metalink: show help message even if disabled

Print message if --metalink is used while metalink support is not
enabled. Migrated Metalink support in tool_operate.c and removed
operatemetalink().

1 files changed, 6 insertions, 930 deletions

diff --git a/src/tool_metalink.c b/src/tool_metalink.c
index 558fa8fa0..a57297b78 100644
--- a/src/tool_metalink.c
+++ b/src/tool_metalink.c
@@ -20,80 +20,10 @@
  *
  ***************************************************************************/
 #include "tool_setup.h"
-
-#ifdef HAVE_UNISTD_H
-#  include <unistd.h>
-#endif
-
-#ifdef HAVE_UTIME_H
-#  include <utime.h>
-#elif defined(HAVE_SYS_UTIME_H)
-#  include <sys/utime.h>
-#endif
-
-#define ENABLE_CURLX_PRINTF
-/* use our own printf() functions */
-#include "curlx.h"
-
 #include "tool_metalink.h"
-#include "tool_binmode.h"
-#include "tool_cb_prg.h"
-#include "tool_cb_wrt.h"
-#include "tool_cb_rea.h"
-#include "tool_cb_see.h"
-#include "tool_cb_dbg.h"
-#include "tool_dirhie.h"
-#include "tool_util.h"
-#include "tool_main.h"
-#include "tool_msgs.h"
-#include "tool_setopt.h"
-#include "tool_sleep.h"
-#include "tool_writeout.h"
-#include "tool_libinfo.h"
-#include "tool_homedir.h"
-#include "tool_cb_hdr.h"
 
 #include "memdebug.h" /* keep this as LAST include */
 
-static int curl_truncate_file(struct Configurable *config,
-                              struct OutStruct outs)
-{
-  int res = 0;
-  if(outs.bytes && outs.filename) {
-    /* We have written data to a output file, we truncate file
-     */
-    if(!config->mute)
-      fprintf(config->errors, "Throwing away %"
-              CURL_FORMAT_CURL_OFF_T " bytes\n",
-              outs.bytes);
-    fflush(outs.stream);
-    /* truncate file at the position where we started appending */
-#ifdef HAVE_FTRUNCATE
-    if(ftruncate( fileno(outs.stream), outs.init)) {
-      /* when truncate fails, we can't just append as then we'll
-         create something strange, bail out */
-      if(!config->mute)
-        fprintf(config->errors,
-                "failed to truncate, exiting\n");
-      res = CURLE_WRITE_ERROR;
-      assert(0);
-      /* goto quit_urls; */
-    }
-    /* now seek to the end of the file, the position where we
-       just truncated the file in a large file-safe way */
-    fseek(outs.stream, 0, SEEK_END);
-#else
-    /* ftruncate is not available, so just reposition the file
-       to the location we would have truncated it. This won't
-       work properly with large files on 32-bit systems, but
-       most of those will have ftruncate. */
-    fseek(outs.stream, (long)outs.init, SEEK_SET);
-#endif
-    outs.bytes = 0; /* clear for next round */
-  }
-  return res;
-}
-
 struct metalinkfile *new_metalinkfile(metalink_file_t *metalinkfile) {
   struct metalinkfile *f;
   f = (struct metalinkfile*)malloc(sizeof(struct metalinkfile));
@@ -110,866 +40,12 @@ struct metalink *new_metalink(metalink_t *metalink) {
   return ml;
 }
 
-int operatemetalink(CURL *curl,
-                    struct getout *urlnode,
-                    long retry_sleep_default,
-                    struct OutStruct outs,
-                    struct OutStruct heads,
-                    char *outfiles,
-                    struct Configurable *config)
+int count_next_metalink_resource(struct metalinkfile *mlfile)
 {
-  long retry_numretries;
-  int infd = STDIN_FILENO;
-  bool infdopen;
-  char *outfile;
-  struct timeval retrystart;
-  struct metalinkfile *mlfile;
-  int res = 0;
-  char *filename;
+  int count = 0;
   metalink_resource_t **mlres;
-  char errorbuffer[CURL_ERROR_SIZE];
-  struct ProgressData progressbar;
-  long retry_sleep;
-  struct InStruct input;
-  curl_off_t uploadfilesize; /* -1 means unknown */
-  char *uploadfile=NULL; /* a single file, never a glob */
-
-  uploadfilesize=-1;
-
-  mlfile = config->metalinkfile_last;
-  config->metalinkfile_last = config->metalinkfile_last->next;
-
-  filename = strdup(mlfile->file->name);
-
-  outfile = outfiles?strdup(outfiles):NULL;
-
-  if((urlnode->flags & GETOUT_USEREMOTE) ||
-     (outfile && !curlx_strequal("-", outfile)) ) {
-
-    /*
-     * We have specified a file name to store the result in, or we have
-     * decided we want to use the name attribute of file element in Metalink
-     * XML.
