diff options
Diffstat (limited to 'doc/texinfo.tex')
| -rw-r--r-- | doc/texinfo.tex | 4146 |
1 files changed, 2723 insertions, 1423 deletions
diff --git a/doc/texinfo.tex b/doc/texinfo.tex index e8375a31..c49af9f4 100644 --- a/doc/texinfo.tex +++ b/doc/texinfo.tex @@ -1,51 +1,72 @@ -%% TeX macros to handle texinfo files - -% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, -% 94, 95, 1996 Free Software Foundation, Inc. - -%This texinfo.tex file is free software; you can redistribute it and/or -%modify it under the terms of the GNU General Public License as -%published by the Free Software Foundation; either version 2, or (at -%your option) any later version. - -%This texinfo.tex file is distributed in the hope that it will be -%useful, but WITHOUT ANY WARRANTY; without even the implied warranty -%of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -%General Public License for more details. - -%You should have received a copy of the GNU General Public License -%along with this texinfo.tex file; see the file COPYING. If not, write -%to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -%Boston, MA 02111-1307, USA. - - -%In other words, you are welcome to use, share and improve this program. -%You are forbidden to forbid anyone else to use, share and improve -%what you give them. Help stamp out software-hoarding! - - -% Send bug reports to bug-texinfo@prep.ai.mit.edu. -% Please include a *precise* test case in each bug report. - - -% Make it possible to create a .fmt file just by loading this file: -% if the underlying format is not loaded, start by loading it now. -% Added by gildea November 1993. +% texinfo.tex -- TeX macros to handle Texinfo files. +% +% Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi +% +\def\texinfoversion{1999-09-25.10} +% +% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 +% Free Software Foundation, Inc. +% +% This texinfo.tex file is free software; you can redistribute it and/or +% modify it under the terms of the GNU General Public License as +% published by the Free Software Foundation; either version 2, or (at +% your option) any later version. +% +% This texinfo.tex file is distributed in the hope that it will be +% useful, but WITHOUT ANY WARRANTY; without even the implied warranty +% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +% General Public License for more details. +% +% You should have received a copy of the GNU General Public License +% along with this texinfo.tex file; see the file COPYING. If not, write +% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +% Boston, MA 02111-1307, USA. +% +% In other words, you are welcome to use, share and improve this program. +% You are forbidden to forbid anyone else to use, share and improve +% what you give them. Help stamp out software-hoarding! +% +% Please try the latest version of texinfo.tex before submitting bug +% reports; you can get the latest version from: +% ftp://ftp.gnu.org/gnu/texinfo.tex +% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) +% ftp://texinfo.org/tex/texinfo.tex +% ftp://us.ctan.org/macros/texinfo/texinfo.tex +% (and all CTAN mirrors, finger ctan@us.ctan.org for a list). +% /home/gd/gnu/doc/texinfo.tex on the GNU machines. +% The texinfo.tex in any given Texinfo distribution could well be out +% of date, so if that's what you're using, please check. +% Texinfo has a small home page at http://texinfo.org/. +% +% Send bug reports to bug-texinfo@gnu.org. Please include including a +% complete document in each bug report with which we can reproduce the +% problem. Patches are, of course, greatly appreciated. +% +% To process a Texinfo manual with TeX, it's most reliable to use the +% texi2dvi shell script that comes with the distribution. For a simple +% manual foo.texi, however, you can get away with this: +% tex foo.texi +% texindex foo.?? +% tex foo.texi +% tex foo.texi +% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps. +% The extra runs of TeX get the cross-reference information correct. +% Sometimes one run after texindex suffices, and sometimes you need more +% than two; texi2dvi does it as many times as necessary. +% +% It is possible to adapt texinfo.tex for other languages. You can get +% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/. -% This automatically updates the version number based on RCS. -\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}} -\deftexinfoversion$Revision: 2.185 $ -\message{Loading texinfo package [Version \texinfoversion]:} +\message{Loading texinfo [version \texinfoversion]:} % If in a .fmt file, print the version number % and turn on active characters that we couldn't do earlier because % they might have appeared in the input file name. -\everyjob{\message{[Texinfo version \texinfoversion]}\message{} +\everyjob{\message{[Texinfo version \texinfoversion]}% \catcode`+=\active \catcode`\_=\active} % Save some parts of plain tex whose names we will redefine. - \let\ptexb=\b \let\ptexbullet=\bullet \let\ptexc=\c @@ -53,27 +74,17 @@ \let\ptexdot=\. \let\ptexdots=\dots \let\ptexend=\end -\let\ptexequiv = \equiv +\let\ptexequiv=\equiv +\let\ptexexclam=\! \let\ptexi=\i \let\ptexlbrace=\{ \let\ptexrbrace=\} \let\ptexstar=\* \let\ptext=\t -\let\ptextilde=\~ - -% Be sure we're in horizontal mode when doing a tie, since we make space -% equivalent to this in @example-like environments. Otherwise, a space -% at the beginning of a line will start with \penalty -- and -% since \penalty is valid in vertical mode, we'd end up putting the -% penalty on the vertical list instead of in the new paragraph. -{\catcode`@ = 11 - % Avoid using \@M directly, because that causes trouble - % if the definition is written into an index file. - \global\let\tiepenalty = \@M - \gdef\tie{\leavevmode\penalty\tiepenalty\ } -} -\let\~ = \tie % And make it available as @~. +% We never want plain's outer \+ definition in Texinfo. +% For @tex, we can use \tabalign. +\let\+ = \relax \message{Basics,} \chardef\other=12 @@ -82,18 +93,47 @@ % starts a new line in the output. \newlinechar = `^^J -% Set up fixed words for English. -\ifx\putwordChapter\undefined{\gdef\putwordChapter{Chapter}}\fi% -\def\putwordInfo{Info}% -\ifx\putwordSee\undefined{\gdef\putwordSee{See}}\fi% -\ifx\putwordsee\undefined{\gdef\putwordsee{see}}\fi% -\ifx\putwordfile\undefined{\gdef\putwordfile{file}}\fi% -\ifx\putwordpage\undefined{\gdef\putwordpage{page}}\fi% -\ifx\putwordsection\undefined{\gdef\putwordsection{section}}\fi% -\ifx\putwordSection\undefined{\gdef\putwordSection{Section}}\fi% -\ifx\putwordTableofContents\undefined{\gdef\putwordTableofContents{Table of Contents}}\fi% -\ifx\putwordShortContents\undefined{\gdef\putwordShortContents{Short Contents}}\fi% -\ifx\putwordAppendix\undefined{\gdef\putwordAppendix{Appendix}}\fi% +% Set up fixed words for English if not already set. +\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi +\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi +\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi +\ifx\putwordin\undefined \gdef\putwordin{in}\fi +\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi +\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi +\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi +\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi +\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi +\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi +\ifx\putwordof\undefined \gdef\putwordof{of}\fi +\ifx\putwordon\undefined \gdef\putwordon{on}\fi +\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi +\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi +\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi +\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi +\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi +\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi +\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi +% +\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi +\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi +\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi +\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi +\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi +\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi +\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi +\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi +\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi +\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi +\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi +\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi +% +\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi +\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi +\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi +\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi +\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi +\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi +\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi % Ignore a token. % @@ -102,10 +142,11 @@ \hyphenation{ap-pen-dix} \hyphenation{mini-buf-fer mini-buf-fers} \hyphenation{eshell} +\hyphenation{white-space} % Margin to add to right of even pages, to left of odd pages. -\newdimen \bindingoffset -\newdimen \normaloffset +\newdimen \bindingoffset +\newdimen \normaloffset \newdimen\pagewidth \newdimen\pageheight % Sometimes it is convenient to have everything in the transcript file @@ -113,87 +154,119 @@ % since that produces some useless output on the terminal. % \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% +\ifx\eTeXversion\undefined \def\loggingall{\tracingcommands2 \tracingstats2 \tracingpages1 \tracingoutput1 \tracinglostchars1 \tracingmacros2 \tracingparagraphs1 \tracingrestores1 \showboxbreadth\maxdimen\showboxdepth\maxdimen }% +\else +\def\loggingall{\tracingcommands3 \tracingstats2 + \tracingpages1 \tracingoutput1 \tracinglostchars1 + \tracingmacros2 \tracingparagraphs1 \tracingrestores1 + \tracingscantokens1 \tracingassigns1 \tracingifs1 + \tracinggroups1 \tracingnesting2 + \showboxbreadth\maxdimen\showboxdepth\maxdimen +}% +\fi -%---------------------Begin change----------------------- +% For @cropmarks command. +% Do @cropmarks to get crop marks. % -%%%% For @cropmarks command. -% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986 +\newif\ifcropmarks +\let\cropmarks = \cropmarkstrue % -\newdimen\cornerlong \newdimen\cornerthick -\newdimen \topandbottommargin -\newdimen \outerhsize \newdimen \outervsize -\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks -\outerhsize=7in -%\outervsize=9.5in -% Alternative @smallbook page size is 9.25in -\outervsize=9.25in -\topandbottommargin=.75in +% Dimensions to add cropmarks at corners. +% Added by P. A. MacKay, 12 Nov. 1986 % -%---------------------End change----------------------- +\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines +\newdimen\cornerlong \cornerlong=1pc +\newdimen\cornerthick \cornerthick=.3pt +\newdimen\topandbottommargin \topandbottommargin=.75in + +% Main output routine. +\chardef\PAGE = 255 +\output = {\onepageout{\pagecontents\PAGE}} + +\newbox\headlinebox +\newbox\footlinebox % \onepageout takes a vbox as an argument. Note that \pagecontents % does insertions, but you have to call it yourself. -\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}} \def\onepageout#1{% - \hoffset=\normaloffset + \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi + % \ifodd\pageno \advance\hoffset by \bindingoffset \else \advance\hoffset by -\bindingoffset\fi + % + % Do this outside of the \shipout so @code etc. will be expanded in + % the headline as they should be, not taken literally (outputting ''code). + \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% + \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% + % {% - \escapechar = `\\ % use backslash in output files. - \indexdummies + % Have to do this stuff outside the \shipout because we want it to + % take effect in \write's, yet the group defined by the \vbox ends + % before the \shipout runs. + % + \escapechar = `\\ % use backslash in output files. + \indexdummies % don't expand commands in the output. + \normalturnoffactive % \ in index entries must not stay \, e.g., if + % the page break happens to be in the middle of an example. \shipout\vbox{% - {\let\hsize=\pagewidth \makeheadline}% + \ifcropmarks \vbox to \outervsize\bgroup + \hsize = \outerhsize + \vskip-\topandbottommargin + \vtop to0pt{% + \line{\ewtop\hfil\ewtop}% + \nointerlineskip + \line{% + \vbox{\moveleft\cornerthick\nstop}% + \hfill + \vbox{\moveright\cornerthick\nstop}% + }% + \vss}% + \vskip\topandbottommargin + \line\bgroup + \hfil % center the page within the outer (page) hsize. + \ifodd\pageno\hskip\bindingoffset\fi + \vbox\bgroup + \fi + % + \unvbox\headlinebox \pagebody{#1}% - {\let\hsize=\pagewidth \makefootline}% - }% - }% + \ifdim\ht\footlinebox > 0pt + % Only leave this space if the footline is nonempty. + % (We lessened \vsize for it in \oddfootingxxx.) + % The \baselineskip=24pt in plain's \makefootline has no effect. + \vskip 2\baselineskip + \unvbox\footlinebox + \fi + % + \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi + % + \ifcropmarks + \egroup % end of \vbox\bgroup + \hfil\egroup % end of (centering) \line\bgroup + \vskip\topandbottommargin plus1fill minus1fill + \boxmaxdepth = \cornerthick + \vbox to0pt{\vss + \line{% + \vbox{\moveleft\cornerthick\nsbot}% + \hfill + \vbox{\moveright\cornerthick\nsbot}% + }% + \nointerlineskip + \line{\ewbot\hfil\ewbot}% + }% + \egroup % \vbox from first cropmarks clause + \fi + }% end of \shipout\vbox + }% end of group with \turnoffactive \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi } -%%%% For @cropmarks command %%%% - -% Here is a modification of the main output routine for Near East Publications -% This provides right-angle cropmarks at all four corners. -% The contents of the page are centerlined into the cropmarks, -% and any desired binding offset is added as an \hskip on either -% site of the centerlined box. (P. A. MacKay, 12 November, 1986) -% -\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up -{\escapechar=`\\\relax % makes sure backslash is used in output files. - \shipout - \vbox to \outervsize{\hsize=\outerhsize - \vbox{\line{\ewtop\hfill\ewtop}} - \nointerlineskip - \line{\vbox{\moveleft\cornerthick\nstop} - \hfill - \vbox{\moveright\cornerthick\nstop}} - \vskip \topandbottommargin - \centerline{\ifodd\pageno\hskip\bindingoffset\fi - \vbox{ - {\let\hsize=\pagewidth \makeheadline} - \pagebody{#1} - {\let\hsize=\pagewidth \makefootline}} - \ifodd\pageno\else\hskip\bindingoffset\fi} - \vskip \topandbottommargin plus1fill minus1fill - \boxmaxdepth\cornerthick - \line{\vbox{\moveleft\cornerthick\nsbot} - \hfill - \vbox{\moveright\cornerthick\nsbot}} - \nointerlineskip - \vbox{\line{\ewbot\hfill\ewbot}} - }} - \advancepageno - \ifnum\outputpenalty>-20000 \else\dosupereject\fi} -% -% Do @cropmarks to get crop marks -\def\cropmarks{\let\onepageout=\croppageout } - \newinsert\margin \dimen\margin=\maxdimen \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} @@ -207,7 +280,6 @@ \ifr@ggedbottom \kern-\dimen@ \vfil \fi} } -% % Here are the rules for the cropmarks. Note that they are % offset so that the space between them is truly \outerhsize or \outervsize % (P. A. MacKay, 12 November, 1986) @@ -302,11 +374,11 @@ %% Call \inENV within environments (after a \begingroup) \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} \def\ENVcheck{% -\ifENV\errmessage{Still within an environment. Type Return to continue.} +\ifENV\errmessage{Still within an environment; press RETURN to continue} \endgroup\fi} % This is not perfect, but it should reduce lossage % @begin foo is the same as @foo, for now. -\newhelp\EMsimple{Type <Return> to continue.} +\newhelp\EMsimple{Press RETURN to continue.} \outer\def\begin{\parsearg\beginxxx} @@ -365,7 +437,7 @@ % @@ prints an @ % Kludge this until the fonts are right (grr). -\def\@{{\tt \char '100}} +\def\@{{\tt\char64}} % This is turned off because it was never documented % and you can use @w{...} around a quote to suppress ligatures. @@ -375,8 +447,8 @@ %\def\'{{'}} % Used to generate quoted braces. -\def\mylbrace {{\tt \char '173}} -\def\myrbrace {{\tt \char '175}} +\def\mylbrace {{\tt\char123}} +\def\myrbrace {{\tt\char125}} \let\{=\mylbrace \let\}=\myrbrace \begingroup @@ -413,6 +485,18 @@ \fi\fi } +% Be sure we're in horizontal mode when doing a tie, since we make space +% equivalent to this in @example-like environments. Otherwise, a space +% at the beginning of a line will start with \penalty -- and +% since \penalty is valid in vertical mode, we'd end up putting the +% penalty on the vertical list instead of in the new paragraph. +{\catcode`@ = 11 + % Avoid using \@M directly, because that causes trouble + % if the definition is written into an index file. + \global\let\tiepenalty = \@M + \gdef\tie{\leavevmode\penalty\tiepenalty\ } +} + % @: forces normal size whitespace following. \def\:{\spacefactor=1000 } @@ -422,14 +506,11 @@ % @. is an end-of-sentence period. \def\.{.\spacefactor=3000 } -% @enddots{} is an end-of-sentence ellipsis. -\gdef\enddots{$\mathinner{\ldotp\ldotp\ldotp\ldotp}$\spacefactor=3000} - % @! is an end-of-sentence bang. -\gdef\!{!\spacefactor=3000 } +\def\!{!\spacefactor=3000 } % @? is an end-of-sentence query. -\gdef\?{?\spacefactor=3000 } +\def\?{?\spacefactor=3000 } % @w prevents a word break. Without the \leavevmode, @w at the % beginning of a paragraph, when TeX is still in vertical mode, would @@ -513,53 +594,81 @@ where each line of input produces a line of output.} %% This method tries to make TeX break the page naturally %% if the depth of the box does not fit. %{\baselineskip=0pt% -%\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000 +%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak %\prevdepth=-1000pt %}} \def\needx#1{% - % Go into vertical mode, so we don't make a big box in the middle of a + % Ensure vertical mode, so we don't make a big box in the middle of a % paragraph. \par % - % Don't add any leading before our big empty box, but allow a page - % break, since the best break might be right here. - \allowbreak - \nointerlineskip - \vtop to #1\mil{\vfil}% - % - % TeX does not even consider page breaks if a penalty added to the - % main vertical list is 10000 or more. But in order to see if the - % empty box we just added fits on the page, we must make it consider - % page breaks. On the other hand, we don't want to actually break the - % page after the empty box. So we use a penalty of 9999. - % - % There is an extremely small chance that TeX will actually break the - % page at this \penalty, if there are no other feasible breakpoints in - % sight. (If the user is using lots of big @group commands, which - % almost-but-not-quite fill up a page, TeX will have a hard time doing - % good page breaking, for example.) However, I could not construct an - % example where a page broke at this \penalty; if it happens in a real - % document, then we can reconsider our strategy. - \penalty9999 - % - % Back up by the size of the box, whether we did a page break or not. - \kern -#1\mil - % - % Do not allow a page break right after this kern. - \nobreak + % If the @need value is less than one line space, it's useless. + \dimen0 = #1\mil + \dimen2 = \ht\strutbox + \advance\dimen2 by \dp\strutbox + \ifdim\dimen0 > \dimen2 + % + % Do a \strut just to make the height of this box be normal, so the + % normal leading is inserted relative to the preceding line. + % And a page break here is fine. + \vtop to #1\mil{\strut\vfil}% + % + % TeX does not even consider page breaks if a penalty added to the + % main vertical list is 10000 or more. But in order to see if the + % empty box we just added fits on the page, we must make it consider + % page breaks. On the other hand, we don't want to actually break the + % page after the empty box. So we use a penalty of 9999. + % + % There is an extremely small chance that TeX will actually break the + % page at this \penalty, if there are no other feasible breakpoints in + % sight. (If the user is using lots of big @group commands, which + % almost-but-not-quite fill up a page, TeX will have a hard time doing + % good page breaking, for example.) However, I could not construct an + % example where a page broke at this \penalty; if it happens in a real + % document, then we can reconsider our strategy. + \penalty9999 + % + % Back up by the size of the box, whether we did a page break or not. + \kern -#1\mil + % + % Do not allow a page break right after this kern. + \nobreak + \fi } % @br forces paragraph break \let\br = \par -% @dots{} output some dots +% @dots{} output an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in a typewriter +% font as three actual period characters. +% +\def\dots{% + \leavevmode + \hbox to 1.5em{% + \hskip 0pt plus 0.25fil minus 0.25fil + .\hss.\hss.% + \hskip 0pt plus 0.5fil minus 0.5fil + }% +} -\def\dots{$\ldots$} +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \leavevmode + \hbox to 2em{% + \hskip 0pt plus 0.25fil minus 0.25fil + .\hss.\hss.\hss.% + \hskip 0pt plus 0.5fil minus 0.5fil + }% + \spacefactor=3000 +} -% @page forces the start of a new page +% @page forces the start of a new page +% \def\page{\par\vfill\supereject} % @exdent text.... @@ -626,314 +735,50 @@ where each line of input produces a line of output.