summaryrefslogtreecommitdiff
path: root/lib/curl_url.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/curl_url.c')
-rw-r--r--lib/curl_url.c5423
1 files changed, 5423 insertions, 0 deletions
diff --git a/lib/curl_url.c b/lib/curl_url.c
new file mode 100644
index 000000000..52badc5d7
--- /dev/null
+++ b/lib/curl_url.c
@@ -0,0 +1,5423 @@
+/***************************************************************************
+ * _ _ ____ _
+ * Project ___| | | | _ \| |
+ * / __| | | | |_) | |
+ * | (__| |_| | _ <| |___
+ * \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at http://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+
+#include "curl_setup.h"
+
+#ifdef HAVE_NETINET_IN_H
+#include <netinet/in.h>
+#endif
+#ifdef HAVE_NETDB_H
+#include <netdb.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#include <arpa/inet.h>
+#endif
+#ifdef HAVE_NET_IF_H
+#include <net/if.h>
+#endif
+#ifdef HAVE_SYS_IOCTL_H
+#include <sys/ioctl.h>
+#endif
+
+#ifdef HAVE_SYS_PARAM_H
+#include <sys/param.h>
+#endif
+
+#ifdef __VMS
+#include <in.h>
+#include <inet.h>
+#endif
+
+#ifndef HAVE_SOCKET
+#error "We can't compile without socket() support!"
+#endif
+
+#ifdef HAVE_LIMITS_H
+#include <limits.h>
+#endif
+
+#ifdef USE_LIBIDN
+#include <idna.h>
+#include <tld.h>
+#include <stringprep.h>
+#ifdef HAVE_IDN_FREE_H
+#include <idn-free.h>
+#else
+/* prototype from idn-free.h, not provided by libidn 0.4.5's make install! */
+void idn_free (void *ptr);
+#endif
+#ifndef HAVE_IDN_FREE
+/* if idn_free() was not found in this version of libidn use free() instead */
+#define idn_free(x) (free)(x)
+#endif
+#elif defined(USE_WIN32_IDN)
+/* prototype for curl_win32_idn_to_ascii() */
+int curl_win32_idn_to_ascii(const char *in, char **out);
+#endif /* USE_LIBIDN */
+
+#include "curl_urldata.h"
+#include "curl_netrc.h"
+
+#include "curl_formdata.h"
+#include "curl_sslgen.h"
+#include "curl_hostip.h"
+#include "curl_transfer.h"
+#include "curl_sendf.h"
+#include "curl_progress.h"
+#include "curl_cookie.h"
+#include "curl_strequal.h"
+#include "curl_strerror.h"
+#include "curl_escape.h"
+#include "curl_strtok.h"
+#include "curl_share.h"
+#include "curl_content_encoding.h"
+#include "curl_http_digest.h"
+#include "curl_http_negotiate.h"
+#include "curl_select.h"
+#include "curl_multiif.h"
+#include "curl_easyif.h"
+#include "curl_speedcheck.h"
+#include "curl_rawstr.h"
+#include "curl_warnless.h"
+#include "curl_non_ascii.h"
+#include "curl_inet_pton.h"
+
+/* And now for the protocols */
+#include "curl_ftp.h"
+#include "curl_dict.h"
+#include "curl_telnet.h"
+#include "curl_tftp.h"
+#include "curl_http.h"
+#include "curl_file.h"
+#include "curl_ldap.h"
+#include "curl_ssh.h"
+#include "curl_imap.h"
+#include "curl_url.h"
+#include "curl_connect.h"
+#include "curl_inet_ntop.h"
+#include "curl_ntlm.h"
+#include "curl_ntlm_wb.h"
+#include "curl_socks.h"
+#include "curl_rtmp.h"
+#include "curl_gopher.h"
+#include "curl_http_proxy.h"
+#include "curl_bundles.h"
+#include "curl_conncache.h"
+
+#define _MPRINTF_REPLACE /* use our functions only */
+#include <curl/mprintf.h>
+
+#include "curl_memory.h"
+/* The last #include file should be: */
+#include "curl_memdebug.h"
+
+/* Local static prototypes */
+static bool ConnectionKillOne(struct SessionHandle *data);
+static void conn_free(struct connectdata *conn);
+static void signalPipeClose(struct curl_llist *pipeline, bool pipe_broke);
+static CURLcode do_init(struct connectdata *conn);
+static CURLcode parse_url_userpass(struct SessionHandle *data,
+ struct connectdata *conn,
+ char *user, char *passwd);
+/*
+ * Protocol table.
+ */
+
+static const struct Curl_handler * const protocols[] = {
+
+#ifndef CURL_DISABLE_HTTP
+ &Curl_handler_http,
+#endif
+
+#if defined(USE_SSL) && !defined(CURL_DISABLE_HTTP)
+ &Curl_handler_https,
+#endif
+
+#ifndef CURL_DISABLE_FTP
+ &Curl_handler_ftp,
+#endif
+
+#if defined(USE_SSL) && !defined(CURL_DISABLE_FTP)
+ &Curl_handler_ftps,
+#endif
+
+#ifndef CURL_DISABLE_TELNET
+ &Curl_handler_telnet,
+#endif
+
+#ifndef CURL_DISABLE_DICT
+ &Curl_handler_dict,
+#endif
+
+#ifndef CURL_DISABLE_LDAP
+ &Curl_handler_ldap,
+#if !defined(CURL_DISABLE_LDAPS) && \
+ ((defined(USE_OPENLDAP) && defined(USE_SSL)) || \
+ (!defined(USE_OPENLDAP) && defined(HAVE_LDAP_SSL)))
+ &Curl_handler_ldaps,
+#endif
+#endif
+
+#ifndef CURL_DISABLE_FILE
+ &Curl_handler_file,
+#endif
+
+#ifndef CURL_DISABLE_TFTP
+ &Curl_handler_tftp,
+#endif
+
+#ifdef USE_LIBSSH2
+ &Curl_handler_scp,
+ &Curl_handler_sftp,
+#endif
+
+#ifndef CURL_DISABLE_IMAP
+ &Curl_handler_imap,
+#ifdef USE_SSL
+ &Curl_handler_imaps,
+#endif
+#endif
+
+#ifndef CURL_DISABLE_POP3
+ &Curl_handler_pop3,
+#ifdef USE_SSL
+ &Curl_handler_pop3s,
+#endif
+#endif
+
+#ifndef CURL_DISABLE_SMTP
+ &Curl_handler_smtp,
+#ifdef USE_SSL
+ &Curl_handler_smtps,
+#endif
+#endif
+
+#ifndef CURL_DISABLE_RTSP
+ &Curl_handler_rtsp,
+#endif
+
+#ifndef CURL_DISABLE_GOPHER
+ &Curl_handler_gopher,
+#endif
+
+#ifdef USE_LIBRTMP
+ &Curl_handler_rtmp,
+ &Curl_handler_rtmpt,
+ &Curl_handler_rtmpe,
+ &Curl_handler_rtmpte,
+ &Curl_handler_rtmps,
+ &Curl_handler_rtmpts,
+#endif
+
+ (struct Curl_handler *) NULL
+};
+
+/*
+ * Dummy handler for undefined protocol schemes.
+ */
+
+static const struct Curl_handler Curl_handler_dummy = {
+ "<no protocol>", /* scheme */
+ ZERO_NULL, /* setup_connection */
+ ZERO_NULL, /* do_it */
+ ZERO_NULL, /* done */
+ ZERO_NULL, /* do_more */
+ ZERO_NULL, /* connect_it */
+ ZERO_NULL, /* connecting */
+ ZERO_NULL, /* doing */
+ ZERO_NULL, /* proto_getsock */
+ ZERO_NULL, /* doing_getsock */
+ ZERO_NULL, /* domore_getsock */
+ ZERO_NULL, /* perform_getsock */
+ ZERO_NULL, /* disconnect */
+ ZERO_NULL, /* readwrite */
+ 0, /* defport */
+ 0, /* protocol */
+ PROTOPT_NONE /* flags */
+};
+
+static void close_connections(struct SessionHandle *data)
+{
+ /* Loop through all open connections and kill them one by one */
+ bool killed;
+ do {
+ killed = ConnectionKillOne(data);
+ } while(killed);
+}
+
+void Curl_freeset(struct SessionHandle * data)
+{
+ /* Free all dynamic strings stored in the data->set substructure. */
+ enum dupstring i;
+ for(i=(enum dupstring)0; i < STRING_LAST; i++)
+ Curl_safefree(data->set.str[i]);
+
+ if(data->change.referer_alloc) {
+ Curl_safefree(data->change.referer);
+ data->change.referer_alloc = FALSE;
+ }
+ data->change.referer = NULL;
+}
+
+static CURLcode setstropt(char **charp, char * s)
+{
+ /* Release the previous storage at `charp' and replace by a dynamic storage
+ copy of `s'. Return CURLE_OK or CURLE_OUT_OF_MEMORY. */
+
+ Curl_safefree(*charp);
+
+ if(s) {
+ s = strdup(s);
+
+ if(!s)
+ return CURLE_OUT_OF_MEMORY;
+
+ *charp = s;
+ }
+
+ return CURLE_OK;
+}
+
+static CURLcode setstropt_userpwd(char *option, char **user_storage,
+ char **pwd_storage)
+{
+ char* separator;
+ CURLcode result = CURLE_OK;
+
+ if(!option) {
+ /* we treat a NULL passed in as a hint to clear existing info */
+ Curl_safefree(*user_storage);
+ *user_storage = (char *) NULL;
+ Curl_safefree(*pwd_storage);
+ *pwd_storage = (char *) NULL;
+ return CURLE_OK;
+ }
+
+ separator = strchr(option, ':');
+ if(separator != NULL) {
+
+ /* store username part of option */
+ char * p;
+ size_t username_len = (size_t)(separator-option);
+ p = malloc(username_len+1);
+ if(!p)
+ result = CURLE_OUT_OF_MEMORY;
+ else {
+ memcpy(p, option, username_len);
+ p[username_len] = '\0';
+ Curl_safefree(*user_storage);
+ *user_storage = p;
+ }
+
+ /* store password part of option */
+ if(result == CURLE_OK)
+ result = setstropt(pwd_storage, separator+1);
+ }
+ else {
+ result = setstropt(user_storage, option);
+ }
+ return result;
+}
+
+CURLcode Curl_dupset(struct SessionHandle * dst, struct SessionHandle * src)
+{
+ CURLcode r = CURLE_OK;
+ enum dupstring i;
+
+ /* Copy src->set into dst->set first, then deal with the strings
+ afterwards */
+ dst->set = src->set;
+
+ /* clear all string pointers first */
+ memset(dst->set.str, 0, STRING_LAST * sizeof(char *));
+
+ /* duplicate all strings */
+ for(i=(enum dupstring)0; i< STRING_LAST; i++) {
+ r = setstropt(&dst->set.str[i], src->set.str[i]);
+ if(r != CURLE_OK)
+ break;
+ }
+
+ /* If a failure occurred, freeing has to be performed externally. */
+ return r;
+}
+
+/*
+ * This is the internal function curl_easy_cleanup() calls. This should
+ * cleanup and free all resources associated with this sessionhandle.
+ *
+ * NOTE: if we ever add something that attempts to write to a socket or
+ * similar here, we must ignore SIGPIPE first. It is currently only done
+ * when curl_easy_perform() is invoked.
+ */
+
+CURLcode Curl_close(struct SessionHandle *data)
+{
+ struct Curl_multi *m;
+
+ if(!data)
+ return CURLE_OK;
+
+ Curl_expire(data, 0); /* shut off timers */
+
+ m = data->multi;
+
+ if(m)
+ /* This handle is still part of a multi handle, take care of this first
+ and detach this handle from there. */
+ curl_multi_remove_handle(data->multi, data);
+
+ /* Destroy the timeout list that is held in the easy handle. It is
+ /normally/ done by curl_multi_remove_handle() but this is "just in
+ case" */
+ if(data->state.timeoutlist) {
+ Curl_llist_destroy(data->state.timeoutlist, NULL);
+ data->state.timeoutlist = NULL;
+ }
+
+ data->magic = 0; /* force a clear AFTER the possibly enforced removal from
+ the multi handle, since that function uses the magic
+ field! */
+
+ if(data->state.conn_cache) {
+ if(data->state.conn_cache->type == CONNCACHE_PRIVATE) {
+ /* close all connections still alive that are in the private connection
+ cache, as we no longer have the pointer left to the shared one. */
+ close_connections(data);
+ Curl_conncache_destroy(data->state.conn_cache);
+ data->state.conn_cache = NULL;
+ }
+ }
+
+ if(data->dns.hostcachetype == HCACHE_PRIVATE)
+ Curl_hostcache_destroy(data);
+
+ if(data->state.rangestringalloc)
+ free(data->state.range);
+
+ /* Free the pathbuffer */
+ Curl_safefree(data->state.pathbuffer);
+ data->state.path = NULL;
+
+ Curl_safefree(data->state.proto.generic);
+
+ /* Close down all open SSL info and sessions */
+ Curl_ssl_close_all(data);
+ Curl_safefree(data->state.first_host);
+ Curl_safefree(data->state.scratch);
+ Curl_ssl_free_certinfo(data);
+
+ if(data->change.referer_alloc) {
+ Curl_safefree(data->change.referer);
+ data->change.referer_alloc = FALSE;
+ }
+ data->change.referer = NULL;
+
+ if(data->change.url_alloc) {
+ Curl_safefree(data->change.url);
+ data->change.url_alloc = FALSE;
+ }
+ data->change.url = NULL;
+
+ Curl_safefree(data->state.headerbuff);
+
+ Curl_flush_cookies(data, 1);
+
+ Curl_digest_cleanup(data);
+
+ Curl_safefree(data->info.contenttype);
+ Curl_safefree(data->info.wouldredirect);
+
+ /* this destroys the channel and we cannot use it anymore after this */
+ Curl_resolver_cleanup(data->state.resolver);
+
+ Curl_convert_close(data);
+
+ /* No longer a dirty share, if it exists */
+ if(data->share) {
+ Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
+ data->share->dirty--;
+ Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
+ }
+
+ Curl_freeset(data);
+ free(data);
+ return CURLE_OK;
+}
+
+/*
+ * Initialize the UserDefined fields within a SessionHandle.
+ * This may be safely called on a new or existing SessionHandle.
+ */
+CURLcode Curl_init_userdefined(struct UserDefined *set)
+{
+ CURLcode res = CURLE_OK;
+
+ set->out = stdout; /* default output to stdout */
+ set->in = stdin; /* default input from stdin */
+ set->err = stderr; /* default stderr to stderr */
+
+ /* use fwrite as default function to store output */
+ set->fwrite_func = (curl_write_callback)fwrite;
+
+ /* use fread as default function to read input */
+ set->fread_func = (curl_read_callback)fread;
+ set->is_fread_set = 0;
+ set->is_fwrite_set = 0;
+
+ set->seek_func = ZERO_NULL;
+ set->seek_client = ZERO_NULL;
+
+ /* conversion callbacks for non-ASCII hosts */
+ set->convfromnetwork = ZERO_NULL;
+ set->convtonetwork = ZERO_NULL;
+ set->convfromutf8 = ZERO_NULL;
+
+ set->infilesize = -1; /* we don't know any size */
+ set->postfieldsize = -1; /* unknown size */
+ set->maxredirs = -1; /* allow any amount by default */
+
+ set->httpreq = HTTPREQ_GET; /* Default HTTP request */
+ set->rtspreq = RTSPREQ_OPTIONS; /* Default RTSP request */
+ set->ftp_use_epsv = TRUE; /* FTP defaults to EPSV operations */
+ set->ftp_use_eprt = TRUE; /* FTP defaults to EPRT operations */
+ set->ftp_use_pret = FALSE; /* mainly useful for drftpd servers */
+ set->ftp_filemethod = FTPFILE_MULTICWD;
+
+ set->dns_cache_timeout = 60; /* Timeout every 60 seconds by default */
+
+ /* Set the default size of the SSL session ID cache */
+ set->ssl.max_ssl_sessions = 5;
+
+ set->proxyport = CURL_DEFAULT_PROXY_PORT; /* from curl_url.h */
+ set->proxytype = CURLPROXY_HTTP; /* defaults to HTTP proxy */
+ set->httpauth = CURLAUTH_BASIC; /* defaults to basic */
+ set->proxyauth = CURLAUTH_BASIC; /* defaults to basic */
+
+ /* make libcurl quiet by default: */
+ set->hide_progress = TRUE; /* CURLOPT_NOPROGRESS changes these */
+
+ /*
+ * libcurl 7.10 introduced SSL verification *by default*! This needs to be
+ * switched off unless wanted.
+ */
+ set->ssl.verifypeer = TRUE;
+ set->ssl.verifyhost = TRUE;
+#ifdef USE_TLS_SRP
+ set->ssl.authtype = CURL_TLSAUTH_NONE;
+#endif
+ set->ssh_auth_types = CURLSSH_AUTH_DEFAULT; /* defaults to any auth
+ type */
+ set->ssl.sessionid = TRUE; /* session ID caching enabled by default */
+
+ set->new_file_perms = 0644; /* Default permissions */
+ set->new_directory_perms = 0755; /* Default permissions */
+
+ /* for the *protocols fields we don't use the CURLPROTO_ALL convenience
+ define since we internally only use the lower 16 bits for the passed
+ in bitmask to not conflict with the private bits */
+ set->allowed_protocols = CURLPROTO_ALL;
+ set->redir_protocols =
+ CURLPROTO_ALL & ~(CURLPROTO_FILE|CURLPROTO_SCP); /* not FILE or SCP */
+
+#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI)
+ /*
+ * disallow unprotected protection negotiation NEC reference implementation
+ * seem not to follow rfc1961 section 4.3/4.4
+ */
+ set->socks5_gssapi_nec = FALSE;
+ /* set default gssapi service name */
+ res = setstropt(&set->str[STRING_SOCKS5_GSSAPI_SERVICE],
+ (char *) CURL_DEFAULT_SOCKS5_GSSAPI_SERVICE);
+ if(res != CURLE_OK)
+ return res;
+#endif
+
+ /* This is our preferred CA cert bundle/path since install time */
+#if defined(CURL_CA_BUNDLE)
+ res = setstropt(&set->str[STRING_SSL_CAFILE], (char *) CURL_CA_BUNDLE);
+#elif defined(CURL_CA_PATH)
+ res = setstropt(&set->str[STRING_SSL_CAPATH], (char *) CURL_CA_PATH);
+#endif
+
+ set->wildcardmatch = FALSE;
+ set->chunk_bgn = ZERO_NULL;
+ set->chunk_end = ZERO_NULL;
+
+ /* tcp keepalives are disabled by default, but provide reasonable values for
+ * the interval and idle times.
+ */
+ set->tcp_keepalive = FALSE;
+ set->tcp_keepintvl = 60;
+ set->tcp_keepidle = 60;
+
+ return res;
+}
+
+/**
+ * Curl_open()
+ *
+ * @param curl is a pointer to a sessionhandle pointer that gets set by this
+ * function.
+ * @return CURLcode
+ */
+
+CURLcode Curl_open(struct SessionHandle **curl)
+{
+ CURLcode res = CURLE_OK;
+ struct SessionHandle *data;
+ CURLcode status;
+
+ /* Very simple start-up: alloc the struct, init it with zeroes and return */
+ data = calloc(1, sizeof(struct SessionHandle));
+ if(!data) {
+ /* this is a very serious error */
+ DEBUGF(fprintf(stderr, "Error: calloc of SessionHandle failed\n"));
+ return CURLE_OUT_OF_MEMORY;
+ }
+
+ data->magic = CURLEASY_MAGIC_NUMBER;
+
+ status = Curl_resolver_init(&data->state.resolver);
+ if(status) {
+ DEBUGF(fprintf(stderr, "Error: resolver_init failed\n"));
+ free(data);
+ return status;
+ }
+
+ /* We do some initial setup here, all those fields that can't be just 0 */
+
+ data->state.headerbuff = malloc(HEADERSIZE);
+ if(!data->state.headerbuff) {
+ DEBUGF(fprintf(stderr, "Error: malloc of headerbuff failed\n"));
+ res = CURLE_OUT_OF_MEMORY;
+ }
+ else {
+ Curl_easy_initHandleData(data);
+ res = Curl_init_userdefined(&data->set);
+
+ data->state.headersize=HEADERSIZE;
+
+ Curl_convert_init(data);
+
+ /* most recent connection is not yet defined */
+ data->state.lastconnect = NULL;
+
+ data->progress.flags |= PGRS_HIDE;
+ data->state.current_speed = -1; /* init to negative == impossible */
+
+ data->wildcard.state = CURLWC_INIT;
+ data->wildcard.filelist = NULL;
+ data->set.fnmatch = ZERO_NULL;
+ /* This no longer creates a connection cache here. It is instead made on
+ the first call to curl_easy_perform() or when the handle is added to a
+ multi stack. */
+ }
+
+
+ if(res) {
+ Curl_resolver_cleanup(data->state.resolver);
+ if(data->state.headerbuff)
+ free(data->state.headerbuff);
+ Curl_freeset(data);
+ free(data);
+ data = NULL;
+ }
+ else
+ *curl = data;
+
+ return res;
+}
+
+CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option,
+ va_list param)
+{
+ char *argptr;
+ CURLcode result = CURLE_OK;
+ long arg;
+#ifndef CURL_DISABLE_HTTP
+ curl_off_t bigsize;
+#endif
+
+ switch(option) {
+ case CURLOPT_DNS_CACHE_TIMEOUT:
+ data->set.dns_cache_timeout = va_arg(param, long);
+ break;
+ case CURLOPT_DNS_USE_GLOBAL_CACHE:
+ /* remember we want this enabled */
+ arg = va_arg(param, long);
+ data->set.global_dns_cache = (0 != arg)?TRUE:FALSE;
+ break;
+ case CURLOPT_SSL_CIPHER_LIST:
+ /* set a list of cipher we want to use in the SSL connection */
+ result = setstropt(&data->set.str[STRING_SSL_CIPHER_LIST],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_RANDOM_FILE:
+ /*
+ * This is the path name to a file that contains random data to seed
+ * the random SSL stuff with. The file is only used for reading.
+ */
+ result = setstropt(&data->set.str[STRING_SSL_RANDOM_FILE],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_EGDSOCKET:
+ /*
+ * The Entropy Gathering Daemon socket pathname
+ */
+ result = setstropt(&data->set.str[STRING_SSL_EGDSOCKET],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_MAXCONNECTS:
+ /*
+ * Set the absolute number of maximum simultaneous alive connection that
+ * libcurl is allowed to have.
+ */
+ data->set.maxconnects = va_arg(param, long);
+ break;
+ case CURLOPT_FORBID_REUSE:
+ /*
+ * When this transfer is done, it must not be left to be reused by a
+ * subsequent transfer but shall be closed immediately.