-     */
-
-    if(!outfile) {
-      /* Find and get file name */
-      char * pc;
-      pc = strrchr(filename, '/');
-
-      if(pc) {
-        /* duplicate the string beyond the slash */
-        pc++;
-        outfile = *pc ? strdup(pc): NULL;
-      }
-      else {
-        outfile = strdup(filename);
-      }
-
-      if(!outfile || !*outfile) {
-        helpf(config->errors, "Metalink file[@name] has no length!\n");
-        res = CURLE_WRITE_ERROR;
-        free(filename);
-        /* break; */
-        return 1;
-      }
-#if defined(MSDOS)
-      {
-        /* This is for DOS, and then we do some major replacing of
-           bad characters in the file name before using it */
-        char file1[PATH_MAX];
-        if(strlen(outfile) >= PATH_MAX)
-          outfile[PATH_MAX-1]=0; /* cut it */
-        strcpy(file1, msdosify(outfile));
-        free(outfile);
-
-        outfile = strdup(rename_if_dos_device_name(file1));
-        if(!outfile) {
-          res = CURLE_OUT_OF_MEMORY;
-          break;
-        }
-      }
-#endif /* MSDOS */
-    }
-    /* Create the directory hierarchy, if not pre-existant to a multiple
-       file output call */
-
-    if(config->create_dirs &&
-       (CURLE_WRITE_ERROR == create_dir_hierarchy(outfile, config->errors)))
-      return CURLE_WRITE_ERROR;
-
-    if(config->resume_from_current) {
-      /* We're told to continue from where we are now. Get the
-         size of the file as it is now and open it for append instead */
-
-      struct_stat fileinfo;
-
-      /* VMS -- Danger, the filesize is only valid for stream files */
-      if(0 == stat(outfile, &fileinfo))
-        /* set offset to current file size: */
-        config->resume_from = fileinfo.st_size;
-      else
-        /* let offset be 0 */
-        config->resume_from = 0;
-    }
-
-    outs.filename = outfile;
-    outs.s_isreg = TRUE;
-
-    if(config->resume_from) {
-      outs.init = config->resume_from;
-      /* open file for output: */
-      outs.stream=(FILE *) fopen(outfile, config->resume_from?"ab":"wb");
-      if(!outs.stream) {
-        helpf(config->errors, "Can't open '%s'!\n", outfile);
-        return CURLE_WRITE_ERROR;
-      }
-    }
-    else {
-      outs.stream = NULL; /* open when needed */
-    }
-  }
-  infdopen=FALSE;
-
-  if(!config->errors)
-    config->errors = stderr;
-
-  if(!outfile && !config->use_ascii) {
-    /* We get the output to stdout and we have not got the ASCII/text
-       flag, then set stdout to be binary */
-    set_binmode(stdout);
-  }
-
-  /* Loop though all resources in Metalink */
-  for(mlres = mlfile->file->resources; *mlres; ++mlres) {
-    int try_next_res = 0;
-    if(config->tcp_nodelay)
-      my_setopt(curl, CURLOPT_TCP_NODELAY, 1);
-
-    /* where to store */
-    my_setopt(curl, CURLOPT_WRITEDATA, &outs);
-    /* what call to write */
-    my_setopt(curl, CURLOPT_WRITEFUNCTION, tool_write_cb);
-
-
-    /* for uploads */
-    input.fd = infd;
-    input.config = config;
-    /* Note that if CURLOPT_READFUNCTION is fread (the default), then
-     * lib/telnet.c will Curl_poll() on the input file descriptor
-     * rather then calling the READFUNCTION at regular intervals.
-     * The circumstances in which it is preferable to enable this
-     * behaviour, by omitting to set the READFUNCTION & READDATA options,
-     * have not been determined.
