diff options
Diffstat (limited to 'gdb/remote-array.c')
| -rw-r--r-- | gdb/remote-array.c | 121 |
1 files changed, 37 insertions, 84 deletions
diff --git a/gdb/remote-array.c b/gdb/remote-array.c index fcbddc03790..498c2182027 100644 --- a/gdb/remote-array.c +++ b/gdb/remote-array.c @@ -317,8 +317,7 @@ debuglogs (int level, char *pattern,...) * timeout stuff. */ static int -readchar (timeout) - int timeout; +readchar (int timeout) { int c; @@ -356,9 +355,7 @@ readchar (timeout) * it out. Let the user break out immediately. */ static void -expect (string, discard) - char *string; - int discard; +expect (char *string, int discard) { char *p = string; int c; @@ -407,8 +404,7 @@ expect (string, discard) necessary to prevent getting into states from which we can't recover. */ static void -expect_prompt (discard) - int discard; +expect_prompt (int discard) { expect (ARRAY_PROMPT, discard); } @@ -417,8 +413,7 @@ expect_prompt (discard) * junk -- ignore junk characters. Returns a 1 if junk, 0 otherwise */ static int -junk (ch) - char ch; +junk (char ch) { switch (ch) { @@ -443,8 +438,7 @@ junk (ch) * If ignore is nonzero, ignore spaces, newline & tabs. */ static int -get_hex_digit (ignore) - int ignore; +get_hex_digit (int ignore) { static int ch; while (1) @@ -490,8 +484,7 @@ get_hex_digit (ignore) * Accept any number leading spaces. */ static void -get_hex_byte (byt) - char *byt; +get_hex_byte (char *byt) { int val; @@ -510,7 +503,7 @@ get_hex_byte (byt) * and put them in registers starting at REGNO. */ static int -get_hex_word () +get_hex_word (void) { long val, newval; int i; @@ -540,10 +533,7 @@ get_hex_word () /* This is called not only when we first attach, but also when the user types "run" after having attached. */ static void -array_create_inferior (execfile, args, env) - char *execfile; - char *args; - char **env; +array_create_inferior (char *execfile, char *args, char **env) { int entry_pt; @@ -584,10 +574,7 @@ static int baudrate = 9600; static char dev_name[100]; static void -array_open (args, name, from_tty) - char *args; - char *name; - int from_tty; +array_open (char *args, char *name, int from_tty) { char packet[PBUFSIZ]; @@ -659,8 +646,7 @@ array_open (args, name, from_tty) */ static void -array_close (quitting) - int quitting; +array_close (int quitting) { SERIAL_CLOSE (array_desc); array_desc = NULL; @@ -684,8 +670,7 @@ array_close (quitting) * else with your gdb. */ static void -array_detach (from_tty) - int from_tty; +array_detach (int from_tty) { debuglogs (1, "array_detach ()"); @@ -699,9 +684,7 @@ array_detach (from_tty) * array_attach -- attach GDB to the target. */ static void -array_attach (args, from_tty) - char *args; - int from_tty; +array_attach (char *args, int from_tty) { if (from_tty) printf ("Starting remote %s debugging\n", target_shortname); @@ -717,9 +700,7 @@ array_attach (args, from_tty) * array_resume -- Tell the remote machine to resume. */ static void -array_resume (pid, step, sig) - int pid, step; - enum target_signal sig; +array_resume (int pid, int step, enum target_signal sig) { debuglogs (1, "array_resume (step=%d, sig=%d)", step, sig); @@ -740,9 +721,7 @@ array_resume (pid, step, sig) * storing status in status just as `wait' would. */ static int -array_wait (pid, status) - int pid; - struct target_waitstatus *status; +array_wait (int pid, struct target_waitstatus *status) { int old_timeout = timeout; int result, i; @@ -816,8 +795,7 @@ array_wait (pid, status) * block regs. */ static void -array_fetch_registers (ignored) - int ignored; +array_fetch_registers (int ignored) { int regno, i; char *p; @@ -852,8 +830,7 @@ array_fetch_registers (ignored) * protocol based on GDB's remote protocol. */ static void -array_fetch_register (ignored) - int ignored; +array_fetch_register (int ignored) { array_fetch_registers (); } @@ -862,8 +839,7 @@ array_fetch_register (ignored) * Get all the registers from the targets. They come back in a large array. */ static void -array_store_registers (ignored) - int ignored; +array_store_registers (int ignored) { int regno; unsigned long i; @@ -902,8 +878,7 @@ array_store_registers (ignored) * protocol based on GDB's remote protocol. */ static void -array_store_register (ignored) - int ignored; +array_store_register (int ignored) { array_store_registers (); } @@ -915,13 +890,13 @@ array_store_register (ignored) debugged. */ static void -array_prepare_to_store () +array_prepare_to_store (void) { /* Do nothing, since we can store individual regs */ } static void -array_files_info () +array_files_info (void) { printf ("\tAttached to %s at %d baud.