total rework

no more QT

10 files changed, 4298 insertions, 0 deletions

diff --git a/includes/Doxyfile.in b/includes/Doxyfile.in
new file mode 100644
index 0000000..3d27fb4
--- /dev/null
+++ b/includes/Doxyfile.in
@@ -0,0 +1,1661 @@
+# Doxyfile 1.7.1
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the config file 
+# that follow. The default is UTF-8 which is also the encoding used for all 
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the 
+# iconv built into libc) for the transcoding. See 
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = AudioManagerInterfaces
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
+# This could be handy for archiving the generated documentation or 
+# if some version control system is used.
+
+PROJECT_NUMBER         = 0.1
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
+# base path where the generated documentation will be put. 
+# If a relative path is entered, it will be relative to the location 
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = doc
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
+# 4096 sub-directories (in 2 levels) under the output directory of each output 
+# format and will distribute the generated files over these directories. 
+# Enabling this option can be useful when feeding doxygen a huge amount of 
+# source files, where putting all generated files in the same directory would 
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
+# documentation generated by doxygen is written. Doxygen will use this 
+# information to generate all constant output in the proper language. 
+# The default language is English, other supported languages are: 
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, 
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English 
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, 
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, 
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
+
+OUTPUT_LANGUAGE        = English
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
+# include brief member descriptions after the members that are listed in 
+# the file and class documentation (similar to JavaDoc). 
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
+# the brief description of a member or function before the detailed description. 
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator 
+# that is used to form the text in various listings. Each string 
+# in this list, if found as the leading text of the brief description, will be 
+# stripped from the text and the result after processing the whole list, is 
+# used as the annotated text. Otherwise, the brief description is used as-is. 
+# If left blank, the following values are used ("$name" is automatically 
+# replaced with the name of the entity): "The $name class" "The $name widget" 
+# "The $name file" "is" "provides" "specifies" "contains" 
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
+# Doxygen will generate a detailed section even if there is only a brief 
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
+# inherited members of a class in the documentation of that class as if those 
+# members were ordinary class members. Constructors, destructors and assignment 
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
+# path before files name in the file list and in the header files. If set 
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
+# can be used to strip a user-defined part of the path. Stripping is 
+# only done if one of the specified strings matches the left-hand part of 
+# the path. The tag can be used to show relative paths in the file list. 
+# If left blank the directory from which doxygen is run is used as the 
+# path to strip.
+
+STRIP_FROM_PATH        = 
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
+# the path mentioned in the documentation of a class, which tells 
+# the reader which header file to include in order to use a class. 
+# If left blank only the name of the header file containing the class 
+# definition is used. Otherwise one should specify the include paths that 
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    = 
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
+# (but less readable) file names. This can be useful is your file systems 
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
+# will interpret the first line (until the first dot) of a JavaDoc-style 
+# comment as the brief description. If set to NO, the JavaDoc 
+# comments will behave just like regular Qt-style comments 
+# (thus requiring an explicit @brief command for a brief description.)
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
+# interpret the first line (until the first dot) of a Qt-style 
+# comment as the brief description. If set to NO, the comments 
+# will behave just like regular Qt-style comments (thus requiring 
+# an explicit \brief command for a brief description.)
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
+# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
+# comments) as a brief description. This used to be the default behaviour. 
+# The new default is to treat a multi-line C++ comment block as a detailed 
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
+# member inherits the documentation from any documented member that it 
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
+# a new page for each member. If set to NO, the documentation of a member will 
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 8
+
+# This tag can be used to specify a number of aliases that acts 
+# as commands in the documentation. An alias has the form "name=value". 
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
+# put the command \sideeffect (or @sideeffect) in the documentation, which 
+# will result in a user-defined paragraph with heading "Side Effects:". 
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                = 
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
+# sources only. Doxygen will then generate output that is more tailored for C. 
+# For instance, some of the names that are used will be different. The list 
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = NO
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 
+# sources only. Doxygen will then generate output that is more tailored for 
+# Java. For instance, namespaces will be presented as packages, qualified 
+# scopes will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 
+# sources only. Doxygen will then generate output that is more tailored for 
+# Fortran.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 
+# sources. Doxygen will then generate output that is tailored for 
+# VHDL.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it 
+# parses. With this tag you can assign which parser to use for a given extension. 
+# Doxygen has a built-in mapping, but you can override or extend it using this 
+# tag. The format is ext=language, where ext is a file extension, and language 
+# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, 
+# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make 
+# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C 
+# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions 
+# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+
+EXTENSION_MAPPING      = 
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 
+# to include (a tag file for) the STL sources as input, then you should 
+# set this tag to YES in order to let doxygen match functions declarations and 
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 
+# func(std::string) {}). This also make the inheritance and collaboration 
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to 
+# enable parsing support.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 
+# Doxygen will parse them like normal C++ but will assume all classes use public 
+# instead of private inheritance when no explicit protection keyword is present.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate getter 
+# and setter methods for a property. Setting this option to YES (the default) 
+# will make doxygen to replace the get and set methods by a property in the 
+# documentation. This will only work if the methods are indeed getting or 
+# setting a simple type. If this is not the case, or you want to show the 
+# methods anyway, you should set this option to NO.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
+# tag is set to YES, then doxygen will reuse the documentation of the first 
+# member in the group (if any) for the other members of the group. By default 
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
+# the same type (for instance a group of public functions) to be put as a 
+# subgroup of that type (e.g. under the Public Functions section). Set it to 
+# NO to prevent subgrouping. Alternatively, this can be done per class using 
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 
+# is documented as struct, union, or enum with the name of the typedef. So 
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct 
+# with name TypeT. When disabled the typedef will appear as a member of a file, 
+# namespace, or class. And the struct will be named TypeS. This can typically 
+# be useful for C code in case the coding convention dictates that all compound 
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+
+TYPEDEF_HIDES_STRUCT   = YES
+
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to 
+# determine which symbols to keep in memory and which to flush to disk. 
+# When the cache is full, less often used symbols will be written to disk. 
+# For small to medium size projects (<1000 input files) the default value is 
+# probably good enough. For larger projects a too small cache size can cause 
+# doxygen to be busy swapping symbols to and from disk most of the time 
+# causing a significant performance penality. 
+# If the system has enough physical memory increasing the cache will improve the 
+# performance by keeping more symbols in memory. Note that the value works on 
+# a logarithmic scale so increasing the size by one will rougly double the 
+# memory usage. The cache size is given by this formula: 
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, 
+# corresponding to a cache size of 2^16 = 65536 symbols
+
+SYMBOL_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
+# documentation are documented, even if no documentation was available. 
+# Private class members and static file members will be hidden unless 
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = YES
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file 
+# will be included in the documentation.
+
+EXTRACT_STATIC         = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
+# defined locally in source files will be included in the documentation. 
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local 
+# methods, which are defined in the implementation section but not in 
+# the interface are included in the documentation. 
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = YES
+
+# If this flag is set to YES, the members of anonymous namespaces will be 
+# extracted and appear in the documentation as a namespace called 
+# 'anonymous_namespace{file}', where file will be replaced with the base 
+# name of the file that contains the anonymous namespace. By default 
+# anonymous namespace are hidden.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
+# undocumented members of documented classes, files or namespaces. 
+# If set to NO (the default) these members will be included in the 
+# various overviews, but no documentation section is generated. 
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
+# undocumented classes that are normally visible in the class hierarchy. 
+# If set to NO (the default) these classes will be included in the various 
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
+# friend (class|struct|union) declarations. 
+# If set to NO (the default) these declarations will be included in the 
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
+# documentation blocks found inside the body of a function. 
+# If set to NO (the default) these blocks will be appended to the 
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation 
+# that is typed after a \internal command is included. If the tag is set 
+# to NO (the default) then the documentation will be excluded. 
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
+# file names in lower-case letters. If set to YES upper-case letters are also 
+# allowed. This is useful if you have classes or files whose names only differ 
+# in case and if your file system supports case sensitive file names. Windows 
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = NO
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
+# will show members with their full class and namespace scopes in the 
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
+# will put a list of the files that are included by a file in the documentation 
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen 
+# will list include files with double quotes in the documentation 
+# rather than with sharp brackets.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
+# will sort the (detailed) documentation of file and class members 
+# alphabetically by member name. If set to NO the members will appear in 
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
+# brief documentation of file, namespace and class members alphabetically 
+# by member name. If set to NO (the default) the members will appear in 
+# declaration order.
+
+SORT_BRIEF_DOCS        = YES
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen 
+# will sort the (brief and detailed) documentation of class members so that 
+# constructors and destructors are listed first. If set to NO (the default) 
+# the constructors will appear in the respective orders defined by 
+# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. 
+# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO 
+# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 
+# hierarchy of group names into alphabetical order. If set to NO (the default) 
+# the group names will appear in their defined order.
+
+SORT_GROUP_NAMES       = YES
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
+# sorted by fully-qualified names, including namespaces. If set to 
+# NO (the default), the class list will be sorted only by class name, 
+# not including the namespace part. 
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. 
+# Note: This option applies only to the class list, not to the 
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or 
+# disable (NO) the todo list. This list is created by putting \todo 
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or 
+# disable (NO) the test list. This list is created by putting \test 
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or 
+# disable (NO) the bug list. This list is created by putting \bug 
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
+# disable (NO) the deprecated list. This list is created by putting 
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional 
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
+# the initial value of a variable or define consists of for it to appear in 
+# the documentation. If the initializer consists of more lines than specified 
+# here it will be hidden. Use a value of 0 to hide initializers completely. 
+# The appearance of the initializer of individual variables and defines in the 
+# documentation can be controlled using \showinitializer or \hideinitializer 
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
+# at the bottom of the documentation of classes and structs. If set to YES the 
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = YES
+
+# If the sources in your project are distributed over multiple directories 
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. 
+# This will remove the Files entry from the Quick Index and from the 
+# Folder Tree View (if specified). The default is YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the 
+# Namespaces page.  This will remove the Namespaces entry from the Quick Index 
+# and from the Folder Tree View (if specified). The default is YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that 
+# doxygen should invoke to get the current version for each file (typically from 
+# the version control system). Doxygen will invoke the program by executing (via 
+# popen()) the command <command> <input-file>, where <command> is the value of 
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
+# provided by doxygen. Whatever the program writes to standard output 
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    = 
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed 
+# by doxygen. The layout file controls the global structure of the generated 
+# output files in an output format independent way. The create the layout file 
+# that represents doxygen's defaults, run doxygen with the -l option. 
+# You can optionally specify a file name after the option, if omitted 
+# DoxygenLayout.xml will be used as the name of the layout file.
+
+LAYOUT_FILE            = 
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated 
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are 
+# generated by doxygen. Possible values are YES and NO. If left blank 
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
+# potential errors in the documentation, such as not documenting some 
+# parameters in a documented function, or documenting parameters that 
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for 
+# functions that are documented, but have no documentation for their parameters 
+# or return value. If set to NO (the default) doxygen will only warn about 
+# wrong or incomplete parameter documentation, but not about the absence of 
+# documentation.
+
+WARN_NO_PARAMDOC       = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that 
+# doxygen can produce. The string should contain the $file, $line, and $text 
+# tags, which will be replaced by the file and line number from which the 
+# warning originated and the warning text. Optionally the format may contain 
+# $version, which will be replaced by the version of the file (if it could 
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning 
+# and error messages should be written. If left blank the output is written 
+# to stderr.
+
+WARN_LOGFILE           = 
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain 
+# documented source files. You may enter file names like "myfile.cpp" or 
+# directories like "/usr/src/myproject". Separate the files or directories 
+# with spaces.
+
+INPUT                  = "." 
+
+# This tag can be used to specify the character encoding of the source files 
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
+# also the default input encoding. Doxygen uses libiconv (or the iconv built 
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
+# the list of possible encodings.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the 
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
+# and *.h) to filter out the source-files in the directories. If left 
+# blank the following patterns are tested: 
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+
+FILE_PATTERNS          = *.c \
+                         *.cc \
+                         *.cxx \
+                         *.cpp \
+                         *.c++ \
+                         *.d \
+                         *.java \
+                         *.ii \
+                         *.ixx \
+                         *.ipp \
+                         *.i++ \
+                         *.inl \
+                         *.h \
+                         *.hh \
+                         *.hxx \
+                         *.hpp \
+                         *.h++ \
+                         *.idl \
+                         *.odl \
+                         *.cs \
+                         *.php \
+                         *.php3 \
+                         *.inc \
+                         *.m \
+                         *.mm \
+                         *.dox \
+                         *.py \
+                         *.f90 \
+                         *.f \
+                         *.vhd \
+                         *.vhdl
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
+# should be searched for input files as well. Possible values are YES and NO. 
+# If left blank NO is used.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should 
+# excluded from the INPUT source files. This way you can easily exclude a 
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                = 
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
+# directories that are symbolic links (a Unix filesystem feature) are excluded 
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the 
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
+# certain files from those directories. Note that the wildcards are matched 
+# against the file with absolute path, so to exclude all test directories 
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       = 
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 
+# (namespaces, classes, functions, etc.) that should be excluded from the 
+# output. The symbol name can be a fully qualified name, a word, or if the 
+# wildcard * is used, a substring. Examples: ANamespace, AClass, 
+# AClass::ANamespace, ANamespace::*Test
+
+EXCLUDE_SYMBOLS        = 
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or 
+# directories that contain example code fragments that are included (see 
+# the \include command).
+
+EXAMPLE_PATH           = 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
+# and *.h) to filter out the source-files in the directories. If left 
+# blank all files are included.
+
+EXAMPLE_PATTERNS       = *
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
+# searched for input files to be used with the \include or \dontinclude 
+# commands irrespective of the value of the RECURSIVE tag. 
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or 
+# directories that contain image that are included in the documentation (see 
+# the \image command).
+
+IMAGE_PATH             = ../../AudioManGUI
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should 
+# invoke to filter for each input file. Doxygen will invoke the filter program 
+# by executing (via popen()) the command <filter> <input-file>, where <filter> 
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
+# input file. Doxygen will then use the output that the filter program writes 
+# to standard output.  If FILTER_PATTERNS is specified, this tag will be 
+# ignored.
+
+INPUT_FILTER           = 
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
+# basis.  Doxygen will compare the file name with each pattern and apply the 
+# filter if there is a match.  The filters are a list of the form: 
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
+# is applied to all files.
+
+FILTER_PATTERNS        = 
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
+# INPUT_FILTER) will be used to filter the input files when producing source 
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will 
+# be generated. Documented entities will be cross-referenced with these sources. 
+# Note: To get rid of all source code in the generated output, make sure also 
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body 
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
+# doxygen to hide any special comment blocks from generated source code 
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES 
+# then for each documented function all documented 
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES 
+# then for each documented function all documented entities 
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) 
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from 
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will 
+# link to the source code.  Otherwise they will link to the documentation.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code 
+# will point to the HTML generated by the htags(1) tool instead of doxygen 
+# built-in source browser. The htags tool is part of GNU's global source 
+# tagging system (see http://www.gnu.org/software/global/global.html). You 
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
+# will generate a verbatim copy of the header file for each class for 
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
+# of all compounds will be generated. Enable this if the project 
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all 
+# classes will be put under the same header in the alphabetical index. 
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          = 
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for 
+# each generated HTML page. If it is left blank doxygen will generate a 
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
+# each generated HTML page. If it is left blank doxygen will generate a 
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
+# style sheet that is used by each HTML page. It can be used to 
+# fine-tune the look of the HTML output. If the tag is left blank doxygen 
+# will generate a default style sheet. Note that doxygen will try to copy 
+# the style sheet file to the HTML output directory, so don't put your own 
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. 
+# Doxygen will adjust the colors in the stylesheet and background images 
+# according to this color. Hue is specified as an angle on a colorwheel, 
+# see http://en.wikipedia.org/wiki/Hue for more information. 
+# For instance the value 0 represents red, 60 is yellow, 120 is green, 
+# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. 
+# The allowed range is 0 to 359.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of 
+# the colors in the HTML output. For a value of 0 the output will use 
+# grayscales only. A value of 255 will produce the most vivid colors.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to 
+# the luminance component of the colors in the HTML output. Values below 
+# 100 gradually make the output lighter, whereas values above 100 make 
+# the output darker. The value divided by 100 is the actual gamma applied, 
+# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, 
+# and 100 does not change the gamma.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML 
+# page will contain the date and time when the page was generated. Setting 
+# this to NO can help when comparing the output of multiple runs.
+
+HTML_TIMESTAMP         = YES
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
+# files or namespaces will be aligned in HTML using tables. If set to 
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 
+# documentation will contain sections that can be hidden and shown after the 
+# page has loaded. For this to work a browser that supports 
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+
+HTML_DYNAMIC_SECTIONS  = YES
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files 
+# will be generated that can be used as input for Apple's Xcode 3 
+# integrated development environment, introduced with OSX 10.5 (Leopard). 
+# To create a documentation set, doxygen will generate a Makefile in the 
+# HTML output directory. Running make will produce the docset in that 
+# directory and running "make install" will install the docset in 
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
+# it at startup. 
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html 
+# for more information.
+
+GENERATE_DOCSET        = NO
+
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 
+# feed. A documentation feed provides an umbrella under which multiple 
+# documentation sets from a single provider (such as a company or product suite) 
+# can be grouped.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 
+# should uniquely identify the documentation set bundle. This should be a 
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 
+# will append .docset to the name.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify 
+# the documentation publisher. This should be a reverse domain-name style 
+# string, e.g. com.mycompany.MyDocSet.documentation.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
+# will be generated that can be used as input for tools like the 
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
+# be used to specify the file name of the resulting .chm file. You 
+# can add a path in front of the file if the result should not be 
+# written to the html output directory.
+
+CHM_FILE               = 
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
+# be used to specify the location (absolute path including file name) of 
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           = 
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
+# controls if a separate .chi index file is generated (YES) or that 
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING 
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file 
+# content.
+
+CHM_INDEX_ENCODING     = 
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
+# controls whether a binary table of contents is generated (YES) or a 
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members 
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and 
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated 
+# that can be used as input for Qt's qhelpgenerator to generate a 
+# Qt Compressed Help (.qch) of the generated HTML documentation.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can 
+# be used to specify the file name of the resulting .qch file. 
+# The path specified is relative to the HTML output folder.
+
+QCH_FILE               = 
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating 
+# Qt Help Project output. For more information please see 
+# http://doc.trolltech.com/qthelpproject.html#namespace
+
+QHP_NAMESPACE          = org.doxygen.Project
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating 
+# Qt Help Project output. For more information please see 
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to 
+# add. For more information please see 
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
+
+QHP_CUST_FILTER_NAME   = 
+
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the 
+# custom filter to add. For more information please see 
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters"> 
+# Qt Help Project / Custom Filters</a>.
+
+QHP_CUST_FILTER_ATTRS  = 
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this 
+# project's 
+# filter section matches. 
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes"> 
+# Qt Help Project / Filter Attributes</a>.
+
+QHP_SECT_FILTER_ATTRS  = 
+
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can 
+# be used to specify the location of Qt's qhelpgenerator. 
+# If non-empty doxygen will try to run qhelpgenerator on the generated 
+# .qhp file.
+
+QHG_LOCATION           = 
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files  
+# will be generated, which together with the HTML files, form an Eclipse help 
+# plugin. To install this plugin and make it available under the help contents 
+# menu in Eclipse, the contents of the directory containing the HTML and XML 
+# files needs to be copied into the plugins directory of eclipse. The name of 
+# the directory within the plugins directory should be the same as 
+# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before 
+# the help appears.
+
+GENERATE_ECLIPSEHELP   = YES
+
+# A unique identifier for the eclipse help plugin. When installing the plugin 
+# the directory name containing the HTML and XML files should also have 
+# this name.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
+# top of each HTML page. The value NO (the default) enables the index and 
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20]) 
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index 
+# structure should be generated to display hierarchical information. 
+# If the tag value is set to YES, a side panel will be generated 
+# containing a tree-like index structure (just like the one that 
+# is generated for HTML Help). For this to work a browser that supports 
+# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). 
+# Windows users are probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = YES
+
+# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, 
+# and Class Hierarchy pages using a tree view instead of an ordered list.
+
+USE_INLINE_TREES       = YES
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
+# used to set the initial width (in pixels) of the frame in which the tree 
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open 
+# links to external symbols imported via tag files in a separate window.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of Latex formulas included 
+# as images in the HTML documentation. The default is 10. Note that 
+# when you change the font size after a successful doxygen run you need 
+# to manually remove any form_*.png images from the HTML output directory 
+# to force them to be regenerated.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANPARENT tag to determine whether or not the images 
+# generated for formulas are transparent PNGs. Transparent PNGs are 
+# not supported properly for IE 6.0, but are supported on all modern browsers. 
+# Note that when changing this option you need to delete any form_*.png files 
+# in the HTML output before the changes have effect.
+
+FORMULA_TRANSPARENT    = YES
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box 
+# for the HTML output. The underlying search engine uses javascript 
+# and DHTML and should work on any modern browser. Note that when using 
+# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets 
+# (GENERATE_DOCSET) there is already a search function so this one should 
+# typically be disabled. For large projects the javascript based search engine 
+# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be 
+# implemented using a PHP enabled web server instead of at the web client 
+# using Javascript. Doxygen will generate the search PHP script and index 
+# file to put on the web server. The advantage of the server 
+# based approach is that it scales better to large projects and allows 
+# full text search. The disadvances is that it is more difficult to setup 
+# and does not have live searching capabilities.
+
+SERVER_BASED_SEARCH    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
+# invoked. If left blank `latex' will be used as the default command name. 
+# Note that when enabling USE_PDFLATEX this option is only used for 
+# generating bitmaps for formulas in the HTML output, but not in the 
+# Makefile that is written to the output directory.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
+# generate index for LaTeX. If left blank `makeindex' will be used as the 
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
+# LaTeX documents. This may be useful for small projects and may help to 
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used 
+# by the printer. Possible values are: a4, a4wide, letter, legal and 
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         = 
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
+# the generated latex document. The header should contain everything until 
+# the first chapter. If it is left blank doxygen will generate a 
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           = 
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will 
+# contain links (just like the HTML output) instead of page references 
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
+# plain latex in the generated Makefile. Set this option to YES to get a 
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
+# command to the generated LaTeX files. This will instruct LaTeX to keep 
+# running if errors occur, instead of asking the user for help. 
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not 
+# include the index chapters (such as File Index, Compound Index, etc.) 
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include 
+# source code with syntax highlighting in the LaTeX output. 
+# Note that which sources are shown also depends on other settings 
+# such as SOURCE_BROWSER.
+
+LATEX_SOURCE_CODE      = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
+# The RTF output is optimized for Word 97 and may not look very pretty with 
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
+# RTF documents. This may be useful for small projects and may help to 
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
+# will contain hyperlink fields. The RTF file will 
+# contain links (just like the HTML output) instead of page references. 
+# This makes the output suitable for online browsing using WORD or other 
+# programs which support those fields. 
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's 
+# config file, i.e. a series of assignments. You only have to provide 
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    = 
+
+# Set optional variables used in the generation of an rtf document. 
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    = 
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to 
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
+# then it will generate one additional man file for each entity 
+# documented in the real man page(s). These additional files 
+# only source the real man page, but without them the man command 
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will 
+# generate an XML file that captures the structure of 
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema, 
+# which can be used by a validating XML parser to check the 
+# syntax of the XML files.
+
+XML_SCHEMA             = 
+
+# The XML_DTD tag can be used to specify an XML DTD, 
+# which can be used by a validating XML parser to check the 
+# syntax of the XML files.
+
+XML_DTD                = 
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
+# dump the program listings (including syntax highlighting 
+# and cross-referencing information) to the XML output. Note that 
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
+# generate an AutoGen Definitions (see autogen.sf.net) file 
+# that captures the structure of the code including all 
+# documentation. Note that this feature is still experimental 
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will 
+# generate a Perl module file that captures the structure of 
+# the code including all documentation. Note that this 
+# feature is still experimental and incomplete at the 
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able 
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
+# nicely formatted so it can be parsed by a human reader.  This is useful 
+# if you want to understand what is going on.  On the other hand, if this 
+# tag is set to NO the size of the Perl module output will be much smaller 
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file 
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
+# This is useful so different doxyrules.make files included by the same 
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX = 
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
+# evaluate all C-preprocessor directives found in the sources and include 
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
+# names in the source code. If set to NO (the default) only conditional 
+# compilation will be performed. Macro expansion can be done in a controlled 
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
+# then the macro expansion is limited to the macros specified with the 
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that 
+# contain include files that are not input files but should be processed by 
+# the preprocessor.
+
+INCLUDE_PATH           = 
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
+# patterns (like *.h and *.hpp) to filter out the header-files in the 
+# directories. If left blank, the patterns specified with FILE_PATTERNS will 
+# be used.
+
+INCLUDE_FILE_PATTERNS  = 
+
+# The PREDEFINED tag can be used to specify one or more macro names that 
+# are defined before the preprocessor is started (similar to the -D option of 
+# gcc). The argument of the tag is a list of macros of the form: name 
+# or name=definition (no spaces). If the definition and the = are 
+# omitted =1 is assumed. To prevent a macro definition from being 
+# undefined via #undef or recursively expanded use the := operator 
+# instead of the = operator.
+
+PREDEFINED             = 
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
+# this tag can be used to specify a list of macro names that should be expanded. 
+# The macro definition that is found in the sources will be used. 
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      = 
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
+# doxygen's preprocessor will remove all function-like macros that are alone 
+# on a line, have an all uppercase name, and do not end with a semicolon. Such 
+# function macros are typically used for boiler-plate code, and will confuse 
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles. 
+# Optionally an initial location of the external documentation 
+# can be added for each tagfile. The format of a tag file without 
+# this location is as follows: 
+#   TAGFILES = file1 file2 ... 
+# Adding location for the tag files is done as follows: 
+#   TAGFILES = file1=loc1 "file2 = loc2" ... 
+# where "loc1" and "loc2" can be relative or absolute paths or 
+# URLs. If a location is present for each tag, the installdox tool 
+# does not have to be run to correct the links. 
+# Note that each tag file must have a unique name 
+# (where the name does NOT include the path) 
+# If a tag file is not located in the directory in which doxygen 
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               = 
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create 
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       = 
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed 
+# in the class index. If set to NO only the inherited external classes 
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
+# in the modules index. If set to NO, only the current project's groups will 
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script 
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
+# or super classes. Setting the tag to NO turns the diagrams off. Note that 
+# this option is superseded by the HAVE_DOT option below. This is only a 
+# fallback. It is recommended to install and use dot, since it yields more 
+# powerful graphs.
+
+CLASS_DIAGRAMS         = NO
+
+# You can define message sequence charts within doxygen comments using the \msc 
+# command. Doxygen will then run the mscgen tool (see 
+# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the 
+# documentation. The MSCGEN_PATH tag allows you to specify the directory where 
+# the mscgen tool resides. If left empty the tool is assumed to be found in the 
+# default search path.
+
+MSCGEN_PATH            = 
+
+# If set to YES, the inheritance and collaboration graphs will hide 
+# inheritance and usage relations if the target is undocumented 
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
+# available from the path. This tool is part of Graphviz, a graph visualization 
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section 
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is 
+# allowed to run in parallel. When set to 0 (the default) doxygen will 
+# base this on the number of processors available in the system. You can set it 
+# explicitly to a value larger than 0 to get control over the balance 
+# between CPU load and processing speed.
+
+DOT_NUM_THREADS        = 0
+
+# By default doxygen will write a font called FreeSans.ttf to the output 
+# directory and reference it in all dot files that doxygen generates. This 
+# font does not include all possible unicode characters however, so when you need 
+# these (or just want a differently looking font) you can specify the font name 
+# using DOT_FONTNAME. You need need to make sure dot is able to find the font, 
+# which can be done by putting it in a standard location or by setting the 
+# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory 
+# containing the font.
+
+DOT_FONTNAME           = FreeSans.ttf
+
+# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. 
+# The default size is 10pt.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the output directory to look for the 
+# FreeSans.ttf font (which doxygen will put there itself). If you specify a 
+# different font using DOT_FONTNAME you can set the path where dot 
+# can find it using this tag.
+
+DOT_FONTPATH           = 
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
+# will generate a graph for each documented class showing the direct and 
+# indirect inheritance relations. Setting this tag to YES will force the 
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
+# will generate a graph for each documented class showing the direct and 
+# indirect implementation dependencies (inheritance, containment, and 
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
+# collaboration diagrams in a style similar to the OMG's Unified Modeling 
+# Language.
+
+UML_LOOK               = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the 
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
+# tags are set to YES then doxygen will generate a graph for each documented 
+# file showing the direct and indirect include dependencies of the file with 
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
+# documented header file showing the documented files that directly or 
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT options are set to YES then 
+# doxygen will generate a call dependency graph for every global function 
+# or class method. Note that enabling this option will significantly increase 
+# the time of a run. So in most cases it will be better to enable call graphs 
+# for selected functions only using the \callgraph command.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then 
+# doxygen will generate a caller dependency graph for every global function 
+# or class method. Note that enabling this option will significantly increase 
+# the time of a run. So in most cases it will be better to enable caller 
+# graphs for selected functions only using the \callergraph command.
+
+CALLER_GRAPH           = YES
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
+# then doxygen will show the dependencies a directory has on other directories 
+# in a graphical way. The dependency relations are determined by the #include 
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
+# generated by dot. Possible values are png, jpg, or gif 
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be 
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               = 
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that 
+# contain dot files that are included in the documentation (see the 
+# \dotfile command).
+
+DOTFILE_DIRS           = 
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 
+# nodes that will be shown in the graph. If the number of nodes in a graph 
+# becomes larger than this value, doxygen will truncate the graph, which is 
+# visualized by representing a node as a red box. Note that doxygen if the 
+# number of direct children of the root node in a graph is already larger than 
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note 
+# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+
+DOT_GRAPH_MAX_NODES    = 50
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
+# graphs generated by dot. A depth value of 3 means that only nodes reachable 
+# from the root by following a path via at most 3 edges will be shown. Nodes 
+# that lay further from the root node will be omitted. Note that setting this 
+# option to 1 or 2 may greatly reduce the computation time needed for large 
+# code bases. Also note that the size of a graph can be further restricted by 
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
+# background. This is disabled by default, because dot on Windows does not 
+# seem to support this out of the box. Warning: Depending on the platform used, 
+# enabling this option may lead to badly anti-aliased labels on the edges of 
+# a graph (i.e. they become hard to read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
+# files in one run (i.e. multiple -o and -T options on the command line). This 
+# makes dot run faster, but since only newer versions of dot (>1.8.10) 
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
+# generate a legend page explaining the meaning of the various boxes and 
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
+# remove the intermediate dot files that are used to generate 
+# the various graphs.
+
+DOT_CLEANUP            = YES
diff --git a/includes/audiomanagertypes.cpp b/includes/audiomanagertypes.cpp
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/includes/audiomanagertypes.cpp
diff --git a/includes/audiomanagertypes.h b/includes/audiomanagertypes.h
new file mode 100644
index 0000000..2328092
--- /dev/null
+++ b/includes/audiomanagertypes.h
@@ -0,0 +1,847 @@
+/**