} % @c is the same as @comment % @ignore ... @end ignore is another way to write a comment -\def\comment{\catcode 64=\other \catcode 123=\other \catcode 125=\other% -\parsearg \commentxxx} - -\def\commentxxx #1{\catcode 64=0 \catcode 123=1 \catcode 125=2 } +\def\comment{\begingroup \catcode`\^^M=\other% +\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% +\commentxxx} +{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} \let\c=\comment -% @paragraphindent is defined for the Info formatting commands only. -\let\paragraphindent=\comment - -% Prevent errors for section commands. -% Used in @ignore and in failing conditionals. -\def\ignoresections{% -\let\chapter=\relax -\let\unnumbered=\relax -\let\top=\relax -\let\unnumberedsec=\relax -\let\unnumberedsection=\relax -\let\unnumberedsubsec=\relax -\let\unnumberedsubsection=\relax -\let\unnumberedsubsubsec=\relax -\let\unnumberedsubsubsection=\relax -\let\section=\relax -\let\subsec=\relax -\let\subsubsec=\relax -\let\subsection=\relax -\let\subsubsection=\relax -\let\appendix=\relax -\let\appendixsec=\relax -\let\appendixsection=\relax -\let\appendixsubsec=\relax -\let\appendixsubsection=\relax -\let\appendixsubsubsec=\relax -\let\appendixsubsubsection=\relax -\let\contents=\relax -\let\smallbook=\relax -\let\titlepage=\relax -} - -% Used in nested conditionals, where we have to parse the Texinfo source -% and so want to turn off most commands, in case they are used -% incorrectly. -% -\def\ignoremorecommands{% - \let\defcodeindex = \relax - \let\defcv = \relax - \let\deffn = \relax - \let\deffnx = \relax - \let\defindex = \relax - \let\defivar = \relax - \let\defmac = \relax - \let\defmethod = \relax - \let\defop = \relax - \let\defopt = \relax - \let\defspec = \relax - \let\deftp = \relax - \let\deftypefn = \relax - \let\deftypefun = \relax - \let\deftypevar = \relax - \let\deftypevr = \relax - \let\defun = \relax - \let\defvar = \relax - \let\defvr = \relax - \let\ref = \relax - \let\xref = \relax - \let\printindex = \relax - \let\pxref = \relax - \let\settitle = \relax - \let\setchapternewpage = \relax - \let\setchapterstyle = \relax - \let\everyheading = \relax - \let\evenheading = \relax - \let\oddheading = \relax - \let\everyfooting = \relax - \let\evenfooting = \relax - \let\oddfooting = \relax - \let\headings = \relax - \let\include = \relax - \let\lowersections = \relax - \let\down = \relax - \let\raisesections = \relax - \let\up = \relax - \let\set = \relax - \let\clear = \relax - \let\item = \relax -} - -% Ignore @ignore ... @end ignore. -% -\def\ignore{\doignore{ignore}} - -% Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text. -% -\def\ifinfo{\doignore{ifinfo}} -\def\ifhtml{\doignore{ifhtml}} -\def\html{\doignore{html}} -\def\menu{\doignore{menu}} -\def\direntry{\doignore{direntry}} - -% Also ignore @macro ... @end macro. The user must run texi2dvi, -% which runs makeinfo to do macro expansion. Ignore @unmacro, too. -\def\macro{\doignore{macro}} -\let\unmacro = \comment - - -% @dircategory CATEGORY -- specify a category of the dir file -% which this file should belong to. Ignore this in TeX. -\let\dircategory = \comment - -% Ignore text until a line `@end #1'. -% -\def\doignore#1{\begingroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define a command to swallow text until we reach `@end #1'. - \long\def\doignoretext##1\end #1{\enddoignore}% - % - % Make sure that spaces turn into tokens that match what \doignoretext wants. - \catcode32 = 10 - % - % And now expand that command. - \doignoretext -} - -% What we do to finish off ignored text. -% -\def\enddoignore{\endgroup\ignorespaces}% - -\newif\ifwarnedobs\warnedobsfalse -\def\obstexwarn{% - \ifwarnedobs\relax\else - % We need to warn folks that they may have trouble with TeX 3.0. - % This uses \immediate\write16 rather than \message to get newlines. - \immediate\write16{} - \immediate\write16{***WARNING*** for users of Unix TeX 3.0!} - \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} - \immediate\write16{If you are running another version of TeX, relax.} - \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} - \immediate\write16{ Then upgrade your TeX installation if you can.} - \immediate\write16{ (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)} - \immediate\write16{If you are stuck with version 3.0, run the} - \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} - \immediate\write16{ to use a workaround.} - \immediate\write16{} - \global\warnedobstrue - \fi -} - -% **In TeX 3.0, setting text in \nullfont hangs tex. For a -% workaround (which requires the file ``dummy.tfm'' to be installed), -% uncomment the following line: -%%%%%\font\nullfont=dummy\let\obstexwarn=\relax - -% Ignore text, except that we keep track of conditional commands for -% purposes of nesting, up to an `@end #1' command. -% -\def\nestedignore#1{% - \obstexwarn - % We must actually expand the ignored text to look for the @end - % command, so that nested ignore constructs work. Thus, we put the - % text into a \vbox and then do nothing with the result. To minimize - % the change of memory overflow, we follow the approach outlined on - % page 401 of the TeXbook: make the current font be a dummy font. - % - \setbox0 = \vbox\bgroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define `@end #1' to end the box, which will in turn undefine the - % @end command again. - \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% - % - % We are going to be parsing Texinfo commands. Most cause no - % trouble when they are used incorrectly, but some commands do - % complicated argument parsing or otherwise get confused, so we - % undefine them. - % - % We can't do anything about stray @-signs, unfortunately; - % they'll produce `undefined control sequence' errors. - \ignoremorecommands - % - % Set the current font to be \nullfont, a TeX primitive, and define - % all the font commands to also use \nullfont. We don't use - % dummy.tfm, as suggested in the TeXbook, because not all sites - % might have that installed. Therefore, math mode will still - % produce output, but that should be an extremely small amount of - % stuff compared to the main input. - % - \nullfont - \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont - \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont - \let\tensf = \nullfont - % Similarly for index fonts (mostly for their use in - % smallexample) - \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont - \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont - \let\indsf = \nullfont - % - % Don't complain when characters are missing from the fonts. - \tracinglostchars = 0 - % - % Don't bother to do space factor calculations. - \frenchspacing - % - % Don't report underfull hboxes. - \hbadness = 10000 - % - % Do minimal line-breaking. - \pretolerance = 10000 - % - % Do not execute instructions in @tex - \def\tex{\doignore{tex}} -} - -% @set VAR sets the variable VAR to an empty value. -% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. -% -% Since we want to separate VAR from REST-OF-LINE (which might be -% empty), we can't just use \parsearg; we have to insert a space of our -% own to delimit the rest of the line, and then take it out again if we -% didn't need it. Make sure the catcode of space is correct to avoid -% losing inside @example, for instance. -% -\def\set{\begingroup\catcode` =10 \parsearg\setxxx} -\def\setxxx#1{\setyyy#1 \endsetyyy} -\def\setyyy#1 #2\endsetyyy{% - \def\temp{#2}% - \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty - \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. - \fi - \endgroup -} -% Can't use \xdef to pre-expand #2 and save some time, since \temp or -% \next or other control sequences that we've defined might get us into -% an infinite loop. Consider `@set foo @cite{bar}'. -\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} - -% @clear VAR clears (i.e., unsets) the variable VAR. -% -\def\clear{\parsearg\clearxxx} -\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} - -% @value{foo} gets the text saved in variable foo. -% -\def\value#1{\expandafter - \ifx\csname SET#1\endcsname\relax - {\{No value for ``#1''\}} - \else \csname SET#1\endcsname \fi} - -% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined -% with @set. +% @paragraphindent NCHARS +% We'll use ems for NCHARS, close enough. +% We cannot implement @paragraphindent asis, though. +% +\def\asisword{asis} % no translation, these are keywords +\def\noneword{none} % -\def\ifset{\parsearg\ifsetxxx} -\def\ifsetxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifsetfail +\def\paragraphindent{\parsearg\doparagraphindent} +\def\doparagraphindent#1{% + \def\temp{#1}% + \ifx\temp\asisword \else - \expandafter\ifsetsucceed + \ifx\temp\noneword + \defaultparindent = 0pt + \else + \defaultparindent = #1em + \fi \fi + \parindent = \defaultparindent } -\def\ifsetsucceed{\conditionalsucceed{ifset}} -\def\ifsetfail{\nestedignore{ifset}} -\defineunmatchedend{ifset} -% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been -% defined with @set, or has been undefined with @clear. -% -\def\ifclear{\parsearg\ifclearxxx} -\def\ifclearxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifclearsucceed +% @exampleindent NCHARS +% We'll use ems for NCHARS like @paragraphindent. +% It seems @exampleindent asis isn't necessary, but +% I preserve it to make it similar to @paragraphindent. +\def\exampleindent{\parsearg\doexampleindent} +\def\doexampleindent#1{% + \def\temp{#1}% + \ifx\temp\asisword \else - \expandafter\ifclearfail + \ifx\temp\noneword + \lispnarrowing = 0pt + \else + \lispnarrowing = #1em + \fi \fi } -\def\ifclearsucceed{\conditionalsucceed{ifclear}} -\def\ifclearfail{\nestedignore{ifclear}} -\defineunmatchedend{ifclear} - -% @iftex always succeeds; we read the text following, through @end -% iftex). But `@end iftex' should be valid only after an @iftex. -% -\def\iftex{\conditionalsucceed{iftex}} -\defineunmatchedend{iftex} - -% We can't just want to start a group at @iftex (for example) and end it -% at @end iftex, since then @set commands inside the conditional have no -% effect (they'd get reverted at the end of the group). So we must -% define \Eiftex to redefine itself to be its previous value. (We can't -% just define it to fail again with an ``unmatched end'' error, since -% the @ifset might be nested.) -% -\def\conditionalsucceed#1{% - \edef\temp{% - % Remember the current value of \E#1. - \let\nece{prevE#1} = \nece{E#1}% - % - % At the `@end #1', redefine \E#1 to be its previous value. - \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% - }% - \temp -} - -% We need to expand lots of \csname's, but we don't want to expand the -% control sequences after we've constructed them. -% -\def\nece#1{\expandafter\noexpand\csname#1\endcsname} % @asis just yields its argument. Used with @table, for example. % @@ -956,63 +801,229 @@ where each line of input produces a line of output.} \def\bullet{\implicitmath\ptexbullet\implicitmath} \def\minus{\implicitmath-\implicitmath} -\def\node{\ENVcheck\parsearg\nodezzz} -\def\nodezzz#1{\nodexxx [#1,]} -\def\nodexxx[#1,#2]{\gdef\lastnode{#1}} -\let\nwnode=\node -\let\lastnode=\relax - -\def\donoderef{\ifx\lastnode\relax\else -\expandafter\expandafter\expandafter\setref{\lastnode}\fi -\global\let\lastnode=\relax} - -\def\unnumbnoderef{\ifx\lastnode\relax\else -\expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi -\global\let\lastnode=\relax} - -\def\appendixnoderef{\ifx\lastnode\relax\else -\expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi -\global\let\lastnode=\relax} - % @refill is a no-op. \let\refill=\relax +% If working on a large document in chapters, it is convenient to +% be able to disable indexing, cross-referencing, and contents, for test runs. +% This is done with @novalidate (before @setfilename). +% +\newif\iflinks \linkstrue % by default we want the aux files. +\let\novalidate = \linksfalse + % @setfilename is done at the beginning of every texinfo file. % So open here the files we need to have open while reading the input. % This makes it possible to make a .fmt file for texinfo. \def\setfilename{% - \readauxfile - \opencontents + \iflinks + \readauxfile + \fi % \openindices needs to do some work in any case. \openindices \fixbackslash % Turn off hack to swallow `\input texinfo'. \global\let\setfilename=\comment % Ignore extra @setfilename cmds. + % + % If texinfo.cnf is present on the system, read it. + % Useful for site-wide @afourpaper, etc. + % Just to be on the safe side, close the input stream before the \input. + \openin 1 texinfo.cnf + \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi + \closein1 + \temp + % \comment % Ignore the actual filename. } +% Called from \setfilename. +% +\def\openindices{% + \newindex{cp}% + \newcodeindex{fn}% + \newcodeindex{vr}% + \newcodeindex{tp}% + \newcodeindex{ky}% + \newcodeindex{pg}% +} + % @bye. \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} -% \def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx} -% \def\macroxxx#1#2 \end macro{% -% \expandafter\gdef\macrotemp#1{#2}% -% \endgroup} -%\def\linemacro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\linemacroxxx} -%\def\linemacroxxx#1#2 \end linemacro{% -%\let\parsearg=\relax -%\edef\macrotempx{\csname M\butfirst\expandafter\string\macrotemp\endcsname}% -%\expandafter\xdef\macrotemp{\parsearg\macrotempx}% -%\expandafter\gdef\macrotempx#1{#2}% -%\endgroup} - -%\def\butfirst#1{} +\message{pdf,} +% adobe `portable' document format +\newcount\tempnum +\newcount\lnkcount +\newtoks\filename +\newcount\filenamelength +\newcount\pgn +\newtoks\toksA +\newtoks\toksB +\newtoks\toksC +\newtoks\toksD +\newbox\boxA +\newcount\countA +\newif\ifpdf +\newif\ifpdfmakepagedest + +\ifx\pdfoutput\undefined + \pdffalse + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\linkcolor = \relax + \let\pdfmakeoutlines = \relax +\else + \pdftrue + \pdfoutput = 1 + \input pdfcolor + \def\dopdfimage#1#2#3{% + \def\imagewidth{#2}% + \def\imageheight{#3}% + \ifnum\pdftexversion < 14 + \pdfimage + \else + \pdfximage + \fi + \ifx\empty\imagewidth\else width \imagewidth \fi + \ifx\empty\imageheight\else height \imageheight \fi + {#1.pdf}% + \ifnum\pdftexversion < 14 \else + \pdfrefximage \pdflastximage + \fi} + \def\pdfmkdest#1{\pdfdest name{#1@} xyz} + \def\pdfmkpgn#1{#1@} + \let\linkcolor = \Cyan + \def\endlink{\Black\pdfendlink} + % Adding outlines to PDF; macros for calculating structure of outlines + % come from Petr Olsak + \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% + \else \csname#1\endcsname \fi} + \def\advancenumber#1{\tempnum=\expnumber{#1}\relax + \advance\tempnum by1 + \expandafter\xdef\csname#1\endcsname{\the\tempnum}} + \def\pdfmakeoutlines{{% + \openin 1 \jobname.toc + \ifeof 1\else\bgroup + \closein 1 + \indexnofonts + \def\tt{} + % thanh's hack / proper braces in bookmarks + \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace + \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace + % + \def\chapentry ##1##2##3{} + \def\unnumbchapentry ##1##2{} + \def\secentry ##1##2##3##4{\advancenumber{chap##2}} + \def\unnumbsecentry ##1##2{} + \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}} + \def\unnumbsubsecentry ##1##2{} + \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}} + \def\unnumbsubsubsecentry ##1##2{} + \input \jobname.toc + \def\chapentry ##1##2##3{% + \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}} + \def\unnumbchapentry ##1##2{% + \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \def\secentry ##1##2##3##4{% + \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}} + \def\unnumbsecentry ##1##2{% + \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \def\subsecentry ##1##2##3##4##5{% + \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}} + \def\unnumbsubsecentry ##1##2{% + \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \def\subsubsecentry ##1##2##3##4##5##6{% + \pdfoutline goto name{\pdfmkpgn{##6}}{##1}} + \def\unnumbsubsubsecentry ##1##2{% + \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \input \jobname.toc + \egroup\fi + }} + \def\makelinks #1,{% + \def\params{#1}\def\E{END}% + \ifx\params\E + \let\nextmakelinks=\relax + \else + \let\nextmakelinks=\makelinks + \ifnum\lnkcount>0,\fi + \picknum{#1}% + \startlink attr{/Border [0 0 0]} + goto name{\pdfmkpgn{\the\pgn}}% + \linkcolor #1% + \advance\lnkcount by 1% + \endlink + \fi + \nextmakelinks + } + \def\picknum#1{\expandafter\pn#1} + \def\pn#1{% + \def\p{#1}% + \ifx\p\lbrace + \let\nextpn=\ppn + \else + \let\nextpn=\ppnn + \def\first{#1} + \fi + \nextpn + } + \def\ppn#1{\pgn=#1\gobble} + \def\ppnn{\pgn=\first} + \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + \def\skipspaces#1{\def\PP{#1}\def\D{|}% + \ifx\PP\D\let\nextsp\relax + \else\let\nextsp\skipspaces + \ifx\p\space\else\addtokens{\filename}{\PP}% + \advance\filenamelength by 1 + \fi + \fi + \nextsp} + \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} + \ifnum\pdftexversion < 14 + \let \startlink \pdfannotlink + \else + \let \startlink \pdfstartlink + \fi + \def\pdfurl#1{% + \begingroup + \normalturnoffactive\def\@{@}% + \leavevmode\Red + \startlink attr{/Border [0 0 0]}% + user{/Subtype /Link /A << /S /URI /URI (#1) >>}% + % #1 + \endgroup} + \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} + \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} + \def\maketoks{% + \expandafter\poptoks\the\toksA|ENDTOKS| + \ifx\first0\adn0 + \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 + \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 + \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 + \else + \ifnum0=\countA\else\makelink\fi + \ifx\first.\let\next=\done\else + \let\next=\maketoks + \addtokens{\toksB}{\the\toksD} + \ifx\first,\addtokens{\toksB}{\space}\fi + \fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \next} + \def\makelink{\addtokens{\toksB}% + {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} + \def\pdflink#1{% + \startlink attr{/Border [0 0 0]} goto name{\mkpgn{#1}} + \linkcolor #1\endlink} + \def\mkpgn#1{#1@} + \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} +\fi % \ifx\pdfoutput \message{fonts,} - % Font-change commands. -% Texinfo supports the sans serif font style, which plain TeX does not. +% Texinfo sort of supports the sans serif font style, which plain TeX does not. % So we set up a \sf analogous to plain's \rm, etc. \newfam\sffam \def\sf{\fam=\sffam \tensf} @@ -1021,8 +1032,9 @@ where each line of input produces a line of output.} % We don't need math for this one. \def\ttsl{\tenttsl} -%% Try out Computer Modern fonts at \magstephalf -\let\mainmagstep=\magstephalf +% Use Computer Modern fonts at \magstephalf (11pt). +\newcount\mainmagstep +\mainmagstep=\magstephalf % Set the font macro #1 to the font named #2, adding on the % specified font prefix (normally `cm'). @@ -1077,22 +1089,30 @@ where each line of input produces a line of output.} \setfont\deftt\ttshape{10}{\magstep1} \def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf} -% Fonts for indices and small examples (9pt). -% We actually use the slanted font rather than the italic, -% because texinfo normally uses the slanted fonts for that. -% Do not make many font distinctions in general in the index, since they -% aren't very useful. -\setfont\ninett\ttshape{9}{1000} -\setfont\indrm\rmshape{9}{1000} -\setfont\indit\slshape{9}{1000} -\let\indsl=\indit -\let\indtt=\ninett -\let\indttsl=\ninett -\let\indsf=\indrm -\let\indbf=\indrm -\setfont\indsc\scshape{10}{900} -\font\indi=cmmi9 -\font\indsy=cmsy9 +% Fonts for indices, footnotes, small examples (9pt). +\setfont\smallrm\rmshape{9}{1000} +\setfont\smalltt\ttshape{9}{1000} +\setfont\smallbf\bfshape{10}{900} +\setfont\smallit\itshape{9}{1000} +\setfont\smallsl\slshape{9}{1000} +\setfont\smallsf\sfshape{9}{1000} +\setfont\smallsc\scshape{10}{900} +\setfont\smallttsl\ttslshape{10}{900} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 + +% Fonts for title page: +\setfont\titlerm\rmbshape{12}{\magstep3} +\setfont\titleit\itbshape{10}{\magstep4} +\setfont\titlesl\slbshape{10}{\magstep4} +\setfont\titlett\ttbshape{12}{\magstep3} +\setfont\titlettsl\ttslshape{10}{\magstep4} +\setfont\titlesf\sfbshape{17}{\magstep1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\authorrm{\secrm} % Chapter (and unnumbered) fonts (17.28pt). \setfont\chaprm\rmbshape{12}{\magstep2} @@ -1100,7 +1120,7 @@ where each line of input produces a line of output.} \setfont\chapsl\slbshape{10}{\magstep3} \setfont\chaptt\ttbshape{12}{\magstep2} \setfont\chapttsl\ttslshape{10}{\magstep3} -\setfont\chapsf\sfbshape{12}{\magstep2} +\setfont\chapsf\sfbshape{17}{1000} \let\chapbf=\chaprm \setfont\chapsc\scbshape{10}{\magstep3} \font\chapi=cmmi12 scaled \magstep2 @@ -1137,19 +1157,15 @@ where each line of input produces a line of output.} \setfont\ssecit\itbshape{10}{1315} \setfont\ssecsl\slbshape{10}{1315} \setfont\ssectt\ttbshape{12}{\magstephalf} -\setfont\ssecttsl\ttslshape{10}{\magstep1} +\setfont\ssecttsl\ttslshape{10}{1315} \setfont\ssecsf\sfbshape{12}{\magstephalf} \let\ssecbf\ssecrm \setfont\ssecsc\scbshape{10}{\magstep1} \font\sseci=cmmi12 scaled \magstephalf -\font\ssecsy=cmsy10 scaled \magstep1 +\font\ssecsy=cmsy10 scaled 1315 % The smallcaps and symbol fonts should actually be scaled \magstep1.5, % but that is not a standard magnification. -% Fonts for title page: -\setfont\titlerm\rmbshape{12}{\magstep3} -\let\authorrm = \secrm - % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. Since % texinfo doesn't allow for producing subscripts and superscripts, we @@ -1174,6 +1190,13 @@ where each line of input produces a line of output.} \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl \resetmathfonts} +\def\titlefonts{% + \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl + \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc + \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy + \let\tenttsl=\titlettsl + \resetmathfonts \setleading{25pt}} +\def\titlefont#1{{\titlefonts\rm #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc @@ -1190,16 +1213,21 @@ where each line of input produces a line of output.} \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl \resetmathfonts \setleading{15pt}} \let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf? -\def\indexfonts{% - \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl - \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc - \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl - \resetmathfonts \setleading{12pt}} +\def\smallfonts{% + \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl + \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc + \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy + \let\tenttsl=\smallttsl + \resetmathfonts \setleading{11pt}} % Set up the default fonts, so we can use them for creating boxes. % \textfonts +% Define these so they can be easily changed for other fonts. +\def\angleleft{$\langle$} +\def\angleright{$\rangle$} + % Count depth in font-changes, for error checks \newcount\fontdepth \fontdepth=0 @@ -1214,13 +1242,14 @@ where each line of input produces a line of output.