curl.1: generated with gen.pl

This is the first time we replace the manually edited curt.1 with the
generated one created by gen.pl and the individual option documentation
pages.

Do not edit this file, edit the individual pages and regenerate this
output.

This file will be generated by the build system soon and then removed
from git.

1 files changed, 1444 insertions, 1301 deletions

diff --git a/docs/curl.1 b/docs/curl.1
index 97166fc77..efa3a7e56 100644
--- a/docs/curl.1
+++ b/docs/curl.1
@@ -20,7 +20,9 @@
 .\" *
 .\" **************************************************************************
 .\"
-.TH curl 1 "30 Nov 2014" "Curl 7.40.0" "Curl Manual"
+.\" DO NOT EDIT. Generated by the curl project gen.pl man page generator.
+.\"
+.TH curl 1 "16 Dec 2016" "Curl 7.52.0" "Curl Manual"
 .SH NAME
 curl \- transfer a URL
 .SH SYNOPSIS
@@ -115,15 +117,15 @@ similar.
 It is not the same case for FTP upload as that operation does not spit out
 any response data to the terminal.
 
-If you prefer a progress "bar" instead of the regular meter, \fI-#\fP is your
-friend.
+If you prefer a progress "bar" instead of the regular meter, \fI-#, --progress-bar\fP is
+your friend.
 .SH OPTIONS
 Options start with one or two dashes. Many of the options require an
 additional value next to them.
 
 The short "single-dash" form of the options, -d for example, may be used with
 or without a space between it and its value, although a space is a recommended
-separator. The long "double-dash" form, --data for example, requires a space
+separator. The long "double-dash" form, \fI-d, --data\fP for example, requires a space
 between it and its value.
 
 Short version options that don't need any additional values can be used
@@ -136,256 +138,310 @@ but prefix it with "no-". However, in this list we mostly only list and show
 the --option version of them. (This concept with --no options was added in
 7.19.0. Previously most options were toggled on/off on repeated use of the
 same command line option.)
-.IP "-#, --progress-bar"
-Make curl display progress as a simple progress bar instead of the standard,
-more informational, meter.
-.IP "-:, --next"
-Tells curl to use a separate operation for the following URL and associated
-options. This allows you to send several URL requests, each with their own
-specific options, for example, such as different user names or custom requests
-for each. (Added in 7.36.0)
-.IP "-0, --http1.0"
-(HTTP) Tells curl to use HTTP version 1.0 instead of using its internally
-preferred: HTTP 1.1.
-.IP "--http1.1"
-(HTTP) Tells curl to use HTTP version 1.1. This is the internal default
-version. (Added in 7.33.0)
-.IP "--http2"
-(HTTP) Tells curl to issue its requests using HTTP 2. This requires that the
-underlying libcurl was built to support it. (Added in 7.33.0)
-.IP "--http2-prior-knowledge"
-(HTTP) Tells curl to issue its non-TLS HTTP requests using HTTP/2 without
-HTTP/1.1 Upgrade. It requires prior knowledge that the server supports HTTP/2
-straight away. HTTPS requests will still do HTTP/2 the standard way with
-negotiated protocol version in the TLS handshake.
+.IP "--anyauth"
+(HTTP) Tells curl to figure out authentication method by itself, and use the most
+secure one the remote site claims to support. This is done by first doing a
+request and checking the response-headers, thus possibly inducing an extra
+network round-trip. This is used instead of setting a specific authentication
+method, which you can do with \fI--basic\fP, \fI--digest\fP, \fI--ntlm\fP, and \fI--negotiate\fP.
 
-HTTP/2 support in general also requires that the underlying libcurl was built
-to support it. (Added in 7.49.0)
-.IP "--no-npn"
-Disable the NPN TLS extension. NPN is enabled by default if libcurl was built
-with an SSL library that supports NPN. NPN is used by a libcurl that supports
-HTTP 2 to negotiate HTTP 2 support with the server during https sessions.
+Using \fI--anyauth\fP is not recommended if you do uploads from stdin, since it may
+require data to be sent twice and then the client must be able to rewind. If
+the need should arise when uploading from stdin, the upload operation will
+fail.
 
-(Added in 7.36.0)
-.IP "--no-alpn"
-Disable the ALPN TLS extension. ALPN is enabled by default if libcurl was built
-with an SSL library that supports ALPN. ALPN is used by a libcurl that supports
-HTTP 2 to negotiate HTTP 2 support with the server during https sessions.
+Used together with \fI-u, --user\fP.
 
-(Added in 7.36.0)
-.IP "-1, --tlsv1"
-(SSL)
-Forces curl to use TLS version 1.x when negotiating with a remote TLS server.
-You can use options \fI--tlsv1.0\fP, \fI--tlsv1.1\fP, \fI--tlsv1.2\fP, and
-\fI--tlsv1.3\fP to control the TLS version more precisely (if the SSL backend
-in use supports such a level of control).
-.IP "-2, --sslv2"
-(SSL) Forces curl to use SSL version 2 when negotiating with a remote SSL
-server. Sometimes curl is built without SSLv2 support. SSLv2 is widely
-considered insecure (see RFC 6176).
-.IP "-3, --sslv3"
-(SSL) Forces curl to use SSL version 3 when negotiating with a remote SSL
-server. Sometimes curl is built without SSLv3 support. SSLv3 is widely
-considered insecure (see RFC 7568).
-.IP "-4, --ipv4"
-This option tells curl to resolve names to IPv4 addresses only, and not for
-example try IPv6.
-.IP "-6, --ipv6"
-This option tells curl to resolve names to IPv6 addresses only, and not for
-example try IPv4.
+See also \fI--proxy-anyauth\fP and \fI--basic\fP and \fI--digest\fP. 
 .IP "-a, --append"
-(FTP/SFTP) When used in an upload, this makes curl append to the target file
-instead of overwriting it. If the remote file doesn't exist, it will be
-created.  Note that this flag is ignored by some SFTP servers (including
-OpenSSH).
-.IP "-A, --user-agent <agent string>"
-(HTTP) Specify the User-Agent string to send to the HTTP server. Some badly
-done CGIs fail if this field isn't set to "Mozilla/4.0". To encode blanks in
-the string, surround the string with single quote marks. This can also be set
-with the \fI-H, --header\fP option of course.
+(FTP SFTP) When used in an upload, this makes curl append to the target file instead of
+overwriting it. If the remote file doesn't exist, it will be created.  Note
+that this flag is ignored by some SFTP servers (including OpenSSH).
+.IP "--basic"
+(HTTP) Tells curl to use HTTP Basic authentication with the remote host. This is the
+default and this option is usually pointless, unless you use it to override a
+previously set option that sets a different authentication method (such as
+\fI--ntlm\fP, \fI--digest\fP, or \fI--negotiate\fP).
 
-If this option is used several times, the last one will be used.
-.IP "--anyauth"
-(HTTP) Tells curl to figure out authentication method by itself, and use the
-most secure one the remote site claims to support. This is done by first
-doing a request and checking the response-headers, thus possibly inducing an
-extra network round-trip. This is used instead of setting a specific
-authentication method, which you can do with \fI--basic\fP, \fI--digest\fP,
-\fI--ntlm\fP, and \fI--negotiate\fP.
-
-Note that using --anyauth is not recommended if you do uploads from stdin,
-since it may require data to be sent twice and then the client must be able to
-rewind. If the need should arise when uploading from stdin, the upload
-operation will fail.
-.IP "-b, --cookie <name=data>"
-(HTTP) Pass the data to the HTTP server as a cookie. It is supposedly the data
-previously received from the server in a "Set-Cookie:" line.  The data should
-be in the format "NAME1=VALUE1; NAME2=VALUE2".
-
-If no '=' symbol is used in the line, it is treated as a filename to use to
-read previously stored cookie lines from, which should be used in this session
-if they match. Using this method also activates the cookie engine which will
-make curl record incoming cookies too, which may be handy if you're using this
-in combination with the \fI-L, --location\fP option. The file format of the
-file to read cookies from should be plain HTTP headers (Set-Cookie style) or
-the Netscape/Mozilla cookie file format.
-
-The file specified with \fI-b, --cookie\fP is only used as input. No cookies
-will be written to the file. To store cookies, use the \fI-c, --cookie-jar\fP
-option.
+Used together with \fI-u, --user\fP.
+
+See also \fI--proxy-basic\fP. 
+.IP "--cacert <CA certificate>"
+(TLS) Tells curl to use the specified certificate file to verify the peer. The file
+may contain multiple CA certificates. The certificate(s) must be in PEM
+format. Normally curl is built to use a default file for this, so this option
+is typically used to alter that default file.
+
+curl recognizes the environment variable named 'CURL_CA_BUNDLE' if it is
+set, and uses the given path as a path to a CA cert bundle. This option
+overrides that variable.
+
+The windows version of curl will automatically look for a CA certs file named
+\'curl-ca-bundle.crt\', either in the same directory as curl.exe, or in the
+Current Working Directory, or in any folder along your PATH.
+
+If curl is built against the NSS SSL library, the NSS PEM PKCS#11 module
+(libnsspem.so) needs to be available for this option to work properly.
 
-Exercise caution if you are using this option and multiple transfers may occur.
-If you use the NAME1=VALUE1; format, or in a file use the Set-Cookie format and
-don't specify a domain, then the cookie is sent for any domain (even after
-redirects are followed) and cannot be modified by a server-set cookie. If the
-cookie engine is enabled and a server sets a cookie of the same name then both
-will be sent on a future transfer to that server, likely not what you intended.
-To address these issues set a domain in Set-Cookie (doing that will include
-sub-domains) or use the Netscape format.
+(iOS and macOS only) If curl is built against Secure Transport, then this
+option is supported for backward compatibility with other SSL engines, but it
+should not be set. If the option is not set, then curl will use the
+certificates in the system and user Keychain to verify the peer, which is the
+preferred method of verifying the peer's certificate chain.
 
 If this option is used several times, the last one will be used.
-.IP "-B, --use-ascii"
-(FTP/LDAP) Enable ASCII transfer. For FTP, this can also be enforced by using
-an URL that ends with ";type=A". This option causes data sent to stdout to be
-in text mode for win32 systems.
-.IP "--basic"
-(HTTP) Tells curl to use HTTP Basic authentication with the remote host. This
-is the default and this option is usually pointless, unless you use it to
-override a previously set option that sets a different authentication method
-(such as \fI--ntlm\fP, \fI--digest\fP, or \fI--negotiate\fP).
-
-Used together with \fI-u, --user\fP and \fI-x, --proxy\fP.
-
-See also \fI--proxy-basic\fP.
-.IP "-c, --cookie-jar <file name>"
-(HTTP) Specify to which file you want curl to write all cookies after a
-completed operation. Curl writes all cookies previously read from a specified
-file as well as all cookies received from remote server(s). If no cookies are
-known, no data will be written. The file will be written using the Netscape
-cookie file format. If you set the file name to a single dash, "-", the
-cookies will be written to stdout.
+.IP "--capath <dir>"
+(TLS) Tells curl to use the specified certificate directory to verify the
+peer. Multiple paths can be provided by separating them with ":" (e.g.
+\&"path1:path2:path3"). The certificates must be in PEM format, and if curl is
+built against OpenSSL, the directory must have been processed using the
+c_rehash utility supplied with OpenSSL. Using \fI--capath\fP can allow
+OpenSSL-powered curl to make SSL-connections much more efficiently than using
+\fI--cacert\fP if the --cacert file contains many CA certificates.
 
-This command line option will activate the cookie engine that makes curl
-record and use cookies. Another way to activate it is to use the \fI-b,
---cookie\fP option.
+If this option is set, the default capath value will be ignored, and if it is
+used several times, the last one will be used.
+.IP "--cert-status"
+(TLS) Tells curl to verify the status of the server certificate by using the
+Certificate Status Request (aka. OCSP stapling) TLS extension.
 
-If the cookie jar can't be created or written to, the whole curl operation
-won't fail or even report an error clearly. Using -v will get a warning
-displayed, but that is the only visible feedback you get about this possibly
-lethal situation.
+If this option is enabled and the server sends an invalid (e.g. expired)
+response, if the response suggests that the server certificate has been revoked,
+or no response at all is received, the verification fails.
 
-Since 7.43.0 cookies that were imported in the Set-Cookie format without a
-domain name are not exported by this option.
+This is currently only implemented in the OpenSSL, GnuTLS and NSS backends.
 
-If this option is used several times, the last specified file name will be
-used.
-.IP "-C, --continue-at <offset>"
-Continue/Resume a previous file transfer at the given offset. The given offset
-is the exact number of bytes that will be skipped, counting from the beginning
-of the source file before it is transferred to the destination.  If used with
-uploads, the FTP server command SIZE will not be used by curl.
+Added in 7.41.0. 
+.IP "--cert-type <type>"
+(TLS) Tells curl what certificate type the provided certificate is in. PEM, DER and
+ENG are recognized types.  If not specified, PEM is assumed.
 
-Use "-C -" to tell curl to automatically find out where/how to resume the
-transfer. It then uses the given output/input files to figure that out.
+If this option is used several times, the last one will be used.
+
+See also \fI-E, --cert\fP and \fI--key\fP and \fI--key-type\fP. 
+.IP "-E, --cert <certificate[:password]>"
+(TLS) Tells curl to use the specified client certificate file when getting a file
+with HTTPS, FTPS or another SSL-based protocol. The certificate must be in
+PKCS#12 format if using Secure Transport, or PEM format if using any other
+engine.  If the optional password isn't specified, it will be queried for on
+the terminal. Note that this option assumes a \&"certificate" file that is the
+private key and the client certificate concatenated! See \fI-E, --cert\fP and \fI--key\fP to
+specify them independently.
+
+If curl is built against the NSS SSL library then this option can tell
+curl the nickname of the certificate to use within the NSS database defined
+by the environment variable SSL_DIR (or by default /etc/pki/nssdb). If the
+NSS PEM PKCS#11 module (libnsspem.so) is available then PEM files may be
+loaded. If you want to use a file from the current directory, please precede
+it with "./" prefix, in order to avoid confusion with a nickname.  If the
+nickname contains ":", it needs to be preceded by "\\" so that it is not
+recognized as password delimiter.  If the nickname contains "\\", it needs to
+be escaped as "\\\\" so that it is not recognized as an escape character.
+
+(iOS and macOS only) If curl is built against Secure Transport, then the
+certificate string can either be the name of a certificate/private key in the
+system or user keychain, or the path to a PKCS#12-encoded certificate and
+private key. If you want to use a file from the current directory, please
+precede it with "./" prefix, in order to avoid confusion with a nickname.
 
 If this option is used several times, the last one will be used.
+
+See also \fI--cert-type\fP and \fI--key\fP and \fI--key-type\fP. 
 .IP "--ciphers <list of ciphers>"
-(SSL) Specifies which ciphers to use in the connection. The list of ciphers
-must specify valid ciphers. Read up on SSL cipher list details on this URL:
-\fIhttps://www.openssl.org/docs/apps/ciphers.html\fP
+(TLS) Specifies which ciphers to use in the connection. The list of ciphers must
+specify valid ciphers. Read up on SSL cipher list details on this URL:
+
+ https://www.openssl.org/docs/apps/ciphers.html
 
 NSS ciphers are done differently than OpenSSL and GnuTLS. The full list of NSS
 ciphers is in the NSSCipherSuite entry at this URL:
-\fIhttps://git.fedorahosted.org/cgit/mod_nss.git/plain/docs/mod_nss.html#Directives\fP
+
+ https://git.fedorahosted.org/cgit/mod_nss.git/plain/docs/mod_nss.html#Directives
 
 If this option is used several times, the last one will be used.
 .IP "--compressed"
-(HTTP) Request a compressed response using one of the algorithms curl
-supports, and save the uncompressed document.  If this option is used and the
-server sends an unsupported encoding, curl will report an error.
+(HTTP) Request a compressed response using one of the algorithms curl supports, and
+save the uncompressed document.  If this option is used and the server sends
+an unsupported encoding, curl will report an error.
+.IP "-K, --config <file>"
+Specify which config file to read curl arguments from. The config file is a
+text file in which command line arguments can be written which then will be
+used as if they were written on the actual command line.
+
+Options and their parameters must be specified on the same config file line,
+separated by whitespace, colon, or the equals sign. Long option names can
+optionally be given in the config file without the initial double dashes and
+if so, the colon or equals characters can be used as separators. If the option
+is specified with one or two dashes, there can be no colon or equals character
+between the option and its parameter.
+
+If the parameter is to contain whitespace, the parameter must be enclosed
+within quotes. Within double quotes, the following escape sequences are
+available: \\\\, \\", \\t, \\n, \\r and \\v. A backslash preceding any other
+letter is ignored. If the first column of a config line is a '#' character,
+the rest of the line will be treated as a comment. Only write one option per
+physical line in the config file.
+
+Specify the filename to \fI-K, --config\fP as '-' to make curl read the file from stdin.
+
+Note that to be able to specify a URL in the config file, you need to specify
+it using the \fI--url\fP option, and not by simply writing the URL on its own
+line. So, it could look similar to this:
+
+url = "https://curl.haxx.se/docs/"
+
+When curl is invoked, it always (unless \fI-q, --disable\fP is used) checks for a
+default config file and uses it if found. The default config file is checked
+for in the following places in this order:
+
+1) curl tries to find the "home dir": It first checks for the CURL_HOME and
+then the HOME environment variables. Failing that, it uses getpwuid() on
+Unix-like systems (which returns the home dir given the current user in your
+system). On Windows, it then checks for the APPDATA variable, or as a last
+resort the '%USERPROFILE%\\Application Data'.
+
+2) On windows, if there is no _curlrc file in the home dir, it checks for one
+in the same dir the curl executable is placed. On Unix-like systems, it will
+simply try to load .curlrc from the determined home dir.
+
+.nf
+# --- Example file ---
+# this is a comment
+url = "example.com"
+output = "curlhere.html"
+user-agent = "superagent/1.0"
+
+# and fetch another URL too
+url = "example.com/docs/manpage.html"
+-O
+referer = "http://nowhereatall.example.com/"
+# --- End of example file ---
+.fi
+
+This option can be used multiple times to load multiple config files.
 .IP "--connect-timeout <seconds>"
 Maximum time in seconds that you allow curl's connection to take.  This only
 limits the connection phase, so if curl connects within the given period it
 will continue - if not it will exit.  Since version 7.32.0, this option
 accepts decimal values.
 
-See also the \fI-m, --max-time\fP option.
-
 If this option is used several times, the last one will be used.
-.IP "--create-dirs"
-When used in conjunction with the \fI-o\fP option, curl will create the
-necessary local directory hierarchy as needed. This option creates the dirs
-mentioned with the \fI-o\fP option, nothing else. If the \fI-o\fP file name
-uses no dir or if the dirs it mentions already exist, no dir will be created.
 
-To create remote directories when using FTP or SFTP, try
-\fI--ftp-create-dirs\fP.
-.IP "--crlf"
-Convert LF to CRLF in upload. Useful for MVS (OS/390).
+See also \fI-m, --max-time\fP. 
+.IP "--connect-to <HOST1:PORT1:HOST2:PORT2>"
 
-(SMTP added in 7.40.0)
-.IP "--crlfile <file>"
-(HTTPS/FTPS) Provide a file using PEM format with a Certificate Revocation
-List that may specify peer certificates that are to be considered revoked.
+For a request to the given HOST:PORT pair, connect to
+CONNECT-TO-HOST:CONNECT-TO-PORT instead.  This option is suitable to direct
+requests at a specific server, e.g. at a specific cluster node in a cluster of
+servers.  This option is only used to establish the network connection. It
+does NOT affect the hostname/port that is used for TLS/SSL (e.g. SNI,
+certificate verification) or for the application protocols.  "host" and "port"
+may be the empty string, meaning "any host/port".  "connect-to-host" and
+"connect-to-port" may also be the empty string, meaning "use the request's
+original host/port".
+
+This option can be used many times to add many connect rules.
+
+See also \fI--resolve\fP and \fI-H, --header\fP. Added in 7.49.0. 
+.IP "-C, --continue-at <offset>"
+Continue/Resume a previous file transfer at the given offset. The given offset
+is the exact number of bytes that will be skipped, counting from the beginning
+of the source file before it is transferred to the destination.  If used with
+uploads, the FTP server command SIZE will not be used by curl.
+
+Use "-C -" to tell curl to automatically find out where/how to resume the
+transfer. It then uses the given output/input files to figure that out.
 
