summaryrefslogtreecommitdiff
path: root/ld/Makefile.in
Commit message (Collapse)AuthorAgeFilesLines
* bfd+ld: when / whether to generate .c filesJan Beulich2023-04-041-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Having been irritated by seeing bfd/elf{32,64}-aarch64.c to be re- generated in x86-only builds, I came across 769a27ade588 ("Re: bfd BLD-POTFILES.in dependencies"). I think this went slightly too far, as outside of maintainer mode dependencies will cause the subset of files to be (re-)generated which are actually needed for the build. Generating them all is only needed when wanting to update certain files under bfd/po/, i.e. in maintainer mode. In the course of looking around in an attempt to try to understand how things are meant to work, I further noticed that ld has got things slightly wrong too: BLD-POTFILES.in depending on $(BLD_POTFILES) isn't quite right (the output doesn't change when any of the enumerated files changes; it's the mere presence which matters); like in bfd it looks like we would better extend BUILT_SOURCES accordingly. Furthermore it became apparent that ld fails to enumerate the .c files generated from the .l and .y ones. While in their absence it was benign whether translatable strings in the source files were actually marked as such, this now becomes relevant. Mark respective strings at the same time, but skipping ones which look to be of interest for debugging purposes only (e.g. such used by printf() enclosed in #ifdef TRACE).
* configure: add new target aarch64-*-nto*Clément Chigot2023-03-161-0/+3
| | | | This target has its own ld emulation based on aarch64elf.em.
* Revert ld DIGEST supportAlan Modra2023-03-101-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a hopefully temporary reversion of new ld features for embedded processors by Ulf Samuelsson, plus some followup patches. Squashed together from the following: Revert "lddigest 32-bit support and gcc-4 compile errors" This reverts commit d7ee19be87110a8f5342cec6e323d83d01c641d1. Revert "ld: Use correct types for crc64 calculations" This reverts commit 9a534b9f8e3d0f3cdb5a20f19ff165693fbb84d2. Revert "Re: DIGEST: testsuite" This reverts commit c8e85484d8a0fe9f7b88e00a6b9ae63bcb53ba32. Revert "Regen potfiles" This reverts commit 4d98c966f8bf305ab25badd34cb295631873cf7c. Revert "DIGEST: Makefile.*" This reverts commit 78ef6ab03f56ce83a606d974bb8a9f34b5d6e0b7. Revert "DIGEST: calculation" This reverts commit 5243990191e683d5066d3dd622c76deaba0bf15c. Revert "DIGEST: ldlang.*: add timestamp" This reverts commit bd9466d4aa277a469a9d8b12f0a6e6fa51678e36. Revert "DIGEST: ldmain.c" This reverts commit c8f8653fa7eeb3dc0769ac23039eadb5c5f09dff. Revert "DIGEST: ldgram.y" This reverts commit d73c01be2669e9c5267fab669a269f95a32048c9. Revert "DIGEST: ldlex.l" This reverts commit 48b5163a9dd5759cc87171331bbd6e902c547b5a. Revert "DIGEST: testsuite" This reverts commit a4135d1a4886400ea29af2da782dd8dd40ccad23. Revert "DIGEST: Documentation" This reverts commit 3ec28966c3e4c63704212778f96c517cbf2e0090. Revert "DIGEST: NEWS" This reverts commit 099bf2927d446424e8585a60cf4ce63209999aa2. Revert "DIGEST: LICENSING" This reverts commit 5c8a0c6654fb55926985edf3b360b62d4f20691d.
* Build ldintUlf Samuelsson2023-03-071-6/+47
| | | | Signed-off-by: Ulf Samuelsson <ulf@emagii.com>
* DIGEST: Makefile.*Ulf Samuelsson2023-03-071-0/+13
| | | | | | | | | | | | | | The Makefile.in was generated using automake after adding a few files. When adding the ldreflect.* files, the autotools versions were wrong. After upgrading the host OS, autotools were upgraded to 2.71 reinstalling the desired 2.69 still generates a lot of changes. Makefile.ini has therefore been manually edited. Signed-off-by: Ulf Samuelsson <ulf@emagii.com>
* [PR 30082] Pass $JANSSON_LIBS and $ZSTD_LIBS to ld-bootstrap/bootrap.expRomain Geissler2023-02-061-0/+1
|
* Add an extra emulation called arm64pe to the aarch64pe emulation.Nick Clifton2023-01-051-0/+3
|
* Update year range in copyright notice of binutils filesAlan Modra2023-01-011-1/+1
| | | | | | The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
* pdb build fixesAlan Modra2022-12-231-5/+6
| | | | | | | Enable compilation of ld/pdb.c just for x86, as is done for bfd/pdb.c. This reduces the size of ld and is necessary with the following patches that call a COFF-only bfd function from ld/pdb.c. Without it we'd break every non-COFF target build.