+* Copyright (C) 2011, BMW AG

+*

+* GeniviAudioMananger

+*

+* \file  

+*

+* \date 20-Oct-2011 3:42:04 PM

+* \author Christian Mueller (christian.ei.mueller@bmw.de)

+*

+* \section License

+* GNU Lesser General Public License, version 2.1, with special exception (GENIVI clause)

+* Copyright (C) 2011, BMW AG Christian M?ller  Christian.ei.mueller@bmw.de

+*

+* This program is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License, version 2.1, as published by the Free Software Foundation.

+* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License, version 2.1, for more details.

+* You should have received a copy of the GNU Lesser General Public License, version 2.1, along with this program; if not, see <http://www.gnu.org/licenses/lgpl-2.1.html>.

+* Note that the copyright holders assume that the GNU Lesser General Public License, version 2.1, may also be applicable to programs even in cases in which the program is not a library in the technical sense.

+* Linking AudioManager statically or dynamically with other modules is making a combined work based on AudioManager. You may license such other modules under the GNU Lesser General Public License, version 2.1. If you do not want to license your linked modules under the GNU Lesser General Public License, version 2.1, you may use the program under the following exception.

+* As a special exception, the copyright holders of AudioManager give you permission to combine AudioManager with software programs or libraries that are released under any license unless such a combination is not permitted by the license of such a software program or library. You may copy and distribute such a system following the terms of the GNU Lesser General Public License, version 2.1, including this special exception, for AudioManager and the licenses of the other code concerned.

+* Note that people who make modified versions of AudioManager are not obligated to grant this special exception for their modified versions; it is their choice whether to do so. The GNU Lesser General Public License, version 2.1, gives permission to release a modified version without this exception; this exception also makes it possible to release a modified version which carries forward this exception.

+*

+* THIS CODE HAS BEEN GENERATED BY ENTERPRISE ARCHITECT GENIVI MODEL. PLEASE CHANGE ONLY IN ENTERPRISE ARCHITECT AND GENERATE AGAIN

+*/

+#if !defined(EA_230AE76E_21DF_4db5_8CCF_28FE84E8215D__INCLUDED_)

+#define EA_230AE76E_21DF_4db5_8CCF_28FE84E8215D__INCLUDED_

+

+#include <stdint.h>

+#include "projecttypes.h"

+#include <string>

+#include <vector>

+

+#define AM_MUTE -3000
+
+namespace am {
+	/**
+	 * This is the domain type. Each domain has a unique identifier.

+	 * 

+	 * \mainpage

+	 * \image html "Bild1.png"

+	 * Copyright Copyright (C) 2011, BMW AG

+	 * 

+	 * \date 22.06.2011

+	 * 

+	 * \author Christian Mueller (christian.ei.mueller@bmw.de)

+	 * 

+	 * \par About AudioManagerInterfaces

+	 * The AudioManager is a Deamon that manages all Audio Connections in a GENIVI headunit.

+	 * It is a managing instance that uses so called RoutingAdaptors to control AudioDomains that then do the "real" connections.

+	 * 

+	 * \par More information

+	 * can be found at https://collab.genivi.org/wiki/display/genivi/GENIVI+Home \n \n \n \n

+	 * 

+	 * \section architecture Architecture Overview

+	 * 

+	 * The architecture concept bases on the partition of management (logic) and routing (action). Sinks and sources are clustered into independent parts which are capable of exchanging audio with each other (AudioDomains). Between these AudioDomains, Audio can be interchanged via Gateways. \n

+	 * Since the routing and the management shall be independent from the actual used system, it is realized as an OwnedComponent, the AudioManager. Each AudioDomain has a Routing Adapter which implements some necessary logic and is the interface between the AudioManager and the AudioDomains.