 If this option is used several times, the last one will be used.
 
-(Added in 7.19.7)
-.IP "-d, --data <data>"
-(HTTP) Sends the specified data in a POST request to the HTTP server, in the
-same way that a browser does when a user has filled in an HTML form and
-presses the submit button. This will cause curl to pass the data to the server
-using the content-type application/x-www-form-urlencoded.  Compare to
-\fI-F, --form\fP.
+See also \fI-r, --range\fP. 
+.IP "-c, --cookie-jar <filename>"
+(HTTP) Specify to which file you want curl to write all cookies after a completed
+operation. Curl writes all cookies from its in-memory cookie storage to the
+given file at the end of operations. If no cookies are known, no data will be
+written. The file will be written using the Netscape cookie file format. If
+you set the file name to a single dash, "-", the cookies will be written to
+stdout.
 
-\fI-d, --data\fP is the same as \fI--data-ascii\fP. \fI--data-raw\fP is almost
-the same but does not have a special interpretation of the @ character. To
-post data purely binary, you should instead use the \fI--data-binary\fP option.
-To URL-encode the value of a form field you may use \fI--data-urlencode\fP.
+This command line option will activate the cookie engine that makes curl
+record and use cookies. Another way to activate it is to use the \fI-b, --cookie\fP
+option.
 
-If any of these options is used more than once on the same command line, the
-data pieces specified will be merged together with a separating
-&-symbol. Thus, using '-d name=daniel -d skill=lousy' would generate a post
-chunk that looks like \&'name=daniel&skill=lousy'.
+If the cookie jar can't be created or written to, the whole curl operation
+won't fail or even report an error clearly. Using \fI-v, --verbose\fP will get a warning
+displayed, but that is the only visible feedback you get about this possibly
+lethal situation.
 
-If you start the data with the letter @, the rest should be a file name to
-read the data from, or - if you want curl to read the data from
-stdin. Multiple files can also be specified. Posting data from a file
-named 'foobar' would thus be done with \fI--data\fP @foobar. When --data is
-told to read from a file like that, carriage returns and newlines will be
-stripped out. If you don't want the @ character to have a special
-interpretation use \fI--data-raw\fP instead.
-.IP "-D, --dump-header <file>"
-Write the received protocol headers to the specified file.
+If this option is used several times, the last specified file name will be
+used.
+.IP "-b, --cookie <data>"
+(HTTP) Pass the data to the HTTP server in the Cookie header. It is supposedly
+the data previously received from the server in a "Set-Cookie:" line.  The
+data should be in the format "NAME1=VALUE1; NAME2=VALUE2".
+
+If no '=' symbol is used in the argument, it is instead treated as a filename
+to read previously stored cookie from. This option also activates the cookie
+engine which will make curl record incoming cookies, which may be handy if
+you're using this in combination with the \fI-L, --location\fP option or do multiple URL
+transfers on the same invoke.
+
+The file format of the file to read cookies from should be plain HTTP headers
+(Set-Cookie style) or the Netscape/Mozilla cookie file format.
+
+The file specified with \fI-b, --cookie\fP is only used as input. No cookies will be
+written to the file. To store cookies, use the \fI-c, --cookie-jar\fP option.
+
+Exercise caution if you are using this option and multiple transfers may
+occur.  If you use the NAME1=VALUE1; format, or in a file use the Set-Cookie
+format and don't specify a domain, then the cookie is sent for any domain
+(even after redirects are followed) and cannot be modified by a server-set
+cookie. If the cookie engine is enabled and a server sets a cookie of the same
+name then both will be sent on a future transfer to that server, likely not
+what you intended.  To address these issues set a domain in Set-Cookie (doing
+that will include sub domains) or use the Netscape format.
 
-This option is handy to use when you want to store the headers that an HTTP
-site sends to you. Cookies from the headers could then be read in a second
-curl invocation by using the \fI-b, --cookie\fP option! The
-\fI-c, --cookie-jar\fP option is a better way to store cookies.
+If this option is used several times, the last one will be used.
 
-When used in FTP, the FTP server response lines are considered being "headers"
-and thus are saved there.
+Users very often want to both read cookies from a file and write updated
+cookies back to a file, so using both \fI-b, --cookie\fP and \fI-c, --cookie-jar\fP in the same
+command line is common.
+.IP "--create-dirs"
+When used in conjunction with the \fI-o, --output\fP option, curl will create the
+necessary local directory hierarchy as needed. This option creates the dirs
+mentioned with the \fI-o, --output\fP option, nothing else. If the --output file name
+uses no dir or if the dirs it mentions already exist, no dir will be created.
+
+To create remote directories when using FTP or SFTP, try \fI--ftp-create-dirs\fP.
+.IP "--crlf"
+(FTP SMTP) Convert LF to CRLF in upload. Useful for MVS (OS/390).
+
+(SMTP added in 7.40.0)
+.IP "--crlfile <file>"
+(TLS) Provide a file using PEM format with a Certificate Revocation List that may
+specify peer certificates that are to be considered revoked.
 
 If this option is used several times, the last one will be used.
+
+Added in 7.19.7. 
 .IP "--data-ascii <data>"
-See \fI-d, --data\fP.
+(HTTP) This is just an alias for \fI-d, --data\fP.
 .IP "--data-binary <data>"
-(HTTP) This posts data exactly as specified with no extra processing
-whatsoever.
+(HTTP) This posts data exactly as specified with no extra processing whatsoever.
 
 If you start the data with the letter @, the rest should be a filename.  Data
-is posted in a similar manner as \fI--data-ascii\fP does, except that newlines
-and carriage returns are preserved and conversions are never done.
+is posted in a similar manner as \fI-d, --data\fP does, except that newlines and
+carriage returns are preserved and conversions are never done.
 
 If this option is used several times, the ones following the first will append
 data as described in \fI-d, --data\fP.
 .IP "--data-raw <data>"
-(HTTP) This posts data similarly to \fI--data\fP but without the special
-interpretation of the @ character. See \fI-d, --data\fP.
-(Added in 7.43.0)
+(HTTP) This posts data similarly to \fI-d, --data\fP but without the special
+interpretation of the @ character.
+
+See also \fI-d, --data\fP. Added in 7.43.0. 
 .IP "--data-urlencode <data>"
-(HTTP) This posts data, similar to the other --data options with the exception
-that this performs URL-encoding. (Added in 7.18.0)
+(HTTP) This posts data, similar to the other \fI-d, --data\fP options with the exception
+that this performs URL-encoding.
 
 To be CGI-compliant, the <data> part should begin with a \fIname\fP followed
 by a separator and a content specification. The <data> part can be passed to
@@ -410,9 +466,36 @@ URL-encode that data and pass it on in the POST. The name part gets an equal
 sign appended, resulting in \fIname=urlencoded-file-content\fP. Note that the
 name is expected to be URL-encoded already.
 .RE
-.IP "--delegation LEVEL"
-Set \fILEVEL\fP to tell the server what it is allowed to delegate when it
-comes to user credentials. Used with GSS/kerberos.
+
+See also \fI-d, --data\fP and \fI--data-raw\fP. Added in 7.18.0. 
+.IP "-d, --data <data>"
+(HTTP) Sends the specified data in a POST request to the HTTP server, in the same way
+that a browser does when a user has filled in an HTML form and presses the
+submit button. This will cause curl to pass the data to the server using the
+content-type application/x-www-form-urlencoded.  Compare to \fI-F, --form\fP.
+
+\fI--data-raw\fP is almost the same but does not have a special interpretation of
+the @ character. To post data purely binary, you should instead use the
+\fI--data-binary\fP option.  To URL-encode the value of a form field you may use
+\fI--data-urlencode\fP.
+
+If any of these options is used more than once on the same command line, the
+data pieces specified will be merged together with a separating
+&-symbol. Thus, using '-d name=daniel -d skill=lousy' would generate a post
+chunk that looks like \&'name=daniel&skill=lousy'.
+
+If you start the data with the letter @, the rest should be a file name to
+read the data from, or - if you want curl to read the data from
+stdin. Multiple files can also be specified. Posting data from a file named
+'foobar' would thus be done with \fI\fI-d, --data\fP\fP @foobar. When --data is told to
+read from a file like that, carriage returns and newlines will be stripped
+out. If you don't want the @ character to have a special interpretation use
+\fI--data-raw\fP instead.
+
+See also \fI--data-binary\fP and \fI--data-urlencode\fP and \fI--data-raw\fP. This option overrides \fI-F, --form\fP and \fI-I, --head\fP and \fI--upload\fP. 
+.IP "--delegation <LEVEL>"
+(GSS/kerberos) Set LEVEL to tell the server what it is allowed to delegate when it
+comes to user credentials.
 .RS
 .IP "none"
 Don't allow any delegation.
@@ -423,203 +506,107 @@ service ticket, which is a matter of realm policy.
 Unconditionally allow the server to delegate.
 .RE
 .IP "--digest"
-(HTTP) Enables HTTP Digest authentication. This is an authentication scheme
-that prevents the password from being sent over the wire in clear text. Use
-this in combination with the normal \fI-u, --user\fP option to set user name
-and password. See also \fI--ntlm\fP, \fI--negotiate\fP and \fI--anyauth\fP for
-related options.
+(HTTP) Enables HTTP Digest authentication. This is an authentication scheme that
+prevents the password from being sent over the wire in clear text. Use this in
+combination with the normal \fI-u, --user\fP option to set user name and password.
 
 If this option is used several times, only the first one is used.
+
+See also \fI-u, --user\fP and \fI--proxy-digest\fP and \fI--anyauth\fP. This option overrides \fI--basic\fP and \fI--ntlm\fP and \fI--negotiate\fP. 
 .IP "--disable-eprt"
-(FTP) Tell curl to disable the use of the EPRT and LPRT commands when doing
-active FTP transfers. Curl will normally always first attempt to use EPRT,
-then LPRT before using PORT, but with this option, it will use PORT right
-away. EPRT and LPRT are extensions to the original FTP protocol, and may not
-work on all servers, but they enable more functionality in a better way than
-the traditional PORT command.
+(FTP) Tell curl to disable the use of the EPRT and LPRT commands when doing active
+FTP transfers. Curl will normally always first attempt to use EPRT, then LPRT
+before using PORT, but with this option, it will use PORT right away. EPRT and
+LPRT are extensions to the original FTP protocol, and may not work on all
+servers, but they enable more functionality in a better way than the
+traditional PORT command.
 
-\fB--eprt\fP can be used to explicitly enable EPRT again and \fB--no-eprt\fP
-is an alias for \fB--disable-eprt\fP.
+--eprt can be used to explicitly enable EPRT again and --no-eprt is an alias
+for \fI--disable-eprt\fP.
 
-If the server is an IPv6 host, this option will have no effect as EPRT is
-necessary then.
+If the server is accessed using IPv6, this option will have no effect as EPRT
+is necessary then.
 
 Disabling EPRT only changes the active behavior. If you want to switch to
-passive mode you need to not use \fI-P, --ftp-port\fP or force it with
-\fI--ftp-pasv\fP.
+passive mode you need to not use \fI-P, --ftp-port\fP or force it with \fI--ftp-pasv\fP.
 .IP "--disable-epsv"
-(FTP) Tell curl to disable the use of the EPSV command when doing passive FTP
+(FTP) (FTP) Tell curl to disable the use of the EPSV command when doing passive FTP
 transfers. Curl will normally always first attempt to use EPSV before PASV,
 but with this option, it will not try using EPSV.
 
-\fB--epsv\fP can be used to explicitly enable EPSV again and \fB--no-epsv\fP
-is an alias for \fB--disable-epsv\fP.
+--epsv can be used to explicitly enable EPSV again and --no-epsv is an alias
+for \fI--disable-epsv\fP.
 
 If the server is an IPv6 host, this option will have no effect as EPSV is
 necessary then.
 
 Disabling EPSV only changes the passive behavior. If you want to switch to
 active mode you need to use \fI-P, --ftp-port\fP.
+.IP "-q, --disable"
+If used as the first parameter on the command line, the \fIcurlrc\fP config
+file will not be read and used. See the \fI-K, --config\fP for details on the default
+config file search path.
 .IP "--dns-interface <interface>"
-Tell curl to send outgoing DNS requests through <interface>. This option
-is a counterpart to \fI--interface\fP (which does not affect DNS). The
-supplied string must be an interface name (not an address).
-
-This option requires that libcurl was built with a resolver backend that
-supports this operation. The c-ares backend is the only such one. (Added in
-7.33.0)
-.IP "--dns-ipv4-addr <ip-address>"
-Tell curl to bind to <ip-address> when making IPv4 DNS requests, so that
+(DNS) Tell curl to send outgoing DNS requests through <interface>. This option is a
+counterpart to \fI--interface\fP (which does not affect DNS). The supplied string
+must be an interface name (not an address).
+
+See also \fI--dns-ipv4-addr\fP and \fI--dns-ipv6-addr\fP. \fI--dns-interface\fP requires that the underlying libcurl was built to support c-ares. Added in 7.33.0. 
+.IP "--dns-ipv4-addr <address>"
+(DNS) Tell curl to bind to <ip-address> when making IPv4 DNS requests, so that
 the DNS requests originate from this address. The argument should be a
 single IPv4 address.
 
-This option requires that libcurl was built with a resolver backend that
-supports this operation. The c-ares backend is the only such one.  (Added in
-7.33.0)
-.IP "--dns-ipv6-addr <ip-address>"
-Tell curl to bind to <ip-address> when making IPv6 DNS requests, so that
+See also \fI--dns-interface\fP and \fI--dns-ipv6-addr\fP. \fI--dns-ipv4-addr\fP requires that the underlying libcurl was built to support c-ares. Added in 7.33.0. 
+.IP "--dns-ipv6-addr <address>"
+(DNS) Tell curl to bind to <ip-address> when making IPv6 DNS requests, so that
 the DNS requests originate from this address. The argument should be a
 single IPv6 address.
 
-This option requires that libcurl was built with a resolver backend that
-supports this operation. The c-ares backend is the only such one.  (Added in
-7.33.0)
-.IP "--dns-servers <ip-address,ip-address>"
+See also \fI--dns-interface\fP and \fI--dns-ipv4-addr\fP. \fI--dns-ipv6-addr\fP requires that the underlying libcurl was built to support c-ares. Added in 7.33.0. 
+.IP "--dns-servers <addresses>"
 Set the list of DNS servers to be used instead of the system default.
 The list of IP addresses should be separated with commas. Port numbers
 may also optionally be given as \fI:<port-number>\fP after each IP
 address.
 
-This option requires that libcurl was built with a resolver backend that
-supports this operation. The c-ares backend is the only such one.  (Added in
-7.33.0)
-.IP "-e, --referer <URL>"
-(HTTP) Sends the "Referrer Page" information to the HTTP server. This can also
-be set with the \fI-H, --header\fP flag of course.  When used with
-\fI-L, --location\fP you can append ";auto" to the --referer URL to make curl
-automatically set the previous URL when it follows a Location: header. The
-\&";auto" string can be used alone, even if you don't set an initial --referer.
+\fI--dns-servers\fP requires that the underlying libcurl was built to support c-ares. Added in 7.33.0. 
+.IP "-D, --dump-header <filename>"
+(HTTP FTP) Write the received protocol headers to the specified file.
 
-If this option is used several times, the last one will be used.
-.IP "-E, --cert <certificate[:password]>"
-(SSL) Tells curl to use the specified client certificate file when getting a
-file with HTTPS, FTPS or another SSL-based protocol. The certificate must be
-in PKCS#12 format if using Secure Transport, or PEM format if using any other
-engine.  If the optional password isn't specified, it will be queried for on
-the terminal. Note that this option assumes a \&"certificate" file that is the
-private key and the client certificate concatenated! See \fI--cert\fP and
-\fI--key\fP to specify them independently.
-
-If curl is built against the NSS SSL library then this option can tell
-curl the nickname of the certificate to use within the NSS database defined
-by the environment variable SSL_DIR (or by default /etc/pki/nssdb). If the
-NSS PEM PKCS#11 module (libnsspem.so) is available then PEM files may be
-loaded. If you want to use a file from the current directory, please precede
-it with "./" prefix, in order to avoid confusion with a nickname.  If the
-nickname contains ":", it needs to be preceded by "\\" so that it is not
-recognized as password delimiter.  If the nickname contains "\\", it needs to
-be escaped as "\\\\" so that it is not recognized as an escape character.
+This option is handy to use when you want to store the headers that an HTTP
+site sends to you. Cookies from the headers could then be read in a second
+curl invocation by using the \fI-b, --cookie\fP option! The \fI-c, --cookie-jar\fP option is a
+better way to store cookies.
 
-(iOS and macOS only) If curl is built against Secure Transport, then the
-certificate string can either be the name of a certificate/private key in the
-system or user keychain, or the path to a PKCS#12-encoded certificate and
-private key. If you want to use a file from the current directory, please
-precede it with "./" prefix, in order to avoid confusion with a nickname.
+When used in FTP, the FTP server response lines are considered being "headers"
+and thus are saved there.
 
 If this option is used several times, the last one will be used.
+
+See also \fI-o, --output\fP. 
+.IP "--egd-file <file>"
+(TLS) Specify the path name to the Entropy Gathering Daemon socket. The socket is
+used to seed the random engine for SSL connections.
+
+See also \fI--random-file\fP. 
 .IP "--engine <name>"
-Select the OpenSSL crypto engine to use for cipher
-operations. Use \fI--engine list\fP to print a list of build-time supported
-engines. Note that not all (or none) of the engines may be available at
-run-time.
+(TLS) Select the OpenSSL crypto engine to use for cipher operations. Use \fI\fI--engine\fP
+list\fP to print a list of build-time supported engines. Note that not all (or
+none) of the engines may be available at run-time.
 .IP "--environment"
-(RISC OS ONLY) Sets a range of environment variables, using the names the
-\fI-w\fP option supports, to allow easier extraction of useful information
-after having run curl.
-.IP "--egd-file <file>"
-(SSL) Specify the path name to the Entropy Gathering Daemon socket. The socket
-is used to seed the random engine for SSL connections. See also the
-\fI--random-file\fP option.
+Sets a range of environment variables, using the names the \fI-w, --write-out\fP option
+supports, to allow easier extraction of useful information after having run
+curl.
+
+\fI--environment\fP requires that the underlying libcurl was built to support RISC OS. 
 .IP "--expect100-timeout <seconds>"
 (HTTP) Maximum time in seconds that you allow curl to wait for a 100-continue
 response when curl emits an Expects: 100-continue header in its request. By
 default curl will wait one second. This option accepts decimal values! When
 curl stops waiting, it will continue as if the response has been received.
 