* bfd: linker: merge .sframe sectionsIndu Bhagat2022-11-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The linker merges all the input .sframe sections. When merging, the linker verifies that all the input .sframe sections have the same abi/arch. The linker uses libsframe library to perform key actions on the .sframe sections - decode, read, and create output data. This implies buildsystem changes to make and install libsframe before libbfd. The linker places the output .sframe section in a new segment of its own: PT_GNU_SFRAME. A new segment is not added, however, if the generated .sframe section is empty. When a section is discarded from the final link, the corresponding entries in the .sframe section for those functions are also deleted. The linker sorts the SFrame FDEs on start address by default and sets the SFRAME_F_FDE_SORTED flag in the .sframe section. This patch also adds support for generation of SFrame unwind information for the .plt* sections on x86_64. SFrame unwind info is generated for IBT enabled PLT, lazy/non-lazy PLT. The existing linker option --no-ld-generated-unwind-info has been adapted to include the control of whether .sframe unwind information will be generated for the linker generated sections like PLT. Changes to the linker script have been made as necessary. ChangeLog: * Makefile.def: Add install dependency on libsframe for libbfd. * Makefile.in: Regenerated. * bfd/Makefile.am: Add elf-sframe.c * bfd/Makefile.in: Regenerated. * bfd/bfd-in2.h (SEC_INFO_TYPE_SFRAME): Regenerated. * bfd/configure: Regenerate. * bfd/configure.ac: Add elf-sframe.lo. * bfd/elf-bfd.h (struct sframe_func_bfdinfo): New struct. (struct sframe_dec_info): Likewise. (struct sframe_enc_info): Likewise. (struct elf_link_hash_table): New member for encoded .sframe object. (struct output_elf_obj_tdata): New member. (elf_sframe): New access macro. (_bfd_elf_set_section_sframe): New declaration. * bfd/elf.c (get_segment_type): Handle new segment PT_GNU_SFRAME. (bfd_section_from_phdr): Likewise. (get_program_header_size): Likewise. (_bfd_elf_map_sections_to_segments): Likewise. * bfd/elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Add contents to the .sframe sections or .plt* entries. * bfd/elflink.c (elf_section_ignore_discarded_relocs): Handle SEC_INFO_TYPE_SFRAME. (_bfd_elf_default_action_discarded): Handle .sframe section. (elf_link_input_bfd): Merge .sframe section. (bfd_elf_final_link): Write the output .sframe section. (bfd_elf_discard_info): Handle discarding .sframe section. * bfd/elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Create .sframe section for .plt and .plt.sec. (_bfd_x86_elf_finish_dynamic_sections): Handle .sframe from .plt* sections. * bfd/elfxx-x86.h (PLT_SFRAME_FDE_START_OFFSET): New definition. (SFRAME_PLT0_MAX_NUM_FRES): Likewise. (SFRAME_PLTN_MAX_NUM_FRES): Likewise. (struct elf_x86_sframe_plt): New structure. (struct elf_x86_link_hash_table): New member. (struct elf_x86_init_table): New members for .sframe creation. * bfd/section.c: Add new definition SEC_INFO_TYPE_SFRAME. * binutils/readelf.c (get_segment_type): Handle new segment PT_GNU_SFRAME. * ld/ld.texi: Update documentation for --no-ld-generated-unwind-info. * ld/scripttempl/elf.sc: Support .sframe sections. * ld/Makefile.am (TESTSFRAMELIB): Use it. (check-DEJAGNU): Likewise. * ld/Makefile.in: Regenerated. * ld/configure.ac (TESTSFRAMELIB): Set to the .so or .a like TESTBFDLIB. * ld/configure: Regenerated. * bfd/elf-sframe.c: New file. include/ChangeLog: * elf/common.h (PT_GNU_SFRAME): New definition. * elf/internal.h (struct elf_segment_map): Handle new segment type PT_GNU_SFRAME. ld/testsuite/ChangeLog: * ld/testsuite/ld-bootstrap/bootstrap.exp: Add SFRAMELIB. * ld/testsuite/ld-aarch64/aarch64-elf.exp: Add new test sframe-simple-1. * ld/testsuite/ld-aarch64/sframe-bar.s: New file. * ld/testsuite/ld-aarch64/sframe-foo.s: Likewise. * ld/testsuite/ld-aarch64/sframe-simple-1.d: Likewise. * ld/testsuite/ld-sframe/sframe-empty.d: New test. * ld/testsuite/ld-sframe/sframe-empty.s: New file. * ld/testsuite/ld-sframe/sframe.exp: New testsuite. * ld/testsuite/ld-x86-64/sframe-bar.s: New file. * ld/testsuite/ld-x86-64/sframe-foo.s: Likewise. * ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise. * ld/testsuite/ld-x86-64/sframe-plt-1.d: Likewise. * ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Add new tests - sframe-simple-1, sframe-plt-1. * ld/testsuite/lib/ld-lib.exp: Add new proc to check if assembler supports SFrame section. * ld/testsuite/ld-sframe/discard.d: New file. * ld/testsuite/ld-sframe/discard.ld: Likewise. * ld/testsuite/ld-sframe/discard.s: Likewise.
* Re: aarch64-pe support for LD, GAS and BFDAlan Modra2022-10-201-0/+2
| | | | | Fix dependencies for eaarch64pe.c. Generated files aren't handled fully automatically.
* ld: Add minimal pdb generationMark Harmstone2022-10-201-5/+8
|
* aarch64-pe support for LD, GAS and BFDJedidiah Thompson2022-10-191-0/+1
| | | | | | | | Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE. Based on initial work by Jedidiah Thompson Co-authored-by: Jedidiah Thompson <wej22007@outlook.com> Co-authored-by: Zac Walker <zac.walker@linaro.org>
* binutils, gdb: support zstd compressed debug sectionsFangrui Song2022-09-261-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ```
* Fix regeneration of ld configure and makefilesNick Clifton2022-07-081-1260/+412
|
* Update version to 2.39.50 and regenerate filesNick Clifton2022-07-081-412/+1260
|
* drop XC16x bitsJan Beulich2022-06-271-9/+0
| | | | | | | | | | Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved the architecture from the "obsolete but still available" to the "obsolete / support removed" list in config.bfd, making the architecture impossible to enable (except maybe via "enable everything" options"). Note that I didn't touch */po/*.po{,t} on the assumption that these would be updated by some (half)automatic means.
* ld: add --package-metadataLuca Boccassi2022-05-261-3/+9
| | | | | | | | | | | | Generate a .note.package FDO package metadata ELF note, following the spec: https://systemd.io/ELF_PACKAGE_METADATA/ If the jansson library is available at build time (and it is explicitly enabled), link ld to it, and use it to validate that the input is correct JSON, to avoid writing garbage to the file. The configure option --enable-jansson has to be used to explicitly enable it (error out when not found). This allows bootstrappers (or others who are not interested) to seamlessly skip it without issues.