-     */
-    my_setopt(curl, CURLOPT_READDATA, &input);
-    /* what call to read */
-    my_setopt(curl, CURLOPT_READFUNCTION, tool_read_cb);
-
-    /* in 7.18.0, the CURLOPT_SEEKFUNCTION/DATA pair is taking over what
-       CURLOPT_IOCTLFUNCTION/DATA pair previously provided for seeking */
-    my_setopt(curl, CURLOPT_SEEKDATA, &input);
-    my_setopt(curl, CURLOPT_SEEKFUNCTION, tool_seek_cb);
-
-    if(config->recvpersecond)
-      /* tell libcurl to use a smaller sized buffer as it allows us to
-         make better sleeps! 7.9.9 stuff! */
-      my_setopt(curl, CURLOPT_BUFFERSIZE, config->recvpersecond);
-
-    /* size of uploaded file: */
-    if(uploadfilesize != -1)
-      my_setopt(curl, CURLOPT_INFILESIZE_LARGE, uploadfilesize);
-    my_setopt(curl, CURLOPT_URL, (*mlres)->url);     /* what to fetch */
-    my_setopt(curl, CURLOPT_NOPROGRESS, config->noprogress);
-    if(config->no_body) {
-      my_setopt(curl, CURLOPT_NOBODY, 1);
-      my_setopt(curl, CURLOPT_HEADER, 1);
-    }
-    else
-      my_setopt(curl, CURLOPT_HEADER, config->include_headers);
-
-#if !defined(CURL_DISABLE_PROXY)
-    {
-      /* TODO: Make this a run-time check instead of compile-time one. */
-
-      my_setopt_str(curl, CURLOPT_PROXY, config->proxy);
-      my_setopt_str(curl, CURLOPT_PROXYUSERPWD, config->proxyuserpwd);
-
-      /* new in libcurl 7.3 */
-      my_setopt(curl, CURLOPT_HTTPPROXYTUNNEL, config->proxytunnel);
-
-      /* new in libcurl 7.5 */
-      if(config->proxy)
-        my_setopt_enum(curl, CURLOPT_PROXYTYPE, config->proxyver);
-
-      /* new in libcurl 7.10 */
-      if(config->socksproxy) {
-        my_setopt_str(curl, CURLOPT_PROXY, config->socksproxy);
-        my_setopt_enum(curl, CURLOPT_PROXYTYPE, config->socksver);
-      }
-
-      /* new in libcurl 7.10.6 */
-      if(config->proxyanyauth)
-        my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
-                          (long) CURLAUTH_ANY);
-      else if(config->proxynegotiate)
-        my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
-                          (long) CURLAUTH_GSSNEGOTIATE);
-      else if(config->proxyntlm)
-        my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
-                          (long) CURLAUTH_NTLM);
-      else if(config->proxydigest)
-        my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
-                          (long) CURLAUTH_DIGEST);
-      else if(config->proxybasic)
-        my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
-                          (long) CURLAUTH_BASIC);
-
-      /* new in libcurl 7.19.4 */
-      my_setopt(curl, CURLOPT_NOPROXY, config->noproxy);
-    }
-#endif
-
-    my_setopt(curl, CURLOPT_FAILONERROR, config->failonerror);
-    my_setopt(curl, CURLOPT_UPLOAD, uploadfile?TRUE:FALSE);
-    my_setopt(curl, CURLOPT_DIRLISTONLY, config->dirlistonly);
-    my_setopt(curl, CURLOPT_APPEND, config->ftp_append);
-
-    if(config->netrc_opt)
-      my_setopt(curl, CURLOPT_NETRC, CURL_NETRC_OPTIONAL);
-    else if(config->netrc || config->netrc_file)
-      my_setopt(curl, CURLOPT_NETRC, CURL_NETRC_REQUIRED);
-    else
-      my_setopt(curl, CURLOPT_NETRC, CURL_NETRC_IGNORED);
-
-    if(config->netrc_file)
-      my_setopt(curl, CURLOPT_NETRC_FILE, config->netrc_file);
-
-    my_setopt(curl, CURLOPT_TRANSFERTEXT, config->use_ascii);
-    my_setopt_str(curl, CURLOPT_USERPWD, config->userpwd);
-    my_setopt_str(curl, CURLOPT_RANGE, config->range);
-    my_setopt(curl, CURLOPT_ERRORBUFFER, errorbuffer);
-    my_setopt(curl, CURLOPT_TIMEOUT, config->timeout);
-
-    if(built_in_protos & CURLPROTO_HTTP) {
-
-      long postRedir = 0;
-
-      my_setopt(curl, CURLOPT_FOLLOWLOCATION,
-                config->followlocation);
-      my_setopt(curl, CURLOPT_UNRESTRICTED_AUTH,
-                config->unrestricted_auth);
-
-      switch(config->httpreq) {
-      case HTTPREQ_SIMPLEPOST:
-        my_setopt_str(curl, CURLOPT_POSTFIELDS,
-                      config->postfields);
-        my_setopt(curl, CURLOPT_POSTFIELDSIZE_LARGE,
-                  config->postfieldsize);
-        break;
-      case HTTPREQ_POST:
-        my_setopt_httppost(curl, CURLOPT_HTTPPOST, config->httppost);
-        break;