-(Added in 7.47.0)
-.IP "--cert-type <type>"
-(SSL) Tells curl what certificate type the provided certificate is in. PEM,
-DER and ENG are recognized types.  If not specified, PEM is assumed.
-
-If this option is used several times, the last one will be used.
-.IP "--cacert <CA certificate>"
-(SSL) Tells curl to use the specified certificate file to verify the peer. The
-file may contain multiple CA certificates. The certificate(s) must be in PEM
-format. Normally curl is built to use a default file for this, so this option
-is typically used to alter that default file.
-
-curl recognizes the environment variable named 'CURL_CA_BUNDLE' if it is
-set, and uses the given path as a path to a CA cert bundle. This option
-overrides that variable.
-
-The windows version of curl will automatically look for a CA certs file named
-\'curl-ca-bundle.crt\', either in the same directory as curl.exe, or in the
-Current Working Directory, or in any folder along your PATH.
-
-If curl is built against the NSS SSL library, the NSS PEM PKCS#11 module
-(libnsspem.so) needs to be available for this option to work properly.
-
-(iOS and macOS only) If curl is built against Secure Transport, then this
-option is supported for backward compatibility with other SSL engines, but it
-should not be set. If the option is not set, then curl will use the
-certificates in the system and user Keychain to verify the peer, which is the
-preferred method of verifying the peer's certificate chain.
-
-If this option is used several times, the last one will be used.
-.IP "--capath <CA certificate directory>"
-(SSL) Tells curl to use the specified certificate directory to verify the
-peer. Multiple paths can be provided by separating them with ":" (e.g.
-\&"path1:path2:path3"). The certificates must be in PEM format, and if curl is
-built against OpenSSL, the directory must have been processed using the
-c_rehash utility supplied with OpenSSL. Using \fI--capath\fP can allow
-OpenSSL-powered curl to make SSL-connections much more efficiently than using
-\fI--cacert\fP if the \fI--cacert\fP file contains many CA certificates.
-
-If this option is set, the default capath value will be ignored, and if it is
-used several times, the last one will be used.
-.IP "--pinnedpubkey <pinned public key (hashes)>"
-(SSL) Tells curl to use the specified public key file (or hashes) to verify the
-peer. This can be a path to a file which contains a single public key in PEM or
-DER format, or any number of base64 encoded sha256 hashes preceded by
-\'sha256//\' and separated by \';\'
-
-When negotiating a TLS or SSL connection, the server sends a certificate
-indicating its identity. A public key is extracted from this certificate and
-if it does not exactly match the public key provided to this option, curl will
-abort the connection before sending or receiving any data.
-
-PEM/DER support:
-  7.39.0: OpenSSL, GnuTLS and GSKit
-  7.43.0: NSS and wolfSSL/CyaSSL
-  7.47.0: mbedtls
-  7.49.0: PolarSSL
-sha256 support:
-  7.44.0: OpenSSL, GnuTLS, NSS and wolfSSL/CyaSSL.
-  7.47.0: mbedtls
-  7.49.0: PolarSSL
-Other SSL backends not supported.
-
-If this option is used several times, the last one will be used.
-.IP "--cert-status"
-(SSL) Tells curl to verify the status of the server certificate by using the
-Certificate Status Request (aka. OCSP stapling) TLS extension.
-
-If this option is enabled and the server sends an invalid (e.g. expired)
-response, if the response suggests that the server certificate has been revoked,
-or no response at all is received, the verification fails.
-
-This is currently only implemented in the OpenSSL, GnuTLS and NSS backends.
-(Added in 7.41.0)
+See also \fI--connect-timeout\fP. Added in 7.47.0. 
 .IP "--fail-early"
 Fail and exit on first detected error.
 
@@ -634,32 +621,40 @@ that fails, independent on the amount of more URLs that are given on the
 command line. This way, no transfer failures go undetected by scripts and
 similar.
 
-This option will apply for all given URLs even if you use \fI--next\fP.
+This option will apply for all given URLs even if you use \fI-:, --next\fP.
 
-(Added in 7.52.0)
-.IP "--false-start"
+Added in 7.52.0. 
+.IP "-f, --fail"
+(HTTP) Fail silently (no output at all) on server errors. This is mostly done to
+better enable scripts etc to better deal with failed attempts. In normal cases
+when an HTTP server fails to deliver a document, it returns an HTML document
+stating so (which often also describes why and more). This flag will prevent
+curl from outputting that and return error 22.
 
-(SSL) Tells curl to use false start during the TLS handshake. False start is a
-mode where a TLS client will start sending application data before verifying
-the server's Finished message, thus saving a round trip when performing a full
+This method is not fail-safe and there are occasions where non-successful
+response codes will slip through, especially when authentication is involved
+(response codes 401 and 407).
+.IP "--false-start"
+(TLS) Tells curl to use false start during the TLS handshake. False start is a mode
+where a TLS client will start sending application data before verifying the
+server's Finished message, thus saving a round trip when performing a full
 handshake.
 
 This is currently only implemented in the NSS and Secure Transport (on iOS 7.0
 or later, or OS X 10.9 or later) backends.
-(Added in 7.42.0)
-.IP "-f, --fail"
-(HTTP) Fail silently (no output at all) on server errors. This is mostly done
-to better enable scripts etc to better deal with failed attempts. In normal
-cases when an HTTP server fails to deliver a document, it returns an HTML
-document stating so (which often also describes why and more). This flag will
-prevent curl from outputting that and return error 22.
 
-This method is not fail-safe and there are occasions where non-successful
-response codes will slip through, especially when authentication is involved
-(response codes 401 and 407).
+Added in 7.42.0. 
+.IP "--form-string <name=string>"
+(HTTP) Similar to \fI-F, --form\fP except that the value string for the named parameter is used
+literally. Leading \&'@' and \&'<' characters, and the \&';type=' string in
+the value have no special meaning. Use this in preference to \fI-F, --form\fP\fP if
+there's any possibility that the string value may accidentally trigger the
+\&'@' or \&'<' features of \fI-F, --form\fP.
+
+See also \fI-F, --form\fP. 
 .IP "-F, --form <name=content>"
-(HTTP) This lets curl emulate a filled-in form in which a user has pressed the
-submit button. This causes curl to POST data using the Content-Type
+(HTTP) This lets curl emulate a filled-in form in which a user has pressed the submit
+button. This causes curl to POST data using the Content-Type
 multipart/form-data according to RFC 2388. This enables uploading of binary
 files etc. To force the 'content' part to be a file, prefix the file name with
 an @ sign. To just get the content part from a file, prefix the file name with
@@ -670,7 +665,7 @@ get the contents for that text field from a file.
 Example: to send an image to a server, where \&'profile' is the name of the
 form-field to which portrait.jpg will be the input:
 
-\fBcurl\fP -F profile=@portrait.jpg https://example.com/upload.cgi
+ curl -F profile=@portrait.jpg https://example.com/upload.cgi
 
 To read content from stdin instead of a file, use - as the filename. This goes
 for both @ and < constructs. Unfortunately it does not support reading the
@@ -680,24 +675,24 @@ transfer starts.
 You can also tell curl what Content-Type to use by using 'type=', in a manner
 similar to:
 
-\fBcurl\fP -F "web=@index.html;type=text/html" example.com
+ curl -F "web=@index.html;type=text/html" example.com
 
 or
 
-\fBcurl\fP -F "name=daniel;type=text/foo" example.com
+ curl -F "name=daniel;type=text/foo" example.com
 
 You can also explicitly change the name field of a file upload part by setting
 filename=, like this:
 
-\fBcurl\fP -F "file=@localfile;filename=nameinpost" example.com
+ curl -F "file=@localfile;filename=nameinpost" example.com
 
 If filename/path contains ',' or ';', it must be quoted by double-quotes like:
 
-\fBcurl\fP -F "file=@\\"localfile\\";filename=\\"nameinpost\\"" example.com
+ curl -F "file=@\\"localfile\\";filename=\\"nameinpost\\"" example.com
 
 or
 
-\fBcurl\fP -F 'file=@"localfile";filename="nameinpost"' example.com
+ curl -F 'file=@"localfile";filename="nameinpost"' example.com
 
 Note that if a filename/path is quoted by double-quotes, any double-quote
 or backslash within the filename must be escaped by backslash.
@@ -705,23 +700,29 @@ or backslash within the filename must be escaped by backslash.
 See further examples and details in the MANUAL.
 
 This option can be used multiple times.
-.IP "--ftp-account [data]"
-(FTP) When an FTP server asks for "account data" after user name and password
-has been provided, this data is sent off using the ACCT command. (Added in
-7.13.0)
+
+This option overrides \fI-d, --data\fP and \fI-I, --head\fP and \fI--upload\fP. 
+.IP "--ftp-account <data>"
+(FTP) When an FTP server asks for "account data" after user name and password has
+been provided, this data is sent off using the ACCT command.
 
 If this option is used several times, the last one will be used.
+
+Added in 7.13.0. 
 .IP "--ftp-alternative-to-user <command>"
-(FTP) If authenticating with the USER and PASS commands fails, send this
-command.  When connecting to Tumbleweed's Secure Transport server over FTPS
-using a client certificate, using "SITE AUTH" will tell the server to retrieve
-the username from the certificate. (Added in 7.15.5)
+(FTP) If authenticating with the USER and PASS commands fails, send this command.
+When connecting to Tumbleweed's Secure Transport server over FTPS using a
+client certificate, using "SITE AUTH" will tell the server to retrieve the
+username from the certificate.
+
+Added in 7.15.5. 
 .IP "--ftp-create-dirs"
-(FTP/SFTP) When an FTP or SFTP URL/operation uses a path that doesn't
-currently exist on the server, the standard behavior of curl is to
-fail. Using this option, curl will instead attempt to create missing
-directories.
-.IP "--ftp-method [method]"
+(FTP SFTP) When an FTP or SFTP URL/operation uses a path that doesn't currently exist on
+the server, the standard behavior of curl is to fail. Using this option, curl
+will instead attempt to create missing directories.
+
+See also \fI--create-dirs\fP. 
+.IP "--ftp-method <method>"
 (FTP) Control what method curl should use to reach a file on an FTP(S)
 server. The method argument should be one of the following alternatives:
 .RS
@@ -737,12 +738,12 @@ curl does one CWD with the full target directory and then operates on the file
 \&"normally" (like in the multicwd case). This is somewhat more standards
 compliant than 'nocwd' but without the full penalty of 'multicwd'.
 .RE
-.IP
-(Added in 7.15.1)
+
+Added in 7.15.1. 
 .IP "--ftp-pasv"
 (FTP) Use passive mode for the data connection. Passive is the internal default
-behavior, but using this option can be used to override a previous
-\fI-P/-ftp-port\fP option. (Added in 7.11.0)
+behavior, but using this option can be used to override a previous \fI-P, --ftp-port\fP
+option.
 
 If this option is used several times, only the first one is used. Undoing an
 enforced passive really isn't doable but you must then instead enforce the
@@ -750,75 +751,104 @@ correct \fI-P, --ftp-port\fP again.
 
 Passive mode means that curl will try the EPSV command first and then PASV,
 unless \fI--disable-epsv\fP is used.
+
+See also \fI--disable-epsv\fP. Added in 7.11.0. 
+.IP "-P, --ftp-port <address>"
+(FTP) Reverses the default initiator/listener roles when connecting with FTP. This
+option makes curl use active mode. curl then tells the server to connect back
+to the client's specified address and port, while passive mode asks the server
+to setup an IP address and port for it to connect to. <address> should be one
+of:
+.RS
+.IP interface
+i.e "eth0" to specify which interface's IP address you want to use (Unix only)
+.IP "IP address"
+i.e "192.168.10.1" to specify the exact IP address
+.IP "host name"
+i.e "my.host.domain" to specify the machine
+.IP "-"
+make curl pick the same IP address that is already used for the control
+connection
+.RE
+
+If this option is used several times, the last one will be used. Disable the
+use of PORT with \fI--ftp-pasv\fP. Disable the attempt to use the EPRT command
+instead of PORT by using \fI--disable-eprt\fP. EPRT is really PORT++.
+
+Since 7.19.5, you can append \&":[start]-[end]\&" to the right of the address,
+to tell curl what TCP port range to use. That means you specify a port range,
+from a lower to a higher number. A single number works as well, but do note
+that it increases the risk of failure since the port may not be available.
+
+See also \fI--ftp-pasv\fP and \fI--disable-eprt\fP. 
+.IP "--ftp-pret"
+(FTP) Tell curl to send a PRET command before PASV (and EPSV). Certain FTP servers,
+mainly drftpd, require this non-standard command for directory listings as
+well as up and downloads in PASV mode.
+
+Added in 7.20.0. 
 .IP "--ftp-skip-pasv-ip"
 (FTP) Tell curl to not use the IP address the server suggests in its response
 to curl's PASV command when curl connects the data connection. Instead curl
 will re-use the same IP address it already uses for the control
-connection. (Added in 7.14.2)
+connection.
 
 This option has no effect if PORT, EPRT or EPSV is used instead of PASV.
-.IP "--ftp-pret"
-(FTP) Tell curl to send a PRET command before PASV (and EPSV). Certain
-FTP servers, mainly drftpd, require this non-standard command for
-directory listings as well as up and downloads in PASV mode.
-(Added in 7.20.x)
+
+See also \fI--ftp-pasv\fP. Added in 7.14.2. 
+.IP "--ftp-ssl-ccc-mode <active/passive>"
+(FTP) Sets the CCC mode. The passive mode will not initiate the shutdown, but
+instead wait for the server to do it, and will not reply to the shutdown from
+the server. The active mode initiates the shutdown and waits for a reply from
+the server.
+
+See also \fI--ftp-ssl-ccc\fP. Added in 7.16.2. 
 .IP "--ftp-ssl-ccc"
-(FTP) Use CCC (Clear Command Channel)
-Shuts down the SSL/TLS layer after authenticating. The rest of the
-control channel communication will be unencrypted. This allows
-NAT routers to follow the FTP transaction. The default mode is
-passive. See \fI--ftp-ssl-ccc-mode\fP for other modes.
-(Added in 7.16.1)
-.IP "--ftp-ssl-ccc-mode [active/passive]"
-(FTP) Use CCC (Clear Command Channel)
-Sets the CCC mode. The passive mode will not initiate the shutdown, but
-instead wait for the server to do it, and will not reply to the
-shutdown from the server. The active mode initiates the shutdown and
-waits for a reply from the server.
-(Added in 7.16.2)
+(FTP) Use CCC (Clear Command Channel) Shuts down the SSL/TLS layer after
+authenticating. The rest of the control channel communication will be
+unencrypted. This allows NAT routers to follow the FTP transaction. The
+default mode is passive.
+
+See also \fI--ssl\fP and \fI--ftp-ssl-ccc-mode\fP. Added in 7.16.1. 
 .IP "--ftp-ssl-control"
 (FTP) Require SSL/TLS for the FTP login, clear for transfer.  Allows secure
 authentication, but non-encrypted data transfers for efficiency.  Fails the
-transfer if the server doesn't support SSL/TLS.  (Added in 7.16.0)
-that can still be used but will be removed in a future version.
-.IP "--ftp-ssl"
-(FTP) This deprecated option is now known as \fI--ssl\fP.
-.IP "--ftp-ssl-reqd"
-(FTP) This deprecated option is now known as \fI--ssl-reqd\fP.
-.IP "--form-string <name=string>"
-(HTTP) Similar to \fI--form\fP except that the value string for the named
-parameter is used literally. Leading \&'@' and \&'<' characters, and the
-\&';type=' string in the value have no special meaning. Use this in preference
-to \fI--form\fP if there's any possibility that the string value may
-accidentally trigger the \&'@' or \&'<' features of \fI--form\fP.
-.IP "-g, --globoff"
-This option switches off the "URL globbing parser". When you set this option,
-you can specify URLs that contain the letters {}[] without having them being
-interpreted by curl itself. Note that these letters are not normal legal URL
-contents but they should be encoded according to the URI standard.
+transfer if the server doesn't support SSL/TLS.
+
+Added in 7.16.0. 
 .IP "-G, --get"
-When used, this option will make all data specified with \fI-d, --data\fP,
-\fI--data-binary\fP or \fI--data-urlencode\fP to be used in an HTTP GET
-request instead of the POST request that otherwise would be used. The data
-will be appended to the URL with a '?' separator.
+When used, this option will make all data specified with \fI-d, --data\fP, \fI--data-binary\fP
+or \fI--data-urlencode\fP to be used in an HTTP GET request instead of the POST
+request that otherwise would be used. The data will be appended to the URL
+with a '?' separator.
 
-If used in combination with -I, the POST data will instead be appended to the
-URL with a HEAD request.
+If used in combination with \fI-I, --head\fP, the POST data will instead be appended to
+the URL with a HEAD request.
 
 If this option is used several times, only the first one is used. This is
 because undoing a GET doesn't make sense, but you should then instead enforce
 the alternative method you prefer.
+.IP "-g, --globoff"
+This option switches off the "URL globbing parser". When you set this option,
+you can specify URLs that contain the letters {}[] without having them being
+interpreted by curl itself. Note that these letters are not normal legal URL
+contents but they should be encoded according to the URI standard.
+.IP "-I, --head"
+(HTTP FTP FILE) Fetch the headers only! HTTP-servers feature the command HEAD which this uses
+to get nothing but the header of a document. When used on an FTP or FILE file,
+curl displays the file size and last modification time only.
 .IP "-H, --header <header>"
-(HTTP) Extra header to include in the request when sending HTTP to a
-server. You may specify any number of extra headers. Note that if you should
-add a custom header that has the same name as one of the internal ones curl
-would use, your externally set header will be used instead of the internal
-one. This allows you to make even trickier stuff than curl would normally
-do. You should not replace internally set headers without knowing perfectly
-well what you're doing. Remove an internal header by giving a replacement
-without content on the right side of the colon, as in: -H \&"Host:". If you
-send the custom header with no-value then its header must be terminated with a
-semicolon, such as \-H \&"X-Custom-Header;" to send "X-Custom-Header:".
+(HTTP) 
+Extra header to include in the request when sending HTTP to a server. You may
+specify any number of extra headers. Note that if you should add a custom
+header that has the same name as one of the internal ones curl would use, your
+externally set header will be used instead of the internal one. This allows
+you to make even trickier stuff than curl would normally do. You should not
+replace internally set headers without knowing perfectly well what you're
+doing. Remove an internal header by giving a replacement without content on
+the right side of the colon, as in: -H \&"Host:". If you send the custom
+header with no-value then its header must be terminated with a semicolon, such
+as \-H \&"X-Custom-Header;" to send "X-Custom-Header:".
 
 curl will make sure that each header you add/replace is sent with the proper
 end-of-line marker, you should thus \fBnot\fP add that as a part of the header
@@ -827,167 +857,151 @@ for you.
 
 See also the \fI-A, --user-agent\fP and \fI-e, --referer\fP options.
 
-Starting in 7.37.0, you need \fI--proxy-header\fP to send custom headers
-intended for a proxy.
+Starting in 7.37.0, you need \fI--proxy-header\fP to send custom headers intended
+for a proxy.
 
 Example:
 
-\&# curl -H "X-First-Name: Joe" http://example.com/
+ curl -H "X-First-Name: Joe" http://example.com/
 
 \fBWARNING\fP: headers set with this option will be set in all requests - even
-after redirects are followed, like when told with \fB-L, --location\fP. This
-can lead to the header being sent to other hosts than the original host, so
-sensitive headers should be used with caution combined with following
-redirects.
+after redirects are followed, like when told with \fI-L, --location\fP. This can lead to
+the header being sent to other hosts than the original host, so sensitive
+headers should be used with caution combined with following redirects.
 
 This option can be used multiple times to add/replace/remove multiple headers.
+.IP "-h, --help"
+Usage help. This lists all current command line options with a short
+description.
 .IP "--hostpubmd5 <md5>"
-(SCP/SFTP) Pass a string containing 32 hexadecimal digits. The string should
+(SFTP SCP) Pass a string containing 32 hexadecimal digits. The string should
 be the 128 bit MD5 checksum of the remote host's public key, curl will refuse
-the connection with the host unless the md5sums match. (Added in 7.17.1)
+the connection with the host unless the md5sums match.
+
+Added in 7.17.1. 
+.IP "-0, --http1.0"
+(HTTP) Tells curl to use HTTP version 1.0 instead of using its internally preferred
+HTTP version.
+
+This option overrides \fI--http1.1\fP and \fI--http2\fP. 
+.IP "--http1.1"
+(HTTP) Tells curl to use HTTP version 1.1.
+
+This option overrides \fI-0, --http1.0\fP and \fI--http2\fP. Added in 7.33.0. 
+.IP "--http2-prior-knowledge"
+(HTTP) Tells curl to issue its non-TLS HTTP requests using HTTP/2 without HTTP/1.1
+Upgrade. It requires prior knowledge that the server supports HTTP/2 straight
+away. HTTPS requests will still do HTTP/2 the standard way with negotiated
+protocol version in the TLS handshake.
+
+\fI--http2-prior-knowledge\fP requires that the underlying libcurl was built to support HTTP/2. This option overrides \fI--http1.1\fP and \fI-0, --http1.0\fP and \fI--http2\fP. Added in 7.49.0. 
+.IP "--http2"
+(HTTP) Tells curl to use HTTP version 2.
+
+See also \fI--no-alpn\fP. \fI--http2\fP requires that the underlying libcurl was built to support HTTP/2. This option overrides \fI--http1.1\fP and \fI-0, --http1.0\fP and \fI--http2-prior-knowledge\fP. Added in 7.33.0. 
 .IP "--ignore-content-length"
-For HTTP, Ignore the Content-Length header. This is particularly useful for
+(FTP HTTP) For HTTP, Ignore the Content-Length header. This is particularly useful for
 servers running Apache 1.x, which will report incorrect Content-Length for
 files larger than 2 gigabytes.
 