} % \smartitalic{ARG} outputs arg in italics, followed by an italic correction % unless the following character is such as not to need one. \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi} -\def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx} +\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx} +\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx} \let\i=\smartitalic -\let\var=\smartitalic -\let\dfn=\smartitalic +\let\var=\smartslanted +\let\dfn=\smartslanted \let\emph=\smartitalic -\let\cite=\smartitalic +\let\cite=\smartslanted \def\b#1{{\bf #1}} \let\strong=\b @@ -1237,22 +1266,22 @@ where each line of input produces a line of output.} \null } \let\ttfont=\t -\def\samp #1{`\tclose{#1}'\null} -\setfont\smallrm\rmshape{8}{1000} -\font\smallsy=cmsy9 -\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{% - \raise0.4pt\hbox{$\langle$}\kern-.08em\vtop{% +\def\samp#1{`\tclose{#1}'\null} +\setfont\keyrm\rmshape{8}{1000} +\font\keysy=cmsy9 +\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% + \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% \vbox{\hrule\kern-0.4pt - \hbox{\raise0.4pt\hbox{\vphantom{$\langle$}}#1}}% + \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% \kern-0.4pt\hrule}% - \kern-.06em\raise0.4pt\hbox{$\rangle$}}}} + \kern-.06em\raise0.4pt\hbox{\angleright}}}} % The old definition, with no lozenge: %\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null} \def\ctrl #1{{\tt \rawbackslash \hat}#1} +% @file, @option are the same as @samp. \let\file=\samp -\let\url=\samp % perhaps include a hypertex \special eventually -\def\email#1{$\langle${\tt #1}$\rangle$} +\let\option=\samp % @code is a modification of @t, % which makes spaces the same size as normal in the surrounding text. @@ -1287,43 +1316,117 @@ where each line of input produces a line of output.} % and arrange explicitly to hyphenate at a dash. % -- rms. { -\catcode`\-=\active -\catcode`\_=\active -\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex} -% The following is used by \doprintindex to insure that long function names -% wrap around. It is necessary for - and _ to be active before the index is -% read from the file, as \entry parses the arguments long before \code is -% ever called. -- mycroft -\global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder} + \catcode`\-=\active + \catcode`\_=\active + % + \global\def\code{\begingroup + \catcode`\-=\active \let-\codedash + \catcode`\_=\active \let_\codeunder + \codex + } + % + % If we end up with any active - characters when handling the index, + % just treat them as a normal -. + \global\def\indexbreaks{\catcode`\-=\active \let-\realdash} } \def\realdash{-} -\def\realunder{_} \def\codedash{-\discretionary{}{}{}} -\def\codeunder{\normalunderscore\discretionary{}{}{}} +\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}} \def\codex #1{\tclose{#1}\endgroup} %\let\exp=\tclose %Was temporary % @kbd is like @code, except that if the argument is just one @key command, % then @kbd has no effect. -% + +% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), +% `example' (@kbd uses ttsl only inside of @example and friends), +% or `code' (@kbd uses normal tty font always). +\def\kbdinputstyle{\parsearg\kbdinputstylexxx} +\def\kbdinputstylexxx#1{% + \def\arg{#1}% + \ifx\arg\worddistinct + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% + \else\ifx\arg\wordexample + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% + \else\ifx\arg\wordcode + \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% + \fi\fi\fi +} +\def\worddistinct{distinct} +\def\wordexample{example} +\def\wordcode{code} + +% Default is kbdinputdistinct. (Too much of a hassle to call the macro, +% the catcodes are wrong for parsearg to work.) +\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl} + \def\xkey{\key} \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% \ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\ttsl\look}}\fi -\else{\tclose{\ttsl\look}}\fi} +\else{\tclose{\kbdfont\look}}\fi +\else{\tclose{\kbdfont\look}}\fi} + +% For @url, @env, @command quotes seem unnecessary, so use \code. +\let\url=\code +\let\env=\code +\let\command=\code + +% @uref (abbreviation for `urlref') takes an optional (comma-separated) +% second argument specifying the text to display and an optional third +% arg as text to display instead of (rather than in addition to) the url +% itself. First (mandatory) arg is the url. Perhaps eventually put in +% a hypertex \special here. +% +\def\uref#1{\douref #1,,,\finish} +\def\douref#1,#2,#3,#4\finish{\begingroup + \unsepspaces + \pdfurl{#1}% + \setbox0 = \hbox{\ignorespaces #3}% + \ifdim\wd0 > 0pt + \unhbox0 % third arg given, show only that + \else + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \ifpdf + \unhbox0 % PDF: 2nd arg given, show only it + \else + \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url + \fi + \else + \code{#1}% only url given, so show it + \fi + \fi + \endlink +\endgroup} + +% rms does not like angle brackets --karl, 17may97. +% So now @email is just like @uref, unless we are pdf. +% +%\def\email#1{\angleleft{\tt #1}\angleright} +\ifpdf + \def\email#1{\doemail#1,,\finish} + \def\doemail#1,#2,#3\finish{\begingroup + \unsepspaces + \pdfurl{mailto:#1}% + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi + \endlink + \endgroup} +\else + \let\email=\uref +\fi % Check if we are currently using a typewriter font. Since all the % Computer Modern typewriter fonts have zero interword stretch (and % shrink), and it is reasonable to expect all typewriter fonts to have % this property, we can check that font parameter. -% +% \def\ifmonospace{\ifdim\fontdimen3\font=0pt } % Typeset a dimension, e.g., `in' or `pt'. The only reason for the -% argument is to make the input look right: @dmn{pt} instead of -% @dmn{}pt. +% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. % \def\dmn#1{\thinspace #1} @@ -1334,11 +1437,14 @@ where each line of input produces a line of output.} % Polish suppressed-l. --karl, 22sep96. %\def\l#1{{\li #1}\null} +% Explicit font changes: @r, @sc, undocumented @ii. \def\r#1{{\rm #1}} % roman font -% Use of \lowercase was suggested. \def\sc#1{{\smallcaps#1}} % smallcaps font \def\ii#1{{\it #1}} % italic font +% @acronym downcases the argument and prints in smallcaps. +\def\acronym#1{{\smallcaps \lowercase{#1}}} + % @pounds{} is a sterling sign. \def\pounds{{\it\$}} @@ -1349,20 +1455,23 @@ where each line of input produces a line of output.} \newskip\titlepagebottomglue \titlepagebottomglue = 2pc % First the title page. Must do @settitle before @titlepage. -\def\titlefont#1{{\titlerm #1}} - \newif\ifseenauthor \newif\iffinishedtitlepage +% Do an implicit @contents or @shortcontents after @end titlepage if the +% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage. +% +\newif\ifsetcontentsaftertitlepage + \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue +\newif\ifsetshortcontentsaftertitlepage + \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue + \def\shorttitlepage{\parsearg\shorttitlepagezzz} \def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% \endgroup\page\hbox{}\page} \def\titlepage{\begingroup \parindent=0pt \textfonts \let\subtitlerm=\tenrm -% I deinstalled the following change because \cmr12 is undefined. -% This change was not in the ChangeLog anyway. --rms. -% \let\subtitlerm=\cmr12 \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}% % \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}% @@ -1372,7 +1481,7 @@ where each line of input produces a line of output.} % % Now you can print the title using @title. \def\title{\parsearg\titlezzz}% - \def\titlezzz##1{\leftline{\titlefont{##1}} + \def\titlezzz##1{\leftline{\titlefonts\rm ##1} % print a rule at the page bottom also. \finishedtitlepagefalse \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% @@ -1411,6 +1520,23 @@ where each line of input produces a line of output.} % after the title page, which we certainly don't want. \oldpage \endgroup + % + % If they want short, they certainly want long too. + \ifsetshortcontentsaftertitlepage + \shortcontents + \contents + \global\let\shortcontents = \relax + \global\let\contents = \relax + \fi + % + \ifsetcontentsaftertitlepage + \contents + \global\let\contents = \relax + \global\let\shortcontents = \relax + \fi + % + \ifpdf \pdfmakepagedesttrue \fi + % \HEADINGSon } @@ -1424,10 +1550,10 @@ where each line of input produces a line of output.} \let\thispage=\folio -\newtoks \evenheadline % Token sequence for heading line of even pages -\newtoks \oddheadline % Token sequence for heading line of odd pages -\newtoks \evenfootline % Token sequence for footing line of even pages -\newtoks \oddfootline % Token sequence for footing line of odd pages +\newtoks\evenheadline % headline on even pages +\newtoks\oddheadline % headline on odd pages +\newtoks\evenfootline % footline on even pages +\newtoks\oddfootline % footline on odd pages % Now make Tex use those variables \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline @@ -1461,10 +1587,7 @@ where each line of input produces a line of output.} \gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish} -\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{% -\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}} -\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} +\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}% \gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} \gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% @@ -1472,12 +1595,15 @@ where each line of input produces a line of output.} \gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} \gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% -\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% + % + % Leave some space for the footline. Hopefully ok to assume + % @evenfooting will not be used by itself. + \global\advance\pageheight by -\baselineskip + \global\advance\vsize by -\baselineskip +} -\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish} -\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{% -\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}} -\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} +\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}} % }% unbind the catcode of @. @@ -1545,39 +1671,23 @@ where each line of input produces a line of output.} % Subroutines used in generating headings % Produces Day Month Year style of output. -\def\today{\number\day\space -\ifcase\month\or -January\or February\or March\or April\or May\or June\or -July\or August\or September\or October\or November\or December\fi -\space\number\year} - -% Use this if you want the Month Day, Year style of output. -%\def\today{\ifcase\month\or -%January\or February\or March\or April\or May\or June\or -%July\or August\or September\or October\or November\or December\fi -%\space\number\day, \number\year} - -% @settitle line... specifies the title of the document, for headings -% It generates no output of its own - -\def\thistitle{No Title} +\def\today{% + \number\day\space + \ifcase\month + \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr + \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug + \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec + \fi + \space\number\year} + +% @settitle line... specifies the title of the document, for headings. +% It generates no output of its own. +\def\thistitle{\putwordNoTitle} \def\settitle{\parsearg\settitlezzz} \def\settitlezzz #1{\gdef\thistitle{#1}} \message{tables,} - -% @tabs -- simple alignment - -% These don't work. For one thing, \+ is defined as outer. -% So these macros cannot even be defined. - -%\def\tabs{\parsearg\tabszzz} -%\def\tabszzz #1{\settabs\+#1\cr} -%\def\tabline{\parsearg\tablinezzz} -%\def\tablinezzz #1{\+#1\cr} -%\def\&{&} - % Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x). % default indentation of table text @@ -1621,11 +1731,6 @@ July\or August\or September\or October\or November\or December\fi \itemindex{#1}% \nobreak % This prevents a break before @itemx. % - % Be sure we are not still in the middle of a paragraph. - %{\parskip = 0in - %\par - %}% - % % If the item text does not fit in the space we have, put it on a line % by itself, and do not allow a page break either before or after that % line. We do not start a paragraph here because then if the next @@ -1654,13 +1759,17 @@ July\or August\or September\or October\or November\or December\fi \itemxneedsnegativevskipfalse \else % The item text fits into the space. Start a paragraph, so that the - % following text (if any) will end up on the same line. Since that - % text will be indented by \tableindent, we make the item text be in - % a zero-width box. + % following text (if any) will end up on the same line. \noindent - \rlap{\hskip -\tableindent\box0}\ignorespaces% - \endgroup% - \itemxneedsnegativevskiptrue% + % Do this with kerns and \unhbox so that if there is a footnote in + % the item text, it can migrate to the main vertical list and + % eventually be printed. + \nobreak\kern-\tableindent + \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 + \unhbox0 + \nobreak\kern\dimen0 + \endgroup + \itemxneedsnegativevskiptrue \fi } @@ -1671,9 +1780,10 @@ July\or August\or September\or October\or November\or December\fi \def\xitem{\errmessage{@xitem while not in a table}} \def\xitemx{\errmessage{@xitemx while not in a table}} -%% Contains a kludge to get @end[description] to work +% Contains a kludge to get @end[description] to work. \def\description{\tablez{\dontindex}{1}{}{}{}{}} +% @table, @ftable, @vtable. \def\table{\begingroup\inENV\obeylines\obeyspaces\tablex} {\obeylines\obeyspaces% \gdef\tablex #1^^M{% @@ -1733,7 +1843,7 @@ July\or August\or September\or October\or November\or December\fi \def\itemize{\parsearg\itemizezzz} \def\itemizezzz #1{% - \begingroup % ended by the @end itemsize + \begingroup % ended by the @end itemize \itemizey {#1}{\Eitemize} } @@ -1861,7 +1971,7 @@ July\or August\or September\or October\or November\or December\fi \def\itemizeitem{% \advance\itemno by 1 {\let\par=\endgraf \smallbreak}% -\ifhmode \errmessage{\in hmode at itemizeitem}\fi +\ifhmode \errmessage{In hmode at itemizeitem}\fi {\parskip=0in \hskip 0pt \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% \vadjust{\penalty 1200}}% @@ -1879,7 +1989,7 @@ July\or August\or September\or October\or November\or December\fi % To make preamble: % -% Either define widths of columns in terms of percent of \hsize: +% Either define widths of columns in terms of percent of \hsize: % @multitable @columnfractions .25 .3 .45 % @item ... % @@ -1897,13 +2007,13 @@ July\or August\or September\or October\or November\or December\fi % the preamble, break the line within one argument and it % will parse correctly, i.e., % -% @multitable {Column 1 template} {Column 2 template} {Column 3 +% @multitable {Column 1 template} {Column 2 template} {Column 3 % template} % Not: -% @multitable {Column 1 template} {Column 2 template} +% @multitable {Column 1 template} {Column 2 template} % {Column 3 template} -% Each new table line starts with @item, each subsequent new column +% Each new table line starts with @item, each subsequent new column % starts with @tab. Empty columns may be produced by supplying @tab's % with nothing between them for as many times as empty columns are needed, % ie, @tab@tab@tab will produce two empty columns. @@ -1915,15 +2025,15 @@ July\or August\or September\or October\or November\or December\fi % @multitable {Column 1 template} {Column 2 template} {Column 3 template} % @item first col stuff @tab second col stuff @tab third col -% @item -% first col stuff -% @tab -% second col stuff -% @tab -% third col -% @item first col stuff @tab second col stuff +% @item +% first col stuff +% @tab +% second col stuff +% @tab +% third col +% @item first col stuff @tab second col stuff % @tab Many paragraphs of text may be used in any column. -% +% % They will wrap at the width determined by the template. % @item@tab@tab This will be in third column. % @end multitable @@ -1935,10 +2045,7 @@ July\or August\or September\or October\or November\or December\fi % @multitablelinespace is space to leave between table items, baseline % to baseline. % 0pt means it depends on current normal line spacing. - -%%%% -% Dimensions - +% \newskip\multitableparskip \newskip\multitableparindent \newdimen\multitablecolspace @@ -1948,117 +2055,150 @@ July\or August\or September\or October\or November\or December\fi \multitablecolspace=12pt \multitablelinespace=0pt -%%%% % Macros used to set up halign preamble: +% \let\endsetuptable\relax \def\xendsetuptable{\endsetuptable} \let\columnfractions\relax \def\xcolumnfractions{\columnfractions} \newif\ifsetpercent -%% 2/1/96, to allow fractions to be given with more than one digit. -\def\pickupwholefraction#1 {\global\advance\colcount by1 % -\expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}% -\setuptable} +% #1 is the part of the @columnfraction before the decimal point, which +% is presumably either 0 or the empty string (but we don't check, we +% just throw it away). #2 is the decimal part, which we use as the +% percent of \hsize for this column. +\def\pickupwholefraction#1.#2 {% + \global\advance\colcount by 1 + \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% + \setuptable +} \newcount\colcount -\def\setuptable#1{\def\firstarg{#1}% -\ifx\firstarg\xendsetuptable\let\go\relax% -\else - \ifx\firstarg\xcolumnfractions\global\setpercenttrue% +\def\setuptable#1{% + \def\firstarg{#1}% + \ifx\firstarg\xendsetuptable + \let\go = \relax \else - \ifsetpercent - \let\go\pickupwholefraction % In this case arg of setuptable - % is the decimal point before the - % number given in percent of hsize. - % We don't need this so we don't use it. + \ifx\firstarg\xcolumnfractions + \global\setpercenttrue \else - \global\advance\colcount by1 - \setbox0=\hbox{#1 }% Add a normal word space as a separator; - % typically that is always in the input, anyway. - \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% + \ifsetpercent + \let\go\pickupwholefraction + \else + \global\advance\colcount by 1 + \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator; + % typically that is always in the input, anyway. + \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% + \fi + \fi + \ifx\go\pickupwholefraction + % Put the argument back for the \pickupwholefraction call, so + % we'll always have a period there to be parsed. + \def\go{\pickupwholefraction#1}% + \else + \let\go = \setuptable \fi% - \fi% -\ifx\go\pickupwholefraction\else\let\go\setuptable\fi% -\fi\go} - -%%%% -% multitable syntax -\def\tab{&\hskip1sp\relax} % 2/2/96 - % tiny skip here makes sure this column space is - % maintained, even if it is never used. + \fi + \go +} +% This used to have \hskip1sp. But then the space in a template line is +% not enough. That is bad. So let's go back to just & until we +% encounter the problem it was intended to solve again. +% --karl, nathan@acm.org, 20apr99. +\def\tab{&} -%%%% % @multitable ... @end multitable definitions: - +% \def\multitable{\parsearg\dotable} - \def\dotable#1{\bgroup -\let\item\cr -\tolerance=9500 -\hbadness=9500 -\setmultitablespacing -\parskip=\multitableparskip -\parindent=\multitableparindent -\overfullrule=0pt -\global\colcount=0\relax% -\def\Emultitable{\global\setpercentfalse\global\everycr{}\cr\egroup\egroup}% - % To parse everything between @multitable and @item : -\setuptable#1 \endsetuptable - % Need to reset this to 0 after \setuptable. -\global\colcount=0\relax% - % - % This preamble sets up a generic column definition, which will - % be used as many times as user calls for columns. - % \vtop will set a single line and will also let text wrap and - % continue for many paragraphs if desired. -\halign\bgroup&\global\advance\colcount by 1\relax% -\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname - % In order to keep entries from bumping into each other - % we will add a \leftskip of \multitablecolspace to all columns after - % the first one. - % If a template has been used, we will add \multitablecolspace - % to the width of each template entry. - % If user has set preamble in terms of percent of \hsize - % we will use that dimension as the width of the column, and - % the \leftskip will keep entries from bumping into each other. - % Table will start at left margin and final column will justify at - % right margin. -\ifnum\colcount=1 -\else - \ifsetpercent + \vskip\parskip + \let\item\crcr + \tolerance=9500 + \hbadness=9500 + \setmultitablespacing + \parskip=\multitableparskip + \parindent=\multitableparindent + \overfullrule=0pt + \global\colcount=0 + \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}% + % + % To parse everything between @multitable and @item: + \setuptable#1 \endsetuptable + % + % \everycr will reset column counter, \colcount, at the end of + % each line. Every column entry will cause \colcount to advance by one. + % The table preamble + % looks at the current \colcount to find the correct column width. + \everycr{\noalign{% + % + % \filbreak%% keeps underfull box messages off when table breaks over pages. + % Maybe so, but it also creates really weird page breaks when the table + % breaks over pages. Wouldn't \vfil be better? Wait until the problem + % manifests itself, so it can be fixed for real --karl. + \global\colcount=0\relax}}% + % + % This preamble sets up a generic column definition, which will + % be used as many times as user calls for columns. + % \vtop will set a single line and will also let text wrap and + % continue for many paragraphs if desired. + \halign\bgroup&\global\advance\colcount by 1\relax + \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip \else - % If user has <not> set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace - \advance\hsize by \multitablecolspace + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace + \fi + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace \fi - % In either case we will make \leftskip=\multitablecolspace: -\leftskip=\multitablecolspace -\fi -\noindent##\multistrut}\cr% - % \everycr