diff options
54 files changed, 75 insertions, 75 deletions
diff --git a/docs/cmdline-opts/ftp-port.d b/docs/cmdline-opts/ftp-port.d index a852e9054..e4b145608 100644 --- a/docs/cmdline-opts/ftp-port.d +++ b/docs/cmdline-opts/ftp-port.d @@ -12,11 +12,11 @@ to setup an IP address and port for it to connect to. <address> should be one of: .RS .IP interface -i.e "eth0" to specify which interface's IP address you want to use (Unix only) +e.g. "eth0" to specify which interface's IP address you want to use (Unix only) .IP "IP address" -i.e "192.168.10.1" to specify the exact IP address +e.g. "192.168.10.1" to specify the exact IP address .IP "host name" -i.e "my.host.domain" to specify the machine +e.g. "my.host.domain" to specify the machine .IP "-" make curl pick the same IP address that is already used for the control connection diff --git a/docs/cmdline-opts/interface.d b/docs/cmdline-opts/interface.d index bd0817618..65827fb8b 100644 --- a/docs/cmdline-opts/interface.d +++ b/docs/cmdline-opts/interface.d @@ -12,5 +12,5 @@ name, IP address or host name. An example could look like: If this option is used several times, the last one will be used. On Linux it can be used to specify a VRF, but the binary needs to either -have CAP_NET_RAW or to be ran as root. More information about Linux VRF: +have CAP_NET_RAW or to be run as root. More information about Linux VRF: https://www.kernel.org/doc/Documentation/networking/vrf.txt diff --git a/docs/cmdline-opts/page-footer b/docs/cmdline-opts/page-footer index 1ca47ae02..89bface65 100644 --- a/docs/cmdline-opts/page-footer +++ b/docs/cmdline-opts/page-footer @@ -21,7 +21,7 @@ SMTP, LDAP etc. .IP "ALL_PROXY [protocol://]<host>[:port]" Sets the proxy server to use if no protocol-specific proxy is set. .IP "NO_PROXY <comma-separated list of hosts>" -list of host names that shouldn't go through any proxy. If set to a asterisk +list of host names that shouldn't go through any proxy. If set to an asterisk \&'*' only, it matches all hosts. This environment variable disables use of the proxy even when specified with @@ -45,9 +45,9 @@ a supported one, the proxy will be treated as an HTTP proxy. The supported proxy protocol prefixes are as follows: .IP "http://" -Makes it use it as a HTTP proxy. The default if no scheme prefix is used. +Makes it use it as an HTTP proxy. The default if no scheme prefix is used. .IP "https://" -Makes it treated as a \fBHTTPS\fP proxy. +Makes it treated as an \fBHTTPS\fP proxy. .IP "socks4://" Makes it the equivalent of --socks4 .IP "socks4a://" diff --git a/docs/cmdline-opts/proxy-cert-type.d b/docs/cmdline-opts/proxy-cert-type.d index 8c9e7889b..906d2a115 100644 --- a/docs/cmdline-opts/proxy-cert-type.d +++ b/docs/cmdline-opts/proxy-cert-type.d @@ -1,6 +1,6 @@ Long: proxy-cert-type Arg: <type> Added: 7.52.0 -Help: Client certificate type for HTTS proxy +Help: Client certificate type for HTTPS proxy --- Same as --cert-type but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxytunnel.d b/docs/cmdline-opts/proxytunnel.d index f2e8b802d..42aee2bb2 100644 --- a/docs/cmdline-opts/proxytunnel.d +++ b/docs/cmdline-opts/proxytunnel.d @@ -1,6 +1,6 @@ Long: proxytunnel Short: p -Help: Operate through a HTTP proxy tunnel (using CONNECT) +Help: Operate through an HTTP proxy tunnel (using CONNECT) See-also: proxy --- When an HTTP proxy is used --proxy, this option will cause non-HTTP protocols diff --git a/docs/cmdline-opts/range.d b/docs/cmdline-opts/range.d index 760d15e22..b888dd181 100644 --- a/docs/cmdline-opts/range.d +++ b/docs/cmdline-opts/range.d @@ -4,7 +4,7 @@ Help: Retrieve only the bytes within RANGE Arg: <range> Protocols: HTTP FTP SFTP FILE --- -Retrieve a byte range (i.e a partial document) from a HTTP/1.1, FTP or SFTP +Retrieve a byte range (i.e. a partial document) from an HTTP/1.1, FTP or SFTP server or a local FILE. Ranges can be specified in a number of ways. .RS .TP 10 diff --git a/docs/libcurl/curl_easy_cleanup.3 b/docs/libcurl/curl_easy_cleanup.3 index cc5990e21..a6969a026 100644 --- a/docs/libcurl/curl_easy_cleanup.3 +++ b/docs/libcurl/curl_easy_cleanup.3 @@ -20,7 +20,7 @@ .\" * .\" ************************************************************************** .\" -.TH curl_easy_cleanup 3 "22 aug 2007" "libcurl 7.17.0" "libcurl Manual" +.TH curl_easy_cleanup 3 "22 Aug 2007" "libcurl 7.17.0" "libcurl Manual" .SH NAME curl_easy_cleanup - End a libcurl easy handle .SH SYNOPSIS diff --git a/docs/libcurl/curl_easy_setopt.3 b/docs/libcurl/curl_easy_setopt.3 index 97883d85d..01fecec86 100644 --- a/docs/libcurl/curl_easy_setopt.3 +++ b/docs/libcurl/curl_easy_setopt.3 @@ -274,9 +274,9 @@ Maximum number of redirects to follow. See \fICURLOPT_MAXREDIRS(3)\fP .IP CURLOPT_POSTREDIR How to act on redirects after POST. See \fICURLOPT_POSTREDIR(3)\fP .IP CURLOPT_PUT -Issue a HTTP PUT request. See \fICURLOPT_PUT(3)\fP +Issue an HTTP PUT request. See \fICURLOPT_PUT(3)\fP .IP CURLOPT_POST -Issue a HTTP POST request. See \fICURLOPT_POST(3)\fP +Issue an HTTP POST request. See \fICURLOPT_POST(3)\fP .IP CURLOPT_POSTFIELDS Send a POST with this data. See \fICURLOPT_POSTFIELDS(3)\fP .IP CURLOPT_POSTFIELDSIZE @@ -310,7 +310,7 @@ Start a new cookie session. See \fICURLOPT_COOKIESESSION(3)\fP .IP CURLOPT_COOKIELIST Add or control cookies. See \fICURLOPT_COOKIELIST(3)\fP .IP CURLOPT_HTTPGET -Do a HTTP GET request. See \fICURLOPT_HTTPGET(3)\fP +Do an HTTP GET request. See \fICURLOPT_HTTPGET(3)\fP .IP CURLOPT_REQUEST_TARGET Set the request target. \fICURLOPT_REQUEST_TARGET(3)\fP .IP CURLOPT_HTTP_VERSION diff --git a/docs/libcurl/curl_global_init.3 b/docs/libcurl/curl_global_init.3 index 3ba8e33ab..6ba0920c1 100644 --- a/docs/libcurl/curl_global_init.3 +++ b/docs/libcurl/curl_global_init.3 @@ -69,7 +69,7 @@ Initialize SSL. The implication here is that if this bit is not set, the initialization of the SSL layer needs to be done by the application or at least outside of -libcurl. The exact procedure how to do SSL initializtion depends on the TLS +libcurl. The exact procedure how to do SSL initialization depends on the TLS backend libcurl uses. Doing TLS based transfers without having the TLS layer initialized may lead to diff --git a/docs/libcurl/curl_global_sslset.3 b/docs/libcurl/curl_global_sslset.3 index cee84458f..efac0f91f 100644 --- a/docs/libcurl/curl_global_sslset.3 +++ b/docs/libcurl/curl_global_sslset.3 @@ -84,7 +84,7 @@ support for choosing SSL backends at runtime. .SH RETURN VALUE If this function returns CURLSSLSET_OK, the backend was successfully selected. -If the chosen backend is unknown (or support for the chosed backend has not +If the chosen backend is unknown (or support for the chosen backend has not been compiled into libcurl), the function returns \fICURLSSLSET_UNKNOWN_BACKEND\fP. If the backend had been configured previously, or if \fIcurl_global_init(3)\fP diff --git a/docs/libcurl/curl_mime_data_cb.3 b/docs/libcurl/curl_mime_data_cb.3 index 105968a0e..8ce42c300 100644 --- a/docs/libcurl/curl_mime_data_cb.3 +++ b/docs/libcurl/curl_mime_data_cb.3 @@ -68,7 +68,7 @@ Your read function must then return the actual number of bytes that it stored in that memory area. Returning 0 will signal end-of-file to the library and cause it to stop the current transfer. -If you stop the current transfer by returning 0 "pre-maturely" (i.e before the +If you stop the current transfer by returning 0 "pre-maturely" (i.e. before the server expected it, like when you've said you will upload N bytes and you upload less than N bytes), you may experience that the server "hangs" waiting for the rest of the data that won't come. diff --git a/docs/libcurl/curl_mime_filedata.3 b/docs/libcurl/curl_mime_filedata.3 index c7b76371a..e22b5810d 100644 --- a/docs/libcurl/curl_mime_filedata.3 +++ b/docs/libcurl/curl_mime_filedata.3 @@ -30,7 +30,7 @@ curl_mime_filedata - set a mime part's body data from a file contents .ad .SH DESCRIPTION \fIcurl_mime_filedata(3)\fP sets a mime part's body content from the named -file's contents. This is an alernative to \fIcurl_mime_data(3)\fP for setting +file's contents. This is an alternative to \fIcurl_mime_data(3)\fP for setting data to a mime part. \fIpart\fP is the part's to assign contents to. diff --git a/docs/libcurl/curl_mime_type.3 b/docs/libcurl/curl_mime_type.3 index 59841d5bd..2f4bb7ed2 100644 --- a/docs/libcurl/curl_mime_type.3 +++ b/docs/libcurl/curl_mime_type.3 @@ -45,7 +45,7 @@ a default mime type is determined by the context: .br - If set as a custom header, use this value. .br -- application/form-data for a HTTP form post. +- application/form-data for an HTTP form post. .br - If a remote file name is set, the mime type is taken from the file name extension, or application/octet-stream by default. diff --git a/docs/libcurl/libcurl-env.3 b/docs/libcurl/libcurl-env.3 index 7bab37f5f..3807e662e 100644 --- a/docs/libcurl/libcurl-env.3 +++ b/docs/libcurl/libcurl-env.3 @@ -71,7 +71,7 @@ used to find the directory for NSS PKI database instead of the built-in. User name to use when invoking the ntlm-wb tool, if NTLMUSER and LOGNAME weren't set. .SH "Debug Variables" -There's a set of variables only recognized and used if libcurl was buillt +There's a set of variables only recognized and used if libcurl was built "debug enabled", which should never be true for a library used in production. .IP "CURL_GETHOSTNAME" Debug-only variable. diff --git a/docs/libcurl/libcurl-security.3 b/docs/libcurl/libcurl-security.3 index 377301ee0..25ae400fe 100644 --- a/docs/libcurl/libcurl-security.3 +++ b/docs/libcurl/libcurl-security.3 @@ -75,7 +75,7 @@ doesn't let snoopers see your password: Digest, CRAM-MD5, Kerberos, SPNEGO or NTLM authentication. Or even better: use authenticated protocols that protect the entire connection and everything sent over it. .SH "Un-authenticated Connections" -Protocols that don't have any form of cryptographic authentication can not +Protocols that don't have any form of cryptographic authentication cannot with any certainty know that they communicate with the right remote server. If your application is using a fixed scheme or fixed host name, it is not safe diff --git a/docs/libcurl/libcurl-tutorial.3 b/docs/libcurl/libcurl-tutorial.3 index 741e08e4b..dd5d27555 100644 --- a/docs/libcurl/libcurl-tutorial.3 +++ b/docs/libcurl/libcurl-tutorial.3 @@ -290,7 +290,7 @@ at least briefly. .SH "Upload Data to a Remote Site" libcurl tries to keep a protocol independent approach to most transfers, thus -uploading to a remote FTP site is very similar to uploading data to a HTTP +uploading to a remote FTP site is very similar to uploading data to an HTTP server with a PUT request. Of course, first you either create an easy handle or you re-use one existing @@ -517,7 +517,7 @@ and then a file with binary contents and uploads the whole thing. To