diff options
Diffstat (limited to 'lib')
-rw-r--r-- | lib/easy.c | 70 | ||||
-rw-r--r-- | lib/sendf.c | 169 | ||||
-rw-r--r-- | lib/sendf.h | 2 |
3 files changed, 105 insertions, 136 deletions
diff --git a/lib/easy.c b/lib/easy.c index b547d1dbe..619312b79 100644 --- a/lib/easy.c +++ b/lib/easy.c @@ -1026,73 +1026,15 @@ CURLcode curl_easy_pause(CURL *curl, int action) /* we have a buffer for sending that we now seem to be able to deliver since the receive pausing is lifted! */ - /* get the pointer, type and length in local copies since the function may - return PAUSE again and then we'll get a new copy allocted and stored in + /* get the pointer in local copy since the function may return PAUSE + again and then we'll get a new copy allocted and stored in the tempwrite variables */ char *tempwrite = data->state.tempwrite; - char *freewrite = tempwrite; /* store this pointer to free it later */ - size_t tempsize = data->state.tempwritesize; - int temptype = data->state.tempwritetype; - size_t chunklen; - - /* clear tempwrite here just to make sure it gets cleared if there's no - further use of it, and make sure we don't clear it after the function - invoke as it may have been set to a new value by then */ - data->state.tempwrite = NULL; - - /* since the write callback API is define to never exceed - CURL_MAX_WRITE_SIZE bytes in a single call, and since we may in fact - have more data than that in our buffer here, we must loop sending the - data in multiple calls until there's no data left or we get another - pause returned. - - A tricky part is that the function we call will "buffer" the data - itself when it pauses on a particular buffer, so we may need to do some - extra trickery if we get a pause return here. - */ - do { - chunklen = (tempsize > CURL_MAX_WRITE_SIZE)?CURL_MAX_WRITE_SIZE:tempsize; - - result = Curl_client_write(data->easy_conn, - temptype, tempwrite, chunklen); - if(result) - /* failures abort the loop at once */ - break; - - if(data->state.tempwrite && (tempsize - chunklen)) { - /* Ouch, the reading is again paused and the block we send is now - "cached". If this is the final chunk we can leave it like this, but - if we have more chunks that are cached after this, we need to free - the newly cached one and put back a version that is truly the entire - contents that is saved for later - */ - char *newptr; - - /* note that tempsize is still the size as before the callback was - used, and thus the whole piece of data to keep */ - newptr = realloc(data->state.tempwrite, tempsize); - - if(!newptr) { - free(data->state.tempwrite); /* free old area */ - data->state.tempwrite = NULL; - result = CURLE_OUT_OF_MEMORY; - /* tempwrite will be freed further down */ - break; - } - data->state.tempwrite = newptr; /* store new pointer */ - memcpy(newptr, tempwrite, tempsize); - data->state.tempwritesize = tempsize; /* store new size */ - /* tempwrite will be freed further down */ - break; /* go back to pausing until further notice */ - } - else { - tempsize -= chunklen; /* left after the call above */ - tempwrite += chunklen; /* advance the pointer */ - } - } while(!result && tempsize); - - free(freewrite); /* this is unconditionally no longer used */ + data->state.tempwrite = NULL; + result = Curl_client_chop_write(data->easy_conn, data->state.tempwritetype, + tempwrite, data->state.tempwritesize); + free(tempwrite); } /* if there's no error and we're not pausing both directions, we want diff --git a/lib/sendf.c b/lib/sendf.c index 469496c06..2d1a166bd 100644 --- a/lib/sendf.c +++ b/lib/sendf.c @@ -374,25 +374,21 @@ static CURLcode pausewrite(struct SessionHandle *data, } -/* Curl_client_write() sends data to the write callback(s) - - The bit pattern defines to what "streams" to write to. Body and/or header. - The defines are in sendf.h of course. - - If CURL_DO_LINEEND_CONV is enabled, data is converted IN PLACE to the - local character encoding. This is a problem and should be changed in - the future to leave the original data alone. +/* Curl_client_chop_write() writes chunks of data not larger than + * CURL_MAX_WRITE_SIZE via client write callback(s) and + * takes care of pause requests from the callbacks. */ -CURLcode Curl_client_write(struct connectdata *conn, - int type, - char *ptr, - size_t len) +CURLcode Curl_client_chop_write(struct connectdata *conn, + int type, + char * ptr, + size_t len) { struct SessionHandle *data = conn->data; - size_t wrote; + curl_write_callback writeheader = NULL; + curl_write_callback writebody = NULL; - if(0 == len) - len = strlen(ptr); + if(!len) + return CURLE_OK; /* If reading is actually paused, we're forced to append this chunk of data to the already held data, but only if it is the same type as otherwise it @@ -417,78 +413,107 @@ CURLcode Curl_client_write(struct connectdata *conn, /* update the pointer and the size */ data->state.tempwrite = newptr; data->state.tempwritesize = newlen; - return CURLE_OK; } - if(type & CLIENTWRITE_BODY) { - if((conn->handler->protocol&PROTO_FAMILY_FTP) && - conn->proto.ftpc.transfertype == 'A') { - /* convert from the network encoding */ - CURLcode result = Curl_convert_from_network(data, ptr, len); - /* Curl_convert_from_network calls failf if unsuccessful */ - if(result) - return result; + /* Determine the callback(s) to use. */ + if(type & CLIENTWRITE_BODY) + writebody = data->set.fwrite_func; + if((type & CLIENTWRITE_HEADER) && + (data->set.fwrite_header || data->set.writeheader)) { + /* + * Write headers to the same callback or to the especially setup + * header callback function (added after version 7.7.1). + */ + writeheader = + data->set.fwrite_header? data->set.fwrite_header: data->set.fwrite_func; + } + + /* Chop data, write chunks. */ + while(len) { + size_t chunklen = len <= CURL_MAX_WRITE_SIZE? len: CURL_MAX_WRITE_SIZE; -#ifdef CURL_DO_LINEEND_CONV - /* convert end-of-line markers */ - len = convert_lineends(data, ptr, len); -#endif /* CURL_DO_LINEEND_CONV */ - } - /* If the previous block of data ended with CR and this block of data is - just a NL, then the length might be zero */ - if(len) { - wrote = data->set.fwrite_func(ptr, 1, len, data->set.out); - } - else { - wrote = len; - } + if(writebody) { + size_t wrote = writebody(ptr, 1, chunklen, data->set.out); - if(CURL_WRITEFUNC_PAUSE == wrote) { - if(conn->handler->flags & PROTOPT_NONETWORK) { - /* Protocols that work without network cannot be paused. This is - actually only FILE:// just now, and it can't pause since the - transfer isn't done using the "normal" procedure. */ - failf(data, "Write callback asked for PAUSE when not supported!"); + if(CURL_WRITEFUNC_PAUSE == wrote) { + if(conn->handler->flags & PROTOPT_NONETWORK) { + /* Protocols that work without network cannot be paused. This is + actually only FILE:// just now, and it can't pause since the + transfer isn't done using the "normal" procedure. */ + failf(data, "Write callback asked for PAUSE when not supported!"); + return CURLE_WRITE_ERROR; + } + else + return pausewrite(data, type, ptr, len); + } + else if(wrote != chunklen) { + failf(data, "Failed writing body (%zu != %zu)", wrote, chunklen); return CURLE_WRITE_ERROR; } - else - return pausewrite(data, type, ptr, len); - } - else if(wrote != len) { - failf(data, "Failed writing body (%zu != %zu)", wrote, len); - return CURLE_WRITE_ERROR; } - } - if((type & CLIENTWRITE_HEADER) && - (data->set.fwrite_header || data->set.writeheader) ) { - /* - * Write headers to the same callback or to the especially setup - * header callback function (added after version 7.7.1). - */ - curl_write_callback writeit= - data->set.fwrite_header?data->set.fwrite_header:data->set.fwrite_func; - - /* Note: The header is in the host encoding - regardless of the ftp transfer mode (ASCII/Image) */ - - wrote = writeit(ptr, 1, len, data->set.writeheader); - if(CURL_WRITEFUNC_PAUSE == wrote) - /* here we pass in the HEADER bit only since if this was body as well - then it was passed already and clearly that didn't trigger the pause, - so this is saved for later with the HEADER bit only */ - return pausewrite(data, CLIENTWRITE_HEADER, ptr, len); - - if(wrote != len) { - failf (data, "Failed writing header"); - return CURLE_WRITE_ERROR; + if(writeheader) { + size_t wrote = writeheader(ptr, 1, chunklen, data->set.writeheader); + + if(CURL_WRITEFUNC_PAUSE == wrote) + /* here we pass in the HEADER bit only since if this was body as well + then it was passed already and clearly that didn't trigger the + pause, so this is saved for later with the HEADER bit only */ + return pausewrite(data, CLIENTWRITE_HEADER, ptr, len); + + if(wrote != chunklen) { + failf (data, "Failed writing header"); + return CURLE_WRITE_ERROR; + } } + + ptr += chunklen; + len -= chunklen; } return CURLE_OK; } + +/* Curl_client_write() sends data to the write callback(s) + + The bit pattern defines to what "streams" to write to. Body and/or header. + The defines are in sendf.h of course. + + If CURL_DO_LINEEND_CONV is enabled, data is converted IN PLACE to the + local character encoding. This is a problem and should be changed in + the future to leave the original data alone. + */ +CURLcode Curl_client_write(struct connectdata *conn, + int type, + char *ptr, + size_t len) +{ + struct SessionHandle *data = conn->data; + + if(0 == len) + len = strlen(ptr); + + /* FTP data may need conversion. */ + if((type & CLIENTWRITE_BODY) && + (conn->handler->protocol & PROTO_FAMILY_FTP) && + conn->proto.ftpc.transfertype == 'A') { + /* convert from the network encoding */ + CURLcode result = Curl_convert_from_network(data, ptr, len); + /* Curl_convert_from_network calls failf if unsuccessful */ + if(result) + return result; + +#ifdef CURL_DO_LINEEND_CONV + /* convert end-of-line markers */ + len = convert_lineends(data, ptr, len); +#endif /* CURL_DO_LINEEND_CONV */ + } + + return Curl_client_chop_write(conn, type, ptr, len); +} + CURLcode Curl_read_plain(curl_socket_t sockfd, char *buf, size_t bytesfromsocket, diff --git a/lib/sendf.h b/lib/sendf.h index 23c720661..86f06cf9b 100644 --- a/lib/sendf.h +++ b/lib/sendf.h @@ -51,6 +51,8 @@ void Curl_failf(struct SessionHandle *, const char *fmt, ...); #define CLIENTWRITE_HEADER (1<<1) #define CLIENTWRITE_BOTH (CLIENTWRITE_BODY|CLIENTWRITE_HEADER) +CURLcode Curl_client_chop_write(struct connectdata *conn, int type, char *ptr, + size_t len) WARN_UNUSED_RESULT; CURLcode Curl_client_write(struct connectdata *conn, int type, char *ptr, size_t len) WARN_UNUSED_RESULT; |