+ */
+ data->set.reuse_forbid = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_FRESH_CONNECT:
+ /*
+ * This transfer shall not use a previously cached connection but
+ * should be made with a fresh new connect!
+ */
+ data->set.reuse_fresh = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_VERBOSE:
+ /*
+ * Verbose means infof() calls that give a lot of information about
+ * the connection and transfer procedures as well as internal choices.
+ */
+ data->set.verbose = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_HEADER:
+ /*
+ * Set to include the header in the general data output stream.
+ */
+ data->set.include_header = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_NOPROGRESS:
+ /*
+ * Shut off the internal supported progress meter
+ */
+ data->set.hide_progress = (0 != va_arg(param, long))?TRUE:FALSE;
+ if(data->set.hide_progress)
+ data->progress.flags |= PGRS_HIDE;
+ else
+ data->progress.flags &= ~PGRS_HIDE;
+ break;
+ case CURLOPT_NOBODY:
+ /*
+ * Do not include the body part in the output data stream.
+ */
+ data->set.opt_no_body = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_FAILONERROR:
+ /*
+ * Don't output the >=300 error code HTML-page, but instead only
+ * return error.
+ */
+ data->set.http_fail_on_error = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_UPLOAD:
+ case CURLOPT_PUT:
+ /*
+ * We want to sent data to the remote host. If this is HTTP, that equals
+ * using the PUT request.
+ */
+ data->set.upload = (0 != va_arg(param, long))?TRUE:FALSE;
+ if(data->set.upload) {
+ /* If this is HTTP, PUT is what's needed to "upload" */
+ data->set.httpreq = HTTPREQ_PUT;
+ data->set.opt_no_body = FALSE; /* this is implied */
+ }
+ else
+ /* In HTTP, the opposite of upload is GET (unless NOBODY is true as
+ then this can be changed to HEAD later on) */
+ data->set.httpreq = HTTPREQ_GET;
+ break;
+ case CURLOPT_FILETIME:
+ /*
+ * Try to get the file time of the remote document. The time will
+ * later (possibly) become available using curl_easy_getinfo().
+ */
+ data->set.get_filetime = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_FTP_CREATE_MISSING_DIRS:
+ /*
+ * An FTP option that modifies an upload to create missing directories on
+ * the server.
+ */
+ switch(va_arg(param, long)) {
+ case 0:
+ data->set.ftp_create_missing_dirs = 0;
+ break;
+ case 1:
+ data->set.ftp_create_missing_dirs = 1;
+ break;
+ case 2:
+ data->set.ftp_create_missing_dirs = 2;
+ break;
+ default:
+ /* reserve other values for future use */
+ result = CURLE_UNKNOWN_OPTION;
+ break;
+ }
+ break;
+ case CURLOPT_SERVER_RESPONSE_TIMEOUT:
+ /*
+ * Option that specifies how quickly an server response must be obtained
+ * before it is considered failure. For pingpong protocols.
+ */
+ data->set.server_response_timeout = va_arg( param , long ) * 1000;
+ break;
+ case CURLOPT_TFTP_BLKSIZE:
+ /*
+ * TFTP option that specifies the block size to use for data transmission
+ */
+ data->set.tftp_blksize = va_arg(param, long);
+ break;
+ case CURLOPT_DIRLISTONLY:
+ /*
+ * An option that changes the command to one that asks for a list
+ * only, no file info details.
+ */
+ data->set.ftp_list_only = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_APPEND:
+ /*
+ * We want to upload and append to an existing file.
+ */
+ data->set.ftp_append = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_FTP_FILEMETHOD:
+ /*
+ * How do access files over FTP.
+ */
+ data->set.ftp_filemethod = (curl_ftpfile)va_arg(param, long);
+ break;
+ case CURLOPT_NETRC:
+ /*
+ * Parse the $HOME/.netrc file
+ */
+ data->set.use_netrc = (enum CURL_NETRC_OPTION)va_arg(param, long);
+ break;
+ case CURLOPT_NETRC_FILE:
+ /*
+ * Use this file instead of the $HOME/.netrc file
+ */
+ result = setstropt(&data->set.str[STRING_NETRC_FILE],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_TRANSFERTEXT:
+ /*
+ * This option was previously named 'FTPASCII'. Renamed to work with
+ * more protocols than merely FTP.
+ *
+ * Transfer using ASCII (instead of BINARY).
+ */
+ data->set.prefer_ascii = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_TIMECONDITION:
+ /*
+ * Set HTTP time condition. This must be one of the defines in the
+ * curl/curl.h header file.
+ */
+ data->set.timecondition = (curl_TimeCond)va_arg(param, long);
+ break;
+ case CURLOPT_TIMEVALUE:
+ /*
+ * This is the value to compare with the remote document with the
+ * method set with CURLOPT_TIMECONDITION
+ */
+ data->set.timevalue = (time_t)va_arg(param, long);
+ break;
+ case CURLOPT_SSLVERSION:
+ /*
+ * Set explicit SSL version to try to connect with, as some SSL
+ * implementations are lame.
+ */
+ data->set.ssl.version = va_arg(param, long);
+ break;
+
+#ifndef CURL_DISABLE_HTTP
+ case CURLOPT_AUTOREFERER:
+ /*
+ * Switch on automatic referer that gets set if curl follows locations.
+ */
+ data->set.http_auto_referer = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_ACCEPT_ENCODING:
+ /*
+ * String to use at the value of Accept-Encoding header.
+ *
+ * If the encoding is set to "" we use an Accept-Encoding header that
+ * encompasses all the encodings we support.
+ * If the encoding is set to NULL we don't send an Accept-Encoding header
+ * and ignore an received Content-Encoding header.
+ *
+ */
+ argptr = va_arg(param, char *);
+ result = setstropt(&data->set.str[STRING_ENCODING],
+ (argptr && !*argptr)?
+ (char *) ALL_CONTENT_ENCODINGS: argptr);
+ break;
+
+ case CURLOPT_TRANSFER_ENCODING:
+ data->set.http_transfer_encoding = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_FOLLOWLOCATION:
+ /*
+ * Follow Location: header hints on a HTTP-server.
+ */
+ data->set.http_follow_location = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_UNRESTRICTED_AUTH:
+ /*
+ * Send authentication (user+password) when following locations, even when
+ * hostname changed.
+ */
+ data->set.http_disable_hostname_check_before_authentication =
+ (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_MAXREDIRS:
+ /*
+ * The maximum amount of hops you allow curl to follow Location:
+ * headers. This should mostly be used to detect never-ending loops.
+ */
+ data->set.maxredirs = va_arg(param, long);
+ break;
+
+ case CURLOPT_POSTREDIR:
+ {
+ /*
+ * Set the behaviour of POST when redirecting
+ * CURL_REDIR_GET_ALL - POST is changed to GET after 301 and 302
+ * CURL_REDIR_POST_301 - POST is kept as POST after 301
+ * CURL_REDIR_POST_302 - POST is kept as POST after 302
+ * CURL_REDIR_POST_303 - POST is kept as POST after 303
+ * CURL_REDIR_POST_ALL - POST is kept as POST after 301, 302 and 303
+ * other - POST is kept as POST after 301 and 302
+ */
+ int postRedir = curlx_sltosi(va_arg(param, long));
+ data->set.keep_post = postRedir & CURL_REDIR_POST_ALL;
+ }
+ break;
+
+ case CURLOPT_POST:
+ /* Does this option serve a purpose anymore? Yes it does, when
+ CURLOPT_POSTFIELDS isn't used and the POST data is read off the
+ callback! */
+ if(va_arg(param, long)) {
+ data->set.httpreq = HTTPREQ_POST;
+ data->set.opt_no_body = FALSE; /* this is implied */
+ }
+ else
+ data->set.httpreq = HTTPREQ_GET;
+ break;
+
+ case CURLOPT_COPYPOSTFIELDS:
+ /*
+ * A string with POST data. Makes curl HTTP POST. Even if it is NULL.
+ * If needed, CURLOPT_POSTFIELDSIZE must have been set prior to
+ * CURLOPT_COPYPOSTFIELDS and not altered later.
+ */
+ argptr = va_arg(param, char *);
+
+ if(!argptr || data->set.postfieldsize == -1)
+ result = setstropt(&data->set.str[STRING_COPYPOSTFIELDS], argptr);
+ else {
+ /*
+ * Check that requested length does not overflow the size_t type.
+ */
+
+ if((data->set.postfieldsize < 0) ||
+ ((sizeof(curl_off_t) != sizeof(size_t)) &&
+ (data->set.postfieldsize > (curl_off_t)((size_t)-1))))
+ result = CURLE_OUT_OF_MEMORY;
+ else {
+ char * p;
+
+ (void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
+
+ /* Allocate even when size == 0. This satisfies the need of possible
+ later address compare to detect the COPYPOSTFIELDS mode, and
+ to mark that postfields is used rather than read function or
+ form data.
+ */
+ p = malloc((size_t)(data->set.postfieldsize?
+ data->set.postfieldsize:1));
+
+ if(!p)
+ result = CURLE_OUT_OF_MEMORY;
+ else {
+ if(data->set.postfieldsize)
+ memcpy(p, argptr, (size_t)data->set.postfieldsize);
+
+ data->set.str[STRING_COPYPOSTFIELDS] = p;
+ }
+ }
+ }
+
+ data->set.postfields = data->set.str[STRING_COPYPOSTFIELDS];
+ data->set.httpreq = HTTPREQ_POST;
+ break;
+
+ case CURLOPT_POSTFIELDS:
+ /*
+ * Like above, but use static data instead of copying it.
+ */
+ data->set.postfields = va_arg(param, void *);
+ /* Release old copied data. */
+ (void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
+ data->set.httpreq = HTTPREQ_POST;
+ break;
+
+ case CURLOPT_POSTFIELDSIZE:
+ /*
+ * The size of the POSTFIELD data to prevent libcurl to do strlen() to
+ * figure it out. Enables binary posts.
+ */
+ bigsize = va_arg(param, long);
+
+ if(data->set.postfieldsize < bigsize &&
+ data->set.postfields == data->set.str[STRING_COPYPOSTFIELDS]) {
+ /* Previous CURLOPT_COPYPOSTFIELDS is no longer valid. */
+ (void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
+ data->set.postfields = NULL;
+ }
+
+ data->set.postfieldsize = bigsize;
+ break;
+
+ case CURLOPT_POSTFIELDSIZE_LARGE:
+ /*
+ * The size of the POSTFIELD data to prevent libcurl to do strlen() to
+ * figure it out. Enables binary posts.
+ */
+ bigsize = va_arg(param, curl_off_t);
+
+ if(data->set.postfieldsize < bigsize &&
+ data->set.postfields == data->set.str[STRING_COPYPOSTFIELDS]) {
+ /* Previous CURLOPT_COPYPOSTFIELDS is no longer valid. */
+ (void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
+ data->set.postfields = NULL;
+ }
+
+ data->set.postfieldsize = bigsize;
+ break;
+
+ case CURLOPT_HTTPPOST:
+ /*
+ * Set to make us do HTTP POST
+ */
+ data->set.httppost = va_arg(param, struct curl_httppost *);
+ data->set.httpreq = HTTPREQ_POST_FORM;
+ data->set.opt_no_body = FALSE; /* this is implied */
+ break;
+
+ case CURLOPT_REFERER:
+ /*
+ * String to set in the HTTP Referer: field.
+ */
+ if(data->change.referer_alloc) {
+ Curl_safefree(data->change.referer);
+ data->change.referer_alloc = FALSE;
+ }
+ result = setstropt(&data->set.str[STRING_SET_REFERER],
+ va_arg(param, char *));
+ data->change.referer = data->set.str[STRING_SET_REFERER];
+ break;
+
+ case CURLOPT_USERAGENT:
+ /*
+ * String to use in the HTTP User-Agent field
+ */
+ result = setstropt(&data->set.str[STRING_USERAGENT],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_HTTPHEADER:
+ /*
+ * Set a list with HTTP headers to use (or replace internals with)
+ */
+ data->set.headers = va_arg(param, struct curl_slist *);
+ break;
+
+ case CURLOPT_HTTP200ALIASES:
+ /*
+ * Set a list of aliases for HTTP 200 in response header
+ */
+ data->set.http200aliases = va_arg(param, struct curl_slist *);
+ break;
+
+#if !defined(CURL_DISABLE_COOKIES)
+ case CURLOPT_COOKIE:
+ /*
+ * Cookie string to send to the remote server in the request.
+ */
+ result = setstropt(&data->set.str[STRING_COOKIE],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_COOKIEFILE:
+ /*
+ * Set cookie file to read and parse. Can be used multiple times.
+ */
+ argptr = (char *)va_arg(param, void *);
+ if(argptr) {
+ struct curl_slist *cl;
+ /* append the cookie file name to the list of file names, and deal with
+ them later */
+ cl = curl_slist_append(data->change.cookielist, argptr);
+ if(!cl) {
+ curl_slist_free_all(data->change.cookielist);
+ data->change.cookielist = NULL;
+ return CURLE_OUT_OF_MEMORY;
+ }
+ data->change.cookielist = cl; /* store the list for later use */
+ }
+ break;
+
+ case CURLOPT_COOKIEJAR:
+ /*
+ * Set cookie file name to dump all cookies to when we're done.
+ */
+ result = setstropt(&data->set.str[STRING_COOKIEJAR],
+ va_arg(param, char *));
+
+ /*
+ * Activate the cookie parser. This may or may not already
+ * have been made.
+ */
+ data->cookies = Curl_cookie_init(data, NULL, data->cookies,
+ data->set.cookiesession);
+ break;
+
+ case CURLOPT_COOKIESESSION:
+ /*
+ * Set this option to TRUE to start a new "cookie session". It will
+ * prevent the forthcoming read-cookies-from-file actions to accept
+ * cookies that are marked as being session cookies, as they belong to a
+ * previous session.
+ *
+ * In the original Netscape cookie spec, "session cookies" are cookies
+ * with no expire date set. RFC2109 describes the same action if no
+ * 'Max-Age' is set and RFC2965 includes the RFC2109 description and adds
+ * a 'Discard' action that can enforce the discard even for cookies that
+ * have a Max-Age.
+ *
+ * We run mostly with the original cookie spec, as hardly anyone implements
+ * anything else.
+ */
+ data->set.cookiesession = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_COOKIELIST:
+ argptr = va_arg(param, char *);
+
+ if(argptr == NULL)
+ break;
+
+ if(Curl_raw_equal(argptr, "ALL")) {
+ /* clear all cookies */
+ Curl_cookie_clearall(data->cookies);
+ break;
+ }
+ else if(Curl_raw_equal(argptr, "SESS")) {
+ /* clear session cookies */
+ Curl_cookie_clearsess(data->cookies);
+ break;
+ }
+ else if(Curl_raw_equal(argptr, "FLUSH")) {
+ /* flush cookies to file */
+ Curl_flush_cookies(data, 0);
+ break;
+ }
+
+ if(!data->cookies)
+ /* if cookie engine was not running, activate it */
+ data->cookies = Curl_cookie_init(data, NULL, NULL, TRUE);
+
+ argptr = strdup(argptr);
+ if(!argptr) {
+ result = CURLE_OUT_OF_MEMORY;
+ break;
+ }
+
+ if(checkprefix("Set-Cookie:", argptr))
+ /* HTTP Header format line */
+ Curl_cookie_add(data, data->cookies, TRUE, argptr + 11, NULL, NULL);
+
+ else
+ /* Netscape format line */
+ Curl_cookie_add(data, data->cookies, FALSE, argptr, NULL, NULL);
+
+ free(argptr);
+ break;
+#endif /* CURL_DISABLE_COOKIES */
+
+ case CURLOPT_HTTPGET:
+ /*
+ * Set to force us do HTTP GET
+ */
+ if(va_arg(param, long)) {
+ data->set.httpreq = HTTPREQ_GET;
+ data->set.upload = FALSE; /* switch off upload */
+ data->set.opt_no_body = FALSE; /* this is implied */
+ }
+ break;
+
+ case CURLOPT_HTTP_VERSION:
+ /*
+ * This sets a requested HTTP version to be used. The value is one of
+ * the listed enums in curl/curl.h.
+ */
+ data->set.httpversion = va_arg(param, long);
+ break;
+
+ case CURLOPT_HTTPAUTH:
+ /*
+ * Set HTTP Authentication type BITMASK.
+ */
+ {
+ int bitcheck;
+ bool authbits;
+ unsigned long auth = va_arg(param, unsigned long);
+
+ if(auth == CURLAUTH_NONE) {
+ data->set.httpauth = auth;
+ break;
+ }
+
+ /* the DIGEST_IE bit is only used to set a special marker, for all the
+ rest we need to handle it as normal DIGEST */
+ data->state.authhost.iestyle = (auth & CURLAUTH_DIGEST_IE)?TRUE:FALSE;
+
+ if(auth & CURLAUTH_DIGEST_IE) {
+ auth |= CURLAUTH_DIGEST; /* set standard digest bit */
+ auth &= ~CURLAUTH_DIGEST_IE; /* unset ie digest bit */
+ }
+
+ /* switch off bits we can't support */
+#ifndef USE_NTLM
+ auth &= ~CURLAUTH_NTLM; /* no NTLM support */
+ auth &= ~CURLAUTH_NTLM_WB; /* no NTLM_WB support */
+#elif !defined(NTLM_WB_ENABLED)
+ auth &= ~CURLAUTH_NTLM_WB; /* no NTLM_WB support */
+#endif
+#ifndef USE_HTTP_NEGOTIATE
+ auth &= ~CURLAUTH_GSSNEGOTIATE; /* no GSS-Negotiate without GSSAPI or
+ WINDOWS_SSPI */
+#endif
+
+ /* check if any auth bit lower than CURLAUTH_ONLY is still set */
+ bitcheck = 0;
+ authbits = FALSE;
+ while(bitcheck < 31) {
+ if(auth & (1UL << bitcheck++)) {
+ authbits = TRUE;
+ break;
+ }
+ }
+ if(!authbits)
+ return CURLE_NOT_BUILT_IN; /* no supported types left! */
+
+ data->set.httpauth = auth;
+ }
+ break;
+
+#endif /* CURL_DISABLE_HTTP */
+
+ case CURLOPT_CUSTOMREQUEST:
+ /*
+ * Set a custom string to use as request
+ */
+ result = setstropt(&data->set.str[STRING_CUSTOMREQUEST],
+ va_arg(param, char *));
+
+ /* we don't set
+ data->set.httpreq = HTTPREQ_CUSTOM;
+ here, we continue as if we were using the already set type
+ and this just changes the actual request keyword */
+ break;
+
+#ifndef CURL_DISABLE_PROXY
+ case CURLOPT_HTTPPROXYTUNNEL:
+ /*
+ * Tunnel operations through the proxy instead of normal proxy use
+ */
+ data->set.tunnel_thru_httpproxy = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_PROXYPORT:
+ /*
+ * Explicitly set HTTP proxy port number.
+ */
+ data->set.proxyport = va_arg(param, long);
+ break;
+
+ case CURLOPT_PROXYAUTH:
+ /*
+ * Set HTTP Authentication type BITMASK.
+ */
+ {
+ int bitcheck;
+ bool authbits;
+ unsigned long auth = va_arg(param, unsigned long);
+
+ if(auth == CURLAUTH_NONE) {
+ data->set.proxyauth = auth;
+ break;
+ }
+
+ /* the DIGEST_IE bit is only used to set a special marker, for all the
+ rest we need to handle it as normal DIGEST */
+ data->state.authproxy.iestyle = (auth & CURLAUTH_DIGEST_IE)?TRUE:FALSE;
+
+ if(auth & CURLAUTH_DIGEST_IE) {
+ auth |= CURLAUTH_DIGEST; /* set standard digest bit */
+ auth &= ~CURLAUTH_DIGEST_IE; /* unset ie digest bit */
+ }
+ /* switch off bits we can't support */
+#ifndef USE_NTLM
+ auth &= ~CURLAUTH_NTLM; /* no NTLM support */
+ auth &= ~CURLAUTH_NTLM_WB; /* no NTLM_WB support */
+#elif !defined(NTLM_WB_ENABLED)
+ auth &= ~CURLAUTH_NTLM_WB; /* no NTLM_WB support */
+#endif
+#ifndef USE_HTTP_NEGOTIATE
+ auth &= ~CURLAUTH_GSSNEGOTIATE; /* no GSS-Negotiate without GSSAPI or
+ WINDOWS_SSPI */
+#endif
+
+ /* check if any auth bit lower than CURLAUTH_ONLY is still set */
+ bitcheck = 0;
+ authbits = FALSE;
+ while(bitcheck < 31) {
+ if(auth & (1UL << bitcheck++)) {
+ authbits = TRUE;
+ break;
+ }
+ }
+ if(!authbits)
+ return CURLE_NOT_BUILT_IN; /* no supported types left! */
+
+ data->set.proxyauth = auth;
+ }
+ break;
+
+ case CURLOPT_PROXY:
+ /*
+ * Set proxy server:port to use as HTTP proxy.
+ *
+ * If the proxy is set to "" we explicitly say that we don't want to use a
+ * proxy (even though there might be environment variables saying so).
+ *
+ * Setting it to NULL, means no proxy but allows the environment variables
+ * to decide for us.
+ */
+ result = setstropt(&data->set.str[STRING_PROXY],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_PROXYTYPE:
+ /*
+ * Set proxy type. HTTP/HTTP_1_0/SOCKS4/SOCKS4a/SOCKS5/SOCKS5_HOSTNAME
+ */
+ data->set.proxytype = (curl_proxytype)va_arg(param, long);
+ break;
+
+ case CURLOPT_PROXY_TRANSFER_MODE:
+ /*
+ * set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy
+ */
+ switch (va_arg(param, long)) {
+ case 0:
+ data->set.proxy_transfer_mode = FALSE;
+ break;
+ case 1:
+ data->set.proxy_transfer_mode = TRUE;
+ break;
+ default:
+ /* reserve other values for future use */
+ result = CURLE_UNKNOWN_OPTION;
+ break;
+ }
+ break;
+#endif /* CURL_DISABLE_PROXY */
+
+#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI)
+ case CURLOPT_SOCKS5_GSSAPI_SERVICE:
+ /*
+ * Set gssapi service name
+ */
+ result = setstropt(&data->set.str[STRING_SOCKS5_GSSAPI_SERVICE],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_SOCKS5_GSSAPI_NEC:
+ /*
+ * set flag for nec socks5 support
+ */
+ data->set.socks5_gssapi_nec = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+#endif
+
+ case CURLOPT_WRITEHEADER:
+ /*
+ * Custom pointer to pass the header write callback function
+ */
+ data->set.writeheader = (void *)va_arg(param, void *);
+ break;
+ case CURLOPT_ERRORBUFFER:
+ /*
+ * Error buffer provided by the caller to get the human readable
+ * error string in.