post multiple files for a single form field, you must supply each file in a separate part, all with the same field name. Although function -\fIcurl_mime_subparts(3)\fP implements nested muti-parts, this way of +\fIcurl_mime_subparts(3)\fP implements nested multi-parts, this way of multiple files posting is deprecated by RFC 7578, chapter 4.3. To set the data source from an already opened FILE pointer, use: @@ -791,12 +791,12 @@ identified in the URL. If you're using a SOCKS proxy, you may find that libcurl doesn't quite support all operations through it. -For HTTP proxies: the fact that the proxy is a HTTP proxy puts certain +For HTTP proxies: the fact that the proxy is an HTTP proxy puts certain restrictions on what can actually happen. A requested URL that might not be a HTTP URL will be still be passed to the HTTP proxy to deliver back to libcurl. This happens transparently, and an application may not need to know. I say "may", because at times it is very important to understand that -all operations over a HTTP proxy use the HTTP protocol. For example, you +all operations over an HTTP proxy use the HTTP protocol. For example, you can't invoke your own custom FTP commands or even proper FTP directory listings. @@ -816,7 +816,7 @@ If you want to, you can specify the host name only in the \fICURLOPT_PROXYPORT(3)\fP. Tell libcurl what kind of proxy it is with \fICURLOPT_PROXYTYPE(3)\fP (if not, -it will default to assume a HTTP proxy): +it will default to assume an HTTP proxy): curl_easy_setopt(easyhandle, CURLOPT_PROXYTYPE, CURLPROXY_SOCKS4); @@ -852,11 +852,11 @@ variables, set the proxy name to "" - an empty string - with SSL is for secure point-to-point connections. This involves strong encryption and similar things, which effectively makes it impossible for a proxy to operate as a "man in between" which the proxy's task is, as previously -discussed. Instead, the only way to have SSL work over a HTTP proxy is to ask +discussed. Instead, the only way to have SSL work over an HTTP proxy is to ask the proxy to tunnel trough everything without being able to check or fiddle with the traffic. -Opening an SSL connection over a HTTP proxy is therefore a matter of asking the +Opening an SSL connection over an HTTP proxy is therefore a matter of asking the proxy for a straight connection to the target host on a specified port. This is made with the HTTP request CONNECT. ("please mr proxy, connect me to that remote host"). @@ -876,7 +876,7 @@ you or your application. As tunneling opens a direct connection from your application to the remote machine, it suddenly also re-introduces the ability to do non-HTTP -operations over a HTTP proxy. You can in fact use things such as FTP +operations over an HTTP proxy. You can in fact use things such as FTP upload or FTP custom commands this way. Again, this is often prevented by the administrators of proxies and is @@ -1056,7 +1056,7 @@ you can tell libcurl to use 1.0 instead by doing something like this: Not all protocols are HTTP-like, and thus the above may not help you when you want to make, for example, your FTP transfers to behave differently. -Sending custom commands to a FTP server means that you need to send the +Sending custom commands to an FTP server means that you need to send the commands exactly as the FTP server expects them (RFC959 is a good guide here), and you can only use commands that work on the control-connection alone. All kinds of commands that require data interchange and thus need @@ -1100,7 +1100,7 @@ combine with \fICURLOPT_NOBODY(3)\fP. If this option is set, no actual file content transfer will be performed. .IP "FTP Custom CUSTOMREQUEST" -If you do want to list the contents of a FTP directory using your own defined +If you do want to list the contents of an FTP directory using your own defined FTP command, \fICURLOPT_CUSTOMREQUEST(3)\fP will do just that. "NLST" is the default one for listing directories but you're free to pass in your idea of a good alternative. diff --git a/docs/libcurl/opts/CURLOPT_ACCEPT_ENCODING.3 b/docs/libcurl/opts/CURLOPT_ACCEPT_ENCODING.3 index 3a5fc166d..1e1f76f45 100644 --- a/docs/libcurl/opts/CURLOPT_ACCEPT_ENCODING.3 +++ b/docs/libcurl/opts/CURLOPT_ACCEPT_ENCODING.3 @@ -30,7 +30,7 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_ACCEPT_ENCODING, char *enc); .SH DESCRIPTION Pass a char * argument specifying what encoding you'd like. -Sets the contents of the Accept-Encoding: header sent in a HTTP request, and +Sets the contents of the Accept-Encoding: header sent in an HTTP request, and enables decoding of a response when a Content-Encoding: header is received. Three encodings are supported: \fIidentity\fP, meaning non-compressed, \fIdeflate\fP which requests the server to compress its response using the diff --git a/docs/libcurl/opts/CURLOPT_CONNECT_TO.3 b/docs/libcurl/opts/CURLOPT_CONNECT_TO.3 index 302502143..316a7d5fc 100644 --- a/docs/libcurl/opts/CURLOPT_CONNECT_TO.3 +++ b/docs/libcurl/opts/CURLOPT_CONNECT_TO.3 @@ -70,7 +70,7 @@ the port in the request URL, because connecting to the host and the port in the request URL is the default behavior. If an HTTP proxy is used for a request having a special "connect to" host or -port, and the "connect to" host or port differs from the requests's host and +port, and the "connect to" host or port differs from the request's host and port, the HTTP proxy is