summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--tests/FILEFORMAT.md19
-rw-r--r--tests/data/test8427
-rw-r--r--tests/data/test8437
-rw-r--r--tests/data/test84412
-rw-r--r--tests/data/test8459
-rw-r--r--tests/data/test8879
-rw-r--r--tests/data/test8887
-rw-r--r--tests/data/test8899
-rw-r--r--tests/data/test8907
-rw-r--r--tests/data/test9469
-rw-r--r--tests/data/test9477
-rw-r--r--tests/data/test9489
-rw-r--r--tests/data/test9497
-rwxr-xr-xtests/ftpserver.pl30
-rwxr-xr-xtests/runtests.pl20
15 files changed, 77 insertions, 91 deletions
diff --git a/tests/FILEFORMAT.md b/tests/FILEFORMAT.md
index 0f5ae7f51..6f6e71bb7 100644
--- a/tests/FILEFORMAT.md
+++ b/tests/FILEFORMAT.md
@@ -21,6 +21,25 @@ variables are substituted by the their respective contents and the output
version of the test file is stored as `log/testNUM`. That version is what will
be read and used by the test servers.
+## Base64 Encoding
+
+In the preprocess stage, a special instruction can be used to have runtests.pl
+base64 encode a certain section and insert in the generated output file. This
+is in particular good for test cases where the test tool is expected to pass
+in base64 encoded content that might use dynamic information that is unique
+for this particular test invocation, like the server port number.
+
+To insert a base64 encoded string into the output, use this syntax:
+
+ %b64[ data to encode ]b64%
+
+The data to encode can then use any of the existing variables mentioned below,
+or even percent-encoded individual bytes. As an example, insert the HTTP
+server's port number (in ASCII) followed by a space and the hexadecimal byte
+9a:
+
+ %b64[%HTTPPORT %9a]b64%
+
# Variables
When the test is preprocessed, a range of "variables" in the test file will be
diff --git a/tests/data/test842 b/tests/data/test842
index 1d9181e17..2b5ae1c18 100644
--- a/tests/data/test842
+++ b/tests/data/test842
@@ -15,7 +15,7 @@ RFC7628
<servercmd>
AUTH OAUTHBEARER
REPLY AUTHENTICATE +
-REPLY bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMwFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ== A002 OK AUTHENTICATE completed
+REPLY %b64[n,a=user,%01host=127.0.0.1%01port=%IMAPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64% A002 OK AUTHENTICATE completed
</servercmd>
<data>
From: me@somewhere
@@ -42,9 +42,6 @@ IMAP OAuth 2.0 (OAUTHBEARER) authentication
</command>
# The protocol section doesn't support ways of specifying the raw data in the
# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%IMAPPORT' ne '9003' );"
-</precheck>
</client>
#
@@ -53,7 +50,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
<protocol>
A001 CAPABILITY
A002 AUTHENTICATE OAUTHBEARER
-bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMwFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+%b64[n,a=user,%01host=127.0.0.1%01port=%IMAPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
A003 SELECT 842
A004 FETCH 1 BODY[]
A005 LOGOUT
diff --git a/tests/data/test843 b/tests/data/test843
index bd39dd907..131188933 100644
--- a/tests/data/test843
+++ b/tests/data/test843
@@ -41,11 +41,6 @@ IMAP OAuth 2.0 (OAUTHBEARER) authentication with initial response
<command>
'imap://%HOSTIP:%IMAPPORT/843/;MAILINDEX=1' -u user --oauth2-bearer mF_9.B5f-4.1JqM
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%IMAPPORT' ne '9003' );"
-</precheck>
</client>
#
@@ -53,7 +48,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
<verify>
<protocol>
A001 CAPABILITY
-A002 AUTHENTICATE OAUTHBEARER bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMwFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+A002 AUTHENTICATE OAUTHBEARER %b64[n,a=user,%01host=127.0.0.1%01port=%IMAPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