* x86: drop L1OM/K1OM support from ldJan Beulich2022-03-241-12/+0
| | | | | This was only rudimentary support anyway; none of the sub-architecture specific insns were ever supported.
* Regenerate Makefile.in files with automake 1.15.1H.J. Lu2022-01-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Regenerate Makefile.in files with the unmodified automake 1.15.1 to remove runstatedir = @runstatedir@ bfd/ * Makefile.in: Regenerate. binutils/ * Makefile.in: Regenerate. gas/ * Makefile.in: Regenerate. gold/ * Makefile.in: Regenerate. * testsuite/Makefile.in: Likewise. gprof/ * Makefile.in: Regenerate. ld/ * Makefile.in: Regenerate. opcodes/ * Makefile.in: Regenerate.
* Update the config.guess and config.sub files from the master repository and ↵Nick Clifton2022-01-171-0/+1
| | | | regenerate files.
* Update year range in copyright notice of binutils filesAlan Modra2022-01-021-1/+1
| | | | | | | | | | The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
* unify 64-bit bfd checksMike Frysinger2022-01-011-0/+1
| | | | | | | | Move the 64-bit bfd logic out of bfd/configure.ac and into bfd64.m4 under config so it can be shared between all the other subdirs. This replaces want64 with enable_64_bit_bfd which was already being declared, but not used directly.
* ld: enable silent build rulesMike Frysinger2021-11-291-31/+31
| | | | Also add $(AM_V_xxx) to various manual rules in here.
* Regenerate a couple of filesAlan Modra2021-11-151-2/+3
| | | | | | | | | | | | A couple of files changed on my latest --enable-maintainer-mode build. ld/Makefile.in had a missing dependency but better sorting of the loongson entries. intl/ * configure: Regenerate. ld/ * Makefile.am: Sort loongson entries. * Makefile.in: Regenerate.
* LoongArch ld supportliuzhensong2021-10-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> Xiaolin Tang <tangxiaolin@loongson.cn> ld/ * Makefile.am: Add LoongArch. * NEWS: Mention LoongArch support. * configure.tgt: Add LoongArch. * emulparams/elf32loongarch-defs.sh: New. * emulparams/elf32loongarch.sh: Likewise. * emulparams/elf64loongarch-defs.sh: Likewise. * emulparams/elf64loongarch.sh: Likewise. * emultempl/loongarchelf.em: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. ld/testsuite/ * ld-loongarch-elf/disas-jirl.d: New. * ld-loongarch-elf/disas-jirl.s: Likewise. * ld-loongarch-elf/jmp_op.d: Likewise. * ld-loongarch-elf/jmp_op.s: Likewise. * ld-loongarch-elf/ld-loongarch-elf.exp: Likewise. * ld-loongarch-elf/macro_op.d: Likewise. * ld-loongarch-elf/macro_op.s: Likewise. * ld-loongarch-elf/syscall-0.s: Likewise. * ld-loongarch-elf/syscall-1.s: Likewise. * ld-loongarch-elf/syscall.d: Likewise. * ld-srec/srec.exp: Add LoongArch. * ld-unique/pr21529.d: Likewise.
* Move eelf_mipsel_haiki.c to ALL_64_EMULATION_SOURCESAlan Modra2021-09-201-59/+66
| | | | | | | | | | | | | | --enable-targets=all on a 32-bit host results in a link failure with undefined references due to elfxx-mips.c not being compiled. This patch fixes that by putting eelf_mipsel_haiki.c in the correct EMULATION_SOURCES Makefile variable. I've also added a bunch of missing file dependencies and sorted a few things so that it's easier to verify dependencies are present. * Makfile.am: Add missing haiku dependencies, sort. (ALL_EMULATION_SOURCES): Sort. Move eelf_mipsel_haiku.c to.. (ALL_64_EMULATION_SOURCES): ..here. Sort. * Makfile.in: Regenerate.
* ld testsuite tidyAlan Modra2021-09-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes a few issues: 1) If you use "-fsanitize=address,undefined" in CFLAGS, the Makefile attempt to trim off -fsanitize options left us with ",undefined". 2) ld_compile adds CFLAGS_FOR_TARGET itself, no need to pass it. 3) CFLAGS might be needed linking bootstrap test. * Makefile.am (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Trim off all -fsanitize=*. * Makefile.in: Regenerate. * testsuite/ld-bootstrap/bootstrap.exp: Use CFLAGS when linking. * testsuite/ld-cdtest/cdtest.exp: Use CFLAGS_FOR_TARGET when linking. * testsuite/ld-auto-import/auto-import.exp: Don't pass CFLAGS_FOR_TARGET to ld_compile. * testsuite/ld-cygwin/exe-export.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-pe/pe-compile.exp: Likewise. * testsuite/ld-pe/pe-run.exp: Likewise. * testsuite/ld-pe/pe-run2.exp: Likewise. * testsuite/ld-plugin/plugin.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise, and don't allow nios2 testing to trash CFLAGS_FOR_TARGET. * testsuite/ld-scripts/crossref.exp: Don't pass options in CC_FOR_TARGET, do so in CFLAGS_FOR_TARGET instead. * testsuite/ld-srec/srec.exp: Likewise, and for CXX.