+	 * 

+	 * \section domains Audio Domains

+	 * 

+	 * An Audio Domain consists of sinks and sources that can exchange audio with each other. To make the most out of the concept, AudioDomains shall be chosen in such a way that they are implemented by already existing audio routing engines.

+	 * 

+	 * The AudioManager assumes that there are no restrictions in interconnection of sinks and sources. One or more sources can be connected to one sink and one or more sinks can be connected to one source. Since real hardware or software might end up in having restrictions, the knowledge of this must exist in the AudioManager and handled by him accordingly. This shall be accomplished via a plug-in mechanism. An AudioDomain is not tied to a hardware or software implementation. It can be software or hardware or even a combination of both. \n

+	 * 

+	 * Examples for possible audio domains:\n

+	 * PulseAudio, Alsa, Jack, DSP, FPGA, MOST, In-chip switching matrix\n

+	 * 

+	 * The clustering and usage of the AudioDomains will vary from each product. Care must be taken while choosing the right AudioDomains in regards to system load (due to resampling), latency and of course flexibility.\n

+	 * In special implementations of the AudioDomain, it is capable of operation a certain time without interaction to the AudioManager. This is needed to fulfill the requirements for Early & Late Audio, more information can be found below.

+	 * 

+	 * \section routing_adaptor Routing Adapter

+	 * 

+	 * Via this adapter, the interconnection from the AudioManager to the AudioDomains is accomplished. An AudioDomain shall have exactly one RoutingAdapter. In the terms of GENIVI, a RoutingAdapter is an AbstractComponent, this means that we define an API and a certain behavior in UML models but do not maintain components itself. Existing implementations from Proof of Concepts are shipped as example Adapters "as is" but cannot be seen as maintained components.\n

+	 * The implementation of a routing adapter can and will vary from each project to another since the combination of sinks and sources, the used hardware etc has influence on the adapters. Besides interchanging and abstracting information between the AudioManager and the sinks and sources, the Adapters also need to implement some business logic in order to interact with the AudioManager. This includes for example the registering of components, managing the current state, error handling etc.\n

+	 * In the special case of an EarlyDomain, the routing adapter also has to manage start-up and rundown including persistence for his domain while the AudioManager is not started or already stopped. During this periods of time, these special adapters have to be able to fulfill basic tasks like changing volumes, for example (this implies that the Adapter is implemented on a different piece of hardware, e.g. vehicle processor).

+	 * 

+	 * \section Gateway

+	 * 

+	 * Gateways are used to let audio flow between two domains. They always have a direction and can only transport one stream at a time. Several gateways connecting the same domains together can exist in parallel so that more than one source can be connected to more than one sink from the same domains at the same time.\n

+	 * The representation of a Gateway in the domain which originates the audio is a sink. In the receiving domain, the gateway appears as a source. The AudioManager knows about the Gateways, in terms of connection, it handles it as simple sources and sinks.

+	 * 

+	 * \section AudioManagerDaemon

+	 * 

+	 * The AudioManager is the central managing instance of the Audio architecture. It is designed as an OwnedComponent, this means that the software is maintained within GENIVI as open source component. The AudioManager consists of 4 central components.\n

+	 * 

+	 * GOwnedComponent: AudioManager Daemon\n

+	 * 

+	 * This component is owned and maintained by Genivi. It is the central audio framework component. There can be only one daemon in a system (singleton).

+	 * 

+	 * \subsection controlinterface Control Interface Plugin

+	 * 

+	 * This describes the interface towards the Controlling Instances of the AudioManagerDaemon. This is the HMI and interrupt sources that use this interface to start their interrupt and stop it again. The interface shall be asynchronous. Via this interface all user interactions are handled.

+	 * 

+	 * \subsection routinginterface Routing Interface Plugin

+	 * 

+	 * This interface is used by the AudioManager to control the RoutingAdapters and communicate with them. The communication is based on two interfaces, one is provided by the AudioManager for communication from the adapters towards the AudioManager and one for the opposite direction. The design of the AudioManager shall be done in such a way that several Interfaces are supported at the same time via a plug-in mechanism. The plug-ins are (either statically - due to performance reasons or dynamically) loaded at start-up. Due to this architecture, the number of buses and routing adapters that are supported are as low as possible for each system and as high as needed without the need of changing the AudioManager itself. The AudioManager expects a bus-like structure behind each plug-in, so that a plug-in can implement a bus interface and proxy the messages to the routing adapters - the AudioManager will be capable of addressing more than one adapter one each plug-in. The interface shall is asynchronous for all timely critical commands.

+	 * 

+	 * \section sources_sinks Sources & Sinks

+	 * \subsection Visibility

+	 * Sources and sinks can either be visible or not. If they are visible, the HMI is informed about their existence and can use them. \n

+	 * Invisible Sources and Sinks either are system only relevant (e.g. an audio processing that has a source and a sink) or belong to a gateway.

+	 * 

+	 * \subsection Availability

+	 * It can be the case, that sources and sinks are present in the system but cannot be used at the moment. This is indicated via the availability. A sample use-case for this feature is CD drive that shall only be available if a CD is inserted.

+	 * 

+	 * \section Interrupts

+	 * \subsection llinterrupts Low level interrupts

+	 * \todo write low level Interrupts description

+	 * 

+	 * \subsection Interrupts

+	 * \todo write Interrupts description

+	 * 

+	 * \section Persistency

+	 * It is the job of the AudioManagerController to handle the persistency. It is planned to expose an interface via the ControlInterface to accomplish this but the GENIVI persistance is not ready yet. \n

+	 * 

+	 * 

+	 * \section speed Speed dependent volume

+	 * The adjustments for the speed are done product specific in the controller. The speed information itself is retrieved by the AudioManagerDaemon, sampled and quantified and forwarded to the controller.\n

+	 * Turning speed controlled volume on/off and possible settings are achieved via SinkSoundProperty settings.

+	 * 

+	 * \section Lipsync

+	 * It is the job of the AudioManager to retrieve all latency timing information from each connection, to aggregate this information and provide a latency information on a per MainConnection Basis. It is not the task of the AudioManager to actually delay or speed up video or audio signals to achieve a lipsync. The actual correction shall be done in the videoplayer with the information provided by the AudioManager.

+	 * The time information is always reported by the routingadaptors for each connection. Delays that are introduced in a sink or a gateway are counting for the connection that connects to this sink or gateway.\n

+	 * After the buildup of a connection the first timing information needs to be sent within 5 seconds, the timing information from the routing adaptors need to be sent via 4 seconds. If the latency for a connection is variable and changes over lifetime of the connection, the routing adaptors shall resend the value and the audiomanger will correct the over all latency.\n
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_domainID_t;
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_sourceID_t;
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_sinkID_t;
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_gatewayID_t;
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_crossfaderID_t;
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_connectionID_t;
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_mainConnectionID_t;
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_speed_t;
+
+	/**
+	 * The unit is 0.1 db steps,The smallest value -3000 (=AM_MUTE). The minimum and maximum can be limited by actual project.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef int16_t am_volume_t;
+
+	/**
+	 * This is the volume presented on the command interface. It is in the duty of the Controller to change the volumes given here into meaningful values on the routing interface.

+	 * The range of this type is customer specific.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef int16_t am_mainVolume_t;
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_sourceClass_t;
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_sinkClass_t;
+
+	/**
+	 * time in ms!
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef uint16_t am_time_t;
+
+	/**
+	 * offset time that is introduced in milli seconds.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	typedef int16_t am_timeSync_t;
+
+	/**
+	 * with the help of this enum, sinks and sources can report their availability state
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_Availablility_e
+	{
+		A_AVAILABLE = 0,
+		A_UNAVAILABLE,
+		A_UNKNOWN,
+		A_MAX,
+		A_MIN = A_AVAILABLE
+	};
+
+	/**
+	 * represents the connection state
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_ConnectionState_e
+	{
+		/**
+		 * This means the connection is just building up
+		 */
+		CS_CONNECTING = 0,
+		/**
+		 * the connection is ready to be used
+		 */
+		CS_CONNECTED,
+		/**
+		 * the connection is in the course to be knocked down
+		 */
+		CS_DISCONNECTING,
+		/**
+		 * only relevant for connectionStatechanged. Is send after the connection was removed
+		 */
+		CS_DISCONNECTED,
+		/**
+		 * this means the connection is still build up but unused at the moment
+		 */
+		CS_SUSPENDED,
+		CS_MAX,
+		CS_MIN = CS_CONNECTING
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_DomainState_e
+	{
+		DS_CONTROLLED = 0,
+		DS_INDEPENDENT_STARTUP,
+		DS_INDEPENDENT_RUNDOWN,
+		DS_MAX,
+		DS_MIN = DS_CONTROLLED
+	};
+
+	/**
+	 * This enum characterizes the data of the EarlyData_t
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_EarlyDataType_e
+	{
+		ED_SOURCE_VOLUME = 0,
+		ED_SINK_VOLUME,
+		ED_SOURCE_PROPERTY,
+		ED_SINK_PROPERTY,
+		ED_MAX,
+		ES_MIN = ED_SOURCE_VOLUME
+	};
+
+	/**
+	 * the errors of the audiomanager. All possible errors are in here. This enum is used widely as return parameter.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_Error_e
+	{
+		E_OK = 0,
+		E_UNKNOWN,
+		E_OUT_OF_RANGE,
+		E_NOT_USED,
+		E_DATABASE_ERROR,
+		E_ALREADY_EXISTS,
+		E_NO_CHANGE,
+		E_NOT_POSSIBLE,
+		E_NON_EXISTENT,
+		E_ABORTED,
+		/**
+		 * This error is returned in case a connect is issued with a connectionFormat that cannot be selected for the connection. This could be either due to the capabilities of a source or a sink or gateway compatibilities for example
+		 */
+		E_WRONG_FORMAT,
+		E_MAX,
+		E_MIN = E_OK
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_MuteState_e
+	{
+		MS_MUTED = 0,
+		MS_UNMUTED,
+		MS_MAX,
+		MS_MIN = MS_MUTED
+	};
+
+	/**
+	 * The source state reflects the state of the source
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_SourceState_e
+	{
+		/**
+		 * The source can be activly heared
+		 */
+		SS_ON = 0,
+		/**
+		 * The source cannot be heared
+		 */
+		SS_OFF,
+		/**
+		 * The source is paused. Meaning it cannot be heared but should be prepared to play again soon.
+		 */
+		SS_PAUSED,
+		SS_MAX,
+		SS_MIN = SS_ON
+	};
+
+	/**
+	 * This enumeration is used to define the type of the action that is correlated to a handle.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_Handle_e
+	{
+		H_CONNECT = 0,
+		H_DISCONNECT,
+		H_SETSOURCESTATE,
+		H_SETSINKVOLUME,
+		H_SETSOURCEVOLUME,
+		H_SETSINKSOUNDPROPERTY,
+		H_SETSOURCESOUNDPROPERTY,
+		H_CROSSFADE,
+		H_MAX,
+		H_MIN = H_CONNECT
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_InterruptState_e
+	{
+		IS_OFF = 0,
+		IS_INTERRUPTED,
+		IS_MAX,
+		IS_MIN = IS_OFF
+	};
+
+	/**
+	 * describes the active sink of a crossfader.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	enum am_HotSink_e
+	{
+		HS_SINKA = 0,
+		HS_SINKB,
+		HS_INTERMEDIATE,
+		HS_MAX,
+		HS_MIN = HS_SINKA
+	};
+
+	/**
+	 * this describes the availability of a sink or a source together with the latest change
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	struct am_Availability_s
+	{
+
+	public:
+		/**
+		 * the current availability state
+		 */
+		am_Availablility_e availability;
+		/**
+		 * the reason for the last change. This can be used to trigger events that deal with state changes.
+		 */
+		am_AvailabilityReason_e availabilityReason;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:09 PM
+	 */
+	struct am_ClassProperty_s
+	{
+
+	public:
+		am_ClassProperty_e classProperty;
+		int16_t value;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:10 PM
+	 */
+	struct am_Crossfader_s
+	{
+
+	public:
+		am_crossfaderID_t crossfaderID;
+		std::string name;
+		am_sinkID_t sinkID_A;
+		am_sinkID_t sinkID_B;
+		am_sourceID_t sourceID;
+		am_HotSink_e hotSink;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:10 PM
+	 */
+	struct am_Gateway_s
+	{
+
+	public:
+		am_gatewayID_t gatewayID;
+		std::string name;
+		am_sinkID_t sinkID;
+		am_sourceID_t sourceID;
+		am_domainID_t domainSinkID;
+		am_domainID_t domainSourceID;
+		am_domainID_t controlDomainID;
+		std::vector<am_ConnectionFormat_e> listSourceFormats;
+		std::vector<am_ConnectionFormat_e> listSinkFormats;
+		/**
+		 * This is matrix holding information about the conversion capability of the gateway, it's length is defined by the length(listSinkFormats) x length(listSourceFormats).

+		 * If a SinkFormat can be converted into a SourceFormat, the vector will hold a 1, if no conversion is possible, a 0.

+		 * The data is stored row orientated, where the rows are related to the sinksFormats and the columns to the sourceFormats. The first value will hold the conversion information from the first sourceFormat to the first sinkFormat for example and the seventh value the information about the 3rd sinkFormat to the 1st sourceFormat in case we would have 3 sourceFormats.

+		 * 

+		 * This matrix 

+		 * 110 011 000 111 001

+		 * 

+		 * reads as this:

+		 *           Source

+		 * 	**  1  2  3 

+		 * *********************

+		 * S	1*  1  1  0 

+		 * i	2*  0  1  1

+		 * n	3*  0  0  0

+		 * k	4*  1  1  1

+		 * 	5*  0  0  1
+		 */
+		std::vector<bool> convertionMatrix;
+
+	};
+
+	/**
+	 * This represents one "hopp" in a route
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:10 PM
+	 */
+	struct am_RoutingElement_s
+	{
+
+	public:
+		am_sourceID_t sourceID;
+		am_sinkID_t sinkID;
+		am_domainID_t domainID;
+		am_ConnectionFormat_e connectionFormat;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:10 PM
+	 */
+	struct am_Route_s
+	{
+
+	public:
+		am_sourceID_t sourceID;
+		am_sinkID_t sinkID;
+		std::vector<am_RoutingElement_s> route;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:10 PM
+	 */
+	struct am_SoundProperty_s
+	{
+
+	public:
+		am_SoundPropertyType_e type;
+		int16_t value;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:10 PM
+	 */
+	struct am_SystemProperty_s
+	{
+
+	public:
+		/**
+		 * the type that is set
+		 */
+		am_SystemPropertyType_e type;
+		/**
+		 * the value
+		 */
+		int16_t value;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:10 PM
+	 */
+	struct am_SinkClass_s
+	{
+
+	public:
+		am_sinkClass_t sinkClassID;
+		std::string name;
+		std::vector<am_ClassProperty_s> listClassProperties;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:10 PM
+	 */
+	struct am_SourceClass_s
+	{
+
+	public:
+		/**
+		 * the source ID
+		 */
+		am_sourceClass_t sourceClassID;
+		std::string name;
+		std::vector<am_ClassProperty_s> listClassProperties;
+
+	};
+
+	/**
+	 * this type holds all information of sources relevant to the HMI
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:10 PM
+	 */
+	struct am_SourceType_s
+	{
+
+	public:
+		am_sourceID_t sourceID;
+		std::string name;
+		am_Availability_s availability;
+		am_sourceClass_t sourceClassID;
+
+	};
+
+	/**
+	 * this type holds all information of sinks relevant to the HMI
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:11 PM
+	 */
+	struct am_SinkType_s
+	{
+
+	public:
+		am_sinkID_t sinkID;
+		std::string name;
+		am_Availability_s availability;
+		am_mainVolume_t volume;
+		am_MuteState_e muteState;
+		am_sinkClass_t sinkClassID;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:11 PM
+	 */
+	struct am_Handle_s
+	{
+
+	public:
+		am_Handle_e handleType:4;
+		uint16_t handle:12;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:11 PM
+	 */
+	struct am_MainSoundProperty_s
+	{
+
+	public:
+		am_MainSoundPropertyType_e type;
+		int16_t value;
+
+	};
+
+	/**
+	 * this type holds all information of connections relevant to the HMI
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:11 PM
+	 */
+	struct am_MainConnectionType_s
+	{
+
+	public:
+		am_mainConnectionID_t mainConnectionID;
+		am_sourceID_t sourceID;
+		am_sinkID_t sinkID;
+		am_timeSync_t delay;
+		am_ConnectionState_e connectionState;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:11 PM
+	 */
+	struct am_MainConnection_s
+	{
+
+	public:
+		am_mainConnectionID_t connectionID;
+		am_ConnectionState_e connectionState;
+		am_Route_s route;
+		am_timeSync_t delay;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:11 PM
+	 */
+	struct am_Sink_s
+	{
+
+	public:
+		am_sinkID_t sinkID;
+		std::string name;
+		am_domainID_t domainID;
+		am_sinkClass_t sinkClassID;
+		am_volume_t volume;
+		bool visible;
+		am_Availability_s available;
+		am_MuteState_e muteState;
+		am_mainVolume_t mainVolume;
+		std::vector<am_SoundProperty_s> listSoundProperties;
+		std::vector<am_ConnectionFormat_e> listConnectionFormats;
+		std::vector<am_MainSoundProperty_s> listMainSoundProperties;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:11 PM
+	 */
+	struct am_Source_s
+	{
+
+	public:
+		am_sourceID_t sourceID;
+		am_domainID_t domainID;
+		std::string name;
+		am_sourceClass_t sourceClassID;
+		am_SourceState_e sourceState;
+		am_volume_t volume;
+		bool visible;
+		am_Availability_s available;
+		am_InterruptState_e interruptState;
+		/**
+		 * This list holds all soundProperties of the source
+		 */
+		std::vector<am_SoundProperty_s> listSoundProperties;
+		/**
+		 * list of the supported ConnectionFormats
+		 */
+		std::vector<am_ConnectionFormat_e> listConnectionFormats;
+		/**
+		 * This list holds all MainSoundProperties of the source (all the ones that can be set via the HMI)
+		 */
+		std::vector<am_MainSoundProperty_s> listMainSoundProperties;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:12 PM
+	 */
+	struct am_Domain_s
+	{
+
+	public:
+		am_domainID_t domainID;
+		std::string name;
+		std::string busname;
+		std::string nodename;
+		bool early;
+		bool complete;
+		am_DomainState_e state;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:12 PM
+	 */
+	struct am_Connection_s
+	{
+
+	public:
+		am_connectionID_t connectionID;
+		am_sourceID_t sourceID;
+		am_sinkID_t sinkID;
+		am_timeSync_t delay;
+		am_ConnectionFormat_e connectionFormat;
+
+	};
+
+	/**
+	 * data type depends of am_EarlyDataType_e:

