Don't restrict ourselves to a "max" fd when closing fds before exec()

when we have a way to get an actual list of all open fds from the OS.

Fixes issue #21618: The subprocess module would ignore fds that were
inherited by the calling process and already higher than POSIX resource
limits would otherwise allow.  On systems with a functioning /proc/self/fd
or /dev/fd interface the max is now ignored and all fds are closed.

1 files changed, 44 insertions, 43 deletions

diff --git a/Modules/_posixsubprocess.c b/Modules/_posixsubprocess.c
index 648a569ca7..8f5ce04362 100644
--- a/Modules/_posixsubprocess.c
+++ b/Modules/_posixsubprocess.c
@@ -44,10 +44,6 @@
 #define POSIX_CALL(call)   do { if ((call) == -1) goto error; } while (0)
 
 
-/* Maximum file descriptor, initialized on module load. */
-static long max_fd;
-
-
 /* Given the gc module call gc.enable() and return 0 on success. */
 static int
 _enable_gc(PyObject *gc_module)
@@ -166,14 +162,39 @@ make_inheritable(PyObject *py_fds_to_keep, int errpipe_write)
 }
 
 
-/* Close all file descriptors in the range start_fd inclusive to
- * end_fd exclusive except for those in py_fds_to_keep.  If the
- * range defined by [start_fd, end_fd) is large this will take a
- * long time as it calls close() on EVERY possible fd.
+/* Get the maximum file descriptor that could be opened by this process.
+ * This function is async signal safe for use between fork() and exec().
+ */
+static long
+safe_get_max_fd(void)
+{
+    long local_max_fd;
+#if defined(__NetBSD__)
+    local_max_fd = fcntl(0, F_MAXFD);
+    if (local_max_fd >= 0)
+        return local_max_fd;
+#endif
+#ifdef _SC_OPEN_MAX
+    local_max_fd = sysconf(_SC_OPEN_MAX);
+    if (local_max_fd == -1)
+#endif
+        local_max_fd = 256;  /* Matches legacy Lib/subprocess.py behavior. */
+    return local_max_fd;
+}
+
+
+/* Close all file descriptors in the range from start_fd and higher
+ * except for those in py_fds_to_keep.  If the range defined by
+ * [start_fd, safe_get_max_fd()) is large this will take a long
+ * time as it calls close() on EVERY possible fd.
+ *
+ * It isn't possible to know for sure what the max fd to go up to
+ * is for processes with the capability of raising their maximum.
  */
 static void
-_close_fds_by_brute_force(int start_fd, int end_fd, PyObject *py_fds_to_keep)
+_close_fds_by_brute_force(long start_fd, PyObject *py_fds_to_keep)
 {
+    long end_fd = safe_get_max_fd();
     Py_ssize_t num_fds_to_keep = PySequence_Length(py_fds_to_keep);
     Py_ssize_t keep_seq_idx;
     int fd_num;
@@ -229,16 +250,14 @@ struct linux_dirent64 {
  * it with some cpp #define magic to work on other OSes as well if you want.
  */
 static void
-_close_open_fd_range_safe(int start_fd, int end_fd, PyObject* py_fds_to_keep)
+_close_open_fds_safe(int start_fd, PyObject* py_fds_to_keep)
 {
     int fd_dir_fd;
-    if (start_fd >= end_fd)
-        return;
 
     fd_dir_fd = _Py_open(FD_DIR, O_RDONLY);
     if (fd_dir_fd == -1) {
         /* No way to get a list of open fds. */
-        _close_fds_by_brute_force(start_fd, end_fd, py_fds_to_keep);
+        _close_fds_by_brute_force(start_fd, py_fds_to_keep);
         return;
     } else {
         char buffer[sizeof(struct linux_dirent64)];
@@ -253,23 +272,23 @@ _close_open_fd_range_safe(int start_fd, int end_fd, PyObject* py_fds_to_keep)
                 entry = (struct linux_dirent64 *)(buffer + offset);
                 if ((fd = _pos_int_from_ascii(entry->d_name)) < 0)
                     continue;  /* Not a number. */
-                if (fd != fd_dir_fd && fd >= start_fd && fd < end_fd &&
+                if (fd != fd_dir_fd && fd >= start_fd &&
                     !_is_fd_in_sorted_fd_sequence(fd, py_fds_to_keep)) {
                     while (close(fd) < 0 && errno == EINTR);
                 }
             }
         }
-        close(fd_dir_fd);
+        while (close(fd_dir_fd) < 0 && errno == EINTR);
     }
 }
 
-#define _close_open_fd_range _close_open_fd_range_safe
+#define _close_open_fds _close_open_fds_safe
 