A003 SELECT 843
A004 FETCH 1 BODY[]
A005 LOGOUT
diff --git a/tests/data/test844 b/tests/data/test844
index c5093d2b8..8573bc2fd 100644
--- a/tests/data/test844
+++ b/tests/data/test844
@@ -15,9 +15,7 @@ RFC7628
<servercmd>
AUTH OAUTHBEARER
REPLY AUTHENTICATE +
-REPLY bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMwFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ== +
-eyJzdGF0dXMiOiJpbnZhbGlkX3Rva2VuIiwic2NvcGUiOiJleGFtcGxlX3Njb3BlIiwib3BlbmlkLWNvbmZpZ3VyYXRpb24iOiJodHRwczovL2V4YW1wbGUuY29tLy53ZWxsLWtub3duL29wZW5pZC1jb25maWd1cmF0aW9uIn0=
-REPLY AQ== A002 NO Authentication failed
+REPLY %b64[n,a=user,%01host=127.0.0.1%01port=%IMAPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64% A002 NO Authentication failed
</servercmd>
</reply>
@@ -33,11 +31,6 @@ IMAP OAuth 2.0 (OAUTHBEARER) failure as continuation
<command>
'imap://%HOSTIP:%IMAPPORT/844/;MAILINDEX=1' -u user --oauth2-bearer mF_9.B5f-4.1JqM
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%IMAPPORT' ne '9003' );"
-</precheck>
</client>
#
@@ -53,8 +46,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
<protocol>
A001 CAPABILITY
A002 AUTHENTICATE OAUTHBEARER
-bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMwFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
-AQ==
+%b64[n,a=user,%01host=127.0.0.1%01port=%IMAPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
</protocol>
</verify>
</testcase>
diff --git a/tests/data/test845 b/tests/data/test845
index 70562c7ab..449eef353 100644
--- a/tests/data/test845
+++ b/tests/data/test845
@@ -33,11 +33,6 @@ IMAP OAuth 2.0 (OAUTHBEARER) failure as continuation with initial response
<command>
'imap://%HOSTIP:%IMAPPORT/845/;MAILINDEX=1' -u user --oauth2-bearer mF_9.B5f-4.1JqM
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%IMAPPORT' ne '9003' );"
-</precheck>
</client>
#
@@ -52,8 +47,8 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
# transfer and such a connection will not get a "LOGOUT"
<protocol>
A001 CAPABILITY
-A002 AUTHENTICATE OAUTHBEARER bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMwFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
-AQ==
+A002 AUTHENTICATE OAUTHBEARER %b64[n,a=user,%01host=127.0.0.1%01port=%IMAPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
+%b64[%01]b64%
</protocol>
</verify>
</testcase>
diff --git a/tests/data/test887 b/tests/data/test887
index 35419b502..ccf364955 100644
--- a/tests/data/test887
+++ b/tests/data/test887
@@ -17,7 +17,7 @@ RFC7628
<servercmd>
AUTH OAUTHBEARER
REPLY AUTH +
-REPLY bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ== +OK Login successful
+REPLY %b64[n,a=user,%01host=127.0.0.1%01port=%POP3PORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64% +OK Login successful
</servercmd>
<data>
From: me@somewhere
@@ -42,11 +42,6 @@ POP3 OAuth 2.0 (OAUTHBEARER) authentication
<command>
pop3://%HOSTIP:%POP3PORT/887 -u user --oauth2-bearer mF_9.B5f-4.1JqM
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%POP3PORT' ne '9001' );"
-</precheck>
</client>
#
@@ -55,7 +50,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
<protocol>
CAPA
AUTH OAUTHBEARER
-bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+%b64[n,a=user,%01host=127.0.0.1%01port=%POP3PORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
RETR 887
QUIT
</protocol>
diff --git a/tests/data/test888 b/tests/data/test888
index 78463feaa..465a2d0ce 100644
--- a/tests/data/test888
+++ b/tests/data/test888
@@ -42,11 +42,6 @@ POP3 OAuth 2.0 (OAUTHBEARER) authentication with initial response