+	 * volume_t in case of ED_SOURCE_VOLUME, ED_SINK_VOLUME 

+	 * soundProperty_t in case of ED_SOURCE_PROPERTY, ED_SINK_PROPERTY 
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:12 PM
+	 */
+	union am_EarlyData_u
+	{
+
+	public:
+		am_volume_t volume;
+		am_SoundProperty_s soundProperty;
+
+	};
+
+	/**
+	 * data type depends of am_EarlyDataType_e:

+	 * sourceID in case of ED_SOURCE_VOLUME, ED_SOURCE_PROPERTY

+	 * sinkID in case of ED_SINK_VOLUME, ED_SINK_PROPERTY 
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:12 PM
+	 */
+	union am_DataType_u
+	{
+
+	public:
+		am_sinkID_t sink;
+		am_sourceID_t source;
+
+	};
+
+	/**
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:12 PM
+	 */
+	struct am_EarlyData_s
+	{
+
+	public:
+		am_EarlyDataType_e type;
+		am_DataType_u sinksource;
+		am_EarlyData_u data;
+
+	};
+}
+#endif // !defined(EA_230AE76E_21DF_4db5_8CCF_28FE84E8215D__INCLUDED_)
diff --git a/includes/command/CommandReceiveInterface.h b/includes/command/CommandReceiveInterface.h
new file mode 100644
index 0000000..9dae307
--- /dev/null
+++ b/includes/command/CommandReceiveInterface.h
@@ -0,0 +1,184 @@
+/**

+* Copyright (C) 2011, BMW AG

+*

+* GeniviAudioMananger

+*

+* \file  

+*

+* \date 20-Oct-2011 3:42:04 PM

+* \author Christian Mueller (christian.ei.mueller@bmw.de)

+*

+* \section License

+* GNU Lesser General Public License, version 2.1, with special exception (GENIVI clause)

+* Copyright (C) 2011, BMW AG Christian M?ller  Christian.ei.mueller@bmw.de

+*

+* This program is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License, version 2.1, as published by the Free Software Foundation.

+* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License, version 2.1, for more details.

+* You should have received a copy of the GNU Lesser General Public License, version 2.1, along with this program; if not, see <http://www.gnu.org/licenses/lgpl-2.1.html>.

+* Note that the copyright holders assume that the GNU Lesser General Public License, version 2.1, may also be applicable to programs even in cases in which the program is not a library in the technical sense.

+* Linking AudioManager statically or dynamically with other modules is making a combined work based on AudioManager. You may license such other modules under the GNU Lesser General Public License, version 2.1. If you do not want to license your linked modules under the GNU Lesser General Public License, version 2.1, you may use the program under the following exception.

+* As a special exception, the copyright holders of AudioManager give you permission to combine AudioManager with software programs or libraries that are released under any license unless such a combination is not permitted by the license of such a software program or library. You may copy and distribute such a system following the terms of the GNU Lesser General Public License, version 2.1, including this special exception, for AudioManager and the licenses of the other code concerned.

+* Note that people who make modified versions of AudioManager are not obligated to grant this special exception for their modified versions; it is their choice whether to do so. The GNU Lesser General Public License, version 2.1, gives permission to release a modified version without this exception; this exception also makes it possible to release a modified version which carries forward this exception.

+*

+* THIS CODE HAS BEEN GENERATED BY ENTERPRISE ARCHITECT GENIVI MODEL. PLEASE CHANGE ONLY IN ENTERPRISE ARCHITECT AND GENERATE AGAIN

+*/

+#if !defined(EA_319110B3_2FDC_4a9a_8267_033D5DB6D48E__INCLUDED_)

+#define EA_319110B3_2FDC_4a9a_8267_033D5DB6D48E__INCLUDED_

+

+#include <vector>

+#include <string>

+#include "../audiomanagertypes.h"

+class DBusWrapper;

+
+
+namespace am {
+	/**
+	 * The interface towards the Controlling Instance (e.g HMI). It handles the communication towards the HMI and other system components who need to interact with the audiomanagement.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:13 PM
+	 */
+	class CommandReceiveInterface
+	{
+
+	public:
+		/**
+		 * connects a source to sink

+		 * @return E_OK on success, E_NOT_POSSIBLE on failure, E_ALREADY_EXISTS if the connection does already exists
+		 * 
+		 * @param sourceID
+		 * @param sinkID
+		 * @param mainConnectionID
+		 */
+		virtual am_Error_e connect(const am_sourceID_t sourceID, const am_sinkID_t sinkID, am_mainConnectionID_t& mainConnectionID) =0;
+		/**
+		 * disconnects a mainConnection

+		 * @return E_OK on successes, E_NON_EXISTENT if the connection does not exist, E_NOT_POSSIBLE on error.
+		 * 
+		 * @param mainConnectionID
+		 */
+		virtual am_Error_e disconnect(const am_mainConnectionID_t mainConnectionID) =0;
+		/**
+		 * sets the volume for a sink

+		 * @return E_OK on success, E_UNKOWN on error, E_OUT_OF_RANGE in case the value is out of range
+		 * 
+		 * @param sinkID    the sink
+		 * @param volume    the volume
+		 */
+		virtual am_Error_e setVolume(const am_sinkID_t sinkID, const am_mainVolume_t volume) =0;
+		/**
+		 * This function is used to increment or decrement the current volume for a sink.

+		 * @return E_OK on success, E_UNKNOWN on error and E_OUT_OF_RANGE if the value is not in the given volume range.
+		 * 
+		 * @param sinkID
+		 * @param volumeStep    indicated the number of steps that should be incremented or decremented. Positive values here inkrement, negative values decrement
+		 */
+		virtual am_Error_e volumeStep(const am_sinkID_t sinkID, const int16_t volumeStep) =0;
+		/**
+		 * sets the mute state of a sink

+		 * @return E_OK on success, E_UNKNOWN on error. If the mute state is already the desired one, the Daemon will return E_OK.
+		 * 
+		 * @param sinkID
+		 * @param muteState
+		 */
+		virtual am_Error_e setSinkMuteState(const am_sinkID_t sinkID, const am_MuteState_e muteState) =0;
+		/**
+		 * This method is used to set sound properties, e.g. Equalizer Values. Since the capabilities of the system can differ, the exact key value pairs can be extended in each product

+		 * @return E_OK on success, E_OUT_OF_RANGE if value exceeds range, E_UNKNOWN in case of an error
+		 * 
+		 * @param soundProperty
+		 * @param sinkID
+		 */
+		virtual am_Error_e setMainSinkSoundProperty(const am_MainSoundProperty_s& soundProperty, const am_sinkID_t sinkID) =0;
+		/**
+		 * This method is used to set sound properties, e.g. Equalizer Values. Since the capabilities of the system can differ, the exact key value pairs can be extended in each product

+		 * @return E_OK on success, E_OUT_OF_RANGE if value exceeds range, E_UNKNOWN in case of an error
+		 * 
+		 * @param soundProperty
+		 * @param sourceID
+		 */
+		virtual am_Error_e setMainSourceSoundProperty(const am_MainSoundProperty_s& soundProperty, const am_sourceID_t sourceID) =0;
+		/**
+		 * is used to set a specific system property.

+		 * @return E_OK on success, E_OUT_OF_RANGE if value exceeds range, E_UNKNOWN in case of an error
+		 * 
+		 * @param property    the property that shall be set
+		 */
+		virtual am_Error_e setSystemProperty(const am_SystemProperty_s& property) =0;
+		/**
+		 * returns the actual list of MainConnections

+		 * @return E_OK on success, E_DATABASE_ERROR on error 
+		 * 
+		 * @param listConnections    returns a list of all connections
+		 */
+		virtual am_Error_e getListMainConnections(std::vector<am_MainConnectionType_s>& listConnections) const =0;
+		/**
+		 * returns the actual list of Sinks

+		 * @return E_OK on success, E_DATABASE_ERROR on error 
+		 * 
+		 * @param listMainSinks    the list of the sinks
+		 */
+		virtual am_Error_e getListMainSinks(std::vector<am_SinkType_s>& listMainSinks) const =0;
+		/**
+		 * returns the actual list of Sources

+		 * @return E_OK on success, E_DATABASE_ERROR on error 
+		 * 
+		 * @param listMainSources    the list of sources
+		 */
+		virtual am_Error_e getListMainSources(std::vector<am_SourceType_s>& listMainSources) const =0;
+		/**
+		 * This is used to retrieve all source sound properties related to a source. Returns a vector of the sound properties and values as pair

+		 * @return E_OK on success, E_DATABASE_ERROR on error 
+		 * 
+		 * @param sinkID
+		 * @param listSoundProperties
+		 */
+		virtual am_Error_e getListMainSinkSoundProperties(const am_sinkID_t sinkID, std::vector<am_MainSoundProperty_s>& listSoundProperties) const =0;
+		/**
+		 * This is used to retrieve all source sound properties related to a source.

+		 * @return E_OK on success, E_DATABASE_ERROR on error 
+		 * 
+		 * @param sourceID
+		 * @param listSourceProperties
+		 */
+		virtual am_Error_e getListMainSourceSoundProperties(const am_sourceID_t sourceID, std::vector<am_MainSoundProperty_s>& listSourceProperties) const =0;
+		/**
+		 * This is used to retrieve SourceClass Information of all source classes 

+		 * @return E_OK on success, E_DATABASE_ERROR on error 
+		 * 
+		 * @param listSourceClasses
+		 */
+		virtual am_Error_e getListSourceClasses(std::vector<am_SourceClass_s>& listSourceClasses) const =0;
+		/**
+		 * This is used to retrieve SinkClass Information of all sink classes 

+		 * @return E_OK on success, E_DATABASE_ERROR on error 
+		 * 
+		 * @param listSinkClasses
+		 */
+		virtual am_Error_e getListSinkClasses(std::vector<am_SinkClass_s>& listSinkClasses) const =0;
+		/**
+		 * Retrieves a complete list of all systemProperties.

+		 * @return E_OK on success, E_DATABASE_ERROR on error 
+		 * 
+		 * @param listSystemProperties
+		 */
+		virtual am_Error_e getListSystemProperties(std::vector<am_SystemProperty_s>& listSystemProperties) const =0;
+		/**
+		 * returns the delay in ms that the audiopath for the given mainConnection has

+		 * @return E_OK on success, E_NOT_POSSIBLE if timing information is not yet retrieved, E_DATABASE_ERROR on read error on the database
+		 * 
+		 * @param mainConnectionID
+		 * @param delay
+		 */
+		virtual am_Error_e getTimingInformation(const am_mainConnectionID_t mainConnectionID, am_timeSync_t& delay) const =0;
+		/**
+		 * this function is used to retrieve a pointer to the dBusConnectionWrapper

+		 * @return E_OK if pointer is valid, E_UKNOWN on error
+		 * 
+		 * @param dbusConnectionWrapper    This is a wrapper class that is needed to keep dbus inclusions away from the interface. The DBusWrapperClass will return the pointer to the DbusConnection call (getDBusConnection)
+		 */
+		virtual am_Error_e getDBusConnectionWrapper(DBusWrapper*& dbusConnectionWrapper) const =0;
+
+	};
+}
+#endif // !defined(EA_319110B3_2FDC_4a9a_8267_033D5DB6D48E__INCLUDED_)
diff --git a/includes/command/CommandSendInterface.h b/includes/command/CommandSendInterface.h
new file mode 100644
index 0000000..77f8795
--- /dev/null
+++ b/includes/command/CommandSendInterface.h
@@ -0,0 +1,151 @@
+/**

+* Copyright (C) 2011, BMW AG

+*

+* GeniviAudioMananger

+*

+* \file  

+*

+* \date 20-Oct-2011 3:42:04 PM

+* \author Christian Mueller (christian.ei.mueller@bmw.de)

+*

+* \section License

+* GNU Lesser General Public License, version 2.1, with special exception (GENIVI clause)

+* Copyright (C) 2011, BMW AG Christian M?ller  Christian.ei.mueller@bmw.de

+*

+* This program is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License, version 2.1, as published by the Free Software Foundation.

+* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License, version 2.1, for more details.

+* You should have received a copy of the GNU Lesser General Public License, version 2.1, along with this program; if not, see <http://www.gnu.org/licenses/lgpl-2.1.html>.

+* Note that the copyright holders assume that the GNU Lesser General Public License, version 2.1, may also be applicable to programs even in cases in which the program is not a library in the technical sense.

+* Linking AudioManager statically or dynamically with other modules is making a combined work based on AudioManager. You may license such other modules under the GNU Lesser General Public License, version 2.1. If you do not want to license your linked modules under the GNU Lesser General Public License, version 2.1, you may use the program under the following exception.

+* As a special exception, the copyright holders of AudioManager give you permission to combine AudioManager with software programs or libraries that are released under any license unless such a combination is not permitted by the license of such a software program or library. You may copy and distribute such a system following the terms of the GNU Lesser General Public License, version 2.1, including this special exception, for AudioManager and the licenses of the other code concerned.

+* Note that people who make modified versions of AudioManager are not obligated to grant this special exception for their modified versions; it is their choice whether to do so. The GNU Lesser General Public License, version 2.1, gives permission to release a modified version without this exception; this exception also makes it possible to release a modified version which carries forward this exception.

+*

+* THIS CODE HAS BEEN GENERATED BY ENTERPRISE ARCHITECT GENIVI MODEL. PLEASE CHANGE ONLY IN ENTERPRISE ARCHITECT AND GENERATE AGAIN

+*/

+#if !defined(EA_6CB1E10C_DCF5_48af_9B00_98330CA044BB__INCLUDED_)

+#define EA_6CB1E10C_DCF5_48af_9B00_98330CA044BB__INCLUDED_

+

+#include <vector>

+#include <string>

+#include "../audiomanagertypes.h"

+#include "CommandReceiveInterface.h"
+
+#include "CommandReceiveInterface.h"
+
+namespace am {
+	/**
+	 * This interface handles all communication from the AudioManagerDaemon towards the system. It is designed in such a way that only callbacks with no return types are implemented. So when the CommandInterfacePlugins are designed in such a way that they broadcast signals to any node who is interested in the particular information (like signals on Dbus for example), more information can be retrieved via the CommandReceiveInterface.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:13 PM
+	 */
+	class CommandSendInterface
+	{
+
+	public:
+		/**
+		 * This command starts the interface, the plugin itself. This is not meant to start communication with the HMI itself. It is a good idea to implement here everything that sets up the basic communication like DbusCommunication etc...

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param commandreceiveinterface    pointer to the receive interface. Is used to call the audiomanagerdaemon
+		 */
+		virtual am_Error_e startupInterface(CommandReceiveInterface* commandreceiveinterface) =0;
+		/**
+		 * This command stops the interface before the plugin is unloaded.

