diff options
Diffstat (limited to 'plat/juno/juno_def.h')
| -rw-r--r-- | plat/juno/juno_def.h | 264 |
1 files changed, 23 insertions, 241 deletions
diff --git a/plat/juno/juno_def.h b/plat/juno/juno_def.h index 2134ee415..8fe3835fe 100644 --- a/plat/juno/juno_def.h +++ b/plat/juno/juno_def.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -31,263 +31,45 @@ #ifndef __JUNO_DEF_H__ #define __JUNO_DEF_H__ -/* Special value used to verify platform parameters from BL2 to BL3-1 */ -#define JUNO_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL /******************************************************************************* * Juno memory map related constants ******************************************************************************/ -#define FLASH_BASE 0x08000000 -#define FLASH_SIZE 0x04000000 - -/* Bypass offset from start of NOR flash */ -#define BL1_ROM_BYPASS_OFFSET 0x03EC0000 - -#ifndef TZROM_BASE -/* Use the bypass address */ -#define TZROM_BASE FLASH_BASE + BL1_ROM_BYPASS_OFFSET -#endif -/* Actual ROM size on Juno is 64 KB, but TBB requires at least 80 KB in debug - * mode. We can test TBB on Juno bypassing the ROM and using 128 KB of flash */ -#if TRUSTED_BOARD_BOOT -#define TZROM_SIZE 0x00020000 -#else -#define TZROM_SIZE 0x00010000 -#endif - -#define TZRAM_BASE 0x04001000 -#define TZRAM_SIZE 0x0003F000 - -#define PLAT_TRUSTED_SRAM_ID 0 -#define PLAT_DRAM_ID 1 - -#define MHU_SECURE_BASE 0x04000000 -#define MHU_SECURE_SIZE 0x00001000 - -#define MHU_PAYLOAD_CACHED 0 - -#define TRUSTED_MAILBOXES_BASE MHU_SECURE_BASE -#define TRUSTED_MAILBOX_SHIFT 4 - -#define EMMC_BASE 0x0c000000 -#define EMMC_SIZE 0x04000000 - -#define PSRAM_BASE 0x14000000 -#define PSRAM_SIZE 0x02000000 - -#define IOFPGA_BASE 0x1c000000 -#define IOFPGA_SIZE 0x03000000 - -#define NSROM_BASE 0x1f000000 -#define NSROM_SIZE 0x00001000 - -/* Following covers Columbus Peripherals excluding NSROM and NSRAM */ -#define DEVICE0_BASE 0x20000000 -#define DEVICE0_SIZE 0x0e000000 -#define MHU_BASE 0x2b1f0000 - -#define NSRAM_BASE 0x2e000000 -#define NSRAM_SIZE 0x00008000 - -/* Following covers Juno Peripherals and PCIe expansion area */ -#define DEVICE1_BASE 0x40000000 -#define DEVICE1_SIZE 0x40000000 -#define PCIE_CONTROL_BASE 0x7ff20000 - -#define DRAM_BASE 0x80000000 -#define DRAM_SIZE 0x80000000 - -/* - * DRAM at 0x8000_0000 is divided in two regions: - * - Secure DRAM (default is the top 16MB except for the last 2MB, which are - * used by the SCP for DDR retraining) - * - Non-Secure DRAM (remaining DRAM starting at DRAM_BASE) - */ - -#define DRAM_SCP_SIZE 0x00200000 -#define DRAM_SCP_BASE (DRAM_BASE + DRAM_SIZE - DRAM_SCP_SIZE) - -#define DRAM_SEC_SIZE 0x00E00000 -#define DRAM_SEC_BASE (DRAM_SCP_BASE - DRAM_SEC_SIZE) - -#define DRAM_NS_BASE DRAM_BASE -#define DRAM_NS_SIZE (DRAM_SIZE - DRAM_SCP_SIZE - DRAM_SEC_SIZE) - -/* Second region of DRAM */ -#define DRAM2_BASE 0x880000000 -#define DRAM2_SIZE 0x180000000 - -/* Memory mapped Generic timer interfaces */ -#define SYS_CNTCTL_BASE 0x2a430000 -#define SYS_CNTREAD_BASE 0x2a800000 -#define SYS_TIMCTL_BASE 0x2a810000 - -/* - * Base memory address of the V2M-Juno motherboard APB system registers in the - * IOFPGA - */ -#define VE_SYSREGS_BASE 0x1c010000 -/* APB system registers in address offset order from the base memory address */ -#define V2M_SYS_ID 0x0 -#define V2M_SYS_LED 0x8 - -/* V2M SYS_ID register bits */ -#define SYS_ID_REV_SHIFT 28 -#define SYS_ID_REV_MASK 0xf /* Board revisions */ -#define REV_JUNO_R0 0x1 /* Rev B */ -#define REV_JUNO_R1 0x2 /* Rev C */ - -/* - * V2M sysled bit definitions. The values written to this - * register are defined in arch.h & runtime_svc.h. Only - * used by the primary cpu to diagnose any cold boot issues. - * - * SYS_LED[0] - Security state (S=0/NS=1) - * SYS_LED[2:1] - Exception Level (EL3-EL0) - * SYS_LED[7:3] - Exception Class (Sync/Async & origin) - * - */ -#define SYS_LED_SS_SHIFT 0x0 -#define SYS_LED_EL_SHIFT 0x1 -#define SYS_LED_EC_SHIFT 0x3 +#define REV_JUNO_R0 0x1 /* Rev B */ +#define REV_JUNO_R1 0x2 /* Rev C */ -/* - * The number of regions like RO(code), coherent and data required by - * different BL stages which need to be mapped in the MMU. - */ -#if USE_COHERENT_MEM -#define JUNO_BL_REGIONS 3 -#else -#define JUNO_BL_REGIONS 2 -#endif - -/* - * The JUNO_MAX_MMAP_REGIONS depend on the number of entries in juno_mmap[] - * defined for each BL stage in juno_common.c. - */ -#if IMAGE_BL1 -#define JUNO_MMAP_ENTRIES 6 -#endif -#if IMAGE_BL2 -#define JUNO_MMAP_ENTRIES 8 -#endif -#if IMAGE_BL31 -#define JUNO_MMAP_ENTRIES 5 -#endif -#if IMAGE_BL32 -#define JUNO_MMAP_ENTRIES 4 -#endif - -/******************************************************************************* - * GIC-400 & interrupt handling related constants - ******************************************************************************/ -#define GICD_BASE 0x2c010000 -#define GICC_BASE 0x2c02f000 -#define GICH_BASE 0x2c04f000 -#define GICV_BASE 0x2c06f000 - -#define IRQ_MHU 69 -#define IRQ_GPU_SMMU_0 71 -#define IRQ_GPU_SMMU_1 73 -#define IRQ_ETR_SMMU 75 -#define IRQ_TZC400 80 -#define IRQ_TZ_WDOG 86 - -#define IRQ_SEC_PHY_TIMER 29 -#define IRQ_SEC_SGI_0 8 -#define IRQ_SEC_SGI_1 9 -#define IRQ_SEC_SGI_2 10 -#define IRQ_SEC_SGI_3 11 -#define IRQ_SEC_SGI_4 12 -#define IRQ_SEC_SGI_5 13 -#define IRQ_SEC_SGI_6 14 -#define IRQ_SEC_SGI_7 15 - -/******************************************************************************* - * PL011 related constants - ******************************************************************************/ -/* FPGA UART0 */ -#define PL011_UART0_BASE 0x1c090000 -/* FPGA UART1 */ -#define PL011_UART1_BASE 0x1c0a0000 -/* SoC UART0 */ -#define PL011_UART2_BASE 0x7ff80000 -/* SoC UART1 */ -#define PL011_UART3_BASE 0x7ff70000 - -#define PL011_BAUDRATE 115200 - -#define PL011_UART0_CLK_IN_HZ 24000000 -#define PL011_UART1_CLK_IN_HZ 24000000 -#define PL011_UART2_CLK_IN_HZ 7273800 -#define PL011_UART3_CLK_IN_HZ 7273800 - -/******************************************************************************* - * NIC-400 