will reset column counter, \colcount, at the end of - % each line. Every column entry will cause \colcount to advance by one. - % The table preamble - % looks at the current \colcount to find the correct column width. -\global\everycr{\noalign{% -\filbreak%% keeps underfull box messages off when table breaks over pages. -\global\colcount=0\relax}} + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively marking + % characters. + \noindent\ignorespaces##\unskip\multistrut}\cr } \def\setmultitablespacing{% test to see if user has set \multitablelinespace. % If so, do nothing. If not, give it an appropriate dimension based on % current baselineskip. \ifdim\multitablelinespace=0pt +\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip +\global\advance\multitablelinespace by-\ht0 %% strut to put in table in case some entry doesn't have descenders, %% to keep lines equally spaced \let\multistrut = \strut -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. \else +%% FIXME: what is \box0 supposed to be? \gdef\multistrut{\vrule height\multitablelinespace depth\dp0 width0pt\relax} \fi +%% Test to see if parskip is larger than space between lines of +%% table. If not, do nothing. +%% If so, set to same dimension as multitablelinespace. \ifdim\multitableparskip>\multitablelinespace \global\multitableparskip=\multitablelinespace \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller @@ -2071,6 +2211,356 @@ width0pt\relax} \fi \fi} +\message{conditionals,} +% Prevent errors for section commands. +% Used in @ignore and in failing conditionals. +\def\ignoresections{% + \let\chapter=\relax + \let\unnumbered=\relax + \let\top=\relax + \let\unnumberedsec=\relax + \let\unnumberedsection=\relax + \let\unnumberedsubsec=\relax + \let\unnumberedsubsection=\relax + \let\unnumberedsubsubsec=\relax + \let\unnumberedsubsubsection=\relax + \let\section=\relax + \let\subsec=\relax + \let\subsubsec=\relax + \let\subsection=\relax + \let\subsubsection=\relax + \let\appendix=\relax + \let\appendixsec=\relax + \let\appendixsection=\relax + \let\appendixsubsec=\relax + \let\appendixsubsection=\relax + \let\appendixsubsubsec=\relax + \let\appendixsubsubsection=\relax + \let\contents=\relax + \let\smallbook=\relax + \let\titlepage=\relax +} + +% Used in nested conditionals, where we have to parse the Texinfo source +% and so want to turn off most commands, in case they are used +% incorrectly. +% +\def\ignoremorecommands{% + \let\defcodeindex = \relax + \let\defcv = \relax + \let\deffn = \relax + \let\deffnx = \relax + \let\defindex = \relax + \let\defivar = \relax + \let\defmac = \relax + \let\defmethod = \relax + \let\defop = \relax + \let\defopt = \relax + \let\defspec = \relax + \let\deftp = \relax + \let\deftypefn = \relax + \let\deftypefun = \relax + \let\deftypeivar = \relax + \let\deftypeop = \relax + \let\deftypevar = \relax + \let\deftypevr = \relax + \let\defun = \relax + \let\defvar = \relax + \let\defvr = \relax + \let\ref = \relax + \let\xref = \relax + \let\printindex = \relax + \let\pxref = \relax + \let\settitle = \relax + \let\setchapternewpage = \relax + \let\setchapterstyle = \relax + \let\everyheading = \relax + \let\evenheading = \relax + \let\oddheading = \relax + \let\everyfooting = \relax + \let\evenfooting = \relax + \let\oddfooting = \relax + \let\headings = \relax + \let\include = \relax + \let\lowersections = \relax + \let\down = \relax + \let\raisesections = \relax + \let\up = \relax + \let\set = \relax + \let\clear = \relax + \let\item = \relax +} + +% Ignore @ignore ... @end ignore. +% +\def\ignore{\doignore{ignore}} + +% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. +% +\def\ifinfo{\doignore{ifinfo}} +\def\ifhtml{\doignore{ifhtml}} +\def\ifnottex{\doignore{ifnottex}} +\def\html{\doignore{html}} +\def\menu{\doignore{menu}} +\def\direntry{\doignore{direntry}} + +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory = \comment + +% Ignore text until a line `@end #1'. +% +\def\doignore#1{\begingroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define a command to swallow text until we reach `@end #1'. + % This @ is a catcode 12 token (that is the normal catcode of @ in + % this texinfo.tex file). We change the catcode of @ below to match. + \long\def\doignoretext##1@end #1{\enddoignore}% + % + % Make sure that spaces turn into tokens that match what \doignoretext wants. + \catcode32 = 10 + % + % Ignore braces, too, so mismatched braces don't cause trouble. + \catcode`\{ = 9 + \catcode`\} = 9 + % + % We must not have @c interpreted as a control sequence. + \catcode`\@ = 12 + % + % Make the letter c a comment character so that the rest of the line + % will be ignored. This way, the document can have (for example) + % @c @end ifinfo + % and the @end ifinfo will be properly ignored. + % (We've just changed @ to catcode 12.) + \catcode`\c = 14 + % + % And now expand that command. + \doignoretext +} + +% What we do to finish off ignored text. +% +\def\enddoignore{\endgroup\ignorespaces}% + +\newif\ifwarnedobs\warnedobsfalse +\def\obstexwarn{% + \ifwarnedobs\relax\else + % We need to warn folks that they may have trouble with TeX 3.0. + % This uses \immediate\write16 rather than \message to get newlines. + \immediate\write16{} + \immediate\write16{WARNING: for users of Unix TeX 3.0!} + \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} + \immediate\write16{If you are running another version of TeX, relax.} + \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} + \immediate\write16{ Then upgrade your TeX installation if you can.} + \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} + \immediate\write16{If you are stuck with version 3.0, run the} + \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} + \immediate\write16{ to use a workaround.} + \immediate\write16{} + \global\warnedobstrue + \fi +} + +% **In TeX 3.0, setting text in \nullfont hangs tex. For a +% workaround (which requires the file ``dummy.tfm'' to be installed), +% uncomment the following line: +%%%%%\font\nullfont=dummy\let\obstexwarn=\relax + +% Ignore text, except that we keep track of conditional commands for +% purposes of nesting, up to an `@end #1' command. +% +\def\nestedignore#1{% + \obstexwarn + % We must actually expand the ignored text to look for the @end + % command, so that nested ignore constructs work. Thus, we put the + % text into a \vbox and then do nothing with the result. To minimize + % the change of memory overflow, we follow the approach outlined on + % page 401 of the TeXbook: make the current font be a dummy font. + % + \setbox0 = \vbox\bgroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define `@end #1' to end the box, which will in turn undefine the + % @end command again. + \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% + % + % We are going to be parsing Texinfo commands. Most cause no + % trouble when they are used incorrectly, but some commands do + % complicated argument parsing or otherwise get confused, so we + % undefine them. + % + % We can't do anything about stray @-signs, unfortunately; + % they'll produce `undefined control sequence' errors. + \ignoremorecommands + % + % Set the current font to be \nullfont, a TeX primitive, and define + % all the font commands to also use \nullfont. We don't use + % dummy.tfm, as suggested in the TeXbook, because not all sites + % might have that installed. Therefore, math mode will still + % produce output, but that should be an extremely small amount of + % stuff compared to the main input. + % + \nullfont + \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont + \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont + \let\tensf=\nullfont + % Similarly for index fonts (mostly for their use in smallexample). + \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont + \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont + \let\smallsf=\nullfont + % + % Don't complain when characters are missing from the fonts. + \tracinglostchars = 0 + % + % Don't bother to do space factor calculations. + \frenchspacing + % + % Don't report underfull hboxes. + \hbadness = 10000 + % + % Do minimal line-breaking. + \pretolerance = 10000 + % + % Do not execute instructions in @tex + \def\tex{\doignore{tex}}% + % Do not execute macro definitions. + % `c' is a comment character, so the word `macro' will get cut off. + \def\macro{\doignore{ma}}% +} + +% @set VAR sets the variable VAR to an empty value. +% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. +% +% Since we want to separate VAR from REST-OF-LINE (which might be +% empty), we can't just use \parsearg; we have to insert a space of our +% own to delimit the rest of the line, and then take it out again if we +% didn't need it. Make sure the catcode of space is correct to avoid +% losing inside @example, for instance. +% +\def\set{\begingroup\catcode` =10 + \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. + \parsearg\setxxx} +\def\setxxx#1{\setyyy#1 \endsetyyy} +\def\setyyy#1 #2\endsetyyy{% + \def\temp{#2}% + \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty + \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. + \fi + \endgroup +} +% Can't use \xdef to pre-expand #2 and save some time, since \temp or +% \next or other control sequences that we've defined might get us into +% an infinite loop. Consider `@set foo @cite{bar}'. +\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} + +% @clear VAR clears (i.e., unsets) the variable VAR. +% +\def\clear{\parsearg\clearxxx} +\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} + +% @value{foo} gets the text saved in variable foo. +{ + \catcode`\_ = \active + % + % We might end up with active _ or - characters in the argument if + % we're called from @code, as @code{@value{foo-bar_}}. So \let any + % such active characters to their normal equivalents. + \gdef\value{\begingroup + \catcode`\-=12 \catcode`\_=12 + \indexbreaks \let_\normalunderscore + \valuexxx} +} +\def\valuexxx#1{\expandablevalue{#1}\endgroup} + +% We have this subroutine so that we can handle at least some @value's +% properly in indexes (we \let\value to this in \indexdummies). Ones +% whose names contain - or _ still won't work, but we can't do anything +% about that. The command has to be fully expandable, since the result +% winds up in the index file. This means that if the variable's value +% contains other Texinfo commands, it's almost certain it will fail +% (although perhaps we could fix that with sufficient work to do a +% one-level expansion on the result, instead of complete). +% +\def\expandablevalue#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + {[No value for ``#1'']}% + \else + \csname SET#1\endcsname + \fi +} + +% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined +% with @set. +% +\def\ifset{\parsearg\ifsetxxx} +\def\ifsetxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifsetfail + \else + \expandafter\ifsetsucceed + \fi +} +\def\ifsetsucceed{\conditionalsucceed{ifset}} +\def\ifsetfail{\nestedignore{ifset}} +\defineunmatchedend{ifset} + +% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% defined with @set, or has been undefined with @clear. +% +\def\ifclear{\parsearg\ifclearxxx} +\def\ifclearxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifclearsucceed + \else + \expandafter\ifclearfail + \fi +} +\def\ifclearsucceed{\conditionalsucceed{ifclear}} +\def\ifclearfail{\nestedignore{ifclear}} +\defineunmatchedend{ifclear} + +% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text +% following, through the first @end iftex (etc.). Make `@end iftex' +% (etc.) valid only after an @iftex. +% +\def\iftex{\conditionalsucceed{iftex}} +\def\ifnothtml{\conditionalsucceed{ifnothtml}} +\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} +\defineunmatchedend{iftex} +\defineunmatchedend{ifnothtml} +\defineunmatchedend{ifnotinfo} + +% We can't just want to start a group at @iftex (for example) and end it +% at @end iftex, since then @set commands inside the conditional have no +% effect (they'd get reverted at the end of the group). So we must +% define \Eiftex to redefine itself to be its previous value. (We can't +% just define it to fail again with an ``unmatched end'' error, since +% the @ifset might be nested.) +% +\def\conditionalsucceed#1{% + \edef\temp{% + % Remember the current value of \E#1. + \let\nece{prevE#1} = \nece{E#1}% + % + % At the `@end #1', redefine \E#1 to be its previous value. + \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% + }% + \temp +} + +% We need to expand lots of \csname's, but we don't want to expand the +% control sequences after we've constructed them. +% +\def\nece#1{\expandafter\noexpand\csname#1\endcsname} + +% @defininfoenclose. +\let\definfoenclose=\comment + + \message{indexing,} % Index generation facilities @@ -2086,12 +2576,14 @@ width0pt\relax} \fi % the file that accumulates this index. The file's extension is foo. % The name of an index should be no more than 2 characters long % for the sake of vms. - -\def\newindex #1{ -\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file -\openout \csname#1indfile\endcsname \jobname.#1 % Open the file -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex -\noexpand\doindex {#1}} +% +\def\newindex#1{% + \iflinks + \expandafter\newwrite \csname#1indfile\endcsname + \openout \csname#1indfile\endcsname \jobname.#1 % Open the file + \fi + \expandafter\xdef\csname#1index\endcsname{% % Define @#1index + \noexpand\doindex{#1}} } % @defindex foo == \newindex{foo} @@ -2100,31 +2592,37 @@ width0pt\relax} \fi % Define @defcodeindex, like @defindex except put all entries in @code. -\def\newcodeindex #1{ -\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file -\openout \csname#1indfile\endcsname \jobname.#1 % Open the file -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex -\noexpand\docodeindex {#1}} +\def\newcodeindex#1{% + \iflinks + \expandafter\newwrite \csname#1indfile\endcsname + \openout \csname#1indfile\endcsname \jobname.#1 + \fi + \expandafter\xdef\csname#1index\endcsname{% + \noexpand\docodeindex{#1}} } \def\defcodeindex{\parsearg\newcodeindex} % @synindex foo bar makes index foo feed into index bar. % Do this instead of @defindex foo if you don't want it as a separate index. -\def\synindex #1 #2 {% -\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname -\expandafter\let\csname#1indfile\endcsname=\synindexfoo -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex -\noexpand\doindex {#2}}% +% The \closeout helps reduce unnecessary open files; the limit on the +% Acorn RISC OS is a mere 16 files. +\def\synindex#1 #2 {% + \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname + \expandafter\closeout\csname#1indfile\endcsname + \expandafter\let\csname#1indfile\endcsname=\synindexfoo + \expandafter\xdef\csname#1index\endcsname{% define \xxxindex + \noexpand\doindex{#2}}% } % @syncodeindex foo bar similar, but put all entries made for index foo % inside @code. -\def\syncodeindex #1 #2 {% -\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname -\expandafter\let\csname#1indfile\endcsname=\synindexfoo -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex -\noexpand\docodeindex {#2}}% +\def\syncodeindex#1 #2 {% + \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname + \expandafter\closeout\csname#1indfile\endcsname + \expandafter\let\csname#1indfile\endcsname=\synindexfoo + \expandafter\xdef\csname#1index\endcsname{% define \xxxindex + \noexpand\docodeindex{#2}}% } % Define \doindex, the driver for all \fooindex macros. @@ -2145,6 +2643,7 @@ width0pt\relax} \fi \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} \def\indexdummies{% +\def\ { }% % Take care of the plain tex accent commands. \def\"{\realbackslash "}% \def\`{\realbackslash `}% @@ -2174,8 +2673,11 @@ width0pt\relax} \fi % (Must be a way to avoid doing expansion at all, and thus not have to % laboriously list every single command here.) \def\@{@}% will be @@ when we switch to @ as escape char. -%\let\{ = \lbracecmd -%\let\} = \rbracecmd +% Need these in case \tex is in effect and \{ is a \delimiter again. +% But can't use \lbracecmd and \rbracecmd because texindex assumes +% braces and backslashes are used only as delimiters. +\let\{ = \mylbrace +\let\} = \myrbrace \def\_{{\realbackslash _}}% \def\w{\realbackslash w }% \def\bf{\realbackslash bf }% @@ -2186,12 +2688,22 @@ width0pt\relax} \fi \def\gtr{\realbackslash gtr}% \def\less{\realbackslash less}% \def\hat{\realbackslash hat}% -%\def\char{\realbackslash char}% \def\TeX{\realbackslash TeX}% \def\dots{\realbackslash dots }% -\def\copyright{\realbackslash copyright }% +\def\result{\realbackslash result}% +\def\equiv{\realbackslash equiv}% +\def\expansion{\realbackslash expansion}% +\def\print{\realbackslash print}% +\def\error{\realbackslash error}% +\def\point{\realbackslash point}% +\def\copyright{\realbackslash copyright}% \def\tclose##1{\realbackslash tclose {##1}}% \def\code##1{\realbackslash code {##1}}% +\def\uref##1{\realbackslash uref {##1}}% +\def\url##1{\realbackslash url {##1}}% +\def\env##1{\realbackslash env {##1}}% +\def\command##1{\realbackslash command {##1}}% +\def\option##1{\realbackslash option {##1}}% \def\dotless##1{\realbackslash dotless {##1}}% \def\samp##1{\realbackslash samp {##1}}% \def\,##1{\realbackslash ,{##1}}% @@ -2199,6 +2711,7 @@ width0pt\relax} \fi \def\r##1{\realbackslash r {##1}}% \def\i##1{\realbackslash i {##1}}% \def\b##1{\realbackslash b {##1}}% +\def\sc##1{\realbackslash sc {##1}}% \def\cite##1{\realbackslash cite {##1}}% \def\key##1{\realbackslash key {##1}}% \def\file##1{\realbackslash file {##1}}% @@ -2206,7 +2719,16 @@ width0pt\relax} \fi \def\kbd##1{\realbackslash kbd {##1}}% \def\dfn##1{\realbackslash dfn {##1}}% \def\emph##1{\realbackslash emph {##1}}% +\def\acronym##1{\realbackslash acronym {##1}}% +% +% Handle some cases of @value -- where the variable name does not +% contain - or _, and the value does not contain any +% (non-fully-expandable) commands. +\let\value = \expandablevalue +% \unsepspaces +% Turn off macro expansion +\turnoffmacros } % If an index command is used in an @example environment, any spaces @@ -2263,6 +2785,12 @@ width0pt\relax} \fi %\let\tt=\indexdummyfont \let\tclose=\indexdummyfont \let\code=\indexdummyfont +\let\url=\indexdummyfont +\let\uref=\indexdummyfont +\let\env=\indexdummyfont +\let\acronym=\indexdummyfont +\let\command=\indexdummyfont +\let\option=\indexdummyfont \let\file=\indexdummyfont \let\samp=\indexdummyfont \let\kbd=\indexdummyfont @@ -2278,14 +2806,24 @@ width0pt\relax} \fi % so we do not become unable to do a definition. {\catcode`\@=0 \catcode`\\=\other -@gdef@realbackslash{\}} + @gdef@realbackslash{\}} \let\indexbackslash=0 %overridden during \printindex. +\let\SETmarginindex=\relax % put index entries in margin (undocumented)? + +% For \ifx comparisons. +\def\emptymacro{\empty} -\let\SETmarginindex=\relax %initialize! -% workhorse for all \fooindexes -% #1 is name of index, #2 is stuff to put there -\def\doind #1#2{% +% Most index entries go through here, but \dosubind is the general case. +% +\def\doind#1#2{\dosubind{#1}{#2}\empty} + +% Workhorse for all \fooindexes. +% #1 is name of index, #2 is stuff to put there, #3 is subentry -- +% \empty if called from \doind, as we usually are. The main exception +% is with defuns, which call us directly. +% +\def\dosubind#1#2#3{% % Put the index entry in the margin if desired. \ifx\SETmarginindex\relax\else \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}% @@ -2296,48 +2834,75 @@ width0pt\relax} \fi \indexdummies % Must do this here, since \bf, etc expand at this stage \escapechar=`\\ {% - \let\folio=0 % We will expand all macros now EXCEPT \folio. + \let\folio = 0% We will expand all macros now EXCEPT \folio. \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now % so it will be output as is; and it will print as backslash. % - % First process the index-string with all font commands turned off - % to get the string to sort by. - {\indexnofonts \xdef\indexsorttmp{#2}}% + \def\thirdarg{#3}% % - % Now produce the complete index entry, with both the sort key and the - % original text, including any font commands. + % If third arg is present, precede it with space in sort key. + \ifx\thirdarg\emptymacro + \let\subentry = \empty + \else + \def\subentry{ #3}% + \fi + % + % First process the index entry with all font commands turned + % off to get the string to sort by. + {\indexnofonts \xdef\indexsorttmp{#2\subentry}}% + % + % Now the real index entry with the fonts. \toks0 = {#2}% + % + % If third (subentry) arg is present, add it to the index + % string. And include a space. + \ifx\thirdarg\emptymacro \else + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + % Set up the complete index entry, with both the sort key + % and the original text, including any font commands. We write + % three arguments to \entry to the .?? file, texindex reduces to + % two when writing the .??s sorted result. \edef\temp{% \write\csname#1indfile\endcsname{% \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}% }% - \temp + % + % If a skip is the last thing on the list now, preserve it + % by backing up by \lastskip, doing the \write, then inserting + % the skip again. Otherwise, the whatsit generated by the + % \write will make \lastskip zero. The result is that sequences + % like this: + % @end defun + % @tindex whatever + % @defun ... + % will have extra space inserted, because the \medbreak in the + % start of the @defun won't see the skip inserted by the @end of + % the previous defun. + % + % But don't do any of this if we're not in vertical mode. We + % don't want to do a \vskip and prematurely end a paragraph. + % + % Avoid page breaks due to these extra skips, too. + % + \iflinks + \ifvmode + \skip0 = \lastskip + \ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi + \fi + % + \temp % do the write + % + % + \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi + \fi }% }% \penalty\count255 }% } -\def\dosubind #1#2#3{% -{\count10=\lastpenalty % -{\indexdummies % Must do this here, since \bf, etc expand at this stage -\escapechar=`\\% -{\let\folio=0% -\def\rawbackslashxx{\indexbackslash}% -% -% Now process the index-string once, with all font commands turned off, -% to get the string to sort the index by. -{\indexnofonts -\xdef\temp1{#2 #3}% -}% -% Now produce the complete index entry. We process the index-string again, -% this time with font commands expanded, to get what to print in the index. -\edef\temp{% -\write \csname#1indfile\endcsname{% -\realbackslash entry {\temp1}{\folio}{#2}{#3}}}% -\temp }% -}\penalty\count10}} - % The index entry written in the file actually looks like % \entry {sortstring}{page}{topic} % or @@ -2370,36 +2935,30 @@ width0pt\relax} \fi % Define the macros used in formatting output of the sorted index material. -% This is what you call to cause a particular index to get printed. -% Write -% @unnumbered Function Index -% @printindex fn - +% @printindex causes a particular index (the ??s file) to get printed. +% It does not print any chapter heading (usually an @unnumbered). +% \def\printindex{\parsearg\doprintindex} - \def\doprintindex#1{\begingroup \dobreak \chapheadingskip{10000}% % - \indexfonts \rm + \smallfonts \rm \tolerance = 9500 \indexbreaks - \def\indexbackslash{\rawbackslashxx}% - % Index files are almost Texinfo source, but we use \ as the escape - % character. It would be better to use @, but that's too big a change - % to make right now. - \catcode`\\ = 0 - \catcode`\@ = 11 - \escapechar = `\\ - \begindoublecolumns % % See if the index file exists and is nonempty. + % Change catcode of @ here so that if the index file contains + % \initial {@} + % as its first line, TeX doesn't complain about mismatched braces + % (because it thinks @} is a control sequence). + \catcode`\@ = 11 \openin 1 \jobname.