 For FTP (since 7.46.0), skip the RETR command to figure out the size before
 downloading a file.
 .IP "-i, --include"
-(HTTP) Include the HTTP-header in the output. The HTTP-header includes things
-like server-name, date of the document, HTTP-version and more...
-.IP "-I, --head"
-(HTTP/FTP/FILE)
-Fetch the HTTP-header only! HTTP-servers feature the command HEAD
-which this uses to get nothing but the header of a document. When used
-on an FTP or FILE file, curl displays the file size and last modification
-time only.
-.IP "--interface <name>"
-Perform an operation using a specified interface. You can enter interface
-name, IP address or host name. An example could look like:
-
- curl --interface eth0:1 https://www.example.com/
-
-If this option is used several times, the last one will be used.
-.IP "-j, --junk-session-cookies"
-(HTTP) When curl is told to read cookies from a given file, this option will
-make it discard all "session cookies". This will basically have the same effect
-as if a new session is started. Typical browsers always discard session
-cookies when they're closed down.
-.IP "-J, --remote-header-name"
-(HTTP) This option tells the \fI-O, --remote-name\fP option to use the
-server-specified Content-Disposition filename instead of extracting a filename
-from the URL.
-
-If the server specifies a file name and a file with that name already exists
-in the current working directory it will not be overwritten and an error will
-occur. If the server doesn't specify a file name then this option has no
-effect.
+Include the HTTP-header in the output. The HTTP-header includes things like
+server-name, date of the document, HTTP-version and more...
 
-There's no attempt to decode %-sequences (yet) in the provided file name, so
-this option may provide you with rather unexpected file names.
-
-\fBWARNING\fP: Exercise judicious use of this option, especially on Windows. A
-rogue server could send you the name of a DLL or other file that could possibly
-be loaded automatically by Windows or some third party software.
+See also \fI-v, --verbose\fP. 
 .IP "-k, --insecure"
-(SSL) This option explicitly allows curl to perform "insecure" SSL connections
-and transfers. All SSL connections are attempted to be made secure by using
-the CA certificate bundle installed by default. This makes all connections
-considered "insecure" fail unless \fI-k, --insecure\fP is used.
+(TLS) This option explicitly allows curl to perform "insecure" SSL connections and
+transfers. All SSL connections are attempted to be made secure by using the CA
+certificate bundle installed by default. This makes all connections considered
+\&"insecure" fail unless \fI-k, --insecure\fP is used.
 
 See this online resource for further details:
-\fBhttps://curl.haxx.se/docs/sslcerts.html\fP
-.IP "-K, --config <config file>"
-Specify which config file to read curl arguments from. The config file is a
-text file in which command line arguments can be written which then will be
-used as if they were written on the actual command line.
-
-Options and their parameters must be specified on the same config file line,
-separated by whitespace, colon, or the equals sign. Long option names can
-optionally be given in the config file without the initial double dashes and
-if so, the colon or equals characters can be used as separators. If the option
-is specified with one or two dashes, there can be no colon or equals character
-between the option and its parameter.
-
-If the parameter is to contain whitespace, the parameter must be enclosed
-within quotes. Within double quotes, the following escape sequences are
-available: \\\\, \\", \\t, \\n, \\r and \\v. A backslash preceding any other
-letter is ignored. If the first column of a config line is a '#' character,
-the rest of the line will be treated as a comment. Only write one option per
-physical line in the config file.
-
-Specify the filename to -K, --config as '-' to make curl read the file from
-stdin.
-
-Note that to be able to specify a URL in the config file, you need to specify
-it using the \fI--url\fP option, and not by simply writing the URL on its own
-line. So, it could look similar to this:
+ https://curl.haxx.se/docs/sslcerts.html
+.IP "--interface <name>"
 
-url = "https://curl.haxx.se/docs/"
+Perform an operation using a specified interface. You can enter interface
+name, IP address or host name. An example could look like:
 
-When curl is invoked, it always (unless \fI-q\fP is used) checks for a default
-config file and uses it if found. The default config file is checked for in
-the following places in this order:
+ curl --interface eth0:1 https://www.example.com/
 
-1) curl tries to find the "home dir": It first checks for the CURL_HOME and
-then the HOME environment variables. Failing that, it uses getpwuid() on
-Unix-like systems (which returns the home dir given the current user in your
-system). On Windows, it then checks for the APPDATA variable, or as a last
-resort the '%USERPROFILE%\\Application Data'.
+If this option is used several times, the last one will be used.
 
-2) On windows, if there is no _curlrc file in the home dir, it checks for one
-in the same dir the curl executable is placed. On Unix-like systems, it will
-simply try to load .curlrc from the determined home dir.
+See also \fI--dns-interface\fP. 
+.IP "-4, --ipv4"
+This option tells curl to resolve names to IPv4 addresses only, and not for
+example try IPv6.
 
-.nf
-# --- Example file ---
-# this is a comment
-url = "example.com"
-output = "curlhere.html"
-user-agent = "superagent/1.0"
+See also \fI--http1.1\fP and \fI--http2\fP. This option overrides \fI-6, --ipv6\fP. 
+.IP "-6, --ipv6"
+This option tells curl to resolve names to IPv6 addresses only, and not for
+example try IPv4.
 
-# and fetch another URL too
-url = "example.com/docs/manpage.html"
--O
-referer = "http://nowhereatall.example.com/"
-# --- End of example file ---
-.fi
+See also \fI--http1.1\fP and \fI--http2\fP. This option overrides \fI-6, --ipv6\fP. 
+.IP "-j, --junk-session-cookies"
+(HTTP) When curl is told to read cookies from a given file, this option will make it
+discard all "session cookies". This will basically have the same effect as if
+a new session is started. Typical browsers always discard session cookies when
+they're closed down.
 
-This option can be used multiple times to load multiple config files.
+See also \fI-b, --cookie\fP and \fI-c, --cookie-jar\fP. 
 .IP "--keepalive-time <seconds>"
 This option sets the time a connection needs to remain idle before sending
 keepalive probes and the time between individual keepalive probes. It is
 currently effective on operating systems offering the TCP_KEEPIDLE and
 TCP_KEEPINTVL socket options (meaning Linux, recent AIX, HP-UX and more). This
-option has no effect if \fI--no-keepalive\fP is used. (Added in 7.18.0)
+option has no effect if \fI--no-keepalive\fP is used.
 
 If this option is used several times, the last one will be used. If
 unspecified, the option defaults to 60 seconds.
-.IP "--key <key>"
-(SSL/SSH) Private key file name. Allows you to provide your private key in this
-separate file. For SSH, if not specified, curl tries the following candidates
-in order: '~/.ssh/id_rsa', '~/.ssh/id_dsa', './id_rsa', './id_dsa'.
 
-If this option is used several times, the last one will be used.
+Added in 7.18.0. 
 .IP "--key-type <type>"
-(SSL) Private key file type. Specify which type your \fI--key\fP provided
-private key is. DER, PEM, and ENG are supported. If not specified, PEM is
-assumed.
+(TLS) Private key file type. Specify which type your \fI--key\fP provided private key
+is. DER, PEM, and ENG are supported. If not specified, PEM is assumed.
+
+If this option is used several times, the last one will be used.
+.IP "--key <key>"
+(TLS SSH) Private key file name. Allows you to provide your private key in this separate
+file. For SSH, if not specified, curl tries the following candidates in order:
+'~/.ssh/id_rsa', '~/.ssh/id_dsa', './id_rsa', './id_dsa'.
 
 If this option is used several times, the last one will be used.
 .IP "--krb <level>"
-(FTP) Enable Kerberos authentication and use. The level must be entered and
-should be one of 'clear', 'safe', 'confidential', or 'private'. Should you use
-a level that is not one of these, 'private' will instead be used.
+(FTP) Enable Kerberos authentication and use. The level must be entered and should
+be one of 'clear', 'safe', 'confidential', or 'private'. Should you use a
+level that is not one of these, 'private' will instead be used.
+
+If this option is used several times, the last one will be used.
+
+\fI--krb\fP requires that the underlying libcurl was built to support Kerberos. 
+.IP "--libcurl <file>"
+Append this option to any ordinary curl command line, and you will get a
+libcurl-using C source code written to the file that does the equivalent
+of what your command-line operation does!
+
+If this option is used several times, the last given file name will be
+used.
+
+Added in 7.16.1. 
+.IP "--limit-rate <speed>"
+Specify the maximum transfer rate you want curl to use - for both downloads
+and uploads. This feature is useful if you have a limited pipe and you'd like
+your transfer not to use your entire bandwidth. To make it slower than it
+otherwise would be.
+
+The given speed is measured in bytes/second, unless a suffix is appended.
+Appending 'k' or 'K' will count the number as kilobytes, 'm' or M' makes it
+megabytes, while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and 1G.
 
-This option requires a library built with kerberos4 support. This is not
-very common. Use \fI-V, --version\fP to see if your curl supports it.
+If you also use the \fI-Y, --speed-limit\fP option, that option will take precedence and
+might cripple the rate-limiting slightly, to help keeping the speed-limit
+logic working.
 
 If this option is used several times, the last one will be used.
-.IP "--krb4 <level>"
-(FTP) This is the former name for \fI--krb\fP. Do not use.
 .IP "-l, --list-only"
-(FTP)
+(FTP POP3) (FTP)
 When listing an FTP directory, this switch forces a name-only view. This is
 especially useful if the user wants to machine-parse the contents of an FTP
 directory since the normal directory view doesn't use a standard look or
@@ -1002,18 +1016,34 @@ When retrieving a specific email from POP3, this switch forces a LIST command
 to be performed instead of RETR. This is particularly useful if the user wants
 to see if a specific message id exists on the server and what size it is.
 
-Note: When combined with \fI-X, --request <command>\fP, this option can be used
-to send an UIDL command instead, so the user may use the email's unique
-identifier rather than it's message id to make the request. (Added in 7.21.5)
+Note: When combined with \fI-X, --request\fP, this option can be used to send an UIDL
+command instead, so the user may use the email's unique identifier rather than
+it's message id to make the request.
+
+Added in 7.21.5. 
+.IP "--local-port <num/range>"
+Set a preferred single number or range (FROM-TO) of local port numbers to use
+for the connection(s).  Note that port numbers by nature are a scarce resource
+that will be busy at times so setting this range to something too narrow might
+cause unnecessary connection setup failures.
+
+Added in 7.15.2. 
+.IP "--location-trusted"
+(HTTP) Like \fI-L, --location\fP, but will allow sending the name + password to all hosts that
+the site may redirect to. This may or may not introduce a security breach if
+the site redirects you to a site to which you'll send your authentication info
+(which is plaintext in the case of HTTP Basic authentication).
+
+See also \fI-u, --user\fP. 
 .IP "-L, --location"
-(HTTP/HTTPS) If the server reports that the requested page has moved to a
-different location (indicated with a Location: header and a 3XX response code),
-this option will make curl redo the request on the new place. If used together
-with \fI-i, --include\fP or \fI-I, --head\fP, headers from all requested pages
-will be shown. When authentication is used, curl only sends its credentials to
-the initial host. If a redirect takes curl to a different host, it won't be
-able to intercept the user+password. See also \fI--location-trusted\fP on how
-to change this. You can limit the amount of redirects to follow by using the
+(HTTP) If the server reports that the requested page has moved to a different
+location (indicated with a Location: header and a 3XX response code), this
+option will make curl redo the request on the new place. If used together with
+\fI-i, --include\fP or \fI-I, --head\fP, headers from all requested pages will be shown. When
+authentication is used, curl only sends its credentials to the initial
+host. If a redirect takes curl to a different host, it won't be able to
+intercept the user+password. See also \fI--location-trusted\fP on how to change
+this. You can limit the amount of redirects to follow by using the
 \fI--max-redirs\fP option.
 
 When curl follows a redirect and the request is not a plain GET (for example
@@ -1022,84 +1052,35 @@ was 301, 302, or 303. If the response code was any other 3xx code, curl will
 re-send the following request using the same unmodified method.
 
 You can tell curl to not change the non-GET request method to GET after a 30x
-response by using the dedicated options for that: \fI--post301\fP,
-\fI--post302\fP and \fI--post303\fP.
-.IP "--libcurl <file>"
-Append this option to any ordinary curl command line, and you will get a
-libcurl-using C source code written to the file that does the equivalent
-of what your command-line operation does!
-
-If this option is used several times, the last given file name will be
-used. (Added in 7.16.1)
-.IP "--limit-rate <speed>"
-Specify the maximum transfer rate you want curl to use - for both downloads
-and uploads. This feature is useful if you have a limited pipe and you'd like
-your transfer not to use your entire bandwidth. To make it slower than it
-otherwise would be.
-
-The given speed is measured in bytes/second, unless a suffix is appended.
-Appending 'k' or 'K' will count the number as kilobytes, 'm' or M' makes it
-megabytes, while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and 1G.
-
-If you also use the \fI-Y, --speed-limit\fP option, that option will take
-precedence and might cripple the rate-limiting slightly, to help keeping the
-speed-limit logic working.
-
-If this option is used several times, the last one will be used.
-.IP "--local-port <num>[-num]"
-Set a preferred number or range of local port numbers to use for the
-connection(s).  Note that port numbers by nature are a scarce resource that
-will be busy at times so setting this range to something too narrow might
-cause unnecessary connection setup failures. (Added in 7.15.2)
-.IP "--location-trusted"
-(HTTP/HTTPS) Like \fI-L, --location\fP, but will allow sending the name +
-password to all hosts that the site may redirect to. This may or may not
-introduce a security breach if the site redirects you to a site to which
-you'll send your authentication info (which is plaintext in the case of HTTP
-Basic authentication).
-.IP "-m, --max-time <seconds>"
-Maximum time in seconds that you allow the whole operation to take.  This is
-useful for preventing your batch jobs from hanging for hours due to slow
-networks or links going down.  Since 7.32.0, this option accepts decimal
-values, but the actual timeout will decrease in accuracy as the specified
-timeout increases in decimal precision.  See also the \fI--connect-timeout\fP
-option.
-
-If this option is used several times, the last one will be used.
+response by using the dedicated options for that: \fI--post301\fP, \fI--post302\fP and
+\fI--post303\fP.
 .IP "--login-options <options>"
-Specify the login options to use during server authentication.
+(IMAP POP3 SMTP) Specify the login options to use during server authentication.
 
 You can use the login options to specify protocol specific options that may
 be used during authentication. At present only IMAP, POP3 and SMTP support
 login options. For more information about the login options please see
-RFC 2384, RFC 5092 and IETF draft draft-earhart-url-smtp-00.txt (Added in
-7.34.0).
+RFC 2384, RFC 5092 and IETF draft draft-earhart-url-smtp-00.txt
 
 If this option is used several times, the last one will be used.
+
+Added in 7.34.0. 
 .IP "--mail-auth <address>"
-(SMTP) Specify a single address. This will be used to specify the
-authentication address (identity) of a submitted message that is being relayed
-to another server.
+(SMTP) Specify a single address. This will be used to specify the authentication
+address (identity) of a submitted message that is being relayed to another
+server.
 
-(Added in 7.25.0)
+See also \fI--mail-rcpt\fP and \fI--mail-from\fP. Added in 7.25.0. 
 .IP "--mail-from <address>"
 (SMTP) Specify a single address that the given mail should get sent from.
 
-(Added in 7.20.0)
-.IP "--max-filesize <bytes>"
-Specify the maximum size (in bytes) of a file to download. If the file
-requested is larger than this value, the transfer will not start and curl will
-return with exit code 63.
-
-\fBNOTE:\fP The file size is not always known prior to download, and for such
-files this option has no effect even if the file transfer ends up being larger
-than this given limit. This concerns both FTP and HTTP transfers.
+See also \fI--mail-rcpt\fP and \fI--mail-auth\fP. Added in 7.20.0. 
 .IP "--mail-rcpt <address>"
 (SMTP) Specify a single address, user name or mailing list name. Repeat this
 option several times to send to multiple recipients.
 
 When performing a mail transfer, the recipient should specify a valid email
-address to send the mail to. (Added in 7.20.0)
+address to send the mail to.
 
 When performing an address verification (VRFY command), the recipient should be
 specified as the user name or user name and domain (as per Section 3.5 of
@@ -1108,13 +1089,37 @@ RFC5321). (Added in 7.34.0)
 When performing a mailing list expand (EXPN command), the recipient should be
 specified using the mailing list name, such as "Friends" or "London-Office".
 (Added in 7.34.0)
+
+Added in 7.20.0. 
+.IP "-M, --manual"
+Manual. Display the huge help text.
+.IP "--max-filesize <bytes>"
+Specify the maximum size (in bytes) of a file to download. If the file
+requested is larger than this value, the transfer will not start and curl will
+return with exit code 63.
+
+\fBNOTE:\fP The file size is not always known prior to download, and for such
+files this option has no effect even if the file transfer ends up being larger
+than this given limit. This concerns both FTP and HTTP transfers.
+
+See also \fI--limit-rate\fP. 
 .IP "--max-redirs <num>"
-Set maximum number of redirection-followings allowed. If \fI-L, --location\fP
-is used, this option can be used to prevent curl from following redirections
-\&"in absurdum". By default, the limit is set to 50 redirections. Set this
-option to -1 to make it limitless.
+(HTTP) Set maximum number of redirection-followings allowed. When \fI-L, --location\fP is used,
+is used to prevent curl from following redirections \&"in absurdum". By
+default, the limit is set to 50 redirections. Set this option to -1 to make it
+unlimited.
 
 If this option is used several times, the last one will be used.
+.IP "-m, --max-time <time>"
+Maximum time in seconds that you allow the whole operation to take.  This is
+useful for preventing your batch jobs from hanging for hours due to slow
+networks or links going down.  Since 7.32.0, this option accepts decimal
+values, but the actual timeout will decrease in accuracy as the specified
+timeout increases in decimal precision.
+
+If this option is used several times, the last one will be used.
+
+See also \fI--connect-timeout\fP. 
 .IP "--metalink"
 This option can tell curl to parse and process a given URI as Metalink file
 (both version 3 and 4 (RFC 5854) are supported) and make use of the mirrors
@@ -1125,21 +1130,48 @@ not stored in the local file system.
 