automatically switched to tunnel mode for this specific request. This is necessary because it is not possible to connect to a specific host or port in normal (non-tunnel) mode. diff --git a/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3 b/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3 index 33cce250b..93ccaf8dd 100644 --- a/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3 +++ b/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3 @@ -40,7 +40,7 @@ Restore to the internal default by setting this to NULL. This option can be used to specify the request: .IP HTTP Instead of GET or HEAD when performing HTTP based requests. This is -particularly useful, for example, for performing a HTTP DELETE request. +particularly useful, for example, for performing an HTTP DELETE request. For example: diff --git a/docs/libcurl/opts/CURLOPT_EXPECT_100_TIMEOUT_MS.3 b/docs/libcurl/opts/CURLOPT_EXPECT_100_TIMEOUT_MS.3 index af7f31fe0..2e2ccd1ba 100644 --- a/docs/libcurl/opts/CURLOPT_EXPECT_100_TIMEOUT_MS.3 +++ b/docs/libcurl/opts/CURLOPT_EXPECT_100_TIMEOUT_MS.3 @@ -32,7 +32,7 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_EXPECT_100_TIMEOUT_MS, .SH DESCRIPTION Pass a long to tell libcurl the number of \fImilliseconds\fP to wait for a server response with the HTTP status 100 (Continue), 417 (Expectation Failed) -or similar after sending a HTTP request containing an Expect: 100-continue +or similar after sending an HTTP request containing an Expect: 100-continue header. If this times out before a response is received, the request body is sent anyway. .SH DEFAULT diff --git a/docs/libcurl/opts/CURLOPT_FAILONERROR.3 b/docs/libcurl/opts/CURLOPT_FAILONERROR.3 index 451b07cad..107b28ef8 100644 --- a/docs/libcurl/opts/CURLOPT_FAILONERROR.3 +++ b/docs/libcurl/opts/CURLOPT_FAILONERROR.3 @@ -55,7 +55,7 @@ if(curl) { curl_easy_setopt(curl, CURLOPT_FAILONERROR, 1L); ret = curl_easy_perform(curl); if(ret == CURLE_HTTP_RETURNED_ERROR) { - /* a HTTP response error problem */ + /* an HTTP response error problem */ } } .fi diff --git a/docs/libcurl/opts/CURLOPT_FOLLOWLOCATION.3 b/docs/libcurl/opts/CURLOPT_FOLLOWLOCATION.3 index 094ee05d9..9b2d0be58 100644 --- a/docs/libcurl/opts/CURLOPT_FOLLOWLOCATION.3 +++ b/docs/libcurl/opts/CURLOPT_FOLLOWLOCATION.3 @@ -29,7 +29,7 @@ CURLOPT_FOLLOWLOCATION \- follow HTTP 3xx redirects CURLcode curl_easy_setopt(CURL *handle, CURLOPT_FOLLOWLOCATION, long enable); .SH DESCRIPTION A long parameter set to 1 tells the library to follow any Location: header -that the server sends as part of a HTTP header in a 3xx response. The +that the server sends as part of an HTTP header in a 3xx response. The Location: header can specify a relative or an absolute URL to follow. libcurl will issue another request for the new URL and follow new Location: diff --git a/docs/libcurl/opts/CURLOPT_HEADERFUNCTION.3 b/docs/libcurl/opts/CURLOPT_HEADERFUNCTION.3 index b27143ca8..6633dbad1 100644 --- a/docs/libcurl/opts/CURLOPT_HEADERFUNCTION.3 +++ b/docs/libcurl/opts/CURLOPT_HEADERFUNCTION.3 @@ -65,7 +65,7 @@ response, you will need to collect headers in the callback yourself and use HTTP status lines, for example, to delimit response boundaries. When a server sends a chunked encoded transfer, it may contain a trailer. That -trailer is identical to a HTTP header and if such a trailer is received it is +trailer is identical to an HTTP header and if such a trailer is received it is passed to the application using this callback as well. There are several ways to detect it being a trailer and not an ordinary header: 1) it comes after the response-body. 2) it comes after the final header line (CR LF) 3) a Trailer: diff --git a/docs/libcurl/opts/CURLOPT_HEADEROPT.3 b/docs/libcurl/opts/CURLOPT_HEADEROPT.3 index ff9070e74..b9a0075cc 100644 --- a/docs/libcurl/opts/CURLOPT_HEADEROPT.3 +++ b/docs/libcurl/opts/CURLOPT_HEADEROPT.3 @@ -44,7 +44,7 @@ headers. When doing CONNECT, libcurl will send \fICURLOPT_PROXYHEADER(3)\fP headers only to the proxy and then \fICURLOPT_HTTPHEADER(3)\fP headers only to the server. .SH DEFAULT -CURLHEADER_SEPARATE (changed in 7.42.1, ased CURLHEADER_UNIFIED before then) +CURLHEADER_SEPARATE (changed in 7.42.1, used CURLHEADER_UNIFIED before then) .SH PROTOCOLS HTTP .SH EXAMPLE diff --git a/docs/libcurl/opts/CURLOPT_HTTPAUTH.3 b/docs/libcurl/opts/CURLOPT_HTTPAUTH.3 index 8a5ae4143..09a9f996a 100644 --- a/docs/libcurl/opts/CURLOPT_HTTPAUTH.3 +++ b/docs/libcurl/opts/CURLOPT_HTTPAUTH.3 @@ -113,7 +113,7 @@ if(curl) { .SH AVAILABILITY Option Added in 7.10.6. -CURLAUTH_DIGEST_IE was added added in 7.19.3 +CURLAUTH_DIGEST_IE was added in 7.19.3 CURLAUTH_ONLY was added in 7.21.3 diff --git a/docs/libcurl/opts/CURLOPT_HTTPGET.3 b/docs/libcurl/opts/CURLOPT_HTTPGET.3 index 01de1f3cb..36995fb33 100644 --- a/docs/libcurl/opts/CURLOPT_HTTPGET.3 +++ b/docs/libcurl/opts/CURLOPT_HTTPGET.3 @@ -22,7 +22,7 @@ .