#1s \ifeof 1 % \enddoublecolumns gets confused if there is no text in the index, % and it loses the chapter title and the aux file entries for the % index. The easiest way to prevent this problem is to make sure % there is some text. - (Index is nonexistent) + \putwordIndexNonexistent \else % % If the index file exists but is empty, then \openin leaves \ifeof @@ -2407,33 +2966,54 @@ width0pt\relax} \fi % it can discover if there is anything in it. \read 1 to \temp \ifeof 1 - (Index is empty) + \putwordIndexIsEmpty \else + % Index files are almost Texinfo source, but we use \ as the escape + % character. It would be better to use @, but that's too big a change + % to make right now. + \def\indexbackslash{\rawbackslashxx}% + \catcode`\\ = 0 + \escapechar = `\\ + \begindoublecolumns \input \jobname.#1s + \enddoublecolumns \fi \fi \closein 1 - \enddoublecolumns \endgroup} % These macros are used by the sorted index file itself. % Change them to control the appearance of the index. -% Same as \bigskipamount except no shrink. -% \balancecolumns gets confused if there is any shrink. -\newskip\initialskipamount \initialskipamount 12pt plus4pt - -\def\initial #1{% -{\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt -\ifdim\lastskip<\initialskipamount -\removelastskip \penalty-200 \vskip \initialskipamount\fi -\line{\secbf#1\hfill}\kern 2pt\penalty10000}} +\def\initial#1{{% + % Some minor font changes for the special characters. + \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt + % + % Remove any glue we may have, we'll be inserting our own. + \removelastskip + % + % We like breaks before the index initials, so insert a bonus. + \penalty -300 + % + % Typeset the initial. Making this add up to a whole number of + % baselineskips increases the chance of the dots lining up from column + % to column. It still won't often be perfect, because of the stretch + % we need before each entry, but it's better. + % + % No shrink because it confuses \balancecolumns. + \vskip 1.67\baselineskip plus .5\baselineskip + \leftline{\secbf #1}% + \vskip .33\baselineskip plus .1\baselineskip + % + % Do our best not to break after the initial. + \nobreak +}} % This typesets a paragraph consisting of #1, dot leaders, and then #2 % flush to the right margin. It is used for index and table of contents % entries. The paragraph is indented by \leftskip. % -\def\entry #1#2{\begingroup +\def\entry#1#2{\begingroup % % Start a new paragraph if necessary, so our assignments below can't % affect previous text. @@ -2456,12 +3036,15 @@ width0pt\relax} \fi % % \hangafter is reset to 1 (which is the value we want) at the start % of each paragraph, so we need not do anything with that. - \hangindent=2em + \hangindent = 2em % % When the entry text needs to be broken, just fill out the first line % with blank space. \rightskip = 0pt plus1fil % + % A bit of stretch before each entry for the benefit of balancing columns. + \vskip 0pt plus1pt + % % Start a ``paragraph'' for the index entry so the line breaking % parameters we've set above will have an effect. \noindent @@ -2486,7 +3069,11 @@ width0pt\relax} \fi % The `\ ' here is removed by the implicit \unskip that TeX does as % part of (the primitive) \par. Without it, a spurious underfull % \hbox ensues. - \ #2% The page number ends the paragraph. + \ifpdf + \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. + \else + \ #2% The page number ends the paragraph. + \fi \fi% \par \endgroup} @@ -2515,24 +3102,41 @@ width0pt\relax} \fi \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns % Grab any single-column material above us. - \output = {\global\setbox\partialpage - =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}% - \eject + \output = {% + % + % Here is a possibility not foreseen in manmac: if we accumulate a + % whole lot of material, we might end up calling this \output + % routine twice in a row (see the doublecol-lose test, which is + % essentially a couple of indexes with @setchapternewpage off). In + % that case we just ship out what is in \partialpage with the normal + % output routine. Generally, \partialpage will be empty when this + % runs and this will be a no-op. See the indexspread.tex test case. + \ifvoid\partialpage \else + \onepageout{\pagecontents\partialpage}% + \fi + % + \global\setbox\partialpage = \vbox{% + % Unvbox the main output page. + \unvbox\PAGE + \kern-\topskip \kern\baselineskip + }% + }% + \eject % run that output routine to set \partialpage % - % Now switch to the double-column output routine. - \output={\doublecolumnout}% + % Use the double-column output routine for subsequent pages. + \output = {\doublecolumnout}% % % Change the page size parameters. We could do this once outside this % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 % format, but then we repeat the same computation. Repeating a couple % of assignments once per index is clearly meaningless for the - % execution time, so we may as well do it once. + % execution time, so we may as well do it in one place. % % First we halve the line length, less a little for the gutter between % the columns. We compute the gutter based on the line length, so it % changes automatically with the paper format. The magic constant - % below is chosen so that the gutter has the same value (well, +- < - % 1pt) as it did when we hard-coded it. + % below is chosen so that the gutter has the same value (well, +-<1pt) + % as it did when we hard-coded it. % % We put the result in a separate register, \doublecolumhsize, so we % can restore it in \pagesofar, after \hsize itself has (potentially) @@ -2545,109 +3149,140 @@ width0pt\relax} \fi % % Double the \vsize as well. (We don't need a separate register here, % since nobody clobbers \vsize.) + \advance\vsize by -\ht\partialpage \vsize = 2\vsize } + +% The double-column output routine for all double-column pages except +% the last. +% \def\doublecolumnout{% \splittopskip=\topskip \splitmaxdepth=\maxdepth % Get the available space for the double columns -- the normal % (undoubled) page height minus any material left over from the % previous page. - \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage - % box0 will be the left-hand column, box1 the right. + \dimen@ = \vsize + \divide\dimen@ by 2 + % + % box0 will be the left-hand column, box2 the right. \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ \onepageout\pagesofar - \unvbox255 \penalty\outputpenalty + \unvbox255 + \penalty\outputpenalty } \def\pagesofar{% - % The contents of the output page -- any previous material, - % followed by the two boxes we just split. + % Re-output the contents of the output page -- any previous material, + % followed by the two boxes we just split, in box0 and box2. \unvbox\partialpage + % \hsize = \doublecolumnhsize - \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}% + \wd0=\hsize \wd2=\hsize + \hbox to\pagewidth{\box0\hfil\box2}% } \def\enddoublecolumns{% - \output={\balancecolumns}\eject % split what we have - \endgroup - % Back to normal single-column typesetting, but take account of the - % fact that we just accumulated some stuff on the output page. - \pagegoal=\vsize + \output = {% + % Split the last of the double-column material. Leave it on the + % current page, no automatic page break. + \balancecolumns + % + % If we end up splitting too much material for the current page, + % though, there will be another page break right after this \output + % invocation ends. Having called \balancecolumns once, we do not + % want to call it again. Therefore, reset \output to its normal + % definition right away. (We hope \balancecolumns will never be + % called on to balance too much material, but if it is, this makes + % the output somewhat more palatable.) + \global\output = {\onepageout{\pagecontents\PAGE}}% + }% + \eject + \endgroup % started in \begindoublecolumns + % + % \pagegoal was set to the doubled \vsize above, since we restarted + % the current page. We're now back to normal single-column + % typesetting, so reset \pagegoal to the normal \vsize (after the + % \endgroup where \vsize got restored). + \pagegoal = \vsize } \def\balancecolumns{% - % Called on the last page of the double column material. - \setbox0=\vbox{\unvbox255}% + % Called at the end of the double column material. + \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. \dimen@ = \ht0 \advance\dimen@ by \topskip \advance\dimen@ by-\baselineskip - \divide\dimen@ by 2 + \divide\dimen@ by 2 % target to split to + %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}% \splittopskip = \topskip % Loop until we get a decent breakpoint. - {\vbadness=10000 \loop \global\setbox3=\copy0 - \global\setbox1=\vsplit3 to\dimen@ - \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat}% + {% + \vbadness = 10000 + \loop + \global\setbox3 = \copy0 + \global\setbox1 = \vsplit3 to \dimen@ + \ifdim\ht3>\dimen@ + \global\advance\dimen@ by 1pt + \repeat + }% + %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}% \setbox0=\vbox to\dimen@{\unvbox1}% \setbox2=\vbox to\dimen@{\unvbox3}% + % \pagesofar } -\catcode `\@=\other +\catcode`\@ = \other \message{sectioning,} -% Define chapters, sections, etc. +% Chapters, sections, etc. -\newcount \chapno -\newcount \secno \secno=0 -\newcount \subsecno \subsecno=0 -\newcount \subsubsecno \subsubsecno=0 +\newcount\chapno +\newcount\secno \secno=0 +\newcount\subsecno \subsecno=0 +\newcount\subsubsecno \subsubsecno=0 % This counter is funny since it counts through charcodes of letters A, B, ... -\newcount \appendixno \appendixno = `\@ -\def\appendixletter{\char\the\appendixno} - -\newwrite \contentsfile -% This is called from \setfilename. -\def\opencontents{\openout \contentsfile = \jobname.toc} +\newcount\appendixno \appendixno = `\@ +% \def\appendixletter{\char\the\appendixno} +% We do the following for the sake of pdftex, which needs the actual +% letter in the expansion, not just typeset. +\def\appendixletter{% + \ifnum\appendixno=`A A% + \else\ifnum\appendixno=`B B% + \else\ifnum\appendixno=`C C% + \else\ifnum\appendixno=`D D% + \else\ifnum\appendixno=`E E% + \else\ifnum\appendixno=`F F% + \else\ifnum\appendixno=`G G% + \else\ifnum\appendixno=`H H% + \else\ifnum\appendixno=`I I% + \else\ifnum\appendixno=`J J% + \else\ifnum\appendixno=`K K% + \else\ifnum\appendixno=`L L% + \else\ifnum\appendixno=`M M% + \else\ifnum\appendixno=`N N% + \else\ifnum\appendixno=`O O% + \else\ifnum\appendixno=`P P% + \else\ifnum\appendixno=`Q Q% + \else\ifnum\appendixno=`R R% + \else\ifnum\appendixno=`S S% + \else\ifnum\appendixno=`T T% + \else\ifnum\appendixno=`U U% + \else\ifnum\appendixno=`V V% + \else\ifnum\appendixno=`W W% + \else\ifnum\appendixno=`X X% + \else\ifnum\appendixno=`Y Y% + \else\ifnum\appendixno=`Z Z% + % The \the is necessary, despite appearances, because \appendixletter is + % expanded while writing the .toc file. \char\appendixno is not + % expandable, thus it is written literally, thus all appendixes come out + % with the same letter (or @) in the toc without it. + \else\char\the\appendixno + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} % Each @chapter defines this as the name of the chapter. -% page headings and footings can use it. @section does likewise - -\def\thischapter{} \def\thissection{} -\def\seccheck#1{\if \pageno<0 % -\errmessage{@#1 not allowed after generating table of contents}\fi -% -} - -\def\chapternofonts{% -\let\rawbackslash=\relax% -\let\frenchspacing=\relax% -\def\result{\realbackslash result} -\def\equiv{\realbackslash equiv} -\def\expansion{\realbackslash expansion} -\def\print{\realbackslash print} -\def\TeX{\realbackslash TeX} -\def\dots{\realbackslash dots} -\def\copyright{\realbackslash copyright} -\def\tt{\realbackslash tt} -\def\bf{\realbackslash bf } -\def\w{\realbackslash w} -\def\less{\realbackslash less} -\def\gtr{\realbackslash gtr} -\def\hat{\realbackslash hat} -\def\char{\realbackslash char} -\def\tclose##1{\realbackslash tclose {##1}} -\def\code##1{\realbackslash code {##1}} -\def\samp##1{\realbackslash samp {##1}} -\def\r##1{\realbackslash r {##1}} -\def\b##1{\realbackslash b {##1}} -\def\key##1{\realbackslash key {##1}} -\def\file##1{\realbackslash file {##1}} -\def\kbd##1{\realbackslash kbd {##1}} -% These are redefined because @smartitalic wouldn't work inside xdef. -\def\i##1{\realbackslash i {##1}} -\def\cite##1{\realbackslash cite {##1}} -\def\var##1{\realbackslash var {##1}} -\def\emph##1{\realbackslash emph {##1}} -\def\dfn##1{\realbackslash dfn {##1}} -} +% page headings and footings can use it. @section does likewise. +\def\thischapter{} +\def\thissection{} \newcount\absseclevel % used to calculate proper heading level \newcount\secbase\secbase=0 % @raise/lowersections modify this count @@ -2719,57 +3354,59 @@ width0pt\relax} \fi \fi } - +% @chapter, @appendix, @unnumbered. \def\thischaptername{No Chapter Title} \outer\def\chapter{\parsearg\chapteryyy} \def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz -\def\chapterzzz #1{\seccheck{chapter}% +\def\chapterzzz #1{% \secno=0 \subsecno=0 \subsubsecno=0 -\global\advance \chapno by 1 \message{\putwordChapter \the\chapno}% +\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}% \chapmacro {#1}{\the\chapno}% \gdef\thissection{#1}% \gdef\thischaptername{#1}% % We don't substitute the actual chapter name into \thischapter % because we don't want its macros evaluated now. \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}% -{\chapternofonts% -\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\donoderef % +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}% + {\the\chapno}}}% +\temp +\donoderef \global\let\section = \numberedsec \global\let\subsection = \numberedsubsec \global\let\subsubsection = \numberedsubsubsec -}} +} \outer\def\appendix{\parsearg\appendixyyy} \def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz -\def\appendixzzz #1{\seccheck{appendix}% +\def\appendixzzz #1{% \secno=0 \subsecno=0 \subsubsecno=0 -\global\advance \appendixno by 1 \message{Appendix \appendixletter}% +\global\advance \appendixno by 1 +\message{\putwordAppendix\space \appendixletter}% \chapmacro {#1}{\putwordAppendix{} \appendixletter}% \gdef\thissection{#1}% \gdef\thischaptername{#1}% \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}% -{\chapternofonts% -\edef\temp{{\realbackslash chapentry - {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\appendixnoderef % +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}% + {\putwordAppendix{} \appendixletter}}}% +\temp +\appendixnoderef \global\let\section = \appendixsec \global\let\subsection = \appendixsubsec \global\let\subsubsection = \appendixsubsubsec -}} +} % @centerchap is like @unnumbered, but the heading is centered. \outer\def\centerchap{\parsearg\centerchapyyy} \def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}} +% @top is like @unnumbered. \outer\def\top{\parsearg\unnumberedyyy} + \outer\def\unnumbered{\parsearg\unnumberedyyy} \def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz -\def\unnumberedzzz #1{\seccheck{unnumbered}% +\def\unnumberedzzz #1{% \secno=0 \subsecno=0 \subsubsecno=0 % % This used to be simply \message{#1}, but TeX fully expands the @@ -2781,146 +3418,139 @@ width0pt\relax} \fi % Anyway, we don't want the fully-expanded definition of @cite to appear % as a result of the \message, we just want `@cite' itself. We use % \the<toks register> to achieve this: TeX expands \the<toks> only once, -% simply yielding the contents of the <toks register>. +% simply yielding the contents of <toks register>. (We also do this for +% the toc entries.) \toks0 = {#1}\message{(\the\toks0)}% % \unnumbchapmacro {#1}% \gdef\thischapter{#1}\gdef\thissection{#1}% -{\chapternofonts% -\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\unnumbnoderef % +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}% +\temp +\unnumbnoderef \global\let\section = \unnumberedsec \global\let\subsection = \unnumberedsubsec \global\let\subsubsection = \unnumberedsubsubsec -}} +} +% Sections. \outer\def\numberedsec{\parsearg\secyyy} \def\secyyy #1{\numhead1{#1}} % normally calls seczzz -\def\seczzz #1{\seccheck{section}% +\def\seczzz #1{% \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% -{\chapternofonts% -\edef\temp{{\realbackslash secentry % -{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\donoderef % -\penalty 10000 % -}} +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}% + {\the\chapno}{\the\secno}}}% +\temp +\donoderef +\nobreak +} \outer\def\appendixsection{\parsearg\appendixsecyyy} \outer\def\appendixsec{\parsearg\appendixsecyyy} \def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz -\def\appendixsectionzzz #1{\seccheck{appendixsection}% +\def\appendixsectionzzz #1{% \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% -{\chapternofonts% -\edef\temp{{\realbackslash secentry % -{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\appendixnoderef % -\penalty 10000 % -}} +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}% + {\appendixletter}{\the\secno}}}% +\temp +\appendixnoderef +\nobreak +} \outer\def\unnumberedsec{\parsearg\unnumberedsecyyy} \def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz -\def\unnumberedseczzz #1{\seccheck{unnumberedsec}% +\def\unnumberedseczzz #1{% \plainsecheading {#1}\gdef\thissection{#1}% -{\chapternofonts% -\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\unnumbnoderef % -\penalty 10000 % -}} +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}% +\temp +\unnumbnoderef +\nobreak +} +% Subsections. \outer\def\numberedsubsec{\parsearg\numberedsubsecyyy} \def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz -\def\numberedsubseczzz #1{\seccheck{subsection}% +\def\numberedsubseczzz #1{% \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% -{\chapternofonts% -\edef\temp{{\realbackslash subsecentry % -{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\donoderef % -\penalty 10000 % -}} +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}% + {\the\chapno}{\the\secno}{\the\subsecno}}}% +\temp +\donoderef +\nobreak +} \outer\def\appendixsubsec{\parsearg\appendixsubsecyyy} \def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz -\def\appendixsubseczzz #1{\seccheck{appendixsubsec}% +\def\appendixsubseczzz #1{% \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% -{\chapternofonts% -\edef\temp{{\realbackslash subsecentry % -{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\appendixnoderef % -\penalty 10000 % -}} +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}% + {\appendixletter}{\the\secno}{\the\subsecno}}}% +\temp +\appendixnoderef +\nobreak +} \outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy} \def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz -\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}% +\def\unnumberedsubseczzz #1{% \plainsubsecheading {#1}\gdef\thissection{#1}% -{\chapternofonts% -\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\unnumbnoderef % -\penalty 10000 % -}} +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry% + {\the\toks0}}}% +\temp +\unnumbnoderef +\nobreak +} +% Subsubsections. \outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy} \def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz -\def\numberedsubsubseczzz #1{\seccheck{subsubsection}% +\def\numberedsubsubseczzz #1{% \gdef\thissection{#1}\global\advance \subsubsecno by 1 % \subsubsecheading {#1} {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% -{\chapternofonts% -\edef\temp{{\realbackslash subsubsecentry % - {#1} - {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno} - {\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\donoderef % -\penalty 10000 % -}} +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}% + {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}% +\temp +\donoderef +\nobreak +} \outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy} \def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz -\def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}% +\def\appendixsubsubseczzz #1{% \gdef\thissection{#1}\global\advance \subsubsecno by 1 % \subsubsecheading {#1} {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% -{\chapternofonts% -\edef\temp{{\realbackslash subsubsecentry{#1}% - {\appendixletter} - {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\appendixnoderef % -\penalty 10000 % -}} +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}% + {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}% +\temp +\appendixnoderef +\nobreak +} \outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy} \def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz -\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}% +\def\unnumberedsubsubseczzz #1{% \plainsubsubsecheading {#1}\gdef\thissection{#1}% -{\chapternofonts% -\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\unnumbnoderef % -\penalty 10000 % -}} +\toks0 = {#1}% +\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry% + {\the\toks0}}}% +\temp +\unnumbnoderef +\nobreak +} % These are variants which are not "outer", so they can appear in @ifinfo. % Actually, they should now be obsolete; ordinary section commands should work. @@ -2949,8 +3579,7 @@ width0pt\relax} \fi % Define @majorheading, @heading and @subheading -% NOTE on use of \vbox for chapter headings, section headings, and -% such: +% NOTE on use of \vbox for chapter headings, section headings, and such: % 1) We use \vbox rather than the earlier \line to permit % overlong headings to fold. % 2) \hyphenpenalty is set to 10000 because hyphenation in a @@ -2997,12 +3626,12 @@ width0pt\relax} \fi \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} -\def\CHAPPAGoff{ +\def\CHAPPAGoff{% \global\let\contentsalignmacro = \chappager \global\let\pchapsepmacro=\chapbreak \global\let\pagealignmacro=\chappager} -\def\CHAPPAGon{ +\def\CHAPPAGon{% \global\let\contentsalignmacro = \chappager \global\let\pchapsepmacro=\chappager \global\let\pagealignmacro=\chappager @@ -3056,7 +3685,7 @@ width0pt\relax} \fi \def\unnchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\penalty 10000 % + \rm #1\hfill}}\bigskip \par\nobreak } \def\chfopen #1#2{\chapoddpage {\chapfonts @@ -3067,7 +3696,7 @@ width0pt\relax} \fi \def\centerchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt - \hfill {\rm #1}\hfill}}\bigskip \par\penalty 10000 % + \hfill {\rm #1}\hfill}}\bigskip \par\nobreak } \def\CHAPFopen{ @@ -3096,7 +3725,7 @@ width0pt\relax} \fi % Print any size section title. -% +% % #1 is the section type (sec/subsec/subsubsec), #2 is the section % number (maybe empty), #3 the text. \def\sectionheading#1#2#3{% @@ -3120,43 +3749,77 @@ width0pt\relax} \fi } -\message{toc printing,} -% Finish up the main text and prepare to read what we've written -% to \contentsfile. +\message{toc,} +% Table of contents. +\newwrite\tocfile + +% Write an entry to the toc file, opening it if necessary. +% Called from @chapter, etc. We supply {\folio} at the end of the +% argument, which will end up as the last argument to the \...entry macro. +% +% We open the .toc file here instead of at @setfilename or any other +% given time so that @contents can be put in the document anywhere. +% +\newif\iftocfileopened +\def\writetocentry#1{% + \iftocfileopened\else + \immediate\openout\tocfile = \jobname.toc + \global\tocfileopenedtrue + \fi + \iflinks \write\tocfile{#1{\folio}}\fi +} \newskip\contentsrightmargin \contentsrightmargin=1in +\newcount\savepageno +\newcount\lastnegativepageno \lastnegativepageno = -1 + +% Finish up the main text and prepare to read what we've written +% to \tocfile. +% \def\startcontents#1{% % If @setchapternewpage on, and @headings double, the contents should % start on an odd page, unlike chapters. Thus, we maintain % \contentsalignmacro in parallel with \pagealignmacro. % From: Torbjorn Granlund <tege@matematik.su.se> \contentsalignmacro - \immediate\closeout \contentsfile - \ifnum \pageno>0 - \pageno = -1 % Request roman numbered pages. - \fi + \immediate\closeout\tocfile + % % Don't need to put `Contents' or `Short Contents' in the headline. % It is abundantly clear what they are. \unnumbchapmacro{#1}\def\thischapter{}% + \savepageno = \pageno \begingroup % Set up to handle contents files properly. \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi + % We can't do this, because then an actual ^ in a section + % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. + %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi \raggedbottom % Worry more about breakpoints than the bottom. \advance\hsize by -\contentsrightmargin % Don't use the full line length. + % + % Roman numerals for page numbers. + \ifnum \pageno>0 \pageno = \lastnegativepageno \fi } % Normal (long) toc. -\outer\def\contents{% - \startcontents{\putwordTableofContents}% - \input \jobname.toc +\def\contents{% + \startcontents{\putwordTOC}% + \openin 1 \jobname.toc + \ifeof 1 \else + \closein 1 + \input \jobname.toc + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \pdfmakeoutlines \endgroup - \vfill \eject + \lastnegativepageno = \pageno + \pageno = \savepageno } % And just the chapters. -\outer\def\summarycontents{% - \startcontents{\putwordShortContents}% +\def\summarycontents{% + \startcontents{\putwordShortTOC}% % \let\chapentry = \shortchapentry \let\unnumbchapentry = \shortunnumberedentry @@ -3172,12 +3835,23 @@ width0pt\relax} \fi \def\unnumbsubsecentry ##1##2{} \def\subsubsecentry ##1##2##3##4##5##6{} \def\unnumbsubsubsecentry ##1##2{} - \input \jobname.toc + \openin 1 \jobname.toc + \ifeof 1 \else + \closein 1 + \input \jobname.toc + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect \endgroup - \vfill \eject + \lastnegativepageno = \pageno + \pageno = \savepageno } \let\shortcontents = \summarycontents +\ifpdf + \pdfcatalog{/PageMode /UseOutlines}% +\fi + % These macros generate individual entries in the table of contents. % The first argument is the chapter or section name. % The last argument is the page number. @@ -3188,7 +3862,7 @@ width0pt\relax} \fi % See comments in \dochapentry re vbox and related settings \def\shortchapentry#1#2#3{% - \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}% } % Typeset the label for a chapter or appendix for the short contents. @@ -3196,10 +3870,14 @@ width0pt\relax} \fi % We could simplify the code here by writing out an \appendixentry % command in the toc file for appendices, instead of using \chapentry % for both, but it doesn't seem worth it. -\setbox0 = \hbox{\shortcontrm \putwordAppendix } -\newdimen\shortappendixwidth \shortappendixwidth = \wd0 - +% +\newdimen\shortappendixwidth +% \def\shortchaplabel#1{% + % Compute width of word "Appendix", may change with language. + \setbox0 = \hbox{\shortcontrm \putwordAppendix}% + \shortappendixwidth = \wd0 + % % We typeset #1 in a box of constant width, regardless of the text of % #1, so the chapter titles will come out aligned. \setbox0 = \hbox{#1}% @@ -3214,7 +3892,7 @@ width0pt\relax} \fi } \def\unnumbchapentry#1#2{\dochapentry{#1}{#2}} -\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}} +\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno\bgroup#2\egroup}} % Sections. \def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} @@ -3241,35 +3919,36 @@ width0pt\relax} \fi \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip \begingroup \chapentryfonts - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup \nobreak\vskip .25\baselineskip plus.1\baselineskip } \def\dosecentry#1#2{\begingroup \secentryfonts \leftskip=\tocindent - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} \def\dosubsecentry#1#2{\begingroup \subsecentryfonts \leftskip=2\tocindent - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} \def\dosubsubsecentry#1#2{\begingroup \subsubsecentryfonts \leftskip=3\tocindent - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} % Final typesetting of a toc entry; we use the same \entry macro as for % the index entries, but we want to suppress hyphenation here. (We % can't do that in the \entry macro, since index entries might consist % of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.) -% -% \turnoffactive is for the sake of @" used for umlauts. \def\tocentry#1#2{\begingroup \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks - \entry{\turnoffactive #1}{\turnoffactive #2}% + % Do not use \turnoffactive in these arguments. Since the toc is + % typeset in cmr, so characters such as _ would come out wrong; we + % have to do the usual translation tricks. + \entry{#1}{#2}% \endgroup} % Space between chapter (or whatever) number and the title. @@ -3285,6 +3964,7 @@ width0pt\relax} \fi \message{environments,} +% @foo ... @end foo. % Since these characters are used in examples, it should be an even number of % \tt widths. Each \tt character is 1en, so two makes it 1em. @@ -3335,31 +4015,36 @@ width0pt\relax} \fi % But \@ or @@ will get a plain tex @ character. \def\tex{\begingroup -\catcode `\\=0 \catcode `\{=1 \catcode `\}=2 -\catcode `\$=3 \catcode `\&=4 \catcode `\#=6 -\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie -\catcode `\%=14 -\catcode 43=12 % plus -\catcode`\"=12 -\catcode`\==12 -\catcode`\|=12 -\catcode`\<=12 -\catcode`\>=12 -\escapechar=`\\ -% -\let\,=\ptexcomma -\let\~=\ptextilde -\let\{=\ptexlbrace -\let\}=\ptexrbrace -\let\.=\ptexdot -\let\*=\ptexstar -\let\dots=\ptexdots -\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}} -\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi} -\def\@{@}% -\let\bullet=\ptexbullet -\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext -% + \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 + \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 + \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie + \catcode `\%=14 + \catcode 43=12 % plus + \catcode`\"=12 + \catcode`\==12 + \catcode`\|=12 + \catcode`\<=12 + \catcode`\>=12 + \escapechar=`\\ + % + \let\b=\ptexb + \let\bullet=\ptexbullet + \let\c=\ptexc + \let\,=\ptexcomma + \let\.=\ptexdot + \let\dots=\ptexdots + \let\equiv=\ptexequiv + \let\!=\ptexexclam + \let\i=\ptexi + \let\{=\ptexlbrace + \let\+=\tabalign + \let\}=\ptexrbrace + \let\*=\ptexstar + \let\t=\ptext + % + \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% + \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% + \def\@{@}% \let\Etex=\endgroup} % Define @lisp ... @endlisp. @@ -3404,8 +4089,8 @@ width0pt\relax} \fi % \nonarrowing is a flag. If "set", @lisp etc don't narrow margins. \let\nonarrowing=\relax -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% \cartouche: draw rectangle w/rounded corners around argument +% @cartouche ... @end cartouche: draw rectangle w/rounded corners around +% environment contents. \font\circle=lcircle10 \newdimen\circthick \newdimen\cartouter\newdimen\cartinner @@ -3432,9 +4117,9 @@ width0pt\relax} \fi \cartinner=\hsize \advance\cartinner by-\lskip \advance\cartinner by-\rskip \cartouter=\hsize - \advance\cartouter by 18pt % allow for 3pt kerns on either + \advance\cartouter by 18.4pt % allow for 3pt kerns on either % side, and for 6pt waste from -% each corner char +% each corner char, and rule thickness \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip % Flag to tell @lisp, etc., not to narrow margin. \let\nonarrowing=\comment @@ -3488,48 +4173,52 @@ width0pt\relax} \fi \fi } -% To ending an @example-like environment, we first end the paragraph -% (via \afterenvbreak's vertical glue), and then the group. That way we -% keep the zero \parskip that the environments set -- \parskip glue -% will be inserted at the beginning of the next paragraph in the -% document, after the environment. +% Define the \E... control sequence only if we are inside the particular +% environment, so the error checking in \end will work. % -\def\nonfillfinish{\afterenvbreak\endgroup}% +% To end an @example-like environment, we first end the paragraph (via +% \afterenvbreak's vertical glue), and then the group. That way we keep +% the zero \parskip that the environments set -- \parskip glue will be +% inserted at the beginning of the next paragraph in the document, after +% the environment. +% +\def\nonfillfinish{\afterenvbreak\endgroup} -% This macro is +% @lisp: indented, narrowed, typewriter font. \def\lisp{\begingroup \nonfillstart \let\Elisp = \nonfillfinish \tt - \rawbackslash % have \ input char produce \ char from current font - \gobble + \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. + \gobble % eat return } -% Define the \E... control sequence only if we are inside the -% environment, so the error checking in \end will work. -% -% We must call \lisp last in the definition, since it reads the -% return following the @example (or whatever) command. -% +% @example: Same as @lisp. \def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp} -\def\smallexample{\begingroup \def\Esmallexample{\nonfillfinish\endgroup}\lisp} -\def\smalllisp{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}\lisp} -% @smallexample and @smalllisp. This is not used unless the @smallbook -% command is given. Originally contributed by Pavel@xerox. +% @small... is usually equivalent to the non-small (@smallbook +% redefines). We must call \example (or whatever) last in the +% definition, since it reads the return following the @example (or +% whatever) command. +% +% This actually allows (for example) @end display inside an +% @smalldisplay. Too bad, but makeinfo will catch the error anyway. % +\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display} +\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp} +\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format} +\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp} + +% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts. +% Originally contributed by Pavel@xerox. \def\smalllispx{\begingroup - \nonfillstart - \let\Esmalllisp = \nonfillfinish - \let\Esmallexample = \nonfillfinish - % - % Smaller fonts for small examples. - \indexfonts \tt - \rawbackslash % make \ output the \ character from the current font (tt) - \gobble + \def\Esmalllisp{\nonfillfinish\endgroup}% + \def\Esmallexample{\nonfillfinish\endgroup}% + \smallfonts + \lisp } -% This is @display; same as @lisp except use roman font. +% @display: same as @lisp except keep current font. % \def\display{\begingroup \nonfillstart @@ -3537,7 +4226,15 @@ width0pt\relax} \fi \gobble } -% This is @format; same as @display except don't narrow margins. +% @smalldisplay (when @smallbook): @display plus smaller fonts. +% +\def\smalldisplayx{\begingroup + \def\Esmalldisplay{\nonfillfinish\endgroup}% + \smallfonts \rm + \display +} + +% @format: same as @display except don't narrow margins. % \def\format{\begingroup \let\nonarrowing = t @@ -3546,20 +4243,27 @@ width0pt\relax} \fi \gobble } -% @flushleft (same as @format) and @flushright. +% @smallformat (when @smallbook): @format plus smaller fonts. % -\def\flushleft{\begingroup - \let\nonarrowing = t - \nonfillstart - \let\Eflushleft = \nonfillfinish - \gobble +\def\smallformatx{\begingroup + \def\Esmallformat{\nonfillfinish\endgroup}% + \smallfonts \rm + \format } + +% @flushleft (same as @format). +% +\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format} + +% @flushright. +% \def\flushright{\begingroup \let\nonarrowing = t \nonfillstart \let\Eflushright = \nonfillfinish \advance\leftskip by 0pt plus 1fill - \gobble} + \gobble +} % @quotation does normal linebreaking (hence we can't use \nonfillstart) % and narrows the margins. @@ -3582,9 +4286,11 @@ width0pt\relax} \fi \fi } + \message{defuns,} -% Define formatter for defuns -% First, allow user to change definition object font (\df) internally +% @defun etc. + +% Allow user to change definition object font (\df) internally \def\setdeffont #1 {\csname DEF#1\endcsname} \newskip\defbodyindent \defbodyindent=.4in @@ -3618,16 +4324,17 @@ width0pt\relax} \fi % Definitions of (, ) and & used in args for functions. % This is the definition of ( outside of all parentheses. -\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested % -\global\advance\parencount by 1 } +\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested + \global\advance\parencount by 1 +} % % This is the definition of ( when already inside a level of parens. \gdef\opnested{\char`\(\global\advance\parencount by 1 } % \gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. -% also in that case restore the outer-level definition of (. -\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi -\global\advance \parencount by -1 } + % also in that case restore the outer-level definition of (. + \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi + \global\advance \parencount by -1 } % If we encounter &foo, then turn on ()-hacking afterwards \gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } % @@ -3635,8 +4342,17 @@ width0pt\relax} \fi } % End of definition inside \activeparens %% These parens (in \boldbrax) actually are a little bolder than the %% contained text. This is especially needed for [ and ] -\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&} -\def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}} +\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 } +\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 } +\let\ampnr = \& +\def\lbrb{{\bf\char`\[}} +\def\rbrb{{\bf\char`\]}} + +% Active &'s sneak into the index arguments, so make sure it's defined. +{ + \catcode`& = 13 + \global\let& = \ampnr +} % First, defname, which formats the header line itself. % #1 should be the function name. @@ -3647,20 +4363,18 @@ width0pt\relax} \fi % outside the @def... \dimen2=\leftskip \advance\dimen2 by -\defbodyindent -\dimen3=\rightskip -\advance\dimen3 by -\defbodyindent -\noindent % +\noindent \setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}% \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line \dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations -\parshape 2 0in \dimen0 \defargsindent \dimen1 % +\parshape 2 0in \dimen0 \defargsindent \dimen1 % Now output arg 2 ("Function" or some such) % ending at \deftypemargin from the right margin, % but stuck inside a box of width 0 so it does not interfere with linebreaking {% Adjust \hsize to exclude the ambient margins, % so that \rightline will obey them. -\advance \hsize by -\dimen2 \advance \hsize by -\dimen3 -\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}% +\advance \hsize by -\dimen2 +\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}% % Make all lines underfull and no complaints: \tolerance=10000 \hbadness=10000 \advance\leftskip by -\defbodyindent @@ -3681,23 +4395,62 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2{\begingroup\obeylines\activeparens\spacesplit#3}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup % \catcode 61=\active % 61 is `=' \obeylines\activeparens\spacesplit#3} -\def\defmethparsebody #1#2#3#4 {\begingroup\inENV % +% #1 is the \E... control sequence to end the definition (which we define). +% #2 is the \...x control sequence for consecutive fns (which we define). +% #3 is the control sequence to call to resume processing. +% #4, delimited by the space, is the class name. +% +\def\defmethparsebody#1#2#3#4 {\begingroup\inENV % \medbreak % % Define the end token that this defining construct specifies % so that it will exit this group. \def#1{\endgraf\endgroup\medbreak}% \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\activeparens\spacesplit{#3{#4}}} +% Used for @deftypemethod and @deftypeivar. +% #1 is the \E... control sequence to end the definition (which we define). +% #2 is the \...x control sequence for consecutive fns (which we define). +% #3 is the control sequence to call to resume processing. +% #4, delimited by a space, is the class name. +% #5 is the method's return type. +% +\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV + \medbreak + \def#1{\endgraf\endgroup\medbreak}% + \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent + \begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}} + +% Used for @deftypeop. The change from \deftypemethparsebody is an +% extra argument at the beginning which is the `category', instead of it +% being the hardwired string `Method' or `Instance Variable'. We have +% to account for this both in the \...x definition and in parsing the +% input at hand. Thus also need a control sequence (passed as #5) for +% the \E... definition to assign the category name to. +% +\def\deftypeopparsebody#1#2#3#4#5 #6 {\begingroup\inENV + \medbreak + \def#1{\endgraf\endgroup\medbreak}% + \def#2##1 ##2 ##3 {% + \def#4{##1}% + \begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}% + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent + \begingroup\obeylines\activeparens\spacesplit{#3{#5}{#6}}} + \def\defopparsebody #1#2#3#4#5 {\begingroup\inENV % \medbreak % % Define the end token that this defining construct specifies @@ -3706,7 +4459,7 @@ width0pt\relax} \fi \def#2##1 ##2 {\def#4{##1}% \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\activeparens\spacesplit{#3{#5}}} @@ -3721,7 +4474,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2{\begingroup\obeylines\spacesplit#3}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup % \catcode 61=\active % @@ -3729,7 +4482,7 @@ width0pt\relax} \fi % This is used for \def{tp,vr}parsebody. It could probably be used for % some of the others, too, with some judicious conditionals. -% +% \def\parsebodycommon#1#2#3{% \begingroup\inENV % \medbreak % @@ -3738,7 +4491,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% \parindent=0in - \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent + \advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines } @@ -3763,17 +4516,16 @@ width0pt\relax} \fi } % Fine, but then we have to eventually remove the \empty *and* the -% braces (if any). That's what this does, putting the result in \tptemp. -% -\def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}% +% braces (if any). That's what this does. +% +\def\removeemptybraces\empty#1\relax{#1} % After \spacesplit has done its work, this is called -- #1 is the final % thing to call, #2 the type name (which starts with \empty), and #3 % (which might be empty) the arguments. -% +% \def\parsetpheaderline#1#2#3{% - \removeemptybraces#2\relax - #1{\tptemp}{#3}% + #1{\removeemptybraces#2\relax}{#3}% }% \def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV % @@ -3784,7 +4536,7 @@ width0pt\relax} \fi \def#2##1 ##2 {\def#4{##1}% \begingroup\obeylines\spacesplit{#3{##2}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\spacesplit{#3{#5}}} @@ -3808,16 +4560,17 @@ width0pt\relax} \fi % First, define the processing that is wanted for arguments of \defun % Use this to expand the args and terminate the paragraph they make up -\def\defunargs #1{\functionparens \sl +\def\defunargs#1{\functionparens \sl % Expand, preventing hyphenation at `-' chars. % Note that groups don't affect changes in \hyphenchar. -\hyphenchar\tensl=0 +% Set the font temporarily and use \font in case \setfont made \tensl a macro. +{\tensl\hyphenchar\font=0}% #1% -\hyphenchar\tensl=45 -\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi% +{\tensl\hyphenchar\font=45}% +\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi% \interlinepenalty=10000 \advance\rightskip by 0pt plus 1fil -\endgraf\penalty 10000\vskip -\parskip\penalty 10000% +\endgraf\nobreak\vskip -\parskip\nobreak } \def\deftypefunargs #1{% @@ -3828,7 +4581,7 @@ width0pt\relax} \fi \tclose{#1}% avoid \code because of side effects on active chars \interlinepenalty=10000 \advance\rightskip by 0pt plus 1fil -\endgraf\penalty 10000\vskip -\parskip\penalty 10000% +\endgraf\nobreak\vskip -\parskip\nobreak } % Do complete processing of one @defun or @defunx line already parsed. @@ -3847,7 +4600,7 @@ width0pt\relax} \fi \def\defun{\defparsebody\Edefun\defunx\defunheader} \def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{Function}% +\begingroup\defname {#1}{\putwordDeffunc}% \defunargs {#2}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } @@ -3861,7 +4614,7 @@ width0pt\relax} \fi % #1 is the data type, #2 the name, #3 the args. \def\deftypefunheaderx #1#2 #3\relax{% \doind {fn}{\code{#2}}% Make entry in function index -\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}% +\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypefun}% \deftypefunargs {#3}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } @@ -3892,7 +4645,7 @@ width0pt\relax} \fi \def\defmac{\defparsebody\Edefmac\defmacx\defmacheader} \def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{Macro}% +\begingroup\defname {#1}{\putwordDefmac}% \defunargs {#2}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } @@ -3902,42 +4655,77 @@ width0pt\relax} \fi \def\defspec{\defparsebody\Edefspec\defspecx\defspecheader} \def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{Special Form}% +\begingroup\defname {#1}{\putwordDefspec}% \defunargs {#2}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } -% This definition is run if you use @defunx -% anywhere other than immediately after a @defun or @defunx. - -\def\deffnx #1 {\errmessage{@deffnx in invalid context}} -\def\defunx #1 {\errmessage{@defunx in invalid context}} -\def\defmacx #1 {\errmessage{@defmacx in invalid context}} -\def\defspecx #1 {\errmessage{@defspecx in invalid context}} -\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}} -\def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}} - -% @defmethod, and so on - -% @defop {Funny Method} foo-class frobnicate argument - +% @defop CATEGORY CLASS OPERATION ARG... +% \def\defop #1 {\def\defoptype{#1}% \defopparsebody\Edefop\defopx\defopheader\defoptype} - -\def\defopheader #1#2#3{% -\dosubind {fn}{\code{#2}}{on #1}% Make entry in function index -\begingroup\defname {#2}{\defoptype{} on #1}% +% +\def\defopheader#1#2#3{% +\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index +\begingroup\defname {#2}{\defoptype\ \putwordon\ #1}% \defunargs {#3}\endgroup % } -% @defmethod == @defop Method +% @deftypeop CATEGORY CLASS TYPE OPERATION ARG... +% +\def\deftypeop #1 {\def\deftypeopcategory{#1}% + \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader + \deftypeopcategory} +% +% #1 is the class name, #2 the data type, #3 the operation name, #4 the args. +\def\deftypeopheader#1#2#3#4{% + \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index + \begingroup + \defname{\defheaderxcond#2\relax$$$#3} + {\deftypeopcategory\ \putwordon\ \code{#1}}% + \deftypefunargs{#4}% + \endgroup +} -\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} +% @deftypemethod CLASS TYPE METHOD ARG... +% +\def\deftypemethod{% + \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader} +% +% #1 is the class name, #2 the data type, #3 the method name, #4 the args. +\def\deftypemethodheader#1#2#3#4{% + \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index + \begingroup + \defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}% + \deftypefunargs{#4}% + \endgroup +} -\def\defmethodheader #1#2#3{% -\dosubind {fn}{\code{#2}}{on #1}% entry in function index -\begingroup\defname {#2}{Method on #1}% -\defunargs {#3}\endgroup % +% @deftypeivar CLASS TYPE VARNAME +% +\def\deftypeivar{% + \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader} +% +% #1 is the class name, #2 the data type, #3 the variable name. +\def\deftypeivarheader#1#2#3{% + \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index + \begingroup + \defname{#3}{\putwordInstanceVariableof\ \code{#1}}% + \defvarargs{#3}% + \endgroup +} + +% @defmethod == @defop Method +% +\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} +% +% #1 is the class name, #2 the method name, #3 the args. +\def\defmethodheader#1#2#3{% + \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index + \begingroup + \defname{#2}{\putwordMethodon\ \code{#1}}% + \defunargs{#3}% + \endgroup } % @defcv {Class Option} foo-class foo-flag @@ -3946,37 +4734,30 @@ width0pt\relax} \fi \defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype} \def\defcvarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{\defcvtype{} of #1}% +\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index +\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}% \defvarargs {#3}\endgroup % } -% @defivar == @defcv {Instance Variable} - +% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME +% \def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader} - -\def\defivarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{Instance Variable of #1}% -\defvarargs {#3}\endgroup % +% +\def\defivarheader#1#2#3{% + \dosubind {vr}{\code{#2}}{\putwordof\ #1}% entry in var index + \begingroup + \defname{#2}{\putwordInstanceVariableof\ #1}% + \defvarargs{#3}% + \endgroup } -% These definitions are run if you use @defmethodx, etc., -% anywhere other than immediately after a @defmethod, etc. - -\def\defopx #1 {\errmessage{@defopx in invalid context}} -\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}} -\def\defcvx #1 {\errmessage{@defcvx in invalid context}} -\def\defivarx #1 {\errmessage{@defivarx in invalid context}} - -% Now @defvar - +% @defvar % First, define the processing that is wanted for arguments of @defvar. % This is actually simple: just print them in roman. % This must expand the args and terminate the paragraph they make up \def\defvarargs #1{\normalparens #1% \interlinepenalty=10000 -\endgraf\penalty 10000\vskip -\parskip\penalty 10000} +\endgraf\nobreak\vskip -\parskip\nobreak} % @defvr Counter foo-count @@ -3990,7 +4771,7 @@ width0pt\relax} \fi \def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader} \def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{Variable}% +\begingroup\defname {#1}{\putwordDefvar}% \defvarargs {#2}\endgroup % } @@ -3999,7 +4780,7 @@ width0pt\relax} \fi \def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader} \def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{User Option}% +\begingroup\defname {#1}{\putwordDefopt}% \defvarargs {#2}\endgroup % } @@ -4007,33 +4788,26 @@ width0pt\relax} \fi \def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader} -% #1 is the data type. #2 is the name. +% #1 is the data type. #2 is the name, perhaps followed by text that +% is actually part of the data type, which should not be put into the index. \def\deftypevarheader #1#2{% -\doind {vr}{\code{#2}}% Make entry in variables index -\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}% +\dovarind#2 \relax% Make entry in variables index +\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypevar}% \interlinepenalty=10000 -\endgraf\penalty 10000\vskip -\parskip\penalty 10000 +\endgraf\nobreak\vskip -\parskip\nobreak \endgroup} +\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}} % @deftypevr {Global Flag} int enable \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader} -\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}% +\def\deftypevrheader #1#2#3{\dovarind#3 \relax% \begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1} \interlinepenalty=10000 -\endgraf\penalty 10000\vskip -\parskip\penalty 10000 +\endgraf\nobreak\vskip -\parskip\nobreak \endgroup} -% This definition is run if you use @defvarx -% anywhere other than immediately after a @defvar or @defvarx. - -\def\defvrx #1 {\errmessage{@defvrx in invalid context}} -\def\defvarx #1 {\errmessage{@defvarx in invalid context}} -\def\defoptx #1 {\errmessage{@defoptx in invalid context}} -\def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}} -\def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}} - % Now define @deftp % Args are printed in bold, a slight difference from @defvar. @@ -4046,51 +4820,394 @@ width0pt\relax} \fi \def\deftpheader #1#2#3{\doind {tp}{\code{#2}}% \begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup} -% This definition is run if you use @deftpx, etc -% anywhere other than immediately after a @deftp, etc. +% These definitions are used if you use @defunx (etc.) +% anywhere other than immediately after a @defun or @defunx. +% +\def\defcvx#1 {\errmessage{@defcvx in invalid context}} +\def\deffnx#1 {\errmessage{@deffnx in invalid context}} +\def\defivarx#1 {\errmessage{@defivarx in invalid context}} +\def\defmacx#1 {\errmessage{@defmacx in invalid context}} +\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}} +\def\defoptx #1 {\errmessage{@defoptx in invalid context}} +\def\defopx#1 {\errmessage{@defopx in invalid context}} +\def\defspecx#1 {\errmessage{@defspecx in invalid context}} +\def\deftpx#1 {\errmessage{@deftpx in invalid context}} +\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}} +\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}} +\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}} +\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}} +\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}} +\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}} +\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}} +\def\defunx#1 {\errmessage{@defunx in invalid context}} +\def\defvarx#1 {\errmessage{@defvarx in invalid context}} +\def\defvrx#1 {\errmessage{@defvrx in invalid context}} + + +\message{macros,} +% @macro. + +% To do this right we need a feature of e-TeX, \scantokens, +% which we arrange to emulate with a temporary file in ordinary TeX. +\ifx\eTeXversion\undefined + \newwrite\macscribble + \def\scanmacro#1{% + \begingroup \newlinechar`\^^M + % Undo catcode changes of \startcontents and \doprintindex + \catcode`\@=0 \catcode`\\=12 \escapechar=`\@ + % Append \endinput to make sure that TeX does not see the ending newline. + \toks0={#1\endinput}% + \immediate\openout\macscribble=\jobname.tmp + \immediate\write\macscribble{\the\toks0}% + \immediate\closeout\macscribble + \let\xeatspaces\eatspaces + \input \jobname.tmp + \endgroup +} +\else +\def\scanmacro#1{% +\begingroup \newlinechar`\^^M +% Undo catcode changes of \startcontents and \doprintindex +\catcode`\@=0 \catcode`\\=12 \escapechar=`\@ +\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup} +\fi + +\newcount\paramno % Count of parameters +\newtoks\macname % Macro name +\newif\ifrecursive % Is it recursive? +\def\macrolist{} % List of all defined macros in the form + % \do\macro1\do\macro2... + +% Utility routines. +% Thisdoes \let #1 = #2, except with \csnames. +\def\cslet#1#2{% +\expandafter\expandafter +\expandafter\let +\expandafter\expandafter +\csname#1\endcsname +\csname#2\endcsname} + +% Trim leading and trailing spaces off a string. +% Concepts from aro-bend problem 15 (see CTAN). +{\catcode`\@=11 +\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }} +\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@} +\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @} +\def\unbrace#1{#1} +\unbrace{\gdef\trim@@@ #1 } #2@{#1} +} + +% Trim a single trailing ^^M off a string. +{\catcode`\^^M=12\catcode`\Q=3% +\gdef\eatcr #1{\eatcra #1Q^^MQ}% +\gdef\eatcra#1^^MQ{\eatcrb#1Q}% +\gdef\eatcrb#1Q#2Q{#1}% +} + +% Macro bodies are absorbed as an argument in a context where +% all characters are catcode 10, 11 or 12, except \ which is active +% (as in normal texinfo). It is necessary to change the definition of \. + +% It's necessary to have hard CRs when the macro is executed. This is +% done by making ^^M (\endlinechar) catcode 12 when reading the macro +% body, and then making it the \newlinechar in \scanmacro. + +\def\macrobodyctxt{% + \catcode`\~=12 + \catcode`\^=12 + \catcode`\_=12 + \catcode`\|=12 + \catcode`\<=12 + \catcode`\>=12 + \catcode`\+=12 + \catcode`\{=12 + \catcode`\}=12 + \catcode`\@=12 + \catcode`\^^M=12 + \usembodybackslash} + +\def\macroargctxt{% + \catcode`\~=12 + \catcode`\^=12 + \catcode`\_=12 + \catcode`\|=12 + \catcode`\<=12 + \catcode`\>=12 + \catcode`\+=12 + \catcode`\@=12 + \catcode`\\=12} + +% \mbodybackslash is the definition of \ in @macro bodies. +% It maps \foo\ => \csname macarg.foo\endcsname => #N +% where N is the macro parameter number. +% We define \csname macarg.\endcsname to be \realbackslash, so +% \\ in macro replacement text gets you a backslash. + +{\catcode`@=0 @catcode`@\=@active + @gdef@usembodybackslash{@let\=@mbodybackslash} + @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} +} +\expandafter\def\csname macarg.\endcsname{\realbackslash} + +\def\macro{\recursivefalse\parsearg\macroxxx} +\def\rmacro{\recursivetrue\parsearg\macroxxx} + +\def\macroxxx#1{% + \getargs{#1}% now \macname is the macname and \argl the arglist + \ifx\argl\empty % no arguments + \paramno=0% + \else + \expandafter\parsemargdef \argl;% + \fi + \if1\csname ismacro.\the\macname\endcsname + \message{Warning: redefining \the\macname}% + \else + \expandafter\ifx\csname \the\macname\endcsname \relax + \else \errmessage{The name \the\macname\space is reserved}\fi + \global\cslet{macsave.\the\macname}{\the\macname}% + \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% + % Add the macroname to \macrolist + \toks0 = \expandafter{\macrolist\do}% + \xdef\macrolist{\the\toks0 + \expandafter\noexpand\csname\the\macname\endcsname}% + \fi + \begingroup \macrobodyctxt + \ifrecursive \expandafter\parsermacbody + \else \expandafter\parsemacbody + \fi} + +\def\unmacro{\parsearg\unmacroxxx} +\def\unmacroxxx#1{% + \if1\csname ismacro.#1\endcsname + \global\cslet{#1}{macsave.#1}% + \global\expandafter\let \csname ismacro.#1\endcsname=0% + % Remove the macro name from \macrolist + \begingroup + \edef\tempa{\expandafter\noexpand\csname#1\endcsname}% + \def\do##1{% + \def\tempb{##1}% + \ifx\tempa\tempb + % remove this + \else + \toks0 = \expandafter{\newmacrolist\do}% + \edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}% + \fi}% + \def\newmacrolist{}% + % Execute macro list to define \newmacrolist + \macrolist + \global\let\macrolist\newmacrolist + \endgroup + \else + \errmessage{Macro #1 not defined}% + \fi +} + +% This makes use of the obscure feature that if the last token of a +% <parameter list> is #, then the preceding argument is delimited by +% an opening brace, and that opening brace is not consumed. +\def\getargs#1{\getargsxxx#1{}} +\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} +\def\getmacname #1 #2\relax{\macname={#1}} +\def\getmacargs#1{\def\argl{#1}} + +% Parse the optional {params} list. Set up \paramno and \paramlist +% so \defmacro knows what to do. Define \macarg.blah for each blah +% in the params list, to be ##N where N is the position in that list. +% That gets used by \mbodybackslash (above). + +% We need to get `macro parameter char #' into several definitions. +% The technique used is stolen from LaTeX: let \hash be something +% unexpandable, insert that wherever you need a #, and then redefine +% it to # just before using the token list produced. +% +% The same technique is used to protect \eatspaces till just before +% the macro is used. + +\def\parsemargdef#1;{\paramno=0\def\paramlist{}% + \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,} +\def\parsemargdefxxx#1,{% + \if#1;\let\next=\relax + \else \let\next=\parsemargdefxxx + \advance\paramno by 1% + \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname + {\xeatspaces{\hash\the\paramno}}% + \edef\paramlist{\paramlist\hash\the\paramno,}% + \fi\next} + +% These two commands read recursive and nonrecursive macro bodies. +% (They're different since rec and nonrec macros end differently.) + +\long\def\parsemacbody#1@end macro% +{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% +\long\def\parsermacbody#1@end rmacro% +{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% + +% This defines the macro itself. There are six cases: recursive and +% nonrecursive macros of zero, one, and many arguments. +% Much magic with \expandafter here. +% \xdef is used so that macro definitions will survive the file +% they're defined in; @include reads the file inside a group. +\def\defmacro{% + \let\hash=##% convert placeholders to macro parameter chars + \ifrecursive + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\scanmacro{\temp}}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname xxx\endcsname}% + \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup\noexpand\scanmacro{\temp}}% + \else % many + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{\egroup\noexpand\scanmacro{\temp}}% + \fi + \else + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname xxx\endcsname}% + \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \else % many + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \expandafter\noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \fi + \fi} + +\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} + +% \braceorline decides whether the next nonwhitespace character is a +% {. If so it reads up to the closing }, if not, it reads the whole +% line. Whatever was read is then fed to the next control sequence +% as an argument (by \parsebrace or \parsearg) +\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx} +\def\braceorlinexxx{% + \ifx\nchar\bgroup\else + \expandafter\parsearg + \fi \next} -\def\deftpx #1 {\errmessage{@deftpx in invalid context}} +% We mant to disable all macros during \shipout so that they are not +% expanded by \write. +\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% + \edef\next{\macrolist}\expandafter\endgroup\next} -\message{cross reference,} -% Define cross-reference macros -\newwrite \auxfile +% @alias. +% We need some trickery to remove the optional spaces around the equal +% sign. Just make them active and then expand them all to nothing. +\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx} +\def\aliasxxx #1{\aliasyyy#1\relax} +\def\aliasyyy #1=#2\relax{\ignoreactivespaces +\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=% + \expandafter\noexpand\csname#2\endcsname}% +\expandafter\endgroup\next} -\newif\ifhavexrefs % True if xref values are known. + +\message{cross references,} +% @xref etc. + +\newwrite\auxfile + +\newif\ifhavexrefs % True if xref values are known. \newif\ifwarnedxrefs % True if we warned once that they aren't known. -% @inforef is simple. +% @inforef is relatively simple. \def\inforef #1{\inforefzzz #1,,,,**} \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, node \samp{\ignorespaces#1{}}} -% \setref{foo} defines a cross-reference point named foo. +% @node's job is to define \lastnode. +\def\node{\ENVcheck\parsearg\nodezzz} +\def\nodezzz#1{\nodexxx [#1,]} +\def\nodexxx[#1,#2]{\gdef\lastnode{#1}} +\let\nwnode=\node +\let\lastnode=\relax -\def\setref#1{% -\dosetq{#1-title}{Ytitle}% -\dosetq{#1-pg}{Ypagenumber}% -\dosetq{#1-snt}{Ysectionnumberandtype}} +% The sectioning commands (@chapter, etc.) call these. +\def\donoderef{% + \ifx\lastnode\relax\else + \expandafter\expandafter\expandafter\setref{\lastnode}% + {Ysectionnumberandtype}% + \global\let\lastnode=\relax + \fi +} +\def\unnumbnoderef{% + \ifx\lastnode\relax\else + \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}% + \global\let\lastnode=\relax + \fi +} +\def\appendixnoderef{% + \ifx\lastnode\relax\else + \expandafter\expandafter\expandafter\setref{\lastnode}% + {Yappendixletterandtype}% + \global\let\lastnode=\relax + \fi +} -\def\unnumbsetref#1{% -\dosetq{#1-title}{Ytitle}% -\dosetq{#1-pg}{Ypagenumber}% -\dosetq{#1-snt}{Ynothing}} -\def\appendixsetref#1{% -\dosetq{#1-title}{Ytitle}% -\dosetq{#1-pg}{Ypagenumber}% -\dosetq{#1-snt}{Yappendixletterandtype}} +% @anchor{NAME} -- define xref target at arbitrary point. +% +\newcount\savesfregister +\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} +\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} +\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} + +% \setref{NAME}{SNT} defines a cross-reference point NAME, namely +% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have +% to set \indexdummies so commands such as @code in a section title +% aren't expanded. It would be nicer not to expand the titles in the +% first place, but there's so many layers that that is hard to do. +% +\def\setref#1#2{{% + \indexdummies + \pdfmkdest{#1}% + \dosetq{#1-title}{Ytitle}% + \dosetq{#1-pg}{Ypagenumber}% + \dosetq{#1-snt}{#2}% +}} -% \xref, \pxref, and \ref generate cross-references to specified points. -% For \xrefX, #1 is the node name, #2 the name of the Info -% cross-reference, #3 the printed node name, #4 the name of the Info -% file, #5 the name of the printed manual. All but the node name can be -% omitted. +% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is +% the node name, #2 the name of the Info cross-reference, #3 the printed +% node name, #4 the name of the Info file, #5 the name of the printed +% manual. All but the node name can be omitted. % \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} \def\ref#1{\xrefX[#1,,,,,,,]} \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup + \unsepspaces \def\printedmanual{\ignorespaces #5}% \def\printednodename{\ignorespaces #3}% \setbox1=\hbox{\printedmanual}% @@ -4103,7 +5220,7 @@ width0pt\relax} \fi \else % Use the actual chapter/section title appear inside % the square brackets. Use the real section title if we have it. - \ifdim \wd1>0pt% + \ifdim \wd1 > 0pt % It is in another manual, so we don't have it. \def\printednodename{\ignorespaces #1}% \else @@ -4124,27 +5241,54 @@ width0pt\relax} \fi % are best written with fairly long node names, containing hyphens, this % is a loss. Therefore, we give the text of the node name again, so it % is as if TeX is seeing it for the first time. + \ifpdf + \leavevmode + \getfilename{#4}% + \ifnum\filenamelength>0 + \startlink attr{/Border [0 0 0]}% + goto file{\the\filename.pdf} name{#1@}% + \else + \startlink attr{/Border [0 0 0]}% + goto name{#1@}% + \fi + \linkcolor + \fi + % \ifdim \wd1 > 0pt - \putwordsection{} ``\printednodename'' in \cite{\printedmanual}% + \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}% \else % _ (for example) has to be the character _ for the purposes of the % control sequence corresponding to the node, but it has to expand % into the usual \leavevmode...