 Example to use a remote Metalink file:
 
-\fBcurl\fP --metalink http://www.example.com/example.metalink
+ curl --metalink http://www.example.com/example.metalink
+
+To use a Metalink file in the local file system, use FILE protocol (file://):
+
+ curl --metalink file://example.metalink
+
+Please note that if FILE protocol is disabled, there is no way to use a local
+Metalink file at the time of this writing. Also note that if \fI--metalink\fP and
+\fI-i, --include\fP are used together, --include will be ignored. This is because
+including headers in the response will break Metalink parser and if the
+headers are included in the file described in Metalink file, hash check will
+fail.
+
 
-To use a Metalink file in the local file system, use FILE protocol
-(file://):
+\fI--metalink\fP requires that the underlying libcurl was built to support metalink. Added in 7.27.0. 
+.IP "--negotiate"
+(HTTP) Enables Negotiate (SPNEGO) authentication.
+
+This option requires a library built with GSS-API or SSPI support. Use
+\fI-V, --version\fP to see if your curl supports GSS-API/SSPI or SPNEGO.
+
+When using this option, you must also provide a fake \fI-u, --user\fP option to activate
+the authentication code properly. Sending a '-u :' is enough as the user name
+and password from the \fI-u, --user\fP option aren't actually used.
+
+If this option is used several times, only the first one is used.
+
+See also \fI--basic\fP and \fI--ntlm\fP and \fI--anyauth\fP and \fI--proxy-negotiate\fP. 
+.IP "--netrc-file <filemame>"
+This option is similar to \fI-n, --netrc\fP, except that you provide the path (absolute
+or relative) to the netrc file that Curl should use.  You can only specify one
+netrc file per invocation. If several \fI--netrc-file\fP options are provided,
+the last one will be used.
 
-\fBcurl\fP --metalink file://example.metalink
+It will abide by \fI--netrc-optional\fP if specified.
 
-Please note that if FILE protocol is disabled, there is no way to use
-a local Metalink file at the time of this writing. Also note that if
-\fI--metalink\fP and \fI--include\fP are used together, \fI--include\fP will be
-ignored. This is because including headers in the response will break
-Metalink parser and if the headers are included in the file described
-in Metalink file, hash check will fail.
+This option overrides \fI-n, --netrc\fP. Added in 7.21.5. 
+.IP "--netrc-optional"
+Very similar to \fI-n, --netrc\fP, but this option makes the .netrc usage \fBoptional\fP
+and not mandatory as the \fI-n, --netrc\fP option does.
 
-(Added in 7.27.0, if built against the libmetalink library.)
+See also \fI--netrc-file\fP. This option overrides \fI-n, --netrc\fP. 
 .IP "-n, --netrc"
 Makes curl scan the \fI.netrc\fP (\fI_netrc\fP on Windows) file in the user's
 home directory for login name and password. This is typically used for FTP on
@@ -1154,6 +1186,27 @@ to FTP to the machine host.domain.com with user name \&'myself' and password
 \&'secret' should look similar to:
 
 .B "machine host.domain.com login myself password secret"
+.IP "-:, --next"
+Tells curl to use a separate operation for the following URL and associated
+options. This allows you to send several URL requests, each with their own
+specific options, for example, such as different user names or custom requests
+for each.
+
+\fI-:, --next\fP will reset all local options and only global ones will have their
+values survive over to the operation following the \fI-:, --next\fP instruction. Global
+options include \fI-v, --verbose\fP and \fI--fail-early\fP.
+
+For example, you can do both a GET and a POST in a single command line:
+
+ curl www1.example.com --next -d postthis www2.example.com
+
+Added in 7.36.0. 
+.IP "--no-alpn"
+(HTTPS) Disable the ALPN TLS extension. ALPN is enabled by default if libcurl was built
+with an SSL library that supports ALPN. ALPN is used by a libcurl that supports
+HTTP/2 to negotiate HTTP/2 support with the server during https sessions.
+
+See also \fI--no-npn\fP and \fI--http2\fP. \fI--no-alpn\fP requires that the underlying libcurl was built to support TLS. Added in 7.36.0. 
 .IP "-N, --no-buffer"
 Disables the buffering of the output stream. In normal work situations, curl
 will use a standard buffered output stream that will have the effect that it
@@ -1161,100 +1214,77 @@ will output the data in chunks, not necessarily exactly when the data arrives.
 Using this option will disable that buffering.
 
 Note that this is the negated option name documented. You can thus use
-\fI--buffer\fP to enforce the buffering.
-.IP "--netrc-file"
-This option is similar to \fI--netrc\fP, except that you provide the path
-(absolute or relative) to the netrc file that Curl should use.
-You can only specify one netrc file per invocation. If several
-\fI--netrc-file\fP options are provided, only the \fBlast one\fP will be used.
-(Added in 7.21.5)
-
-This option overrides any use of \fI--netrc\fP as they are mutually exclusive.
-It will also abide by \fI--netrc-optional\fP if specified.
-
-.IP "--netrc-optional"
-Very similar to \fI--netrc\fP, but this option makes the .netrc usage
-\fBoptional\fP and not mandatory as the \fI--netrc\fP option does.
-
-.IP "--negotiate"
-(HTTP) Enables Negotiate (SPNEGO) authentication.
-
-If you want to enable Negotiate (SPNEGO) for proxy authentication, then use
-\fI--proxy-negotiate\fP.
-
-This option requires a library built with GSS-API or SSPI support. Use \fI-V,
---version\fP to see if your curl supports GSS-API/SSPI and SPNEGO.
-
-When using this option, you must also provide a fake \fI-u, --user\fP option to
-activate the authentication code properly. Sending a '-u :' is enough as the
-user name and password from the \fI-u\fP option aren't actually used.
-
-If this option is used several times, only the first one is used.
+--buffer to enforce the buffering.
 .IP "--no-keepalive"
-Disables the use of keepalive messages on the TCP connection, as by default
-curl enables them.
+Disables the use of keepalive messages on the TCP connection. curl otherwis
+enables them by default.
 
 Note that this is the negated option name documented. You can thus use
-\fI--keepalive\fP to enforce keepalive.
+--keepalive to enforce keepalive.
+.IP "--no-npn"
+(HTTPS) Disable the NPN TLS extension. NPN is enabled by default if libcurl was built
+with an SSL library that supports NPN. NPN is used by a libcurl that supports
+HTTP/2 to negotiate HTTP/2 support with the server during https sessions.
+
+See also \fI--no-alpn\fP and \fI--http2\fP. \fI--no-npn\fP requires that the underlying libcurl was built to support TLS. Added in 7.36.0. 
 .IP "--no-sessionid"
-(SSL) Disable curl's use of SSL session-ID caching.  By default all transfers
-are done using the cache. Note that while nothing should ever get hurt by
+(TLS) Disable curl's use of SSL session-ID caching.  By default all transfers are
+done using the cache. Note that while nothing should ever get hurt by
 attempting to reuse SSL session-IDs, there seem to be broken SSL
 implementations in the wild that may require you to disable this in order for
-you to succeed. (Added in 7.16.0)
+you to succeed.
 
 Note that this is the negated option name documented. You can thus use
-\fI--sessionid\fP to enforce session-ID caching.
+--sessionid to enforce session-ID caching.
+
+Added in 7.16.0. 
 .IP "--noproxy <no-proxy-list>"
 Comma-separated list of hosts which do not use a proxy, if one is specified.
 The only wildcard is a single * character, which matches all hosts, and
 effectively disables the proxy. Each name in this list is matched as either
 a domain which contains the hostname, or the hostname itself. For example,
 local.com would match local.com, local.com:80, and www.local.com, but not
-www.notlocal.com.  (Added in 7.19.4).
-.IP "--connect-to <host:port:connect-to-host:connect-to-port>"
-For a request to the given "host:port" pair, connect to
-"connect-to-host:connect-to-port" instead.
-This is suitable to direct the request at a specific server, e.g. at a specific
-cluster node in a cluster of servers.
-This option is only used to establish the network connection. It does NOT
-affect the hostname/port that is used for TLS/SSL (e.g. SNI, certificate
-verification) or for the application protocols.
-"host" and "port" may be the empty string, meaning "any host/port".
-"connect-to-host" and "connect-to-port" may also be the empty string,
-meaning "use the request's original host/port".
-This option can be used many times to add many connect rules.
-(Added in 7.49.0).
+www.notlocal.com.
+
+Added in 7.19.4. 
+.IP "--ntlm-wb"
+(HTTP) Enables NTLM much in the style \fI--ntlm\fP does, but hand over the authentication
+to the separate binary ntlmauth application that is executed when needed.
+
+See also \fI--ntlm\fP and \fI--proxy-ntlm\fP. 
 .IP "--ntlm"
-(HTTP) Enables NTLM authentication. The NTLM authentication method was
-designed by Microsoft and is used by IIS web servers. It is a proprietary
-protocol, reverse-engineered by clever people and implemented in curl based
-on their efforts. This kind of behavior should not be endorsed, you should
-encourage everyone who uses NTLM to switch to a public and documented
-authentication method instead, such as Digest.
+(HTTP) Enables NTLM authentication. The NTLM authentication method was designed by
+Microsoft and is used by IIS web servers. It is a proprietary protocol,
+reverse-engineered by clever people and implemented in curl based on their
+efforts. This kind of behavior should not be endorsed, you should encourage
+everyone who uses NTLM to switch to a public and documented authentication
+method instead, such as Digest.
 
 If you want to enable NTLM for your proxy authentication, then use
 \fI--proxy-ntlm\fP.
 
-This option requires a library built with SSL support. Use
-\fI-V, --version\fP to see if your curl supports NTLM.
-
 If this option is used several times, only the first one is used.
-.IP "--ntlm-wb"
-(HTTP) Enables NTLM much in the style \fI--ntlm\fP does, but hand over the
-authentication to the separate binary ntlmauth application that is executed
-when needed.
+
+See also \fI--proxy-ntlm\fP. \fI--ntlm\fP requires that the underlying libcurl was built to support TLS. This option overrides \fI--basic\fP and \fI--negotiated\fP and \fI--digest\fP and \fI--anyauth\fP. 
+.IP "--oauth2-bearer"
+(IMAP POP3 SMTP) Specify the Bearer Token for OAUTH 2.0 server authentication. The Bearer Token
+is used in conjunction with the user name which can be specified as part of
+the \fI--url\fP or \fI-u, --user\fP options.
+
+The Bearer Token and user name are formatted according to RFC 6750.
+
+If this option is used several times, the last one will be used.
 .IP "-o, --output <file>"
 Write output to <file> instead of stdout. If you are using {} or [] to fetch
 multiple documents, you can use '#' followed by a number in the <file>
 specifier. That variable will be replaced with the current string for the URL
 being fetched. Like in:
 
-  curl http://{one,two}.example.com -o "file_#1.txt"
+ curl http://{one,two}.example.com -o "file_#1.txt"
 
 or use several variables like:
 
-  curl http://{site,host}.host[1-5].com -o "#1_#2"
+ curl http://{site,host}.host[1-5].com -o "#1_#2"
 
 You may use this option as many times as the number of URLs you have. For
 example, if you specify two URLs on the same command line, you can use it like
@@ -1271,33 +1301,65 @@ written as
 See also the \fI--create-dirs\fP option to create the local directories
 dynamically. Specifying the output as '-' (a single dash) will force the
 output to be done to stdout.
-.IP "-O, --remote-name"
-Write output to a local file named like the remote file we get. (Only the file
-part of the remote file is used, the path is cut off.)
 
-The file will be saved in the current working directory. If you want the file
-saved in a different directory, make sure you change the current working
-directory before invoking curl with this option.
+See also \fI-O, --remote-name\fP and \fI--remote-name-all\fP and \fI-J, --remote-header-name\fP. 
+.IP "--pass <phrase>"
+(SSH TLS) Passphrase for the private key
 
-The remote file name to use for saving is extracted from the given URL, nothing
-else, and if it already exists it will be overwritten. If you want the server
-to be able to choose the file name refer to \fI-J, --remote-header-name\fP
-which can be used in addition to this option. If the server chooses a file name
-and that name already exists it will not be overwritten.
+If this option is used several times, the last one will be used.
+.IP "--path-as-is"
+Tell curl to not handle sequences of /../ or /./ in the given URL
+path. Normally curl will squash or merge them according to standards but with
+this option set you tell it not to do that.
 
-There is no URL decoding done on the file name. If it has %20 or other URL
-encoded parts of the name, they will end up as-is as file name.
+Added in 7.42.0. 
+.IP "--pinnedpubkey <hashes>"
+(TLS) Tells curl to use the specified public key file (or hashes) to verify the
+peer. This can be a path to a file which contains a single public key in PEM
+or DER format, or any number of base64 encoded sha256 hashes preceded by
+\'sha256//\' and separated by \';\'
 
-You may use this option as many times as the number of URLs you have.
-.IP "--oauth2-bearer"
-(IMAP, POP3, SMTP)
-Specify the Bearer Token for OAUTH 2.0 server authentication. The Bearer Token
-is used in conjunction with the user name which can be specified as part of the
-\fI--url\fP or \fI-u, --user\fP options.
+When negotiating a TLS or SSL connection, the server sends a certificate
+indicating its identity. A public key is extracted from this certificate and
+if it does not exactly match the public key provided to this option, curl will
+abort the connection before sending or receiving any data.
 
-The Bearer Token and user name are formatted according to RFC 6750.
+PEM/DER support:
+  7.39.0: OpenSSL, GnuTLS and GSKit
+  7.43.0: NSS and wolfSSL/CyaSSL
+  7.47.0: mbedtls
+  7.49.0: PolarSSL
+sha256 support:
+  7.44.0: OpenSSL, GnuTLS, NSS and wolfSSL/CyaSSL.
+  7.47.0: mbedtls
+  7.49.0: PolarSSL
+Other SSL backends not supported.
 
 If this option is used several times, the last one will be used.
+.IP "--post301"
+(HTTP) Tells curl to respect RFC 7230/6.4.2 and not convert POST requests into GET
+requests when following a 301 redirection. The non-RFC behaviour is ubiquitous
+in web browsers, so curl does the conversion by default to maintain
+consistency. However, a server may require a POST to remain a POST after such
+a redirection. This option is meaningful only when using \fI-L, --location\fP.
+
+See also \fI--post302\fP and \fI--post303\fP and \fI-L, --location\fP. Added in 7.17.1. 
+.IP "--post302"
+(HTTP) Tells curl to respect RFC 7230/6.4.2 and not convert POST requests into GET
+requests when following a 302 redirection. The non-RFC behaviour is ubiquitous
+in web browsers, so curl does the conversion by default to maintain
+consistency. However, a server may require a POST to remain a POST after such
+a redirection. This option is meaningful only when using \fI-L, --location\fP.
+
+See also \fI--post301\fP and \fI--post303\fP and \fI-L, --location\fP. Added in 7.19.1. 
+.IP "--post303"
+(HTTP) Tells curl to respect RFC 7230/6.4.2 and not convert POST requests into GET
+requests when following a 303 redirection. The non-RFC behaviour is ubiquitous
+in web browsers, so curl does the conversion by default to maintain
+consistency. However, a server may require a POST to remain a POST after such
+a redirection. This option is meaningful only when using \fI-L, --location\fP.
+
+See also \fI--post302\fP and \fI--post301\fP and \fI-L, --location\fP. Added in 7.26.0. 
 .IP "--preproxy [protocol://]host[:port]"
 Use the specified proxy before connecting to the ordinary proxy. Hence pre
 proxy. A pre proxy must be a SOCKS speaking proxy.
@@ -1316,89 +1378,46 @@ or pass in a colon with %3a.
 
 If this option is used several times, the last one will be used.
 
-Added in 7.52.0.
-.IP "--proxy-header <header>"
-(HTTP) Extra header to include in the request when sending HTTP to a
-proxy. You may specify any number of extra headers. This is the equivalent
-option to \fI-H, --header\fP but is for proxy communication only like in
-CONNECT requests when you want a separate header sent to the proxy to what is
-sent to the actual remote host.
+Added in 7.52.0. 
+.IP "-#, --progress-bar"
+Make curl display transfer progress as a simple progress bar instead of the
+standard, more informational, meter.
 
-curl will make sure that each header you add/replace is sent with the proper
-end-of-line marker, you should thus \fBnot\fP add that as a part of the header
-content: do not add newlines or carriage returns, they will only mess things
-up for you.
+This progress bar draws a single line of '#' characters across the screen and
+shows a percentage if the transfer size is known. For transfers without a
+known size, it will instead output one '#' character for every 1024 bytes
+transferred.
+.IP "--proto-default <protocol>"
+Tells curl to use \fIprotocol\fP for any URL missing a scheme name.
 
-Headers specified with this option will not be included in requests that curl
-knows will not be sent to a proxy.
+Example:
 
-This option can be used multiple times to add/replace/remove multiple headers.
+ curl --proto-default https ftp.mozilla.org
 
-(Added in 7.37.0)
-.IP "-p, --proxytunnel"
-When an HTTP proxy is used (\fI-x, --proxy\fP), this option will cause non-HTTP
-protocols to attempt to tunnel through the proxy instead of merely using it to
-do HTTP-like operations. The tunnel approach is made with the HTTP proxy
-CONNECT request and requires that the proxy allows direct connect to the
-remote port number curl wants to tunnel through to.
-.IP "-P, --ftp-port <address>"
-(FTP) Reverses the default initiator/listener roles when connecting with
-FTP. This switch makes curl use active mode. In practice, curl then tells the
-server to connect back to the client's specified address and port, while
-passive mode asks the server to setup an IP address and port for it to connect
-to. <address> should be one of:
-.RS
-.IP interface
-i.e "eth0" to specify which interface's IP address you want to use (Unix only)
-.IP "IP address"
-i.e "192.168.10.1" to specify the exact IP address
-.IP "host name"
-i.e "my.host.domain" to specify the machine
-.IP "-"
-make curl pick the same IP address that is already used for the control
-connection
-.RE
-.IP
-If this option is used several times, the last one will be used. Disable the
-use of PORT with \fI--ftp-pasv\fP. Disable the attempt to use the EPRT command
-instead of PORT by using \fI--disable-eprt\fP. EPRT is really PORT++.
+An unknown or unsupported protocol causes error
+\fICURLE_UNSUPPORTED_PROTOCOL\fP (1).
 
-Starting in 7.19.5, you can append \&":[start]-[end]\&" to the right of the
-address, to tell curl what TCP port range to use. That means you specify a
-port range, from a lower to a higher number. A single number works as well,
-but do note that it increases the risk of failure since the port may not be
-available.
-.IP "--pass <phrase>"
-(SSL/SSH) Passphrase for the private key
+This option does not change the default proxy protocol (http).
 
-If this option is used several times, the last one will be used.
-.IP "--path-as-is"
-Tell curl to not handle sequences of /../ or /./ in the given URL
-path. Normally curl will squash or merge them according to standards but with
-this option set you tell it not to do that.
+Without this option curl would make a guess based on the host, see \fI--url\fP for
+details.
 
-(Added in 7.42.0)
-.IP "--post301"
-(HTTP) Tells curl to respect RFC 7230/6.4.2 and not convert POST requests
-into GET requests when following a 301 redirection. The non-RFC behaviour is
-ubiquitous in web browsers, so curl does the conversion by default to maintain
-consistency. However, a server may require a POST to remain a POST after such
-a redirection. This option is meaningful only when using \fI-L, --location\fP
-(Added in 7.17.1)
-.IP "--post302"
-(HTTP) Tells curl to respect RFC 7230/6.4.3 and not convert POST requests
-into GET requests when following a 302 redirection. The non-RFC behaviour is
-ubiquitous in web browsers, so curl does the conversion by default to maintain
-consistency. However, a server may require a POST to remain a POST after such
-a redirection. This option is meaningful only when using \fI-L, --location\fP
-(Added in 7.19.1)
-.IP "--post303"
-(HTTP) Tells curl to respect RFC 7230/6.4.4 and not convert POST requests
-into GET requests when following a 303 redirection. The non-RFC behaviour is
-ubiquitous in web browsers, so curl does the conversion by default to maintain
-consistency. However, a server may require a POST to remain a POST after such
-a redirection. This option is meaningful only when using \fI-L, --location\fP
-(Added in 7.26.0)
+Added in 7.45.0. 
+.IP "--proto-redir <protocols>"
+Tells curl to limit what protocols it may use on redirect. Protocols denied by
+\fI--proto\fP are not overridden by this option. See --proto for how protocols are
+represented.
+
+Example, allow only HTTP and HTTPS on redirect:
+
+ curl --proto-redir -all,http,https http://example.com
+
+By default curl will allow all protocols on redirect except several disabled
+for security reasons: Since 7.19.4 FILE and SCP are disabled, and since 7.40.0
+SMB and SMBS are also disabled. Specifying \fIall\fP or \fI+all\fP enables all
+protocols on redirect, including those disabled for security.
+
+Added in 7.20.2. 
 .IP "--proto <protocols>"
 Tells curl to limit what protocols it may use in the transfer. Protocols are
 evaluated left to right, are comma separated, and are each a protocol name or
@@ -1421,16 +1440,16 @@ list.
 For example:
 .RS
 .TP 15
-.B --proto -ftps
+.B \fI--proto\fP -ftps
 uses the default protocols, but disables ftps
 .TP
-.B  --proto -all,https,+http
+.B  \fI--proto\fP -all,https,+http
 only enables http and https
 .TP
-.B --proto =http,https
+.B \fI--proto\fP =http,https
 also only enables http and https
 .RE
-.IP
+
 Unknown protocols produce a warning. This allows scripts to safely rely on
 being able to disable potentially dangerous protocols, without relying upon
 support for that protocol being built into curl to avoid an error.
@@ -1438,122 +1457,169 @@ support for that protocol being built into curl to avoid an error.
 This option can be used multiple times, in which case the effect is the same
 as concatenating the protocols into one instance of the option.
 