\n", dev_name, baudrate); @@ -932,10 +907,7 @@ array_files_info () * memory at MYADDR to inferior's memory at MEMADDR. Returns length moved. */ static int -array_write_inferior_memory (memaddr, myaddr, len) - CORE_ADDR memaddr; - unsigned char *myaddr; - int len; +array_write_inferior_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len) { unsigned long i; int j; @@ -980,10 +952,7 @@ array_write_inferior_memory (memaddr, myaddr, len) * length moved. */ static int -array_read_inferior_memory (memaddr, myaddr, len) - CORE_ADDR memaddr; - char *myaddr; - int len; +array_read_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len) { int j; char buf[20]; @@ -1067,9 +1036,7 @@ array_xfer_memory (memaddr, myaddr, len, write, target) } static void -array_kill (args, from_tty) - char *args; - int from_tty; +array_kill (char *args, int from_tty) { return; /* ignore attempts to kill target system */ } @@ -1080,7 +1047,7 @@ array_kill (args, from_tty) instructions. */ static void -array_mourn_inferior () +array_mourn_inferior (void) { remove_breakpoints (); generic_mourn_inferior (); /* Do all the proper things now */ @@ -1095,9 +1062,7 @@ static CORE_ADDR breakaddr[MAX_ARRAY_BREAKPOINTS] = * array_insert_breakpoint -- add a breakpoint */ static int -array_insert_breakpoint (addr, shadow) - CORE_ADDR addr; - char *shadow; +array_insert_breakpoint (CORE_ADDR addr, char *shadow) { int i; int bp_size = 0; @@ -1128,9 +1093,7 @@ array_insert_breakpoint (addr, shadow) * _remove_breakpoint -- Tell the monitor to remove a breakpoint */ static int -array_remove_breakpoint (addr, shadow) - CORE_ADDR addr; - char *shadow; +array_remove_breakpoint (CORE_ADDR addr, char *shadow) { int i; @@ -1153,7 +1116,7 @@ array_remove_breakpoint (addr, shadow) } static void -array_stop () +array_stop (void) { debuglogs (1, "array_stop()"); printf_monitor ("\003"); @@ -1166,9 +1129,7 @@ array_stop () * expect_prompt is seen. FIXME */ static void -monitor_command (args, fromtty) - char *args; - int fromtty; +monitor_command (char *args, int fromtty) { debuglogs (1, "monitor_command (args=%s)", args); @@ -1199,8 +1160,7 @@ monitor_command (args, fromtty) * */ static void -make_gdb_packet (buf, data) - char *buf, *data; +make_gdb_packet (char *buf, char *data) { int i; unsigned char csum = 0; @@ -1239,8 +1199,7 @@ make_gdb_packet (buf, data) * successful transmition, or a 0 for a failure. */ static int -array_send_packet (packet) - char *packet; +array_send_packet (char *packet) { int c, retries, i; char junk[PBUFSIZ]; @@ -1338,8 +1297,7 @@ array_send_packet (packet) * packet, or a 0 it the packet wasn't transmitted correctly. */ static int -array_get_packet (packet) - char *packet; +array_get_packet (char *packet) { int c; int retries; @@ -1433,8 +1391,7 @@ array_get_packet (packet) * ascii2hexword -- convert an ascii number represented by 8 digits to a hex value. */ static unsigned long -ascii2hexword (mem) - unsigned char *mem; +ascii2hexword (unsigned char *mem) { unsigned long val; int i; @@ -1462,9 +1419,7 @@ ascii2hexword (mem) * digits. */ static void -hexword2ascii (mem, num) - unsigned char *mem; - unsigned long num; +hexword2ascii (unsigned char *mem, unsigned long num) { int i; unsigned char ch; @@ -1482,8 +1437,7 @@ hexword2ascii (mem, num) /* Convert hex digit A to a number. */ static int -from_hex (a) - int a; +from_hex (int a) { if (a == 0) return 0; @@ -1503,8 +1457,7 @@ from_hex (a) /* Convert number NIB to a hex digit. */ static int -tohex (nib) - int nib; +tohex (int nib) { if (nib < 10) return '0' + nib; @@ -1517,7 +1470,7 @@ tohex (nib) * are usually only used by monitors. */ void -_initialize_remote_monitors () +_initialize_remote_monitors (void) { /* generic monitor command */ add_com ("monitor", class_obscure, monitor_command, @@ -1529,7 +1482,7 @@ _initialize_remote_monitors () * _initialize_array -- do any special init stuff for the target. */ void -_initialize_array () +_initialize_array (void) { init_array_ops (); add_target (&array_ops); |