\vrule stuff for purposes of % printing. So we \turnoffactive for the \refx-snt, back on for the % printing, back off for the \refx-pg. - {\turnoffactive \refx{#1-snt}{}}% - \space [\printednodename],\space + {\normalturnoffactive + % Only output a following space if the -snt ref is nonempty; for + % @unnumbered and @anchor, it won't be. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi + }% + % [mynode], + [\printednodename],\space + % page 3 \turnoffactive \putwordpage\tie\refx{#1-pg}{}% \fi + \endlink \endgroup} % \dosetq is the interface for calls from other macros -% Use \turnoffactive so that punctuation chars such as underscore -% work in node names. -\def\dosetq #1#2{{\let\folio=0 \turnoffactive \auxhat% -\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}% -\next}} +% Use \normalturnoffactive so that punctuation chars such as underscore +% and backslash work in node names. (\turnoffactive doesn't do \.) +\def\dosetq#1#2{% + {\let\folio=0% + \normalturnoffactive + \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}% + \iflinks + \next + \fi + }% +} % \internalsetq {foo}{page} expands into % CHARACTERS 'xrdef {foo}{...expansion of \Ypage...} @@ -4195,13 +5339,15 @@ width0pt\relax} \fi \def\refx#1#2{% \expandafter\ifx\csname X#1\endcsname\relax % If not defined, say something at least. - $\langle$un\-de\-fined$\rangle$% - \ifhavexrefs - \message{\linenumber Undefined cross reference `#1'.}% - \else - \ifwarnedxrefs\else - \global\warnedxrefstrue - \message{Cross reference values unknown; you must run TeX again.}% + \angleleft un\-de\-fined\angleright + \iflinks + \ifhavexrefs + \message{\linenumber Undefined cross reference `#1'.}% + \else + \ifwarnedxrefs\else + \global\warnedxrefstrue + \message{Cross reference values unknown; you must run TeX again.}% + \fi \fi \fi \else @@ -4211,84 +5357,101 @@ width0pt\relax} \fi #2% Output the suffix in any case. } -% Read the last existing aux file, if any. No error if none exists. - % This is the macro invoked by entries in the aux file. -\def\xrdef #1#2{ -{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}} +% +\def\xrdef#1{\begingroup + % Reenable \ as an escape while reading the second argument. + \catcode`\\ = 0 + \afterassignment\endgroup + \expandafter\gdef\csname X#1\endcsname +} -\def\readauxfile{% -\begingroup -\catcode `\^^@=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\^^C=\other -\catcode `\^^D=\other -\catcode `\^^E=\other -\catcode `\^^F=\other -\catcode `\^^G=\other -\catcode `\^^H=\other -\catcode `\ =\other -\catcode `\^^L=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode 26=\other -\catcode `\^^[=\other -\catcode `\^^\=\other -\catcode `\^^]=\other -\catcode `\^^^=\other -\catcode `\^^_=\other -\catcode `\@=\other -\catcode `\^=\other -\catcode `\~=\other -\catcode `\[=\other -\catcode `\]=\other -\catcode`\"=\other -\catcode`\_=\other -\catcode`\|=\other -\catcode`\<=\other -\catcode`\>=\other -\catcode `\$=\other -\catcode `\#=\other -\catcode `\&=\other -% `\+ does not work, so use 43. -\catcode 43=\other -% Make the characters 128-255 be printing characters -{% - \count 1=128 - \def\loop{% - \catcode\count 1=\other - \advance\count 1 by 1 - \ifnum \count 1<256 \loop \fi +% Read the last existing aux file, if any. No error if none exists. +\def\readauxfile{\begingroup + \catcode`\^^@=\other + \catcode`\^^A=\other + \catcode`\^^B=\other + \catcode`\^^C=\other + \catcode`\^^D=\other + \catcode`\^^E=\other + \catcode`\^^F=\other + \catcode`\^^G=\other + \catcode`\^^H=\other + \catcode`\^^K=\other + \catcode`\^^L=\other + \catcode`\^^N=\other + \catcode`\^^P=\other + \catcode`\^^Q=\other + \catcode`\^^R=\other + \catcode`\^^S=\other + \catcode`\^^T=\other + \catcode`\^^U=\other + \catcode`\^^V=\other + \catcode`\^^W=\other + \catcode`\^^X=\other + \catcode`\^^Z=\other + \catcode`\^^[=\other + \catcode`\^^\=\other + \catcode`\^^]=\other + \catcode`\^^^=\other + \catcode`\^^_=\other + \catcode`\@=\other + \catcode`\^=\other + % It was suggested to define this as 7, which would allow ^^e4 etc. + % in xref tags, i.e., node names. But since ^^e4 notation isn't + % supported in the main text, it doesn't seem desirable. Furthermore, + % that is not enough: for node names that actually contain a ^ + % character, we would end up writing a line like this: 'xrdef {'hat + % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first + % argument, and \hat is not an expandable control sequence. It could + % all be worked out, but why? Either we support ^^ or we don't. + % + % The other change necessary for this was to define \auxhat: + % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter + % and then to call \auxhat in \setq. + % + \catcode`\~=\other + \catcode`\[=\other + \catcode`\]=\other + \catcode`\"=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\$=\other + \catcode`\#=\other + \catcode`\&=\other + \catcode`+=\other % avoid \+ for paranoia even though we've turned it off + % Make the characters 128-255 be printing characters + {% + \count 1=128 + \def\loop{% + \catcode\count 1=\other + \advance\count 1 by 1 + \ifnum \count 1<256 \loop \fi + }% }% -}% -% the aux file uses ' as the escape. -% Turn off \ as an escape so we do not lose on -% entries which were dumped with control sequences in their names. -% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ -% Reference to such entries still does not work the way one would wish, -% but at least they do not bomb out when the aux file is read in. -\catcode `\{=1 \catcode `\}=2 -\catcode `\%=\other -\catcode `\'=0 -\catcode`\^=7 % to make ^^e4 etc usable in xref tags -\catcode `\\=\other -\openin 1 \jobname.aux -\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue -\global\warnedobstrue -\fi -% Open the new aux file. Tex will close it automatically at exit. -\openout \auxfile=\jobname.aux + % The aux file uses ' as the escape (for now). + % Turn off \ as an escape so we do not lose on + % entries which were dumped with control sequences in their names. + % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ + % Reference to such entries still does not work the way one would wish, + % but at least they do not bomb out when the aux file is read in. + \catcode`\{=1 + \catcode`\}=2 + \catcode`\%=\other + \catcode`\'=0 + \catcode`\\=\other + % + \openin 1 \jobname.aux + \ifeof 1 \else + \closein 1 + \input \jobname.aux + \global\havexrefstrue + \global\warnedobstrue + \fi + % Open the new aux file. TeX will close it automatically at exit. + \openout\auxfile=\jobname.aux \endgroup} @@ -4303,7 +5466,7 @@ width0pt\relax} \fi % space to prevent strange expansion errors.) \def\supereject{\par\penalty -20000\footnoteno =0 } -% @footnotestyle is meaningful for info output only.. +% @footnotestyle is meaningful for info output only. \let\footnotestyle=\comment \let\ptexfootnote=\footnote @@ -4329,7 +5492,11 @@ width0pt\relax} \fi % Don't bother with the trickery in plain.tex to not require the % footnote text as a parameter. Our footnotes don't need to be so general. % -\long\gdef\footnotezzz#1{\insert\footins{% +% Oh yes, they do; otherwise, @ifset and anything else that uses +% \parseargline fail inside footnotes because the tokens are fixed when +% the footnote is read. --karl, 16nov96. +% +\long\gdef\footnotezzz{\insert\footins\bgroup % We want to typeset this text as a normal paragraph, even if the % footnote reference occurs in (for example) a display environment. % So reset some parameters. @@ -4343,6 +5510,8 @@ width0pt\relax} \fi \xspaceskip\z@skip \parindent\defaultparindent % + \smallfonts \rm + % % Hang the footnote text off the number. \hang \textindent{\thisfootno}% @@ -4351,8 +5520,13 @@ width0pt\relax} \fi % expands into a box, it must come within the paragraph, lest it % provide a place where TeX can split the footnote. \footstrut - #1\strut}% + \futurelet\next\fo@t } +\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t + \else\let\next\f@t\fi \next} +\def\f@@t{\bgroup\aftergroup\@foot\let\next} +\def\f@t#1{#1\@foot} +\def\@foot{\strut\par\egroup} }%end \catcode `\@=11 @@ -4409,36 +5583,117 @@ width0pt\relax} \fi % \def\finalout{\overfullrule=0pt} +% @image. We use the macros from epsf.tex to support this. +% If epsf.tex is not installed and @image is used, we complain. +% +% Check for and read epsf.tex up front. If we read it only at @image +% time, we might be inside a group, and then its definitions would get +% undone and the next image would fail. +\openin 1 = epsf.tex +\ifeof 1 \else + \closein 1 + % Do not bother showing banner with post-v2.7 epsf.tex (available in + % doc/epsf.tex until it shows up on ctan). + \def\epsfannounce{\toks0 = }% + \input epsf.tex +\fi +% +% We will only complain once about lack of epsf.tex. +\newif\ifwarnednoepsf +\newhelp\noepsfhelp{epsf.tex must be installed for images to + work. It is also included in the Texinfo distribution, or you can get + it from ftp://tug.org/tex/epsf.tex.} +% +\def\image#1{% + \ifx\epsfbox\undefined + \ifwarnednoepsf \else + \errhelp = \noepsfhelp + \errmessage{epsf.tex not found, images will be ignored}% + \global\warnednoepsftrue + \fi + \else + \imagexxx #1,,,\finish + \fi +} +% +% Arguments to @image: +% #1 is (mandatory) image filename; we tack on .eps extension. +% #2 is (optional) width, #3 is (optional) height. +% #4 is just the usual extra ignored arg for parsing this stuff. +\def\imagexxx#1,#2,#3,#4\finish{% + \ifpdf + \centerline{\dopdfimage{#1}{#2}{#3}}% + \else + % \epsfbox itself resets \epsf?size at each figure. + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi + \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi + \begingroup + \catcode`\^^M = 5 % in case we're inside an example + % If the image is by itself, center it. + \ifvmode + \nobreak\bigskip + % Usually we'll have text after the image which will insert + % \parskip glue, so insert it here too to equalize the space + % above and below. + \nobreak\vskip\parskip + \nobreak + \centerline{\epsfbox{#1.eps}}% + \bigbreak + \else + % In the middle of a paragraph, no extra space. + \epsfbox{#1.eps}% + \fi + \endgroup + \fi +} -% End of control word definitions. -\message{and turning on texinfo input format.} +\message{localization,} +% and i18n. -\def\openindices{% - \newindex{cp}% - \newcodeindex{fn}% - \newcodeindex{vr}% - \newcodeindex{tp}% - \newcodeindex{ky}% - \newcodeindex{pg}% +% @documentlanguage is usually given very early, just after +% @setfilename. If done too late, it may not override everything +% properly. Single argument is the language abbreviation. +% It would be nice if we could set up a hyphenation file here. +% +\def\documentlanguage{\parsearg\dodocumentlanguage} +\def\dodocumentlanguage#1{% + \tex % read txi-??.tex file in plain TeX. + % Read the file if it exists. + \openin 1 txi-#1.tex + \ifeof1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \let\temp = \relax + \else + \def\temp{\input txi-#1.tex }% + \fi + \temp + \endgroup } +\newhelp\nolanghelp{The given language definition file cannot be found or +is empty. Maybe you need to install it? In the current directory +should work if nowhere else does.} + -% Set some numeric style parameters, for 8.5 x 11 format. +% @documentencoding should change something in TeX eventually, most +% likely, but for now just recognize it. +\let\documentencoding = \comment -\hsize = 6in -\hoffset = .25in + +% Page size parameters. +% \newdimen\defaultparindent \defaultparindent = 15pt -\parindent = \defaultparindent -\parskip 3pt plus 2pt minus 1pt -\setleading{13.2pt} -\advance\topskip by 1.2cm \chapheadingskip = 15pt plus 4pt minus 2pt \secheadingskip = 12pt plus 3pt minus 2pt \subsecheadingskip = 9pt plus 2pt minus 2pt % Prevent underfull vbox error messages. -\vbadness=10000 +\vbadness = 10000 + +% Don't be so finicky about underfull hboxes, either. +\hbadness = 2000 % Following George Bush, just get rid of widows and orphans. \widowpenalty=10000 @@ -4447,101 +5702,125 @@ width0pt\relax} \fi % Use TeX 3.0's \emergencystretch to help line breaking, but if we're % using an old version of TeX, don't do anything. We want the amount of % stretch added to depend on the line length, hence the dependence on -% \hsize. This makes it come to about 9pt for the 8.5x11 format. +% \hsize. We call this whenever the paper size is set. % -\ifx\emergencystretch\thisisundefined - % Allow us to assign to \emergencystretch anyway. - \def\emergencystretch{\dimen0}% -\else - \emergencystretch = \hsize - \divide\emergencystretch by 45 -\fi +\def\setemergencystretch{% + \ifx\emergencystretch\thisisundefined + % Allow us to assign to \emergencystretch anyway. + \def\emergencystretch{\dimen0}% + \else + \emergencystretch = .15\hsize + \fi +} -% Use @smallbook to reset parameters for 7x9.5 format (or else 7x9.25) -\def\smallbook{ - \global\chapheadingskip = 15pt plus 4pt minus 2pt - \global\secheadingskip = 12pt plus 3pt minus 2pt - \global\subsecheadingskip = 9pt plus 2pt minus 2pt +% Parameters in order: 1) textheight; 2) textwidth; 3) voffset; +% 4) hoffset; 5) binding offset; 6) topskip. Then whoever calls us can +% set \parskip and call \setleading for \baselineskip. +% +\def\internalpagesizes#1#2#3#4#5#6{% + \voffset = #3\relax + \topskip = #6\relax + \splittopskip = \topskip % - \global\lispnarrowing = 0.3in - \setleading{12pt} - \advance\topskip by -1cm - \global\parskip 2pt plus 1pt - \global\hsize = 5in - \global\vsize=7.5in - \global\tolerance=700 - \global\hfuzz=1pt - \global\contentsrightmargin=0pt - \global\deftypemargin=0pt - \global\defbodyindent=.5cm + \vsize = #1\relax + \advance\vsize by \topskip + \outervsize = \vsize + \advance\outervsize by 2\topandbottommargin + \pageheight = \vsize % - \global\pagewidth=\hsize - \global\pageheight=\vsize + \hsize = #2\relax + \outerhsize = \hsize + \advance\outerhsize by 0.5in + \pagewidth = \hsize % - \global\let\smalllisp=\smalllispx - \global\let\smallexample=\smalllispx - \global\def\Esmallexample{\Esmalllisp} + \normaloffset = #4\relax + \bindingoffset = #5\relax + % + \parindent = \defaultparindent + \setemergencystretch } +% @letterpaper (the default). +\def\letterpaper{{\globaldefs = 1 + \parskip = 3pt plus 2pt minus 1pt + \setleading{13.2pt}% + % + % If page is nothing but text, make it come out even. + \internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}% +}} + +% Use @smallbook to reset parameters for 7x9.5 (or so) format. +\def\smallbook{{\globaldefs = 1 + \parskip = 2pt plus 1pt + \setleading{12pt}% + % + \internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}% + % + \lispnarrowing = 0.3in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \deftypemargin = 0pt + \defbodyindent = .5cm + % + \let\smalldisplay = \smalldisplayx + \let\smallexample = \smalllispx + \let\smallformat = \smallformatx + \let\smalllisp = \smalllispx +}} + % Use @afourpaper to print on European A4 paper. -\def\afourpaper{ -\global\tolerance=700 -\global\hfuzz=1pt -\setleading{12pt} -\global\parskip 15pt plus 1pt - -\global\vsize= 53\baselineskip -\advance\vsize by \topskip -%\global\hsize= 5.85in % A4 wide 10pt -\global\hsize= 6.5in -\global\outerhsize=\hsize -\global\advance\outerhsize by 0.5in -\global\outervsize=\vsize -\global\advance\outervsize by 0.6in - -\global\pagewidth=\hsize -\global\pageheight=\vsize -} - -\bindingoffset=0pt -\normaloffset=\hoffset -\pagewidth=\hsize -\pageheight=\vsize - -% Allow control of the text dimensions. Parameters in order: textheight; -% textwidth; voffset; hoffset; binding offset; topskip. -% All require a dimension; -% header is additional; added length extends the bottom of the page. - -\def\changepagesizes#1#2#3#4#5#6{ - \global\vsize= #1 - \global\topskip= #6 - \advance\vsize by \topskip - \global\voffset= #3 - \global\hsize= #2 - \global\outerhsize=\hsize - \global\advance\outerhsize by 0.5in - \global\outervsize=\vsize - \global\advance\outervsize by 0.6in - \global\pagewidth=\hsize - \global\pageheight=\vsize - \global\normaloffset= #4 - \global\bindingoffset= #5} +\def\afourpaper{{\globaldefs = 1 + \setleading{12pt}% + \parskip = 3pt plus 2pt minus 1pt + % + \internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}% + % + \tolerance = 700 + \hfuzz = 1pt +}} % A specific text layout, 24x15cm overall, intended for A4 paper. Top margin % 29mm, hence bottom margin 28mm, nominal side margin 3cm. -\def\afourlatex - {\global\tolerance=700 - \global\hfuzz=1pt - \setleading{12pt} - \global\parskip 15pt plus 1pt - \advance\baselineskip by 1.6pt - \changepagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm} - } +\def\afourlatex{{\globaldefs = 1 + \setleading{13.6pt}% + % + \afourpaper + \internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}% + % + \globaldefs = 0 +}} % Use @afourwide to print on European A4 paper in wide format. -\def\afourwide{\afourpaper -\changepagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}} +\def\afourwide{% + \afourpaper + \internalpagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}% + % + \globaldefs = 0 +} + +% @pagesizes TEXTHEIGHT[,TEXTWIDTH] +% Perhaps we should allow setting the margins, \topskip, \parskip, +% and/or leading, also. Or perhaps we should compute them somehow. +% +\def\pagesizes{\parsearg\pagesizesxxx} +\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish} +\def\pagesizesyyy#1,#2,#3\finish{{% + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi + \globaldefs = 1 + % + \parskip = 3pt plus 2pt minus 1pt + \setleading{13.2pt}% + % + \internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}% +}} + +% Set default to letter. +% +\letterpaper + + +\message{and turning on texinfo input format.} % Define macros to output various characters with catcode for normal text. \catcode`\"=\other @@ -4552,6 +5831,7 @@ width0pt\relax} \fi \catcode`\<=\other \catcode`\>=\other \catcode`\+=\other +\catcode`\$=\other \def\normaldoublequote{"} \def\normaltilde{~} \def\normalcaret{^} @@ -4560,6 +5840,7 @@ width0pt\relax} \fi \def\normalless{<} \def\normalgreater{>} \def\normalplus{+} +\def\normaldollar{$} % This macro is used to make a character print one way in ttfont % where it can probably just be output, and another way in other fonts, @@ -4570,7 +5851,13 @@ width0pt\relax} \fi % interword stretch (and shrink), and it is reasonable to expect all % typewriter fonts to have this, we can check that font parameter. % -\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi} +\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi} + +% Same as above, but check for italic font. Actually this also catches +% non-italic slanted fonts since it is impossible to distinguish them from +% italic fonts. But since this is only used by $ and it uses \sl anyway +% this is not a problem. +\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi} % Turn off all special characters except @ % (and those which the user can use as if they were ordinary). @@ -4578,13 +5865,12 @@ width0pt\relax} \fi % use math or other variants that look better in normal text. \catcode`\"=\active -\def\activedoublequote{{\tt \char '042}} +\def\activedoublequote{{\tt\char34}} \let"=\activedoublequote \catcode`\~=\active -\def~{{\tt \char '176}} +\def~{{\tt\char126}} \chardef\hat=`\^ \catcode`\^=\active -\def\auxhat{\def^{'hat}} \def^{{\tt \hat}} \catcode`\_=\active @@ -4593,7 +5879,7 @@ width0pt\relax} \fi \def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}} \catcode`\|=\active -\def|{{\tt \char '174}} +\def|{{\tt\char124}} \chardef \less=`\< \catcode`\<=\active \def<{{\tt \less}} @@ -4602,6 +5888,8 @@ width0pt\relax} \fi \def>{{\tt \gtr}} \catcode`\+=\active \def+{{\tt \char 43}} +\catcode`\$=\active +\def${\ifusingit{{\sl\$}}\normaldollar} %\catcode 27=\active %\def^^[{$\diamondsuit$} @@ -4632,9 +5920,6 @@ width0pt\relax} \fi % \normalbackslash outputs one backslash in fixed width font. \def\normalbackslash{{\tt\rawbackslashxx}} -% Say @foo, not \foo, in error messages. -\escapechar=`\@ - % \catcode 17=0 % Define control-q \catcode`\\=\active @@ -4648,7 +5933,8 @@ width0pt\relax} \fi @let|=@normalverticalbar @let<=@normalless @let>=@normalgreater -@let+=@normalplus} +@let+=@normalplus +@let$=@normaldollar} @def@normalturnoffactive{@let"=@normaldoublequote @let\=@normalbackslash @@ -4658,7 +5944,8 @@ width0pt\relax} \fi @let|=@normalverticalbar @let<=@normalless @let>=@normalgreater -@let+=@normalplus} +@let+=@normalplus +@let$=@normaldollar} % Make _ and + \other characters, temporarily. % This is canceled by @fixbackslash. @@ -4677,16 +5964,29 @@ width0pt\relax} \fi % Also back turn on active characters that might appear in the input % file name, in case not using a pre-dumped format. % -@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi - @catcode`+=@active @catcode`@_=@active} +@gdef@fixbackslash{% + @ifx\@eatinput @let\ = @normalbackslash @fi + @catcode`+=@active + @catcode`@_=@active +} + +% Say @foo, not \foo, in error messages. +@escapechar = `@@ -%% These look ok in all fonts, so just make them not special. The @rm below -%% makes sure that the current font starts out as the newly loaded cmr10 -@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other +% These look ok in all fonts, so just make them not special. +@catcode`@& = @other +@catcode`@# = @other +@catcode`@% = @other +@c Set initial fonts. @textfonts @rm + @c Local variables: +@c eval: (add-hook 'write-file-hooks 'time-stamp) @c page-delimiter: "^\\\\message" +@c time-stamp-start: "def\\\\texinfoversion{" +@c time-stamp-format: "%:y-%02m-%02d.%02H" +@c time-stamp-end: "}" @c End: |