\" .TH CURLOPT_HTTPGET 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options" .SH NAME -CURLOPT_HTTPGET \- ask for a HTTP GET request +CURLOPT_HTTPGET \- ask for an HTTP GET request .SH SYNOPSIS #include <curl/curl.h> diff --git a/docs/libcurl/opts/CURLOPT_HTTPPROXYTUNNEL.3 b/docs/libcurl/opts/CURLOPT_HTTPPROXYTUNNEL.3 index 5ded4d27a..46f9946d4 100644 --- a/docs/libcurl/opts/CURLOPT_HTTPPROXYTUNNEL.3 +++ b/docs/libcurl/opts/CURLOPT_HTTPPROXYTUNNEL.3 @@ -32,7 +32,7 @@ Set the \fBtunnel\fP parameter to 1L to make libcurl tunnel all operations through the HTTP proxy (set with \fICURLOPT_PROXY(3)\fP). There is a big difference between using a proxy and to tunnel through it. -Tunneling means that a HTTP CONNECT request is sent to the proxy, asking it +Tunneling means that an HTTP CONNECT request is sent to the proxy, asking it to connect to a remote host on a specific port number and then the traffic is just passed through the proxy. Proxies tend to white-list specific port numbers it allows CONNECT requests to and often only port 80 and 443 are allowed. @@ -43,7 +43,7 @@ To suppress proxy CONNECT response headers from user callbacks use HTTP proxies can generally only speak HTTP (for obvious reasons), which makes libcurl convert non-HTTP requests to HTTP when using an HTTP proxy without this tunnel option set. For example, asking for an FTP URL and specifying an -HTTP proxy will make libcurl send an FTP URL in a HTTP GET request to the +HTTP proxy will make libcurl send an FTP URL in an HTTP GET request to the proxy. By instead tunneling through the proxy, you avoid that conversion (that rarely works through the proxy anyway). .SH DEFAULT diff --git a/docs/libcurl/opts/CURLOPT_HTTP_VERSION.3 b/docs/libcurl/opts/CURLOPT_HTTP_VERSION.3 index e602b0311..232ed1cb9 100644 --- a/docs/libcurl/opts/CURLOPT_HTTP_VERSION.3 +++ b/docs/libcurl/opts/CURLOPT_HTTP_VERSION.3 @@ -72,7 +72,7 @@ if(curl) { curl_easy_setopt(curl, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_2TLS); ret = curl_easy_perform(curl); if(ret == CURLE_HTTP_RETURNED_ERROR) { - /* a HTTP response error problem */ + /* an HTTP response error problem */ } } .fi diff --git a/docs/libcurl/opts/CURLOPT_IOCTLFUNCTION.3 b/docs/libcurl/opts/CURLOPT_IOCTLFUNCTION.3 index d2917df26..fe1feec97 100644 --- a/docs/libcurl/opts/CURLOPT_IOCTLFUNCTION.3 +++ b/docs/libcurl/opts/CURLOPT_IOCTLFUNCTION.3 @@ -50,7 +50,7 @@ shown above. This callback function gets called by libcurl when something special I/O-related needs to be done that the library can't do by itself. For now, rewinding the read data stream is the only action it can request. The -rewinding of the read data stream may be necessary when doing a HTTP PUT or +rewinding of the read data stream may be necessary when doing an HTTP PUT or POST with a multi-pass authentication method. The callback MUST return \fICURLIOE_UNKNOWNCMD\fP if the input \fIcmd\fP is diff --git a/docs/libcurl/opts/CURLOPT_PATH_AS_IS.3 b/docs/libcurl/opts/CURLOPT_PATH_AS_IS.3 index 9b0d3d558..8ed23b450 100644 --- a/docs/libcurl/opts/CURLOPT_PATH_AS_IS.3 +++ b/docs/libcurl/opts/CURLOPT_PATH_AS_IS.3 @@ -56,7 +56,7 @@ if(curl) { } .fi .SH AVAILABILITY -Aded in 7.42.0 +Added in 7.42.0 .SH RETURN VALUE Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not. .SH "SEE ALSO" diff --git a/docs/libcurl/opts/CURLOPT_POST.3 b/docs/libcurl/opts/CURLOPT_POST.3 index 5e4f0409b..71bbd2eea 100644 --- a/docs/libcurl/opts/CURLOPT_POST.3 +++ b/docs/libcurl/opts/CURLOPT_POST.3 @@ -22,7 +22,7 @@ .\" .TH CURLOPT_POST 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options" .SH NAME -CURLOPT_POST \- request a HTTP POST +CURLOPT_POST \- request an HTTP POST .SH SYNOPSIS #include <curl/curl.h> @@ -51,7 +51,7 @@ with \fICURLOPT_HTTPHEADER(3)\fP. Using POST with HTTP 1.1 implies the use of a "Expect: 100-continue" header. You can disable this header with \fICURLOPT_HTTPHEADER(3)\fP as usual. -If you use POST to a HTTP 1.1 server, you can send data without knowing the +If you use POST to an HTTP 1.1 server, you can send data without knowing the size before starting the POST if you use chunked encoding. You enable this by adding a header like "Transfer-Encoding: chunked" with \fICURLOPT_HTTPHEADER(3)\fP. With HTTP 1.0 or without chunked transfer, you diff --git a/docs/libcurl/opts/CURLOPT_POSTFIELDS.3 b/docs/libcurl/opts/CURLOPT_POSTFIELDS.3 index 515376bab..285ab2551 100644 --- a/docs/libcurl/opts/CURLOPT_POSTFIELDS.3 +++ b/docs/libcurl/opts/CURLOPT_POSTFIELDS.3 @@ -28,7 +28,7 @@ CURLOPT_POSTFIELDS \- specify data to POST to server CURLcode curl_easy_setopt(CURL *handle, CURLOPT_POSTFIELDS, char *postdata); .SH DESCRIPTION -Pass a char * as parameter, pointing to the full data to send in a HTTP POST +Pass a char * as parameter, pointing to the full data to send in an HTTP POST operation. You must make sure that the data is formatted the way you want the server to receive it. libcurl will not convert or encode it for you in any way. For example, the web server may assume that this data is url-encoded. diff --git a/docs/libcurl/opts/CURLOPT_POSTREDIR.3 b/docs/libcurl/opts/CURLOPT_POSTREDIR.3 index 07aea6e61..62b6b5392 100644 --- a/docs/libcurl/opts/CURLOPT_POSTREDIR.3 +++ b/docs/libcurl/opts/CURLOPT_POSTREDIR.3 @@ -22,7 +22,7 @@ .\" .TH CURLOPT_POSTREDIR 3 "19 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options" .SH NAME -CURLOPT_POSTREDIR \- how to act on a HTTP POST redirect +CURLOPT_POSTREDIR \- how to act on an HTTP POST redirect .SH SYNOPSIS .nf #include <curl/curl.h> diff --git a/docs/libcurl/opts/CURLOPT_PROXY.3 b/docs/libcurl/opts/CURLOPT_PROXY.3 index 8e93309f1..ca7ae6936 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY.3 @@ -58,7 +58,7 @@ SOCKS5 Proxy. Proxy resolves URL hostname. Without a scheme prefix, \fICURLOPT_PROXYTYPE(3)\fP can be used to specify which kind of proxy the string identifies. -When you tell the library to use a HTTP proxy, libcurl will transparently +When you tell the library to use an HTTP proxy, libcurl will transparently convert operations to HTTP even if you specify an FTP URL etc. This may have an impact on what other features of the library you can use, such as \fICURLOPT_QUOTE(3)\fP and similar FTP specifics that don't work unless you diff --git a/docs/libcurl/opts/CURLOPT_PROXY_CAINFO.3 b/docs/libcurl/opts/CURLOPT_PROXY_CAINFO.3 index a5f61a5bd..79c28a634 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY_CAINFO.