-      default:
-        break;
-      }
-
-      my_setopt_str(curl, CURLOPT_REFERER, config->referer);
-      my_setopt(curl, CURLOPT_AUTOREFERER, config->autoreferer);
-      my_setopt_str(curl, CURLOPT_USERAGENT, config->useragent);
-      my_setopt_slist(curl, CURLOPT_HTTPHEADER, config->headers);
-
-      /* new in libcurl 7.5 */
-      my_setopt(curl, CURLOPT_MAXREDIRS, config->maxredirs);
-
-      /* new in libcurl 7.9.1 */
-      if(config->httpversion)
-        my_setopt_enum(curl, CURLOPT_HTTP_VERSION, config->httpversion);
-
-      /* new in libcurl 7.10.6 (default is Basic) */
-      if(config->authtype)
-        my_setopt_bitmask(curl, CURLOPT_HTTPAUTH, (long) config->authtype);
-
-      /* curl 7.19.1 (the 301 version existed in 7.18.2),
-         303 was added in 7.26.0 */
-      if(config->post301)
-        postRedir |= CURL_REDIR_POST_301;
-      if(config->post302)
-        postRedir |= CURL_REDIR_POST_302;
-      if(config->post303)
-        postRedir |= CURL_REDIR_POST_303;
-      my_setopt(curl, CURLOPT_POSTREDIR, postRedir);
-
-      /* new in libcurl 7.21.6 */
-      if(config->encoding)
-        my_setopt_str(curl, CURLOPT_ACCEPT_ENCODING, "");
-
-      /* new in libcurl 7.21.6 */
-      if(config->tr_encoding)
-        my_setopt(curl, CURLOPT_TRANSFER_ENCODING, 1);
-
-    } /* (built_in_protos & CURLPROTO_HTTP) */
-
-    my_setopt_str(curl, CURLOPT_FTPPORT, config->ftpport);
-    my_setopt(curl, CURLOPT_LOW_SPEED_LIMIT,
-              config->low_speed_limit);
-    my_setopt(curl, CURLOPT_LOW_SPEED_TIME, config->low_speed_time);
-    my_setopt(curl, CURLOPT_MAX_SEND_SPEED_LARGE,
-              config->sendpersecond);
-    my_setopt(curl, CURLOPT_MAX_RECV_SPEED_LARGE,
-              config->recvpersecond);
-    my_setopt(curl, CURLOPT_RESUME_FROM_LARGE,
-              config->use_resume?config->resume_from:0);
-
-    my_setopt(curl, CURLOPT_SSLCERT, config->cert);
-    my_setopt_str(curl, CURLOPT_SSLCERTTYPE, config->cert_type);
-    my_setopt(curl, CURLOPT_SSLKEY, config->key);
-    my_setopt_str(curl, CURLOPT_SSLKEYTYPE, config->key_type);
-    my_setopt_str(curl, CURLOPT_KEYPASSWD, config->key_passwd);
-
-    if(built_in_protos & (CURLPROTO_SCP|CURLPROTO_SFTP)) {
-
-      /* SSH and SSL private key uses same command-line option */
-      /* new in libcurl 7.16.1 */
-      my_setopt_str(curl, CURLOPT_SSH_PRIVATE_KEYFILE, config->key);
-      /* new in libcurl 7.16.1 */
-      my_setopt_str(curl, CURLOPT_SSH_PUBLIC_KEYFILE, config->pubkey);
-
-      /* new in libcurl 7.17.1: SSH host key md5 checking allows us
-         to fail if we are not talking to who we think we should */
-      my_setopt_str(curl, CURLOPT_SSH_HOST_PUBLIC_KEY_MD5,
-                    config->hostpubmd5);
-    }
-
-    if(config->cacert)
-      my_setopt_str(curl, CURLOPT_CAINFO, config->cacert);
-    if(config->capath)
-      my_setopt_str(curl, CURLOPT_CAPATH, config->capath);
-    if(config->crlfile)
-      my_setopt_str(curl, CURLOPT_CRLFILE, config->crlfile);
-
-    if(curlinfo->features & CURL_VERSION_SSL) {
-      if(config->insecure_ok) {
-        my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
-        my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 1L);
-      }
-      else {
-        my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
-        /* libcurl default is strict verifyhost -> 2L   */
-        /* my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 2L); */
-      }
-    }
-
-    if(built_in_protos & (CURLPROTO_SCP|CURLPROTO_SFTP)) {
-      if(!config->insecure_ok) {
-        char *home;
-        char *file;
-        res = CURLE_OUT_OF_MEMORY;
-        home = homedir();
-        if(home) {
-          file = aprintf("%s/%sssh/known_hosts", home, DOT_CHAR);
-          if(file) {
-            /* new in curl 7.19.6 */
-            res = res_setopt_str(curl, CURLOPT_SSH_KNOWNHOSTS, file);
-            curl_free(file);
-            if(res == CURLE_UNKNOWN_OPTION)
-              /* libssh2 version older than 1.1.1 */
-              res = CURLE_OK;
-          }
-          Curl_safefree(home);
-        }
-        if(res)
-          goto show_error;
-      }
-    }
-
-    if(config->no_body || config->remote_time) {