 #else  /* NOT (defined(__linux__) && defined(HAVE_SYS_SYSCALL_H)) */
 
 
-/* Close all open file descriptors in the range start_fd inclusive to end_fd
- * exclusive. Do not close any in the sorted py_fds_to_keep list.
+/* Close all open file descriptors from start_fd and higher.
+ * Do not close any in the sorted py_fds_to_keep list.
  *
  * This function violates the strict use of async signal safe functions. :(
  * It calls opendir(), readdir() and closedir().  Of these, the one most
@@ -282,17 +301,13 @@ _close_open_fd_range_safe(int start_fd, int end_fd, PyObject* py_fds_to_keep)
  *   http://womble.decadent.org.uk/readdir_r-advisory.html
  */
 static void
-_close_open_fd_range_maybe_unsafe(int start_fd, int end_fd,
-                                  PyObject* py_fds_to_keep)
+_close_open_fds_maybe_unsafe(long start_fd, PyObject* py_fds_to_keep)
 {
     DIR *proc_fd_dir;
 #ifndef HAVE_DIRFD
-    while (_is_fd_in_sorted_fd_sequence(start_fd, py_fds_to_keep) &&
-           (start_fd < end_fd)) {
+    while (_is_fd_in_sorted_fd_sequence(start_fd, py_fds_to_keep)) {
         ++start_fd;
     }
-    if (start_fd >= end_fd)
-        return;
     /* Close our lowest fd before we call opendir so that it is likely to
      * reuse that fd otherwise we might close opendir's file descriptor in
      * our loop.  This trick assumes that fd's are allocated on a lowest
@@ -300,8 +315,6 @@ _close_open_fd_range_maybe_unsafe(int start_fd, int end_fd,
     while (close(start_fd) < 0 && errno == EINTR);
     ++start_fd;
 #endif
-    if (start_fd >= end_fd)
-        return;
 
 #if defined(__FreeBSD__)
     if (!_is_fdescfs_mounted_on_dev_fd())
@@ -311,7 +324,7 @@ _close_open_fd_range_maybe_unsafe(int start_fd, int end_fd,
         proc_fd_dir = opendir(FD_DIR);
     if (!proc_fd_dir) {
         /* No way to get a list of open fds. */
-        _close_fds_by_brute_force(start_fd, end_fd, py_fds_to_keep);
+        _close_fds_by_brute_force(start_fd, py_fds_to_keep);
     } else {
         struct dirent *dir_entry;
 #ifdef HAVE_DIRFD
@@ -324,7 +337,7 @@ _close_open_fd_range_maybe_unsafe(int start_fd, int end_fd,
             int fd;
             if ((fd = _pos_int_from_ascii(dir_entry->d_name)) < 0)
                 continue;  /* Not a number. */
-            if (fd != fd_used_by_opendir && fd >= start_fd && fd < end_fd &&
+            if (fd != fd_used_by_opendir && fd >= start_fd &&
                 !_is_fd_in_sorted_fd_sequence(fd, py_fds_to_keep)) {
                 while (close(fd) < 0 && errno == EINTR);
             }
@@ -332,13 +345,13 @@ _close_open_fd_range_maybe_unsafe(int start_fd, int end_fd,
         }
         if (errno) {
             /* readdir error, revert behavior. Highly Unlikely. */
-            _close_fds_by_brute_force(start_fd, end_fd, py_fds_to_keep);
+            _close_fds_by_brute_force(start_fd, py_fds_to_keep);
         }
         closedir(proc_fd_dir);
     }
 }
 
-#define _close_open_fd_range _close_open_fd_range_maybe_unsafe
+#define _close_open_fds _close_open_fds_maybe_unsafe
 
 #endif  /* else NOT (defined(__linux__) && defined(HAVE_SYS_SYSCALL_H)) */
 
@@ -457,14 +470,8 @@ child_exec(char *const exec_array[],
 
     /* close FDs after executing preexec_fn, which might open FDs */
     if (close_fds) {
-        int local_max_fd = max_fd;
-#if defined(__NetBSD__)
-        local_max_fd = fcntl(0, F_MAXFD);
-        if (local_max_fd < 0)
-            local_max_fd = max_fd;
-#endif
         /* TODO HP-UX could use pstat_getproc() if anyone cares about it. */
-        _close_open_fd_range(3, local_max_fd, py_fds_to_keep);
+        _close_open_fds(3, py_fds_to_keep);
     }
 
     /* This loop matches the Lib/os.py _execvpe()'s PATH search when */
@@ -759,11 +766,5 @@ static struct PyModuleDef _posixsubprocessmodule = {
 PyMODINIT_FUNC
 PyInit__posixsubprocess(void)
 {
-#ifdef _SC_OPEN_MAX
-    max_fd = sysconf(_SC_OPEN_MAX);
-    if (max_fd == -1)
-#endif
-        max_fd = 256;  /* Matches Lib/subprocess.py */
-
     return PyModule_Create(&_posixsubprocessmodule);
 }