diff options
235 files changed, 289 insertions, 6 deletions
diff --git a/docs/cmdline-opts/abstract-unix-socket.d b/docs/cmdline-opts/abstract-unix-socket.d index 1fda4e5df..8403cab9d 100644 --- a/docs/cmdline-opts/abstract-unix-socket.d +++ b/docs/cmdline-opts/abstract-unix-socket.d @@ -3,6 +3,7 @@ Arg: <path> Help: Connect via abstract Unix domain socket Added: 7.53.0 Protocols: HTTP +Category: connection --- Connect through an abstract Unix domain socket, instead of using the network. Note: netstat shows the path of an abstract socket prefixed with '@', however diff --git a/docs/cmdline-opts/alt-svc.d b/docs/cmdline-opts/alt-svc.d index 15877a2fe..5598b59b4 100644 --- a/docs/cmdline-opts/alt-svc.d +++ b/docs/cmdline-opts/alt-svc.d @@ -3,6 +3,7 @@ Arg: <file name> Protocols: HTTPS Help: Enable alt-svc with this cache file Added: 7.64.1 +Category: http --- WARNING: this option is experimental. Do not use in production. diff --git a/docs/cmdline-opts/anyauth.d b/docs/cmdline-opts/anyauth.d index c32d1ed5e..bec0c0c86 100644 --- a/docs/cmdline-opts/anyauth.d +++ b/docs/cmdline-opts/anyauth.d @@ -2,6 +2,7 @@ Long: anyauth Help: Pick any authentication method Protocols: HTTP See-also: proxy-anyauth basic digest +Category: http proxy auth --- Tells curl to figure out authentication method by itself, and use the most secure one the remote site claims to support. This is done by first doing a diff --git a/docs/cmdline-opts/append.d b/docs/cmdline-opts/append.d index f001b1239..8bdb2594d 100644 --- a/docs/cmdline-opts/append.d +++ b/docs/cmdline-opts/append.d @@ -2,6 +2,7 @@ Short: a Long: append Help: Append to target file when uploading Protocols: FTP SFTP +Category: ftp sftp --- When used in an upload, this makes curl append to the target file instead of overwriting it. If the remote file doesn't exist, it will be created. Note diff --git a/docs/cmdline-opts/basic.d b/docs/cmdline-opts/basic.d index 09d42af9d..e222c51c1 100644 --- a/docs/cmdline-opts/basic.d +++ b/docs/cmdline-opts/basic.d @@ -2,6 +2,7 @@ Long: basic Help: Use HTTP Basic Authentication See-also: proxy-basic Protocols: HTTP +Category: auth --- Tells curl to use HTTP Basic authentication with the remote host. This is the default and this option is usually pointless, unless you use it to override a diff --git a/docs/cmdline-opts/cacert.d b/docs/cmdline-opts/cacert.d index 6a5678752..793d8c1ba 100644 --- a/docs/cmdline-opts/cacert.d +++ b/docs/cmdline-opts/cacert.d @@ -2,6 +2,7 @@ Long: cacert Arg: <file> Help: CA certificate to verify peer against Protocols: TLS +Category: tls --- Tells curl to use the specified certificate file to verify the peer. The file may contain multiple CA certificates. The certificate(s) must be in PEM diff --git a/docs/cmdline-opts/capath.d b/docs/cmdline-opts/capath.d index 0763f7a0d..4ce077a14 100644 --- a/docs/cmdline-opts/capath.d +++ b/docs/cmdline-opts/capath.d @@ -2,6 +2,7 @@ Long: capath Arg: <dir> Help: CA directory to verify peer against Protocols: TLS +Category: tls --- Tells curl to use the specified certificate directory to verify the peer. Multiple paths can be provided by separating them with ":" (e.g. diff --git a/docs/cmdline-opts/cert-status.d b/docs/cmdline-opts/cert-status.d index f1aaa2174..1342b092b 100644 --- a/docs/cmdline-opts/cert-status.d +++ b/docs/cmdline-opts/cert-status.d @@ -2,6 +2,7 @@ Long: cert-status Protocols: TLS Added: 7.41.0 Help: Verify the status of the server certificate +Category: tls --- Tells curl to verify the status of the server certificate by using the Certificate Status Request (aka. OCSP stapling) TLS extension. diff --git a/docs/cmdline-opts/cert-type.d b/docs/cmdline-opts/cert-type.d index 1232ec10d..b041bcb06 100644 --- a/docs/cmdline-opts/cert-type.d +++ b/docs/cmdline-opts/cert-type.d @@ -3,6 +3,7 @@ Protocols: TLS Arg: <type> Help: Certificate type (DER/PEM/ENG) See-also: cert key key-type +Category: tls --- Tells curl what type the provided client certificate is using. PEM, DER, ENG and P12 are recognized types. If not specified, PEM is assumed. diff --git a/docs/cmdline-opts/cert.d b/docs/cmdline-opts/cert.d index de6b42060..2938e571f 100644 --- a/docs/cmdline-opts/cert.d +++ b/docs/cmdline-opts/cert.d @@ -4,6 +4,7 @@ Arg: <certificate[:password]> Help: Client certificate file and password Protocols: TLS See-also: cert-type key key-type +Category: tls --- Tells curl to use the specified client certificate file when getting a file with HTTPS, FTPS or another SSL-based protocol. The certificate must be in diff --git a/docs/cmdline-opts/ciphers.d b/docs/cmdline-opts/ciphers.d index 69e85525a..ed7438a00 100644 --- a/docs/cmdline-opts/ciphers.d +++ b/docs/cmdline-opts/ciphers.d @@ -2,6 +2,7 @@ Long: ciphers Arg: <list of ciphers> Help: SSL ciphers to use Protocols: TLS +Category: tls --- Specifies which ciphers to use in the connection. The list of ciphers must specify valid ciphers. Read up on SSL cipher list details on this URL: diff --git a/docs/cmdline-opts/compressed-ssh.d b/docs/cmdline-opts/compressed-ssh.d index 583452ae4..849fe18b0 100644 --- a/docs/cmdline-opts/compressed-ssh.d +++ b/docs/cmdline-opts/compressed-ssh.d @@ -2,6 +2,7 @@ Long: compressed-ssh Help: Enable SSH compression Protocols: SCP SFTP Added: 7.56.0 +Category: scp ssh --- Enables built-in SSH compression. This is a request, not an order; the server may or may not do it. diff --git a/docs/cmdline-opts/compressed.d b/docs/cmdline-opts/compressed.d index 3aca92c32..26bc1514a 100644 --- a/docs/cmdline-opts/compressed.d +++ b/docs/cmdline-opts/compressed.d @@ -1,6 +1,7 @@ Long: compressed Help: Request compressed response Protocols: HTTP +Category: http --- Request a compressed response using one of the algorithms curl supports, and automatically decompress the content. Headers are not modified. diff --git a/docs/cmdline-opts/config.d b/docs/cmdline-opts/config.d index be46f7598..263467997 100644 --- a/docs/cmdline-opts/config.d +++ b/docs/cmdline-opts/config.d @@ -2,6 +2,7 @@ Long: config Arg: <file> Help: Read config from a file Short: K +Category: curl --- Specify a text file to read curl arguments from. The command line arguments diff --git a/docs/cmdline-opts/connect-timeout.d b/docs/cmdline-opts/connect-timeout.d index 3a32d8685..fa3277221 100644 --- a/docs/cmdline-opts/connect-timeout.d +++ b/docs/cmdline-opts/connect-timeout.d @@ -2,6 +2,7 @@ Long: connect-timeout Arg: <seconds> Help: Maximum time allowed for connection See-also: max-time +Category: connection --- Maximum time in seconds that you allow curl's connection to take. This only limits the connection phase, so if curl connects within the given period it diff --git a/docs/cmdline-opts/connect-to.d b/docs/cmdline-opts/connect-to.d index 458bfe855..2f015f8ac 100644 --- a/docs/cmdline-opts/connect-to.d +++ b/docs/cmdline-opts/connect-to.d @@ -3,6 +3,7 @@ Arg: <HOST1:PORT1:HOST2:PORT2> Help: Connect to host Added: 7.49.0 See-also: resolve header +Category: connection --- For a request to the given HOST1:PORT1 pair, connect to HOST2:PORT2 instead. diff --git a/docs/cmdline-opts/continue-at.d b/docs/cmdline-opts/continue-at.d index 733f4941e..c44d2f496 100644 --- a/docs/cmdline-opts/continue-at.d +++ b/docs/cmdline-opts/continue-at.d @@ -3,6 +3,7 @@ Long: continue-at Arg: <offset> Help: Resumed transfer offset See-also: range +Category: connection --- Continue/Resume a previous file transfer at the given offset. The given offset is the exact number of bytes that will be skipped, counting from the beginning diff --git a/docs/cmdline-opts/cookie-jar.d b/docs/cmdline-opts/cookie-jar.d index da79777eb..f11991f4e 100644 --- a/docs/cmdline-opts/cookie-jar.d +++ b/docs/cmdline-opts/cookie-jar.d @@ -3,6 +3,7 @@ Long: cookie-jar Arg: <filename> Protocols: HTTP Help: Write cookies to <filename> after operation +Category: http --- Specify to which file you want curl to write all cookies after a completed operation. Curl writes all cookies from its in-memory cookie storage to the diff --git a/docs/cmdline-opts/cookie.d b/docs/cmdline-opts/cookie.d index 467e05663..5d2c9d783 100644 --- a/docs/cmdline-opts/cookie.d +++ b/docs/cmdline-opts/cookie.d @@ -3,6 +3,7 @@ Long: cookie Arg: <data|filename> Protocols: HTTP Help: Send cookies from string/file +Category: http --- Pass the data to the HTTP server in the Cookie header. It is supposedly the data previously received from the server in a "Set-Cookie:" line. The diff --git a/docs/cmdline-opts/create-dirs.d b/docs/cmdline-opts/create-dirs.d index b09d96ca7..48a8fd466 100644 --- a/docs/cmdline-opts/create-dirs.d +++ b/docs/cmdline-opts/create-dirs.d @@ -1,5 +1,6 @@ Long: create-dirs Help: Create necessary local directory hierarchy +Category: curl --- When used in conjunction with the --output option, curl will create the necessary local directory hierarchy as needed. This option creates the dirs diff --git a/docs/cmdline-opts/crlf.d b/docs/cmdline-opts/crlf.d index f6694b654..50c4bef81 100644 --- a/docs/cmdline-opts/crlf.d +++ b/docs/cmdline-opts/crlf.d @@ -1,6 +1,7 @@ Long: crlf Help: Convert LF to CRLF in upload Protocols: FTP SMTP +Category: ftp smtp --- Convert LF to CRLF in upload. Useful for MVS (OS/390). diff --git a/docs/cmdline-opts/crlfile.d b/docs/cmdline-opts/crlfile.d index 0fcc63c85..360e668d1 100644 --- a/docs/cmdline-opts/crlfile.d +++ b/docs/cmdline-opts/crlfile.d @@ -3,6 +3,7 @@ Arg: <file> Protocols: TLS Help: Get a CRL list in PEM format from the given file Added: 7.19.7 +Category: tls --- Provide a file using PEM format with a Certificate Revocation List that may specify peer certificates that are to be considered revoked. diff --git a/docs/cmdline-opts/curves.d b/docs/cmdline-opts/curves.d index 03264c05a..47870a278 100644 --- a/docs/cmdline-opts/curves.d +++ b/docs/cmdline-opts/curves.d @@ -3,6 +3,7 @@ Arg: <algorithm list> Help: (EC) TLS key exchange algorithm(s) to request Protocols: TLS Added: 7.73.0 +Category: tls --- Tells curl to request specific curves to use during SSL session establishment according to RFC 8422, 5.1. Multiple algorithms can be provided by separating diff --git a/docs/cmdline-opts/data-ascii.d b/docs/cmdline-opts/data-ascii.d index bda4abc3d..3522f6345 100644 --- a/docs/cmdline-opts/data-ascii.d +++ b/docs/cmdline-opts/data-ascii.d @@ -2,5 +2,6 @@ Long: data-ascii Arg: <data> Help: HTTP POST ASCII data Protocols: HTTP +Category: http post upload --- This is just an alias for --data. diff --git a/docs/cmdline-opts/data-binary.d b/docs/cmdline-opts/data-binary.d index 3f6ff2dbd..c40785ece 100644 --- a/docs/cmdline-opts/data-binary.d +++ b/docs/cmdline-opts/data-binary.d @@ -2,6 +2,7 @@ Long: data-binary Arg: <data> Help: HTTP POST binary data Protocols: HTTP +Category: http post upload --- This posts data exactly as specified with no extra processing whatsoever. diff --git a/docs/cmdline-opts/data-raw.d b/docs/cmdline-opts/data-raw.d index 7669b4abf..4db83aefa 100644 --- a/docs/cmdline-opts/data-raw.d +++ b/docs/cmdline-opts/data-raw.d @@ -4,6 +4,7 @@ Protocols: HTTP Help: HTTP POST data, '@' allowed Added: 7.43.0 See-also: data +Category: http post upload --- This posts data similarly to --data but without the special interpretation of the @ character. diff --git a/docs/cmdline-opts/data-urlencode.d b/docs/cmdline-opts/data-urlencode.d index 9873f3356..2f2a3645b 100644 --- a/docs/cmdline-opts/data-urlencode.d +++ b/docs/cmdline-opts/data-urlencode.d @@ -4,6 +4,7 @@ Help: HTTP POST data url encoded Protocols: HTTP See-also: data data-raw Added: 7.18.0 +Category: http post upload --- This posts data, similar to the other --data options with the exception that this performs URL-encoding. diff --git a/docs/cmdline-opts/data.d b/docs/cmdline-opts/data.d index 280d38bc0..53ba86b36 100644 --- a/docs/cmdline-opts/data.d +++ b/docs/cmdline-opts/data.d @@ -5,6 +5,7 @@ Help: HTTP POST data Protocols: HTTP MQTT See-also: data-binary data-urlencode data-raw Mutexed: form head upload-file +Category: important http post upload --- Sends the specified data in a POST request to the HTTP server, in the same way that a browser does when a user has filled in an HTML form and presses the diff --git a/docs/cmdline-opts/delegation.d b/docs/cmdline-opts/delegation.d index 138d82333..64b9f7500 100644 --- a/docs/cmdline-opts/delegation.d +++ b/docs/cmdline-opts/delegation.d @@ -2,6 +2,7 @@ Long: delegation Arg: <LEVEL> Help: GSS-API delegation permission Protocols: GSS/kerberos +Category: misc --- Set LEVEL to tell the server what it is allowed to delegate when it comes to user credentials. diff --git a/docs/cmdline-opts/digest.d b/docs/cmdline-opts/digest.d index 5cdd9258a..da8c01e26 100644 --- a/docs/cmdline-opts/digest.d +++ b/docs/cmdline-opts/digest.d @@ -3,6 +3,7 @@ Help: Use HTTP Digest Authentication Protocols: HTTP Mutexed: basic ntlm negotiate See-also: user proxy-digest anyauth +Category: proxy auth http --- Enables HTTP Digest authentication. This is an authentication scheme that prevents the password from being sent over the wire in clear text. Use this in diff --git a/docs/cmdline-opts/disable-eprt.d