-      /* no body or use remote time */
-      my_setopt(curl, CURLOPT_FILETIME, TRUE);
-    }
-
-    my_setopt(curl, CURLOPT_CRLF, config->crlf);
-    my_setopt_slist(curl, CURLOPT_QUOTE, config->quote);
-    my_setopt_slist(curl, CURLOPT_POSTQUOTE, config->postquote);
-    my_setopt_slist(curl, CURLOPT_PREQUOTE, config->prequote);
-
-#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES)
-    {
-      /* TODO: Make this a run-time check instead of compile-time one. */
-
-      if(config->cookie)
-        my_setopt_str(curl, CURLOPT_COOKIE, config->cookie);
-
-      if(config->cookiefile)
-        my_setopt_str(curl, CURLOPT_COOKIEFILE, config->cookiefile);
-
-      /* new in libcurl 7.9 */
-      if(config->cookiejar)
-        my_setopt_str(curl, CURLOPT_COOKIEJAR, config->cookiejar);
-
-      /* new in libcurl 7.9.7 */
-      my_setopt(curl, CURLOPT_COOKIESESSION, config->cookiesession);
-    }
-#endif
-
-    my_setopt_enum(curl, CURLOPT_SSLVERSION, config->ssl_version);
-    my_setopt_enum(curl, CURLOPT_TIMECONDITION, config->timecond);
-    my_setopt(curl, CURLOPT_TIMEVALUE, config->condtime);
-    my_setopt_str(curl, CURLOPT_CUSTOMREQUEST, config->customrequest);
-    my_setopt(curl, CURLOPT_STDERR, config->errors);
-
-    /* three new ones in libcurl 7.3: */
-    my_setopt_str(curl, CURLOPT_INTERFACE, config->iface);
-    my_setopt_str(curl, CURLOPT_KRBLEVEL, config->krblevel);
-
-    progressbarinit(&progressbar, config);
-    if((config->progressmode == CURL_PROGRESS_BAR) &&
-       !config->noprogress && !config->mute) {
-      /* we want the alternative style, then we have to implement it
-         ourselves! */
-      my_setopt(curl, CURLOPT_PROGRESSFUNCTION, tool_progress_cb);
-      my_setopt(curl, CURLOPT_PROGRESSDATA, &progressbar);
-    }
-
-    /* new in libcurl 7.6.2: */
-    my_setopt_slist(curl, CURLOPT_TELNETOPTIONS, config->telnet_options);
-
-    /* new in libcurl 7.7: */
-    my_setopt_str(curl, CURLOPT_RANDOM_FILE, config->random_file);
-    my_setopt(curl, CURLOPT_EGDSOCKET, config->egd_file);
-    my_setopt(curl, CURLOPT_CONNECTTIMEOUT, config->connecttimeout);
-
-    if(config->cipher_list)
-      my_setopt_str(curl, CURLOPT_SSL_CIPHER_LIST, config->cipher_list);
-
-    /* new in libcurl 7.9.2: */
-    if(config->disable_epsv)
-      /* disable it */
-      my_setopt(curl, CURLOPT_FTP_USE_EPSV, FALSE);
-
-    /* new in libcurl 7.10.5 */
-    if(config->disable_eprt)
-      /* disable it */
-      my_setopt(curl, CURLOPT_FTP_USE_EPRT, FALSE);
-
-    if(config->tracetype != TRACE_NONE) {
-      my_setopt(curl, CURLOPT_DEBUGFUNCTION, tool_debug_cb);
-      my_setopt(curl, CURLOPT_DEBUGDATA, config);
-      my_setopt(curl, CURLOPT_VERBOSE, TRUE);
-    }
-
-    /* new in curl 7.9.3 */
-    if(config->engine) {
-      res = res_setopt_str(curl, CURLOPT_SSLENGINE, config->engine);
-      if(res)
-        goto show_error;
-      my_setopt(curl, CURLOPT_SSLENGINE_DEFAULT, 1);
-    }
-
-    /* new in curl 7.10.7, extended in 7.19.4 but this only sets 0 or 1 */
-    my_setopt(curl, CURLOPT_FTP_CREATE_MISSING_DIRS,
-              config->ftp_create_dirs);
-
-    /* new in curl 7.10.8 */
-    if(config->max_filesize)
-      my_setopt(curl, CURLOPT_MAXFILESIZE_LARGE,
-                config->max_filesize);
-
-    if(4 == config->ip_version)
-      my_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4);
-    else if(6 == config->ip_version)
-      my_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6);
-    else
-      my_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER);
-
-    /* new in curl 7.15.5 */
-    if(config->ftp_ssl_reqd)
-      my_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_ALL);
-
-    /* new in curl 7.11.0 */
-    else if(config->ftp_ssl)
-      my_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_TRY);
-
-    /* new in curl 7.16.0 */
-    else if(config->ftp_ssl_control)
-      my_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_CONTROL);
-
-    /* new in curl 7.16.1 */
-    if(config->ftp_ssl_ccc)
-      my_setopt_enum(curl, CURLOPT_FTP_SSL_CCC, config->ftp_ssl_ccc_mode);
-
-#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI)
-    {
-      /* TODO: Make this a run-time check instead of compile-time one. */
