issues by bringing it closer to Docker Engine's
  behavior. This should fix all issues encountered with private registry auth
* Fixed an issue where passwords containing a colon weren't being handled
  properly.
* Bumped `requests` version requirement, which should fix most of the SSL
  issues encountered recently.

### Miscellaneous

* Several integration test improvements.
* Fixed some unclosed resources in unit tests.
* Several docs improvements.

1.0.0
-----

### Features

* Added new `Client.rename` method (`docker rename`)
* Added now `Client.stats` method (`docker stats`)
* Added `read_only` param support to `utils.create_host_config` and
  `Client.start` (`docker run --read-only`)
* Added `pid_mode` param support to `utils.create_host_config` and
  `Client.start` (`docker run --pid='host'`)
* Added `since`, `until` and `filters` params to `Client.events`.
* Added `decode` parameter to `Client.stats` and `Client.events` to decode
  JSON objects on the fly (False by default).

### Bugfixes

* Fixed a bug that caused `Client.build` to crash when the provided source was
  a remote source.

### Miscellaneous

* Default API version has been bumped to 1.17 (Docker Engine 1.5.0)
* `Client.timeout` is now a public attribute, and users are encouraged to use it
  when request timeouts need to be changed at runtime.
* Added `Client.api_version` as a read-only property.
* The `memswap_limit` argument in `Client.create_container` now accepts string
  type values similar to `mem_limit` ('6g', '120000k', etc.)
* Improved documentation

0.7.2
-----

### Features

* Added support for `mac_address` in `Client.create_container`

### Bugfixes

* Fixed a bug where streaming responses (`pull`, `push`, `logs`, etc.) were
  unreliable (#300)
* Fixed a bug where resolve_authconfig wouldn't properly resolve configuration
  for private repositories (#468)
* Fixed a bug where some errors wouldn't be properly constructed in
  `client.py`, leading to unhelpful exceptions bubbling up (#466)
* Fixed a bug where `Client.build` would try to close context when externally
  provided (`custom_context == True`) (#458)
* Fixed an issue in `create_host_config` where empty sequences wouldn't be
  interpreted properly (#462)

### Miscellaneous

* Added `resolve_authconfig` tests.

0.7.1
-----

### Bugfixes

* `setup.py` now indicates a maximum version of requests to work around the
  boot2docker / `assert_hostname` bug.
* Removed invalid exception when using the Registry Hub's FQDN when pulling.
* Fixed an issue where early HTTP errors weren't handled properly in streaming
  responses.
* Fixed a bug where sockets would close unexpectedly using Python 3.x
* Various fixes for integration tests.

### Miscellaneous

* Small doc fixes

0.7.0
-----

### Breaking changes

* Passing `dns` or `volumes_from` in `Client.start` with API version < 1.10
  will now raise an exception (previously only triggered a warning)

### Features

* Added support for `host_config` in `Client.create_container`
* Added utility method `docker.utils.create_host_config` to help build a
  proper `HostConfig` dictionary.
* Added support for the `pull` parameter in `Client.build`
* Added support for the `forcerm` parameter in `Client.build`
* Added support for `extra_hosts` in `Client.start`
* Added support for a custom `timeout` in `Client.wait`
* Added support for custom `.dockercfg` loading in `Client.login`
  (`dockercfg_path` argument)

### Bugfixes

* Fixed a bug where some output wouldn't be streamed properly in streaming
  chunked responses
* Fixed a bug where the `devices` param didn't recognize the proper delimiter
* `Client.login` now properly expands the `registry` URL if provided.
* Fixed a bug where unicode characters in passed for `environment` in
  `create_container` would break.

### Miscellaneous

* Several unit tests and integration tests improvements.
* `Client` constructor now enforces passing the `version` parameter as a
  string.
* Build context files are now ordered by filename when creating the archive
  (for consistency with docker mainline behavior)

0.6.0
-----
* **This version introduces breaking changes!**

### Breaking changes

* The default SSL protocol is now the highest TLS v1.x (was SSL v2.3 before)
  (Poodle fix)
* The `history` command now returns a dict instead of a raw JSON string.

### Features

* Added the `execute` command.
* Added `pause` and `unpause` commands.
* Added support fo the `cpuset` param in `create_container`
* Added support for host devices (`devices` param in `start`)
* Added support for the `tail` param in `logs`.
* Added support for the `filters` param in `images` and `containers`
* The `kwargs_from_env` method is now available in the `docker.utils`
  module. This should make it easier for boot2docker user to connect
  to their daemon.

### Bugfixes

* Fixed a bug where empty directories weren't correctly included when
  providing a context to `Client.build`.
* Fixed a bug where UNIX socket connections weren't properly cleaned up,
  causing `ResourceWarning`s to appear in some cases.
* Fixed a bug where docker-py would crash if the docker daemon was stopped
  while reading a streaming response
* Fixed a bug with streaming responses in Python 3
* `remove_image` now supports a dict containing an `Id` key as its `id`
  parameter (similar to other methods requiring a resource ID)

### Documentation

* Added new MkDocs documentation. Currently hosted on
  [ReadTheDocs](https://docker-py.readthedocs.io/en/latest/)

### Miscellaneous

* Added tests to sdist
* Added a Makefile for running tests in Docker
* Updated Dockerfile

0.5.3
-----

* Fixed attaching when connecting to the daemon over a UNIX socket.