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY_CAINFO.3 @@ -28,7 +28,7 @@ CURLOPT_PROXY_CAINFO \- path to proxy Certificate Authority (CA) bundle CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PROXY_CAINFO, char *path); .SH DESCRIPTION -This option is for connecting to a HTTPS proxy, not a HTTPS server. +This option is for connecting to an HTTPS proxy, not an HTTPS server. Pass a char * to a zero terminated string naming a file holding one or more certificates to verify the HTTPS proxy with. @@ -60,7 +60,7 @@ Used with HTTPS proxy CURL *curl = curl_easy_init(); if(curl) { curl_easy_setopt(curl, CURLOPT_URL, "https://example.com/"); - /* using a HTTPS proxy */ + /* using an HTTPS proxy */ curl_easy_setopt(curl, CURLOPT_PROXY, "https://localhost:443"); curl_easy_setopt(curl, CURLOPT_PROXY_CAINFO, "/etc/certs/cabundle.pem"); ret = curl_easy_perform(curl); diff --git a/docs/libcurl/opts/CURLOPT_PROXY_CAPATH.3 b/docs/libcurl/opts/CURLOPT_PROXY_CAPATH.3 index 1e7345ed3..43bccd7bc 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY_CAPATH.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY_CAPATH.3 @@ -45,7 +45,7 @@ Everything used over an HTTPS proxy CURL *curl = curl_easy_init(); if(curl) { curl_easy_setopt(curl, CURLOPT_URL, "https://example.com/"); - /* using a HTTPS proxy */ + /* using an HTTPS proxy */ curl_easy_setopt(curl, CURLOPT_PROXY, "https://localhost:443"); curl_easy_setopt(curl, CURLOPT_PROXY_CAPATH, "/etc/cert-dir"); ret = curl_easy_perform(curl); diff --git a/docs/libcurl/opts/CURLOPT_PROXY_CRLFILE.3 b/docs/libcurl/opts/CURLOPT_PROXY_CRLFILE.3 index 310ad7a4e..68f396fd2 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY_CRLFILE.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY_CRLFILE.3 @@ -28,7 +28,7 @@ CURLOPT_PROXY_CRLFILE \- specify a proxy Certificate Revocation List file CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PROXY_CRLFILE, char *file); .SH DESCRIPTION -This option is for connecting to a HTTPS proxy, not a HTTPS server. +This option is for connecting to an HTTPS proxy, not an HTTPS server. Pass a char * to a zero terminated string naming a \fIfile\fP with the concatenation of CRL (in PEM format) to use in the certificate validation that diff --git a/docs/libcurl/opts/CURLOPT_PROXY_KEYPASSWD.3 b/docs/libcurl/opts/CURLOPT_PROXY_KEYPASSWD.3 index 594290274..694c0fe2a 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY_KEYPASSWD.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY_KEYPASSWD.3 @@ -28,7 +28,7 @@ CURLOPT_PROXY_KEYPASSWD \- set passphrase to proxy private key CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PROXY_KEYPASSWD, char *pwd); .SH DESCRIPTION -This option is for connecting to a HTTPS proxy, not a HTTPS server. +This option is for connecting to an HTTPS proxy, not an HTTPS server. Pass a pointer to a zero terminated string as parameter. It will be used as the password required to use the \fICURLOPT_PROXY_SSLKEY(3)\fP private key. diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SSLCERT.3 b/docs/libcurl/opts/CURLOPT_PROXY_SSLCERT.3 index 41e73190e..019f62873 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY_SSLCERT.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY_SSLCERT.3 @@ -28,7 +28,7 @@ CURLOPT_PROXY_SSLCERT \- set SSL proxy client certificate CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PROXY_SSLCERT, char *cert); .SH DESCRIPTION -This option is for connecting to a HTTPS proxy, not a HTTPS server. +This option is for connecting to an HTTPS proxy, not an HTTPS server. Pass a pointer to a zero terminated string as parameter. The string should be the file name of your client certificate used to connect to the HTTPS proxy. diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SSLCERTTYPE.3 b/docs/libcurl/opts/CURLOPT_PROXY_SSLCERTTYPE.3 index b8a6be0bb..fff12f805 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY_SSLCERTTYPE.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY_SSLCERTTYPE.3 @@ -29,7 +29,7 @@ CURLOPT_PROXY_SSLCERTTYPE \- specify type of the proxy client SSL certificate CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PROXY_SSLCERTTYPE, char *type); .SH DESCRIPTION Pass a pointer to a zero terminated string as parameter. The string should be -the format of your client certificate used when connecting to a HTTPS proxy. +the format of your client certificate used when connecting to an HTTPS proxy. Supported formats are "PEM" and "DER", except with Secure Transport. OpenSSL (versions 0.9.3 and later) and Secure Transport (on iOS 5 or later, or OS X diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SSLKEYTYPE.3 b/docs/libcurl/opts/CURLOPT_PROXY_SSLKEYTYPE.3 index 687c229a0..055d620eb 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY_SSLKEYTYPE.