b/docs/cmdline-opts/disable-eprt.d index a1e53c0bd..ffcf684e4 100644 --- a/docs/cmdline-opts/disable-eprt.d +++ b/docs/cmdline-opts/disable-eprt.d @@ -1,6 +1,7 @@ Long: disable-eprt Help: Inhibit using EPRT or LPRT Protocols: FTP +Category: ftp --- Tell curl to disable the use of the EPRT and LPRT commands when doing active FTP transfers. Curl will normally always first attempt to use EPRT, then LPRT diff --git a/docs/cmdline-opts/disable-epsv.d b/docs/cmdline-opts/disable-epsv.d index 6d2cb7089..df1de8304 100644 --- a/docs/cmdline-opts/disable-epsv.d +++ b/docs/cmdline-opts/disable-epsv.d @@ -1,6 +1,7 @@ Long: disable-epsv Help: Inhibit using EPSV Protocols: FTP +Category: ftp --- (FTP) Tell curl to disable the use of the EPSV command when doing passive FTP transfers. Curl will normally always first attempt to use EPSV before PASV, diff --git a/docs/cmdline-opts/disable.d b/docs/cmdline-opts/disable.d index 20b27b4c5..688fc0c54 100644 --- a/docs/cmdline-opts/disable.d +++ b/docs/cmdline-opts/disable.d @@ -1,6 +1,7 @@ Long: disable Short: q Help: Disable .curlrc +Category: curl --- If used as the first parameter on the command line, the \fIcurlrc\fP config file will not be read and used. See the --config for details on the default diff --git a/docs/cmdline-opts/disallow-username-in-url.d b/docs/cmdline-opts/disallow-username-in-url.d index a7f46ea15..e124f675a 100644 --- a/docs/cmdline-opts/disallow-username-in-url.d +++ b/docs/cmdline-opts/disallow-username-in-url.d @@ -3,5 +3,6 @@ Help: Disallow username in url Protocols: HTTP Added: 7.61.0 See-also: proto +Category: curl http --- This tells curl to exit if passed a url containing a username. diff --git a/docs/cmdline-opts/dns-interface.d b/docs/cmdline-opts/dns-interface.d index 45e5af263..3cb818ae3 100644 --- a/docs/cmdline-opts/dns-interface.d +++ b/docs/cmdline-opts/dns-interface.d @@ -5,6 +5,7 @@ Protocols: DNS See-also: dns-ipv4-addr dns-ipv6-addr Added: 7.33.0 Requires: c-ares +Category: dns --- Tell curl to send outgoing DNS requests through <interface>. This option is a counterpart to --interface (which does not affect DNS). The supplied string diff --git a/docs/cmdline-opts/dns-ipv4-addr.d b/docs/cmdline-opts/dns-ipv4-addr.d index 597b85884..5ebdda5ca 100644 --- a/docs/cmdline-opts/dns-ipv4-addr.d +++ b/docs/cmdline-opts/dns-ipv4-addr.d @@ -5,6 +5,7 @@ Protocols: DNS See-also: dns-interface dns-ipv6-addr Added: 7.33.0 Requires: c-ares +Category: dns --- Tell curl to bind to <ip-address> when making IPv4 DNS requests, so that the DNS requests originate from this address. The argument should be a diff --git a/docs/cmdline-opts/dns-ipv6-addr.d b/docs/cmdline-opts/dns-ipv6-addr.d index 581f01953..10e807646 100644 --- a/docs/cmdline-opts/dns-ipv6-addr.d +++ b/docs/cmdline-opts/dns-ipv6-addr.d @@ -5,6 +5,7 @@ Protocols: DNS See-also: dns-interface dns-ipv4-addr Added: 7.33.0 Requires: c-ares +Category: dns --- Tell curl to bind to <ip-address> when making IPv6 DNS requests, so that the DNS requests originate from this address. The argument should be a diff --git a/docs/cmdline-opts/dns-servers.d b/docs/cmdline-opts/dns-servers.d index a98fd07d8..8665426a8 100644 --- a/docs/cmdline-opts/dns-servers.d +++ b/docs/cmdline-opts/dns-servers.d @@ -3,6 +3,7 @@ Arg: <addresses> Help: DNS server addrs to use Requires: c-ares Added: 7.33.0 +Category: dns --- Set the list of DNS servers to be used instead of the system default. The list of IP addresses should be separated with commas. Port numbers diff --git a/docs/cmdline-opts/doh-url.d b/docs/cmdline-opts/doh-url.d index c871c4d22..7fce4460d 100644 --- a/docs/cmdline-opts/doh-url.d +++ b/docs/cmdline-opts/doh-url.d @@ -3,6 +3,7 @@ Arg: <URL> Help: Resolve host names over DOH Protocols: all Added: 7.62.0 +Category: dns --- Specifies which DNS-over-HTTPS (DOH) server to use to resolve hostnames, instead of using the default name resolver mechanism. The URL must be HTTPS. diff --git a/docs/cmdline-opts/dump-header.d b/docs/cmdline-opts/dump-header.d index 33c6674e8..8449dfe85 100644 --- a/docs/cmdline-opts/dump-header.d +++ b/docs/cmdline-opts/dump-header.d @@ -4,6 +4,7 @@ Arg: <filename> Help: Write the received headers to <filename> Protocols: HTTP FTP See-also: output +Category: http ftp --- Write the received protocol headers to the specified file. diff --git a/docs/cmdline-opts/egd-file.d b/docs/cmdline-opts/egd-file.d index c22790f6a..05ede9ad1 100644 --- a/docs/cmdline-opts/egd-file.d +++ b/docs/cmdline-opts/egd-file.d @@ -3,6 +3,7 @@ Arg: <file> Help: EGD socket path for random data Protocols: TLS See-also: random-file +Category: tls --- Specify the path name to the Entropy Gathering Daemon socket. The socket is used to seed the random engine for SSL connections. diff --git a/docs/cmdline-opts/engine.d b/docs/cmdline-opts/engine.d index cde1a4773..9ed0cf1b0 100644 --- a/docs/cmdline-opts/engine.d +++ b/docs/cmdline-opts/engine.d @@ -2,6 +2,7 @@ Long: engine Arg: <name> Help: Crypto engine to use Protocols: TLS +Category: tls --- Select the OpenSSL crypto engine to use for cipher operations. Use --engine list to print a list of build-time supported engines. Note that not all (or diff --git a/docs/cmdline-opts/etag-compare.d b/docs/cmdline-opts/etag-compare.d index 1a698a8ff..cbf48ac5e 100644 --- a/docs/cmdline-opts/etag-compare.d +++ b/docs/cmdline-opts/etag-compare.d @@ -3,6 +3,7 @@ Arg: <file> Help: Pass an ETag from a file as a custom header Protocols: HTTP Added: 7.68.0 +Category: http --- This option makes a conditional HTTP request for the specific ETag read from the given file by sending a custom If-None-Match diff --git a/docs/cmdline-opts/etag-save.d b/docs/cmdline-opts/etag-save.d index 214723ff5..82e6dfa84 100644 --- a/docs/cmdline-opts/etag-save.d +++ b/docs/cmdline-opts/etag-save.d @@ -3,6 +3,7 @@ Arg: <file> Help: Parse ETag from a request and save it to a file Protocols: HTTP Added: 7.68.0 +Category: http --- This option saves an HTTP ETag to the specified file. Etag is usually part of headers returned by a request. When server sends an diff --git a/docs/cmdline-opts/expect100-timeout.d b/docs/cmdline-opts/expect100-timeout.d index c88f0b84f..431a529c2 100644 --- a/docs/cmdline-opts/expect100-timeout.d +++ b/docs/cmdline-opts/expect100-timeout.d @@ -4,6 +4,7 @@ Help: How long to wait for 100-continue Protocols: HTTP Added: 7.47.0 See-also: connect-timeout +Category: http --- Maximum time in seconds that you allow curl to wait for a 100-continue response when curl emits an Expects: 100-continue header in its request. By diff --git a/docs/cmdline-opts/fail-early.d b/docs/cmdline-opts/fail-early.d index 375d4c919..3fbe238af 100644 --- a/docs/cmdline-opts/fail-early.d +++ b/docs/cmdline-opts/fail-early.d @@ -1,6 +1,7 @@ Long: fail-early Help: Fail on first transfer error, do not continue Added: 7.52.0 +Category: curl --- Fail and exit on the first detected transfer error. diff --git a/docs/cmdline-opts/fail.d b/docs/cmdline-opts/fail.d index c46c571bf..7fc76fb6a 100644 --- a/docs/cmdline-opts/fail.d +++ b/docs/cmdline-opts/fail.d @@ -2,6 +2,7 @@ Long: fail Short: f Protocols: HTTP Help: Fail silently (no output at all) on HTTP errors +Category: important http --- Fail silently (no output at all) on server errors. This is mostly done to better enable scripts etc to better deal with failed attempts. In normal cases diff --git a/docs/cmdline-opts/false-start.d b/docs/cmdline-opts/false-start.d index 65a8afb8f..abeff0eb5 100644 --- a/docs/cmdline-opts/false-start.d +++ b/docs/cmdline-opts/false-start.d @@ -2,6 +2,7 @@ Long: false-start Help: Enable TLS False Start Protocols: TLS Added: 7.42.0 +Category: tls --- Tells curl to use false start during the TLS handshake. False start is a mode where a TLS client will start sending application data before verifying the diff --git a/docs/cmdline-opts/form-string.d b/docs/cmdline-opts/form-string.d index 49d0d44ef..04d2578c5 100644 --- a/docs/cmdline-opts/form-string.d +++ b/docs/cmdline-opts/form-string.d @@ -3,6 +3,7 @@ Help: Specify multipart MIME data Protocols: HTTP SMTP IMAP Arg: <name=string> See-also: form +Category: http upload --- Similar to --form except that the value string for the named parameter is used literally. Leading \&'@' and \&'<' characters, and the \&';type=' string in diff --git a/docs/cmdline-opts/form.d b/docs/cmdline-opts/form.d index 7f1aa31c3..3cd8dce75 100644 --- a/docs/cmdline-opts/form.d +++ b/docs/cmdline-opts/form.d @@ -4,6 +4,7 @@ Arg: <name=content> Help: Specify multipart MIME data Protocols: HTTP SMTP IMAP Mutexed: data head upload-file +Category: http upload --- For HTTP protocol family, this lets curl emulate a filled-in form in which a user has pressed the submit button. This causes curl to POST data using the diff --git a/docs/cmdline-opts/ftp-account.d b/docs/cmdline-opts/ftp-account.d index 013c4f37b..bc04ba047 100644 --- a/docs/cmdline-opts/ftp-account.d +++ b/docs/cmdline-opts/ftp-account.d @@ -3,6 +3,7 @@ Arg: <data> Help: Account data string Protocols: FTP Added: 7.13.0 +Category: ftp auth --- When an FTP server asks for "account data" after user name and password has been provided, this data is sent off using the ACCT command. diff --git a/docs/cmdline-opts/ftp-alternative-to-user.d b/docs/cmdline-opts/ftp-alternative-to-user.d index 8982ba8b8..171484906 100644 --- a/docs/cmdline-opts/ftp-alternative-to-user.d +++ b/docs/cmdline-opts/ftp-alternative-to-user.d @@ -3,6 +3,7 @@ Arg: <command> Help: String to replace USER [name] Protocols: FTP Added: 7.15.5 +Category: ftp --- If authenticating with the USER and PASS commands fails, send this command. When connecting to Tumbleweed's Secure Transport server over FTPS using a diff --git a/docs/cmdline-opts/ftp-create-dirs.d b/docs/cmdline-opts/ftp-create-dirs.d index ede57100d..5d9dfda46 100644 --- a/docs/cmdline-opts/ftp-create-dirs.d +++ b/docs/cmdline-opts/ftp-create-dirs.d @@ -2,6 +2,7 @@ Long: ftp-create-dirs Protocols: FTP SFTP Help: Create the remote dirs if not present See-also: create-dirs +Category: ftp sftp curl --- When an FTP or SFTP URL/operation uses a path that doesn't currently exist on the server, the standard behavior of curl is to fail. Using this option, curl diff --git a/docs/cmdline-opts/ftp-method.d b/docs/cmdline-opts/ftp-method.d index 95aa522e8..149340b82 100644 --- a/docs/cmdline-opts/ftp-method.d +++ b/docs/cmdline-opts/ftp-method.d @@ -3,6 +3,7 @@ Arg: <method> Help: Control CWD usage Protocols: FTP Added: 7.15.1 +Category: ftp --- Control what method curl should use to reach a file on an FTP(S) server. The method argument should be one of the following alternatives: diff --git a/docs/cmdline-opts/ftp-pasv.d b/docs/cmdline-opts/ftp-pasv.d index 44103e21a..cbd548de3 100644 --- a/docs/cmdline-opts/ftp-pasv.d +++ b/docs/cmdline-opts/ftp-pasv.d @@ -3,6 +3,7 @@ Help: Use PASV/EPSV instead of PORT Protocols: FTP Added: 7.11.0 See-also: disable-epsv +Category: ftp --- Use passive mode for the data connection. Passive is the internal default behavior, but using this option can be used to override a previous --ftp-port diff --git a/docs/cmdline-opts/ftp-port.d b/docs/cmdline-opts/ftp-port.d index e4b145608..9bb1d43f0 100644 --- a/docs/cmdline-opts/ftp-port.d +++ b/docs/cmdline-opts/ftp-port.d @@ -4,6 +4,7 @@ Help: Use PORT instead of PASV Short: P Protocols: FTP See-also: ftp-pasv disable-eprt +Category: ftp --- Reverses the default initiator/listener roles when connecting with FTP. This option makes curl use active mode. curl then tells the server to connect back diff --git a/docs/cmdline-opts/ftp-pret.d b/docs/cmdline-opts/ftp-pret.d index dac4c3531..e9c7d251a 100644 --- a/docs/cmdline-opts/ftp-pret.d +++ b/docs/cmdline-opts/ftp-pret.d @@ -2,6 +2,7 @@ Long: ftp-pret Help: Send PRET before PASV Protocols: FTP Added: 7.20.0 +Category: ftp --- Tell curl to send a PRET command before PASV (and EPSV). Certain FTP servers, mainly drftpd, require this non-standard command for directory listings as diff --git a/docs/cmdline-opts/ftp-skip-pasv-ip.d b/docs/cmdline-opts/ftp-skip-pasv-ip.d index da6ab11fc..d6fd4589b 100644 --- a/docs/cmdline-opts/ftp-skip-pasv-ip.d +++ b/docs/cmdline-opts/ftp-skip-pasv-ip.d @@ -3,6 +3,7 @@ Help: Skip the IP address for PASV Protocols: FTP Added: 7.14.2 See-also: ftp-pasv +Category: ftp --- Tell curl to not use the IP address the server suggests in its response to curl's PASV command when curl connects the data connection. Instead curl diff --git a/docs/cmdline-opts/ftp-ssl-ccc-mode.d b/docs/cmdline-opts/ftp-ssl-ccc-mode.d index be1029498..6289e544a 100644 --- a/docs/cmdline-opts/ftp-ssl-ccc-mode.d +++ b/docs/cmdline-opts/ftp-ssl-ccc-mode.d @@ -4,6 +4,7 @@ Help: Set CCC mode Protocols: FTP Added: 7.16.2 See-also: ftp-ssl-ccc +Category: ftp tls --- Sets the CCC mode. The passive mode will not initiate the shutdown, but instead wait for the server to do it, and will not reply to the shutdown from diff --git a/docs/cmdline-opts/ftp-ssl-ccc.d b/docs/cmdline-opts/ftp-ssl-ccc.d index c6edc5b39..33cab4302 100644 --- a/docs/cmdline-opts/ftp-ssl-ccc.d +++ b/docs/cmdline-opts/ftp-ssl-ccc.d @@ -3,6 +3,7 @@ Help: Send CCC after authenticating Protocols: FTP See-also: ssl ftp-ssl-ccc-mode Added: 7.16.1 +Category: ftp tls --- Use CCC (Clear Command Channel) Shuts down the SSL/TLS layer after authenticating. The rest of the control channel communication will be diff --git a/docs/cmdline-opts/ftp-ssl-control.d b/docs/cmdline-opts/ftp-ssl-control.d index 87a822531..5191353dd 100644 --- a/docs/cmdline-opts/ftp-ssl-control.d +++ b/docs/cmdline-opts/ftp-ssl-control.d @@ -2,6 +2,7 @@ Long: ftp-ssl-control Help: Require SSL/TLS for FTP login, clear for transfer Protocols: FTP Added: 7.16.0 +Category: ftp tls --- Require SSL/TLS for the FTP login, clear for transfer. Allows secure authentication, but non-encrypted data transfers for efficiency. Fails the diff --git a/docs/cmdline-opts/gen.pl b/docs/cmdline-opts/gen.pl index 0c434dac9..3fec1646d 100755 --- a/docs/cmdline-opts/gen.pl +++ b/docs/cmdline-opts/gen.pl @@ -43,6 +43,7 @@ my %helplong; my %arglong; my %redirlong; my %protolong; +my %catlong; # get the long name version, return the man page string sub manpageify { @@ -126,6 +127,7 @@ sub single { my $arg; my $mutexed; my $requires; + my $category; my $seealso; my $magic; # cmdline special option while(<F>) { @@ -159,6 +161,9 @@ sub single { elsif(/^Requires: *(.