* CC_FOR_TARGET et alAlan Modra2021-09-031-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The top level Makefile, the ld Makefile and others, define CC_FOR_TARGET to be a compiler for the binutils target machine. This is the compiler that should be used for almost all tests with C source. There are _FOR_TARGET versions of CFLAGS, CXX, and CXXFLAGS too. This was all supposed to work with the testsuite .exp files using CC for the target compiler, and CC_FOR_HOST for the host compiler, with the makefiles passing CC=$CC_FOR_TARGET and CC_FOR_HOST=$CC to the runtest invocation. One exception to the rule of using CC_FOR_TARGET is the native-only ld bootstrap test, which uses the newly built ld to link a copy of itself. Since the files being linked were created with the host compiler, the boostrap test should use CC and CFLAGS, in case some host compiler option provides needed libraries automatically. However, bootstrap.exp used CC where it should have used CC_FOR_HOST. I set about fixing that problem, then decided that playing games in the makefiles with CC was a bad idea. Not only is it confusing, but other dejagnu code knows about CC_FOR_TARGET. See dejagnu/target.exp. So this patch gets rid of the makefile variable renaming and changes all the .exp files to use the correct _FOR_TARGET variables. CC_FOR_HOST and CFLAGS_FOR_HOST disappear. A followup patch will correct bootstrap.exp to use CFLAGS, and a number of other things I noticed. binutils/ * testsuite/lib/binutils-common.exp (run_dump_test): Use CC_FOR_TARGET and CFLAGS_FOR_TARGET rather than CC and CFLAGS. ld/ * Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET and similar. Pass variables with unchanged names. Don't set CC_FOR_HOST or CFLAGS_FOR_HOST. * Makefile.in: Regenerate. * testsuite/config/default.exp: Update default CC and similar. (compiler_supports, plug_opt): Use CC_FOR_TARGET. * testsuite/ld-cdtest/cdtest.exp: Replace all uses of CC with CC_FOR_TARGET, and similarly for CFLAGS, CXX and CXXFLAGS. * testsuite/ld-auto-import/auto-import.exp: Likewise. * testsuite/ld-cygwin/exe-export.exp: Likewise. * testsuite/ld-elf/dwarf.exp: Likewise. * testsuite/ld-elf/indirect.exp: Likewise. * testsuite/ld-elf/shared.exp: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-ifunc/ifunc.exp: Likewise. * testsuite/ld-mn10300/mn10300.exp: Likewise. * testsuite/ld-pe/pe-compile.exp: Likewise. * testsuite/ld-pe/pe-run.exp: Likewise. * testsuite/ld-pe/pe-run2.exp: Likewise. * testsuite/ld-pie/pie.exp: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-plugin/plugin.exp: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * testsuite/ld-unique/unique.exp: Likewise. * testsuite/ld-x86-64/tls.exp: Likewise. * testsuite/lib/ld-lib.exp: Likewise. libctf/ * Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET. Pass CC and CC_FOR_TARGET. Don't set CC_FOR_HOST. * Makefile.in: Regenerate. * testsuite/config/default.exp: Update default CC and similar. * testsuite/lib/ctf-lib.exp (run_native_host_cmd): Use CC rather than CC_FOR_HOST. (run_lookup_test): Use CC_FOR_TARGET and CFLAGS_FOR_TARGET.
* haiku tidyAlan Modra2021-09-031-3/+3
| | | | | | | | | | | | | | | --enable-maintainer-mode showed a number of files needing to be regenerated, and in the case of ld/Makefile.in that the file was regenerated by hand. Nothing to see here really. ld/ * Makefile.am (ALL_64_EMULATION_SOURCES): Sort haiku entry. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. libctf/ * configure: Regenerate. zlib/ * configure: Regenerate.
* Add support for the haiku operating system. These are the os support ↵Alexander von Gluck IV2021-09-021-0/+12
| | | | patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time.
* Prevent libdel.dll.a from being installed on Windows based systems.Nick Clifton2021-05-111-0/+1
| | | | | | | PR 27113 * Makefile.am (install-data-local): Also delete libdep.dll.a if it is present. * Makefile.in: Regenerate.
* support generating multi-html pages in parallelMike Frysinger2021-05-081-7/+13
| | | | | | | | | | | Use the pattern from other projects where we generate the html pages in a dir named the same as the project. So now we have: gas/doc/gas.html - single html page gas/doc/gas/ - multiple html pages This works for projects that have a doc/ subdir already, but gprof & ld require a little tweaking since they generate their docs in their respective toplevels.
* generate single html manual page by defaultMike Frysinger2021-05-081-1/+1
| | | | | | This better matches other GNU projects like autoconf/automake where the html manual is the single page form. We'll support the multi-page form in a follow up change.
* riscv --enable-targets=all on 32-bit hostAlan Modra2021-03-121-6/+6
| | | | | | | | | | | | | | | Attempting to build --enable-targets=all on a 32-bit host results in a number of errors like the following. eelf32lriscv.o: in function `gldelf32lriscv_after_allocation': eelf32lriscv.c:98: undefined reference to `bfd_elf32_riscv_restart_relax_sections' That's due to needing --enable-64-bit-bfd to get the riscv BFD support built. * Makefile.am (ALL_EMULATION_SOURCES): Move riscv files to.. (ALL_64_EMULATION_SOURCES): ..here. * Makefile.in: Regenerate.
* Remove arm-symbianelfAlan Modra2021-02-091-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * configure.ac: Delete arm*-*-symbianelf* entry. * configure: Regenerate. bfd/ * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. * configure.ac: Delete symbian entries. * elf-bfd.h (enum elf_target_os): Delete is_symbian. * elf32-arm.c: Remove symbian support. Formatting. * targets.c: Delete symbian entries. * configure: Regenerate. binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove symbianelf. gas/ * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN support. * config/te-symbian.h: Delete. * configure.tgt: Remove arm-*-symbianelf*. * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in target selection. * testsuite/gas/arm/arch4t.d: Likewise. * testsuite/gas/arm/got_prel.d: Likewise. * testsuite/gas/arm/mapdir.d: Likewise. * testsuite/gas/arm/mapmisc.d: Likewise. * testsuite/gas/arm/mapsecs.d: Likewise. * testsuite/gas/arm/mapshort-eabi.d: Likewise. * testsuite/gas/arm/thumb-eabi.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumbrel.d: Likewise. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. Don't include symbian dep file. * configure.tgt: Remove arm*-*-symbianelf* entry. * emulparams/armsymbian.sh: Delete. * ld.texi: Don't mention symbian. * scripttempl/armbpabi.sc: Delete. * testsuite/ld-arm/symbian-seg1.d: Delete. * testsuite/ld-arm/symbian-seg1.s: Delete. * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
* ld testsuite on x86_64 with --enable-sharedAlan Modra2021-02-051-0/+1
| | | | | | | | | | | | | | These tests fail since 1c9c9b9b5552, due to not being able to access some scripts: FAIL: Absolute non-overflowing relocs FAIL: ld-i386/iamcu-1 FAIL: ld-i386/iamcu-2 The problem is that when built with --enable-shared the ld-new executable sits in a .libs/ directory. * Makefile.am (check-DEJAGNU): Set up ldscripts link in .libs. * Makefile.in: Regenerate.