+ */
+ data->set.errorbuffer = va_arg(param, char *);
+ break;
+ case CURLOPT_FILE:
+ /*
+ * FILE pointer to write to or include in the data write callback
+ */
+ data->set.out = va_arg(param, FILE *);
+ break;
+ case CURLOPT_FTPPORT:
+ /*
+ * Use FTP PORT, this also specifies which IP address to use
+ */
+ result = setstropt(&data->set.str[STRING_FTPPORT],
+ va_arg(param, char *));
+ data->set.ftp_use_port = (NULL != data->set.str[STRING_FTPPORT]) ?
+ TRUE:FALSE;
+ break;
+
+ case CURLOPT_FTP_USE_EPRT:
+ data->set.ftp_use_eprt = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_FTP_USE_EPSV:
+ data->set.ftp_use_epsv = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_FTP_USE_PRET:
+ data->set.ftp_use_pret = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_FTP_SSL_CCC:
+ data->set.ftp_ccc = (curl_ftpccc)va_arg(param, long);
+ break;
+
+ case CURLOPT_FTP_SKIP_PASV_IP:
+ /*
+ * Enable or disable FTP_SKIP_PASV_IP, which will disable/enable the
+ * bypass of the IP address in PASV responses.
+ */
+ data->set.ftp_skip_ip = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_INFILE:
+ /*
+ * FILE pointer to read the file to be uploaded from. Or possibly
+ * used as argument to the read callback.
+ */
+ data->set.in = va_arg(param, FILE *);
+ break;
+ case CURLOPT_INFILESIZE:
+ /*
+ * If known, this should inform curl about the file size of the
+ * to-be-uploaded file.
+ */
+ data->set.infilesize = va_arg(param, long);
+ break;
+ case CURLOPT_INFILESIZE_LARGE:
+ /*
+ * If known, this should inform curl about the file size of the
+ * to-be-uploaded file.
+ */
+ data->set.infilesize = va_arg(param, curl_off_t);
+ break;
+ case CURLOPT_LOW_SPEED_LIMIT:
+ /*
+ * The low speed limit that if transfers are below this for
+ * CURLOPT_LOW_SPEED_TIME, the transfer is aborted.
+ */
+ data->set.low_speed_limit=va_arg(param, long);
+ break;
+ case CURLOPT_MAX_SEND_SPEED_LARGE:
+ /*
+ * When transfer uploads are faster then CURLOPT_MAX_SEND_SPEED_LARGE
+ * bytes per second the transfer is throttled..
+ */
+ data->set.max_send_speed=va_arg(param, curl_off_t);
+ break;
+ case CURLOPT_MAX_RECV_SPEED_LARGE:
+ /*
+ * When receiving data faster than CURLOPT_MAX_RECV_SPEED_LARGE bytes per
+ * second the transfer is throttled..
+ */
+ data->set.max_recv_speed=va_arg(param, curl_off_t);
+ break;
+ case CURLOPT_LOW_SPEED_TIME:
+ /*
+ * The low speed time that if transfers are below the set
+ * CURLOPT_LOW_SPEED_LIMIT during this time, the transfer is aborted.
+ */
+ data->set.low_speed_time=va_arg(param, long);
+ break;
+ case CURLOPT_URL:
+ /*
+ * The URL to fetch.
+ */
+ if(data->change.url_alloc) {
+ /* the already set URL is allocated, free it first! */
+ Curl_safefree(data->change.url);
+ data->change.url_alloc = FALSE;
+ }
+ result = setstropt(&data->set.str[STRING_SET_URL],
+ va_arg(param, char *));
+ data->change.url = data->set.str[STRING_SET_URL];
+ break;
+ case CURLOPT_PORT:
+ /*
+ * The port number to use when getting the URL
+ */
+ data->set.use_port = va_arg(param, long);
+ break;
+ case CURLOPT_TIMEOUT:
+ /*
+ * The maximum time you allow curl to use for a single transfer
+ * operation.
+ */
+ data->set.timeout = va_arg(param, long) * 1000L;
+ break;
+
+ case CURLOPT_TIMEOUT_MS:
+ data->set.timeout = va_arg(param, long);
+ break;
+
+ case CURLOPT_CONNECTTIMEOUT:
+ /*
+ * The maximum time you allow curl to use to connect.
+ */
+ data->set.connecttimeout = va_arg(param, long) * 1000L;
+ break;
+
+ case CURLOPT_CONNECTTIMEOUT_MS:
+ data->set.connecttimeout = va_arg(param, long);
+ break;
+
+ case CURLOPT_ACCEPTTIMEOUT_MS:
+ /*
+ * The maximum time you allow curl to wait for server connect
+ */
+ data->set.accepttimeout = va_arg(param, long);
+ break;
+
+ case CURLOPT_USERPWD:
+ /*
+ * user:password to use in the operation
+ */
+ result = setstropt_userpwd(va_arg(param, char *),
+ &data->set.str[STRING_USERNAME],
+ &data->set.str[STRING_PASSWORD]);
+ break;
+ case CURLOPT_USERNAME:
+ /*
+ * authentication user name to use in the operation
+ */
+ result = setstropt(&data->set.str[STRING_USERNAME],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_PASSWORD:
+ /*
+ * authentication password to use in the operation
+ */
+ result = setstropt(&data->set.str[STRING_PASSWORD],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_POSTQUOTE:
+ /*
+ * List of RAW FTP commands to use after a transfer
+ */
+ data->set.postquote = va_arg(param, struct curl_slist *);
+ break;
+ case CURLOPT_PREQUOTE:
+ /*
+ * List of RAW FTP commands to use prior to RETR (Wesley Laxton)
+ */
+ data->set.prequote = va_arg(param, struct curl_slist *);
+ break;
+ case CURLOPT_QUOTE:
+ /*
+ * List of RAW FTP commands to use before a transfer
+ */
+ data->set.quote = va_arg(param, struct curl_slist *);
+ break;
+ case CURLOPT_RESOLVE:
+ /*
+ * List of NAME:[address] names to populate the DNS cache with
+ * Prefix the NAME with dash (-) to _remove_ the name from the cache.
+ *
+ * Names added with this API will remain in the cache until explicitly
+ * removed or the handle is cleaned up.
+ *
+ * This API can remove any name from the DNS cache, but only entries
+ * that aren't actually in use right now will be pruned immediately.
+ */
+ data->set.resolve = va_arg(param, struct curl_slist *);
+ data->change.resolve = data->set.resolve;
+ break;
+ case CURLOPT_PROGRESSFUNCTION:
+ /*
+ * Progress callback function
+ */
+ data->set.fprogress = va_arg(param, curl_progress_callback);
+ if(data->set.fprogress)
+ data->progress.callback = TRUE; /* no longer internal */
+ else
+ data->progress.callback = FALSE; /* NULL enforces internal */
+
+ break;
+ case CURLOPT_PROGRESSDATA:
+ /*
+ * Custom client data to pass to the progress callback
+ */
+ data->set.progress_client = va_arg(param, void *);
+ break;
+
+#ifndef CURL_DISABLE_PROXY
+ case CURLOPT_PROXYUSERPWD:
+ /*
+ * user:password needed to use the proxy
+ */
+ result = setstropt_userpwd(va_arg(param, char *),
+ &data->set.str[STRING_PROXYUSERNAME],
+ &data->set.str[STRING_PROXYPASSWORD]);
+ break;
+ case CURLOPT_PROXYUSERNAME:
+ /*
+ * authentication user name to use in the operation
+ */
+ result = setstropt(&data->set.str[STRING_PROXYUSERNAME],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_PROXYPASSWORD:
+ /*
+ * authentication password to use in the operation
+ */
+ result = setstropt(&data->set.str[STRING_PROXYPASSWORD],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_NOPROXY:
+ /*
+ * proxy exception list
+ */
+ result = setstropt(&data->set.str[STRING_NOPROXY],
+ va_arg(param, char *));
+ break;
+#endif
+
+ case CURLOPT_RANGE:
+ /*
+ * What range of the file you want to transfer
+ */
+ result = setstropt(&data->set.str[STRING_SET_RANGE],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_RESUME_FROM:
+ /*
+ * Resume transfer at the give file position
+ */
+ data->set.set_resume_from = va_arg(param, long);
+ break;
+ case CURLOPT_RESUME_FROM_LARGE:
+ /*
+ * Resume transfer at the give file position
+ */
+ data->set.set_resume_from = va_arg(param, curl_off_t);
+ break;
+ case CURLOPT_DEBUGFUNCTION:
+ /*
+ * stderr write callback.
+ */
+ data->set.fdebug = va_arg(param, curl_debug_callback);
+ /*
+ * if the callback provided is NULL, it'll use the default callback
+ */
+ break;
+ case CURLOPT_DEBUGDATA:
+ /*
+ * Set to a void * that should receive all error writes. This
+ * defaults to CURLOPT_STDERR for normal operations.
+ */
+ data->set.debugdata = va_arg(param, void *);
+ break;
+ case CURLOPT_STDERR:
+ /*
+ * Set to a FILE * that should receive all error writes. This
+ * defaults to stderr for normal operations.
+ */
+ data->set.err = va_arg(param, FILE *);
+ if(!data->set.err)
+ data->set.err = stderr;
+ break;
+ case CURLOPT_HEADERFUNCTION:
+ /*
+ * Set header write callback
+ */
+ data->set.fwrite_header = va_arg(param, curl_write_callback);
+ break;
+ case CURLOPT_WRITEFUNCTION:
+ /*
+ * Set data write callback
+ */
+ data->set.fwrite_func = va_arg(param, curl_write_callback);
+ if(!data->set.fwrite_func) {
+ data->set.is_fwrite_set = 0;
+ /* When set to NULL, reset to our internal default function */
+ data->set.fwrite_func = (curl_write_callback)fwrite;
+ }
+ else
+ data->set.is_fwrite_set = 1;
+ break;
+ case CURLOPT_READFUNCTION:
+ /*
+ * Read data callback
+ */
+ data->set.fread_func = va_arg(param, curl_read_callback);
+ if(!data->set.fread_func) {
+ data->set.is_fread_set = 0;
+ /* When set to NULL, reset to our internal default function */
+ data->set.fread_func = (curl_read_callback)fread;
+ }
+ else
+ data->set.is_fread_set = 1;
+ break;
+ case CURLOPT_SEEKFUNCTION:
+ /*
+ * Seek callback. Might be NULL.
+ */
+ data->set.seek_func = va_arg(param, curl_seek_callback);
+ break;
+ case CURLOPT_SEEKDATA:
+ /*
+ * Seek control callback. Might be NULL.
+ */
+ data->set.seek_client = va_arg(param, void *);
+ break;
+ case CURLOPT_CONV_FROM_NETWORK_FUNCTION:
+ /*
+ * "Convert from network encoding" callback
+ */
+ data->set.convfromnetwork = va_arg(param, curl_conv_callback);
+ break;
+ case CURLOPT_CONV_TO_NETWORK_FUNCTION:
+ /*
+ * "Convert to network encoding" callback
+ */
+ data->set.convtonetwork = va_arg(param, curl_conv_callback);
+ break;
+ case CURLOPT_CONV_FROM_UTF8_FUNCTION:
+ /*
+ * "Convert from UTF-8 encoding" callback
+ */
+ data->set.convfromutf8 = va_arg(param, curl_conv_callback);
+ break;
+ case CURLOPT_IOCTLFUNCTION:
+ /*
+ * I/O control callback. Might be NULL.
+ */
+ data->set.ioctl_func = va_arg(param, curl_ioctl_callback);
+ break;
+ case CURLOPT_IOCTLDATA:
+ /*
+ * I/O control data pointer. Might be NULL.
+ */
+ data->set.ioctl_client = va_arg(param, void *);
+ break;
+ case CURLOPT_SSLCERT:
+ /*
+ * String that holds file name of the SSL certificate to use
+ */
+ result = setstropt(&data->set.str[STRING_CERT],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_SSLCERTTYPE:
+ /*
+ * String that holds file type of the SSL certificate to use
+ */
+ result = setstropt(&data->set.str[STRING_CERT_TYPE],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_SSLKEY:
+ /*
+ * String that holds file name of the SSL key to use
+ */
+ result = setstropt(&data->set.str[STRING_KEY],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_SSLKEYTYPE:
+ /*
+ * String that holds file type of the SSL key to use
+ */
+ result = setstropt(&data->set.str[STRING_KEY_TYPE],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_KEYPASSWD:
+ /*
+ * String that holds the SSL or SSH private key password.
+ */
+ result = setstropt(&data->set.str[STRING_KEY_PASSWD],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_SSLENGINE:
+ /*
+ * String that holds the SSL crypto engine.
+ */
+ argptr = va_arg(param, char *);
+ if(argptr && argptr[0])
+ result = Curl_ssl_set_engine(data, argptr);
+ break;
+
+ case CURLOPT_SSLENGINE_DEFAULT:
+ /*
+ * flag to set engine as default.
+ */
+ result = Curl_ssl_set_engine_default(data);
+ break;
+ case CURLOPT_CRLF:
+ /*
+ * Kludgy option to enable CRLF conversions. Subject for removal.
+ */
+ data->set.crlf = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_INTERFACE:
+ /*
+ * Set what interface or address/hostname to bind the socket to when
+ * performing an operation and thus what from-IP your connection will use.
+ */
+ result = setstropt(&data->set.str[STRING_DEVICE],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_LOCALPORT:
+ /*
+ * Set what local port to bind the socket to when performing an operation.
+ */
+ data->set.localport = curlx_sltous(va_arg(param, long));
+ break;
+ case CURLOPT_LOCALPORTRANGE:
+ /*
+ * Set number of local ports to try, starting with CURLOPT_LOCALPORT.
+ */
+ data->set.localportrange = curlx_sltosi(va_arg(param, long));
+ break;
+ case CURLOPT_KRBLEVEL:
+ /*
+ * A string that defines the kerberos security level.
+ */
+ result = setstropt(&data->set.str[STRING_KRB_LEVEL],
+ va_arg(param, char *));
+ data->set.krb = (NULL != data->set.str[STRING_KRB_LEVEL])?TRUE:FALSE;
+ break;
+ case CURLOPT_GSSAPI_DELEGATION:
+ /*
+ * GSSAPI credential delegation
+ */
+ data->set.gssapi_delegation = va_arg(param, long);
+ break;
+ case CURLOPT_SSL_VERIFYPEER:
+ /*
+ * Enable peer SSL verifying.
+ */
+ data->set.ssl.verifypeer = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_SSL_VERIFYHOST:
+ /*
+ * Enable verification of the host name in the peer certificate
+ */
+ arg = va_arg(param, long);
+
+ /* Obviously people are not reading documentation and too many thought
+ this argument took a boolean when it wasn't and misused it. We thus ban
+ 1 as a sensible input and we warn about its use. Then we only have the
+ 2 action internally stored as TRUE. */
+
+ if(1 == arg) {
+ failf(data, "CURLOPT_SSL_VERIFYHOST no longer supports 1 as value!");
+ return CURLE_BAD_FUNCTION_ARGUMENT;
+ }
+
+ data->set.ssl.verifyhost = (0 != arg)?TRUE:FALSE;
+ break;
+#ifdef USE_SSLEAY
+ /* since these two options are only possible to use on an OpenSSL-
+ powered libcurl we #ifdef them on this condition so that libcurls
+ built against other SSL libs will return a proper error when trying
+ to set this option! */
+ case CURLOPT_SSL_CTX_FUNCTION:
+ /*
+ * Set a SSL_CTX callback
+ */
+ data->set.ssl.fsslctx = va_arg(param, curl_ssl_ctx_callback);
+ break;
+ case CURLOPT_SSL_CTX_DATA:
+ /*
+ * Set a SSL_CTX callback parameter pointer
+ */
+ data->set.ssl.fsslctxp = va_arg(param, void *);
+ break;
+ case CURLOPT_CERTINFO:
+ data->set.ssl.certinfo = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+#endif
+ case CURLOPT_CAINFO:
+ /*
+ * Set CA info for SSL connection. Specify file name of the CA certificate
+ */
+ result = setstropt(&data->set.str[STRING_SSL_CAFILE],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_CAPATH:
+ /*
+ * Set CA path info for SSL connection. Specify directory name of the CA
+ * certificates which have been prepared using openssl c_rehash utility.
+ */
+ /* This does not work on windows. */
+ result = setstropt(&data->set.str[STRING_SSL_CAPATH],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_CRLFILE:
+ /*
+ * Set CRL file info for SSL connection. Specify file name of the CRL
+ * to check certificates revocation
+ */
+ result = setstropt(&data->set.str[STRING_SSL_CRLFILE],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_ISSUERCERT:
+ /*
+ * Set Issuer certificate file
+ * to check certificates issuer
+ */
+ result = setstropt(&data->set.str[STRING_SSL_ISSUERCERT],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_TELNETOPTIONS:
+ /*
+ * Set a linked list of telnet options
+ */
+ data->set.telnet_options = va_arg(param, struct curl_slist *);
+ break;
+
+ case CURLOPT_BUFFERSIZE:
+ /*
+ * The application kindly asks for a differently sized receive buffer.
+ * If it seems reasonable, we'll use it.
+ */
+ data->set.buffer_size = va_arg(param, long);
+
+ if((data->set.buffer_size> (BUFSIZE -1 )) ||
+ (data->set.buffer_size < 1))
+ data->set.buffer_size = 0; /* huge internal default */
+
+ break;
+
+ case CURLOPT_NOSIGNAL:
+ /*
+ * The application asks not to set any signal() or alarm() handlers,
+ * even when using a timeout.
+ */
+ data->set.no_signal = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_SHARE:
+ {
+ struct Curl_share *set;
+ set = va_arg(param, struct Curl_share *);
+
+ /* disconnect from old share, if any */
+ if(data->share) {
+ Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
+
+ if(data->dns.hostcachetype == HCACHE_SHARED) {
+ data->dns.hostcache = NULL;
+ data->dns.hostcachetype = HCACHE_NONE;
+ }
+
+#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES)
+ if(data->share->cookies == data->cookies)
+ data->cookies = NULL;
+#endif
+
+ if(data->share->sslsession == data->state.session)
+ data->state.session = NULL;
+
+ data->share->dirty--;
+
+ Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
+ data->share = NULL;
+ }
+
+ /* use new share if it set */
+ data->share = set;
+ if(data->share) {
+
+ Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
+
+ data->share->dirty++;
+
+ if(data->share->hostcache) {
+ /* use shared host cache, first free the private one if any */
+ if(data->dns.hostcachetype == HCACHE_PRIVATE)
+ Curl_hostcache_destroy(data);
+
+ data->dns.hostcache = data->share->hostcache;
+ data->dns.hostcachetype = HCACHE_SHARED;
+ }
+#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES)
+ if(data->share->cookies) {
+ /* use shared cookie list, first free own one if any */
+ if(data->cookies)
+ Curl_cookie_cleanup(data->cookies);
+ /* enable cookies since we now use a share that uses cookies! */
+ data->cookies = data->share->cookies;
+ }
+#endif /* CURL_DISABLE_HTTP */
+ if(data->share->sslsession) {
+ data->set.ssl.max_ssl_sessions = data->share->max_ssl_sessions;
+ data->state.session = data->share->sslsession;
+ }
+ Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
+
+ }
+ /* check for host cache not needed,
+ * it will be done by curl_easy_perform */
+ }
+ break;
+
+ case CURLOPT_PRIVATE:
+ /*
+ * Set private data pointer.
+ */
+ data->set.private_data = va_arg(param, void *);
+ break;
+
+ case CURLOPT_MAXFILESIZE:
+ /*
+ * Set the maximum size of a file to download.
+ */
+ data->set.max_filesize = va_arg(param, long);
+ break;
+
+#ifdef USE_SSL
+ case CURLOPT_USE_SSL:
+ /*
+ * Make transfers attempt to use SSL/TLS.
+ */
+ data->set.use_ssl = (curl_usessl)va_arg(param, long);
+ break;
+
+ case CURLOPT_SSL_OPTIONS:
+ arg = va_arg(param, long);
+ data->set.ssl_enable_beast = arg&CURLSSLOPT_ALLOW_BEAST?TRUE:FALSE;
+ break;
+
+#endif
+ case CURLOPT_FTPSSLAUTH:
+ /*
+ * Set a specific auth for FTP-SSL transfers.
+ */
+ data->set.ftpsslauth = (curl_ftpauth)va_arg(param, long);
+ break;
+
+ case CURLOPT_IPRESOLVE:
+ data->set.ipver = va_arg(param, long);
+ break;
+
+ case CURLOPT_MAXFILESIZE_LARGE:
+ /*
+ * Set the maximum size of a file to download.
+ */
+ data->set.max_filesize = va_arg(param, curl_off_t);
+ break;
+
+ case CURLOPT_TCP_NODELAY:
+ /*
+ * Enable or disable TCP_NODELAY, which will disable/enable the Nagle
+ * algorithm
+ */
+ data->set.tcp_nodelay = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_FTP_ACCOUNT:
+ result = setstropt(&data->set.str[STRING_FTP_ACCOUNT],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_IGNORE_CONTENT_LENGTH:
+ data->set.ignorecl = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_CONNECT_ONLY:
+ /*
+ * No data transfer, set up connection and let application use the socket
+ */
+ data->set.connect_only = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_FTP_ALTERNATIVE_TO_USER:
+ result = setstropt(&data->set.str[STRING_FTP_ALTERNATIVE_TO_USER],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_SOCKOPTFUNCTION:
+ /*
+ * socket callback function: called after socket() but before connect()
+ */
+ data->set.fsockopt = va_arg(param, curl_sockopt_callback);
+ break;
+
+ case CURLOPT_SOCKOPTDATA:
+ /*
+ * socket callback data pointer. Might be NULL.
+ */
+ data->set.sockopt_client = va_arg(param, void *);
+ break;
+
+ case CURLOPT_OPENSOCKETFUNCTION:
+ /*
+ * open/create socket callback function: called instead of socket(),
+ * before connect()
+ */
+ data->set.fopensocket = va_arg(param, curl_opensocket_callback);
+ break;
+
+ case CURLOPT_OPENSOCKETDATA:
+ /*
+ * socket callback data pointer. Might be NULL.
+ */
+ data->set.opensocket_client = va_arg(param, void *);
+ break;
+
+ case CURLOPT_CLOSESOCKETFUNCTION:
+ /*
+ * close socket callback function: called instead of close()
+ * when shutting down a connection
+ */
+ data->set.fclosesocket = va_arg(param, curl_closesocket_callback);
+ break;
+
+ case CURLOPT_CLOSESOCKETDATA:
+ /*
+ * socket callback data pointer. Might be NULL.
