diff options
Diffstat (limited to 'lib/arpa_telnet.h')
-rw-r--r-- | lib/arpa_telnet.h | 319 |
1 files changed, 319 insertions, 0 deletions
diff --git a/lib/arpa_telnet.h b/lib/arpa_telnet.h new file mode 100644 index 000000000..25085b89a --- /dev/null +++ b/lib/arpa_telnet.h @@ -0,0 +1,319 @@ +/* + * Copyright (c) 1983, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)telnet.h 8.2 (Berkeley) 12/15/93 + */ + +#ifndef _ARPA_TELNET_H +#define _ARPA_TELNET_H + +/* + * Definitions for the TELNET protocol. + */ +#define IAC 255 /* interpret as command: */ +#define DONT 254 /* you are not to use option */ +#define DO 253 /* please, you use option */ +#define WONT 252 /* I won't use option */ +#define WILL 251 /* I will use option */ +#define SB 250 /* interpret as subnegotiation */ +#define GA 249 /* you may reverse the line */ +#define EL 248 /* erase the current line */ +#define EC 247 /* erase the current character */ +#define AYT 246 /* are you there */ +#define AO 245 /* abort output--but let prog finish */ +#define IP 244 /* interrupt process--permanently */ +#define BREAK 243 /* break */ +#define DM 242 /* data mark--for connect. cleaning */ +#define NOP 241 /* nop */ +#define SE 240 /* end sub negotiation */ +#define EOR 239 /* end of record (transparent mode) */ +#define ABORT 238 /* Abort process */ +#define SUSP 237 /* Suspend process */ +#define xEOF 236 /* End of file: EOF is already used... */ + +#define SYNCH 242 /* for telfunc calls */ + +#ifdef TELCMDS +char *telcmds[] = { + "EOF", "SUSP", "ABORT", "EOR", + "SE", "NOP", "DMARK", "BRK", "IP", "AO", "AYT", "EC", + "EL", "GA", "SB", "WILL", "WONT", "DO", "DONT", "IAC", 0, +}; +#else +extern char *telcmds[]; +#endif + +#define TELCMD_FIRST xEOF +#define TELCMD_LAST IAC +#define TELCMD_OK(x) ((unsigned int)(x) <= TELCMD_LAST && \ + (unsigned int)(x) >= TELCMD_FIRST) +#define TELCMD(x) telcmds[(x)-TELCMD_FIRST] + +/* telnet options */ +#define TELOPT_BINARY 0 /* 8-bit data path */ +#define TELOPT_ECHO 1 /* echo */ +#define TELOPT_RCP 2 /* prepare to reconnect */ +#define TELOPT_SGA 3 /* suppress go ahead */ +#define TELOPT_NAMS 4 /* approximate message size */ +#define TELOPT_STATUS 5 /* give status */ +#define TELOPT_TM 6 /* timing mark */ +#define TELOPT_RCTE 7 /* remote controlled transmission and echo */ +#define TELOPT_NAOL 8 /* negotiate about output line width */ +#define TELOPT_NAOP 9 /* negotiate about output page size */ +#define TELOPT_NAOCRD 10 /* negotiate about CR disposition */ +#define TELOPT_NAOHTS 11 /* negotiate about horizontal tabstops */ +#define TELOPT_NAOHTD 12 /* negotiate about horizontal tab disposition */ +#define TELOPT_NAOFFD 13 /* negotiate about formfeed disposition */ +#define TELOPT_NAOVTS 14 /* negotiate about vertical tab stops */ +#define TELOPT_NAOVTD 15 /* negotiate about vertical tab disposition */ +#define TELOPT_NAOLFD 16 /* negotiate about output LF disposition */ +#define TELOPT_XASCII 17 /* extended ascic character set */ +#define TELOPT_LOGOUT 18 /* force logout */ +#define TELOPT_BM 19 /* byte macro */ +#define TELOPT_DET 