-(Added in 7.20.2)
-.IP "--proto-default <protocol>"
-Tells curl to use \fIprotocol\fP for any URL missing a scheme name.
-
-Example:
-
-.RS
-.IP "--proto-default https ftp.mozilla.org"
-https://ftp.mozilla.org
-.RE
+See also \fI--proto-redir\fP and \fI--proto-default\fP. Added in 7.20.2. 
+.IP "--proxy-anyauth"
+Tells curl to pick a suitable authentication method when communicating with
+the given HTTP proxy. This might cause an extra request/response round-trip.
 
-An unknown or unsupported protocol causes error
-\fICURLE_UNSUPPORTED_PROTOCOL\fP.
+See also \fI-x, --proxy\fP and \fI--proxy-basic\fP and \fI--proxy-digest\fP. Added in 7.13.2. 
+.IP "--proxy-basic"
+Tells curl to use HTTP Basic authentication when communicating with the given
+proxy. Use \fI--basic\fP for enabling HTTP Basic with a remote host. Basic is the
+default authentication method curl uses with proxies.
 
-This option does not change the default proxy protocol (http).
+See also \fI-x, --proxy\fP and \fI--proxy-anyauth\fP and \fI--proxy-digest\fP. 
+.IP "--proxy-cacert <file>"
+Same as \fI--cacert\fP but used in HTTPS proxy context.
 
-Without this option curl would make a guess based on the host, see \fI--url\fP
-for details.
+See also \fI--proxy-capath\fP and \fI--cacert\fP and \fI--capath\fP and \fI-x, --proxy\fP. Added in 7.52.0. 
+.IP "--proxy-capath <dir>"
+Same as \fI--capath\fP but used in HTTPS proxy context.
 
-(Added in 7.45.0)
-.IP "--proto-redir <protocols>"
-Tells curl to limit what protocols it may use on redirect. Protocols denied by
---proto are not overridden by this option. See \fI--proto\fP for how protocols
-are represented.
+See also \fI--proxy-cacert\fP and \fI-x, --proxy\fP and \fI--capath\fP. Added in 7.52.0. 
+.IP "--proxy-cert-type <type>"
+Same as \fI--cert-type\fP but used in HTTPS proxy context.
 
-Example:
+Added in 7.52.0. 
+.IP "--proxy-cert <cert[:passwd]>"
+Same as \fI-E, --cert\fP but used in HTTPS proxy context.
 
-.RS
-.IP "--proto-redir -all,http,https"
-Allow only HTTP and HTTPS on redirect.
-.RE
+Added in 7.52.0. 
+.IP "--proxy-ciphers <list>"
+Same as \fI--ciphers\fP but used in HTTPS proxy context.
 
-By default curl will allow all protocols on redirect except several disabled
-for security reasons: Since 7.19.4 FILE and SCP are disabled, and since 7.40.0
-SMB and SMBS are also disabled. Specifying \fIall\fP or \fI+all\fP enables all
-protocols on redirect, including those disabled for security.
+Added in 7.52.0. 
+.IP "--proxy-crlfile <file>"
+Same as \fI--crlfile\fP but used in HTTPS proxy context.
 
-(Added in 7.20.2)
-.IP "--proxy-anyauth"
-Tells curl to pick a suitable authentication method when communicating with
-the given proxy. This might cause an extra request/response round-trip. (Added
-in 7.13.2)
-.IP "--proxy-basic"
-Tells curl to use HTTP Basic authentication when communicating with the given
-proxy. Use \fI--basic\fP for enabling HTTP Basic with a remote host. Basic is
-the default authentication method curl uses with proxies.
+Added in 7.52.0. 
 .IP "--proxy-digest"
 Tells curl to use HTTP Digest authentication when communicating with the given
 proxy. Use \fI--digest\fP for enabling HTTP Digest with a remote host.
-.IP "--proxy-cacert <CA certificate>"
-(SSL) Same as --cacert but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-capath <CA certificate directory>"
-(SSL) Same as --capath but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-cert <certificate[:password]>"
-(SSL) Same as \fI--cert\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-cert-type <type>"
-(SSL) Same as \fI--cert-type\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-ciphers <list of ciphers>"
-(SSL) Same as \fI--ciphers\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-crlfile <file>"
-(HTTPS) Same as \fI--crlfile\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
+
+See also \fI-x, --proxy\fP and \fI--proxy-anyauth\fP and \fI--proxy-basic\fP. 
+.IP "--proxy-header <header>"
+(HTTP) Extra header to include in the request when sending HTTP to a proxy. You may
+specify any number of extra headers. This is the equivalent option to \fI-H, --header\fP
+but is for proxy communication only like in CONNECT requests when you want a
+separate header sent to the proxy to what is sent to the actual remote host.
+
+curl will make sure that each header you add/replace is sent with the proper
+end-of-line marker, you should thus \fBnot\fP add that as a part of the header
+content: do not add newlines or carriage returns, they will only mess things
+up for you.
+
+Headers specified with this option will not be included in requests that curl
+knows will not be sent to a proxy.
+
+This option can be used multiple times to add/replace/remove multiple headers.
+
+Added in 7.37.0. 
 .IP "--proxy-insecure"
-(SSL) Same as \fI--insecure\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-key <key>"
-(SSL) Same as \fI--key\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
+Same as \fI-k, --insecure\fP but used in HTTPS proxy context.
+
+Added in 7.52.0. 
 .IP "--proxy-key-type <type>"
-(SSL) Same as \fI--key-type\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
+Same as \fI--key-type\fP but used in HTTPS proxy context.
+
+Added in 7.52.0. 
+.IP "--proxy-key <key>"
+Same as \fI--key\fP but used in HTTPS proxy context.
 .IP "--proxy-negotiate"
 Tells curl to use HTTP Negotiate (SPNEGO) authentication when communicating
 with the given proxy. Use \fI--negotiate\fP for enabling HTTP Negotiate (SPNEGO)
-with a remote host. (Added in 7.17.1)
+with a remote host.
+
+See also \fI--proxy-anyauth\fP and \fI--proxy-basic\fP. Added in 7.17.1. 
 .IP "--proxy-ntlm"
 Tells curl to use HTTP NTLM authentication when communicating with the given
 proxy. Use \fI--ntlm\fP for enabling NTLM with a remote host.
+
+See also \fI--proxy-negotiate\fP and \fI--proxy-anyauth\fP. 
 .IP "--proxy-pass <phrase>"
-(SSL) Same as \fI--pass\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-service-name <servicename>"
+Same as \fI\fI--pass\fP\fP but used in HTTPS proxy context.
+
+Added in 7.52.0. 
+.IP "--proxy-service-name <name>"
 This option allows you to change the service name for proxy negotiation.
 
-Examples: --proxy-negotiate proxy-name \fI--proxy-service-name\fP sockd would use
-sockd/proxy-name.  (Added in 7.43.0).
+Added in 7.43.0. 
 .IP "--proxy-ssl-allow-beast"
-(SSL) Same as \fI--ssl-allow-beast\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-tlsauthtype <authtype>"
+Same as \fI--ssl-allow-beast\fP but used in HTTPS proxy context.
+
+Added in 7.52.0. 
+.IP "--proxy-tlsauthtype <type>"
 Same as \fI--tlsauthtype\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-tlspassword <password>"
+
+Added in 7.52.0. 
+.IP "--proxy-tlspassword <string>"
 Same as \fI--tlspassword\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy-tlsuser <user>"
+
+Added in 7.52.0. 
+.IP "--proxy-tlsuser.d <name>"
 Same as \fI--tlsuser\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
+
+Added in 7.52.0. 
 .IP "--proxy-tlsv1"
-(SSL) Same as \fI--tlsv1\fP but used in HTTPS proxy context.
-(Added in 7.52.0)
-.IP "--proxy1.0 <proxyhost[:port]>"
+Same as \fI-1, --tlsv1\fP but used in HTTPS proxy context.
+
+Added in 7.52.0. 
+.IP "-U, --proxy-user <user:password>"
+Specify the user name and password to use for proxy authentication.
+
+If you use a Windows SSPI-enabled curl binary and do either Negotiate or NTLM
+authentication then you can tell curl to select the user name and password
+from your environment by specifying a single colon with this option: "-U :".
+
+If this option is used several times, the last one will be used.
+.IP "-x, --proxy [protocol://]host[:port]"
+Use the specified proxy.
+
+The proxy string can be specified with a protocol:// prefix to specify
+alternative proxy protocols. Use socks4://, socks4a://, socks5:// or
+socks5h:// to request the specific SOCKS version to be used. No protocol
+specified, http:// and all others will be treated as HTTP proxies. (The
+protocol support was added in curl 7.21.7)
+
+If the port number is not specified in the proxy string, it is assumed to be
+1080.
+
+This option overrides existing environment variables that set the proxy to
+use. If there's an environment variable setting a proxy, you can set proxy to
+\&"" to override it.
+
+All operations that are performed over an HTTP proxy will transparently be
+converted to HTTP. It means that certain protocol specific operations might
+not be available. This is not the case if you can tunnel through the proxy, as
+one with the \fI-p, --proxytunnel\fP option.
+
+User and password that might be provided in the proxy string are URL decoded
+by curl. This allows you to pass in special characters such as @ by using %40
+or pass in a colon with %3a.
+
+The proxy host can be specified the exact same way as the proxy environment
+variables, including the protocol prefix (http://) and the embedded user +
+password.
+
+If this option is used several times, the last one will be used.
+.IP "--proxy1.0 <host[:port]>"
 Use the specified HTTP 1.0 proxy. If the port number is not specified, it is
 assumed at port 1080.
 
-The only difference between this and the HTTP proxy option (\fI-x, --proxy\fP),
-is that attempts to use CONNECT through the proxy will specify an HTTP 1.0
-protocol instead of the default HTTP 1.1.
+The only difference between this and the HTTP proxy option \fI-x, --proxy\fP, is that
+attempts to use CONNECT through the proxy will specify an HTTP 1.0 protocol
+instead of the default HTTP 1.1.
+.IP "-p, --proxytunnel"
+When an HTTP proxy is used \fI-x, --proxy\fP, this option will cause non-HTTP protocols
+to attempt to tunnel through the proxy instead of merely using it to do
+HTTP-like operations. The tunnel approach is made with the HTTP proxy CONNECT
+request and requires that the proxy allows direct connect to the remote port
+number curl wants to tunnel through to.
+
+See also \fI-x, --proxy\fP. 
 .IP "--pubkey <key>"
-(SSH) Public key file name. Allows you to provide your public key in this
-separate file.
+(SFTP SCP) Public key file name. Allows you to provide your public key in this separate
+file.
 
 If this option is used several times, the last one will be used.
 
@@ -1561,24 +1627,23 @@ If this option is used several times, the last one will be used.
 private key file, so passing this option is generally not required. Note that
 this public key extraction requires libcurl to be linked against a copy of
 libssh2 1.2.8 or higher that is itself linked against OpenSSL.)
-.IP "-q, --disable"
-If used as the first parameter on the command line, the \fIcurlrc\fP config
-file will not be read and used. See the \fI-K, --config\fP for details on the
-default config file search path.
-.IP "-Q, --quote <command>"
-(FTP/SFTP) Send an arbitrary command to the remote FTP or SFTP server. Quote
-commands are sent BEFORE the transfer takes place (just after the initial PWD
-command in an FTP transfer, to be exact). To make commands take place after a
-successful transfer, prefix them with a dash '-'.  To make commands be sent
-after curl has changed the working directory, just before the transfer
-command(s), prefix the command with a '+' (this is only supported for
-FTP). You may specify any number of commands. If the server returns failure
-for one of the commands, the entire operation will be aborted. You must send
-syntactically correct FTP commands as RFC 959 defines to FTP servers, or one
-of the commands listed below to SFTP servers.  This option can be used
-multiple times. When speaking to an FTP server, prefix the command with an
-asterisk (*) to make curl continue even if the command fails as by default
-curl will stop at first failure.
+.IP "-Q, --quote"
+(FTP SFTP) 
+Send an arbitrary command to the remote FTP or SFTP server. Quote commands are
+sent BEFORE the transfer takes place (just after the initial PWD command in an
+FTP transfer, to be exact). To make commands take place after a successful
+transfer, prefix them with a dash '-'.  To make commands be sent after curl
+has changed the working directory, just before the transfer command(s), prefix
+the command with a '+' (this is only supported for FTP). You may specify any
+number of commands.
+
+If the server returns failure for one of the commands, the entire operation
+will be aborted. You must send syntactically correct FTP commands as RFC 959
+defines to FTP servers, or one of the commands listed below to SFTP servers.
+
+This option can be used multiple times. When speaking to an FTP server, prefix
+the command with an asterisk (*) to make curl continue even if the command
+fails as by default curl will stop at first failure.
 
 SFTP is a binary protocol. Unlike for FTP, curl interprets SFTP quote commands
 itself before sending them to the server.  File names may be quoted
@@ -1614,10 +1679,13 @@ operand, provided it is empty.
 .IP "symlink source_file target_file"
 See ln.
 .RE
+.IP "--random-file <file>"
+Specify the path name to file containing what will be considered as random
+data. The data may be used to seed the random engine for SSL connections.  See
+also the \fI--egd-file\fP option.
 .IP "-r, --range <range>"
-(HTTP/FTP/SFTP/FILE) Retrieve a byte range (i.e a partial document) from a
-HTTP/1.1, FTP or SFTP server or a local FILE. Ranges can be specified
-in a number of ways.
+(HTTP FTP SFTP FILE) Retrieve a byte range (i.e a partial document) from a HTTP/1.1, FTP or SFTP
+server or a local FILE. Ranges can be specified in a number of ways.
 .RS
 .TP 10
 .B 0-499
@@ -1656,22 +1724,100 @@ FTP and SFTP range downloads only support the simple 'start-stop' syntax
 FTP command SIZE.
 
 If this option is used several times, the last one will be used.
-.IP "-R, --remote-time"
-When used, this will make curl attempt to figure out the timestamp of the
-remote file, and if that is available make the local file get that same
-timestamp.
-.IP "--random-file <file>"
-(SSL) Specify the path name to file containing what will be considered as
-random data. The data is used to seed the random engine for SSL connections.
-See also the \fI--egd-file\fP option.
 .IP "--raw"
 (HTTP) When used, it disables all internal HTTP decoding of content or transfer
-encodings and instead makes them passed on unaltered, raw. (Added in 7.16.2)
+encodings and instead makes them passed on unaltered, raw.
+
+Added in 7.16.2. 
+.IP "-e, --referer <URL>"
+(HTTP) Sends the "Referrer Page" information to the HTTP server. This can also be set
+with the \fI-H, --header\fP flag of course.  When used with \fI-L, --location\fP you can append
+";auto" to the \fI-e, --referer\fP URL to make curl automatically set the previous URL
+when it follows a Location: header. The \&";auto" string can be used alone,
+even if you don't set an initial \fI-e, --referer\fP.
+
+If this option is used several times, the last one will be used.
+
+See also \fI-A, --user-agent\fP and \fI-H, --header\fP. 
+.IP "-J, --remote-header-name"
+(HTTP) This option tells the \fI-O, --remote-name\fP option to use the server-specified
+Content-Disposition filename instead of extracting a filename from the URL.
+
+If the server specifies a file name and a file with that name already exists
+in the current working directory it will not be overwritten and an error will
+occur. If the server doesn't specify a file name then this option has no
+effect.
+
+There's no attempt to decode %-sequences (yet) in the provided file name, so
+this option may provide you with rather unexpected file names.
+
+\fBWARNING\fP: Exercise judicious use of this option, especially on Windows. A
+rogue server could send you the name of a DLL or other file that could possibly
+be loaded automatically by Windows or some third party software.
 .IP "--remote-name-all"
 This option changes the default action for all given URLs to be dealt with as
-if \fI-O, --remote-name\fP were used for each one. So if you want to disable
-that for a specific URL after \fI--remote-name-all\fP has been used, you must
-use "-o -" or \fI--no-remote-name\fP. (Added in 7.19.0)
+if \fI-O, --remote-name\fP were used for each one. So if you want to disable that for a
+specific URL after \fI--remote-name-all\fP has been used, you must use "-o -" or
+--no-remote-name.
+
+Added in 7.19.0. 
+.IP "-O, --remote-name"
+Write output to a local file named like the remote file we get. (Only the file
+part of the remote file is used, the path is cut off.)
+
+The file will be saved in the current working directory. If you want the file
+saved in a different directory, make sure you change the current working
+directory before invoking curl with this option.
+
+The remote file name to use for saving is extracted from the given URL,
+nothing else, and if it already exists it will be overwritten. If you want the
+server to be able to choose the file name refer to \fI-J, --remote-header-name\fP which
+can be used in addition to this option. If the server chooses a file name and
+that name already exists it will not be overwritten.
+
+There is no URL decoding done on the file name. If it has %20 or other URL
+encoded parts of the name, they will end up as-is as file name.
+
+You may use this option as many times as the number of URLs you have.
+.IP "-R, --remote-time"
+When used, this will make curl attempt to figure out the timestamp of the
+remote file, and if that is available make the local file get that same
+timestamp.
+.IP "-X, --request <command>"
+(HTTP) Specifies a custom request method to use when communicating with the
+HTTP server.  The specified request method will be used instead of the method
+otherwise used (which defaults to GET). Read the HTTP 1.1 specification for
+details and explanations. Common additional HTTP requests include PUT and
+DELETE, but related technologies like WebDAV offers PROPFIND, COPY, MOVE and
+more.
+
+Normally you don't need this option. All sorts of GET, HEAD, POST and PUT
+requests are rather invoked by using dedicated command line options.
+
+This option only changes the actual word used in the HTTP request, it does not
+alter the way curl behaves. So for example if you want to make a proper HEAD
+request, using -X HEAD will not suffice. You need to use the \fI-I, --head\fP option.
+
+The method string you set with \fI-X, --request\fP will be used for all requests, which
+if you for example use \fI-L, --location\fP may cause unintended side-effects when curl
+doesn't change request method according to the HTTP 30x response codes - and
+similar.
+
+(FTP)
+Specifies a custom FTP command to use instead of LIST when doing file lists
+with FTP.
+
+(POP3)
+Specifies a custom POP3 command to use instead of LIST or RETR. (Added in
+7.26.0)
+
+(IMAP)
+Specifies a custom IMAP command to use instead of LIST. (Added in 7.30.0)
+
+(SMTP)
+Specifies a custom SMTP command to use instead of HELP or VRFY. (Added in 7.34.0)
+
+If this option is used several times, the last one will be used.
 .IP "--resolve <host:port:address>"
 Provide a custom address for a specific host and port pair. Using this, you
 can make the curl requests(s) use a specified address and prevent the
@@ -1681,272 +1827,382 @@ the number used for the specific protocol the host will be used for. It means
 you need several entries if you want to provide address for the same host but
 different ports.
 