-
-      /* new in curl 7.19.4 */
-      if(config->socks5_gssapi_service)
-        my_setopt_str(curl, CURLOPT_SOCKS5_GSSAPI_SERVICE,
-                      config->socks5_gssapi_service);
-
-      /* new in curl 7.19.4 */
-      if(config->socks5_gssapi_nec)
-        my_setopt_str(curl, CURLOPT_SOCKS5_GSSAPI_NEC,
-                      config->socks5_gssapi_nec);
-    }
-#endif
-    /* curl 7.13.0 */
-    my_setopt_str(curl, CURLOPT_FTP_ACCOUNT, config->ftp_account);
-
-    my_setopt(curl, CURLOPT_IGNORE_CONTENT_LENGTH, config->ignorecl);
-
-    /* curl 7.14.2 */
-    my_setopt(curl, CURLOPT_FTP_SKIP_PASV_IP, config->ftp_skip_ip);
-
-    /* curl 7.15.1 */
-    my_setopt(curl, CURLOPT_FTP_FILEMETHOD, config->ftp_filemethod);
-
-    /* curl 7.15.2 */
-    if(config->localport) {
-      my_setopt(curl, CURLOPT_LOCALPORT, config->localport);
-      my_setopt_str(curl, CURLOPT_LOCALPORTRANGE,
-                    config->localportrange);
-    }
-
-    /* curl 7.15.5 */
-    my_setopt_str(curl, CURLOPT_FTP_ALTERNATIVE_TO_USER,
-                  config->ftp_alternative_to_user);
-
-    /* curl 7.16.0 */
-    if(config->disable_sessionid)
-      my_setopt(curl, CURLOPT_SSL_SESSIONID_CACHE,
-                !config->disable_sessionid);
-
-    /* curl 7.16.2 */
-    if(config->raw) {
-      my_setopt(curl, CURLOPT_HTTP_CONTENT_DECODING, FALSE);
-      my_setopt(curl, CURLOPT_HTTP_TRANSFER_DECODING, FALSE);
-    }
-
-    /* curl 7.17.1 */
-    if(!config->nokeepalive) {
-      my_setopt(curl, CURLOPT_TCP_KEEPALIVE, 1L);
-      if(config->alivetime != 0) {
-#if !defined(TCP_KEEPIDLE) || !defined(TCP_KEEPINTVL)
-        warnf(config, "Keep-alive functionality somewhat crippled due to "
-              "missing support in your operating system!\n");
-#endif
-        my_setopt(curl, CURLOPT_TCP_KEEPIDLE, config->alivetime);
-        my_setopt(curl, CURLOPT_TCP_KEEPINTVL, config->alivetime);
-      }
-    }
-    else
-      my_setopt(curl, CURLOPT_TCP_KEEPALIVE, 0L);
-
-    /* curl 7.20.0 */
-    if(config->tftp_blksize)
-      my_setopt(curl, CURLOPT_TFTP_BLKSIZE, config->tftp_blksize);
-
-    if(config->mail_from)
-      my_setopt_str(curl, CURLOPT_MAIL_FROM, config->mail_from);
-
-    if(config->mail_rcpt)
-      my_setopt_slist(curl, CURLOPT_MAIL_RCPT, config->mail_rcpt);
-
-    /* curl 7.20.x */
-    if(config->ftp_pret)
-      my_setopt(curl, CURLOPT_FTP_USE_PRET, TRUE);
-
-    if(config->proto_present)
-      my_setopt_flags(curl, CURLOPT_PROTOCOLS, config->proto);
-    if(config->proto_redir_present)
-      my_setopt_flags(curl, CURLOPT_REDIR_PROTOCOLS, config->proto_redir);
-
-    if((urlnode->flags & GETOUT_USEREMOTE)
-       && config->content_disposition) {
-      my_setopt(curl, CURLOPT_HEADERFUNCTION, tool_header_cb);
-      my_setopt(curl, CURLOPT_HEADERDATA, &outs);
-    }
-    else {
-      /* if HEADERFUNCTION was set to something in the previous loop, it
-         is important that we set it (back) to NULL now */
-      my_setopt(curl, CURLOPT_HEADERFUNCTION, NULL);
-      my_setopt(curl, CURLOPT_HEADERDATA, config->headerfile?&heads:NULL);
-    }
-
-    if(config->resolve)
-      /* new in 7.21.3 */
-      my_setopt_slist(curl, CURLOPT_RESOLVE, config->resolve);
-
-    /* new in 7.21.4 */
-    if(curlinfo->features & CURL_VERSION_TLSAUTH_SRP) {
-      if(config->tls_username)
-        my_setopt_str(curl, CURLOPT_TLSAUTH_USERNAME,
-                      config->tls_username);
-      if(config->tls_password)
-        my_setopt_str(curl, CURLOPT_TLSAUTH_PASSWORD,
-                      config->tls_password);
-      if(config->tls_authtype)
-        my_setopt_str(curl, CURLOPT_TLSAUTH_TYPE,
-                      config->tls_authtype);
-    }
-
-    /* new in 7.22.0 */
-    if(config->gssapi_delegation)
-      my_setopt_str(curl, CURLOPT_GSSAPI_DELEGATION,
-                    config->gssapi_delegation);
-
-    /* new in 7.25.0 */
-    if(config->ssl_allow_beast)
-      my_setopt(curl, CURLOPT_SSL_OPTIONS, (long)CURLSSLOPT_ALLOW_BEAST);
-
-    if(config->mail_auth)
-      my_setopt_str(curl, CURLOPT_MAIL_AUTH, config->mail_auth);
-
-    /* initialize retry vars for loop below */
-    retry_sleep_default = (config->retry_delay) ?