*)/i) { $requires=$1; } + elsif(/^Category: *(.*)/i) { + $category=$1; + } elsif(/^Help: *(.*)/i) { ; } @@ -166,6 +171,9 @@ sub single { if(!$long) { print STDERR "WARN: no 'Long:' in $f\n"; } + if(!$category) { + print STDERR "WARN: no 'Category:' in $f\n"; + } last; } else { @@ -274,6 +282,7 @@ sub getshortlong { my $help; my $arg; my $protocols; + my $category; while(<F>) { if(/^Short: (.)/i) { $short=$1; @@ -290,6 +299,9 @@ sub getshortlong { elsif(/^Protocols: (.*)/i) { $protocols=$1; } + elsif(/^Category: (.*)/i) { + $category=$1; + } elsif(/^---/) { last; } @@ -303,6 +315,7 @@ sub getshortlong { $helplong{$long}=$help; $arglong{$long}=$arg; $protolong{$long}=$protocols; + $catlong{$long}=$category; } } @@ -328,6 +341,8 @@ sub listhelp { foreach my $f (sort keys %helplong) { my $long = $f; my $short = $optlong{$long}; + my @categories = split ' ', $catlong{$long}; + my $bitmask; my $opt; if(defined($short) && $long) { @@ -336,7 +351,13 @@ sub listhelp { elsif($long && !$short) { $opt = " --$long"; } - + for my $i (0 .. $#categories) { + $bitmask .= 'CURLHELP_' . uc $categories[$i]; + # If not last element, append | + if($i < $#categories) { + $bitmask .= ' | '; + } + } my $arg = $arglong{$long}; if($arg) { $opt .= " $arg"; @@ -344,7 +365,7 @@ sub listhelp { my $desc = $helplong{$f}; $desc =~ s/\"/\\\"/g; # escape double quotes - my $line = sprintf " {\"%s\",\n \"%s\"},\n", $opt, $desc; + my $line = sprintf " {\"%s\",\n \"%s\",\n %s},\n", $opt, $desc, $bitmask; if(length($opt) + length($desc) > 78) { print STDERR "WARN: the --$long line is too long\n"; @@ -353,6 +374,25 @@ sub listhelp { } } +sub listcats { + my %allcats; + foreach my $f (sort keys %helplong) { + my @categories = split ' ', $catlong{$f}; + foreach (@categories) { + $allcats{$_} = undef; + } + } + my @categories; + foreach my $key (keys %allcats) { + push @categories, $key; + } + @categories = sort @categories; + unshift @categories, 'hidden'; + for my $i (0..$#categories) { + print '#define ' . 'CURLHELP_' . uc($categories[$i]) . ' ' . "1u << " . $i . "u\n"; + } +} + sub mainpage { my (@files) = @_; # show the page header @@ -406,8 +446,12 @@ sub getargs { showprotocols(); return; } + elsif($f eq "listcats") { + listcats(); + return; + } - print "Usage: gen.pl <mainpage/listhelp/single FILE/protos> [files]\n"; + print "Usage: gen.pl <mainpage/listhelp/single FILE/protos/listcats> [files]\n"; } #------------------------------------------------------------------------ diff --git a/docs/cmdline-opts/get.d b/docs/cmdline-opts/get.d index be7cb25f0..d529bb4e0 100644 --- a/docs/cmdline-opts/get.d +++ b/docs/cmdline-opts/get.d @@ -1,6 +1,7 @@ Long: get Short: G Help: Put the post data in the URL and use GET +Category: http upload --- When used, this option will make all data specified with --data, --data-binary or --data-urlencode to be used in an HTTP GET request instead of the POST diff --git a/docs/cmdline-opts/globoff.d b/docs/cmdline-opts/globoff.d index fff6516b6..4b5f30de9 100644 --- a/docs/cmdline-opts/globoff.d +++ b/docs/cmdline-opts/globoff.d @@ -1,6 +1,7 @@ Long: globoff Short: g Help: Disable URL sequences and ranges using {} and [] +Category: curl --- This option switches off the "URL globbing parser". When you set this option, you can specify URLs that contain the letters {}[] without having them being diff --git a/docs/cmdline-opts/happy-eyeballs-timeout-ms.d b/docs/cmdline-opts/happy-eyeballs-timeout-ms.d index 611a8f1d8..ceff2a7df 100644 --- a/docs/cmdline-opts/happy-eyeballs-timeout-ms.d +++ b/docs/cmdline-opts/happy-eyeballs-timeout-ms.d @@ -2,6 +2,7 @@ Long: happy-eyeballs-timeout-ms Arg: <milliseconds> Help: Time for IPv6 before trying IPv4 Added: 7.59.0 +Category: connection --- Happy eyeballs is an algorithm that attempts to connect to both IPv4 and IPv6 addresses for dual-stack hosts, preferring IPv6 first for the number of diff --git a/docs/cmdline-opts/haproxy-protocol.d b/docs/cmdline-opts/haproxy-protocol.d index cc41c9c44..835820465 100644 --- a/docs/cmdline-opts/haproxy-protocol.d +++ b/docs/cmdline-opts/haproxy-protocol.d @@ -2,6 +2,7 @@ Long: haproxy-protocol Help: Send HAProxy PROXY protocol v1 header Protocols: HTTP Added: 7.60.0 +Category: http proxy --- Send a HAProxy PROXY protocol v1 header at the beginning of the connection. This is used by some load balancers and reverse proxies to indicate the client's diff --git a/docs/cmdline-opts/head.d b/docs/cmdline-opts/head.d index 350a100f6..6fe468511 100644 --- a/docs/cmdline-opts/head.d +++ b/docs/cmdline-opts/head.d @@ -2,6 +2,7 @@ Long: head Short: I Help: Show document info only Protocols: HTTP FTP FILE +Category: http ftp file --- Fetch the headers only! HTTP-servers feature the command HEAD which this uses to get nothing but the header of a document. When used on an FTP or FILE file, diff --git a/docs/cmdline-opts/header.d b/docs/cmdline-opts/header.d index d8292ed77..e84168996 100644 --- a/docs/cmdline-opts/header.d +++ b/docs/cmdline-opts/header.d @@ -3,6 +3,7 @@ Short: H Arg: <header/@file> Help: Pass custom header(s) to server Protocols: HTTP +Category: http --- Extra header to include in the request when sending HTTP to a server. You may specify any number of extra headers. Note that if you should add a custom diff --git a/docs/cmdline-opts/help.d b/docs/cmdline-opts/help.d index 64aa696d4..bf80b7818 100644 --- a/docs/cmdline-opts/help.d +++ b/docs/cmdline-opts/help.d @@ -1,6 +1,12 @@ Long: help +Arg: <category> Short: h -Help: This help text +Help: Get help for commands +Category: important curl --- -Usage help. This lists all current command line options with a short -description. +Usage help. This lists all commands of the <category>. +If no arg was provided, curl will display the most important +command line arguments and the list of categories. +If the argument "all" was provided, curl will display all options available. +If the argument "category" was provided, curl will display all categories and +their meanings. diff --git a/docs/cmdline-opts/hostpubmd5.d b/docs/cmdline-opts/hostpubmd5.d index a85115803..c926ed8b5 100644 --- a/docs/cmdline-opts/hostpubmd5.d +++ b/docs/cmdline-opts/hostpubmd5.d @@ -3,6 +3,7 @@ Arg: <md5> Help: Acceptable MD5 hash of the host public key Protocols: SFTP SCP Added: 7.17.1 +Category: sftp scp --- Pass a string containing 32 hexadecimal digits. The string should be the 128 bit MD5 checksum of the remote host's public key, curl will refuse diff --git a/docs/cmdline-opts/http0.9.d b/docs/cmdline-opts/http0.9.d index 7e783f696..954c22a17 100644 --- a/docs/cmdline-opts/http0.9.d +++ b/docs/cmdline-opts/http0.9.d @@ -3,6 +3,7 @@ Tags: Versions Protocols: HTTP Added: Help: Allow HTTP 0.9 responses +Category: http --- Tells curl to be fine with HTTP version 0.9 response. diff --git a/docs/cmdline-opts/http1.0.d b/docs/cmdline-opts/http1.0.d index d9bbd76f0..a4059dbf0 100644 --- a/docs/cmdline-opts/http1.0.d +++ b/docs/cmdline-opts/http1.0.d @@ -5,6 +5,7 @@ Protocols: HTTP Added: Mutexed: http1.1 http2 Help: Use HTTP 1.0 +Category: http --- Tells curl to use HTTP version 1.0 instead of using its internally preferred HTTP version. diff --git a/docs/cmdline-opts/http1.1.d b/docs/cmdline-opts/http1.1.d index f1e6b5c3b..a71a40bab 100644 --- a/docs/cmdline-opts/http1.1.d +++ b/docs/cmdline-opts/http1.1.d @@ -4,5 +4,6 @@ Protocols: HTTP Added: 7.33.0 Mutexed: http1.0 http2 Help: Use HTTP 1.1 +Category: http --- Tells curl to use HTTP version 1.1. diff --git a/docs/cmdline-opts/http2-prior-knowledge.d b/docs/cmdline-opts/http2-prior-knowledge.d index f793f775d..ea2906edb 100644 --- a/docs/cmdline-opts/http2-prior-knowledge.d +++ b/docs/cmdline-opts/http2-prior-knowledge.d @@ -5,6 +5,7 @@ Added: 7.49.0 Mutexed: http1.1 http1.0 http2 Requires: HTTP/2 Help: Use HTTP 2 without HTTP/1.1 Upgrade +Category: http --- Tells curl to issue its non-TLS HTTP requests using HTTP/2 without HTTP/1.1 Upgrade. It requires prior knowledge that the server supports HTTP/2 straight diff --git a/docs/cmdline-opts/http2.d b/docs/cmdline-opts/http2.d index cf8f2988e..197515ee8 100644 --- a/docs/cmdline-opts/http2.d +++ b/docs/cmdline-opts/http2.d @@ -7,5 +7,6 @@ Requires: HTTP/2 See-also: no-alpn Help: Use HTTP 2 See-also: http1.1 http3 +Category: http --- Tells curl to use HTTP version 2. diff --git a/docs/cmdline-opts/http3.d b/docs/cmdline-opts/http3.d index 8265937a3..478b662aa 100644 --- a/docs/cmdline-opts/http3.d +++ b/docs/cmdline-opts/http3.d @@ -6,6 +6,7 @@ Mutexed: http1.1 http1.0 http2 http2-prior-knowledge Requires: HTTP/3 Help: Use HTTP v3 See-also: http1.1 http2 +Category: http --- WARNING: this option is experimental. Do not use in production. diff --git a/docs/cmdline-opts/ignore-content-length.d b/docs/cmdline-opts/ignore-content-length.d index 53524f518..82ac5da09 100644 --- a/docs/cmdline-opts/ignore-content-length.d +++ b/docs/cmdline-opts/ignore-content-length.d @@ -1,6 +1,7 @@ Long: ignore-content-length Help: Ignore the size of the remote resource Protocols: FTP HTTP +Category: http ftp --- For HTTP, Ignore the Content-Length header. This is particularly useful for servers running Apache 1.x, which will report incorrect Content-Length for diff --git a/docs/cmdline-opts/include.d b/docs/cmdline-opts/include.d index 9d282dd16..250d4accf 100644 --- a/docs/cmdline-opts/include.d +++ b/docs/cmdline-opts/include.d @@ -2,6 +2,7 @@ Long: include Short: i Help: Include protocol response headers in the output See-also: verbose +Category: important verbose --- Include the HTTP response headers in the output. The HTTP response headers can include things like server name, cookies, date of the document, HTTP version diff --git a/docs/cmdline-opts/insecure.d b/docs/cmdline-opts/insecure.d index 49b0a4322..35f4a2e0f 100644 --- a/docs/cmdline-opts/insecure.d +++ b/docs/cmdline-opts/insecure.d @@ -3,6 +3,7 @@ Short: k Help: Allow insecure server connections when using SSL Protocols: TLS See-also: proxy-insecure cacert +Category: tls --- By default, every SSL connection curl makes is verified to be secure. This diff --git a/docs/cmdline-opts/interface.d b/docs/cmdline-opts/interface.d index 65827fb8b..196e7efa3 100644 --- a/docs/cmdline-opts/interface.d +++ b/docs/cmdline-opts/interface.d @@ -2,6 +2,7 @@ Long: interface Arg: <name> Help: Use network INTERFACE (or address) See-also: dns-interface +Category: connection --- Perform an operation using a specified interface. You can enter interface diff --git a/docs/cmdline-opts/ipv4.d b/docs/cmdline-opts/ipv4.d index 9c40c8c3e..a6691376a 100644 --- a/docs/cmdline-opts/ipv4.d +++ b/docs/cmdline-opts/ipv4.d @@ -7,6 +7,7 @@ Mutexed: ipv6 Requires: See-also: http1.1 http2 Help: Resolve names to IPv4 addresses +Category: connection dns --- This option tells curl to resolve names to IPv4 addresses only, and not for example try IPv6. diff --git a/docs/cmdline-opts/ipv6.d b/docs/cmdline-opts/ipv6.d index 6eef6dd03..ce0415caa 100644 --- a/docs/cmdline-opts/ipv6.d +++ b/docs/cmdline-opts/ipv6.d @@ -7,6 +7,7 @@ Mutexed: ipv4 Requires: See-also: http1.1 http2 Help: Resolve names to IPv6 addresses +Category: connection dns --- This option tells curl to resolve names to IPv6 addresses only, and not for example try IPv4. diff --git a/docs/cmdline-opts/junk-session-cookies.d b/docs/cmdline-opts/junk-session-cookies.d index 40ccd9c2d..993b77fa8 100644 --- a/docs/cmdline-opts/junk-session-cookies.d +++ b/docs/cmdline-opts/junk-session-cookies.d @@ -3,6 +3,7 @@ Short: j Help: Ignore session cookies read from file Protocols: HTTP See-also: cookie cookie-jar +Category: http --- When curl is told to read cookies from a given file, this option will make it discard all "session cookies". This will basically have the same effect as if diff --git a/docs/cmdline-opts/keepalive-time.d b/docs/cmdline-opts/keepalive-time.d index c816e13ff..41261535c 100644 --- a/docs/cmdline-opts/keepalive-time.d +++ b/docs/cmdline-opts/keepalive-time.d @@ -2,6 +2,7 @@ Long: keepalive-time Arg: <seconds> Help: Interval time for keepalive probes Added: 7.18.0 +Category: connection --- This option sets the time a connection needs to remain idle before sending keepalive probes and the time between individual keepalive probes. It is diff --git a/docs/cmdline-opts/key-type.d b/docs/cmdline-opts/key-type.d index bf39bcd35..50a068676 100644 --- a/docs/cmdline-opts/key-type.d +++ b/docs/cmdline-opts/key-type.d @@ -2,6 +2,7 @@ Long: key-type Arg: <type> Help: Private key file type (DER/PEM/ENG) Protocols: TLS +Category: tls --- Private key file type. Specify which type your --key provided private key is. DER, PEM, and ENG are supported. If not specified, PEM is assumed. diff --git a/docs/cmdline-opts/key.d b/docs/cmdline-opts/key.d index 855e2f7b6..a762e6faf 100644 --- a/docs/cmdline-opts/key.d +++ b/docs/cmdline-opts/key.d @@ -2,6 +2,7 @@ Long: key Arg: <key> Protocols: TLS SSH Help: Private key file name +Category: tls ssh --- Private key file name. Allows you to provide your private key in this separate file. For SSH, if not specified, curl tries the following candidates in order: diff --git a/docs/cmdline-opts/krb.d b/docs/cmdline-opts/krb.d index 19547af08..7759cfb04 100644 --- a/docs/cmdline-opts/krb.d +++ b/docs/cmdline-opts/krb.d @@ -3,6 +3,7 @@ Arg: <level> Help: Enable Kerberos with security <level> Protocols: FTP Requires: Kerberos +Category: ftp --- Enable Kerberos authentication and use. The level must be entered and should be one of 'clear', 'safe', 'confidential', or 'private'. Should you use a diff --git a/docs/cmdline-opts/libcurl.d b/docs/cmdline-opts/libcurl.d index ef132fe74..eb9850c68 100644 --- a/docs/cmdline-opts/libcurl.d +++ b/docs/cmdline-opts/libcurl.d @@ -2,6 +2,7 @@ Long: libcurl Arg: <file> Help: Dump libcurl equivalent code of this command line Added: 7.16.1 +Category: curl --- Append this option to any ordinary curl command line, and you will get a libcurl-using C source code written to the file that does the equivalent diff --git a/docs/cmdline-opts/limit-rate.d b/docs/cmdline-opts/limit-rate.d index 06c456e3e..cb3a86077 100644 --- a/docs/cmdline-opts/limit-rate.d +++ b/docs/cmdline-opts/limit-rate.d @@ -1,6 +1,7 @@ Long: limit-rate Arg: <speed> Help: Limit transfer speed to RATE +Category: connection --- Specify the maximum transfer rate you want curl to use - for both downloads and uploads. This feature is useful if you have a limited pipe and you'd like diff --git a/docs/cmdline-opts/list-only.d b/docs/cmdline-opts/list-only.d index 63b2851f4..c69885801 100644 --- a/docs/cmdline-opts/list-only.d +++ b/docs/cmdline-opts/list-only.d @@ -3,6 +3,7 @@ Short: l Protocols: FTP POP3 Help: List only mode Added: 4.0 +Category: ftp pop3 --- (FTP) When listing an FTP directory, this switch forces a name-only view. This is diff --git a/docs/cmdline-opts/local-port.d b/docs/cmdline-opts/local-port.d index d96b46eb8..3f7a0e024 100644 --- a/docs/cmdline-opts/local-port.d +++ b/docs/cmdline-opts/local-port.d @@ -2,6 +2,7 @@ Long: local-port Arg: <num/range> Help: Force use of RANGE for local port numbers Added: 7.15.2 +Category: connection --- Set a preferred single number or range (FROM-TO) of local port numbers to use for the connection(s). Note that port numbers by nature are a scarce resource diff --git a/docs/cmdline-opts/location-trusted.d b/docs/cmdline-opts/location-trusted.d index 995a8718a..f01d842bc 100644 --- a/docs/cmdline-opts/location-trusted.d +++ b/docs/cmdline-opts/location-trusted.d @@ -2,6 +2,7 @@ Long: location-trusted Help: Like --location, and send auth to other hosts Protocols: HTTP See-also: user +Category: http auth --- Like --location, but will allow sending the name + password to all hosts that the site may redirect to. This may or may not introduce a security breach if diff --git a/docs/cmdline-opts/location.d b/docs/cmdline-opts/location.d index b5ba1f4fa..c70b2eba8 100644 --- a/docs/cmdline-opts/location.d +++ b/docs/cmdline-opts/location.d @@ -2,6 +2,7 @@ Long: location Short: L Help: Follow redirects Protocols: HTTP +Category: http --- If the server reports that the requested page has moved to a different location (indicated with a Location: header and a 3XX response code), this diff --git a/docs/cmdline-opts/login-options.d b/docs/cmdline-opts/login-options.d index 8bad0511d..887d5d517 100644 --- a/docs/cmdline-opts/login-options.d +++ b/docs/cmdline-opts/login-options.d @@ -3,6 +3,7 @@ Arg: <options> Protocols: IMAP POP3 SMTP Help: Server login options Added: 7.34.0 +Category: imap pop3 smtp auth --- Specify the login options to use during server authentication. diff --git a/docs/cmdline-opts/mail-auth.d b/docs/cmdline-opts/mail-auth.d index 70cf0eda4..529997161 100644 --- a/docs/cmdline-opts/mail-auth.d +++ b/docs/cmdline-opts/mail-auth.d @@ -4,6 +4,7 @@ Protocols: SMTP Help: Originator address of the original email Added: 7.25.0 See-also: mail-rcpt mail-from +Category: smtp --- Specify a single address. This will be used to specify the authentication address (identity) of a submitted message that is being relayed to another diff --git a/docs/cmdline-opts/mail-from.d b/docs/cmdline-opts/mail-from.d index 1d932344c..faf48e2a4 100644 --- a/docs/cmdline-opts/mail-from.d +++ b/docs/cmdline-opts/mail-from.d @@ -4,5 +4,6 @@ Help: Mail from this address Protocols: SMTP Added: 7.20.0 See-also: mail-rcpt mail-auth +Category: smtp --- Specify a single address that the given mail should get sent from. diff --git a/docs/cmdline-opts/mail-rcpt-allowfails.d b/docs/cmdline-opts/mail-rcpt-allowfails.d index b5723df34..76457c32e 100644 --- a/docs/cmdline-opts/mail-rcpt-allowfails.d +++ b/docs/cmdline-opts/mail-rcpt-allowfails.d @@ -2,6 +2,7 @@ Long: mail-rcpt-allowfails Help: Allow RCPT TO command to fail for some recipients Protocols: SMTP Added: 7.69.0 +Category: smtp --- When sending data to multiple recipients, by default curl will abort SMTP conversation if at least one of the recipients causes RCPT TO command to diff --git a/docs/cmdline-opts/mail-rcpt.d b/docs/cmdline-opts/mail-rcpt.d index 0a2859b68..d8ae046ee 100644 --- a/docs/cmdline-opts/mail-rcpt.d +++ b/docs/cmdline-opts/mail-rcpt.d @@ -3,6 +3,7 @@ Arg: <address> Help: Mail to this address Protocols: SMTP Added: 7.20.0 +Category: smtp --- Specify a single address, user name or mailing list name. Repeat this option several times to send to multiple recipients. diff --git a/docs/cmdline-opts/manual.d b/docs/cmdline-opts/manual.d index a9dbb0c78..25ed08dd2 100644 --- a/docs/cmdline-opts/manual.d +++ b/docs/cmdline-opts/manual.d @@ -1,5 +1,6 @@ Long: manual Short: M Help: Display the full manual +Category: curl --- Manual. Display the huge help text. diff --git a/docs/cmdline-opts/max-filesize.d b/docs/cmdline-opts/max-filesize.d index 50d5266e1..1f6bdc663 100644 --- a/docs/cmdline-opts/max-filesize.d +++ b/docs/cmdline-opts/max-filesize.d @@ -2,6 +2,7 @@ Long: max-filesize Arg: <bytes> Help: Maximum file size to download See-also: limit-rate +Category: connection --- Specify the maximum size (in bytes) of a file to download. If the file requested is larger than this value, the transfer will not start and curl will diff --git a/docs/cmdline-opts/max-redirs.d b/docs/cmdline-opts/max-redirs.d index a97860a8b..ba16c43fc 100644 --- a/docs/cmdline-opts/max-redirs.d +++ b/docs/cmdline-opts/max-redirs.d @@ -2,6 +2,7 @@ Long: max-redirs Arg: <num> Help: Maximum number of redirects allowed Protocols: HTTP +Category: http --- Set maximum number of redirection-followings allowed. When --location is used, is used to prevent curl from following redirections too much. By default, the diff --git a/docs/cmdline-opts/max-time.d b/docs/cmdline-opts/max-time.d index 0057f9d04..c4e4ed7eb 100644 --- a/docs/cmdline-opts/max-time.d +++ b/docs/cmdline-opts/max-time.d @@ -3,6 +3,7 @@ Short: m Arg: <seconds> Help: Maximum time allowed for the transfer See-also: connect-timeout +Category: connection --- Maximum time in seconds that you allow the whole operation to take. This is useful for preventing your batch jobs from hanging for hours due to slow diff --git a/docs/cmdline-opts/metalink.d b/docs/cmdline-opts/metalink.d index 81fc8bc78..883766439 100644 --- a/docs/cmdline-opts/metalink.d +++ b/docs/cmdline-opts/metalink.d @@ -2,6 +2,7 @@ Long: metalink Help: Process given URLs as metalink XML file Added: 7.27.0 Requires: metalink +Category: misc --- This option can tell curl to parse and process a given URI as Metalink file (both version 3 and 4 (RFC 5854) are supported) and make use of the mirrors diff --git a/docs/cmdline-opts/negotiate.d b/docs/cmdline-opts/negotiate.d index 69a6b9170..e247bfbee 100644 --- a/docs/cmdline-opts/negotiate.d +++ b/docs/cmdline-opts/negotiate.d @@ -2,6 +2,7 @@ Long: negotiate Help: Use HTTP Negotiate (SPNEGO) authentication Protocols: HTTP See-also: basic ntlm anyauth proxy-negotiate +Category: auth http --- Enables Negotiate (SPNEGO) authentication. diff --git a/docs/cmdline-opts/netrc-file.d b/docs/cmdline-opts/netrc-file.d index 50126d255..95fb2654a 100644 --- a/docs/cmdline-opts/netrc-file.d +++ b/docs/cmdline-opts/netrc-file.d @@ -3,6 +3,7 @@ Help: Specify FILE for netrc Arg: <filename> Added: 7.21.5 Mutexed: netrc +Category: curl --- This option is similar to --netrc, except that you provide the path (absolute or relative) to the netrc file that curl should use. You can only specify one diff --git a/docs/cmdline-opts/netrc-optional.d b/docs/cmdline-opts/netrc-optional.d index c28540309..fa92032bd 100644 --- a/docs/cmdline-opts/netrc-optional.d +++ b/docs/cmdline-opts/netrc-optional.d @@ -2,6 +2,7 @@ Long: netrc-optional Help: Use either .netrc or URL Mutexed: netrc See-also: netrc-file +Category: curl --- Very similar to --netrc, but this option makes the .netrc usage \fBoptional\fP and not mandatory as the --netrc option does. diff --git a/docs/cmdline-opts/netrc.d b/docs/cmdline-opts/netrc.d index 2df26782c..6aac568a6 100644 --- a/docs/cmdline-opts/netrc.d +++ b/docs/cmdline-opts/netrc.d @@ -1,6 +1,7 @@ Long: netrc Short: n Help: Must read .netrc for user name and password +Category: curl --- Makes curl scan the \fI.netrc\fP (\fI_netrc\fP on Windows) file in the user's home directory for login name and password. This is typically used for FTP on diff --git a/docs/cmdline-opts/next.d b/docs/cmdline-opts/next.d index 1d1e70a35..1adcc7535 100644 --- a/docs/cmdline-opts/next.d +++ b/docs/cmdline-opts/next.d @@ -5,6 +5,7 @@ Protocols: Added: 7.36.0 Magic: divider Help: Make next URL use its separate set of options +Category: curl --- Tells curl to use a separate operation for the following URL and associated options. This allows you to send several URL requests, each with their own diff --git a/docs/cmdline-opts/no-alpn.d b/docs/cmdline-opts/no-alpn.d index 88abb8368..8031b4f07 100644 --- a/docs/cmdline-opts/no-alpn.d +++ b/docs/cmdline-opts/no-alpn.d @@ -5,6 +5,7 @@ Added: 7.36.0 See-also: no-npn http2 Requires: TLS Help: Disable the ALPN TLS extension +Category: tls http --- Disable the ALPN TLS extension. ALPN is enabled by default if libcurl was built with an SSL library that supports ALPN. ALPN is used by a libcurl that supports diff --git a/docs/cmdline-opts/no-buffer.d b/docs/cmdline-opts/no-buffer.d index 65a6282f6..1079f4712 100644 --- a/docs/cmdline-opts/no-buffer.d +++ b/docs/cmdline-opts/no-buffer.d @@ -1,6 +1,7 @@ Long: no-buffer Short: N Help: Disable buffering of the output stream +Category: curl --- Disables the buffering of the output stream. In normal work situations, curl will use a standard buffered output stream that will have the effect that it diff --git a/docs/cmdline-opts/no-keepalive.d b/docs/cmdline-opts/no-keepalive.d index 8fb28a036..72f3bc9a5 100644 --- a/docs/cmdline-opts/no-keepalive.d +++ b/docs/cmdline-opts/no-keepalive.d @@ -1,5 +1,6 @@ Long: no-keepalive Help: Disable TCP keepalive on the connection +Category: connection --- Disables the use of keepalive messages on the TCP connection. curl otherwise enables them by default. diff --git a/docs/cmdline-opts/no-npn.d b/docs/cmdline-opts/no-npn.d index ab0f6de2e..27e5974bd 100644 --- a/docs/cmdline-opts/no-npn.d +++ b/docs/cmdline-opts/no-npn.d @@ -6,6 +6,7 @@ Mutexed: See-also: no-alpn http2 Requires: TLS Help: Disable the NPN TLS extension +Category: tls http --- Disable the NPN TLS extension. NPN is enabled by default if libcurl was built with an SSL library that supports NPN. NPN is used by a libcurl that supports diff --git a/docs/cmdline-opts/no-progress-meter.d b/docs/cmdline-opts/no-progress-meter.d index aff0717d3..bf28d635d 100644 --- a/docs/cmdline-opts/no-progress-meter.d +++ b/docs/cmdline-opts/no-progress-meter.d @@ -2,6 +2,7 @@ Long: no-progress-meter Help: Do not show the progress meter See-also: verbose silent Added: 7.67.0 +Category: verbose --- Option to switch off the progress meter output