* Regen Makefile.in for jobserver.m4 aclocal.m4 dependencyAlan Modra2021-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | bfd/ * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. binutils/ * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * Makefile.in: Regenerate. * Makefile.in: Regenerate. gprof/ * Makefile.in: Regenerate. ld/ * Makefile.in: Regenerate. libctf/ * Makefile.in: Regenerate. opcodes/ * Makefile.in: Regenerate.
* configure regenAlan Modra2021-01-091-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | commit f478212851 did the regen by hand, missed a change in ld/configure and didn't update line numbers. Fix that, and an old regen of ld/Makefile.in with the wrong automake. bfd/ * configure: Regenerate. binutils/ * configure: Regenerate. gas/ * configure: Regenerate. gprof/ * configure: Regenerate. ld/ * Makefile.in: Regenerate. * configure: Regenerate. libctf/ * configure: Regenerate. opcodes/ * configure: Regenerate. zlib/ * configure: Regenerate.
* RISC-V: Implement support for big endian targets.Marcus Comstedt2021-01-061-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RISC-V instruction/code is always little endian, but data might be big-endian. Therefore, we can not use the original bfd_get/bfd_put to get/put the code for big endian targets. Add new riscv_get_insn and riscv_put_insn to always get/put code as little endian can resolve the problem. Just remember to update them once we have supported the 48-bit/128-bit instructions in the future patches. bfd/ * config.bfd: Added targets riscv64be*-*-*, riscv32be*-*-* and riscvbe*-*-*. Also added riscv_elf[32|64]_be_vec. * configure.ac: Handle riscv_elf[32|64]_be_vec. * configure: Regenerate. * elfnn-riscv.c: Include <limits.h> and define CHAR_BIT for riscv_is_insn_reloc. (riscv_get_insn): RISC-V instructions are always little endian, but bfd_get may be used for big-endian, so add new riscv_get_insn to handle the insturctions. (riscv_put_insn): Likewsie. (riscv_is_insn_reloc): Check if we are relocaing an instruction. (perform_relocation): Call riscv_is_insn_reloc to decide if we should use riscv_[get|put]_insn or bfd_[get|put]. (riscv_zero_pcrel_hi_reloc): Use riscv_[get|put]_insn, bfd_[get|put]l32 or bfd_[get|put]l16 for code. (riscv_elf_relocate_section): Likewise. (riscv_elf_finish_dynamic_symbol): Likewise. (riscv_elf_finish_dynamic_sections): Likewise. (_bfd_riscv_relax_call): Likewise. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_pc): Likewise. (riscv_elf_object_p): Handled for big endian. (TARGET_BIG_SYM, TARGET_BIG_NAME): Defined. * targets.c: Add riscv_elf[32|64]_be_vec. (_bfd_target_vector): Likewise. gas/ * config/tc-riscv.c (riscv_target_format): Add elf64-bigriscv and elf32-bigriscv. (install_insn): Always write instructions as little endian. (riscv_make_nops): Likewise. (md_convert_frag_branch): Likewise. (md_number_to_chars): Write data in target endianness. (options, md_longopts): Add -mbig-endian and -mlittle-endian options. (md_parse_option): Handle the endian options. * config/tc-riscv.h: Only define TARGET_BYTES_BIG_ENDIAN if not already defined. * configure.tgt: Added riscv64be*, riscv32be*, riscvbe*. ld/ * configure.tgt: Added riscvbe-*-*, riscv32be*-*-*, riscv64be*-*-*, riscv32be*-*-linux*, and riscv64be*-*-linux*. * Makefile.am: Added eelf32briscv.c, eelf32briscv_ilp32f.c and eelf32briscv_ilp32.c. * Makefile.in: Regenerate. * emulparams/elf32briscv.sh: Added. * emulparams/elf32briscv_ilp32.sh: Likewise. * emulparams/elf32briscv_ilp32f.sh: Likewise. * emulparams/elf64briscv.sh: Likewise. * emulparams/elf64briscv_lp64.sh: Likewise. * emulparams/elf64briscv_lp64f.sh: Likewise.
* Update year range in copyright notice of binutils filesAlan Modra2021-01-011-1/+1
|
* ld: Build and install only unversioned libdepH.J. Lu2020-12-181-9/+12
| | | | | | | | | | | | Build only unversioned libdep and remove the installed libdep.la since only a single libdep.so is needed. PR ld/27082 * Makefile.am (libdep_la_LDFLAGS): Add -module -avoid-version. (libdep_la_LINK): New. (install-data-local): Depend on $(install-bfdpluginLTLIBRARIES) and remove libdep.la.
* Add a plugin for processing static library dependencies.Howard Chu2020-12-141-52/+106
| | | | | | | | | * libdep_plugin.c: New file: Processes archives that contain a special library dependencies element. * Makefile.am: Add build rules for libdep_plugin. * Makefile.in: Regenerate. * NEWS: Mention the new plugin. * ld.texi: Document the new plugin.