+ */
+ data->set.closesocket_client = va_arg(param, void *);
+ break;
+
+ case CURLOPT_SSL_SESSIONID_CACHE:
+ data->set.ssl.sessionid = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+
+#ifdef USE_LIBSSH2
+ /* we only include SSH options if explicitly built to support SSH */
+ case CURLOPT_SSH_AUTH_TYPES:
+ data->set.ssh_auth_types = va_arg(param, long);
+ break;
+
+ case CURLOPT_SSH_PUBLIC_KEYFILE:
+ /*
+ * Use this file instead of the $HOME/.ssh/id_dsa.pub file
+ */
+ result = setstropt(&data->set.str[STRING_SSH_PUBLIC_KEY],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_SSH_PRIVATE_KEYFILE:
+ /*
+ * Use this file instead of the $HOME/.ssh/id_dsa file
+ */
+ result = setstropt(&data->set.str[STRING_SSH_PRIVATE_KEY],
+ va_arg(param, char *));
+ break;
+ case CURLOPT_SSH_HOST_PUBLIC_KEY_MD5:
+ /*
+ * Option to allow for the MD5 of the host public key to be checked
+ * for validation purposes.
+ */
+ result = setstropt(&data->set.str[STRING_SSH_HOST_PUBLIC_KEY_MD5],
+ va_arg(param, char *));
+ break;
+#ifdef HAVE_LIBSSH2_KNOWNHOST_API
+ case CURLOPT_SSH_KNOWNHOSTS:
+ /*
+ * Store the file name to read known hosts from.
+ */
+ result = setstropt(&data->set.str[STRING_SSH_KNOWNHOSTS],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_SSH_KEYFUNCTION:
+ /* setting to NULL is fine since the curl_ssh.c functions themselves will
+ then rever to use the internal default */
+ data->set.ssh_keyfunc = va_arg(param, curl_sshkeycallback);
+ break;
+
+ case CURLOPT_SSH_KEYDATA:
+ /*
+ * Custom client data to pass to the SSH keyfunc callback
+ */
+ data->set.ssh_keyfunc_userp = va_arg(param, void *);
+ break;
+#endif /* HAVE_LIBSSH2_KNOWNHOST_API */
+
+#endif /* USE_LIBSSH2 */
+
+ case CURLOPT_HTTP_TRANSFER_DECODING:
+ /*
+ * disable libcurl transfer encoding is used
+ */
+ data->set.http_te_skip = (0 == va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_HTTP_CONTENT_DECODING:
+ /*
+ * raw data passed to the application when content encoding is used
+ */
+ data->set.http_ce_skip = (0 == va_arg(param, long))?TRUE:FALSE;
+ break;
+
+ case CURLOPT_NEW_FILE_PERMS:
+ /*
+ * Uses these permissions instead of 0644
+ */
+ data->set.new_file_perms = va_arg(param, long);
+ break;
+
+ case CURLOPT_NEW_DIRECTORY_PERMS:
+ /*
+ * Uses these permissions instead of 0755
+ */
+ data->set.new_directory_perms = va_arg(param, long);
+ break;
+
+ case CURLOPT_ADDRESS_SCOPE:
+ /*
+ * We always get longs when passed plain numericals, but for this value we
+ * know that an unsigned int will always hold the value so we blindly
+ * typecast to this type
+ */
+ data->set.scope = curlx_sltoui(va_arg(param, long));
+ break;
+
+ case CURLOPT_PROTOCOLS:
+ /* set the bitmask for the protocols that are allowed to be used for the
+ transfer, which thus helps the app which takes URLs from users or other
+ external inputs and want to restrict what protocol(s) to deal
+ with. Defaults to CURLPROTO_ALL. */
+ data->set.allowed_protocols = va_arg(param, long);
+ break;
+
+ case CURLOPT_REDIR_PROTOCOLS:
+ /* set the bitmask for the protocols that libcurl is allowed to follow to,
+ as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs
+ to be set in both bitmasks to be allowed to get redirected to. Defaults
+ to all protocols except FILE and SCP. */
+ data->set.redir_protocols = va_arg(param, long);
+ break;
+
+ case CURLOPT_MAIL_FROM:
+ result = setstropt(&data->set.str[STRING_MAIL_FROM],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_MAIL_AUTH:
+ result = setstropt(&data->set.str[STRING_MAIL_AUTH],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_MAIL_RCPT:
+ /* get a list of mail recipients */
+ data->set.mail_rcpt = va_arg(param, struct curl_slist *);
+ break;
+
+ case CURLOPT_RTSP_REQUEST:
+ {
+ /*
+ * Set the RTSP request method (OPTIONS, SETUP, PLAY, etc...)
+ * Would this be better if the RTSPREQ_* were just moved into here?
+ */
+ long curl_rtspreq = va_arg(param, long);
+ Curl_RtspReq rtspreq = RTSPREQ_NONE;
+ switch(curl_rtspreq) {
+ case CURL_RTSPREQ_OPTIONS:
+ rtspreq = RTSPREQ_OPTIONS;
+ break;
+
+ case CURL_RTSPREQ_DESCRIBE:
+ rtspreq = RTSPREQ_DESCRIBE;
+ break;
+
+ case CURL_RTSPREQ_ANNOUNCE:
+ rtspreq = RTSPREQ_ANNOUNCE;
+ break;
+
+ case CURL_RTSPREQ_SETUP:
+ rtspreq = RTSPREQ_SETUP;
+ break;
+
+ case CURL_RTSPREQ_PLAY:
+ rtspreq = RTSPREQ_PLAY;
+ break;
+
+ case CURL_RTSPREQ_PAUSE:
+ rtspreq = RTSPREQ_PAUSE;
+ break;
+
+ case CURL_RTSPREQ_TEARDOWN:
+ rtspreq = RTSPREQ_TEARDOWN;
+ break;
+
+ case CURL_RTSPREQ_GET_PARAMETER:
+ rtspreq = RTSPREQ_GET_PARAMETER;
+ break;
+
+ case CURL_RTSPREQ_SET_PARAMETER:
+ rtspreq = RTSPREQ_SET_PARAMETER;
+ break;
+
+ case CURL_RTSPREQ_RECORD:
+ rtspreq = RTSPREQ_RECORD;
+ break;
+
+ case CURL_RTSPREQ_RECEIVE:
+ rtspreq = RTSPREQ_RECEIVE;
+ break;
+ default:
+ rtspreq = RTSPREQ_NONE;
+ }
+
+ data->set.rtspreq = rtspreq;
+ break;
+ }
+
+
+ case CURLOPT_RTSP_SESSION_ID:
+ /*
+ * Set the RTSP Session ID manually. Useful if the application is
+ * resuming a previously established RTSP session
+ */
+ result = setstropt(&data->set.str[STRING_RTSP_SESSION_ID],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_RTSP_STREAM_URI:
+ /*
+ * Set the Stream URI for the RTSP request. Unless the request is
+ * for generic server options, the application will need to set this.
+ */
+ result = setstropt(&data->set.str[STRING_RTSP_STREAM_URI],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_RTSP_TRANSPORT:
+ /*
+ * The content of the Transport: header for the RTSP request
+ */
+ result = setstropt(&data->set.str[STRING_RTSP_TRANSPORT],
+ va_arg(param, char *));
+ break;
+
+ case CURLOPT_RTSP_CLIENT_CSEQ:
+ /*
+ * Set the CSEQ number to issue for the next RTSP request. Useful if the
+ * application is resuming a previously broken connection. The CSEQ
+ * will increment from this new number henceforth.
+ */
+ data->state.rtsp_next_client_CSeq = va_arg(param, long);
+ break;
+
+ case CURLOPT_RTSP_SERVER_CSEQ:
+ /* Same as the above, but for server-initiated requests */
+ data->state.rtsp_next_client_CSeq = va_arg(param, long);
+ break;
+
+ case CURLOPT_INTERLEAVEDATA:
+ data->set.rtp_out = va_arg(param, void *);
+ break;
+ case CURLOPT_INTERLEAVEFUNCTION:
+ /* Set the user defined RTP write function */
+ data->set.fwrite_rtp = va_arg(param, curl_write_callback);
+ break;
+
+ case CURLOPT_WILDCARDMATCH:
+ data->set.wildcardmatch = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_CHUNK_BGN_FUNCTION:
+ data->set.chunk_bgn = va_arg(param, curl_chunk_bgn_callback);
+ break;
+ case CURLOPT_CHUNK_END_FUNCTION:
+ data->set.chunk_end = va_arg(param, curl_chunk_end_callback);
+ break;
+ case CURLOPT_FNMATCH_FUNCTION:
+ data->set.fnmatch = va_arg(param, curl_fnmatch_callback);
+ break;
+ case CURLOPT_CHUNK_DATA:
+ data->wildcard.customptr = va_arg(param, void *);
+ break;
+ case CURLOPT_FNMATCH_DATA:
+ data->set.fnmatch_data = va_arg(param, void *);
+ break;
+#ifdef USE_TLS_SRP
+ case CURLOPT_TLSAUTH_USERNAME:
+ result = setstropt(&data->set.str[STRING_TLSAUTH_USERNAME],
+ va_arg(param, char *));
+ if(data->set.str[STRING_TLSAUTH_USERNAME] && !data->set.ssl.authtype)
+ data->set.ssl.authtype = CURL_TLSAUTH_SRP; /* default to SRP */
+ break;
+ case CURLOPT_TLSAUTH_PASSWORD:
+ result = setstropt(&data->set.str[STRING_TLSAUTH_PASSWORD],
+ va_arg(param, char *));
+ if(data->set.str[STRING_TLSAUTH_USERNAME] && !data->set.ssl.authtype)
+ data->set.ssl.authtype = CURL_TLSAUTH_SRP; /* default to SRP */
+ break;
+ case CURLOPT_TLSAUTH_TYPE:
+ if(strnequal((char *)va_arg(param, char *), "SRP", strlen("SRP")))
+ data->set.ssl.authtype = CURL_TLSAUTH_SRP;
+ else
+ data->set.ssl.authtype = CURL_TLSAUTH_NONE;
+ break;
+#endif
+ case CURLOPT_DNS_SERVERS:
+ result = Curl_set_dns_servers(data, va_arg(param, char *));
+ break;
+
+ case CURLOPT_TCP_KEEPALIVE:
+ data->set.tcp_keepalive = (0 != va_arg(param, long))?TRUE:FALSE;
+ break;
+ case CURLOPT_TCP_KEEPIDLE:
+ data->set.tcp_keepidle = va_arg(param, long);
+ break;
+ case CURLOPT_TCP_KEEPINTVL:
+ data->set.tcp_keepintvl = va_arg(param, long);
+ break;
+
+ default:
+ /* unknown tag and its companion, just ignore: */
+ result = CURLE_UNKNOWN_OPTION;
+ break;
+ }
+
+ return result;
+}
+
+static void conn_free(struct connectdata *conn)
+{
+ if(!conn)
+ return;
+
+ /* possible left-overs from the async name resolvers */
+ Curl_resolver_cancel(conn);
+
+ /* close the SSL stuff before we close any sockets since they will/may
+ write to the sockets */
+ Curl_ssl_close(conn, FIRSTSOCKET);
+ Curl_ssl_close(conn, SECONDARYSOCKET);
+
+ /* close possibly still open sockets */
+ if(CURL_SOCKET_BAD != conn->sock[SECONDARYSOCKET])
+ Curl_closesocket(conn, conn->sock[SECONDARYSOCKET]);
+ if(CURL_SOCKET_BAD != conn->sock[FIRSTSOCKET])
+ Curl_closesocket(conn, conn->sock[FIRSTSOCKET]);
+
+#if defined(USE_NTLM) && defined(NTLM_WB_ENABLED)
+ Curl_ntlm_wb_cleanup(conn);
+#endif
+
+ Curl_safefree(conn->user);
+ Curl_safefree(conn->passwd);
+ Curl_safefree(conn->proxyuser);
+ Curl_safefree(conn->proxypasswd);
+ Curl_safefree(conn->allocptr.proxyuserpwd);
+ Curl_safefree(conn->allocptr.uagent);
+ Curl_safefree(conn->allocptr.userpwd);
+ Curl_safefree(conn->allocptr.accept_encoding);
+ Curl_safefree(conn->allocptr.te);
+ Curl_safefree(conn->allocptr.rangeline);
+ Curl_safefree(conn->allocptr.ref);
+ Curl_safefree(conn->allocptr.host);
+ Curl_safefree(conn->allocptr.cookiehost);
+ Curl_safefree(conn->allocptr.rtsp_transport);
+ Curl_safefree(conn->trailer);
+ Curl_safefree(conn->host.rawalloc); /* host name buffer */
+ Curl_safefree(conn->proxy.rawalloc); /* proxy name buffer */
+ Curl_safefree(conn->master_buffer);
+
+ Curl_llist_destroy(conn->send_pipe, NULL);
+ Curl_llist_destroy(conn->recv_pipe, NULL);
+ Curl_llist_destroy(conn->pend_pipe, NULL);
+ Curl_llist_destroy(conn->done_pipe, NULL);
+
+ conn->send_pipe = NULL;
+ conn->recv_pipe = NULL;
+ conn->pend_pipe = NULL;
+ conn->done_pipe = NULL;
+
+ Curl_safefree(conn->localdev);
+ Curl_free_ssl_config(&conn->ssl_config);
+
+ free(conn); /* free all the connection oriented data */
+}
+
+CURLcode Curl_disconnect(struct connectdata *conn, bool dead_connection)
+{
+ struct SessionHandle *data;
+ if(!conn)
+ return CURLE_OK; /* this is closed and fine already */
+ data = conn->data;
+
+ if(!data) {
+ DEBUGF(fprintf(stderr, "DISCONNECT without easy handle, ignoring\n"));
+ return CURLE_OK;
+ }
+
+ if(conn->dns_entry != NULL) {
+ Curl_resolv_unlock(data, conn->dns_entry);
+ conn->dns_entry = NULL;
+ }
+
+ Curl_hostcache_prune(data); /* kill old DNS cache entries */
+
+ {
+ int has_host_ntlm = (conn->ntlm.state != NTLMSTATE_NONE);
+ int has_proxy_ntlm = (conn->proxyntlm.state != NTLMSTATE_NONE);
+
+ /* Authentication data is a mix of connection-related and sessionhandle-
+ related stuff. NTLM is connection-related so when we close the shop
+ we shall forget. */
+
+ if(has_host_ntlm) {
+ data->state.authhost.done = FALSE;
+ data->state.authhost.picked =
+ data->state.authhost.want;
+ }
+
+ if(has_proxy_ntlm) {
+ data->state.authproxy.done = FALSE;
+ data->state.authproxy.picked =
+ data->state.authproxy.want;
+ }
+
+ if(has_host_ntlm || has_proxy_ntlm) {
+ data->state.authproblem = FALSE;
+
+ Curl_http_ntlm_cleanup(conn);
+ }
+ }
+
+ /* Cleanup possible redirect junk */
+ if(data->req.newurl) {
+ free(data->req.newurl);
+ data->req.newurl = NULL;
+ }
+
+ if(conn->handler->disconnect)
+ /* This is set if protocol-specific cleanups should be made */
+ conn->handler->disconnect(conn, dead_connection);
+
+ /* unlink ourselves! */
+ infof(data, "Closing connection %d\n", conn->connection_id);
+ Curl_conncache_remove_conn(data->state.conn_cache, conn);
+
+#if defined(USE_LIBIDN)
+ if(conn->host.encalloc)
+ idn_free(conn->host.encalloc); /* encoded host name buffer, must be freed
+ with idn_free() since this was allocated
+ by libidn */
+ if(conn->proxy.encalloc)
+ idn_free(conn->proxy.encalloc); /* encoded proxy name buffer, must be
+ freed with idn_free() since this was
+ allocated by libidn */
+#elif defined(USE_WIN32_IDN)
+ free(conn->host.encalloc); /* encoded host name buffer, must be freed with
+ idn_free() since this was allocated by
+ curl_win32_idn_to_ascii */
+ if(conn->proxy.encalloc)
+ free(conn->proxy.encalloc); /* encoded proxy name buffer, must be freed
+ with idn_free() since this was allocated by
+ curl_win32_idn_to_ascii */
+#endif
+
+ Curl_ssl_close(conn, FIRSTSOCKET);
+
+ /* Indicate to all handles on the pipe that we're dead */
+ if(Curl_isPipeliningEnabled(data)) {
+ signalPipeClose(conn->send_pipe, TRUE);
+ signalPipeClose(conn->recv_pipe, TRUE);
+ signalPipeClose(conn->pend_pipe, TRUE);
+ signalPipeClose(conn->done_pipe, FALSE);
+ }
+
+ conn_free(conn);
+ data->state.current_conn = NULL;
+ Curl_speedinit(data);
+
+ return CURLE_OK;
+}
+
+/*
+ * This function should return TRUE if the socket is to be assumed to
+ * be dead. Most commonly this happens when the server has closed the
+ * connection due to inactivity.
+ */
+static bool SocketIsDead(curl_socket_t sock)
+{
+ int sval;
+ bool ret_val = TRUE;
+
+ sval = Curl_socket_ready(sock, CURL_SOCKET_BAD, 0);
+ if(sval == 0)
+ /* timeout */
+ ret_val = FALSE;
+
+ return ret_val;
+}
+
+static bool IsPipeliningPossible(const struct SessionHandle *handle,
+ const struct connectdata *conn)
+{
+ if((conn->handler->protocol & CURLPROTO_HTTP) &&
+ handle->multi && Curl_multi_canPipeline(handle->multi) &&
+ (handle->set.httpreq == HTTPREQ_GET ||
+ handle->set.httpreq == HTTPREQ_HEAD) &&
+ handle->set.httpversion != CURL_HTTP_VERSION_1_0)
+ return TRUE;
+
+ return FALSE;
+}
+
+bool Curl_isPipeliningEnabled(const struct SessionHandle *handle)
+{
+ if(handle->multi && Curl_multi_canPipeline(handle->multi))
+ return TRUE;
+
+ return FALSE;
+}
+
+CURLcode Curl_addHandleToPipeline(struct SessionHandle *data,
+ struct curl_llist *pipeline)
+{
+ if(!Curl_llist_insert_next(pipeline, pipeline->tail, data))
+ return CURLE_OUT_OF_MEMORY;
+ return CURLE_OK;
+}
+
+int Curl_removeHandleFromPipeline(struct SessionHandle *handle,
+ struct curl_llist *pipeline)
+{
+ struct curl_llist_element *curr;
+
+ curr = pipeline->head;
+ while(curr) {
+ if(curr->ptr == handle) {
+ Curl_llist_remove(pipeline, curr, NULL);
+ return 1; /* we removed a handle */
+ }
+ curr = curr->next;
+ }
+
+ return 0;
+}
+
+#if 0 /* this code is saved here as it is useful for debugging purposes */
+static void Curl_printPipeline(struct curl_llist *pipeline)
+{
+ struct curl_llist_element *curr;
+
+ curr = pipeline->head;
+ while(curr) {
+ struct SessionHandle *data = (struct SessionHandle *) curr->ptr;
+ infof(data, "Handle in pipeline: %s\n", data->state.path);
+ curr = curr->next;
+ }
+}
+#endif
+
+static struct SessionHandle* gethandleathead(struct curl_llist *pipeline)
+{
+ struct curl_llist_element *curr = pipeline->head;
+ if(curr) {
+ return (struct SessionHandle *) curr->ptr;
+ }
+
+ return NULL;
+}
+
+/* remove the specified connection from all (possible) pipelines and related
+ queues */
+void Curl_getoff_all_pipelines(struct SessionHandle *data,
+ struct connectdata *conn)
+{
+ bool recv_head = (conn->readchannel_inuse &&
+ (gethandleathead(conn->recv_pipe) == data)) ? TRUE : FALSE;
+
+ bool send_head = (conn->writechannel_inuse &&
+ (gethandleathead(conn->send_pipe) == data)) ? TRUE : FALSE;
+
+ if(Curl_removeHandleFromPipeline(data, conn->recv_pipe) && recv_head)
+ conn->readchannel_inuse = FALSE;
+ if(Curl_removeHandleFromPipeline(data, conn->send_pipe) && send_head)
+ conn->writechannel_inuse = FALSE;
+ Curl_removeHandleFromPipeline(data, conn->pend_pipe);
+ Curl_removeHandleFromPipeline(data, conn->done_pipe);
+}
+
+static void signalPipeClose(struct curl_llist *pipeline, bool pipe_broke)
+{
+ struct curl_llist_element *curr;
+
+ if(!pipeline)
+ return;
+
+ curr = pipeline->head;
+ while(curr) {
+ struct curl_llist_element *next = curr->next;
+ struct SessionHandle *data = (struct SessionHandle *) curr->ptr;
+
+#ifdef DEBUGBUILD /* debug-only code */
+ if(data->magic != CURLEASY_MAGIC_NUMBER) {
+ /* MAJOR BADNESS */
+ infof(data, "signalPipeClose() found BAAD easy handle\n");
+ }
+#endif
+
+ if(pipe_broke)
+ data->state.pipe_broke = TRUE;
+ Curl_multi_handlePipeBreak(data);
+ Curl_llist_remove(pipeline, curr, NULL);
+ curr = next;
+ }
+}
+
+
+/*
+ * Given one filled in connection struct (named needle), this function should
+ * detect if there already is one that has all the significant details
+ * exactly the same and thus should be used instead.
+ *
+ * If there is a match, this function returns TRUE - and has marked the
+ * connection as 'in-use'. It must later be called with ConnectionDone() to
+ * return back to 'idle' (unused) state.
+ */
+static bool
+ConnectionExists(struct SessionHandle *data,
+ struct connectdata *needle,
+ struct connectdata **usethis)
+{
+ struct connectdata *check;
+ struct connectdata *chosen = 0;
+ bool canPipeline = IsPipeliningPossible(data, needle);
+ bool wantNTLM = (data->state.authhost.want==CURLAUTH_NTLM) ||
+ (data->state.authhost.want==CURLAUTH_NTLM_WB) ? TRUE : FALSE;
+ struct connectbundle *bundle;
+
+ /* Look up the bundle with all the connections to this
+ particular host */
+ bundle = Curl_conncache_find_bundle(data->state.conn_cache,
+ needle->host.name);
+ if(bundle) {
+ struct curl_llist_element *curr;
+
+ infof(data, "Found bundle for host %s: %p\n", needle->host.name, bundle);
+
+ curr = bundle->conn_list->head;
+ while(curr) {
+ bool match = FALSE;
+ bool credentialsMatch = FALSE;
+ size_t pipeLen;
+
+ /*
+ * Note that if we use a HTTP proxy, we check connections to that
+ * proxy and not to the actual remote server.
