6 files changed, 17 insertions, 16 deletions
diff --git a/docs/libcurl/opts/CURLOPT_MAXCONNECTS.3 b/docs/libcurl/opts/CURLOPT_MAXCONNECTS.3
index ea875fa34..8e90a9d26 100644
--- a/docs/libcurl/opts/CURLOPT_MAXCONNECTS.3
+++ b/docs/libcurl/opts/CURLOPT_MAXCONNECTS.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -44,7 +44,7 @@ get closed unnecessarily.
 
 If you add this easy handle to a multi handle, this setting is not
 acknowledged, and you must instead use \fIcurl_multi_setopt(3)\fP and the
-\fICURLMOPT_MAXCONNECTS\fP option.
+\fICURLMOPT_MAXCONNECTS(3)\fP option.
 .SH DEFAULT
 5
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PIPEWAIT.3 b/docs/libcurl/opts/CURLOPT_PIPEWAIT.3
index 62f540dcc..2dc1a5256 100644
--- a/docs/libcurl/opts/CURLOPT_PIPEWAIT.3
+++ b/docs/libcurl/opts/CURLOPT_PIPEWAIT.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -36,10 +36,10 @@ libcurl will check for existing connections to re-use and pipeline on. If no
 such connection exists it will immediately continue and create a fresh new
 connection to use.
 
-By setting this option to 1 - and having \fICURLMOPT_PIPELINE\fP enabled for
-the multi handle this transfer is associated with - libcurl will instead wait
-for the connection to reveal if it is possible to pipeline/multiplex on before
-it continues. This enables libcurl to much better keep the number of
+By setting this option to 1 - and having \fICURLMOPT_PIPELINE(3)\fP enabled
+for the multi handle this transfer is associated with - libcurl will instead
+wait for the connection to reveal if it is possible to pipeline/multiplex on
+before it continues. This enables libcurl to much better keep the number of
 connections to a minimum when using pipelining or multiplexing protocols.
 
 The effect thus becomes that with this option set, libcurl prefers to wait and
diff --git a/docs/libcurl/opts/CURLOPT_RANGE.3 b/docs/libcurl/opts/CURLOPT_RANGE.3
index 6d80a21b3..375a944c6 100644
--- a/docs/libcurl/opts/CURLOPT_RANGE.3
+++ b/docs/libcurl/opts/CURLOPT_RANGE.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -36,8 +36,8 @@ HTTP transfers also support several intervals, separated with commas as in
 \fI"X-Y,N-M"\fP. Using this kind of multiple intervals will cause the HTTP
 server to send the response document in pieces (using standard MIME separation
 techniques). Unfortunately, the HTTP standard (RFC 7233 section 3.1) allows
-servers to ignore range requests so even when you set \fICURLOPT_RANGE\fP for
-a request, you may end up getting the full response sent back.
+servers to ignore range requests so even when you set \fICURLOPT_RANGE(3)\fP
+for a request, you may end up getting the full response sent back.
 
 For RTSP, the formatting of a range should follow RFC2326 Section 12.29. For
 RTSP, byte ranges are \fBnot\fP permitted. Instead, ranges should be given in
diff --git a/docs/libcurl/opts/CURLOPT_READDATA.3 b/docs/libcurl/opts/CURLOPT_READDATA.3
index 51a0390bc..ab3b775d0 100644
--- a/docs/libcurl/opts/CURLOPT_READDATA.3
+++ b/docs/libcurl/opts/CURLOPT_READDATA.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -56,8 +56,8 @@ if(curl) {
 }
 .fi
 .SH AVAILABILITY
-This option was once known by the older name \fICURLOPT_INFILE\fP, the name
-\fICURLOPT_READDATA\fP was introduced in 7.9.7.
+This option was once known by the older name \fICURLOPT_INFILE(3)\fP, the name
+\fICURLOPT_READDATA(3)\fP was introduced in 7.9.7.
 .SH RETURN VALUE
 This will return CURLE_OK.
 .SH "SEE ALSO"
diff --git a/docs/libcurl/opts/CURLOPT_RESOLVE.3 b/docs/libcurl/opts/CURLOPT_RESOLVE.3
index 3eb1e9577..faa5c2604 100644
--- a/docs/libcurl/opts/CURLOPT_RESOLVE.3
+++ b/docs/libcurl/opts/CURLOPT_RESOLVE.3
@@ -45,7 +45,8 @@ ADDRESS can of course be either IPv4 or IPv6 style addressing.
 This option effectively pre-populates the DNS cache with entries for the
 host+port pair so redirects and everything that operations against the
 HOST+PORT will instead use your provided ADDRESS. Addresses set with
-\fICURLOPT_RESOLVE\fP will not time-out from the DNS cache like ordinary entries.
+\fICURLOPT_RESOLVE(3)\fP will not time-out from the DNS cache like ordinary
+entries.
 
 Remove names from the DNS cache again, to stop providing these fake resolves,
 by including a string in the linked list that uses the format
diff --git a/docs/libcurl/opts/CURLOPT_SSLENGINE_DEFAULT.3 b/docs/libcurl/opts/CURLOPT_SSLENGINE_DEFAULT.3
index 2fe7aed10..0cd8d225a 100644
--- a/docs/libcurl/opts/CURLOPT_SSLENGINE_DEFAULT.3
+++ b/docs/libcurl/opts/CURLOPT_SSLENGINE_DEFAULT.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -31,7 +31,7 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSLENGINE_DEFAULT, long val);
 Pass a long set to 1 to make the already specified crypto engine the default
 for (asymmetric) crypto operations.
 
-This option has no effect unless set after \fICURLOPT_SSLENGINE\fP.
+This option has no effect unless set after \fICURLOPT_SSLENGINE(3)\fP.
 .SH DEFAULT
 None
 .SH PROTOCOLS