* Fix regexp for development.expAndreas Schwab2020-11-091-1/+1
| | | | | | | | | | | | binutils/: * Makefile.am (development.exp): Fix regexp. * Makefile.in: Regenerate. gas/: * Makefile.am (development.exp): Fix regexp. * Makefile.in: Regenerate. ld/: * Makefile.am (development.exp): Fix regexp. * Makefile.in: Regenerate.
* PR26667, Add powerpc64le-*-freebsd* supportBrandon Bergren2020-10-061-0/+3
| | | | | | | | | | | | | | | | | | | PR 26667 bfd/ * config.bfd: Add powerpc64le-*-freebsd*. * configure.ac: Add powerpc_elf64_fbsd_le_vec. * elf64-ppc.c (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Define for freebsd. * targets.c (powerpc_elf64_fbsd_le_vec): Declare. (_bfd_target_vector): Add it. * configure: Regenerate. ld/ * Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64lppc_fbsd.c. Include $(DEPDIR)/eelf64lppc_fbsd.Pc. * configure.tgt: Add powerpc64le-*-freebsd*. * emulparams/elf64lppc_fbsd.sh: New file. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
* Unify Solaris procfs and largefile handlingRainer Orth2020-07-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GDB currently doesn't build on 32-bit Solaris: * On Solaris 11.4/x86: In file included from /usr/include/sys/procfs.h:26, from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24: /usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment" #error "Cannot use procfs in the large file compilation environment" ^~~~~ * On Solaris 11.3/x86 there are several more instances of this. The interaction between procfs and large-file support historically has been a royal mess on Solaris: * There are two versions of the procfs interface: ** The old ioctl-based /proc, deprecated and not used any longer in either gdb or binutils. ** The `new' (introduced in Solaris 2.6, 1997) structured /proc. * There are two headers one can possibly include: ** <procfs.h> which only provides the structured /proc, definining _STRUCTURED_PROC=1 and then including ... ** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based /proc, but provides structured /proc if _STRUCTURED_PROC == 1. * procfs and the large-file environment didn't go well together: ** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit compilations when the large-file environment was active (_FILE_OFFSET_BITS == 64). ** In both Solaris 11.4 and Illumos, this restriction was lifted for structured /proc. So one has to be careful always to define _STRUCTURED_PROC=1 when testing for or using <sys/procfs.h> on Solaris. As the errors above show, this isn't always the case in binutils-gdb right now. Also one may need to disable large-file support for 32-bit compilations on Solaris. config/largefile.m4 meant to do this by wrapping the AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because it neglects the _STRUCTURED_PROC part. To make things even worse, since GCC 9 g++ predefines _FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to enable large-file support, this has no effect, breaking the gdb build. This patch addresses all this as follows: * All tests for the <sys/procfs.h> header are made with _STRUCTURED_PROC=1, the definition going into the various config.h files instead of having to make them (and sometimes failing) in the affected sources. * To cope with the g++ predefine of _FILE_OFFSET_BITS=64, -U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had been far easier to have just #undef _FILE_OFFSET_BITS in config.h, but unfortunately such a construct in config.in is commented by config.status irrespective of indentation and whitespace if large-file support is disabled. I found no way around this and putting the #undef in several global headers for bfd, binutils, ld, and gdb seemed way more invasive. * Last, the applicability check in largefile.m4 was modified only to disable largefile support if really needed. To do so, it checks if <sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it doesn't, the disabling only happens if gdb exists in-tree and isn't disabled, otherwise (building binutils from a tarball), there's no conflict. What initially confused me was the check for $plugins here, which originally caused the disabling not to take place. Since AC_PLUGINGS does enable plugin support if <dlfcn.h> exists (which it does on Solaris), the disabling never happened. I could find no explanation why the linker plugin needs large-file support but thought it would be enough if gld and GCC's lto-plugin agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not enough: lto-plugin uses the simple-object interface from libiberty, which includes off_t arguments. So to fully disable large-file support would mean also disabling it in libiberty and its users: gcc and libstdc++-v3. This seems highly undesirable, so I decided to disable the linker plugin instead if large-file support won't work. The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to predefined _FILE_OFFSET_BITS=64). Also regtested on amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4), x86_64-pc-linux-gnu and i686-pc-linux-gnu. config: * largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>: Check for <sys/procfs.h> incompatilibity with large-file support on Solaris. Only disable large-file support and perhaps plugins if needed. Set, substitute LARGEFILE_CPPFLAGS if so. bfd: * bfd.m4 (BFD_SYS_PROCFS_H): New macro. (BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H. Don't define _STRUCTURED_PROC. (BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise. * elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define. * configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * configure, config.in: Regenerate. * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. binutils: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gas: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gdb: * proc-api.c (_STRUCTURED_PROC): Don't define. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * procfs.c: Likewise. * Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * configure, config.in: Regenerate. gdbserver: * configure, config.in: Regenerate. gdbsupport: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * Makefile.in: Regenerate. * configure, config.in: Regenerate. gnulib: * configure.ac: Run ACX_LARGEFILE before gl_EARLY. * configure: Regenerate. gprof: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate. ld: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate.
* ld, testsuite: only run CTF tests when ld and GCC support CTFNick Alcock2020-07-221-2/+6
| | | | | | | | | | | | | | | | | | | The CTF testsuite runs GCC to generate CTF that it knows matches the input .c files before doing a run_dump_test over it. So we need a GCC capable of doing that, and we need to always avoid running those tests if libctf was disabled because the linker will never be capable of it. ld/ * configure.ac (enable_libctf): Substitute it. * Makefile.am (enablings.exp): New. (EXTRA_DEJAGNU_SITE_CONFIG): Add it. (DISTCLEANFILES): Likewise. * Makefile.in: Regenerate. * configure: Likewise. * testsuite/lib/ld-lib.exp (compile_one_cc): New. (check_ctf_available): Likewise. (skip_ctf_tests): Likewise. * testsuite/ld-ctf/ctf.exp: Call skip_ctf_tests.