+ */
+ check = curr->ptr;
+ curr = curr->next;
+
+ pipeLen = check->send_pipe->size + check->recv_pipe->size;
+
+ if(!pipeLen && !check->inuse) {
+ /* The check for a dead socket makes sense only if there are no
+ handles in pipeline and the connection isn't already marked in
+ use */
+ bool dead;
+ if(check->handler->protocol & CURLPROTO_RTSP)
+ /* RTSP is a special case due to RTP interleaving */
+ dead = Curl_rtsp_connisdead(check);
+ else
+ dead = SocketIsDead(check->sock[FIRSTSOCKET]);
+
+ if(dead) {
+ check->data = data;
+ infof(data, "Connection %d seems to be dead!\n",
+ check->connection_id);
+
+ /* disconnect resources */
+ Curl_disconnect(check, /* dead_connection */ TRUE);
+ continue;
+ }
+ }
+
+ if(canPipeline) {
+ /* Make sure the pipe has only GET requests */
+ struct SessionHandle* sh = gethandleathead(check->send_pipe);
+ struct SessionHandle* rh = gethandleathead(check->recv_pipe);
+ if(sh) {
+ if(!IsPipeliningPossible(sh, check))
+ continue;
+ }
+ else if(rh) {
+ if(!IsPipeliningPossible(rh, check))
+ continue;
+ }
+#ifdef DEBUGBUILD
+ if(pipeLen > MAX_PIPELINE_LENGTH) {
+ infof(data, "BAD! Connection #%ld has too big pipeline!\n",
+ check->connection_id);
+ }
+#endif
+ }
+ else {
+ if(pipeLen > 0) {
+ /* can only happen within multi handles, and means that another easy
+ handle is using this connection */
+ continue;
+ }
+
+ if(Curl_resolver_asynch()) {
+ /* ip_addr_str[0] is NUL only if the resolving of the name hasn't
+ completed yet and until then we don't re-use this connection */
+ if(!check->ip_addr_str[0]) {
+ infof(data,
+ "Connection #%ld is still name resolving, can't reuse\n",
+ check->connection_id);
+ continue;
+ }
+ }
+
+ if((check->sock[FIRSTSOCKET] == CURL_SOCKET_BAD) ||
+ check->bits.close) {
+ /* Don't pick a connection that hasn't connected yet or that is going
+ to get closed. */
+ infof(data, "Connection #%ld isn't open enough, can't reuse\n",
+ check->connection_id);
+#ifdef DEBUGBUILD
+ if(check->recv_pipe->size > 0) {
+ infof(data,
+ "BAD! Unconnected #%ld has a non-empty recv pipeline!\n",
+ check->connection_id);
+ }
+#endif
+ continue;
+ }
+ }
+
+ if((needle->handler->flags&PROTOPT_SSL) !=
+ (check->handler->flags&PROTOPT_SSL))
+ /* don't do mixed SSL and non-SSL connections */
+ if(!(needle->handler->protocol & check->handler->protocol))
+ /* except protocols that have been upgraded via TLS */
+ continue;
+
+ if(needle->handler->flags&PROTOPT_SSL) {
+ if((data->set.ssl.verifypeer != check->verifypeer) ||
+ (data->set.ssl.verifyhost != check->verifyhost))
+ continue;
+ }
+
+ if(needle->bits.proxy != check->bits.proxy)
+ /* don't do mixed proxy and non-proxy connections */
+ continue;
+
+ if(!canPipeline && check->inuse)
+ /* this request can't be pipelined but the checked connection is
+ already in use so we skip it */
+ continue;
+
+ if(needle->localdev || needle->localport) {
+ /* If we are bound to a specific local end (IP+port), we must not
+ re-use a random other one, although if we didn't ask for a
+ particular one we can reuse one that was bound.
+
+ This comparison is a bit rough and too strict. Since the input
+ parameters can be specified in numerous ways and still end up the
+ same it would take a lot of processing to make it really accurate.
+ Instead, this matching will assume that re-uses of bound connections
+ will most likely also re-use the exact same binding parameters and
+ missing out a few edge cases shouldn't hurt anyone very much.
+ */
+ if((check->localport != needle->localport) ||
+ (check->localportrange != needle->localportrange) ||
+ !check->localdev ||
+ !needle->localdev ||
+ strcmp(check->localdev, needle->localdev))
+ continue;
+ }
+
+ if(!needle->bits.httpproxy || needle->handler->flags&PROTOPT_SSL ||
+ (needle->bits.httpproxy && check->bits.httpproxy &&
+ needle->bits.tunnel_proxy && check->bits.tunnel_proxy &&
+ Curl_raw_equal(needle->proxy.name, check->proxy.name) &&
+ (needle->port == check->port))) {
+ /* The requested connection does not use a HTTP proxy or it uses SSL or
+ it is a non-SSL protocol tunneled over the same http proxy name and
+ port number or it is a non-SSL protocol which is allowed to be
+ upgraded via TLS */
+
+ if((Curl_raw_equal(needle->handler->scheme, check->handler->scheme) ||
+ needle->handler->protocol & check->handler->protocol) &&
+ Curl_raw_equal(needle->host.name, check->host.name) &&
+ needle->remote_port == check->remote_port) {
+ if(needle->handler->flags & PROTOPT_SSL) {
+ /* This is a SSL connection so verify that we're using the same
+ SSL options as well */
+ if(!Curl_ssl_config_matches(&needle->ssl_config,
+ &check->ssl_config)) {
+ DEBUGF(infof(data,
+ "Connection #%ld has different SSL parameters, "
+ "can't reuse\n",
+ check->connection_id));
+ continue;
+ }
+ else if(check->ssl[FIRSTSOCKET].state != ssl_connection_complete) {
+ DEBUGF(infof(data,
+ "Connection #%ld has not started SSL connect, "
+ "can't reuse\n",
+ check->connection_id));
+ continue;
+ }
+ }
+ if((needle->handler->protocol & CURLPROTO_FTP) ||
+ ((needle->handler->protocol & CURLPROTO_HTTP) && wantNTLM)) {
+ /* This is FTP or HTTP+NTLM, verify that we're using the same name
+ and password as well */
+ if(!strequal(needle->user, check->user) ||
+ !strequal(needle->passwd, check->passwd)) {
+ /* one of them was different */
+ continue;
+ }
+ credentialsMatch = TRUE;
+ }
+ match = TRUE;
+ }
+ }
+ else { /* The requested needle connection is using a proxy,
+ is the checked one using the same host, port and type? */
+ if(check->bits.proxy &&
+ (needle->proxytype == check->proxytype) &&
+ (needle->bits.tunnel_proxy == check->bits.tunnel_proxy) &&
+ Curl_raw_equal(needle->proxy.name, check->proxy.name) &&
+ needle->port == check->port) {
+ /* This is the same proxy connection, use it! */
+ match = TRUE;
+ }
+ }
+
+ if(match) {
+ chosen = check;
+
+ /* If we are not looking for an NTLM connection, we can choose this one
+ immediately. */
+ if(!wantNTLM)
+ break;
+
+ /* Otherwise, check if this is already authenticating with the right
+ credentials. If not, keep looking so that we can reuse NTLM
+ connections if possible. (Especially we must reuse the same
+ connection if partway through a handshake!) */
+ if(credentialsMatch && chosen->ntlm.state != NTLMSTATE_NONE)
+ break;
+ }
+ }
+ }
+
+ if(chosen) {
+ chosen->inuse = TRUE; /* mark this as being in use so that no other
+ handle in a multi stack may nick it */
+ *usethis = chosen;
+ return TRUE; /* yes, we found one to use! */
+ }
+
+ return FALSE; /* no matching connecting exists */
+}
+
+/*
+ * This function kills and removes an existing connection in the connection
+ * cache. The connection that has been unused for the longest time.
+ *
+ * Returns FALSE if it can't find any unused connection to kill.
+ */
+static bool
+ConnectionKillOne(struct SessionHandle *data)
+{
+ struct conncache *bc = data->state.conn_cache;
+ struct curl_hash_iterator iter;
+ struct curl_llist_element *curr;
+ struct curl_hash_element *he;
+ long highscore=-1;
+ long score;
+ struct timeval now;
+ struct connectdata *conn_candidate = NULL;
+ struct connectbundle *bundle;
+
+ now = Curl_tvnow();
+
+ Curl_hash_start_iterate(bc->hash, &iter);
+
+ he = Curl_hash_next_element(&iter);
+ while(he) {
+ struct connectdata *conn;
+
+ bundle = he->ptr;
+
+ curr = bundle->conn_list->head;
+ while(curr) {
+ conn = curr->ptr;
+
+ if(!conn->inuse) {
+ /* Set higher score for the age passed since the connection was used */
+ score = Curl_tvdiff(now, conn->now);
+
+ if(score > highscore) {
+ highscore = score;
+ conn_candidate = conn;
+ }
+ }
+ curr = curr->next;
+ }
+
+ he = Curl_hash_next_element(&iter);
+ }
+
+ if(conn_candidate) {
+ /* Set the connection's owner correctly */
+ conn_candidate->data = data;
+
+ bundle = conn_candidate->bundle;
+
+ /* the winner gets the honour of being disconnected */
+ (void)Curl_disconnect(conn_candidate, /* dead_connection */ FALSE);
+
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/* this connection can now be marked 'idle' */
+static void
+ConnectionDone(struct connectdata *conn)
+{
+ conn->inuse = FALSE;
+}
+
+/*
+ * The given input connection struct pointer is to be stored in the connection
+ * cache. If the cache is already full, least interesting existing connection
+ * (if any) gets closed.
+ *
+ * The given connection should be unique. That must've been checked prior to
+ * this call.
+ */
+static CURLcode ConnectionStore(struct SessionHandle *data,
+ struct connectdata *conn)
+{
+ static int connection_id_counter = 0;
+
+ CURLcode result;
+
+ /* Assign a number to the connection for easier tracking in the log
+ output */
+ conn->connection_id = connection_id_counter++;
+
+ result = Curl_conncache_add_conn(data->state.conn_cache, conn);
+ if(result != CURLE_OK)
+ conn->connection_id = -1;
+
+ return result;
+}
+
+/* after a TCP connection to the proxy has been verified, this function does
+ the next magic step.
+
+ Note: this function's sub-functions call failf()
+
+*/
+CURLcode Curl_connected_proxy(struct connectdata *conn)
+{
+ switch(conn->proxytype) {
+#ifndef CURL_DISABLE_PROXY
+ case CURLPROXY_SOCKS5:
+ case CURLPROXY_SOCKS5_HOSTNAME:
+ return Curl_SOCKS5(conn->proxyuser, conn->proxypasswd,
+ conn->host.name, conn->remote_port,
+ FIRSTSOCKET, conn);
+
+ case CURLPROXY_SOCKS4:
+ return Curl_SOCKS4(conn->proxyuser, conn->host.name,
+ conn->remote_port, FIRSTSOCKET, conn, FALSE);
+
+ case CURLPROXY_SOCKS4A:
+ return Curl_SOCKS4(conn->proxyuser, conn->host.name,
+ conn->remote_port, FIRSTSOCKET, conn, TRUE);
+
+#endif /* CURL_DISABLE_PROXY */
+ case CURLPROXY_HTTP:
+ case CURLPROXY_HTTP_1_0:
+ /* do nothing here. handled later. */
+ break;
+ default:
+ break;
+ } /* switch proxytype */
+
+ return CURLE_OK;
+}
+
+static CURLcode ConnectPlease(struct SessionHandle *data,
+ struct connectdata *conn,
+ bool *connected)
+{
+ CURLcode result;
+ Curl_addrinfo *addr;
+#ifndef CURL_DISABLE_VERBOSE_STRINGS
+ char *hostname = conn->bits.proxy?conn->proxy.name:conn->host.name;
+
+ infof(data, "About to connect() to %s%s port %ld (#%ld)\n",
+ conn->bits.proxy?"proxy ":"",
+ hostname, conn->port, conn->connection_id);
+#else
+ (void)data;
+#endif
+
+ /*************************************************************
+ * Connect to server/proxy
+ *************************************************************/
+ result= Curl_connecthost(conn,
+ conn->dns_entry,
+ &conn->sock[FIRSTSOCKET],
+ &addr,
+ connected);
+ if(CURLE_OK == result) {
+ /* All is cool, we store the current information */
+ conn->ip_addr = addr;
+
+ if(*connected) {
+ result = Curl_connected_proxy(conn);
+ if(!result) {
+ conn->bits.tcpconnect[FIRSTSOCKET] = TRUE;
+ Curl_pgrsTime(data, TIMER_CONNECT); /* connect done */
+ }
+ }
+ }
+
+ if(result)
+ *connected = FALSE; /* mark it as not connected */
+
+ return result;
+}
+
+/*
+ * verboseconnect() displays verbose information after a connect
+ */
+#ifndef CURL_DISABLE_VERBOSE_STRINGS
+void Curl_verboseconnect(struct connectdata *conn)
+{
+ if(conn->data->set.verbose)
+ infof(conn->data, "Connected to %s (%s) port %ld (#%ld)\n",
+ conn->bits.proxy ? conn->proxy.dispname : conn->host.dispname,
+ conn->ip_addr_str, conn->port, conn->connection_id);
+}
+#endif
+
+int Curl_protocol_getsock(struct connectdata *conn,
+ curl_socket_t *socks,
+ int numsocks)
+{
+ if(conn->handler->proto_getsock)
+ return conn->handler->proto_getsock(conn, socks, numsocks);
+ return GETSOCK_BLANK;
+}
+
+int Curl_doing_getsock(struct connectdata *conn,
+ curl_socket_t *socks,
+ int numsocks)
+{
+ if(conn && conn->handler->doing_getsock)
+ return conn->handler->doing_getsock(conn, socks, numsocks);
+ return GETSOCK_BLANK;
+}
+
+/*
+ * We are doing protocol-specific connecting and this is being called over and
+ * over from the multi interface until the connection phase is done on
+ * protocol layer.
+ */
+
+CURLcode Curl_protocol_connecting(struct connectdata *conn,
+ bool *done)
+{
+ CURLcode result=CURLE_OK;
+
+ if(conn && conn->handler->connecting) {
+ *done = FALSE;
+ result = conn->handler->connecting(conn, done);
+ }
+ else
+ *done = TRUE;
+
+ return result;
+}
+
+/*
+ * We are DOING this is being called over and over from the multi interface
+ * until the DOING phase is done on protocol layer.
+ */
+
+CURLcode Curl_protocol_doing(struct connectdata *conn, bool *done)
+{
+ CURLcode result=CURLE_OK;
+
+ if(conn && conn->handler->doing) {
+ *done = FALSE;
+ result = conn->handler->doing(conn, done);
+ }
+ else
+ *done = TRUE;
+
+ return result;
+}
+
+/*
+ * We have discovered that the TCP connection has been successful, we can now
+ * proceed with some action.
+ *
+ */
+CURLcode Curl_protocol_connect(struct connectdata *conn,
+ bool *protocol_done)
+{
+ CURLcode result=CURLE_OK;
+ struct SessionHandle *data = conn->data;
+
+ *protocol_done = FALSE;
+
+ if(conn->bits.tcpconnect[FIRSTSOCKET] && conn->bits.protoconnstart) {
+ /* We already are connected, get back. This may happen when the connect
+ worked fine in the first call, like when we connect to a local server
+ or proxy. Note that we don't know if the protocol is actually done.
+
+ Unless this protocol doesn't have any protocol-connect callback, as
+ then we know we're done. */
+ if(!conn->handler->connecting)
+ *protocol_done = TRUE;
+
+ return CURLE_OK;
+ }
+
+ Curl_pgrsTime(data, TIMER_CONNECT); /* connect done */
+ Curl_verboseconnect(conn);
+
+ if(!conn->bits.protoconnstart) {
+
+ /* Set start time here for timeout purposes in the connect procedure, it
+ is later set again for the progress meter purpose */
+ conn->now = Curl_tvnow();
+
+ result = Curl_proxy_connect(conn);
+ if(result)
+ return result;
+
+ if(conn->handler->connect_it) {
+ /* is there a protocol-specific connect() procedure? */
+
+ /* Call the protocol-specific connect function */
+ result = conn->handler->connect_it(conn, protocol_done);
+ }
+ else
+ *protocol_done = TRUE;
+
+ /* it has started, possibly even completed but that knowledge isn't stored
+ in this bit! */
+ if(!result)
+ conn->bits.protoconnstart = TRUE;
+ }
+
+ return result; /* pass back status */
+}
+
+/*
+ * Helpers for IDNA convertions.
+ */
+static bool is_ASCII_name(const char *hostname)
+{
+ const unsigned char *ch = (const unsigned char*)hostname;
+
+ while(*ch) {
+ if(*ch++ & 0x80)
+ return FALSE;
+ }
+ return TRUE;
+}
+
+#ifdef USE_LIBIDN
+/*
+ * Check if characters in hostname is allowed in Top Level Domain.
+ */
+static bool tld_check_name(struct SessionHandle *data,
+ const char *ace_hostname)
+{
+ size_t err_pos;
+ char *uc_name = NULL;
+ int rc;
+#ifndef CURL_DISABLE_VERBOSE_STRINGS
+ const char *tld_errmsg = "<no msg>";
+#else
+ (void)data;
+#endif
+
+ /* Convert (and downcase) ACE-name back into locale's character set */
+ rc = idna_to_unicode_lzlz(ace_hostname, &uc_name, 0);
+ if(rc != IDNA_SUCCESS)
+ return FALSE;
+
+ rc = tld_check_lz(uc_name, &err_pos, NULL);
+#ifndef CURL_DISABLE_VERBOSE_STRINGS
+#ifdef HAVE_TLD_STRERROR
+ if(rc != TLD_SUCCESS)
+ tld_errmsg = tld_strerror((Tld_rc)rc);
+#endif
+ if(rc == TLD_INVALID)
+ infof(data, "WARNING: %s; pos %u = `%c'/0x%02X\n",
+ tld_errmsg, err_pos, uc_name[err_pos],
+ uc_name[err_pos] & 255);
+ else if(rc != TLD_SUCCESS)
+ infof(data, "WARNING: TLD check for %s failed; %s\n",
+ uc_name, tld_errmsg);
+#endif /* CURL_DISABLE_VERBOSE_STRINGS */
+ if(uc_name)
+ idn_free(uc_name);
+ if(rc != TLD_SUCCESS)
+ return FALSE;
+
+ return TRUE;
+}
+#endif
+
+/*
+ * Perform any necessary IDN conversion of hostname
+ */
+static void fix_hostname(struct SessionHandle *data,
+ struct connectdata *conn, struct hostname *host)
+{
+#ifndef USE_LIBIDN
+ (void)data;
+ (void)conn;
+#elif defined(CURL_DISABLE_VERBOSE_STRINGS)
+ (void)conn;
+#endif
+
+ /* set the name we use to display the host name */
+ host->dispname = host->name;
+ if(!is_ASCII_name(host->name)) {
+#ifdef USE_LIBIDN
+ /*************************************************************
+ * Check name for non-ASCII and convert hostname to ACE form.
+ *************************************************************/
+ if(stringprep_check_version(LIBIDN_REQUIRED_VERSION)) {
+ char *ace_hostname = NULL;
+ int rc = idna_to_ascii_lz(host->name, &ace_hostname, 0);
+ infof (data, "Input domain encoded as `%s'\n",
+ stringprep_locale_charset ());
+ if(rc != IDNA_SUCCESS)
+ infof(data, "Failed to convert %s to ACE; %s\n",
+ host->name, Curl_idn_strerror(conn,rc));
+ else {
+ /* tld_check_name() displays a warning if the host name contains
+ "illegal" characters for this TLD */
+ (void)tld_check_name(data, ace_hostname);
+
+ host->encalloc = ace_hostname;
+ /* change the name pointer to point to the encoded hostname */
+ host->name = host->encalloc;
+ }
+ }
+#elif defined(USE_WIN32_IDN)
+ /*************************************************************
+ * Check name for non-ASCII and convert hostname to ACE form.
+ *************************************************************/
+ char *ace_hostname = NULL;
+ int rc = curl_win32_idn_to_ascii(host->name, &ace_hostname);
+ if(rc == 0)
+ infof(data, "Failed to convert %s to ACE;\n",
+ host->name);
+ else {
+ host->encalloc = ace_hostname;
+ /* change the name pointer to point to the encoded hostname */
+ host->name = host->encalloc;
+ }
+#else
+ infof(data, "IDN support not present, can't parse Unicode domains\n");
+#endif
+ }
+}
+
+static void llist_dtor(void *user, void *element)
+{
+ (void)user;
+ (void)element;
+ /* Do nothing */
+}
+
+/*
+ * Allocate and initialize a new connectdata object.