0.5.2
-----

* Fixed a bug where sockets were closed immediately when attaching over
  TLS.

0.5.1
-----

* Added a `assert_hostname` option to `TLSConfig` which can be used to
  disable verification of hostnames.
* Fixed SSL not working due to an incorrect version comparison
* Fixed streams not working on Windows

0.5.0
-----

* **This version introduces breaking changes!**
* Added `insecure_registry` parameter in `Client.push` and `Client.pull`.
  *It defaults to False and code pushing to non-HTTPS private registries
  might break as a result.*
* Added support for adding and dropping capabilities
* Added support for restart policy
* Added support for string values in `Client.create_container`'s `mem_limit`
* Added support for `.dockerignore` file in `Client.build`

### Bugfixes

* Fixed timeout behavior in `Client.stop`

### Miscellaneous

* `Client.create_container` provides better validation of the `volumes`
  parameter
* Improved integration tests

0.4.0
-----

* **This version introduces breaking changes!**
* The `base_url` parameter in the `Client` constructor should now allow most
  of the `DOCKER_HOST` environment values (except for the fd:// protocol)
    * As a result, URLs that don't specify a port are now invalid (similar
    to the official client's behavior)
* Added TLS support (see [documentation](https://github.com/dotcloud/docker-py#connection-to-daemon-using-https))

### Bugfixes

* Fixed an issue with `Client.build` streamed logs in Python 3

### Miscellaneous

* Added unit tests coverage
* Various integration tests fixes

0.3.2
-----

* Default API version is now 1.12 (support for docker 1.0)
* Added new methods `Client.get_image` and `Client.load_image`
  (`docker save` and `docker load`)
* Added new method `Client.ping`
* Added new method `Client.resize`
* `Client.build` can now be provided with a custom context using the
  `custom_context` parameter.
* Added support for `memswap_limit` parameter in `create_container`
* Added support for `force` parameter in `remove_container`
* Added support for `force` and `noprune` parameters in `remove_image`
* Added support for `timestamps` parameter in `logs`
* Added support for `dns_search` parameter in `start`
* Added support for `network_mode` parameter in `start`
* Added support for `size` parameter in `containers`
* Added support for `volumes_from` and `dns` parameters in `start`. As of
  API version >= 1.10, these parameters no longer belong to `create_container`
* `Client.logs` now uses the logs endpoint when API version is sufficient

### Bugfixes

* Fixed a bug in pull where the `repo:tag` notation wasn't interpreted
  properly
* Fixed a bug in streaming methods with python 3 (unicode, bytes/str related)
* Fixed a bug in `Client.start` where legacy notation for volumes wasn't
  supported anymore.

### Miscellaneous

* The client now raises `DockerException`s when appropriate. You can import
  `DockerException` (and its subclasses) from the `docker.errors` module to
  catch them if needed.
* `docker.APIError` has been moved to the new `docker.errors` module as well.
* `Client.insert` is deprecated in API version > 1.11
* Improved integration tests should now run much faster.
* There is now a single source of truth for the docker-py version number.

0.3.1
-----

* Default API version is now 1.9
* Streaming responses no longer yield blank lines.
* `Client.create_container` now supports the `domainname` parameter.
* `volumes_from` parameter in `Client.create_container` now supports
  iterables.
* Auth credentials are provided to the docker daemon when using `Client.build`
  (new feature in API version 1.9)


### Bugfixes

* Various fixes for response streams (`logs`, `pull`, etc.).
* Fixed a bug with `Client.push` when using API version < 1.5
* Fixed a bug with API version checks.

### Miscellaneous

* `mock` has been removed from the runtime requirements.
* Added installation instructions in the README.

0.3.0
-----

* **This version introduces breaking changes!**
* Support for API version 1.7 through 1.9 (Docker 0.8.0+)
* Default API version is now 1.8
* The client has been updated to support Requests 2.x. `requests==2.2.1`
  is now the recommended version.
* Links can now be specified as tuples in `Client.start` (see docs for
  more information)
* Added support for various options in `Client.create_container`
  (`network_disabled`, `cpu_shares`, `working_dir` and `entrypoint`)
* `Client.attach` has been reworked to work similarly to `Client.logs`
  minus the historical data.
* Logs can now be streamed using the `stream` parameter.
* Added support for `tcp://` URLs as client `base_url`.
* Various auth improvements.
* Added support for custom `Client.build` timeout.


### Bugfixes

* Fixed a bug where determining the protocol of a private registry
  would sometimes yield the wrong result.
* Fixed a bug where `Client.copy` wouldn't accept a dict as argument.
* Fixed several streaming bugs.
* Removed unused parameter in `Client.import_image`.
* The client's `base_url` now tolerates trailing slashes.