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY_SSLKEYTYPE.3 @@ -28,7 +28,7 @@ CURLOPT_PROXY_SSLKEYTYPE \- set type of the proxy private key file CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PROXY_SSLKEYTYPE, char *type); .SH DESCRIPTION -This option is for connecting to a HTTPS proxy, not a HTTPS server. +This option is for connecting to an HTTPS proxy, not an HTTPS server. Pass a pointer to a zero terminated string as parameter. The string should be the format of your private key. Supported formats are "PEM", "DER" and "ENG". diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SSL_VERIFYHOST.3 b/docs/libcurl/opts/CURLOPT_PROXY_SSL_VERIFYHOST.3 index de4b15b34..5ea7d20d4 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY_SSL_VERIFYHOST.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY_SSL_VERIFYHOST.3 @@ -56,7 +56,7 @@ overridden. .SH DEFAULT 2 .SH PROTOCOLS -All protocols when used over a HTTPS proxy. +All protocols when used over an HTTPS proxy. .SH EXAMPLE .nf CURL *curl = curl_easy_init(); diff --git a/docs/libcurl/opts/CURLOPT_PROXY_TRANSFER_MODE.3 b/docs/libcurl/opts/CURLOPT_PROXY_TRANSFER_MODE.3 index 06366490b..9060364fe 100644 --- a/docs/libcurl/opts/CURLOPT_PROXY_TRANSFER_MODE.3 +++ b/docs/libcurl/opts/CURLOPT_PROXY_TRANSFER_MODE.3 @@ -29,7 +29,7 @@ CURLOPT_PROXY_TRANSFER_MODE \- append FTP transfer mode to URL for proxy CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PROXY_TRANSFER_MODE, long enabled); .SH DESCRIPTION Pass a long. If the value is set to 1 (one), it tells libcurl to set the -transfer mode (binary or ASCII) for FTP transfers done via a HTTP proxy, by +transfer mode (binary or ASCII) for FTP transfers done via an HTTP proxy, by appending ;type=a or ;type=i to the URL. Without this setting, or it being set to 0 (zero, the default), \fICURLOPT_TRANSFERTEXT(3)\fP has no effect when doing FTP via a proxy. Beware that not all proxies support this feature. diff --git a/docs/libcurl/opts/CURLOPT_PUT.3 b/docs/libcurl/opts/CURLOPT_PUT.3 index 73f7e0a33..0753fad53 100644 --- a/docs/libcurl/opts/CURLOPT_PUT.3 +++ b/docs/libcurl/opts/CURLOPT_PUT.3 @@ -22,7 +22,7 @@ .\" .TH CURLOPT_PUT 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options" .SH NAME -CURLOPT_PUT \- make a HTTP PUT request +CURLOPT_PUT \- make an HTTP PUT request .SH SYNOPSIS #include <curl/curl.h> diff --git a/docs/libcurl/opts/CURLOPT_QUOTE.3 b/docs/libcurl/opts/CURLOPT_QUOTE.3 index e02d2c742..b547a1635 100644 --- a/docs/libcurl/opts/CURLOPT_QUOTE.3 +++ b/docs/libcurl/opts/CURLOPT_QUOTE.3 @@ -34,7 +34,7 @@ prior to your request. This will be done before any other commands are issued list of 'struct curl_slist' structs properly filled in with text strings. Use \fIcurl_slist_append(3)\fP to append strings (commands) to the list, and clear the entire list afterwards with \fIcurl_slist_free_all(3)\fP. Disable this -operation again by setting a NULL to this option. When speaking to a FTP +operation again by setting a NULL to this option. When speaking to an FTP server, prefix the command with an asterisk (*) to make libcurl continue even if the command fails as by default libcurl will stop at first failure. diff --git a/docs/libcurl/opts/CURLOPT_RTSP_CLIENT_CSEQ.3 b/docs/libcurl/opts/CURLOPT_RTSP_CLIENT_CSEQ.3 index c536e580d..3f86a3a82 100644 --- a/docs/libcurl/opts/CURLOPT_RTSP_CLIENT_CSEQ.3 +++ b/docs/libcurl/opts/CURLOPT_RTSP_CLIENT_CSEQ.3 @@ -28,7 +28,7 @@ CURLOPT_RTSP_CLIENT_CSEQ \- set the RTSP client CSEQ number CURLcode curl_easy_setopt(CURL *handle, CURLOPT_RTSP_CLIENT_CSEQ, long cseq); .SH DESCRIPTION -Pass a long to set the the CSEQ number to issue for the next RTSP +Pass a long to set the CSEQ number to issue for the next RTSP request. Useful if the application is resuming a previously broken connection. The CSEQ will increment from this new number henceforth. .SH DEFAULT diff --git a/docs/libcurl/opts/CURLOPT_RTSP_REQUEST.3 b/docs/libcurl/opts/CURLOPT_RTSP_REQUEST.3 index f8a662877..07ac517df 100644 --- a/docs/libcurl/opts/CURLOPT_RTSP_REQUEST.3 +++ b/docs/libcurl/opts/CURLOPT_RTSP_REQUEST.3 @@ -46,7 +46,7 @@ not needed for this method)\fP When sent by a client, this method changes the description of the session. For example, if a client is using the server to record a meeting, the client can use Announce to inform the server of all the meta-information about the -session. ANNOUNCE acts like a HTTP PUT or POST just like +session. ANNOUNCE acts like an HTTP PUT or POST just like \fICURL_RTSPREQ_SET_PARAMETER\fP .IP CURL_RTSPREQ_SETUP Setup is used to initialize the transport layer for the session. The @@ -68,16 +68,16 @@ different connections. .IP CURL_RTSPREQ_GET_PARAMETER Retrieve a parameter from the server. By default, libcurl will automatically include a \fIContent-Type: text/parameters\fP header on all non-empty requests -unless a custom one is set. GET_PARAMETER acts just like a HTTP PUT or POST +unless a custom one is set. GET_PARAMETER acts just like an HTTP PUT or POST (see \fICURL_RTSPREQ_SET_PARAMETER\fP). Applications wishing to send a heartbeat message (e.g. in the presence of a server-specified timeout) should send use an empty GET_PARAMETER request. .IP CURL_RTSPREQ_SET_PARAMETER Set a parameter on the server. By default, libcurl will automatically include a \fIContent-Type: text/parameters\fP header unless a custom one is set. The -interaction with SET_PARAMETER is much like a HTTP PUT or POST. An application +interaction with SET_PARAMETER is much like an HTTP PUT or POST. An