+ */
+static struct connectdata *allocate_conn(struct SessionHandle *data)
+{
+ struct connectdata *conn = calloc(1, sizeof(struct connectdata));
+ if(!conn)
+ return NULL;
+
+ conn->handler = &Curl_handler_dummy; /* Be sure we have a handler defined
+ already from start to avoid NULL
+ situations and checks */
+
+ /* and we setup a few fields in case we end up actually using this struct */
+
+ conn->sock[FIRSTSOCKET] = CURL_SOCKET_BAD; /* no file descriptor */
+ conn->sock[SECONDARYSOCKET] = CURL_SOCKET_BAD; /* no file descriptor */
+ conn->connection_id = -1; /* no ID */
+ conn->port = -1; /* unknown at this point */
+
+ /* Default protocol-independent behavior doesn't support persistent
+ connections, so we set this to force-close. Protocols that support
+ this need to set this to FALSE in their "curl_do" functions. */
+ conn->bits.close = TRUE;
+
+ /* Store creation time to help future close decision making */
+ conn->created = Curl_tvnow();
+
+ conn->data = data; /* Setup the association between this connection
+ and the SessionHandle */
+
+ conn->proxytype = data->set.proxytype; /* type */
+
+#ifdef CURL_DISABLE_PROXY
+
+ conn->bits.proxy = FALSE;
+ conn->bits.httpproxy = FALSE;
+ conn->bits.proxy_user_passwd = FALSE;
+ conn->bits.tunnel_proxy = FALSE;
+
+#else /* CURL_DISABLE_PROXY */
+
+ /* note that these two proxy bits are now just on what looks to be
+ requested, they may be altered down the road */
+ conn->bits.proxy = (data->set.str[STRING_PROXY] &&
+ *data->set.str[STRING_PROXY])?TRUE:FALSE;
+ conn->bits.httpproxy = (conn->bits.proxy &&
+ (conn->proxytype == CURLPROXY_HTTP ||
+ conn->proxytype == CURLPROXY_HTTP_1_0))?TRUE:FALSE;
+ conn->bits.proxy_user_passwd =
+ (NULL != data->set.str[STRING_PROXYUSERNAME])?TRUE:FALSE;
+ conn->bits.tunnel_proxy = data->set.tunnel_thru_httpproxy;
+
+#endif /* CURL_DISABLE_PROXY */
+
+ conn->bits.user_passwd = (NULL != data->set.str[STRING_USERNAME])?TRUE:FALSE;
+ conn->bits.ftp_use_epsv = data->set.ftp_use_epsv;
+ conn->bits.ftp_use_eprt = data->set.ftp_use_eprt;
+
+ conn->verifypeer = data->set.ssl.verifypeer;
+ conn->verifyhost = data->set.ssl.verifyhost;
+
+ conn->ip_version = data->set.ipver;
+
+#if defined(USE_NTLM) && defined(NTLM_WB_ENABLED)
+ conn->ntlm_auth_hlpr_socket = CURL_SOCKET_BAD;
+ conn->ntlm_auth_hlpr_pid = 0;
+ conn->challenge_header = NULL;
+ conn->response_header = NULL;
+#endif
+
+ if(data->multi && Curl_multi_canPipeline(data->multi) &&
+ !conn->master_buffer) {
+ /* Allocate master_buffer to be used for pipelining */
+ conn->master_buffer = calloc(BUFSIZE, sizeof (char));
+ if(!conn->master_buffer)
+ goto error;
+ }
+
+ /* Initialize the pipeline lists */
+ conn->send_pipe = Curl_llist_alloc((curl_llist_dtor) llist_dtor);
+ conn->recv_pipe = Curl_llist_alloc((curl_llist_dtor) llist_dtor);
+ conn->pend_pipe = Curl_llist_alloc((curl_llist_dtor) llist_dtor);
+ conn->done_pipe = Curl_llist_alloc((curl_llist_dtor) llist_dtor);
+ if(!conn->send_pipe || !conn->recv_pipe || !conn->pend_pipe ||
+ !conn->done_pipe)
+ goto error;
+
+#if defined(HAVE_KRB4) || defined(HAVE_GSSAPI)
+ conn->data_prot = PROT_CLEAR;
+#endif
+
+ /* Store the local bind parameters that will be used for this connection */
+ if(data->set.str[STRING_DEVICE]) {
+ conn->localdev = strdup(data->set.str[STRING_DEVICE]);
+ if(!conn->localdev)
+ goto error;
+ }
+ conn->localportrange = data->set.localportrange;
+ conn->localport = data->set.localport;
+
+ /* the close socket stuff needs to be copied to the connection struct as
+ it may live on without (this specific) SessionHandle */
+ conn->fclosesocket = data->set.fclosesocket;
+ conn->closesocket_client = data->set.closesocket_client;
+
+ return conn;
+ error:
+
+ Curl_llist_destroy(conn->send_pipe, NULL);
+ Curl_llist_destroy(conn->recv_pipe, NULL);
+ Curl_llist_destroy(conn->pend_pipe, NULL);
+ Curl_llist_destroy(conn->done_pipe, NULL);
+
+ conn->send_pipe = NULL;
+ conn->recv_pipe = NULL;
+ conn->pend_pipe = NULL;
+ conn->done_pipe = NULL;
+
+ Curl_safefree(conn->master_buffer);
+ Curl_safefree(conn->localdev);
+ Curl_safefree(conn);
+ return NULL;
+}
+
+static CURLcode findprotocol(struct SessionHandle *data,
+ struct connectdata *conn,
+ const char *protostr)
+{
+ const struct Curl_handler * const *pp;
+ const struct Curl_handler *p;
+
+ /* Scan protocol handler table and match against 'protostr' to set a few
+ variables based on the URL. Now that the handler may be changed later
+ when the protocol specific setup function is called. */
+ for(pp = protocols; (p = *pp) != NULL; pp++) {
+ if(Curl_raw_equal(p->scheme, protostr)) {
+ /* Protocol found in table. Check if allowed */
+ if(!(data->set.allowed_protocols & p->protocol))
+ /* nope, get out */
+ break;
+
+ /* it is allowed for "normal" request, now do an extra check if this is
+ the result of a redirect */
+ if(data->state.this_is_a_follow &&
+ !(data->set.redir_protocols & p->protocol))
+ /* nope, get out */
+ break;
+
+ /* Perform setup complement if some. */
+ conn->handler = conn->given = p;
+
+ /* 'port' and 'remote_port' are set in setup_connection_internals() */
+ return CURLE_OK;
+ }
+ }
+
+
+ /* The protocol was not found in the table, but we don't have to assign it
+ to anything since it is already assigned to a dummy-struct in the
+ create_conn() function when the connectdata struct is allocated. */
+ failf(data, "Protocol %s not supported or disabled in " LIBCURL_NAME,
+ protostr);
+
+ return CURLE_UNSUPPORTED_PROTOCOL;
+}
+
+/*
+ * Parse URL and fill in the relevant members of the connection struct.
+ */
+static CURLcode parseurlandfillconn(struct SessionHandle *data,
+ struct connectdata *conn,
+ bool *prot_missing,
+ char *user,
+ char *passwd)
+{
+ char *at;
+ char *fragment;
+ char *path = data->state.path;
+ char *query;
+ int rc;
+ char protobuf[16];
+ const char *protop;
+ CURLcode result;
+
+ *prot_missing = FALSE;
+
+ /*************************************************************
+ * Parse the URL.
+ *
+ * We need to parse the url even when using the proxy, because we will need
+ * the hostname and port in case we are trying to SSL connect through the
+ * proxy -- and we don't know if we will need to use SSL until we parse the
+ * url ...
+ ************************************************************/
+ if((2 == sscanf(data->change.url, "%15[^:]:%[^\n]",
+ protobuf, path)) &&
+ Curl_raw_equal(protobuf, "file")) {
+ if(path[0] == '/' && path[1] == '/') {
+ /* Allow omitted hostname (e.g. file:/<path>). This is not strictly
+ * speaking a valid file: URL by RFC 1738, but treating file:/<path> as
+ * file://localhost/<path> is similar to how other schemes treat missing
+ * hostnames. See RFC 1808. */
+
+ /* This cannot be done with strcpy() in a portable manner, since the
+ memory areas overlap! */
+ memmove(path, path + 2, strlen(path + 2)+1);
+ }
+ /*
+ * we deal with file://<host>/<path> differently since it supports no
+ * hostname other than "localhost" and "127.0.0.1", which is unique among
+ * the URL protocols specified in RFC 1738
+ */
+ if(path[0] != '/') {
+ /* the URL included a host name, we ignore host names in file:// URLs
+ as the standards don't define what to do with them */
+ char *ptr=strchr(path, '/');
+ if(ptr) {
+ /* there was a slash present
+
+ RFC1738 (section 3.1, page 5) says:
+
+ The rest of the locator consists of data specific to the scheme,
+ and is known as the "url-path". It supplies the details of how the
+ specified resource can be accessed. Note that the "/" between the
+ host (or port) and the url-path is NOT part of the url-path.
+
+ As most agents use file://localhost/foo to get '/foo' although the
+ slash preceding foo is a separator and not a slash for the path,
+ a URL as file://localhost//foo must be valid as well, to refer to
+ the same file with an absolute path.
+ */
+
+ if(ptr[1] && ('/' == ptr[1]))
+ /* if there was two slashes, we skip the first one as that is then
+ used truly as a separator */
+ ptr++;
+
+ /* This cannot be made with strcpy, as the memory chunks overlap! */
+ memmove(path, ptr, strlen(ptr)+1);
+ }
+ }
+
+ protop = "file"; /* protocol string */
+ }
+ else {
+ /* clear path */
+ path[0]=0;
+
+ if(2 > sscanf(data->change.url,
+ "%15[^\n:]://%[^\n/?]%[^\n]",
+ protobuf,
+ conn->host.name, path)) {
+
+ /*
+ * The URL was badly formatted, let's try the browser-style _without_
+ * protocol specified like 'http://'.
+ */
+ rc = sscanf(data->change.url, "%[^\n/?]%[^\n]", conn->host.name, path);
+ if(1 > rc) {
+ /*
+ * We couldn't even get this format.
+ * djgpp 2.04 has a sscanf() bug where 'conn->host.name' is
+ * assigned, but the return value is EOF!
+ */
+#if defined(__DJGPP__) && (DJGPP_MINOR == 4)
+ if(!(rc == -1 && *conn->host.name))
+#endif
+ {
+ failf(data, "<url> malformed");
+ return CURLE_URL_MALFORMAT;
+ }
+ }
+
+ /*
+ * Since there was no protocol part specified, we guess what protocol it
+ * is based on the first letters of the server name.
+ */
+
+ /* Note: if you add a new protocol, please update the list in
+ * lib/curl_version.c too! */
+
+ if(checkprefix("FTP.", conn->host.name))
+ protop = "ftp";
+ else if(checkprefix("DICT.", conn->host.name))
+ protop = "DICT";
+ else if(checkprefix("LDAP.", conn->host.name))
+ protop = "LDAP";
+ else if(checkprefix("IMAP.", conn->host.name))
+ protop = "IMAP";
+ else {
+ protop = "http";
+ }
+
+ *prot_missing = TRUE; /* not given in URL */
+ }
+ else
+ protop = protobuf;
+ }
+
+ /* We search for '?' in the host name (but only on the right side of a
+ * @-letter to allow ?-letters in username and password) to handle things
+ * like http://example.com?param= (notice the missing '/').
+ */
+ at = strchr(conn->host.name, '@');
+ if(at)
+ query = strchr(at+1, '?');
+ else
+ query = strchr(conn->host.name, '?');
+
+ if(query) {
+ /* We must insert a slash before the '?'-letter in the URL. If the URL had
+ a slash after the '?', that is where the path currently begins and the
+ '?string' is still part of the host name.
+
+ We must move the trailing part from the host name and put it first in
+ the path. And have it all prefixed with a slash.
+ */
+
+ size_t hostlen = strlen(query);
+ size_t pathlen = strlen(path);
+
+ /* move the existing path plus the zero byte forward, to make room for
+ the host-name part */
+ memmove(path+hostlen+1, path, pathlen+1);
+
+ /* now copy the trailing host part in front of the existing path */
+ memcpy(path+1, query, hostlen);
+
+ path[0]='/'; /* prepend the missing slash */
+
+ *query=0; /* now cut off the hostname at the ? */
+ }
+ else if(!path[0]) {
+ /* if there's no path set, use a single slash */
+ strcpy(path, "/");
+ }
+
+ /* If the URL is malformatted (missing a '/' after hostname before path) we
+ * insert a slash here. The only letter except '/' we accept to start a path
+ * is '?'.
+ */
+ if(path[0] == '?') {
+ /* We need this function to deal with overlapping memory areas. We know
+ that the memory area 'path' points to is 'urllen' bytes big and that
+ is bigger than the path. Use +1 to move the zero byte too. */
+ memmove(&path[1], path, strlen(path)+1);
+ path[0] = '/';
+ }
+
+ /*************************************************************
+ * Parse a user name and password in the URL and strip it out
+ * of the host name
+ *************************************************************/
+ result = parse_url_userpass(data, conn, user, passwd);
+ if(result != CURLE_OK)
+ return result;
+
+ if(conn->host.name[0] == '[') {
+ /* This looks like an IPv6 address literal. See if there is an address
+ scope. */
+ char *percent = strstr (conn->host.name, "%25");
+ if(percent) {
+ char *endp;
+ unsigned long scope = strtoul (percent + 3, &endp, 10);
+ if(*endp == ']') {
+ /* The address scope was well formed. Knock it out of the
+ hostname. */
+ memmove(percent, endp, strlen(endp)+1);
+ if(!data->state.this_is_a_follow)
+ /* Don't honour a scope given in a Location: header */
+ conn->scope = (unsigned int)scope;
+ }
+ else
+ infof(data, "Invalid IPv6 address format\n");
+ }
+ }
+
+ if(data->set.scope)
+ /* Override any scope that was set above. */
+ conn->scope = data->set.scope;
+
+ /* Remove the fragment part of the path. Per RFC 2396, this is always the
+ last part of the URI. We are looking for the first '#' so that we deal
+ gracefully with non conformant URI such as http://example.com#foo#bar. */
+ fragment = strchr(path, '#');
+ if(fragment) {
+ *fragment = 0;
+
+ /* we know the path part ended with a fragment, so we know the full URL
+ string does too and we need to cut it off from there so it isn't used
+ over proxy */
+ fragment = strchr(data->change.url, '#');
+ if(fragment)
+ *fragment = 0;
+ }
+
+ /*
+ * So if the URL was A://B/C#D,
+ * protop is A
+ * conn->host.name is B
+ * data->state.path is /C
+ */
+
+ return findprotocol(data, conn, protop);
+}
+
+/*
+ * If we're doing a resumed transfer, we need to setup our stuff
+ * properly.
+ */
+static CURLcode setup_range(struct SessionHandle *data)
+{
+ struct UrlState *s = &data->state;
+ s->resume_from = data->set.set_resume_from;
+ if(s->resume_from || data->set.str[STRING_SET_RANGE]) {
+ if(s->rangestringalloc)
+ free(s->range);
+
+ if(s->resume_from)
+ s->range = aprintf("%" FORMAT_OFF_TU "-", s->resume_from);
+ else
+ s->range = strdup(data->set.str[STRING_SET_RANGE]);
+
+ s->rangestringalloc = (s->range)?TRUE:FALSE;
+
+ if(!s->range)
+ return CURLE_OUT_OF_MEMORY;
+
+ /* tell ourselves to fetch this range */
+ s->use_range = TRUE; /* enable range download */
+ }
+ else
+ s->use_range = FALSE; /* disable range download */
+
+ return CURLE_OK;
+}
+
+
+/***************************************************************
+* Setup connection internals specific to the requested protocol.
+* This MUST get called after proxy magic has been figured out.
+***************************************************************/
+static CURLcode setup_connection_internals(struct connectdata *conn)
+{
+ const struct Curl_handler * p;
+ CURLcode result;
+
+ conn->socktype = SOCK_STREAM; /* most of them are TCP streams */
+
+ /* Scan protocol handler table. */
+
+ /* Perform setup complement if some. */
+ p = conn->handler;
+
+ if(p->setup_connection) {
+ result = (*p->setup_connection)(conn);
+
+ if(result != CURLE_OK)
+ return result;
+
+ p = conn->handler; /* May have changed. */
+ }
+
+ if(conn->port < 0)
+ /* we check for -1 here since if proxy was detected already, this
+ was very likely already set to the proxy port */
+ conn->port = p->defport;
+ conn->remote_port = (unsigned short)conn->given->defport;
+
+ return CURLE_OK;
+}
+
+#ifndef CURL_DISABLE_PROXY
+/****************************************************************
+* Checks if the host is in the noproxy list. returns true if it matches
+* and therefore the proxy should NOT be used.
+****************************************************************/
+static bool check_noproxy(const char* name, const char* no_proxy)
+{
+ /* no_proxy=domain1.dom,host.domain2.dom
+ * (a comma-separated list of hosts which should
+ * not be proxied, or an asterisk to override
+ * all proxy variables)
+ */
+ size_t tok_start;
+ size_t tok_end;
+ const char* separator = ", ";
+ size_t no_proxy_len;
+ size_t namelen;
+ char *endptr;
+
+ if(no_proxy && no_proxy[0]) {
+ if(Curl_raw_equal("*", no_proxy)) {
+ return TRUE;
+ }
+
+ /* NO_PROXY was specified and it wasn't just an asterisk */
+
+ no_proxy_len = strlen(no_proxy);
+ endptr = strchr(name, ':');
+ if(endptr)
+ namelen = endptr - name;
+ else
+ namelen = strlen(name);
+
+ for(tok_start = 0; tok_start < no_proxy_len; tok_start = tok_end + 1) {
+ while(tok_start < no_proxy_len &&
+ strchr(separator, no_proxy[tok_start]) != NULL) {
+ /* Look for the beginning of the token. */
+ ++tok_start;
+ }
+
+ if(tok_start == no_proxy_len)
+ break; /* It was all trailing separator chars, no more tokens. */
+
+ for(tok_end = tok_start; tok_end < no_proxy_len &&
+ strchr(separator, no_proxy[tok_end]) == NULL; ++tok_end)
+ /* Look for the end of the token. */
+ ;
+
+ /* To match previous behaviour, where it was necessary to specify
+ * ".local.com" to prevent matching "notlocal.com", we will leave
+ * the '.' off.
+ */
+ if(no_proxy[tok_start] == '.')
+ ++tok_start;
+
+ if((tok_end - tok_start) <= namelen) {
+ /* Match the last part of the name to the domain we are checking. */
+ const char *checkn = name + namelen - (tok_end - tok_start);
+ if(Curl_raw_nequal(no_proxy + tok_start, checkn,
+ tok_end - tok_start)) {
+ if((tok_end - tok_start) == namelen || *(checkn - 1) == '.') {
+ /* We either have an exact match, or the previous character is a .
+ * so it is within the same domain, so no proxy for this host.
+ */
+ return TRUE;
+ }
+ }
+ } /* if((tok_end - tok_start) <= namelen) */
+ } /* for(tok_start = 0; tok_start < no_proxy_len;
+ tok_start = tok_end + 1) */
+ } /* NO_PROXY was specified and it wasn't just an asterisk */
+
+ return FALSE;
+}
+
+/****************************************************************
+* Detect what (if any) proxy to use. Remember that this selects a host
+* name and is not limited to HTTP proxies only.
+* The returned pointer must be freed by the caller (unless NULL)
+****************************************************************/
+static char *detect_proxy(struct connectdata *conn)
+{
+ char *proxy = NULL;
+
+#ifndef CURL_DISABLE_HTTP
+ /* If proxy was not specified, we check for default proxy environment
+ * variables, to enable i.e Lynx compliance:
+ *
+ * http_proxy=http://some.server.dom:port/
+ * https_proxy=http://some.server.dom:port/
+ * ftp_proxy=http://some.server.dom:port/
+ * no_proxy=domain1.dom,host.domain2.dom
+ * (a comma-separated list of hosts which should
+ * not be proxied, or an asterisk to override
+ * all proxy variables)
+ * all_proxy=http://some.server.dom:port/
+ * (seems to exist for the CERN www lib. Probably
+ * the first to check for.)
+ *
+ * For compatibility, the all-uppercase versions of these variables are
+ * checked if the lowercase versions don't exist.
+ */
+ char *no_proxy=NULL;
+ char proxy_env[128];
+
+ no_proxy=curl_getenv("no_proxy");
+ if(!no_proxy)
+ no_proxy=curl_getenv("NO_PROXY");
+
+ if(!check_noproxy(conn->host.name, no_proxy)) {
+ /* It was not listed as without proxy */
+ const char *protop = conn->handler->scheme;
+ char *envp = proxy_env;
+ char *prox;
+
+ /* Now, build <protocol>_proxy and check for such a one to use */
+ while(*protop)
+ *envp++ = (char)tolower((int)*protop++);
+
+ /* append _proxy */
+ strcpy(envp, "_proxy");
+
+ /* read the protocol proxy: */
+ prox=curl_getenv(proxy_env);
+
+ /*
+ * We don't try the uppercase version of HTTP_PROXY because of
+ * security reasons:
+ *
+ * When curl is used in a webserver application
+ * environment (cgi or php), this environment variable can
+ * be controlled by the web server user by setting the
+ * http header 'Proxy:' to some value.
+ *
+ * This can cause 'internal' http/ftp requests to be
+ * arbitrarily redirected by any external attacker.
+ */
+ if(!prox && !Curl_raw_equal("http_proxy", proxy_env)) {
+ /* There was no lowercase variable, try the uppercase version: */
+ Curl_strntoupper(proxy_env, proxy_env, sizeof(proxy_env));
+ prox=curl_getenv(proxy_env);
+ }
+
+ if(prox && *prox) { /* don't count "" strings */
+ proxy = prox; /* use this */
+ }
+ else {
+ proxy = curl_getenv("all_proxy"); /* default proxy to use */
+ if(!proxy)
+ proxy=curl_getenv("ALL_PROXY");
+ }
+ } /* if(!check_noproxy(conn->host.name, no_proxy)) - it wasn't specified
+ non-proxy */
+ if(no_proxy)
+ free(no_proxy);
+
+#else /* !CURL_DISABLE_HTTP */
+
+ (void)conn;
+#endif /* CURL_DISABLE_HTTP */
+
+ return proxy;
+}
+
+/*
+ * If this is supposed to use a proxy, we need to figure out the proxy
+ * host name, so that we can re-use an existing connection
+ * that may exist registered to the same proxy host.
+ * proxy will be freed before this function returns.
+ */
+static CURLcode parse_proxy(struct SessionHandle *data,
+ struct connectdata *conn, char *proxy)
+{
+ char *prox_portno;
+ char *endofprot;
+
+ /* We use 'proxyptr' to point to the proxy name from now on... */
+ char *proxyptr;
+ char *portptr;
+ char *atsign;
+
+ /* We do the proxy host string parsing here. We want the host name and the
+ * port name. Accept a protocol:// prefix
+ */
+
+ /* Parse the protocol part if present */
+ endofprot = strstr(proxy, "://");
+ if(endofprot) {
+ proxyptr = endofprot+3;
+ if(checkprefix("socks5h", proxy))
+ conn->proxytype = CURLPROXY_SOCKS5_HOSTNAME;
+ else if(checkprefix("socks5", proxy))
+ conn->proxytype = CURLPROXY_SOCKS5;
+ else if(checkprefix("socks4a", proxy))
+ conn->proxytype = CURLPROXY_SOCKS4A;
+ else if(checkprefix("socks4", proxy) || checkprefix("socks", proxy))
+ conn->proxytype = CURLPROXY_SOCKS4;
+ /* Any other xxx:// : change to http proxy */
+ }
+ else
+ proxyptr = proxy; /* No xxx:// head: It's a HTTP proxy */
+
+ /* Is there a username and password given in this proxy url? */
+ atsign = strchr(proxyptr, '@');
+ if(atsign) {
+ char proxyuser[MAX_CURL_USER_LENGTH];
+ char proxypasswd[MAX_CURL_PASSWORD_LENGTH];
+ proxypasswd[0] = 0;
+
+ if(1 <= sscanf(proxyptr,
+ "%" MAX_CURL_USER_LENGTH_TXT"[^:@]:"
+ "%" MAX_CURL_PASSWORD_LENGTH_TXT "[^@]",
+ proxyuser, proxypasswd)) {
+ CURLcode res = CURLE_OK;
+
+ /* found user and password, rip them out. note that we are
+ unescaping them, as there is otherwise no way to have a
+ username or password with reserved characters like ':' in
+ them. */
+ Curl_safefree(conn->proxyuser);
+ conn->proxyuser = curl_easy_unescape(data, proxyuser, 0, NULL);
+
+ if(!conn->proxyuser)
+ res = CURLE_OUT_OF_MEMORY;
+ else {
+ Curl_safefree(conn->proxypasswd);
+ conn->proxypasswd = curl_easy_unescape(data, proxypasswd, 0, NULL);
+
+ if(!conn->proxypasswd)
+ res = CURLE_OUT_OF_MEMORY;
+ }
+
+ if(CURLE_OK == res) {
+ conn->bits.proxy_user_passwd = TRUE; /* enable it */
+ atsign++; /* the right side of the @-letter */
+
+ if(atsign)
+ proxyptr = atsign; /* now use this instead */
+ else
+ res = CURLE_OUT_OF_MEMORY;
+ }
+
+ if(res)
+ return res;
+ }
+ }
+
+ /* start scanning for port number at this point */
+ portptr = proxyptr;
+
+ /* detect and extract RFC2732-style IPv6-addresses */
+ if(*proxyptr == '[') {
+ char *ptr = ++proxyptr; /* advance beyond the initial bracket */
+ while(*ptr && (ISXDIGIT(*ptr) || (*ptr == ':') || (*ptr == '%') ||
+ (*ptr == '.')))