20 /* data entry terminal */ +#define TELOPT_SUPDUP 21 /* supdup protocol */ +#define TELOPT_SUPDUPOUTPUT 22 /* supdup output */ +#define TELOPT_SNDLOC 23 /* send location */ +#define TELOPT_TTYPE 24 /* terminal type */ +#define TELOPT_EOR 25 /* end or record */ +#define TELOPT_TUID 26 /* TACACS user identification */ +#define TELOPT_OUTMRK 27 /* output marking */ +#define TELOPT_TTYLOC 28 /* terminal location number */ +#define TELOPT_3270REGIME 29 /* 3270 regime */ +#define TELOPT_X3PAD 30 /* X.3 PAD */ +#define TELOPT_NAWS 31 /* window size */ +#define TELOPT_TSPEED 32 /* terminal speed */ +#define TELOPT_LFLOW 33 /* remote flow control */ +#define TELOPT_LINEMODE 34 /* Linemode option */ +#define TELOPT_XDISPLOC 35 /* X Display Location */ +#define TELOPT_OLD_ENVIRON 36 /* Old - Environment variables */ +#define TELOPT_AUTHENTICATION 37/* Authenticate */ +#define TELOPT_ENCRYPT 38 /* Encryption option */ +#define TELOPT_NEW_ENVIRON 39 /* New - Environment variables */ +#define TELOPT_EXOPL 255 /* extended-options-list */ + + +#define NTELOPTS (1+TELOPT_NEW_ENVIRON) +#ifdef TELOPTS +char *telopts[NTELOPTS+1] = { + "BINARY", "ECHO", "RCP", "SUPPRESS GO AHEAD", "NAME", + "STATUS", "TIMING MARK", "RCTE", "NAOL", "NAOP", + "NAOCRD", "NAOHTS", "NAOHTD", "NAOFFD", "NAOVTS", + "NAOVTD", "NAOLFD", "EXTEND ASCII", "LOGOUT", "BYTE MACRO", + "DATA ENTRY TERMINAL", "SUPDUP", "SUPDUP OUTPUT", + "SEND LOCATION", "TERMINAL TYPE", "END OF RECORD", + "TACACS UID", "OUTPUT MARKING", "TTYLOC", + "3270 REGIME", "X.3 PAD", "NAWS", "TSPEED", "LFLOW", + "LINEMODE", "XDISPLOC", "OLD-ENVIRON", "AUTHENTICATION", + "ENCRYPT", "NEW-ENVIRON", + 0, +}; +#define TELOPT_FIRST TELOPT_BINARY +#define TELOPT_LAST TELOPT_NEW_ENVIRON +#define TELOPT_OK(x) ((unsigned int)(x) <= TELOPT_LAST) +#define TELOPT(x) telopts[(x)-TELOPT_FIRST] +#endif + +/* sub-option qualifiers */ +#define TELQUAL_IS 0 /* option is... */ +#define TELQUAL_SEND 1 /* send option */ +#define TELQUAL_INFO 2 /* ENVIRON: informational version of IS */ +#define TELQUAL_REPLY 2 /* AUTHENTICATION: client version of IS */ +#define TELQUAL_NAME 3 /* AUTHENTICATION: client version of IS */ + +#define LFLOW_OFF 0 /* Disable remote flow control */ +#define LFLOW_ON 1 /* Enable remote flow control */ +#define LFLOW_RESTART_ANY 2 /* Restart output on any char */ +#define LFLOW_RESTART_XON 3 /* Restart output only on XON */ + +/* + * LINEMODE suboptions + */ + +#define LM_MODE 1 +#define LM_FORWARDMASK 2 +#define LM_SLC 3 + +#define MODE_EDIT 0x01 +#define MODE_TRAPSIG 0x02 +#define MODE_ACK 0x04 +#define MODE_SOFT_TAB 0x08 +#define MODE_LIT_ECHO 0x10 + +#define MODE_MASK 0x1f + +/* Not part of protocol, but needed to simplify things... */ +#define MODE_FLOW 0x0100 +#define MODE_ECHO 0x0200 +#define MODE_INBIN 0x0400 +#define MODE_OUTBIN 0x0800 +#define MODE_FORCE 0x1000 + +#define SLC_SYNCH 1 +#define SLC_BRK 2 +#define SLC_IP 3 +#define SLC_AO 4 +#define SLC_AYT 5 +#define SLC_EOR 6 +#define SLC_ABORT 7 +#define SLC_EOF 8 +#define SLC_SUSP 9 +#define SLC_EC 10 +#define SLC_EL 11 +#define SLC_EW 