-The provided address set by this option will be used even if \fI-4, --ipv4\fP
-or \fI-6, --ipv6\fP is set to make curl use another IP version.
+The provided address set by this option will be used even if \fI-4, --ipv4\fP or \fI-6, --ipv6\fP
+is set to make curl use another IP version.
 
 This option can be used many times to add many host names to resolve.
 
-(Added in 7.21.3)
-.IP "--retry <num>"
-If a transient error is returned when curl tries to perform a transfer, it
-will retry this number of times before giving up. Setting the number to 0
-makes curl do no retries (which is the default). Transient error means either:
-a timeout, an FTP 4xx response code or an HTTP 5xx response code.
-
-When curl is about to retry a transfer, it will first wait one second and then
-for all forthcoming retries it will double the waiting time until it reaches
-10 minutes which then will be the delay between the rest of the retries.  By
-using \fI--retry-delay\fP you disable this exponential backoff algorithm. See
-also \fI--retry-max-time\fP to limit the total time allowed for
-retries. (Added in 7.12.3)
-
-If this option is used several times, the last one will be used.
+Added in 7.21.3. 
 .IP "--retry-connrefused"
 In addition to the other conditions, consider ECONNREFUSED as a transient
-error too for \fI--retry\fP. This option is used together with
-\fI--retry\fP. (Added in 7.52.0)
+error too for \fI--retry\fP. This option is used together with --retry.
+
+Added in 7.52.0. 
 .IP "--retry-delay <seconds>"
 Make curl sleep this amount of time before each retry when a transfer has
 failed with a transient error (it changes the default backoff time algorithm
 between retries). This option is only interesting if \fI--retry\fP is also
 used. Setting this delay to zero will make curl use the default backoff time.
-(Added in 7.12.3)
 
 If this option is used several times, the last one will be used.
+
+Added in 7.12.3. 
 .IP "--retry-max-time <seconds>"
 The retry timer is reset before the first transfer attempt. Retries will be
-done as usual (see \fI--retry\fP) as long as the timer hasn't reached this
-given limit. Notice that if the timer hasn't reached the limit, the request
-will be made and while performing, it may take longer than this given time
-period. To limit a single request\'s maximum time, use \fI-m, --max-time\fP.
-Set this option to zero to not timeout retries. (Added in 7.12.3)
+done as usual (see \fI--retry\fP) as long as the timer hasn't reached this given
+limit. Notice that if the timer hasn't reached the limit, the request will be
+made and while performing, it may take longer than this given time period. To
+limit a single request\'s maximum time, use \fI-m, --max-time\fP.  Set this option to
+zero to not timeout retries.
 
 If this option is used several times, the last one will be used.
-.IP "-s, --silent"
-Silent or quiet mode. Don't show progress meter or error messages.  Makes Curl
-mute. It will still output the data you ask for, potentially even to the
-terminal/stdout unless you redirect it.
+
+Added in 7.12.3. 
+.IP "--retry <num>"
+If a transient error is returned when curl tries to perform a transfer, it
+will retry this number of times before giving up. Setting the number to 0
+makes curl do no retries (which is the default). Transient error means either:
+a timeout, an FTP 4xx response code or an HTTP 5xx response code.
+
+When curl is about to retry a transfer, it will first wait one second and then
+for all forthcoming retries it will double the waiting time until it reaches
+10 minutes which then will be the delay between the rest of the retries.  By
+using \fI--retry-delay\fP you disable this exponential backoff algorithm. See also
+\fI--retry-max-time\fP to limit the total time allowed for retries.
+
+If this option is used several times, the last one will be used.
+
+Added in 7.12.3. 
 .IP "--sasl-ir"
 Enable initial response in SASL authentication.
-(Added in 7.31.0)
-.IP "--service-name <servicename>"
+
+Added in 7.31.0. 
+.IP "--service-name <name>"
 This option allows you to change the service name for SPNEGO.
 
-Examples: --negotiate \fI--service-name\fP sockd would use
-sockd/server-name.  (Added in 7.43.0).
-.IP "-S, --show-error"
-When used with \fI-s\fP it makes curl show an error message if it fails.
-.IP "--ssl"
-(FTP, POP3, IMAP, SMTP) Try to use SSL/TLS for the connection.  Reverts to a
-non-secure connection if the server doesn't support SSL/TLS.  See also
-\fI--ftp-ssl-control\fP and \fI--ssl-reqd\fP for different levels of
-encryption required. (Added in 7.20.0)
+Examples: \fI--negotiate\fP \fI--service-name\fP sockd would use sockd/server-name.
 
-This option was formerly known as \fI--ftp-ssl\fP (Added in 7.11.0). That
-option name can still be used but will be removed in a future version.
-.IP "--ssl-reqd"
-(FTP, POP3, IMAP, SMTP) Require SSL/TLS for the connection.  Terminates the
-connection if the server doesn't support SSL/TLS. (Added in 7.20.0)
+Added in 7.43.0. 
+.IP "-S, --show-error"
+When used with \fI-s, --silent\fP, it makes curl show an error message if it fails.
+.IP "-s, --silent"
+Silent or quiet mode. Don't show progress meter or error messages.  Makes Curl
+mute. It will still output the data you ask for, potentially even to the
+terminal/stdout unless you redirect it.
 
-This option was formerly known as \fI--ftp-ssl-reqd\fP.
-.IP "--ssl-allow-beast"
-(SSL) This option tells curl to not work around a security flaw in the SSL3
-and TLS1.0 protocols known as BEAST.  If this option isn't used, the SSL layer
-may use workarounds known to cause interoperability problems with some older
-SSL implementations. WARNING: this option loosens the SSL security, and by
-using this flag you ask for exactly that.  (Added in 7.25.0)
-.IP "--ssl-no-revoke"
-(WinSSL) This option tells curl to disable certificate revocation checks.
-WARNING: this option loosens the SSL security, and by using this flag you ask
-for exactly that.  (Added in 7.44.0)
+See also \fI-v, --verbose\fP and \fI--stderr\fP. 
 .IP "--socks4 <host[:port]>"
 Use the specified SOCKS4 proxy. If the port number is not specified, it is
-assumed at port 1080. (Added in 7.15.2)
+assumed at port 1080.
 
-This option overrides any previous use of \fI-x, --proxy\fP, as they are
-mutually exclusive.
+This option overrides any previous use of \fI-x, --proxy\fP, as they are mutually
+exclusive.
 
 Since 7.21.7, this option is superfluous since you can specify a socks4 proxy
 with \fI-x, --proxy\fP using a socks4:// protocol prefix.
 
 If this option is used several times, the last one will be used.
+
+Added in 7.15.2. 
 .IP "--socks4a <host[:port]>"
 Use the specified SOCKS4a proxy. If the port number is not specified, it is
-assumed at port 1080. (Added in 7.18.0)
+assumed at port 1080.
 
-This option overrides any previous use of \fI-x, --proxy\fP, as they are
-mutually exclusive.
+This option overrides any previous use of \fI-x, --proxy\fP, as they are mutually
+exclusive.
 
 Since 7.21.7, this option is superfluous since you can specify a socks4a proxy
 with \fI-x, --proxy\fP using a socks4a:// protocol prefix.
 
 If this option is used several times, the last one will be used.
+
+Added in 7.18.0. 
+.IP "--socks5-gssapi-nec"
+As part of the GSS-API negotiation a protection mode is negotiated. RFC 1961
+says in section 4.3/4.4 it should be protected, but the NEC reference
+implementation does not.  The option \fI--socks5-gssapi-nec\fP allows the
+unprotected exchange of the protection mode negotiation.
+
+Added in 7.19.4. 
+.IP "--socks5-gssapi-service <name>"
+The default service name for a socks server is rcmd/server-fqdn. This option
+allows you to change it.
+
+Examples: \fI--socks5\fP proxy-name \fI--socks5-gssapi-service\fP sockd would use
+sockd/proxy-name \fI--socks5\fP proxy-name \fI--socks5-gssapi-service\fP sockd/real-name
+would use sockd/real-name for cases where the proxy-name does not match the
+principal name.
+
+Added in 7.19.4. 
 .IP "--socks5-hostname <host[:port]>"
 Use the specified SOCKS5 proxy (and let the proxy resolve the host name). If
-the port number is not specified, it is assumed at port 1080. (Added in
-7.18.0)
+the port number is not specified, it is assumed at port 1080.
 
-This option overrides any previous use of \fI-x, --proxy\fP, as they are
-mutually exclusive.
+This option overrides any previous use of \fI-x, --proxy\fP, as they are mutually
+exclusive.
 
 Since 7.21.7, this option is superfluous since you can specify a socks5
 hostname proxy with \fI-x, --proxy\fP using a socks5h:// protocol prefix.
 
-If this option is used several times, the last one will be used. (This option
-was previously wrongly documented and used as --socks without the number
-appended.)
+If this option is used several times, the last one will be used.
+
+Added in 7.18.0. 
 .IP "--socks5 <host[:port]>"
 Use the specified SOCKS5 proxy - but resolve the host name locally. If the
 port number is not specified, it is assumed at port 1080.
 
-This option overrides any previous use of \fI-x, --proxy\fP, as they are
-mutually exclusive.
+This option overrides any previous use of \fI-x, --proxy\fP, as they are mutually
+exclusive.
 
 Since 7.21.7, this option is superfluous since you can specify a socks5 proxy
 with \fI-x, --proxy\fP using a socks5:// protocol prefix.
 
-If this option is used several times, the last one will be used. (This option
-was previously wrongly documented and used as --socks without the number
-appended.)
+If this option is used several times, the last one will be used.
 
 This option (as well as \fI--socks4\fP) does not work with IPV6, FTPS or LDAP.
-.IP "--socks5-gssapi-service <servicename>"
-The default service name for a socks server is rcmd/server-fqdn. This option
-allows you to change it.
 
-Examples: --socks5 proxy-name \fI--socks5-gssapi-service\fP sockd would use
-sockd/proxy-name --socks5 proxy-name \fI--socks5-gssapi-service\fP
-sockd/real-name would use sockd/real-name for cases where the proxy-name does
-not match the principal name.  (Added in 7.19.4).
-.IP "--socks5-gssapi-nec"
-As part of the GSS-API negotiation a protection mode is negotiated. RFC 1961
-says in section 4.3/4.4 it should be protected, but the NEC reference
-implementation does not.  The option \fI--socks5-gssapi-nec\fP allows the
-unprotected exchange of the protection mode negotiation. (Added in 7.19.4).
-.IP "--stderr <file>"
-Redirect all writes to stderr to the specified file instead. If the file name
-is a plain '-', it is instead written to stdout.
+Added in 7.18.0. 
+.IP "-Y, --speed-limit <speed>"
+If a download is slower than this given speed (in bytes per second) for
+speed-time seconds it gets aborted. speed-time is set with \fI-y, --speed-time\fP and is
+30 if not set.
 
 If this option is used several times, the last one will be used.
-.IP "-t, --telnet-option <OPT=val>"
-Pass options to the telnet protocol. Supported options are:
+.IP "-y, --speed-time <seconds>"
+If a download is slower than speed-limit bytes per second during a speed-time
+period, the download gets aborted. If speed-time is used, the default
+speed-limit will be 1 unless set with \fI-Y, --speed-limit\fP.
 
-TTYPE=<term> Sets the terminal type.
+This option controls transfers and thus will not affect slow connects etc. If
+this is a concern for you, try the \fI--connect-timeout\fP option.
 
-XDISPLOC=<X display> Sets the X display location.
+If this option is used several times, the last one will be used.
+.IP "--ssl-allow-beast"
+This option tells curl to not work around a security flaw in the SSL3 and
+TLS1.0 protocols known as BEAST.  If this option isn't used, the SSL layer may
+use workarounds known to cause interoperability problems with some older SSL
+implementations. WARNING: this option loosens the SSL security, and by using
+this flag you ask for exactly that.
 
-NEW_ENV=<var,val> Sets an environment variable.
-.IP "-T, --upload-file <file>"
-This transfers the specified local file to the remote URL. If there is no file
-part in the specified URL, Curl will append the local file name. NOTE that you
-must use a trailing / on the last directory to really prove to Curl that there
-is no file name or curl will think that your last directory name is the remote
-file name to use. That will most likely cause the upload operation to fail. If
-this is used on an HTTP(S) server, the PUT command will be used.
+Added in 7.25.0. 
+.IP "--ssl-no-revoke"
+(WinSSL) This option tells curl to disable certificate revocation checks.
+WARNING: this option loosens the SSL security, and by using this flag you ask
+for exactly that.
 
-Use the file name "-" (a single dash) to use stdin instead of a given file.
-Alternately, the file name "." (a single period) may be specified instead
-of "-" to use stdin in non-blocking mode to allow reading server output
-while stdin is being uploaded.
+Added in 7.44.0. 
+.IP "--ssl-reqd"
+(FTP IMAP POP3 SMTP) Require SSL/TLS for the connection.  Terminates the connection if the server
+doesn't support SSL/TLS.
 
-You can specify one -T for each URL on the command line. Each -T + URL pair
-specifies what to upload and to where. curl also supports "globbing" of the -T
-argument, meaning that you can upload multiple files to a single URL by using
-the same URL globbing style supported in the URL, like this:
+This option was formerly known as --ftp-ssl-reqd.
 
-curl -T "{file1,file2}" http://www.example.com
+Added in 7.20.0. 
+.IP "--ssl"
+(FTP IMAP POP3 SMTP) 
+Try to use SSL/TLS for the connection.  Reverts to a non-secure connection if
+the server doesn't support SSL/TLS.  See also \fI--ftp-ssl-control\fP and \fI--ssl-reqd\fP
+for different levels of encryption required.
 
-or even
+This option was formerly known as --ftp-ssl (Added in 7.11.0). That option
+name can still be used but will be removed in a future version.
 
-curl -T "img[1-1000].png" ftp://ftp.example.com/upload/
+Added in 7.20.0. 
+.IP "-2, --sslv2"
+(SSL) Forces curl to use SSL version 2 when negotiating with a remote SSL
+server. Sometimes curl is built without SSLv2 support. SSLv2 is widely
+considered insecure (see RFC 6176).
 
-When uploading to an SMTP server: the uploaded data is assumed to be RFC 5322
-formatted. It has to feature the necessary set of headers and mail body
-formatted correctly by the user as curl will not transcode nor encode it
-further in any way.
+See also \fI--http1.1\fP and \fI--http2\fP. \fI-2, --sslv2\fP requires that the underlying libcurl was built to support TLS. This option overrides \fI-3, --sslv3\fP and \fI-1, --tlsv1\fP and \fI--tlsv1.1\fP and \fI--tlsv1.2\fP. 
+.IP "-3, --sslv3"
+(SSL) Forces curl to use SSL version 3 when negotiating with a remote SSL
+server. Sometimes curl is built without SSLv3 support. SSLv3 is widely
+considered insecure (see RFC 7568).
+
+See also \fI--http1.1\fP and \fI--http2\fP. \fI-3, --sslv3\fP requires that the underlying libcurl was built to support TLS. This option overrides \fI-2, --sslv2\fP and \fI-1, --tlsv1\fP and \fI--tlsv1.1\fP and \fI--tlsv1.2\fP. 
+.IP "--stderr"
+Redirect all writes to stderr to the specified file instead. If the file name
+is a plain '-', it is instead written to stdout.
+
+If this option is used several times, the last one will be used.
+
+See also \fI-v, --verbose\fP and \fI-s, --silent\fP. 
+.IP "--tcp-fastopen"
+Enable use of TCP Fast Open (RFC7413).
+
+Added in 7.49.0. 
 .IP "--tcp-nodelay"
 Turn on the TCP_NODELAY option. See the \fIcurl_easy_setopt(3)\fP man page for
-details about this option. (Added in 7.11.2)
-.IP "--tcp-fastopen"
-Enable use of TCP Fast Open (RFC7413). (Added in 7.49.0)
+details about this option.
+
+Since 7.50.2, curl sets this option by default and you need to explictitly
+switch it off if you don't want it on.
+
+Added in 7.11.2. 
+.IP "-t, --telnet-option <opt=val>"
+Pass options to the telnet protocol. Supported options are:
+
+TTYPE=<term> Sets the terminal type.
+
+XDISPLOC=<X display> Sets the X display location.
+
+NEW_ENV=<var,val> Sets an environment variable.
 .IP "--tftp-blksize <value>"
-(TFTP) Set TFTP BLKSIZE option (must be >512). This is the block size that
-curl will try to use when transferring data to or from a TFTP server. By
-default 512 bytes will be used.
+(TFTP) Set TFTP BLKSIZE option (must be >512). This is the block size that curl will
+try to use when transferring data to or from a TFTP server. By default 512
+bytes will be used.
 
 If this option is used several times, the last one will be used.
 
-(Added in 7.20.0)
+Added in 7.20.0. 
 .IP "--tftp-no-options"
 (TFTP) Tells curl not to send TFTP options requests.
 
 This option improves interop with some legacy servers that do not acknowledge
-or properly implement TFTP options. When this option is used
-\fI--tftp-blksize\fP is ignored.
+or properly implement TFTP options. When this option is used \fI--tftp-blksize\fP is
+ignored.
+
+Added in 7.48.0. 
+.IP "-z, --time-cond <time>"
+(HTTP FTP) Request a file that has been modified later than the given time and date, or
+one that has been modified before that time. The <date expression> can be all
+sorts of date strings or if it doesn't match any internal ones, it is taken as
+a filename and tries to get the modification date (mtime) from <file>
+instead. See the \fIcurl_getdate(3)\fP man pages for date expression details.
+
+Start the date expression with a dash (-) to make it request for a document
+that is older than the given date/time, default is a document that is newer
+than the specified date/time.
 
-(Added in 7.48.0)
-.IP "--tlsauthtype <authtype>"
+If this option is used several times, the last one will be used.
+.IP "--tlsauthtype <type>"
 Set TLS authentication type. Currently, the only supported option is "SRP",
-for TLS-SRP (RFC 5054). If \fI--tlsuser\fP and \fI--tlspassword\fP are
-specified but \fI--tlsauthtype\fP is not, then this option defaults to "SRP".
-(Added in 7.21.4)
-.IP "--tlspassword <password>"
+for TLS-SRP (RFC 5054). If \fI--tlsuser\fP and \fI--tlspassword\fP are specified but
+\fI--tlsauthtype\fP is not, then this option defaults to "SRP".
+
+Added in 7.21.4. 
+.IP "--tlspassword"
 Set password for use with the TLS authentication method specified with
-\fI--tlsauthtype\fP. Requires that \fI--tlsuser\fP also be set.  (Added in
-7.21.4)
-.IP "--tlsuser <user>"
+\fI--tlsauthtype\fP. Requires that \fI--tlsuser\fP also be set.
+
+Added in 7.21.4. 
+.IP "--tlsuser <name>"
 Set username for use with the TLS authentication method specified with
-\fI--tlsauthtype\fP. Requires that \fI--tlspassword\fP also be set.  (Added in
-7.21.4)
+\fI--tlsauthtype\fP. Requires that \fI--tlspassword\fP also is set.
+
+Added in 7.21.4. 
 .IP "--tlsv1.0"
-(SSL)
-Forces curl to use TLS version 1.0 when negotiating with a remote TLS server.
-(Added in 7.34.0)
+(TLS) Forces curl to use TLS version 1.0 when connecting to a remote TLS server.
+
+Added in 7.34.0. 
 .IP "--tlsv1.1"
-(SSL)
-Forces curl to use TLS version 1.1 when negotiating with a remote TLS server.
-(Added in 7.34.0)
+(TLS) Forces curl to use TLS version 1.1 when connecting to a remote TLS server.
+
+Added in 7.34.0. 
 .IP "--tlsv1.2"
-(SSL)
-Forces curl to use TLS version 1.2 when negotiating with a remote TLS server.
-(Added in 7.34.0)
+(TLS) Forces curl to use TLS version 1.2 when connecting to a remote TLS server.
+
+Added in 7.34.0. 
 .IP "--tlsv1.3"
-(SSL)
-Forces curl to use TLS version 1.3 when negotiating with a remote TLS server.
-(Added in 7.52.0)
-.IP "--tr-encoding"
-(HTTP) Request a compressed Transfer-Encoding response using one of the
-algorithms curl supports, and uncompress the data while receiving it.
+(TLS) Forces curl to use TLS version 1.3 when connecting to a remote TLS server.
 