-      config->retry_delay*1000L : RETRY_SLEEP_DEFAULT; /* ms */
-
-    retry_numretries = config->req_retry;
-    retry_sleep = retry_sleep_default; /* ms */
-    retrystart = tvnow();
-
-#ifndef CURL_DISABLE_LIBCURL_OPTION
-    res = easysrc_perform();
-    if(res) {
-      goto show_error;
-    }
-#endif
-
-    for(;;) {
-      res = curl_easy_perform(curl);
-      /* if retry-max-time is non-zero, make sure we haven't exceeded the
-         time */
-      if(retry_numretries &&
-         (!config->retry_maxtime ||
-          (tvdiff(tvnow(), retrystart) < config->retry_maxtime*1000)) ) {
-        enum {
-          RETRY_NO,
-          RETRY_TIMEOUT,
-          RETRY_HTTP,
-          RETRY_FTP,
-          RETRY_LAST /* not used */
-        } retry = RETRY_NO;
-        long response;
-        if(CURLE_OPERATION_TIMEDOUT == res)
-          /* retry timeout always */
-          retry = RETRY_TIMEOUT;
-        else if(CURLE_OK == res) {
-          /* Check for HTTP transient errors */
-          char *this_url=NULL;
-          curl_easy_getinfo(curl, CURLINFO_EFFECTIVE_URL, &this_url);
-          if(this_url &&
-             curlx_strnequal(this_url, "http", 4)) {
-            /* This was HTTP(S) */
-            curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response);
-
-            switch(response) {
-            case 500: /* Internal Server Error */
-            case 502: /* Bad Gateway */
-            case 503: /* Service Unavailable */
-            case 504: /* Gateway Timeout */
-              retry = RETRY_HTTP;
-              /*
-               * At this point, we have already written data to the output
-               * file (or terminal). If we write to a file, we must rewind
-               * or close/re-open the file so that the next attempt starts
-               * over from the beginning.
-               *
-               * TODO: similar action for the upload case. We might need
-               * to start over reading from a previous point if we have
-               * uploaded something when this was returned.
-               */
-              break;
-            }
-          }
-        } /* if CURLE_OK */
-        else if(CURLE_LOGIN_DENIED == res) {
-          curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response);
-
-          if(response/100 == 4)
-            /*
-             * This is typically when the FTP server only allows a certain
-             * amount of users and we are not one of them.  All 4xx codes
-             * are transient.
-             */
-            retry = RETRY_FTP;
-        }
-
-        if(retry) {
-          static const char * const m[]={NULL,
-                                         "timeout",
-                                         "HTTP error",
-                                         "FTP error"
-          };
-          warnf(config, "Transient problem: %s "
-                "Will retry in %ld seconds. "
-                "%ld retries left.\n",
-                m[retry],
-                retry_sleep/1000,
-                retry_numretries);
-
-          tool_go_sleep(retry_sleep);
-          retry_numretries--;
-          if(!config->retry_delay) {
-            retry_sleep *= 2;
-            if(retry_sleep > RETRY_SLEEP_MAX)
-              retry_sleep = RETRY_SLEEP_MAX;
-          }
-          curl_truncate_file(config, outs);
-          continue;
-        }
-      } /* if retry_numretries */
-      else {
-        /* Metalink: Decide to try the next resource or
-           not. Basically, we want to try the next resource if
-           download was not successful. */
-        long response;
-        if(CURLE_OPERATION_TIMEDOUT == res) {
-          try_next_res = 1;
-        }
-        else if(CURLE_OK == res) {
-          char *this_url=NULL;
-          curl_easy_getinfo(curl, CURLINFO_EFFECTIVE_URL, &this_url);
-          if(this_url &&
-             curlx_strnequal(this_url, "http", 4)) {
-            /* This was HTTP(S) */
-            curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response);
-
-            switch(response) {
-            case 400:
-            case 401:
-            case 402:
-            case 403:
-            case 404:
-            case 405:
-            case 406:
-            case 407:
-            case 408:
-            case 409:
-            case 410:
-            case 411:
-            case 412:
-            case 413:
-            case 414:
-            case 415:
-            case 416:
-            case 417:
-              try_next_res = 1;
-              break;
-            }
-          }
-        }
-        else if(CURLE_LOGIN_DENIED == res) {
-          if(response/100 == 5)
-            /*
-             * For permanent negative return code, try the next resource.