<command>
pop3://%HOSTIP:%POP3PORT/888 -u user --oauth2-bearer mF_9.B5f-4.1JqM --sasl-ir
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%POP3PORT' ne '9001' );"
-</precheck>
</client>
#
@@ -54,7 +49,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
<verify>
<protocol>
CAPA
-AUTH OAUTHBEARER bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+AUTH OAUTHBEARER %b64[n,a=user,%01host=127.0.0.1%01port=%POP3PORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
RETR 888
QUIT
</protocol>
diff --git a/tests/data/test889 b/tests/data/test889
index 2edb371e9..9658d386c 100644
--- a/tests/data/test889
+++ b/tests/data/test889
@@ -17,7 +17,7 @@ RFC7628
<servercmd>
AUTH OAUTHBEARER
REPLY AUTH +
-REPLY bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ== + eyJzdGF0dXMiOiJpbnZhbGlkX3Rva2VuIiwic2NvcGUiOiJleGFtcGxlX3Njb3BlIiwib3BlbmlkLWNvbmZpZ3VyYXRpb24iOiJodHRwczovL2V4YW1wbGUuY29tLy53ZWxsLWtub3duL29wZW5pZC1jb25maWd1cmF0aW9uIn0
+REPLY %b64[n,a=user,%01host=127.0.0.1%01port=%POP3PORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64% + eyJzdGF0dXMiOiJpbnZhbGlkX3Rva2VuIiwic2NvcGUiOiJleGFtcGxlX3Njb3BlIiwib3BlbmlkLWNvbmZpZ3VyYXRpb24iOiJodHRwczovL2V4YW1wbGUuY29tLy53ZWxsLWtub3duL29wZW5pZC1jb25maWd1cmF0aW9uIn0
REPLY AQ== -ERR Authentication failed
</servercmd>
</reply>
@@ -34,11 +34,6 @@ POP3 OAuth 2.0 (OAUTHBEARER) failure as continuation
<command>
pop3://%HOSTIP:%POP3PORT/889 -u user --oauth2-bearer mF_9.B5f-4.1JqM
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%POP3PORT' ne '9001' );"
-</precheck>
</client>
#
@@ -54,7 +49,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
<protocol>
CAPA
AUTH OAUTHBEARER
-bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+%b64[n,a=user,%01host=127.0.0.1%01port=%POP3PORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
AQ==
</protocol>
</verify>
diff --git a/tests/data/test890 b/tests/data/test890
index ca0ccc7b5..4d6701ab0 100644
--- a/tests/data/test890
+++ b/tests/data/test890
@@ -34,11 +34,6 @@ POP3 OAuth 2.0 (OAUTHBEARER) failure as continuation with initial response
<command>
pop3://%HOSTIP:%POP3PORT/890 -u user --oauth2-bearer mF_9.B5f-4.1JqM --sasl-ir
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%POP3PORT' ne '9001' );"
-</precheck>
</client>
#
@@ -53,7 +48,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
# transfer and such a connection will not get a "QUIT"
<protocol>
CAPA
-AUTH OAUTHBEARER bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwMQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+AUTH OAUTHBEARER %b64[n,a=user,%01host=127.0.0.1%01port=%POP3PORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
AQ==
</protocol>
</verify>
diff --git a/tests/data/test946 b/tests/data/test946
index c6753dc1e..aa88364fa 100644
--- a/tests/data/test946
+++ b/tests/data/test946
@@ -16,7 +16,7 @@ RFC7628
<servercmd>
AUTH OAUTHBEARER
REPLY AUTH 334 OAUTHBEARER supported
-REPLY bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwNQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ== 235 Authenticated
+REPLY %b64[n,a=user,%01host=127.0.0.1%01port=%SMTPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64% 235 Authenticated
</servercmd>
</reply>
@@ -35,11 +35,6 @@ mail body
<command>
smtp://%HOSTIP:%SMTPPORT/946 --mail-rcpt recipient@example.com --mail-from sender@example.com -u user --oauth2-bearer mF_9.B5f-4.1JqM -T -
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%SMTPPORT' ne '9005' );"
-</precheck>
</client>
#
@@ -48,7 +43,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
<protocol>
EHLO 946
AUTH OAUTHBEARER
-bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwNQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+%b64[n,a=user,%01host=127.0.0.1%01port=%SMTPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
MAIL FROM:<sender@example.com>
RCPT TO:<recipient@example.com>
DATA
diff --git a/tests/data/test947 b/tests/data/test947
index 03c3fbe37..d2622be8d 100644
--- a/tests/data/test947
+++ b/tests/data/test947
@@ -35,11 +35,6 @@ mail body
<command>
smtp://%HOSTIP:%SMTPPORT/947 --mail-rcpt recipient@example.com --mail-from sender@example.com -u user --oauth2-bearer mF_9.B5f-4.1JqM --sasl-ir -T -
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%SMTPPORT' ne '9005' );"
-</precheck>
</client>
#
@@ -47,7 +42,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
<verify>
<protocol>
EHLO 947
-AUTH OAUTHBEARER bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwNQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+AUTH OAUTHBEARER %b64[n,a=user,%01host=127.0.0.1%01port=%SMTPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
MAIL FROM:<sender@example.com>
RCPT TO:<recipient@example.com>
DATA
diff --git a/tests/data/test948 b/tests/data/test948
index 8385f0cd2..a6eadf5fa 100644
--- a/tests/data/test948
+++ b/tests/data/test948
@@ -16,7 +16,7 @@ RFC7628
<servercmd>
AUTH OAUTHBEARER
REPLY AUTH 334 OAUTHBEARER supported
-REPLY bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwNQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ== 334 eyJzdGF0dXMiOiJpbnZhbGlkX3Rva2VuIiwic2NvcGUiOiJleGFtcGxlX3Njb3BlIiwib3BlbmlkLWNvbmZpZ3VyYXRpb24iOiJodHRwczovL2V4YW1wbGUuY29tLy53ZWxsLWtub3duL29wZW5pZC1jb25maWd1cmF0aW9uIn0
+REPLY %b64[n,a=user,%01host=127.0.0.1%01port=%SMTPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64% 334 eyJzdGF0dXMiOiJpbnZhbGlkX3Rva2VuIiwic2NvcGUiOiJleGFtcGxlX3Njb3BlIiwib3BlbmlkLWNvbmZpZ3VyYXRpb24iOiJodHRwczovL2V4YW1wbGUuY29tLy53ZWxsLWtub3duL29wZW5pZC1jb25maWd1cmF0aW9uIn0
REPLY AQ== 535 Username and Password not accepted. Learn more at\r\n535 http://support.example.com/mail/oauth
</servercmd>
</reply>
@@ -36,11 +36,6 @@ mail body
<command>
smtp://%HOSTIP:%SMTPPORT/948 --mail-rcpt recipient@example.com --mail-from sender@example.com -u user --oauth2-bearer mF_9.B5f-4.1JqM -T -
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%SMTPPORT' ne '9005' );"
-</precheck>
</client>
#
@@ -56,7 +51,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
<protocol>
EHLO 948
AUTH OAUTHBEARER
-bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwNQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+%b64[n,a=user,%01host=127.0.0.1%01port=%SMTPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
AQ==
</protocol>
</verify>
diff --git a/tests/data/test949 b/tests/data/test949
index 345940077..82064f19a 100644
--- a/tests/data/test949
+++ b/tests/data/test949
@@ -36,11 +36,6 @@ mail body
<command>
smtp://%HOSTIP:%SMTPPORT/949 --mail-rcpt recipient@example.com --mail-from sender@example.com -u user --oauth2-bearer mF_9.B5f-4.1JqM --sasl-ir -T -
</command>
-# The protocol section doesn't support ways of specifying the raw data in the
-# base64 encoded message so we must assert this
-<precheck>
-perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP' ne '127.0.0.1' || '%SMTPPORT' ne '9005' );"
-</precheck>
</client>
#
@@ -55,7 +50,7 @@ perl -e "print 'Test requires default test server host and port' if ( '%HOSTIP'
# transfer and such a connection will not get a "QUIT"
<protocol>
EHLO 949
-AUTH OAUTHBEARER bixhPXVzZXIsAWhvc3Q9MTI3LjAuMC4xAXBvcnQ9OTAwNQFhdXRoPUJlYXJlciBtRl85LkI1Zi00LjFKcU0BAQ==
+AUTH OAUTHBEARER %b64[n,a=user,%01host=127.0.0.1%01port=%SMTPPORT%01auth=Bearer mF_9.B5f-4.1JqM%01%01]b64%
AQ==
</protocol>
</verify>