#### Miscellaneous

* Updated integration tests
* Small doc fixes

0.2.3
-----

* Support for API version 1.6
* Added support for links
* Added support for global request timeout
* Added `signal` parameter in `Client.kill`
* Added support for `publish_all_ports` in `Client.start`
* `Client.pull`, `Client.push` and `Client.build` can be streamed now
* Added support for websockets in `Client.attach`
* Fixed ports for Docker 0.6.5+
* Added `Client.events` method (access to the `/events` endpoint)
* Changed the way the ports and volumes are provided in `Client.start` and
  `Client.create_container̀` to make them simpler and more intuitive.

### Bugfixes

* Fixed a bug where private registries on HTTPS weren't handled properly
* Fixed a bug where auth would break with Python 3

### Miscellaneous

* Test improvements
* Slight doc improvements


0.2.2
-----

* Added support for the `rm` parameter in `Client.build`
* Added support for tarball imports in `Client.import_image` through `data`
  parameter.
* The `command` parameter in `Client.create_container` is now optional (for
  containers that include a default run command)

### Bugfixes

* Fixed Python 3 support
* Fixed a bug where anonymous push/pull would break when no authconfig is
  present
* Fixed a bug where the `quiet` parameter wouldn't be taken into account in
  `Client.containers`
* Fixed a bug where `Client.push` would break when pushing to private
  registries.
* Removed unused `registry` parameter in `Client.pull`.
* Removed obsolete custom error message in `Client.create_container`.

### Miscellaneous

* docker-py is now unit-tested, and Travis-CI has been enabled on the
  source repository.

0.2.1
-----

* Improvements to the `tox.ini` file

### Bugfixes

* Fixed a bug where the package would fail with an `ImportError` if requests
  was installed using `apt-get`
* Fixed a bug where `Client.build` would fail if given a `path` parameter.
* Fixed several bugs in `Client.login`. It should now work with API versions
  1.4, 1.5.
* Please note that `Client.login` currently doesn't write auth to the
  `.dockercfg` file, thus **auth is not persistent when using this method.**

0.2.0
-----

* **This version introduces breaking changes!**
* `Client.kill`, `Client.remove_container`, `Client.remove_image`,
`Client.restart`, `Client.start`, `Client.stop` and `Client.wait` don't support
varargs anymore.
* Added commands `Client.top` and `Client.copy`
* Added `lxc_conf` parameter to `Client.start`
* Added support for authentication in `Client.pull` (API version >=1.5)
* Added support for privileged containers.
* Error management overhaul. The new version should be more consistent and
* All methods that expected a container ID as argument now also support a dict
containing an `Id` key.
* Added license header to python files.
* Several `README.md` updates.

### Bugfixes

* Fixed several bugs with auth config parsing.
* Fixed a bug in `Client.push` where it would raise an exception if
the auth config wasn't loaded.
* Fixed a bug in `Client.pull` where private registry images wouldn't be parsed
properly if it contained port information.


0.1.5
-----

* `Client.build` now uses tempfiles to store build context instead of storing
it in memory
* Added `nocache` option to `Client.build`
* `Client.remove_container` now raises an exception when trying to remove a
running container
* `Client.create_container` now accepts dicts for the `environment` parameter

### Bugfixes

* Fixed a bug in `Client.create_container` on Python 2.6 where unicode
commands would fail to be parsed
* Fixed a bug in `Client.build` where the `tag` parameter would not be taken
into account

0.1.4
-----

* Added support for API connection through UNIX socket (default for docker 0.5.2+)

0.1.3
-----

* The client now tries to load the auth config from `~/.dockercfg`. This is necessary to use the push command if API version is >1.0

0.1.2
-----

* Added a `quiet parameter` to `Client.build` (mirrors the `q` parameter in the API)

0.1.1
-----

* Fixed a bug where the build command would list tar contents before sending the request
* Fixed a bug in `Client.port`


0.1.0
-----
* **This version introduces breaking changes!**
* Switched to server side build system
* Removed the BuilderClient
* Added support for contextual builds
* Added support for remote URL builds
* Added python 3 support
* Added bind mounts support
* Added API version support
* Fixed a bug where `Client.port` would fail if provided with a port of type number
* Fixed a bug where `Client._post_json` wouldn't set the Content-Type header to `application/json`

0.0.6
-----
* Added support for custom loggers in `Client.build`
* Added `Client.attach` command
* Added support for `ADD` command in builder
* Fixed a bug in `Client.logs`
* Improved unit tests


0.0.5
-----
* Added tag support for the builder
* Use `shlex` to parse plain string commands when creating a container
* Fixed several bugs in the builder
* Fixed the `quiet` option in `Client.images`
* Unit tests

0.0.4
-----
* Improved error reporting

0.0.3
-----
* Fixed a bug in `Client.tag`
* Fixed a bug where generated images would be removed after a successful build

0.0.2
-----
* Implemented first version of the builder client