application may either use \fICURLOPT_UPLOAD(3)\fP with \fICURLOPT_READDATA(3)\fP like a -HTTP PUT, or it may use \fICURLOPT_POSTFIELDS(3)\fP like a HTTP POST. No +HTTP PUT, or it may use \fICURLOPT_POSTFIELDS(3)\fP like an HTTP POST. No chunked transfers are allowed, so the application must set the \fICURLOPT_INFILESIZE(3)\fP in the former and \fICURLOPT_POSTFIELDSIZE(3)\fP in the latter. Also, there is no use of multi-part POSTs within RTSP. diff --git a/docs/libcurl/opts/CURLOPT_SEEKFUNCTION.3 b/docs/libcurl/opts/CURLOPT_SEEKFUNCTION.3 index 95780c872..205f59cb9 100644 --- a/docs/libcurl/opts/CURLOPT_SEEKFUNCTION.3 +++ b/docs/libcurl/opts/CURLOPT_SEEKFUNCTION.3 @@ -45,7 +45,7 @@ input stream and can be used to fast forward a file in a resumed upload (instead of reading all uploaded bytes with the normal read function/callback). It is also called to rewind a stream when data has already been sent to the server and needs to be sent again. This may happen when doing -a HTTP PUT or POST with a multi-pass authentication method, or when an +an HTTP PUT or POST with a multi-pass authentication method, or when an existing HTTP connection is reused too late and the server closes the connection. The function shall work like fseek(3) or lseek(3) and it gets SEEK_SET, SEEK_CUR or SEEK_END as argument for \fIorigin\fP, although libcurl diff --git a/docs/libcurl/opts/CURLOPT_SSL_CTX_FUNCTION.3 b/docs/libcurl/opts/CURLOPT_SSL_CTX_FUNCTION.3 index 929e0ee27..3a54ef36c 100644 --- a/docs/libcurl/opts/CURLOPT_SSL_CTX_FUNCTION.3 +++ b/docs/libcurl/opts/CURLOPT_SSL_CTX_FUNCTION.3 @@ -56,7 +56,7 @@ each time, but note the pointer may be the same as from a prior call. To use this properly, a non-trivial amount of knowledge of your SSL library is necessary. For example, you can use this function to call library-specific callbacks to add additional validation code for certificates, and even to -change the actual URI of a HTTPS request. +change the actual URI of an HTTPS request. .SH DEFAULT NULL .SH PROTOCOLS diff --git a/docs/libcurl/opts/CURLOPT_STREAM_DEPENDS_E.3 b/docs/libcurl/opts/CURLOPT_STREAM_DEPENDS_E.3 index dbaa55271..a0f59c43c 100644 --- a/docs/libcurl/opts/CURLOPT_STREAM_DEPENDS_E.3 +++ b/docs/libcurl/opts/CURLOPT_STREAM_DEPENDS_E.3 @@ -22,7 +22,7 @@ .\" .TH CURLOPT_STREAM_DEPENDS_E 3 "13 Sep 2015" "libcurl 7.46.0" "curl_easy_setopt options" .SH NAME -CURLOPT_STREAM_DEPENDS_E \- set stream this transfer depends on execlusively +CURLOPT_STREAM_DEPENDS_E \- set stream this transfer depends on exclusively .SH SYNOPSIS #include <curl/curl.h> diff --git a/docs/libcurl/opts/CURLOPT_STREAM_WEIGHT.3 b/docs/libcurl/opts/CURLOPT_STREAM_WEIGHT.3 index 14ec2c2dd..bc6d9fbe4 100644 --- a/docs/libcurl/opts/CURLOPT_STREAM_WEIGHT.3 +++ b/docs/libcurl/opts/CURLOPT_STREAM_WEIGHT.3 @@ -36,7 +36,7 @@ sense and is only usable when doing multiple streams over the same connections, which thus implies that you use \fICURLMOPT_PIPELINING(3)\fP. This option can be set during transfer and will then cause the updated weight -info get sent to the server the next time a HTTP/2 frame is sent to the +info get sent to the server the next time an HTTP/2 frame is sent to the server. See section 5.3 of RFC 7540 for protocol details: diff --git a/docs/libcurl/opts/CURLOPT_UNIX_SOCKET_PATH.3 b/docs/libcurl/opts/CURLOPT_UNIX_SOCKET_PATH.3 index 8cf4d24ea..b5ac58814 100644 --- a/docs/libcurl/opts/CURLOPT_UNIX_SOCKET_PATH.3 +++ b/docs/libcurl/opts/CURLOPT_UNIX_SOCKET_PATH.3 @@ -56,7 +56,7 @@ All protocols except for file:// and FTP are supported in theory. HTTP, IMAP, POP3 and SMTP should in particular work (including their SSL/TLS variants). .SH EXAMPLE Given that you have an nginx server running, listening on /tmp/nginx.sock, you -can request a HTTP resource with: +can request an HTTP resource with: .nf curl_easy_setopt(curl_handle, CURLOPT_UNIX_SOCKET_PATH, "/tmp/nginx.sock"); diff --git a/docs/libcurl/opts/CURLOPT_UPLOAD.3 b/docs/libcurl/opts/CURLOPT_UPLOAD.3 index 0ad201a1c..95088aa73 100644 --- a/docs/libcurl/opts/CURLOPT_UPLOAD.3 +++ b/docs/libcurl/opts/CURLOPT_UPLOAD.3 @@ -37,7 +37,7 @@ the PUT request unless you tell libcurl otherwise. Using PUT with HTTP 1.1 implies the use of a "Expect: 100-continue" header. You can disable this header with \fICURLOPT_HTTPHEADER(3)\fP as usual. -If you use PUT to a HTTP 1.1 server, you can upload data without knowing the +If you use PUT to an HTTP 1.1 server, you can upload data without knowing the size before starting the transfer if you use chunked encoding. You enable this by adding a header like "Transfer-Encoding: chunked" with \fICURLOPT_HTTPHEADER(3)\fP. With HTTP 1.0 or without chunked transfer, you diff --git a/docs/libcurl/opts/CURLOPT_URL.3 b/docs/libcurl/opts/CURLOPT_URL.3 index 879f18323..3f88c94b7 100644 --- a/docs/libcurl/opts/CURLOPT_URL.3 +++ b/docs/libcurl/opts/CURLOPT_URL.3 @@ -108,7 +108,7 @@ The path part of the URL is protocol specific and whilst some examples are given below this list is not conclusive: .IP HTTP -The path part of a HTTP request specifies the file to retrieve and from what +The path part of an HTTP request specifies the file to retrieve and from what directory. If the directory is not specified then the web server's root directory is used. If the file is omitted then the default document will be retrieved for either the directory specified or the root directory. The exact |