related constants - ******************************************************************************/ - -/* CSS NIC-400 Global Programmers View (GPV) */ -#define CSS_NIC400_BASE 0x2a000000 +/* Bypass offset from start of NOR flash */ +#define BL1_ROM_BYPASS_OFFSET 0x03EC0000 -/* The slave_bootsecure controls access to GPU, DMC and CS. */ -#define CSS_NIC400_SLAVE_BOOTSECURE 8 +#define EMMC_BASE 0x0c000000 +#define EMMC_SIZE 0x04000000 -/* SoC NIC-400 Global Programmers View (GPV) */ -#define SOC_NIC400_BASE 0x7fd00000 +#define PSRAM_BASE 0x14000000 +#define PSRAM_SIZE 0x02000000 -#define SOC_NIC400_USB_EHCI 0 -#define SOC_NIC400_TLX_MASTER 1 -#define SOC_NIC400_USB_OHCI 2 -#define SOC_NIC400_PL354_SMC 3 -/* - * The apb4_bridge controls access to: - * - the PCIe configuration registers - * - the MMU units for USB, HDLCD and DMA - */ -#define SOC_NIC400_APB4_BRIDGE 4 -/* - * The bootsec_bridge controls access to a bunch of peripherals, e.g. the UARTs. - */ -#define SOC_NIC400_BOOTSEC_BRIDGE 5 -#define SOC_NIC400_BOOTSEC_BRIDGE_UART1 (1 << 12) /******************************************************************************* * TZC-400 related constants ******************************************************************************/ -#define TZC400_BASE 0x2a4a0000 - -#define TZC400_NSAID_CCI400 0 /* Note: Same as default NSAID!! */ -#define TZC400_NSAID_PCIE 1 -#define TZC400_NSAID_HDLCD0 2 -#define TZC400_NSAID_HDLCD1 3 -#define TZC400_NSAID_USB 4 -#define TZC400_NSAID_DMA330 5 -#define TZC400_NSAID_THINLINKS 6 -#define TZC400_NSAID_AP 9 -#define TZC400_NSAID_GPU 10 -#define TZC400_NSAID_SCP 11 -#define TZC400_NSAID_CORESIGHT 12 - -/******************************************************************************* - * CCI-400 related constants - ******************************************************************************/ -#define CCI400_BASE 0x2c090000 -#define CCI400_CLUSTER0_SL_IFACE_IX 4 -#define CCI400_CLUSTER1_SL_IFACE_IX 3 - -/******************************************************************************* - * SCP <=> AP boot configuration - ******************************************************************************/ -#define SCP_BOOT_CFG_ADDR 0x04000080 -#define PRIMARY_CPU_SHIFT 8 -#define PRIMARY_CPU_MASK 0xf +#define TZC400_NSAID_CCI400 0 /* Note: Same as default NSAID!! */ +#define TZC400_NSAID_PCIE 1 +#define TZC400_NSAID_HDLCD0 2 +#define TZC400_NSAID_HDLCD1 3 +#define TZC400_NSAID_USB 4 +#define TZC400_NSAID_DMA330 5 +#define TZC400_NSAID_THINLINKS 6 +#define TZC400_NSAID_AP 9 +#define TZC400_NSAID_GPU 10 +#define TZC400_NSAID_SCP 11 +#define TZC400_NSAID_CORESIGHT 12 /******************************************************************************* * MMU-401 related constants ******************************************************************************/ -#define MMU401_SSD_OFFSET 0x4000 -#define MMU401_DMA330_BASE 0x7fb00000 +#define MMU401_SSD_OFFSET 0x4000 +#define MMU401_DMA330_BASE 0x7fb00000 + #endif /* __JUNO_DEF_H__ */ |