+		 * @return E_OK on success, E_UNKNOWN on error
+		 */
+		virtual am_Error_e stopInterface() =0;
+		/**
+		 * This callback is fired when the Interface is ready to be used. Before this command, all communication will be ignored by the Audiomanager
+		 */
+		virtual am_Error_e cbCommunicationReady() =0;
+		/**
+		 * This callback is fired when the AudioManager is about to rundown. After this command no more action will be carried out by the AudioManager.
+		 */
+		virtual am_Error_e cbCommunicationRundown() =0;
+		/**
+		 * Callback that is called when the number of connections change
+		 */
+		virtual void cbNumberOfMainConnectionsChanged() =0;
+		/**
+		 * Callback that is called when the number of sinks change
+		 */
+		virtual void cbNumberOfSinksChanged() =0;
+		/**
+		 * Callback that is called when the number of sources change
+		 */
+		virtual void cbNumberOfSourcesChanged() =0;
+		/**
+		 * this callback is fired if the number of sink classes changed
+		 */
+		virtual void cbNumberOfSinkClassesChanged() =0;
+		/**
+		 * this callback is fired if the number of source classes changed
+		 */
+		virtual void cbNumberOfSourceClassesChanged() =0;
+		/**
+		 * This callback is called when the ConnectionState of a connection changed.
+		 * 
+		 * @param connectionID
+		 * @param connectionState
+		 */
+		virtual void cbMainConnectionStateChanged(const am_mainConnectionID_t connectionID, const am_ConnectionState_e connectionState) =0;
+		/**
+		 * this callback indicates that a sinkSoundProperty has changed.
+		 * 
+		 * @param sinkID
+		 * @param soundProperty
+		 */
+		virtual void cbMainSinkSoundPropertyChanged(const am_sinkID_t sinkID, const am_MainSoundProperty_s soundProperty) =0;
+		/**
+		 * this callback indicates that a sourceSoundProperty has changed.
+		 * 
+		 * @param sourceID
+		 * @param soundProperty
+		 */
+		virtual void cbMainSourceSoundPropertyChanged(const am_sourceID_t sourceID, const am_MainSoundProperty_s& soundProperty) =0;
+		/**
+		 * this callback is called when the availability of a sink has changed
+		 * 
+		 * @param sinkID
+		 * @param availability
+		 */
+		virtual void cbSinkAvailabilityChanged(const am_sinkID_t sinkID, const am_Availability_s& availability) =0;
+		/**
+		 * this callback is called when the availability of source has changed.
+		 * 
+		 * @param sourceID
+		 * @param availability
+		 */
+		virtual void cbSourceAvailabilityChanged(const am_sourceID_t sourceID, const am_Availability_s& availability) =0;
+		/**
+		 * this callback indicates a volume change on the indicated sink
+		 * 
+		 * @param sinkID
+		 * @param volume
+		 */
+		virtual void cbVolumeChanged(const am_sinkID_t sinkID, const am_mainVolume_t volume) =0;
+		/**
+		 * this callback indicates a mute state change on a sink.
+		 * 
+		 * @param sinkID
+		 * @param muteState
+		 */
+		virtual void cbSinkMuteStateChanged(const am_sinkID_t sinkID, const am_MuteState_e muteState) =0;
+		/**
+		 * is fired if a systemProperty changed
+		 * 
+		 * @param systemProperty
+		 */
+		virtual void cbSystemPropertyChanged(const am_SystemProperty_s& systemProperty) =0;
+		/**
+		 * this callback is called when the timinginformation for a mainconnection has changed.
+		 * 
+		 * @param mainConnection
+		 * @param time
+		 */
+		virtual void cbTimingInformationChanged(const am_mainConnectionID_t mainConnection, const am_timeSync_t time) =0;
+
+	};
+}
+#endif // !defined(EA_6CB1E10C_DCF5_48af_9B00_98330CA044BB__INCLUDED_)
diff --git a/includes/control/ControlReceiveInterface.h b/includes/control/ControlReceiveInterface.h
new file mode 100644
index 0000000..4e20e71
--- /dev/null
+++ b/includes/control/ControlReceiveInterface.h
@@ -0,0 +1,531 @@
+/**

+* Copyright (C) 2011, BMW AG

+*

+* GeniviAudioMananger

+*

+* \file  

+*

+* \date 20-Oct-2011 3:42:04 PM

+* \author Christian Mueller (christian.ei.mueller@bmw.de)

+*

+* \section License

+* GNU Lesser General Public License, version 2.1, with special exception (GENIVI clause)

+* Copyright (C) 2011, BMW AG Christian M?ller  Christian.ei.mueller@bmw.de

+*

+* This program is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License, version 2.1, as published by the Free Software Foundation.

+* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License, version 2.1, for more details.

+* You should have received a copy of the GNU Lesser General Public License, version 2.1, along with this program; if not, see <http://www.gnu.org/licenses/lgpl-2.1.html>.

+* Note that the copyright holders assume that the GNU Lesser General Public License, version 2.1, may also be applicable to programs even in cases in which the program is not a library in the technical sense.

+* Linking AudioManager statically or dynamically with other modules is making a combined work based on AudioManager. You may license such other modules under the GNU Lesser General Public License, version 2.1. If you do not want to license your linked modules under the GNU Lesser General Public License, version 2.1, you may use the program under the following exception.

+* As a special exception, the copyright holders of AudioManager give you permission to combine AudioManager with software programs or libraries that are released under any license unless such a combination is not permitted by the license of such a software program or library. You may copy and distribute such a system following the terms of the GNU Lesser General Public License, version 2.1, including this special exception, for AudioManager and the licenses of the other code concerned.

+* Note that people who make modified versions of AudioManager are not obligated to grant this special exception for their modified versions; it is their choice whether to do so. The GNU Lesser General Public License, version 2.1, gives permission to release a modified version without this exception; this exception also makes it possible to release a modified version which carries forward this exception.

+*

+* THIS CODE HAS BEEN GENERATED BY ENTERPRISE ARCHITECT GENIVI MODEL. PLEASE CHANGE ONLY IN ENTERPRISE ARCHITECT AND GENERATE AGAIN

+*/

+#if !defined(EA_6440518C_5204_4a7c_A4B6_21BF187D8876__INCLUDED_)

+#define EA_6440518C_5204_4a7c_A4B6_21BF187D8876__INCLUDED_

+

+#include <vector>

+#include <string>

+#include "../audiomanagertypes.h"
+
+namespace am {
+	/**
+	 * This interface gives access to all important functions of the audiomanager that are used by the AudioManagerController to control the system.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:13 PM
+	 */
+	class ControlReceiveInterface
+	{
+
+	public:
+		/**
+		 * calculates a route from source to sink.

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param onlyfree    if true return only routes which use gateways that are not in use at the moment
+		 * @param sourceID
+		 * @param sinkID
+		 * @param returnList    this is a list of routes that are possible to take. unsorted! The longest could be first.

+		 * In case not route can be found, the list will return empty.
+		 */
+		virtual am_Error_e getRoute(const bool onlyfree, const am_sourceID_t sourceID, const am_sinkID_t sinkID, std::vector<am_Route_s>& returnList) =0;
+		/**
+		 * With this function, elementary connects can be triggered by the controller.

+		 * @return E_OK on success, E_UNKNOWN on error, E_WRONG_FORMAT of connectionFormats do not match, E_NO_CHANGE if the desired connection is already build up
+		 * 
+		 * @param handle
+		 * @param connectionID
+		 * @param format
+		 * @param sourceID
+		 * @param sinkID
+		 */
+		virtual am_Error_e connect(am_Handle_s& handle, am_connectionID_t& connectionID, const am_ConnectionFormat_e format, const am_sourceID_t sourceID, const am_sinkID_t sinkID) =0;
+		/**
+		 * is used to disconnect a connection

+		 * @return E_OK on success, E_UNKNOWN on error, E_NON_EXISTENT if connection was not found, E_NO_CHANGE if no change is neccessary
+		 * 
+		 * @param handle
+		 * @param connectionID
+		 */
+		virtual am_Error_e disconnect(am_Handle_s& handle, const am_connectionID_t connectionID) =0;
+		/**
+		 * triggers a cross fade.

+		 * @return E_OK on success, E_UNKNOWN on error E_NO_CHANGE if no change is neccessary
+		 * 
+		 * @param handle
+		 * @param hotSource    this is the source that is going to be the active one after the fading
+		 * @param crossfaderID
+		 * @param rampType
+		 * @param rampTime    rampTime 0 means default value
+		 */
+		virtual am_Error_e crossfade(am_Handle_s& handle, const am_HotSink_e hotSource, const am_crossfaderID_t crossfaderID, const am_RampType_e rampType, const am_time_t rampTime) =0;
+		/**
+		 * with this method, all actions that have a handle assigned can be stopped.

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param handle    the handle of the action to be stopped
+		 */
+		virtual am_Error_e abortAction(const am_Handle_s handle) =0;
+		/**
+		 * this method sets a source state for a source. This function will trigger the callback cbAckSetSourceState

+		 * @return E_OK on success, E_NO_CHANGE if the desired value is already correct, E_UNKNOWN on error, E_NO_CHANGE if no change is neccessary 
+		 * 
+		 * @param handle
+		 * @param sourceID
+		 * @param state
+		 */
+		virtual am_Error_e setSourceState(am_Handle_s& handle, const am_sourceID_t sourceID, const am_SourceState_e state) =0;
+		/**
+		 * with this function, setting of sinks volumes is done. The behavior of the volume set is depended on the given ramp and time information.

+		 * This function is not only used to ramp volume, but also to mute and direct set the level. Exact behavior is depended on the selected mute ramps.

+		 * @return E_OK on success, E_NO_CHANGE if the volume is already on the desired value, E_OUT_OF_RANGE is the volume is out of range, E_UNKNOWN on every other error.
+		 * 
+		 * @param handle
+		 * @param sinkID
+		 * @param volume
+		 * @param ramp
+		 * @param time
+		 */
+		virtual am_Error_e setSinkVolume(am_Handle_s& handle, const am_sinkID_t sinkID, const am_volume_t volume, const am_RampType_e ramp, const am_time_t time) =0;
+		/**
+		 * with this function, setting of source volumes is done. The behavior of the volume set is depended on the given ramp and time information.

+		 * This function is not only used to ramp volume, but also to mute and direct set the level. Exact behavior is depended on the selected mute ramps.

+		 * @return E_OK on success, E_NO_CHANGE if the volume is already on the desired value, E_OUT_OF_RANGE is the volume is out of range, E_UNKNOWN on every other error.
+		 * 
+		 * @param handle
+		 * @param sourceID
+		 * @param volume
+		 * @param rampType
+		 * @param time
+		 */
+		virtual am_Error_e setSourceVolume(am_Handle_s& handle, const am_sourceID_t sourceID, const am_volume_t volume, const am_RampType_e rampType, const am_time_t time) =0;
+		/**
+		 * is used to set sinkSoundProperties

+		 * @return E_OK on success, E_UNKNOWN on error, E_OUT_OF_RANGE  if property is out of range, E_NO_CHANGE if no change is neccessary
+		 * 
+		 * @param handle
+		 * @param sinkID
+		 * @param soundProperty
+		 */
+		virtual am_Error_e setSinkSoundProperty(am_Handle_s& handle, const am_sinkID_t sinkID, const am_SoundProperty_s& soundProperty) =0;
+		/**
+		 * is used to set sourceSoundProperties

+		 * @return E_OK on success, E_UNKNOWN on error, E_OUT_OF_RANGE  if property is out of range. E_NO_CHANGE if no change is neccessary
+		 * 
+		 * @param handle
+		 * @param sourceID
+		 * @param soundProperty
+		 */
+		virtual am_Error_e setSourceSoundProperty(am_Handle_s& handle, const am_sourceID_t sourceID, const am_SoundProperty_s& soundProperty) =0;
+		/**
+		 * sets the domain state of a domain

+		 * @return E_OK on success, E_UNKNOWN on error, E_NO_CHANGE if no change is neccessary
+		 * 
+		 * @param domainID
+		 * @param domainState
+		 */
+		virtual am_Error_e setDomainState(const am_domainID_t domainID, const am_DomainState_e domainState) =0;
+		/**
+		 * enters a domain in the database, creates and ID

+		 * @return E_OK on success, E_ALREADY_EXISTENT if the ID or name is already in the database, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param domainData    domainID in am_Domain_s must be 0 here
+		 * @param domainID
+		 */
+		virtual am_Error_e enterDomainDB(const am_Domain_s& domainData, am_domainID_t& domainID) =0;
+		/**
+		 * enters a mainconnection in the database, creates and ID

+		 * @return E_OK on success, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param mainConnectionData    the MainConnectionID is omitted since it is created during the registration
+		 * @param connectionID
+		 */
+		virtual am_Error_e enterMainConnectionDB(const am_MainConnection_s& mainConnectionData, am_mainConnectionID_t& connectionID) =0;
+		/**
+		 * enters a sink in the database.

+		 * The sinkID in am_Sink_s shall be 0 in case of a dynamic added source A sinkID greater than 100 will be assigned. If a specific sinkID with a value <100 is given, the given value will be used. This is for a static setup where the ID's are predefined.

+		 * @return E_OK on success, E_ALREADY_EXISTENT if the ID or name is already in the database, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param sinkData    the sinkID will be omitted since it is created during the registration
+		 * @param sinkID
+		 */
+		virtual am_Error_e enterSinkDB(const am_Sink_s& sinkData, am_sinkID_t& sinkID) =0;
+		/**
+		 * enters a crossfader in the database.

+		 * The crossfaderID in am_Crossfader_s shall be 0 in case of a dynamic added source A crossfaderID greater than 100 will be assigned. If a specific crossfaderID with a value <100 is given, the given value will be used. This is for a static setup where the ID's are predefined.

+		 * @return E_OK on success, E_ALREADY_EXISTENT if the ID or name is already in the database, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param crossfaderData    the ID in the data will be ignored since it is created during the registration
+		 * @param crossfaderID
+		 */
+		virtual am_Error_e enterCrossfaderDB(const am_Crossfader_s& crossfaderData, am_crossfaderID_t& crossfaderID) =0;
+		/**
+		 * enters a gateway in the database.

+		 * The gatewayID in am_Gateway_s shall be 0 in case of a dynamic added source A gatewayID greater than 100 will be assigned. If a specific gatewayID with a value <100 is given, the given value will be used. This is for a static setup where the ID's are predefined.

+		 * @return E_OK on success, E_ALREADY_EXISTENT if the ID or name is already in the database, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param gatewayData    In a fixed setup, the gatewayID must be below 100. In a dynamic setup, the gatewayID shall be 0! listSourceFormats and listSinkFormats are empty at registration time. Values are taken over when sources and sinks are registered.
+		 * @param gatewayID
+		 */
+		virtual am_Error_e enterGatewayDB(const am_Gateway_s& gatewayData, am_gatewayID_t& gatewayID) =0;
+		/**
+		 * enters a source in the database.

+		 * The sourceID in am_Source_s shall be 0 in case of a dynamic added source A sourceID greater than 100 will be assigned. If a specific sourceID with a value <100 is given, the given value will be used. This is for a static setup where the ID's are predefined.

+		 * @return E_OK on success, E_ALREADY_EXISTENT if the ID or name is already in the database, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param sourceData    sourceID is omitted here since it is created during registration
+		 * @param sourceID
+		 */
+		virtual am_Error_e enterSourceDB(const am_Source_s& sourceData, am_sourceID_t& sourceID) =0;
+		/**
+		 * Enters a sourceClass into the database.

+		 * @return E_OK on success, E_ALREADY_EXISTENT if the ID or name is already in the database, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param sinkClass    IDs given with the SinkCLassID are valid below 100 (static). If given as 0, sinkClass will be enterd dynamic and ID above 100 will be created.
+		 * @param sinkClassID
+		 */
+		virtual am_Error_e enterSinkClassDB(const am_SinkClass_s& sinkClass, am_sinkClass_t& sinkClassID) =0;
+		/**
+		 * Enters a sourceClass into the database.

+		 * The sourceClassID in am_sourceClass_s shall be 0 in case of a dynamic added source A sourceClassID greater than 100 will be assigned. If a specific sourceClassID with a value <100 is given, the given value will be used. This is for a static setup where the ID's are predefined.

+		 * @return E_OK on success, E_ALREADY_EXISTENT if the ID or name is already in the database, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param sourceClassID
+		 * @param sourceClass    IDs given with the SourceCLassID are valid below 100 (static). If given as 0, sourceClass will be enterd dynamic and ID above 100 will be created.
+		 */
+		virtual am_Error_e enterSourceClassDB(am_sourceClass_t& sourceClassID, const am_SourceClass_s& sourceClass) =0;
+		/**
+		 * changes class information of a sinkclass.

+		 * The properties will overwrite the values of the sinkClassID given in the sinkClass.

+		 * It is the duty of the controller to check if the property is valid. If it does not exist, the daemon will not return an error.

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if sinkClassID was not found. 
+		 * 
+		 * @param sinkClass    if a SourceClass ID other than 0 is given, the classInformation replaces the existing one. In case of ClassID 0, a new classID is created and returned
+		 */
+		virtual am_Error_e changeSinkClassInfoDB(const am_SinkClass_s& sinkClass) =0;
+		/**
+		 * changes class information of a sourceClass. 

+		 * The properties will overwrite the values of the sourceClassID given in the sourceClass.

+		 * It is the duty of the controller to check if the property is valid. If it does not exist, the daemon will not return an error.

+		 * @return E_OK on success, E_DATABASE_ERROR on error and E_NON_EXISTENT if the ClassID does not exist.
+		 * 
+		 * @param sourceClass    if a SourceClass ID other than 0 is given, the classInformation replaces the existing one. In case of ClassID 0, a new classID is created and returned
+		 */
+		virtual am_Error_e changeSourceClassInfoDB(const am_SourceClass_s& sourceClass) =0;
+		/**
+		 * This function is used to enter the system Properties into the database.

+		 * All entries in the database will be erased before entering the new List. It should only be called once at system startup.