without muting or otherwise affecting warning and informational messages like --silent does. diff --git a/docs/cmdline-opts/no-sessionid.d b/docs/cmdline-opts/no-sessionid.d index 397a15869..013ca4cb4 100644 --- a/docs/cmdline-opts/no-sessionid.d +++ b/docs/cmdline-opts/no-sessionid.d @@ -2,6 +2,7 @@ Long: no-sessionid Help: Disable SSL session-ID reusing Protocols: TLS Added: 7.16.0 +Category: tls --- Disable curl's use of SSL session-ID caching. By default all transfers are done using the cache. Note that while nothing should ever get hurt by diff --git a/docs/cmdline-opts/noproxy.d b/docs/cmdline-opts/noproxy.d index a216e75f4..12ce6d3ed 100644 --- a/docs/cmdline-opts/noproxy.d +++ b/docs/cmdline-opts/noproxy.d @@ -2,6 +2,7 @@ Long: noproxy Arg: <no-proxy-list> Help: List of hosts which do not use proxy Added: 7.19.4 +Category: proxy --- Comma-separated list of hosts which do not use a proxy, if one is specified. The only wildcard is a single * character, which matches all hosts, and diff --git a/docs/cmdline-opts/ntlm-wb.d b/docs/cmdline-opts/ntlm-wb.d index 7b9338408..4a2f7e1e6 100644 --- a/docs/cmdline-opts/ntlm-wb.d +++ b/docs/cmdline-opts/ntlm-wb.d @@ -2,6 +2,7 @@ Long: ntlm-wb Help: Use HTTP NTLM authentication with winbind Protocols: HTTP See-also: ntlm proxy-ntlm +Category: auth http --- Enables NTLM much in the style --ntlm does, but hand over the authentication to the separate binary ntlmauth application that is executed when needed. diff --git a/docs/cmdline-opts/ntlm.d b/docs/cmdline-opts/ntlm.d index baaa1d534..c63c086eb 100644 --- a/docs/cmdline-opts/ntlm.d +++ b/docs/cmdline-opts/ntlm.d @@ -4,6 +4,7 @@ Mutexed: basic negotiate digest anyauth See-also: proxy-ntlm Protocols: HTTP Requires: TLS +Category: auth http --- Enables NTLM authentication. The NTLM authentication method was designed by Microsoft and is used by IIS web servers. It is a proprietary protocol, diff --git a/docs/cmdline-opts/oauth2-bearer.d b/docs/cmdline-opts/oauth2-bearer.d index 30466e579..e0ea210ed 100644 --- a/docs/cmdline-opts/oauth2-bearer.d +++ b/docs/cmdline-opts/oauth2-bearer.d @@ -2,6 +2,7 @@ Long: oauth2-bearer Help: OAuth 2 Bearer Token Arg: <token> Protocols: IMAP POP3 SMTP HTTP +Category: auth --- Specify the Bearer Token for OAUTH 2.0 server authentication. The Bearer Token is used in conjunction with the user name which can be specified as part of diff --git a/docs/cmdline-opts/output-dir.d b/docs/cmdline-opts/output-dir.d index 7fbe9bfc3..d2ff7738e 100644 --- a/docs/cmdline-opts/output-dir.d +++ b/docs/cmdline-opts/output-dir.d @@ -3,6 +3,7 @@ Arg: <dir> Help: Directory to save files in Added: 7.73.0 See-also: remote-name remote-header-name +Category: curl --- This option specifies the directory in which files should be stored, when diff --git a/docs/cmdline-opts/output.d b/docs/cmdline-opts/output.d index f310c267d..bf35bf4a0 100644 --- a/docs/cmdline-opts/output.d +++ b/docs/cmdline-opts/output.d @@ -3,6 +3,7 @@ Arg: <file> Short: o Help: Write to file instead of stdout See-also: remote-name remote-name-all remote-header-name +Category: important curl --- Write output to <file> instead of stdout. If you are using {} or [] to fetch multiple documents, you should quote the URL and you can use '#' followed by a diff --git a/docs/cmdline-opts/parallel-immediate.d b/docs/cmdline-opts/parallel-immediate.d index 343931085..95c8afc42 100644 --- a/docs/cmdline-opts/parallel-immediate.d +++ b/docs/cmdline-opts/parallel-immediate.d @@ -2,6 +2,7 @@ Long: parallel-immediate Help: Do not wait for multiplexing (with --parallel) Added: 7.68.0 See-also: parallel parallel-max +Category: connection curl --- When doing parallel transfers, this option will instruct curl that it should rather prefer opening up more connections in parallel at once rather than diff --git a/docs/cmdline-opts/parallel-max.d b/docs/cmdline-opts/parallel-max.d index a8c79c743..d49aeb7a9 100644 --- a/docs/cmdline-opts/parallel-max.d +++ b/docs/cmdline-opts/parallel-max.d @@ -2,6 +2,7 @@ Long: parallel-max Help: Maximum concurrency for parallel transfers Added: 7.66.0 See-also: parallel +Category: connection curl --- When asked to do parallel transfers, using --parallel, this option controls the maximum amount of transfers to do simultaneously. diff --git a/docs/cmdline-opts/parallel.d b/docs/cmdline-opts/parallel.d index fac84e624..d6b4affe3 100644 --- a/docs/cmdline-opts/parallel.d +++ b/docs/cmdline-opts/parallel.d @@ -2,6 +2,7 @@ Short: Z Long: parallel Help: Perform transfers in parallel Added: 7.66.0 +Category: connection curl --- Makes curl perform its transfers in parallel as compared to the regular serial manner. diff --git a/docs/cmdline-opts/pass.d b/docs/cmdline-opts/pass.d index 2639cb9d0..f6633d242 100644 --- a/docs/cmdline-opts/pass.d +++ b/docs/cmdline-opts/pass.d @@ -2,6 +2,7 @@ Long: pass Arg: <phrase> Help: Pass phrase for the private key Protocols: SSH TLS +Category: ssh tls auth --- Passphrase for the private key diff --git a/docs/cmdline-opts/path-as-is.d b/docs/cmdline-opts/path-as-is.d index 946e2f07a..0bfaf6639 100644 --- a/docs/cmdline-opts/path-as-is.d +++ b/docs/cmdline-opts/path-as-is.d @@ -1,6 +1,7 @@ Long: path-as-is Help: Do not squash .. sequences in URL path Added: 7.42.0 +Category: curl --- Tell curl to not handle sequences of /../ or /./ in the given URL path. Normally curl will squash or merge them according to standards but with diff --git a/docs/cmdline-opts/pinnedpubkey.d b/docs/cmdline-opts/pinnedpubkey.d index cd21911f8..617252c6c 100644 --- a/docs/cmdline-opts/pinnedpubkey.d +++ b/docs/cmdline-opts/pinnedpubkey.d @@ -2,6 +2,7 @@ Long: pinnedpubkey Arg: <hashes> Help: FILE/HASHES Public key to verify peer against Protocols: TLS +Category: tls --- Tells curl to use the specified public key file (or hashes) to verify the peer. This can be a path to a file which contains a single public key in PEM diff --git a/docs/cmdline-opts/post301.d b/docs/cmdline-opts/post301.d index 87a9fe7ed..9cc2ad018 100644 --- a/docs/cmdline-opts/post301.d +++ b/docs/cmdline-opts/post301.d @@ -3,6 +3,7 @@ Help: Do not switch to GET after following a 301 Protocols: HTTP See-also: post302 post303 location Added: 7.17.1 +Category: http post --- Tells curl to respect RFC 7231/6.4.2 and not convert POST requests into GET requests when following a 301 redirection. The non-RFC behaviour is ubiquitous diff --git a/docs/cmdline-opts/post302.d b/docs/cmdline-opts/post302.d index caf0d87f1..02749032f 100644 --- a/docs/cmdline-opts/post302.d +++ b/docs/cmdline-opts/post302.d @@ -3,6 +3,7 @@ Help: Do not switch to GET after following a 302 Protocols: HTTP See-also: post301 post303 location Added: 7.19.1 +Category: http post --- Tells curl to respect RFC 7231/6.4.3 and not convert POST requests into GET requests when following a 302 redirection. The non-RFC behaviour is ubiquitous diff --git a/docs/cmdline-opts/post303.d b/docs/cmdline-opts/post303.d index 44f39e610..1a67e13ef 100644 --- a/docs/cmdline-opts/post303.d +++ b/docs/cmdline-opts/post303.d @@ -3,6 +3,7 @@ Help: Do not switch to GET after following a 303 Protocols: HTTP See-also: post302 post301 location Added: 7.26.0 +Category: http post --- Tells curl to violate RFC 7231/6.4.4 and not convert POST requests into GET requests when following 303 redirections. A server may require a POST to diff --git a/docs/cmdline-opts/preproxy.d b/docs/cmdline-opts/preproxy.d index b8eb77fa4..a917c16ed 100644 --- a/docs/cmdline-opts/preproxy.d +++ b/docs/cmdline-opts/preproxy.d @@ -2,6 +2,7 @@ Long: preproxy Arg: [protocol://]host[:port] Help: Use this proxy first Added: 7.52.0 +Category: proxy --- Use the specified SOCKS proxy before connecting to an HTTP or HTTPS --proxy. In such a case curl first connects to the SOCKS proxy and then connects (through diff --git a/docs/cmdline-opts/progress-bar.d b/docs/cmdline-opts/progress-bar.d index f27de2d93..299d5384a 100644 --- a/docs/cmdline-opts/progress-bar.d +++ b/docs/cmdline-opts/progress-bar.d @@ -1,6 +1,7 @@ Short: # Long: progress-bar Help: Display transfer progress as a bar +Category: verbose --- Make curl display transfer progress as a simple progress bar instead of the standard, more informational, meter. diff --git a/docs/cmdline-opts/proto-default.d b/docs/cmdline-opts/proto-default.d index ccc3b85f3..1c2afea2c 100644 --- a/docs/cmdline-opts/proto-default.d +++ b/docs/cmdline-opts/proto-default.d @@ -2,6 +2,7 @@ Long: proto-default Help: Use PROTOCOL for any URL missing a scheme Arg: <protocol> Added: 7.45.0 +Category: connection curl --- Tells curl to use \fIprotocol\fP for any URL missing a scheme name. diff --git a/docs/cmdline-opts/proto-redir.d b/docs/cmdline-opts/proto-redir.d index a1205dd03..9a096f531 100644 --- a/docs/cmdline-opts/proto-redir.d +++ b/docs/cmdline-opts/proto-redir.d @@ -2,6 +2,7 @@ Long: proto-redir Arg: <protocols> Help: Enable/disable PROTOCOLS on redirect Added: 7.20.2 +Category: connection curl --- Tells curl to limit what protocols it may use on redirect. Protocols denied by --proto are not overridden by this option. See --proto for how protocols are diff --git a/docs/cmdline-opts/proto.d b/docs/cmdline-opts/proto.d index e1ece1788..46c912254 100644 --- a/docs/cmdline-opts/proto.d +++ b/docs/cmdline-opts/proto.d @@ -3,6 +3,7 @@ Arg: <protocols> Help: Enable/disable PROTOCOLS See-also: proto-redir proto-default Added: 7.20.2 +Category: connection curl --- Tells curl to limit what protocols it may use in the transfer. Protocols are evaluated left to right, are comma separated, and are each a protocol name or diff --git a/docs/cmdline-opts/proxy-anyauth.d b/docs/cmdline-opts/proxy-anyauth.d index b60d0a05e..6410c0e6a 100644 --- a/docs/cmdline-opts/proxy-anyauth.d +++ b/docs/cmdline-opts/proxy-anyauth.d @@ -2,6 +2,7 @@ Long: proxy-anyauth Help: Pick any proxy authentication method Added: 7.13.2 See-also: proxy proxy-basic proxy-digest +Category: proxy auth --- Tells curl to pick a suitable authentication method when communicating with the given HTTP proxy. This might cause an extra request/response round-trip. diff --git a/docs/cmdline-opts/proxy-basic.d b/docs/cmdline-opts/proxy-basic.d index 566f890a9..e842f9900 100644 --- a/docs/cmdline-opts/proxy-basic.d +++ b/docs/cmdline-opts/proxy-basic.d @@ -1,6 +1,7 @@ Long: proxy-basic Help: Use Basic authentication on the proxy See-also: proxy proxy-anyauth proxy-digest +Category: proxy auth --- Tells curl to use HTTP Basic authentication when communicating with the given proxy. Use --basic for enabling HTTP Basic with a remote host. Basic is the diff --git a/docs/cmdline-opts/proxy-cacert.d b/docs/cmdline-opts/proxy-cacert.d index 2713dd2a4..bbc731a28 100644 --- a/docs/cmdline-opts/proxy-cacert.d +++ b/docs/cmdline-opts/proxy-cacert.d @@ -3,5 +3,6 @@ Help: CA certificate to verify peer against for proxy Arg: <file> Added: 7.52.0 See-also: proxy-capath cacert capath proxy +Category: proxy tls --- Same as --cacert but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-capath.d b/docs/cmdline-opts/proxy-capath.d index 177246aab..cc342b755 100644 --- a/docs/cmdline-opts/proxy-capath.d +++ b/docs/cmdline-opts/proxy-capath.d @@ -3,5 +3,6 @@ Help: CA directory to verify peer against for proxy Arg: <dir> Added: 7.52.0 See-also: proxy-cacert proxy capath +Category: proxy tls --- Same as --capath but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-cert-type.d b/docs/cmdline-opts/proxy-cert-type.d index 906d2a115..fb7596c17 100644 --- a/docs/cmdline-opts/proxy-cert-type.d +++ b/docs/cmdline-opts/proxy-cert-type.d @@ -2,5 +2,6 @@ Long: proxy-cert-type Arg: <type> Added: 7.52.0 Help: Client certificate type for HTTPS proxy +Category: proxy tls --- Same as --cert-type but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-cert.d b/docs/cmdline-opts/proxy-cert.d index 43acd3950..7df2712f3 100644 --- a/docs/cmdline-opts/proxy-cert.d +++ b/docs/cmdline-opts/proxy-cert.d @@ -2,5 +2,6 @@ Long: proxy-cert Arg: <cert[:passwd]> Help: Set client certificate for proxy Added: 7.52.0 +Category: proxy tls --- Same as --cert but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-ciphers.d b/docs/cmdline-opts/proxy-ciphers.d index dcac81284..366555673 100644 --- a/docs/cmdline-opts/proxy-ciphers.d +++ b/docs/cmdline-opts/proxy-ciphers.d @@ -2,5 +2,6 @@ Long: proxy-ciphers Arg: <list> Help: SSL ciphers to use for proxy Added: 7.52.0 +Category: proxy tls --- Same as --ciphers but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-crlfile.d b/docs/cmdline-opts/proxy-crlfile.d index 1d6247f47..580dc50ce 100644 --- a/docs/cmdline-opts/proxy-crlfile.d +++ b/docs/cmdline-opts/proxy-crlfile.d @@ -2,5 +2,6 @@ Long: proxy-crlfile Arg: <file> Help: Set a CRL list for proxy Added: 7.52.0 +Category: proxy tls --- Same as --crlfile but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-digest.d b/docs/cmdline-opts/proxy-digest.d index ccf46636c..52f1fcc67 100644 --- a/docs/cmdline-opts/proxy-digest.d +++ b/docs/cmdline-opts/proxy-digest.d @@ -1,6 +1,7 @@ Long: proxy-digest Help: Use Digest authentication on the proxy See-also: proxy proxy-anyauth proxy-basic +Category: proxy tls --- Tells curl to use HTTP Digest authentication when communicating with the given proxy. Use --digest for enabling HTTP Digest with a remote host. diff --git a/docs/cmdline-opts/proxy-header.d b/docs/cmdline-opts/proxy-header.d index c1b0bb7c4..9f1121d2f 100644 --- a/docs/cmdline-opts/proxy-header.d +++ b/docs/cmdline-opts/proxy-header.d @@ -3,6 +3,7 @@ Arg: <header/@file> Help: Pass custom header(s) to proxy Protocols: HTTP Added: 7.37.0 +Category: proxy --- Extra header to include in the request when sending HTTP to a proxy. You may specify any number of extra headers. This is the equivalent option to --header diff --git a/docs/cmdline-opts/proxy-insecure.d b/docs/cmdline-opts/proxy-insecure.d index 762828f43..e123f4019 100644 --- a/docs/cmdline-opts/proxy-insecure.d +++ b/docs/cmdline-opts/proxy-insecure.d @@ -1,5 +1,6 @@ Long: proxy-insecure Help: Do HTTPS proxy connections without verifying the proxy Added: 7.52.0 +Category: proxy tls --- Same as --insecure but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-key-type.d b/docs/cmdline-opts/proxy-key-type.d index ce7482ae9..1906872ef 100644 --- a/docs/cmdline-opts/proxy-key-type.d +++ b/docs/cmdline-opts/proxy-key-type.d @@ -2,5 +2,6 @@ Long: proxy-key-type Arg: <type> Help: Private key file type for proxy Added: 7.52.0 +Category: proxy tls --- Same as --key-type but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-key.d b/docs/cmdline-opts/proxy-key.d index e61eb18a9..57d469f43 100644 --- a/docs/cmdline-opts/proxy-key.d +++ b/docs/cmdline-opts/proxy-key.d @@ -1,5 +1,6 @@ Long: proxy-key Help: Private key for HTTPS proxy Arg: <key> +Category: proxy tls --- Same as --key but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-negotiate.d b/docs/cmdline-opts/proxy-negotiate.d index 775f62a9a..72f35960e 100644 --- a/docs/cmdline-opts/proxy-negotiate.d +++ b/docs/cmdline-opts/proxy-negotiate.d @@ -2,6 +2,7 @@ Long: proxy-negotiate Help: Use HTTP Negotiate (SPNEGO) authentication on the proxy Added: 7.17.1 See-also: proxy-anyauth proxy-basic +Category: proxy auth --- Tells curl to use HTTP Negotiate (SPNEGO) authentication when communicating with the given proxy. Use --negotiate for enabling HTTP Negotiate (SPNEGO) diff --git a/docs/cmdline-opts/proxy-ntlm.d b/docs/cmdline-opts/proxy-ntlm.d index c30db53b9..cb1ba7b00 100644 --- a/docs/cmdline-opts/proxy-ntlm.d +++ b/docs/cmdline-opts/proxy-ntlm.d @@ -1,6 +1,7 @@ Long: proxy-ntlm Help: Use NTLM authentication on the proxy See-also: proxy-negotiate proxy-anyauth +Category: proxy auth --- Tells curl to use HTTP NTLM authentication when communicating with the given proxy. Use --ntlm for enabling NTLM with a remote host. diff --git a/docs/cmdline-opts/proxy-pass.d b/docs/cmdline-opts/proxy-pass.d index 3371714ba..627451bbb 100644 --- a/docs/cmdline-opts/proxy-pass.d +++ b/docs/cmdline-opts/proxy-pass.d @@ -2,5 +2,6 @@ Long: proxy-pass Arg: <phrase> Help: Pass phrase for the private key for HTTPS proxy Added: 7.52.0 +Category: proxy tls auth --- Same as --pass but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-pinnedpubkey.d b/docs/cmdline-opts/proxy-pinnedpubkey.d index abd6dc4aa..2ab79f19e 100644 --- a/docs/cmdline-opts/proxy-pinnedpubkey.d +++ b/docs/cmdline-opts/proxy-pinnedpubkey.d @@ -2,6 +2,7 @@ Long: proxy-pinnedpubkey Arg: <hashes> Help: FILE/HASHES public key to verify proxy with Protocols: TLS +Category: proxy tls --- Tells curl to use the specified public key file (or hashes) to verify the proxy. This can be a path to a file which contains a single public key in PEM diff --git a/docs/cmdline-opts/proxy-service-name.d b/docs/cmdline-opts/proxy-service-name.d index 9a73f2be6..f78072906 100644 --- a/docs/cmdline-opts/proxy-service-name.d +++ b/docs/cmdline-opts/proxy-service-name.d @@ -2,5 +2,6 @@ Long: proxy-service-name Arg: <name> Help: SPNEGO proxy service name Added: 7.43.0 +Category: proxy tls --- This option allows you to change the service name for proxy negotiation. diff --git a/docs/cmdline-opts/proxy-ssl-allow-beast.d b/docs/cmdline-opts/proxy-ssl-allow-beast.d index de96b8436..138001b36 100644 --- a/docs/cmdline-opts/proxy-ssl-allow-beast.d +++ b/docs/cmdline-opts/proxy-ssl-allow-beast.d @@ -1,5 +1,6 @@ Long: proxy-ssl-allow-beast Help: Allow security flaw for interop for HTTPS proxy Added: 7.52.0 +Category: proxy tls --- Same as --ssl-allow-beast but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-tls13-ciphers.d b/docs/cmdline-opts/proxy-tls13-ciphers.d index 08961b72e..19add2260 100644 --- a/docs/cmdline-opts/proxy-tls13-ciphers.d +++ b/docs/cmdline-opts/proxy-tls13-ciphers.d @@ -2,6 +2,7 @@ Long: proxy-tls13-ciphers Arg: <ciphersuite list> help: TLS 1.3 proxy cipher suites Protocols: TLS +Category: proxy tls --- Specifies which cipher suites to use in the connection to your HTTPS proxy when it negotiates TLS 1.3. The list of ciphers suites must specify valid diff --git a/docs/cmdline-opts/proxy-tlsauthtype.d b/docs/cmdline-opts/proxy-tlsauthtype.d index 7d0ce8e1a..5649a0f5f 100644 --- a/docs/cmdline-opts/proxy-tlsauthtype.d +++ b/docs/cmdline-opts/proxy-tlsauthtype.d @@ -2,5 +2,6 @@ Long: proxy-tlsauthtype Arg: <type> Help: TLS authentication type for HTTPS proxy Added: 7.52.0 +Category: proxy tls auth --- Same as --tlsauthtype but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-tlspassword.d b/docs/cmdline-opts/proxy-tlspassword.d index cf003844e..38a33d45d 100644 --- a/docs/cmdline-opts/proxy-tlspassword.d +++ b/docs/cmdline-opts/proxy-tlspassword.d @@ -2,5 +2,6 @@ Long: proxy-tlspassword Arg: <string> Help: TLS password for HTTPS proxy Added: 7.52.0 +Category: proxy tls auth --- Same as --tlspassword but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-tlsuser.d b/docs/cmdline-opts/proxy-tlsuser.d index 758a7c953..587f7f510 100644 --- a/docs/cmdline-opts/proxy-tlsuser.d +++ b/docs/cmdline-opts/proxy-tlsuser.d @@ -2,5 +2,6 @@ Long: proxy-tlsuser Arg: <name> Help: TLS username for HTTPS proxy Added: 7.52.0 +Category: proxy tls auth --- Same as --tlsuser but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-tlsv1.d b/docs/cmdline-opts/proxy-tlsv1.d index d024eeac3..5003f5f70 100644 --- a/docs/cmdline-opts/proxy-tlsv1.d +++ b/docs/cmdline-opts/proxy-tlsv1.d @@ -1,5 +1,6 @@ Long: proxy-tlsv1 Help: Use TLSv1 for HTTPS proxy Added: 7.52.0 +Category: proxy tls auth --- Same as --tlsv1 but used in HTTPS proxy context. diff --git a/docs/cmdline-opts/proxy-user.d b/docs/cmdline-opts/proxy-user.d index 152466daa..82fc5170f 100644 --- a/docs/cmdline-opts/proxy-user.d +++ b/docs/cmdline-opts/proxy-user.d @@ -2,6 +2,7 @@ Long: proxy-user Short: U Arg: <user:password> Help: Proxy user and password +Category: proxy auth --- Specify the user name and password to use for proxy authentication. diff --git a/docs/cmdline-opts/proxy.d b/docs/cmdline-opts/proxy.d index 6506692be..0592f13ba 100644 --- a/docs/cmdline-opts/proxy.d +++ b/docs/cmdline-opts/proxy.d @@ -2,6 +2,7 @@ Long: proxy Short: x Arg: [protocol://]host[:port] Help: Use this proxy +Category: proxy --- Use the specified proxy. diff --git a/docs/cmdline-opts/proxy1.0.d b/docs/cmdline-opts/proxy1.0.d index 4a931bd15..b8a232bf7 100644 --- a/docs/cmdline-opts/proxy1.0.d +++ b/docs/cmdline-opts/proxy1.0.d @@ -1,6 +1,7 @@ Long: proxy1.0 Arg: <host[:port]> Help: Use HTTP/1.0 proxy on given port +Category: proxy --- Use the specified HTTP 1.0 proxy. If the port number is not specified, it is assumed at port 1080. diff --git a/docs/cmdline-opts/proxytunnel.d b/docs/cmdline-opts/proxytunnel.d index 1f587f120..94dae992f 100644 --- a/docs/cmdline-opts/proxytunnel.d +++ b/docs/cmdline-opts/proxytunnel.d @@ -2,6 +2,7 @@ Long: proxytunnel Short: p Help: Operate through an HTTP proxy tunnel (using CONNECT) See-also: proxy +Category: proxy --- When an HTTP proxy is used --proxy, this option will make curl tunnel through the proxy. The tunnel approach is made with the HTTP proxy CONNECT request and diff --git a/docs/cmdline-opts/pubkey.d b/docs/cmdline-opts/pubkey.d index b2e11c024..692daf6b0 100644 --- a/docs/cmdline-opts/pubkey.d +++ b/docs/cmdline-opts/pubkey.d @@ -2,6 +2,7 @@ Long: pubkey Arg: <key> Protocols: SFTP SCP Help: SSH Public key file name +Category: sftp scp auth --- Public key file name. Allows you to provide your public key in this separate file. diff --git a/docs/cmdline-opts/quote.d b/docs/cmdline-opts/quote.d index 3da34f487..a33ed3571 100644 --- a/docs/cmdline-opts/quote.d +++ b/docs/cmdline-opts/quote.d @@ -2,6 +2,7 @@ Long: quote Short: Q Help: Send command(s) to server before transfer Protocols: FTP SFTP +Category: ftp sftp --- Send an arbitrary command to the remote FTP or SFTP server. Quote commands are diff --git a/docs/cmdline-opts/random-file.d b/docs/cmdline-opts/random-file.d index 51626f88d..c57f52364 100644 --- a/docs/cmdline-opts/random-file.d +++ b/docs/cmdline-opts/random-file.d @@ -1,6 +1,7 @@ Long: random-file Arg: <file> Help: File for reading random data from +Category: misc --- Specify the path name to file containing what will be considered as random data. The data may be used to seed the random engine for SSL connections. See diff --git a/docs/cmdline-opts/range.d b/docs/cmdline-opts/range.d index b888dd181..17c6c2aba 100644 --- a/docs/cmdline-opts/range.d +++ b/docs/cmdline-opts/range.d @@ -3,6 +3,7 @@ Short: r Help: Retrieve only the bytes within RANGE Arg: <range> Protocols: HTTP FTP SFTP FILE +Category: http ftp sftp file --- Retrieve a byte range (i.e. a partial document) from an HTTP/1.1, FTP or SFTP server or a local FILE. Ranges can be specified in a number of ways. diff --git a/docs/cmdline-opts/raw.d b/docs/cmdline-opts/raw.d index c3328e69a..90e777263 100644 --- a/docs/cmdline-opts/raw.d +++ b/docs/cmdline-opts/raw.d @@ -2,6 +2,7 @@ Long: raw Help: Do HTTP "raw"; no transfer decoding Added: 7.16.2 Protocols: HTTP +Category: http --- When used, it disables all internal HTTP decoding of content or transfer encodings and instead makes them passed on unaltered, raw. diff --git a/docs/cmdline-opts/referer.d b/docs/cmdline-opts/referer.d index cd84e9d5a..8b2057b94 100644 --- a/docs/cmdline-opts/referer.d +++ b/docs/cmdline-opts/referer.d @@ -4,6 +4,7 @@ Arg: <URL> Protocols: HTTP Help: Referrer URL See-also: user-agent header +Category: http --- Sends the "Referrer Page" information to the HTTP server. This can also be set with the --header flag of course. When used with --location you can append diff --git a/docs/cmdline-opts/remote-header-name.d b/docs/cmdline-opts/remote-header-name.d index 771b6d469..700da69fc 100644 --- a/docs/cmdline-opts/remote-header-name.d +++ b/docs/cmdline-opts/remote-header-name.d @@ -2,6 +2,7 @@ Long: remote-header-name Short: J Protocols: HTTP Help: Use the header-provided filename +Category: output --- This option tells the --remote-name option to use the server-specified Content-Disposition filename instead of extracting a filename from the URL. diff --git a/docs/cmdline-opts/remote-name-all.d b/docs/cmdline-opts/remote-name-all.d index f7a199679..299684c51 100644 --- a/docs/cmdline-opts/remote-name-all.d +++ b/docs/cmdline-opts/remote-name-all.d @@ -1,6 +1,7 @@ Long: remote-name-all Help: Use the remote file name for all URLs Added: 7.19.0 +Category: output --- This option changes the default action for all given URLs to be dealt with as if --remote-name were used for each one. So if you want to disable that for a diff --git a/docs/cmdline-opts/remote-name.d b/docs/cmdline-opts/remote-name.d index 9fed64bf4..184c32e47 100644 --- a/docs/cmdline-opts/remote-name.d +++ b/docs/cmdline-opts/remote-name.d @@ -1,6 +1,7 @@ Long: remote-name Short: O Help: Write output to a file named as the remote file +Category: important output --- Write output to a local file named like the remote file we get. (Only the file part of the remote file is used, the path is cut off.) diff --git a/docs/cmdline-opts/remote-time.d b/docs/cmdline-opts/remote-time.d index 7f6809dc3..96fb4fbe9 100644 --- a/docs/cmdline-opts/remote-time.d +++ b/docs/cmdline-opts/remote-time.d @@ -1,6 +1,7 @@ Long: remote-time Short: R Help: Set the remote file's time on the local output +Category: output --- When used, this will make curl attempt to figure out the timestamp of the remote file, and if that is available make the local file get that same diff --git a/docs/cmdline-opts/request-target.d b/docs/cmdline-opts/request-target.d index b46b4af02..df423f87d 100644 --- a/docs/cmdline-opts/request-target.d +++ b/docs/cmdline-opts/request-target.d @@ -2,6 +2,7 @@ Long: request-target Help: Specify the target for this request Protocols: HTTP Added: 7.55.0 +Category: http --- Tells curl to use an alternative "target" (path) instead of using the path as provided in the URL. Particularly useful when wanting to issue HTTP requests diff --git a/docs/cmdline-opts/request.d b/docs/cmdline-opts/request.d index 3919d426a..47c4c8b04 100644 --- a/docs/cmdline-opts/request.d +++ b/docs/cmdline-opts/request.d @@ -2,6 +2,7 @@ Long: request Short: X Arg: <command> Help: Specify request command to use +Category: connection --- (HTTP) Specifies a custom request method to use when communicating with the HTTP server. The specified request method will be used instead of the method diff --git a/docs/cmdline-opts/resolve.d b/docs/cmdline-opts/resolve.d index c1692f0f8..41f6a1bd5 100644 --- a/docs/cmdline-opts/resolve.d +++ b/docs/cmdline-opts/resolve.d @@ -2,6 +2,7 @@ Long: resolve Arg: <host:port:addr[,addr]...