12 +#define SLC_RP 13 +#define SLC_LNEXT 14 +#define SLC_XON 15 +#define SLC_XOFF 16 +#define SLC_FORW1 17 +#define SLC_FORW2 18 + +#define NSLC 18 + +/* + * For backwards compatability, we define SLC_NAMES to be the + * list of names if SLC_NAMES is not defined. + */ +#define SLC_NAMELIST "0", "SYNCH", "BRK", "IP", "AO", "AYT", "EOR", \ + "ABORT", "EOF", "SUSP", "EC", "EL", "EW", "RP", \ + "LNEXT", "XON", "XOFF", "FORW1", "FORW2", 0, +#ifdef SLC_NAMES +char *slc_names[] = { + SLC_NAMELIST +}; +#else +extern char *slc_names[]; +#define SLC_NAMES SLC_NAMELIST +#endif + +#define SLC_NAME_OK(x) ((unsigned int)(x) <= NSLC) +#define SLC_NAME(x) slc_names[x] + +#define SLC_NOSUPPORT 0 +#define SLC_CANTCHANGE 1 +#define SLC_VARIABLE 2 +#define SLC_DEFAULT 3 +#define SLC_LEVELBITS 0x03 + +#define SLC_FUNC 0 +#define SLC_FLAGS 1 +#define SLC_VALUE 2 + +#define SLC_ACK 0x80 +#define SLC_FLUSHIN 0x40 +#define SLC_FLUSHOUT 0x20 + +#define OLD_ENV_VAR 1 +#define OLD_ENV_VALUE 0 +#define NEW_ENV_VAR 0 +#define NEW_ENV_VALUE 1 +#define ENV_ESC 2 +#define ENV_USERVAR 3 + +/* + * AUTHENTICATION suboptions + */ + +/* + * Who is authenticating who ... + */ +#define AUTH_WHO_CLIENT 0 /* Client authenticating server */ +#define AUTH_WHO_SERVER 1 /* Server authenticating client */ +#define AUTH_WHO_MASK 1 + +/* + * amount of authentication done + */ +#define AUTH_HOW_ONE_WAY 0 +#define AUTH_HOW_MUTUAL 2 +#define AUTH_HOW_MASK 2 + +#define AUTHTYPE_NULL 0 +#define AUTHTYPE_KERBEROS_V4 1 +#define AUTHTYPE_KERBEROS_V5 2 +#define AUTHTYPE_SPX 3 +#define AUTHTYPE_MINK 4 +#define AUTHTYPE_CNT 5 + +#define AUTHTYPE_TEST 99 + +#ifdef AUTH_NAMES +char *authtype_names[] = { + "NULL", "KERBEROS_V4", "KERBEROS_V5", "SPX", "MINK", 0, +}; +#else +extern char *authtype_names[]; +#endif + +#define AUTHTYPE_NAME_OK(x) ((unsigned int)(x) < AUTHTYPE_CNT) +#define AUTHTYPE_NAME(x) authtype_names[x] + +/* + * ENCRYPTion suboptions + */ +#define ENCRYPT_IS 0 /* I pick encryption type ... */ +#define ENCRYPT_SUPPORT 1 /* I support encryption types ... */ +#define ENCRYPT_REPLY 2 /* Initial setup response */ +#define ENCRYPT_START 3 /* Am starting to send encrypted */ +#define ENCRYPT_END 4 /* Am ending encrypted */ +#define ENCRYPT_REQSTART 5 /* Request you start encrypting */ +#define ENCRYPT_REQEND 6 /* Request you send encrypting */ +#define ENCRYPT_ENC_KEYID 7 +#define ENCRYPT_DEC_KEYID 8 +#define ENCRYPT_CNT 9 + +#define ENCTYPE_ANY 0 +#define ENCTYPE_DES_CFB64 1 +#define ENCTYPE_DES_OFB64 2 +#define ENCTYPE_CNT 3 + +#ifdef ENCRYPT_NAMES +char *encrypt_names[] = { + "IS", "SUPPORT", "REPLY", "START", "END", + "REQUEST-START", "REQUEST-END", "ENC-KEYID", "DEC-KEYID", + 0, +}; +char *enctype_names[] = { + "ANY", "DES_CFB64", "DES_OFB64", 0, +}; +#else +extern char *encrypt_names[]; +extern char *enctype_names[]; +#endif + + +#define ENCRYPT_NAME_OK(x) ((unsigned int)(x) < ENCRYPT_CNT) +#define ENCRYPT_NAME(x) encrypt_names[x] + +#define ENCTYPE_NAME_OK(x) ((unsigned int)(x) < ENCTYPE_CNT) +#define ENCTYPE_NAME(x) enctype_names[x] +#endif /* _ARPA_TELNET_H */ |