+		 * @return E_OK on success,  E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param listSystemProperties
+		 */
+		virtual am_Error_e enterSystemPropertiesListDB(const std::vector<am_SystemProperty_s>& listSystemProperties) =0;
+		/**
+		 * changes the mainConnectionState of MainConnection

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if mainconnection
+		 * 
+		 * @param mainconnectionID
+		 * @param route
+		 */
+		virtual am_Error_e changeMainConnectionRouteDB(const am_mainConnectionID_t mainconnectionID, const am_Route_s& route) =0;
+		/**
+		 * changes the mainConnectionState of MainConnection

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if mainconnection
+		 * 
+		 * @param mainconnectionID
+		 * @param connectionState
+		 */
+		virtual am_Error_e changeMainConnectionStateDB(const am_mainConnectionID_t mainconnectionID, const am_ConnectionState_e connectionState) =0;
+		/**
+		 * changes the sink volume of a sink

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if sink was not found
+		 * 
+		 * @param mainVolume
+		 * @param sinkID
+		 */
+		virtual am_Error_e changeSinkMainVolumeDB(const am_mainVolume_t mainVolume, const am_sinkID_t sinkID) =0;
+		/**
+		 * changes the availablility of a sink

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if sink was not found
+		 * 
+		 * @param availability
+		 * @param sinkID
+		 */
+		virtual am_Error_e changeSinkAvailabilityDB(const am_Availability_s& availability, const am_sinkID_t sinkID) =0;
+		/**
+		 * changes the domainstate of a domain 

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if domain was not found
+		 * 
+		 * @param domainState
+		 * @param domainID
+		 */
+		virtual am_Error_e changDomainStateDB(const am_DomainState_e domainState, const am_domainID_t domainID) =0;
+		/**
+		 * changes the mute state of a sink

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if sink was not found 
+		 * 
+		 * @param muteState
+		 * @param sinkID
+		 */
+		virtual am_Error_e changeSinkMuteStateDB(const am_MuteState_e muteState, const am_sinkID_t sinkID) =0;
+		/**
+		 * changes the mainsinksoundproperty of a sink

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if sink was not found
+		 * 
+		 * @param soundProperty
+		 * @param sinkID
+		 */
+		virtual am_Error_e changeMainSinkSoundPropertyDB(const am_MainSoundProperty_s& soundProperty, const am_sinkID_t sinkID) =0;
+		/**
+		 * changes the mainsourcesoundproperty of a sink

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if source was not found
+		 * 
+		 * @param soundProperty
+		 * @param sourceID
+		 */
+		virtual am_Error_e changeMainSourceSoundPropertyDB(const am_MainSoundProperty_s& soundProperty, const am_sourceID_t sourceID) =0;
+		/**
+		 * changes the availablility of a source

+		 * @return E_OK on success, E_DATABASE_ERROR  on error, E_NON_EXISTENT if source was not found
+		 * 
+		 * @param availability
+		 * @param sourceID
+		 */
+		virtual am_Error_e changeSourceAvailabilityDB(const am_Availability_s& availability, const am_sourceID_t sourceID) =0;
+		/**
+		 * changes a systemProperty

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if property was not found
+		 * 
+		 * @param property
+		 */
+		virtual am_Error_e changeSystemPropertyDB(const am_SystemProperty_s& property) =0;
+		/**
+		 * removes a mainconnection from the DB

+		 * @return E_OK on success, E_NON_EXISTENT if main connection was not found, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param mainConnectionID
+		 */
+		virtual am_Error_e removeMainConnectionDB(const am_mainConnectionID_t mainConnectionID) =0;
+		/**
+		 * removes a sink from the DB

+		 * @return E_OK on success, E_NON_EXISTENT if sink was not found, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param sinkID
+		 */
+		virtual am_Error_e removeSinkDB(const am_sinkID_t sinkID) =0;
+		/**
+		 * removes a source from the DB

+		 * @return E_OK on success, E_NON_EXISTENT if source was not found, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param sourceID
+		 */
+		virtual am_Error_e removeSourceDB(const am_sourceID_t sourceID) =0;
+		/**
+		 * removes a gateway from the DB

+		 * @return E_OK on success, E_NON_EXISTENT if gateway was not found, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param gatewayID
+		 */
+		virtual am_Error_e removeGatewayDB(const am_gatewayID_t gatewayID) =0;
+		/**
+		 * removes a crossfader from the DB

+		 * @return E_OK on success, E_NON_EXISTENT if crossfader was not found, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param crossfaderID
+		 */
+		virtual am_Error_e removeCrossfaderDB(const am_crossfaderID_t crossfaderID) =0;
+		/**
+		 * removes a domain from the DB

+		 * @return E_OK on success, E_NON_EXISTENT if domain was not found, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param domainID
+		 */
+		virtual am_Error_e removeDomainDB(const am_domainID_t domainID) =0;
+		/**
+		 * removes a domain from the DB

+		 * @return E_OK on success, E_NON_EXISTENT if domain was not found, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param sinkClassID
+		 */
+		virtual am_Error_e removeSinkClassDB(const am_sinkClass_t sinkClassID) =0;
+		/**
+		 * removes a domain from the DB

+		 * @return E_OK on success, E_NON_EXISTENT if domain was not found, E_DATABASE_ERROR if the database had an error
+		 * 
+		 * @param sourceClassID
+		 */
+		virtual am_Error_e removeSourceClassDB(const am_sourceClass_t sourceClassID) =0;
+		/**
+		 * returns the ClassInformation of a source

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if source was not found
+		 * 
+		 * @param sourceID
+		 * @param classInfo
+		 */
+		virtual am_Error_e getSourceClassInfoDB(const am_sourceID_t sourceID, am_SourceClass_s& classInfo) const =0;
+		/**
+		 * returns the ClassInformation of a sink

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if sink was not found
+		 * 
+		 * @param sinkID
+		 * @param sinkClass
+		 */
+		virtual am_Error_e getSinkClassInfoDB(const am_sinkID_t sinkID, am_SinkClass_s& sinkClass) const =0;
+		/**
+		 * return source and sink of a gateway

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if gateway was not found
+		 * 
+		 * @param gatewayID
+		 * @param gatewayData
+		 */
+		virtual am_Error_e getGatewayInfoDB(const am_gatewayID_t gatewayID, am_Gateway_s& gatewayData) const =0;
+		/**
+		 * returns sources and the sink of a crossfader

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if crossfader was not found
+		 * 
+		 * @param crossfaderID
+		 * @param crossfaderData
+		 */
+		virtual am_Error_e getCrossfaderInfoDB(const am_crossfaderID_t crossfaderID, am_Crossfader_s& crossfaderData) const =0;
+		/**
+		 * returns all sinks of a domain

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if domain was not found
+		 * 
+		 * @param domainID
+		 * @param listSinkID
+		 */
+		virtual am_Error_e getListSinksOfDomain(const am_domainID_t domainID, std::vector<am_sinkID_t>& listSinkID) const =0;
+		/**
+		 * returns all source of a domain

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if domain was not found
+		 * 
+		 * @param domainID
+		 * @param listSourceID
+		 */
+		virtual am_Error_e getListSourcesOfDomain(const am_domainID_t domainID, std::vector<am_sourceID_t>& listSourceID) const =0;
+		/**
+		 * returns all crossfaders of a domain

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if domain was not found
+		 * 
+		 * @param domainID
+		 * @param listCrossfadersID
+		 */
+		virtual am_Error_e getListCrossfadersOfDomain(const am_domainID_t domainID, std::vector<am_crossfaderID_t>& listCrossfadersID) const =0;
+		/**
+		 * returns all gateways of a domain

+		 * @return E_OK on success, E_DATABASE_ERROR on error, E_NON_EXISTENT if domain was not found
+		 * 
+		 * @param domainID
+		 * @param listGatewaysID
+		 */
+		virtual am_Error_e getListGatewaysOfDomain(const am_domainID_t domainID, std::vector<am_gatewayID_t>& listGatewaysID) const =0;
+		/**
+		 * returns a complete list of all MainConnections

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listMainConnections
+		 */
+		virtual am_Error_e getListMainConnections(std::vector<am_MainConnection_s>& listMainConnections) const =0;
+		/**
+		 * returns a complete list of all domains

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listDomains
+		 */
+		virtual am_Error_e getListDomains(std::vector<am_Domain_s>& listDomains) const =0;
+		/**
+		 * returns a complete list of all Connections

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listConnections
+		 */
+		virtual am_Error_e getListConnections(std::vector<am_Connection_s>& listConnections) const =0;
+		/**
+		 * returns a list of all sinks

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listSinks
+		 */
+		virtual am_Error_e getListSinks(std::vector<am_Sink_s>& listSinks) const =0;
+		/**
+		 * returns a list of all sources

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listSources
+		 */
+		virtual am_Error_e getListSources(std::vector<am_Source_s>& listSources) const =0;
+		/**
+		 * returns a list of all source classes

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listSourceClasses
+		 */
+		virtual am_Error_e getListSourceClasses(std::vector<am_SourceClass_s>& listSourceClasses) const =0;
+		/**
+		 * returns a list of all handles

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listHandles
+		 */
+		virtual am_Error_e getListHandles(std::vector<am_Handle_s>& listHandles) const =0;
+		/**
+		 * returns a list of all crossfaders

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listCrossfaders
+		 */
+		virtual am_Error_e getListCrossfaders(std::vector<am_Crossfader_s>& listCrossfaders) const =0;
+		/**
+		 * returns a list of  gateways

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listGateways
+		 */
+		virtual am_Error_e getListGateways(std::vector<am_Gateway_s>& listGateways) const =0;
+		/**
+		 * returns a list of all sink classes

+		 * @return E_OK on success, E_DATABASE_ERROR on error
+		 * 
+		 * @param listSinkClasses
+		 */
+		virtual am_Error_e getListSinkClasses(std::vector<am_SinkClass_s>& listSinkClasses) const =0;
+		/**
+		 * returns the list of SystemProperties
+		 * 
+		 * @param listSystemProperties
+		 */
+		virtual am_Error_e getListSystemProperties(std::vector<am_SystemProperty_s>& listSystemProperties) const =0;
+		/**
+		 * sets the command interface to ready 
+		 */
+		virtual void setCommandReady() =0;
+		/**
+		 * sets the routinginterface to  ready.
+		 */
+		virtual void setRoutingReady() =0;
+
+	};
+}
+#endif // !defined(EA_6440518C_5204_4a7c_A4B6_21BF187D8876__INCLUDED_)
diff --git a/includes/control/ControlSendInterface.h b/includes/control/ControlSendInterface.h
new file mode 100644
index 0000000..368a662
--- /dev/null
+++ b/includes/control/ControlSendInterface.h
@@ -0,0 +1,329 @@
+/**

+* Copyright (C) 2011, BMW AG

+*

+* GeniviAudioMananger

+*

+* \file  

+*

+* \date 20-Oct-2011 3:42:04 PM

+* \author Christian Mueller (christian.ei.mueller@bmw.de)

+*

+* \section License

+* GNU Lesser General Public License, version 2.1, with special exception (GENIVI clause)

+* Copyright (C) 2011, BMW AG Christian M?ller  Christian.ei.mueller@bmw.de

+*

+* This program is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License, version 2.1, as published by the Free Software Foundation.

+* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License, version 2.1, for more details.

+* You should have received a copy of the GNU Lesser General Public License, version 2.1, along with this program; if not, see <http://www.gnu.org/licenses/lgpl-2.1.html>.

+* Note that the copyright holders assume that the GNU Lesser General Public License, version 2.1, may also be applicable to programs even in cases in which the program is not a library in the technical sense.

+* Linking AudioManager statically or dynamically with other modules is making a combined work based on AudioManager. You may license such other modules under the GNU Lesser General Public License, version 2.1. If you do not want to license your linked modules under the GNU Lesser General Public License, version 2.1, you may use the program under the following exception.

+* As a special exception, the copyright holders of AudioManager give you permission to combine AudioManager with software programs or libraries that are released under any license unless such a combination is not permitted by the license of such a software program or library. You may copy and distribute such a system following the terms of the GNU Lesser General Public License, version 2.1, including this special exception, for AudioManager and the licenses of the other code concerned.

+* Note that people who make modified versions of AudioManager are not obligated to grant this special exception for their modified versions; it is their choice whether to do so. The GNU Lesser General Public License, version 2.1, gives permission to release a modified version without this exception; this exception also makes it possible to release a modified version which carries forward this exception.

+*

+* THIS CODE HAS BEEN GENERATED BY ENTERPRISE ARCHITECT GENIVI MODEL. PLEASE CHANGE ONLY IN ENTERPRISE ARCHITECT AND GENERATE AGAIN

+*/

+#if !defined(EA_8234D3A3_5F5A_46e0_874E_380BD260B451__INCLUDED_)

+#define EA_8234D3A3_5F5A_46e0_874E_380BD260B451__INCLUDED_

+

+#include <vector>

+#include <string>

+#include "../audiomanagertypes.h"

+#include "ControlReceiveInterface.h"
+
+namespace am {
+	/**
+	 * This interface is presented by the AudioManager controller.

+	 * All the hooks represent system events that need to be handled. The callback functions are used to handle for example answers to function calls on the AudioManagerCoreInterface.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:14 PM
+	 */
+	class ControlSendInterface
+	{
+
+	public:
+		/**
+		 * Starts up the controller.
+		 * 
+		 * @param controlreceiveinterface    This is a pointer to the ControlReceiveInterface so that the controller knows to whom to communicate.
+		 */
+		virtual am_Error_e startupController(ControlReceiveInterface* controlreceiveinterface) =0;
+		/**
+		 * stops the controller
+		 */
+		virtual am_Error_e stopController() =0;
+		/**
+		 * This hook is fired when all plugins have been loaded.
+		 */
+		virtual void hookAllPluginsLoaded() =0;
+		/**
+		 * is called when a connection request comes in via the command interface

+		 * @return E_OK on success, E_NOT_POSSIBLE on error, E_ALREADY_EXISTENT if already exists
+		 * 
+		 * @param sourceID
+		 * @param sinkID
+		 * @param mainConnectionID
+		 */
+		virtual am_Error_e hookUserConnectionRequest(const am_sourceID_t sourceID, const am_sinkID_t sinkID, am_mainConnectionID_t& mainConnectionID) =0;
+		/**
+		 * is called when a disconnection request comes in via the command interface

+		 * @return E_OK on success, E_NOT_POSSIBLE on error, E_NON_EXISTENT if connection does not exists
+		 * 
+		 * @param connectionID
+		 */
+		virtual am_Error_e hookUserDisconnectionRequest(const am_mainConnectionID_t connectionID) =0;
+		/**
+		 * sets a user MainSinkSoundProperty

+		 * @return E_OK on success, E_OUT_OF_RANGE if out of range, E_UNKNOWN on error
+		 * 
+		 * @param sinkID
+		 * @param soundProperty
+		 */
+		virtual am_Error_e hookUserSetMainSinkSoundProperty(const am_sinkID_t sinkID, const am_MainSoundProperty_s& soundProperty) =0;
+		/**
+		 * sets a user MainSourceSoundProperty

+		 * @return E_OK on success, E_OUT_OF_RANGE if out of range, E_UNKNOWN on error
+		 * 
+		 * @param sourceID
+		 * @param soundProperty
+		 */
+		virtual am_Error_e hookUserSetMainSourceSoundProperty(const am_sourceID_t sourceID, const am_MainSoundProperty_s& soundProperty) =0;
+		/**
+		 * sets a user SystemProperty

+		 * @return E_OK on success, E_OUT_OF_RANGE if out of range, E_UNKNOWN on error
+		 * 
+		 * @param property
+		 */
+		virtual am_Error_e hookUserSetSystemProperty(const am_SystemProperty_s& property) =0;
+		/**
+		 * sets a user volume

+		 * @return E_OK on success, E_OUT_OF_RANGE if out of range, E_UNKNOWN on error
+		 * 
+		 * @param SinkID
+		 * @param newVolume
+		 */
+		virtual am_Error_e hookUserVolumeChange(const am_sinkID_t SinkID, const am_mainVolume_t newVolume) =0;
+		/**
+		 * sets a user volume as increment 

+		 * @return E_OK on success, E_OUT_OF_RANGE if out of range, E_UNKNOWN on error
+		 * 
+		 * @param SinkID
+		 * @param increment    the steps
+		 */
+		virtual am_Error_e hookUserVolumeStep(const am_sinkID_t SinkID, const int16_t increment) =0;
+		/**
+		 * sets the mute state of a sink

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param sinkID
+		 * @param muteState    true=muted
+		 */
+		virtual am_Error_e hookUserSetSinkMuteState(const am_sinkID_t sinkID, const am_MuteState_e muteState) =0;
+		/**
+		 * is called when a routing adaptor registers its domain

+		 * @return E_OK on success, E_UNKNOWN on error, E_ALREADY_EXISTENT if already exists
+		 * 
+		 * @param domainData    ID is omitted here since it has not been created yet
+		 * @param domainID
+		 */
+		virtual am_Error_e hookSystemRegisterDomain(const am_Domain_s& domainData, am_domainID_t& domainID) =0;
+		/**
+		 * is called when a routing adaptor wants to derigister a domain

+		 * @return E_OK on success, E_UNKNOWN on error, E_NON_EXISTENT if not found
+		 * 
+		 * @param domainID
+		 */
+		virtual am_Error_e hookSystemDeregisterDomain(const am_domainID_t domainID) =0;
+		/**
+		 * is called when a domain registered all the elements
+		 * 
+		 * @param domainID
+		 */
+		virtual void hookSystemDomainRegistrationComplete(const am_domainID_t domainID) =0;
+		/**
+		 * is called when a routing adaptor registers a sink

+		 * @return E_OK on success, E_UNKNOWN on error, E_ALREADY_EXISTENT if already exists
+		 * 
+		 * @param sinkData    Id is omitted here, since it has not been created yet
+		 * @param sinkID
+		 */
+		virtual am_Error_e hookSystemRegisterSink(const am_Sink_s& sinkData, am_sinkID_t& sinkID) =0;
+		/**
+		 * is called when a routing adaptor deregisters a sink

+		 * @return E_OK on success, E_UNKNOWN on error, E_NON_EXISTENT if not found
+		 * 
+		 * @param sinkID
+		 */
+		virtual am_Error_e hookSystemDeregisterSink(const am_sinkID_t sinkID) =0;
+		/**
+		 * is called when a routing adaptor registers a source