> Help: Resolve the host+port to this address Added: 7.21.3 +Category: connection --- Provide a custom address for a specific host and port pair. Using this, you can make the curl requests(s) use a specified address and prevent the diff --git a/docs/cmdline-opts/retry-all-errors.d b/docs/cmdline-opts/retry-all-errors.d index 4554f5938..6bda52b6e 100644 --- a/docs/cmdline-opts/retry-all-errors.d +++ b/docs/cmdline-opts/retry-all-errors.d @@ -1,6 +1,7 @@ Long: retry-all-errors Help: Retry all errors (use with --retry) Added: 7.71.0 +Category: curl --- Retry on any error. This option is used together with --retry. diff --git a/docs/cmdline-opts/retry-connrefused.d b/docs/cmdline-opts/retry-connrefused.d index 6a78e1fda..be34f973d 100644 --- a/docs/cmdline-opts/retry-connrefused.d +++ b/docs/cmdline-opts/retry-connrefused.d @@ -1,6 +1,7 @@ Long: retry-connrefused Help: Retry on connection refused (use with --retry) Added: 7.52.0 +Category: curl --- In addition to the other conditions, consider ECONNREFUSED as a transient error too for --retry. This option is used together with --retry. diff --git a/docs/cmdline-opts/retry-delay.d b/docs/cmdline-opts/retry-delay.d index 1691356d4..5645c0e6a 100644 --- a/docs/cmdline-opts/retry-delay.d +++ b/docs/cmdline-opts/retry-delay.d @@ -2,6 +2,7 @@ Long: retry-delay Arg: <seconds> Help: Wait time between retries Added: 7.12.3 +Category: curl --- Make curl sleep this amount of time before each retry when a transfer has failed with a transient error (it changes the default backoff time algorithm diff --git a/docs/cmdline-opts/retry-max-time.d b/docs/cmdline-opts/retry-max-time.d index 0920c9244..9d6faf304 100644 --- a/docs/cmdline-opts/retry-max-time.d +++ b/docs/cmdline-opts/retry-max-time.d @@ -2,6 +2,7 @@ Long: retry-max-time Arg: <seconds> Help: Retry only within this period Added: 7.12.3 +Category: curl --- The retry timer is reset before the first transfer attempt. Retries will be done as usual (see --retry) as long as the timer hasn't reached this given diff --git a/docs/cmdline-opts/retry.d b/docs/cmdline-opts/retry.d index 3db89b71c..70f6e7bfd 100644 --- a/docs/cmdline-opts/retry.d +++ b/docs/cmdline-opts/retry.d @@ -2,6 +2,7 @@ Long: retry Arg: <num> Added: 7.12.3 Help: Retry request if transient problems occur +Category: curl --- If a transient error is returned when curl tries to perform a transfer, it will retry this number of times before giving up. Setting the number to 0 diff --git a/docs/cmdline-opts/sasl-authzid.d b/docs/cmdline-opts/sasl-authzid.d index a3bd46e70..e802c80a1 100644 --- a/docs/cmdline-opts/sasl-authzid.d +++ b/docs/cmdline-opts/sasl-authzid.d @@ -2,6 +2,7 @@ Long: sasl-authzid Arg: <identity> Help: Identity for SASL PLAIN authentication Added: 7.66.0 +Category: auth --- Use this authorisation identity (authzid), during SASL PLAIN authentication, in addition to the authentication identity (authcid) as specified by --user. diff --git a/docs/cmdline-opts/sasl-ir.d b/docs/cmdline-opts/sasl-ir.d index c0dab9463..0041c3b4e 100644 --- a/docs/cmdline-opts/sasl-ir.d +++ b/docs/cmdline-opts/sasl-ir.d @@ -1,5 +1,6 @@ Long: sasl-ir Help: Enable initial response in SASL authentication Added: 7.31.0 +Category: auth --- Enable initial response in SASL authentication. diff --git a/docs/cmdline-opts/service-name.d b/docs/cmdline-opts/service-name.d index 4dfeb27d6..c64496b85 100644 --- a/docs/cmdline-opts/service-name.d +++ b/docs/cmdline-opts/service-name.d @@ -2,6 +2,7 @@ Long: service-name Help: SPNEGO service name Arg: <name> Added: 7.43.0 +Category: misc --- This option allows you to change the service name for SPNEGO. diff --git a/docs/cmdline-opts/show-error.d b/docs/cmdline-opts/show-error.d index 0dbf99d40..2124409e5 100644 --- a/docs/cmdline-opts/show-error.d +++ b/docs/cmdline-opts/show-error.d @@ -2,5 +2,6 @@ Long: show-error Short: S Help: Show error even when -s is used See-also: no-progress-meter +Category: curl --- When used with --silent, it makes curl show an error message if it fails. diff --git a/docs/cmdline-opts/silent.d b/docs/cmdline-opts/silent.d index 065d8ec4e..58a522335 100644 --- a/docs/cmdline-opts/silent.d +++ b/docs/cmdline-opts/silent.d @@ -2,6 +2,7 @@ Long: silent Short: s Help: Silent mode See-also: verbose stderr no-progress-meter +Category: important verbose --- Silent or quiet mode. Don't show progress meter or error messages. Makes Curl mute. It will still output the data you ask for, potentially even to the diff --git a/docs/cmdline-opts/socks4.d b/docs/cmdline-opts/socks4.d index 11f6ae033..bc095d546 100644 --- a/docs/cmdline-opts/socks4.d +++ b/docs/cmdline-opts/socks4.d @@ -2,6 +2,7 @@ Long: socks4 Arg: <host[:port]> Help: SOCKS4 proxy on given host + port Added: 7.15.2 +Category: proxy --- Use the specified SOCKS4 proxy. If the port number is not specified, it is assumed at port 1080. diff --git a/docs/cmdline-opts/socks4a.d b/docs/cmdline-opts/socks4a.d index ae254ae0e..d3177a9d7 100644 --- a/docs/cmdline-opts/socks4a.d +++ b/docs/cmdline-opts/socks4a.d @@ -2,6 +2,7 @@ Long: socks4a Arg: <host[:port]> Help: SOCKS4a proxy on given host + port Added: 7.18.0 +Category: proxy --- Use the specified SOCKS4a proxy. If the port number is not specified, it is assumed at port 1080. diff --git a/docs/cmdline-opts/socks5-basic.d b/docs/cmdline-opts/socks5-basic.d index 67d16b3a6..52d1e6619 100644 --- a/docs/cmdline-opts/socks5-basic.d +++ b/docs/cmdline-opts/socks5-basic.d @@ -1,6 +1,7 @@ Long: socks5-basic Help: Enable username/password auth for SOCKS5 proxies Added: 7.55.0 +Category: proxy auth --- Tells curl to use username/password authentication when connecting to a SOCKS5 proxy. The username/password authentication is enabled by default. Use diff --git a/docs/cmdline-opts/socks5-gssapi-nec.d b/docs/cmdline-opts/socks5-gssapi-nec.d index 477e218e3..b538f33f3 100644 --- a/docs/cmdline-opts/socks5-gssapi-nec.d +++ b/docs/cmdline-opts/socks5-gssapi-nec.d @@ -1,6 +1,7 @@ Long: socks5-gssapi-nec Help: Compatibility with NEC SOCKS5 server Added: 7.19.4 +Category: proxy auth --- As part of the GSS-API negotiation a protection mode is negotiated. RFC 1961 says in section 4.3/4.4 it should be protected, but the NEC reference diff --git a/docs/cmdline-opts/socks5-gssapi-service.d b/docs/cmdline-opts/socks5-gssapi-service.d index eb3b2407b..e61d0f5ab 100644 --- a/docs/cmdline-opts/socks5-gssapi-service.d +++ b/docs/cmdline-opts/socks5-gssapi-service.d @@ -2,6 +2,7 @@ Long: socks5-gssapi-service Arg: <name> Help: SOCKS5 proxy service name for GSS-API Added: 7.19.4 +Category: proxy auth --- The default service name for a socks server is rcmd/server-fqdn. This option allows you to change it. diff --git a/docs/cmdline-opts/socks5-gssapi.d b/docs/cmdline-opts/socks5-gssapi.d index 0070f37eb..72ae7aeb2 100644 --- a/docs/cmdline-opts/socks5-gssapi.d +++ b/docs/cmdline-opts/socks5-gssapi.d @@ -1,6 +1,7 @@ Long: socks5-gssapi Help: Enable GSS-API auth for SOCKS5 proxies Added: 7.55.0 +Category: proxy auth --- Tells curl to use GSS-API authentication when connecting to a SOCKS5 proxy. The GSS-API authentication is enabled by default (if curl is compiled with diff --git a/docs/cmdline-opts/socks5-hostname.d b/docs/cmdline-opts/socks5-hostname.d index 9d9d946e5..247d7660e 100644 --- a/docs/cmdline-opts/socks5-hostname.d +++ b/docs/cmdline-opts/socks5-hostname.d @@ -2,6 +2,7 @@ Long: socks5-hostname Arg: <host[:port]> Help: SOCKS5 proxy, pass host name to proxy Added: 7.18.0 +Category: proxy --- Use the specified SOCKS5 proxy (and let the proxy resolve the host name). If the port number is not specified, it is assumed at port 1080. diff --git a/docs/cmdline-opts/socks5.d b/docs/cmdline-opts/socks5.d index 22fae7629..bbe92f0a1 100644 --- a/docs/cmdline-opts/socks5.d +++ b/docs/cmdline-opts/socks5.d @@ -2,6 +2,7 @@ Long: socks5 Arg: <host[:port]> Help: SOCKS5 proxy on given host + port Added: 7.18.0 +Category: proxy --- Use the specified SOCKS5 proxy - but resolve the host name locally. If the port number is not specified, it is assumed at port 1080. diff --git a/docs/cmdline-opts/speed-limit.d b/docs/cmdline-opts/speed-limit.d index e2b81c79a..3f9ad3a46 100644 --- a/docs/cmdline-opts/speed-limit.d +++ b/docs/cmdline-opts/speed-limit.d @@ -2,6 +2,7 @@ Long: speed-limit Short: Y Arg: <speed> Help: Stop transfers slower than this +Category: connection --- If a download is slower than this given speed (in bytes per second) for speed-time seconds it gets aborted. speed-time is set with --speed-time and is diff --git a/docs/cmdline-opts/speed-time.d b/docs/cmdline-opts/speed-time.d index 98d6ae13c..81acabec4 100644 --- a/docs/cmdline-opts/speed-time.d +++ b/docs/cmdline-opts/speed-time.d @@ -2,6 +2,7 @@ Long: speed-time Short: y Arg: <seconds> Help: Trigger 'speed-limit' abort after this time +Category: connection --- If a download is slower than speed-limit bytes per second during a speed-time period, the download gets aborted. If speed-time is used, the default diff --git a/docs/cmdline-opts/ssl-allow-beast.d b/docs/cmdline-opts/ssl-allow-beast.d index 973fcd451..f18fe7470 100644 --- a/docs/cmdline-opts/ssl-allow-beast.d +++ b/docs/cmdline-opts/ssl-allow-beast.d @@ -1,6 +1,7 @@ Long: ssl-allow-beast Help: Allow security flaw to improve interop Added: 7.25.0 +Category: tls --- This option tells curl to not work around a security flaw in the SSL3 and TLS1.0 protocols known as BEAST. If this option isn't used, the SSL layer may diff --git a/docs/cmdline-opts/ssl-no-revoke.d b/docs/cmdline-opts/ssl-no-revoke.d index f94b11143..3b1614243 100644 --- a/docs/cmdline-opts/ssl-no-revoke.d +++ b/docs/cmdline-opts/ssl-no-revoke.d @@ -1,6 +1,7 @@ Long: ssl-no-revoke Help: Disable cert revocation checks (Schannel) Added: 7.44.0 +Category: tls --- (Schannel) This option tells curl to disable certificate revocation checks. WARNING: this option loosens the SSL security, and by using this flag you ask diff --git a/docs/cmdline-opts/ssl-reqd.d b/docs/cmdline-opts/ssl-reqd.d index 3c6f8a257..2e573e39d 100644 --- a/docs/cmdline-opts/ssl-reqd.d +++ b/docs/cmdline-opts/ssl-reqd.d @@ -2,6 +2,7 @@ Long: ssl-reqd Help: Require SSL/TLS Protocols: FTP IMAP POP3 SMTP Added: 7.20.0 +Category: tls --- Require SSL/TLS for the connection. Terminates the connection if the server doesn't support SSL/TLS. diff --git a/docs/cmdline-opts/ssl-revoke-best-effort.d b/docs/cmdline-opts/ssl-revoke-best-effort.d index e339b8af0..af22da461 100644 --- a/docs/cmdline-opts/ssl-revoke-best-effort.d +++ b/docs/cmdline-opts/ssl-revoke-best-effort.d @@ -1,6 +1,7 @@ Long: ssl-revoke-best-effort Help: Ignore missing/offline cert CRL dist points Added: 7.70.0 +Category: tls --- (Schannel) This option tells curl to ignore certificate revocation checks when they failed due to missing/offline distribution points for the revocation check diff --git a/docs/cmdline-opts/ssl.d b/docs/cmdline-opts/ssl.d index dabd83761..8df460106 100644 --- a/docs/cmdline-opts/ssl.d +++ b/docs/cmdline-opts/ssl.d @@ -2,6 +2,7 @@ Long: ssl Help: Try SSL/TLS Protocols: FTP IMAP POP3 SMTP Added: 7.20.0 +Category: tls --- Try to use SSL/TLS for the connection. Reverts to a non-secure connection if diff --git a/docs/cmdline-opts/sslv2.d b/docs/cmdline-opts/sslv2.d index 67d2b8506..773ab691e 100644 --- a/docs/cmdline-opts/sslv2.d +++ b/docs/cmdline-opts/sslv2.d @@ -7,6 +7,7 @@ Mutexed: sslv3 tlsv1 tlsv1.1 tlsv1.2 Requires: TLS See-also: http1.1 http2 Help: Use SSLv2 +Category: tls --- Forces curl to use SSL version 2 when negotiating with a remote SSL server. Sometimes curl is built without SSLv2 support. SSLv2 is widely diff --git a/docs/cmdline-opts/sslv3.d b/docs/cmdline-opts/sslv3.d index 101ad1004..7beed8f81 100644 --- a/docs/cmdline-opts/sslv3.d +++ b/docs/cmdline-opts/sslv3.d @@ -7,6 +7,7 @@ Mutexed: sslv2 tlsv1 tlsv1.1 tlsv1.2 Requires: TLS See-also: http1.1 http2 Help: Use SSLv3 +Category: tls --- Forces curl to use SSL version 3 when negotiating with a remote SSL server. Sometimes curl is built without SSLv3 support. SSLv3 is widely diff --git a/docs/cmdline-opts/stderr.d b/docs/cmdline-opts/stderr.d index e8cf7ba68..6da040159 100644 --- a/docs/cmdline-opts/stderr.d +++ b/docs/cmdline-opts/stderr.d @@ -1,6 +1,7 @@ Long: stderr Help: Where to redirect stderr See-also: verbose silent +Category: verbose --- Redirect all writes to stderr to the specified file instead. If the file name is a plain '-', it is instead written to stdout. diff --git a/docs/cmdline-opts/styled-output.d b/docs/cmdline-opts/styled-output.d index e4751aecb..8aa4a0f05 100644 --- a/docs/cmdline-opts/styled-output.d +++ b/docs/cmdline-opts/styled-output.d @@ -1,6 +1,7 @@ Long: styled-output Help: Enable styled output for HTTP headers Added: 7.61.0 +Category: verbose --- Enables the automatic use of bold font styles when writing HTTP headers to the terminal. Use --no-styled-output to switch them off. diff --git a/docs/cmdline-opts/suppress-connect-headers.d b/docs/cmdline-opts/suppress-connect-headers.d index d208b8917..2ab9f3f48 100644 --- a/docs/cmdline-opts/suppress-connect-headers.d +++ b/docs/cmdline-opts/suppress-connect-headers.d @@ -1,6 +1,7 @@ Long: suppress-connect-headers Help: Suppress proxy CONNECT response headers See-also: dump-header include proxytunnel +Category: misc --- When --proxytunnel is used and a CONNECT request is made don't output proxy CONNECT response headers. This option is meant to be used with --dump-header or diff --git a/docs/cmdline-opts/tcp-fastopen.d b/docs/cmdline-opts/tcp-fastopen.d index 08e141df7..faef499f3 100644 --- a/docs/cmdline-opts/tcp-fastopen.d +++ b/docs/cmdline-opts/tcp-fastopen.d @@ -1,5 +1,6 @@ Long: tcp-fastopen Added: 7.49.0 Help: Use TCP Fast Open +Category: connection --- Enable use of TCP Fast Open (RFC7413). diff --git a/docs/cmdline-opts/tcp-nodelay.d b/docs/cmdline-opts/tcp-nodelay.d index f047a7c6f..f1cf644a4 100644 --- a/docs/cmdline-opts/tcp-nodelay.d +++ b/docs/cmdline-opts/tcp-nodelay.d @@ -1,6 +1,7 @@ Long: tcp-nodelay Help: Use the TCP_NODELAY option Added: 7.11.2 +Category: connection --- Turn on the TCP_NODELAY option. See the \fIcurl_easy_setopt(3)\fP man page for details about this option. diff --git a/docs/cmdline-opts/telnet-option.d b/docs/cmdline-opts/telnet-option.d index a67cb627b..789de3ea1 100644 --- a/docs/cmdline-opts/telnet-option.d +++ b/docs/cmdline-opts/telnet-option.d @@ -2,6 +2,7 @@ Long: telnet-option Short: t Arg: <opt=val> Help: Set telnet option +Category: telnet --- Pass options to the telnet protocol. Supported options are: diff --git a/docs/cmdline-opts/tftp-blksize.d b/docs/cmdline-opts/tftp-blksize.d index c184328de..6e67ed2e1 100644 --- a/docs/cmdline-opts/tftp-blksize.d +++ b/docs/cmdline-opts/tftp-blksize.d @@ -3,6 +3,7 @@ Arg: <value> Help: Set TFTP BLKSIZE option Protocols: TFTP Added: 7.20.0 +Category: tftp --- Set TFTP BLKSIZE option (must be >512). This is the block size that curl will try to use when transferring data to or from a TFTP server. By default 512 diff --git a/docs/cmdline-opts/tftp-no-options.d b/docs/cmdline-opts/tftp-no-options.d index e2a4dacd5..023327301 100644 --- a/docs/cmdline-opts/tftp-no-options.d +++ b/docs/cmdline-opts/tftp-no-options.d @@ -2,6 +2,7 @@ Long: tftp-no-options Help: Do not send any TFTP options Protocols: TFTP Added: 7.48.0 +Category: tftp --- Tells curl not to send TFTP options requests. diff --git a/docs/cmdline-opts/time-cond.d b/docs/cmdline-opts/time-cond.d index 830b4e1a2..f733eeb0b 100644 --- a/docs/cmdline-opts/time-cond.d +++ b/docs/cmdline-opts/time-cond.d @@ -3,6 +3,7 @@ Short: z Arg: <time> Help: Transfer based on a time condition Protocols: HTTP FTP +Category: http ftp --- Request a file that has been modified later than the given time and date, or one that has been modified before that time. The <date expression> can be all diff --git a/docs/cmdline-opts/tls-max.d b/docs/cmdline-opts/tls-max.d index 475c12fe8..07eb65465 100644 --- a/docs/cmdline-opts/tls-max.d +++ b/docs/cmdline-opts/tls-max.d @@ -6,6 +6,7 @@ Added: 7.54.0 Requires: TLS See-also: tlsv1.0 tlsv1.1 tlsv1.2 tlsv1.3 Help: Set maximum allowed TLS version +Category: tls --- VERSION defines maximum supported TLS version. The minimum acceptable version is set by tlsv1.0, tlsv1.1, tlsv1.2 or tlsv1.3. diff --git a/docs/cmdline-opts/tls13-ciphers.d b/docs/cmdline-opts/tls13-ciphers.d index db8033525..0f906ce40 100644 --- a/docs/cmdline-opts/tls13-ciphers.d +++ b/docs/cmdline-opts/tls13-ciphers.d @@ -2,6 +2,7 @@ Long: tls13-ciphers Arg: <ciphersuite list> help: TLS 1.3 cipher suites to use Protocols: TLS +Category: tls --- Specifies which cipher suites to use in the connection if it negotiates TLS 1.3. The list of ciphers suites must specify valid ciphers. Read up on TLS 1.3 diff --git a/docs/cmdline-opts/tlsauthtype.d b/docs/cmdline-opts/tlsauthtype.d index ede21c2f7..5b283cf9b 100644 --- a/docs/cmdline-opts/tlsauthtype.d +++ b/docs/cmdline-opts/tlsauthtype.d @@ -2,6 +2,7 @@ Long: tlsauthtype Arg: <type> Help: TLS authentication type Added: 7.21.4 +Category: tls auth --- Set TLS authentication type. Currently, the only supported option is "SRP", for TLS-SRP (RFC 5054). If --tlsuser and --tlspassword are specified but diff --git a/docs/cmdline-opts/tlspassword.d b/docs/cmdline-opts/tlspassword.d index b2e65362e..5c6a0fa51 100644 --- a/docs/cmdline-opts/tlspassword.d +++ b/docs/cmdline-opts/tlspassword.d @@ -1,6 +1,7 @@ Long: tlspassword Help: TLS password Added: 7.21.4 +Category: tls auth --- Set password for use with the TLS authentication method specified with --tlsauthtype. Requires that --tlsuser also be set. diff --git a/docs/cmdline-opts/tlsuser.d b/docs/cmdline-opts/tlsuser.d index 7192b9f1d..ada152608 100644 --- a/docs/cmdline-opts/tlsuser.d +++ b/docs/cmdline-opts/tlsuser.d @@ -2,6 +2,7 @@ Long: tlsuser Arg: <name> Help: TLS user name Added: 7.21.4 +Category: tls auth --- Set username for use with the TLS authentication method specified with --tlsauthtype. Requires that --tlspassword also is set. diff --git a/docs/cmdline-opts/tlsv1.0.d b/docs/cmdline-opts/tlsv1.0.d index 2b1f0156a..4f0176f31 100644 --- a/docs/cmdline-opts/tlsv1.0.d +++ b/docs/cmdline-opts/tlsv1.0.d @@ -2,6 +2,7 @@ Long: tlsv1.0 Help: Use TLSv1.0 or greater Protocols: TLS Added: 7.34.0 +Category: tls --- Forces curl to use TLS version 1.0 or later when connecting to a remote TLS server. diff --git a/docs/cmdline-opts/tlsv1.1.d b/docs/cmdline-opts/tlsv1.1.d index 405d552bb..b3649f7f4 100644 --- a/docs/cmdline-opts/tlsv1.1.d +++ b/docs/cmdline-opts/tlsv1.1.d @@ -2,6 +2,7 @@ Long: tlsv1.1 Help: Use TLSv1.1 or greater Protocols: TLS Added: 7.34.0 +Category: tls --- Forces curl to use TLS version 1.1 or later when connecting to a remote TLS server. diff --git a/docs/cmdline-opts/tlsv1.2.d b/docs/cmdline-opts/tlsv1.2.d index bdf1fcf62..dffbccb9d 100644 --- a/docs/cmdline-opts/tlsv1.2.d +++ b/docs/cmdline-opts/tlsv1.2.d @@ -2,6 +2,7 @@ Long: tlsv1.2 Help: Use TLSv1.2 or greater Protocols: TLS Added: 7.34.0 +Category: tls --- Forces curl to use TLS version 1.2 or later when connecting to a remote TLS server. diff --git a/docs/cmdline-opts/tlsv1.3.d b/docs/cmdline-opts/tlsv1.3.d index 19da857b7..37d953552 100644 --- a/docs/cmdline-opts/tlsv1.3.d +++ b/docs/cmdline-opts/tlsv1.3.d @@ -2,6 +2,7 @@ Long: tlsv1.3 Help: Use TLSv1.3 or greater Protocols: TLS Added: 7.52.0 +Category: tls --- Forces curl to use TLS version 1.3 or later when connecting to a remote TLS server. diff --git a/docs/cmdline-opts/tlsv1.d b/docs/cmdline-opts/tlsv1.d index 4cb405697..d4c0c5160 100644 --- a/docs/cmdline-opts/tlsv1.d +++ b/docs/cmdline-opts/tlsv1.d @@ -7,6 +7,7 @@ Mutexed: tlsv1.1 tlsv1.2 tlsv1.3 Requires: TLS See-also: http1.1 http2 Help: Use TLSv1.0 or greater +Category: tls --- Tells curl to use at least TLS version 1.x when negotiating with a remote TLS server. That means TLS version 1.0 or higher diff --git a/docs/cmdline-opts/tr-encoding.d b/docs/cmdline-opts/tr-encoding.d index 01bb62bb3..ce1d00325 100644 --- a/docs/cmdline-opts/tr-encoding.d +++ b/docs/cmdline-opts/tr-encoding.d @@ -2,6 +2,7 @@ Long: tr-encoding Added: 7.21.6 Help: Request compressed transfer encoding Protocols: HTTP +Category: http --- Request a compressed Transfer-Encoding response using one of the algorithms curl supports, and uncompress the data while receiving it. diff --git a/docs/cmdline-opts/trace-ascii.d b/docs/cmdline-opts/trace-ascii.d index fceaa7126..fa7e16ccc 100644 --- a/docs/cmdline-opts/trace-ascii.d +++ b/docs/cmdline-opts/trace-ascii.d @@ -2,6 +2,7 @@ Long: trace-ascii Arg: <file> Help: Like --trace, but without hex output Mutexed: trace verbose +Category: verbose --- Enables a full trace dump of all incoming and outgoing data, including descriptive information, to the given output file. Use "-" as filename to have diff --git a/docs/cmdline-opts/trace-time.d b/docs/cmdline-opts/trace-time.d index 27dcc42cf..19a31a70e 100644 --- a/docs/cmdline-opts/trace-time.d +++ b/docs/cmdline-opts/trace-time.d @@ -1,5 +1,6 @@ Long: trace-time Help: Add time stamps to trace/verbose output Added: 7.14.0 +Category: verbose --- Prepends a time stamp to each trace or verbose line that curl displays. diff --git a/docs/cmdline-opts/trace.d b/docs/cmdline-opts/trace.d index 334ea5ad6..502dafd71 100644 --- a/docs/cmdline-opts/trace.d +++ b/docs/cmdline-opts/trace.d @@ -2,6 +2,7 @@ Long: trace Arg: <file> Help: Write a debug trace to FILE Mutexed: verbose trace-ascii +Category: verbose --- Enables a full trace dump of all incoming and outgoing data, including descriptive information, to the given output file. Use "-" as filename to have diff --git a/docs/cmdline-opts/unix-socket.d b/docs/cmdline-opts/unix-socket.d index 812d20f3b..e4ea91d01 100644 --- a/docs/cmdline-opts/unix-socket.d +++ b/docs/cmdline-opts/unix-socket.d @@ -3,5 +3,6 @@ Arg: <path> Help: Connect through this Unix domain socket Added: 7.40.0 Protocols: HTTP +Category: connection --- Connect through this Unix domain socket, instead of using the network. diff --git a/docs/cmdline-opts/upload-file.d b/docs/cmdline-opts/upload-file.d index 6f01dbf35..63584b797 100644 --- a/docs/cmdline-opts/upload-file.d +++ b/docs/cmdline-opts/upload-file.d @@ -2,6 +2,7 @@ Long: upload-file Short: T Arg: <file> Help: Transfer local FILE to destination +Category: important upload --- This transfers the specified local file to the remote URL. If there is no file part in the specified URL, curl will append the local file name. NOTE that you diff --git a/docs/cmdline-opts/url.d b/docs/cmdline-opts/url.d index 991f1f27c..30f0bf72e 100644 --- a/docs/cmdline-opts/url.d +++ b/docs/cmdline-opts/url.d @@ -1,6 +1,7 @@ Long: url Arg: <url> Help: URL to work with +Category: curl --- Specify a URL to fetch. This option is mostly handy when you want to specify URL(s) in a config file. diff --git a/docs/cmdline-opts/use-ascii.d b/docs/cmdline-opts/use-ascii.d index d59fad922..3a5a6a4f8 100644 --- a/docs/cmdline-opts/use-ascii.d +++ b/docs/cmdline-opts/use-ascii.d @@ -2,6 +2,7 @@ Short: B Long: use-ascii Help: Use ASCII/text transfer Protocols: FTP LDAP +Category: misc --- Enable ASCII transfer. For FTP, this can also be enforced by using a URL that ends with ";type=A". This option causes data sent to stdout to be in text mode diff --git a/docs/cmdline-opts/user-agent.d b/docs/cmdline-opts/user-agent.d index c6dd2e584..ec2ca82bb 100644 --- a/docs/cmdline-opts/user-agent.d +++ b/docs/cmdline-opts/user-agent.d @@ -3,6 +3,7 @@ Long: user-agent Arg: <name> Help: Send User-Agent <name> to server Protocols: HTTP +Category: important http --- Specify the User-Agent string to send to the HTTP server. To encode blanks in diff --git a/docs/cmdline-opts/user.d b/docs/cmdline-opts/user.d index 7001d28ab..b588700c0 100644 --- a/docs/cmdline-opts/user.d +++ b/docs/cmdline-opts/user.d @@ -2,6 +2,7 @@ Long: user Short: u Arg: <user:password> Help: Server user and password +Category: important auth --- Specify the user name and password to use for server authentication. Overrides --netrc and --netrc-optional. diff --git a/docs/cmdline-opts/verbose.d b/docs/cmdline-opts/verbose.d index 5d3352183..8db1ea222 100644 --- a/docs/cmdline-opts/verbose.d +++ b/docs/cmdline-opts/verbose.d @@ -3,6 +3,7 @@ Long: verbose Mutexed: trace trace-ascii Help: Make the operation more talkative See-also: include +Category: important verbose --- Makes curl verbose during the operation. Useful for debugging and seeing what's going on "under the hood". A line starting with '>' means "header data" diff --git a/docs/cmdline-opts/version.d b/docs/cmdline-opts/version.d index 16c1843f1..52c29f177 100644 --- a/docs/cmdline-opts/version.d +++ b/docs/cmdline-opts/version.d @@ -1,6 +1,7 @@ Long: version Short: V Help: Show version number and quit +Category: important curl --- Displays information about curl and the libcurl version it uses. diff --git a/docs/cmdline-opts/write-out.d b/docs/cmdline-opts/write-out.d index 686bda6ea..013319cc2 100644 --- a/docs/cmdline-opts/write-out.d +++ b/docs/cmdline-opts/write-out.d @@ -2,6 +2,7 @@ Long: write-out Short: w Arg: <format> Help: Use output FORMAT after completion +Category: verbose --- Make curl display information on stdout after a completed transfer. The format is a string that may contain plain text mixed with any number of diff --git a/docs/cmdline-opts/xattr.d b/docs/cmdline-opts/xattr.d index b7553daeb..4b64c6cbf 100644 --- a/docs/cmdline-opts/xattr.d +++ b/docs/cmdline-opts/xattr.d @@ -1,5 +1,6 @@ Long: xattr Help: Store metadata in extended file attributes +Category: misc --- When saving output to a file, this option tells curl to store certain file metadata in extended file attributes. Currently, the URL is stored in the |