-             */
-            try_next_res = 1;
-        }
-      }
-
-      /* In all ordinary cases, just break out of loop here */
-      retry_sleep = retry_sleep_default;
-      break;
-
-    }
-    if(try_next_res == 1) {
-      if(mlres+1) {
-        warnf(config, "The remote server returned negative response. "
-              "Will try to the next resource.");
-      }
-      curl_truncate_file(config, outs);
-    }
-    else
-      break;
-  }
-  if((config->progressmode == CURL_PROGRESS_BAR) &&
-     progressbar.calls) {
-    /* if the custom progress bar has been displayed, we output a
-       newline here */
-    fputs("\n", progressbar.out);
-  }
-
-  if(config->writeout) {
-    ourWriteOut(curl, &outs, config->writeout);
-  }
-#ifdef USE_ENVIRONMENT
-  if(config->writeenv)
-    ourWriteEnv(curl);
-#endif
-
-show_error:
-
-#ifdef  VMS
-  if(!config->showerror)  {
-    vms_show = VMSSTS_HIDE;
-  }
-#else
-  if((res!=CURLE_OK) && config->showerror) {
-    fprintf(config->errors, "curl: (%d) %s\n", res,
-            errorbuffer[0]? errorbuffer:
-            curl_easy_strerror((CURLcode)res));
-    if(CURLE_SSL_CACERT == res) {
-#define CURL_CA_CERT_ERRORMSG1                                  \
-"More details here: http://curl.haxx.se/docs/sslcerts.html\n\n" \
-"curl performs SSL certificate verification by default, using a \"bundle\"\n" \
-" of Certificate Authority (CA) public keys (CA certs). If the default\n" \
-" bundle file isn't adequate, you can specify an alternate file\n" \
-" using the --cacert option.\n"
-
-#define CURL_CA_CERT_ERRORMSG2 \
-"If this HTTPS server uses a certificate signed by a CA represented in\n" \
-" the bundle, the certificate verification probably failed due to a\n" \
-" problem with the certificate (it might be expired, or the name might\n" \
-" not match the domain name in the URL).\n" \
-"If you'd like to turn off curl's verification of the certificate, use\n" \
-" the -k (or --insecure) option.\n"
-
-      fprintf(config->errors, "%s%s",
-              CURL_CA_CERT_ERRORMSG1,
-              CURL_CA_CERT_ERRORMSG2 );
-    }
-  }
-#endif
-
-  if(outfile && !curlx_strequal(outfile, "-") && outs.stream)
-    fclose(outs.stream);
-
-#ifdef HAVE_UTIME
-  /* Important that we set the time _after_ the file has been
-     closed, as is done above here */
-  if(config->remote_time && outs.filename) {
-    /* ask libcurl if we got a time. Pretty please */
-    long filetime;
-    curl_easy_getinfo(curl, CURLINFO_FILETIME, &filetime);
-    if(filetime >= 0) {
-      struct utimbuf times;
-      times.actime = (time_t)filetime;
-      times.modtime = (time_t)filetime;
-      utime(outs.filename, &times); /* set the time we got */
-    }
-  }
-#endif
-#ifdef __AMIGA__
-  /* Set the url as comment for the file. (up to 80 chars are allowed)
-   */
-  if(strlen(url) > 78)
-    url[79] = '\0';
-
-  SetComment( outs.filename, url);
-#endif
-
-  if(filename)
-    free(filename);
-  if(outfile)
-    free(outfile);
-
-  if(infdopen)
-    close(infd);
-  if(outfiles)
-    free(outfiles);
-
-  return 0;
+  for(mlres = mlfile->file->resources; *mlres; ++mlres, ++count);
+  return count;
 }
 
 void clean_metalink(struct Configurable *config)
@@ -977,14 +53,14 @@ void clean_metalink(struct Configurable *config)
   while(config->metalinkfile_list) {
     struct metalinkfile *mlfile = config->metalinkfile_list;
     config->metalinkfile_list = config->metalinkfile_list->next;
-    free(mlfile);
+    Curl_safefree(mlfile);
   }
   config->metalinkfile_last = 0;
   while(config->metalink_list) {
     struct metalink *ml = config->metalink_list;
     config->metalink_list = config->metalink_list->next;
     metalink_delete(ml->metalink);
-    free(ml);
+    Curl_safefree(ml);
   }
   config->metalink_last = 0;
 }