-(Added in 7.21.6)
-.IP "--trace <file>"
-Enables a full trace dump of all incoming and outgoing data, including
-descriptive information, to the given output file. Use "-" as filename to have
-the output sent to stdout. Use "%" as filename to have the output sent to
-stderr.
+Note that TLS 1.3 is only supported by a subset of TLS backends. At the time
+of writing this, those are BoringSSL and NSS only.
 
-This option overrides previous uses of \fI-v, --verbose\fP or
-\fI--trace-ascii\fP.
+Added in 7.52.0. 
+.IP "-1, --tlsv1"
+(SSL) Forces curl to use TLS version 1.x when negotiating with a remote TLS server.
+You can use options \fI\fI-1, --tlsv1\fP.0\fP, \fI--tlsv1.1\fP, \fI--tlsv1.2\fP, and \fI--tlsv1.3\fP to control
+the TLS version more precisely (if the SSL backend in use supports such a
+level of control).
 
-If this option is used several times, the last one will be used.
+See also \fI--http1.1\fP and \fI--http2\fP. \fI-1, --tlsv1\fP requires that the underlying libcurl was built to support TLS. This option overrides \fI--tlsv1.1\fP and \fI--tlsv1.2\fP. 
+.IP "--tr-encoding"
+(HTTP) Request a compressed Transfer-Encoding response using one of the algorithms
+curl supports, and uncompress the data while receiving it.
+
+Added in 7.21.6. 
 .IP "--trace-ascii <file>"
 Enables a full trace dump of all incoming and outgoing data, including
 descriptive information, to the given output file. Use "-" as filename to have
 the output sent to stdout.
 
-This is very similar to \fI--trace\fP, but leaves out the hex part and only
-shows the ASCII part of the dump. It makes smaller output that might be easier
-to read for untrained humans.
-
-This option overrides previous uses of \fI-v, --verbose\fP or \fI--trace\fP.
+This is very similar to \fI--trace\fP, but leaves out the hex part and only shows
+the ASCII part of the dump. It makes smaller output that might be easier to
+read for untrained humans.
 
 If this option is used several times, the last one will be used.
+
+This option overrides \fI--trace\fP and \fI-v, --verbose\fP. 
 .IP "--trace-time"
 Prepends a time stamp to each trace or verbose line that curl displays.
-(Added in 7.14.0)
+
+Added in 7.14.0. 
+.IP "--trace <file>"
+Enables a full trace dump of all incoming and outgoing data, including
+descriptive information, to the given output file. Use "-" as filename to have
+the output sent to stdout. Use "%" as filename to have the output sent to
+stderr.
+
+If this option is used several times, the last one will be used.
+
+This option overrides \fI-v, --verbose\fP and \fI--trace-ascii\fP. 
 .IP "--unix-socket <path>"
-(HTTP) Connect through this Unix domain socket, instead of using the
-network. (Added in 7.40.0)
+(HTTP) Connect through this Unix domain socket, instead of using the network.
+
+Added in 7.40.0. 
+.IP "-T, --upload-file <file>"
+This transfers the specified local file to the remote URL. If there is no file
+part in the specified URL, curl will append the local file name. NOTE that you
+must use a trailing / on the last directory to really prove to Curl that there
+is no file name or curl will think that your last directory name is the remote
+file name to use. That will most likely cause the upload operation to fail. If
+this is used on an HTTP(S) server, the PUT command will be used.
+
+Use the file name "-" (a single dash) to use stdin instead of a given file.
+Alternately, the file name "." (a single period) may be specified instead
+of "-" to use stdin in non-blocking mode to allow reading server output
+while stdin is being uploaded.
+
+You can specify one \fI-T, --upload-file\fP for each URL on the command line. Each
+\fI-T, --upload-file\fP + URL pair specifies what to upload and to where. curl also
+supports "globbing" of the \fI-T, --upload-file\fP argument, meaning that you can upload
+multiple files to a single URL by using the same URL globbing style supported
+in the URL, like this:
+
+ curl --upload-file "{file1,file2}" http://www.example.com
+
+or even
+
+ curl -T "img[1-1000].png" ftp://ftp.example.com/upload/
+
+When uploading to an SMTP server: the uploaded data is assumed to be RFC 5322
+formatted. It has to feature the necessary set of headers and mail body
+formatted correctly by the user as curl will not transcode nor encode it
+further in any way.
+.IP "--url <url>"
+Specify a URL to fetch. This option is mostly handy when you want to specify
+URL(s) in a config file.
+
+If the given URL is missing a scheme name (such as "http://" or "ftp://" etc)
+then curl will make a guess based on the host. If the outermost sub-domain
+name matches DICT, FTP, IMAP, LDAP, POP3 or SMTP then that protocol will be
+used, otherwise HTTP will be used. Since 7.45.0 guessing can be disabled by
+setting a default protocol, see \fI--proto-default\fP for details.
+
+This option may be used any number of times. To control where this URL is
+written, use the \fI-o, --output\fP or the \fI-O, --remote-name\fP options.
+.IP "-B, --use-ascii"
+(FTP LDAP) Enable ASCII transfer. For FTP, this can also be enforced by using an URL that
+ends with ";type=A". This option causes data sent to stdout to be in text mode
+for win32 systems.
+.IP "-A, --user-agent <name>"
+(HTTP) 
+Specify the User-Agent string to send to the HTTP server. To encode blanks in
+the string, surround the string with single quote marks. This can also be set
+with the \fI-H, --header\fP option of course.
+
+If this option is used several times, the last one will be used.
 .IP "-u, --user <user:password>"
 Specify the user name and password to use for server authentication. Overrides
 \fI-n, --netrc\fP and \fI--netrc-optional\fP.
@@ -1976,42 +2232,77 @@ the user name and password from your environment by specifying a single colon
 with this option: "-u :".
 
 If this option is used several times, the last one will be used.
-.IP "-U, --proxy-user <user:password>"
-Specify the user name and password to use for proxy authentication.
-
-If you use a Windows SSPI-enabled curl binary and do either Negotiate or NTLM
-authentication then you can tell curl to select the user name and password
-from your environment by specifying a single colon with this option: "-U :".
-
-If this option is used several times, the last one will be used.
-.IP "--url <URL>"
-Specify a URL to fetch. This option is mostly handy when you want to specify
-URL(s) in a config file.
-
-If the given URL is missing a scheme name (such as "http://" or "ftp://" etc)
-then curl will make a guess based on the host. If the outermost sub-domain name
-matches DICT, FTP, IMAP, LDAP, POP3 or SMTP then that protocol will be used,
-otherwise HTTP will be used. Since 7.45.0 guessing can be disabled by setting a
-default protocol, see \fI--proto-default\fP for details.
-
-This option may be used any number of times. To control where this URL is
-written, use the \fI-o, --output\fP or the \fI-O, --remote-name\fP options.
 .IP "-v, --verbose"
-Be more verbose/talkative during the operation. Useful for debugging and
-seeing what's going on "under the hood". A line starting with '>' means
-"header data" sent by curl, '<' means "header data" received by curl that is
-hidden in normal cases, and a line starting with '*' means additional info
-provided by curl.
+Makes curl verbose during the operation. Useful for debugging and seeing
+what's going on "under the hood". A line starting with '>' means "header data"
+sent by curl, '<' means "header data" received by curl that is hidden in
+normal cases, and a line starting with '*' means additional info provided by
+curl.
 
-Note that if you only want HTTP headers in the output, \fI-i, --include\fP
-might be the option you're looking for.
+If you only want HTTP headers in the output, \fI-i, --include\fP might be the option
+you're looking for.
 
 If you think this option still doesn't give you enough details, consider using
 \fI--trace\fP or \fI--trace-ascii\fP instead.
 
-This option overrides previous uses of \fI--trace-ascii\fP or \fI--trace\fP.
+Use \fI-s, --silent\fP to make curl really quiet.
 
-Use \fI-s, --silent\fP to make curl quiet.
+See also \fI-i, --include\fP. This option overrides \fI--trace\fP and \fI--trace-ascii\fP. 
+.IP "-V, --version"
+Displays information about curl and the libcurl version it uses.
+
+The first line includes the full version of curl, libcurl and other 3rd party
+libraries linked with the executable.
+
+The second line (starts with "Protocols:") shows all protocols that libcurl
+reports to support.
+
+The third line (starts with "Features:") shows specific features libcurl
+reports to offer. Available features include:
+.RS
+.IP "IPv6"
+You can use IPv6 with this.
+.IP "krb4"
+Krb4 for FTP is supported.
+.IP "SSL"
+SSL versions of various protocols are supported, such as HTTPS, FTPS, POP3S
+and so on.
+.IP "libz"
+Automatic decompression of compressed files over HTTP is supported.
+.IP "NTLM"
+NTLM authentication is supported.
+.IP "Debug"
+This curl uses a libcurl built with Debug. This enables more error-tracking
+and memory debugging etc. For curl-developers only!
+.IP "AsynchDNS"
+This curl uses asynchronous name resolves. Asynchronous name resolves can be
+done using either the c-ares or the threaded resolver backends.
+.IP "SPNEGO"
+SPNEGO authentication is supported.
+.IP "Largefile"
+This curl supports transfers of large files, files larger than 2GB.
+.IP "IDN"
+This curl supports IDN - international domain names.
+.IP "GSS-API"
+GSS-API is supported.
+.IP "SSPI"
+SSPI is supported.
+.IP "TLS-SRP"
+SRP (Secure Remote Password) authentication is supported for TLS.
+.IP "HTTP2"
+HTTP/2 support has been built-in.
+.IP "UnixSockets"
+Unix sockets support is provided.
+.IP "HTTPS-proxy"
+This curl is built to support HTTPS proxy.
+.IP "Metalink"
+This curl supports Metalink (both version 3 and 4 (RFC 5854)), which
+describes mirrors and hashes.  curl will use mirrors for failover if
+there are errors (such as the file or server not being available).
+.IP "PSL"
+PSL is short for Public Suffix List and means that this curl has been built
+with knowledge about "public suffixes".
+.RE
 .IP "-w, --write-out <format>"
 Make curl display information on stdout after a completed transfer. The format
 is a string that may contain plain text mixed with any number of
@@ -2020,10 +2311,10 @@ curl read the format from a file with "@filename" and to tell curl to read the
 format from stdin you write "@-".
 
 The variables present in the output format will be substituted by the value or
-text that curl thinks fit, as described below. All variables are specified
-as %{variable_name} and to output a normal % you just write them as
-%%. You can output a newline by using \\n, a carriage return with \\r and a tab
-space with \\t.
+text that curl thinks fit, as described below. All variables are specified as
+%{variable_name} and to output a normal % you just write them as %%. You can
+output a newline by using \\n, a carriage return with \\r and a tab space with
+\\t.
 
 .B NOTE:
 The %-symbol is a special symbol in the win32-environment, where all
@@ -2037,8 +2328,8 @@ The Content-Type of the requested document, if there was any.
 .TP
 .B filename_effective
 The ultimate filename that curl writes out to. This is only meaningful if curl
-is told to write to a file with the \fI--remote-name\fP or \fI--output\fP
-option. It's most useful in combination with the \fI--remote-header-name\fP
+is told to write to a file with the \fI\fI-O, --remote-name\fP\fP or \fI\fI-o, --output\fP\fP
+option. It's most useful in combination with the \fI\fI-J, --remote-header-name\fP\fP
 option. (Added in 7.26.0)
 .TP
 .B ftp_entry_path
@@ -2146,171 +2437,23 @@ to follow location: headers.
 .RE
 .IP
 If this option is used several times, the last one will be used.
-.IP "-x, --proxy <[protocol://][user:password@]proxyhost[:port]>"
-Use the specified proxy.
-
-The proxy string can be specified with a protocol:// prefix to specify
-alternative proxy protocols. Use socks4://, socks4a://, socks5:// or
-socks5h:// to request the specific SOCKS version to be used. No protocol
-specified, http:// and all others will be treated as HTTP proxies. (The
-protocol support was added in curl 7.21.7)
-
-If the port number is not specified in the proxy string, it is assumed to be
-1080.
-
-This option overrides existing environment variables that set the proxy to
-use. If there's an environment variable setting a proxy, you can set proxy to
-\&"" to override it.
-
-All operations that are performed over an HTTP proxy will transparently be
-converted to HTTP. It means that certain protocol specific operations might
-not be available. This is not the case if you can tunnel through the proxy, as
-one with the \fI-p, --proxytunnel\fP option.
-
-User and password that might be provided in the proxy string are URL decoded
-by curl. This allows you to pass in special characters such as @ by using %40
-or pass in a colon with %3a.
-
-The proxy host can be specified the exact same way as the proxy environment
-variables, including the protocol prefix (http://) and the embedded user +
-password.
-
-If this option is used several times, the last one will be used.
-.IP "-X, --request <command>"
-(HTTP) Specifies a custom request method to use when communicating with the
-HTTP server.  The specified request method will be used instead of the method
-otherwise used (which defaults to GET). Read the HTTP 1.1 specification for
-details and explanations. Common additional HTTP requests include PUT and
-DELETE, but related technologies like WebDAV offers PROPFIND, COPY, MOVE and
-more.
-
-Normally you don't need this option. All sorts of GET, HEAD, POST and PUT
-requests are rather invoked by using dedicated command line options.
-
-This option only changes the actual word used in the HTTP request, it does not
-alter the way curl behaves. So for example if you want to make a proper HEAD
-request, using -X HEAD will not suffice. You need to use the \fI-I, --head\fP
-option.
-
-The method string you set with -X will be used for all requests, which if you
-for example use \fB-L, --location\fP may cause unintended side-effects when
-curl doesn't change request method according to the HTTP 30x response codes -
-and similar.
-
-(FTP)
-Specifies a custom FTP command to use instead of LIST when doing file lists
-with FTP.
-
-(POP3)
-Specifies a custom POP3 command to use instead of LIST or RETR. (Added in
-7.26.0)
-
-(IMAP)
-Specifies a custom IMAP command to use instead of LIST. (Added in 7.30.0)
-
-(SMTP)
-Specifies a custom SMTP command to use instead of HELP or VRFY. (Added in 7.34.0)
-
-If this option is used several times, the last one will be used.
 .IP "--xattr"
 When saving output to a file, this option tells curl to store certain file
 metadata in extended file attributes. Currently, the URL is stored in the
 xdg.origin.url attribute and, for HTTP, the content type is stored in
 the mime_type attribute. If the file system does not support extended
 attributes, a warning is issued.
-
-.IP "-y, --speed-time <time>"
-If a download is slower than speed-limit bytes per second during a speed-time
-period, the download gets aborted. If speed-time is used, the default
-speed-limit will be 1 unless set with \fI-Y\fP.
-
-This option controls transfers and thus will not affect slow connects etc. If
-this is a concern for you, try the \fI--connect-timeout\fP option.
-
-If this option is used several times, the last one will be used.
-.IP "-Y, --speed-limit <speed>"
-If a download is slower than this given speed (in bytes per second) for
-speed-time seconds it gets aborted. speed-time is set with \fI-y\fP and is 30
-if not set.
-
-If this option is used several times, the last one will be used.
-.IP "-z, --time-cond <date expression>|<file>"
-(HTTP/FTP) Request a file that has been modified later than the given time and
-date, or one that has been modified before that time. The <date expression>
-can be all sorts of date strings or if it doesn't match any internal ones, it
-is taken as a filename and tries to get the modification date (mtime) from
-<file> instead. See the \fIcurl_getdate(3)\fP man pages for date expression
-details.
-
-Start the date expression with a dash (-) to make it request for a document
-that is older than the given date/time, default is a document that is newer
-than the specified date/time.
-
-If this option is used several times, the last one will be used.
-.IP "-h, --help"
-Usage help. This lists all current command line options with a short
-description.
-.IP "-M, --manual"
-Manual. Display the huge help text.
-.IP "-V, --version"
-Displays information about curl and the libcurl version it uses.
-
-The first line includes the full version of curl, libcurl and other 3rd party
-libraries linked with the executable.
-
-The second line (starts with "Protocols:") shows all protocols that libcurl
-reports to support.
-
-The third line (starts with "Features:") shows specific features libcurl
-reports to offer. Available features include:
-.RS
-.IP "IPv6"
-You can use IPv6 with this.
-.IP "krb4"
-Krb4 for FTP is supported.
-.IP "SSL"
-SSL versions of various protocols are supported, such as HTTPS, FTPS, POP3S
-and so on.
-.IP "libz"
-Automatic decompression of compressed files over HTTP is supported.
-.IP "NTLM"
-NTLM authentication is supported.
-.IP "Debug"
-This curl uses a libcurl built with Debug. This enables more error-tracking
-and memory debugging etc. For curl-developers only!
-.IP "AsynchDNS"
-This curl uses asynchronous name resolves. Asynchronous name resolves can be
-done using either the c-ares or the threaded resolver backends.
-.IP "SPNEGO"
-SPNEGO authentication is supported.
-.IP "Largefile"
-This curl supports transfers of large files, files larger than 2GB.
-.IP "IDN"
-This curl supports IDN - international domain names.
-.IP "GSS-API"
-GSS-API is supported.
-.IP "SSPI"
-SSPI is supported.
-.IP "TLS-SRP"
-SRP (Secure Remote Password) authentication is supported for TLS.
-.IP "HTTP2"
-HTTP/2 support has been built-in.
-.IP "Metalink"
-This curl supports Metalink (both version 3 and 4 (RFC 5854)), which
-describes mirrors and hashes.  curl will use mirrors for failover if
-there are errors (such as the file or server not being available).
-.RE
 .SH FILES
 .I ~/.curlrc
 .RS
-Default config file, see \fI-K, --config\fP for details.
+Default config file, see \fI-K, \fI-K, --config\fP\fP for details.
 .SH ENVIRONMENT
 The environment variables can be specified in lower case or upper case. The
 lower case version has precedence. http_proxy is an exception as it is only
 available in lower case.
 
 Using an environment variable to set the proxy has the same effect as using
-the \fI--proxy\fP option.
+the \fI\fI-x, --proxy\fP\fP option.
 
 .IP "http_proxy [protocol://]<host>[:port]"
 Sets the proxy server to use for HTTP.
@@ -2334,13 +2477,13 @@ a supported one, the proxy will be treated as an HTTP proxy.
 
 The supported proxy protocol prefixes are as follows:
 .IP "socks4://"
-Makes it the equivalent of \fI--socks4\fP
+Makes it the equivalent of \fI\fI--socks4\fP\fP
 .IP "socks4a://"
-Makes it the equivalent of \fI--socks4a\fP
+Makes it the equivalent of \fI\fI--socks4a\fP\fP
 .IP "socks5://"
-Makes it the equivalent of \fI--socks5\fP
+Makes it the equivalent of \fI\fI--socks5\fP\fP
 .IP "socks5h://"
-Makes it the equivalent of \fI--socks5-hostname\fP
+Makes it the equivalent of \fI\fI--socks5-hostname\fP\fP
 .SH EXIT CODES
 There are a bunch of different error codes and their corresponding error
 messages that may appear during bad conditions. At the time of this writing,
@@ -2387,7 +2530,7 @@ FTP quote error. A quote command returned error from the server.
 .IP 22
 HTTP page not retrieved. The requested url was not found or returned another
 error with the HTTP error code being 400 or above. This return code only
-appears if \fI-f, --fail\fP is used.
+appears if \fI-f, \fI-f, --fail\fP\fP is used.
 .IP 23
 Write error. Curl couldn't write data to a local filesystem or similar.
 .IP 25