diff options
Diffstat (limited to 'CWRU/old/set.def.save')
-rw-r--r-- | CWRU/old/set.def.save | 544 |
1 files changed, 0 insertions, 544 deletions
diff --git a/CWRU/old/set.def.save b/CWRU/old/set.def.save deleted file mode 100644 index 87b78d7c..00000000 --- a/CWRU/old/set.def.save +++ /dev/null @@ -1,544 +0,0 @@ -This file is set.def, from which is created set.c. -It implements the "set" and "unset" builtins in Bash. - -Copyright (C) 1987, 1989, 1991 Free Software Foundation, Inc. - -This file is part of GNU Bash, the Bourne Again SHell. - -Bash is free software; you can redistribute it and/or modify it under -the terms of the GNU General Public License as published by the Free -Software Foundation; either version 1, or (at your option) any later -version. - -Bash is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY; without even the implied warranty of MERCHANTABILITY or -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -for more details. - -You should have received a copy of the GNU General Public License along -with Bash; see the file COPYING. If not, write to the Free Software -Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - -$PRODUCES set.c - -#include <stdio.h> -#include "../shell.h" -#include "../flags.h" - -#include "bashgetopt.h" - -extern int interactive; -extern int noclobber, posixly_correct; -#if defined (READLINE) -extern int rl_editing_mode, no_line_editing; -#endif /* READLINE */ - -$BUILTIN set -$FUNCTION set_builtin -$SHORT_DOC set [--abefhkmnptuvxldBCHP] [-o option] [arg ...] - -a Mark variables which are modified or created for export. - -b Notify of job termination immediately. - -e Exit immediately if a command exits with a non-zero status. - -f Disable file name generation (globbing). - -h Locate and remember function commands as functions are - defined. Function commands are normally looked up when - the function is executed. - -i Force the shell to be an "interactive" one. Interactive shells - always read `~/.bashrc' on startup. - -k All keyword arguments are placed in the environment for a - command, not just those that precede the command name. - -m Job control is enabled. - -n Read commands but do not execute them. - -o option-name - Set the variable corresponding to option-name: - allexport same as -a - braceexpand same as -B -#if defined (READLINE) - emacs use an emacs-style line editing interface -#endif /* READLINE */ - errexit same as -e - histexpand same as -H - ignoreeof the shell will not exit upon reading EOF - interactive-comments - allow comments to appear in interactive commands - monitor same as -m - noclobber disallow redirection to existing files - noexec same as -n - noglob same as -f - nohash same as -d - notify save as -b - nounset same as -u - physical same as -P - posix change the behavior of bash where the default - operation differs from the 1003.2 standard to - match the standard - privileged same as -p - verbose same as -v -#if defined (READLINE) - vi use a vi-style line editing interface -#endif /* READLINE */ - xtrace same as -x - -p Turned on whenever the real and effective user ids do not match. - Disables processing of the $ENV file and importing of shell - functions. Turning this option off causes the effective uid and - gid to be set to the real uid and gid. - -t Exit after reading and executing one command. - -u Treat unset variables as an error when substituting. - -v Print shell input lines as they are read. - -x Print commands and their arguments as they are executed. - -l Save and restore the binding of the NAME in a FOR command. - -d Disable the hashing of commands that are looked up for execution. - Normally, commands are remembered in a hash table, and once - found, do not have to be looked up again. -#if defined (BRACE_EXPANSION) - -B the shell will perform brace expansion -#endif /* BRACE_EXPANSION */ -#if defined (BANG_HISTORY) - -H Enable ! style history substitution. This flag is on - by default. -#endif /* BANG_HISTORY */ - -C If set, disallow existing regular files to be overwritten - by redirection of output. - -P If set, do not follow symbolic links when executing commands - such as cd which change the current directory. - -Using + rather than - causes these flags to be turned off. The -flags can also be used upon invocation of the shell. The current -set of flags may be found in $-. The remaining n ARGs are positional -parameters and are assigned, in order, to $1, $2, .. $n. If no -ARGs are given, all shell variables are printed. -$END - -/* An a-list used to match long options for set -o to the corresponding - option letter. */ -struct { - char *name; - int letter; -} o_options[] = { - { "allexport", 'a' }, -#if defined (BRACE_EXPANSION) - { "braceexpand",'B' }, -#endif - { "errexit", 'e' }, - { "histexpand", 'H' }, - { "monitor", 'm' }, - { "noexec", 'n' }, - { "noglob", 'f' }, - { "nohash", 'd' }, -#if defined (JOB_CONTROL) - { "notify", 'b' }, -#endif /* JOB_CONTROL */ - {"nounset", 'u' }, - {"physical", 'P' }, - {"privileged", 'p' }, - {"verbose", 'v' }, - {"xtrace", 'x' }, - {(char *)NULL, 0}, -}; - -#define MINUS_O_FORMAT "%-15s\t%s\n" - -void -list_minus_o_opts () -{ - register int i; - char *on = "on", *off = "off"; - - printf (MINUS_O_FORMAT, "noclobber", (noclobber == 1) ? on : off); - - if (find_variable ("ignoreeof") || find_variable ("IGNOREEOF")) - printf (MINUS_O_FORMAT, "ignoreeof", on); - else - printf (MINUS_O_FORMAT, "ignoreeof", off); - - printf (MINUS_O_FORMAT, "interactive-comments", - interactive_comments ? on : off); - - printf (MINUS_O_FORMAT, "posix", posixly_correct ? on : off); - -#if defined (READLINE) - if (no_line_editing) - { - printf (MINUS_O_FORMAT, "emacs", off); - printf (MINUS_O_FORMAT, "vi", off); - } - else - { - /* Magic. This code `knows' how readline handles rl_editing_mode. */ - printf (MINUS_O_FORMAT, "emacs", (rl_editing_mode == 1) ? on : off); - printf (MINUS_O_FORMAT, "vi", (rl_editing_mode == 0) ? on : off); - } -#endif /* READLINE */ - - for (i = 0; o_options[i].name; i++) - { - int *on_or_off, zero = 0; - - on_or_off = find_flag (o_options[i].letter); - if (on_or_off == FLAG_UNKNOWN) - on_or_off = &zero; - printf (MINUS_O_FORMAT, o_options[i].name, (*on_or_off == 1) ? on : off); - } -} - -set_minus_o_option (on_or_off, option_name) - int on_or_off; - char *option_name; -{ - int option_char = -1; - - if (STREQ (option_name, "noclobber")) - { - if (on_or_off == FLAG_ON) - bind_variable ("noclobber", ""); - else - unbind_variable ("noclobber"); - stupidly_hack_special_variables ("noclobber"); - } - else if (STREQ (option_name, "ignoreeof")) - { - unbind_variable ("ignoreeof"); - unbind_variable ("IGNOREEOF"); - if (on_or_off == FLAG_ON) - bind_variable ("IGNOREEOF", "10"); - stupidly_hack_special_variables ("IGNOREEOF"); - } - -#if defined (READLINE) - else if ((STREQ (option_name, "emacs")) || (STREQ (option_name, "vi"))) - { - if (on_or_off == FLAG_ON) - { - rl_variable_bind ("editing-mode", option_name); - - if (interactive) - with_input_from_stdin (); - no_line_editing = 0; - } - else - { - int isemacs = (rl_editing_mode == 1); - if ((isemacs && STREQ (option_name, "emacs")) || - (!isemacs && STREQ (option_name, "vi"))) - { - if (interactive) - with_input_from_stream (stdin, "stdin"); - no_line_editing = 1; - } - else - builtin_error ("not in %s editing mode", option_name); - } - } -#endif /* READLINE */ - else if (STREQ (option_name, "interactive-comments")) - interactive_comments = (on_or_off == FLAG_ON); - else if (STREQ (option_name, "posix")) - { - posixly_correct = (on_or_off == FLAG_ON); - unbind_variable ("POSIXLY_CORRECT"); - unbind_variable ("POSIX_PEDANTIC"); - if (on_or_off == FLAG_ON) - { - bind_variable ("POSIXLY_CORRECT", ""); - stupidly_hack_special_variables ("POSIXLY_CORRECT"); - } - } - else - { - register int i; - for (i = 0; o_options[i].name; i++) - { - if (STREQ (option_name, o_options[i].name)) - { - option_char = o_options[i].letter; - break; - } - } - if (option_char == -1) - { - builtin_error ("%s: unknown option name", option_name); - return (EXECUTION_FAILURE); - } - if (change_flag (option_char, on_or_off) == FLAG_ERROR) - { - bad_option (option_name); - return (EXECUTION_FAILURE); - } - } - return (EXECUTION_SUCCESS); -} - -/* Set some flags from the word values in the input list. If LIST is empty, - then print out the values of the variables instead. If LIST contains - non-flags, then set $1 - $9 to the successive words of LIST. */ -set_builtin (list) - WORD_LIST *list; -{ - int on_or_off, flag_name, force_assignment = 0; - - if (!list) - { - SHELL_VAR **vars; - - vars = all_shell_variables (); - if (vars) - { - print_var_list (vars); - free (vars); - } - - vars = all_shell_functions (); - if (vars) - { - print_var_list (vars); - free (vars); - } - - return (EXECUTION_SUCCESS); - } - - /* Check validity of flag arguments. */ - if (*list->word->word == '-' || *list->word->word == '+') - { - register char *arg; - WORD_LIST *save_list = list; - - while (list && (arg = list->word->word)) - { - char c; - - if (arg[0] != '-' && arg[0] != '+') - break; - - /* `-' or `--' signifies end of flag arguments. */ - if (arg[0] == '-' && - (!arg[1] || (arg[1] == '-' && !arg[2]))) - break; - - while (c = *++arg) - { - if (find_flag (c) == FLAG_UNKNOWN && c != 'o') - { - char s[2]; - s[0] = c; s[1] = '\0'; - bad_option (s); - if (c == '?') - builtin_usage (); - return (c == '?' ? EXECUTION_SUCCESS : EXECUTION_FAILURE); - } - } - list = list->next; - } - list = save_list; - } - - /* Do the set command. While the list consists of words starting with - '-' or '+' treat them as flags, otherwise, start assigning them to - $1 ... $n. */ - while (list) - { - char *string = list->word->word; - - /* If the argument is `--' or `-' then signal the end of the list - and remember the remaining arguments. */ - if (string[0] == '-' && (!string[1] || (string[1] == '-' && !string[2]))) - { - list = list->next; - - /* `set --' unsets the positional parameters. */ - if (string[1] == '-') - force_assignment = 1; - - /* Until told differently, the old shell behaviour of - `set - [arg ...]' being equivalent to `set +xv [arg ...]' - stands. Posix.2 says the behaviour is marked as obsolescent. */ - else - { - change_flag ('x', '+'); - change_flag ('v', '+'); - } - - break; - } - - if ((on_or_off = *string) && - (on_or_off == '-' || on_or_off == '+')) - { - int i = 1; - while (flag_name = string[i++]) - { - if (flag_name == '?') - { - builtin_usage (); - return (EXECUTION_SUCCESS); - } - else if (flag_name == 'o') /* -+o option-name */ - { - char *option_name; - WORD_LIST *opt; - - opt = list->next; - - if (!opt) - { - list_minus_o_opts (); - continue; - } - - option_name = opt->word->word; - - if (!option_name || !*option_name || (*option_name == '-')) - { - list_minus_o_opts (); - continue; - } - list = list->next; /* Skip over option name. */ - - if (set_minus_o_option (on_or_off, option_name) != EXECUTION_SUCCESS) - return (EXECUTION_FAILURE); - } - else - { - if (change_flag (flag_name, on_or_off) == FLAG_ERROR) - { - char opt[3]; - opt[0] = on_or_off; - opt[1] = flag_name; - opt[2] = '\0'; - bad_option (opt); - builtin_usage (); - return (EXECUTION_FAILURE); - } - } - } - } - else - { - break; - } - list = list->next; - } - - /* Assigning $1 ... $n */ - if (list || force_assignment) - remember_args (list, 1); - return (EXECUTION_SUCCESS); -} - -$BUILTIN unset -$FUNCTION unset_builtin -$SHORT_DOC unset [-f] [-v] [name ...] -For each NAME, remove the corresponding variable or function. Given -the `-v', unset will only act on variables. Given the `-f' flag, -unset will only act on functions. With neither flag, unset first -tries to unset a variable, and if that fails, then tries to unset a -function. Some variables (such as PATH and IFS) cannot be unset; also -see readonly. -$END - -#define NEXT_VARIABLE() any_failed++; list = list->next; continue; - -unset_builtin (list) - WORD_LIST *list; -{ - int unset_function, unset_variable, unset_array, opt, any_failed; - char *name; - - unset_function = unset_variable = unset_array = any_failed = 0; - - reset_internal_getopt (); - while ((opt = internal_getopt (list, "fv")) != -1) - { - switch (opt) - { - case 'f': - unset_function = 1; - break; - case 'v': - unset_variable = 1; - break; - default: - builtin_usage (); - return (EXECUTION_FAILURE); - } - } - - list = loptend; - - if (unset_function && unset_variable) - { - builtin_error ("cannot simultaneously unset a function and a variable"); - return (EXECUTION_FAILURE); - } - - while (list) - { - SHELL_VAR *var; - int tem; -#if defined (ARRAY_VARS) - char *t; -#endif - - name = list->word->word; - -#if defined (ARRAY_VARS) - if (!unset_function && valid_array_reference (name)) - { - t = strchr (name, '['); - *t++ = '\0'; - unset_array++; - } -#endif - - var = unset_function ? find_function (name) : find_variable (name); - - if (var && !unset_function && non_unsettable_p (var)) - { - builtin_error ("%s: cannot unset", name); - NEXT_VARIABLE (); - } - - /* Posix.2 says that unsetting readonly variables is an error. */ - if (var && readonly_p (var)) - { - builtin_error ("%s: cannot unset: readonly %s", - name, unset_function ? "function" : "variable"); - NEXT_VARIABLE (); - } - - /* Unless the -f option is supplied, the name refers to a variable. */ -#if defined (ARRAY_VARS) - if (var && unset_array) - { - if (array_p (var) == 0) - { - builtin_error ("%s: not an array variable", name); - NEXT_VARIABLE (); - } - else - tem = unbind_array_element (var, t); - } - else -#endif /* ARRAY_VARS */ - tem = makunbound (name, unset_function ? shell_functions : shell_variables); - - /* This is what Posix.2 draft 11+ says. ``If neither -f nor -v - is specified, the name refers to a variable; if a variable by - that name does not exist, a function by that name, if any, - shall be unset.'' */ - if ((tem == -1) && !unset_function && !unset_variable) - tem = makunbound (name, shell_functions); - - if (tem == -1) - any_failed++; - else if (!unset_function) - stupidly_hack_special_variables (name); - - list = list->next; - } - - if (any_failed) - return (EXECUTION_FAILURE); - else - return (EXECUTION_SUCCESS); -} |