* Remove powerpc PE supportAlan Modra2020-07-091-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Plus some leftover powerpc lynxos support. bfd/ * coff-ppc.c: Delete. * pe-ppc.c: Delete. * pei-ppc.c: Delete. * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Remove PE PPC. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags): Remove PPCMAGIC code. (coff_write_object_contents): Remove PPC_PE code. * config.bfd: Move powerpcle-pe to removed targets. * configure.ac: Remove powerpc PE entries. * libcoff-in.h (ppc_allocate_toc_section): Delete. (ppc_process_before_allocation): Delete. * peXXigen.c: Remove POWERPC_LE_PE code and comments. * targets.c: Remove powerpc PE vectors. * po/SRC-POTFILES.in: Regenerate. * libcoff.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils/ * dlltool.c: Remove powerpc PE support and comments. * configure.ac: Remove powerpc PE dlltool config. * configure: Regenerate. gas/ * config/obj-coff.h: Remove TE_PE support. * config/tc-ppc.c: Likewise. * config/tc-ppc.h: Likewise. * configure.tgt: Remove powerpc PE and powerpc lynxos. * testsuite/gas/cfi/cfi.exp (cfi-common-6): Remove powerpc PE condition. * testsuite/gas/macros/macros.exp: Don't xfail powerpc PE. include/ * coff/powerpc.h: Delete. ld/ * emulparams/ppcpe.sh: Delete. * scripttempl/ppcpe.sc: Delete. * emulparams/ppclynx.sh: Delete. * Makefile.am (ALL_EMULATION_SOURCES): Remove ppc PE and lynxos. * configure.tgt: Likewise. * emultempl/beos.em: Remove powerpc PE support. * emultempl/pe.em: Likewise. * po/BLD-POTFILES.in: Regenerate. * Makefile.in: Regenerate.
* Remove x86 NaCl target supportH.J. Lu2020-06-301-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NaCl has been deprecated: https://developer.chrome.com/native-client/migration and NaCl will completely disappear in 2021: https://lists.llvm.org/pipermail/llvm-dev/2020-April/141107.html Remove x86 NaCl target support from bfd, binutils, gas and ld. bfd/ * archures.c (bfd_mach_i386_nacl): Removed. (bfd_mach_i386_i386_nacl): Likewise. (bfd_mach_x86_64_nacl): Likewise. (bfd_mach_x64_32_nacl): Likewise. * config.bfd: Remove *-*-nacl* targets. * configure.ac: Remove x86 NaCl target vectors. * cpu-i386.c (bfd_arch_i386_onebyte_nop_fill): Removed. (bfd_x64_32_nacl_arch): Likewise. (bfd_x86_64_nacl_arch): Likewise. (bfd_i386_nacl_arch): Likewise. (bfd_x64_32_arch_intel_syntax): Updated. * elf32-i386.c: Don't include "elf-nacl.h". (elf_i386_nacl_plt): Removed. (elf_i386_nacl_plt0_entry): Likewise. (elf_i386_nacl_plt_entry): Likewise. (elf_i386_nacl_pic_plt0_entry): Likewise. (elf_i386_nacl_pic_plt_entry): Likewise. (elf_i386_nacl_eh_frame_plt): Likewise. (elf_i386_nacl_plt): Likewise. (elf32_i386_nacl_elf_object_p): Likewise. (elf_i386_get_synthetic_symtab): Updated. (elf_i386_link_setup_gnu_properties): Likewise. * elf64-x86-64.c: Don't include "elf-nacl.h". (elf_x86_64_nacl_plt): Removed. (elf64_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_nacl_plt0_entry): Likewise. (elf_x86_64_nacl_plt_entry): Likewise. (elf_x86_64_nacl_eh_frame_plt): Likewise. (elf_x86_64_nacl_plt): Likewise. (elf32_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_get_synthetic_symtab): Updated. (elf_x86_64_link_setup_gnu_properties): Likewise. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Likewise. * targets.c: Remove x86 NaCl target vectors. * bfd-in2.h: Regenerated. * configure: Likewise. binutils/ * NEWS: Mention x86 NaCl target support removal. * dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): Remove x86 NaCl target support. * testsuite/binutils-all/elfedit-1.d: Likewise. * testsuite/binutils-all/i386/i386.exp: Likewise. * testsuite/binutils-all/x86-64/objects.exp: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/x86-64.exp: Likewise. gas/ * NEWS: Mention x86 NaCl target support removal. * config/tc-i386.c: Remove x86 NaCl target support. * config/tc-i386.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/i386/i386.exp: Likewise. * testsuite/gas/i386/iamcu-1.d: Likewise. * testsuite/gas/i386/iamcu-2.d: Likewise. * testsuite/gas/i386/iamcu-3.d: Likewise. * testsuite/gas/i386/iamcu-4.d: Likewise. * testsuite/gas/i386/iamcu-5.d: Likewise. * testsuite/gas/i386/k1om.d: Likewise. * testsuite/gas/i386/l1om.d: Likewise. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c. Remove x86 NaCl dep files. * NEWS: Mention x86 NaCl target support removal. * configure.tgt: Remove x86 NaCl target support. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/elf.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-i386/align-branch-1.d: Likewise. * testsuite/ld-i386/export-class.exp: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/pie1.d: Likewise. * testsuite/ld-i386/pr12570a.d: Likewise. * testsuite/ld-i386/pr12570b.