+ ptr++;
+ if(*ptr == ']')
+ /* yeps, it ended nicely with a bracket as well */
+ *ptr++ = 0;
+ else
+ infof(data, "Invalid IPv6 address format\n");
+ portptr = ptr;
+ /* Note that if this didn't end with a bracket, we still advanced the
+ * proxyptr first, but I can't see anything wrong with that as no host
+ * name nor a numeric can legally start with a bracket.
+ */
+ }
+
+ /* Get port number off proxy.server.com:1080 */
+ prox_portno = strchr(portptr, ':');
+ if(prox_portno) {
+ *prox_portno = 0x0; /* cut off number from host name */
+ prox_portno ++;
+ /* now set the local port number */
+ conn->port = strtol(prox_portno, NULL, 10);
+ }
+ else {
+ if(proxyptr[0]=='/')
+ /* If the first character in the proxy string is a slash, fail
+ immediately. The following code will otherwise clear the string which
+ will lead to code running as if no proxy was set! */
+ return CURLE_COULDNT_RESOLVE_PROXY;
+
+ /* without a port number after the host name, some people seem to use
+ a slash so we strip everything from the first slash */
+ atsign = strchr(proxyptr, '/');
+ if(atsign)
+ *atsign = 0x0; /* cut off path part from host name */
+
+ if(data->set.proxyport)
+ /* None given in the proxy string, then get the default one if it is
+ given */
+ conn->port = data->set.proxyport;
+ }
+
+ /* now, clone the cleaned proxy host name */
+ conn->proxy.rawalloc = strdup(proxyptr);
+ conn->proxy.name = conn->proxy.rawalloc;
+
+ if(!conn->proxy.rawalloc)
+ return CURLE_OUT_OF_MEMORY;
+
+ return CURLE_OK;
+}
+
+/*
+ * Extract the user and password from the authentication string
+ */
+static CURLcode parse_proxy_auth(struct SessionHandle *data,
+ struct connectdata *conn)
+{
+ char proxyuser[MAX_CURL_USER_LENGTH]="";
+ char proxypasswd[MAX_CURL_PASSWORD_LENGTH]="";
+
+ if(data->set.str[STRING_PROXYUSERNAME] != NULL) {
+ strncpy(proxyuser, data->set.str[STRING_PROXYUSERNAME],
+ MAX_CURL_USER_LENGTH);
+ proxyuser[MAX_CURL_USER_LENGTH-1] = '\0'; /*To be on safe side*/
+ }
+ if(data->set.str[STRING_PROXYPASSWORD] != NULL) {
+ strncpy(proxypasswd, data->set.str[STRING_PROXYPASSWORD],
+ MAX_CURL_PASSWORD_LENGTH);
+ proxypasswd[MAX_CURL_PASSWORD_LENGTH-1] = '\0'; /*To be on safe side*/
+ }
+
+ conn->proxyuser = curl_easy_unescape(data, proxyuser, 0, NULL);
+ if(!conn->proxyuser)
+ return CURLE_OUT_OF_MEMORY;
+
+ conn->proxypasswd = curl_easy_unescape(data, proxypasswd, 0, NULL);
+ if(!conn->proxypasswd)
+ return CURLE_OUT_OF_MEMORY;
+
+ return CURLE_OK;
+}
+#endif /* CURL_DISABLE_PROXY */
+
+/*
+ *
+ * Parse a user name and password in the URL and strip it out of the host name
+ *
+ * Inputs: data->set.use_netrc (CURLOPT_NETRC)
+ * conn->host.name
+ *
+ * Outputs: (almost :- all currently undefined)
+ * conn->bits.user_passwd - non-zero if non-default passwords exist
+ * user - non-zero length if defined
+ * passwd - ditto
+ * conn->host.name - remove user name and password
+ */
+static CURLcode parse_url_userpass(struct SessionHandle *data,
+ struct connectdata *conn,
+ char *user, char *passwd)
+{
+ /* At this point, we're hoping all the other special cases have
+ * been taken care of, so conn->host.name is at most
+ * [user[:password]]@]hostname
+ *
+ * We need somewhere to put the embedded details, so do that first.
+ */
+
+ char *ptr=strchr(conn->host.name, '@');
+ char *userpass = conn->host.name;
+
+ user[0] =0; /* to make everything well-defined */
+ passwd[0]=0;
+
+ /* We will now try to extract the
+ * possible user+password pair in a string like:
+ * ftp://user:password@ftp.my.site:8021/README */
+ if(ptr != NULL) {
+ /* there's a user+password given here, to the left of the @ */
+
+ conn->host.name = ++ptr;
+
+ /* So the hostname is sane. Only bother interpreting the
+ * results if we could care. It could still be wasted
+ * work because it might be overtaken by the programmatically
+ * set user/passwd, but doing that first adds more cases here :-(
+ */
+
+ conn->bits.userpwd_in_url = TRUE;
+ if(data->set.use_netrc != CURL_NETRC_REQUIRED) {
+ /* We could use the one in the URL */
+
+ conn->bits.user_passwd = TRUE; /* enable user+password */
+
+ if(*userpass != ':') {
+ /* the name is given, get user+password */
+ sscanf(userpass, "%" MAX_CURL_USER_LENGTH_TXT "[^:@]:"
+ "%" MAX_CURL_PASSWORD_LENGTH_TXT "[^@]",
+ user, passwd);
+ }
+ else
+ /* no name given, get the password only */
+ sscanf(userpass, ":%" MAX_CURL_PASSWORD_LENGTH_TXT "[^@]", passwd);
+
+ if(user[0]) {
+ char *newname=curl_easy_unescape(data, user, 0, NULL);
+ if(!newname)
+ return CURLE_OUT_OF_MEMORY;
+ if(strlen(newname) < MAX_CURL_USER_LENGTH)
+ strcpy(user, newname);
+
+ /* if the new name is longer than accepted, then just use
+ the unconverted name, it'll be wrong but what the heck */
+ free(newname);
+ }
+ if(passwd[0]) {
+ /* we have a password found in the URL, decode it! */
+ char *newpasswd=curl_easy_unescape(data, passwd, 0, NULL);
+ if(!newpasswd)
+ return CURLE_OUT_OF_MEMORY;
+ if(strlen(newpasswd) < MAX_CURL_PASSWORD_LENGTH)
+ strcpy(passwd, newpasswd);
+
+ free(newpasswd);
+ }
+ }
+ }
+ return CURLE_OK;
+}
+
+/*************************************************************
+ * Figure out the remote port number and fix it in the URL
+ *
+ * No matter if we use a proxy or not, we have to figure out the remote
+ * port number of various reasons.
+ *
+ * To be able to detect port number flawlessly, we must not confuse them
+ * IPv6-specified addresses in the [0::1] style. (RFC2732)
+ *
+ * The conn->host.name is currently [user:passwd@]host[:port] where host
+ * could be a hostname, IPv4 address or IPv6 address.
+ *
+ * The port number embedded in the URL is replaced, if necessary.
+ *************************************************************/
+static CURLcode parse_remote_port(struct SessionHandle *data,
+ struct connectdata *conn)
+{
+ char *portptr;
+ char endbracket;
+
+ /* Note that at this point, the IPv6 address cannot contain any scope
+ suffix as that has already been removed in the parseurlandfillconn()
+ function */
+ if((1 == sscanf(conn->host.name, "[%*45[0123456789abcdefABCDEF:.]%c",
+ &endbracket)) &&
+ (']' == endbracket)) {
+ /* this is a RFC2732-style specified IP-address */
+ conn->bits.ipv6_ip = TRUE;
+
+ conn->host.name++; /* skip over the starting bracket */
+ portptr = strchr(conn->host.name, ']');
+ if(portptr) {
+ *portptr++ = '\0'; /* zero terminate, killing the bracket */
+ if(':' != *portptr)
+ portptr = NULL; /* no port number available */
+ }
+ }
+ else {
+#ifdef ENABLE_IPV6
+ struct in6_addr in6;
+ if(Curl_inet_pton(AF_INET6, conn->host.name, &in6) > 0) {
+ /* This is a numerical IPv6 address, meaning this is a wrongly formatted
+ URL */
+ failf(data, "IPv6 numerical address used in URL without brackets");
+ return CURLE_URL_MALFORMAT;
+ }
+#endif
+
+ portptr = strrchr(conn->host.name, ':');
+ }
+
+ if(data->set.use_port && data->state.allow_port) {
+ /* if set, we use this and ignore the port possibly given in the URL */
+ conn->remote_port = (unsigned short)data->set.use_port;
+ if(portptr)
+ *portptr = '\0'; /* cut off the name there anyway - if there was a port
+ number - since the port number is to be ignored! */
+ if(conn->bits.httpproxy) {
+ /* we need to create new URL with the new port number */
+ char *url;
+ char type[12]="";
+
+ if(conn->bits.type_set)
+ snprintf(type, sizeof(type), ";type=%c",
+ data->set.prefer_ascii?'A':
+ (data->set.ftp_list_only?'D':'I'));
+
+ /*
+ * This synthesized URL isn't always right--suffixes like ;type=A are
+ * stripped off. It would be better to work directly from the original
+ * URL and simply replace the port part of it.
+ */
+ url = aprintf("%s://%s%s%s:%hu%s%s%s", conn->given->scheme,
+ conn->bits.ipv6_ip?"[":"", conn->host.name,
+ conn->bits.ipv6_ip?"]":"", conn->remote_port,
+ data->state.slash_removed?"/":"", data->state.path,
+ type);
+ if(!url)
+ return CURLE_OUT_OF_MEMORY;
+
+ if(data->change.url_alloc) {
+ Curl_safefree(data->change.url);
+ data->change.url_alloc = FALSE;
+ }
+
+ data->change.url = url;
+ data->change.url_alloc = TRUE;
+ }
+ }
+ else if(portptr) {
+ /* no CURLOPT_PORT given, extract the one from the URL */
+
+ char *rest;
+ unsigned long port;
+
+ port=strtoul(portptr+1, &rest, 10); /* Port number must be decimal */
+
+ if(rest != (portptr+1) && *rest == '\0') {
+ /* The colon really did have only digits after it,
+ * so it is either a port number or a mistake */
+
+ if(port > 0xffff) { /* Single unix standard says port numbers are
+ * 16 bits long */
+ failf(data, "Port number too large: %lu", port);
+ return CURLE_URL_MALFORMAT;
+ }
+
+ *portptr = '\0'; /* cut off the name there */
+ conn->remote_port = curlx_ultous(port);
+ }
+ else if(!port)
+ /* Browser behavior adaptation. If there's a colon with no digits after,
+ just cut off the name there which makes us ignore the colon and just
+ use the default port. Firefox and Chrome both do that. */
+ *portptr = '\0';
+ }
+ return CURLE_OK;
+}
+
+/*
+ * Override a user name and password from the URL with that in the
+ * CURLOPT_USERPWD option or a .netrc file, if applicable.
+ */
+static void override_userpass(struct SessionHandle *data,
+ struct connectdata *conn,
+ char *user, char *passwd)
+{
+ if(data->set.str[STRING_USERNAME] != NULL) {
+ strncpy(user, data->set.str[STRING_USERNAME], MAX_CURL_USER_LENGTH);
+ user[MAX_CURL_USER_LENGTH-1] = '\0'; /*To be on safe side*/
+ }
+ if(data->set.str[STRING_PASSWORD] != NULL) {
+ strncpy(passwd, data->set.str[STRING_PASSWORD], MAX_CURL_PASSWORD_LENGTH);
+ passwd[MAX_CURL_PASSWORD_LENGTH-1] = '\0'; /*To be on safe side*/
+ }
+
+ conn->bits.netrc = FALSE;
+ if(data->set.use_netrc != CURL_NETRC_IGNORED) {
+ if(Curl_parsenetrc(conn->host.name,
+ user, passwd,
+ data->set.str[STRING_NETRC_FILE])) {
+ infof(data, "Couldn't find host %s in the "
+ DOT_CHAR "netrc file; using defaults\n",
+ conn->host.name);
+ }
+ else {
+ /* set bits.netrc TRUE to remember that we got the name from a .netrc
+ file, so that it is safe to use even if we followed a Location: to a
+ different host or similar. */
+ conn->bits.netrc = TRUE;
+
+ conn->bits.user_passwd = TRUE; /* enable user+password */
+ }
+ }
+}
+
+/*
+ * Set password so it's available in the connection.
+ */
+static CURLcode set_userpass(struct connectdata *conn,
+ const char *user, const char *passwd)
+{
+ /* If our protocol needs a password and we have none, use the defaults */
+ if((conn->handler->flags & PROTOPT_NEEDSPWD) &&
+ !conn->bits.user_passwd) {
+
+ conn->user = strdup(CURL_DEFAULT_USER);
+ if(conn->user)
+ conn->passwd = strdup(CURL_DEFAULT_PASSWORD);
+ else
+ conn->passwd = NULL;
+ /* This is the default password, so DON'T set conn->bits.user_passwd */
+ }
+ else {
+ /* store user + password, zero-length if not set */
+ conn->user = strdup(user);
+ if(conn->user)
+ conn->passwd = strdup(passwd);
+ else
+ conn->passwd = NULL;
+ }
+ if(!conn->user || !conn->passwd)
+ return CURLE_OUT_OF_MEMORY;
+
+ return CURLE_OK;
+}
+
+/*************************************************************
+ * Resolve the address of the server or proxy
+ *************************************************************/
+static CURLcode resolve_server(struct SessionHandle *data,
+ struct connectdata *conn,
+ bool *async)
+{
+ CURLcode result=CURLE_OK;
+ long timeout_ms = Curl_timeleft(data, NULL, TRUE);
+
+ /*************************************************************
+ * Resolve the name of the server or proxy
+ *************************************************************/
+ if(conn->bits.reuse)
+ /* We're reusing the connection - no need to resolve anything, and
+ fix_hostname() was called already in create_conn() for the re-use
+ case. */
+ *async = FALSE;
+
+ else {
+ /* this is a fresh connect */
+ int rc;
+ struct Curl_dns_entry *hostaddr;
+
+ /* set a pointer to the hostname we display */
+ fix_hostname(data, conn, &conn->host);
+
+ if(!conn->proxy.name || !*conn->proxy.name) {
+ /* If not connecting via a proxy, extract the port from the URL, if it is
+ * there, thus overriding any defaults that might have been set above. */
+ conn->port = conn->remote_port; /* it is the same port */
+
+ /* Resolve target host right on */
+ rc = Curl_resolv_timeout(conn, conn->host.name, (int)conn->port,
+ &hostaddr, timeout_ms);
+ if(rc == CURLRESOLV_PENDING)
+ *async = TRUE;
+
+ else if(rc == CURLRESOLV_TIMEDOUT)
+ result = CURLE_OPERATION_TIMEDOUT;
+
+ else if(!hostaddr) {
+ failf(data, "Couldn't resolve host '%s'", conn->host.dispname);
+ result = CURLE_COULDNT_RESOLVE_HOST;
+ /* don't return yet, we need to clean up the timeout first */
+ }
+ }
+ else {
+ /* This is a proxy that hasn't been resolved yet. */
+
+ /* IDN-fix the proxy name */
+ fix_hostname(data, conn, &conn->proxy);
+
+ /* resolve proxy */
+ rc = Curl_resolv_timeout(conn, conn->proxy.name, (int)conn->port,
+ &hostaddr, timeout_ms);
+
+ if(rc == CURLRESOLV_PENDING)
+ *async = TRUE;
+
+ else if(rc == CURLRESOLV_TIMEDOUT)
+ result = CURLE_OPERATION_TIMEDOUT;
+
+ else if(!hostaddr) {
+ failf(data, "Couldn't resolve proxy '%s'", conn->proxy.dispname);
+ result = CURLE_COULDNT_RESOLVE_PROXY;
+ /* don't return yet, we need to clean up the timeout first */
+ }
+ }
+ DEBUGASSERT(conn->dns_entry == NULL);
+ conn->dns_entry = hostaddr;
+ }
+
+ return result;
+}
+
+/*
+ * Cleanup the connection just allocated before we can move along and use the
+ * previously existing one. All relevant data is copied over and old_conn is
+ * ready for freeing once this function returns.
+ */
+static void reuse_conn(struct connectdata *old_conn,
+ struct connectdata *conn)
+{
+ if(old_conn->proxy.rawalloc)
+ free(old_conn->proxy.rawalloc);
+
+ /* free the SSL config struct from this connection struct as this was
+ allocated in vain and is targeted for destruction */
+ Curl_free_ssl_config(&old_conn->ssl_config);
+
+ conn->data = old_conn->data;
+
+ /* get the user+password information from the old_conn struct since it may
+ * be new for this request even when we re-use an existing connection */
+ conn->bits.user_passwd = old_conn->bits.user_passwd;
+ if(conn->bits.user_passwd) {
+ /* use the new user name and password though */
+ Curl_safefree(conn->user);
+ Curl_safefree(conn->passwd);
+ conn->user = old_conn->user;
+ conn->passwd = old_conn->passwd;
+ old_conn->user = NULL;
+ old_conn->passwd = NULL;
+ }
+
+ conn->bits.proxy_user_passwd = old_conn->bits.proxy_user_passwd;
+ if(conn->bits.proxy_user_passwd) {
+ /* use the new proxy user name and proxy password though */
+ Curl_safefree(conn->proxyuser);
+ Curl_safefree(conn->proxypasswd);
+ conn->proxyuser = old_conn->proxyuser;
+ conn->proxypasswd = old_conn->proxypasswd;
+ old_conn->proxyuser = NULL;
+ old_conn->proxypasswd = NULL;
+ }
+
+ /* host can change, when doing keepalive with a proxy or if the case is
+ different this time etc */
+ Curl_safefree(conn->host.rawalloc);
+ conn->host=old_conn->host;
+
+ /* persist connection info in session handle */
+ Curl_persistconninfo(conn);
+
+ /* re-use init */
+ conn->bits.reuse = TRUE; /* yes, we're re-using here */
+
+ Curl_safefree(old_conn->user);
+ Curl_safefree(old_conn->passwd);
+ Curl_safefree(old_conn->proxyuser);
+ Curl_safefree(old_conn->proxypasswd);
+ Curl_safefree(old_conn->localdev);
+
+ Curl_llist_destroy(old_conn->send_pipe, NULL);
+ Curl_llist_destroy(old_conn->recv_pipe, NULL);
+ Curl_llist_destroy(old_conn->pend_pipe, NULL);
+ Curl_llist_destroy(old_conn->done_pipe, NULL);
+
+ old_conn->send_pipe = NULL;
+ old_conn->recv_pipe = NULL;
+ old_conn->pend_pipe = NULL;
+ old_conn->done_pipe = NULL;
+
+ Curl_safefree(old_conn->master_buffer);
+}
+
+/**
+ * create_conn() sets up a new connectdata struct, or re-uses an already
+ * existing one, and resolves host name.
+ *
+ * if this function returns CURLE_OK and *async is set to TRUE, the resolve
+ * response will be coming asynchronously. If *async is FALSE, the name is
+ * already resolved.
+ *
+ * @param data The sessionhandle pointer
+ * @param in_connect is set to the next connection data pointer
+ * @param async is set TRUE when an async DNS resolution is pending
+ * @see Curl_setup_conn()
+ *
+ * *NOTE* this function assigns the conn->data pointer!
+ */
+
+static CURLcode create_conn(struct SessionHandle *data,
+ struct connectdata **in_connect,
+ bool *async)
+{
+ CURLcode result=CURLE_OK;
+ struct connectdata *conn;
+ struct connectdata *conn_temp = NULL;
+ size_t urllen;
+ char user[MAX_CURL_USER_LENGTH];
+ char passwd[MAX_CURL_PASSWORD_LENGTH];
+ bool reuse;
+ char *proxy = NULL;
+ bool prot_missing = FALSE;
+
+ *async = FALSE;
+
+ /*************************************************************
+ * Check input data
+ *************************************************************/
+
+ if(!data->change.url)
+ return CURLE_URL_MALFORMAT;
+
+ /* First, split up the current URL in parts so that we can use the
+ parts for checking against the already present connections. In order
+ to not have to modify everything at once, we allocate a temporary
+ connection data struct and fill in for comparison purposes. */
+ conn = allocate_conn(data);
+
+ if(!conn)
+ return CURLE_OUT_OF_MEMORY;
+
+ /* We must set the return variable as soon as possible, so that our
+ parent can cleanup any possible allocs we may have done before
+ any failure */
+ *in_connect = conn;
+
+ /* This initing continues below, see the comment "Continue connectdata
+ * initialization here" */
+
+ /***********************************************************
+ * We need to allocate memory to store the path in. We get the size of the
+ * full URL to be sure, and we need to make it at least 256 bytes since
+ * other parts of the code will rely on this fact
+ ***********************************************************/
+#define LEAST_PATH_ALLOC 256
+ urllen=strlen(data->change.url);
+ if(urllen < LEAST_PATH_ALLOC)
+ urllen=LEAST_PATH_ALLOC;
+
+ /*
+ * We malloc() the buffers below urllen+2 to make room for 2 possibilities:
+ * 1 - an extra terminating zero
+ * 2 - an extra slash (in case a syntax like "www.host.com?moo" is used)
+ */
+
+ Curl_safefree(data->state.pathbuffer);
+ data->state.path = NULL;
+
+ data->state.pathbuffer = malloc(urllen+2);
+ if(NULL == data->state.pathbuffer)
+ return CURLE_OUT_OF_MEMORY; /* really bad error */
+ data->state.path = data->state.pathbuffer;
+
+ conn->host.rawalloc = malloc(urllen+2);
+ if(NULL == conn->host.rawalloc) {
+ Curl_safefree(data->state.pathbuffer);
+ data->state.path = NULL;
+ return CURLE_OUT_OF_MEMORY;
+ }
+
+ conn->host.name = conn->host.rawalloc;
+ conn->host.name[0] = 0;
+
+ result = parseurlandfillconn(data, conn, &prot_missing, user, passwd);
+ if(result != CURLE_OK)
+ return result;
+
+ /*************************************************************
+ * No protocol part in URL was used, add it!
+ *************************************************************/
+ if(prot_missing) {
+ /* We're guessing prefixes here and if we're told to use a proxy or if
+ we're gonna follow a Location: later or... then we need the protocol
+ part added so that we have a valid URL. */
+ char *reurl;
+
+ reurl = aprintf("%s://%s", conn->handler->scheme, data->change.url);
+
+ if(!reurl) {
+ Curl_safefree(proxy);
+ return CURLE_OUT_OF_MEMORY;
+ }
+
+ if(data->change.url_alloc) {
+ Curl_safefree(data->change.url);
+ data->change.url_alloc = FALSE;
+ }
+
+ data->change.url = reurl;
+ data->change.url_alloc = TRUE; /* free this later */
+ }
+
+ /*************************************************************
+ * If the protocol can't handle url query strings, then cut
+ * of the unhandable part
+ *************************************************************/
+ if((conn->given->flags&PROTOPT_NOURLQUERY)) {
+ char *path_q_sep = strchr(conn->data->state.path, '?');
+ if(path_q_sep) {
+ /* according to rfc3986, allow the query (?foo=bar)
+ also on protocols that can't handle it.