+		 * @return E_OK on success, E_UNKNOWN on error, E_ALREADY_EXISTENT if already exists
+		 * 
+		 * @param sourceData    ID is omitted here since it is not yet created
+		 * @param sourceID
+		 */
+		virtual am_Error_e hookSystemRegisterSource(const am_Source_s& sourceData, am_sourceID_t& sourceID) =0;
+		/**
+		 * is called when a routing adaptor deregisters a source

+		 * @return E_OK on success, E_UNKNOWN on error, E_NON_EXISTENT if not found
+		 * 
+		 * @param sourceID
+		 */
+		virtual am_Error_e hookSystemDeregisterSource(const am_sourceID_t sourceID) =0;
+		/**
+		 * is called when a routing adaptor registers a gateway

+		 * @return E_OK on success, E_UNKNOWN on error, E_ALREADY_EXISTENT if already exists
+		 * 
+		 * @param gatewayData    gatewayID is not set here since it is not created at this point of time
+		 * @param gatewayID
+		 */
+		virtual am_Error_e hookSystemRegisterGateway(const am_Gateway_s& gatewayData, am_gatewayID_t& gatewayID) =0;
+		/**
+		 * is called when a routing adaptor deregisters a gateway

+		 * @return E_OK on success, E_UNKNOWN on error, E_NON_EXISTENT if not found
+		 * 
+		 * @param gatewayID
+		 */
+		virtual am_Error_e hookSystemDeregisterGateway(const am_gatewayID_t gatewayID) =0;
+		/**
+		 * is called when a routing adaptor registers a crossfader

+		 * @return E_OK on success, E_UNKNOWN on error, E_ALREADY_EXISTENT if already exists
+		 * 
+		 * @param crossfaderData    gatewayID is not set here since it is not created at this point of time
+		 * @param crossfaderID
+		 */
+		virtual am_Error_e hookSystemRegisterCrossfader(const am_Crossfader_s& crossfaderData, am_crossfaderID_t& crossfaderID) =0;
+		/**
+		 * is called when a routing adaptor deregisters a crossfader

+		 * @return E_OK on success, E_UNKNOWN on error, E_NON_EXISTENT if not found
+		 * 
+		 * @param crossfaderID
+		 */
+		virtual am_Error_e hookSystemDeregisterCrossfader(const am_crossfaderID_t crossfaderID) =0;
+		/**
+		 * volumeticks. therse are used to indicate volumechanges during a ramp
+		 * 
+		 * @param handle
+		 * @param sinkID
+		 * @param volume
+		 */
+		virtual void hookSystemSinkVolumeTick(const am_Handle_s handle, const am_sinkID_t sinkID, const am_volume_t volume) =0;
+		/**
+		 * volumeticks. therse are used to indicate volumechanges during a ramp
+		 * 
+		 * @param handle
+		 * @param sourceID
+		 * @param volume
+		 */
+		virtual void hookSystemSourceVolumeTick(const am_Handle_s handle, const am_sourceID_t sourceID, const am_volume_t volume) =0;
+		/**
+		 * is called when an low level interrupt changed its state
+		 * 
+		 * @param sourceID
+		 * @param interruptState
+		 */
+		virtual void hookSystemInterruptStateChange(const am_sourceID_t sourceID, const am_InterruptState_e interruptState) =0;
+		/**
+		 * id called when a sink changed its availability
+		 * 
+		 * @param sinkID
+		 * @param availability
+		 */
+		virtual void hookSystemSinkAvailablityStateChange(const am_sinkID_t sinkID, const am_Availability_s& availability) =0;
+		/**
+		 * id called when a source changed its availability
+		 * 
+		 * @param sourceID
+		 * @param availability
+		 */
+		virtual void hookSystemSourceAvailablityStateChange(const am_sourceID_t sourceID, const am_Availability_s& availability) =0;
+		/**
+		 * id called when domainstate was changed
+		 * 
+		 * @param domainID
+		 * @param state
+		 */
+		virtual void hookSystemDomainStateChange(const am_domainID_t domainID, const am_DomainState_e state) =0;
+		/**
+		 * when early data was received
+		 * 
+		 * @param data
+		 */
+		virtual void hookSystemReceiveEarlyData(const std::vector<am_EarlyData_s>& data) =0;
+		/**
+		 * this hook provides information about speed changes.

+		 * The quantization and sampling rate of the speed can be adjusted at compile time of the AudioManagerDaemon.
+		 * 
+		 * @param speed
+		 */
+		virtual void hookSystemSpeedChange(const am_speed_t speed) =0;
+		/**
+		 * this hook is fired whenever the timing information of a mainconnection has changed.
+		 * 
+		 * @param mainConnectionID
+		 * @param time
+		 */
+		virtual void hookSystemTimingInformationChanged(const am_mainConnectionID_t mainConnectionID, const am_timeSync_t time) =0;
+		/**
+		 * ack for connect
+		 * 
+		 * @param handle
+		 * @param errorID
+		 */
+		virtual void cbAckConnect(const am_Handle_s handle, const am_Error_e errorID) =0;
+		/**
+		 * ack for disconnect
+		 * 
+		 * @param handle
+		 * @param errorID
+		 */
+		virtual void cbAckDisconnect(const am_Handle_s handle, const am_Error_e errorID) =0;
+		/**
+		 * ack for crossfading
+		 * 
+		 * @param handle
+		 * @param hostsink
+		 * @param error
+		 */
+		virtual void cbAckCrossFade(const am_Handle_s handle, const am_HotSink_e hostsink, const am_Error_e error) =0;
+		/**
+		 * ack for sink volume changes
+		 * 
+		 * @param handle
+		 * @param volume
+		 * @param error
+		 */
+		virtual void cbAckSetSinkVolumeChange(const am_Handle_s handle, const am_volume_t volume, const am_Error_e error) =0;
+		/**
+		 * ack for source volume changes
+		 * 
+		 * @param handle    the handle that is connected to the volume change
+		 * @param voulme    the volume after the action ended (the desired volume if everything went right, the actual one in case of abortion)
+		 * @param error
+		 */
+		virtual void cbAckSetSourceVolumeChange(const am_Handle_s handle, const am_volume_t voulme, const am_Error_e error) =0;
+		/**
+		 * ack for setting of source states
+		 * 
+		 * @param handle
+		 * @param error
+		 */
+		virtual void cbAckSetSourceState(const am_Handle_s handle, const am_Error_e error) =0;
+		/**
+		 * ack for setting of sourcesoundproperties
+		 * 
+		 * @param handle
+		 * @param error
+		 */
+		virtual void cbAckSetSourceSoundProperty(const am_Handle_s handle, const am_Error_e error) =0;
+		/**
+		 * ack for setting of sinksoundproperties
+		 * 
+		 * @param handle
+		 * @param error
+		 */
+		virtual void cbAckSetSinkSoundProperty(const am_Handle_s handle, const am_Error_e error) =0;
+
+	};
+}
+#endif // !defined(EA_8234D3A3_5F5A_46e0_874E_380BD260B451__INCLUDED_)
diff --git a/includes/projecttypes.h b/includes/projecttypes.h
new file mode 100644
index 0000000..49e3df5
--- /dev/null
+++ b/includes/projecttypes.h
@@ -0,0 +1,150 @@
+/**

+* Copyright (C) 2011, BMW AG

+*

+* GeniviAudioMananger

+*

+* \file  

+*

+* \date 20-Oct-2011 3:42:04 PM

+* \author Christian Mueller (christian.ei.mueller@bmw.de)

+*

+* \section License

+* GNU Lesser General Public License, version 2.1, with special exception (GENIVI clause)

+* Copyright (C) 2011, BMW AG Christian M?ller  Christian.ei.mueller@bmw.de

+*

+* This program is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License, version 2.1, as published by the Free Software Foundation.

+* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License, version 2.1, for more details.

+* You should have received a copy of the GNU Lesser General Public License, version 2.1, along with this program; if not, see <http://www.gnu.org/licenses/lgpl-2.1.html>.

+* Note that the copyright holders assume that the GNU Lesser General Public License, version 2.1, may also be applicable to programs even in cases in which the program is not a library in the technical sense.

+* Linking AudioManager statically or dynamically with other modules is making a combined work based on AudioManager. You may license such other modules under the GNU Lesser General Public License, version 2.1. If you do not want to license your linked modules under the GNU Lesser General Public License, version 2.1, you may use the program under the following exception.

+* As a special exception, the copyright holders of AudioManager give you permission to combine AudioManager with software programs or libraries that are released under any license unless such a combination is not permitted by the license of such a software program or library. You may copy and distribute such a system following the terms of the GNU Lesser General Public License, version 2.1, including this special exception, for AudioManager and the licenses of the other code concerned.

+* Note that people who make modified versions of AudioManager are not obligated to grant this special exception for their modified versions; it is their choice whether to do so. The GNU Lesser General Public License, version 2.1, gives permission to release a modified version without this exception; this exception also makes it possible to release a modified version which carries forward this exception.

+*

+* THIS CODE HAS BEEN GENERATED BY ENTERPRISE ARCHITECT GENIVI MODEL. PLEASE CHANGE ONLY IN ENTERPRISE ARCHITECT AND GENERATE AGAIN

+*/

+#if !defined(EA_DE721E5B_F385_42e5_9347_0A683B877C1D__INCLUDED_)

+#define EA_DE721E5B_F385_42e5_9347_0A683B877C1D__INCLUDED_

+

+namespace am {

+	/**

+	 * This enum classifies the format in which data is exchanged within a connection. The enum itself is project specific although there are some Genivi standard formats defined.

+	 * @author christian

+	 * @version 1.0

+	 * @created 08-Dec-2011 1:05:12 PM

+	 */

+	enum am_ConnectionFormat_e

+	{

+		CF_STEREO = 0,

+		CF_MONO,

+		CF_ANALOG,

+		CF_MAX,

+		CF_MIN = CF_STEREO

+	};

+

+	/**

+	 * This enum gives the information about reason for reason for Source/Sink change

+	 * @author christian

+	 * @version 1.0

+	 * @created 08-Dec-2011 1:05:12 PM

+	 */

+	enum am_AvailabilityReason_e

+	{

+		AR_NEWMEDIA = 0,

+		AR_SAMEMEDIA,

+		AR_NOMEDIA,

+		AR_UNKNOWN,

+		AR_TEMPERATURE,

+		AR_VOLTAGE,

+		AR_MAX,

+		AR_MIN = AR_NEWMEDIA

+	};

+

+	/**

+	 * product specific identifier of property

+	 * @author christian

+	 * @version 1.0

+	 * @created 08-Dec-2011 1:05:12 PM

+	 */

+	enum am_ClassProperty_e

+	{

+		/**

+		 * defines the source type of a source. Project specific, could be for example differentiation between interrupt source and main source.

+		 */

+		CP_SOURCE_TYPE = 0,

+		/**

+		 * defines the SINK_TYPE. Project specific

+		 */

+		CP_SINK_TYPE,

+		CP_MAX,

+		CP_MIN = CP_SOURCE_TYPE

+	};

+

+	/**

+	 * The given ramp types here are just a possiblity. for products, different ramp types can be defined here.

+	 * It is in the responsibility of the product to make sure that the routing plugins are aware of the ramp types used.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:12 PM
+	 */
+	enum am_RampType_e
+	{
+		/**
+		 * this ramp type triggers a direct setting of the value without a ramp
+		 */
+		RAMP_DIRECT = 0,
+		/**
+		 * This ramp type will set the volume as fast as possible.  
+		 */
+		RAMP_NO_BLOB,
+		RAMP_LOG,
+		RAMP_STRAIGHT,
+		RAMP_MAX,
+		RAMP_MIN = RAMP_DIRECT
+	};
+
+	/**
+	 * sound properties. Within genivi only the standard properties are defined, for products these need to be extended.
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:12 PM
+	 */
+	enum am_SoundPropertyType_e
+	{
+		SP_TREBLE = 0,
+		SP_MID,
+		SP_BASS,
+		SP_MAX,
+		SP_MIN = SP_TREBLE
+	};
+
+	/**
+	 * Here are all SoundProperties that can be set via the CommandInterface. Product specific
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:12 PM
+	 */
+	enum am_MainSoundPropertyType_e
+	{
+		/**
+		 * gives the navigation offset in percent
+		 */
+		MSP_NAVIGATION_OFFSET = 0,
+		MSP_TEST,
+		MSP_MAX,
+		MSP_MIN = MSP_NAVIGATION_OFFSET
+	};
+
+	/**
+	 * describes the different system properties. Project specific
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:12 PM
+	 */
+	enum am_SystemPropertyType_e
+	{
+		SYP_TEST = 0,
+		SYP_MAX,
+		SYP_MIN = SYP_TEST
+	};
+}
+#endif // !defined(EA_DE721E5B_F385_42e5_9347_0A683B877C1D__INCLUDED_)
diff --git a/includes/routing/RoutingReceiveInterface.h b/includes/routing/RoutingReceiveInterface.h
new file mode 100644
index 0000000..f2c531b
--- /dev/null
+++ b/includes/routing/RoutingReceiveInterface.h
@@ -0,0 +1,280 @@
+/**

+* Copyright (C) 2011, BMW AG

+*

+* GeniviAudioMananger

+*

+* \file  

+*

+* \date 20-Oct-2011 3:42:04 PM

+* \author Christian Mueller (christian.ei.mueller@bmw.de)

+*

+* \section License

+* GNU Lesser General Public License, version 2.1, with special exception (GENIVI clause)

+* Copyright (C) 2011, BMW AG Christian M?ller  Christian.ei.mueller@bmw.de

+*

+* This program is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License, version 2.1, as published by the Free Software Foundation.

+* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License, version 2.1, for more details.

+* You should have received a copy of the GNU Lesser General Public License, version 2.1, along with this program; if not, see <http://www.gnu.org/licenses/lgpl-2.1.html>.

+* Note that the copyright holders assume that the GNU Lesser General Public License, version 2.1, may also be applicable to programs even in cases in which the program is not a library in the technical sense.

+* Linking AudioManager statically or dynamically with other modules is making a combined work based on AudioManager. You may license such other modules under the GNU Lesser General Public License, version 2.1. If you do not want to license your linked modules under the GNU Lesser General Public License, version 2.1, you may use the program under the following exception.

+* As a special exception, the copyright holders of AudioManager give you permission to combine AudioManager with software programs or libraries that are released under any license unless such a combination is not permitted by the license of such a software program or library. You may copy and distribute such a system following the terms of the GNU Lesser General Public License, version 2.1, including this special exception, for AudioManager and the licenses of the other code concerned.

+* Note that people who make modified versions of AudioManager are not obligated to grant this special exception for their modified versions; it is their choice whether to do so. The GNU Lesser General Public License, version 2.1, gives permission to release a modified version without this exception; this exception also makes it possible to release a modified version which carries forward this exception.

+*

+* THIS CODE HAS BEEN GENERATED BY ENTERPRISE ARCHITECT GENIVI MODEL. PLEASE CHANGE ONLY IN ENTERPRISE ARCHITECT AND GENERATE AGAIN

+*/

+#if !defined(EA_15945485_9FE2_405e_BFCC_96F24D2487F5__INCLUDED_)

+#define EA_15945485_9FE2_405e_BFCC_96F24D2487F5__INCLUDED_

+

+#include <vector>

+#include <string>

+#include "../audiomanagertypes.h"

+class DBusWrapper;
+
+namespace am {
+	/**
+	 * Routing Receive sendInterface description. This class implements everything from RoutingAdapter -> Audiomanager
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:58:24 PM
+	 */
+	class RoutingReceiveInterface
+	{
+
+	public:
+		/**
+		 * acknowledges a asyncConnect
+		 * 
+		 * @param handle
+		 * @param connectionID
+		 * @param error    E_OK on success, E_ABORTED if action was aborted, E_UNKNOWN on error
+		 */
+		virtual void ackConnect(const am_Handle_s handle, const am_connectionID_t connectionID, const am_Error_e error) =0;
+		/**
+		 * acknowledges a asyncDisconnect
+		 * 
+		 * @param handle
+		 * @param connectionID
+		 * @param error    E_OK on success, E_ABORTED if action was aborted, E_UNKNOWN on error
+		 */
+		virtual void ackDisconnect(const am_Handle_s handle, const am_connectionID_t connectionID, const am_Error_e error) =0;
+		/**
+		 * acknowledges a asyncsetSinkVolume 
+		 * 
+		 * @param handle
+		 * @param volume    The current actual value that is set 
+		 * @param error    E_OK on success, E_ABORTED if action was aborted, E_UNKNOWN on error
+		 */
+		virtual void ackSetSinkVolumeChange(const am_Handle_s handle, const am_volume_t volume, const am_Error_e error) =0;
+		/**
+		 * acknowledges a asyncsetSourceVolume
+		 * 
+		 * @param handle    handle that belongs to the change 
+		 * @param volume    the current volume
+		 * @param error    E_OK on success, E_ABORTED if action was aborted, E_UNKNOWN on error
+		 */
+		virtual void ackSetSourceVolumeChange(const am_Handle_s handle, const am_volume_t volume, const am_Error_e error) =0;
+		/**
+		 * acknowlegde for asyncSetSourceState
+		 * 
+		 * @param handle
+		 * @param error    E_OK on success, E_ABORTED if action was aborted, E_UNKNOWN on error
+		 */
+		virtual void ackSetSourceState(const am_Handle_s handle, const am_Error_e error) =0;
+		/**
+		 * acknowledges asyncSetSinkSoundProperty
+		 * 
+		 * @param handle
+		 * @param error    E_OK on success, E_ABORTED if action was aborted, E_UNKNOWN on error
+		 */
+		virtual void ackSetSinkSoundProperty(const am_Handle_s handle, const am_Error_e error) =0;
+		/**
+		 * acknowledges asyncSetSourceSoundProperty
+		 * 
+		 * @param handle
+		 * @param error    E_OK on success, E_ABORTED if action was aborted, E_UNKNOWN on error
+		 */
+		virtual void ackSetSourceSoundProperty(const am_Handle_s handle, const am_Error_e error) =0;
+		/**
+		 * acknowledges asyncCrossFade
+		 * 
+		 * @param handle
+		 * @param hotSink    this is the current hot sink, HS_INTERMEDIATE is here when a crossfading action did not reach the end
+		 * @param error    E_OK on success, E_ABORTED if action was aborted, E_UNKNOWN on error
+		 */
+		virtual void ackCrossFading(const am_Handle_s handle, const am_HotSink_e hotSink, const am_Error_e error) =0;
+		/**
+		 * acknowledges a volume tick. This can be used to display volumechanges during ramps
+		 * 
+		 * @param handle
+		 * @param sourceID
+		 * @param volume
+		 */
+		virtual void ackSourceVolumeTick(const am_Handle_s handle, const am_sourceID_t sourceID, const am_volume_t volume) =0;
+		/**
+		 * acknowledges a volume tick. This can be used to display volumechanges during ramps
+		 * 
+		 * @param handle
+		 * @param sinkID
+		 * @param volume
+		 */
+		virtual void ackSinkVolumeTick(const am_Handle_s handle, const am_sinkID_t sinkID, const am_volume_t volume) =0;
+		/**
+		 * This function returns the ID to the given domainName. If already a domain is registered with this name, it will return the corresponding ID, if not it will reserve an ID but not register the domain. The other parameters of the domain will be overwritten when the domain is registered.