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-i386/pr19636-2d.d: Likewise. * testsuite/ld-i386/pr19636-2e.d: Likewise. * testsuite/ld-i386/pr20244-1a.d: Likewise. * testsuite/ld-i386/pr20244-1b.d: Likewise. * testsuite/ld-i386/pr20244-2a.d: Likewise. * testsuite/ld-i386/pr20244-2b.d: Likewise. * testsuite/ld-i386/pr20244-2c.d: Likewise. * testsuite/ld-i386/pr20244-4a.d: Likewise. * testsuite/ld-i386/pr20244-4b.d: Likewise. * testsuite/ld-i386/pr21884.d: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc-10-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-10-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-11-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-11-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-12-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-12-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-13-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-13-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-15-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-15-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-20-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-20-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-21-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-8-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-8-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-9-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-x86-64/align-branch-1.d: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pie3.d: Likewise. * testsuite/ld-x86-64/pr18160.d: Likewise. * testsuite/ld-x86-64/pr19013-x32.d: Likewise. * testsuite/ld-x86-64/pr19013.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1b.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr21884.d: Likewise. * testsuite/ld-x86-64/pr22393-3a.rd: Likewise. * testsuite/ld-x86-64/pr22393-3b.rd: Likewise. * testsuite/ld-x86-64/tlsgd10.dd: Likewise. * testsuite/ld-x86-64/tlsgd5.dd: Likewise. * testsuite/ld-x86-64/tlsgd8.dd: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * emulparams/elf32_x86_64_nacl.sh: Removed. * emulparams/elf_i386_nacl.sh: Likewise. * emulparams/elf_x86_64_nacl.sh: Likewise. * testsuite/ld-i386/emit-relocs-nacl.rd: Likewise. * testsuite/ld-i386/load1-nacl.d: Likewise. * testsuite/ld-i386/pie1-nacl.d: Likewise. * testsuite/ld-i386/plt-nacl.pd: Likewise. * testsuite/ld-i386/plt-pic-nacl.pd: Likewise. * testsuite/ld-i386/pr17709-nacl.rd: Likewise. * testsuite/ld-i386/pr19636-1d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2c-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2e-nacl.d: Likewise. * testsuite/ld-i386/pr19827-nacl.rd: Likewise. * testsuite/ld-i386/pr21884-nacl.d: Likewise. * testsuite/ld-i386/pr21884-nacl.t: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin2-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic2-nacl.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/load1a-nacl.d: Likewise. * testsuite/ld-x86-64/load1b-nacl.d: Likewise. * testsuite/ld-x86-64/load1c-nacl.d: Likewise. * testsuite/ld-x86-64/load1d-nacl.d: Likewise. * testsuite/ld-x86-64/pie3-nacl.d: Likewise. * testsuite/ld-x86-64/plt-nacl.pd: Likewise. * testsuite/ld-x86-64/pr17709-nacl.rd: Likewise. * testsuite/ld-x86-64/pr19013-nacl.d: Likewise. * testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise. * testsuite/ld-x86-64/pr19827-nacl.rd: Likewise. * testsuite/ld-x86-64/pr21884-nacl.d: Likewise. * testsuite/ld-x86-64/pr21884-nacl.t: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.pd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise. * Makefile.in: Regenerated. * po/BLD-POTFILES.in: Likewise.
* binutils, ld: work with --disable-libctfNick Alcock2020-06-261-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This unfortunately means conditionalizing out all the libctf code, but the result is not too unbearably ugly, if a bit repetitive. I have stubbed out code in the !ENABLE_LIBCTF path to avoid extra redundant ifdefs where it seems that might be helpful. (The stubs are not too disruptive, but I've tried to keep them on one line where possible to avoid filling up the screen with stubs that nobody would care about. If this is too much of a coding style violation I can change it.) Changes since v2: use GCC_ENABLE rather than repeating all the AC_ARG_ENABLE stuff over and over again. ld/ * configure.ac [--enable-libctf]: New, default yes. Set ENABLE_LIBCTF accordingly. * Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * ldlang.c (ctf_output): Conditionalize on ENABLE_LIBCTF. (ldlang_open_ctf): Likewise. (lang_merge_ctf): Likewise. (ldlang_ctf_apply_strsym): Likewise. (lang_write_ctf): Likewise. (ldlang_write_ctf_late): Likewise. (ldlang_open_ctf) [!ENABLE_LIBCTF]: Warn about the presence of CTF sections. (lang_merge_ctf) [!ENABLE_LIBCTF]: New stub. (ldlang_ctf_apply_strsym) [!ENABLE_LIBCTF]: Likewise. (lang_write_ctf) [!ENABLE_LIBCTF]: Likewise. (ldlang_write_ctf_late) [!ENABLE_LIBCTF]: Likewise. * ldelfgen.c (ldelf_emit_ctf_early): Conditionalize on ENABLE_LIBCTF. (struct ctf_strsym_iter_cb_arg): Likewise. (ldelf_ctf_strtab_iter_cb): Likewise. (ldelf_ctf_symbols_iter_cb): Likewise. (ldelf_examine_strtab_for_ctf): Likewise. (ldelf_emit_ctf_early) [!ENABLE_LIBCTF]: New stub. (ldelf_examine_strtab_for_ctf) [!ENABLE_LIBCTF]: New stub. binutils/ * configure.ac [--enable-libctf]: New, default yes. Set ENABLE_LIBCTF accordingly. * Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF and LIBCTF_NOBFD. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * objdump.c (usage): Conditionalize portions on ENABLE_LIBCTF. (option_values): Likewise. (long_options): Likewise. (main): Likewise. (dump_ctf_indent_lines): Conditionalize out when !ENABLE_LIBCTF. (make_ctfsect): Likewise. (dump_ctf_archive_member): Likewise. (dump_ctf) [ENABLE_LIBCTF]: Likewise. (dump_ctf) [!ENABLE_LIBCTF]: New empty stub. * readelf.c (options): Conditionalize portions on ENABLE_LIBCTF. (usage): Likewise. (process_section_contents): Likewise. (shdr_to_ctf_sect): Conditionalize out when !ENABLE_LIBCTF. (dump_ctf_indent_lines): Likewise. (dump_section_as_ctf) [ENABLE_LIBCTF]: Likewise.
View Lorry Controller Status