+
+ cut the string-part after '?'
+ */
+
+ /* terminate the string */
+ path_q_sep[0] = 0;
+ }
+ }
+
+#ifndef CURL_DISABLE_PROXY
+ /*************************************************************
+ * Extract the user and password from the authentication string
+ *************************************************************/
+ if(conn->bits.proxy_user_passwd) {
+ result = parse_proxy_auth(data, conn);
+ if(result != CURLE_OK)
+ return result;
+ }
+
+ /*************************************************************
+ * Detect what (if any) proxy to use
+ *************************************************************/
+ if(data->set.str[STRING_PROXY]) {
+ proxy = strdup(data->set.str[STRING_PROXY]);
+ /* if global proxy is set, this is it */
+ if(NULL == proxy) {
+ failf(data, "memory shortage");
+ return CURLE_OUT_OF_MEMORY;
+ }
+ }
+
+ if(data->set.str[STRING_NOPROXY] &&
+ check_noproxy(conn->host.name, data->set.str[STRING_NOPROXY])) {
+ if(proxy) {
+ free(proxy); /* proxy is in exception list */
+ proxy = NULL;
+ }
+ }
+ else if(!proxy)
+ proxy = detect_proxy(conn);
+
+ if(proxy && (!*proxy || (conn->handler->flags & PROTOPT_NONETWORK))) {
+ free(proxy); /* Don't bother with an empty proxy string or if the
+ protocol doesn't work with network */
+ proxy = NULL;
+ }
+
+ /***********************************************************************
+ * If this is supposed to use a proxy, we need to figure out the proxy host
+ * name, proxy type and port number, so that we can re-use an existing
+ * connection that may exist registered to the same proxy host.
+ ***********************************************************************/
+ if(proxy) {
+ result = parse_proxy(data, conn, proxy);
+
+ free(proxy); /* parse_proxy copies the proxy string */
+
+ if(result)
+ return result;
+
+ if((conn->proxytype == CURLPROXY_HTTP) ||
+ (conn->proxytype == CURLPROXY_HTTP_1_0)) {
+#ifdef CURL_DISABLE_HTTP
+ /* asking for a HTTP proxy is a bit funny when HTTP is disabled... */
+ return CURLE_UNSUPPORTED_PROTOCOL;
+#else
+ /* force this connection's protocol to become HTTP if not already
+ compatible - if it isn't tunneling through */
+ if(!(conn->handler->protocol & CURLPROTO_HTTP) &&
+ !conn->bits.tunnel_proxy)
+ conn->handler = &Curl_handler_http;
+
+ conn->bits.httpproxy = TRUE;
+#endif
+ }
+ else
+ conn->bits.httpproxy = FALSE; /* not a HTTP proxy */
+ conn->bits.proxy = TRUE;
+ }
+ else {
+ /* we aren't using the proxy after all... */
+ conn->bits.proxy = FALSE;
+ conn->bits.httpproxy = FALSE;
+ conn->bits.proxy_user_passwd = FALSE;
+ conn->bits.tunnel_proxy = FALSE;
+ }
+
+#endif /* CURL_DISABLE_PROXY */
+
+ /*************************************************************
+ * Setup internals depending on protocol. Needs to be done after
+ * we figured out what/if proxy to use.
+ *************************************************************/
+ result = setup_connection_internals(conn);
+ if(result != CURLE_OK) {
+ Curl_safefree(proxy);
+ return result;
+ }
+
+ conn->recv[FIRSTSOCKET] = Curl_recv_plain;
+ conn->send[FIRSTSOCKET] = Curl_send_plain;
+ conn->recv[SECONDARYSOCKET] = Curl_recv_plain;
+ conn->send[SECONDARYSOCKET] = Curl_send_plain;
+
+ /***********************************************************************
+ * file: is a special case in that it doesn't need a network connection
+ ***********************************************************************/
+#ifndef CURL_DISABLE_FILE
+ if(conn->handler->flags & PROTOPT_NONETWORK) {
+ bool done;
+ /* this is supposed to be the connect function so we better at least check
+ that the file is present here! */
+ DEBUGASSERT(conn->handler->connect_it);
+ result = conn->handler->connect_it(conn, &done);
+
+ /* Setup a "faked" transfer that'll do nothing */
+ if(CURLE_OK == result) {
+ conn->data = data;
+ conn->bits.tcpconnect[FIRSTSOCKET] = TRUE; /* we are "connected */
+
+ ConnectionStore(data, conn);
+
+ /*
+ * Setup whatever necessary for a resumed transfer
+ */
+ result = setup_range(data);
+ if(result) {
+ DEBUGASSERT(conn->handler->done);
+ /* we ignore the return code for the protocol-specific DONE */
+ (void)conn->handler->done(conn, result, FALSE);
+ return result;
+ }
+
+ Curl_setup_transfer(conn, -1, -1, FALSE, NULL, /* no download */
+ -1, NULL); /* no upload */
+ }
+
+ return result;
+ }
+#endif
+
+ /*************************************************************
+ * If the protocol is using SSL and HTTP proxy is used, we set
+ * the tunnel_proxy bit.
+ *************************************************************/
+ if((conn->given->flags&PROTOPT_SSL) && conn->bits.httpproxy)
+ conn->bits.tunnel_proxy = TRUE;
+
+ /*************************************************************
+ * Figure out the remote port number and fix it in the URL
+ *************************************************************/
+ result = parse_remote_port(data, conn);
+ if(result != CURLE_OK)
+ return result;
+
+ /*************************************************************
+ * Check for an overridden user name and password, then set it
+ * for use
+ *************************************************************/
+ override_userpass(data, conn, user, passwd);
+ result = set_userpass(conn, user, passwd);
+ if(result != CURLE_OK)
+ return result;
+
+ /* Get a cloned copy of the SSL config situation stored in the
+ connection struct. But to get this going nicely, we must first make
+ sure that the strings in the master copy are pointing to the correct
+ strings in the session handle strings array!
+
+ Keep in mind that the pointers in the master copy are pointing to strings
+ that will be freed as part of the SessionHandle struct, but all cloned
+ copies will be separately allocated.
+ */
+ data->set.ssl.CApath = data->set.str[STRING_SSL_CAPATH];
+ data->set.ssl.CAfile = data->set.str[STRING_SSL_CAFILE];
+ data->set.ssl.CRLfile = data->set.str[STRING_SSL_CRLFILE];
+ data->set.ssl.issuercert = data->set.str[STRING_SSL_ISSUERCERT];
+ data->set.ssl.random_file = data->set.str[STRING_SSL_RANDOM_FILE];
+ data->set.ssl.egdsocket = data->set.str[STRING_SSL_EGDSOCKET];
+ data->set.ssl.cipher_list = data->set.str[STRING_SSL_CIPHER_LIST];
+#ifdef USE_TLS_SRP
+ data->set.ssl.username = data->set.str[STRING_TLSAUTH_USERNAME];
+ data->set.ssl.password = data->set.str[STRING_TLSAUTH_PASSWORD];
+#endif
+
+ if(!Curl_clone_ssl_config(&data->set.ssl, &conn->ssl_config))
+ return CURLE_OUT_OF_MEMORY;
+
+ /*************************************************************
+ * Check the current list of connections to see if we can
+ * re-use an already existing one or if we have to create a
+ * new one.
+ *************************************************************/
+
+ /* reuse_fresh is TRUE if we are told to use a new connection by force, but
+ we only acknowledge this option if this is not a re-used connection
+ already (which happens due to follow-location or during a HTTP
+ authentication phase). */
+ if(data->set.reuse_fresh && !data->state.this_is_a_follow)
+ reuse = FALSE;
+ else
+ reuse = ConnectionExists(data, conn, &conn_temp);
+
+ if(reuse) {
+ /*
+ * We already have a connection for this, we got the former connection
+ * in the conn_temp variable and thus we need to cleanup the one we
+ * just allocated before we can move along and use the previously
+ * existing one.
+ */
+ reuse_conn(conn, conn_temp);
+ free(conn); /* we don't need this anymore */
+ conn = conn_temp;
+ *in_connect = conn;
+
+ /* set a pointer to the hostname we display */
+ fix_hostname(data, conn, &conn->host);
+
+ infof(data, "Re-using existing connection! (#%ld) with host %s\n",
+ conn->connection_id,
+ conn->proxy.name?conn->proxy.dispname:conn->host.dispname);
+ }
+ else {
+ /*
+ * This is a brand new connection, so let's store it in the connection
+ * cache of ours!
+ */
+ ConnectionStore(data, conn);
+ }
+
+ /* Setup and init stuff before DO starts, in preparing for the transfer. */
+ do_init(conn);
+
+ /*
+ * Setup whatever necessary for a resumed transfer
+ */
+ result = setup_range(data);
+ if(result)
+ return result;
+
+ /* Continue connectdata initialization here. */
+
+ /*
+ * Inherit the proper values from the urldata struct AFTER we have arranged
+ * the persistent connection stuff
+ */
+ conn->fread_func = data->set.fread_func;
+ conn->fread_in = data->set.in;
+ conn->seek_func = data->set.seek_func;
+ conn->seek_client = data->set.seek_client;
+
+ /*************************************************************
+ * Resolve the address of the server or proxy
+ *************************************************************/
+ result = resolve_server(data, conn, async);
+
+ return result;
+}
+
+/* Curl_setup_conn() is called after the name resolve initiated in
+ * create_conn() is all done.
+ *
+ * Curl_setup_conn() also handles reused connections
+ *
+ * conn->data MUST already have been setup fine (in create_conn)
+ */
+
+CURLcode Curl_setup_conn(struct connectdata *conn,
+ bool *protocol_done)
+{
+ CURLcode result = CURLE_OK;
+ struct SessionHandle *data = conn->data;
+
+ Curl_pgrsTime(data, TIMER_NAMELOOKUP);
+
+ if(conn->handler->flags & PROTOPT_NONETWORK) {
+ /* nothing to setup when not using a network */
+ *protocol_done = TRUE;
+ return result;
+ }
+ *protocol_done = FALSE; /* default to not done */
+
+ /* set proxy_connect_closed to false unconditionally already here since it
+ is used strictly to provide extra information to a parent function in the
+ case of proxy CONNECT failures and we must make sure we don't have it
+ lingering set from a previous invoke */
+ conn->bits.proxy_connect_closed = FALSE;
+
+ /*
+ * Set user-agent. Used for HTTP, but since we can attempt to tunnel
+ * basically anything through a http proxy we can't limit this based on
+ * protocol.
+ */
+ if(data->set.str[STRING_USERAGENT]) {
+ Curl_safefree(conn->allocptr.uagent);
+ conn->allocptr.uagent =
+ aprintf("User-Agent: %s\r\n", data->set.str[STRING_USERAGENT]);
+ if(!conn->allocptr.uagent)
+ return CURLE_OUT_OF_MEMORY;
+ }
+
+ data->req.headerbytecount = 0;
+
+#ifdef CURL_DO_LINEEND_CONV
+ data->state.crlf_conversions = 0; /* reset CRLF conversion counter */
+#endif /* CURL_DO_LINEEND_CONV */
+
+ for(;;) {
+ /* loop for CURL_SERVER_CLOSED_CONNECTION */
+
+ if(CURL_SOCKET_BAD == conn->sock[FIRSTSOCKET]) {
+ /* Try to connect only if not already connected */
+ bool connected = FALSE;
+
+ result = ConnectPlease(data, conn, &connected);
+
+ if(result && !conn->ip_addr) {
+ /* transport connection failure not related with authentication */
+ conn->bits.tcpconnect[FIRSTSOCKET] = FALSE;
+ return result;
+ }
+
+ if(connected) {
+ result = Curl_protocol_connect(conn, protocol_done);
+ if(CURLE_OK == result)
+ conn->bits.tcpconnect[FIRSTSOCKET] = TRUE;
+ }
+ else
+ conn->bits.tcpconnect[FIRSTSOCKET] = FALSE;
+
+ /* if the connection was closed by the server while exchanging
+ authentication informations, retry with the new set
+ authentication information */
+ if(conn->bits.proxy_connect_closed) {
+ /* reset the error buffer */
+ if(data->set.errorbuffer)
+ data->set.errorbuffer[0] = '\0';
+ data->state.errorbuf = FALSE;
+ continue;
+ }
+
+ if(CURLE_OK != result)
+ return result;
+ }
+ else {
+ Curl_pgrsTime(data, TIMER_CONNECT); /* we're connected already */
+ Curl_pgrsTime(data, TIMER_APPCONNECT); /* we're connected already */
+ conn->bits.tcpconnect[FIRSTSOCKET] = TRUE;
+ *protocol_done = TRUE;
+ Curl_verboseconnect(conn);
+ Curl_updateconninfo(conn, conn->sock[FIRSTSOCKET]);
+ }
+ /* Stop the loop now */
+ break;
+ }
+
+ conn->now = Curl_tvnow(); /* time this *after* the connect is done, we
+ set this here perhaps a second time */
+
+#ifdef __EMX__
+ /*
+ * This check is quite a hack. We're calling _fsetmode to fix the problem
+ * with fwrite converting newline characters (you get mangled text files,
+ * and corrupted binary files when you download to stdout and redirect it to
+ * a file).
+ */
+
+ if((data->set.out)->_handle == NULL) {
+ _fsetmode(stdout, "b");
+ }
+#endif
+
+ return result;
+}
+
+CURLcode Curl_connect(struct SessionHandle *data,
+ struct connectdata **in_connect,
+ bool *asyncp,
+ bool *protocol_done)
+{
+ CURLcode code;
+
+ *asyncp = FALSE; /* assume synchronous resolves by default */
+
+ /* call the stuff that needs to be called */
+ code = create_conn(data, in_connect, asyncp);
+
+ if(CURLE_OK == code) {
+ /* no error */
+ if((*in_connect)->send_pipe->size || (*in_connect)->recv_pipe->size)
+ /* pipelining */
+ *protocol_done = TRUE;
+ else if(!*asyncp) {
+ /* DNS resolution is done: that's either because this is a reused
+ connection, in which case DNS was unnecessary, or because DNS
+ really did finish already (synch resolver/fast async resolve) */
+ code = Curl_setup_conn(*in_connect, protocol_done);
+ }
+ }
+
+ if(code && *in_connect) {
+ /* We're not allowed to return failure with memory left allocated
+ in the connectdata struct, free those here */
+ Curl_disconnect(*in_connect, FALSE); /* close the connection */
+ *in_connect = NULL; /* return a NULL */
+ }
+
+ return code;
+}
+
+CURLcode Curl_done(struct connectdata **connp,
+ CURLcode status, /* an error if this is called after an
+ error was detected */
+ bool premature)
+{
+ CURLcode result;
+ struct connectdata *conn;
+ struct SessionHandle *data;
+
+ DEBUGASSERT(*connp);
+
+ conn = *connp;
+ data = conn->data;
+
+ if(conn->bits.done)
+ /* Stop if Curl_done() has already been called */
+ return CURLE_OK;
+
+ Curl_getoff_all_pipelines(data, conn);
+
+ if((conn->send_pipe->size + conn->recv_pipe->size != 0 &&
+ !data->set.reuse_forbid &&
+ !conn->bits.close))
+ /* Stop if pipeline is not empty and we do not have to close
+ connection. */
+ return CURLE_OK;
+
+ conn->bits.done = TRUE; /* called just now! */
+
+ /* Cleanup possible redirect junk */
+ if(data->req.newurl) {
+ free(data->req.newurl);
+ data->req.newurl = NULL;
+ }
+ if(data->req.location) {
+ free(data->req.location);
+ data->req.location = NULL;
+ }
+
+ Curl_resolver_cancel(conn);
+
+ if(conn->dns_entry) {
+ Curl_resolv_unlock(data, conn->dns_entry); /* done with this */
+ conn->dns_entry = NULL;
+ }
+
+ /* this calls the protocol-specific function pointer previously set */
+ if(conn->handler->done)
+ result = conn->handler->done(conn, status, premature);
+ else
+ result = CURLE_OK;
+
+ if(Curl_pgrsDone(conn) && !result)
+ result = CURLE_ABORTED_BY_CALLBACK;
+
+ /* if the transfer was completed in a paused state there can be buffered
+ data left to write and then kill */
+ if(data->state.tempwrite) {
+ free(data->state.tempwrite);
+ data->state.tempwrite = NULL;
+ }
+
+ /* if data->set.reuse_forbid is TRUE, it means the libcurl client has
+ forced us to close this no matter what we think.
+
+ if conn->bits.close is TRUE, it means that the connection should be
+ closed in spite of all our efforts to be nice, due to protocol
+ restrictions in our or the server's end
+
+ if premature is TRUE, it means this connection was said to be DONE before
+ the entire request operation is complete and thus we can't know in what
+ state it is for re-using, so we're forced to close it. In a perfect world
+ we can add code that keep track of if we really must close it here or not,
+ but currently we have no such detail knowledge.
+
+ connection_id == -1 here means that the connection has not been added
+ to the connection cache (OOM) and thus we must disconnect it here.
+ */
+ if(data->set.reuse_forbid || conn->bits.close || premature ||
+ (-1 == conn->connection_id)) {
+ CURLcode res2 = Curl_disconnect(conn, premature); /* close connection */
+
+ /* If we had an error already, make sure we return that one. But
+ if we got a new error, return that. */
+ if(!result && res2)
+ result = res2;
+ }
+ else {
+ ConnectionDone(conn); /* the connection is no longer in use */
+
+ /* remember the most recently used connection */
+ data->state.lastconnect = conn;
+
+ infof(data, "Connection #%ld to host %s left intact\n",
+ conn->connection_id,
+ conn->bits.httpproxy?conn->proxy.dispname:conn->host.dispname);
+ }
+
+ *connp = NULL; /* to make the caller of this function better detect that
+ this was either closed or handed over to the connection
+ cache here, and therefore cannot be used from this point on
+ */
+
+ return result;
+}
+
+/*
+ * do_init() inits the readwrite session. This is inited each time (in the DO
+ * function before the protocol-specific DO functions are invoked) for a
+ * transfer, sometimes multiple times on the same SessionHandle. Make sure
+ * nothing in here depends on stuff that are setup dynamically for the
+ * transfer.
+ */
+
+static CURLcode do_init(struct connectdata *conn)
+{
+ struct SessionHandle *data = conn->data;
+ struct SingleRequest *k = &data->req;
+
+ conn->bits.done = FALSE; /* Curl_done() is not called yet */
+ conn->bits.do_more = FALSE; /* by default there's no curl_do_more() to use */
+ data->state.expect100header = FALSE;
+
+ if(data->set.opt_no_body)
+ /* in HTTP lingo, no body means using the HEAD request... */
+ data->set.httpreq = HTTPREQ_HEAD;
+ else if(HTTPREQ_HEAD == data->set.httpreq)
+ /* ... but if unset there really is no perfect method that is the
+ "opposite" of HEAD but in reality most people probably think GET
+ then. The important thing is that we can't let it remain HEAD if the
+ opt_no_body is set FALSE since then we'll behave wrong when getting
+ HTTP. */
+ data->set.httpreq = HTTPREQ_GET;
+
+ /* NB: the content encoding software depends on this initialization */
+ Curl_easy_initHandleData(data);
+
+ k->start = Curl_tvnow(); /* start time */
+ k->now = k->start; /* current time is now */
+ k->header = TRUE; /* assume header */
+
+ k->bytecount = 0;
+
+ k->buf = data->state.buffer;
+ k->uploadbuf = data->state.uploadbuffer;
+ k->hbufp = data->state.headerbuff;
+ k->ignorebody=FALSE;
+
+ Curl_speedinit(data);
+
+ Curl_pgrsSetUploadCounter(data, 0);
+ Curl_pgrsSetDownloadCounter(data, 0);
+
+ return CURLE_OK;
+}
+
+/*
+ * do_complete is called when the DO actions are complete.
+ *
+ * We init chunking and trailer bits to their default values here immediately
+ * before receiving any header data for the current request in the pipeline.
+ */
+static void do_complete(struct connectdata *conn)
+{
+ conn->data->req.chunk=FALSE;
+ conn->data->req.maxfd = (conn->sockfd>conn->writesockfd?
+ conn->sockfd:conn->writesockfd)+1;
+ Curl_pgrsTime(conn->data, TIMER_PRETRANSFER);
+}
+
+CURLcode Curl_do(struct connectdata **connp, bool *done)
+{
+ CURLcode result=CURLE_OK;
+ struct connectdata *conn = *connp;
+ struct SessionHandle *data = conn->data;
+
+ if(conn->handler->do_it) {
+ /* generic protocol-specific function pointer set in curl_connect() */
+ result = conn->handler->do_it(conn, done);
+
+ /* This was formerly done in curl_transfer.c, but we better do it here */
+ if((CURLE_SEND_ERROR == result) && conn->bits.reuse) {
+ /*
+ * If the connection is using an easy handle, call reconnect
+ * to re-establish the connection. Otherwise, let the multi logic
+ * figure out how to re-establish the connection.
+ */
+ if(!data->multi) {
+ result = Curl_reconnect_request(connp);
+
+ if(result == CURLE_OK) {
+ /* ... finally back to actually retry the DO phase */
+ conn = *connp; /* re-assign conn since Curl_reconnect_request
+ creates a new connection */
+ result = conn->handler->do_it(conn, done);
+ }
+ }
+ else
+ return result;
+ }
+
+ if((result == CURLE_OK) && *done)
+ /* do_complete must be called after the protocol-specific DO function */
+ do_complete(conn);
+ }
+ return result;
+}
+
+/*
+ * Curl_do_more() is called during the DO_MORE multi state. It is basically a
+ * second stage DO state which (wrongly) was introduced to support FTP's
+ * second connection.
+ *
+ * TODO: A future libcurl should be able to work away this state.
+ *
+ */
+
+CURLcode Curl_do_more(struct connectdata *conn, bool *completed)
+{
+ CURLcode result=CURLE_OK;
+
+ *completed = FALSE;
+
+ if(conn->handler->do_more)
+ result = conn->handler->do_more(conn, completed);
+
+ if(!result && *completed)
+ /* do_complete must be called after the protocol-specific DO function */
+ do_complete(conn);
+
+ return result;
+}
+
+/* Called on connect, and if there's already a protocol-specific struct
+ allocated for a different connection, this frees it that it can be setup
+ properly later on. */
+void Curl_reset_reqproto(struct connectdata *conn)
+{
+ struct SessionHandle *data = conn->data;
+ if(data->state.proto.generic && data->state.current_conn != conn) {
+ free(data->state.proto.generic);
+ data->state.proto.generic = NULL;
+ }
+ data->state.current_conn = conn;
+}