diff --git a/tests/ftpserver.pl b/tests/ftpserver.pl
index a0b36e5de..d587f453e 100755
--- a/tests/ftpserver.pl
+++ b/tests/ftpserver.pl
@@ -83,6 +83,7 @@ my $proto = 'ftp'; # default server protocol
my $srcdir; # directory where ftpserver.pl is located
my $srvrname; # server name for presentation purposes
my $cwd_testno; # test case numbers extracted from CWD command
+my $testno = 0; # test case number (read from ftpserver.cmd)
my $path = '.';
my $logdir = $path .'/log';
@@ -449,17 +450,14 @@ sub startsf {
# Returns the given test's reply data
#
sub getreplydata {
- my ($testno) = @_;
+ my ($num) = @_;
my $testpart = "";
- $testno =~ s/^([^0-9]*)//;
- if($testno > 10000) {
- $testpart = $testno % 10000;
- $testno = int($testno / 10000);
+ $num =~ s/^([^0-9]*)//;
+ if($num > 10000) {
+ $testpart = $num % 10000;
}
- loadtest("$srcdir/data/test$testno");
-
my @data = getpart("reply", "data$testpart");
if((!@data) && ($testpart ne "")) {
@data = getpart("reply", "data");
@@ -2093,7 +2091,8 @@ my @ftpdir=("total 20\r\n",
logmsg "pass LIST data on data connection\n";
if($cwd_testno) {
- loadtest("$srcdir/data/test$cwd_testno");
+ loadtest("$logdir/test$cwd_testno") ||
+ loadtest("$srcdir/data/test$cwd_testno");
my @data = getpart("reply", "data");
for(@data) {
@@ -2156,7 +2155,8 @@ sub MDTM_ftp {
$testno = int($testno / 10000);
}
- loadtest("$srcdir/data/test$testno");
+ loadtest("$logdir/test$testno") ||
+ loadtest("$srcdir/data/test$testno");
my @data = getpart("reply", "mdtm");
@@ -2209,7 +2209,8 @@ sub SIZE_ftp {
$testno = int($testno / 10000);
}
- loadtest("$srcdir/data/test$testno");
+ loadtest("$logdir/test$testno") ||
+ loadtest("$srcdir/data/test$testno");
my @data = getpart("reply", "size");
@@ -2298,7 +2299,8 @@ sub RETR_ftp {
$testno = int($testno / 10000);
}
- loadtest("$srcdir/data/test$testno");
+ loadtest("$logdir/test$testno") ||
+ loadtest("$srcdir/data/test$testno");
my @data = getpart("reply", "data$testpart");
@@ -2881,6 +2883,10 @@ sub customize {
$nosave = 1;
logmsg "FTPD: NOSAVE prevents saving of uploaded data\n";
}
+ elsif($_ =~ /^Testnum (\d+)/){
+ $testno = $1;
+ logmsg "FTPD: run test case number: $testno\n";
+ }
}
close(CUSTOM);
}
@@ -3069,6 +3075,8 @@ while(1) {
$| = 1;
&customize(); # read test control instructions
+ loadtest("$logdir/test$testno") ||
+ loadtest("$srcdir/data/test$testno");
my $welcome = $commandreply{"welcome"};
if(!$welcome) {
diff --git a/tests/runtests.pl b/tests/runtests.pl
index cc70a1011..b25b3f456 100755
--- a/tests/runtests.pl
+++ b/tests/runtests.pl
@@ -76,6 +76,7 @@ use strict;
use warnings;
use Cwd;
use Digest::MD5 qw(md5);
+use MIME::Base64;
# Subs imported from serverhelp module
use serverhelp qw(
@@ -3338,6 +3339,20 @@ sub subVariables {
$$thing =~ s/${prefix}H2CVER/$h2cver/g;
}
+sub subBase64 {
+ my ($thing) = @_;
+
+ # cut out the base64 piece
+ if($$thing =~ s/%b64\[(.*)\]b64%/%%B64%%/i) {
+ my $d = $1;
+ # encode %NN characters
+ $d =~ s/%([0-9A-Fa-f]{2})/chr(hex($1))/eg;
+ my $enc = encode_base64($d, "");
+ # put the result into there
+ $$thing =~ s/%%B64%%/$enc/;
+ }
+}
+
sub fixarray {
my @in = @_;
@@ -3560,16 +3575,21 @@ sub singletest {
for my $s (@entiretest) {
my $f = $s;
subVariables(\$s, "%");
+ subBase64(\$s);
if($f ne $s) {
$diff++;
}
print D $s;
}
close(D);
+
# remove the separate test file again if nothing was updated to keep
# things simpler
unlink($otest) if(!$diff);
+ # in case the process changed the file, reload it
+ loadtest("log/test${testnum}") if($diff);
+
# timestamp required servers verification end
$timesrvrend{$testnum} = Time::HiRes::time();
View Lorry Controller Status