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param name
+		 * @param domainID
+		 */
+		virtual am_Error_e peekDomain(const std::string& name, am_domainID_t& domainID) =0;
+		/**
+		 * registers a domain

+		 * @return E_OK on succes, E_ALREADY_EXISTENT if already registered E_UNKOWN on error
+		 * 
+		 * @param domainData    domainID in am_Domain_s must be 0!
+		 * @param domainID
+		 */
+		virtual am_Error_e registerDomain(const am_Domain_s& domainData, am_domainID_t& domainID) =0;
+		/**
+		 * deregisters a domain. All sources, sinks, gateways and crossfaders from that domain will be removed as well.

+		 * @return E_OK on succes, E_NON_EXISTENT if not found E_UNKOWN on error
+		 * 
+		 * @param domainID    < the nonde of the bus
+		 */
+		virtual am_Error_e deregisterDomain(const am_domainID_t domainID) =0;
+		/**
+		 * registers a gateway. @return E_OK on succes, E_ALREADY_EXISTENT if already registered E_UNKOWN on error
+		 * 
+		 * @param gatewayData    In a fixed setup, the gatewayID must be below 100. In a dynamic setup, the gatewayID shall be 0. listSourceFormats and listSinkFormats are empty at registration time. Values are taken over when sources and sinks are registered.

+		 * 

+		 * 
+		 * @param gatewayID
+		 */
+		virtual am_Error_e registerGateway(const am_Gateway_s& gatewayData, am_gatewayID_t& gatewayID) =0;
+		/**
+		 * deregisters a gateway. Also removes all sinks and sources of the controlling domain.

+		 * @return E_OK on succes, E_NON_EXISTENT if not found E_UNKOWN on error
+		 * 
+		 * @param gatewayID    domainID of the control domain
+		 */
+		virtual am_Error_e deregisterGateway(const am_gatewayID_t gatewayID) =0;
+		/**
+		 * This function returns the ID to the given sinkName. If already a sink is registered with this name, it will return the corresponding ID, if not it will reserve an ID but not register the sink. The other parameters of the sink will be overwritten when the sink is registered.

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param name    ID is not valid since not created yet
+		 * @param sinkID
+		 */
+		virtual am_Error_e peekSink(const std::string& name, am_sinkID_t& sinkID) =0;
+		/**
+		 * Registers a sink. If the sink is part of a gateway, the listconnectionFormats is copied to the gatewayInformation

+		 * @return E_OK on succes, E_ALREADY_EXISTENT if already registered E_UNKOWN on error
+		 * 
+		 * @param sinkData    In a fixed setup, the sinkID within am_Sink_s must be below 100. In a dynamic setup the sinkID must be 0 in am_Sink_s.
+		 * @param sinkID
+		 */
+		virtual am_Error_e registerSink(const am_Sink_s& sinkData, am_sinkID_t& sinkID) =0;
+		/**
+		 * deregisters a sink.

+		 * @return E_OK on succes, E_NON_EXISTENT if not found E_UNKOWN on error
+		 * 
+		 * @param sinkID
+		 */
+		virtual am_Error_e deregisterSink(const am_sinkID_t sinkID) =0;
+		/**
+		 * This function returns the ID to the given sourceName. If already a source is registered with this name, it will return the corresponding ID, if not it will reserve an ID but not register the source. The other parameters of the source will be overwritten when the source is registered.

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param name
+		 * @param sourceID
+		 */
+		virtual am_Error_e peekSource(const std::string& name, am_sourceID_t& sourceID) =0;
+		/**
+		 * registers a source.  If the source is part of a gateway, the listconnectionFormats is copied to the gatewayInformation

+		 * @return E_OK on success, E_UNKNOWN on error, E_ALREADY_EXIST if either name or sourceID already exists
+		 * 
+		 * @param sourceData    In a fixed setup, the sourceID within am_Source_s must be below 100. In a dynamic setup the sourceID must be 0 in am_Source_s
+		 * @param sourceID
+		 */
+		virtual am_Error_e registerSource(const am_Source_s& sourceData, am_sourceID_t& sourceID) =0;
+		/**
+		 * deregisters a source

+		 * @return E_OK on succes, E_NON_EXISTENT if not found E_UNKOWN on error
+		 * 
+		 * @param sourceID
+		 */
+		virtual am_Error_e deregisterSource(const am_sourceID_t sourceID) =0;
+		/**
+		 * this function registers a crossfader.

+		 * @return E_OK on succes, E_ALREADY_EXISTENT if already registered E_UNKOWN on error
+		 * 
+		 * @param crossfaderData    in a fixed setup, the crossfaderID must be below 100. In a dynamic setup the crossfasderID shall be 0
+		 * @param crossfaderID
+		 */
+		virtual am_Error_e registerCrossfader(const am_Crossfader_s& crossfaderData, am_crossfaderID_t& crossfaderID) =0;
+		/**
+		 * this function deregisters a crossfader. removes all sources and sinks assiated as well.

+		 * @return E_OK on succes, E_NON_EXISTENT if not found E_UNKOWN on error
+		 * 
+		 * @param crossfaderID
+		 */
+		virtual am_Error_e deregisterCrossfader(const am_crossfaderID_t crossfaderID) =0;
+		/**
+		 * is called when a low level interrupt changes it status.
+		 * 
+		 * @param sourceID
+		 * @param interruptState
+		 */
+		virtual void hookInterruptStatusChange(const am_sourceID_t sourceID, const am_InterruptState_e interruptState) =0;
+		/**
+		 * This hook is called when all elements from a domain are registered.

+		 * Is used by the Controller to know when all expected domains are finally registered
+		 * 
+		 * @param domainID
+		 */
+		virtual void hookDomainRegistrationComplete(const am_domainID_t domainID) =0;
+		/**
+		 * is called when a sink changes its availability
+		 * 
+		 * @param sinkID
+		 * @param availability
+		 */
+		virtual void hookSinkAvailablityStatusChange(const am_sinkID_t sinkID, const am_Availability_s& availability) =0;
+		/**
+		 * is called when a source changes its availability
+		 * 
+		 * @param sourceID
+		 * @param availability
+		 */
+		virtual void hookSourceAvailablityStatusChange(const am_sourceID_t sourceID, const am_Availability_s& availability) =0;
+		/**
+		 * is called when a domain changes its status. This used for early domains only
+		 * 
+		 * @param domainID
+		 * @param domainState
+		 */
+		virtual void hookDomainStateChange(const am_domainID_t domainID, const am_DomainState_e domainState) =0;
+		/**
+		 * is called when the timinginformation (delay) changed for a connection.
+		 * 
+		 * @param connectionID
+		 * @param delay
+		 */
+		virtual void hookTimingInformationChanged(const am_connectionID_t connectionID, const am_timeSync_t delay) =0;
+		/**
+		 * this function is used to send out all data that has been changed in an early state.

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param earlyData
+		 */
+		virtual am_Error_e sendChangedData(const std::vector<am_EarlyData_s>& earlyData) =0;
+		/**
+		 * this function is used to retrieve the pointer to the dBusConnectionWrapper

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param dbusConnectionWrapper    This is a wrapper class that is needed to keep dbus inclusions away from the interface. The DBusWrapperClass will return the pointer to the DbusConnection call (getDBusConnection)
+		 */
+		virtual am_Error_e getDBusConnectionWrapper(DBusWrapper* dbusConnectionWrapper) const =0;
+
+	};
+}
+#endif // !defined(EA_15945485_9FE2_405e_BFCC_96F24D2487F5__INCLUDED_)
diff --git a/includes/routing/RoutingSendInterface.h b/includes/routing/RoutingSendInterface.h
new file mode 100644
index 0000000..8433726
--- /dev/null
+++ b/includes/routing/RoutingSendInterface.h
@@ -0,0 +1,165 @@
+/**

+* Copyright (C) 2011, BMW AG

+*

+* GeniviAudioMananger

+*

+* \file  

+*

+* \date 20-Oct-2011 3:42:04 PM

+* \author Christian Mueller (christian.ei.mueller@bmw.de)

+*

+* \section License

+* GNU Lesser General Public License, version 2.1, with special exception (GENIVI clause)

+* Copyright (C) 2011, BMW AG Christian M?ller  Christian.ei.mueller@bmw.de

+*

+* This program is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License, version 2.1, as published by the Free Software Foundation.

+* This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License, version 2.1, for more details.

+* You should have received a copy of the GNU Lesser General Public License, version 2.1, along with this program; if not, see <http://www.gnu.org/licenses/lgpl-2.1.html>.

+* Note that the copyright holders assume that the GNU Lesser General Public License, version 2.1, may also be applicable to programs even in cases in which the program is not a library in the technical sense.

+* Linking AudioManager statically or dynamically with other modules is making a combined work based on AudioManager. You may license such other modules under the GNU Lesser General Public License, version 2.1. If you do not want to license your linked modules under the GNU Lesser General Public License, version 2.1, you may use the program under the following exception.

+* As a special exception, the copyright holders of AudioManager give you permission to combine AudioManager with software programs or libraries that are released under any license unless such a combination is not permitted by the license of such a software program or library. You may copy and distribute such a system following the terms of the GNU Lesser General Public License, version 2.1, including this special exception, for AudioManager and the licenses of the other code concerned.

+* Note that people who make modified versions of AudioManager are not obligated to grant this special exception for their modified versions; it is their choice whether to do so. The GNU Lesser General Public License, version 2.1, gives permission to release a modified version without this exception; this exception also makes it possible to release a modified version which carries forward this exception.

+*

+* THIS CODE HAS BEEN GENERATED BY ENTERPRISE ARCHITECT GENIVI MODEL. PLEASE CHANGE ONLY IN ENTERPRISE ARCHITECT AND GENERATE AGAIN

+*/

+#if !defined(EA_BEE41204_65B8_46cf_BB6A_9953BE0EC53A__INCLUDED_)

+#define EA_BEE41204_65B8_46cf_BB6A_9953BE0EC53A__INCLUDED_

+

+#include <vector>

+#include <string>

+#include "../audiomanagertypes.h"

+
+
+#include "RoutingReceiveInterface.h"
+
+namespace am {
+	/**
+	 *  This class implements everything from Audiomanager -> RoutingAdapter
+	 * @author christian
+	 * @version 1.0
+	 * @created 08-Dec-2011 1:05:14 PM
+	 */
+	class RoutingSendInterface
+	{
+
+	public:
+		/**
+		 * starts up the interface. In the implementations, here is the best place for init routines.
+		 * 
+		 * @param routingreceiveinterface    pointer to the receive interface
+		 */
+		virtual void startupRoutingInterface(RoutingReceiveInterface* routingreceiveinterface) =0;
+		/**
+		 * indicates that the interface is now ready to be used. Should be used as trigger to register all sinks, sources, etc...
+		 */
+		virtual void routingInterfacesReady() =0;
+		/**
+		 * is used to indicate the rundown of the system
+		 */
+		virtual void routingInterfacesRundown() =0;
+		/**
+		 * aborts an asynchronous action.

+		 * @return E_OK on success, E_UNKNOWN on error, E_NON_EXISTENT if handle was not found
+		 * 
+		 * @param handle
+		 */
+		virtual am_Error_e asyncAbort(const am_Handle_s handle) =0;
+		/**
+		 * connects a source to a sink

+		 * @return E_OK on success, E_UNKNOWN on error, E_WRONG_FORMAT in case am_ConnectionFormat_e does not match
+		 * 
+		 * @param handle
+		 * @param connectionID
+		 * @param sourceID
+		 * @param sinkID
+		 * @param connectionFormat
+		 */
+		virtual am_Error_e asyncConnect(const am_Handle_s handle, const am_connectionID_t connectionID, const am_sourceID_t sourceID, const am_sinkID_t sinkID, const am_ConnectionFormat_e connectionFormat) =0;
+		/**
+		 * disconnect a connection with given connectionID

+		 * @return E_OK on success, E_UNKNOWN on error, E_NON_EXISTENT if connection was not found
+		 * 
+		 * @param handle
+		 * @param connectionID
+		 */
+		virtual am_Error_e asyncDisconnect(const am_Handle_s handle, const am_connectionID_t connectionID) =0;
+		/**
+		 * this method is used to set the volume of a sink. This function is used to drive ramps, to mute or unmute or directly set the value. The difference is made through the ramptype.

+		 * @return E_OK on success, E_UNKNOWN on error, E_OUT_OF_RANGE if new volume is out of range
+		 * 
+		 * @param handle
+		 * @param sinkID
+		 * @param volume
+		 * @param ramp
+		 * @param time
+		 */
+		virtual am_Error_e asyncSetSinkVolume(const am_Handle_s handle, const am_sinkID_t sinkID, const am_volume_t volume, const am_RampType_e ramp, const am_time_t time) =0;
+		/**
+		 * sets the volume of a source. This method is used to set the volume of a sink. This function is used to drive ramps, to mute or unmute or directly set the value. The difference is made through the ramptype.

+		 * @return E_OK on success, E_UNKNOWN on error, E_OUT_OF_RANGE if volume is out of range.

+		 * triggers the acknowledge ackSourceVolumeChange
+		 * 
+		 * @param handle
+		 * @param sourceID
+		 * @param volume
+		 * @param ramp
+		 * @param time
+		 */
+		virtual am_Error_e asyncSetSourceVolume(const am_Handle_s handle, const am_sourceID_t sourceID, const am_volume_t volume, const am_RampType_e ramp, const am_time_t time) =0;
+		/**
+		 * This function is used to set the source state of a particular source.

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param handle
+		 * @param sourceID
+		 * @param state
+		 */
+		virtual am_Error_e asyncSetSourceState(const am_Handle_s handle, const am_sourceID_t sourceID, const am_SourceState_e state) =0;
+		/**
+		 * this function sets the sinksoundproperty.

+		 * @return E_OK on success, E_UNKNOWN on error, E_OUT_OF_RANGE in case the propery value is out of range
+		 * 
+		 * @param handle
+		 * @param soundProperty
+		 * @param sinkID
+		 */
+		virtual am_Error_e asyncSetSinkSoundProperty(const am_Handle_s handle, const am_SoundProperty_s& soundProperty, const am_sinkID_t sinkID) =0;
+		/**
+		 * this function sets the sourcesoundproperty.

+		 * @return E_OK on success, E_UNKNOWN on error, E_OUT_OF_RANGE in case the propery value is out of range
+		 * 
+		 * @param handle
+		 * @param soundProperty
+		 * @param sourceID
+		 */
+		virtual am_Error_e asyncSetSourceSoundProperty(const am_Handle_s handle, const am_SoundProperty_s& soundProperty, const am_sourceID_t sourceID) =0;
+		/**
+		 * this function triggers crossfading.

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param handle
+		 * @param crossfaderID
+		 * @param hotSink
+		 * @param rampType
+		 * @param time
+		 */
+		virtual am_Error_e asyncCrossFade(const am_Handle_s handle, const am_crossfaderID_t crossfaderID, const am_HotSink_e hotSink, const am_RampType_e rampType, const am_time_t time) =0;
+		/**
+		 * this function is used for early and late audio functions to set the domain state

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param domainID
+		 * @param domainState
+		 */
+		virtual am_Error_e setDomainState(const am_domainID_t domainID, const am_DomainState_e domainState) =0;
+		/**
+		 * this method is used to retrieve the busname during startup of the plugin. Needs to be implemented

+		 * @return E_OK on success, E_UNKNOWN on error
+		 * 
+		 * @param BusName
+		 */
+		virtual am_Error_e returnBusName(std::string& BusName) const =0;
+
+	};
+}
+#endif // !defined(EA_BEE41204_65B8_46cf_BB6A_9953BE0EC53A__INCLUDED_)